Christie Digital Systems Projector 020 000141 01 User Manual
LX1000  
U S E R M A N U A L  
020-000141-01  
Download from Www.Somanuals.com. All Manuals Search And Download.  
= Lens not included.  
User Manual  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features and Design  
This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This  
projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD)  
technology.  
U Multilanguage Menu Display  
U Functionally Rich  
Operation menu is available in 12 languages;  
English, German, French, Italian, Spanish,  
Portuguese, Dutch, Swedish, Russian, Chinese,  
Korean, and Japanese (p.48).  
This projector has many useful functions such  
as lens shifting, ceiling and rear projection,  
perpendicular omnidirectional projection, variety of  
lens options, etc.  
U Logo Function  
U Simple Computer System Setting  
The Logo function allows you to customize the  
screen logo (pp.49–50). You can capture an image  
for the screen logo and use it for the starting-up  
display or between presentations.  
The projector has the Multi-scan system to  
conform to almost all computer output signals  
quickly (p.34). Supported resolution up to WUXGA.  
U Useful Functions for Presentation  
U Motor-driven Lens Shift  
Digital zoom function allows you to focus on the  
crucial information during a presentation (pp.29,  
40).  
Projection lens can be moved up, down, right and  
left with the motor-driven lens shift function. This  
function makes it easy to provide projected image  
where you want. Zoom and focus can also be  
adjusted with a motor-driven operation. (p.27)  
U Security Function  
The Security function helps you to ensure security  
of the projector. With the Key lock function, you can  
lock the operation on the side control or remote  
control (p.53). PIN code lock functions prevents  
unauthorized use of the projector (pp.53–54).  
*Zoom and focus functions may not operate  
depending on the optional lens.  
U MultiVersatile Platform  
This projector applies various input/output  
terminals and 2 terminal slots for expansion to tune  
to diversity of signals from computers and video  
equipment (p.19). For optional interface boards,  
contact sales dealer where you purchased the  
projector.  
U Lamp Control  
Brightness of the projection lamp can be selected  
(p.51).  
U Power Management  
U Shutter Function  
The Power management function reduces power  
consumption and maintains lamp life (p.52).  
The projector is equipped with the shutter that  
provides complete blackness for a while the  
projected image is not needed with keeping the  
projector on. The Shutter management function  
allows you to set the timer. It prevents leaving  
the projector on with the shutter closed for a long  
time. (p.55)  
U Automatic Filter Replacement Function  
The projector monitors the condition of the filter  
and replaces a filter automatically when it detects  
the clogging.  
U Network board (Optional)  
Network board is an optional product to control  
and set up the projector via the network cables  
with the web browser on your computer. It can  
be controlled and set up the projector remotely.  
Contact the sales dealer where you purchased this  
projector for optional parts.  
U Helpful Maintenance Functions  
Lamp and filter maintenance functions provide for  
better and proper maintenance of the projector.  
ꢀNote:  
s4HE /Nꢀ3CREEN -ENU AND FIGURES IN THIS MANUAL MAY DIFFER SLIGHTLY FROM THE PRODUCTꢁ  
s4HE CONTENTS OF THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICEꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Features and Design. . . . . . . . . . . . . . . . 2  
Table of Contents . . . . . . . . . . . . . . . . . . 3  
ToThe Owner . . . . . . . . . . . . . . . . . . . . . 4  
Safety Instructions . . . . . . . . . . . . . . . . . 5  
Computer Input . . . . . . . . . . . . . . . . . . 34  
Computer System Selection  
34  
35  
36  
38  
39  
Auto PC Adjustment  
Manual PC Adjustment  
Image Level Selection  
Screen Size Adjustment  
Air Circulation  
6
7
8
Installing the Projector in Proper Directions  
Moving the Projector  
Video Input . . . . . . . . . . . . . . . . . . . . . . 41  
Video System Selection  
Image Level Selection  
Screen Size Adjustment  
41  
42  
43  
Compliance . . . . . . . . . . . . . . . . . . . . . . . 9  
Part Names and Functions. . . . . . . . . . 10  
Front  
10  
10  
11  
12  
12  
13  
14  
15  
15  
15  
16  
Picture Image . . . . . . . . . . . . . . . . . . . . 45  
Back  
Image Adjustment  
45  
Terminals and Connectors  
Side Control and Indicators  
Side Control  
Setting. . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Setting  
48  
Maintenance and Care . . . . . . . . . . . . . 57  
Indicators  
Filter Instructions  
57  
58  
59  
59  
60  
61  
62  
64  
64  
65  
Remote Control  
Replacing the Filter Cartridge  
Resetting the Filter Counter  
Resetting the Scroll Counter  
Lamp Management  
Remote Control Battery Installation  
Remote Control Receivers and Operating Range  
Wired Remote Control  
Remote Control Code  
Lamp Replacement  
Installation . . . . . . . . . . . . . . . . . . . . . . 17  
Resetting the Lamp Counter  
Cleaning the Projection Lens  
Cleaning the Projector Cabinet  
Warning Indicators  
Lens Installation  
17  
17  
18  
18  
19  
20  
21  
22  
Positioning Projector  
Lens Shift Adjustment  
Picture Level and Pitch Adjustment  
Terminals of Projector  
Appendix . . . . . . . . . . . . . . . . . . . . . . . . 66  
Troubleshooting  
66  
69  
72  
75  
77  
78  
79  
80  
81  
Connecting to Computer  
Connecting to Video Equipment  
Connecting the AC Power Cord  
MenuTree  
Indicators and Projector Condition  
Compatible Computer Specifications  
Technical Specifications  
Optional Parts  
Basic Operation . . . . . . . . . . . . . . . . . . 23  
Turning On the Projector  
23  
24  
25  
26  
27  
29  
Turning Off the Projector  
How to Operate the On-Screen Menu  
Menu Bar  
Configurations ofTerminals  
PIN Code Number Memo  
Dimensions  
Operating with Projector Control  
Operating with Remote Control  
Input Selection . . . . . . . . . . . . . . . . . . . 31  
Input  
31  
32  
33  
Computer Input Source Selection  
Video Input Source Selection  
Trademarks  
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective  
corporation.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ToThe Owner  
Safety Precaution  
WARNING: LTHIS APPARATUS MUST BE EARTHED.  
Before installing and operating the projector, read this  
manual thoroughly.  
The projector provides many convenient features and  
functions. Operating the projector properly enables you to  
manage those features and maintains it in good condition for  
many years to come.  
Improper operation may result in not only shortening the  
product life, but also malfunctions, fire hazard, or other  
accidents.  
LTO REDUCETHE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT EXPOSETHIS APPLIANCETO  
RAIN OR MOISTURE.  
–
This projector produces intense light from the projection lens.  
Do not stare directly into the lens, otherwise eye damage could  
result. Be especially careful that children do not stare directly  
into the beam.  
If your projector seems to operate improperly, read this  
manual again, check operations and cable connections and  
try the solutions in the “Troubleshooting” section in the  
back of this manual. If the problem still persists, contact the  
dealer where you purchased the projector or the service  
center.  
–
–
Install the projector in a proper position. Otherwise it may  
result in a fire hazard.  
Allowing the proper amount of space on the top, sides, and  
rear of the projector cabinet is critical for proper air circulation  
and cooling of the unit. The diagrams shown here indicates the  
minimum space required. If the projector is to be built into a  
compartment or similarly enclosed, these minimum distances  
must be maintained.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
– Do not cover the ventilation slots on the projector. Heat build-  
up can reduce the service life of your projector, and can also be  
dangerous.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR  
BACK). NO USER-SERVICEABLE PARTS  
INSIDE EXCEPT LAMP REPLACEMENT.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
SIDE andTOP  
REAR  
3.3' (1m)  
3.3' (1m)  
3.3' (1m)  
3.3' (1m)  
THIS SYMBOL INDICATES THAT DANGEROUS  
VOLTAGE CONSTITUTING A RISK OF ELECTRIC  
SHOCK IS PRESENT WITHINTHIS UNIT.  
–
–
If the projector is unused for an extended time, unplug the  
projector from the power outlet.  
Do not project the same image for a long time, since the  
afterimage may remain on the LCD panels by the characteristic  
of panel.  
THIS SYMBOL INDICATES THAT THERE ARE  
IMPORTANT OPERATING AND MAINTENANCE  
INSTRUCTIONS IN THE OWNER’S MANUAL WITH  
THIS UNIT.  
CAUTION ON HANGING FROMTHE CEILING  
The symbol mark and recycling systems described below  
apply to EU countries and do not apply to countries in other  
areas of the world.  
Your product is designed and manufactured with high qual-  
ity materials and components which can be recycled and/or  
reused.  
The symbol mark means that electrical and electronic  
equipment, batteries and accumulators, at their end-of-life,  
should be disposed of separately from your household  
waste.  
When hanging the projector from the  
ceiling, clean the air intake vents and  
top of the projector periodically with a  
vacuum cleaner. If you leave the projector  
unclean for a long time, the cooling fans  
can be clogged with dust, and it may  
cause a breakdown or a disaster.  
DO NOT SET THE PROJECTOR IN GREASY, WET, OR  
SMOKY CONDITIONS SUCH AS IN A KITCHEN TO  
PREVENT A BREAKDOWN OR A DISASTER. IF THE  
PROJECTOR COMES IN CONTACT WITH OIL OR  
CHEMICALS, IT MAY BECOME DETERIORATED.  
Note:  
If a chemical symbol is printed beneath the symbol mark,  
this chemical symbol means that the battery or accumula-  
tor contains a heavy metal at a certain concentration. This  
will be indicated as follows: Hg: mercury, Cd: cadmium, Pb:  
lead.  
In the European Union there are separate  
collection systems for used electrical and  
electronic equipment, batteries and accumu-  
lators.  
Please, dispose of them correctly at your  
local community waste collection/recycling  
centre.  
CAUTION  
Not for use in a computer room as defined in the  
Standard for the Protection of Electronic Computer/Data  
Processing Equipment, ANSI/NFPA 75.  
Ne peut être utilisé dans une salle d’ordinateurs telle  
que définie dans la norme ANSI/NFPA 75 Standard for  
Protection of Electronic Computer/Data Processing  
Equipment.  
Please, help us to conserve the environment we live in!  
READ AND KEEP THIS OWNER'S MANUAL FOR LATER  
USE.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
All the safety and operating instructions should be read  
before the product is operated.  
This projector should be operated only from the type of  
power source indicated on the marking label. If you are not  
sure of the type of power supplied, consult your authorized  
dealer or local power company.  
Read all of the instructions given here and retain them for  
later use. Unplug this projector from AC power supply  
before cleaning. Do not use liquid or aerosol cleaners. Use a  
damp cloth for cleaning.  
Do not overload wall outlets and extension cords as this  
can result in fire or electric shock. Do not allow anything to  
rest on the power cord. Do not locate this projector where  
the cord may be damaged by persons walking on it.  
Follow all warnings and instructions marked on the projector.  
For added protection to the projector during a lightning  
storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet. This will  
prevent damage due to lightning and power line surges.  
Do not attempt to service this projector yourself as opening  
or removing covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to qualified service  
personnel.  
Unplug this projector from wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
a. When the power cord or plug is damaged or frayed.  
b. If liquid has been spilled into the projector.  
Do not expose this unit to rain or use near water... for  
example, in a wet basement, near a swimming pool, etc...  
Do not use attachments not recommended by the  
manufacturer as they may cause hazards.  
c. If the projector has been exposed to rain or water.  
d. If the projector does not operate normally by following  
the operating instructions. Adjust only those controls  
that are covered by the operating instructions as  
improper adjustment of other controls may result in  
damage and will often require extensive work by a  
qualified technician to restore the projector to normal  
operation.  
Do not place this projector on an unstable cart, stand, or  
table. The projector may fall, causing serious injury to a child  
or adult, and serious damage to the projector. Use only with  
a cart or stand recommended by the manufacturer, or sold  
with the projector. Wall or shelf mounting should follow the  
manufacturer's instructions, and should use a mounting kit  
approved by the manufacturers.  
e. If the projector has been dropped or the cabinet has  
been damaged.  
f. When the projector exhibits a distinct change in  
performance-this indicates a need for service.  
An appliance and cart combination  
should be moved with care. Quick  
stops, excessive force, and uneven  
surfaces may cause the appliance and  
cart combination to overturn.  
When replacement parts are required, be sure the service  
technician has used replacement parts specified by the  
manufacturer that have the same characteristics as the  
original part. Unauthorized substitutions may result in fire,  
electric shock, or injury to persons.  
Slots and openings in the back and bottom of the cabinet are  
provided for ventilation, to ensure reliable operation of the  
equipment and to protect it from overheating.  
Upon completion of any service or repairs to this projector,  
ask the service technician to perform routine safety  
checks to determine that the projector is in safe operating  
condition.  
The openings should never be covered with cloth or other  
materials, and the bottom opening should not be blocked  
by placing the projector on a bed, sofa, rug, or other similar  
surface. This projector should never be placed near or over a  
radiator or heat register.  
This projector should not be placed in a built-in installation  
such as a book case unless proper ventilation is provided.  
NOTE FOR CUSTOMERS INTHE US  
Never push objects of any kind into this projector through  
cabinet slots as they may touch dangerous voltage points  
or short out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the projector.  
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY  
AND MUST BE RECYCLED OR DISPOSED OFACCORDING  
TO LOCAL, STATE OR FEDERAL LAWS.  
Do not install the projector near the ventilation duct of air-  
conditioning equipment.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Air Circulation  
IMPORTANT!  
Filter Maintenance!!  
Openings in the cabinet are provided for ventilation. To  
ensure reliable operation of the product and to protect  
it from overheating, these openings must not be  
blocked or covered.  
The projector uses a lamp which generates  
significant heat. The cooling fans and air vents are  
provided to dissipate the heat by drawing air into the  
housing and the filter is located in the intake vents to  
prevent dust from getting inside of the projector.  
CAUTION  
In order to care for the projector appropriately,  
regular cleaning is required. Remove any dirt or dust  
that has accumulated on the projector.  
Hot air is exhausted from the exhaust vent. When  
using or installing the projector, the following  
precautions should be taken.  
If the projector reaches a time set in the timer  
setting, a Filter replacement icon (Fig. 1) appears on  
the screen and WARNING FILTER indicator on the  
top panel lights up (see below), indicating that the  
filter replacement is necessary.  
–Do not put any flammable object or spray can near  
the projector, hot air is exhausted from the air vents.  
–Keep the exhaust vent at least 3’ (1 m) away from  
any objects.  
–Do not touch peripheral parts of the exhaust vent,  
especially screws and metallic parts. These areas will  
become hot while the projector is being used.  
–Do not put anything on the cabinet. Objects put on  
the cabinet will not only get damaged but also may  
cause fire hazard by heat.  
–Do not cover vents with papers or other materials.  
–Make sure that there are no objects under the  
projector. An object under the projector may prevent  
the projector from taking cooling air through bottom  
vent.  
If the projector detects that the filter is clogged and  
no scroll is left in the filter cartridge, a Filter cartridge  
replacement icon (Fig. 2) appears on the screen and  
WARNING FILTER indicator on the top panel lights  
up (see below). Stop using the projector immediately  
and replace the filter cartridge.  
Blocking the air vents and leaving the projector  
uncleaned for a long time may not only damage the  
projector and may require costly repairs but may also  
cause accidents or fire.  
Cooling fans are provided to cool down the projector.  
The fans’ running speed is changed according to the  
temperature inside the projector.  
For maintenance of the filter, refer to “Filter counter”  
on page 56 and “Maintenance and Care” on pages  
57–59.  
Damages to the projector caused by using an  
uncleaned filter or improper maintenance will  
void the warranty on the projector.  
Top Panel  
Fig.1 Filter replacement icon  
AIR INTAKE VENT  
EXHAUST VENT  
Fig.2 Filter cartridge replacement  
icon  
WARNING FILTER  
indicator  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Installing the Projector in Proper Directions  
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in  
severe accident or fire hazard.  
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the  
horizontal plane.  
ꢀNote:  
s4O INVERSE OR REVERSE THE IMAGEꢂ SET THE CEILING FUNCTION TO h/Nꢁv ꢃPPꢁ ꢄꢅꢂ ꢄꢄ  
s4HE PROJECTOR CAN NOT BE OPERATED AT AN ALTITUDE ABOVE ꢆꢂꢅꢅꢅ METERSꢁ  
Positioning Precautions  
Avoid positioning the projector as described below when installing.  
10˚  
10˚  
10˚  
10˚  
Do not roll the projector more  
than 10 degrees from side to  
side.  
In upward projection, do  
not tilt the projector over 10  
degrees right and left.  
Do not put the projector  
on either side to project an  
image.  
In downward projection, do  
not tilt the projector over 10  
degrees right and left.  
10˚  
10˚  
CAUTION ON CEILING MOUNTING  
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted  
properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty  
on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit  
or installation of the ceiling mount kit in an improper location.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Moving the Projector  
Retract the adjustable feet to prevent damage  
to lens and cabinet. For safety, holding the  
projector on both sides by 2 or more people is  
recommended to move the projector because  
the projector is heavy. When moving the  
projector by one person from necessity, hold  
the handle carefully. Do not hold the lens  
mount cover. Moving it improperly may result  
in damage of cabinet or person's injury.  
CAUTION IN CARRYING OR  
TRANSPORTINGTHE PROJECTOR  
–Do not drop or bump the projector, otherwise  
damages or malfunctions may result.  
–When carrying the projector, use a suitable carrying  
case.  
–Do not transport the projector by courier or any  
other transport service in an unsuitable transport  
case. This may cause damage to the projector. For  
information about transporting the projector by  
courier or any other transport service, consult your  
dealer.  
–Do not put the projector in a case before it is  
cooled enough.  
–Do not transport the projector with a replacement  
lens installed.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compliance  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits for a Class A digital device,  
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against  
harmful interference when the equipment is operated in a commercial environment. This equipment  
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance  
with the instruction manual, may cause harmful interference to radio communications. Operation of  
this equipment in a residential area is likely to cause harmful interference in which case the user will be  
required to correct the interference at his own expense.  
Do not make any changes or modifications to the equipment unless otherwise specified in the  
instructions. If such changes or modifications should be made, you could be required to stop operation  
of the equipment.  
Canadian Radio Interference Regulations  
This Class A digital apparatus meets all requirements of the Canadian ICES-003.  
WARNING  
This is a Class A product. In a domestic environment this product may cause radio interference in  
which case the user may be required to take adequate measures.  
AC Power Cord Requirement  
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
AC Power Cord for the United States and Canada:  
AC Power Cord used in the United States and Canada is listed by the Underwriters  
Laboratories (UL) and certified by the Canadian Standard Association (CSA).  
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure  
that the plug will fit into the power outlet. Do not try to defeat this safety feature.  
Should you be unable to insert the plug into the outlet, contact your electrician.  
GROUND  
THE SOCKET-OUTLET SHOULD BE INSTALLED NEARTHE EQUIPMENT AND EASILY ACCESSIBLE.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names and Functions  
Front  
B
DꢀLens Mount Cover  
JꢀProjection Lens (Option)  
8 Indicators  
D
EꢀInfrared Remote Receiver (Front)  
G Adjustable Feet  
LꢀTerminals and Connectors  
H Handle  
< Side Control  
B Lamp Cover  
J
H
<
G
L
G
E
8
ꢁ Infrared Remote Receiver (Rear)  
ꢁꢀExhaustVent  
CAUTION  
Back  
Hot air is exhausted from the exhaust  
vent. Do not put heat-sensitive objects  
near this side.  
ꢁ
ꢁ ꢁ ꢁ  
ꢁꢀMain On/Off Switch  
ꢁ Power Cord Connector  
ꢁ Air IntakeVent  
=
ꢁ
ꢁ Air Filter Cover  
ꢁ
ꢁ
G
G
=Kensington Security Slot  
This slot is for a Kensington lock used  
to deter theft of the projector.  
*Kensington is a registered trademark of ACCO Brands  
Corporation.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names and Functions  
Terminals and Connectors  
D
J
8
E
H
<
G
L
=
Gꢀ  
L
DVI INPUT TERMINAL  
Connect computer output (Digital/DVI-D type) to  
this terminal. (p.20)  
HD (HDCP Compatible) signal can be also  
connected. (p.21)  
Dꢀ  
SERIAL PORT INTERMINAL  
If you control the projector by computer, you must  
connect a cable (not supplied) from your computer  
to this terminal.  
Jꢀ  
SERIAL PORT OUT TERMINAL  
D-sub 15-PIN INPUT TERMINAL  
This terminal outputs signal from SERIAL PORT IN.  
More than two projectors can be controlled with  
one computer by connecting SERIAL PORT IN of  
another projector to this terminal.  
Connect computer output (Analog D-sub 15-pin  
type) to this terminal. (pp.20-21)  
Hꢀ5 BNC INPUT JACKS  
Connect the component or composite video  
output signal from video equipment to VIDEO/Y,  
Pb/Cb, and Pr/Cr jacks or connect the computer  
output signal (5 BNCType [Green, Blue, Red,  
Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V  
jacks. (pp.20–21)  
8ꢀUSB CONNECTOR (Series B)  
USB connector is to used to service the projector.  
EꢀR/C JACK  
When using the wired remote control, connect the  
wired remote control to this jack with a remote  
control cable (not supplied).  
<ꢀS-VIDEO INPUT JACK  
Connect the S-VIDEO output signal from video  
equipment to this jack (p.21).  
; RESET button  
! BUILTꢀIN MICRO PROCESSOR WHICH CONTROLS THIS UNIT MAY  
OCCASIONALLY MALFUNCTION AND NEED TO BE RESETꢁ 4HIS CAN BE DONE  
BY PRESSING THE 2%3%4 BUTTON WITH A PENꢂ WHICH WILL SHUT DOWN  
AND RESTART THE UNITꢁ $O NOT USE THE 2%3%4 FUNCTION EXCESSIVELYꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names and Functions  
Side Control and Indicators  
INDICATORS  
SIDE CONTROLS  
Side Control  
D
H
J
8
<
B
ꢁ
E
G
L
ꢁ
Dꢀ  
button  
ON/STAND-BY  
Hꢀ  
<ꢀ  
button  
LENS SHIFT  
Select the LENS SHIFT function. (p.27)  
Turn the projector on or off. (pp.23,24)  
JꢀZOOM button  
button  
FOCUS  
Adjust the focus. (p.27)  
Zoom in and out the images. (p.27)  
8ꢀ  
button  
MENU  
Open or close the On-Screen MENU. (pp.25, 26)  
button  
B INPUT  
Select an input source INPUT 1, INPUT 2, Input 3  
or Input 4. (pp.31-33)  
Eꢀ  
buttons  
POINT  
- Select an item or adjust the value in the On-  
Screen MENU. (p.25)  
- Pan the image in DIGITAL ZOOM + mode. (p.40)  
ꢁꢀ  
SELECT  
button  
Used to execute the selected item. (p.25) It is also  
used to expand image in DIGITAL ZOOM mode.  
(p.40)  
Gꢀ  
SHUTTER button  
Close and open up the built-in shutter. (p.27)  
ꢁ INFORMATION button  
Display the input source information (p.28).  
Lꢀ  
button  
AUTO PC ADJ.  
Automatically adjust the computer image to its  
optimum setting. (pp.27, 35)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names and Functions  
Indicators  
Dꢀ  
LAMP Indicator  
This indicator is dim when the projector is turned  
on. And bright when the projector is in stand-by  
mode. (pp.72-74)  
D
J
8
Jꢀ  
READY indicator  
This indicator lights green when the projector is  
ready to be turned on. And it flashes green in  
Power Management mode. (pp.52, 72-74)  
E
8ꢀ  
WARNINGTEMP. indicator  
G
L
This indicator flashes red when internal projector  
temperature is too high. (pp.65, 72-74)  
Eꢀ  
WARNING FILTER indicator  
H
–Blink slow when the filter is being scrolled (pp.  
57, 72).  
–Blink fast when the filter scroll is not working  
properly or the filter cartridge is not installed  
(pp.57, 74).  
–Light orange when the clogging of the filter is  
detected or the filter counter reaches a time set  
in the timer setting, urging immediate filter/ filter  
cartridge replacement (pp.56, 57, 74).  
Gꢀ  
SHUTTER indicator  
Light blue when the shutter is closed. (p72)  
Lꢀ  
LAMP 2 REPLACE indicator  
Turn orange when the life of the projection lamp2  
draws to an end. (pp.61, 73)  
H
LAMP 1 REPLACE indicator  
Turn orange when the life of the projection lamp1  
draws to an end. (pp.61, 73)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Configurations ofTerminals  
ANALOG (Mini D-sub 15 pin)  
Red Input  
Green Input  
Blue Input  
+5V Power  
Ground (Vert. sync.)  
Ground  
DDC Data  
Horiz. sync.  
Vert. sync.  
1
9
2
5
1
4
3
2
3
4
5
6
7
8
10  
11  
12  
13  
14  
15  
10  
9
8
7
6
15  
12  
11  
14  
13  
No Connect  
Ground (Horiz.sync.)  
Ground (Red)  
Ground (Green)  
Ground (Blue)  
DDC Clock  
DIGITAL DVI-D (DVI 24 PIN)  
T.M.D.S. Data2–  
T.M.D.S. Data2+  
T.M.D.S. Data2 Shield  
No Connect  
No Connect  
DDC Clock  
T.M.D.S. Data1–  
T.M.D.S. Data1+  
T.M.D.S. Data1 Shield  
No Connect  
No Connect  
+5V Power  
T.M.D.S. Data0–  
1
2
3
4
5
6
7
8
9
17  
18  
19  
20  
21  
22  
23  
24  
T.M.D.S. Data0+  
T.M.D.S. Data0 Shield  
No Connect  
10  
11  
12  
13  
14  
15  
16  
1
9
2
3
4
5
6
7
8
10 11 12 13 14 15 16  
17 18 19 20 21 22 23 24  
No Connect  
T.M.D.S. Clock Shield  
T.M.D.S. Clock+  
T.M.D.S. Clock–  
DDC Data  
No Connect  
Ground (for +5V)  
Hot Plug Detect  
USB CONNECTOR (Series B)  
1
2
3
4
Vcc  
- Data  
+ Data  
Ground  
2
3
1
4
CONTROL PORT CONNECTOR (D-sub 9 pin)  
Serial  
1
2
3
4
5
6
7
8
9
-----  
R X D  
T X D  
-----  
SG  
-----  
RTS  
CTS  
-----  
LX1000 User Manual  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
020-000141-01 Rev. 1 (05-2009)  
Part Names and Functions  
Remote Control Battery Installation  
Open the battery  
compartment lid.  
Install new batteries into  
the compartment.  
Replace the  
compartment lid.  
1
2
3
Two AA size batteries  
For correct polarity (+ and –),  
be sure battery terminals are  
in contact with pins in the  
compartment.  
Pull up the lid  
and remove it.  
To ensure safe operation, please observe the following precautions :  
L Use two (2) AA or LR6 type alkaline batteries.  
L Always replace batteries in sets.  
L Do not use a new battery with a used battery.  
L Avoid contact with water or liquid.  
L Do not expose the remote control to moisture or heat.  
L Do not drop the remote control.  
L If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.  
L Risk of an explosion if battery is replaced by an incorrect type.  
L Dispose of used batteries according to the instructions.  
Remote Control Receivers and Operating Range  
Point the remote control toward the projector (to  
Infrared Remote Receivers) when pressing the buttons.  
Maximum operating range for the remote control is  
about 16.4’ (5 m) and 60 degrees in front and rear of the  
projector.  
16.4’  
(5 m)  
Infrared Remote Receivers are provided both in front and  
back of the projector. You can conveniently use both of  
the receivers.(pp. 10, 52)  
ꢀNote:  
s
7HEN HANGING THE PROJECTOR FROM THE CEILINGꢂ SELECT THE  
)NFRARED 2EMOTE 2ECEIVER WHICH IS LOCATED FARTHER AWAY  
FROM THE FLUORESCENT LIGHTꢁꢃPꢁꢇꢈ  
16.4’  
(5 m)  
Wired Remote Control  
The remote control can be used as a wired remote control. Wired remote control helps you use the remote control outside  
of the operating range (16.4’/ 5 m). Connect the remote control and the projector with the remote control cable (sold  
separately). Connected with the remote control cable, the remote control does not emit wireless signal.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names and Functions  
Remote Control Code  
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote  
control codes prevents interference from other remote controls when several projectors or video equipment  
next to each other are operated at the same time. Change the remote control code for the projector first before  
changing that for the remote control. See “Remote control” in the Setting Menu on page 52.  
Use position  
Reset position  
Check the Reset Switch to "Use position" in the  
compartment lid on the back of the remote control.  
1
2
While holding down the MENU button, press  
and release the IMAGE ADJ. button the number  
of corresponding times you would like to set the  
number of the remote control code for the projector.  
Reset switch  
Number ofTimes  
Remote Control Code Pressing IMAGE ADJ.  
button  
Code 1  
Code 2  
Code 3  
Code 4  
Code 5  
Code 6  
Code 7  
Code 8  
1
2
3
4
5
6
7
8
MENU button  
IMAGE ADJ.  
button  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Lens Installation  
Before setting up the projector, install Projection Lens on the projector.  
Before installation, check where the projector is used and prepare a suitable lens. For the specifications of  
Projection Lens, contact sales dealer where you purchased the projector.  
- Do not use the optional lens below for this projector. Otherwise damages may result.  
LENS MODEL NO. : 38-809041-02  
- Lens installation and replacement should be made by the qualified service personnel.  
- When setting the projector after lens installation, be sure to replace a Lens Cap to protect a  
surface.  
- When carrying or holding up the projector, be careful not to put your hands on lens part. It may  
damage lens, cabinet, or mechanical parts.  
Positioning Projector  
This projector is designed to project on a flat projection  
surface.  
SCREEN  
ꢀNote:  
s
"RIGHTNESS IN ROOM HAS A GREAT INFLUENCE ON PICTURE QUALITYꢁ  
)T IS RECOMMENDED TO LIMIT AMBIENT LIGHTING IN ORDER TO  
PROVIDE THE BEST IMAGEꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Lens Shift Adjustment  
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This  
function makes the positioning of images easy on the screen.(See page 27)  
The display position can be  
shifted upward up to 50%  
elevation of the display.  
The display position can be  
shifted downward up to 50%  
low level of the display.  
When the lens is shifted to bottom.  
When the lens is shifted to top.  
The display position can be  
shifted to the left in up to  
10% width of the display.  
The display position can be  
shifted to the right in up to  
10% width of the display.  
When the lens is shifted to rightmost.  
When the lens is shifted to leftmost.  
Picture Level and Pitch Adjustment  
The projection angle is adjustable up to 2.8 degrees  
upward and downward respectively by rotating front and  
back feet .  
REAR ADJUSTABLE  
FEET (Refer to p.10)  
To raise the projector, rotate the feet clockwise.  
To lower the projector or to retract the adjustable feet,  
rotate the feet counterclockwise.  
To correct keystone distortion, press the KEYSTONE  
button on the remote control or select Keystone from the  
menu (see pages 14, 30, 40, 44).  
Do not rotate the adjustable feet when you  
see the red line on the adjustable feet. The  
adjustable feet may fall off.  
ADJUSTABLE  
FEET  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Terminals of Projector  
The projector has two replaceable Interface board slots. The projector's functions can be extended by installing  
the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your  
purchasing the projector. For the Optional Interface Boards, contact sales dealer where you purchased the  
projector.  
2TERMINAL SLOTS (Factory set)  
INPUT/OUTPUT  
TERMINALS  
DVI / D-sub 15Terminal  
5-BNC / VideoTerminal  
Replacement ofTerminal  
ꢀNote:  
s )N THE REPLACEMENT OF INTERFACE BOARDꢂ TURN OFF THE  
PROJECTORꢂ PRESS THE -AIN /Nꢉ/FF 3WITCH TO /FF AND  
UNPLUG THE !# POWER CORD FROM THE !# OUTLETꢁ  
Remove 2 Screws from an interface board.  
1
Pull out the interface board.  
2
Replace the interface board. Insert a new interface  
board along Guide to fit Plug into Socket.  
3
Screws  
Socket  
Tighten screws to secure the interface board.  
4
Guide  
NOTES ON ORDERING OR USING  
OPTIONAL INTERFACE BOARD  
When ordering or using Optional Interface Board, contact  
your sales dealer. When contacting the sales dealer, tell  
the Option Control Number (Op.cont.No.) in the menu that  
is located on the bottom of the information menu.  
(See page 28)  
Figure shows Dual-SDI terminal.  
Plug  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Connecting to Computer  
Cables used for connection  
s 6'! #ABLE ꢀ$ꢁSUB ꢂꢃ PIN) *  
s DVI Cable  
s BNC Cable (BNC x 5)  
( *One cable is supplied; Other cables are not supplied with this projector.)  
Laptop type  
Desktop type  
Monitor Output  
Monitor Output  
Monitor Output  
DVI Cable  
VGA Cable  
BNC Cable  
R
B
G
H/HV  
V
ANALOG  
DIGITAL  
Terminals of  
the projector  
5NPLUG THE POWER CORDS OF BOTH THE  
PROJECTOR AND EXTERNAL EQUIPMENT FROM  
THE !# OUTLET BEFORE CONNECTING CABLESꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Connecting toVideo Equipment  
Cables used for connection  
s Video Cable (BNC x 3, BNC x 1)  
s SCART-VGA Cable  
s DVI Cable  
s S-Video Cable  
( Cables are not supplied with the projector.)  
Component video output equipment.  
(such as DVD player or  
high-definitionTV source.)  
Video Source (example)  
Video Disc Player  
Video Cassette Recorder  
Component Video Output  
Composite  
Video Output  
Digital Output  
(HDCP compatible)  
RGB SCART  
21-pin Output  
S-Video Output  
Y
Pb/Cb Pr/Cr  
SCART-VGA  
Cable  
BNC  
Cable  
S-Video Cable  
BNC  
Cable  
DVI Cable  
S-VIDEO  
Y-Pb/Cb-Pr/Cr  
DIGITAL  
ANALOG  
VIDEO  
Terminals of  
the projector  
5NPLUG THE POWER CORDS OF BOTH THE  
PROJECTOR AND EXTERNAL EQUIPMENT FROM  
THE !# OUTLET BEFORE CONNECTING CABLESꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Connecting the AC Power Cord  
This projector uses nominal input voltages of 100-120 or 200–240  
V AC. It is designed to work with single-phase power systems  
having a grounded neutral conductor. To reduce the risk of  
electrical shock, do not plug into any other type of power system.  
If you are not sure of the type of power being supplied, consult  
your authorized dealer or service station.  
Connect the projector with all peripheral equipment before turning  
on the projector.  
CAUTION  
The AC outlet must be near this equipment and must be easily  
accessible.  
ꢀNote:  
Connect the AC power cord (supplied) to the  
projector.  
s5NPLUG THE !# POWER CORD OR TURN OFF THE -!). /.ꢉ/&&  
3WITCH WHEN THE PROJECTOR IS NOT IN USEꢁ 7HEN THE PROJECTOR  
IS IN STANDꢀBY MODEꢂ IT CONSUMES A LITTLE ELECTRIC POWERꢁ  
NOTE ON THE POWER CORD  
AC power cord must meet the requirements of the country where you use the projector.  
Confirm the AC plug type with the chart below and proper AC power cord must be used.  
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.  
Projector side  
AC Outlet side  
For the U.S.A. and Canada  
For Continental Europe  
Ground  
To POWER CORD  
CONNECTOR on your  
projector.  
To the AC Outlet.  
(120V AC)  
To the AC Outlet.  
(200–240V AC)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Turning On the Projector  
Complete peripheral connections (with a computer,  
VCR, etc.) before turning on the projector.  
16  
1
Connect the projector’s AC power cord into an AC  
2
outlet and turn on the MAIN ON/OFF Switch. The  
LAMP indicator lights red and the READY indicator  
lights green.  
The preparation display will disappear after 20  
seconds.  
Press the ON/STAND-BY button on the side control  
or on the remote control. The LAMP indicator  
3
dims red and the cooling fans start to operate. The  
preparation display appears on the screen and the  
countdown starts.  
Selected Input Source and Lamp control  
After the countdown, the input source that was  
Lamp mode  
4
selected the last time and the Lamp mode icon (see  
page 60) appear on the screen.  
See page 60 for the Lamp mode status  
If the projector is locked with a PIN code, PIN code  
Input Dialog Box will appear. Enter the PIN code as  
instructed below.  
ꢀNote:  
s4HE ,AMP REPLACEMENT ICON AND THE &ILTER WARNING  
ICON MAY APPEAR ON THE SCREEN DEPENDING ON THE  
USAGE STATE OF THE PROJECTORꢁ  
Enter a PIN code  
Use the Point !  buttons on the side control or on the  
remote control to enter a number. Press the Point  
button to fix the number and move the red frame pointer  
to the next box. The number changes to “3.” Repeat  
this step to complete entering a four-digit number. After  
entering the four-digit number, move the pointer to “Set.”  
Press the SELECT button so that you can start to operate  
the projector.  
PIN code Input Dialog Box  
After the OK icon  
disappears, you can  
operate the projector.  
If you fixed an incorrect number, use the Point ꢀ button  
to move the pointer to the number you want to correct,  
and then enter the correct number.  
ꢀNote:  
s7HEN THE ,OGO SELECT FUNCTION IS SET TO h/FFꢂv THE  
LOGO WILL NOT BE SHOWN ON THE SCREEN ꢃPꢁꢄꢊ ꢁ  
s7HEN THE h#OUNTDOWN OFFv OR h/FFv IS SELECTED  
IN THE $ISPLAY FUNCTIONꢂ THE COUNTDOWN WILL NOT BE  
SHOWN ON THE SCREEN ꢃPꢁꢄꢋ ꢁ  
If you entered an incorrect PIN code, “PIN code” and the  
number (3333) will turn red for a moment. Enter the  
correct PIN code all over again.  
s$URING THE COUNTDOWN PERIODꢂ ALL OPERATIONS ARE  
INVALIDꢁ  
What is PIN code?  
s)F THE 0). CODE NUMBER IS NOT ENTERED WITHIN THREE  
MINUTES AFTER THE 0). CODE DIALOG BOX APPEAREDꢂ  
THE PROJECTOR WILL BE TURNED OFF AUTOMATICALLYꢁ  
s4HE hꢌꢈꢆꢄv IS SET AS THE INITIAL 0). CODE AT THE  
FACTORYꢁ  
PIN (Personal Identification Number) code is a security  
code that allows the person who knows it to operate the  
projector. Setting a PIN code prevents unauthorized use  
of the projector.  
A PIN code consists of a four-digit number. Refer to the  
PIN code lock function in the Setting Menu on page 53-  
54 for locking operation of the projector with your PIN  
code.  
CAUTION ON HANDLING PIN CODE  
If you forget your PIN code, the projector  
can no longer be started. Take special care  
in setting a new PIN code; write down the  
number in a column on page 80 of this  
manual and keep it on hand. Should the  
PIN code be missing or forgotten, consult  
your dealer or service center.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Turning Off the Projector  
Press the ON/STAND-BY button on the side control  
1
or on the remote control, and “Power off?” appears  
on the screen.  
Press the ON/STAND-BY button on the side control  
2
or on the remote control again to turn off the  
projector. The LAMP indicator lights bright and the  
READY indicator turns off. After the projector is  
turned off, the cooling fans operate. You cannot turn  
on the projector during this cooling down period.  
“Power off?” disappears after 4 seconds.  
When the projector has cooled down enough, the  
3
READY indicator lights green and then you can turn  
on the projector. To turn off the MAIN ON/OFF  
Switch, wait until the projector is completely cooled  
down.  
Unplug the AC power cord from the AC outlet.  
4
TO MAINTAINTHE LIFE OFTHE LAMP, ONCEYOU  
TURNTHE PROJECTOR ON, WAIT AT LEAST FIVE  
MINUTES BEFORETURNING IT OFF.  
DO NOT UNPLUGTHE AC POWER CORD WHILE  
COOLING FANS ARE RUNNING OR BEFORETHE  
READY INDICATOR LIGHTS GREEN AGAIN.  
OTHERWISE IT WILL RESULT IN SHORTENING OF  
THE LAMP LIFE.  
DO NOT OPERATETHE PROJECTOR CONTINUOUSLY  
WITHOUT REST. CONTINUOUS USE MAY RESULT IN  
SHORTENINGTHE LAMP LIFE.  
ꢀNote:  
s7HEN THE /N START FUNCTION IS SET TO h/Nꢂv THE PROJECTOR  
WILL BE TURNED ON AUTOMATICALLY BY CONNECTING THE !# POWER  
CORD TO AN !# OUTLET ꢃPꢁꢇꢆ ꢁ  
s4HE RUNNING SPEED OF COOLING FANS IS CHANGED ACCORDING TO  
THE TEMPERATURE INSIDE THE PROJECTORꢁ  
s$O NOT PUT THE PROJECTOR IN A CASE BEFORE THE PROJECTOR IS  
COOLED ENOUGHꢁ  
s)F THE 7!2.).' 4%-0ꢁ INDICATOR BLINKS REDꢂ SEE h7ARNING  
)NDICATORSv ON PAGE ꢍꢇꢁ  
s4HE PROJECTOR CANNOT BE TURNED ON DURING THE COOLING  
PERIOD WITH THE 2%!$9 INDICATOR TURNED OFFꢁ 9OU CAN TURN IT  
ON AGAIN AFTER THE 2%!$9 INDICATOR BECOMES GREEN AGAINꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
How to Operate the On-Screen Menu  
Side Control  
The projector can be adjusted or set via the On-Screen  
Menu. For each adjustment and setting procedure, refer  
to the respective sections in this manual.  
MENU button  
Press the MENU button on the side control or the  
remote control to display the On-Screen Menu.  
1
POINT buttons  
SELECT button  
Use the Point ꢀ buttons to select a Menu icon.  
Use the Point !  buttons to select an item in the  
selected menu.  
2
Press the SELECT button to show the item data.  
Use the Point ꢀ buttons to adjust the values.  
3
Remote Control  
MENU button  
To close the On-Screen Menu, press the MENU  
button again.  
ꢀNote:  
POINT buttons  
SELECT button  
s4HE SELECTED ITEM IS NOT ACTIVE UNTIL THE 3%,%#4 BUTTON IS  
PRESSEDꢁ  
On-Screen Menu  
Menu icon  
Menu bar  
Pointer (red frame )  
Pointer  
(red frame )  
Press the Point !  buttons  
to move the pointer.  
Item  
SELECT  
button  
Press the SELECT button here  
to display previous items.  
Item data  
Press the Point ꢀ  
buttons to adjust the  
value.  
Press the SELECT button here  
to display next items.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Menu Bar  
For detailed functions of each menu, see “MenuTree” on pages 69-71.  
For Computer Source  
D
J
8
E
G
L
H
<
B
LꢀImage Adjust Menu  
DꢀGuideWindow  
Used to adjust the computer image. [Contrast/ Brightness/  
Color management/Auto picture control/Color temp./White  
balance (R/G/B)/Offset (R/G/B)/Sharpness/ Gamma/Reset/  
Store] (pp. 45-47).  
Show the selected Menu of the On-Screen Menu.  
JꢀInput Menu  
Used to select an input source Computer or Video (pp. 31-  
33).  
HꢀScreen Menu  
Used to adjust the size of the image. [Normal/True/Wide/  
Full screen/Custom/Keystone/Ceiling/Rear/Reset/Digital  
zoom +/–] (pp.39-40).  
8ꢀPC System Menu  
Used to select computer system (p. 34).  
<ꢀSetting Menu  
EꢀPC Adjust Menu  
Used to set the projector’s operating configurations  
(pp. 48-56).  
Used to adjust the parameters to match with the input signal  
format (pp. 35-37).  
BꢀInformation Menu  
GꢀImage Select Menu  
Used to select an image level among Standard, Real, and  
Image 1–10(p. 38).  
Display the input source information(p. 28).  
For Video Source  
E
G
L
H
<
J
8
D
GꢀImage Adjust Menu  
DꢀGuideWindow  
Used to adjust the picture image. [Contrast/Brightness/  
Color/Tint/Color management/ Auto picture control/Color  
temp./White balance (R/G/B)/ Offset (R/G/B)/Sharpness/  
Gamma/Noise reduction/Progressive/Reset/Store]  
(pp. 45-47)  
Show the selected Menu of the On-Screen Menu.  
JꢀInput Menu  
Used to select an input source Computer or Video (pp. 31-  
33).  
LꢀScreen Menu  
Used to adjust the size of the image. [Normal/Wide/  
Custom/Keystone/Ceiling/Rear/Reset] (pp. 43-44).  
8ꢀAV System Menu  
Used to select the system of selected video source (p. 41).  
HꢀSetting Menu  
Used to set the projector’s operating configurations  
(pp. 48-56).  
EꢀImage Select Menu  
Used to select an image level among Standard, Cinema, and  
Image 1–10 (p. 42).  
<ꢀInformation Menu  
Display the input source information(p. 28).  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Operating with Projector Control  
Zoom Adjustment  
Side Control  
Display “Zoom” on the screen. Press the ZOOM button  
and then press the point !  buttons to zoom in and out  
the image.  
ZOOM button  
FOCUS button  
Focus Adjustment  
Display “Focus” on the screen. Press the FOCUS button  
and then press the point !  buttons to adjust the focus  
of the image.  
LENS SHIFT  
button  
Lens Shift Adjustment  
POINT buttons  
Display “Lens shift” on the screen. Use the Point ! ꢀ  
buttons to position the screen to the desired point without  
having picture distortion.  
The screen can be moved up or down to 50 percent, or  
sideways up to 10 percent from the central axis of the lens  
shift.  
INFORMATION.  
button  
SHUTTER  
button  
AUTO PC ADJ.  
button  
Auto PC Adjustment  
Zoom  
Focus  
Operate the Auto PC Adj. function. The computer screen  
adjustment can be done easily by pressing this button.  
See page 35 for details.  
ꢀNote:  
s4HE ARROW DISAPPEARS AT THE MAXIMUM LENS SHIFT IN EACH  
DIRECTIONꢁ  
s4HE ARROW TURNS RED WHEN THE LENS SHIFT COMES TO THE  
CENTER POSITION OF THE SCREENꢁ  
Shutter Function  
Shutter function allows you to completely block out light  
to the screen. Press the SHUTTER button to close the  
shutter inside the projector. To open up the shutter, press  
the SHUTTER button again. Refer to p.55 for detail of  
setting for the Shutter function.  
ꢀNote:  
s 4HE 3(544%2 BUTTON ON THE SIDE CONTROL AND THE REMOTE  
CONTROL CANNOT BE EFFECTIVE WHEN 3HUTTER 0ROTECTION IS ꢎ/Nꢎ  
IN THE 3ETTING MENUꢁ ꢃPꢁꢇꢇ  
s 4HE 3(544%2 INDICATOR ON THE PROJECTORgS TOP LIGHTS BLUE  
WHEN THE SHUTTER IS CLOSEDꢁ ꢃPPꢁꢌꢆꢂ ꢏꢈ  
s 4HE PROJECTOR WILL SHUT DOWN AUTOMATICALLY WHEN THE SET  
TIME ON 3HUTTER MANAGEMENT HAS PASSEDꢁ ꢃPꢇꢇ  
s 4HE 0OWER MANAGEMENT FUNCTION DOES NOT WORK WHEN THE  
SHUTTER IS CLOSEDꢁꢃPꢁꢇꢈ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Information  
Information Menu  
Information display can be used to confirm the current  
operating condition of the projector and the signal being  
projected through the projector.  
Information Menu  
Press the INFORMATION button to display the  
information window on the screen. To hide the  
information window, press the INFORMATION button  
again or Point ꢀ buttons.  
The information window can also be selected from the  
menu.  
*The H- and V-sync freq. values described in this figure  
may be different from the actual values.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Operating with Remote Control  
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons  
enables you to make the desired operation quickly without calling up the On-Screen Menu.  
AUTO PC button  
Press the AUTO PC button on the remote control to  
operate the Auto PC Adj. function. The computer screen  
adjustment can be done easily by pressing this button.  
See page 35 for details.  
Remote Control  
LENS SHIFT button  
AUTO PC  
button  
See page 27 for details.  
ZOOM buttons  
Press the ZOOM buttons on the remote control to zoom  
in and out the image. See page 27 for details.  
POINT ! ꢀ  
buttons  
FOCUS buttons  
SCREEN  
button  
Press the FOCUS buttons on the remote control to adjust  
focus of the image. See page 27 for details.  
LENS SHIFT  
button  
FREEZE button  
ZOOM  
buttons  
FOCUS  
buttons  
Press the FREEZE button on the remote control to freeze  
the picture on the screen. To cancel the FREEZE function,  
press the FREEZE button again or press any other button.  
FREEZE  
button  
D.ZOOM  
button  
SCREEN button  
Press the SCREEN button on the remote control to select  
the desired screen size. The selected screen size mode  
appears on the screen for 4 seconds. See pages 39 to 40  
and 43 to 44 for details.  
INFO.  
button  
Press and hold the SCREEN button for more than 5  
seconds to return all the screen size adjustment setting  
to the factory default setting.  
ꢀNote:  
s3EE THE NEXT PAGE FOR THE DESCRIPTION OF OTHER  
BUTTONSꢁ  
D.ZOOM button  
Press the D.ZOOM button on the remote control to enter  
to the Digital zoom +/– mode. See page 40 for details.  
INFO. button  
Press the INFO. button on the remote control to display  
the information window on the screen.  
See the previous page for details.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Remote Control  
SHUTTER button  
See page 27 for details.  
SHUTTER  
button  
FILTER button  
Press and hold the FILTER button for more than five  
seconds to replace the filter mechanically. See page 51  
for details.  
ꢀNote:  
IMAGE ADJ.  
button  
s4HE FILTER CANNOT BE REWOUNDꢁ  
s7HEN THE FILTER IS REPLACEDꢂ THE TOTAL ACCUMULATED TIME OF  
THE FILTER USE IS AUTOMATICALLY SET TO ꢅꢁ  
IMAGE ADJ. button  
Press the IMAGE ADJ. button on the remote control to  
adjust a image level of the screen.  
KEYSTONE  
button  
P-TIMER  
button  
IMAGE SEL.  
button  
For more detail, see pp.45-47.  
FILTER  
button  
IMAGE SEL. button  
ꢀNote:  
Press the IMAGE SEL. button on the remote control to  
select a desired image level of the screen.  
For more detail, see pp.38, 42.  
s3EE THE PREVIOUS PAGE FOR THE DESCRIPTION OF  
OTHER BUTTONSꢁ  
P-TIMER button  
Press the P-TIMER button on the remote control. The  
Timer display “00 : 00” appears on the screen and starts  
to count time (00 : 00–59 : 59).  
P-Timer display  
To stop the P-TIMER, press the P-TIMER button.  
To cancel the P-TIMER, press the P-TIMER button again.  
KEYSTONE button  
Press the KEYSTONE button on the remote control. The  
“Keystone” appears on the screen.  
s 4HE WHITE ARROWS INDICATE THAT THERE IS NO CORRECTIONꢄ  
s ! RED ARROW INDICATES THE DIRECTION OF CORRECTIONꢄ  
s !N ARROW DISAPPEARS AT THE MAXIMUM CORRECTIONꢄ  
s )F YOU PRESS THE +%934/.% BUTTON ON THE REMOTE  
control again while the Keystone dialog box is being  
displayed, the keystone adjustment will be canceled.  
s4HE ADJUSTABLE RANGE CAN BE LIMITED DEPENDING ON THE  
input signal.  
Use the Point ! ꢀ buttons to correct keystone  
distortion. The keystone adjustment can be stored  
(pp.40, 44).  
s h+EYSTONEv DISAPPEARS AFTER ꢂꢅ SECONDSꢄ  
Reduce the upper width with  
Point ! button.  
Reduce the lower width  
with Point   button.  
Reduce the left part with  
Point ꢀ button.  
Reduce the right part with  
Point button.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input Selection  
Input  
Side Control  
Side Control button operation  
INPUT button  
INPUT 1  
INPUT 2  
INPUT 3  
INPUT button  
INPUT 4  
Side Control Operation  
Press the INPUT button on the side control. It switches to  
INPUT 1, INPUT 2, INPUT 3 and INPUT 4 as you press the  
INPUT button.  
Before using the INPUT button on the side control, you  
must select a correct input source by On-Screen Menu  
and the latest input source will be displayed.  
Remote Control  
Remote Control button operation  
INPUT buttons  
Remote Control Operation  
Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button  
on the remote control. It switches to INPUT 1, INPUT 2,  
INPUT 3 or INPUT 4 as you press the INPUT button.  
Before using the INPUT button on the remote control, you  
must select a correct input source by On-Screen Menu  
and the latest input source will be displayed.  
ꢀNote:  
s%MPTY SLOTS CANNOT BE SELECTEDꢁ  
s7HEN A SLOT IS EMPTYꢂ THE INPUT IS DISPLAYED IN GRAYOUTꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input Selection  
Computer Input Source Selection  
Menu Operation  
When Selecting the INPUT 1 with DVI/D-sub 15 terminals  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the INPUT Menu icon.  
INPUT MENU  
1
2
Input Menu icon  
Use the Point !  buttons to move the red arrow pointer  
to the desired input and then press the SELECT button.  
Then you can switch to the desired input.  
Move the pointer (red arrow) to Input  
1 and press the SELECT button.  
Press the select button again. The Source Select Menu  
appears.  
3
4
Input 1  
Use the Point !  buttons to select the desired source  
and then press the SELECT button.  
Source Select Menu  
Move the pointer (red  
arrow) to the desired source  
and press the SELECT  
button.  
RGB (PC analog)  
When your computer is connected to the INPUT 1 (ANALOG)  
terminal, select RGB (PC analog).  
RGB (PC digital)  
When your computer is connected to INPUT 1 (DIGITAL)  
terminal, select RGB (PC digital).  
When Selecting the INPUT 2 with 5-BNC/Video/S-Video terminals  
INPUT MENU  
INPUT Menu icon  
Move the pointer (red arrow) to Input  
2 and press the SELECT button.  
RGB  
When your computer is connected to the INPUT 2 (5 BNC  
INPUT JACKS) terminal, select RGB.  
Input 2  
Source Select Menu  
Move the pointer (red  
arrow) to RGB and press the  
SELECT button.  
ꢀNote:  
s7HEN A SLOT IS EMPTYꢂ THE INPUT IS DISPLAYED IN GRAYOUTꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input Selection  
Video Input Source Selection  
Menu Operation  
When Selecting the INPUT 1 with DVI/D-sub 15 terminals  
INPUT MENU  
When connecting to video equipment, select the type of  
Video source in the Source Select Menu.  
Input Menu icon  
RGB (Scart)  
When scart video equipment is connected to the INPUT 1  
(ANALOG) terminal, select RGB (Scart).  
Move the pointer (red arrow) to Input  
1 and press the SELECT button.  
RGB (AV HDCP)  
If the HDCP-compatible signal source is connected to the  
INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).  
Input 1  
Source Select Menu  
Move the pointer (red  
arrow) to RGB (Scart) or  
RGB (AV HDCP) and press  
the SELECT button.  
When Selecting the INPUT 2 with 5-BNC/Video/S-Video terminals  
When connecting to video equipment, select the type of  
Video source in the Source Select Menu.  
INPUT MENU  
Y, Pb/Cb, Pr/Cr  
Input Menu icon  
When the video input signal is connected to theY-Pb/Cb-  
Pr/Cr jacks, selectY, Pb/Cb, Pr/Cr.  
Move the pointer (red arrow) to Input  
2 and press the SELECT button.  
Video  
When the video input signal is connected to the VIDEO  
jack, select Video.  
Input 2  
S-Video  
Source Select Menu  
When the video input signal is connected to the S-VIDEO  
jack, select S-Video.  
Move the pointer (red  
arrow) toY, Pb/Cb, Pr/Cr ,  
Video, or S-video and press  
the SELECT button.  
ꢀNote:  
s ($#0 ꢃ(IGHꢀBANDWIDTH $IGITAL #ONTENT 0ROTECTION IS A  
SYSTEM FOR PROTECTING DIGITAL ENTERTAINMENT CONTENT WHICH IS  
DELIVERED BY $6) ꢃ$IGITAL 6ISUAL )NTERFACE FROM BEING COPIEDꢁ  
4HE SPECIFICATION OF ($#0 IS DECIDED AND CONTROLLED BY  
$IGITAL #ONTENT 0ROTECTIONꢂ ,,#ꢁ 3HOULD THE SPECIFICATION BE  
CHANGEDꢂ THIS PROJECTOR MAY NOT DISPLAY THE DIGITAL CONTENT  
PROTECTED BY ($#0ꢁ  
s7HEN A SLOT IS EMPTYꢂ THE INPUT IS DISPLAYED IN GRAYOUTꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer Input  
Computer System Selection  
Automatic Multi-Scan System  
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+,  
WXGA, UXGA, or WUXGA (refer to “Compatible Computer Specifications” on pages 75-76). If a computer is  
selected as a signal source, this projector automatically detects the signal format and tunes to project a proper  
image without any additional settings. (Some computers need to be set manually.)  
One of the following messages may appear when:  
The projector cannot recognize the connected  
signal conforming to the provided PC Systems.  
The “Auto” is displayed on the PC System Menu  
icon and the Auto PC Adjustment function works to  
display proper images. If the image is not projected  
properly, a manual adjustment is required. (pp.  
36–37.)  
PC SYSTEM MENU  
Auto  
PC System Menu icon  
Selected system is displayed.  
There is no signal input from the computer. Check  
the connection between your computer and the  
projector. (See “Troubleshooting” on page 66.)  
-----  
The preset system is manually adjusted in the PC  
Adjust Menu. The adjusted data can be stored in  
the Mode 1–10. (pp. 36-37)  
Mode 1  
SVGA 1  
PC systems provided in this projector is chosen.  
The projector chooses a proper system provided in  
the projector and displays it.  
= Mode 1 and SVGA 1 are examples.  
PC SYSTEM MENU  
Selecting Computer System Manually  
PC system can also be selected manually.  
PC System Menu icon  
Selected system is displayed  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the PC System Menu icon.  
1
Systems in this dialog box can be  
selected.  
Custom Mode (1–10) set in PC Adjust  
Menu. (pp.36-37)  
Use the Point !  buttons to move the red arrow pointer  
to the desired system, and then press SELECT button.  
2
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer Input  
Auto PC Adjustment  
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical  
positions to conform to your computer.  
Remote Control  
Direct Operation  
The Auto PC adjustment function can be operated  
directly by pressing the AUTO PC button on the remote  
control or the AUTO PC ADJ. button on the side control.  
AUTO PC button  
Side Control  
AUTO PC ADJ.  
button  
Menu Operation  
Auto PC adj.  
PC ADJUST MENU  
Press the MENU button to display the On-Screen Menu.  
1
Use the Point ꢀ buttons to move the red frame pointer  
to the PC Adjust Menu icon.  
Use the Point !  buttons to move the red frame pointer  
to the AUTO PC adj. icon and then press the SELECT  
button twice.  
PC Adjust Menu icon  
2
Move the red frame pointer to the Auto PC  
adj. and press the SELECT button twice.  
“Please wait...” appears while the Auto PC  
adjustment is in process.  
To store the adjusted parameters.  
The adjusted parameters from the Auto PC Adjustment can be stored in  
the projector. Once the parameters are stored, the setting can be done  
just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC  
ADJUSTMENT on pages 36-37.  
ꢀNote:  
s&INE SYNCꢂ 4OTAL DOTSꢂ (ORIZONTAL AND 6ERTICAL POSITION OF  
CERTAIN COMPUTERS CANNOT BE FULLY ADJUSTED WITH THE !UTO  
0# !DJUSTMENT FUNCTIONꢁ 7HEN THE IMAGE IS NOT PROVIDED  
PROPERLY WITH THIS OPERATIONꢂ MANUAL ADJUSTMENTS ARE  
REQUIREDꢁ ꢃPPꢁ ꢆꢍꢀꢆꢏꢁ  
s!UTO 0# !DJUSTMENT CANNOT BE OPERATED IN $IGITAL 3IGNAL  
)NPUT ON THE $6) TERMINAL AND hꢄꢋꢅPꢂv hꢇꢏꢇPꢂv hꢄꢋꢅIꢂv hꢇꢏꢇIꢂv  
hꢏꢈꢅPꢂv hꢌꢅꢆꢇIꢂv OR hꢌꢅꢋꢅIv IS SELECTED ON THE 0# 3934%-  
-ENUꢁ  
s$EPENDING ON THE CONDITION OF SIGNALS AND THE TYPE AND  
LENGTH OF CABLESꢂ THE SIGNALS MAY NOT BE PROPERLY VIEWEDꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer Input  
Manual PC Adjustment  
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector.  
Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal  
formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It  
allows you to recall the setting for a specific computer.  
ꢀNote: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on  
PC System Menu.  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the PC Adjust Menu icon.  
1
PC ADJUST MENU  
Use the Point !  buttons to move the red frame pointer  
to the desired item and then press the SELECT button  
to display the adjustment dialog box. Use the Point ꢀ  
2
PC Adjust Menu icon  
buttons to adjust the setting value.  
Move the red frame pointer to the  
desired item and press the SELECT  
button.  
Fine sync  
Use the Point ꢀ buttons to adjust the value, eliminating a  
flicker from the image displayed (from 0 to 31).  
Status (Stored/Free) of the  
Selected Mode.  
Total dots  
Use the Point ꢀ buttons to adjust the number of total dots in  
one horizontal period to match your PC image.  
Position H  
Selected Mode  
Use the Point ꢀ  
position.  
buttons to adjust the horizontal picture  
Press the Point ꢀ buttons to adjust  
the value.  
Press the SELECT button at this icon  
to adjust “Clamp,” “Display area H,” or  
“Display area V.”  
PositionV  
Use the Point ꢀ buttons to adjust the vertical picture position.  
Current mode  
Press the SELECT button to show H-sync freq. and V-sync freq.  
of the connected computer.  
Current mode  
Clamp  
Use the Point ꢀ buttons to adjust the clamp level. When the  
image has dark bars, try this adjustment.  
Display area H  
Press the SELECT  
button at Current  
mode icon to show  
the information of the  
connected computer.  
Use the Point ꢀ buttons to adjust the horizontal area displayed  
by this projector.  
Press the SELECT button at this icon  
to display the previous items.  
Display areaV  
Use the Point ꢀ buttons to adjust the vertical area displayed  
by this projector.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer Input  
Reset  
To reset the adjusted data, select Reset and press the SELECT  
button. A confirmation box appears and then select [Yes]. All  
adjustments will return to their previous figures.  
To clear the adjusted data.  
Mode free  
To clear the adjusted data, select Mode free and then press the  
SELECT button. Move the red arrow pointer to the Mode that  
you want to clear and then press the SELECT button.  
Store  
To store the adjusted data, select Store and then press the  
SELECT button. Move the red arrow pointer to one of the Mode  
1 to 10 in which you want to store, and then press the SELECT  
button.  
Close this dialog box.  
Confirmation box appears  
and then select [Yes].  
Quit  
Exit the PC Adjust Menu.  
To store the adjusted data.  
This Mode has stored parameters.  
Close this dialog box.  
Vacant  
Values of “Total dots,” “Position  
H,” “Position V,” “Display area  
H,” and “Display area V.”  
Confirmation box appears  
and then select [Yes].  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer Input  
Image Level Selection  
Direct Operation  
Press the IMAGE SEL. button on the remote control to  
select the desired image level.  
Remote Control  
Standard  
Real  
IMAGE SEL.  
button  
Image1  
s
s
s
Image 10  
Menu Operation  
IMAGE SELECT MENU  
Press the MENU button to display the On-Screen Menu.  
1
Use the Point ꢀ buttons to move the red frame pointer  
to the Image Select Menu icon.  
Image Select Menu icon  
Use the Point !  buttons to move the red frame pointer  
2
to the desired image level and then press the SELECT  
button.  
Move the red frame pointer to the desired  
level and press the SELECT button.  
Standard  
Normal picture level preset on the projector.  
Real  
Picture level with improved halftone for graphics.  
IMAGE 1–10  
User preset picture adjustment in the Image Adjust Menu.  
(p. 47)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer Input  
Screen Size Adjustment  
Select the desired screen size that conforms to the input signal source.  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the Screen Menu icon.  
SCREEN MENU  
1
2
Use the Point !  buttons to move the red frame pointer  
to the desired function and then press the SELECT  
button.  
Screen Menu icon  
Move the red frame pointer to the desired  
function and press the SELECT button.  
Normal  
Provide the image at the normal computer aspect ratio of 4:3.  
True  
Provide the image in its original size. When the original image  
size is larger than the screen size (1024 x 768), the projector  
ꢀNote:  
enters to the panning mode automatically. Use the Point ! ꢀ  
s4RUEꢂ &ULL SCREENꢂ AND $IGITAL ZOOM ꢐꢉn CANNOT  
BE SELECTED WHEN NO SIGNAL IS DETECTED IN THE  
0# 3YSTEM -ENUꢁ ꢃPꢁꢆꢄ  
s4HE PROJECTOR CANNOT DISPLAY AND RESOLUTION  
HIGHER THAN ꢌꢍꢅꢅ X ꢌꢈꢅꢅꢁ )F YOUR COMPUTERꢑS  
SCREEN RESOLUTION IS HIGHER THAN ꢌꢍꢅꢅ X ꢌꢈꢅꢅꢂ  
LOWER THE RESOLUTION BEFORE CONNECTING THE  
PROJECTORꢁ  
s4HE IMAGE DATA OTHER THAN 8'! ꢃꢌꢅꢈꢄ X ꢏꢍꢋ IS  
MODIFIED TO FIT THE SCREEN SIZE IN INITIAL MODEꢁ  
s4HE PANNING FUNCTION MAY NOT OPERATE PROPERLY  
IF THE STORED -ODE IN THE 0# !DJUST -ENU IS  
USEDꢁ ꢃPꢁ ꢆꢏ  
buttons to pan the image. When adjusted, the arrows will  
turn red. When reached to the correction limits, the arrows will  
disappear.  
Wide  
Provide the image to fit the wide video aspect ratio (16:9) by  
expanding the image width uniformly. This function can be used  
to provide the squeezed video signal at 16:9.  
Full screen  
Provide the full screen image.  
Custom  
Adjust the screen scale and position manually with this  
function.  
Press the SELECT button at Custom and the “Custom” is  
displayed on the screen for a few seconds. To display the  
Aspect dialog box, press the SELECT button at Custom again  
and then the Aspect dialog box appears.  
Scale H/V.............. Adjust the Horizontal/Vertical screen scale.  
H&V...................... When set to “On,” the aspect ratio is  
fixed. The “Scale V” appears dimmed and  
becomes unavailable. Adjust “Scale H,”  
then the screen scale is automatically  
modified based on the aspect ratio.  
Position H/V.......... Adjust the Horizontal/Vertical screen  
position.  
Common .............. Save the adjusted scale to all the inputs.  
Press the SELECT button at Common to  
display a confirmation box. To save the  
scale, press the SELECT button at “Yes.”  
When Custom is selected, the saved scale  
is used.  
Reset.................... Reset the all adjusted values. Press  
the SELECT button at Reset to display  
a confirmation box. To reset, press the  
SELECT button at “Yes.”  
Press the SELECT button at Common or  
Reset, to display a confirmation box.  
ꢀNote:  
s7HEN NO SIGNAL IS DETECTEDꢂ h.ORMALv IS SET  
AUTOMATICALLY AND THE !SPECT DIALOG BOX DISAPPEARSꢁ  
s4HE ADJUSTABLE RANGE FOR 3CALE (ꢉ6 AND 0OSITION (ꢉ6  
IS LIMITED DEPENDING ON THE INPUT SIGNALꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Computer Input  
SCREEN MENU  
Keystone  
This function is used to store or reset the keystone correction  
when the Main On/Off Switch is pressed to Off or the AC  
power cord is unplugged. Use the Point ꢀ buttons to switch  
between each option.  
Store. . . Keep the keystone correction even when the Main  
On/Off Switch is pressed to Off or the AC power  
cord is unplugged.  
Move the red frame pointer to the desired  
function and press the SELECT button.  
Reset . . Release the keystone correction when the Main On/  
Off Switch is pressed to Off or the AC power cord is  
unplugged.  
Ceiling  
To correct keystone distortion, press the Select button. The  
Keystone dialog box appears. Use the Point ! ꢀ buttons to  
correct keystone distortion. (p.30)  
Ceiling  
When this function is set to “On,” the picture is top/bottom and  
left/right reversed. This function is used to project the image  
from a ceiling-mounted projector.  
Rear  
Rear  
When this function is set to “On,” the picture is left/right  
reversed. This function is used to project the image from the  
rear of the screen.  
Reset  
This function returns all adjusted values to the factory default  
settings. Press the SELECT button at Reset to display a  
confirmation box. To reset, press the SELECT button at “Yes.”  
ꢀNote:  
s4HE PANNING FUNCTION MAY NOT OPERATE PROPERLY  
IF THE STORED -ODE IN THE 0# !DJUST -ENU IS  
USEDꢁ ꢃPꢁ ꢆꢏ  
Quit  
s4HE MINIMUM COMPRESSION RATIO CAN BE LIMITED  
DEPENDING ON THE INPUT SIGNAL OR WHEN THE  
+EYSTONE FUNCTION IS WORKING OR WHEN THE  
CUSTOM IS SELECTED FOR THE SCREEN SIZEꢁ  
s$IGITAL ZOOM ꢐꢉn CANNOT BE SELECTED WHEN &ULL  
SCREEN OR 4RUE IS SELECTEDꢁ  
Exit the Screen Size Adjustment Menu.  
For zooming in and out the images  
Digital zoom +  
Select Digital zoom +. The On-Screen Menu disappears and  
“D. zoom +” appears. Press the SELECT button to expand the  
image size. Use the Point ! ꢀ buttons to pan the image.  
The Panning function can work only when the image is larger  
than the screen size.  
You can also enter the Digital zoom + mode by pressing the  
D.ZOOM button on the remote control.  
Digital zoom –  
Select Digital zoom –. The On-Screen Menu disappears and  
“D.zoom –” appears. Press the SELECT button to compress the  
image size.  
You can also enter the Digital zoom – mode by pressing the  
D.ZOOM button on the remote control.  
To exit the Digital Zoom +/– mode, press any button except the  
D.ZOOM , SELECT, and Point buttons.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Input  
Video System Selection  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the AV System Menu icon.  
1
Use the Point !  buttons to move the red arrow pointer  
to the desired system and then press the SELECT button.  
2
Video Jack or S-Video Jack  
AV SYSTEM MENU (VIDEO OR S-VIDEO)  
Auto  
The projector automatically detects an incoming video system,  
and adjusts itself to optimize its performance.  
AV System Menu icon  
The selected system is displayed  
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N  
If the projector cannot reproduce proper video image, select  
a specific broadcast signal format from among PAL, SECAM,  
NTSC, NTSC 4.43, PAL-M, and PAL-N.  
Move the pointer to the desired  
system and press the SELECT button.  
Y, Pb/Cb, Pr/Cr Jacks  
AV SYSTEM MENU (COMPONENTVIDEO)  
Auto  
The projector automatically detects an incoming video signal,  
and adjusts itself to optimize its performance.  
When the Video System is 1035i or 1080i, select the system  
manually.  
AV System Menu icon  
The selected system is displayed.  
Move the pointer to the desired  
system and press the SELECT button.  
COMPONENTVIDEO SIGNAL FORMAT  
If the projector cannot reproduce proper video image, select a  
specific component video signal format from among 480i, 575i,  
480p, 575p, 720p, 1035i, and 1080i.  
ꢀNote:  
s 4HE !6 3YSTEM MENU CANNOT BE SELECTED WHEN SELECTING  
2'"ꢃ3CART ꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Input  
Image Level Selection  
Direct Operation  
Press the IMAGE SEL. button on the remote control to  
select the desired image level.  
Remote Control  
Standard  
Cinema  
Image1  
IMAGE SEL.  
button  
s
s
s
Image 10  
Menu Operation  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the Image Select Menu icon.  
IMAGE SELECT MENU  
1
Use the Point !  buttons to move the red frame pointer  
to the desired image level and then press the SELECT  
button.  
Image Select Menu icon  
2
Move the red frame pointer to the desired  
level and press the SELECT button.  
Standard  
Normal picture level preset on the projector.  
Cinema  
Picture level adjusted with fine tone.  
IMAGE 1–10  
User preset picture adjustment in the Image Adjust Menu.  
(p. 47)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Input  
Screen Size Adjustment  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the Screen Menu icon.  
SCREEN MENU  
1
Use the Point !  buttons to move the red frame pointer  
to the desired function and then press the SELECT  
button.  
Screen Menu icon  
2
Move the red frame pointer to the desired  
function and press the SELECT button.  
Normal  
Provide the image at the normal video aspect ratio of 4:3.  
ꢀNote:  
s7IDE CANNOT BE OPERATED WHEN hꢏꢈꢅPꢂv  
hꢌꢅꢆꢇIꢂv OR hꢌꢅꢋꢅIv IS SELECTED ON !6 3YSTEM  
-ENU ꢃPꢁꢄꢌ ꢁ  
Wide  
Provide the image at the wide screen ratio of 16:9.  
Custom  
Adjust the screen scale and position manually with this  
function.  
Press the SELECT button at Custom and the “Custom” is  
displayed on the screen for a few seconds. To display the  
Aspect dialog box, press the SELECT button at Custom again  
and then the Aspect dialog box appears.  
Scale H/V.............. Adjust the Horizontal/Vertical screen scale.  
H&V...................... When set to “On,” the aspect ratio is  
fixed. The “Scale V” appears dimmed and  
becomes unavailable. Adjust “Scale H,”  
then the screen scale is automatically  
modified based on the aspect ratio.  
Position H/V.......... Adjust the Horizontal/Vertical screen  
position.  
Press the SELECT button at Common or  
Reset, to display a confirmation box.  
Common .............. Save the adjusted scale to all the inputs.  
Press the SELECT button at Common to  
display a confirmation box. To save the  
scale, press the SELECT button at “Yes.”  
When Custom is selected, the saved scale  
is used.  
Reset.................... Reset the all adjusted values. Press  
the SELECT button at Reset to display  
a confirmation box. To reset, press the  
SELECT button at “Yes.”  
ꢀNote:  
s7HEN NO SIGNAL IS DETECTEDꢂ h.ORMALv IS SET  
AUTOMATICALLY AND THE !SPECT DIALOG BOX DISAPPEARSꢁ  
s4HE ADJUSTABLE RANGE FOR 3CALE (ꢉ6 AND 0OSITION (ꢉ6  
IS LIMITED DEPENDING ON THE INPUT SIGNALꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Input  
Keystone  
SCREEN MENU  
This function is used to store or reset the keystone correction  
when the Main On/Off Switch is pressed to Off or the AC  
power cord is unplugged. Use the Point ꢀ buttons to switch  
between each option.  
Store. . . Keep the keystone correction even when the Main  
On/Off Switch is pressed to Off or the AC power  
cord is unplugged.  
Reset . . Release the keystone correction when the Main On/  
Off Switch is pressed to Off or the AC power cord is  
unplugged.  
Move the red frame pointer to a function and  
press the SELECT button.  
To correct keystone distortion, press the Select button. The  
Keystone dialog box appears. Use the Point ! ꢀ buttons to  
Ceiling  
correct keystone distortion. (p.30)  
Ceiling  
When this function is set to “On,” the picture is top/bottom and  
left/right reversed. This function is used to project the image  
from a ceiling-mounted projector.  
Rear  
Rear  
When this function is set to “On,” the picture is left/right  
reversed. This function is used to project the image from the  
rear of the screen.  
Reset  
This function returns all adjusted values to the factory default  
settings. Press the SELECT button at Reset to display a  
confirmation box. To reset, press the SELECT button at “Yes.”  
Quit  
Exit the Screen Size Adjustment Menu.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Image  
Image Adjustment  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the Image Adjust Menu icon.  
IMAGE ADJUST MENU  
1
Use the Point !  buttons to move the red frame pointer  
to the desired item and then press the SELECT button  
to display the adjustment dialog box. Use the Point ꢀ  
Image Adjust Menu icon  
2
buttons to adjust the setting value.  
Move the red frame pointer to the desired  
item and then press SELECT button.  
Contrast  
Press the Point ꢀ button to decrease contrast; press the Point  
button to increase the contrast (from 0 to 63).  
Brightness  
Press the Point ꢀ button to decrease the brightness; press the  
Point button to increase the brightness (from 0 to 63).  
=
Color  
Press the Point ꢀ button to decrease the intensity of the color;  
press the Point button to increase the intensity of the color  
(from 0 to 63).  
=
Tint  
Press the Point ꢀ buttons to adjust the tint value to obtain  
proper color balance (from 0 to 63).  
Color Management  
The Color Management function can be used to adjust the  
LEVEL, PHASE, and GAMMA of the selected display colors  
(except for black, white, and gray) on the screen and replace  
these colors with other colors if required.  
Use the Point ꢀ  
buttons to adjust the  
setting value.  
You can store up to eight (8) color management data.  
Use the Point !  buttons to move the red frame pointer  
to Color Management, and then press the SELECT  
button. The projected image freezes, and the COLOR  
MANAGEMENT POINTER appears.  
1
POINTER MODE  
Use the Point ! ꢀ buttons to move the pointer to the  
spot where you want to adjust the color and then press  
the SELECT button. The COLOR SELECTION window  
appears, and the color in the center of the pointer is  
selected and you can adjust the color.  
2
COLOR MANAGEMENT  
POINTER  
Use the Point ! ꢀ buttons to adjust the LEVEL and  
PHASE of the color, and then press the SELECT button  
to confirm the setting. Then use the Point !  buttons to  
adjust the GAMMA for the color and press the SELECT  
button to accept the setting. After adjusting, press the  
SELECT button to go to the COLOR MANAGEMENT LIST.  
3
ꢀNote:  
= $ISPLAYED IN GRAYOUT IN THE COMPUTER )NPUTꢁ  
s4INT CANNOT BE SELECTED WHEN THE VIDEO SYSTEM IS  
0!,ꢂ 3%#!-ꢂ 0!,ꢀ-ꢂ OR 0!,ꢀ. ꢃPꢁꢄꢌ ꢁ  
s#OLOR MANAGEMENT IS DISPLAYED IN GRAYOUT WHEN  
THERE IS NO SIGNAL ꢁ  
COLOR SELECTION MODE  
LIST  
Go to the COLOR MANAGEMENT LIST.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Image  
COLOR SELECTION MODE (continued)  
COLOR SELECTION MODE  
COLOR M.  
Level and phase  
adjustment palette.  
Gamma  
adjustment palette.  
Return to the COLOR MANAGEMENT POINTER. (If you  
press the MENU button on the side control or the remote  
control, it returns to the COLOR MANAGEMENT POINTER  
and you will need to reselect and readjust the color.)  
MENU  
Return to the IMAGE ADJUST Menu. Any settings that  
have been changed will not be stored. To store the  
changed settings, be sure to select “LIST” and go to the  
COLOR MANAGEMENT LIST.  
In the COLOR MANAGEMENT LIST, the adjusted color  
data are checkmarked. You can decide whether or not to  
apply the adjusted color data in the list to the projected  
image (see below).  
4
LIST  
COLOR M.  
MENU  
LIST MODE  
LIST MODE  
Clear the check mark if you do not want to apply the  
adjusted color data; select the check mark and then press  
the SELECT button. The check mark disappears.  
COLOR PALETTE  
DEL  
COLOR PALETTE  
Return to the COLOR SELECTION mode so that you can  
readjust the setting for the color in that line. (This option is  
not available if the check mark is cleared.)  
DEL  
Select the DEL box if you want to delete the adjusted  
data. Press the SELECT button and a confirmation box  
appears and then select [Yes].  
ALL DEL  
Delete all the data in the list. Press the SELECT button and  
a confirmation box appears and then select [Yes].  
MENU  
The same function as stated above.  
ALL DEL  
MENU  
COLOR M.  
COLOR M.  
The same function as stated above.  
Auto picture control  
Use the Point ꢀ buttons to select the desired Auto picture  
control position (Off, L1 or L2).  
Off . . . . Auto picture control OFF position.  
L1 . . . . . Auto picture control LEVEL 1 position.  
L2 . . . . . Auto picture control LEVEL 2 position.  
Color temp.  
Use the Point ꢀ buttons to select the desired Color temp.  
level (XLow, Low, Mid, or High).  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Image  
White balance (Red/Green/Blue)  
Press the Point ꢀ button to lighten red/green/blue tone; press the  
Point button to deepen red/green/blue tone (from 0 to 63).  
Offset (Red/Green/Blue)  
Press the Point ꢀ button to lighten red/green/blue tone of the  
black level of an image; press the Point button to deepen red/  
green/blue tone of the black level of an image (from 0 to 63).  
Sharpness  
Press the SELECT button at this icon to  
display other items.  
Press the Point ꢀ button to decrease the sharpness of the image;  
press the Point button to increase the sharpness of the image  
(from 0 to 31).  
Gamma  
Use the Point ꢀ buttons to adjust the gamma value to obtain a  
better balance of contrast (from 0 to 15).  
Press the SELECT button at this  
icon to display the previous items.  
=
Noise reduction  
Noise interference on the screen can be reduced. Press the Point  
buttons to change the noise reduction mode.  
Off . . . . Noise reduction mode is “Off”  
On . . . . Noise reduction mode is “On”  
ꢀ
Press the Point ꢀ  
buttons to  
adjust the setting value.  
=
Progressive  
An interlaced video signal can be displayed in progressive mode.  
Press the Point ꢀ buttons to change the progressive scan mode.  
Off . . . . Progressive scan mode is “Off.”  
On . . . . Progressive scan mode is “On.”  
Film . . . For watching a film. With this function, the projector  
reproduces pictures faithful to the original film quality.  
ꢀNote:  
s0ICTURE IS DISTORTED AT THE MOMENT OF /Nꢉ/FF ꢉ&ILM SWITCHINGꢁ  
Reset  
To reset the adjusted data, select Reset and press the SELECT  
button. A confirmation box appears and then select [Yes]. All  
adjustments will return to their previous figures.  
Store  
To store the adjusted data, move the red frame pointer to the  
Store icon and press the SELECT button. The Image Level Menu  
appears. Move the red arrow pointer to any of the Image 1 to  
10 in which you want to set and press the SELECT button. A  
confirmation box appears and then select [Yes].  
Image Level Menu  
Move the red frame pointer to an  
image item to be set and then press  
the SELECT button.  
Quit  
Exit the Image Adjust Menu.  
ꢀNote:  
= $ISPLAYED IN GRAYOUT IN THE COMPUTER )NPUTꢁ  
s7HEN THE 7HITE BALANCE 2EDꢂ 'REENꢂ OR "LUE IS ADJUSTEDꢂ THE  
Store icon  
Press the SELECT button at this  
icon to store the adjustment.  
#OLOR TEMPꢁ LEVEL WILL CHANGE TO h!DJꢁv  
s4HE &ILM MODE IN THE 0ROGRESSIVE FUNCTION CANNOT BE SELECTED  
WHEN THE VIDEO SIGNAL FORMAT IS ꢌꢅꢋꢅI OR ꢌꢅꢆꢇIꢁ  
s0ROGRESSIVE CANNOT BE SELECTED WHEN hꢄꢋꢅPꢂv hꢇꢏꢇPꢂv OR  
hꢏꢈꢅPv IS SELECTED ꢃPꢁꢄꢌ ꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Setting  
This projector has a Setting menu that allows you to set up other various functions.  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the Setting Menu icon.  
1
SETTING MENU (Language)  
Use the Point !  buttons to move the red frame pointer  
2
to the desired item and then press the  
The Setting dialog box appears.  
SELECT button.  
Setting Menu icon  
Set the red frame pointer  
to the item and press the  
SELECT button.  
Language  
The language used in the On-Screen Menu is available in  
English, German, French, Italian, Spanish, Portuguese, Dutch,  
Swedish, Russian, Chinese, Korean, or Japanese.  
Menu  
This function allows you to adjust the position of the On-Screen  
Display and the value adjustment bar in the Picture Image  
Adjustment Menu.  
Position  
Press the SELECT button at  
Language, then the Language  
Menu appears.  
This function is used to adjust the On-Screen Menu display  
position. Press the SELECT button and the adjustment  
screen appears (arrows appear). Use the Point ! ꢀ  
buttons to adjust the position. After making the adjustment,  
press the SELECT button to return to the Menu screen.  
Simple menu  
When this function is set to “On,” the value adjustment bar in  
the Picture Image Adjustment Menu appears on the screen.  
Display  
This function decides whether to display On-Screen Displays.  
On . . . . . . . . . . . . Show all the On-Screen Displays. Use this  
function when you want to project images  
after the lamp becomes bright enough. The  
factory default setting is in this option.  
Countdown Off. . . Show the input image instead of the  
countdown when turning on the projector.  
Use this function when you want to project  
the image as early as possible even when  
the lamp is not bright enough.  
Menu  
Off . . . . . . . . . . . . Hide the On-Screen Displays except:  
L On-Screen Menu  
L “Power off?” (p.24)  
L Color management operation screen  
(pp.45-46)  
L “No signal” for Power management (p.52)  
L P-TIMER (p.30)  
L ”Please wait....” for Auto PC adjustment  
(p.35)  
L Arrows for panning mode  
Set the red frame pointer  
to the item and press the  
SELECT button.  
Background  
The selected background screen will be displayed when no  
input signal is detected.  
ꢀNote:  
Blue . . . Blue colored background.  
User . . . The image you captured.  
Black. . . Black colored background.  
sh5SERv CANNOT BE SELECTED WHEN THE IMAGE IS NOT  
CAPTUREDꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Logo  
Logo  
This function allows you to customize the screen logo with Logo  
select, Capture, and Logo PIN code lock functions.  
ꢀNote:  
s7HEN h/Nv IS SELECTED IN THE ,OGO 0). CODE LOCK FUNCTIONꢂ ,OGO  
SELECT AND #APTURE FUNCTIONS CANNOT BE SELECTEDꢁ  
Logo select  
This function decides on the starting-up display from  
among the following options.  
User . . . Show the image you captured.  
Default . Show the factory-set logo.  
Off . . . . Show the countdown display only.  
Set the red frame pointer  
to the item and press the  
SELECT button.  
Capture  
This function enables you to capture an image being  
projected to use it for a starting-up display or interval of  
presentations.  
Select Capture and press the SELECT button.  
A confirmation box appears and select [Yes] to capture the  
projected image.  
Capture  
After capturing the projected image, go to the Logo select  
function and set it to “User”. Then the captured image will  
be displayed the next time you turn on the projector.  
To cancel the Capture function, select [No].  
ꢀNote:  
Set the pointer (red  
s"EFORE CAPTURING AN IMAGEꢂ SELECT h3TANDARDv IN THE )MAGE  
3ELECT -ENU TO CAPTURE A PROPER IMAGEꢁ ꢃPPꢁ ꢆꢋꢂ ꢄꢈ  
s! SIGNAL FROM A COMPUTER CAN BE CAPTURED UP TO 8'! ꢃꢌꢅꢈꢄ  
X ꢏꢍꢋ ꢁ  
arrow) to the item and  
press the SELECT button.  
s#ERTAIN SIGNALS MAY NOT BE CAPTURED PROPERLYꢁ  
s7HEN CAPTURING THE IMAGE THAT HAS BEEN ADJUSTED BY THE  
+EYSTONE FUNCTIONꢂ THE ADJUSTED DATA IS AUTOMATICALLY RESET  
AND THE PROJECTOR CAPTURES AN IMAGE WITHOUT KEYSTONE  
CORRECTIONꢁ  
Select [Yes]  
to capture  
the projected  
image.  
s7HEN STARTING TO CAPTURE A NEW IMAGEꢂ THE PREVIOUSLY  
STORED IMAGE IS CLEARED EVEN IF YOU CANCEL THE CAPTURINGꢁ  
s/NCE YOU EXIT THE ,OGO -ENU AFTER SETTING THE ,OGO LOCK  
TO ꢎ/Nꢂꢎ YOU ARE REQUIRED TO ENTER THE 0). CODE EVERY  
ATTEMPTING TO CHANGE THE ,OGO SETTINGꢁ  
Select [Yes] to stop  
capturing.  
sh5SERv CANNOT BE SELECTED WHEN THE IMAGE IS NOT CAPTUREDꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Logo PIN Code Lock  
Logo PIN code lock  
This function prevents an unauthorized person from changing  
the screen logo.  
Off . . . . The screen logo can be changed freely from the  
Logo Menu.  
On . . . . The screen logo cannot be changed without a  
Logo PIN code.  
If you want to change the Logo PIN code lock setting, press  
the SELECT button and the Logo PIN code dialog box appears.  
Enter a Logo PIN code by following the steps below. The initial  
Logo PIN code is set to “4321” at the factory.  
Enter a Logo PIN code  
Enter a Logo PIN code  
Use the Point !  buttons on the side control or on  
the remote control to enter a number. Press the Point  
button to fix the number and move the red frame  
pointer to the next box. The number changes to “3.”  
Repeat this step to complete entering a four-digit  
number. After entering the four-digit number, move the  
pointer to “Set.” Press the SELECT button so that you  
can change the Logo PIN code lock setting.  
After a correct Logo PIN code is  
entered, the following dialog box  
appears.  
Change the Logo PIN code lock setting  
If you fixed an incorrect number, use the Point ꢀ button  
to move the pointer to the number you want to correct,  
and then enter the correct number.  
Use the Point ꢀ buttons to switch On/Off,  
If you entered an incorrect Logo PIN code, “Logo  
PIN code” and the number (3333) will turn red for a  
moment. Enter the correct PIN code all over again.  
Change the Logo PIN code  
Change the Logo PIN code lock setting  
Use the Point ꢀ buttons to switch On/Off, and then press  
the Point   button to move the pointer to “Quit.” Press the  
SELECT button to close the dialog box.  
Change the Logo PIN code  
CAUTION:  
Logo PIN code can be changed to your desired four-digit  
number. Press the Point   button to select “Logo PIN code  
change” and then press the SELECT button. The New Logo  
PIN code input dialog box appears. Set a new Logo PIN code.  
WHENYOU HAVE CHANGEDTHE LOGO PIN  
CODE,WRITE DOWNTHE NEW PIN CODE  
IN COLUMN OFTHE LOGO PIN CODE NO.  
MEMO ON PAGE 80, AND KEEP IT SECURELY.  
SHOULDTHE LOGO PIN CODE BE LOST OR  
FORGOTTEN,THE LOGO PIN CODE SETTING  
CAN NO LONGER BE CHANGED.  
Be sure to note the new Logo PIN code and keep it on hand.  
If you lost the number, you could no longer change the Logo  
PIN code setting. For details on PIN code setting, refer to “PIN  
code lock” on pages 53–54.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Lamp mode  
This Projector is equipped with 2 Projection Lamps and the  
number of using lamps can be switched to 2 lamps or 1 lamp.  
Using 1 lamp maintains the life of Projection Lamps.  
ꢀNote:  
To change over Lamp Mode  
s 7HEN NEITHER OF THE TWO LAMPS IS LIGHTEDꢂ THE  
PROJECTOR WILL SHUTDOWN AUTOMATICALLYꢁ  
s 7HEN EITHER OF THE TWO LAMPS DOES NOT LIGHT UPꢂ  
THE ,!-0 ꢌꢉꢈ 2%0,!#% INDICATOR BLINKS ORANGE  
AND THE PROJECTOR WILL LIGHT THE OTHER AUTOMATICALLYꢁ  
s !FTER CHANGING THE ,AMP -ODEꢂ IT CANNOT BE  
SWITCHED AGAIN FOR ꢊꢅ SECONDSꢁ  
Set "2 lamps mode" or "1 lamp mode" by pressing the Point ꢀ  
buttons. When the Lamp Mode is switched from "2 lamps mode"  
to "1 lamp mode", the image becomes a little darker. When the  
Lamp Mode is switched from "1 lamp mode" to "2 lamps mode",  
the image becomes brighter gradually.  
Lamp control  
This function allows you to change the brightness of the screen.  
Auto . . . . . Brightness according to the input signal.  
Normal . . . Normal brightness.  
Eco . . . . . . Lower brightness. Lower brightness reduces  
the lamp power consumption and extends the  
lamp life.  
Filter control  
ꢀNote:  
You can replace the filter with this function. Press the SELECT  
button at Filter control to display a confirmation box. To replace,  
press the SELECT button at “YES” and the electrically operated  
filter starts to scroll.  
s&ILTER REPLACEMENT ICON AND h0LEASE WAITꢁꢁꢁv  
MESSAGE APPEAR ON THE SCREEN WHEN THE FILTER IS  
BEING SCROLLEDꢁ  
s4HE FILTER CANNOT BE REWOUNDꢁ  
s7HEN THE FILTER IS REPLACEDꢂ THE TOTAL ACCUMULATED  
TIME OF THE FILTER USE IS AUTOMATICALLY SET TO ꢅꢁ  
You can also replace the filter by using the remote control  
(p. 30).  
Fan control  
Choose the running speed of cooling fans from the following  
options.  
Normal....... Normal speed.  
Max ........... Faster than the normal speed.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Remote control  
The eight different remote control codes (Code 1–Code 8) are  
assigned to the projector; the factory-set, initial code (Code 1)  
and the other seven codes (Code 2 to Code 8).  
Remote control  
The same code should be set on both the projector and the  
remote control. For example, operating the projector in “Code  
7”, the remote control code also must be switched to “Code 7”.  
To change the code for the projector;  
Select a remote control code in this Setting Menu.  
To change the code for the remote control;  
Check the Reset Switch to "Use position" in the compartment  
lid on the back of the remote control.  
And then while holding down the MENU button, press and  
release the IMAGE ADJ. button the number of corresponding  
times you would like to set the number of the remote control  
code for the projector. (See page 16)  
When pressing the SELECT button at  
Remote control, the Remote control  
code menu appears.  
To reset the code for the remote control;  
Slide the Reset Switch to "Reset position" in the compartment  
lid on back of the remote control.  
RC sensor  
Select a location of the infrared remote receiver of the remote  
control. See “Remote Control Receivers and Operating Range”  
on page 15 for details.  
Both......... Activate both the front and back receiver.  
Front........ Activate only the front receiver.  
Back......... Activate only the back receiver.  
Power management  
Power management  
For reducing power consumption as well as maintaining  
the lamp life, the Power management function turns off the  
projection lamp when the projector is not used for a certain  
period.  
If the input signal is interrupted and no button is pressed for  
more than 30 seconds, the timer display with “No signal”  
appears. It starts the countdown until the lamp is turned off. The  
countdown time can be set between 1 and 30 minutes.  
Time left before the lamp is off  
Use the Point ꢀ buttons to set the countdown timer.  
Select one of the following options:  
Ready . . . . When the lamp has been fully cooled down, the  
READY indicator starts blinking. In this condition,  
the projection lamp is turned on if the input  
signal is reconnected or any button on the side  
control or remote control is pressed .  
Shutdown. . When the lamp has been fully cooled down, the  
power is turned off.  
Press the SELECT button at Power  
management and the dialog box  
appears. Use the Point ꢀ  
buttons to choose one of the three  
options.  
Press the Point   button to select  
the timer, and then use the Point ꢀ  
buttons to set the timer  
Off . . . . . . . Power Management function is off.  
ꢀNote:  
s&ACTORY DEFAULT IS h2EADYꢒ ꢇ MINꢁv  
s7HEN THE SHUTTER IS CLOSED WHILE THE 0OWER MANAGEMENT FUNCTION  
IS WORKINGꢂ THE 0OWER MANAGEMENT FUNCTION IS RELEASEDꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
On start  
When this function is set to “On,” the projector will be  
automatically turned on just by connecting the AC power cord to  
the wall outlet.  
ꢀNote:  
s -AKE SURE THAT THE -!). /. ꢉ /&& SWITCH IS /.ꢂ OTHERWISE THE  
/N START FUNCTION DOES NOT WORKꢁ  
s "E SURE TO TURN OFF THE PROJECTOR PROPERLY ꢃSEE h4URNING /FF THE  
0ROJECTORv ON PAGE ꢈꢄ ꢁ )F THE PROJECTOR IS TURNED OFF IN THE INCORRECT  
SEQUENCEꢂ THE /N START FUNCTION DOES NOT WORK PROPERLYꢁ  
Security  
Security  
Key lock  
This function locks the side control and remote control buttons  
to prevent operation by unauthorized persons.  
. . . . . Unlocked.  
. . . . . Lock the side control buttons.  
To unlock, use the remote control.  
. . . . . Lock the remote control buttons.  
To unlock, use the side control.  
Set the red frame  
pointer to the item  
and press the  
SELECT button.  
Key lock  
If the side control accidentally becomes locked and you  
do not have the remote control nearby and unable to  
operate the projector, contact the service station.  
Select Key lock and  
this box appears.  
Choose one of the  
alternatives with the  
Point !  buttons  
and select [Yes] to  
activate it.  
PIN code lock  
This function prevents the projector from being operated  
by unauthorized persons and provides the following setting  
options for security.  
Off . . . . Unlocked.  
On1 . . . Enter the PIN code every time turning on the  
projector.  
PIN code lock  
On2 . . . Enter the PIN code to operate the projector once  
the Main On/Off Switch is pressed to Off or the  
power cord is unplugged ; as long as the AC power  
cord is connected and the Main On/Off Switch  
is pressed to ON, the projector can be operated  
without a PIN code.  
Whenever you change the PIN code lock setting or the PIN  
code (the four-digit number), you are required to enter the PIN  
code. “1234” is set as the initial PIN code at the factory.  
When the projector  
is locked with a PIN  
code, the PIN code  
lock symbol appears  
on the menu bar.  
If you want to change the PIN code lock setting, press the  
SELECT button and the PIN code dialog box appears. Enter a  
PIN code by following the steps on the next page.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Enter a PIN code  
Enter a PIN code  
Use the Point !  buttons on the side control or on  
the remote control to enter a number. Press the  
Point button to fix the number and move the red  
frame pointer to the next box. The number changes  
to “3.” Repeat this step to complete entering a four-  
digit number. After entering the four-digit number,  
move the pointer to “Set.” Press the SELECT button  
so that you can change the PIN code lock setting .  
After a correct Logo PIN code is  
entered, the following dialog box  
appears.  
If you fixed an incorrect number, use the Point ꢀ  
button to move the pointer to the number you want  
to correct, and then enter the correct number.  
Change the PIN code lock setting  
Use the Point ꢀ  
If you entered an incorrect PIN code, “PIN code” and  
the number (3333) will turn red for a moment. Enter  
the correct PIN code all over again.  
buttons to switch  
between the options.  
Change the PIN Code Lock setting  
Use the Point ꢀ button to select Off, On1, or On2 and then  
move the pointer to “Quit” with the Point   button. Press the  
SELECT button to close the dialog box.  
Change the PIN Code  
The PIN code can be changed to your desired four-digit  
number. Press the Point   buttons to select “PIN code  
change” and press the SELECT button. The New PIN code  
input dialog box appears. Set a new PIN code.  
Change the PIN code  
CAUTION:  
WHENYOU HAVE CHANGEDTHE PIN CODE,WRITE  
DOWN A NEW PIN CODE IN COLUMN OFTHE PIN CODE  
NO. MEMO ON PAGE 80, AND KEEP IT SECURELY. IF  
YOU FORGETYOUR PIN CODE,THE PROJECTOR CAN NO  
LONGER BE STARTED.  
Projector ID  
This feature allows users to set serial communication  
configuration (Projector ID) when several projectors are  
connected via the RS-232C terminal (serial port) of the  
projector.  
Use the Point ꢀ buttons to adjust the Projector ID.  
L Projector ID ... 1 - 999. (Factory default setting : Projector ID 1)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Shutter  
Shutter function is available to block out light to the  
screen, so that the screen can be used for the other  
presenters.  
Protection  
Prohibits the shutter operation from the remote control  
and the projector's side control.  
Remote control Selecting "On" prohibits the shutter  
operation from the remote control.  
Projector . . .  
Selecting "On" prohibits the shutter  
operation from the side control.  
It is possible to prohibit the shutter operation from both of  
the remote control and the side control.  
Management  
The Shutter Management function turns off the projection  
lamp when the projector is left with the shutter closed and  
the set time has passed away. The count-down time can be  
set between 5 and 180 minutes. When the count-down time  
has elapsed, the shutter will be opened up automatically and  
the lamp will be turned off to cool itself down. The SHUTTER  
indicator is blinking blue during this cooling-off period. When  
the lamp has been fully cooled down, the READY indicator  
turns green lighting and the SHUTTER indicator keeps  
blinking. Should the ON / STAND-BY button be pressed in  
this condition, the projection lamp will be turned on and the  
SHUTTER indicator turns off.  
ꢀNote:  
s4HE &ACTORY DEFAULT VALUE IS SET TO ꢌꢋꢅ MINUTES FOR  
THE COUNT DOWN TIMEꢁ  
s4HE 3HUTTER -ANAGEMENT FUNCTION CANNOT BE  
HALTEDꢁ  
Lamp counter  
This function is used to reset the lamp counter.  
This icon appears on the screen when the end of lamp life is  
approaching.  
When the lamp life reaches a recommended lamp replacement  
time, the time shown in the dialog box turns red and the Lamp  
replacement icon appears on the screen, indicating that the end  
of lamp life is approaching.  
ꢀNote:  
s4HIS ICON ALSO APPEARS AT TURNING ON AND SELECTING  
INPUT SOURCEꢁ  
When replacing the projection lamp, reset the lamp counter.  
See “Resetting the Lamp Counter” on page 62.  
ꢀNote:  
s4HE ,AMP REPLACEMENT ICON WILL NOT APPEAR WHEN THE  
$ISPLAY FUNCTION IS SET TO h/FFv ꢃPꢁꢄꢋ ꢂ OR DURING h&REEZEv  
ꢃPꢁꢈꢊ ꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Filter counter  
Filter counter  
This function is used to set a time for the filter replacement.  
Use the Point !  buttons to move the red frame pointer to Filter  
counter and then press the SELECT button. A dialog box appears  
showing the Used time option and the Scrolls remaining option.  
Set the red frame pointer  
to the item and press the  
SELECT button.  
UsedTime . . . . . . Show the total accumulated time of the  
filter use, timer setting option and the Reset  
options. When the projector reaches a time  
set in the timer setting, the Filter replacement  
icon (Fig. 1) appears on the screen and the  
total accumulated time turns red, indicating  
that the filter replacement is necessary. If  
the filter is out of scroll and the projector  
reaches a time set in the timer setting, Fig.  
2 appears on the screen, indicating that the  
Use the Point ꢀ buttons  
to set the timer. Select from  
(Off/ 400H/700H/1000H)  
depending on the use  
environment  
Fig.1 Filter replacement icon  
filter cartridge replacement is necessary.  
Scrolls remaining . . Show the scroll counter and the Reset  
options. When the filter scroll is counted  
Filter replacement icon appears on the screen  
at a set time.  
down to 1 (Scroll counter on the screen is  
showing “0 scroll(s)” , the last scroll icon  
Fig.2  
(Fig. 3) appears on the screen. When the  
filter scroll is counted down to 0, the Filter  
cartridge replacement icon (Fig. 4) appears  
on the screen and the WARNING FILTER  
indicator lights orange, indicating that the  
filter cartridge replacement is necessary.  
Fig.3 Last scroll icon  
Last scroll icon appears on the screen when  
the filter is down to the last scroll.  
To set a timer, press the SELECT button on Used time option.  
Move the red arrow pointer to the timer setting option and use  
the Point ꢀ buttons to select from (Off/ 400H/700H/1000H)  
Fig.4 Filter cartridge replacement icon  
Filter cartridge replacement icon appears on  
the screen when the filter scroll is counted  
down to 0 scroll.  
depending on the use environment.  
When replacing the Filter cartridge, reset the Filter counter and the  
Scroll counter (p.59).  
ꢀNote:  
s&IGꢁꢌꢂ &IGꢁ ꢈꢂ &IGꢁ ꢆ OR &IGꢁ ꢄ WILL APPEAR AT TURNING ON  
AND SELECTING INPUT SOURCEꢁ  
ꢀNote:  
s$O NOT RESET THE &ILTER COUNTER AND THE 3CROLL COUNTER  
WITHOUT REPLACING THE &ILTER CARTRIDGEꢁ "E SURE TO RESET THE  
&ILTER COUNTER AND THE 3CROLL COUNTER ONLY AFTER REPLACING  
THE &ILTER CARTRIDGEꢁ  
s&IGꢁꢌꢂ &IGꢁ ꢈꢂ &IGꢁ ꢆ OR &IGꢁ ꢄ WILL NOT APPEAR  
WHEN THE $ISPLAY FUNCTION IS SET TO h/FFv ꢃPꢁꢄꢋ ꢂ  
OR DURING h&REEZEv ꢃPꢁꢈꢊ ꢁ  
Factory default  
s4IMER SETTING NOTIFIES THAT THE FILTER NEEDS REPLACEMENTꢁ 4O  
REPLACE THE FILTERꢂ USE THE FILTER CONTROL FUNCTION ꢃPꢁꢇꢌ ꢁ  
Set the red frame pointer  
to the item and press the  
SELECT button.  
Test pattern  
Various test pattern are available for use when setting up the  
projector.  
Select Factory default and this box  
appears. Select [Yes], and the next  
box appears.  
Factory default  
This function returns all setting values except for the user logo,  
PIN code lock, Logo PIN code lock, lamp counter, filter counter  
and filter timer to the factory default settings.  
Quit  
Select [Yes] to  
activate it.  
Exit the Setting Menu.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Care  
Filter Instructions  
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes  
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup  
and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to  
replace the filter easily. The projector monitors the condition of the filter at all time and replaces a filter with a  
new one automatically when it detects the clogging.  
If the projector reaches a time set in the timer setting (p.  
56), a Filter replacement icon (Fig.1) appears on the screen  
and the WARNING FILTER indicator on the top panel lights  
up (p.74). When you see this icon, replace the filter as soon  
as possible (pp.30, 51). If the filter is out of scroll and the  
projector reaches a time set in the timer setting, Fig. 2  
appears on the screen, indicating that the filter cartridge  
replacement is necessary.  
Fig.1 Filter replacement icon  
When the filter scroll is counted down to 1, the Last scroll  
icon (Fig.3) appears on the screen, indicating that there is  
one scroll left in the filter cartridge (p.56).  
Fig.2  
If the projector detects that the filter is clogged and no scroll  
is left in the filter cartridge, a Filter cartridge replacement  
icon (Fig. 4) appears on the screen and the WARNING  
Fig.3 Last scroll icon  
FILTER indicator on the top panel lights up (p.74). When you  
see this icon, replace the filter cartridge (p.58) and reset the  
Filter counter (p.59) and the Scroll counter (p.59).  
When the filter is being scrolled by the remote control (p.30)  
Fig.4 Filter cartridge replacement icon  
or the Filter control function in the setting menu (p.51), a  
Filter replacement icon and “Please wait...” message (Fig.5)  
appear on the screen and the WARNING FILTER indicator  
blinks slow (approx. 2 seconds ON, 2 seconds OFF) (p.72).  
Fig.5 Filter replacement icon and  
The WARNING FILTER indicator blinks fast when the  
projector detects an abnormal condition, the filter cartridge  
is not installed properly, or the filter scroll is not working  
properly (p.74).  
“Please wait...” message.  
ꢀNote:  
s$O NOT USE THE FILTER CARTRIDGE WITH OTHER PROJECTORꢁ 4HE FILTER  
COUNTER AND THE SCROLL COUNTER DO NOT RECOGNIZE THE CORRECT  
NUMBER OF REMAINING SCROLLS OF THE USED FILTER CARTRIDGE AND THE  
RESET FUNCTION CANNOT WORK PROPERLYꢁ )T MAY CAUSE A BREAKDOWNꢁ  
s-AKE SURE THAT THE PROJECTION LAMPS ARE TURNED OFF WHEN YOU  
ARE REPLACING THE FILTER CARTRIDGEꢁ )F YOU REPLACE THE FILTER CARTRIDGE  
WHEN THE PROJECTION LAMPS ARE TURNED ONꢂ THE PROJECTOR WILL BE  
SHUT DOWN AUTOMATICALLY FOR SAFETY PURPOSESꢁ  
s$O NOT FORGET TO RESET THE FILTER COUNTER AND THE SCROLL COUNTER IN  
THE SETTING MENU AFTER REPLACING THE FILTER CARTRIDGEꢁ )F YOU FORGET  
TO RESET THE FILTER COUNTER AND THE SCROLL COUNTERꢂ THE PROJECTOR  
CANNOT RECOGNIZE THE CORRECT NUMBER OF REMAINING SCROLLS AND IT  
MAY CAUSE A BREAKDOWNꢁ  
s&IGꢁꢌꢂ &IGꢁꢈꢂ &IGꢁꢆ OR &IGꢁ ꢄ WILL NOT APPEAR WHEN THE $ISPLAY  
FUNCTION IS SET TO h/FFv ꢃPꢁꢄꢋ ꢂ OR DURING h&REEZEv ꢃPꢁꢈꢊ ꢁ  
s4HE FILTER CANNOT BE REWOUNDꢁ  
s4HE FILTER CAN BE SCROLLED ꢊ TIMES SINCE THE FILTER CARTRIDGE HAS  
ꢌꢅ SCROLLSꢁ  
s4HE FILTER CARTRIDGE IS DISPOSABLEꢁ $O NOT CLEAN AND REUSE THE  
FILTER CARTRIDGEꢁ  
s$O NOT EXPOSE THE FILTER CARTRIDGE TO WATER OR LIQUIDꢂ OR IT MAY  
CAUSE A BREAKDOWNꢁ  
s2EPLACE THE FILTER CARTRIDGE AFTER ALL THE SCROLL IS USED UPꢁ )F YOU  
REPLACE THE FILTER CARTRIDGE WHEN THERE ARE SOME SCROLLS LEFT IN  
THE FILTER CARTRIDGEꢂ THE FILTER COUNTER AND THE SCROLL COUNTER DO  
NOT RECOGNIZE THE CORRECT NUMBER OF REMAINING SCROLLS AND THE  
RESET FUNCTION CANNOT WORK PROPERLYꢁ )T MAY CAUSE A BREAKDOWNꢁ  
s4HE USED PART OF THE FILTER CAN BE SEEN ON THE EDGE OF THE &ILTER  
CARTRIDGE AFTER SCROLLING THE FILTERꢂ BUT THERE IS NO PROBLEM FOR THE  
USE OF THE PROJECTORꢁ  
s7HEN THE PROJECTOR IS KEPT USED FOR ꢆ MINUTES WITHOUT GETTING  
THE FILTER CARTRIDGE REPLACED AFTER THE &IGꢁꢄ APPEARS ON THE SCREENꢂ  
THE PROJECTOR IS TURNED OFF AUTOMATICALLY TO PREVENT THE DAMAGE OF  
OPTICAL COMPONENTSꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Care  
Replacing the Filter Cartridge  
Turn off the projector, press the Main On/Off Switch to  
Off and unplug the AC power cord from the AC outlet.  
1
Filter cover  
First, clean up the dust on the projector and around the  
air vents.  
2
Slide and open the Filter cover. (See the right figure.)  
3
Pull out the filter cartridge by holding the finger grip.  
4
Put the new one back into the position and close  
the filter cover. Make sure that the filter cartridge is  
properly and fully inserted.  
5
Connect the AC power cord to the projector and turn  
on the projector.  
6
Filter cartridge  
Reset the filter counter and the scroll counter (p.59).  
7
CAUTION  
Make sure the filter cartridge is inserted in the  
projector. If the filter cartridge is not inserted, the  
projector cannot be turned on.  
Do not put anything into the air vents. Doing so  
may result in malfunction of the projector.  
RECOMMENDATION  
We recommend avoiding dusty/smoky environments when  
operating the projector. Usage in these environments may  
cause a poor image quality.  
When using the projector under dusty or smoky conditions,  
dust may accumulate on a lens, liquid crystal panels, or optical  
elements inside the projector. Such condition may degrade the  
quality of the projected image.  
When the symptoms above are noticed, contact your authorized  
dealer or service station for proper cleaning.  
ORDER REPLACEMENT FILTER CARTRIDGE  
Replacement filter cartridge can be ordered through your  
dealer. When ordering, give the following information to the  
dealer.  
L Model No. of your projector  
LX1000  
L Replacement Filter Cartridge  
Service Parts Code: 003-002003-01  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Care  
Resetting the Filter Counter  
Be sure to reset the Filter counter after replacing the filter  
Filter counter  
cartridge.  
Press the MENU button to display the On-Screen Menu. Use  
the Point ꢀ buttons to move the red frame pointer to the  
Setting Menu icon.  
1
Use the Point !  buttons to move the red frame pointer to  
Filter counter and then press the SELECT button.  
A dialog box appears showing the Used time option and the  
2
Select “Used time” and the  
dialogue box below appears.  
Scrolls remaining option. Use the Point !  buttons to select  
Used time.  
Used time shows the total accumulated time of the filter  
use, a timer setting option, and the Reset option. Select  
Reset and the “Filter counter Reset?” appears. Select [Yes]  
to continue.  
3
Select Reset and the “Filter  
counter Reset?” appears.  
Another confirmation dialog box appears, select [Yes] to  
4
reset the Filter counter.  
Select [Yes],  
then another  
confirmation  
box appears.  
Select [Yes] again to reset  
the Filter counter.  
Resetting the Scroll Counter  
Be sure to reset the Scroll counter after replacing the filter  
cartridge.  
Scroll counter  
Press the MENU button to display the On-Screen Menu. Use  
the Point ꢀ buttons to move the red frame pointer to the  
Setting Menu icon.  
1
Use the Point !  buttons to move the red frame pointer to  
Filter counter and then press the SELECT button. A dialog  
box appears showing the Used time option and the Scrolls  
2
Select “Scrolls remaining” and  
the dialogue box below appears.  
remaining option. Use the Point !  buttons to select  
Scroll(s) remaining.  
Scroll(s) remaining shows the number of the remaining  
scrolls and the Reset option. Select Reset and the “Scroll  
counter Reset?” appears. Select [Yes] to continue.  
3
Select Reset and the “Scroll  
counter Reset?” appears.  
Another confirmation dialog box appears, select [Yes] to  
reset the Scroll counter.  
4
Select [Yes],  
then another  
confirmation  
box appears.  
ꢀNote:  
s7HILE THE SCROLL COUNTER RESET IS IN PROGRESSꢂ @@0LEASE  
WAITꢁꢁꢁꢑꢑ MESSAGE APPEARS ON THE SCREENꢂ THE COOLING FANS  
OPERATE AND THE FILTER CARTRIDGE IS ADJUSTEDꢁ  
Select [Yes] again to reset  
the Scroll counter.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Care  
Lamp Management  
This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by  
the Lamp Management Function. The Lamp Management Function detects the status of lamps and shows the  
status on screen or on the LAMP 1/2 REPLACE indicators. This function also automatically controls the Lamp  
Mode when any of lamps is out for the end of life or malfunctions.  
LAMP 1/2 REPLACE  
INDICATORS  
Lamp mode  
Lamp 1/2 Replace Indicators  
The LAMP 1/2 REPLACE indicators light orange when any of Projection Lamps is nearing its end, and flash  
when any of them becomes out. Check the number of lamp on the Lamp Status Display or the LAMP 1/2  
REPLACE indicators and replace the lamp.  
Lamp Status Display  
The Lamp Status Display appears on screen when the projector is turned on or the input position (input 1, input  
2, Input 3 or input 4) is switched. This shows the status of each lamp as; ON, OFF, NEAR END, or OUT. Refer  
to the following for each status.  
Yellow Lamp  
Dim Lamp  
Red Lamp  
Projection Lamp lights normally.  
Projection Lamp is turned off.  
Projection Lamp is nearing its end. When the image  
becomes darker or the color becomes unnatural,  
replace lamp. (LAMP 1/2 REPLACE indicator lights  
orange.)  
LAMP STATUS  
DISPLAY  
X Mark on Lamp  
(LAMP 1/2 REPLACE indicator flashes orange.)  
Projection lamp is defective or fails to be turned on.  
Restart the projector on, and make sure lamp is on.  
If this mark still appears, replace lamp corresponding  
with number marked X.  
Lamp Mode Changeover  
The Lamp Management Function automatically changes the lighting lamp (Lamp Mode) by detecting the status of lamp.  
When either of the 2 lamps is out, the projector operates with 1 lamp. The Lamp Mode can be switched to 2 lamps or 1  
lamp manually. Refer to the SETTING section on page 51.  
When Lamp 1 is burnt out.  
1 LAMP MODE  
2 LAMP MODE  
When Lamp 2 is burnt out.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Care  
Lamp Replacement  
When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the  
screen and LAMP 1/2 REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing  
when the LAMP 1/2 REPLACE indicators should light is depending on the lamp mode.  
Indicators  
WARNING:  
TURN OFFTHE UV LAMP BEFORE  
OPENINGTHE LAMP COVER.  
Lamp replacement icon  
Allow the projector to cool, for at least 45 minutes  
before you open Lamp Cover. The inside of the  
projector can become very hot.  
LAMP 1 / 2 REPLACE indicators  
CAUTION  
ꢀNote:  
For continued safety, replace with a lamp assembly  
of the same type.  
Do not drop the lamp assembly or touch a glass  
bulb!The glass can shatter and may cause injury.  
s4HE ,AMP REPLACEMENT ICON WILL NOT APPEAR  
WHEN THE $ISPLAY FUNCTION IS SET TO h/FFv ꢃPꢁꢄꢋ ꢂ  
OR DURING h&REEZEv ꢃPꢁꢈꢊ ꢁ  
Follow these steps to replace the lamp.  
Check the number of lamp to be replaced on the Lamp  
Status Display.  
1
Turn off the projector, press the Main On/Off Switch to Off  
and unplug the AC power cord from the AC outlet. Let  
the projector cool for at least 45 minutes.  
2
3
4
Loosen a screw on the Lamp Cover. Slide and open the  
Lamp Cover until it makes a clicking sound. (See the right  
figure.)  
LAMP  
COVER  
SCREW  
LAMP 2  
Loosen two screws and pull out the Lamp to be replaced  
by grasping handle.  
Replace the Lamp with a new one and tighten two  
screws. Make sure the Lamp is set properly.  
5
6
7
8
Put the Lamp Cover back and tighten a screw.  
Connect the AC Power Cord to the projector and turn on  
the projector.  
SCREWS  
LAMP 1  
Reset the Lamp Replacement Counter. (Refer to section  
"Resetting the Lamp Counter" on page 62.)  
Make sure which number of lamp needs to be  
replaced on Lamp Status Display.  
Figure shows case of replacing LAMP 1.  
NOTE : Do not reset LAMP REPLACEMENT COUNTER when  
lamp is not replaced.  
CAUTION : DO NOT OPERATETHE PROJECTORWHILE ANY OF LAMPS IS REMOVED. IT MAY RESULT IN  
MALFUNCTIONS, FIRE HAZARD, OR OTHER ACCIDENTS.  
NOTES ON LAMP REPLACEMENT  
To maintain quality of picture (better balance of color and brightness in entire screen), we  
recommend replacing both 2 lamps at a time.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Care  
Resetting the Lamp Counter  
Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP 1/2  
REPLACE indicator stops lighting and the Lamp replacement icon disappears.  
Lamp counter  
Press the MENU button to display the On-Screen Menu.  
Use the Point ꢀ buttons to move the red frame pointer  
to the Setting Menu icon  
1
2
Use the Point !  buttons to move the red frame pointer  
to Lamp counter and then press the SELECT button.  
A dialog box appears. Select a lamp and the “Lamp  
replacement counter Reset?” appears. Select [Yes] to  
continue.  
Select a lamp and the “Lamp  
replacement counter Reset?”  
appears.  
Another confirmation dialog box appears and select [Yes]  
to reset the Lamp counter.  
3
ꢀNote:  
s$O NOT RESET THE ,AMP COUNTER WITHOUT REPLACING THE LAMPꢁ  
"E SURE TO RESET THE ,AMP COUNTER ONLY AFTER REPLACING THE  
LAMPꢁ  
Select [Yes], then another  
confirmation box appears.  
Select [Yes] again  
to reset the lamp  
counter.  
ORDER REPLACEMENT LAMP  
Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the  
following information to the dealer.  
L Model No. of your projector  
L Replacement LampType No.  
:
:
LX1000  
003-120479-01  
(Service Parts No. 610 341 9497)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Care  
LAMP HANDLING PRECAUTIONS  
This projector uses a high-pressure lamp which must be handled carefully and properly.  
Improper handling may result in accidents, injury, or create a fire hazard.  
L Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no  
guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a  
shorter period of time than other similar lamps.  
L If the projector indicates that the lamp should be replaced, i.e., if the LAMP 1/2 REPLACE indicators  
light up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow  
carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp  
with the LAMP 1/2 REPLACE indicators lighted may increase the risk of lamp explosion.  
L Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its  
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in  
which the projector and lamp are being used.  
IF A LAMP EXPLODES,THE FOLLOWING SAFETY PRECAUTIONS SHOULD BETAKEN.  
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an  
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check  
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out  
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one  
should check the inside of the projector except those who are authorized trained technicians and who  
are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those  
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken  
glass.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Care  
Cleaning the Projection Lens  
Turn off the projector, press the Main On/Off Switch to Off  
and unplug the AC power cord from the AC outlet before  
cleaning.  
Gently wipe the projection lens with a cleaning cloth that  
contains a small amount of non-abrasive camera lens  
cleaner, or use a lens cleaning paper or commercially  
available air blower to clean the lens.  
Avoid using an excessive amount of cleaner. Abrasive  
cleaners, solvents, or other harsh chemicals might scratch  
the surface of the lens.  
Cleaning the Projector Cabinet  
Turn off the projector, press the Main On/Off Switch to Off  
and unplug the AC power cord from the AC outlet before  
cleaning.  
Gently wipe the projector body with a soft dry cleaning  
cloth. When the cabinet is heavily soiled, use a small amount  
of mild detergent and finish with a soft dry cleaning cloth.  
Avoid using an excessive amount of cleaner. Abrasive  
cleaners, solvents, or other harsh chemicals might scratch  
the surface of the cabinet.  
When the projector is not in use, put the projector in  
an appropriate carrying case to protect it from dust and  
scratches.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Care  
Warning Indicators  
The WARNING indicators show the state of the function which protects the projector. Check the state of the  
WARNINGTEMP. indicator and the LAMP indicator to take proper maintenance.  
The projector is shut down and the WARNING TEMP.  
indicator is blinking red.  
Indicators  
When the temperature inside the projector reaches a  
certain level, the projector will be automatically shut down  
to protect the inside of the projector. The LAMP indicator  
turns red brighter and the WARNINGTEMP indicator  
blinks while the projector is being cooled down. When the  
projector has cooled down enough (to its normal operating  
temperature), it can be turned on again by pressing the ON/  
STAND-BY button.  
ꢀNote:  
s4HE 7!2.).' 4%-0ꢁ INDICATOR CONTINUES TO BLINK EVEN AFTER THE  
TEMPERATURE INSIDE THE PROJECTOR RETURNS TO NORMALꢁ 7HEN THE PROJECTOR  
IS TURNED ON AGAINꢂ THE 7!2.).' 4%-0ꢁ INDICATOR STOPS BLINKINGꢁ  
WARNINGTEMP.  
blinking red  
Then check the matters below:  
– Did you provide appropriate space for the projector to be  
ventilated? Check the installing condition to see if the air  
vents of the projector are not blocked.  
– Has the projector been installed near an Air-Conditioning/  
Heating Duct or Vent? Move the installation of the  
projector away from the duct or vent.  
– Is the filter clean? Replace the filter with a new one.  
The projector is shut down; and the LAMP indicator is  
lighting and other indicators are blinking.  
Indicators  
When the projector detects an abnormal condition, it  
will be automatically shut down to protect the inside of  
the projector and the LAMP indicator lights on and other  
indicators blink. In this case, unplug the AC power cord and  
plug it, and then turn on the projector once again to verify  
operation. If the projector cannot be turned on and these  
indicators are still lighting and blinking, unplug the AC power  
cord and contact the service station.  
CAUTION  
LAMP indicator lights on  
and other indicators blink.  
DO NOT LEAVETHE PROJECTOR WITHTHE  
AC POWER CORD CONNECTED UNDER AN  
ABNORMAL CONDITION. IT MAY RESULT IN FIRE  
OR ELECTRIC SHOCK.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Before calling your dealer or service center for assistance, check the items below once again.  
1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21.  
2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly  
connected.  
3. Make sure that all power is switched on.  
4. If the projector still does not produce an image, restart your computer.  
5. If an image still does not appear, disconnect the projector from your computer and check your computer  
monitor’s display. A problem may be noticed with your graphics controller rather than with the projector.  
(When you reconnect the projector, be sure to turn the computer and monitor off before you turn on the  
projector. Turn on equipment in the order of the projector and computer.)  
6. If a problem still persists, check the following solutions.  
Problem:  
Solutions  
– Plug the power cord of the projector into the AC outlet.  
–Turn the MAIN ON/OFF switch to ON.  
– Press the ON/STAND-BY Button to ON.  
– Make sure the READY Indicator lights.  
– Check the indicators. If the LAMP indicator lights and the other indicators blink, the  
projector cannot be turned on.  
No power.  
(Refer to page 65.)  
– Check the projection lamp. (Refer to page 61.)  
PIN code dialog box  
appears at start-up.  
–PIN code lock is being set. Enter a PIN code; the “1234” or numbers you have set (see  
pages 23, 53-54)  
The initial display is not  
shown.  
– Make sure “Off ” or “Countdown Off” are not chosen at Display function.  
(See “SETTING” section on page 48)  
The initial display is not  
same with the default  
one.  
– Make sure “User” or “Off” are not chosen at Logo select function.  
(See “SETTING” section on page 49)  
When the projector is on  
and you press the input  
button, an icon other  
than the Lamp mode icon  
appears.  
– That is the Filter warning icon. Refer to page 56.  
An icon other than Input  
mode or Lamp mode icon  
appears.  
– That is the Lamp replacement icon or the Filter warning icon. See page 55-56.  
– Check the connection between your computer or video equipment and the projector.  
– See if the input signal is correctly output from your computer. Some laptop computers  
may need to be changed the setting for monitor output when connected to the  
projector. See your computer’s instruction manual for the setting.  
No image.  
– It takes about 20 seconds to display an image after turning on the projector.  
– See if the selected system is corresponding with your computer or video equipment.  
– Select correct input source once again through menu operation (see pages 31, 41-42).  
– Make sure the temperature is not out of Operating Temperature  
(41˚F–104˚F [5˚C–  
40˚C]).  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
ꢀ
–
–
The end of lamp life is approaching. Replace the lamp with a new one promptly.  
(See page 55)  
appears on the screen  
The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See  
pages 57-58)  
appears on the screen  
– Adjust the focus of the projector.  
– Check Projection Lens to see if it needs cleaning.  
ꢀNote: Moving the projector from a cool temperature location to a warm temperature  
location may result in moisture condensation on Projection Lens. In such cases,  
leave the projector OFF and wait until condensation evaporates.  
– Projecting from excessive slant angle to the screen may cause keystone distortion and  
partial imperfect focus.  
The image is out of focus.  
–Check if “Contrast” or “Brightness” are adjusted properly. (See page 45)  
–Check if “Image level” is selected properly. (See pages 38, 42)  
–Check the Lamp control function. ( See “SETTING” section on page 51)  
– Check the Lamp 1/2 replace indicators. If it lights, the end of lamp life is approaching.  
Replace the lamp with a new one promptly. (See page 61)  
The image is not bright  
enough.  
–The image is darker when 1 lamp mode is selected, compared with 2 lamp mode.  
Check the lamp mode at SETTING section on page 51.  
–Check the Input signal, color system, video system, or computer system mode.  
– Check the Ceiling / Rear function. (See pages 40, 44.)  
The color is strange.  
The image is Left/Right  
reversed.  
The image isTop/Bottom  
reversed.  
– Check the Ceiling function. (See pages 40, 44.)  
The image is distorted or  
runs off.  
–Check “PC Adjust” menu or “ Screen” menu and adjust them.  
–Check the Input signal. Auto PC Adjustment function cannot work when 480p, 575p,  
720p, 480i, 575i, 1035i, or 1080i is selected or when the digital signal is input into DVI  
terminal. (See page 35)  
Auto PC adjustment  
function does not work.  
Some displays are not  
seen during the operation.  
– Check the Display function (see page 48).  
The setting does not  
remain after turning off  
power.  
–Make sure you selected “Store” after adjusting settings. Some settings cannot be  
stored if not registered with “Store”.  
Power management  
function does not work.  
–Power management function cannot work while “Freeze” function is running or the  
shutter is closed.  
Image disappears  
automatically.  
– Check the power management function in the Setting. The power management is set  
to "On" at the factory.  
Capture function does not  
work.  
–Check the connection to see if there is signal.  
Some menus cannot be  
selected.  
–Each of the Video Input and Computer Input has a limit on selectable menus.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
The power is turned off  
automatically.  
–Power management function runs by initial setting. Check “SETTING” section on page  
52.  
You cannot operate with  
the side control.  
–The side control is not available If the side control is locked at “Key lock” under  
“Security” of SETTING section. Please check “SETTING” section on page 53.  
–Check the batteries.  
–Check if the RC sensor is set properly.(See page 52)  
–Make sure no obstruction is between the projector and remote control.  
–Make sure you are not too far from the projector when using the remote control.  
Maximum operating range is 16.4’ (5m).  
–Make sure that the remote control code conforms to the projector’s code.  
(See “SETTING” section on page 52.)  
The Remote Control does  
not work.  
–Make sure the reset switch in the compartment lid on back of the remote control is set  
to use position.  
–Unlock the Key lock function for the remote control. (See page 53)  
–Wireless remote control does not work when the remote control cable is connected to  
the projector. (See page 15)  
–Check the status of the projector with referring to “ INDICATORS AND PROJECTOR  
CONDITION” on pages 72-74.  
Indicators blinks or lights.  
appears on the screen  
–Your operation is invalid. Operate correctly.  
Unable to unlock the Logo  
PIN code lock, Security  
key lock or Security PIN  
code lock.  
–Contact the dealer where you purchased the projector or the service center.  
–Contact the dealer where you purchased the projector or the service center.  
Forget the Logo PIN code  
or Security PIN code.  
WARNING:  
High voltages are used to operate this projector. Do not attempt to open the cabinet.  
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector  
or the service center. Specify the model number and explain about the problem. We will advise you how to obtain  
service.  
This symbol on the nameplate means the product is Listed by Underwriters  
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety  
standards against risk of fire, casualty, and electrical hazards.  
The CE Mark is a Directive conformity mark of the European Community (EC).  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
MenuTree  
Computer Input/Video Input  
(1)  
(1)  
Input 1  
RGB (PC analog)  
RGB (Scart)  
Go to System  
Input  
RGB (PC digital)  
RGB (AV HDCP)  
Go to System  
Go to System  
Go to System  
Go to System  
(1)  
(1)  
(3)  
RGB  
Input 2  
Y, Pb/Cb,Pr/Cr  
Video  
(2)  
(2)  
Go to System  
Go to System  
S-video  
Input 3  
Input 4  
(For Optional Interface Boards)  
(For Optional Interface Boards)  
Information  
Image Adjust  
Image Adjust  
Contrast  
Brightness  
Color =  
0–63  
0–63  
0–63  
0–63  
Color  
Input  
Information  
H-sync freq.  
V-sync freq.  
Screen  
Language  
Lamp mode  
Tint =  
Color  
management  
Gamma  
List  
Lamp control  
Power management  
Color M.  
AllDel  
Menu  
Remote Control  
Projector  
Shutter management  
Menu  
Color M.  
5 - 180 Min  
Off/L1/L2  
Auto picture  
control  
Security  
Key lock  
PIN code lock  
Color temp.  
XLow  
Low
Remote control  
Mid  
High  
Adj.  
Red  
Green  
Blue  
0–63  
0–63  
0–63  
Offset  
Red/Green/Blue/Quit  
Sharpness  
Gamma  
0–31  
0–15  
Noise reduction = Off/On  
Progressive =  
Off/On/Film  
Reset  
Store  
Yes / No  
Image 1  
Image 10  
Quit  
Quit  
=
$ISPLAYED IN GRAYOUT IN THE COMPUTER )NPUTꢁ  
ꢀNote:  
s4HE -ENU DISPLAY VARIES DEPENDING ON THE INPUT SIGNALꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Computer Input  
(1)  
Mode 1  
Mode 2  
SVGA 1  
SVGA 2  
SVGA 3  
Standard  
Real  
System  
Image Select  
Image 1  
Image 10  
= System displayed in the System Menu varies depending on the input signal.  
Auto PC adj.  
Normal  
True  
PC Adjust  
Screen  
Fine sync.  
Total dots  
0–31  
Wide  
Position H  
Position V  
Full screen  
Scale  
H / V  
Custom  
H & V  
On/Off  
H / V  
H-sync freq.  
V-sync freq.  
Quit  
Current mode  
Position  
Common  
Reset  
Clamp  
Quit  
Digital zoom +  
Digital zoom -  
Display area - H  
Display area - V  
Reset  
Yes/No  
Keystone  
Store  
Mode free  
Store  
Reset  
On/Off  
On/Off  
Ceiling  
Rear  
Mode 1  
Reset  
Quit  
Yes/No  
Mode 10  
Quit  
Quit  
Video Input  
(2)  
(3)  
Auto  
Auto  
System  
System  
PAL  
1080i  
1035i  
720p  
575p  
480p  
575i  
SECAM  
NTSC  
NTSC 4.43  
PAL-M  
PAL-N  
480i  
Standard  
Cinema  
Image 1  
Normal  
Wide  
Image Select  
Screen  
Scale  
H / V  
Custom  
H & V  
On/Off  
Position  
Common  
Reset  
H / V  
Image 10  
Quit  
Keystone  
Store  
Reset  
On/Off  
On/Off  
Yes/No  
Ceiling  
Rear  
Reset  
Quit  
ꢀNote:  
s4HE -ENU DISPLAY VARIES DEPENDING ON THE INPUT SIGNALꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Computer Input/Video Input  
Language  
12 languages provided.  
Quit  
Setting  
Menu  
Position/Simple Menu/Quit  
Off/Countdown Off/On  
Blue/User/Black  
Display  
Background  
Logo  
Off/Default/User  
Logo select  
Capture  
Yes/No  
Logo PIN code lock  
On/Off  
Logo PIN code change  
Quit  
Quit  
2-Lamp mode/ 1-Lamp mode  
Lamp mode  
Lamp control  
Filter control  
Auto/Normal/Eco  
Yes/No  
Fan control  
Normal/Max  
Code 1  
Remote Control  
Code 8  
Quit  
RC sensor  
Both/Front/Back  
Off/Ready/Shut down  
1–30 Min.  
Power management  
Quit  
On start  
Security  
On/Off  
Key lock  
Off  
Projector  
Remote Control  
PIN code lock  
Quit  
Off/On1/On2  
PIN code change  
Quit  
Projector ID  
Shutter  
1–999  
Protection  
Remote control  
Projector  
On / Off  
On / Off  
Management  
Quit  
5 - 180 Min.  
Lamp counter  
Filter counter  
Lamp 1/2 [ ] Hour(s)  
Yes/No  
Reset  
Quit  
[ ] Hour(s)  
Used time  
Off/400H/700H/1000H  
Yes/No  
Reset  
Quit  
Scrolls remaining  
Quit  
Scroll(s)  
Yes/No  
Reset  
Quit  
Test pattern  
8 test patterns provided  
Quit  
Factory default  
Quit  
Yes/No  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Indicators and Projector Condition  
Check the indicators for the projector condition.  
The projector is operating normally.  
Indicators  
WARNING WARNING  
LAMP 1/2  
REP.  
orange  
Projector Condition  
LAMP  
red  
READY  
green  
SHUTTER  
blue  
TEMP.  
FILTER  
red  
orange  
The projector is off. (The main On/Off switch is OFF  
position or the AC power cord is unplugged.)  
The projector is in stand-by mode. Press the ON/  
STAND-BY button to turn on the projector.  
=
=
=
=
=
The projector is operating normally.  
(The Shutter is open)  
The projector is operating normally.  
(The Shutter is closed)  
=
=
=
=
The projector is preparing for stand-by or the  
projection lamp is being cooled down. The projector  
cannot be turned on until cooling is completed and  
the READY indicator lights green.  
=
The projection lamp is being cooled down in the  
Power management mode.  
=
=
=
=
=
The projector is in the Power management mode.  
The projection lamp is being cooled down in the  
Shutter management mode.  
=
=
=
The projector is in the Shutter management mode.  
Press the ON/STAND-BY button to turn on the  
projector.  
=
=
The filter is scrolled using the FILTER button on  
the remote control or the Filter control function in  
the setting menu. When the filter is being scrolled,  
the Filter replacement icon and “Please wait...”  
message (Fig. 1) appear on the screen.  
Fig.1 Filter replacement icon and “Please wait...”  
s s s ON  
s s s BLINKING SLOW  
(approx. 2 seconds ON,  
s s s BLINKING AT THE NORMAL RATE  
(approx. 1 second ON,  
1 second OFF)  
2 seconds OFF)  
s s s DIM  
s s s OFF  
s s sBLINKING FAST  
s s s Differs according to conditions.  
=
(approx. 0.5 seconds ON,  
0.5 seconds OFF)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
The projector is detecting abnormal condition.  
Indicators  
WARNING WARNING  
LAMP 1/2  
REP.  
orange  
Projector Condition  
LAMP  
red  
READY  
green  
SHUTTER  
blue  
TEMP.  
FILTER  
red  
orange  
The temperature inside the projector is elevated  
close to the abnormally high level.  
=
=
=
=
=
=
The temperature inside the projector is abnormally  
high. The projector cannot be turned on. When  
the projector is cooled down enough and the  
temperature returns to normal, the READY indicator  
lights green and the projector can be turned on. (The  
WARNINGTEMP. indicator keeps blinking.)  
The projector has been cooled down enough and  
the temperature returns to normal. When turning on  
the projector, the WARNINGTEMP. indicator stops  
blinking. Check and replace the filter.  
=
=
=
=
=
The lamp cannot light up. (The projector is preparing  
for stand-by or the projection lamp is being cooled  
down. The projector cannot be turned on until  
cooling is completed.)  
The lamp cannot light up. (The lamp has been  
cooled down enough and the projector is in stand-  
by mode and ready to be turned on with the ON/  
STAND-BY button.)  
=
=
=
=
=
=
When either of the 2 lamps is out, the projector  
operates with 1 lamp.  
=
=
The lamp has been used overtime. Replace the  
lamp immediately and then reset the lamp counter.  
The indicator will be turned off after resetting the  
counter.  
=
=
WARNING FILTER  
When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING  
FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new  
one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.59).  
LAMP REPLACE 1 and 2  
When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps  
with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 55, 61, and 62.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
The projector is detecting abnormal condition.  
Indicators  
WARNING WARNING  
LAMP 1/2  
REP.  
orange  
Projector Condition  
LAMP  
red  
READY  
green  
SHUTTER  
blue  
TEMP.  
FILTER  
red  
orange  
If the Filter counter reached a time set in the timer  
setting, a Filter replacement icon (Fig.2) appears  
on the screen and the WARNING FILTER indicator  
on the top panel lights up. Replace the filter as  
soon as possible. If the filter is out of scroll and the  
projector reaches a time set in the timer setting, Fig.  
3 appears on the screen and the WARNING FILTER  
indicator lights up. Replace the filter cartridge as  
soon as possible.  
=
=
Fig.2 Filter replacement icon  
If the filter is clogged and no scroll is left in the filter  
cartridge, a Filter cartridge replacement icon (Fig.4)  
appears on the screen and the WARNING FILTER  
indicator lights up. Replace the filter cartridge as  
soon as possible.  
Fig.3  
ꢀNote:  
Fig.4 Filter cartridge replacement icon  
s&IGꢁꢈꢂ &IGꢁꢆ AND &IGꢁꢄ ICON WILL NOT APPEAR WHEN  
THE $ISPLAY FUNCTION IS SET TO h/FFv ꢃPꢁꢄꢋ ꢂ OR DURING  
h&REEZEv ꢃPꢁꢈꢊ ꢁ  
The projector detects an abnormal condition during  
filter scroll.  
=
=
=
=
=
=
The projector is being cooled down after detecting  
an abnormal condition during filter scroll.  
The projector has been cooled down enough and is  
in the stand-by mode after detecting an abnormal  
condition during filter scroll.  
The filter cartridge is not installed in the projector.  
Check the filter compartment to see if the filter  
cartridge is installed in the projector. When the filter  
cartridge is installed and the indicators continue to  
light and blink, read the column below.  
The projector detects an abnormal condition and  
cannot be turned on. Unplug the AC power cord and  
plug it again to turn on the projector. If the projector  
is turned off again, unplug the AC power cord and  
contact the dealer or the service center. Do not  
leave the projector on. It may cause an electric  
shock or a fire hazard.  
=
=
The shutter is out of control.  
=
=
=
The shutter is out of control. (The projector is in the  
cooling mode.)  
=
=
=
The shutter is out of control. (The projector is in the  
stand-by mode.) In that case, contact the service  
station immediately.  
=
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Compatible Computer Specifications  
Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below  
and less than 230 MHz of Dot Clock.  
PC Adjustment can be limited when these modes are selected.  
ON-SCREEN  
DISPLAY  
VGA 1  
ON-SCREEN  
DISPLAY  
SXGA 6  
SXGA 7  
SXGA 8  
SXGA 9  
SXGA 10  
SXGA 11  
SXGA 12  
RESOLUTION H-Freq.(kHz) V-Freq.(Hz)  
RESOLUTION H-Freq.(kHz) V-Freq.(Hz)  
640x480  
720x400  
640x400  
640x480  
640x480  
640x480  
640x480  
640x480  
640x480  
640x480  
768x575  
31.470  
31.470  
31.470  
37.860  
37.860  
37.500  
43.269  
34.970  
35.000  
31.470  
31.250  
59.880  
70.090  
70.090  
74.380  
72.810  
75.000  
85.000  
66.600  
66.670  
59.880  
50.000  
1280x1024  
1280x1024  
1280x1024  
1280x1024  
1280x960  
1152x900  
1152x900  
71.690  
81.130  
63.980  
79.976  
60.000  
61.200  
71.400  
67.190  
76.107  
60.020  
75.025  
60.000  
65.200  
75.600  
VGA 2  
VGA 3  
VGA 4  
VGA 5  
VGA 6  
VGA 7  
MAC LC13  
MAC 13  
480p  
1280x1024  
(Interlace)  
SXGA 13  
50.000  
86.000  
1280x1024  
(Interlace)  
1280x1024  
1280x1024  
1152x900  
SXGA 14  
50.000  
94.000  
575p  
SXGA 15  
SXGA 16  
SXGA 17  
63.370  
76.970  
61.850  
60.010  
72.000  
66.000  
768x576  
(Interlace)  
575i  
15.625  
50.000  
640x480  
(Interlace)  
480i  
15.734  
60.000  
1280x1024  
(Interlace)  
SXGA 18  
46.430  
86.700  
SVGA 1  
SVGA 2  
SVGA 3  
SVGA 4  
SVGA 5  
SVGA 6  
SVGA 7  
SVGA 8  
SVGA 9  
SVGA 10  
SVGA 11  
MAC 16  
XGA 1  
XGA 2  
XGA 3  
XGA 4  
XGA 5  
XGA 6  
XGA 7  
XGA 8  
800x600  
800x600  
800x600  
800x600  
800x600  
800x600  
800x600  
800x600  
800x600  
800x600  
800x600  
832x624  
1024x768  
1024x768  
1024x768  
1024x768  
1024x768  
1024x768  
1024x768  
1024x768  
35.156  
37.880  
46.875  
53.674  
48.080  
37.900  
34.500  
38.000  
38.600  
32.700  
38.000  
49.720  
48.360  
68.677  
60.023  
56.476  
60.310  
48.500  
44.000  
63.480  
56.250  
60.320  
75.000  
85.060  
72.190  
61.030  
55.380  
60.510  
60.310  
51.090  
60.510  
74.550  
60.000  
84.997  
75.030  
70.070  
74.920  
60.020  
54.580  
79.350  
SXGA 19  
SXGA 20  
SXGA+ 1  
SXGA+ 2  
SXGA+ 3  
SXGA+ 4  
SXGA+ 5  
MAC 21  
MAC  
1280x1024  
1280x1024  
1400x1050  
1400x1050  
1400x1050  
1400x1050  
1400x1050  
1152x870  
1280x960  
1280x1024  
1366x768  
1360x768  
1376x768  
1360x768  
1280x768  
1280x768  
1280x768  
1280x800  
1280x800  
1280x800  
1920x1200  
1680x1050  
1440x900  
1600x1200  
1600x1200  
1600x1200  
1600x1200  
1600x1200  
1280x720  
1280x720  
63.790  
91.146  
63.970  
65.350  
65.120  
64.030  
62.500  
68.680  
75.000  
80.000  
48.360  
47.700  
48.360  
56.160  
47.776  
60.289  
68.633  
49.600  
41.200  
49.702  
74.556  
65.290  
55.935  
75.000  
81.250  
87.500  
93.750  
106.250  
45.000  
37.500  
60.180  
85.024  
60.190  
60.120  
59.900  
60.010  
58.600  
75.060  
75.080  
75.080  
60.000  
60.000  
60.000  
72.000  
59.870  
74.893  
84.837  
60.050  
50.000  
59.810  
59.885  
59.954  
59.887  
60.000  
65.000  
70.000  
75.000  
85.000  
60.000  
50.000  
MAC  
WXGA 1  
WXGA 2  
WXGA 3  
WXGA 4  
WXGA 6  
WXGA 7  
WXGA 8  
WXGA 9  
WXGA 10  
WXGA 11  
WUXGA 1  
WSXGA+ 1  
WXGA+ 1  
UXGA 1  
UXGA 2  
UXGA 3  
UXGA 4  
UXGA 5  
720p  
1024x768  
(Interlace)  
XGA 9  
36.000  
87.170  
=
XGA 10  
XGA 11  
1024x768  
1024x768  
62.040  
61.000  
77.070  
75.700  
1024x768  
(Interlace)  
XGA 12  
35.522  
86.960  
=
=
=
=
XGA 13  
XGA 14  
XGA 15  
MAC 19  
SXGA 1  
SXGA 2  
SXGA 3  
SXGA 4  
SXGA 5  
1024x768  
1024x768  
1024x768  
1024x768  
1152x864  
1280x1024  
1280x1024  
1280x1024  
1280x1024  
46.900  
47.000  
58.030  
60.240  
64.200  
62.500  
63.900  
63.340  
63.740  
58.200  
58.300  
72.000  
75.080  
70.400  
58.600  
60.000  
59.980  
60.010  
720p  
1920x1035  
1035i  
1080i  
33.750  
33.750  
28.125  
60.000  
60.000  
50.000  
(Interlace)  
1920x1080  
(Interlace)  
1920x1080  
(Interlace)  
=
“True” cannot be selected when WUXGA1, UXGA2, UXGA3, UXGA4 and UXGA5 are selected (p.39)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
When an input signal is digital from the DVI terminal, refer to the chart below.  
ON-SCREEN  
DISPLAY  
D-VGA  
ON-SCREEN  
DISPLAY  
RESOLUTION H-Freq.(kHz) V-Freq.(Hz)  
RESOLUTION H-Freq.(kHz) V-Freq.(Hz)  
640x480  
720x480  
31.470  
31.470  
31.250  
37.879  
43.363  
48.360  
47.700  
48.360  
56.160  
46.500  
47.776  
60.289  
68.633  
49.600  
41.200  
49.702  
63.980  
60.276  
59.940  
59.880  
50.000  
60.320  
60.000  
60.000  
60.000  
60.000  
72.000  
50.000  
59.870  
74.893  
84.837  
60.050  
50.000  
59.810  
60.020  
58.069  
D-SXGA+ 1  
D-SXGA+ 2  
D-SXGA+ 3  
D-WSXGA+ 1  
D-WXGA+ 1  
D-720p  
1400x1050  
1400x1050  
1400x1050  
1680x1050  
1440x900  
1280x720  
1280x720  
1920x1035  
(Interlace)  
1920x1080  
(Interlace)  
1920x1080  
63.970  
65.350  
65.120  
65.290  
55.935  
45.000  
37.500  
60.190  
60.120  
59.900  
59.954  
59.887  
60.000  
50.000  
D-480p  
D-575p  
D-SVGA  
D-XGA  
720x575  
800x600  
1024x768  
1366x768  
1360x768  
1376x768  
1360x768  
1366x768  
1280x768  
1280x768  
1280x768  
1280x800  
1280x800  
1280x800  
1280x1024  
1280x1024  
D-WXGA 1  
D-WXGA 2  
D-WXGA 3  
D-WXGA 4  
D-WXGA 5  
D-WXGA 6  
D-WXGA 7  
D-WXGA 8  
D-WXGA 9  
D-WXGA 10  
D-WXGA 11  
D-SXGA 1  
D-SXGA 2  
D-720p  
D-1035i  
33.750  
33.750  
28.125  
60.000  
60.000  
50.000  
D-1080i  
(Interlace)  
1920x1080  
1920x1080  
1920x1080  
D-1080psf/30  
D-1080psf/25  
D-1080psf/24  
33.750  
28.125  
27.000  
60.000  
50.000  
48.000  
ꢀNote:  
s$EPENDING ON THE CONDITION OF SIGNALS AND THE TYPE AND LENGTH OF CABLESꢂ THESE SIGNALS MAY NOT BE PROPERLY VIEWEDꢁ  
s3PECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICEꢁ  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Technical Specifications  
Mechanical Information  
ProjectorType  
Multi-media Projector  
Dimensions (W x H x D)  
Net Weight  
20.87” x 10.53” x 29.8” (530 mm x 267.5 mm x 757 mm)  
60.85lbs (27.6 kg)  
0˚ to 2.8˚  
Feet Adjustment  
Panel Resolution  
LCD Panel System  
Panel Resolution  
1.8”TFT Active Matrix type, 3 panels  
1,024 x 768 dots  
Number of Pixels  
2,359,296 (1,024 x 768 x 3 panels)  
Signal Compatibility  
Color System  
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N  
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i  
H-sync. 15 kHz–120 kHz, V-sync. 48 Hz–120 Hz  
High DefinitionTV Signal  
Scanning Frequency  
Optical Information  
Projection Lamp  
330 W NSHA lamp x 2  
Interface  
Input 1  
DVI-DTerminal (Digital), Mini D-Sub 15-pinTerminal (Analog)  
BNCType x 5 (VIDEO/Y/G, B/Pb/Cb, R/Pr/Cr, H/HV and V), S-Video  
Input 2  
Other Jacks  
Serial port in (D-sub 9), Serial port out (D-sub 9), USB port, and Wired Remote Jack  
Power  
Voltage and Power Consumption  
AC 100–120 V (11.2A Max. Ampere), 50/60 Hz (The U.S.A and Canada)  
AC 200-240 V (5.1A Max. Ampere), 50/60 Hz (Continental Europe)  
Operating Environment  
OperatingTemperature  
StorageTemperature  
41˚F–104˚F (5˚C–40˚C)  
14˚F–140˚F (-10˚C–60˚C)  
Remote Control  
Battery  
AA or LR6Type x 2  
Operating Range  
Dimensions  
16.4’ (5 m/ 30˚)  
1.79” (W) x 1.03” (H) x 6.24” (D) (45.5 mm x 26.2 mm x 158.5 mm)  
4.1 oz (117 g) (including batteries)  
Net Weight  
Accessories  
Owner’s Manual (CD-ROM)  
Quick Reference Guide  
AC Power Cord  
Remote Control and Batteries  
VGA Cable  
PIN Code Label  
Lens Attachments (1 type) (For option lens)  
Light Block Plates (3 types) (For option lens)  
Spacer (For option lens)  
Real Color Manager Pro (CD-ROM)  
Mounting Clamp  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
L The specifications are subject to change without notice.  
L LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny  
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.  
L Each projector has its own characteristics.  
When projecting with several projectors on the same screen or side by side, you may recognize different white balance  
and color uniformity on each projector.  
Optional Parts  
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No.  
to the sales dealer.  
-ODEL .Oꢁ  
Optional Interface Board (DVI)  
: ꢌꢅꢆꢀꢌꢅꢄꢌꢅꢌꢀꢅꢌ  
: ꢆꢋꢀꢋꢅꢄꢏꢌꢍꢀꢅꢄ  
: ꢆꢋꢀꢋꢅꢄꢏꢌꢋꢀꢅꢈ  
: ꢆꢋꢀꢋꢅꢄꢏꢊꢅꢀꢅꢌ  
Optional Interface Board (5-BNC)  
Optional Interface Board (D-sub 15)  
Optional Interface Board (Dual-SDI)  
For a full list of Optional Interface Boards, please visit: www.ChristieDigital.com  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Configurations ofTerminals  
ANALOG (Mini D-sub 15 pin)  
Red Input  
Green Input  
Blue Input  
+5V Power  
Ground (Vert. sync.)  
Ground  
DDC Data  
Horiz. sync.  
Vert. sync.  
1
9
2
5
1
4
3
2
3
4
5
6
7
8
10  
11  
12  
13  
14  
15  
10  
9
8
7
6
15  
12  
11  
14  
13  
No Connect  
Ground (Horiz.sync.)  
Ground (Red)  
Ground (Green)  
Ground (Blue)  
DDC Clock  
DIGITAL DVI-D (DVI 24 PIN)  
T.M.D.S. Data2–  
T.M.D.S. Data2+  
T.M.D.S. Data2 Shield  
No Connect  
No Connect  
DDC Clock  
T.M.D.S. Data1–  
T.M.D.S. Data1+  
T.M.D.S. Data1 Shield  
No Connect  
No Connect  
+5V Power  
T.M.D.S. Data0–  
1
2
3
4
5
6
7
8
9
17  
18  
19  
20  
21  
22  
23  
24  
T.M.D.S. Data0+  
T.M.D.S. Data0 Shield  
No Connect  
10  
11  
12  
13  
14  
15  
16  
1
9
2
3
4
5
6
7
8
10 11 12 13 14 15 16  
17 18 19 20 21 22 23 24  
No Connect  
T.M.D.S. Clock Shield  
T.M.D.S. Clock+  
T.M.D.S. Clock–  
DDC Data  
No Connect  
Ground (for +5V)  
Hot Plug Detect  
USB CONNECTOR (Series B)  
1
2
3
4
Vcc  
- Data  
+ Data  
Ground  
2
3
1
4
CONTROL PORT CONNECTOR (D-sub 9 pin)  
Serial  
1
2
3
4
5
6
7
8
9
-----  
R X D  
T X D  
-----  
SG  
-----  
RTS  
CTS  
-----  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
PIN Code Number Memo  
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or  
lost the number and unable to operate the projector, contact the service station.  
PIN Code Lock No.  
Factory default set No: 1 2 3 4*  
Logo PIN Code Lock No.  
Factory default set No: 4 3 2 1*  
*Should the four-digit number be  
changed, the factory set number will  
be invalid.  
While the projector is locked with the PIN code...  
Put the label below (supplied) on in a prominent place of  
the projector’s body while it is locked with a PIN code.  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Dimensions  
Unit: inch (mm)  
Screw Holes for Ceiling Mount  
Screw: M8  
Depth: 0.393 (10.0)  
20.87(530)  
8.46(215)  
8.66(220)  
1.18(30)  
200.0  
234.0  
20.65(524.5)  
1.14(29)  
9.25(235)  
9.25(235)  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Americas  
USA  
Canada  
Chile  
Christie Digital Systems USA, Inc.  
10550 Camden Drive  
Cypress CA 90630  
Christie Digital Systems Canada, Inc.  
809 Wellington St. N.  
Kitchener, Ontario N2G 4Y7  
PH: 519-744-8005  
Representative Office  
Christie Digital Systems USA, Inc.  
Av. Pedro Fontova 7619 of 60  
Santiago  
PH: 714-236-8610  
FX: 714-503-3375  
Customer Service: 1-866-880-4462  
[email protected]  
FX: 519-749-3321  
Customer Service: 1-800-265-2171  
[email protected]  
PH: 56-2-721 11 75  
Mobile: 5699 436 6555  
Europe, Middle East & Africa  
United Kingdom  
France  
Germany  
Eastern Europe  
Branch Office  
Christie Digital Systems Canada, Inc.  
ViewPoint  
Representative Office  
Christie Digital Systems Canada, Inc.  
Bâtiment D-Hall 4  
Representative Office  
Christie Digital Systems Canada, Inc.  
Willicher Damm 129  
D-41066  
Representative Office  
Christie Digital Systems Canada, Inc.  
Regus Bank Centre  
Szabadsag ter 7.  
200 Ashville Way  
Parc Louis Roche  
Wokingham  
Berkshire, U.K.  
RG41 2PL  
PH: +44 (0) 118 977 8000  
FX: +44 (0) 118 977 8100  
[email protected]  
96/114 Avenue Louis Roche  
F-92230 Gennevilliers  
France  
PH: +33 (0)1 41 21 44 04  
FX: +33 (0)1 41 21 00 36  
[email protected]  
Mönchengladbach  
H-1054 Budapest  
Hungary  
PH: +36 (0)1 47 48 100  
FX: +36 (0)1 47 48 452  
[email protected]  
PH: +49 2161 664540  
FX: +49 2161 664546  
[email protected]  
Middle East  
Spain  
Italy  
Africa  
Representative Office  
Christie Digital Systems Canada, Inc.  
C/O Emirates Group Security  
Building,  
C Block, Room 207, 208, 209  
Airport Free Zone  
PO Box 293762  
Dubai, UAE  
PH: +971 (0) 4 299 7575  
FX: +971 (0) 4 299 8077  
Christie Authorized Reseller  
Antonio Abad  
Polígono Industrial Ventorro Del  
Cano  
Esquina C/ Aldea del Fresno, 3  
3ª Puerta. Izqda  
28925 Alcorcón, Madrid  
PH: + 34 91 633 9990  
FX: + 34 91 633 9991  
Christie Authorized Reseller  
AngeloTacca  
Via Garibaldi, 88  
20024 Garbagnate Milanese (MI)  
PH: +39 02 9902 1161  
FX: +39 02 9902 2641  
Representative Office  
Christie Digital Systems Canada, Inc.  
4 Patricia Road  
Gillitts  
KwaZulu Natal  
3610  
Republic of South Africa  
PH: +27 (0) 317 671 347  
FX: +27 (0) 317 671 347  
MB: +27 (0) 823 045 442  
Asia Pacific  
Singapore  
China - Beijing  
China - Shanghai  
Branch Office  
Representative Office  
Christie Digital Systems USA, Inc.  
7B15, Hanwei Plaza  
Guanghua Road  
Representative Office  
Christie Digital Systems USA, Inc.  
627A Aljunied Road  
# 05-02 BizTech Centre  
Singapore, 389842  
Christie Digital Systems USA, Inc.  
Room 1109--1116 Shartex Plaza  
No. 88 ZunYi South Road  
Shanghai 200336  
Chaoyang District,  
PH: +65 6877-8737  
FX: +65 6877-8747  
[email protected]  
Beijing, 100004  
PH: +86 21 6278 7708  
FX: +86 21 6278 5816  
[email protected]  
PH: +86 10 6561 0240  
FX: +86 10 6561 0546  
[email protected]  
Japan  
South Korea  
India  
Representative Office  
Christie Digital Systems USA, Inc.  
A-bldg., 2nd Floor  
Ariake Frontier Building  
3-1-25, Ariake, Koto-ku  
Tokyo, 135-0063  
PH: 81-3-3599-7481  
FX: 81-3-3599-7482  
[email protected]  
Representative Office  
Christie Digital Systems USA, Inc.  
6F, ILSIN Building, 15-15  
Yeouido-dong,  
Yeongdeungpo-gu, Seoul,  
150-872 South Korea  
PH:+82 2 702 1601  
FX: +82 2 702 1602  
Representative Office  
Christie Digital Systems USA, Inc.  
Unit No. 03, Navigator Building  
InternationalTechnology Park  
Whitefield Road  
Bangalore 560 066  
India  
PH: (080) 41468941 – 48  
FX: (080) 41468949  
KW7K  
LX1000 User Manual  
020-000141-01 Rev. 1 (05-2009)  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bogen Stereo Amplifier X300 User Manual
Bose Home Theater System AM320927 User Manual
Breville Blender BBL910XL User Manual
Briggs Stratton Automobile Parts WI User Manual
Brother Fax Machine FAX 275 User Manual
Cadence Stereo Equalizer CEQ 600 User Manual
Canon Calculator MP18DII User Manual
Canon Projector LV 7295 User Manual
Chicago Electric Microscope Magnifier 97448 User Manual
Cisco Systems Film Camera OL 29225 01 User Manual