Chief Manufacturing Indoor Furnishings DGP32 User Manual

I N S T A L L A T I O N I N S T R U C T I O N S  
DISPLAY COVER ACCESSORY  
DGP32, 42, 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
DGP32, 42, 50  
DIMENSIONS  
DGP42  
Measurements in: inches [millimeters]  
DGP50  
Measurements in: inches [millimeters]  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DGP32, 42, 50  
Installation Instructions  
LEGEND  
Open-Ended Wrench  
Llave de boca  
Gabelschlüssel  
Chave de bocas  
Chiave a punte aperte  
Steeksleutel  
Clé à fourche  
TOOLS REQUIRED FOR INSTALLATION  
7/16" (11.11 mm)  
PARTS  
(A)  
A (1) - Display Cover with support brackets  
B (8) - Bolt assemblies  
C (4) - Clamp bracket  
(C)  
D (8) - Flange nuts  
(B)  
(D)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
DGP32, 42, 50  
Top of Cover:  
Base of bolts  
engaged in  
Assembly And Installation  
slot notches  
CAUTION: Overheating may cause damage or display  
failure. Use correct size display cover to allow air circulation  
around and behind display to prevent overheating.  
NOTE: Access to back of display is necessary for installation  
Sides/Bottom of Cover:  
Base of bolts parallel  
to slots  
of DGP display cover.  
Adjusting Display Cover Size  
1. Measure height and width of display.  
2. Loosen and remove flange nuts (D) and padded tubes on  
bolt assemblies (B). (See Figure 1)  
(B)  
Figure 2  
4. Position bolts and tighten the flange nuts securely against  
the padded tubes. (See Figure 1)  
5. Place cover on display.  
NOTE: Sponge bumpers and padded bolts may be used to  
prevent scratches on display.  
Slot  
6. Check display alignment and adjust as necessary.  
7. Install clamp brackets (C) over the bolt ends (B). (See  
Figure 3)  
(D)  
Padded  
Tube  
(B)  
(D) x 4  
Figure 1  
(C)  
3. Adjust and position bolts (B) into the slots which provide the  
correct spacing.  
NOTE: Engage base of bolts at top of cover in the slot notches.  
Base of bolts on sides and bottom of cover should be  
parallel to the slots. (See Figure 2)  
Figure 3  
8. Secure with flange nuts (D).  
NOTE: Clamps may be rotated to best fit cover to display.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
DGP32, 42, 50  
Installation Instructions  
USA/International  
Europe  
A
P
F
A
P
F
8401 Eagle Creek Parkway, Savage, MN 55378  
800.582.6480 / 952.894.6280  
877.894.6918 / 952.894.6918  
Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands  
+31 (0)40 2668620  
+31 (0)40 2668615  
Asia Pacific  
A
Room 30I, Block D, Lily YinDu International Building  
LuoGang, BuJi Town, Shenzhen, CHINA. Post Code: 518112  
8831-000014  
¤2007 Chief Manufacturing  
03/07  
P
F
+86-755-8996 9226 ; 8996 9236 ; 8996 9220  
+86-755-8996 9217  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Battery Charger F8E490EA User Manual
Belkin Network Router F9K1107au 8820au00920 Rev A00 User Manual
Black Box Computer Accessories 26681 User Manual
Bogen Wireless Office Headset BBF User Manual
Bostitch Nail Gun N58C User Manual
Bowers Wilkins Speaker DM603 S2 User Manual
Brocade Communications Systems Network Card 53 1002163 02 User Manual
Bushnell Telescope 78 9470 User Manual
Casio Digital Camera EX Z110 User Manual
Christie Digital Systems Projector 38 VIV301 01 User Manual