Congratulations on your purchase of a Chevrolet TrailBlazer. Please read this information and
your Owner Manual to ensure an outstanding ownership experience. Note that your vehicle may
not include all the features described in this booklet. Place this booklet in your Owner Manual
portfolio for easy reference.
Instrument Panel . . . . . . . . . . . . . . . . . . . . . . . . .2
Instrument Panel Cluster . . . . . . . . . . . . . . . . . .3
Malfunction Indicator Lamp . . . . . . . . . . . . . . . .4
Driver Information Center . . . . . . . . . . . . . . . . . .4
Programmable Automatic Door Locks . . . . . . . .5
Remote Lock/Unlock Feedback . . . . . . . . . . . . .6
Headlamp Controls and Washer . . . . . . . . . . . . .6
Automatic Lamp Control . . . . . . . . . . . . . . . . . .7
Dome Lamp Override . . . . . . . . . . . . . . . . . . . . .7
Manual Dual Climate Control . . . . . . . . . . . . . . .8
Automatic Dual Climate Control . . . . . . . . . . . . .8
Outside Rearview Mirrors . . . . . . . . . . . . . . . . . .9
Electric Adjustable Pedals . . . . . . . . . . . . . . . . .9
Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Memory Seats . . . . . . . . . . . . . . . . . . . . . . . . . .10
AM/FM Stereo with Cassette/CD and RDS . . . .10
AM/FM Stereo with Six-Disc CD . . . . . . . . . . . .12
Navigation Radio . . . . . . . . . . . . . . . . . . . . . . . .12
Travel Note Recorder . . . . . . . . . . . . . . . . . . . .13
Universal Transmitter . . . . . . . . . . . . . . . . . . . .14
Rainsense Wipers . . . . . . . . . . . . . . . . . . . . . . .14
Remote Keyless Entry System . . . . . . . . . . . . .15
Content Theft-Deterrent System . . . . . . . . . . . .15
Sun Visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Four-Wheel Drive . . . . . . . . . . . . . . . . . . . . . . .17
Traction Assist System (TAS) . . . . . . . . . . . . .17
Luggage Carrier . . . . . . . . . . . . . . . . . . . . . . . .18
Roadside Assistance Program . . . . . . . . . . . . .20
My GMLink . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Getting to Know Your TrailBlazer
Reset trip odometers to zero
Malfunction Indicator Lamp
(Service Engine Soon Lamp)
• Press the reset stem located on the
DIC cluster or use the reset button
on the steering wheel.
Located in the instrument panel, this
lamp illuminates under a variety of con-
ditions when the On-Board Diagnostics
II (OBD II) system detects a malfunction
in the vehicle’s emission controls. If it is
lit steadily, check the gas cap to ensure
that it is present and securely fastened.
Turn it clockwise until a “ratcheting”
sound is heard, signaling that it is
secure. If this is the cause of the condi-
tion, and the cap is installed properly,
this should turn the light off.
Access fuel information
See Section 3 of your Owner Manual.
• Press to view range, average fuel
economy, instant fuel economy and
the GM Oil Life SystemTM status.
Driver Information Center (DIC)
(if equipped)
Reset fuel information
• Press the reset stem located on the
DIC cluster.
The DIC display is located above the
steering wheel on the instrument cluster,
and can be programmed in three lan-
guages. The controls are located on the
steering wheel:
Personalize vehicle settings
Up to two people can program
individualized settings.
Access trip information
• Press
once and current-driver
• Press
to access each of the
preferences will be displayed. Any
changes made at this time affect only
the displayed driver.
odometer, TRIP A, TRIP B and
TIMER functions.
• Press the button again to scroll
through and personalize menu
features.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Use Reset button
Programmable Automatic
Door Locks
• When you find the choice you want,
press
to select it and move on to
Your vehicle features an automatic door
lock/unlock feature with a choice of four
features, as well as automatic door lock-
out prevention to prevent locking the
keys in the vehicle. In the event the
power door lock switch is activated
when a door is open and the key is in
the ignition, the driver door will unlock.
the next feature.
Reset all personalization features to
their default settings
• Press and hold the Trip Information
button and the Personalization button
down for four seconds.
Recall driver preferences
Locking Options: The default setting
for the programmable automatic door
locks is to lock automatically when the
transmission is shifted into gear. Other
locking options include:
Mode 1: All doors lock when the trans-
mission is shifted into gear
Mode 2: All doors lock when vehicle
speed is over 8 mph (13 kph)
Mode 3: No automatic door locking
Unlocking options: Choose one of the
following options before personalizing
your unlocking preference:
Mode 1: Driver’s door unlocks when the
transmission is placed into PARK
Mode 2: All doors unlock when the
transmission is shifted into PARK
Mode 3: All doors unlock when the key
is removed from the ignition
• Press any button on the Remote
Keyless Entry System transmitter or
press Memory button #1 or #2 on the
driver’s door.
Available Personalization Features
Depending on the equipment ordered
on your vehicle, you could personalize a
wide variety of preferences on the DIC.
Only the features included on your vehi-
cle will be displayed by the DIC.
Personalization features can include:
• Alarm Warning Type
• Automatic Locking and Unlocking
• Seat Position Recall
• Perimeter Lighting
• Remote Lock and Unlock Feedback
• Headlamps On at Exit
• Mirror Curb View Assist
• Easy Exit Driver Seat
Mode 4: No automatic door unlock
• Display Units (English/Metric)
• Display Language
See Section 3 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Getting to Know Your TrailBlazer
Select and program functions
(if vehicle is equipped with a Driver
Information Center)
Remote Lock/Unlock Feedback
(if equipped)
Program Remote Keyless Entry
System lock/unlock feedback (horn,
parking lamps, both or neither)
• Press the Personalization button on
your steering wheel until REMOTE
LOCK FEEDBACK (or unlock, as
desired) appears on the display.
• Press the personalization button on
the Driver Information Center until
AUTOMATIC LOCKING appears on
the display. Press the Select button
until the desired setting appears on
the display and press the
Personalization button to select it.
Select and program functions if not
equipped with DIC
• With ignition OFF, pull the turn
signal/multifunction stalk toward you
and hold it there while performing the
next step.
• Press the Select button to scroll
through the menu of choices. To
program the lock/unlock feedback
feature, press the Personalization
button when the desired menu option
is displayed.
See Section 3 of your Owner Manual.
• Turn the ignition key to RUN and
LOCK twice, ending in the LOCK
position, and release the turn signal
stalk; the lock switch locks/unlocks,
the horn chirps twice and a 30-sec-
ond timer begins.
Headlamp Controls and Washer
• To cycle through the locking/unlock-
ing choices, press the power door
lock switch to the LOCK position to
set locking preference and the
UNLOCK position to set unlocking
preference.
• When the lock switch locks/unlocks
and the horn chirps twice, you have
left programming mode; if more time
is needed, repeat the process above.
• To exit the program mode manually,
turn the ignition key to RUN.
The exterior lamps knob is located on
the instrument panel to the left of the
steering wheel.
Activate the automatic headlamp
system that illuminates all exterior
lamps and the instrument panel/radio
lights when needed
See Section 2 of your Owner Manual.
• Turn the knob clockwise to the first
position.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Manually illuminate all exterior
tail/marker lamps and the instrument
panel/radio lights
Dome Lamp Override
• Turn the knob to the next position.
Activate the headlamps, all exterior
tail/marker lamps and the instrument
panel/radio lights
• Turn the knob to the final clockwise
position.
A
Activate the headlamp washers (if
equipped)
• Press the headlamp washer button
located adjacent to the headlamp
switch.
See Section 3 of your Owner Manual.
Disable the dome lamps when a door
is opened
• Press the dome lamp override button
(see “A” above) located below the
exterior lamps knob.
The button also disables entry lighting
until it is pushed again or the remote
keyless entry transmitter is used to
unlock the vehicle.
Automatic Lamp Control
During daytime driving, Automatic Lamp
Control (ALC) may temporarily switch
the headlamp and interior light systems,
including the radio display, to the night-
time mode. This occurs when passing
through darker conditions, such as
under a bridge or overpass, or inside a
parking garage. When you start the
vehicle at night, the automatic head-
lamps will come on immediately. The
ALC light sensor is located on top of the
instrument panel. To ensure proper sys-
tem operation, avoid placing objects or
stickers on or near the sensor.
See Section 3 of your Owner Manual.
See Section 3 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Getting to Know Your TrailBlazer
View current driver’s set temperature,
automatic air delivery mode and fan
speed
Manual Dual Climate Control
• Press the AUTO button again.
Memory Feature (if equipped)
Up to two drivers can store preferred
climate control settings for temperature,
air delivery mode and fan speed. On
vehicles equipped with the Remote
Keyless Entry (RKE) System, the key-
less transmitter identifies the driver to
the system when the key fob transmitter
is used, and the automatic climate con-
trol system adjusts to the last comfort
control setting saved by that driver when
the ignition key is placed in the RUN
position.
To cool the vehicle interior more quickly
on very hot days, open the windows just
long enough to let the hot air escape.
Choose maximum cooling
• Press the RECIRCULATE(
) and
A/C buttons on the instrument panel
and place the mode knob in the
VENT ( ) mode.
Rear Seat Controls (if equipped)
Rear seat comfort controls are located
on the rear seat audio system display.
When the front seat MODE button is set
to Defrost, the rear controls do not
function.
Seven-passenger models have inde-
pendent rear temperature and fan
controls.
On TrailBlazer EXT models, when sec-
ond seat passengers select a fan speed
mode, the mode will mimic the front seat
fan speed and the passenger side tem-
perature setting.
The driver and front passenger can
adjust the dual zone temperature con-
trols to individual comfort levels. The
front passenger-side control also con-
trols rear passenger temperature output
levels.
See Section 3 of your Owner Manual.
Automatic Dual Climate Control
(if equipped)
Note: In order for the second seat
climate controls to function, the front
climate control switch must be in the
“R” mode.
See Section 3 of your Owner Manual.
Set automatic mode
• Press the AUTO button to set auto-
matic air delivery mode, fan speed,
A/C and recirculation functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Outside Rearview Mirrors
Adjust manual mirrors
Electric Adjustable Pedals
(if equipped)
• Adjust by hand until you can see a lit-
tle of the side of your vehicle. Pull
the mirrors toward the vehicle before
entering a car wash to fold them to
the vehicle side and unfold them after
exiting.
Adjust brake and accelerator pedals
to a comfortable setting
• Operate the pedal adjustment switch
located on the steering column.
Adjust power mirrors (if equipped)
Note: The pedals cannot be positioned
farther away from the driver than they
are in their standard position. This fea-
ture can be programmed to work with
the memory function (if equipped) on
your vehicle. Adjustment of the powered
pedals requires that the vehicle be in
park and the key be out of the ignition.
• Twist the control knob toward the mir-
ror you want to adjust, move the knob
in the direction you want the mirror to
go, and, when both mirrors have
been adjusted, twist the control knob
to the center position.
Heated Mirrors (if equipped)
See Section 2 of your Owner Manual.
When you turn on the rear window
defogger, a defogger also warms the
outside mirrors to clear them of mist, ice
and snow.
Curb View Assist (if equipped)
With this feature, one or both mirrors
automatically adjust downward to a pre-
set tilt position when the vehicle is in
REVERSE gear. The mirrors move to
their normal position when the vehicle is
moved out of REVERSE. See your
Owner Manual to activate the system for
the first time.
See Section 2 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Getting to Know Your TrailBlazer
The memory seat controls are located
Heated Seats (if equipped)
on the driver door. They program and
recall driver seat position and outside
mirror settings for up to two drivers.
Store the driver seat and mirror
settings
• Adjust the seat and outside mirrors to
the desired position.
• Press and hold memory button #1 for
three seconds until a chime sounds
to indicate that the seat position is
now stored.
Repeat the sequence using memory
button #2 for a second driver.
Activate heat for the seatback only
• Press the vertical switch located on
the front door armrest until the switch
light indicates the desired setting.
See Section 2 of your Owner Manual.
Activate heat for seatback and seat
cushion
• Press the horizontal switch located on
the front door armrest until the switch
light indicates the desired setting.
AM/FM Stereo with Cassette/
CD and RDS (if equipped)
Note: The engine must be running for
the heated seat feature to work.
See Section 1 of your Owner Manual.
Memory Seats (if equipped)
Set the automatic volume (AUTO
VOL) feature
• Set the volume at the desired level.
• Press the AUTO VOL button and
select LOW, MEDIUM or HIGH.
(Each higher setting will allow for
more volume compensation at faster
vehicle speeds.)
• Select OFF if you prefer not to use
AUTO VOL.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Set the Clock
Toggle between the station frequen-
cy, station name, PTY and the name
of the program if available
• Press and hold the HR button until
the correct hour appears. AM or PM
will appear on the radio display.
• Press DISP.
• Press and hold MN until the correct
minute appears.
Activate the Radio Data System traf-
fic announcement feature
Set the time to the time of an FM
• Press TRAF. <TRAF> will appear on
the display if the tuned station broad-
casts traffic announcements.
• If the tuned station does not broad-
cast traffic announcements, the radio
will seek a station that does.
station broadcasting RDS information
• Press/hold HR and MN simultaneous-
ly for two seconds until UPDATED
and the clock symbol appear on the
display. If the time is not available
from the station, NO UPDAT will
appear.
• If no station is found, NO TRAF
appears on the display.
Program radio station presets
• Turn the radio on.
Display a station’s INFO message
when INFO appears on the display
• Press AM-FM to select the band
(AM, FM1 or FM2).
• Tune to the desired station using the
seek function or tune knob.
• Press INFO to see the message.
Once the complete message has
been displayed, INFO disappears
from the display.
Tune to an RDS broadcast of a
selected program type
• Turn the P-TYPE knob to select the
Program Type you want to listen to.
• Press AUTO EQ or AUTO TONE
(as applies to your radio) to select the
sound equalization best suiting the
type of station selected.
• Press/hold a numbered button until a
beep confirms storage of the station.
• Press the SEEK or SEEK TYPE but-
ton (as applies to your radio).
• Repeat the previous steps for each
pushbutton.
Switch to a station with a stronger
signal and of the same PTY
Radio Data System
Your radio’s RDS mode allows you to:
• Seek only stations with your preferred
programming type
• Press and hold the AM-FM button for
two seconds to turn it on; repeat to
turn it off.
Hear an ALERT announcement
“ALERT!” will appear in the display
when a local or national emergency
announcement occurs. If a CD or cas-
sette tape is playing, the announcement
overrides it.
• Seek to stations with traffic
announcements
• Receive announcements of local
and/or national emergencies
• Receive and display messages from
radio stations
See Section 3 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Getting to Know Your TrailBlazer
AM/FM Stereo with Six-Disc CD
(if equipped)
Navigation Radio (if equipped)
Load one CD into the six-disc CD
player
• Turn the ignition on, then press and
release the LOAD side of the LOAD
CD button.
• Wait for the green indicator light at
the right side of the slot to turn green.
• Insert the disc partway into the slot,
label side up; the player will pull the
disc in.
Set a station preset
• Turn the radio on by pressing the
VOL (power) button.
• Push the BAND button to select a
desired band.
• Use either the control pad or SEEK
rocker to tune a station.
• Press and hold one of the six buttons
on the right side of the radio until you
hear a beep or see the station dis-
played next to the button pushed.
Load multiple CDs into the six-disc
CD player
• Turn the ignition on, then press and
hold the LOAD button for two sec-
onds. The unit beeps and the light to
the right of the slot begins to flash.
• When the light stops flashing and
turns green, insert a disc partway,
label side up.
• The indicator light will begin blinking
and turn green. Load another disc at
this time.
• When more than one disc is loaded,
a number for each disc is displayed.
• To load more than one but fewer than
six discs, press the LOAD button
again after loading the final CD.
• For every CD loaded, a number
appears on the radio display.
• To play a specific CD, press the CD
AUX button, and then the number of
the CD you want to hear.
• A small bar appears under the CD
number that is playing, and the track
number appears.
See Section 3 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Set your geographical area and
destination
Travel Note Recorder
(if equipped)
• Turn the radio on by pressing the
VOL (power) button.
• Insert a map disc into the radio CD
slot.
• If a notice appears, use the control
pad to enter the highlighted NEXT
box by pushing the control pad.
• Push the DEST key.
Continue using the control pad for the
following steps:
• Highlight and enter the CHANGE box
on the right.
The Travel Note Recorder enables you
to record a message and play it back
later. The controls are located in the
overhead console.
• Determine whether your geographical
area is selected. If it is not,
Record a message
• Press the button marked with a circle
and begin speaking.
select/enter your area.
• Select/enter the ADDRESS box.
• Press the button again to stop
recording.
• Select/enter the name of your street.
(Note: Use the “Back” arrow to cor-
rect any misspellings.)
Listen to a message
• If provided a list of streets, select
your street.
• Enter the street address.
• If provided a list of cities, select/enter
the proper one.
• Press the ADD button.
The system now calculates the fastest
route. Either press the map button in the
upper-right or use the control pad to
view/select alternate routes.
• Press the button with a right arrow
designation.
• Press the button again until reaching
the desired message. To hear all
messages, press and hold the button
for more than one second.
Delete a message
• Press the button designated with a
square while the message is playing.
Delete all messages
See Section 3 of your Owner Manual.
• Press and hold the right arrow button
and the circle button simultaneously
for half a second.
See Section 2 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Getting to Know Your TrailBlazer
For garage door openers with a “rolling
code,” continue with the following steps:
Universal Transmitter
(if equipped)
• Press the training button on the
garage door opener motor head unit,
making sure that the indicator light
flashes to confirm training mode.
• Within 30 seconds, press and hold
the HomeLink® transmitter button pro-
grammed in the previous steps.
• Press and release this button up to
three times to ensure that the
HomeLink® transmitter has been
trained.
This programmable transmitter can store
three frequencies for items such as a
garage door opener, entry door lock or
security system.
See Section 2 of your Owner Manual.
Rainsense Wipers (if equipped)
With the ignition off, program the
transmitter as follows
• Hold down the desired button on the
unit until the red indicator light flashes
slowly (about 20 seconds); continue
holding down the button.
These wipers detect moisture on the
windshield and automatically turn the
wipers on.
Activate Rainsense Wipers
• Set the wipers to one of the five delay
settings on the turn signal/multifunc-
tion lever. The rain sensor automati-
cally controls the frequency of the
wipes from OFF to HIGH speed
according to the amount of moisture
on the windshield.
• Hold the end of your hand-held trans-
mitter up to three inches away from
the surface of the universal transmit-
ter and hold down the button.
• Up to 90 seconds may pass as the
universal transmitter is being pro-
grammed; programming is complete
when the red light on the HomeLink®
transmitter flashes rapidly.
Note: Turn this feature off before enter-
ing an automatic car wash.
• Release both buttons.
See Section 3 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Remote Keyless Entry System
(if equipped)
Content Theft-Deterrent System
(if equipped)
This feature has a red indicator lamp to
the left of the steering wheel that is
labeled SECURITY.
After closing all vehicle doors, the sys-
tem can be activated in two ways:
• Press the LOCK button on the
Remote Keyless Entry key fob, or
• Press the power door LOCK switch
with the door open.
The alarm is not armed until the
SECURITY light turns off (after a delay
of approximately 30 seconds).
If the alarm is tripped, the horn sounds
for 30 seconds, and the headlamps and
parking lamps also flash for two minutes
to get visual attention. The alarm sounds
whenever a locked door is opened with-
out the key or Remote Keyless Entry
System transmitter.
On equipped vehicles, the RKE system
locks and unlocks the doors and liftglass
from a range of three to 30 feet. At times
the range may be shorter than usual,
which is normal. If the transmitter does
not seem to be working properly:
• Ensure that you are within transmitter
range of the vehicle. Rainy and
snowy weather can reduce transmit-
ter range.
See Section 2 of your Owner Manual.
• Check to see whether other
vehicles or obstacles are blocking the
transmitter signal by stepping a few
feet to the left or right, and hold the
transmitter higher when pressing the
button(s).
• Consider the length of time that
the transmitter battery has been in
service and replace it if necessary
(the DIC will display “RFA BAT #
LOW” if the battery needs replacing).
Use CR 2032 battery or equivalent.
See Section 2 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Getting to Know Your TrailBlazer
Sun Visors
Sunroof (if equipped)
To open or close your sunroof, the igni-
tion must be on or Retained Accessory
Power (RAP) must be active.
Open the sunroof
• Press and release the back of the
button in the overhead console.
Close the sunroof
To block the sun’s glare, pull the sun
visor down. You can cover the driver or
passenger front-side window by sliding
the sun visor front-to-rear of vehicle and
vice versa.
• Press (and hold) the front of the
button. Once the sunroof is closed,
press the forward side of the button
to open the sunroof to the vent
position.
The visor can also slide along the
attachment bar for additional window
coverage.
Note: In the closed position, the sunroof
may not appear parallel with the vehicle
headliner.
See Section 2 of your Owner Manual.
See Section 2 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Four-Wheel Drive (if equipped)
Traction Assist System (TAS)
(if equipped; 2WD models only)
TAS operates only when it senses that
one or both rear wheels are beginning to
lose traction. When this happens,
engine power is reduced to limit wheel-
spin. You may also hear or feel the
system working.
TAS is automatically enabled whenever
you start the vehicle.
Disable TAS
The Four-Wheel Drive system rotary
controls are located on the instrument
panel and include these modes:
2HI: For most street and highway
conditions
A4WD: For use when road
conditions vary
4HI: When extra traction is required for
driving on snow-covered roads and for
most off-road conditions
• Press the TAS ON/OFF button
located near the shift lever or on the
instrument panel. When disabled, the
TRACTION OFF light comes on.
Enable TAS after having turned it off
• Press the TAS ON/OFF button again
and the TRACTION OFF light will go
out.
See Section 4 of your Owner Manual.
4LO: For extreme driving conditions
only, including steep hills, deep sand,
snow or mud
See your Owner Manual for instructions
on how to place the transfer case in
neutral.
See Section 2 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Getting to Know Your TrailBlazer
Luggage Carrier (if equipped)
Note: Never carry anything on the
vehicle roof that is longer or wider than
the luggage carrier itself. (Examples:
plywood, paneling, a mattress.) The
load could be violently torn off, causing
you or other drivers to have a collision.
Note: Loading cargo that weighs more
than 220 pounds (100 kg) on the lug-
gage carrier may damage your vehicle.
Your vehicle’s luggage carrier has side
rails attached to the roof and allows you
to carry a load on top of your vehicle.
Some TrailBlazers are equipped with
optional sliding crossrails and tie-down
spots to secure cargo.
Adjust crossrails
• Lift the lever on each side of the
crossrail and slide it into position.
• Secure the crossrail by pressing the
levers on each side of the crossrail
down into place.
Reduce wind noise when the luggage
carrier is not in use
Position the rear crossrail at the rear-
most position and the front crossrail
above the rearmost portion of the rear
door opening (above the “C”-pillar).
See Section 2 of your Owner Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Notes
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Getting to Know Your TrailBlazer
•
•
•
•
FREE Locksmith/Key Service (when
Roadside Assistance Program
keys are lost on the road or locked inside)
FREE Flat Tire Service
(spare installed on the road)
FREE Jump Start
(at home or on the road)
FREE Fuel Delivery
($5 of fuel delivered on the road)
1-800-CHEV-USA
(1-800-243-8872)
TTY Users: 1-888-889-2438
As the owner of a 2004 Chevrolet, member-
ship in the Roadside Assistance Program
is free.
Courtesy Care is available to retail and
retail lease customers operating 2004 and
newer Chevrolet vehicles for a period of
3 years/36,000 miles (60,000 km), which-
ever occurs first.
For prompt and efficient assistance when
calling, please provide the following infor-
mation to the advisor:
Roadside Assistance is available 24 hours
a day, 365 days a year by calling one of the
above numbers. An advisor will provide you
with over-the-phone roadside assistance
with minor mechanical problems. If the
problem can’t be resolved over the phone,
our advisors have access to a nationwide
network of dealer-recommended service
providers. Roadside membership is free;
however, some services may incur costs.
•
•
•
•
•
Vehicle Identification Number (VIN)
Vehicle license plate number
Vehicle color and mileage
Location of the vehicle
Telephone number where you can be
reached
Roadside offers two levels of service:
Basic Care and Courtesy Care.
Roadside Basic Care provides:
•
•
•
•
Toll-free number (shown above)
Free towing for warranty repairs
Basic over-the-phone technical advice
•
Description of problem
Available dealer services at reasonable
My GMLink
costs (i.e., wrecker services,
locksmith/key service, glass repair)
The Chevrolet Owner Center at MyGMLink
is a complimentary service for Chevrolet
Owners, a one-stop resource to enhance
your Chevrolet ownership experience.
Exclusive member benefits include online
service reminders, vehicle maintenance
tips, online owner manual, special
privileges and more. Sign up today at
Roadside Courtesy Care provides:
•
Roadside Basic Care services
(as outlined previously)
Plus:
FREE Non-Warranty Towing (to the
closest dealer from a legal roadway)
•
Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner
Manual for complete instructions. All information contained herein is based on information available at
the time of printing and is subject to change without notice. Copyright 2003 by GM Corp.
All rights reserved.
04TBZRQRG
Download from Www.Somanuals.com. All Manuals Search And Download.
|