User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
1. BEFORE YOU BEGIN
1 x Mini 4 Bar™ 2.0
2 x Hanging Brackets with mounting
hardware
What is
Included
1 x Carrying Bag
1 x Tripod
1 x Power Cord
1 x Warranty Card
1 x Tripod Carrying Bag
1 x Footswitch
1 x Quick Reference Guide
Unpacking Immediately upon receipt, carefully unpack this product and check the container to make
sure you have received all the parts indicated above in good condition.
Instructions
If the container or the material inside the container (this product and any other accessory
Claims
included) appears damaged from shipping, or shows signs of mishandling, notify the
carrier immediately, not CHAUVET®, upon receipt of the damaged merchandise. Failure
to do so in a timely manner may invalidate your claim with the carrier. In addition, retain
the container and all the packing material for inspection.
For other issues such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET® within seven (7) days of receiving
the merchandise.
Convention
1~512
Meaning
Text
Conventions
A range of values
50/60
A set of values of which only one can be chosen
A menu option not to be modified
Settings
Menu > Settings A sequence of menu options to be followed
<ENTER>
ON
A key to be pressed on the product’s control panel
A value to be entered or selected
Icon
Meaning
Icons
This paragraph contains critical installation, configuration, or
operation information. Failure to comply with this information may
render the product partially or completely inoperative, cause
damage to the product, or cause harm to the user.
This paragraph contains important installation or configuration
information. Failure to comply with this information may prevent
the product from functioning correctly.
This paragraph reminds you of useful, although not critical,
information.
The information and specifications contained in this document are subject to change
without notice. CHAUVET® assumes no responsibility or liability for any errors or
omissions that may appear in this manual. CHAUVET® reserves the right to update the
existing document or to create a new document to correct any errors or omissions.
Document
Information
© Copyright 2011 CHAUVET®. All rights reserved
Printed in P.R.C.
Electronically published by CHAUVET® in the United States of America
Author
Editor
Specialist
Manager
A. Diaz
B. Pillow
R. Jones
A. Reiss
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 3 of 18
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Auto Programs
Product at a
Glance
Auto-ranging Power Supply
Replaceable Fuse
User Serviceable
Duty Cycle
Master/Slave
Please read the following Safety Notes carefully before working with this product. They
include important safety information about its installation, usage, and maintenance.
Safety Notes
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Always disconnect this product from the power source before cleaning it or replacing
the fuse.
Avoid direct eye exposure to the light source while the product is on.
Make sure the power cord is not crimped or damaged.
Never disconnect this product from power cord by pulling or tugging on the cord.
If mounting this product overhead, always secure it to a fastening device using a
safety cable.
Make sure there are no flammable materials close to the unit while operating.
Do not touch this product’s housing when operating because it may be very hot.
Always make sure that the voltage of the outlet to which you are connecting this
product is within the range stated on the decal or rear panel of the product.
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose this product to rain or moisture.
Always install this product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
Be sure that no ventilation slots on the unit’s housing are blocked.
Never connect this product to a dimmer.
Make sure to replace the fuse with another of the same type and rating.
Never carry this product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at higher temperatures.
In the event of a serious operating problem, stop using the unit immediately.
Never try to repair this product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
Keep this User Manual for future consultation. If you sell this product to another user,
be sure that they also receive this document.
Page 4 of 18
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INTRODUCTION
Product Overview
Power Out
Power In
LED Display
DMXIn/Out
Footswitch Input
Microphone
Microphone Sensitivity Knob
Product Dimensions
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Page 5 of 18
Download from Www.Somanuals.com. All Manuals Search And Download.
3. SETUP
This product has an auto-ranging power supply and it can work with an input voltage
range of 100~240 VAC, 50/60 Hz.
AC Power
To determine the power requirements for this product (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or
refer to the product’s specifications chart. The listed current rating indicates the
product’s average current draw under normal conditions.
Always connect this product to a protected circuit (circuit breaker or fuse),
making sure that it has an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Fuse
Replacement
Follow the instructions below to change the fuse, if necessary.
Disconnect this product from the power outlet before replacing the fuse.
1. Wedge the tip of a flat head screwdriver into the slot of the fuse holder and pry
out of its housing.
2. Remove the blown fuse from its holder and replace with a fuse of the exact
same type and rating.
3. Insert the fuse holder back into place, and reconnect power.
Installed fuse
(held by plastic clip)
Safety cap
Spare fuse holder
(inside safety cap)
Although the safety cap does have room for a spare fuse, this product ships with
no spare fuse.
Always replace a blown fuse of the same type and rating.
Page 6 of 18
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
This product provides power linking via the Edison outlet located in the back of the unit.
Please see the diagram below for further explanation.
Power Linking
1st Product
Power Linking Diagram
2nd Product
3rd Product
Other products
You can power link up to 18 Mini 4 Bar™ 2.0 units on 120 VAC or up to 32 Mini 4
Bar™ 2.0 units on 230 VAC.
The power linking diagram shown above corresponds to the North American
version of this product ONLY! If using this product in other markets, you must
consult with the local CHAUVET® distributor as power linking connectors and
requirements may differ in your country or region.
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 7 of 18
Before mounting this product, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
Mounting
Orientation
Rigging
The Mini 4 Bar™ 2.0 may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
This product has multiple rigging options. They are as follows:
Floor Standing (using the two mounting/standing brackets)
Hanging (using the two mounting/standing brackets)
Hanging (using the two hanging clamp Mounting points)
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product can support its
weight. Please see the Technical Specifications section of this manual for weight
information.
When mounting this product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss. The bracket has a
13 mm hole, which is appropriate for this purpose.
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity.
When power linking multiple products, you must always consider the length of the power
linking cable and mount the products close enough for the cable to reach.
Pod pan
adjustment (x4)
Pod tilt
adjustment (x8)
Tripod stand
Mounting Diagram
adjustment knob
Page 8 of 18
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
4. OPERATION
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the Product Overview (page 5) to see the buttons location on the
control panel.
Control Panel
Operation
Button
Function
Press to find an operation mode or to back out of the current menu
option
<MENU>
<DOWN>
<UP>
Press to scroll down the list of options or to find a higher value
Press to scroll up the list of options or to find a lower value
Mode
Programming Steps
Description
Menu Map
Puts the fixture in DMX operating mode
and selects the DMX starting address
DMX Mode
512
A 1~d512
Triggers the sound active program to the
music, using the internal microphone
Sound Active
Automatic
SND
-
Selects one of the built in programs
Adjusts the speed of the automatic
program
AUTO
S 1~100
Set this product in DMX mode to control it with a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
Configuration
(DMX)
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX
input socket of this product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product’s channels.
Starting Address
The Mini 4 Bar™ 2.0 uses up to 15 DMX channels in its 15-channel DMX mode, which
defines the highest configurable address to 498.
If you are not familiar with the DMX protocol, you may refer to the DMX Primer section in
the Technical Information chapter.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 9 of 18
Set this product in one of the standalone modes to control it without a DMX controller.
1. Connect this product to a suitable power outlet.
2. Turn this product on.
Configuration
(Standalone)
Never connect a product that is operating in any standalone mode, whether Static,
Automatic, or Sound to a DMX string connected to a DMX controller. This is
because products in standalone mode may transmit DMX signals that could
interfere with the DMX signals from the controller.
To enable the Sound Active mode, do the following:
1. Press <MENU> repeatedly until SND shows on the display.
2. Press <ENTER>.
Sound Active
Mode
3. Turn the music on and adjust the microphone sensitivity knob until the product
starts reacting to the beat of the music.
The product will only respond to the low frequencies of the music (bass and
drums).
To enable the Automatic Mode, follow the instructions below:
1. Press <MENU> repeatedly until AUTO shows on the display.
2. Press <ENTER>.
Automatic Mode
3. Use <UP> or <DOWN> to adjust the duration of each step of the automatic
program from S__1 (fast) to S100 (slow).
4. Press <ENTER>.
This mode allows a single Mini 4 Bar™ 2.0 unit (the “master”) to control the actions of
one or more Mini 4 Bar™ 2.0 units (the “slaves”) without the need of a DMX controller.
The master unit will be set to operate in either Automatic or Sound Active mode, while
the slave units will be set to operate in Slave Mode. Once set and connected, the slave
units will operate in unison with the master unit.
Master/Slave
Mode
Configure the units as indicated below.
Slave units:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to “001”, as previously explained.
4. Connect the DMX input of the first slave unit to the DMX output of the master
unit.
5. Connect the DMX input of the subsequent slave units to the DMX output of the
previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either Automatic or Sound mode, as
previously indicated.
2. Make the master unit the first unit in the DMX daisy chain.
Configure all the slave units before connecting the master unit to the DMX
daisy chain.
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because it may interfere with the signals from the master unit.
Do not connect more than 31 slave units to the master unit.
Page 10 of 18
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
The included footswitch provides quick access to the preset colors, color change
programs, and triggering via the onboard microphone on the Mini 4 Bar™ 2.0. Please
see the chart, along with the set of instructions below for further explanation.
Footswitch
Operation
1. Power on the fixture.
2. Connect the footswitch to the Mini 4 Bar™ 2.0 via the 4-pin connection cable
with plug.
3. Press pedal #1 (Preset) to activate control. When this is operating properly, the
LEDs on the Mini 4 Bar™ 2.0 will light white (first function on pedal #1).
Pedal
Sub-option
1 x press
2 x press
3 x press
4 x press
5 x press
6 x press
7 x press
Function
White
Red
Green
Blue
Yellow
Magenta
Cyan
1
(Preset)
Color change every second in a
continuous loop
8 x press
9 x press
-
Color change every three seconds in a
continuous loop
2
Sound controlled
(Sound On)
There is no need to modify any settings for the Mini 4 Bar™ 2.0 before connecting
the footswitch. It will operate properly in any mode.
Plug the master fixture in LAST!
Disconnecting
the Footswitch
In order to properly disconnect the footswitch, please follow these steps:
1. Unplug the footswitch from the Mini 4 Bar™ 2.0.
2. Turn the power to the fixture off (unplug the power cable)..
3. Turn the power to the fixture on again (plug in the power cable), and the fixture
will properly operate on any one of the 3 modes..
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 11 of 18
DMX Channel Assignments and Values
Channel
Function
Value
Setting
15-CH
000 009 RGB color mixing mode
010 029 Auto program 1
030 049 Auto program 2
050 069 Auto program 3
070 089 Auto program 4
090 109 Auto program 5
110 129 Auto program 6
130 149 Auto program 7
150 169 Auto program 8
170 189 Auto program 9
190 209 Auto program 10
210 229 Auto program 11
230 249 Auto program 12
250 255 Sound active Mode
000 008 No function
009 255 Dimmer (0~100%)
000 255 0~100%
1
Control/Operating Mode
2
Master Dimmer
3
4
Master Strobe
Red 1
000 255 0~100%
5
Green 1
Blue 1
000 255 0~100%
Color Mixing for Pod 1
Color Mixing for Pod 2
Color Mixing for Pod 3
Color Mixing for Pod 4
6
000 255 0~100%
7
Red 2
000 255 0~100%
8
Green 2
Blue 2
000 255 0~100%
9
000 255 0~100%
10
11
12
13
14
15
Red 3
000 255 0~100%
Green 3
Blue 3
000 255 0~100%
000 255 0~100%
Red 4
000 255 0~100%
Green 4
Blue 4
000 255 0~100%
000 255 0~100%
Page 12 of 18
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
5. TECHNICAL INFORMATION
Dust build up reduces light output performance and can cause overheating. This can
Product
Maintenance
lead to reduction of the light source’s life. To maintain optimum performance and
minimize wear, you should clean your lighting products at least twice a month. However,
be aware that usage and environmental conditions could be contributing factors to
increase the cleaning frequency.
To clean this product, follow the instructions below:
Unplug the product from power.
Wait until the product is cold.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
Clean all glass/transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
Softly drag any dirt or grime to the outside of the glass/transparent surface.
Gently polish the external optics and glass/transparent surfaces until they are free of
haze and lint.
Always dry the glass/transparent surfaces carefully after cleaning them.
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 13 of 18
General Troubleshooting
Symptom
Possible Cause
Possible Action
Excessive load on the circuit
Make sure that the total load
does not exceed 80% of the
breaker or fuse nominal
current
Circuit breaker
or fuse keeps
blowing
Short circuit along the
power lines
Check the power lines and
power cords
No energy on power outlet
Check power outlet
Change to another outlet
Loose or damaged power
cord
Check the power cord
Product does
not power up
Blown fuse
Replace blown fuse with a
good one of the same type
and rating
Internal problem
Send product for repair
Wrong starting address on
the product
Set the correct starting
address on the product
Use the right fader(s) on the
controller
Wrong DMX personality on
the product
Set the correct DMX
product’s personality
Assign the faders
accordingly
Product does
not respond to
DMX
Wrong polarity setting on
the DMX controller
Change the signal polarity
on the controller
Loose or damaged DMX
cable
Check the DMX cable
before the faulty unit
Internal problem
Send product for repair
Signal cables are not DMX
compatible
Replace non DMX cables
with true DMX cables
Interference with AC or
radio signals
Keep DMX cables away
from AC wires or radio
equipment
DMX cable too long
Install an optically coupled
DMX amplifier right before
the product with intermittent
problems
Intermittent DMX
Problems
Too many products
connected
Install an optically coupled
DMX amplifier after unit #32
Terminator not connected
Install a terminator, as
indicated in the DMX Primer
section.
If you still experience problems after trying the above solutions, contact
CHAUVET® Technical Support.
Page 14 of 18
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
In case you need to return a product or request support, follow the procedure below:
Contact
Procedure
If you live in the US, contact CHAUVET® World Headquarters (see below).
If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.(see below).
If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your
distributor of record. Refer to our Web site for contact details of distributors outside
the US, United Kingdom, or Ireland.
World Headquarters
CHAUVET®
General Information
Address:
United Kingdom & Ireland
CHAUVET® Europe Ltd.
General Information
Address:
CHAUVET®
Contact
Information
5200 NW 108th Avenue
Sunrise, FL 33351
(954) 929-1115
Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice:
Fax:
(954) 929-5560
Toll free:
(800) 762-1084
Voice:
Fax:
+44 (0)1773 511115
+44 (0)1773 511110
Technical Support
Technical Support
Voice:
Fax:
(954) 929-1115 (Press 4)
(954) 756-8015
Email:
Email:
World Wide Web
World Wide Web
If you live outside the US, United Kingdom, or Ireland, contact your distributor of
record and follow their instructions on how to return CHAUVET® products to
them. Visit our Web site for contact details.
Call the corresponding CHAUVET® Tech Support office and request a Return
Merchandise Authorization (RMA) number before shipping the product. Be prepared to
provide the model number, serial number, and a brief description of the cause for the
return.
Returning
Products to
CHAUVET®
You must send the merchandise prepaid, in its original box, and with its original packing
and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product
returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Before sending the product, clearly write the following information on a piece of paper
and place it inside the box:
Your name
Your address
Your phone number
The RMA number
A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be your responsibility. As a suggestion, proper UPS packing or double-
boxing is always a safe method to use.
CHAUVET® reserves the right to use its own discretion to repair or replace
returned product(s).
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 15 of 18
The USITT DMX512-A data transmission protocol (DMX, from now on) is based on the
EIA-485 standard and it has 512 channels (001 to 512). This system requires a
controller (DMX controller), one or more DMX compatible products, and a DMX circuit
(also known as “DMX universe”) to link the products to the controller.
DMX Primer
Depending on their complexity and features, DMX compatible products may require
from one to more than 30 DMX channels to operate. Some DMX products have
multiple operation modes (also known as “personalities”), each with its own number of
channels and controllable parameters.
In the DMX system, the controller sends DMX data to each product based on the
product’s starting address. The starting address is the number of the DMX channel
(001 to 512) assigned to the product’s first control channel (Channel 1). When
assigning starting addresses to multiple products, it is critical to ensure that no starting
address is already in use by another product to prevent channels from overlapping.
Otherwise, the affected products may operate erratically.
Starting
Address
For instance, a user has two DMX compatible products. Product “A” has four channels
and product “B” has six channels. If the user configures the starting address of product
“A” to “001”, channels 001 through 004 on the DMX controller will control product “A”.
This means that the user should assign the starting address of product “B” to “005” or
higher. For a starting address of “005”, the DMX controller would use channels 005 to
010 to control product “B”.
It is possible to control multiple products of the same type by assigning each one of
them the same starting address. In this case, all the products would respond in unison
(synchronized) to the signals from the DMX controller.
DMX compatible products receive the control signals
Product
Linking (Daisy
Chain)
DMX
from the DMX controller through the DMX cables.
Controller
Each product has a DMX In and a DMX Out
connector. The figure to the right illustrates how the
products link to each other using multiple segments
of DMX cable in a sequential format called “daisy
1st DMX
Product
chain”.
The order in which the products connect to the DMX
controller is irrelevant because all products receive
the same DMX signals and they only respond to
2nd DMX
Product
them based on their individual starting addresses.
However, it is important to notice that the
connections between products should always be as
short and direct as possible.
To other
products
To ensure the integrity of the DMX signal, follow the
recommendations of the EIA-485 standard:
The maximum recommended cable length is 500 m (1,640 feet).
The maximum recommended number of products on the same daisy chain is 32.
Connecting more than 32 products on one daisy chain without the use of a DMX
optically-isolated splitter may result in deterioration of the digital DMX signal.
Page 16 of 18
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
The DMX protocol requires using special data cables to accommodate for the high
speed digital signals it uses. Despite their apparent similarities, data cables are
electrically different from standard microphone cables because they can carry high
frequency digital signals and have better protection against electromagnetic
interference. You can purchase CHAUVET® certified DMX cables directly from a
dealer/distributor or make your own DMX cable.
DMX Cabling
If you choose to make your own DMX cable, you must use a data-grade cable such as
the Belden 9841, which has the following electrical characteristics:
Type:
shielded, 2-conductor twisted pair
30 pF/ft
55 pF/ft
20 ohms/1000 ft
100~140 ohms
Maximum capacitance between conductors:
Maximum capacitance between conductor and shield:
Maximum resistance:
Nominal impedance:
Each DMX cable must have a male XLR connector on one end and a female XLR
connector on the other end. The DMX protocol indicates that the XLR connectors must
have five pins. However, most lighting products use the 3-pin XLR connector. The pin
assignment of the 3-pin and 5-pin XLR connectors in a DMX cable is as follows:
DMX
Connectors
Male Plug
Female Plug
Signal
3-Pin
5-Pin
5-Pin
3-Pin
Signal
Common
Common
1
1
2
3
4
5
1
2
3
4
5
1
Data -
Data +
Data -
Data +
2
3
2
3
Not used
Not used
Not used
Not used
You can use the above table to create a 3-pin/3-pin cable, a 5-pin/5-pin cable, or a 3-
pin to 5-pin adapter.
The DMX daisy chain uses a terminator to reduce signal transmission problems,
especially with long cables. The terminator consists of either a 3-pin or 5-pin XLR male
plug with a 120 Ω, ¼ W resistor connected to the wire side of pins 2 and 3, as shown
below.
The terminator plug connects to the DMX Out socket of the last DMX product in the
daisy chain.
Do not allow the common wire of the DMX cable to touch the product’s chassis
ground. This could cause a ground loop, which may affect your products’
performance. Test all DMX cables with an ohmmeter to verify the correct polarity
of the wires, and to make sure that they are not touching the shield or each
other.
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 17 of 18
6. TECHNICAL SPECIFICATIONS
Length
Width
Height
Weight
Dimensions and
Weight
35in (889mm)
1.8in (46mm)
8.5in (215mm)
8.2lbs (3.7kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power Supply Type
Range
Voltage Selection
Power
Switching (internal)
100~240V, 50/60Hz
Auto-ranging
Parameter
Consumption
120 V, 60 Hz
52W
230 V, 50 Hz
57W
Operating
0.4A
0.2A
Power linking current (units)
Fuse
8A (18 units)
F1A, 250V
8A (32 units)
F1A, 250V
Power I/O
US/Worldwide
IEC
UK/Europe
IEC
Power input connector
Power output connector
Power Cord plug
Edison
IEC
Edison (US)
Local plug
Type
Lifespan
Light Source
LED
50,000 hours
Color
Red
Quantity
108
Green
Blue
108
108
Parameter
Illuminance @ 2 m
Beam angle
Narrow Lenses
Photo Optic
558 lx (per pod)
16º
24º
Field angle
Maximum External Temp.
Cooling System
Thermal
DMX
104° F (40° C)
Convection
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
15
Product Name
Item Code
Item Number
Ordering
Mini 4 Bar™ 2.0
03030341
MINI4BAR2.0
Page 18 of 18
Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Download from Www.Somanuals.com. All Manuals Search And Download.
|