1611304
DVD+R VIDEO RECORDER
USER MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
To ensure proper use of this product, please read this owner manual carefully
and retain for future reference. Should the unit require maintenance, con-
tact an authorized service location.
GB 1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit does not contain any parts that can be repaired by the
user.
fied technician to restore the prod-
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
when the power supply cord or
plug is damaged, liquid has been
uct to its normal operation.
e) If the product has been dropped
or damaged in any way.
f) When the product exhibits a dis-
tinct change in performance - this
indicates a need for service.
• Follow all instructions.
spilled or objects have fallen into • Servicing
Do not attempt to service this
the apparatus, the apparatus has
been exposed to rain or moisture,
does not operate normally, or has
been dropped.
• Do not use this apparatus near
water.
product yourself as opening or
removing covers may expose you
to dangerous voltage or other
hazards. Refer all servicing to
qualified service personnel.
• Clean only with dry cloth.
• Apparatus shall not be exposed
to dripping or splashing and that
no objects filled with liquids, such
as vases, shall be placed on the
apparatus.
• Do not block any ventilation
openings. Install in accordance
with the manufacturer’s
instructions.
• Replacement Parts
When replacement parts are
required, be sure the service
technician has used replacement
parts specified by the
manufacturer or have the same
characteristics as the original
part. Unauthorized substitutions
may result in fire, electric shock,
or other hazards.
• Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
• Disc Tray
Keep your fingers well clear of the
disc tray as it is closing. It may
cause serious personal injury.
• Burden
• Protect the power cord from
being walked on or pinched
particularly at plugs, convenience
receptacles and the point where
they exit from the apparatus.
Do not place a heavy object on, or
step on the product. The object
may fall, causing serious personal
injury and serious damage to the
product.
• Safety Check
Upon completion of any service or
repairs to this product, ask the
service technician to perform
safety checks to determine that
the product is in proper operating
condition.
• Only
use
attachments/
• Disc
accessories specified by the
manufacturer.
Do not use a cracked, deformed,
or repaired disc. These discs are
easily broken and may cause
serious personal injury and
product malfunction.
• USA & Canada versions comply
with ETL marking.
• Unplug this apparatus during
lightning storms or when unused
for long periods of time.
• Damage Requiring Service
Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
• Useonlywithacart, stand, tripod,
bracket or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
a) When the power-supply cord or
plug is damaged.
b) If liquid has been spilled, or ob-
jects have fallen into the product.
c) If the product has been exposed
to rain or water.
d) If the product does not operate
normally by following the operat-
ing instructions. Adjust only those
controls that are covered by the
operating instructions. Improper
adjustment of other controls may
result in damage and will often
require extensive work by a quali-
GB 2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
4,819,098, and 4,907,093 licensed for limited viewing uses
only.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. Patents and
other intellectual property rights owned by Macrovision Cor-
poration and other rights owners. Use of this copyright pro-
tection technology must be authorized by Macrovision Corpo-
ration, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corpo-
ration. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laborato-
ries. “Dolby”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories.
CONTENTS
INTRODUCTION
Safety................................................................................................................... GB1
Important Safety Instructions ................................................................................... GB2
Contents............................................................................................................... GB3
Packing ................................................................................................................. GB3
Player Zones .......................................................................................................... GB4
Anti-copy Disc Protection ........................................................................................ GB4
Installation ............................................................................................................ GB4
DVD Discs & Cleaning DVD Discs ............................................................................. GB4
Remote Control ...................................................................................................... GB5
Front Panel ............................................................................................................ GB6
Display ................................................................................................................. GB7
Rear Panel ............................................................................................................. GB8
SETUP AND INSTALLATION
Antenna and Television Connections ...................................................................... GB10
Video Connections ........................................................................................... GB10
Audio Connections........................................................................................... GB11
AV Signal Connections...................................................................................... GB12
DVR SETUPS
General System Setup ............................................................................................. GB13
Language Setup ..................................................................................................... GB13
Video Setup ........................................................................................................... GB13
Audio Setup ........................................................................................................... GB15
System Setup ........................................................................................................ GB16
DiscSetup ............................................................................................................ GB17
Record Setup ......................................................................................................... GB17
Schedule ............................................................................................................... GB18
PLAYING DISC
Basic Playback ....................................................................................................... GB19
Active Navigation .................................................................................................... GB20
Programming Example ............................................................................................. GB23
Notes on A-B Repeating........................................................................................... GB23
Notes on Angle Viewing ........................................................................................... GB23
RECORDING
Record Setup ......................................................................................................... GB24
TV Recording - Standard .......................................................................................... GB24
Scheduled Recording ............................................................................................... GB26
External Signals Recording ....................................................................................... GB26
Editing
Editing the content of DVD+RW ................................................................................ GB27
Disc Media Editing .................................................................................................. GB28
TROUBLE SHOOTING
Problems? ............................................................................................................. GB29
Disc You Can Play ................................................................................................... GB30
Packing
Examine the contents of the box for your Digital Video Recorder.
There should be the following:
• Digital Video Recorder with attached power cord
• Remote Control with 2 batteries
• Instruction Book
• A/V Cable
• TV Antenna Cable
• Warranty Card and registration information
GB 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Player Zones
For the purpose of distribution of DVD discs, the world has been separated into 6
zones. The zone your unit is intended for is indicated on the Zone Label. This should
be the same as the label on discs available in your region. If you have any difficulties in
playing a disc, make sure that the disc is for the same zone as your player.
1
Region 1
Anti-copy Disc Protection
Some DVD discs have protected by Macrovision.
With these discs the playback on a Television are copyright protected, however you will not be able to record
this signal on a VCR.
Installation
Install your unit on a stable flat surface. There must be sufficient room in front of the unit for the drawer to be
opened and the unit should be positioned so that it can see the remote control.
Do not expose your unit to extremes of temperature or humidity. Avoid standing it on a hot surface such as on
top of other hot running equipment and ensure that there is adequate ventilation to the unit.
* Caution : Do not install this equipment in confined space such as a book case or similar unit!
DVD Discs
There are several types of DVD Disc.
Single sided discs.
Single sided two layer discs.
Double sided discs.
Double sided with 2 layers on both sides.
They play for approximately
They play for approximately
They play for approximately
They play for approximately
2 HOURS
4 HOURS
4 HOURS
8 HOURS
DVD discs have Titles and Chapters. There can be several Titles on one disc and each Title can contain several
Chapters. Titles and Chapters are numbered, e.g. Title 1, Title 2 etc. & Chapter 1,2,3 etc.
Usually Title one will show the disc publisher and studio
logos. The next Title will be the film. Other Titles contain
trailers for other films, production notes, or alternative
endings for the film. There are many possibilities with
Digital Versatile Disc. Chapters within the main Title allow
you to search quickly for a specific point on the disc.
Many discs have a Chapter Menu sometimes called Scene
Index or Scene Menu that displays the first shot from
each Chapter, which allows you to select a shot and play
the disc from that point onwards. DVD discs can be PAL
or NTSC. This player can play both types (if the player
zone is correct).
DVD discs allow up to 8 Languages and 32 subtitles on a single disc. You can select and change the language
and subtitle to suit yourself and play the whole disc or just part of it and view it from different angles.
Cleaning DVD Discs
Picture freezing & sound skipping or repeating can occur if the disc inside the player is dirty.
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out.
• Do not wipe in a circular motion. Circular scratches can cause picture distortion or render the disc
unplayable.
CAUTION - Do not use solvents, commercially viable cleaners, or antistatic
spray intended for analog discs.
GB 4
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
1.
ON/STANDBY toggles between Power On
and Standby mode
2. TV/DVD switches between TV and DVD mode
1
3. DISC OP Enters DVD+R / DVD+RW operation
menu include Disc info, finalize, Title delete,
Erase disc, Lock disc, Compatible disc
21
22
2
3
4. EDIT Enters the DVD+R / DVD+RW disc editing
menu
4
5
5. HIDE Makes the entry and exit points for
hidden chapters
23
6
7
8
6. CM SKIP Jumps 30 seconds to skip commercial
during DVD playback mode
24
25
7. TITLE Turns on DVD title menu
9
8. REC Starts DVD+R recording with the current
source input
10
9. DISPLAY calls up the display menu and disc
navigation menu
26
27
11
10.
11.
(Active Navigation keys) advance
in indicated directions for making
selections in menus
12
13
14
15
28
29
(- CH +) 1) skips backward/forward
in DVD mode to the previous or next chapter/
track, 2) channel up/down in TV mode
30
31
32
33
16
17
18
19
12.
starts playing
pauses playing
V-SYSTEM
13.
34
35
14. ANGLE switches between different view angles
(depends on disc), should press ENTER to
confirm selected angle.
20
15. ZOOM selects zooming options when playing
DVD by pressing repeatedly
16. BOOKMARK bookmarks the current position
17. SEARCH Enters the search time
menu
27. ENTER
confirms selection or starts playing
1) starts backward or forward search
18. TIMER enters the Timer setup menu
19. PROGRAM programs CD / VCD playback
20. VOLUME adjusts volume level
28.
2) starts slow forward or backward in Pause mode
stops disc playback or recording
29.
21. SOURCE switches between AV1/AV2 signals
30. SUBTITLE switches between different subtitles
22.
opens or closes the disc tray
31. AUDIO switches between different audio output
mode
23. 0 - 10 (Numeric keys) uses for direct
numerical entry or selections of title, chapter,
track, tuner channel and time input
32. REPEAT toggles between different repeat mode
A - B repeats a selection from point A to point B
24. MENU / PBC turns on DVD disc menu; PBC on/
off in VCD mode
33. RANDOM starts playback in random order
34. MUTE mutes or unmutes audio output
25. SETUP enters or exits the setup menu
26. RETURN exits or returns to the previous
35. V-SYSTEM switches between the different video
output modes
GB 5
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL
2
3
4
5
6
7
8
1
9
10 11
12
13
14
15
16
17
1. Power On / Off
2. Disc Tray
corresponding video out jacks on the auxiliary
items. e.g. TV, VCR or satellite receiver
11. Audio Inputs (AV2)
For connecting audio (Left/Right) input signals
from auxiliary sources such as VCR, TV or
Satellite Receiver
3.
4.
5.
6.
opens or closes the disc loading tray
skips to previous chapter/track in DVD mode
skips to next chapter/track in DVD mode
pauses playing
12. AV selects different AV as the input source,
e.g. AV, SAV, SCART or DV
13. DVD enters DVD mode for playing DVD, VCD,
CD and so on
7.
8.
starts playing in DVD/CD/VCD mode
stops playing or recording
14. TV switches to TV mode
15. REC start recording
16. Infra-Red Receiver Window
17. VFD Display Area
9. S-Video Input (SAV2)
For connecting video signals from the
corresponding video out jacks on the auxiliary
items. e.g. TV, VCR or satellite receiver
10. Video Input (AV2)
For connecting video signals from the
GB 6
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
1
2
3
4
5
6
7
8
9
DTS
10
11
12
13
1. Disc Formats (DVD, DVD+/-RW, DVD+/-R)
Indicator
7. DTS Indicator
8. Progressive Scan On Indicator
9. Recording Indicator
2. Disc Play Status
Lights up during Playback
3. Pause Indicator
10. Record Quality Indicator (HQ, SP, EP, SLP)
11. Disc Spinning Speed Indicator
12. Alphanumeric Display
4. Channel/Chapter indicator
5. Dolby Digital Indicator
6. Dolby Pro Logic II Indicator
13. AM/PM Indicator
GB 7
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR PANEL
4
9
2
7
11
1
3
6
5
8
10
IMPORTANT!
Connect the AC cord only after the antenna and all optional equipment have been connected.
Never make or change any connections when the power is switched on.
The rating plate is located at the rear panel of the unit.
1. Power Cord
2. Antenna In
Antenna or cable input.
3. Antenna Out
Antenna loop through output.
4. Video Input (AV1)
For connecting video signals from the corresponding video out jacks on the auxiliary items, e.g. TV, VCR or
satellite receiver.
5. Audio Inputs (AV1)
For connecting audio (Left / Right) input signals from auxiliary sources such as VCR, TV or Satellite
Receiver and playing them through this Digital Video Recorder.
6. S-Video Input
For connecting video signals from the corresponding S-Video out jacks on the auxiliary items, e.g. TV, VCR
or satellite receiver.
7. Composite Video Output
For connecting to TVs (Most TVs have this type of connections. If your TV has Component or S-Video
inputs, a better picture will be obtained).
8. Composite Audio Output
For connecting to TVs (Most TVs have this type of connections. If your TV has Component or S-Video
inputs, a better picture will be obtained).
9. Component Video & Progressive Outputs
For connecting TV with component video input (using component video cable, not provided).
10. S-Video Output
For connecting the S-VIDEO IN jack on the TV using an optional S-Video cable. This type of connection will
provide superior picture quality. However, your TV must be equipped with an S-Video input socket.
GB 8
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR PANEL
4
9
2
7
11
1
3
6
5
8
10
11. Digital Coaxial Output
For connecting an external equipment that has digital audio input jack, such as a CD recorder.
GB 9
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP AND INSTALLATION
The following setup and installation diagrams show the different video and audio connections to TV, Receiver and
Other video equipment.
Important
Make sure the AC Voltage matches your local voltage.
Connect the AC cord only after the antennas, and all optional equipment are connected.
(1) Antenna and television connections
Outdoor antenna
Indoor antenna
Or
ANTENNA CABLE
(Not Included)
USE EITHER ONE
TV ANTENNA CABLE
(Included)
RCA AV CABLE
(Included)
REMARK: FOR RF LOOP THROUGH FUNCTION, CONNECT UP BOTH ANTENNA CABLE
& TV ANTENNA CABLE.
(2) Video connections
RCA VIDEO CABLE
(Included)
FOR GOOD PPICTURE
S-VIDEO CABLE
t Included)
FFOOR BETTER PICTURE
((Not
COMPONENT VIDEO CABLE
(Not Included)
FOR BESTT PICTURE
REMARK: PLEASE ENSURE YOU SELECT THE CORRECT VIDEO OUTPUT. REFER TO
CH2.4 OR P16.
GB 10
Download from Www.Somanuals.com. All Manuals Search And Download.
(3) Audio connections
RCA AUDIO CABLE
(Included)
FOR GOODD SOUND
Connecting to 5.1ch receiver
5.1 CH RECEIVER
DIGITAL COAXIAL AUDIO IN
Centre Front
speaker Right
Rear
Right
Rear
Left
Front
Left
Sub
woofer
TV
Front left
speaker
Front right
speaker
Center sppeaker
COAXIAL AUDIIO CABLE
(NOT INCLUDED)
Rear speeaker
( right suurround )
Rear speeaker
( left suurroundd )
Subwoofer
GB 11
Download from Www.Somanuals.com. All Manuals Search And Download.
(4) AV Signal connections
AV Rear Input
AV Front Input
RCA AUDIO CABLE
RCA VIDEO CABLE
RCA AUDIO CABLE
RCA VIDEO CABLE
S-VIDEO CABLE
(NOT INCLUDED)
FOR BETTER PICTURE
A/V CABLE
(INCLUDED)
A/V CABLE
(INCLUDED)
S-VIDEO CABLE
(NOT INCLUDED)
FOR BETTER PICTURE
S-VIDEO
OUT
Audio Out
R
Video Out
L
S-VIDEO
OUT
Audio Out Video Out
R
L
GB 12
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR SYSTEM SETUPS
SETUP
You can customize the unit setting by accessing the
Setup Menu. Pressing SETUP on the remote control,
the Setup Menu will appear on the TV screen. Use
Active Navigation keys to make selection . Press to
return to the Setup Menu and press SETUP again to
exit the Setup Menu.
Language
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
<SETUP> Exit <UP/DOWN> Select
<ENTER> Confirm selection
1. Language Setup
SETUP
LANGUAGE
Language
OSD
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
DVD Menu
Audio
Use the Active Navigation keys to select
Language, and press ENTER to confirm.
Subtitles
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
1.1 OSD ( ON SCREEN DISPLAY)
OSD
-
-
Use or to highlight OSD and press ENTER.
Use or to select the OSD language you
prefer , press ENTER again to confirm.
English
Español
Français
Deutsch
1.2 DVD MENU
DVD MENU
-
Use or to highlight DVD MENU and press
ENTER.
Use or to select the language you prefer ,
press ENTER again to confirm.
Default
English
Español
Français
Deutsch
-
1.3 AUDIO
AUDIO
-
Use or to highlight DVD MENU and press
ENTER.
Use or to select the language you prefer ,
press ENTER again to confirm.
Default
English
Español
Français
Deutsch
-
1.4 SUBTITLE
SUBTITLE
-
Use or to highlight SUBTITLE and press
ENTER.
Default
SubTitle Off
English
-
Use or to select the subtitle language you
prefer , press ENTER again to confirm.
Español
Français
Deutsch
2. Video Setup
SETUP
VIDEO SETUP
Use the Active Navigation keys to select Video
Setup, and press ENTER to confirm.
Language
Aspect Ratio
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
Channel Search
Manual Search
Cable / Antenna
Output Format
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
GB 13
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 TV ASPECT
TV ASPECT
-
Use or to select TV Aspect option according
to your TV type, and press ENTER to confirm.
For a wide-screen (16:9) TV, select “16x9
wide screen”
16:9 Wide
4:3 Letterbox
4:3 PanScan
- for a 16:9 movie, you will have full screen
viewing.
- for a 4:3 movie, black bars will appear on the
left and right sides of the screen.
For a conventional 4:3 TV, select either
“Letterbox” or “PanScan”
- if you select 4:3 Letter Box for a 16:9 movie,
black bars will appear at the top and bottom of
the screen.
- if you select 4:3 PanScan for a 16:9 movie, the
left and right edges of the screen are hidden.
- if you select either 4:3 Letter Box or 4:3
PanScan for a 4:3 movie, you will have full screen
viewing.
2.2 CHANNEL SEARCH
-
Use or to highlight CHANNEL SEARCH and
press ENTER to confirm.
CH SEARCH
Confirm
Cancel
-
-
Press ENTER to start Channel Search.
During auto-searching, press STOP to cancel
searching.
To cancel, press STOP key
002 Channels found
20%
-
-
When the channel searching is completed, the
found channels will be displayed on the screen.
Press LEFT to exit and return to the main menu.
Channels searching done!
To exit press LEFT key.
2.3 MANUAL SEARCH
-
Select a desired channel location with
remote control.
on
CH MANUAL SEARCH
Confirm
Cancel
-
-
Use or to highlight Manual Search and press
ENTER to confirm.
Select Video and Audio system to match your TV
or other equipment, press ENTER to confirm.
To cancel, press STOP key
001 Channels found
-
-
Press ENTER to start Channel Manual Search.
20%
The found channels will be displayed on the
screen one by one.
Channels searching done!
To exit press LEFT key.
-
Press ENTER to confirm. Press LEFT to
retrieve. Press STOP to exit and return to the
main menu.
GB 14
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE / ANT.
2.4 CABLE / ANTENNA
-
Use or to highlight CABLE / ANTENNA and
press ENTER.
Antenna
Cable
-
Use or to select between Antenna & Cable
to match your TV setting, press ENTER again to
confirm.
2.5 OUTPUT FORMAT
-
Use or to highlight OUTPUT FORMAT and
press ENTER.
Use or to select among NTSC, PAL &
Progressive to match your TV or other
equipment, press ENTER again to confirm.
Progressive:
OUTPUT FMT
NTSC
-
PAL
Progressive
By displaying all the lines of a picture
simultaneously (instead of displaying odd and
even lines alternatively such as a conventional
TV). Progressive Scan greatly enhance picture
resolution while minimizing distortion and
flickering.
To use this feature, your TV must be
Progressive Scan compatible with Component
Video Output jacks connected to the DVD
unit.
3. AUDIO SETUP
SETUP
AUDIO SETUP
Use the Active Navigation keys to select Audio
Setup, and press ENTER to confirm.
Language
DRC
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
SPDIF
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
3.1 DRC
-
-
Use or to highlight DRC and press ENTER.
Use or to turn DRC on/off, press ENTER
again to confirm.
DRC
ON
Off
This controls the Dynamic Range Compression
(DRC) for night time listening. DRC reduces the
difference bewteen normal voices and sounds
such as explosion to avoid waking your
neighbours. The amount of range control available
depends on the disc.
3.2 SPDIF
-
-
Use or to highlight SPDIF and press ENTER.
Use or to select between PCM and Digital,
press ENTER again to confirm.
SPDIF
PCM
Digital
Select the Digital option for Audio connection to
a non DTS or Dolby decoding external amplifiers
& PCM option for decoding equipped amplifiers.
GB 15
Download from Www.Somanuals.com. All Manuals Search And Download.
4. System Setup
SETUP
SYSTEM INFO
Language
Date and Time
Version
Use the Active Navigation keys to select System
Setup, and press ENTER to confirm.
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
Ratings
Screen Saver
Auto Shutdown
Password
Factory Reset
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
4.1 DATE & TIME
DATE & TIME
-
Use or to highlight Date & Time and press
ENTER.
Use or to highlight field and use or to
change Date & Time, press ENTER again to
confirm.
Time:
02:24:11 AM
hh:mm:ss
-
Date:
01/02/04
Sun
mm/dd/yy
4.2 VERSION
VERSION
-
Use or to highlight Version and press
ENTER.
Jul 28 2004 AUL28_615_RC:1
MAIN0304112013
Z.DC
-
The information of system version will show on
the screen , press ENTER again to confirm.
4.3 RATINGS
Enter password:
-
Use or to highlight Ratings and press
ENTER.
x
__ __ __ __ __
-
Use or to select the Ratings option, press
ENTER again to confirm.
RATINGS
For initial access of Ratings, a password needs
to be set up. Please refer to “Password” option
on the same menu.
1 - G
2
3 - PG
4 - PG - 13
5
6 - R
7 - NC -17
8 - No Limit
4.4 SCREEN SAVER
SCREEN SAVER
-
Use or to highlight Screen Saver and press
ENTER.
On
Off
-
Press ENTER again to confirm turn on/off the
Screen Saver.
4.5 AUTO SHUTDOWN
AUTO SHUT DOWN
-
Use or to highlight Auto Shutdown and press
ENTER.
Press ENTER again to confirm turn on/off the
Auto Shutdown.
On
Off
-
When the Auto Shutdown is turned on, the player
will shut down automatically after it is stopped
for a period of time.
GB 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter password:
4.6 CHANGE PASSWORD
x
__ __ __ __ __
x
-
Use or to highlight Password and press
ENTER.
-
The Enter password window will show on the
screen, input your password and press ENTER
again to confirm.
Enter new password:
x
__ __ __ __ __
x
-
-
Input new password and re-input to confirm.
Press ENTER to save the new password.
Enter password again:
x
x
__ __ __ __ __
4.7 FACTORY RESET
FACTORY RESET
-
Use or to highlight Factory Reset and press
ENTER.
Cancel
Confirm
-
Press ENTER again to confirm or cancel the
Factory Reset. This is an initial set and you need
to confirm it before start using the DVR player.
5. Disc Media
SETUP
DISC MEDIA
Language
Disc Info
Finalize
Erase
Please refer to Editing a Disc of DVD+RW on
page 28 for details.
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
6. Record Setup
SETUP
RECORD SETUP
Language
Record Quality
Auto Chapter
Please refer to Recording on page 24 for details.
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
GB 17
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Schedule
SETUP
SCHEDULE
PROG LIST
Language
Use the Active Navigation keys to select
Schedule, and press ENTER to confirm.
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
7.2 PROG LIST
Entry
Freq
Start
Length
Source
Quality
-
Use or to highlight Prog List and press
ENTER.
01
02
03
04
05
06
07
08
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
______
______
______
______
______
______
______
______
__
__
__
__
__
__
__
__
-
The program list will appear on screen, use or
to select the program you want, and press
ENTER again to confirm.
Remark: Please allow approx. 5 minutes gap
between the ending of one program to the
beginning of next program.
GB 18
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING DISC
2
6
4
3
5
1
DVD
Basic Playback
1. Press DVD Power to switch the unit on, the
default mode is DVD.
- The DVD button lights up on the unit.
2. - Press [OPEN/CLOSE] to open the disc tray.
- Load the disc on the tray with the label side
facing upward.
1
- Press [OPEN/CLOSE] to close the tray.
2
3. Play
- Press [ENTER/PLAY] or
playback.
to start the disc
4. Pause
- Press [PAUSE] on the remote or on the
front panel during playback.
- Press [ENTER/PLAY] or
play.
to resume normal
5. Stop & Resume
- Press once to enter resume mode;
press [ENTER/PLAY] to resume playback from
the stop point.
- Press twice to stop completely;
press [ENTER/PLAY] or
from the beginning.
to start playback
7
5
6
4
3
6. Skipping
- Press
to skip forward or backward
a chapter or track.
- Press [ENTER/PLAY] or
playback].
to resume normal
V-SYSTEM
7. Fast Search
- Press
to search forward or
backward quickly.
- Press [ENTER/PLAY] or
playback].
to resume normal
Slow Motion/ Frame by frame (DVD/VCD)
- While paused
Press to start forward or backward
slow motion play.
Press repeatedly to move forward frame
by frame.
REMARK: Set Up menu can accessed during playback
to adjust different setting by pressing the
SET UP button.
Press [ENTER/PLAY] or
playback.
to resume normal
GB 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Active Navigation & Info Bars
All playback operation can be operated by the naviga-
tion. During playback, press DISPLAY to access the
info bar:
•
Use or to highlight an option and press
ENTER to enter it.
•
•
•
Press ENTER to confirm your settings.
Press RETURN to return to the info bar.
Press DISPLAY again to exit the info bar.
Note: The info bars are not displayed on one screen,
you must use or to access different fields of info
bars.
For DVD
Title
Select to choose an available title with or or by
inputting numbers .
Chapter
Select to choose an available chapter with or or by
inputting numbers.
Timer
Goto the point you want to start from by inputting
the time.
Audio
Select your desired audio setting if available on the
disc. You can also press [AUDIO] on the remote
control to make direct selection.
Subtitle
Select to choose an available subtitle with or if
available on disc. Press [SUBTITLE] on the remote
control to access this directly.
Repeat
Repeat playback of the whole section of disc, title or
chapter by selecting “Disc”, “Title” or “Chapter”. Select
“Off” to return to normal playback.
Timer Display Mode
Select to choose an available timer display mode with
or . The Timer will display with correspondent mode.
GB 20
Download from Www.Somanuals.com. All Manuals Search And Download.
For CD
Track
Select to choose an available track with or or by
inputting numbers .
Timer
Goto the point you want to start from by inputting
the time.
Play Mode
Set your preferable playback mode such as PROGRAM,
RANDOM and various repeat mode with or . Press
[RANDOM] repeatedly on the remote control to make
direct selection.
Repeat
Repeat playback of the whole section of disc or track by
selecting “Disc” or “track”. Select “Off” to return to
normal playback.
Timer Display Mode
Select to choose an available timer display mode with
or . The Timer will display with correspondent mode.
For VCD
Track
Select to choose an available track with or or by
inputting numbers .
(Not available when PBC ON)
Timer
Goto the point you want to start from by inputting
the time. (Not available when PBC ON)
Audio
Select your desired audio setting if available on the
disc. Press [AUDIO] on the remote control repeatedly
to make direct selection.
GB 21
Download from Www.Somanuals.com. All Manuals Search And Download.
PBC
Select to turn the PBC On/Off if available on disc.
For MP3
Play Mode
Set your preferable playback mode such as PROGRAM,
RANDOM and various repeat mode.
Repeat
Repeat playback of the whole selected section. The
available options are “File”, “Folder”, “Disc”, “Play File”,
“Play Folder” & “Play Disc”. Select “Off” to return to
normal playback.
Timer Display Mode
Select to choose an available timer display mode with
or . The Timer will display with correspondent mode.
Programming Example (CD)
•
•
During playback, press STOP to stop disc
playing.
Press PROG on remote control to access the
programming play list.
•
•
Use or to select the track list button.
Use or to select tracks you want to play,
and press ENTER to add it to the right button.
To clear tracks you have selected and added to
the right button, use or to switch to the
selected track list, press ENTER to delete your
selection.
•
•
•
To play CD program, use or to highligh Play
icon and press ENTER to start playing.
To clear all seletions you have added in the right
button, use or to highlight the Clear All and
then press ENTER to clear them.
•
Press RETURN to return to normal playback.
Notes on A-B Repeating (DVD)
•
During playback, press REPEAT at the start
point of the passage you want (A), press REPEAT
again at the end of the passage (B). The passage
will then be repeated continuously between point
A and B.
•
Press REPEAT again to resume normal playback.
GB 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Angle Viewing
•
For discs that can be shown in different angles,
you may use ANGLE on remote control to access
angle viewing funtion.
•
Press ANGLE, the angle info bar is displayed on
the screen. Press ENTER to confirm.
•
•
Use or to switches among different angles.
Press ENTER to confirm selection, the disc will
be displayed at your selected angle.
GB 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Record Setup
Before start the timer recording, you should setup
your system as below.
SETUP
SYSTEM INFO
Date and Time Setup
Language
Date and Time
Version
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
Ratings
-
-
Press SETUP to access the setup menu.
Screen Saver
Auto Shutdown
Password
Use active navigation keys and ENTER key to
access the Date and Time setup, press ENTER
to confirm again.
Factory Reset
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
-
-
The Date & Time submenu window is displayed on
the Screen. Use active navigation keys to select
and change the date and time as per your local
clock. Press ENTER to save the change.
DATE & TIME
Time:
02:24:11 AM
hh:mm:ss
Date:
01/02/04
Sun
mm/dd/yy
Use or to highlight Record Setup, and press
ENTER to confirm.
SETUP
RECORD SETUP
Language
Record Quality
Auto Chapter
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
Record Quality
Use or to highlight Rec Quality and press
ENTER.
REC QUALITY
-
HQ
SP
-
Use or to select the record quality option
you want, and press ENTER again to confirm. The
available options are HQ, SP, LP, EP & SLP.
Sugget to always select HQ to get the highest
definitions.
LP
EP
SLP
AUTO CHAP
Auto Chapter
Use or to highlight Auto Chapter and press
ENTER.
-
On
Off
-
Use or to select On or Off to turn on/off the
auto chapter, and press ENTER again to confirm.
This function dividess the recorded disc into
chapters automatically.
SETUP
VIDEO SETUP
TV Recording - Standard
Language
Aspect Ratio
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
Channel Search
Manual Search
Cable / Antenna
Output Format
To record TV programs, you should do the TV channel
searching first.
-
In TV mode, press SETUP to access the setup
menu.
-
Use or to highlight Video Setup, and press
ENTER to confirm.
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
GB 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Search
-
Use or to highlight Channel Search, and
press ENTER to confirm.
To cancel, press STOP key
002 Channels found
-
-
The unit will start search TV channel
automatically. This will take several minutes to
complete.
20%
During auto-searching, press STOP to cancel
searching.
-
-
When the channel searching is completed, the
found channels will be displayed on the screen.
Press ENTER to confirm and to exit.
Manual Search
To cancel, press STOP key
001 Channels found
-
You may also get access to TV tuning by Manual
Search. First, select the desired channel location
before the search.
20%
-
-
Use or to highlight Manual Search, and
press ENTER to confirm. The unit will start
Manusearch.
Channels searching done!
To exit press LEFT key.
The found channels will be displayed on screen
one by one. Press Enter to confirm the result.
Press LEFT to retrieve. Press STOP to cancel.
Recording
-
-
Make connections illustrated as page 11-13.
Insert a recordable DVD+RW or DVD+R into the
disc tray. If it’s a new disc, the system will
format it automatically.
-
-
-
After a while, a menu will pop up on the screen
showing the disc information as name, size, etc.
In TV mode, press REC to start recording, the
REC icon will be displayed on the TV screen.
Press PAUSE to suspend the recording when
needed. The PAUSE icon will be displayed on the
TV screen. Press PAUSE again to restart
recording.
-
During TV recording, press REC once, the unit is
set to record for 30 minutes, press REC twice,
the unit is set to record for another 30 minutes,
and the set time is shown on the screen
accordingly.
GB 25
Download from Www.Somanuals.com. All Manuals Search And Download.
-
-
Press STOP to quit recording. Wait until the
recording is completed successfully when the
WAIT icon disappears on screen.
Switch the unit to DVD mode, use active
navigation keys to highlight the title you desire
and press ENTER or PLAY to start playing the
title you selected.
SETUP
SCHEDULE
PROG LIST
Scheduled Recording
Language
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
Scheduled Record
-
Get access to the Prog List under Schedule on
Setup menu, press ENTER to confirm. Or press
TIMER to access the Record Prog List.
Use or to select one Entry, and press ENTER
to display the Entry editing window.
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
-
-
-
Use or to select field of record settings.
Use or to change your settings, or input
your settings with numeric keys.
Entry
Freq
Start
Length
Source
Quality
01
02
03
04
05
06
07
08
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
__:__
______
______
______
______
______
______
______
______
__
__
__
__
__
__
__
__
-
-
When the Timer record setting is completed,
press ENTER to confirm.
The unit will record the schedule automatically if
without any operation for a moment.
-
You may use to delete your scheduled record
settings.
Entry
01
Freq
Start
Length
14:00
Source
AV1
Quality
HQ
01/01/00
13:15
External signals Recording
-
Make connections illustrated as page 13, which
shows various connections to the unit with AV1/
AV2/SCART cables.
-
-
Insert a recordable DVD+RW or DVD+R into the
disc tray.
After a while, a menu will pop up on the screen
showing the disc properties such as name, size,
etc.
-
Use “SOURCE” button on remote control or AV
on front panel to select different AV source.
In AV mode, press REC to start recording.
Press PAUSE or STOP to suspend the
recording. In DVD mode, the recorded title index
menu will display on screen.
-
-
-
Use active navigation keys to highlight the title
you desire and press ENTER or PLAY to start
playing the title you selected.
External Signals Timer Record
-
Following the first three steps as above external
signals recording.
-
-
Get access to the Prog List as stated on top of
this page, following the steps of timer record
settings, press ENTER to save.
The unit will record the schedule automatically if
without any operation for a moment.
GB 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing on DVD+RW
Editing the content of DVD+RW
-
-
Insert a recorded DVD+RW on the disc tray. The
Title Index Menu will pop up.
Use active navigation keys to highlight the title
you want to edit.
Title 5
Ch 3
13:20:17 PM, Jan 1, 2000
Length: 0:21:12 Quality: HQ
Title 4
Ch 2
12:13:02 PM, Jan 1, 2000
Length: 1:30:14 Quality: HQ
Title 6
Ch 3
12:21:27 PM, Jan 1, 2000
Length: 0:18:13 Quality: HQ
Title Editing
Press EDIT to display the title edit bar on the
screen.
EDIT
-
Protect Title
Erase Title
-
-
Use or make a selection, press ENTER to
confirm your selection.
Press EDIT again to exit the menu.
Play full title
Make Compatible
Edit Title
Protect/Unprotect Title:
To protect / unprotect the selected title from
being erased.
Erase Title:
To erase title when the it’s unprotected.
Play full title:
To start playing the full title.
Make Compatible:
To make your disc compatible with other DVD
player.
Edit Title:
To edit the selected title name.
Note: Press STOP twice to exit the Title Index Menu,
press TITLE to show the Title Index Menu again.
Chapter Editing
EDIT
Insert chapter
Remove chapter
Hide chapter
Show chapter
New picture
-
-
-
During Title playback, press EDIT to display the
chapter editing bar.
Use or to select an option and press ENTER
to confirm your selection.
Press EDIT again to exit the menu.
Insert chapter:
To add a chapter at the current point.
Remove chapter:
To remove the current chapter setting.
Hide chapter:
To hide the current chapter when it’s visible.
GB 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Show chapter:
To show the current chapter when it’s invisible.
To access this function, you must select “Play
full title” option on Title Editing menu. During
playback of the full title, the status of hidden
chapters will be displayed on screen.
New picture:
To make the current picture the cover of the title.
Disc Media Editing
Info
SETUP
DISC MEDIA
Language
Disc Info
Finalize
Erase
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
-
Insert a DVD+RW on the disc tray.
Press SETUP to access the Setup menu, use
active navigation keys to select the Disc Media,
press ENTER, Disc Media options will be shown
on the screen.
-
<SETUP> Exit <UP/DOWN> Select
<LEFT> Return <ENTER> Confirm selection
-
-
-
You may also access to the Disc Info by pressing
DISC OP on the remote control.
Use or to highlight the “Disc Info” icon,
press ENTER to confirm.
The disc information is displayed on the screen.
DISC INFO
Disc Type: +RW
Total titles:
Free titles:
8
2
Total recorded time:
Total free time:
7 minutes
HQ: 54 minutes
SP: 108 minutes
LP: 162 minutes EP: 216 minutes
SLP: 324 minutes
Finalize
-
Use or to highlight the “Finalize” icon and
press ENTER. It will take several minutes to
finalize the disc.
Note:
-
If a DVD+R has been finalized, you can not
record or edit the DVD+R any more.
If you want to make your disc compatible
with the other DVD player, you should go on
FINALIZE operation.
-
Erase
-
-
Use or to highlight the “Erase” icon and
press ENTER.
The system will start erasing the disc.
GB 28
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING - PROBLEM ?
If it appears that your unit is faulty, first consult this checklist. It may be that something simple has been
overlooked.
Under no circumstances should you try to repair the player yourself; as this will invalidate the warranty. Only
qualified service personnel can remove the cover or service this player.
NO POWER
NO RETURN TO START-UP SCREEN WHEN DISC IS
REMOVED
•
•
•
Check if the on/off button on the front of the
player is set to on.
Check if power plug of the mains cord is properly
connected.
Check if there is power at the AC outlet by
plugging in another appliance.
•
Check to see if the program requires another
disc to be loaded.
•
Reset by unplugging the player from the power,
then connect the power again.
THE PLAYER DOES NOT RESPOND TO THE RE-
MOTE CONTROL
NO PICTURE
•
•
•
Check if the TV is switched on.
•
•
•
Aim the remote control directly at the sensor on
the front of the player.
Avoid all obstacles which may interfere with the
signal path.
Inspect or replace the batteries.
Select the correct AV input on the TV
Check the video connection between your DVR
and TV.
Check if channel selector is set on AV on the TV.
(See your TV manual for instructions).
Try the progressive/Interlace [I/P] key on your
remote control.
•
•
•
NO AUDIO AT DIGITAL OUTPUT
•
•
Check the digital connections
Check the Digital Out menu to make sure that
the digital output is correctly set.
Try to use normal video output (not S-Video or
YPrPb) and do the setup first.
•
Check if the audio format of the selected audio
language matches your unit capabilities.
DISTORTED PICTURE
•
Check the disc for fingerprints and clean with
soft cloth, wiping from center to edge.
Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
THE DISC IS STUCK INSIDE THE PLAYER
•
•
In case the disc is stuck inside the tray, please
switch off the unit, unplug the power cord and
wait for 2 minutes. The player will resume normal
operation after switching on.
COMPLETELY DISTORTED PICTURE
•
The disc format is not according to the TV-set
used (PAL/NTSC).
NO TV/CABLE SIGNAL CAN BE RECEIVED
•
Check the Setup menu (See DVD Main Page -
Preferences - Video Output).
•
•
•
Check the RF in/out cable connections on the
rear panel of the DVR.
Please double check the In and Out directions
whether it was swapped or not.
Tuner IN should be connected to Antenna or
Cable TV wall socket.
NO COLOUR IN PICTURE
•
The disc format is not according to the TV-set
used (PAL/NTSC).
•
Ensure DVD player is not connected through
VCR.
•
•
Tuner OUT should be connected to TV.
If power off the unit, the quality of TV/cable signal
will be degraded.
PICTURE SWING
Relocated the unit further away from the
•
ALL CABLE TV CHANNELS LOOKS BAD
possible interference or emission source (e.g.
Radio, Power Amplifier, radiator etc.)
•
•
You may have a HRC or IRC cable signal type.
You need to change the cable type from STD to
HRC or IRC (see DVR Main Page - DVR Setup - TV
Cable Mode).
DISC CANNOT BE PLAYED
•
•
•
Ensure the disc label is upwards.
Clean the disc.
Check if the disc is defective by trying another
disc.
•
Please do the auto channels search again after
changed the cable type.
WANT TO BACK TO FACTORY DEFAULT SETTINGS
AND ERASE ALL THE RECORDED PROGRAMS AS
WELL
NO SOUND
•
•
•
•
Check the Audio cable connections between your
DVR and TV.
Check the Audio Setup should be in Analog mode
(see DVD Main Page - Audio Setup - Audio out)
If using a Hi-Fi amplifier, try another sound
source.
•
•
Reset the unit to factory default settings
Then you need to redo Auto Channels Search
again
YOU HAVE FORGOTTEN THE PARENTAL PASSWORD
•
You can set the DVR back to the factory default
settings and reset all your setup options with
the factory password 76418.
Check that DTS is selected in the Audio menu if a
DTS disc is played.
DISTORTED OR B/W PICTURE
•
The disc format does not match the TV-set used
(PAL/NTSC).
GB 29
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC YOU CAN PLAY
While advances have been made to ensure that your disc player is compatible with the largest number of discs
possible, however it cannot be guaranteed that you will be able to play discs which might not be compliant with
audio CD standards. In the case of writable and rewritable discs, compatibility with this player depends on the
DVD writer, the right software and the disc used.
MP3 Files
DVD-Video
CD-R and CD-RW discs containing audio files in MP3
format. As for CD-R MP3 discs, please follow all the
recommendations for CD-R above, along with the
comments below:
Digital video discs - 12 cm and 8 cm, single or double
sided, single or dual layer. DVDs are high-density
optical discs on which high quality picture and audio
are recorded by means of digital signals.
• Your MP3 files should be ISO 9660 or JOLIET
format. ISO 9660 format and Joliet MP3 files are
compatible with Microsoft’s DOS and Windows,
as well as with Apple Mac. These two formats are
the most widely used.
DVD-R, DVD-RW
Most DVD-R and DVD+R (one recording only), DVD-
RW and DVD+RW discs (rewritable). Depending on
the DVD writer and discs used. Recordings using
DVD-R and DVD-RW discs must be made in Video
DVD mode. Recordings using DVD+RW discs must
be made in accordance with the specifications for
DVD+RW discs with a 4.7 GB capacity.
• MP3 filenames should not exceed 12 characters,
and should end with the “.MP3” extension.
General name format: “Title.MP3”. When
composing your title ensure that you use 8
characters or less, have no spaces in the name,
and avoid the use of special characters including (
. , / , \ , = ,+).
Video CD(VCD)
VCD stands for Video Compact Disc on which con-
tains video associates with still images, audio tracks
and interactive menus.
• Use a decompression transfer rate of at least
128kB/sec (kilobytes/second) when recording
MP3 files. Sound quality with MP3 files basically
depends on the rate of compression /
Audio CDs
Audio CDs (8 and 12 cm).
decompression you choose. Obtaining audio CD
quality sound requires an analog/digital sampling
rate, that is converted to MP3 format, of at least
128kB/sec and up to 160kB/sec. Choosing higher
rates, such as 192 kB/sec or more, will rarely
produce better sound quality. Conversely, files
with sampling rates below 128kB/sec will not play
properly.
CD-R & CD-RW
Most CD-R (one recording only) and CD-RW discs
(rewritable). This player can play most CD-R discs.
CD-Rs written during a multi-session recording can
also be played, provided that the session has ended
before the disc is played (depending on the write
software). However, depending on the condition of the
CD writer, computer and the disc used, you may find
that not all discs will play successfully. When playing a
CD-R disc, it is completely normal for the unit to take
up to 20 seconds to recognize the disc before start-
ing to play. If the disc is not recognized after a period
of 20 seconds, remove the disc, and then insert it
again.
• Do not try recording copyright-protected MP3
files.
“Secured” files are encrypted and code-protected
to prevent illegal copying. You must not copy such
files.
Important:
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3 recordings,
or as an assurance of sound quality. You should note
that certain technologies and methods for MP3 file
recording on CD-Rs prevent optimal playback of these
files on your DVD player (i.e. degraded sound quality
and even, in some cases, inability of the player to read
the file).
• Irrespective of the actual recording capacity of
the CD-R, do not use its full capacity.
• CD-Rs should be preferably used instead of CD-
RWs (rewritable CDs) as, in certain cases, CD-
RW playback may be faulty.
• Use reliable, good-quality CD write software.
• Close all other applications on the computer to
ensure reliable CD-R disc recording.
JPEG Files
CD-R and CD-RW with JPEG files. Certain JPEG
files, including progressive JPEG files, cannot be read
by this player.
GB 30
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
Who is Providing This Warranty?
LIMITED WARRANTY
ORBYX ELECTRONICS WARRANTY
ORBYX Electronics warrants that this product will be free
from defects in materials and workmanship for a period of
one (1) year from the date of purchase. Within this period,
simply take the product and your proof of purchase to any
ORBYX Electronics store or dealer and the product will be
repaired without charge for parts and labour. ORBYX
Electronics reserves the right to charge for transportation.
Any product which has been subject to misuse or
accidental damage is excluded from this warranty.
This warranty is only applicable to a product purchased
through ORBYX Electronics' company owned stores and
dealers and to a product that is presented for repair in a
country where ORBYX Electronics offers the product for
sale. While this warranty does not confer any legal rights
other than those set out above, you may have additional
statutory rights which will vary under the laws of the
various countries, states, province and other governmental
entities in which ORBYX Electronics operates. This
warranty is subject to all statutory rights you may have in
the country of purchase.
•
Orbyx Electronics, LLC (“Orbyx), as the distributor of this
Centrios™ product (your “Product”).
What Does This Warranty Cover?
•
This warranty covers defects in materials or
workmanship in your Product under normal use and
conditions.
What is the Period of Coverage?
•
This warranty covers your Product for 12 months from
the original purchase date.
Who Is Covered?
•
This warranty covers the original consumer purchaser.
Coverage terminates if you sell or otherwise transfer
your Product.
What Will We Do To Correct Problems?
•
We will repair your Product or replace your Product with
a new or reconditioned equivalent product, at our option.
How Do You Get Service?
•
Call Orbyx TOLL FREE at 1-866-363-3059 for
instructions for obtaining warranty service from Orbyx’s
authorized service providers.
•
•
Or, return your Product directly to the retail store from
which you purchased the Product.
When you obtain service for your Product, you must
provide a purchase receipt (or other proof of the original
purchase date) and a description of the defect(s).
What Does This Warranty Not Cover?
•
•
This warranty DOES NOT COVER:
damage due to misuse, abuse, alteration, unauthorized
repair, or accident (such as improper electrical current);
•
damage due to “acts of God” (such as lightning) or other
contingencies beyond our control;
•
•
cosmetic damage;
externally generated static, signal reception or antenna
problems not caused by your Product; or batteries.
•
This warranty also DOES NOT COVER, and in no case
will we be liable for, any incidental damages (such as
transportation costs to and from an authorized service
provider, or loss of time) or consequential damages
(such as costs of repairing or replacing other property
which is damaged, including tapes, discs, speakers not
included with your Product or other accessories, or
external electrical systems) resulting from the use of
your Product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
Distributed exclusively in the U.S. by
Orbyx Electronics, LLC
501 South Cheryl Lane,
Walnut, CA 91789
•
Defacing the serial number, or using your Product for
commercial or institutional purposes, voids this warranty.
Are There Other Warranties?
•
There are no express warranties other than those
expressed herein. Neither the sales personnel nor any
other person is authorized to make any other warranties
or to extend the duration of any warranties.
Imported in Canada for/Importé au Canada pour
Orbyx Electronics,
Concord, Canada, L4K 4M3
•
ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY (AN
UNWRITTEN WARRANTY THAT A PRODUCT IS FIT
FOR ORDINARY USE), ARE LIMITED TO 90 DAYS.
Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not
apply to you.
Manufactured in China
For parts, service, and general inquiries please call 1-866-363-3059
How Does State Law Apply?
•
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state.
Limited Warranty/Garantie Limitée
U.S.A & Canada
© 2004 ORBYX Electronics. All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|