MA1305-EB
Operation Guide 5194
About This Manual
• Button operations are indicated using the letters shown
in the illustration.
• For the sake of simplicity, the sample displays in this
manual do not show the analog hands of the watch.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
E-1
• Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background.
All sample displays in this manual are shown using dark figures on a light
background.
For indicators, “On” is indicated by a dark indicator on the positive (dark-on-light)
display, and by a light indicator on the negative (light-on-dark) display.
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
World Time ............................................................................................................ E-17
Countdown Timer ................................................................................................. E-19
Stopwatch .............................................................................................................. E-25
Alarms .................................................................................................................... E-27
Illumination ............................................................................................................ E-32
Reference .............................................................................................................. E-34
Specifications ....................................................................................................... E-37
E-2
E-3
To test the alarm ................................................................................................... E-29
To turn an alarm on and off ................................................................................. E-30
To turn the Hourly Time Signal on and off ......................................................... E-31
To turn on illumination ......................................................................................... E-33
To specify the illumination duration ................................................................... E-33
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the digital time and date ........................................................................... E-11
To toggle the Timekeeping Mode digital time
between DST and Standard Time .................................................................... E-14
To adjust the analog time ..................................................................................... E-15
To view the time in another city .......................................................................... E-17
To toggle a city code time
between Standard Time and Daylight Saving Time ....................................... E-18
To configure the countdown timer ...................................................................... E-22
To use the countdown timer ................................................................................ E-24
To measure times with the stopwatch ................................................................ E-26
To set an alarm time ............................................................................................. E-28
E-4
E-5
General Guide
• Press C to change from mode to mode.
• In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode
World Time Mode
Countdown Timer Mode
Stopwatch Mode
Alarm Mode
Hand Setting Mode
Press
.
E-6
E-7
Timekeeping
Seconds
Day of the Week
Month – Day
Hour : Minutes
This watch features separate digital and analog timekeeping. The procedures for
setting the digital time (page E-11) and analog time (page E-15) are different.
• In the Timekeeping Mode, you can press D to change the display format as shown
below.
Press
.
PM indicator
Seconds
Day of week
Month – Day
Hour : Minutes
E-8
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 5194
Auto-repeat
Countdown End Beeper
When auto-repeat is turned on, the countdown automatically restarts from the
countdown start time when it reaches zero. If left running, the countdown is repeated
a total of eight times, after which it stops automatically.
The countdown end beeper lets you know when the countdown reaches zero.
• When the progress beeper is turned off, the countdown end beeper sounds for
about 10 seconds, or until you press any button to stop it.
• When the progress beeper is turned on, the countdown end beeper sounds for
about one second.
When auto-repeat is turned off, the countdown stops when it reaches zero and the
display shows the original countdown start time.
• Pressing D while an auto-repeat countdown is in progress pauses the current
countdown. You can resume the auto-repeat countdown by pressing D, or you can
press A to reset to the countdown time starting value.
Progress Beeper
When the progress beeper is turned on, the watch uses beeps to signal countdown
progress as described below.
Countdown Timer Beeper Operations
• Starting from five minutes before the end of the countdown, the watch emits four
short beeps at the top of each countdown minute.
• 30 seconds before the end of the countdown, the watch emits four short beeps.
• The watch emits a short beep for each of the last 10 seconds of the countdown.
• If the countdown start time is six minutes or greater, the watch emits a short beep for
each second of the final 10 seconds before the five-minute point is reached. Four
short beeps are emitted to signal when the five-minute point is reached.
The watch beeps at various times during a countdown so you can keep informed
about the countdown status without looking at the display. The following describes the
types of beeper operations the watch performs during a countdown.
E-20
E-21
To configure the countdown timer
Setting
Start Time
Screen
Button Operation
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the current
countdown start time starts to flash, which indicates the
setting screen.
• If the countdown start time is not displayed, use the
procedure under “To use the countdown timer” (page
E-24) to display it.
Use D (+) and B (–) to change the setting.
• You can set a start time in the range of 1 to 60 minutes in
1-minute increments.
Auto-repeat
Press D to toggle auto-repeat on (
displayed).
displayed) and off
(
Progress Beeper
Press D to toggle the progress beeper on (ON) and off
(OF).
2. Press C to move the flashing in the sequence shown
below to select other settings.
4. Press A to exit the setting screen.
• You can also perform steps 1 and 2 of the above procedure whenever you need to
Start Time
Auto-repeat
view the current auto-repeat and progress beeper settings.
Progress Beeper
3. When the setting you want to change is flashing, use
B and D to change it as described below.
E-22
E-23
To use the countdown timer
Stopwatch
Press D while in the Countdown Timer Mode to start the
The stopwatch lets you measure elapsed time, split times,
and two finishes.
countdown timer.
• The countdown timer operation continues even if you
• The display range of the stopwatch is 59 minutes,
exit the Countdown Timer Mode.
59 seconds.
• Press D while a countdown operation is in progress to
pause it. Press D again to resume the countdown.
• To completely stop a countdown operation, first pause it
(by pressing D), and then press A. This returns the
countdown time to its starting value.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
• The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
• Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C (page
E-7).
Minutes
Seconds
E-24
E-25
To measure times with the stopwatch
Elapsed Time
Alarms
You can set five independent Daily Alarms. When an
alarm is turned on, the alarm tone sounds when the alarm
time is reached. One of the alarms is a snooze alarm,
while the other four are one-time alarms.
You can turn on an Hourly Time Signal that causes the
watch to beep twice every hour on the hour.
• There are six screens in the Alarm Mode. Four are for
one-time alarms (indicated by numbers from
AL1through AL4), one is for a snooze alarm
(indicated by SNZ), and one is for the Hourly Time
Signal (indicated by SIG).
Alarm number
Stop
Re-start
Split release
Stop
Stop
Clear
Clear
Clear
Start
Split Time
Split
(SPL indicator
displayed)
Stop
Start
Two Finishes
• All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing C (page
E-7).
Split
Split release
Display time of
second runner.
Start
Alarm time
(Hour : Minutes)
First runner
Second runner
finishes.
finishes.
Display time of
first runner.
E-26
E-27
To set an alarm time
4. While a setting is flashing, use D (+) and B (–) to change it.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (no indicator) or p.m. (P indicator).
1. In the Alarm Mode, use D to scroll through the alarm
screens until the one whose time you want to set is
displayed.
5. Press A to exit the setting screen.
Alarm Operation
The alarm sounds at the preset time for about 20 seconds, regardless of the mode the
watch is in. In the case of the snooze alarm, the alarm operation is performed a total
of seven times, every five minutes, or until you turn the alarm off (page E-30).
• Alarm and Hourly Time Signal operations are performed in accordance with the
Timekeeping Mode digital time.
• To stop the alarm tone after it starts to sound, press any button.
• Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-11)
Displaying the SNZ setting screen (page E-28)
• To set a one-time alarm, display one of the screens indicated by an alarm number
from AL1through AL4. To set the snooze alarm, display the screen indicated
by SNZ.
• The snooze alarm repeats every five minutes.
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
• This operation automatically turns on the alarm.
3. Press C to move the flashing between the hour and minute settings.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
E-28
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 5194
To turn an alarm on and off
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select an alarm.
1. In the Alarm Mode, use D to select the Hourly Time
Hourly time signal
on indicator
Alarm on indicator
2. Press A to toggle it on ( displayed) and off ( not
displayed).
• Turning on a one-time alarm (AL1through AL4)
displays the alarm on indicator on its Alarm Mode
screen.
Signal (SIG).
2. Press A to toggle it on ( displayed) and off ( not
displayed).
Snooze alarm
indicator
• The Hourly Time Signal on indicator is shown on the
display on the Alarm Mode Hourly Time Signal screen,
and in all other modes while the Hourly Time Signal is
turned on.
• Turning on the snooze alarm (SNZ) displays the alarm
on indicator and snooze alarm indicator on the Alarm
Mode snooze alarm screen, and in all other modes.
• In all modes (except for the Alarm Mode), the alarm on
indicator is shown for any alarm that is currently turned
on.
• The alarm on indicator flashes while the alarm is
sounding.
• The snooze alarm indicator flashes during the 5-minute
intervals between alarms.
E-30
E-31
To turn on illumination
Illumination
In any mode (except when a setting screen is on the display), press B to turn on
An ultraviolet LED (light-emitting diode) causes the parts
of the analog face to glow for easy reading in the dark.
illumination.
•
You can use the procedure below to select either one second or three seconds as the
illumination duration. When you press
B, the illumination will remain on for about
one second or three seconds, depending on the current illumination duration setting.
To specify the illumination duration
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C nine times so the illumination duration setting
screen is on the display.
Illumination Precautions
• The illumination provided by the light may be hard to see when viewed under direct
3. While the illumination duration setting is flashing, press
D to toggle the setting between one second ( ) and
three seconds ( ).
sunlight.
• Illumination automatically turns off whenever an alarm sounds.
4. Press A to exit the setting screen.
E-32
E-33
Timekeeping
Reference
• Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to 00 without changing the minutes.
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
• With the 12-hour format, the P indicator appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
Auto Return Feature
If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch automatically exits the setting screen.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The year can be set in the range of 2000 to 2039.
Scrolling
• The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s batteries replaced.
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls through the data at high speed.
• The current time for all city codes in the Timekeeping Mode is calculated in
accordance with the Greenwich Mean Time (GMT) differential of each city, based on
your Home City time setting.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
E-34
E-35
• GMT differential is calculated by this watch based on Coordinated Universal Time
(UTC) data. UTC is the world-wide scientific standard of timekeeping. It is based
upon carefully maintained atomic (cesium) clocks that keep time accurately to within
microseconds. Leap seconds are added or subtracted as necessary to keep UTC in
sync with the Earth’s rotation. The reference point for UTC is Greenwich, England.
Specifications
Accuracy at normal temperature: 30 seconds a month
Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2039
Other: 4 screen formats (Day of the Week, Month – Day, Hour: Minutes, Seconds);
Home City code (can be assigned one of 31 city codes); Daylight Saving
Time (summer time)/Standard Time
Analog Timekeeping: Hour, minutes (hand moves every 20 seconds)
World Time: 27 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
Countdown Timer
Measuring unit: 1 second
Countdown range: 60 minutes
E-36
E-37
Countdown start time setting range: 1 to 60 minutes (1-minute increments)
Other: Auto-repeat timing; Progress beeper
Stopwatch
Measuring unit: 1 second
Measuring capacity: 59'59''
Measuring modes: Elapsed time, split time, two finishes
Alarm: 5 daily alarms (4 one-time alarms: 1 snooze alarm); Hourly Time Signal
Illumination: Ultraviolet LED (light-emitting diode); selectable illumination duration
(approximately 1 second or 3 seconds)
City Code Table
Battery: Two silver oxide batteries (Type: SR726W)
Approximately 2 years on type SR726W (assuming alarm operation 20 seconds per
day and one illumination operation 1.5 seconds per day)
E-38
L-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 5194
• Based on data as of July 2010.
City Code Table
• UTC offsets and the use of summer time are subject to change in the country where
City
UTC Offset/
GMT Differential
City
Code
UTC Offset/
GMT Differential
City
City
they are used.
Code
* In December 2007, the UTC offset for Caracas, Venezuela (CCS) was changed
from –4 to –4.5. However, this watch still uses the old UTC offset of –4 when the
Caracas (CCS) city code is selected.
– – –
–11
–10
–9
–8
–7
–6
–5
–4
–3
–2
–1
JED
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
HKG
TYO
ADL
SYD
NOU
WLG
Jeddah
Tehran
Dubai
Kabul
Karachi
Delhi
+3
+3.5
+4
+4.5
+5
+5.5
+6
+6.5
+7
+8
HNL
ANC
LAX
DEN
CHI
Honolulu
Anchorage
Los Angeles
Denver
Chicago
New York
Caracas
NYC
CCS*
RIO Rio De Janeiro
– – –
– – –
GMT
LON
PAR
CAI
Dhaka
Yangon
Bangkok
Hong Kong
Tokyo
+9
Adelaide
Sydney
Noumea
Wellington
+9.5
+10
+11
+12
0
+1
+2
London
Paris
Cairo
JRS
Jerusalem
L-2
L-3
Download from Www.Somanuals.com. All Manuals Search And Download.
|