E
DATA PROJECTOR
XJ-A135/XJ-A145/XJ-A155/
XJ-A245/XJ-A255
Data Projector
USB Function Guide
Be sure to read the precautions in the separate User’s Guide (Basic Operations). For details about
setting up the Data Projector, see the User’s Guide (Basic Operations).
Be sure to keep all user documentation handy for future reference.
Microsoft, Windows, Windows Vista and PowerPoint are registered trademarks or trademarks of
Microsoft Corporation in the United States and other countries.
ArcSoft and the ArcSoft logo are trademarks or registered trademarks of ArcSoft, Inc. in the
United States and other countries.
Macintosh and Mac OS are trademarks or registered trademarks of Apple, Inc. in the United
States and other countries.
Other company and product names may be registered product names or trademarks of their
respective owners.
The contents of this manual are subject to change without notice.
Copying of this manual, either in part or its entirety, is forbidden. You are allowed to use this
manual for your own personal use. Any other use is forbidden without the permission of CASIO
COMPUTER CO., LTD.
CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third
parties arising out of the use of this product, the included software or this manual.
CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of
data due to malfunction or maintenance of this product, or any other reason.
The sample screens shown in this manual are for illustrative purposes only, and may differ
somewhat from the screens actually produced by the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Performing a Presentation Using the
Projecting the Screen Image of a
Download from Www.Somanuals.com. All Manuals Search And Download.
3
About this manual...
This manual explains function and operations when any one of the following devices is connected to
the USB port of the CASIO Data Projector.
USB memory device
CASIO Multi Projection Camera (YC-400/YC-430)
CASIO Graphing Calculator (fx-9860G Series)
Note
memory or other memory.
Use of a CASIO Multi Projection Camera or graphic scientific calculator requires separate
purchase of the required device by you. Note that these products may not be available in
some geographic areas. For full details, contact the retailer where you purchased this Data
Projector or authorized CASIO dealer.
Terms and Conventions
In this manual, there are many procedures that require parallel operations on the Data Projector and
your computer. The following are special terms and conventions used in this manual to differentiate
between the Data Projector and computer.
Projection area
This is the entire rectangular area that is projected by the Data Projector. Certain Data Projector
operations will cause messages and menus to appear within the projection area.
Computer screen
This is the physical display device of your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
About the Data Projector’s USB Functions
The USB port that is built into the Data Projector lets you connect an external USB device and use it
as an input source for image projection.
USB Memory Device or Memory Card
After you connect a memory device to the Data Projector’s USB port, you can playback (project) the
following types of files.
ECA files (special projector presentation files)
The EZ-Converter FA software that comes with the Data Projector can be used to convert
PowerPoint files to ECA (.eca) files for playback.
Note that unconverted PowerPoint files cannot be played back.
Image Files
Playback is supported JPEG (jpg, jpeg, jpe; excluding progressive format) format or BMP (bmp)
format image files up to about 8 MB in size.
Movie Files
Playback is supported for the following type of movie files.
• Motion JPEG format (.avi)
• Maximum Data rate: 15 Mbps
• Audio Format: ADPCM
• Resolution: 1280 × 720, 640 × 480, 320 × 240
• Frame rate: 24 fps maximum
ECA
AVI
JPEG
USB memory device
Refer to the following for details.
For more information about this:
Refer to this section of this manual:
Converting PowerPoint files to files that can be “Using EZ-Converter FA to Convert PowerPoint Files to ECA
Memory devices that can be connected to the “Connecting a Memory Device to the Data Projector” (page 18)
Data Projector’s USB port
Operations for projecting the contents of files
on a memory device
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Document Camera (CASIO YC-400/YC-430)
You can connect a CASIO Document Camera to the Data Projector’s USB port and project the images
of documents placed on the document stage of the YC-400/YC-430.
YC-400/YC-430
USB
For more information, see “Performing a Presentation Using the YC-400/YC-430 Document Camera”
on page 39.
Graphing Calculator (CASIO fx-9860G Series)
You can connect a CASIO fx-9860G series graphing calculator to the Data Projector’s USB port and
project calculator screen images with the projector.
USB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Connecting a USB Device to the Data Projector
What happens when you connect a USB device while the Data Projector is turned on depends on the
current configuration of the Data Projector’s plug-and-play setting. Plug-and-play is enabled under
the Data Projector’s initial default settings. For more details about the plug-and-play setting, see
“Setup Menu Contents” in the User’s Guide.
If you connect a USB device to the Data Projector’s USB port while it is turned on, it will perform one
of the following operations (depending on its current plug-and-play setting).
When plug-and-play is enabled:
When this type of device is connected:
The Data Projector does this automatically:
USB memory device or USB card reader
with memory card loaded
YC-400/YC-430 Document Camera
Camera is turned on and projects the YC Camera application screen.
When plug-and-play is disabled:
In this case, the image that is currently being projected does not change. However, Viewer, or the YC
Camera Application will start up in the background, depending upon the type of USB device that is
connected to the Data Projector.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Installing the Software
The following USB expansion function software is included on the CD-ROM that comes with the
projector.
Software Name
EZ-Converter FA
Description
Software for converting a PowerPoint file to an ECA file that can
be played back on the projector.
ArcSoft MediaConverter 3 for CASIO Projector
Multi Projection Camera Update Software
Software for converting movie files.
Software for updating the firmware of the YC-400 Multi
Projection Camera.
Minimum System Requirements
Operating System: Microsoft® Windows® 7, Windows Vista® SP2, or Windows® XP SP3
Computer
: IBM PC/AT or compatible that conforms to the following conditions
Windows® 7, Windows Vista®, or Windows® XP pre-installed
PowerPoint 2003, or 2007 installed (to use EZ-Converter FA)
CPU: Pentium® M 1.6GHz or higher; CPU recommended for your computer’s operating system
Memory: The amount of memory recommended for operating system being run
Display: Full-color display with resolution of at least 1024 × 768 that is supported by above
operating systems and the computer being used.
Input Device: Keyboard or other pointing device (mouse supported by the above operating
system or equivalent device)
Normal operation may not be possible under certain hardware configurations.
Operation is not supported on a computer running Windows® 2000, NT, Me, 98SE, 98, 95, or 3.1, or
on a Macintosh or Mac OS computer.
Operation on a computer upgraded to Windows® 7, Windows Vista®, or Windows® XP from another
operating system is not supported.
Operation on a computer running Windows® XP Professional x64 Edition is not supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
To install EZ-Converter FA
1. Place the CD-ROM that comes with the projector into your computer’s CD-ROM
drive.
This will automatically display the CD-ROM menu screen.
2. On the menu screen, click the [Install] button to the right of “EZ-Converter FA”.
Follow the instructions on the dialog boxes that appear on the screen.
If you are running Windows 7 and the “User Account Control” message appears while
installing, click [Yes].
If you are running Windows Vista and the “User Account Control” message appears while
installing, click [Continue].
If you are running Windows XP and message shown below appears while installing, click
[Continue Anyway].
Download from Www.Somanuals.com. All Manuals Search And Download.
9
To install ArcSoft MediaConverter 3 for CASIO Projector
1. Place the CD-ROM that comes with the projector into your computer’s CD-ROM
drive.
This will automatically display the CD-ROM menu screen.
2. On the menu screen, click the [Install] button to the right of “ArcSoft
MediaConverter 3 for CASIO Projector”.
Follow the instructions on the dialog boxes that appear on the screen.
If you are running Windows 7 and the “User Account Control” message appears while
installing, click [Yes].
If you are running Windows Vista and the “User Account Control” message appears while
installing, click [Continue].
If you are running Windows XP and message shown below appears while installing, click
[Continue Anyway].
Note
For information about ArcSoft MediaConverter 3 for CASIO Projector operation and convertible
movie file formats, see the software’s help after you install it. To display help, click the
button
in the upper right corner of the ArcSoft MediaConverter 3 for CASIO Projector window. On the
menu that appears, select [Help].
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Installing Multi Projection Camera Update Software
A YC-400 Multi Projection Camera can be connected to the Data Projector only if it is running firmware
version 1.1 or higher. For information about how to check the firmware version of a camera, see the
file named “YC-Update_Guide_English.pdf” in the “English” folder inside the “User’s Guide” folder on
the CD-ROM that comes with the projector.
To install Multi Projection Camera Update Software
1. Place the CD-ROM that comes with the projector into your computer’s CD-ROM
drive.
This will automatically display the CD-ROM menu screen.
2. On the menu screen, click the [Open Folder] button to the right of “Multi
Projection Camera Update Software”.
This will open the folder on the CD-ROM that contains the file named “YC-400.exe”.
3. Double-click “YC-400.exe”.
Follow the instructions on the dialog boxes that appear on the screen.
Note
Completing the above steps will create a file named “YC-400.bin” in the folder you specify.
For information about how to use the file to update the firmware version of a camera, see the file
named “YC-Update_Guide_English.pdf” in the “English” folder inside the “User’s Guide” folder
on the CD-ROM that comes with the projector.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Projecting the Contents of Files on a
Memory Device
This section explains how to perform the following operations.
How to use EZ-Converter FA computer software to convert PowerPoint files to files that can be
played back with the Data Projector’s Viewer function.
How to project the contents of files stored on a memory devices with the Data Projector’s Viewer
function.
Viewer is one of the Data Projector’s built-in applications. It lets you play back and project the
contents of files from a memory device connected to the Data Projector.
Using EZ-Converter FA to Convert PowerPoint Files
to ECA Files
EZ-Converter FA is computer software for converting PowerPoint files to ECA files that can be played
back and projected by the Data Projector. EZ-Converter FA supports conversion of file created with
Microsoft Office PowerPoint 2003 and 2007. Save for certain exceptions (described below), playback
and projection of an ECA file normally should be able to reproduce transitions, animations, and other
special effects of the original PowerPoint file.
Conversion of OLE objects (movies, audio, etc.) and VBA objects in a PowerPoint file is not
supported.
Conversion of timer and repeat operations in a PowerPoint file animation are not supported.
display time” (page 16). If a PowerPoint file has an animation that is longer, the conversion process
will convert only up to the currently specified maximum animation display time and then advance to
the next step.
Pauses are limited to three seconds. If a PowerPoint file has a pause that is longer, the conversion
process will allow three seconds and then advance to the next step.
Important!
In order to perform the procedures in this section, you will first need to install the EZ-Converter
FA software from the CD-ROM that comes with the Data Projector onto your computer. For
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Starting Up and Exiting EZ-Converter FA
To start up EZ-Converter FA
Perform either of the following operations to start up EZ-Converter FA on the computer.
Double-click the
icon on your Windows desktop.
On your computer’s Windows Start menu, select [All Programs] - [CASIO] - [EZ-Converter FA].
Important!
If your computer is running Windows Vista or Windows 7, starting up EZ-Converter FA will cause
the “User Account Control” message to appear. When it does, click [Allow].
EZ-Converter FA Window
The following shows the window that appears while EZ-Converter FA is running.
ECA player button
Convert button
Close button
Minimize button
To display EZ-Converter FA help
Right-click the left side of the window and then select “Help” on the menu that appears.
To display EZ-Converter FA version information
Right-click the left side of the window and then select “About” on the menu that appears.
To close EZ-Converter FA
Click the close button in the upper right corner of the EZ-Converter FA window.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Converting a PowerPoint File to an ECA File
Important!
Before performing any of the operations here, you will need to have a file created using
Microsoft Office PowerPoint 2003 or 2007 on hand.
Conversion of a PowerPoint file to an ECA file requires playback of the original file from
beginning to end. Note that the time required for conversion will roughly correspond to the
time required for playback.
Note
Starting a conversion operation with EZ-Converter FA will temporarily change the screen
settings of your computer as shown below. Screen settings will revert back to what they were
after the conversion operation is complete.
Operating System:
Windows XP
Changes:
Screen resolution changes to 1280 × 800 or 1024 × 768.
Display card hardware acceleration is disabled.
Windows Vista or
Windows 7
Screen resolution changes to 1280 × 800 or 1024 × 768.
Windows changes to the Basic mode (Windows AeroTM disabled).
The screen resolution of the ECA file will be the resolution specified by EZ-Converter FA
setting (1280 × 800 or 1024 × 768) when the file conversion operation starts. For information
To convert a PowerPoint file to an ECA file
1. Turn on your computer and start up Windows.
2. Connect the USB memory (or memory card) where you want to store the
converted ECA file to your computer.
You can skip this step if you want to save the ECA file to your computer’s local hard disk.
3. On your computer, start up EZ-Converter FA.
If your computer is running Windows Vista or Windows 7, starting up EZ-Converter FA will
cause the “User Account Control” message to appear. When it does, click [Allow].
This will display EZ-Converter FA window.
4. Configure the following settings as required.
If the original file contains an animation, specify the maximum animation display time. See
5. Click the
button at the top of the EZ-Converter FA window.
This displays a dialog box for opening files.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
6. Select the PowerPoint file you want to convert from and then click the [Open]
button.
This will display a dialog box like the one shown below for specifying the ECA file settings.
7. Configure the settings as required on the dialog box.
The following describes the meanings and settings of each of the items that appear on the
dialog box.
Dialog Box Item
Description
Input File
Shows the name of the PowerPoint file selected in step 6. The setting of this item
cannot be changed.
Output Drive
Shows the drive name of the removable disk (USB memory or memory card) connected
to the computer in step 2. When you have multiple removable disks connected to your
computer, you can click the [] button and select the name of the drive where you
want to save the converted file. The converted ECA file will be saved in a folder named
“ECA” on the drive you specify here. Under initial default settings, if there are no
removable disks connected to the computer, the resulting ECA file will be saved in the
same location (drive and folder) as the original PowerPoint file. Click the [Browse]
button and change the save destination, if you want.
Output File Name Shows the file name of the converted ECA file, along with the path from the drive name.
Except for the extension, the file name is the same as the PowerPoint file name. The
setting of this item cannot be changed.
8. After configuring all the settings you want, click [OK].
This will start playback of the PowerPoint file and start converting it to an ECA file.
The “Conversion complete.” message will appear when file conversion is complete.
If you have other PowerPoint files you want to convert, repeat steps 4 through 7.
9. After you are finished converting all the files you want, click the close button in
the upper right corner of the EZ-Converter FA window.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
To specify the screen resolution of the ECA file
1. Right-click the left side of the EZ-Converter FA window.
2. On the menu that appears, click “Output Resolution”.
3. On the sub-menu that appears, select the resolution you want.
The following shows the resolution settings that should be used for each Data Projector
model.
Model
Resolution
1024 × 768
1280 × 800
XJ-A135, XJ-A145, XJ-A155
XJ-A245, XJ-A255
Your computer may not support the 1280 × 800 option, depending on its display resolution.
The setting you select here remains in effect until you change it.
To specify the maximum animation display time
1. Right-click the left side of the EZ-Converter FA window.
2. On the menu that appears, click “Max Animation Display Time”.
3. On the sub-menu that appears, select a maximum animation display time value
(in seconds).
Available sub-menu options are 10 seconds, 20 seconds, 30 seconds, and 60 seconds.
The option you select remains in effect until you change it.
To play back an ECA file on your computer
1. On your computer, start up EZ-Converter FA.
This will display EZ-Converter FA window.
2. Click the
button at the top of the EZ-Converter FA window.
This will display two more buttons as shown below.
3. Click the
button.
This displays a dialog box for opening files.
4. Select the ECA file you want to play back and then click the [Open] button.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
5. Click the
button to start playback.
This will display a control panel at the top of the screen.
Control panel
During file playback, you can use the control panel buttons to perform the operations
described below.
To do this:
Go to the previous page
Go to the next page
Stop playback
Perform this operation:
Click the
Click the
Click the
1. Click the
button.
button.
button.
Jump to a specific page
button and then click “Slide Viewer” on the menu that appears.
2. On the page menu that appears, click the thumbnail of the destination page
and then click [OK].
Display help
Click the
button and then click “Help” on the menu that appears.
Stop playback
Click the
button and then click “Exit” on the menu that appears. You could
also press the [ESC] button on your computer keyboard to stop playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Using Viewer to Project the Contents of a File on a
Memory Device
Use the Data Projector’s Viewer application to project the contents of a file on a memory device.
Viewer starts up automatically whenever you connect a memory device that is supported by the Data
Projector into the Data Projector’s USB port.
Connecting a Memory Device to the Data Projector
The Data Projector’s USB port supports connection of a FAT/FAT32 format memory device supported
by the USB interface. The following are supported memory devices.
USB memory
Memory cards
A commercially available USB card reader is required to connect a memory card to the Data
Projector.
USB storage class (USB Mass Storage Class) compatible digital cameras
Important!
The Data Projector does not support connection of all commercially available USB memory
devices, memory cards, and digital cameras. For details about specific supported memory
devices, contact your original retailer or your nearest authorized CASIO dealer.
To connect USB memory to the Data Projector
Connect USB memory to the Data Projector’s USB port as shown below.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
To connect a memory card to the Data Projector
1. Connect a USB card reader that supports the memory card you are using to the
Data Projector’s USB port.
2. Load the memory card into the USB card reader’s card slot.
For details about how to load a memory card into the USB card reader, see the user
documentation that comes with the reader.
To connect a digital camera to the Data Projector
1. If necessary, configure the digital camera’s USB mass storage class setting.
2. Turn off the digital camera and connect a USB cable to it.
3. Connect the other end of the USB cable (Type A connector) to the Data
Projector’s USB port.
4. Turn on the digital camera.
Note
For details about steps 1, 2, and 4, see the user documentation that comes with your digital
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Starting Projection with Viewer
If the Data Projector is turned on and you are performing the procedure under “Connecting a Memory
main Viewer window shown below to be projected.
Menu Item
Function
Refer to:
Presentation
Enters the Presentation Mode for
projection of ECA files.
(page 14)
Slides
images files.
Movie
Enters the Movie Mode for projection
of movie files.
Viewer Setup
Displays the Viewer setup menu.
Note
If Viewer projection does not start automatically at this time, perform the following steps to
select “Viewer” as the input source.
1. Press the [INPUT] key.
This displays the input source selection screen.
2. Use the [] and [] keys to move the highlighting to “Viewer” and then press the
[ENTER] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Drive Menu
Entering the Presentation Mode, Slide Mode, or Movie Mode while there are multiple memory devices
connected to the Data Projector (multiple USB memory devices connected via a USB hub, multiple
memory cards loaded in the memory card reader connected to the Data Projector, etc.) will cause a
menu like the one shown below to appear on the projection screen.
When this happens, use the cursor keys to move the highlighting to the drive you want to use and then
press the [ENTER] key. This will display a menu of files for the mode you are entering.
Note
The Data Projector can recognize up to four drives.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Projecting an ECA (Presentation) File
Use the Viewer Presentation Mode to project ECA files.
To project an ECA file
1. Connect the memory device where the ECA file you want to project is stored to
the Data Projector.
This will project the main Viewer window. If the main Viewer window does not appear, press
the [INPUT] key and select “Viewer” as the input source.
2. Use the cursor keys to move the highlighting to “Presentation” and then press
the [ENTER] key.
This will project a file menu like the one shown below.
If the ECA file you want to play back is located in a particular folder, use the cursor keys to
move the highlighting to that folder and then press the [ENTER] key.
3. Use the cursor keys to move the highlighting to the ECA file you want to play
back and then press the [ENTER] key (or the [O] key).
This will start playback of the selected ECA file.
4. Perform page change and other operations as required.
To stop ECA file playback and return to the file menu, press the [ESC] key.
If you allow ECA file playback to proceed to the end, the file menu will appear on the
projection screen after the end of the file is reached.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Operations during ECA File Projection
The operations described below can be performed while an ECA file is playing.
To do this:
Go to the previous page
Go to the next page
Perform this operation:
Press the [] key.
Press the [] key.
Pause ECA file playback
1. Press the [FUNC] key.
2. On the function menu that appears, use the cursor keys to move the
highlighting to “Pause” and then press the [ENTER] key.
Jump to a specific page
1. Press the [O] key to display a page menu.
2. Use the cursor keys to move the highlighting to the thumbnail of the page
where you want to start playback of the presentation and then press the
[ENTER] key.
For information about the other operations you can perform while the page
Stop playback and return to the file Press the [ESC] key.
menu
The operations described below can be performed while ECA file playback is paused.
To do this:
Perform this operation:
Resume ECA file playback from
where it was paused
Press the [ENTER] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Page Menu Operations
Pressing the [O] key while an ECA file is being played will project a page menu like the one shown
below.
The operations described below can be performed while the page menu is being projected.
To do this:
Perform this operation:
Re-start file playback from a
particular page
Use the cursor keys to move the highlighting to the thumbnail of the page
where you want to start playback of the presentation and then press the
[ENTER] key.
Scroll to the next screen
Press the [Z] key.
Press the [f] key.
Press the [ESC] key.
Scroll to the previous screen
Re-start file playback from the
page that was being projected
when you pressed [ENTER] to
project the page menu
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Projecting an Image File
Use the Viewer Slide Mode to project image files. You can also group image files and project them in a
specific sequence as a slideshow.
To project an image file
1. Connect the memory device where the image file you want to project is stored to
the Data Projector.
This will project the main Viewer window. If the main Viewer window does not appear, press
the [INPUT] key and select “Viewer” as the input source.
2. Use the cursor keys to move the highlighting to “Slides” and then press the
[ENTER] key.
This will project a file menu like the one shown below.
If the image file you want to project is located in a particular folder, use the cursor keys to
move the highlighting to that folder and then press the [ENTER] key.
3. Use the cursor keys to move the highlighting to the image file you want to
project and then press the [ENTER] key.
This will project the selected image file.
4. Perform the operations described below as required.
To do this:
Scroll back to the previous image
Scroll forward to the next image
Rotate the image right 90 degrees
Rotate the image left 90 degrees
Start a slideshow from the image file
Press this key:
[]
[]
[f]
[Z]
[O]
5. To stop image projection and return to the file menu, press the [ESC] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Projecting a Slideshow
The Data Projector’s Slide Mode lets you group multiple image files and project them in sequence as a
slideshow. You can select either manual playback or auto playback for slideshow image display. The
initial default setting is manual playback.
To prepare image files for slideshow play
Note the following points when preparing your slideshow on your computer.
All of the image files in the slideshow must be in the same folder.
Images will appear during a slideshow in the file name sequence the image files are arranged in the
folder. To display images in a specific sequence, adjust their file names so they are listed in the
folder in the sequence you want.
Copy the folder with the slideshow images to a memory device.
To project image files as a slideshow
1. Connect the memory device where the image files of the slideshow are stored to
the Data Projector.
This will project the main Viewer window. If the main Viewer window does not appear, press
the [INPUT] key and select “Viewer” as the input source.
2. Select either manual or auto scroll, and configure other slideshow settings.
3. Use the cursor keys to move the highlighting to “Slides” and then press the
[ENTER] key.
This will project a file menu.
4. Use the cursor keys to move the highlighting to the folder that contains the
image files that make up your slideshow and then press the [ENTER] key.
5. Use the cursor keys to move the highlighting to the image file you want to start
the slideshow from and then press the [O] key.
This will project the selected image file and start the slideshow.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
6. Perform the operations described below as required.
To do this:
Scroll back to the previous image
Scroll forward to the next image
Perform this operation:
Press the [] key.
Press the [] key.
Pause the slideshow (This option is available only
when “Auto” is specified for the “Image Switching”
setting on the setup menu.)
1. Press the [FUNC] key.
2. On the function menu that appears, use the cursor
keys to move the highlighting to “Pause” and then
press the [ENTER] key.
Rotate the image right 90 degrees
Rotate the image left 90 degrees
Press the [f] key.
Press the [Z] key.
The following operations can be performed while a slideshow is paused.
To do this:
Scroll back to the previous image
Scroll forward to the next image
Rotate the image right 90 degrees
Rotate the image left 90 degrees
Resume the slideshow
Press this key:
[]
[]
[f]
[Z]
[O]
7. To return to the file menu after the slideshow is complete, press the [ESC] key.
Projecting a Movie File
Use the Viewer Movie Mode to project movie files.
Note
Playback of other format movie files is not supported.
The CD-ROM that comes with the Data Projector contains software (ArcSoft MediaConverter
3 for CASIO Projector) for converting some movie file formats to the supported format. For
Download from Www.Somanuals.com. All Manuals Search And Download.
27
To project a movie file
1. Connect the memory device where the movie file you want to project is stored to
the Data Projector.
This will project the main Viewer window. If the main Viewer window does not appear, press
the [INPUT] key and select “Viewer” as the input source.
2. Use the cursor keys to move the highlighting to “Movie” and then press the
[ENTER] key.
This will project a file menu like the one shown below.
If the movie file you want to play back is located in a particular folder, use the cursor keys to
move the highlighting to that folder and then press the [ENTER] key.
3. Use the cursor keys to move the highlighting to the movie file you want to play
back and then press the [ENTER] key (or the [O] key).
This will start playback of the selected movie file.
4. Perform pause and other operations as required.
For details about operations you can perform during projection of a movie file, see
To stop movie file playback and return to the file menu, press the [ESC] key.
When playback reaches the end of the movie file, the projection image will show a still image
of the final movie frame.
5. To return to the file menu after movie playback is complete, press the [ESC] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Operations during Movie File Projection
The operations described below can be performed while a movie file is playing or paused.
To do this:
Perform this operation:
Press the [ENTER] key.
A pause icon ( ) is displayed in the upper left corner of
Pause and resume movie playback
the projection screen while movie projection is paused.
Re-play the file from the beginning
1. Press the [FUNC] key.
2. On the function menu that appears, use the cursor keys to
move the highlighting to “Play from beginning” and then
press the [ENTER] key.
Display the play time in the upper left corner of Press the [O] key.
the projection screen Each press of the [O] key toggles the time indicator between
show and hide.
Total movie play time
Elapsed movie play time
Fast forward*
Fast reverse*
Press the [] key.
Press the [] key.
Press the [ESC] key.
Stop ECA file playback and return to the file
menu
* For details about fast forward and fast reverse, see “To perform fast forward and fast reverse during
movie playback”, below.
To perform fast forward and fast reverse during movie playback
playback of the movie file.
2. Press the [] key for fast forward or the [] key for fast reverse.
This starts the corresponding operation and displays an icon (
for fast forward,
for
fast reverse) in the upper left corner of the projection screen.
Each press of the [] or [] key cycles the corresponding operation between three speeds.
This icon:
Indicates this:
Fast forward (10-second increment)
6X fast forward (60-second increment)
60X fast forward (10-minute increment)
Fast reverse (10-second increment)
6X fast reverse (60-second increment)
60X fast reverse (10-minute increment)
Movie playback stops automatically when a fast forward or fast reverse operation reaches the
last or the first frame of the movie file.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
3. Perform the operations described below as required.
To do this:
Press this key:
[ENTER]
Quit a fast forward or fast reverse operation and resume normal playback
Toggle display of the playback time between show and hide
Stop playback and return to the file menu
[O]
[ESC]
File Menu Operations
This section explains operations you can perform while the file list is displayed in the Presentation,
Slide, or Movie Mode.
List View and Icon View
There are two different views for the Viewer file menu: a list view and an icon view.
List view
Icon view
List view:
This view lists the names of the folders and files on a memory device. This is the initial default view for
the Presentation, Slide, or Movie Mode.
Icon view:
This view shows both icons and names for the folders and files on a memory device. Thumbnails are
displayed for all of the files that can be played back by the Viewer.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
To toggle the file menu between the list view and icon view
Press the [FUNC] key and then the [ENTER] key.
Note
You can specify either the list view or icon view as the default view. For more information, see
To scroll the file menu
Press the [Z] key to scroll forward, and the [f] key to scroll back.
To open a folder
Use the cursor keys to move the highlighting to the folder you want to open and then press the
[ENTER] key.
Note
Counting the root directory of the memory device as the first level you can open nested folders
up to 10 levels.
To exit the current folder and move up to the next level
Press the [ESC] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
To view file properties
1. Display the file menu list view.
2. Use the [] and [] keys to move the highlighting to the file whose properties
you want to view.
A thumbnail and the properties of the currently highlighted file will appear on the left side of
the file menu.
Thumbnail
Properties
The following explains the information that appears in file properties.
Presentation Mode
This item:
Type
Shows this:
“ECA File” (Presentation file converted with EZ-Converter FA)
File size
Size
Date
Pixels
Date and time the file was last modified
Number of pixels in the file
Slide Mode
This item:
Type
Shows this:
Image type (“JPEG Image” or “BMP Image”)
File size
Size
Date
Date and time the file was last modified
Number of pixels in image data included in the file
Pixels
Rotation
This item appears only for image files that include Exif format orientation information.
“Right side - Top” indicates 90-degree rotation right, while “Left side - Bottom”
indicates 90-degree rotation left.
Movie Mode
This item:
Type
Shows this:
“Movie”
Size
File size
Date
Date and time the file was last modified
Number of movie pixels in the file
Pixels
Download from Www.Somanuals.com. All Manuals Search And Download.
32
To return to the main Viewer window
1. Press the [FUNC] key.
2. On the function menu that appears, use the cursor keys to move the highlighting
to “Back to Viewer Selection” and then press the [ENTER] key.
Configuring Viewer Settings
You can use the Viewer setup menu to configure the Viewer function settings described below.
The initial default setting for each item is indicated by an asterisk (*).
Setting Name
Image Zoom
Description
Zoom*:
Causes images to be projected at the Data Projector’s maximum possible size while
maintaining the aspect ratio of the image file.
No Zoom:
Causes images to be projected at the actual size.
Display Sequence
Setup
Specifies the sequence of images in the file menu.
File Names (Ascending)*:
Displays files in file name ascending order.
File Names (Descending):
Displays files in file name descending order
Time (New-to-Old):
Displays files by the time they were last modified, from the newest to the oldest.
Time (Old-to-New):
Displays files by the time they were last modified, from the oldest to the newest.
Startup Mode
Specifies whether the default view when a mode is entered from the main Viewer window
is the list view or icon view.
List View*:
Specifies list view as the default view.
Icon View:
Specifies icon view as the default view.
Image Switching
Manual*:
Specifies manual image scrolling.
Auto:
Specifies auto image scrolling.
Slideshow Display
Interval
Specifies how long each image will remain displayed during a slideshow.
5 seconds*, 10 seconds, 30 seconds, 1 minute, 5 minutes
Slideshow Repeat
Repeat:
Loops playback of a slideshow or movie.
No Repeat*:
Automatically stop playback when the end of a slideshow or movie is reached.
Movie Display
Zoom*:
Causes movies to be played back at the Data Projector’s maximum possible size while
maintaining the aspect ratio of the movie file.
No Zoom:
Causes movie files to be played back at their original sizes.
Initialize Viewer Setup
Returns all Viewer settings to their initial factory defaults.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
To display the Viewer setup menu
Perform either of the following operations.
Operation 1
1. Project the main Viewer window.
If you are playing a file in the Presentation, Slide, or Movie Mode, pause playback and return
to the file menu. Next, press [FUNC], then [], then [ENTER].
2. Use the cursor keys to move the highlighting to “Viewer Setup” and then press
the [ENTER] key.
Operation 2
1. While the Viewer is being projected, press the [MENU] key.
If you are playing a file in the Presentation, Slide, or Movie Mode, pause playback before
pressing the [MENU] key.
2. Use the [] key to move the highlighting to “USB” and then press the [ENTER]
key.
3. Use the [] key to move the highlighting to “Setup” and then press the [ENTER]
key.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
To configure Viewer settings
1. Display the Viewer setup menu.
2. Use the [] and [] keys to move the highlighting to the item whose setting you
want to change.
3. Use the [] and [] keys to display the available settings.
4. After configuring all the settings you want, press the [ESC] key (or press the
[FUNC] key and then the [ENTER] key).
This will return to the main Viewer window.
To return Viewer settings to their initial defaults
1. Display the Viewer setup menu.
2. Use the [] key to move the highlighting to “Initialize Viewer Setup” and then
press the [ENTER] key.
This will cause a “Do you want to restore defaults for the Viewer setup?” confirmation dialog
box to appear.
3. Use the [] key to move the highlighting to “Yes” and then press the [ENTER]
key.
This will return Viewer settings to their initial factory defaults.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Viewer Troubleshooting
Refer to the following whenever Viewer operations are not what you expect.
Memory Devices
Problem
Cause and Required Action
Viewer does not appear when I
connect USB memory to the Data
Projector’s USB port.
The USB memory you are connecting may have a format that cannot be
recognized by the Data Projector. Connect the USB memory to your
computer to check if its file system is FAT or FAT32. If it isn’t, reformat the
USB memory to FAT or FAT32. Note that doing so will delete all of the data
currently in USB memory.
If the Data Projector cannot recognize the USB memory even though its
file system is FAT or FAT32, the USB memory itself may be incompatible.
Try using different USB memory.
“Off” may be selected for the Data Projector’s “Plug and Play” setting. Use
the procedure in the “Configuring Advanced Projector Settings” section of
the User’s Guide on the CD-ROM to change the “Plug and Play” setting to
“On”.
Some folders and/or files are not
displayed in the file menu.
All the folders and/or files contained in a folder will not be displayed if there
are more than 999 folder and/or files inside the folder. If this happens,
reduce the number of folders and/or files in the folder.
Viewer will not display folder contents past 10 folder nesting levels. When
nesting folders on a memory device that you plan to connect to the Data
Projector, make sure that nesting levels do not exceed 10.
There are multiple devices
The Data Projector can recognize up to four drives. If the number of
connected to the Data Projector via connected drives is greater than four, the Data Projector will not recognize
a USB hub or USB card reader, but the fifth and subsequent drives. Connect memory devices while ensuring that
some of the devices are not
recognized.
no more than four drives are connected.
When I connect my digital camera The digital camera’s USB mass storage class setting may not be
to the Data Projector via USB,
digital camera memory contents do
not appear.
configured correctly, or you may need to perform some operation on the
camera. Consult the user documentation for your digital camera for
information about the required settings and operations.
The digital camera may not support USB mass storage class. If it does not,
you will not be able to use Viewer to view digital camera memory contents.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
File Display and Playback
Problem
Cause and Required Action
ECA files converted from
PowerPoint files using
Viewer may be in a mode other than the Presentation Mode. To enter the
Presentation Mode, highlight “Presentation” on the main Viewer window
the file menu.
Image files do not appear in the file Viewer may be in a mode other than the Slide Mode. To enter the Slide
menu.
press the [ENTER] key.
The files may not be of a format that can be recognized by the Data
Projector. Image files require the following file name extensions: .jpg, .jpeg,
.jpe, or .bmp. For details about image file formats supported for Data
Projector playback, see “About the Data Projector’s USB Functions”
Movie files do not appear in the file Viewer may be in a mode other than the Movie Mode. To enter the Movie
menu.
press the [ENTER] key.
The files may not be of a format that can be recognized by the Data
Projector. Movie files require the file name extensions .avi. For details
about the movie file format supported for Data Projector playback, see
On the Slide Mode file menu,
Question marks are displayed in place of thumbnails of images that cannot
question marks (?) appear in place be projected by Viewer (JPEG files larger than 8MB, etc.).
of thumbnails.
I cannot play ECA files I select on
the Presentation Mode file menu.
The file you are trying to play may be corrupted. Re-convert the PowerPoint
files using the procedure under “To convert a PowerPoint file to an ECA file”
I cannot play image files I select on The file you are trying to play may be corrupted. If you have the original file
the Slide Mode file menu.
on your computer, check to see if it is normal. If it is, copy the original file
to the memory device and try playing it again.
I cannot play movie files I select on The file you are trying to play may be corrupted. If you have the original file
the Movie Mode file menu.
on your computer, check to see if it is normal. If it is, copy the original file
to the memory device and try playing it again.
If the message “This movie file cannot be played back.” appears, refer to
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Viewer Error Messages
Problem
Cause and Required Action
Folder does not contain any image There is no displayable folder, ECA file, image file, or movie file in the folder
files.
you are trying to access with Viewer. Use your computer to check the
contents of the folder. For details about file formats supported for Data
This ECA file cannot be played
back.
There may be an error in the ECA file itself. Play back the ECA file using the
EZ-Converter FA on your computer and check it.
Cannot display an image file.
The image file may be too large to play back. Use image files that are no
larger than 8MB.
The image file may be a progressive JPEG file. The Data Projector does
not support playback of progressive JPEG files. Use normal (non-
progressive) JPEG format files.
There may be an error in the image file itself. Open the image file on your
computer and check it.
This movie file cannot be played
back.
The movie file may be a format that is not supported for Data Projector
playback. For details about the movie file format supported for Data
Projector playback, see “About the Data Projector’s USB Functions”
for Data Projector playback using software (ArcSoft MediaConverter 3 for
CASIO Projector) included on the CD-ROM that comes with the Data
Projector.
There may be an error in the movie file itself. Open the movie file on your
computer and check it.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Performing a Presentation Using the YC-400/YC-430
Document Camera
This section explains how to connect the CASIO YC-400/YC-430 Multi Projection Camera (document
camera) to the Data Projector in order to project the images of documents placed on the document
stage of the document camera. The Data Projector’s built-in application named YC Camera is used to
project document images.
Important!
A YC-400 document camera can be connected to the Data Projector only if it is running firmware
version 1.1 or higher. Firmware updating software is included on the CD-ROM that comes with
YC Camera Application Function and Operation
Overview
YC Camera is an application built into the Data Projector that makes it possible to control the YC-400/
YC-430 document camera from the Data Projector. With the YC Camera application you can project
the image of documents placed on the document stage of the document camera. Connecting the
document camera to the Data Projector’s USB port and turning on the document camera will cause
the YC Camera application to start up automatically.
Connecting the Document Camera to the Data Projector
This section provides the basic steps you need to perform in order to connect the document camera
to the Data Projector and project the image of documents placed onto the document camera’s
document stage.
Important!
The procedure below assumes that the Data Projector’s plug-and-play feature is turned on
(which is the initial default setting). If you have turned off plug-and-play, turn it back on before
performing the procedure below. For more details about the plug-and-play setting, see “Setup
Menu Contents” in the User’s Guide.
The resolution of recorded images is fixed at 4 megapixels when a YC-400/YC-430 Document
Camera is connected to the Data Projector. The resolution setting cannot be changed in this
case.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
To connect the document camera to the Data Projector and project the
image of a document
1. Turn on the Data Projector.
Wait until the Data Projector’s POWER/STANDBY indicator is lit green.
2. Connect the document camera to the Data Projector using the USB cable that
comes bundled with the document camera.
YC-400/YC-430
Camera
Camera stand
USB cable
Document stage
3. With nothing on the document stage, press the [P] (power) button on the
camera stand.
This will turn on the document camera, which will cause its lens to extend.
The Data Projector will recognize the document camera and start up the YC Camera
application automatically. When the YC Camera application starts up, the Data Projector will
project an image of the document stage along with a dialog box for adjusting the document
camera position.
If the document camera is positioned correctly, position adjustment will end automatically and
the dialog box will close. At this time the monitor screen (the image being picked up by the
document camera) will be projected.
If the document camera is not positioned correctly, a message prompting you to adjust the
document camera position will appear. Follow the instructions shown in the message to adjust
the document camera position.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
4. Place the document whose image you want to project onto the document
camera’s document stage.
Be sure to place the document in the center of the
stage, and do not let any part of the document
extend off the edges of the stage.
When placing a landscape orientation document
onto the document stage, the top of the page
should face towards the camera stand.
Initially the monitor image will be projected, and so
the image will appear a bit fuzzy.
When the document camera senses that the document on the stage is not being moved, it will
record its image and switch from the fuzzy monitor image to a high-resolution image (recorded
image) automatically.
Rough (Monitor) Image
Recorded Image
5. Now you can replace the document currently on the stage with another one.
This will switch to the recorded image of the next document automatically.
Note
Step 5 above is what happens while the Data Projector’s YC Camera application is configured
with its initial default settings. The recorded image will not switch automatically if you have
changed the “Operation Mode” setting of the YC Camera application to “Manual Capture”. For
more information, see “YC Camera Application Setup Menu Contents” on page 48.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
YC Camera Application Operations
This section explains the various types of projection operations you can perform with the YC Camera
application and how to configure YC Camera application settings.
Important!
The procedures in this section assume that you have already connected the Document Camera
to the Data Projector as explained under “Connecting the Document Camera to the Data
Projector” (page 39), and that the Data Projector’s YC Camera application is running.
YC Camera Application Projection Operations
The operations in this section are performed using the YC Camera function menu, which appears
when you press the [FUNC] key while the YC Camera application is running.
Some operations can be performed using the remote controller’s [O], [f], and [Z] keys.
To release the document camera shutter manually
1. Press the [FUNC] key to display the YC Camera application function menu.
The “Camera Shutter” item should be highlighted by default.
2. Press the [ENTER] key to release the document camera shutter.
This will cause the image recorded with the document camera to be projected.
Note
While a rough monitor image or recorded image is projected, you can release the shutter
manually by pressing the [ENTER] key, without pressing the [FUNC] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
To adjust the document camera’s zoom setting
1. Press the [FUNC] key to display the YC Camera application function menu.
2. Use the [] key to move the highlighting to “Camera Zoom/Focus” and then
press the [ENTER] key.
This causes the YC Camera Zoom/Focus dialog box to appear in the projection area. The
“Optical Zoom” item should be highlighted by default.
3. Use the [] and [] keys to adjust the document camera’s zoom setting.
4. After the zoom setting is the way you want, press the [ESC] key.
This will close the YC Camera Zoom/Focus dialog box.
To adjust document focus manually
1. Press the [FUNC] key to display the YC Camera application function menu.
2. Use the [] key to move the highlighting to “Camera Zoom/Focus” and then
press the [ENTER] key.
This causes the YC Camera Zoom/Focus dialog box to appear in the projection area.
3. Press the [] key to move the highlighting to “Focus”.
4. Use the [] and [] keys to adjust the document camera’s focus.
5. After the focus is the way you want, press the [ESC] key.
This will close the YC Camera Zoom/Focus dialog box.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
To adjust the camera position
1. Remove all documents and objects from the document stage.
2. Press the [FUNC] key to display the YC Camera application function menu.
3. Use the [] key to move the highlighting to “Adjust Camera Position” and then
press the [ENTER] key.
This displays the camera position adjustment dialog box.
4. Point the document camera downwards so the lens is pointed towards the
document stage.
Aim the camera as instructed by the text that appears in the projection area.
When the document camera is positioned correctly, position adjustment will end and the
dialog box will close. At this time the monitor screen (the image being picked up by the
document camera) will be projected.
To rotate the currently projected image
1. Press the [FUNC] key to display the YC Camera application function menu.
2. Use the [] key to move the highlighting to “Rotate Right” and then press the
[ENTER] key.
This will rotate the projected image 90 degrees to the right.
Instead of steps 1 and 2 above, you can also rotate the projected image by pressing the [O]
key.
Note
This operation will affect only the image that is currently being projected. The projection image
produced the next time you release the shutter will be projected in accordance with the settings
on the YC Camera Application Setup Menu (page 46).
Download from Www.Somanuals.com. All Manuals Search And Download.
44
To perform white enhancement on the currently projected image
Note
White enhancement causes the background of the projected image to be white enhanced,
which helps to make the text on a document easier to read.
This operation will affect only the image that is currently being projected. The projection image
produced the next time you release the shutter will be projected in accordance with the
settings on the YC Camera Application Setup Menu (page 46).
Important!
You can perform white enhancement only on a projected image that has been skew corrected.
For more information, see the note under “To perform manual skew correction on the currently
1. Press the [FUNC] key to display the YC Camera application function menu.
2. Use the [] key to move the highlighting to “Enhance White” and then press the
[ENTER] key.
This will enhance the white of the projected image.
Instead of steps 1 and 2 above, you can also white enhance the projected image by pressing
the [f] key.
To perform manual skew correction on the currently projected image
Note
Skew correction automatically straightens the image of a document that is misaligned on the
document stage of the document camera. Under its initial defaults, the YC Camera application
is configured to perform skew correction automatically. You can also turn off auto skew
correction. If you do, you can use the following procedure to adjust image alignment manually.
This operation will affect only the image that is currently being projected. The projection image
produced the next time you release the shutter will be projected in accordance with the
settings on the YC Camera Application Setup Menu (page 46).
1. Press the [FUNC] key to display the YC Camera application function menu.
2. Use the [] key to move the highlighting to “Skew Correction” and then press
the [ENTER] key.
This will straighten the projected image.
Instead of steps 1 and 2 above, you can also perform skew correction of the projected image
by pressing the [Z] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Configuring YC Camera Application Setup Menu Settings
You can use the YC Camera setup menu to configure various YC Camera application operation
settings.
To configure YC Camera application setup menu settings
1. Press the [MENU] key to display the setup menu.
2. Press the [] key to move the highlighting to “USB” and then press the [ENTER]
key.
3. Press the [] key once to move the highlighting to “Setup” and then press the
[ENTER] key.
This will display the YC Camera application setup menu.
4. Use the [] and [] keys to select the menu item whose setting you want to
change.
5. Press the [] or [] key to select the setting you want (so its button is 0).
6. Repeat steps 4 and 5 to configure other settings, if you want.
7. After you are finished, press the [ESC] key to exit the setup menu.
Note
Anytime you change the “White Enhancement” or “Skew Correction” setting, the new setting
goes into effect from the next image you record with the document camera after exiting the
setup menu. Other settings go into effect as soon as you exit the setup menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
To restore all settings on the YC Camera application setup menu to their
initial factory defaults
1. Press the [MENU] key to display the setup menu.
2. Press the [] key to move the highlighting to “USB” and then press the [ENTER]
key.
3. Press the [] key once to move the highlighting to “Setup” and then press the
[ENTER] key.
This will display the YC Camera application setup menu.
4. Press the [] key to move the highlighting to “Initialize YC Camera Setup” and
then press the [ENTER] key.
This displays the dialog box shown below.
5. Use the [] key to select “Yes”.
6. To restore all the settings to their initial defaults, press the [ENTER] key.
To exit the operation without doing anything, press the [ESC] key instead of the [ENTER] key.
7. After you are finished, press the [ESC] key to exit the setup menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
YC Camera Application Setup Menu Contents
This section provides detailed explanations of all of the items included on the YC Camera application
setup menu. The initial default setting for each item is indicated by an asterisk (*).
Setting Name
Description
Operation Mode
Specifies whether recording of documents placed on the document stage of the document
camera should be performed automatically or manually.
Auto Capture*:
Automatically records the image of a document whenever it is placed on the document
stage.
Manual Capture:
Requires manual release of the shutter each time a document is placed on the document
stage.
Monitor Screen
Orientation
Switches the monitor screen orientation.
Horizontal*:
Records the document on the document stage horizontally.
Vertical:
Records the document on the document stage vertically.
White Enhancement Specifies whether or not white enhancement should be performed on the projected image.
Off*:
Turns off white enhancement.
On:
Turns on white enhancement.
Auto:
The decision whether or not to perform white enhancement is made automatically in
accordance with the image being recorded.
Important!
White enhancement cannot be performed while the “Skew Correction” setting is
“Off”.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Setting Name
Description
Skew Correction
Specifies whether or not skew correction should be performed automatically on the
projected image.
On*:
Turns on automatic skew correction.
Off:
Turns off automatic skew correction.
Project Document
Monitor Image
Specifies whether or not the camera’s monitor image should be projected when a document
is removed from the document stage.
On*:
Displays the monitor image.
Off:
Does not display the monitor image.
Initialize YC Camera Returns all YC Camera application setup menu items to their initial default settings. For
Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Projecting the Screen Image of a
Graphing Calculator
You can connect a CASIO graphing calculator to the Data Projector using a USB cable and project the
calculator’s screen image with the Data Projector. USB connection of the following CASIO graphing
calculators is supported.
fx-9860G Series
To project the screen image of a graphing calculator
1. Set the graphing calculator up for data communication.
Enter the LINK Mode, and configure the “Wakeup” and “Capture” settings as shown below.
Be sure to configure these communication settings before you connect the calculator to the
Data Projector.
See the user documentation that comes with your calculator for details about configuring
these settings.
2. Turn on the Data Projector.
3. Use the USB cable that came with the graphing calculator to connect it to the
Data Projector as illustrated below.
This will project an image of the graphing calculator from the Data Projector.
USB Cable
* The illustration shows the fx-9860G as an example.
Important!
If an hourglass figure appears in the image projected from the Data Projector when you
connect the calculator, perform some operation on the calculator. This should cause the
hourglass to disappear and enable normal projection.
If the calculator does not operate properly after you connect it to the Data Projector, try
disconnecting the USB cable from the calculator and then reconnecting it. If this does not
correct the problem, disconnect the USB cable from both the Data Projector and the
calculator. Turn the Data Projector off and then back on again, and then re-connect the
calculator.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
MA0912-A
Download from Www.Somanuals.com. All Manuals Search And Download.
|