Casio Electronic Keyboard PX 780M User Manual

ES  
-
PX 780M  
USER’S GUIDE  
GUÍA DEL USUARIO  
Please keep all information for future reference.  
Guarde toda información para tener como referencia futura.  
Safety Precautions  
Before trying to use the Digital Piano, be sure to  
read the separate “Safety Precautions”.  
Precauciones de seguridad  
Antes de intentar usar el piano digital, asegúrese de  
leer las “Precauciones de seguridad” separadas.  
PX780-ES-1A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Assembling the Stand...........................................................................................E-59  
Unpacking.................................................................... E-59  
Assembling the Stand.................................................. E-59  
To connect the cable ................................................... E-62  
To install the music stand ............................................ E-62  
General Guide ..................................E-2  
Other Settings ................................E-44  
Saving Settings and Using Panel Lock.......................... E-4  
Configuring Settings .................................................... E-44  
Returning the Digital Piano to Its  
Factory Default Settings ................................................ E-4  
USB Flash Drive.............................E-48  
Storing Standard Audio Data (WAV Files)  
Power Outlet.....................................E-5  
to a USB Flash Drive ................................................... E-49  
Connecting a USB Flash Drive to and  
Detaching It from the Digital Piano .............................. E-49  
Using an AC Adaptor..................................................... E-5  
Turning Power On or Off ............................................... E-5  
Formatting a USB Flash Drive..................................... E-50  
Saving Digital Piano Data to a USB Flash Drive ......... E-50  
Loading Data from a USB Flash Drive to  
Connections.....................................E-6  
Connecting Headphones............................................... E-6  
Connecting Audio Equipment or an Amplifier................ E-6  
Bundled and Optional Accessories................................ E-7  
Digital Piano Memory................................................... E-51  
Deleting Data from a USB Flash Drive ........................ E-52  
Renaming a USB Flash Drive File............................... E-52  
Playing Back a Song on a USB Flash Drive................ E-53  
Error Messages ........................................................... E-54  
Using Built-in Tones........................E-8  
Selecting a Tone............................................................ E-8  
Layering Two Tones...................................................... E-8  
Splitting the Keyboard between Two Tones.................. E-9  
Using Octave Shift....................................................... E-10  
Adjusting the Brilliance of a Tone................................ E-11  
Adding Reverb to the Tone.......................................... E-11  
Adding the Chorus Effect to the Tone ......................... E-12  
Using the Metronome .................................................. E-12  
Using the Pitch Bend Wheel........................................ E-13  
Using the Digital Piano’s Pedals.................................. E-14  
Playing a Duet ............................................................. E-14  
Connecting to a Computer............E-55  
Minimum Computer System Requirements................. E-55  
Connecting the Digital Piano to Your Computer.......... E-55  
Using MIDI................................................................... E-56  
Transferring Data between the Digital Piano  
and a Computer........................................................... E-56  
Reference........................................E-63  
Troubleshooting........................................................... E-63  
Product Specifications ................................................. E-65  
Operating Precautions................................................. E-67  
Using Auto Accompaniment.........E-16  
Playing an Auto Accompaniment................................. E-16  
Using One-Touch Presets ........................................... E-19  
Using Auto Harmonize................................................. E-19  
Creating Your Own Original Rhythms ......................... E-20  
Appendix.......................................... A-1  
Tone List........................................................................ A-1  
Drum Assignment List.................................................... A-4  
Rhythm List.................................................................... A-5  
Song List........................................................................ A-7  
Music Preset List ........................................................... A-8  
Fingering Guide ........................................................... A-10  
Chord Example List ..................................................... A-11  
Playing Back Built-in Songs.........E-23  
Playing Tone Demo Songs.......................................... E-23  
Playing Back a Specific Music Library Song ............... E-24  
Listening to Songs Loaded  
from an External Source.............................................. E-25  
Playing Back Audio Data Stored  
on a USB Flash Drive.................................................. E-27  
MIDI Implementation Chart  
Music Presets.................................E-28  
Selecting a Music Preset............................................. E-28  
Creating an Original User Preset................................. E-29  
Registering Tone and  
Rhythm Setups ..............................E-33  
Recording Your Keyboard Play....E-35  
Recording to Built-in Song Memory  
(Song Recorder).......................................................... E-35  
Recording or Playing Back Multiple Songs.................. E-36  
Recording to a Specific Track (Part)............................ E-37  
Deleting Data Recorded with the Song Recorder........ E-38  
Re-recording Part of a Recorder Song  
(Punch-in Recording)................................................... E-39  
Recording to a USB Flash Drive (Audio Recorder) ..... E-41  
Company and product names used in this  
manual may be registered trademarks of others.  
E-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
2
3
4
5
6
7
8
9
bk bl bm  
1
bn  
bo bp bq br bs  
bt  
ck  
dt  
cl  
cm cn co cp cq cr  
cs  
ct  
dk dl dm dn do dp  
dq dr ds  
Bottom  
Rear  
eq  
ek  
Front  
en  
eo  
el  
em  
ep  
es  
er  
E-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
This manual uses the numbers and names below to refer to buttons and controllers.  
P (POWER) button  
STRINGS button  
1
2
3
4
5
6
7
8
9
bk  
bl  
bm  
bn  
bo  
bp  
bq  
br  
bs  
bt  
ck  
cp  
cq  
cr  
cs  
ct  
dk  
dl  
dm  
dn  
do  
dp  
dq  
dr  
ds  
dt  
ek  
el  
em  
en  
eo  
ep  
eq  
er  
es  
VOLUME controller  
VARIOUS button  
METRONOME button  
GM TONES button  
SONG RECORDER button  
POPS/DANCE/ROCK button  
JAZZ/EUROPEAN button  
LATIN button  
FUNCTION button  
w/NO, q/YES buttons  
BANK, REVERB button  
REGISTRATION 1/A, CHORUS button  
REGISTRATION 2/B, EXIT button  
REGISTRATION 3/C, u button  
REGISTRATION 4/D, i button  
STORE, ENTER button  
SPLIT, SPLIT POINT button  
WORLD button  
COUNTRY/VARIOUS button  
BALLAD button  
PIANO RHYTHMS button  
USER RHYTHMS button  
RHYTHM, MUSIC LIBRARY button  
INTRO, REPEAT button  
NORMAL/FILL-IN, sREW button  
VARIATION/FILL-IN, dFF button  
SYNCHRO/ENDING, PAUSE button  
START/STOP, PLAY/STOP button  
ACCOMP ON/OFF, PART button  
AUTO HARMONIZE, USB DEVICE MODE button  
AUDIO RECORDER, LOAD/SAVE button  
PITCH BEND wheel  
Pedal connector  
USB flash drive port  
USB port  
LINE OUT R, L/MONO jacks  
LINE IN R, L/MONO jacks  
MIDI OUT/IN terminals  
DC 24V terminal  
TEMPO, RHYTHM EDITOR, MUSIC PRESET  
buttons  
Display  
cl  
cm  
cn  
co  
GRAND PIANO button  
ELEC PIANO button  
ORGAN button  
PHONES jacks  
Power lamp  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
Saving Settings and Using  
Panel Lock  
Your Digital Piano lets you save its current settings,  
and lock its buttons to protect against operation errors.  
For details, see “Setting Backup” (page E-47) and  
“Panel Lock” (page E-47).  
Returning the Digital Piano to  
Its Factory Default Settings  
Perform the following procedure when you want to  
return the Digital Piano’s stored data and settings to  
their initial factory defaults.  
1.  
2.  
Turn off the Digital Piano.  
While holding down both the  
(GM TONES)  
cr  
and  
(FUNCTION) buttons, press the  
cs  
1
(P) button.  
The Digital Piano will turn on and initialize its  
internal system. You will be able to use the Digital  
Piano in a short while.  
NOTE  
See “Turning Power On or Off” (page E-5) for  
information about turning power on and off.  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Outlet  
Your Digital Piano runs on standard household power.  
Be sure to turn off power whenever you are not using  
the Digital Piano.  
Turning Power On or Off  
1.  
Press the  
Piano power.  
(P) button to turn on Digital  
1
Using an AC Adaptor  
Do not touch the keyboard, pedal, or buttons while  
the “Please wait...” message is on the display. Doing  
so will cause malfunction.  
Use only the AC adaptor (JEITA Standard, with unified  
polarity plug) that comes with this Digital Piano. Use  
of a different type of AC adaptor can cause  
malfunction of the Digital Piano.  
Specified AC Adaptor: AD-E24250LW  
Use the supplied power cord to connect the AC  
adaptor as shown in the illustration below.  
Use the Digital Piano’s VOLUME controller ( ) to  
2
adjust the volume.  
DC 24V terminal  
2.  
To turn off the Digital Piano, hold down the  
(P) button until the Digital Piano’s display  
1
Household power outlet  
goes blank.  
NOTE  
Pressing the  
(P) button to turn off power  
1
actually puts the Digital Piano into a standby state.  
Minute amounts of current continue to flow within  
the Digital Piano in the standby state. If you do not  
plan to use the Digital Piano for a long time or if  
there is a lightning storm in your area, be sure to  
unplug the AC adaptor from the power outlet.  
Power cord  
AC adaptor  
• Configuration and type depends on  
your geographic location.  
Note the following important precautions to avoid  
damage to the power cord.  
Auto Power Off  
This Digital Piano is designed to turn off automatically  
to avoid wasting power after no operation is  
performed for a preset amount of time. The Auto  
Power Off trigger time is about four hours.  
You also can use the procedure below to temporarily  
suspend Auto Power Off.  
During Use  
Never pull on the cord with excessive force.  
Never repeatedly pull on the cord.  
Never twist the cord at the base of the plug or  
connector.  
During Movement  
Before moving the Digital Piano, be sure to unplug  
To disable Auto Power Off  
the AC adaptor from the power outlet.  
1.  
2.  
While the Digital Piano is turned on, press the  
(P) button to turn it off.  
During Storage  
Loop and bundle the power cord, but never wind it  
1
around the AC adaptor.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
Digital Piano.  
(P) button to turn on the  
1
IMPORTANT!  
• Never connect the AC adaptor (JEITA Standard,  
with unified polarity plug) that comes with this Digital  
Piano to any other device besides this Digital Piano.  
Doing so creates the risk of malfunction.  
• Make sure the Digital Piano is turned off before  
plugging in or unplugging the AC adaptor.  
• The AC adaptor will become warm to the touch after  
very long use. This is normal and does not indicate  
malfunction.  
Auto Power Off will be disabled at this time.  
NOTE  
Turning off the Digital Piano after performing the  
above steps will re-enable Auto Power Off.  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting Headphones  
Connecting Audio Equipment  
or an Amplifier  
IMPORTANT!  
You can connect audio equipment or a music amplifier  
to the Digital Piano and then play through external  
speakers for more powerful volume and better sound  
quality.  
• Before connecting headphones, be sure to use the  
Digital Piano’s VOLUME controller to turn the  
volume down to a low level. After connecting, you  
can adjust the volume to the level you want.  
• The Digital Piano automatically adjusts sound output  
to optimize for headphones (when headphones are  
connected) or the built-in speakers (when  
IMPORTANT!  
• The Digital Piano automatically adjusts sound output  
to optimize for headphone output (when headphones  
are connected) or built-in speaker output (when  
headphones are not connected). This also will cause  
a change in the output quality from the Digital  
Piano’s LINE OUT R and L/MONO jacks.  
headphones are not connected).  
Front  
PHONES jacks  
• Whenever connecting a device to the Digital Piano,  
first use the VOLUME controller to set the volume to  
a low level. After connecting, you can adjust the  
volume to the level you want.  
• Whenever you connect any device to the Digital  
Piano, be sure to read the user documentation that  
comes with the device.  
Stereo standard plug  
Guitar amplifier  
Connect commercially available headphones to the  
PHONES jacks. Connecting headphones to either of  
the PHONES jacks cuts off output to the speakers,  
which means you can practice even late at night  
without bothering others. To protect your hearing,  
make sure that you do not set the volume level too high  
when using headphones.  
Keyboard amplifier, etc.  
INPUT 1  
INPUT 2  
Standard plug  
Tape recorder,  
MIDI sound source, etc.  
NOTE  
Audio amplifier AUX IN jack, etc.  
Standard jack  
Be sure to push the headphones plug into the  
PHONES jacks as far as it will go. If you don’t, you  
may hear sound from only one side of the  
headphones.  
LEFT (White)  
RIGHT (Red)  
Pin plug  
If the plug of the headphones you are using does not  
match the PHONES jacks, use the applicable  
commercially available adaptor plug.  
If you are using headphones that require an adaptor  
plug, make sure you do not leave the adaptor  
plugged in when you unplug the headphones. If you  
do, nothing will sound from the speakers when you  
play.  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Playing Output from External Equipment  
Bundled and Optional  
Accessories  
Use only accessories that are specified for use with this  
Digital Piano.  
through the Digital Piano’s Speakers  
1
Use commercially available cables to connect the  
external audio equipment to the Digital Piano’s  
LINE IN jacks as shown in Figure  
.
1
LINE IN R jack input sounds through the Digital  
Use of unauthorized accessories creates the risk of fire,  
electric shock, and personal injury.  
Piano’s right speaker, while LINE IN L/MONO jack  
input sounds through the left speaker. Connecting to  
the LINE IN L/MONO jack only causes the same  
output to be produced from both speakers. It is up to  
you to purchase connecting cables that are compatible  
with the equipment you are connecting.  
NOTE  
You can get information about accessories that are  
sold separately for this product from the CASIO  
catalog available from your retailer, and from the  
CASIO website at the following URL.  
Connecting to Audio Equipment  
2
Use commercially available cables to connect the  
external audio equipment to the Digital Piano’s  
LINE OUT jacks as shown in Figure . LINE OUT R  
2
jack output is right channel sound, while LINE OUT  
L/MONO jack output is left channel sound. It is up to  
you to purchase connecting cables like the ones shown  
in the illustration for connection of audio equipment.  
Normally in this configuration you must set the audio  
equipment’s input selector to the setting that specifies  
the terminal (such as AUX IN) to which the Digital  
Piano is connected. Use the Digital Piano’s VOLUME  
controller to adjust the volume level.  
Connecting to a Musical Instrument  
Amplifier  
3
Use commercially available cables to connect the  
amplifier to the Digital Piano’s LINE OUT jacks as  
shown in Figure . LINE OUT R jack output is right  
3
channel sound, while LINE OUT L/MONO jack  
output is left channel sound. Connecting to the  
LINE OUT L/MONO jack only outputs a mixture of  
both channels. It is up to you to purchase connecting  
cable like the one shown in the illustration for  
connection of the amplifier. Use the Digital Piano’s  
VOLUME controller to adjust the volume level.  
IMPORTANT!  
• When using the LINE OUT jacks, also connect  
headphones to the PHONES jacks. This will switch  
the LINE OUT output to appropriate sound quality.  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Built-in Tones  
3
cm cn co cp cq cr cs ct  
bn  
bt  
ck  
dk dl  
dn do dp dq  
NOTE  
Selecting a Tone  
Pressing q and w at the same time will jump to  
tone 001 of the currently selected group. Holding  
down either button changes the tone number at high  
speed.  
Your Digital Piano has 250 tones, divided into six  
groups.  
For more information, see the “Tone List” (page  
A-1).  
See page E-44 for more information about scrolling.  
The Digital Piano has built-in demonstration tunes  
that highlight the different characteristics of tones.  
For more information, see “Playing Tone Demo  
Songs” (page E-23).  
Layering Two Tones  
You can layer two different tones so they play at the  
same time when you press a keyboard key.  
The first tone you select is called the “main tone”,  
while the second tone is called the “layered tone”.  
1.  
Use the “Tone List” (page A-1) to look up the  
group and the number of the tone you want to  
select.  
1.  
Select the main tone.  
2.  
Use the  
select the group you want.  
to  
(tone groups) buttons to  
cm cr  
Example: To select GRAND PIANO MELLOW in the  
GRAND PIANO group, press the  
cm  
Example: To select the ORGAN group  
(GRAND PIANO) button and then use the  
(w, q) buttons to select “006 GRAND  
ct  
Lit  
PIANO MELLOW”.  
3.  
Use the  
tone you want.  
(w, q) buttons to select the  
ct  
Example: To select “002 Jazz Organ”  
Tone number  
Tone name  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Built-in Tones  
2.  
Hold down the button of the group that  
contains the tone you want to select as the  
layered tone until “LAYER ON” appears on  
the display as shown below for a few  
moments.  
Splitting the Keyboard  
between Two Tones  
You can split the keyboard so the left side (lower  
range) plays one tone and the right side (upper range)  
plays a different tone.  
Example: To split the keyboard between the GM SLAP  
BASS 1 tone on the left (lower range) and the  
GRAND PIANO CONCERT tone on the right  
(upper range).  
This will layer the tones currently selected in the two  
groups.  
Left (Lower Range)  
Right (Upper Range)  
Tone: GM SLAP BASS 1 Tone: GRAND PIANO CONCERT  
The button you held down in step 2 will light to  
indicate that it is selected.  
Example: When VARIOUS group is selected  
1.  
2.  
Press the  
(SPLIT) button.  
dq  
Lit  
This causes the SPLIT lamp to light, indicating that the  
keyboard is split between two tones.  
Lit  
3.  
4.  
Use the  
(w, q) buttons to select the  
ct  
tone you want in the group you selected in  
step 2.  
Select the tone you want to assign to the left  
side (lower range) of the keyboard.  
Example: When “006 Picked Bass” is selected  
Layered tone number  
Layered tone name  
Example: To select GM SLAP BASS 1 in the GM TONES  
group, press the  
(GM TONES) button and  
cr  
then use the  
(w, q) buttons to select  
ct  
“037 GM SLAP BASS 1”.  
Lit  
Left tone number  
Left tone name  
To unlayer the tones and return the keyboard  
to a single tone, press any one of the tone  
group buttons.  
NOTE  
You can adjust the balance between the main tone  
and layered tone. For details, see “Layered Tone  
Volume (Layer Balance)” (page E-45).  
3.  
To unsplit the keyboard and return it to a  
single tone, press the (SPLIT) button.  
dq  
The SPLIT lamp will go out, indicating that the  
keyboard is no longer split.  
NOTE  
If the keyboard is set up with layered tones (page  
E-8) when you perform the above split operation,  
the layered tones will play on the right (upper  
range) side of the keyboard.  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Built-in Tones  
Moving the Keyboard Split Point  
Using Octave Shift  
You can use the procedure below to specify the  
location on the keyboard where it splits between the  
left side and the right side. That location is called the  
“split point”.  
After you split the keyboard (page E-9), you may find  
out that the lower range notes on the left are too low or  
that the upper range notes on the right are too high.  
You can use octave shift to shift the octaves of the  
upper range and lower range upwards or downwards  
in octave units.  
Left (Lower Range) side  
Right (Upper Range) side  
1.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
(GRAND PIANO) button.  
cm  
This displays the octave shift screen.  
Split point  
1.  
Hold down the  
split point setting screen appears on the  
display as shown below.  
(SPLIT) button until the  
dq  
Currently selected range  
Shift amount  
2.  
Use the  
(PART) button to select the range  
bt  
whose octave you want to change.  
Each press of  
below.  
(PART) cycles through the ranges  
bt  
Current split point key name  
2.  
3.  
Press the keyboard key where you want to  
specify as the leftmost key of the right (upper  
range) tone.  
U1 (Upper1): Main tone  
U2 (Upper2): Layered tone  
L1 (Lower1): Left (lower range) tone  
This specifies the split point.  
Press the  
(SPLIT) button.  
dq  
This exits the split point screen.  
3.  
4.  
Use the  
(w, q) buttons to shift the  
ct  
octave of the currently selected range.  
You can shift the octave within the range of –2 to 0 to  
2.  
Press the  
This exits the octave shift screen.  
(FUNCTION) button.  
cs  
NOTE  
Octave shift also can be performed as described for  
“Octave Shift” (page E-45).  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Built-in Tones  
Adjusting the Brilliance of a  
Tone  
Adding Reverb to the Tone  
1.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
(REVERB) button.  
dk  
1.  
Press the  
(FUNCTION) button.  
cs  
This will display a reverb type selection screen.  
The FUNCTION lamp will light and the function screen  
will appear on the display.  
Lit  
2.  
Use the  
the Tmpr/Effect screen.  
(i) and  
(u) buttons to select  
dn  
do  
2.  
3.  
Use the  
reverb type you want.  
The following shows the five available reverb type  
settings.  
(w, q) buttons to select the  
ct  
0: OFF (no reverb)  
1: Room  
2: Hall  
3: Large Hall  
4: Stadium  
3.  
4.  
Press the  
(ENTER) button.  
dp  
This will display a screen for selecting settings in the  
Tmpr/Effect group.  
Press the  
This exits the reverb type selection screen.  
(FUNCTION) button.  
cs  
Use the  
(i) or  
(u) button to select  
dn  
do  
the brilliance screen shown below.  
5.  
6.  
Use the  
(w, q) buttons to adjust the  
ct  
brilliance of the currently selected tone. You  
can adjust brilliance in the range of –3 to 0 to 3.  
w: Mellower and softer  
q: Brighter and harder  
Press the  
(FUNCTION) button.  
cs  
This will exit the brilliance screen and cause the  
FUNCTION lamp to go out.  
NOTE  
See “Other Settings” (page E-44) for details about  
using the (FUNCTION) button.  
cs  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Built-in Tones  
Adding the Chorus Effect to  
the Tone  
Using the Metronome  
1.  
Press the  
This will start the metronome.  
(METRONOME) button.  
3
1.  
2.  
3.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
This will display a chorus type selection screen.  
(CHORUS) button.  
dl  
Lights with the first beat  
of each measure  
Lights with each  
subsequent beat of  
each measure  
Use the  
(w, q) buttons to select the  
ct  
2.  
Press the  
(METRONOME) button again to  
3
chorus type you want.  
The following shows the five available chorus type  
settings.  
stop the metronome.  
Changing the Beats Per Measure  
0: OFF (no chorus)  
1: Light Chorus  
2: Chorus  
3: Deep Chorus  
4: Flanger  
You can specify from two to six beats per measure for  
the metronome. After you do, a chime will sound at the  
beginning of each measure. Specifying 0 for this setting  
will sound a straight beat, without a chime. This setting  
lets you practice with a steady beat.  
Press the  
(FUNCTION) button.  
cs  
This exits the chorus type selection screen.  
1.  
Hold down the  
(METRONOME) button  
3
until the number of beats per measure screen  
shown below appears on the display.  
2.  
3.  
Use the  
(w, q) buttons to select the  
ct  
beats per measure value you want.  
Press the (METRONOME) button to exit  
the number of beats per measure screen.  
3
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Built-in Tones  
Changing the Tempo Setting  
Adjusting the Metronome Volume  
There are two different methods you can use to change  
You can use the following procedure to adjust the  
volume level of the metronome, without affecting the  
volume of Digital Piano output.  
the tempo setting: by pressing  
(q) (faster) and  
ck  
ck  
(w) (slower) buttons or by tapping a beat with a  
button.  
1.  
While holding down the  
(FUNCTION)  
cs  
To adjust the tempo using  
(TEMPO, w,  
ck  
button, press the  
(METRONOME) button.  
3
q) buttons  
This displays the metronome volume screen.  
1.  
Use the  
adjust the tempo setting.  
(TEMPO, w, q) buttons to  
ck  
Each press of a button increases or decreases the beats  
per minute value by one.  
Holding down either button changes the value at  
high speed.  
You can specify a tempo value in the range of 20 to  
255.  
Metronome volume  
2.  
3.  
Use the  
metronome volume.  
(w, q) buttons to adjust the  
ct  
Press the (FUNCTION) button.  
This will exit the metronome volume screen and cause  
the FUNCTION lamp to go out.  
cs  
Tempo value  
NOTE  
You also can use the procedure under “Metronome  
Volume” (page E-45) to adjust the metronome  
volume.  
To adjust the tempo by tapping a beat  
Tap the (TEMPO, TAP) button four times  
1.  
ck  
in time with the beat you want to specify.  
Using the Pitch Bend Wheel  
The tempo setting will change in accordance with the  
timing of your tapping.  
You can use the pitch bend wheel to slide the pitch of  
notes smoothly upwards and downwards. This  
capability makes it possible to reproduce saxophone  
and electric guitar choking effects.  
Tap four times  
Adding a Pitch Bend Effect  
After you use this method to specify the approximate  
tempo, you can then use the procedure under “To  
1.  
While playing a note on the  
keyboard, rotate the pitch bend  
wheel on the left of the keyboard  
upwards or downwards.  
adjust the tempo using  
(TEMPO, w, q)  
ck  
buttons” to adjust the setting to a more exact value.  
The amount the note bends depends on  
how much you rotate the pitch bend  
wheel.  
Do not have the pitch bend wheel  
rotated as you turn on the Digital Piano.  
NOTE  
You also can configure pitch bend wheel operation  
by specifying the amount of pitch change at  
maximum rotation in either direction. See “Pitch  
Bend Range” (page E-47) for more information.  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Built-in Tones  
Using the Digital Piano’s  
Pedals  
Your Digital Piano comes equipped with three pedals:  
damper, soft, and sostenuto.  
Playing a Duet  
You can use the Duet Mode to split the Digital Piano’s  
keyboard in the center so two people can play a duet.  
This makes it possible to configure the keyboard so, for  
example, the teacher can play on the left and the  
student can follow along on the right. Or one person  
can play the left hand part on the left, while another  
plays the right hand part on the right.  
Left keyboard  
Right keyboard  
Soft pedal  
Damper pedal  
Sostenuto pedal  
C3  
C4  
C5  
C6  
C3  
C4  
C5  
C6  
(Middle C)  
(Middle C)  
Pedal Functions  
Configuring the Digital Piano for Duet  
Play  
z Damper Pedal  
Pressing the damper pedal while playing will cause the  
notes you play to reverberate for a very long time.  
When a GRAND PIANO tone (tone numbers 001  
through 012) is selected as the tone, pressing this  
pedal will cause notes to reverberate (Damper  
Resonance) just like the damper pedal on an acoustic  
grand piano. Half-pedal operation (pressing the  
pedal part way) is also supported.  
1.  
Press the  
lower lamp is lit.  
(MUSIC LIBRARY) button so its  
bn  
z Soft Pedal  
Lit  
Pressing this pedal while playing suppresses notes  
played on the keyboard after the pedal was pressed,  
and makes them sound softer.  
2.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
(SPLIT) button.  
dq  
z Sostenuto Pedal  
This causes the Duet Mode on/off screen to appear.  
The keyboard keys are disabled while this screen is  
displayed.  
Only the notes of the keys that are depressed when this  
pedal is pressed are sustained until the pedal is  
released.  
3.  
Press the  
Mode.  
(q) button to turn on the Duet  
ct  
This will cause the  
(SPLIT) button lamp to flash.  
dq  
4.  
5.  
Press the  
cs  
This exits the Duet mode on/off screen and configures  
the Digital Piano’s keyboard for duet play.  
(FUNCTION) button.  
To turn off the Duet Mode, press the  
(SPLIT) button so the SPLIT lamp goes out.  
dq  
NOTE  
You also can use the procedure under “Duet Mode”  
(page E-45) to turn the Duet Mode on or off.  
E-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Built-in Tones  
Changing the Octave of a Duet Mode  
Keyboard  
You can use the following procedure to change the  
octave of the left and right Duet Mode keyboards.  
1.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
(SPLIT) button.  
dq  
This displays the Duet Mode on/off screen shown in  
step 2 under “Configuring the Digital Piano for Duet  
Play” (page E-14). If the Duet Mode is currently turned  
off, press the  
(q) button to turn it on.  
ct  
2.  
Of the four C keys in the left keyboard, press  
the one that you want to have located at  
middle C.  
This will sound the note assigned to C4 and change  
the octave of the left keyboard.  
Example: To change the configuration so the leftmost C  
key is middle C as shown below.  
Leftmost C key (Pressed key)  
C4  
C5  
C6  
C7  
C3  
C4  
C5  
C6  
1 octave higher than initial setting  
Unchanged  
3.  
4.  
You can use the same procedure as step 2 to  
select one of the C keys in the right keyboard  
to shift its octave as well.  
Press the  
(FUNCTION) button.  
cs  
This exits the Duet Mode on/off screen and causes the  
(FUNCTION) button lamp to go out.  
cs  
The left and right keyboards will be configured  
according to your settings.  
NOTE  
Turning off the Duet Mode will clear your octave  
shift settings and return the keyboard to its initial  
default settings.  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Auto Accompaniment  
5 6 7 8 9 bk bl bm  
cm cn co cp  
cs ct  
bn bo bp bq br bs bt  
ck  
dm dn do dp  
dr  
With Auto Accompaniment, simply select the  
4.  
Use the  
rhythm you want.  
(w, q) buttons to select the  
ct  
accompaniment rhythm you want and the matching  
accompaniment (drums, guitar, etc.) will play  
automatically when you play a chord with your left  
hand. It’s like having your own personal backup group  
along with you wherever you go.  
Example: When “005 Samba 2” is selected  
This Digital Piano has 180 built-in Auto  
Accompaniment patterns, which are divided into  
seven groups. You can edit built-in rhythms to create  
your own original rhythms (called “user rhythms”),  
which you can save in a eighth group. For more  
information, see the “Rhythm List” (page A-5).  
Rhythm name  
Tempo  
Rhythm number  
Measure  
5.  
Use the  
adjust the tempo setting.  
This is the same as metronome tempo adjustment  
(page E-12).  
(TEMPO, w, q) buttons to  
ck  
Playing an Auto  
Accompaniment  
1.  
Press the  
lamp is lit.  
(RHYTHM) button so its upper  
To return the rhythm to its standard tempo setting,  
bn  
press the  
time.  
(TEMPO, w, q) buttons at the same  
ck  
This enables Auto Accompaniment.  
Each press of the button toggles between the  
RHYTHM and MUSIC LIBRARY lamps.  
Lit  
2.  
3.  
Use the “Rhythm List” (page A-5) to look up  
the group and the number of the rhythm you  
want to select.  
Use the  
to  
(rhythm groups) buttons to  
bm  
5
select the group you want.  
Example: When the LATIN group is selected  
Lit  
E-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Auto Accompaniment  
6.  
7.  
Press the  
its lamp is lit.  
This turns ACCOMP on, so all accompaniment parts  
sound.  
Turning ACCOMP off so the ACCOMP lamp is unlit  
causes only the percussion instrument parts to sound.  
(ACCOMP ON/OFF) button so  
9.  
Play other chords with left hand as you play  
the melody with your right hand.  
You can use “CASIO Chord” or other simplified  
chord fingering modes to play chords. For details, see  
“Selecting a Chord Fingering Mode” in the following  
section.  
bt  
You can use the  
(NORMAL) and  
Each press of the  
toggles ACCOMP on and off.  
(ACCOMP ON/OFF) button  
bp  
bq  
bt  
(VARIATION) buttons to modify accompaniment  
patterns. For details, see “Modifying Auto  
Accompaniment Patterns” (page E-19).  
Lit  
10. When you are finished, press the  
STOP) button again to stop Auto  
Accompaniment.  
(START/  
bs  
Pressing the  
(SYNCHRO/ENDING) button  
br  
Press the  
(SYNCHRO/ENDING) button.  
br  
instead of the  
(START/STOP) button will play an  
bs  
ending pattern before stopping Auto  
Accompaniment play. For details about ending  
patterns, see “Modifying Auto Accompaniment  
Patterns” (page E-19).  
This puts Auto Accompaniment into “synchro  
standby”. Playing a chord during synchro standby will  
cause Auto Accompaniment to start to play  
automatically.  
Pressing the  
Accompaniment is in synchro standby will enter  
intro standby. Pressing the (VARIATION) button  
(INTRO) button while Auto  
bo  
NOTE  
bq  
You can use the following procedure to adjust the  
volume level of the Auto Accompaniment, without  
affecting the volume of Digital Piano output. For  
details, see “Auto Accompaniment Volume” (page  
E-45).  
will enter variation standby. For details about intro  
and variation patterns, see “Modifying Auto  
Accompaniment Patterns” (page E-19).  
Flashing  
You can change the size of the chord keyboard by  
using the split feature to move the split point (page  
E-10). The keyboard keys to the left of the split point  
make up the chord keyboard.  
8.  
Play the chord you want on the chord  
keyboard (left keyboard keys).  
Auto Accompaniment will start playing when you play  
the chord.  
To start percussion part play without playing a  
chord, press the  
(START/STOP) button.  
bs  
Example: To play a C chord  
Chord keyboard  
Melody keyboard  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Auto Accompaniment  
CASIO CHORD  
Selecting a Chord Fingering Mode  
With “CASIO Chord”, you can use simplified  
fingerings to play the four types of chords described  
below.  
You can select from among the following five chord  
fingering modes.  
1: Fingered 1  
2: Fingered 2  
3: Fingered 3  
4: CASIO Chord  
5: Full Range  
Chord keyboard  
Chord Type  
Example  
1.  
Hold down the  
until the chord type selection screen appears  
on the display.  
(ACCOMP ON/OFF) button  
bt  
Major Chords  
C (C Major)  
CC#DEb E  
F
F#GAbABb  
B
CC#DEb E  
F
Press one key, whose note  
corresponds to the chord  
name.  
Note name  
• To play C Major, press any  
C key in the chord  
keyboard. The octave of the  
note does not matter.  
Minor Chords  
Cm (C minor)  
CC#DEb E  
F
F#GAbABb  
B
CC#DEb E  
F
Press the chord keyboard key  
that corresponds to the major  
chord, while also pressing one  
other chord keyboard key to  
the right.  
Chord fingering mode  
2.  
3.  
Use the  
(w, q) buttons to select the  
ct  
chord fingering mode you want.  
Seventh Chords  
C7 (C seventh)  
CC#DEb E  
F#GAbABb  
F
B
CC#DEb E  
F
Press the chord keyboard key  
that corresponds to the major  
chord, while also pressing  
two other chord keyboard  
keys to the right.  
Press the (ACCOMP ON/OFF) button.  
This exits the chord fingering screen.  
bt  
Fingered 1, 2, 3  
With these three chord fingering modes, you play  
chords on the chord keyboard using their normal  
chord fingerings. Some chord forms are abbreviated,  
and can be fingered with one or two keys.  
For information about the types of chords you can  
finger and their fingerings, see the “Fingering Guide”  
(page A-10).  
Minor Seventh Chords  
Press the chord keyboard key  
that corresponds to the major  
chord, while also pressing  
three other chord keyboard  
keys to the right.  
Cm7 (C minor seventh)  
CC#DEb E CC#DEb E  
F#GAbABb  
F
B
F
When pressing more than one chord keyboard key,  
makes no difference whether the additional keys are  
white or black.  
Chord keyboard  
FULL RANGE CHORD  
With this chord fingering mode, you can use the full  
range of the keyboard to play chords and the melody.  
For information about the types of chords you can  
finger and their fingerings, see the “Fingering Guide”  
(page A-10).  
Fingered 1: Play the component notes of the chord on the  
keyboard.  
Fingered 2: Unlike Fingered 1, 6th input is not possible with  
this mode.  
Fingered 3: Unlike Fingered 1, this mode allows input of  
fraction chords with the lowest keyboard note as  
the bass note.  
Melody keyboard  
Chord keyboard  
E-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Auto Accompaniment  
Modifying Auto Accompaniment Patterns  
Using One-Touch Presets  
One-Touch Preset gives you one-touch access to tone  
and tempo settings that go well with the currently  
selected Auto Accompaniment rhythm pattern.  
There are six different Auto Accompaniment patterns,  
shown below. You can switch between patterns during  
accompaniment play and even modify patterns. Use  
buttons  
through  
to select the pattern you want.  
bo  
br  
bo  
bp  
bq  
br  
1.  
Hold down the  
least two seconds.  
(RHYTHM) button for at  
bn  
This will configure tone, tempo, and other settings to  
match the currently selected rhythm pattern. At this  
time, Auto Accompaniment play also will go into  
synchro standby, which means that Auto  
Accompaniment will start to play automatically when  
you finger a chord.  
Intro *1  
Normal  
Variation  
Ending *4  
2.  
Play a chord on the keyboard.  
This will start Auto Accompaniment play.  
Normal fill-in *2  
Variation fill-in *3  
*1 Press at the beginning of a song.  
NOTE  
Accompaniment play proceeds with the normal  
One-Touch Presets are not supported for user  
rhythms (001 through 010 of the USER RHYTHMS  
group).  
pattern after the intro pattern is complete. Pressing  
the  
(VARIATION/FILL-IN) button before  
bq  
pressing this button will proceed with the variation  
pattern after the intro pattern is complete.  
*2 Press while a normal pattern is playing to insert a  
fill-in pattern.  
Using Auto Harmonize  
*3 Press while a variation pattern is playing to insert a  
fill-in variation pattern.  
*4 Press at the end of a song.  
Auto Harmonize lets you add harmony to melody  
notes you play with your right hand. You can select  
any one of 12 Auto Harmonize settings.  
This will play an ending pattern and then stop Auto  
Accompaniment.  
1.  
Press the  
(AUTO HARMONIZE) button.  
dr  
Type number  
Type name  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Auto Accompaniment  
2.  
Use the  
(w, q) buttons to select the  
ct  
Creating Your Own Original  
Rhythms  
You can use rhythm editing to modify a built-in Auto  
Accompaniment rhythm to create an original “user  
rhythm” of your own. You can select a part (drum,  
bass, etc.) of a normal, intro, or other pattern (page  
E-19) and turn it on or off, adjust its volume level, and  
perform other operations.  
Auto Harmonize type you want.  
Type  
Number  
Type Name  
Off  
Description  
00  
Turns off Auto Harmonize.  
Adds close (separated by two to  
four degrees) one-note harmony  
below the melody note.  
01  
Duet 1  
Adds open (separated by more  
than 4 to 6 degrees) 1-note  
harmony below the melody  
note.  
02  
Duet 2  
1.  
2.  
Select the number of the Auto  
Accompaniment rhythm you want to edit.  
03  
04  
05  
06  
Country  
Octave  
Adds country style harmony.  
At the same time, press the  
(FUNCTION)  
cs  
Adds the note from the next  
lower octave.  
and  
(RHYTHM EDITOR) buttons.  
ck  
This displays the rhythm editor screen.  
5th  
Adds the fifth degree note.  
Adds 2-note open harmony, for  
a total of three notes.  
3-Way Open  
Adds 2-note close harmony, for  
a total of three notes.  
07  
08  
09  
10  
3-Way Close  
Strings  
Adds harmony that is optimal  
for strings.  
Adds 3-note open harmony, for  
a total of four notes.  
4-Way Open  
4-Way Close  
3.  
Use the accompaniment pattern buttons (  
bo  
through ) to select the pattern (normal,  
br  
Adds 3-note close harmony, for  
a total of four notes.  
intro, ending, etc.) you want to edit.  
The button you press will light, indicating that the  
pattern is being edited.  
11  
12  
Block  
Adds block chord notes.  
Big Band  
Adds big band style harmony.  
Each press of  
(NORMAL/FILL-IN) toggles  
bp  
between NORMAL and FILL-IN, and each press of  
(VARIATION/FILL-IN) toggles between  
VARIATION and FILL-IN. The applicable button  
flashes while the fill-in pattern is selected.  
3.  
4.  
Press the  
This will exit the auto harmonize screen.  
(AUTO HARMONIZE) button.  
dr  
bq  
Example: When intro is selected  
While playing chords, play the melody on the  
keyboard.  
bo  
bp  
bq  
br  
Harmony will be added to your melody notes based on  
the chords you play.  
E-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Auto Accompaniment  
4.  
Use the instrument part buttons ( through  
5
Shortcut  
Button  
Parameter Description  
Replaces the part  
Setting  
) to select the part (drums, bass etc.) you  
bm  
want to edit.  
(drum, bass, etc.)  
accompaniment  
data with that of  
the specified  
The name of the part you select will appear on the  
display. Rhythm patterns are made up of the eight parts  
shown below.  
Rhythm  
Select:  
Rhythm  
001 to 190:  
Rhythm  
cm  
cn  
number *2 *3  
Button illumination does not change when you press  
rhythm number. *1  
the instrument part buttons ( through ). Button  
5
bm  
illumination indicates whether there is  
accompaniment data corresponding to each part.  
Switches the part  
tone (instrument)  
to that of the  
specified tone  
number.  
Tone  
Select:  
Tone  
001 to 250: Tone  
Numbers *2 *4  
Parts  
Drums Percus-  
sion  
Bass  
Chord 1 Chord 2 Chord 3 Chord 4 Chord 5  
OFF:  
Prt:  
Part on/  
off  
Mutes the part.  
ON:  
Sounds the  
part.  
Toggles each part  
on or off.  
5
6
7
8
9
bk  
bl  
bm  
Example: When bass is selected  
Vol:  
Volume  
level  
Controls the  
volume level of  
each part.  
000 to 127  
co  
Controls whether  
the sound of the  
part can be heard  
Pan:  
Panning  
–64 to 0 to 63 *5  
(position) from the left side or  
right side.  
Instrument part name  
Controls the level  
Reverb:  
Reverb  
of the reverb effect  
(page E-11) applied  
to the part notes.  
5.  
Edit the selected part as desired.  
000 to 127  
000 to 127  
The table below describes the parameters you can edit.  
Use the (u) and (i) buttons to select a  
cp  
dn  
do  
Controls the level  
of the chorus effect  
(page E-12) applied  
to the part notes.  
parameter, and the  
(w, q) buttons to change its  
ct  
Chorus:  
Chorus  
setting. You also can use shortcut buttons (see table  
below) to select parameters.  
Pressing the  
(w, q) buttons at the same time  
ct  
will return the currently selected parameter to its  
initial default setting.  
*1 Replacing part accompaniment data clears all edits to the  
currently selected accompaniment data made up to that  
point.  
*2 Sequential numbers starting from 001, which is the first  
rhythm of the first group (POPS/DANCE/ROCK). See  
the “Tone List” (page A-1) and “Rhythm List” (page A-5)  
for information on the numbering system.  
Pressing the  
(START/STOP) button during an  
bs  
edit operation will sound the accompaniment pattern  
with the edits you have made up to that point.  
Pressing the  
(ACCOMP ON/OFF) button will  
bt  
sound only the instrument part you are editing.  
*3 In the case of the intro and ending, specifying a rhythm  
for one part (drum, bass, etc.) will cause the same rhythm  
to be specified automatically for all of the other parts of  
the pattern.  
Procedure continues on page E-22.  
*4 Only drum set sounds (tone numbers 237 through 250)  
can be selected for drum parts and percussion parts.  
Drum set sounds cannot be selected for the bass and the  
chord 1 through chord 5 parts.  
*5 A smaller value shifts leftward, while a larger value shifts  
rightward. A value of zero specifies center.  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Auto Accompaniment  
6.  
Repeat steps 3 through 5 to edit all of the  
accompaniment patterns and parts you want.  
10. Decide on the user rhythm number where you  
want to save the rhythm and a rhythm name.  
Use the  
(u) and  
(i) buttons to move the  
do  
dn  
7.  
After editing is complete, adjust the tempo of  
the rhythm as desired.  
The tempo you set here becomes the initial default  
tempo of the rhythm.  
cursor to the user rhythm number and rhythm name  
character you want to change. Use the (w, q)  
buttons to select the number or character you want.  
The rhythm name characters you can select are  
shown below. To input a space, press both of the  
ct  
ct  
(w and q) buttons at the same time.  
8.  
Press the  
(EXIT) button.  
dm  
This causes a confirmation message to appear asking if  
you want to save your edits.  
9.  
Press the  
(YES) button.  
ct  
This displays a screen for specifying the user rhythm  
number and rhythm name.  
If you want to exit the editing operation without  
saving, press the  
(YES) button.  
(NO) button instead of the  
ct  
ct  
11. Press the  
(ENTER) button.  
dp  
This saves the data.  
If the rhythm number where you are saving the data  
already has data saved to it, a message (Replace?) will  
appear on the display to confirm whether you want  
to replace the existing data with the new data.  
IMPORTANT!  
• Saving user rhythm data to a user rhythm number  
that already has data will cause the existing data to  
be replaced by the new data.  
Rhythm name  
Destination user rhythm number  
NOTE  
If the size of the accompaniment pattern or  
instrument part data is too large to be edited, a  
memory full message (Memory Full) will appear on  
the display. If that happens, select a different  
accompaniment pattern or instrument part for  
editing.  
E-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back Built-in Songs  
bl bm  
cs ct  
bn bo bp bq br bs bt  
ck  
dl dm dn do dp  
ds  
Playing Tone Demo Songs  
Your Digital Piano comes with six built-in demo tunes,  
which demonstrate the characteristics of each of the six  
tone groups.  
No.  
Tone Group Name  
Tune Name  
Song number  
Current measure  
Song tempo  
Piano Concert No.1 Op.23  
1st Mov. (P.I.Tchaikovsky)  
001 GRAND PIANO  
Song name  
002 ELEC PIANO  
003 ORGAN  
Original  
Pressing a tone group button ( through ) while  
demo song playback is in progress will switch to the  
demo song of that group’s tone. Also, you can scroll  
cm  
cr  
Original  
004 STRINGS  
005 VARIOUS  
006 GM TONES  
Nessun Dorma [Turandot]  
Original  
through songs manually with the  
buttons.  
(w, q)  
ct  
Original  
2.  
Press the  
(PLAY/STOP) button.  
bs  
This stops demo song playback.  
Playback of the demo songs will continue in an endless  
1.  
While holding down the  
(PART) button,  
bt  
press the  
(PLAY/STOP) button.  
bs  
loop until you press the  
stop it.  
(PLAY/STOP) button to  
bs  
This will start sequential playback from the demo song 1,  
up to the last Music Library song 60.  
NOTE  
Only the operations described above can be  
performed while demo song playback is in progress.  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back Built-in Songs  
5.  
Press the  
This starts playback of the song.  
Press the (FF) button to perform a fast forward  
operation or the  
(PLAY/STOP) button.  
bs  
Playing Back a Specific Music  
Library Song  
bq  
(REW) button for rewind.  
bp  
You can use the procedure below to select a Music  
Library song for listening or practice.  
Pressing and releasing either button moves one  
measure, while holding down a button scrolls at high  
speed.  
Pressing the  
Press again to resume song playback.  
(PAUSE) button pauses playback.  
br  
1.  
Press the  
lamp is lit.  
(MUSIC LIBRARY) button so its  
bn  
Lights with each subsequent beat of each measure  
Lights with the first beat of each measure  
Each press of the button toggles between the upper  
and lower lamps.  
bo  
bp  
bq  
br  
bs  
Lit  
Rewind  
Pause  
Fast forward  
2.  
3.  
In the “Song List” (page A-7), find the group  
and group number of the song you want.  
User songs are in Group D.  
6.  
Press the  
This stops song playback.  
Song playback also will stop automatically when the  
end of the song is reached. To configure the Digital  
Piano to loop song playback without stopping, turn  
on “Song Repeat” (page E-46).  
(PLAY/STOP) button again.  
bs  
Use the  
to  
(Song group A to D) buttons  
dl do  
to select the group you want.  
Press button  
(Group D) if you want to select a user  
do  
song.  
Example: When Group B is selected  
dl  
dm  
dn  
do  
Lit  
4.  
Use the  
song you want.  
(w, q) buttons to select the  
ct  
Example: When “008 Gavotte” is selected  
Song number  
Song name  
E-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back Built-in Songs  
4.  
Press the  
This starts playback of the song.  
Press the (FF) button to perform a fast forward  
operation or the  
(PLAY/STOP) button.  
bs  
Listening to Songs Loaded  
from an External Source  
bq  
(REW) button for rewind.  
bp  
You can import song data from a commercially  
available USB flash drive or computer as a user song,  
and use it for Auto Accompaniment or for practice.  
Pressing and releasing either button moves one  
measure, while holding down a button scrolls at high  
speed.  
Pressing the  
(PAUSE) button pauses playback.  
br  
Press again to resume song playback.  
1.  
Load the song data you want to listen to one  
of the Digital Piano’s user songs.  
See “Loading Data from a USB Flash Drive to Digital  
Piano Memory” (page E-51) and “Connecting to a  
Computer” (page E-55) for details about how to load  
data.  
Lights with each subsequent beat of each measure  
Lights with the first beat of each measure  
bo  
bp  
bq  
br  
bs  
You also can play back data directly from a USB flash  
drive without importing it into Digital Piano  
memory. For details, see “Playing Back a Song on a  
USB Flash Drive” (page E-53).  
Rewind  
Pause  
Fast forward  
2.  
Press the  
lamp is lit.  
(MUSIC LIBRARY) button so its  
bn  
5.  
Press the  
This stops song playback.  
Song playback also will stop automatically when the  
end of the song is reached. To configure the Digital  
Piano to loop song playback without stopping, turn  
on “Song Repeat” (page E-46).  
(PLAY/STOP) button again.  
bs  
Each press of the button toggles between the upper  
and lower lamps.  
Changing the Song Tempo  
Lit  
You can change the song tempo using the same  
procedure that you use to adjust the metronome  
tempo. For more information, see “Changing the  
Tempo Setting” (page E-13).  
3.  
Use the  
user song you want.  
(w, q) buttons to select the  
ct  
Example: When user song 003 is selected  
Playing on the Keyboard Using the Same  
Tone as the Song  
1.  
Hold down the  
for at least two seconds.  
(MUSIC LIBRARY) button  
bn  
User song number  
Song name  
This will assign the same tone as the right hand part of  
the current song to the keyboard.  
NOTE  
You can use the procedure under “Practicing Either  
Hand’s Part (Part Off)” (page E-26) to turn off the  
left hand part and play along on the keyboard using  
the left hand part tone.  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back Built-in Songs  
Adjusting the Song Volume  
Sounding a Count at the Beginning of a  
Song  
You can use the following procedure to adjust the  
volume level of the song’s Auto Accompaniment,  
without affecting the volume of keyboard tone output.  
For details, see “Song Volume” (page E-45).  
You can configure the Digital Piano to sound a count  
before playback of a song starts, which helps to get the  
timing right when you are playing along on the  
keyboard. For details, see “Pre-count” (page E-46).  
Practicing Either Hand’s Part (Part Off)  
Repeating Playback of a Specific Section  
(Repeat)  
You can turn off the right hand part*1 or left hand  
part*2 of a song and play that part on the Digital Piano  
while the song plays back.  
*1 Song data Channel 4 (fixed)  
*2 Song data Channel 3 (fixed)  
You can configure the Digital Piano to repeat the  
section of a song you want to practice. You could, for  
example, specify repeat play from measure 5 to  
measure 8.  
1.  
2.  
Press the  
(PART) button.  
bt  
Start  
End  
This causes “L-[ON] R-[ON]” to appear on the display.  
Use the  
(w, q) buttons to turn off the  
ct  
part you want.  
These measures are repeated.  
Press (w) to toggle the left hand part or (q) to toggle  
the right hand part on and off.  
1.  
2.  
Press the  
This starts playback of the song.  
(PLAY/STOP) button.  
bs  
3.  
4.  
Press the  
This exits the part on/off screen.  
(PART) button again.  
bt  
When playback reaches the first measure of  
the section you want to repeat, press the  
(REPEAT) button.  
Hold down the  
for at least two seconds.  
This will assign the same tone as the hand that is  
turned off to the keyboard.  
(MUSIC LIBRARY) button  
bn  
bo  
This makes the measure the “start measure”.  
The  
(REPEAT) button lamp flashes at this time.  
bo  
5.  
Press the  
song playback.  
The part you turned off does not sound, so you can play  
it on the keyboard.  
(PLAY/STOP) button to start  
bs  
3.  
4.  
When playback reaches the last measure of  
the section you want to repeat, press the  
(REPEAT) button again.  
bo  
This makes the measure the “end measure”.  
Repeat playback of the specified section starts as soon  
as you select the end measure.  
The  
(REPEAT) button lamp is lit (not flashing) at  
bo  
this time.  
Pressing  
(REPEAT) again returns to  
bo  
normal play.  
This will cause the  
(REPEAT) button lamp to go out.  
bo  
E-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back Built-in Songs  
Playing Back Audio Data  
Stored on a USB Flash Drive  
You can use your Digital Piano to play back audio data  
(WAV files*) stored on a commercially available USB  
flash drive.  
See “USB Flash Drive” on page E-48 for more  
information.  
* Linear PCM, 16bit, 44.1 kHz, Stereo  
PREPARATION  
Prepare a USB flash drive that contains data  
recorded to it using the Digital Piano’s Audio  
Recorder. See “Recording to a USB Flash Drive  
(Audio Recorder)” on page E-41 for more  
information.  
You can also use a computer to save audio data  
(WAV file) to the USB Flash Drive for playback. See  
“Storing Standard Audio Data (WAV Files) to a USB  
Flash Drive” on page E-49 for more information.  
Insert the USB flash drive that contains the data you  
want to play back into your Digital Piano’s USB  
flash drive port.  
1.  
Press the  
This will cause the button’s lamp to light.  
(AUDIO RECORDER) button.  
ds  
2.  
3.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
button.  
(AUDIO RECORDER)  
ds  
This will display the audio file selection screen.  
Use the  
(w, q) buttons to select a song.  
ct  
The  
(q) button scrolls forward through the song  
ct  
file names (WAV01, WAV02, etc.) The  
(w) button  
ct  
scrolls backward through the song file names.  
4.  
5.  
Press the  
Press the  
(EXIT) button.  
dm  
bs  
(PLAY/STOP) button.  
This will start playback of the selected song.  
6.  
To stop a song, press the  
button again.  
(PLAY/STOP)  
bs  
To exit the Audio Recorder, press the  
(AUDIO  
ds  
RECORDER) button. This will cause the lamp above  
the AUDIO RECORDER button to go out.  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music Presets  
5 6 7 8 9 bk bl bm  
cs ct  
bn  
bp bq  
bs bt  
ck  
dl dm dn do dp  
Music Presets provide you with one-touch tone,  
rhythm, chord, and other settings that are optimized  
for specific musical genres and songs.  
In addition to built-in presets, you can create your own  
original Music Presets (user presets).  
2.  
Use buttons  
to  
(Music Preset group  
dl do  
buttons) to select a group, and then use the  
(w, q) buttons to select the Music  
ct  
Preset you want.  
This will configure the Digital Piano with settings (tone,  
rhythm, etc.) of the selected Music Preset.  
The following are the settings that are included in a  
Music Preset.  
There are a total of 300 built-in Music Presets, which  
are divided into three groups (1, 2, 3). A fourth group  
(4) is provided for user presets.  
Tones (main, layer, lower split) (page E-8)  
Layer balance (page E-8)  
Octave shift (page E-10)  
Reverb (page E-11)  
Chorus (page E-12)  
Rhythm (page E-20)  
For more information, see the “Music Preset List”  
(page A-8).  
Selecting a Music Preset  
Tempo (page E-19)  
Auto Harmonize (page E-19)  
1.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
button.  
(MUSIC PRESET)  
ck  
This causes the  
and the Music Preset screen to appear.  
(ACCOMP ON/OFF) lamp to flash  
bt  
3.  
Press the  
(START/STOP) button to start  
bs  
Auto Accompaniment with the chord  
progression of the Music Preset. Play the  
melody on the keyboard.  
The preset chord progression repeats until you stop it  
by pressing the  
(START/STOP) button again.  
bs  
Pressing the  
(ACCOMP ON/OFF) button so the  
bt  
Music Preset number  
Music Preset name  
ACCOMP ON/OFF lamp is lit (not flashing) or unlit  
will turn off the chord progression of the Music  
Preset and play the normal Auto Accompaniment  
pattern.  
Each press of the  
(ACCOMP ON/OFF) button  
bt  
cycles in the sequence shown below.  
Unlit  
Lit  
Flashing  
Music Preset  
chord progression  
Normal Auto Accompaniment  
E-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music Presets  
To change the rhythm, use the through (rhythm  
5
bm  
4.  
Edit the Music Preset parameters.  
group) buttons to select the rhythm group and then  
use the (w, q) buttons to select a rhythm  
4-1.To edit the chord progression  
Press the (w) button to display “CHORD”  
ct  
ct  
number.  
and then press the  
(ENTER) button to  
dp  
To change the tone, use the  
through  
(tone  
cr  
cm  
advance to the chord progression editing  
screen.  
Next, perform the editing operation described  
under “To edit the chord progression” (page  
E-30). After you finish the editing operation,  
group) buttons to select the tone group and then use  
the (w, q) buttons to select a tone number.  
ct  
To exit a Music Preset, while holding down  
the (FUNCTION) button, press (MUSIC  
4.  
cs  
ck  
PRESET) button.  
press the  
(EXIT) button to return to the  
dm  
screen for selecting the type of editing  
operation, above.  
Creating an Original User  
Preset  
4-2.To edit Auto Accompaniment parameters  
Press the  
(q) button to display  
ct  
“Parameter” and then press the  
button to advance to the Auto  
(ENTER)  
dp  
A Music Preset editor is provided to allow you to  
create your own original Music Presets (user presets).  
Up to 50 user presets can be stored in Music Preset  
Group 4.  
Accompaniment parameter editing screen.  
Next, perform the editing operation described  
under “To edit Auto Accompaniment  
parameters” (page E-32). After you finish the  
1.  
2.  
Select the Music Preset you want to edit in  
order to create your user preset.  
editing operation, press the  
(EXIT) button  
dm  
to return to the screen for selecting the type of  
editing operation, above.  
Change the tone number, rhythm number,  
and other settings of the Music Preset as you  
want.  
The settings you configure here will be saved as a  
user Music Preset. See step 2 under “Selecting a  
Music Preset” (page E-28) for the settings you can  
configure and save for a user Music Preset.  
5.  
6.  
After editing everything you want, press the  
(EXIT) button.  
This will display a message asking if you want to  
dm  
save the user preset.  
Press the  
(YES) button.  
ct  
This displays a screen for selecting the Music Preset  
number and name for storing the edited data.  
If you do not want to save the edited data, press the  
3.  
Press the  
(FUNCTION) and  
(RHYTHM  
ck  
cs  
EDITOR) buttons at the same time.  
This displays a screen for selecting the type of editing  
operation you want to perform.  
(NO) button in place of the  
(YES) button.  
ct  
ct  
Music Preset name  
Music Preset number for data storage  
Editing operation type  
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music Presets  
7.  
Use the  
(w, q) buttons to select the  
To edit the chord progression  
ct  
Music Preset number where you want to  
store the edited data.  
1.  
On the editing operation selection screen  
(page E-29), select “CHORD” and then press  
the  
(ENTER) button to display the chord  
8.  
Enter a name for the preset.  
dp  
progression editing screen shown below.  
Use the  
(u) and  
(i) buttons to move the cursor  
do  
dn  
to the character you want to change and then use the  
ct  
(w, q) buttons to change the character. The following  
shows a table of available characters.  
To input a space, press both of the  
(w and q)  
ct  
buttons at the same time.  
(2) Cursor  
(1) Step (timing and chord)  
(3) Resolution  
(1) Step (timing and chord)  
The timing of a chord progression is expressed as a  
series of three values separated by colons (such as  
001:1:00) indicating measure*1 (001), beat (1), and  
tick (00)*2. This series of three values is referred to  
collectively as a “step”.  
The screen shot above shows the first two steps  
(001, 002) of the Music Preset. Use the  
(REW)  
bp  
and  
(FF) buttons to scroll and view other steps.  
bq  
9.  
Press the  
This saves the data.  
If the preset number where you are saving the data  
already has data saved to it, a message (Replace?) will  
appear on the display to confirm whether you want  
to replace the existing data with the new data.  
(ENTER) button.  
dp  
*1 Up to 999 measures  
*2 There are 12 ticks per beat, as shown below.  
Chord progression  
Measure 1  
Beat 2 Beat 3  
Measure 2  
Beat 2  
Press the  
(YES) button to overwrite or the  
(NO)  
ct  
ct  
Beat 1  
Beat 4  
Beat 1  
button to cancel the save operation.  
002:1:00  
Tick  
00 01 02  
09 10 11  
For the sample display  
above, the chord change  
from C to Bm occurs here.  
001:1:00  
(2) Cursor  
Specifies the step that is currently selected for  
editing.  
(3) Resolution  
Resolution is a unit used when editing step timing.  
The initial resolution is R1 (one measure), but you  
also can select R4 (1 beat = 1 quarter note) when you  
want to specify chords for each beat. Use the  
instrument part buttons ( through ) to select  
5
bm  
one of the eight resolutions shown below.  
5
6
7
8
9
bk  
bl  
bm  
R1  
R2  
R4  
R8  
R8T  
3
R16  
R16T  
3
R32T  
(1 measure)  
(2 beats)  
(1 beat)  
(1/2 beat)  
(1/3 beat)  
(1/4 beat)  
(1/6 beat)  
(1/12 beat)  
E-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music Presets  
2.  
3.  
Use the  
(REW) and  
(FF) buttons to  
bq  
4.  
Repeat the above steps to edit all of the steps  
you want.  
bp  
move the cursor (2) on the chord progression  
editing screen to the step you want to select.  
You can playback the Music Preset you are currently  
editing by pressing the  
(START/STOP) button.  
bs  
The table below describes other Music Preset editing  
operations you can perform. Press the  
Change the content of the selected step as  
desired.  
cs  
(u) and  
(FUNCTION) button, use the  
(i)  
dn  
do  
3-1.Select a chord fingering mode and use the  
chord keyboard (page E-18) to input chords.  
Fingering a chord causes the cursor (2) to  
move to the next step automatically.  
buttons to select the editing operation you want,  
perform the required operation, and then press the  
(ENTER) button to apply the edit and return to the  
chord progression editing screen.  
dp  
To exit the editing operation and discard all of your  
If you want to advance to the next step  
without changing the current chord, press  
edits, press the  
(EXIT) button.  
dm  
Editing  
the  
(PAUSE) button.  
br  
Operation  
(Display)  
Description  
Operation  
If (3) Resolution is shorter than the time up  
to the next step, a new step (without chord)  
that is equal to the time of the resolution  
will be inserted temporarily into the Music  
Preset. Fingering a chord for the new step  
will cause the step to be registered as part  
of the Music Preset, and the cursor will  
advance to the next step.* You can use this  
operation to insert a new step between the  
current and following step.  
Initializes all steps.  
Initialization is useful  
when you want to create  
a totally new chord  
progression from  
scratch.  
Initialize  
(Initialize)  
1
Changes the pitch (key) Use the (w, q)  
ct  
of the chords in all of the buttons to select the  
Change Key  
(Change Key)  
2
3
steps in semitone units.  
amount of change  
you want (–5 to 6  
semitones).  
* Using the  
(REW) and  
(FF) buttons to  
bp  
bq  
move the cursor without inputting a chord  
will delete the temporarily inserted step.  
Copies all of the steps of Use the (w, q)  
ct  
Append  
another Music Preset to buttons to select the  
Music Preset  
(Append  
Chords)  
the end of the current  
Music Preset.  
numberof the  
Music Preset you  
want to add.  
3-2.Use the  
(w, q) buttons to change the  
ct  
step timing (measure:beat:tick).  
Each press of either button changing the  
timing in accordance with the resolution.  
The range of values you can specify for the  
step timing is limited by the steps before  
and after the current step.  
The timing of the first step (001:1:00) is  
fixed and cannot be changed. Also, the final  
step is always one measure, regardless of  
the resolution.  
Delete  
Deletes a specified  
number of measures  
from the current cursor  
step forward.  
Use the (w, q)  
buttons to select the  
measures.  
ct  
Measures  
(DELETE  
Measure)  
4
5
Insert  
Inserts a blank measure  
at the currently selected  
step.  
Measure  
(INSERT  
1Measure)  
* The Music Presets in groups 2, 3, and 4 are  
numbered sequentially, following the numbers in  
group 1, which start with 1. For details about  
sequential numbers, see the “Music Preset List” on  
page A-8.  
5.  
After all editing operations are complete,  
press the (EXIT) button to return to the  
dm  
Last step  
editing operation selection screen (page  
E-29).  
3-3.To delete a step, press both of the  
(w and  
ct  
q) buttons at the same time.  
You cannot delete the first step or the last  
NOTE  
A single preset can contain up to approximately  
2,000 chords. If your edits cause the chord limit to be  
exceeded, the message “Memory Full” will appear  
on the display and further editing will become  
impossible.  
step.  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music Presets  
To edit Auto Accompaniment parameters  
1.  
On the editing operation selection screen (page E-29), select “Parameter” and then press the  
(ENTER) button to display the Auto Accompaniment parameter editing screen shown below.  
dp  
Setting  
Parameter  
2.  
Use the  
setting.  
(u) and  
(i) buttons to select a parameter, and the (w, q) buttons to change its  
ct  
dn  
do  
Parameter  
Description  
Setting  
0 Off: Off (no standby)  
SYNCHRO TYPE:  
Synchro type  
Selects the synchro standby status and type  
when the Music Preset is selected.  
1 Normal: From standby to normal pattern  
2 Variation: From standby to variation pattern  
3 Intro: From standby to intro pattern  
1
DRUM ON/OFF:  
Drum on/off  
OFF: Mutes the part.  
ON: Sounds the part.  
2
3
4
Toggles the drum part (page E-21) on or off.  
PERC ON/OFF:  
Percussion on/off  
Toggles the percussion part (page E-21) on or OFF: Mutes the part.  
off.  
ON: Sounds the part.  
BASS ON/OFF:  
Bass on/off  
OFF: Mutes the part.  
ON: Sounds the part.  
Toggles the bass part (page E-21) on or off.  
CHORD1 - 5  
5 - 9 ON/OFF:  
Toggles the Chord 1 through 5 parts (page  
E-21) on or off.  
OFF: Mutes the parts.  
ON: Sounds the parts.  
Chord 1 - 5 on/off  
INTRO CHORD:  
Intro chord  
Selects from among major (× 12 keys) and  
minor (× 12 keys) for the intro chords.  
C - B: Major (C to B)  
Cm - Bm: Minor (Cm to Bm)  
10  
11  
ENDING CHORD:  
Ending chord  
Selects from among major (× 12 keys) and  
minor (× 12 keys) for the ending chords.  
C - B: Major (C to B)  
Cm - Bm: Minor (Cm to Bm)  
Specifies whether or not a fill-in should be  
inserted into the final measure of a chord  
progression.  
AUTO FILL-IN:  
Auto fill in on/off  
OFF: Fill-in not inserted  
ON: Fill in inserted  
12  
1 Normal: Edited chord progression proceeds  
as-is.  
This parameter lets you add different  
variations to the timing of the chord  
progression being edited. You can use it to  
match the chord progression to the beat of a  
specific rhythm.  
2 Half: Halves chord timing within a measure.  
3 Double: Doubles chord timing within a  
measure.  
4 3/4: Multiplies chord timing within a measure  
by 3/4. Select this setting to match to a  
6/8 time rhythm.  
5 6/4: Multiplies chord timing within a measure  
by 3/2. Select this setting to match to a  
6/4 time rhythm.  
TIMING SET:  
13 Chord progression  
variation  
• A chord (step) that is outside of the rhythm’s  
beat is cut off.  
3.  
After all editing operations are complete, press the  
selection screen (page E-29).  
(EXIT) button to return to the editing operation  
dm  
E-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Registering Tone and Rhythm Setups  
dk dl dm dn do dp  
Registration memory lets you store Digital Piano  
setups (tone, rhythm, etc.) for instant recall whenever  
you need them. Registration memory simplifies  
performance of complex pieces that require successive  
tone and rhythm changes.  
Registration Data Types  
z Tone Settings  
Tone numbers (main, layer, split)  
Layer on/off  
Layer balance  
Split on/off  
Split point  
Octave shift  
Brightness  
Reverb  
You can have up to 96 setups in Registration memory  
at one time. The  
(BANK) button and  
dk  
dl  
(REGISTRATION 1) to  
(REGISTRATION 4)  
do  
buttons are used for recording.  
Chorus  
Transpose  
Touch response  
Soft/sostenuto pedal setting  
Damper pedal adjustment  
Pitch bend range  
dk  
dl  
dm  
dn  
do  
z Auto Accompaniment Settings (Areas 1 through 4  
only)  
Rhythm number  
Accomp on/off  
Chord fingering mode  
Synchro standby  
Area 1  
Area 2  
Area 3  
Area 4  
Bank 1  
Setup 1-1 Setup 1-2 Setup 1-3 Setup 1-4  
Setup 2-1 Setup 2-2 Setup 2-3 Setup 2-4  
Bank 2  
Tempo  
Auto Accompaniment volume  
Auto harmonize  
.
.
.
.
.
.
.
.
.
.
Bank 24 Setup 24-1 Setup 24-2 Setup 24-3 Setup 24-4  
Each press of the  
(BANK) button cycles through  
dk  
the bank numbers, from 1 to 24.  
Pressing a button from the to  
buttons selects  
dl do  
the corresponding area in the currently selected  
bank.  
Setup 8-2 data  
Tone Settings  
Keyboard Tone: 014 Harpsichord  
Brightness: 2  
Reverb: 1 Room  
Chorus: Off  
·
·
Auto Accompaniment Settings  
Rhythm: 005 Pop Rock  
Tempo: 180  
Accompaniment Volume: 20  
·
·
E-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Registering Tone and Rhythm Setups  
Saving Registration Data  
Recalling a Registration  
1.  
Configure the Digital Piano with the tone,  
rhythm, and other settings you want to save.  
1.  
Press the  
(BANK) button to select the  
dk  
bank that contains the setup you want to  
recall.  
2.  
Press the  
(BANK) button to select the  
dk  
bank where you want to save the registration.  
Example: Bank 4  
3.  
Next, hold down the  
(STORE) button as  
buttons to select  
do  
dp  
you use the  
an area.  
through  
dl  
2.  
Use the buttons  
whose setup you want to recall.  
to  
to select the area  
dl do  
The data will be saved to the bank and area you specify.  
This will recall the registration memory setup and  
automatically configure the Digital Piano settings  
accordingly.  
dl  
dm  
dn  
do  
dp  
Example: When recalling the registration data in Bank  
4, Area 1  
Example: Bank 4, Area 1  
Saving registration Data on an External  
Device  
Area  
See “Connecting to a Computer” (page E-55) for details  
about how to transfer sampled data to a computer for  
storage.  
E-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Your Keyboard Play  
4
cs ct  
bo bp bq br bs  
dm dn do dp  
ds  
You can use the Song Recorder to record what you play  
2.  
Configure the tone, rhythm, and other  
settings you want to use.  
The settings you configure here will be included as  
part of the recorded song data.  
For details about what is included in the recorded  
song data, see “System Track” (page E-37).  
on the Digital Piano to built-in song memory. You can  
divide a song into parts (by instrument, by left hand  
and right hand, etc.) and record each part separately.  
You can even use “punch-in recordingto edit specific  
parts of existing recordings.  
When a commercially available USB flash drive is  
inserted in the Digital Piano’s USB flash drive port,  
audio data is recorded to and played back from the  
USB flash drive (Audio Recorder).  
3.  
4.  
Play something on the keyboard.  
Recording starts as soon as you play something.  
If Auto Accompaniment is playing, it will be  
included in the recorded data.  
When you are finished, press the  
STOP) button.  
(START/  
bs  
Recording to Built-in Song  
Memory (Song Recorder)  
This will cause the  
(SONG RECORDER) lamp to  
4
flash and then light, indicating the playback mode.  
If you are using Auto Accompaniment, you also can  
end the recording session by pressing the  
The following are the steps for recording or playing  
back a single recorder memory song.  
br  
(ENDING) button.  
1.  
Press the  
twice so its lamp is flashing.  
(SONG RECORDER) button  
4
Lit: Playback mode  
This turns on the Song Recorder and enters the record  
mode.  
Each press of the  
(SONG RECORDER) button  
4
cycles through modes as shown below.  
5.  
To play back what you have recorded, press  
(START/STOP) again.  
Song Recorder Off  
Unlit  
Song Recorder On  
Lit: Playback mode  
Flashing: Record mode  
bs  
Each press of  
starts and stops playback.  
bs  
E-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Your Keyboard Play  
6.  
To exit the Song Recorder, press the  
(SONG RECORDER) button again so its  
lamp goes out.  
4
Recording or Playing Back  
Multiple Songs  
You can record up to five songs (numbered 1 through  
5) in memory. After that, you can select a specific song  
for playback.  
Unlit: Song Recorder off  
1.  
Use the  
(SONG RECORDER) button to  
4
NOTE  
cycle through the Song Recorder modes until  
the lamp above the SONG RECORDER  
button is lit. This is the Song Recorder  
playback mode.  
Recorder memory capacity is approximately 10,000  
notes per song. When remaining capacity is 100  
notes or less, the  
lamp will flash at high speed. Recording will stop  
automatically when memory becomes full.  
Repeat, fast reverse, fast forward, pause, and tempo  
adjustment during playback are the same as when  
playing back user songs. See “Listening to Songs  
Loaded from an External Source” (page E-25) for  
more information.  
(SONG RECORDER) button  
4
Lit: Playback mode  
2.  
While holding down the  
button, press the  
button.  
(FUNCTION)  
cs  
You can listen to the song data currently stored in  
recorder memory at any time by pressing the  
(SONG RECORDER)  
4
(SONG RECORDER) button to enter the  
playback mode and then pressing  
4
(START/  
bs  
This displays the song selection screen.  
STOP).  
IMPORTANT!  
• A new recording replaces (deletes) previously  
recorded contents.  
• If power to the Digital Piano is cut off while recording  
is in progress, everything you recorded up to that  
point will be deleted. Take care so power is not  
turned off accidentally during recording operations.  
3.  
4.  
5.  
Use the  
song number you want.  
(w, q) buttons to select the  
ct  
Press the (EXIT) button to exit the song  
selection screen.  
dm  
To record to the currently selected song,  
press the  
(SONG RECORDER) button. To  
4
play back the currently selected song, press  
the (START/STOP) button.  
bs  
6.  
If you are recording, continue from step 2  
under “Recording to Built-in Song Memory  
(Song Recorder)” (page E-35).  
E-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Your Keyboard Play  
Supported Track Data  
The following describes the data that can be recorded  
to each type of track.  
Recording to a Specific Track  
(Part)  
System Track, Tracks 01 through 16  
Keyboard notes, keyboard tone setting (main), pedal  
and pitch bend wheel operation  
You can record specific instruments, the left hand and  
right hand, or other parts of a song individually, and  
then combine them into a final song.  
System Track only  
What is a track?  
Layer, split, octave shift, reverb, chorus, tempo, Auto  
Accompaniment play, auto harmonize, one-touch  
preset, Music Preset*1, registration*1*2  
A “track” is a separate recorded part of a song. The  
Song Recorder of this Digital Piano has a total of 17  
tracks, one of which is a system track as described  
below.  
*1 Recall only  
*2 The Auto Accompaniment volume level and  
transpose setting of the recalled data is not included  
in the recording.  
z System Track  
In addition to notes you play on the keyboard and  
other performance operation data, the system track  
also includes a wide range of setup information for  
the song, including layer on/off, split on/off, tempo,  
Auto Accompaniment settings, reverb on/off, etc.  
When you record a single-track song to recorder  
memory, as shown under “Recording to Built-in  
Song Memory (Song Recorder)” (page E-35) and  
“Recording or Playing Back Multiple Songs” (page  
E-36), everything is recorded to the system track.  
1.  
Record the first part to the system track.  
Use the procedure under “Recording to Built-in Song  
Memory (Song Recorder)” (page E-35) or “Recording  
or Playing Back Multiple Songs” (page E-36) to  
record to the system track.  
2.  
Use the  
(SONG RECORDER) button to  
4
cycle through the Song Recorder modes until  
the lamp above the SONG RECORDER  
button is flashing. This is the Song Recorder  
record mode.  
z Tracks 01 through 16  
These tracks can be used to record notes, as well as  
pitch bend wheel and pedal operations, and the  
keyboard tone setting. These tracks can be combined  
with the system track and each other to create the  
final song.  
Flashing: Record mode  
3.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
button.  
(SONG RECORDER)  
4
This displays the track selection screen.  
Use the (w, q) button to select the track you want  
ct  
to record next (T01 through T16).  
After selecting a track, press the  
exit the track selection screen.  
(EXIT) button to  
dm  
Track Name  
Display  
System Track  
Sys  
Tracks 01 through 16  
T01 through T16  
E-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Your Keyboard Play  
4.  
Select the tone of the part you want to record  
to the track.  
Deleting Data Recorded with  
the Song Recorder  
Performance data recorded with the Song Recorder can  
be deleted song-by-song. You also can delete a  
particular track from a song.  
5.  
Press the  
(START/STOP) button.  
bs  
This will start playback of what you recorded to the  
system track and start recording to the currently  
selected track. Play what you want to record to the  
current track along with the playback from the system  
track.  
Deleting a Recorder Song  
6.  
To stop recording, press the  
STOP) button again.  
This enters the playback mode. Press the  
STOP) button again to play back the track you just  
(START/  
bs  
1.  
Use the  
(SONG RECORDER) button to  
4
cycle through the Song Recorder modes until  
the lamp above the SONG RECORDER  
button is lit. This is the Song Recorder  
playback mode.  
(START/  
bs  
recorded. Each press of  
stops playback.  
(START/STOP) starts and  
bs  
You can use the following procedure to turn specific  
tracks on (play enabled) and off (play disabled). This  
allows you to listen only to the track(s) you want  
when recording a new track.  
Lit: Playback mode  
(1) While holding down the  
(FUNCTION)  
cs  
button, press the  
button.  
(SONG RECORDER)  
4
This displays the song selection screen.  
2.  
While holding down the  
(FUNCTION)  
cs  
(2) Press the (i) button once.  
do  
button, press the  
button.  
(SONG RECORDER)  
4
This displays the track on/off screen.  
(3) Use the  
(w, q) buttons to select the track  
ct  
you want, and then press the  
to toggle it on or off.  
(ENTER) button  
dp  
This displays the recorder song selection screen.  
3.  
4.  
Use the  
(w, q) buttons to select the  
ct  
recorder song you want to delete.  
7.  
Repeat steps 2 through 6 as required to  
record all of the tracks you want.  
Hold down the (SONG RECORDER)  
button until the message “Sure?” appears on  
4
the display.  
5.  
Press the  
recorder song.  
(YES) button to delete the  
ct  
To cancel the delete operation, press the  
(NO)  
ct  
button.  
E-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Your Keyboard Play  
3.  
4.  
Press the  
This will start playback of the selected track.  
(START/STOP) button.  
bs  
Deleting a Particular Track  
1.  
Perform steps 1 through 3 of the procedure  
under “Deleting a Recorder Song” to select  
the recorder song that contains the track you  
want to delete.  
When playback reaches the point you want to  
re-record, play the notes and perform the  
other operations you want.  
This automatically starts punch-in recording, which  
will continue until step 5, below.  
Any one of the following also will start punch-in  
recording: a pedal or pitch bend wheel operation;  
pressing the  
2.  
3.  
Press the  
This displays the track selection screen.  
(i) button.  
do  
(SONG RECORDER) button;*1  
4
Use the  
(w, q) buttons to select the  
ct  
changing the tone setting; changing the rhythm, or  
tempo setting*2  
track you want to delete.  
*1 Press  
(SONG RECORDER) when you want to  
4
start punch-in recording without note input or a  
setting change.  
System track only  
4.  
5.  
Hold down the (SONG RECORDER)  
button until the message “Sure?” appears on  
the display.  
4
*2  
You can perform  
(REW),  
(FF), and  
(PAUSE)  
br  
bp  
bq  
button operations during punch-in playback to jump  
more quickly to the section you want to re-record.  
Press the  
(YES) button to delete the track.  
ct  
To cancel the delete operation, press the  
(NO)  
ct  
5.  
To stop punch-in recording, press the  
bs  
button.  
(START/STOP) button again.  
Anything in the track following the point where you  
Re-recording Part of a  
Recorder Song  
(Punch-in Recording)  
pressed the  
as-is.  
(START/STOP) button will be retained  
bs  
If you want to delete all of the data in the track  
following the section you re-recorded with punch-in  
recording, press the  
(SONG RECORDER) button  
4
in place of the  
If you want to cancel punch-in recording and retain  
the original (unedited) track data, hold down the  
(SONG RECORDER) button until the display exits  
the punch-in recording screen.  
(START/STOP) button above.  
You can use punch-in recording to re-record a specific  
part of recorder song that you want to improve or  
correct.  
bs  
4
Mistake  
Playback  
Use punch-in  
recording to re-record  
only this part.  
1.  
2.  
Enter the Song Recorder record mode and  
select the track that contains the section you  
want to re-record.  
See step 3 under “Recording to a Specific Track  
(Part)” (page E-37).  
Hold down the  
(SONG RECORDER)  
4
button until the punch-in recording screen  
appears on the display.  
E-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Your Keyboard Play  
Performing Punch-in Recording for Areas  
Specifying the Punch-in Recording  
Location (Auto Punch-in Recording)  
Smaller than One Measure  
Use the procedure below to specify a punch-in  
recording area that includes a part of a measure.  
You can use the following procedure to specify a  
particular range for punch-in recording.  
Example: To re-record from beat 3 of measure 2 up to beat  
Start measure  
End measure  
1 of measure 4  
Punch-in recording range  
To re-record this section  
1.  
Enter the Song Recorder record mode.  
While holding down the  
(FUNCTION) button,  
cs  
1.  
2.  
Start playback of the song that contains the  
section you want to re-record.  
press the  
(SONG RECORDER) button. This will  
4
display the recording setup screen.  
2.  
3.  
Use the  
(u) and  
(i) buttons to display  
do  
dn  
When playback reaches the beginning of the  
“AutoPu.IN”, and then use the  
(w, q)  
ct  
section you want to re-record, press the  
bo  
buttons to select the start measure.  
(REPEAT) button.  
Use the (u) and (i) buttons to  
dn  
do  
3.  
When playback reaches the end of the  
section you want to re-record, press the  
(REPEAT) button again.  
display “AutoPu.OUT”, and then use the  
(w, q) buttons to select the end measure.  
ct  
bo  
After selecting the start and end measures, press the  
(EXIT) button to exit the recording setup screen.  
4.  
5.  
Press the  
playback.  
(START/STOP) button to stop  
bs  
dm  
4.  
Select the track that contains the range of  
measures you want to re-record.  
See step 3 under “Re-recording Part of a Recorder  
Song (Punch-in Recording)” (page E-39).  
Enter the Song Recorder record mode and  
select the track that contains the section you  
want to re-record.  
5.  
6.  
Press the  
punch-in recording.  
(q) button to turn on auto  
ct  
For information about selecting a track, see step 3  
under “Recording to a Specific Track (Part)” (page  
E-37).  
Press the  
playback.  
(START/STOP) button to start  
bs  
6.  
Hold down the  
(SONG RECORDER)  
4
button until the punch-in recording screen  
appears on the display.  
Punch in recording will start from the start measure  
and stop with the end measure automatically.  
Play the notes and perform the other operations you  
want.  
7.  
8.  
9.  
Press the  
(q) button to turn on auto  
ct  
punch-in recording.  
Press the  
repeat.  
(REPEAT) button to turn on  
bo  
Press the  
(START/STOP) button.  
bs  
This starts punch-in playback from the measure before  
the location (start point) you specified in step 2, above.  
Punch-in recording starts automatically when  
playback reaches the start point and ends  
automatically when it reaches the location you  
specified in step 3 (end point).  
E-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Your Keyboard Play  
2.  
Press the  
(AUDIO RECORDER) button as  
ds  
Recording to a USB Flash  
Drive (Audio Recorder)  
Anything played on the Digital Piano is recorded to the  
USB flash drive as audio data (WAV files*). If you play  
along on the Digital Piano as you play back data stored  
in song memory, the memory playback and your  
keyboard play are both recorded to USB flash drive.  
* Linear PCM, 16bit, 44.1 kHz, Stereo  
many times as necessary until its lamp starts  
to flash (which indicates audio recording  
standby).  
The first press of the  
(AUDIO RECORDER)  
ds  
button may cause the message “Media Mounting” to  
appear on the Digital Piano display. If this happens,  
wait until the display returns to normal. After that,  
press the  
until its lamp starts to flash.  
(AUDIO RECORDER) button again  
ds  
Recording Capacity  
99 files (No. 01 to No. 99)  
Approximately 25 minutes maximum recording per  
file  
3.  
Start playing something on the keyboard.  
Recorded Data  
This will start recording to the USB flash drive. The  
message “A.Rec Start” will appear on the display a  
few seconds after recording starts.  
Anything played on the Digital Piano is recorded.  
Individual part recording is not supported.  
NOTE  
Recording Data Storage  
You can also start recording by pressing any one of  
the three pedals in step 3.  
Do not remove the USB flash drive from the USB  
flash drive port while the AUDIO RECORDER  
button lamp is lit or flashing. Doing so will interrupt  
recording and may corrupt data.  
Each new recording of audio data to a USB flash drive  
is automatically assigned a new file name, so existing  
data is not overwritten.  
Recording Digital Piano Play  
(Audio Recorder)  
4.  
To stop recording, press the  
RECORDER) button.  
(AUDIO  
ds  
PREPARATION  
The AUDIO RECORDER button lamp will flash for  
a short while after you press it, and then it will stop  
flashing and remain lit to let you know that audio  
recording is complete. Do not perform the operations  
below while the button is flashing.  
Be sure to format the USB flash drive on the Digital  
Piano before using it. See “USB Flash Drive” on page  
E-48 for more information.  
1.  
Insert the USB flash drive into the Digital  
Piano’s USB flash drive port.  
When you perform a USB flash drive operation or turn  
on the Digital Piano while a USB flash drive is plugged  
in, the Digital Piano initially needs to perform a  
At this time, you can press the  
(PLAY/STOP)  
bs  
button to replay what you have just recorded. To stop  
playback, press the (PLAY/STOP) button.  
bs  
To continue with audio recording, press the  
(AUDIO RECORDER) button so its lamp flashes. To  
exit audio recording, press the (AUDIO  
ds  
ds  
“mounting” sequence to prepare for data exchange  
with the USB flash drive. Digital Piano operations are  
momentarily disabled while a mounting sequence is  
being performed. While the mounting process is in  
progress, the message “Media Mounting” will be  
displayed or “*****” will flash on the display. It may  
take up to 10 or 20 seconds or even longer for a USB  
flash drive to be mounted. Do not attempt to perform  
any operation on the Digital Piano while a mounting  
sequence is in progress. A USB flash drive needs to be  
mounted each time it is connected to the Digital Piano.  
RECORDER) button twice so its lamp goes out.  
E-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Your Keyboard Play  
Recording Digital Piano Play as Data  
Recorded in Song Memory Plays Back  
(Audio Recorder)  
Playing Along with Data Recorded on a  
USB Flash Drive  
1.  
Press the  
(AUDIO RECORDER) button.  
ds  
The above step is not necessary if you want to play  
back recorded data immediately after recording it  
(because the AUDIO RECORDER button lamp is  
already lit).  
1.  
Press the  
(SONG RECORDER) button.  
4
This causes the SONG RECORDER button lamp to  
light.  
This causes the AUDIO RECORDER button lamp to  
light.  
2.  
Press the  
(AUDIO RECORDER) button as  
ds  
many times as necessary until its lamp starts  
to flash (which indicates audio recording  
standby).  
2.  
3.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
button.  
(AUDIO RECORDER)  
ds  
The first press of the  
(AUDIO RECORDER)  
ds  
button may cause the message “Media Mounting” to  
appear on the Digital Piano display. If this happens,  
wait until the display returns to normal. After that,  
This will display the audio file selection screen.  
Use the  
(w, q) buttons to select a song.  
ct  
press the  
(AUDIO RECORDER) button again  
ds  
The  
(w) button scrolls through the recorded  
until its lamp starts to flash.  
ct  
songs in order from the newest (most recently  
recorded) to the oldest.  
The  
(q) button scrolls from the old to the new.  
ct  
4.  
5.  
6.  
Press the  
Press the  
(EXIT) button.  
dm  
bs  
(PLAY/STOP) button.  
3.  
4.  
Press the  
(PLAY/STOP) button.  
bs  
To stop a song, press the  
button again.  
To exit the Audio Recorder, press the  
RECORDER) button. This will cause the lamp above  
the AUDIO RECORDER button to go out.  
(PLAY/STOP)  
bs  
This will start playback of the current song memory  
contents. Play along on the Digital Piano.  
(AUDIO  
ds  
To stop recording, press the  
RECORDER) button.  
(AUDIO  
ds  
The AUDIO RECORDER button lamp will flash for  
a short while after you press it, and then it will stop  
flashing and remain lit to let you know that audio  
recording is complete. Do not perform the operations  
below while the button is flashing.  
To continue with audio recording, press the  
ds  
(AUDIO RECORDER) button so its lamp flashes. To  
exit audio recording, press the (AUDIO  
ds  
RECORDER) button twice so its lamp goes out.  
E-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Your Keyboard Play  
Deleting an Audio File from a USB Flash  
Drive  
Files can be deleted one at a time.  
IMPORTANT!  
• The procedure below deletes all of the data of the  
selected track. Note that the delete operation cannot  
be undone. Check to make sure you really do not  
need the data in Digital Piano memory before you  
perform the following steps.  
1.  
2.  
Press the  
(AUDIO RECORDER) button.  
ds  
This will cause the AUDIO RECORDER button lamp  
to light.  
While holding down the  
button, press the  
button.  
(FUNCTION)  
cs  
(AUDIO RECORDER)  
ds  
This will display the audio file selection screen.  
3.  
Use the  
song you want to delete.  
(w, q) buttons to select the  
ct  
The  
(w) button scrolls through the recorded  
ct  
songs in order from the newest (most recently  
recorded) to the oldest.  
The  
(q) button scrolls from the old to the new.  
ct  
4.  
5.  
Hold down the  
button until the message “Sure?” appears on  
the display.  
(AUDIO RECORDER)  
ds  
To delete the data, press the  
button.  
(YES)  
ct  
This will delete the Audio Recorder data you selected.  
To cancel the delete operation, press the  
(NO)  
ct  
button.  
NOTE  
The file number of file you delete remains unused.  
Recording a new file will cause the file number that  
comes after the last file recorded to the USB flash  
drive.  
E-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Settings  
cs ct  
dn do  
You can use the settings in this section to adjust the  
tuning and touch of the keyboard, to configure pedal  
and MIDI settings, and to configure other parameters  
in order to tailor Digital Piano operation to your  
particular needs.  
NOTE  
Holding down the  
you press the  
scroll the setting in steps of 10.  
You also can use the (FUNCTION) button for  
(FUNCTION) button while  
(w, q) buttons in step 3 will  
cs  
ct  
cs  
faster scrolling while changing the tone number,  
rhythm number, and other scrollable settings.  
Configuring Settings  
Keep the  
while pressing a  
speed scrolling. Releasing the  
(FUNCTION) button depressed  
cs  
(w, q) button for high-  
ct  
1.  
Press the  
(FUNCTION) button.  
cs  
(FUNCTION)  
cs  
The FUNCTION lamp will light and the function screen  
will appear on the display. (See table below.)  
button first can result in another unintended  
setting being changed.  
Parameter or group  
Setting  
2.  
Use the  
(u) and  
(i) buttons to select  
do  
dn  
one of the parameters (1 through 8) shown in  
the table below.  
Parameters 4 through 8 actually are parameter  
groups. After selecting a group, press the  
dp  
(ENTER) button, and then use buttons (u) and  
dn  
do  
(i) to select the parameter you want.  
Short cut buttons also are available for accessing a  
parameter directly after you press the  
cs  
(FUNCTION) button, without going through the  
menu. See the “Shortcut Button” column in the table  
below for the applicable shortcut button of each  
parameter.  
3.  
Use the  
(w, q) buttons to change the  
ct  
setting of the currently selected parameter.  
To return to the function screen, press the  
(EXIT)  
dm  
or  
(FUNCTION) button.  
cs  
E-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Settings  
Shortcut  
Button*  
No.  
Parameter  
Display Name  
Description  
Settings  
1
Keyboard Key (Transpose) Transpose  
Adjusts keyboard tuning by semitone –12 to 00 to 12  
cm  
units.  
semitones  
2
3
Keyboard Fine Tuning  
(Tuning)  
Tune  
Raises or lowers the overall pitch of  
415.5 Hz to 440.0 Hz to  
the Digital Piano in 0.1 Hz steps from 465.9 Hz  
the standard pitch of A4 = 440.0 Hz.  
cn  
co  
Keyboard Touch (Touch  
Response)  
Touch  
Adjusts keyboard touch.  
Off: Off  
1: Strong sound even  
with light pressure  
2: Normal  
3: Normal sound even  
with strong pressure  
4
Volume Level Group  
Volume  
cp  
4-1 Layered Tone Volume LayerBal.  
(Layer Balance)  
Adjusts the volume level of the layered –24 to 00 to 24  
tone without changing the keyboard  
main tone.  
4-2 Auto Accompaniment AccompVol.  
Volume  
Adjusts the volume level of Auto  
Accompaniment without changing the  
keyboard tone volume level.  
00 to 42  
cs bn  
*
4-3 Song Volume  
SongVol.  
Adjusts the volume level of user song 00 to 42  
playback without changing the  
*
*
cs bn  
keyboard tone volume level.  
4-4 Metronome Volume  
MetroVol.  
See page E-13.  
00 to 42  
cs 3  
5
Temperament/Effect Group Tmpr/Effect  
cq  
5-1 Temperament  
Temper.  
Changes the temperament of the  
<Temperaments>  
keyboard and Auto Accompaniment  
00: Equal / 01: Pure Major /  
from the standard equal temperament 02: Pure Minor /  
to another tuning more suitable for  
playing classics, etc.  
03: Pythagorean /  
04: Kirnberger 3 /  
05: Werckmeister /  
06: Mean-Tone / 07: Rast /  
Pressing a keyboard key while the  
temperament screen is displayed will  
make the pressed key the base note of 08: Bayati / 09: Hijaz /  
the temperament.  
10: Saba / 11: Dashti /  
12: Chahargah /  
13: Segah /  
14: Gurjari Todi /  
15: Chandrakauns /  
16: Charukeshi  
<Base notes>  
C to B (12 types)  
5-2 Accompaniment  
Temperament  
AccompTmpr Turn this setting off to play Auto  
Accompaniment patterns using  
Off, On  
standard equal temperament (00:  
Equal), regardless of the temperament  
setting currently selected with the  
Temperament parameter (5-1).  
5-3 Stretch Tuning  
Stretch  
Sharpens high notes and flattens low  
notes to achieve stretch tuning. Turn  
off this setting to play with normal  
(non-stretch) tuning.  
Off, On  
5-4 Brilliance  
Brilliance  
OctShift  
See page E-11.  
See page E-10.  
–3 to 0 to 3  
5-5 Octave Shift  
U1 : –2 to 0 to 2  
U2 : –2 to 0 to 2  
L1 : –2 to 0 to 2  
cs cm  
*
*
5-6 Duet Mode  
Duet  
See page E-14.  
Off, On  
cs dq  
*
– in this column means, “While holding down , press .”  
cs bn cs bn  
E-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Settings  
Shortcut  
Button*  
No.  
Parameter  
Display Name  
Description  
Settings  
6
Song Playback/  
USB Flash Drive Group  
Play/Media  
ds  
6-1 Pre-count  
PreCount  
Turn on this setting for an audible  
count before starting playback of a  
user song or a song on a USB flash  
drive.  
Off, On  
Off, On  
6-2 Song Repeat  
SongRepeat  
Turn on this setting to repeat play a  
user song or a song on a USB flash  
drive.  
cs bo  
*
6-3 USB Flash Drive  
Format  
MediaFormat See page E-50.  
6-4 USB Flash Drive File  
Delete  
FileDelete  
See page E-52.  
See page E-52.  
6-5 USB Flash Drive File  
Rename  
FileRename  
7
MIDI Group  
MIDI  
cr  
7-1 Keyboard Channel  
KeyboardCh  
Selects the keyboard channel, which is 01 to 16  
the channel used to send MIDI data  
corresponding to Digital Piano  
keyboard play to an external device.  
7-2 Accomp MIDI Out  
AccompOut  
Turn on this setting to send MIDI data Off, On  
corresponding to Auto  
Accompaniment to an external device.  
7-3 MIDI In Chord Judge ChordJudge  
Select whether chord input should be Off, On  
performed when an Auto  
Accompaniment chord keyboard MIDI  
note on message is received.  
7-4 Local Control  
LocalCtrl  
Turn off this setting to have keyboard Off, On  
notes sent to an external device  
without being sounded by the Digital  
Piano.  
*
– in this column means, “While holding down , press .”  
cs bn cs bn  
E-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Settings  
Shortcut  
Button*  
No.  
Parameter  
Display Name  
Description  
Settings  
8
Other Parameters Group  
8-1 Display Contrast  
General  
Contrast  
dk  
Adjusts the contrast of the Digital  
Piano’s display.  
00 to 26  
Off, On  
8-2 Panel Lock  
PanelLock  
BackUp  
Turn on to lock the Digital Piano’s  
control panel to prevent unauthorized  
or accidental operation.  
• This setting is disabled in the Duet  
Mode, while the recorder is on, or  
while Auto Accompaniment, a song,  
or the metronome is playing.  
8-3 Setting Backup  
Switching this setting from off to on  
will save various Digital Piano settings  
in effect at that time, and restore them  
the next time the Digital Piano is  
turned on.  
Off, On  
• This operation is disabled in the Duet  
Mode, while the recorder is on, or  
while Auto Accompaniment, a song,  
or the metronome is playing.  
8-4 Auto Power Off  
AutoPower  
Specifies if Auto Power Off (page E-5) Off, On  
is enabled (on*) or disabled (oFF).  
Even when “on” is selected for this  
setting, you can temporarily disable  
Auto Power Off by holding down the  
(FUNCTION) button as you press  
cs  
the  
(P) button to turn on the  
1
Digital Piano.  
8-5 Half Pedal Effect  
8-6 Pitch Bend Range  
HalfPedal  
Adjusts the amount of the pedal effect 00 to 42  
applied when the damper pedal is  
pressed part way.  
BendRange  
Specifies the amount of pitch bend  
applied when the pitch bend wheel is  
rotated all the way up or down.  
00 to 12 semitones  
*
– in this column means, “While holding down , press .”  
cs bn cs bn  
E-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Flash Drive  
cs ct  
bs bt  
dn do dp  
ds  
Your Digital Piano supports the following USB flash  
drive operations.  
z USB flash drive formatting  
Types of Data  
Supported  
Operations  
z Data storage to a USB flash drive  
Song data recorded with the Digital Piano’s song  
recorder is on a USB flash drive as MIDI files  
(SMF format 0).  
Description  
(File Name Extension)  
Save to  
Load  
fromUSB  
Flash  
Data Type  
USB  
Flash  
Drive  
Drive  
Standard audio data from a computer (WAV files)  
can also be stored on a USB flash drive and  
played back on the Digital Piano.  
Digital Piano play can be recorded directly to a  
USB flash drive.  
For details, see “Recording to a USB Flash Drive  
(Audio Recorder)” (page E-41).  
Storage of edited Auto Accompaniment data on a  
USB flash drive  
User  
rhythms  
Auto Accompaniment  
data edited with this  
(page E-20) Digital Piano (AC7)  
O
O
O
O
User songs One of the following two  
(page E-25) types of music data  
1. CASIO format data  
(CM2)  
2. Standard MIDI files  
(MID)  
SMF Format 0 or  
z USB flash drive data loading to Digital Piano  
memory  
Format 1  
MIDI files and CASIO format files stored on a  
USB flash drive can be loaded into the Digital  
Piano as user songs (page E-25).  
User Music Music Preset data edited  
on this Digital Piano  
(page E-29) (MPS)  
Presets  
O
z Delete data from a USB flash drive  
z Easy play back of song data from a USB flash drive  
Recorder  
songs  
(page E-35)  
Song data recorded on  
this Digital Piano (CSR)  
O*  
O
O
Registration Tone and rhythm setup  
(page E-33) settings (CR6)  
O
* Can be saved as a standard MIDI file (SMF format 0).  
E-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Flash Drive  
Storing Standard Audio Data  
(WAV Files) to a USB Flash  
Drive  
Performing a record operation with the Digital Piano’s  
audio recorder creates a folder named AUDIO on the  
USB flash drive. WAV files are stored in the AUDIO  
folder, automatically assigning them names from  
TAKE01.WAV to TAKE99.WAV. You also can connect  
a USB flash drive to a computer and change the names  
of audio data (WAV) files to the format  
Copyrights  
You are allowed to use recordings for your own  
personal use. Any reproduction of an audio or music  
format file, without the permission of its copyright  
holder, is strictly prohibited under copyright laws  
and international treaties. Also, making such files  
available on the Internet or distributing them to third  
parties, regardless of whether such activities are  
conducted with or without compensation, is strictly  
prohibited under copyright laws and international  
treaties. CASIO COMPUTER CO., LTD. shall not be  
held in any way liable for any use of this Digital  
Piano that is illegal under copyright laws.  
“TAKEXX*.WAV”, and move them to the AUDIO  
folder. Then you will be able to play them back on the  
Digital Piano.  
* XX = 01 to 99  
Connecting a USB Flash Drive  
to and Detaching It from the  
Digital Piano  
USB Flash Drive and USB Flash Drive  
Port Handling Precautions  
IMPORTANT!  
IMPORTANT!  
• Never plug any other device besides a USB flash  
drive into the USB flash drive port.  
• Be sure to observe the precautions provided in the  
documentation that comes with the USB flash drive.  
• Avoid using a USB flash drive under the following  
conditions. Such conditions can corrupt data stored  
on the USB flash drive.  
• Areas subjected to high temperature, high  
humidity, or corrosive gas  
• Areas subjected to strong electrostatic charge and  
digital noise  
• Never remove the USB flash drive while data is  
being written to or loaded from it. Doing so can  
corrupt the data on the USB flash drive and damage  
the USB flash drive port.  
• Never insert anything besides a USB flash drive into  
the USB flash drive port. Doing so creates the risk of  
malfunction.  
• When you perform a USB flash drive operation or  
turn on the Digital Piano while a USB flash drive is  
plugged in, the Digital Piano initially needs to  
perform a “mounting” sequence to prepare for data  
exchange with the USB flash drive. Digital Piano  
operations are momentarily disabled while a  
mounting sequence is being performed. While the  
mounting process is in progress, the message  
“Media Mounting” will be displayed or “*****” will  
flash on the display. It may take up to 10 or 20  
seconds or even longer for a USB flash drive to be  
mounted. Do not attempt to perform any operation  
on the Digital Piano while a mounting sequence is in  
progress. A USB flash drive needs to be mounted  
each time it is connected to the Digital Piano.  
• A USB flash drive can become warm after very long  
use. This is normal and does not indicate  
malfunction.  
To insert a USB flash drive  
• Static electricity conducted to the USB flash drive  
port from your hand or from a USB flash drive can  
cause malfunction of the Digital Piano. If this  
happens, turn the Digital Piano off and then back on  
again.  
1.  
As shown in the illustration below, insert the  
USB flash drive into the Digital Piano’s USB  
flash drive port.  
Carefully push the USB flash drive in as far as it will  
go. Do not use undue force when inserting the USB  
flash drive.  
USB flash drive port  
USB flash drive  
E-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Flash Drive  
To remove a USB flash drive  
Saving Digital Piano Data to a  
USB Flash Drive  
Use the following procedure to save Digital Piano data  
to a USB flash drive.  
1.  
Check to confirm that there is no data  
exchange operation being performed, and  
then pull the USB flash drive straight out.  
Song Recorder songs can be converted to standard  
MIDI files (SMF format 0) and saved.  
User songs (downloaded songs, etc.) cannot be  
saved to a USB flash drive.  
Formatting a USB Flash Drive  
IMPORTANT!  
1.  
2.  
Insert the USB flash drive into the Digital  
Piano’s USB flash drive port.  
• Be sure to format a USB flash drive on the Digital  
Piano before using it for the first time.  
• Before formatting a USB flash drive, make sure it  
does not have any valuable data stored on it.  
• The format operation performed by this Digital Piano  
is a “quick format”. If you want to completely delete  
all of the data in USB flash drive, format it on your  
computer or some other device.  
Select the data you want to save to the USB  
flash drive.  
To select this  
type of data:*1  
Do this:  
User rhythms Select from among user rhythms 001  
through 010 (page E-20).  
<Supported USB Flash Drives>  
This Digital Piano supports USB flash drives formatted  
to FAT32. If your USB flash drive is formatted to a  
different file system, use the Windows format function  
to reformat it to FAT32. Do not use quick format.  
User Music  
Preset  
Select from among user Music Preset  
001 through 050 (page E-29).  
Recorder songs Select from among recorder songs 1  
through 5 (page E-35).  
Registrations*2 Press the  
(RHYTHM) button so the  
bn  
RHYTHM lamp next to it is lit.  
1.  
Insert the USB flash drive you want to format  
into the Digital Piano’s USB flash drive port.  
*1For more information about data types, see page  
E-48.  
2.  
3.  
4.  
Press the  
Press the  
Press the  
(FUNCTION) button.  
cs  
ds  
do  
*2All registration data (24 banks × 4 areas) is saved  
in a single file.  
(AUDIO RECORDER) button.  
(i) button to switch to the  
3.  
4.  
Hold down the  
button until the “LOAD” screen appears for  
the data you selected.  
You can cancel the LOAD/SAVE operation any time  
by pressing the  
(AUDIO RECORDER)  
ds  
“MediaFormat” screen.  
5.  
Press the (ENTER) button.  
This will display a confirmation message “SURE?”.  
If you want to cancel the format operation, press the  
dp  
(EXIT) button.  
dm  
Press the  
(i) button to switch to the  
do  
(NO) or  
(EXIT) button.  
ct  
dm  
“SAVE” screen for the data you selected.  
6.  
Press the  
(YES) button.  
If you are saving a recorder song to a standard MIDI  
ct  
file (SMF), press the  
(i) button again so “SMF” is  
do  
The message “Please Wait” will remain on the  
display while the format operation is being  
performed. Do not perform any Digital Piano  
operation while this message is on the display.  
“Complete” appears on the display after formatting  
is complete.  
displayed on the right side of the screen.  
E-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Flash Drive  
5.  
Use the  
(w, q) buttons to select the file  
ct  
Loading Data from a USB  
Flash Drive to Digital Piano  
Memory  
You can use the procedure below to load data from a  
USB flash drive into Digital Piano memory.  
number (01 to 99) you want to assign to the  
data when it is saved to the USB flash drive.  
The file number is the final two characters of the file  
name* that appears on the display. By changing this  
within the range of 01 to 99 for each save, up to 99  
files of the same data type can be stored on the USB  
flash drive.  
* The first six characters of the file name indicate the  
data type as shown below. These characters are  
fixed and cannot be changed.  
IMPORTANT!  
• Make sure that the data you want to load is in one of  
the data folders described under the procedure in  
the preceding section of this manual. Note that if you  
put data into a music data play-only folder (such as  
the PLAY folder), you will not be able to load the file  
into Digital Piano memory.  
File Name  
Data Type  
(** = file number)  
USRRHY**  
USRMPS**  
User rhythms  
User Music Preset  
Recorder songs  
Registrations  
RECSNG**  
1.  
Insert the USB flash drive into the Digital  
Piano’s USB flash drive port.  
REGIST**  
2.  
Select the data you want to load.  
6.  
Press the  
(ENTER) button.  
dp  
To load this  
The message “Please Wait” will remain on the  
display while the save operation is being performed.  
Do not perform any Digital Piano operation while  
this message is on the display. “Complete” appears  
on the display after data save is complete.  
If there is already a file with the same name on the  
USB flash drive, a message “Replace?” will appear  
asking if you want to overwrite it with the new data.  
Do this:  
type of data*  
User rhythms Select from among user rhythms 001  
through 010 (page E-20).  
User songs  
Select from among user songs 001  
through 010 (page E-25).  
User Music  
Preset  
Select from among user Music Presets  
001 through 050 (page E-29).  
Press the  
(YES) button to overwrite or the  
(NO)  
ct  
ct  
button to cancel the save operation.  
Recorder songs Select from among recorder songs 1  
through 5 (page E-35).  
USB Flash Drive Data (File) Storage  
Registrations  
Press the  
(RHYTHM) button so the  
bn  
Locations  
RHYTHM lamp next to it is lit.  
The above procedure stores Digital Piano data in a data  
folder on the USB flash drive. The data folder where  
the data is stored depends on the data type.  
* For more information about data types, see page  
E-48.  
Data Type  
Data Folder Name  
RHYTHMAC  
MUSICLIB  
3.  
Hold down the  
button until the “LOAD” screen appears for  
the data you selected.  
(AUDIO RECORDER)  
ds  
User rhythms  
User songs  
User music presets  
Song recorder songs  
Registrations  
MUSICPST  
You can cancel the LOAD/SAVE operation any time  
by pressing the  
(EXIT) button.  
dm  
RECORDER  
REGISTMR  
4.  
5.  
Use the  
(w, q) buttons to select the file  
ct  
you want.  
The above data folders are created automatically  
when you format the USB flash drive on the Digital  
Piano (page E-50).  
Note that a file not in one of the data folders cannot  
be loaded, deleted, or renamed by the Digital Piano.  
You also will not be able to recall, delete, or play any  
file stored in any subfolder inside one of the data  
folders.  
Press the  
(ENTER) button.  
dp  
The message “Please Wait” will remain on the  
display while the load operation is being performed.  
Do not perform any Digital Piano operation while  
this message is on the display. “Complete” appears  
on the display after data loading is complete.  
If there already is a file with the same name in the  
Digital Piano memory, a message (Replace?) will  
appear asking if you want to replace it with the new  
data. Press the  
(YES) button to overwrite or the  
ct  
ct  
(NO) button to cancel the load operation.  
E-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Flash Drive  
Deleting Data from a USB  
Flash Drive  
Renaming a USB Flash Drive  
File  
Use the following procedure to delete USB flash drive  
data (files).  
Use the following procedure to change the file name of  
a file on a USB flash drive.  
1.  
Insert the USB flash drive into the Digital  
Piano’s USB flash drive port.  
1.  
Insert the USB flash drive into the Digital  
Piano’s USB flash drive port.  
2.  
3.  
4.  
Press the  
Press the  
Use the  
(FUNCTION) button.  
2.  
3.  
4.  
Press the  
Press the  
Use the  
(FUNCTION) button.  
cs  
ds  
cs  
ds  
(AUDIO RECORDER) button.  
(AUDIO RECORDER) button.  
(i) button to switch to the  
(i) button to switch to the  
do  
do  
“FileDelete” screen.  
“FileRename” screen.  
5.  
6.  
Press the (ENTER) button.  
This displays a screen for selecting data for deletion.  
5.  
6.  
Press the (ENTER) button.  
This displays a screen for changing the file name.  
dp  
dp  
Use the  
you want.  
(w, q) buttons to select the file  
(ENTER) button.  
Use the  
(w, q) buttons to select the file  
ct  
ct  
you want.  
7.  
Press the  
7.  
Use the  
(i) and  
(u) buttons to move  
dn  
dp  
do  
This will display a confirmation message “SURE?”.  
If you want to cancel the delete operation, press the  
the flashing cursor to the character you want  
to change, and then use the (w, q)  
ct  
(NO) or  
(EXIT) button.  
ct  
dm  
buttons to change the character.  
The characters you can select are shown below.  
8.  
Press the  
(YES) button.  
ct  
The message “Please Wait” will remain on the  
display while the delete operation is being  
performed. Do not perform any Digital Piano  
operation while this message is on the display.  
“Complete” appears on the display after deletion is  
complete.  
0
A
K
U
(
1
B
L
2
3
4
5
F
P
Z
}
6
G
Q
S
7
H
R
&
8
I
9
J
T
'
C
D
E
M N O  
S
_
`
V W X  
Y
{
)
-
^
@ ~  
8.  
9.  
After the file name is the way you want, press  
the (ENTER) button.  
This will display a confirmation message “SURE?”.  
If you want to cancel the renaming operation, press  
dp  
the  
(NO) or  
(EXIT) button.  
ct  
dm  
Press the  
(YES) button.  
ct  
The message “Please Wait” will remain on the  
display while the rename operation is being  
performed. Do not perform any Digital Piano  
operation while this message is on the display.  
“Complete” appears on the display after renaming is  
complete.  
E-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Flash Drive  
Playing Back All of the Songs in a Folder  
Playing Back a Song on a USB  
Flash Drive  
You can use the procedure below to play back a user  
song (page E-25) stored on a USB flash drive without  
loading the song into Digital Piano memory.  
Use the procedure below to select one of the four  
folders on a USB flash drive and play back all of the  
songs in the folder in succession.  
1.  
2.  
While holding down the  
(PART) button,  
bt  
press the  
(PLAY/STOP) button.  
bs  
USB Flash Drive Folders  
This will start tone demo tune playback (page E-23).  
Formatting a USB flash drive on the Digital Piano will  
automatically create a folder named PLAY on the USB  
flash drive. Also, four folders, named A, B, C, and D,  
are automatically created inside the PLAY folder. Place  
any song data you want to play on the Digital Piano  
into one of the four folders inside the PLAY folder. You  
can use the four folders to group your music data by  
family member, genre, or some other categories. Use  
While holding down the  
(FUNCTION)  
cs  
button, press the  
button.  
(AUDIO RECORDER)  
ds  
This will switch from tone demo tune playback to USB  
flash drive playback.  
While playback is in progress, you can use the  
dl  
through  
buttons (Folder A through Folder D) to  
do  
switch playback to another folder.  
buttons  
through  
(A through D) to select a folder.  
do  
dl  
To stop playback, press the  
(START/STOP)  
bs  
button.  
Folder Name  
Button Assignment  
A
B
(A)  
(B)  
(C)  
(D)  
dl  
dm  
dn  
do  
C
D
1.  
2.  
3.  
Store the music data you want to play in one  
of the USB flash drive folders.  
Insert the USB flash drive into the Digital  
Piano’s USB flash drive port.  
While holding down the  
(FUNCTION)  
cs  
button, press the  
button.  
(AUDIO RECORDER)  
ds  
4.  
Press one of the folder selection buttons (  
dl  
through ) to select the USB flash drive  
do  
folder (Folder A through Folder D) you want.  
This will display a song number and song name.  
5.  
6.  
Use the  
song you want.  
(w, q) buttons to select the  
ct  
Press the (PLAY/STOP) button.  
This will start playback.  
bs  
Each press of  
(PLAY/STOP) starts and stops  
bs  
playback.  
Fast forward, fast reverse, tempo changes, and other  
operations are the same as those during playback of a  
user song in Digital Piano memory. For details, see  
“Listening to Songs Loaded from an External Source”  
(page E-25).  
7.  
To exit the USB flash drive playback mode,  
hold down the  
(FUNCTION) button as you  
cs  
press the  
(AUDIO RECORDER) button.  
ds  
E-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Flash Drive  
Error Messages  
One of the error messages below appears on the display when a problem occurs.  
To clear an error message and return to the normal display, press the  
(EXIT) button.  
dm  
Display Message  
Cause  
Action  
1. The USB flash drive is not connected to the  
Digital Piano’s USB flash drive port.  
1. Correctly plug the USB flash drive into the USB  
flash drive port.  
2. The USB flash drive was removed while some  
operation was in progress.  
2. Do not remove the USB flash drive while any  
operation is in progress.  
No Media  
3. The USB flash drive is write-protected.  
3. Unprotect the USB flash drive.  
4. The USB flash drive has anti-virus software.  
4. Use a USB flash drive that does not have anti-  
virus software.  
There is no loadable file in the “MUSICLIB” folder or Move the file you want to load into the “MUSICLIB”  
No File  
no playable file in the “AUDIO” folder.  
folder or the file you want to play into the “AUDIO”  
folder (pages E-49 and E-50).  
You are attempting to save data to a USB flash drive Record something before performing a save  
No Data  
when there is no data to save.  
operation.  
• Change the name and then save the new data.  
• Remove the read-only attribute from the existing USB  
flash drive file and overwrite it with the new data.  
• Use a different USB flash drive.  
A read-only file with the same name you are trying  
to use is already stored on USB flash drive.  
Read Only  
Media Full  
There is not enough space available on the USB flash Delete some of the files on the USB flash drive to  
drive.  
make room for new data (page E-52) or use a  
different USB flash drive.  
1. There are too many files on the USB flash drive. 1. Delete some of the files on the USB flash drive to  
make room for new data.  
File Full  
2. There is a file named TAKE99.WAV in the  
“AUDIO” folder.  
2. Delete the WAV file in the “AUDIO” folder.  
You are attempting to play back SMF Format 2 song This Digital Piano supports playback of SMF Format  
Not SMF01  
Size Over  
data.  
0 or Format 1 only.  
The data on the USB flash drive is too big to play.  
This Digital Piano supports playback of song data  
files with a maximum size of 320 kbytes.  
1. The USB flash drive data is corrupted.  
Wrong Data  
Convert  
2. USB flash drive contains data that is not  
supported by this Digital Piano.  
There is not enough Digital Piano memory available Reduce the size of the song data.  
to convert a song recorder song to SMF data and  
store it on the USB flash drive.  
Example:  
Delete any tracks that are not required.  
1. The USB flash drive format is not compatible  
with this Digital Piano.  
1. Format the USB flash drive on the Digital Piano.  
Format  
2. The USB flash drive is corrupted.  
The USB flash drive is corrupted.  
You are attempting to rename a USB flash drive file Rename to a different file name.  
with a file name that is already used by another file  
on the USB flash drive.  
2. Use a different USB flash drive.  
Use a different USB flash drive.  
Media R/W  
File Name  
E-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Computer  
You can connect the Digital Piano to a computer and  
Connecting the Digital Piano  
exchange MIDI data between them. You can send play  
data from the Digital Piano to commercially available  
music software running on your computer, or you can  
send MIDI data from your computer to the Digital  
Piano for playback.  
to Your Computer  
IMPORTANT!  
• Make sure you follow the steps of the procedure  
below exactly. Connecting incorrectly can make data  
send and receive impossible.  
Minimum Computer System  
Requirements  
1.  
Turn off the Digital Piano and then start up  
your computer.  
The following shows the minimum computer system  
requirements for sending and receiving MIDI data.  
Check to make sure that your computer complies with  
these requirements before connecting the Digital Piano  
to it.  
Do not start up the music software on your computer  
yet!  
2.  
After starting up your computer, use a  
commercially available USB cable to connect  
it to the Digital Piano.  
z Operating System  
Windows® XP (SP2 or later)*1  
Windows Vista® *2  
Digital Piano USB port  
B connector  
Windows® 7 *3  
Windows® 8 *4  
USB cable  
(A-B type)  
Mac OS® X (10.3.9, 10.4.11, 10.5.X, 10.6.X, 10.7.X, 10.8.X)  
*1: Windows XP Home Edition  
Windows XP Professional (32-bit)  
*2: Windows Vista (32-bit)  
*3: Windows 7 (32-bit, 64-bit)  
*4: Windows 8 (32-bit, 64-bit)  
A connector  
Computer USB port  
3.  
Turn on the Digital Piano.  
z USB port  
If this is the first time you are connecting the Digital  
Piano to your computer, the driver software required  
to send and receive data will be installed on your  
computer automatically.  
IMPORTANT!  
• Never connect to a computer that does not conform  
to the above requirements. Doing so can cause  
problems with your computer.  
4.  
5.  
Start up commercially available music  
software on your computer.  
Configure the music software settings to  
select one of the following as the MIDI device.  
CASIO USB-MIDI : For Windows Vista, Windows 7,  
Windows 8, Mac OS X  
USB Audio Device: For Windows XP  
For information about how to select the MIDI device,  
see the user documentation that comes with the  
music software you are using.  
IMPORTANT!  
• Be sure to turn on the Digital Piano first before  
starting up your computer’s music software.  
E-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Computer  
NOTE  
Transferring Data between the  
Digital Piano and a Computer  
You can use the procedure below to transfer edited  
Auto Accompaniment data, recorder data, and other  
data from the Digital Piano to a computer for storage.  
You also can transfer standard MIDI files (SMF), as  
well as Auto Accompaniment data you downloaded  
from the CASIO website from your computer to Digital  
Piano memory.  
Once you are able to connect successfully, there is no  
problem with leaving the USB cable connected when  
you turn off your computer and/or Digital Piano.  
This Digital Piano conforms to General MIDI Level 1  
(GM).  
For detailed specifications and connections that  
apply to MIDI data send and receive by this Digital  
Piano, see the latest support information provided  
by the website at the following URL.  
Data Types Supported for Data Transfer  
Using MIDI  
The types of data that can be stored or imported are the  
same as those that can be saved to a USB flash drive  
from the Digital Piano (page E-48).*  
* Recorder songs (page E-35) cannot be converted to  
SMF data for storage on a computer.  
What is MIDI?  
The letters MIDI stand for Musical Instrument Digital  
Interface, which is the name of a worldwide standard  
for digital signals and connectors that makes it possible  
to exchange musical data between musical instruments  
and computers (machines) produced by different  
manufacturers.  
For details about the MIDI specifications of this Digital  
Piano, see the “MIDI Implementation” document at the  
website located at the URL below.  
IMPORTANT!  
• Turning off the Digital Piano while data is being  
saved or loaded can cause all data currently stored  
in Digital Piano memory (recorded songs, etc.) to be  
deleted. Take care so power is not turned off  
accidentally during data save and load operations. If  
data is deleted, it will take longer than normal for the  
Digital Piano to power up the next time you turn it on  
(page E-5).  
NOTE  
1.  
Remove the USB flash drive from the Digital  
Piano’s USB flash drive port (page E-49).  
You will not be able to transfer data between the  
Digital Piano and a computer while a USB flash drive  
is in the USB flash drive port.  
You can alter the Digital Piano’s MIDI setup by  
changing the MIDI data send channel or other  
settings. For details, see “MIDI Group” (page E-46).  
Use a separately available or commercially available  
MIDI cable to connect the MIDI terminals of your  
Digital Piano and another electronic musical  
instrument for exchange of MIDI data.  
2.  
3.  
Perform steps 1 through 3 under “Connecting  
the Digital Piano to Your Computer” to  
connect the Digital Piano to your computer  
(page E-55).  
While holding down the  
(FUNCTION)  
cs  
button, press the  
button.  
(USB DEVICE MODE)  
dr  
E-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Computer  
This will enter the storage mode, which enables data  
transfer with the connected computer. The  
(FUNCTION) button lamp will flash and the display  
5.  
6.  
Double-click “PIANO”.  
You now should see five data folders, one for each data  
type.  
cs  
will appear as shown below.  
To exit the storage mode at any time, press the  
(FUNCTION) button. This is the only button  
cs  
operation that is supported while the Digital Piano is  
in the storage mode.  
Referring to the table below, open the folder  
that corresponds to the type of data you want  
to transfer.  
You will not be able to enter the storage mode while  
any one of the following operations is in progress.  
Metronome, Auto Accompaniment, song playback,  
recorder (on), Auto Accompaniment editing, Music  
Preset editing, data transfer between the Digital  
Piano and USB flash drive.  
To load this  
type of data  
Open this data  
folder  
Data File Name  
BIDRHYnn.AC7  
(nn: 01 to 10)  
BIDRHYnn.Z00  
(nn: 01 to 10)  
BIDRHYnn.CKF  
(nn: 01 to 10)  
4.  
If your computer is running Windows XP,  
double-click “My Computer”.*  
Under “Devices with Removable Storage”, you should  
be able to see a folder representing Digital Piano  
memory or the USB flash drive loaded in the Digital  
Piano.  
User rhythms  
(page E-20)  
RHYTHMAC  
MUSICLIB  
BIDSNGnn.MID  
(nn: 01 to 10)  
(SMF Format 0 or  
Format 1)  
BIDSNGnn.CM2  
(nn: 01 to 10)  
*
Windows Vista, Windows 7, Windows 8:  
Double-click “Computer”.  
User songs  
(page E-25)  
Mac OS: Skip step 4 and double-click “PIANO” on  
your Mac desktop.  
(CASIO format)  
User Music Presets  
(page E-29)  
BIDMPSnn.MPS  
(nn: 01 to 50)  
MUSICPST  
RECORDER  
REGISTMR  
Recorder songs  
(page E-35)  
BIDRECnn.CSR  
(nn: 01 to 05)  
Registration  
(page E-33)  
BIDREGAL.CR6  
Data types and contents are the same as those when  
saving Digital Piano data to or loading it from a USB  
Flash Drive. See “USB Flash Drive” (page E-48) for  
more information.  
E-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a Computer  
7.  
File name extensions (.MID, .CM2, etc.) are  
not displayed under initial default Windows  
settings. Perform the procedure below to turn  
on display of file name extensions.  
(1) Open any one of the folders shown above.  
(2) Perform one of the following operations to display  
folder information.  
Using Auto Accompaniment Data from the  
CASIO Website  
You can download other model Auto Accompaniment  
data from the “Internet Data Expansion System” of the  
CASIO Music Site (http://music.casio.com/) and  
transfer it to Digital Piano memory.  
NOTE  
Windows XP:  
On the [Tools] menu at the top of the folder  
window, select [Folder Options].  
Windows Vista, Windows 7, Windows 8:  
On the left side of the folder window, click  
[Organize] and then select [Folder and Search  
Options].  
Since the accompaniment data is for other models,  
you may experience some abnormalities when  
playing it on this model.  
Copyrights  
(3) On the Folder Information window, click the  
[View] tab.  
(4) Under “Advanced Settings”, clear the “Hide  
extensions for known file types” check box and  
then click [OK].  
The rights of creators and copyright holders of music,  
images, computer programs, databases, and other  
data are protected by copyright laws. You are allowed  
to reproduce such works for personal or non-  
commercial use only. For any other purpose, all  
reproduction (including data format conversion),  
modification, transfer of reproductions, distribution  
over a network, or any other use without permission  
of the copyright holder exposes you to claims for  
damages and criminal prosecution for copyright  
infringement and violation of the author’s personal  
rights. Be sure to reproduce and otherwise use  
copyrighted works only in accordance with applicable  
copyright laws.  
8.  
After opening a data folder, perform either of  
the following operations to transfer data.  
8-1.To transfer data from Digital Piano  
memory to a computer, perform the  
required operation on your computer to  
copy the data from the Digital Piano  
folder you opened in step 6 of this  
procedure to another location on your  
computer.  
8-2.To load data from your computer to  
Digital Piano memory, first copy the data  
you want to load to the data folder you  
opened. Next, rename the file as shown  
in the “Data File Name” * column in the  
table under step 6 of this procedure.  
* The value you assign for “nn” in the data file name in  
this case specifies the user number (user rhythm, user  
song, recorder song, user preset) you want the data to  
be assigned to.  
Example: Renaming downloaded song data to  
BIDSNG04.CM2 to the MUSICLIB folder will  
make the data user song 004.  
9.  
Press the  
storage mode.  
(FUNCTION) button to exit the  
cs  
If you are using a Macintosh, drag the PIANO folder  
to the Trash and then press the Digital Piano’s  
cs  
(FUNCTION) button.  
E-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the Stand  
Unpacking  
Assembling the Stand  
*CAUTION  
PREPARATION  
The stand should be assembled by two people  
working together.  
Before starting assembly, check to make sure that  
you have all the parts shown below. You can find  
the screws in a plastic bag inside of the polystyrene  
foam packing material.  
This stand does not include any of the tools required  
for assembly. It is up to you to prepare a large  
Philips head (+) screwdriver for assembly.  
The stand should be assembled on a flat surface.  
Do not remove the tape securing the keyboard cover  
in place until assembly is complete. Removing the  
tape can cause the keyboard cover to open and close  
during assembly, creating the risk of personal injury  
to your hands and fingers.  
Take care that you do not pinch your fingers  
between parts when assembling them.  
B
When placing the digital piano on the floor, be sure  
to place it on something soft (a blanket, cushion,  
etc.). Do not place the digital piano directly onto the  
floor.  
C
A
D
E
NOTE  
H
Be sure to follow the proper procedure when  
assembling the stand.  
F
I
PREPARATION  
Pull the pedal unit cable out from the pedal unit  
.
E
G
J
E
A Side panel ........................... ×1 F Screws ................................ ×2  
B Side panel ........................... ×1 G Clips.................................... ×2  
C Back board.......................... ×1 H Brackets.............................. ×2  
D Screw caps.......................... ×6 I Screw caps ......................... ×2  
E Pedal unit ............................ ×1 J Screws ................................ ×4  
E-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the Stand  
1.  
Remove the four screws (two on each end)  
from back board C.  
3-1.If you plan to locate the piano and stand  
where it is not against a wall, you need to  
extend the anti-tip brackets at the base of  
side panels A and B. Remove the two  
screws (one on the outside of each side  
panel) that hold the brackets, and then slide  
the brackets as shown in the illustration. After  
extending the anti-tip brackets, reinstall the  
screws that secure them in place, but do not  
tighten the screws fully at this time.  
C
[Inside of side panels]  
2.  
Attach side panels A and B to back board  
C. Secure side panels A and B to the back  
board C using the screws you removed in  
step 1.  
Attach the side panels so the side of the back panel C  
where the joint connectors are inserted is facing  
towards the back of the stand.  
If you have trouble inserting a screw into a joint  
connector screw hole, use a screwdriver to adjust the  
joint connector by rotating it.  
IMPORTANT!  
Joint connectors  
When inserting a screw into a  
joint connector, keep your  
finger on the joint connector  
hole on the back of back board  
to make sure the joint  
C
connector does not come out  
of the hole.  
3-2.If you plan to locate the piano and stand  
against a wall, loosen the two screws (one on  
the outside of each side panel) that secure  
the brackets. You do not need to remove the  
screws in this case.  
B
A
In this case, you do not need to remove the screws.  
Just loosen them.  
C
C
E-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the Stand  
4.  
Insert angle brackets H into the gap between  
the anti-tipping bracket and the side panel.  
8.  
9.  
Cover the heads of the  
caps  
F
screws with screw  
I.  
I
H
After adjusting the position (height) of pedal  
unit , fully tighten the screws that you  
temporarily tightened in step 5, above.  
5.  
6.  
From the outside of side panels A and B,  
temporarily tighten the screws you loosened  
in step 3, above.  
E
10. Mount the piano onto the stand. Position the  
piano so the dowels on the top edges of side  
Mount pedal unit  
E
onto angle brackets  
H,  
panels  
A
and  
B
enter the dowel holes on the  
which you installed in step 5, above.  
bottom of the piano.  
E
Note that there is nothing anchoring the piano to the  
stand at this time. Take care to ensure that the piano  
does not fall off the stand.  
7.  
Use two  
pedal unit  
F
screws to secure both ends of the  
to the angle brackets.  
E
F
E-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the Stand  
IMPORTANT!  
To connect the cable  
• After mounting the piano onto the stand, check to  
make sure the sides of the piano and the side panels  
of the stand are position relative to each other as  
shown in the nearby illustration.  
1.  
Making sure that the pedal unit cable plug is  
oriented as shown in the illustration below,  
plug it into the pedal connector on the bottom  
of the digital piano.  
Press the plug fully into the connector as far as it will  
go.  
Use the clips G to secure the pedal cable to two  
locations on side panel B.  
G
11. Use the screws  
J
to securely fix the brackets  
at the top of side panels  
bottom of the piano.  
A
and  
B
to the  
To install the music stand  
1.  
Slide the music stand under the two bolts on  
the top of the digital piano as shown in the  
illustration and then tighten the bolts.  
J
J
12. After checking to make sure the six screws  
that secure side panels A and B are fully  
tightened, cover the heads of the screws with  
screw caps D.  
D
E-62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Troubleshooting  
See  
Page  
Problem  
Cause  
Action  
No sound is produced when I  
press a keyboard key.  
1. The VOLUME controller is set to  
1. Rotate the VOLUME controller more  
) E-5  
) E-6  
“MIN”.  
towards “MAX”.  
2. Headphones or an adaptor plug is 2. Disconnect whatever is connected to the  
plugged into one of the PHONES  
PHONES jack.  
jacks.  
The pitch of the Digital Piano is 1. The Digital Piano’s key setting is  
1. Change the key setting to “440.0 Hz”, or  
turn Digital Piano power off and then back  
on again.  
) E-45  
off.  
something other than “440.0 Hz”.  
2. Digital Piano tuning is incorrect.  
2. Adjust Digital Piano tuning, or turn the  
Digital Piano off and then back on again.  
) E-45  
) E-45  
3. A non-standard temperament  
setting is being used.  
3. Change the temperament setting to  
“00:Equal”, which is the standard modern  
tuning.  
4. Octave shift is enabled.  
4. Change the octave shift setting to 0.  
) E-10  
Tones and/or effects sound  
The “Setting Backup” feature is turned Turn off “Setting Backup”. Next, turn power off ) E-47  
strange. Turning power off and on.  
then back on again does not  
eliminate the problem.  
and then back on again.  
Example: Note intensity does not  
change even though I alter key  
pressure.  
I cannot transfer data after  
connecting the Digital Piano to  
a computer.  
1. Check to make sure that the USB cable is ) E-55  
connected to the Digital Piano and  
computer, and that the correct device is  
selected with your computer’s music  
software.  
2. Turn off the Digital Piano and then exit the  
music software on your computer. Next,  
turn the Digital Piano back on and then  
restart the music software on your  
computer.  
I cannot record chord  
accompaniment data on my  
computer.  
Accomp MIDI Out is turned off.  
Turn on Accomp MIDI Out.  
) E-46  
) E-54  
) E-55  
I cannot store data to a USB  
flash drive or load data from a  
USB flash drive.  
See “Error Messages”.  
Playback stops part way  
through while transferring song power cord caused data  
data from my computer.  
Digital noise from the USB cable or  
Stop song playback, disconnect the USB  
cable from the Digital Piano, and then  
reconnect it. Next, try playing back the song  
again.  
communication your computer and  
Digital Piano to be interrupted.  
If this does not solve the problem, quit the  
MIDI software you are using, disconnect the  
USB cable from the Digital Piano, and then  
reconnect it. Next, restart the MIDI software  
and then try playing back the song again.  
A tone’s quality and volume  
sounds slightly different  
depending where it is played on  
the keyboard.  
This is an unavoidable result of the digital sampling process,* and does not indicate malfunction.  
* Multiple digital samples are taken for the low range, middle range, and high range of the original  
musical instrument. Because of this, there may be a very slight difference in tonal quality and  
volume between sample ranges.  
When I press a button, the note Performing a button operation while playing with the Duet Mode, Auto Accompaniment, the  
that is sounding cuts out recorder, or other functions can cause such phenomena when the Digital Piano switches internal  
momentarily or there is a slight tone effects. It does not indicate malfunction.  
change in how effects are  
applied.  
E-63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
See  
Page  
Problem  
Cause  
Action  
Even though I play on different The ranges of certain tones are limited, which means that octaves change normally up to a certain  
ranges of the keyboard, the  
notes do not change octaves.  
low note or high note. With such a tone, the notes of the lowest octave will be repeated to the left of  
the lowest possible note, and the highest octave will be repeated to the right of the highest  
possible note. This is due do limitations in the range of the original musical instrument for each  
tone, and does not indicate malfunction of the Digital Piano.  
E-64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Product Specifications  
Model  
PX-780MBK  
Keyboard  
Maximum Polyphony  
Tones  
88-key piano keyboard, with Touch Response (3 types)  
128 notes  
250 (with Layer and Split)  
Effects  
Reverb (4 types), Chorus (4 types), Brilliance (–3 to 0 to 3), Hammer Response, Damper Resonance  
Metronome  
• Beats per measure: 0, 2, 3, 4, 5, 6  
• Tempo Range: 20 to 255  
Duet  
Adjustable tone range: 0 to 3 octaves for the left keyboard; –4 to –1 octaves for the right keyboard  
Auto Accompaniment  
• Built-in Rhythms: 180  
• User Rhythms: Up to 10 (Approximately 40KB*1 maximum per rhythm)  
• One Touch Presets: 180 types  
• Auto Harmonize: 12 types  
Demo Songs  
Music Library  
6 songs (tone demo songs)  
Number of Songs: 60  
User Songs: Up to 10 songs (320KB*1 maximum per song)  
Music Presets  
Built-in Presets: 300  
User Presets: Up to 50 (Approximately 8KB*1 maximum per preset)  
Registration  
96 (4 setups × 24 banks)  
Song Recorder  
• Functions: Real-time recording, playback  
• Number of Songs: 5  
• Number of Tracks: 17 (System Track + Tracks 01 through 16)  
• Capacity: Approximately 50,000 notes total (Up to approximately 10,000 notes per song)  
• Punch-in recording  
Audio Recorder  
• Real-time recording and playback to USB flash drive*2  
• Songs: 99 files  
• Approximately 25 minutes maximum recording per file.  
Pedals  
Damper (with half-pedal operation), Soft, Sostenuto  
Other Functions  
• Transpose: 1 octave (–12 to 00 to 12)  
• Tuning: A4 = 415.5 Hz to 440.0 Hz to 465.9 Hz  
• Octave Shift: 2 octaves  
• Temperaments: 17 types  
• Stretch Tune  
• Panel Lock  
MIDI  
16 multi-timbre received, GM Level 1 standard  
Pitch Bend Wheel  
USB Flash Drive  
Inputs/Outputs  
Pitch Bend Range: 00 to 12 semitones  
SMF playback, data storage, data loading, USB flash drive format, playback of audio data  
PHONES jacks: Stereo standard jacks × 2  
MIDI OUT/IN terminals  
LINE OUT R, L/MONO jacks: Standard jacks × 2  
Output impedance: 2.3KΩ  
Output voltage: 1.8V (RMS) MAX  
LINE IN R, L/MONO jacks: Standard jacks × 2  
Input impedance: 9.0KΩ  
Input voltage: 200mV  
• Power: 24V DC  
• USB port: Type B  
• USB flash drive port : Type A  
• Pedal connector  
E-65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Speakers  
φ 12cm × 2 + φ 5cm × 2 (Output 20W + 20W)  
Power Requirements  
AC Adaptor: AD-E24250LW  
• Auto Power Off: Approximately 4 hours after last operation. Auto Power Off can be disabled.  
Power Consumption  
Dimensions  
24V = 20W  
Digital Piano and Stand: 135.7 (W) × 29.9 (D) × 83.3 (H) cm (53 7/16 × 11 3/4 × 32 13  
/16 inch)  
Weight  
Digital Piano and Stand: approximately 31.5kg (69.4 lbs)  
*1 Based on 1KB = 1024bytes, 1MB = 10242 bytes  
*2 Linear PCM, 16bit, 44.1 kHz, stereo .WAV format  
• Specifications and designs are subject to change without notice.  
E-66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Any reproduction of the contents of this manual,  
Operating Precautions  
Be sure to read and observe the following operating  
precautions.  
either in part or its entirety, is prohibited. Except for  
your own, personal use, any other use of the  
contents of this manual without the consent of  
CASIO is prohibited under copyright laws.  
IN NO EVENT SHALL CASIO BE LIABLE FOR  
ANY DAMAGES WHATSOEVER (INCLUDING,  
WITHOUT LIMITATION, DAMAGES FOR LOSS  
OF PROFITS, BUSINESS INTERRUPTION, LOSS  
OF INFORMATION) ARISING OUT OF THE USE  
OF OR INABILITY TO USE THIS MANUAL OR  
PRODUCT, EVEN IF CASIO HAS BEEN ADVISED  
OF THE POSSIBILITY OF SUCH DAMAGES.  
The contents of this manual are subject to change  
without notice.  
Location  
Avoid the following locations for this product.  
Areas exposed to direct sunlight and high humidity  
Areas subjected to temperature extremes  
Near a radio, TV, video deck, or tuner  
The above devices will not cause malfunction of the  
product, but the product can cause interference in  
the audio or video of a nearby device.  
User Maintenance  
Never use benzine, alcohol, thinner, or other  
chemical agents to clean the product.  
To clean the product or its keyboard, wipe with a  
soft cloth moistened in a weak solution of water and  
a mild neutral detergent. Wring all excess moisture  
from the cloth before wiping.  
AC Adaptor Handling Precautions  
Use a power outlet that is easily accessible so you  
can unplug the AC adaptor when a malfunction  
occurs or whenever else you need to do so.  
The AC adaptor is intended for indoor use only. Do  
not use it where it might be exposed to splashing or  
moisture. Do not place any container, such as a  
flower vase, that contains liquid on the AC adaptor.  
Store the AC adaptor in a dry place.  
Use the AC adaptor in an open, well-ventilated area.  
Never cover the AC adaptor with newspaper, a table  
cloth, a curtain, or any other similar item.  
Unplug the AC adaptor from the power outlet if you  
do not plan to use the Digital Piano for a long time.  
Never try to repair the AC adaptor or modify it in  
any way.  
Included and Optional Accessories  
Use only accessories that are specified for use with this  
product. Use of unauthorized accessories creates the  
risk of fire, electric shock, and personal injury.  
Weld Lines  
Lines may be visible on the exterior of the product.  
These are “weld lines” that result from the plastic  
molding process. They are not cracks or scratches.  
AC adaptor operating environment  
Temperature: 0 to 40°C  
Humidity: 10% to 90% RH  
Output polarity:  
Musical Instrument Etiquette  
Always be aware of others around you whenever using  
this product. Be especially careful when playing late at  
night to keep the volume at levels that do not disturb  
others. Other steps you can take when playing late at  
night are closing windows and using headphones.  
E-67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
AC Adaptor Handling Precautions  
Model: AD-E24250LW  
1. Read these instructions.  
2. Keep these instructions on hand.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this product near water.  
6. Clean only with a dry cloth.  
7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers).  
8. Use only attachments and accessories specified by the manufacturer.  
9. Refer all servicing to qualified service personnel. Servicing is required after any of the following occurs:  
when the product is damaged, when the power supply cord or plug is damaged, when liquid is spilled into  
the product, when a foreign object falls into the product, when the product is exposed to rain or moisture,  
when the product does not operate normally, when the product is dropped.  
10. Do not allow the product to be exposed to dripping or splashing liquid. Do not place any object containing  
liquid on the product.  
11. Do not allow the electrical load output to exceed the label rating.  
12. Make sure the surrounding area is dry before plugging into a power source.  
13. Make sure the product is oriented correctly.  
14. Unplug the product during lightning storms or when you do not plan to use it for a long time.  
15. Do not allow product ventilation openings to become blocked. Install the product in accordance with the  
manufacturer’s instructions.  
16. Take care the power cord is located where it will not be stepped upon or bent severely, particularly in  
locations close to plugs and convenience receptacles, and in locations where it exits from the product.  
17. The AC adaptor should be plugged into a power outlet as close to the product as possible to allow  
immediate disconnection of the plug in case of emergency.  
The symbol below is an alert indicating un-insulated hazardous voltage inside the product’s enclosure, which  
may be sufficient to constitute the risk of electric shock to users.  
The symbol below is an alert indicating the presence of important operating and maintenance (servicing)  
instructions in the documentation that accompanies the product.  
*
E-68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Tone List/Lista de tonos  
Bank  
Select  
MSB/  
MSB de  
selección  
de banco  
Bank  
Select  
MSB/  
MSB de  
selección  
de banco  
Program  
Program  
Change/  
Cambio  
de  
Group  
Name/  
Nombre  
Group  
Number/  
Número  
Sequential  
Number/  
Número  
Group  
Name/  
Nombre  
Group  
Number/  
Número  
Sequential  
Number/  
Número  
Change/  
Cambio  
de  
Tone Name/  
Nombre del tono  
Tone Name/  
Nombre del tono  
del grupo de grupo secuencial  
del grupo de grupo secuencial  
programa  
programa  
GRAND PIANO  
VARIOUS  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
GRAND PIANO CONCERT  
GRAND PIANO STUDIO  
GRAND PIANO MODERN  
GRAND PIANO CLASSIC  
GRAND PIANO BRIGHT  
GRAND PIANO MELLOW  
GRAND PIANO DOLCE  
ROCK PIANO  
0
0
0
0
1
0
0
1
1
1
3
3
0
0
48  
54  
49  
50  
52  
51  
55  
48  
49  
51  
48  
49  
52  
53  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
015  
016  
017  
018  
019  
020  
021  
022  
023  
024  
025  
026  
027  
028  
029  
030  
031  
032  
033  
034  
035  
036  
037  
038  
039  
040  
041  
042  
043  
044  
045  
046  
047  
062  
063  
064  
065  
066  
067  
068  
069  
070  
071  
072  
073  
074  
075  
076  
077  
078  
079  
080  
081  
082  
083  
084  
085  
086  
087  
088  
089  
090  
091  
092  
093  
094  
095  
096  
097  
098  
099  
100  
101  
102  
103  
104  
105  
106  
107  
108  
ACOUSTIC BASS  
32  
32  
33  
33  
33  
34  
38  
24  
25  
25  
25  
26  
27  
27  
27  
27  
29  
65  
66  
65  
66  
71  
73  
56  
57  
61  
61  
62  
62  
81  
81  
80  
110  
15  
107  
105  
72  
77  
109  
104  
104  
20  
15  
111  
15  
105  
72  
48  
49  
48  
49  
50  
48  
48  
48  
48  
49  
50  
48  
49  
48  
50  
51  
48  
49  
49  
48  
48  
48  
48  
48  
48  
48  
49  
48  
49  
48  
49  
48  
56  
56  
56  
56  
56  
56  
56  
56  
57  
56  
58  
56  
59  
59  
57  
RIDE BASS  
FINGERED BASS 1  
FINGERED BASS 2  
FINGERED BASS 3  
PICKED BASS  
TRANCE BASS  
NYLON STR.GUITAR  
STEEL STR.GUITAR 1  
STEEL STR.GUITAR 2  
STEEL STR.GUITAR 3  
JAZZ GUITAR  
CLEAN GUITAR  
CHORUS CLEAN GUITAR  
CRUNCH ELEC.GUITAR 1  
CRUNCH ELEC.GUITAR 2  
OVERDRIVE GUITAR  
BREATHY ALTO SAX  
BREATHY TENOR SAX  
ALTO SAX  
LA PIANO  
DANCE PIANO  
HONKY-TONK  
OCTAVE PIANO  
STRINGS PIANO  
PIANO PAD  
ELEC PIANO  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
015  
016  
017  
015  
016  
017  
018  
019  
020  
021  
022  
023  
024  
025  
026  
027  
028  
029  
030  
031  
ELEC.PIANO 1  
4
5
48  
48  
51  
48  
49  
49  
50  
50  
53  
52  
48  
48  
49  
48  
49  
48  
49  
ELEC.PIANO 2  
60’S E.PIANO  
4
E.GRAND 80  
2
DYNO ELEC.PIANO  
FM ELEC.PIANO  
MELLOW E.PIANO  
POP ELEC.PIANO  
CHORUS E.PIANO  
SYNTH-STR.E.PIANO  
VIBRAPHONE  
4
5
TENOR SAX  
4
CLARINET  
5
FLUTE  
4
TRUMPET  
4
TROMBONE  
11  
7
STEREO BRASS  
BRASS SECTION  
SYNTH-BRASS  
80’S SYNTH-BRASS  
SAW LEAD  
CLAVI  
WAH CLAVI  
7
HARPSICHORD  
COUPLED HARPSICHORD  
MARIMBA  
6
6
12  
11  
MELLOW SAW LEAD  
SQUARE LEAD  
ER HU  
CHORUS VIBRAPHONE  
ORGAN  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
032  
033  
034  
035  
036  
037  
038  
039  
040  
041  
042  
043  
044  
045  
ROCK ORGAN 1  
JAZZ ORGAN  
16  
17  
16  
16  
16  
17  
17  
16  
16  
18  
16  
16  
19  
19  
49  
48  
48  
50  
51  
49  
50  
52  
53  
48  
54  
55  
48  
49  
YANG QIN  
ZHENG  
DRAWBAR ORGAN  
ROTARY DRAWBAR  
ROTARY ORGAN  
PERC.ORGAN  
PI PA  
DI ZI  
XIAO  
SHENG  
70’S ORGAN  
SITAR  
OVERDRIVE ORGAN  
TREMOLO ORGAN  
ROCK ORGAN 2  
ELEC.ORGAN  
TANPURA  
HARMONIUM  
SANTUR  
SHANAI  
FULL DRAWBAR  
CHURCH ORGAN  
CHAPEL ORGAN  
KANUN  
OUD  
NEY  
STRINGS  
GM TONES  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
015  
016  
046  
047  
048  
049  
050  
051  
052  
053  
054  
055  
056  
057  
058  
059  
060  
061  
STEREO STRINGS 1  
STEREO STRINGS 2  
STRING ENSEMBLE  
SYNTH-STRINGS  
70’S SYNTH-STR.  
80’S SYNTH-STR.  
VIOLIN SECTION  
CHOIR  
49  
48  
48  
50  
50  
50  
40  
52  
54  
90  
88  
88  
89  
89  
90  
99  
48  
49  
48  
48  
49  
50  
48  
48  
48  
48  
48  
49  
48  
49  
49  
48  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
015  
016  
017  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
GM PIANO 1  
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
GM PIANO 2  
GM PIANO 3  
2
GM HONKY-TONK  
GM E.PIANO 1  
GM E.PIANO 2  
GM HARPSICHORD  
GM CLAVI  
3
4
5
6
7
SYNTH-VOICE  
SYNTH-PAD  
GM CELESTA  
8
GM GLOCKENSPIEL  
GM MUSIC BOX  
GM VIBRAPHONE  
GM MARIMBA  
9
FANTASY  
10  
11  
12  
13  
14  
15  
16  
NEW AGE  
WARM PAD  
WARM VOX  
GM XYLOPHONE  
GM TUBULAR BELL  
GM DULCIMER  
GM ORGAN 1  
POLYSYNTH PAD  
ATMOSPHERE PAD  
A-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Bank  
Select  
MSB/  
MSB de  
selección  
de banco  
Bank  
Select  
MSB/  
MSB de  
selección  
de banco  
Program  
Change/  
Cambio  
de  
Program  
Change/  
Cambio  
de  
Group  
Name/  
Nombre  
Group  
Number/  
Número  
Sequential  
Number/  
Número  
Group  
Name/  
Nombre  
Group  
Number/  
Número  
Sequential  
Number/  
Número  
Tone Name/  
Nombre del tono  
Tone Name/  
Nombre del tono  
del grupo de grupo secuencial  
del grupo de grupo secuencial  
programa  
programa  
018  
019  
020  
021  
022  
023  
024  
025  
026  
027  
028  
029  
030  
031  
032  
033  
034  
035  
036  
037  
038  
039  
040  
041  
042  
043  
044  
045  
046  
047  
048  
049  
050  
051  
052  
053  
054  
055  
056  
057  
058  
059  
060  
061  
062  
063  
064  
065  
066  
067  
068  
069  
070  
071  
072  
073  
074  
075  
076  
077  
078  
079  
080  
081  
082  
083  
084  
085  
086  
087  
088  
089  
126  
127  
128  
129  
130  
131  
132  
133  
134  
135  
136  
137  
138  
139  
140  
141  
142  
143  
144  
145  
146  
147  
148  
149  
150  
151  
152  
153  
154  
155  
156  
157  
158  
159  
160  
161  
162  
163  
164  
165  
166  
167  
168  
169  
170  
171  
172  
173  
174  
175  
176  
177  
178  
179  
180  
181  
182  
183  
184  
185  
186  
187  
188  
189  
190  
191  
192  
193  
194  
195  
196  
197  
GM ORGAN 2  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
090  
091  
092  
093  
094  
095  
096  
097  
098  
099  
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
126  
127  
128  
129  
130  
131  
132  
133  
134  
135  
136  
137  
138  
139  
140  
141  
142  
198  
199  
200  
201  
202  
203  
204  
205  
206  
207  
208  
209  
210  
211  
212  
213  
214  
215  
216  
217  
218  
219  
220  
221  
222  
223  
224  
225  
226  
227  
228  
229  
230  
231  
232  
233  
234  
235  
236  
237  
238  
239  
240  
241  
242  
243  
244  
245  
246  
247  
248  
249  
250  
GM WARM PAD  
89  
90  
0
0
GM ORGAN 3  
GM POLYSYNTH  
GM SPACE CHOIR  
GM BOWED GLASS  
GM METAL PAD  
GM HALO PAD  
GM SWEEP PAD  
GM RAIN DROP  
GM SOUND TRACK  
GM CRYSTAL  
GM PIPE ORGAN  
GM REED ORGAN  
GM ACCORDION  
GM HARMONICA  
GM BANDONEON  
GM NYLON STR.GUITAR  
GM STEEL STR.GUITAR  
GM JAZZ GUITAR  
GM CLEAN GUITAR  
GM MUTE GUITAR  
GM OVERDRIVE GT  
GM DISTORTION GT  
GM GT HARMONICS  
GM ACOUSTIC BASS  
GM FINGERED BASS  
GM PICKED BASS  
GM FRETLESS BASS  
GM SLAP BASS 1  
GM SLAP BASS 2  
GM SYNTH-BASS 1  
GM SYNTH-BASS 2  
GM VIOLIN  
91  
0
92  
0
93  
0
94  
0
95  
0
96  
0
97  
0
98  
0
GM ATMOSPHERE  
GM BRIGHTNESS  
GM GOBLINS  
99  
0
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
126  
127  
0
0
0
GM ECHOES  
0
GM SF  
0
GM SITAR  
0
GM BANJO  
0
GM SHAMISEN  
GM KOTO  
0
0
GM THUMB PIANO  
GM BAGPIPE  
0
0
GM FIDDLE  
0
GM SHANAI  
0
GM TINKLE BELL  
GM AGOGO  
0
GM VIOLA  
0
GM CELLO  
GM STEEL DRUMS  
GM WOOD BLOCK  
GM TAIKO  
0
GM CONTRABASS  
GM TREMOLO STRINGS  
GM PIZZICATO  
0
0
GM MELODIC TOM  
GM SYNTH-DRUM  
GM REVERSE CYMBAL  
GM GT FRET NOISE  
GM BREATH NOISE  
GM SEASHORE  
GM BIRD  
0
GM HARP  
0
GM TIMPANI  
0
GM STRINGS 1  
0
GM STRINGS 2  
0
GM SYNTH-STRINGS 1  
GM SYNTH-STRINGS 2  
GM CHOIR AAHS  
GM VOICE DOO  
GM SYNTH-VOICE  
GM ORCHESTRA HIT  
GM TRUMPET  
0
0
GM TELEPHONE  
GM HELICOPTER  
GM APPLAUSE  
GM GUNSHOT  
STANDARD SET 1  
STANDARD SET 2  
STANDARD SET 3  
STANDARD SET 4  
ROOM SET  
0
0
0
0
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
120  
GM TROMBONE  
GM TUBA  
1
2
GM MUTE TRUMPET  
GM FRENCH HORN  
GM BRASS  
3
8
HIP-HOP SET  
9
GM SYNTH-BRASS 1  
GM SYNTH-BRASS 2  
GM SOPRANO SAX  
GM ALTO SAX  
POWER SET  
16  
ELECTRONIC SET  
SYNTH SET 1  
24  
25  
SYNTH SET 2  
30  
GM TENOR SAX  
GM BARITONE SAX  
GM OBOE  
TRANCE SET  
31  
JAZZ SET  
32  
BRUSH SET  
40  
GM ENGLISH HORN  
GM BASSOON  
ORCHESTRA SET  
48  
GM CLARINET  
GM PICCOLO  
GM FLUTE  
GM RECORDER  
GM PAN FLUTE  
GM BOTTLE BLOW  
GM SHAKUHACHI  
GM WHISTLE  
GM OCARINA  
GM SQUARE LEAD  
GM SAW LEAD  
GM CALLIOPE  
GM CHIFF LEAD  
GM CHARANG  
GM VOICE LEAD  
GM FIFTH LEAD  
GM BASS+LEAD  
GM FANTASY  
A-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
NOTE  
While sequential numbered tone 071 (STEEL  
STR.GUITAR 2) or 072 (STEEL STR.GUITAR 3) is  
selected, pressing multiple keys on the far left side of  
the keyboard will produce a guitar strumming  
sound. It does not indicate malfunction.  
See the “Drum Assignment List” (page A-4) for the  
percussion instrument assigned to each keyboard  
key when a drum set (Sequential Number 237 to 250)  
is selected.  
NOTA  
Si presiona múltiples teclas en el extremo izquierdo  
del teclado mientras están seleccionados los tonos  
secuenciales número 071 (STEEL STR. GUITAR 2) o  
072 (STEEL STR. GUITAR 3), producirá un sonido  
de rasgueo de guitarra. Esto no es ningún signo de  
anomalía.  
Consulte la “Lista de asignación de batería” (página  
A-4) para saber cuáles son los instrumentos de  
percusión asignados a cada tecla cuando se  
selecciona un ajuste de batería (números  
secuenciales 237 a 250).  
A-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
A-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Rhythm List/Lista de ritmos  
Group  
Number/  
Número de  
grupo  
Sequential  
Number/  
Número  
Group  
Number/  
Número de  
grupo  
Sequential  
Number/  
Número  
Group Name/  
Nombre del  
grupo  
Group Name/  
Nombre del  
grupo  
Rhythm name/  
Nombre del ritmo  
Rhythm name/  
Nombre del ritmo  
secuencial  
secuencial  
POPS/DANCE/ROCK  
POPS  
013  
014  
015  
016  
017  
018  
019  
020  
021  
058  
059  
060  
061  
062  
063  
064  
065  
066  
WALTZ 1  
WALTZ 2  
001  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
POP  
SLOW WALTZ  
VIENNESE WALTZ  
FRENCH WALTZ  
SERENADE  
TANGO  
002  
003  
004  
005  
006  
007  
008  
009  
010  
ACOUSTIC GUITAR POP  
FAST POP  
FUNK POP  
POP ROCK  
6/8 POP  
MARCH 1  
FAST SOUL  
SLOW SOUL  
60’s SOUL  
MARCH 2  
LATIN  
LATIN I  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
015  
LATIN II  
016  
017  
018  
019  
020  
021  
022  
023  
024  
025  
026  
POP SHUFFLE  
067  
068  
069  
070  
071  
072  
073  
074  
075  
076  
077  
078  
079  
080  
081  
BOSSA NOVA  
SLOW BOSSA NOVA  
BEGUINE  
8 BEAT/16 BEAT  
011  
011  
012  
013  
014  
015  
016  
017  
018  
019  
020  
021  
STRAIGHT 8 BEAT 1  
STRAIGHT 8 BEAT 2  
FUNK 8 BEAT  
MELLOW 8 BEAT  
GUITAR 8 BEAT  
8 BEAT  
012  
SAMBA 1  
013  
SAMBA 2  
014  
MAMBO  
015  
RHUMBA  
016  
CHA-CHA-CHA  
MERENGUE  
BOLERO  
017  
8 BEAT POP  
018  
OLDIES 8 BEAT  
60’s 8 BEAT  
019  
SALSA 1  
020  
16 BEAT  
SALSA 2  
021  
16 BEAT SHUFFLE  
REGGAE  
DANCE  
022  
POP REGGAE  
SKA  
022  
023  
024  
025  
026  
027  
028  
029  
HIP-HOP  
023  
DANCE POP  
DISCO POP  
TECHNO POP  
TRANCE  
024  
082  
083  
084  
085  
086  
087  
088  
089  
090  
091  
092  
REGGAETON 1  
REGGAETON 2  
CUMBIA  
025  
026  
027  
MODERN R&B  
MODERN DANCE  
DISCO SOUL  
CALYPSO  
FORRO  
028  
029  
PAGODE  
ROCK  
030  
BANDA  
030  
031  
032  
033  
034  
035  
036  
037  
038  
039  
040  
041  
042  
043  
044  
045  
STRAIGHT ROCK  
SHUFFLE ROCK  
SHUFFLE BLUES  
ROCK BLUES  
EP BLUES  
PASILLO  
031  
ARGENTINE CUMBIA  
PUNTA  
032  
033  
BACHATA  
034  
WORLD  
035  
SLOW BLUES  
SOFT ROCK  
WORLD I  
AMERICAN  
001  
036  
037  
LATIN ROCK  
SLOW ROCK  
50’s ROCK  
093  
094  
095  
096  
097  
DIXIE  
038  
002  
TEX-MEX  
039  
003  
FAST GOSPEL  
SLOW GOSPEL  
HAWAIIAN  
040  
50’s PIANO ROCK  
NEW ORLNS R&R  
60’s ROCK  
004  
041  
005  
042  
SPANISH/EASTERN EUROPEAN  
043  
ROCK  
006  
098  
099  
100  
101  
102  
PASODOBLE  
044  
70’s PIANO ROCK  
ROCK WALTZ  
007  
CAUCASIAN  
045  
008  
RUSSIAN CHANSON 1  
RUSSIAN CHANSON 2  
POLISH WALTZ  
JAZZ/EUROPEAN  
JAZZ  
001  
009  
010  
046  
047  
048  
049  
050  
051  
052  
053  
054  
055  
SLOW BIG BAND  
MIDDLE BIG BAND  
FAST BIG BAND  
ORCHESTRA SWING  
SWING  
ARABIC/ORIENTAL  
002  
003  
011  
012  
103  
104  
105  
106  
107  
108  
SIRTAKI  
MUS  
004  
013  
ADANI  
005  
014  
BALADI  
KHALIJI  
MALFOUF  
006  
SLOW SWING  
JAZZ WALTZ  
015  
007  
016  
008  
FOX TROT  
WORLD II  
INDIAN  
017  
009  
QUICKSTEP  
010  
JAZZ COMBO 1  
109  
110  
111  
112  
BHANGRA  
DADRA  
EUROPEAN  
011  
018  
056  
057  
SCHLAGER  
POLKA  
019  
GARBA  
012  
020  
KEHARWA  
A-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Group  
Group Name/  
Number/  
Sequential  
Number/  
Número  
Group  
Number/  
Número de  
grupo  
Sequential  
Number/  
Número  
Group Name/  
Nombre del  
grupo  
Rhythm name/  
Nombre del ritmo  
Rhythm name/  
Nombre del ritmo  
Nombre del  
Número de  
grupo  
grupo  
secuencial  
secuencial  
021  
022  
113  
114  
115  
DANDIYA  
011  
012  
013  
014  
015  
016  
017  
018  
019  
020  
171  
172  
173  
174  
175  
176  
177  
178  
179  
180  
PIANO ROCK & ROLL  
ARPEGGIO 1  
ARPEGGIO 2  
ARPEGGIO 3  
PIANO MARCH 1  
PIANO MARCH 2  
STRIDE PIANO  
WALTZ 3  
TEEN TAAL  
BHAJAN  
023  
CHINESE  
024  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
126  
127  
128  
129  
GUANGDONG  
JIANGNAN  
BEIJING  
025  
026  
027  
DONGBEIYANGGE  
JINGJU  
028  
WALTZ 4  
029  
HUANGMEIXI  
QINQIANG  
YUJU  
WALTZ 5  
030  
031  
032  
YAOZU  
NOTE  
033  
DAIZU  
Sequential number rhythms 171 through 180 do not  
sound unless a chord is being played.  
034  
MIAOZU  
035  
MENGGU  
XINJIANG  
ZANGZU  
036  
037  
NOTA  
SOUTHEAST ASIAN  
038  
039  
130  
131  
KRONCONG  
DANGDUT  
Los ritmos secuenciales números 171 al 180 no  
suenan a menos que se ejecute un acorde.  
JAPANESE  
040  
132  
ENKA  
COUNTRY/VARIOUS  
COUNTRY  
001  
133  
134  
135  
136  
MODERN COUNTRY  
COUNTRY 8 BEAT  
COUNTRY BALLAD  
COUNTRY SHUFFLE  
002  
003  
004  
FINGER PICKING  
COUNTRY  
005  
137  
006  
007  
138  
139  
COUNTRY WALTZ  
BLUEGRASS  
VARIOUS  
008  
140  
141  
142  
143  
144  
CHRISTMAS SONG  
CHRISTMAS WALTZ  
SCREEN SWING  
SYMPHONY  
009  
010  
011  
012  
STR QUARTET  
BALLAD  
BALLAD  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
015  
016  
145  
146  
147  
148  
149  
150  
151  
152  
153  
154  
155  
156  
157  
158  
159  
160  
PIANO ROCK BALLAD  
90’s BALLAD  
MODERN BALLAD  
ELECTRIC BALLAD  
SLOW BALLAD 1  
SLOW BALLAD 2  
R&B BALLAD  
16 BEAT BALLAD  
SOUL BALLAD  
POP BALLAD 1  
POP BALLAD 2  
PIANO WALTZ BALLAD  
90’s 6/8 BALLAD  
6/8 BALLAD 1  
6/8 BALLAD 2  
ROCK BALLAD  
PIANO RHYTHMS  
PIANO RHYTHMS  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
161  
162  
163  
164  
165  
166  
167  
168  
169  
170  
PIANO 8 BEAT  
PIANO BALLAD 1  
PIANO BALLAD 2  
EP BALLAD 1  
EP BALLAD 2  
BLUES BALLAD  
JAZZ COMBO 2  
JAZZ COMBO 3  
RAGTIME  
BOOGIE-WOOGIE  
A-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Song List/Lista de canciones  
Group  
Name/  
Group  
Number/  
Sequential  
Number/  
Group  
Name/  
Group  
Number/  
Sequential  
Number/  
Song Name/  
Song Name/  
Nombre Número de Número  
Nombre de la canción  
Nombre Número de Número  
Nombre de la canción  
del grupo  
grupo  
secuencial  
del grupo  
grupo  
secuencial  
A
022  
059  
No.13 [Études de Mécanisme Op.849]  
No.26 [Études de Mécanisme Op.849]  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
Nocturne Op.9-2  
023  
060  
Fantaisie-Impromptu Op.66  
Étude Op.10-3 “Chanson de l’adieu”  
Étude Op.10-5 “Black Keys”  
Étude Op.10-12 “Revolutionary”  
Étude Op.25-9 “Butterflies”  
Prélude Op.28-7  
Valse Op.64-1 “Petit Chien”  
Valse Op.64-2  
Moments Musicaux 3  
Impromptu Op.90-2  
Marche Militaire 1 (Duet)  
Frühlingslied [Lieder Ohne Worte Heft 5]  
Fröhlicher Landmann  
[Album fur die Jugend]  
014  
014  
Von fremden Ländern und Menschen  
[Kinderszenen]  
015  
016  
015  
016  
Träumerei [Kinderszenen]  
B
001  
002  
017  
018  
Tambourin  
Menuet BWV Anh.114  
[Clavierbüchlein der Anna Magdalena  
Bach]  
003  
004  
005  
019  
020  
021  
Inventio 1 BWV 772  
Inventio 8 BWV 779  
Inventio 13 BWV 784  
Praeludium 1 BWV 846  
[Das Wohltemperierte Klavier 1]  
006  
022  
007  
008  
009  
010  
011  
012  
013  
014  
015  
016  
017  
018  
019  
020  
021  
023  
024  
025  
026  
027  
028  
029  
030  
031  
032  
033  
034  
035  
036  
037  
Le Coucou  
Gavotte  
Sonatina Op.36-1 1st Mov.  
Sonatine Op.20-1 1st Mov.  
Sonate K.545 1st Mov.  
Sonate K.331 3rd Mov. “Turkish March”  
Rondo K.485  
Für Elise  
Marcia alla Turca  
Sonate Op.13 “Pathétique” 1st Mov.  
Sonate Op.13 “Pathétique” 2nd Mov.  
Sonate Op.13 “Pathétique” 3rd Mov.  
Sonate Op.27-2 “Moonlight” 1st Mov.  
Rhapsodie 2  
Waltz Op.39-15 (Duet)  
C
001  
002  
003  
004  
005  
006  
007  
008  
009  
010  
011  
012  
013  
014  
015  
016  
017  
018  
019  
020  
021  
038  
039  
040  
041  
042  
043  
044  
045  
046  
047  
048  
049  
050  
051  
052  
053  
054  
055  
056  
057  
058  
Liebesträume 3  
Blumenlied  
La Prière d’une Vierge  
Csikos Post  
Humoresque Op.101-7  
Melodie [Lyrische Stucke Heft 2]  
Sicilienne Op.78  
Berceuse [Dolly] (Duet)  
Arabesque 1  
La Fille aux Cheveux de Lin [Préludes]  
Passepied [Suite bergamasque]  
Gymnopédie 1  
Je Te Veux  
Salut d’Amour  
The Entertainer  
Maple Leaf Rag  
L’arabesque [25 Etüden Op.100]  
La Styrienne [25 Etüden Op.100]  
Ave Maria [25 Etüden Op.100]  
Le retour [25 Etüden Op.100]  
La chevaleresque [25 Etüden Op.100]  
A-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Music Preset List/Lista de preajustes musicales  
Group  
Name/  
Nombre  
del grupo  
Group  
Number/  
Númerode  
grupo  
Sequential  
Number/  
Número  
Group  
Name/  
Nombre  
del grupo  
Group  
Number/  
Númerode  
grupo  
75  
Sequential  
Number/  
Número  
secuencial  
Preset Name/  
Nombre de preajuste  
Preset Name/  
Nombre de preajuste  
secuencial  
1
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
16Bt Shuffle  
POPS  
1
76  
Heat Up  
1
Soft Pop  
77  
Hard Rock  
Grunge Rock  
Modern Rock  
R&R  
2
2
Winter Pop  
Oldies Pop  
Alpine Flora  
Gypsy  
78  
3
3
79  
4
4
80  
5
5
81  
Piano R&R  
Blues  
6
6
Rain Pop  
82  
7
7
Movie Waltz  
Funky Pop  
Love Pop  
60’s Pop  
83  
8 Bars Blues  
Riff Rock 1  
Riff Rock 2  
Riff Rock 3  
8
8
84  
9
9
85  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
DANCE  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
ROCK  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
86  
Rising Sun  
Pop Ska  
2
CLASSIC  
1
Weep Blues  
Cartoon  
87  
88  
Canon  
2
Air G String  
Je Te Veux  
Adagio  
Carol  
3
89  
My Life  
4
90  
Blue Love  
Xmas Pop  
Shuffle Pop1  
Shuffle Pop2  
70’s Soul  
5
91  
Spring  
6
92  
Ave Maria  
JesusBleibet  
Symphony 25  
Symphony 40  
HungriaDance  
Eine Kleine  
Pathetique  
Moonlight  
7
93  
8
94  
9
95  
70’s Pop  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
TRAD  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
LATIN  
61  
62  
96  
West Coast  
Bossa Pop  
Radio Pop  
Crazy Roll  
80’s Pop 1  
80’s Pop 2  
UK Pop 1  
UK Pop 2  
A Feeling  
Calling  
97  
98  
99  
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
PstlSymphony  
Ode To Joy  
Le Cygne  
Swan Lake  
Valse Fleurs  
Habanera  
Nocturne  
80’s EuroPop  
The World  
Mexican Pop  
Guitar Pop  
90’s Pop  
Etude  
FrenchCancan  
FantaisieImp  
Humoresque  
Pavane  
Wonder  
Hope & Glory  
Moldau  
Modern Pop 1  
Modern Pop 2  
MdrnPopRock  
FromNewWorld  
Reverie  
Nutcracker  
Liebestraume  
Gymnopedies  
Jupiter  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
Funky Disco  
Funky Clavi  
Disco Soul  
70’s Disco  
Disco Lady  
Staying  
Entertainer  
MapleLeafRag  
Up&Down  
80’s Disco  
80’sDancePop  
Bb Girl  
122  
123  
124  
125  
126  
127  
128  
129  
130  
131  
132  
133  
134  
135  
136  
137  
138  
139  
140  
141  
142  
143  
144  
145  
146  
Michael Row  
GrndpasClock  
Troika  
AuldLangSyne  
Aloha Oe  
Blv Disco  
Lady Jam  
Into Your H  
Euro Pop  
O Sole Mio  
Furusato  
SzlaDziweczk  
Battle Hymn  
Condor  
Modern Dance  
Trance  
ShuffleDance  
ScarboroFair  
Danny Boy  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
50’s Rock 1  
50’s Rock 2  
Heartache  
EP R&R  
Greensleeves  
Annie Laurie  
AmazingGrace  
WeWishU Xmas  
Silent Night  
Joy To World  
YankeeDoodle  
Clarnt Polka  
TaRaRaBoom  
Double Eagle  
Blauen Donau  
Yellow Rose  
BeautDreamer  
Pop R&B  
60’s Rock 1  
60’s Rock 2  
60’s Rock 3  
60’s Rock 4  
60’s Rock 5  
Get Rock  
Honky Rock  
Wild Rock  
Alligator  
Movie Rock  
Pop Rock  
147  
148  
Satellite  
Rio  
A-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Group  
Name/  
Nombre  
del grupo  
Group  
Number/  
Númerode  
grupo  
63  
Sequential  
Number/  
Número  
secuencial  
149  
Group  
Name/  
Nombre  
del grupo  
Group  
Number/  
Númerode  
grupo  
37  
Sequential  
Number/  
Número  
secuencial  
228  
Preset Name/  
Nombre de preajuste  
Preset Name/  
Nombre de preajuste  
Aqua  
Pop Ballad 2  
64  
150  
Single  
38  
229  
PianoBallad1  
PianoBallad2  
Musical Bld  
R Ballad  
65  
151  
Sea Shore  
Poor Pitch  
Mountain  
39  
230  
66  
152  
40  
231  
67  
153  
41  
232  
68  
154  
Heartless  
Carnival  
42  
233  
Love Song  
69  
155  
43  
234  
80’s Ballad1  
80’s Ballad2  
80’s Ballad3  
80’s Ballad4  
Friends  
70  
156  
Mythology  
Tico-Tico  
44  
235  
71  
157  
45  
236  
72  
158  
Beguine  
46  
237  
73  
159  
Amapola  
47  
238  
74  
160  
La Paloma  
Banana Boat  
Peanut  
48  
239  
Rock Ballad1  
Rock Ballad2  
Two Flames  
90’s Ballad1  
90’s Ballad2  
90’s Ballad3  
90’s SoulBld  
I Always  
75  
161  
49  
240  
76  
162  
50  
241  
77  
163  
A Cup Of  
51  
242  
78  
164  
Jamaica  
52  
243  
79  
165  
60’s Movie 1  
60’s Movie 2  
The No.5  
53  
244  
80  
166  
54  
245  
81  
167  
55  
246  
82  
168  
Everyday  
56  
247  
6/8 Ballad  
83  
169  
Kiss Me  
57  
248  
Wind Ballad  
90’s 6/8 Bld  
My Ballad  
84  
170  
El Tango  
58  
249  
85  
171  
El Choclo  
Reggae 1  
Reggae 2  
Pop Reggae 1  
Pop Reggae 2  
Latin Rock 1  
Latin Rock 2  
Modern Latin  
59  
250  
86  
172  
60  
251  
MdrnSoulBld1  
MdrnSoulBld2  
Mdrn Pf Bld  
Rap Ballad  
Dance Ballad  
MdrnRock Bld  
Slow Ballad  
90’s R&B Bld  
87  
173  
61  
252  
88  
174  
62  
253  
89  
175  
63  
254  
90  
176  
64  
255  
91  
177  
65  
256  
92  
178  
66  
257  
COUNTRY  
93  
67  
258  
179  
180  
181  
182  
183  
184  
185  
186  
187  
188  
189  
190  
191  
US Folk 1  
US Folk 2  
JAZZ  
68  
94  
259  
260  
261  
262  
263  
264  
265  
266  
267  
268  
269  
270  
271  
272  
273  
274  
275  
276  
277  
278  
279  
280  
281  
282  
283  
284  
285  
286  
287  
288  
289  
290  
291  
292  
293  
294  
295  
296  
297  
298  
299  
300  
My Swing  
95  
50’s Country  
70’s Country  
60’s Folk  
69  
Your Things  
Angel  
96  
70  
97  
71  
Time Passes  
Piano Trio  
Goodbye  
98  
Tree  
72  
99  
A Friend  
73  
100  
101  
102  
103  
104  
105  
Cowboy  
74  
Marine Dance  
Vine Days  
TraneChanges  
RhythmChange  
Swing Mood  
The Big Mood  
Brown Jug  
Jazz Club  
Country Bld1  
Country Bld2  
Country Bld3  
CountryWaltz  
Mdrn Country  
75  
76  
77  
78  
79  
3
80  
BALLAD  
1
81  
192  
193  
194  
195  
196  
197  
198  
199  
200  
201  
202  
203  
204  
205  
206  
207  
208  
209  
210  
211  
212  
213  
214  
215  
216  
217  
218  
219  
220  
221  
222  
223  
224  
225  
226  
227  
Love Ballad  
R&B Ballad  
Soul Ballad  
Blues Ballad  
MovieBallad1  
MovieBallad2  
MovieBallad3  
Xmas Ballad  
Love Me  
82  
All Day Long  
Avenue  
2
83  
3
84  
Big Band 1  
Big Band 2  
Jazz Waltz 1  
Jazz Waltz 2  
Jazz Waltz 3  
Mode Jazz  
Tea Time  
4
85  
5
86  
6
87  
7
88  
8
89  
9
90  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
Oldies Bld 1  
Oldies Bld 2  
Oldies Bld 3  
Oldies Bld 4  
E World  
91  
Welcome Home  
Jazz Opera  
NY City  
92  
93  
94  
Soul & Jazz  
Loneliness  
Foggy  
95  
Guitar Bld 1  
Guitar Bld 2  
Moon Waltz  
Theme  
96  
97  
Moon Swing  
Jazz Ballad1  
Jazz Ballad2  
Jazz Ballad3  
PatheticTrip  
Night Sky  
98  
99  
Paradise  
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
60’s Ballad1  
60’s Ballad2  
Baroque Bld  
FrenchBallad  
Everywhere  
Wonderful  
Twilight  
Blues in F  
Blues in Bb  
Blues in C  
II-V  
70’s Ballad1  
70’s Ballad2  
70’s Ballad3  
My Song  
II-V-I  
Minor Blues  
Peace  
Without  
Soundtrack  
Soft Ballad  
Memories  
Minor Ballad  
Pop Ballad 1  
A-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
Fingered 3, Full Range Chords/  
Acordes Fingered 3, Full Range  
Fingering Guide/  
Guía de digitación  
In addition to the chords that can be fingered with  
Fingered 1 and Fingered 2, the following chords also  
are recognized.  
Fingered 1, Fingered 2 Chords/  
Acordes Fingered 1, Fingered 2  
Además de los acordes que se pueden digitar con  
Fingered 1 y Fingered 2, también se pueden reconocer  
los siguientes acordes.  
C
#
b
b
#
C
D
C
E
C
F
C
G
C
A
B
B
C
C m Dm Fm  
Cm  
Cdim  
C
C
C
C
C
C
b
b
b
Gm Am B m Ddim A 7 F7 Fm7 Gm7 A add9  
C
C
C
C
C
C
C
C
C
Caug *3  
NOTE  
Csus4 *3  
With Fingered 3, the lowest note fingered is  
interpreted as the base note. Inverted forms are not  
supported.  
Csus2 *3  
C7  
With Full Range Chord, when the lowest fingered is  
a certain distance from the neighboring note, the  
chord is interpreted as a fraction chord.  
Unlike Fingered 1, 2, and 3, Full Range Chord  
requires pressing of at least three keys to form a  
chord.  
Cm7 *3  
CM7  
Cm7b5 *3  
NOTA  
Con Fingered 3, la nota más baja digitada se  
interpreta como nota base. No se pueden usar  
formas invertidas.  
C7b5 *3  
Con Full Range Chord, cuando la nota digitada más  
baja se encuentre a cierta distancia de la nota  
adyacente, el acorde se interpreta como un acorde  
bitonal.  
C7sus4  
Cadd9  
A diferencia de Fingered 1, 2, y 3, Full Range Chord  
requiere la pulsación de tres teclas como mínimo  
para formar un acorde.  
Cmadd9  
CmM7  
Cdim7 *3  
C69 *3  
C6 *1 *3  
Cm6 *2 *3  
*1With Fingered 2, interpreted as Am7.  
b
*2With Fingered 2, interpreted as Am7 5.  
*3Inverted form not supported in some cases.  
*1Con Fingered 2, se interpreta como Am7.  
b
*2Con Fingered 2, se interpreta como Am7 5.  
*3En algunos casos no se puede usar de forma  
invertida.  
A-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix/Apéndice  
A-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This recycle mark indicates that the packaging conforms to  
the environmental protection legislation in Germany.  
Esta marca de reciclaje indica que el empaquetado se  
ajusta a la legislación de protección ambiental en Alemania.  
C
MA1212-A Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Beko Washer WMY 9048 LB1 User Manual
Belkin Network Card F5D9000 User Manual
Belkin Switch PF31L User Manual
Black Decker Iron F920 User Manual
Bogen Stereo Amplifier V100 User Manual
Bosch Power Tools Saw 1584DVS User Manual
Brother Sewing Machine 342Fi User Manual
Cal Flame Oven LTR20091039 User Manual
Canon All in One Printer 6987B002 User Manual
Celestron Telescope CGE1100 User Manual