E
Digital Camera
User’s Guide
K1160PCM2DMX
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of YouTube Uploader for
CASIO.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel used for the monitor screen and viewfinder employs high-
precision technology that provides a pixel yield of 99.99%. This means that some
very small number of pixels may not light or may remain lit at all times. This is due to
the characteristics of the liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Contents
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
What is a digital camera? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Attaching the Lens Cap and Strap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
To load the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Specifying the Battery Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
To turn power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
To turn off the camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
To shoot a snapshot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Deleting Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
To delete a single file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
To delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Selecting a Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Selecting the Exposure Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size) . . 31
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Flash) . . 35
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO) . . 38
Shooting with Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . 46
Using Continuous Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
B
4
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Recording a High-definition Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Recording a High-speed Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
What is BEST SHOT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Some Sample Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
To shoot with BEST SHOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Basic Multi-motion image Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Shooting an Image in Accordance with
Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
REC Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (REC) . . 78
❚
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer). . . 78
Reducing the Effects of Camera and
Subject Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Anti Shake). . . 79
Configuring the Continuous Shutter Image
❚
Save Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Save CS Images). . . 82
Shooting with Quick Shutter . . . . . . . . . . . . . . . . . . . . . . . . .(Quick Shutter). . . 83
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Review). . . 83
Displaying the On-screen Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Grid). . . 83
Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help). . . 84
Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quality) . . 85
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
B
5
Specifying Flash Intensity . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Intensity). . . 86
Turning On Flash Assist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Assist). . . 86
Using Built-in Color Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Color Filter). . . 86
Controlling Color Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . (Saturation). . . 87
Adjusting Image Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Contrast). . . 87
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Deleting Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Zooming an On-screen Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Displaying the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . 102
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Resize) . 102
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . 103
Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Using DPOF to Specify Images to be Printed and
the Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
B
6
Uploading Movie Files to YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Transferring Images Automatically and Managing Them
❚
on Your Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 130
Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
To replace the batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
B
7
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
To replace the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Monitor Screen Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
B
8
Quick Start Basics
What is a digital camera?
A digital camera stores images on a memory card, so you can record and
delete images a countless number of times.
Record
Delete
Play
You can use the images you record in a variety of different ways.
Store images on your
computer.
Print images.
Attach images to e-mail.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
9
What you can do with your CASIO camera
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following three main functions.
High-speed Continuous Shutter
Prerecord (Still image)
Now you can shoot continuous high-resolution
images at the amazing speed of 40 images per
second. Prerecord (Still image) pre-records images
to ensure you are almost never too late with the
shutter button.
See page 50 for more information.
High-speed Movies
Movies can be recorded at up to 1000 frames per
second. This makes it possible to clearly view
phenomena that are invisible to the human eye, in
slow motion.
HD Movie Recording
You can record movies in high-quality HD.
x
(1280 720 pixels 30 fps)
See page 59 for more information.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Attaching the Lens Cap and Strap
Be sure to attach the lens cap and strap to the camera before using it.
. Attaching the Lens Cap
Always keep the lens cap on the
lens whenever you are not using
the camera. Always leave the lens
cap on the lens when the camera is
Large loop
turned off and the lens is retracted.
• Attach the lens cap holder to the
strap or the strap ring. This
Lens cap
protects against accidental loss
of the lens cap.
Cap holder
• Never turn on camera power with
the lens cap affixed to the lens.
Small loop
. Attaching the strap
• Attach either end of the strap to the two strap rings on
the sides of the camera as shown in the illustration.
• After you are finished pull on the strap to test it and to
make sure it does not come loose.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
11
To load the batteries
Use one of the following battery types.
• Four AA-size alkaline batteries: LR6
Recommended
– Panasonic LR6 (Panasonic Corporation)
– DURACELL ULTRA (MX1500) (DURACELL,div of P&G Inc.)
• Four AA-size rechargeable Ni-MH (nickel-metal hydride) batteries: HR6
Recommended
– SANYO eneloop (SANYO Electric Co.,Ltd.)
– DURACELL RECHARGEABLE (DURACELL,div of P&G Inc.)
– ENERGIZER RECHARGEABLE (Energizer Holdings,Inc.)
* Proper operation cannot be guaranteed if you use any other type of battery other than
that noted above.
IMPORTANT!
• When being powered by AA-size alkaline batteries (LR6), the camera may not
operate at all at temperatures of 5°C (41°F) or lower.
• When charging rechargeable batteries, use only the charger specified for each
battery type.
• Do not use manganese batteries to power this camera. Use only the specified
types of AA-size batteries.
1. Open the battery cover.
Lock
Slide the lock in the direction indicated by the arrow
and the battery cover will open.
2. Load the batteries.
Be sure to keep all four batteries together as a set at
all times, for both charging and powering the camera.
Mixing batteries from different sets can shorten
overall battery life and cause malfunction of the
camera.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
B
12
3. Close the battery cover.
• For information about how to replace the batteries,
see page 146.
IMPORTANT!
• Before using the camera, you must specify the type of battery type (alkaline,
Ni-MH) you are using. Specifying the wrong battery type setting will shorten the life
of the batteries you are using. Make sure you specify the battery type setting
About rechargeable batteries
Use only the rechargeable Ni-MH batteries that are specifically recommended for this
camera. Proper camera operation is not guaranteed when other rechargeable
batteries are used.
IMPORTANT!
• Batteries cannot be charged while they are loaded in the camera.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
Remaining Power
Battery Indicator
Indicator Color
High
Low
*
*
*
*
Cyan
*
Amber
Red
*
Red
The flash will take longer than normal to charge if it is being used when the battery
level indicator is showing
Type” setting (page 15).
or
while “Alkaline” is selected for the “Battery
indicates that the flash is disabled. Replace batteries as soon as possible.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about one day with no power supplied while the batteries
are dead will cause its date and time settings to be cleared. You will have to
re-configure the settings after power is restored.
• Certain camera operating conditions and battery can cause the battery level
indicator to indicate the battery level incorrectly. In this case, the camera may
suddenly shut down without retracting the lens. If this happens, replace or charge
the batteries and configure the correct “Battery Type” setting.
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (flash off) for the flash setting
• Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 131, 131).
• Avoid unnecessary optical zoom operations.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Specifying the Battery Type
Your camera is designed to optimize its operation in accordance with the type of
batteries you are using to power it. Specifying the wrong battery type, can cause
power to turn off without retracting the lens and incorrect indication of remaining
battery power. Proper operation of the camera is not guaranteed when the wrong
battery type is specified.
1. Press [ON/OFF] to turn on the camera.
2. Press [MENU].
3. Use [4] and [6] to select the “Set Up” tab.
4. Use [8] and [2] to select “Battery Type” and then press [6].
5. Use [8] and [2] to select the type of battery you are using, and then
press [SET].
Alkaline
Ni-MH
AA-size alkaline (LR6)
AA-size rechargeable Ni-MH (nickel metal hydride) (HR6)
Configuring the Display Language the First Time You Turn On
the Camera
The first time you load batteries into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
1. Press [ON/OFF] to turn on the camera.
[ON/OFF]
(Power)
8
=
?
4
=
6
?
?
=
[
]
SET
2
=
?
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
15
2. Use [8], [2], [4], and [6] to select the language you want and then
press [SET].
3. Use [8], [2], [4], and [6] to select the area
where you will be using the camera and then
press [SET].
The selected area is highlighted in red.
4. Use [8] and [2] to select the city where you will
be using the camera and then press [SET].
5. Use [8] and [2] to select the summer time (DST) setting you want and
then press [SET].
6. Use [8] and [2] to select a date style and then press [SET].
Example: 19. 12. 09
YY/MM/DD * 09/12/19
DD/MM/YY * 19/12/09
MM/DD/YY * 12/19/09
7. Set the date and the time.
Use [4] and [6] to select the setting you want to change and then use [8] and
[2] to change it.
To switch between 12-hour and 24-hour format, press [BS].
8. Press [SET].
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Preparing a Memory Card
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
Supported Memory Cards
– SD Memory Card
– SDHC Memory Card
– MMC (MultiMediaCard)
– MMCplus (MultiMediaCardplus)
Use one of the above types of memory card.
• Use only SD cards that are compliant with the SD Card Association specification.
. Memory Card Handling Precautions
Certain types of cards can slow down processing speeds, and even can make it
impossible to store High Quality movies correctly. Also, use of certain types of
memory cards slows down data transfer and increases the time it takes to record
0
movie data, which can result in movie frames being dropped. The “ REC” indicator
on the monitor screen turns yellow to indicate that frames are being dropped. In order
to avoid problems such as these, use of an Ultra High-Speed Type SD memory card
is recommended. Note, however that CASIO makes no guarantees about the
operation of any Ultra High-Speed Type SD memory card used with this camera.
To load a memory card
1. Press [ON/OFF] to turn off the camera and then
open the memory card slot cover.
Pressing the memory card slot cover, slide it in the
direction indicated by the arrow.
1
2
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
B
17
2. Load a memory card.
Positioning the memory card so
its back is facing in the same
direction as the monitor screen
side of the camera, slide it into
the card slot as far as it will go,
until you hear it click securely
into place.
Front
Back
3. Close the memory card slot cover.
Pressing the memory card slot cover against the camera,
slide it closed.
• For information about how to replace the memory card,
see page 151.
2
1
IMPORTANT!
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, remove the batteries, and contact your retailer or nearest CASIO
authorized service center.
To format (initialize) a new memory card
You need to format a new memory card before using it for the first time.
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “Format” and then press [6].
3. Use [8] and [2] to select “Format” and then press [SET].
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a memory card on
a computer and then using it in the camera can slow down data processing by the
camera. In the case of an SD or SDHC memory card, formatting on a computer can
result in non-conformity with the SD format, causing problems with compatibility,
operation, etc.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
B
18
Turning the Camera On and Off
To turn power on
To enter the REC mode, press [ON/OFF]
(Power) or [r] (REC). To enter the PLAY
mode, press [p] (PLAY).
[ON/OFF] (Power)
Back lamp
The back lamp will light (green) momentarily and
the camera will turn on. If you are entering the
REC mode, the lens will extend from the camera
at this time.
• Pressing [p] (PLAY) while in the REC mode
switches to the PLAY mode.
• The Sleep function or Auto Power Off (pages
you do not perform any operation for a preset
amount of time.
[p] (PLAY)
[r] (REC)
To turn off the camera
Press [ON/OFF] (Power).
• You can configure the camera so power does not turn on when you press [r]
(REC) or [p] (PLAY). You also can configure the camera to turn off when you
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
19
B
To shoot a snapshot
Diopter dial
[r] (REC)
Mode dial
Shutter button
[EVF/LCD]
[SET]
Viewfinder
Monitor screen
[8] [2] [4] [6]
1. Remove the lens cap and then press [r] (REC) to turn on the camera.
2. Set the mode dial to t (Single Shot).
3. Press [8] .
4. Use [8] and [2] to select the top option in the
control panel (Exposure mode).
5. Use [4] and [6] to select t (Auto) and then
Snapshot mode icon
press [SET].
• You can use either monitor screen or viewfinder to
compose the image. Each press of the
[EVF/LCD] button cycles through the available
monitor screen and viewfinder on/off settings (page
136). If the image in the viewfinder appears blurry,
use the diopter dial to adjust it.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
20
6. Point the camera
Zoom controller
at the subject.
You can zoom the
image, if you want.
z Telephoto
w Wide Angle
7. Half-press the shutter
Back lamp
button to focus the image.
When focus is complete, the
camera will beep, the back lamp
will light green, and the focus
frame will turn green.
Focus frame
Half-press
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed
at. Mastering how much pressure is required
for a half-press and a full-press of the shutter
button is an important technique for good-
looking images.
Press lightly
until the
button stops.
Beep, beep (Image is in focus.)
8. Continuing to keep the camera still, press the shutter button the rest of
the way down.
This records the snapshot.
Full-press
Snap (Image is recorded.)
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
21
IMPORTANT!
A
• While the “Anti Shake” setting is “D Auto” or “
Camera AS”, half pressing the
shutter will cause the camera to vibrate and emit an operation sound. This is
normal and does not indicate malfunction (page 79).
. Using Quick Shutter
Fully pressing the shutting button without waiting for Auto Focus to operate will record
• With Quick Shutter, the camera focuses faster than normal Auto Focus, which
means you can capture quick moving action more easily. Note, however, that some
images may be out of focus when Quick Shutter is used.
• Whenever possible, take a little extra time to half-press the shutter button in order
to ensure proper focus.
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.) Point the camera at the
subject and try to focus again.
. If the subject is not in the center of the frame...
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Holding the Camera Correctly
Your images will not come out clearly if you
move the camera when you press the shutter
button. When pressing the shutter button, be
sure to hold the camera as shown in the
illustration near by, and keep it still by
pressing your arms firmly against your sides
as you shoot.
Vertical
Horizontal
Holding the camera still, carefully press the
shutter button and take care to avoid all
movement as the shutter releases and for a
few moments after it releases. This is especially important when available lighting is
low, which slows down the shutter speed.
IMPORTANT!
• Never touch the lens-barrel unit, except for cleaning. Never hold the camera by the
lens when aiming it or transporting it.
NOTE
• Take care that your fingers and the strap
do not cover any of the areas indicated in
the illustration.
Strap
• To protect against accidentally dropping
Microphone
the camera, attach the strap and make sure
it is around your neck while you are
operating the camera.
• Never swing the camera around by its
strap.
Flash
• The supplied strap is intended for use with
this camera only. Never use it for any other
purpose.
Lens
Front lamp
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Viewing Snapshots
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about images recorded using continuous shutter (CS), see page
1. Press [p] (PLAY) to enter
[p] (PLAY)
the PLAY mode.
• This will display one of the
snapshots currently stored in
memory.
• Information about the
displayed snapshot also is
included (page 157).
• You also can clear the information to view only the snapshot.
• You can zoom in on the image by sliding the zoom controller towards z (page
92). If you are recording a snapshot that is very important to you, it is
recommended that you zoom the image and check its details after recording it.
2. Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
[6]
[6]
[4]
[4]
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Deleting Images
If memory becomes full, you can delete images you no longer need in order to free up
storage and record more images.
• Remember that a file (image) delete operation cannot be undone.
• For information about images recorded using continuous shutter (CS), see page
To delete a single file
1. Press [p] (PLAY) to enter the PLAY mode and then
press [2] (
).
2. Use [4] and [6] to scroll through the files until the one you want to
delete is displayed.
3. Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [MENU].
all of the images in the currently display CS group will be deleted.
To delete all files
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] (
2. Use [8] and [2] to select “All Files Delete” and then press [SET].
).
3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files.
This will cause the message “There are no files” to appear.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Snapshot Shooting Precautions
Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
• If unwanted light is shining directly onto the lens, shade the lens with your hand.
Monitor Screen when Shooting Snapshots
• The image that appears on the monitor screen is for image composition. The actual
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Auto Focus Restrictions
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Subject that is too far away for light from the AF assist lamp to reach
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
46).
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Snapshot Tutorial
Selecting a Recording Mode
Your camera has a variety of
different recording modes. Before
shooting, use the mode dial to
select the recording mode that suits
the type of subject you are trying to
record.
Mode dial
Snapshot Modes
Movie Modes
This mode will record consecutive images while firing the flash. See
ª
Flash CS
This mode continues to shoot images as long as you keep the
shutter button depressed, and you can change the shooting speed
while recording is in progress. You can record up to 40 images. In
this mode, half-pressing the shutter button starts continual pre-
recording of images to a temporary buffer. Then when you press
the shutter button the rest of the way down, the camera saves the
buffer contents and perform real-time continuous shutter recording
details.
×
High-
speed CS
Continuous shutter recording is disabled when this mode is
selected. Each press of the shutter button records a single image.
t
Single
Shot
©
³
HS
HD/STD
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
27
Using the Control Panel
The control panel can be used to configure camera settings.
1. In the REC mode, press
[8] [2] [4] [6]
Control panel
1
2
3
4
5
6
7
8
9
[8].
2. Use [8] and [2] to select
the setting you want to
change.
This will select one of the
control panel icons and display
its settings.
[SET]
1
2
3
4
5
6
7
8
Metering mode (page 41)
AF area (page 41)
Flash (page 35)
Continuous shutter (CS) speed (High-speed CS, Flash CS modes)
Date/Time (page 43)
9
Flash continuous shutter (CS) images (Flash CS mode) (page 50)
* Image quality cannot be changed using the control panel.
• The content of the control panel is different when shooting a movie and when
using some BEST SHOT scenes (Move Out CS, Move In CS, Multi-motion
Image).
3. Use [4] and [6] to change the setting.
4. If you want to configure another setting, repeat steps 2 and 3.
5. After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
28
Selecting the Exposure Mode
Your camera has a variety of different exposure modes. Before shooting an image,
select the exposure mode that suits the type of subject you are shooting.
1. In the REC mode, press [8] .
2. Use [8] and [2] to select the top option in the control panel (Exposure
mode).
3. Use [4] and [6] to select the setting you want and then press [SET].
t
Auto
Use this setting for easy image recording. This is the mode you normally should
b
BEST SHOT
Simply select one of a collection of built-in sample scenes and the camera sets
A A (Aperture Priority) mode
In this mode, you select the aperture and other settings
are adjusted accordingly.
Use [4] and [6] to select the desired aperture value.
• The ISO sensitivity, shutter speed and aperture
value on the monitor screen will turn orange when
you half-press the shutter button if the image is over-
exposed or under-exposed.
can press [SET], select “Focus”, and then use [4]
and [6] to focus manually.
Aperture value
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
29
S S (Shutter Speed Priority) mode
In this mode, you select the shutter speed and other
settings are adjusted accordingly.
Use [4] and [6] to select the desired shutter speed.
• The ISO sensitivity, shutter speed and aperture value
on the monitor screen will turn orange when you half-
press the shutter button if the image is over-exposed
or under-exposed.
can press [SET], select “Focus”, and then use [4]
and [6] to focus manually.
Shutter speed
M M (Manual Exposure) mode
This mode gives you total control over aperture and
shutter speed settings.
Press [SET], select the aperture setting, and then
use [4] and [6] to change it.
1
Press [SET], select the shutter speed setting, and
then use [4] and [6] to change it.
2
can press [SET], select “Focus”, and then use [4]
and [6] to focus manually.
Aperture value
Shutter speed
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
30
IMPORTANT!
• You may not be able to achieve the brightness you want when shooting an image
that is very dark or very bright. If this happens, use the M mode to adjust the
aperture or shutter speed manually.
• Due to the characteristics of the camera’s semiconductor, slow shutter speeds can
cause digital noise in images. The camera performs an automatic noise reduction
process whenever the shutter speed is 1 second or slower. Storage of images shot
at slower shutter speeds takes longer because of the time required for noise
reduction. Do not perform any key operation while the image storage operation is in
progress.
• Due to the characteristics of the imaging element used by the camera, very fast
moving objects in an image may appear distorted.
• Depending on the shutter speed setting and the recording mode you used, the
brightness of what appears on the monitor screen when you record the image may
be different from the brightness of the recorded image.
turn on Camera AS, if you like.
• When recording with some modes, light source flicker can cause horizontal bands
to appear in the image.
Changing the Image Size (Size)
. Pixels
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size)
through a print service, attaching an image to
e-mail, when viewing the image on a
computer, etc.
Pixel
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
31
. About image sizes
The size of an image indicates how many pixels it contains, and is expressed as
x
horizontal pixels vertical pixels.
x
8M (3264 2448) size image =
3264*
Approximately 8 million pixels
x
VGA (640 480) size image =
640*
Approximately 300,000 pixels
* Unit: pixels
Image Size Selection Tips
Note that larger images have more pixels, so they take up more memory space.
More detail, but takes up more memory. Best
when you plan to print large-size prints (such
as A3 size).
Large Number
of Pixels
Small Number Less detail, but takes up less memory. Best
of Pixels
when you want to send images by e-mail, etc.
• For information about image size, image quality, and number of images that can be
stored, see page 168.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
32
. To select the image size
1. In the REC mode, press [8] .
2. Use [8] and [2] to select the second control panel option from the top
(Image Size).
3. Use [4] and [6] to select an image size and then press [SET].
Suggested
Image Size
Print Size and Description
(Pixels)
Application
Saves the image as both normal JPEG data and
x
RAW image data. A 9M size image (3456 2592
pixels) is stored for the JPEG data. RAW image
data is unprocessed data output by the image
sensor and is saved in DNG (digital negative)
RAW+JPEG
(Select when
you want to
format. Though the image of such data is virtually
undeteriorated, it cannot be viewed on the
camera’s monitor screen or printed. After
RAW+
process image transferring RAW image data to your computer,
data yourself.) you can use software that supports the general-
purpose DNG format to process the image and
convert it to image data that suits your particular
needs. Since both RAW image data and JPEG
data are saved by the camera, you can view the
JPEG version on the camera’s monitor screen.
9M
A3 Print
x
(3456 2592)
3:2
Good detail for better clarity even for images
A3 Print
x
(3456 2304)
16:9
(3456 1944)
HDTV
x
8M
A3 Print
x
(3264 2448)
7M
A3 Print
A3 Print
Good detail
x
(3072 2304)
5M
x
(2560 1920)
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
33
B
Suggested
Print Size and Description
Application
Image Size
(Pixels)
2M
Best when preserving memory capacity is
relatively more important than image quality.
x
3.5" 5" Print
x
(1600 1200)
Image files are smaller, which is better when
attaching images to e-mail. However, images are
relatively coarser.
VGA
(640 480)
E Mail
x
• The initial factory default image size setting is 9M (9 million pixels).
x
• Selecting 3:2 (3456 2304 pixels) records images with an aspect ratio of 3:2, which
matches the standard aspect ratio of print paper.
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an
aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of
television screens of the past. Your camera can record images that are compatible
with the aspect ratio an HDTV screen.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
• You can shoot directly to RAW image data only while the t (Single Shot) is
selected with the Mode dial and “RAW+” is selected as the image size.
• Available image sizes are limited for some functions as noted below.
RAW+, 9M, These options cannot be selected when using High-speed CS,
3:2, 16:9
Flash CS, and some* BEST SHOT scenes.
This option cannot be selected when using some* BEST SHOT
scenes, and High-speed CS while the High-speed CS fps setting is
40 fps.
8M
This option cannot be selected when using Single Shot or Flash
CS, and High-speed CS while the High-speed CS fps setting is
30 fps or less.
7M
* Applicable BEST SHOT scenes: “Move In CS”, “Move Out CS”, “Digital
Panning”, “High Speed Anti Shake”, “High Speed Night Scene”, “Multi-motion
Image”
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
34
Using Flash (Flash)
1. Press ð (Flash up) to open the
Flash
flash unit.
• The flash will not fire if the flash unit
is not open.
2. In the REC mode, press [2] (
)
once.
[2] (
)
ð (Flash up)
3. Use [4] and [6] to select the flash setting you want and then press
[SET].
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
>
?
Auto Flash
Flash Off
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
<
Flash On
¥
Reduction
Red Eye
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
4. Press the shutter button to shoot.
Back lamp
Flashes red while the flash is charging to indicate that image
recording is disabled.
N
< indicates the flash will fire.
• Note that the flash unit does not close automatically. After
you are finished using it, you need to close it by hand.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
35
IMPORTANT!
• The camera will not release the shutter unless the flash unit is raised when any one
of the following conditions exists. Be sure to raise the flash unit whenever shooting
with flash is required.
– When shooting with Flash CS, which requires the flash to fire
– When “Flash On” is selected for the flash mode
– When “Auto Flash” or “Red-Eye Reduction” is selected for the flash mode and
the camera judges that flash is required
NOTE
• Take care to ensure nothing is close to or in contact with the flash unit when it fires.
Also make sure that the flash unit and the area around it is not dirty. Objects, dust,
or dirt near the flash unit can be burned when the flash fires.
• Take care so your fingers and the strap do not block the flash.
• The desired effect may not be obtained when the subject is too far away or too
close.
• Flash charging time depends on operating conditions (battery condition, ambient
temperature, etc.) With new batteries it takes about 5 seconds.
• Flash charging time and operation are affected by the remaining battery capacity.
The flash will take longer than normal to charge if it is being used when the battery
level indicator is showing
or
while “Alkaline” is selected for the “Battery
indicates that the flash is disabled. Replace batteries as soon as possible.
• Shooting with flash turned off when lighting is dim results in a slow shutter speed,
which can cause image blur due to camera movement. Under such conditions,
secure the camera with a tripod, etc.
• With red eye reduction, the flash is fired automatically in accordance with
exposure. It does not fire in areas where lighting is bright.
• The presence of outdoor sunlight, fluorescent lighting, or some other light source
can cause abnormal image colors.
• Select “Flash Off” for the flash setting when shooting in areas where flash
photography is prohibited.
• Approximate Flash Range (ISO Sensitivity: AUTO / Recording mode: Single Shot)
Wide Angle: 0.4 m to 7.0 m (1.3' to 23.0')
Telephoto: 1.3 m to 4.4 m (4.3' to 14.4')
* The above values depend on the optical zoom setting.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
B
36
Red-eye Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. When red-eye reduction is selected as the flash
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the
image to close, which reduces the chance of red eye.
Note the following important points when using red-eye reduction.
• Red-eye reduction does not work unless the people in the image are looking
directly at the camera (flash).
• Red-eye reduction may not work very well if the subjects are located far away from
the camera.
Other Useful Flash Features
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
37
Specifying ISO Sensitivity (ISO)
ISO sensitivity is a measure of sensitivity to light.
1. In the REC mode, press [8] .
2. Use [8] and [2] to select the third control panel option from the top
(ISO Sensitivity).
3. Use [4] and [6] to select the setting you want and then press [SET].
AUTO
Adjusts sensitivity automatically according to conditions
Lower
sensitivity
Slow shutter speed
Less noise
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
Fast shutter speed (Set
for shooting in dimly lit
areas.)
Some coarseness
(increased digital
noise)
Higher
sensitivity
• The current ISO sensitivity setting is used when shooting a High-speed Movie
in the M (manual exposure) mode. For all other types of movies, “AUTO” is
used as the ISO sensitivity setting.
“AUTO”.
• An ISO setting of ISO 400 or greater is not supported when the “Image Size”
setting is “RAW+”. If the ISO setting is “ISO 400” or greater when you change
the “Image Size” setting to “RAW+”, an ISO setting of ISO 200 will be used for
recording.
Adjusting White Balance (White Balance)
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1. In the REC mode, press [8] .
2. Use [8] and [2] to select the fourth control panel option from the top
(White Balance).
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
38
3. Use [4] and [6] to select the shooting condition you want and then
press [SET].
‡
¤
Auto WB
Daylight
Configures the camera to adjust white balance automatically
For shooting outdoors on a clear day
For shooting outdoors on an overcast rainy day, in the
shade, etc.
'
“
Overcast
Shade
For shooting on a clear day in the shade of trees or buildings
For shooting under white or day white fluorescent lighting
†
Day White
Fluorescent
–
Daylight
Fluorescent
For shooting under daylight fluorescent lighting
For shooting under light bulb lighting
«
·
Tungsten
For configuring the camera manually to suit a particular light
source.
Select “· Manual WB”.
Blank white paper
1
2
Under the lighting conditions you plan
to use when shooting, point the camera
at a blank white piece of paper so it fills
the entire monitor screen and then
press the shutter button.
Manual WB
Press [SET].
3
The white balance setting is retained even if you turn off the
camera.
• When “‡ Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.)
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
39
Correcting Image Brightness (EV Shift)
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0EV to +2.0EV
• Unit: 1/3EV
1. In the REC mode, press [8] .
2. Use [8] and [2] to select the fifth control panel option from the top (EV
Shift).
3. Use [4] and [6] to adjust the exposure compensation value.
[6]: Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
[4]: Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
To cancel exposure compensation, change
the EV value to 0.0.
Exposure compensation value
4. Press [SET].
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it.
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
40
Specifying the Metering Mode (Metering)
The metering mode determines what part of the subject is metered for exposure.
1. In the REC mode, press [8] .
2. Use [8] and [2] to select the sixth control panel option from the top
(Metering).
3. Use [4] and [6] to select the setting you want and then press [SET].
Multi-pattern metering divides the image into sections and
measures the light in each section for a balanced exposure reading.
This type of metering provides error-free exposure settings for a
wide range of shooting conditions.
B
Multi
Center weighted metering concentrates on the center of the focus
area to measure light. This type of metering is best when you want
some level of control over contrast.
N
Weighted
Center
Spot metering takes readings at a very small area. Use this
metering method when you want exposure to be set according to
the brightness of a particular subject, without being affected by
surrounding conditions.
˜
Spot
Specifying the Auto Focus Area (AF Area)
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
U
• When recording movies, the AF metering area is always “
Spot”.
1. In the REC mode, press [8] .
2. Use [8] and [2] to select the third control panel option from the
bottom (AF Area).
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
41
3. Use [4] and [6] to select the setting you want and then press [SET].
This mode takes readings of a small area in the center of the image.
U
Spot
You can move the focus frame by using [8], [2], [4], and [6] to move
the focus point and then pressing [SET]. To change the focus point
position, select “— Free” again and then use [8], [2], [4] and [6] to
select the position you want.
—
O
Free
When you half-press the shutter button while this setting is selected, the
Tracking focus frame will follow the movement of the subject.
U
O
Spot” or “
“
Tracking”
Focus frame
“— Free”
*
[SET]
Focus point
Focus frame
O
• “
Tracking” cannot be used in combination with the following features.
Prerecord (Still image), YouTube, Prerecord (Movie), some BEST SHOT
scenes (Move Out CS, Move In CS, Multi-motion Image)
• “— Free” cannot be selected for the AF area while Face Detection is enabled.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
42
Changing the Control Panel Date/Time Style
1. In the REC mode, press [8] .
2. Use [8] and [2] to select the bottom control panel option (Date/Time).
You can use [4] and [6] to select date or time display.
NOTE
Day/Month.
• The time is displayed using 24-hour format.
Shooting with Zoom
Your camera provides you with 20X optical zoom (that changes the lens focal
distance), which can be used in combination with digital zoom (that digitally
processes the center portion of the image to enlarge it) for total zoom capabilities of
1. In the REC mode, slide the zoom controller to zoom.
Zoom controller
z Telephoto w Wide Angle
z (Telephoto) : Enlarges the subject and narrows the range
w (Wide Angle): Reduces the size of the subject and broadens the range
• Sliding the zoom controller as far as it will go in either direction will zoom at
high speed.
2. Press the shutter button to shoot the image.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
43
NOTE
• The higher the digital zoom factor, the coarser the recorded image. Note that the
camera also has a function that lets you record using digital zoom without image
deterioration (page 44).
• Use of a tripod is recommended to protect against image blur due to camera
movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
• Digital zoom is disabled while “RAW+” is selected for the “Image Size” setting
• Both optical zoom and digital zoom are disabled during High-speed Movie
recording.
• Both optical zoom and digital zoom are disabled when “Á Super Macro” is
selected as the focus mode.
Optical Zoom/Digital Zoom Switch Point
If you hold the zoom controller towards z (Telephoto), the zoom operation will stop
when the optical zoom factor reaches its maximum. Momentarily releasing the zoom
controller and then holding it again towards z (Telephoto) will switch to digital
zoom, which you can use to set an even higher zoom factor.
• If you do want to use digital zoom, change the “Digital Zoom” setting to “On” (page
82).
• During zoom, a zoom bar on the monitor screen shows the current zoom setting.
Focal distance
(Converted to 35mm film format.)
* The displayed focal distance (angle of view) and the actual angle of view may be
different when using continuous shutter (except in the Single Shot Mode), when
shooting a movie, and when using some BEST SHOT scenes.
Image deterioration indicator
Focusing range
(Displayed for Auto Focus, Macro Focus, and Manual
Focus.)
* Products marketed in some geographic areas display
inches and feet.
Zoom bar
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
B
44
Undeteriorated digital zoom
Undeteriorated image quality range Deteriorated image quality range
1X
20X to 108X
80X to 318.8X
Optical/digital zoom switch point
* 20X optical zoom point
Zoom pointer (Indicates current zoom.)
Deterioration point
• The deterioration point depends on
the current image size setting (page
31). The smaller the image size
setting, the higher the zoom factor
you can use before reaching the
image deterioration point.
Image
Size
Maximum
Zoom Factor
Deterioration
Point
9M
3:2
80X
80X
20X
20X
16:9
8M
80X
20X
• Though digital zoom generally
causes a deterioration of image
quality, some digital zoom without
image deterioration is possible with
image sizes of “8M” and smaller. The
range in which you can use digital
zoom without image deterioration is
indicated on the display. The
84.6X
90X
21.2X
22.4X
27X
7M
5M
108X
172.4X
318.8X
2M
43.2X
108X
VGA
deterioration point depends on the
image size.
• The maximum zoom factor using
combination when “HD/STD” is selected as the movie mode is 318.8X.
• When “HD/STD” is selected as the movie mode, minimal deterioration up to a
zoom factor of 108X is possible only for STD shooting.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
45
Selecting a Focus Mode (Focus)
@
Each press of
mode settings.
(Focus) will cycle through the available focus
• Whenever you change to another focus mode, the previous
focus point is saved, so you can use Auto Focus for initial
focus, and then switch to Manual Focus to make fine
adjustments.
@
(Focus)
Focus Mode
Approximate Focus Range*
Snapshot Movies
Type of
Shot
Settings
Snapshot Movies
Q Auto
Focus
General
recording
Automatic
Automatic
Automatic
40 cm to 9 (infinity) (1.3' to 9)
12 cm to 50 cm (4.7" to 19.7")
1 cm to 12 cm (0.4" to 4.7")
´ Macro
Focus
Close ups
Á Super
Macro
Extreme
close ups
12 cm to 9 (infinity) (4.7" to 9)
1 cm to 9 (infinity) (0.4" to 9)
(when the zoom focal distance is
equivalent to 57 mm in 35 mm
film format)
When you
W Manual want to
Manual
Focus
focus
manually
• Range is affected by optical zoom.
* The focus range is the distance from the lens surface.
To focus with manual focus
1. On the monitor screen, compose the image so
the subject you want to focus on is within the
yellow boundary.
2. Watching the image on the monitor screen use
[4] and [6] to adjust focus.
• At this time the image that is within the boundary will
enlarge and fill the monitor screen, which aids in
focusing. If you do not perform any operation for two
seconds while the enlarged image is displayed, the
screen in step 1 will re-appear.
Yellow boundary
• When the exposure mode setting is A, S, or M, or when “30-210 fps” is
selected for High-speed Movie recording, you need to press [SET] and then
selected “FOCUS” before performing step 2 of the above procedure.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
B
46
NOTE
• When proper focusing is not possible because the subject is closer than the Auto
Focus range, the camera will switch to the Macro Focus range (which does not
include the Super Macro range) automatically (Auto Macro).
• When proper focusing is not possible because the subject is further than the macro
range (which does not include the Super Macro range), the camera will switch to
the Auto Focus range automatically (Auto Macro).
• Auto Macro can be used when recording snapshots only.
• Use of the flash together with Macro Focus can cause the light of the flash to
become blocked, which may result in unwanted lens shadows in your image.
• Whenever you perform an optical zoom operation while shooting with Auto Focus,
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell
you the focus range, as shown below.
Example: oo cm to 9
* oo is the actual focusing range value.
* Products marketed in some geographic areas display inches and feet.
• Always be sure to select Auto Focus (AF) as the focus mode whenever using face
detection (page 80).
• The following functions are disabled when shooting with Super Macro.
– Zoom (both optical and digital)
– Auto Macro
– Flash
– Flash CS
• The large zoom factor capabilities of this camera can result in images being out of
focus if the camera is moved while shooting with fixed focus. Whenever possible,
mount the camera on a tripod or secure it using some other means before
focusing. If the image is out of focus, either refocus or change to manual focus
(MF) to adjust focus as required.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
B
47
Using Focus Lock
“Focus lock” is a technique you can use when you want to
compose an image in which the subject you want to focus
on is not within the focus frame in the center of the screen.
• To use focus lock, select “U Spot” or “O Tracking” for
Subject to be focused on
1. Align the monitor screen’s focus frame with
the subject you want to focus on and then half-
press the shutter button.
Focus frame
2. Keeping the shutter button half-pressed (which
maintains the focus setting), move the camera
to compose the image.
• When “O Tracking” is selected as the Auto Focus
area, the focus frame will move automatically and
follow the subject.
3. When you are ready to shoot the image, press the shutter button the
rest of the way down.
NOTE
• Focus lock also locks exposure (AE).
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
48
Locking the Auto Exposure and Auto Focus Setting
Pressing [AEL] temporarily locks the current exposure and/or
focus settings. Press [AEL] again to unlock the settings.
• Pressing [AEL] while the shutter button is half-pressed will
lock the current exposure or focus setting.
[AEL]
Specifying the [AEL] button Operation
Use the following procedure to specify the operation that the [AEL] button performs.
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select “REC”.
3. Use [8] and [2] to select “AE/AF Lock” and then press [6].
4. Use [8] and [2] to change the setting, and then press [SET] to apply it.
AE Lock
Exposure lock
AF Lock
Focus lock
AE/AF Lock
Exposure and focus lock
NOTE
O
• AE Lock and AF Lock are not supported while “
Area” setting.
Tracking” is selected for the “AF
• Performing an EV shift operation while AE Lock is in effect will cause Auto
Exposure to be unlocked.
• Performing a zoom operation while AF Lock and AE Lock are in effect will cause
both of them to become unlocked.
• AE Lock and AF Lock are not supported during movie recording.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
49
Using Continuous Shutter
Using Flash Continuous Shutter
This mode will record consecutive images while firing the
flash.
• You can select a CS speed of 1 image, 3 images, or 5
images per second.
• In this mode, you can specify consecutive recording of
three to 10 images. Recording will stop if you release
the shutter button.
Flash
1. Set the mode dial to ª (Flash CS).
2. Press ð (Flash up) to open the flash unit.
3. Use [8] and [2] to select the second control panel option from the
bottom (Flash CS fps).
4. Use [4] and [6] to select the continuous
Flash Unit CS Speeds
shutter (CS) speed you want and then press
[SET].
5. Use [8] and [2] to select the bottom item
(Flash CS Images).
6. Use [4] and [6] to select the number of flash
continuous shutter (CS) images you want to
shoot and then press [SET].
You can select any one of the following values: 3, 5, 7, or 10.
7. Press the shutter button to shoot.
8. If you keep the shutter button depressed, the camera will shoot the
number of images you specified. Recording will stop if you release the
shutter button before the specified number of images is reached.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
50
NOTE
• The back lamp flashes red while the flash is charging. You will not be able to
perform further Flash CS shooting until charging is complete, which is indicated
when the back lamp stops flashing and goes out.
• When shooting with Flash CS, there may be times when a message appears telling
you to wait, because you have reached the limit of the flash. This is to protect the
flash from damage. You will be able to resume using flash after the message
disappears.
Using High-speed CS and Prerecord CS
In this mode, half-pressing the shutter button starts continual pre-recording of images
to a temporary buffer. Then when you press the shutter button the rest of the way
down, the camera stores what is currently in the buffer and starts continuous shutter
recording of new images. Recording continues until you release the shutter button or
until a total of up to 40 images (buffer images plus new images) are recorded
(Prerecord (Still image)). You can configure this mode to specify how many of the 40
images are recorded in the buffer and how many are recorded after you fully press
the shutter button. You can use this mode when you want to make sure you do not
miss fast-moving action.
Shutter button release
Shutter button full-press
Shutter button half-press
Recorded images (up to 40 images)
Continuous recording of images until shutter
button released*
Pre-recorded images
* You can record up to 40 images (pre-recorded buffer images plus real-time images) for
each Prerecord (Still Image) operation.
• You can specify anywhere from one second up to 40 seconds as the continuous
shutter shooting time, which is the amount of time of the pre-record buffer plus the
amount of time that continuous shutter recording is performed after the shutter
button is pressed all the way. The maximum shooting time depends on the
selected CS speed. You can select a CS speed in the range of 1 to 40 fps.
40 images per second (40 fps): You can shoot up to 40 images in one second.
1 image per second (1 fps)
: You can shoot up to 40 images over 40 seconds.
• You can configure the mode so up to 39 images are pre-recorded to the buffer until
you fully press the shutter button.
• The minimum interval for images pre-recorded in the buffer is 0.5 seconds and the
minimum number of pre-recorded images is one.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
51
×
1. Set the mode dial to
(High-speed CS).
2. Use [8] and [2] to select the second control panel option from the
bottom (High-speed CS fps).
3. Use [4] and [6] to select the continuous
CS speed
shutter (CS) speed you want and then press
[SET].
4. Use [8] and [2] to select the bottom control
panel option (Prerecord (Still image) Time).
5. Use [4] and [6] to specify how many of the 40 images and for how
long images should be pre-recorded in the buffer.
• Prerecord (Still image) shooting is not performed when the number of buffer
images and the recording time are both zero.
Number of pre-record images and pre-record time
Shutter button full-press
Number of remaining images and remaining recording
time after the shutter button full-press
6. Press [SET].
Number of recordable CS images (If you are
not performing Prerecord CS, the allowable
continuous shutter time also is displayed.)
• The approximate
number of recordable
CS images will appear
on the monitor screen.
Remaining snapshot memory capacity
7. Half-press the shutter button.
This will cause the camera to start pre-recording images.
• The camera will not emit a shutter sound when you half-press the shutter
button while Prerecord (Still image) is selected.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
B
52
8. Press the shutter button the rest of the way down.
This will record the images in the pre-record buffer and start recording new
images in real-time. Images continue to be shot as long as you keep the shutter
button depressed.
9. Image recording will stop when you release the shutter button or after
a total of 40 images are recorded.
Specifying the Method for Saving Continuous Shutter Images
You can specify the method to use for saving images recorded with the following
continuous shutter (CS) modes.
Flash CS, High-speed CS
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select “REC”.
3. Use [8] and [2] to select “Save CS Images”, and then press [6].
4. Use [8] and [2] to change the setting.
Normal (Batch)
All images that were shot are saved after the continuous shutter operation is
finished.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
53
Select & Save
After continuous shutter shooting is finished, the shot images are played back
at slow speed so you can select the images you want to save.
• When shooting with Prerecord (Still Image), the first image saved when you
press the shutter all the way is indicated by an “S” mark so you can tell where
the continuous shutter operation started.
While the shot images are playing back and an image
appears that you want to save, press the shutter
button. Each image that you select by pressing the
shutter button will have a mark appended to it.
After selecting all of the images you want to save,
press [8].
Mark
1
2
Buttons Used for Image Selection
During playback, changes the playback direction and playback
speed.
[4] [6]
While playback is paused, scrolls forward or back.
[SET]
Toggles between pause and play.
Shutter
button
Press all the way down to select an image for saving.
Saves the selected images and exits the image select
operation.
[8]
Use [8] and [2] to select the save method you want and then press [SET].
Save Selected: Saves selected images.
3
Save All
: Saves all the images.
Cancel Save : Does not save any of the images.
Always Ask
After continuous shutter shooting is finished, a prompt appears allowing you to
select Normal (Batch) or Select & Save.
Select the save method you want to use and then press [SET].
Save Selected: Saves selected images.
Save All
: Saves all the images.
Cancel Save : Does not save any of the images.
5. Press [SET] to apply the setting.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
54
Continuous Shutter Precautions
• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for
successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• In the High-speed CS mode, the flash setting automatically becomes ? (flash off).
• Zoom is disabled during continuous shutter operations.
• RAW+, 9M, 3:2, or 16:9 cannot be selected as the image size while High-speed CS
or Flash CS is being used. If you enter the High-speed CS or Flash CS mode while
one of these image sizes is selected, the camera will record 8M size images.
• If 8M is selected as the image size in the High-speed CS mode, selecting a CS
x
speed of 40 fps will cause 7M (3072 2304) size images to be recorded.
• The maximum number of images that can be recorded during each High-speed CS
or Flash CS session is limited, regardless of how much memory card storage
capacity is available.
High-speed CS
Up to 40 images
Flash CS with flash
Up to 3 to 10 images
The number of images will be restricted even further or shooting may be impossible
when remaining memory card capacity is less than the allowable number of images
for a particular CS mode.
• The Triple Self-time cannot be used in the High-speed CS and Flash CS.
• The Self-timer cannot be used in the Prerecord (Still image) mode.
• When the flash is fired for Flash CS, the greater the number of images setting, the
smaller the flash range (shooting range).
×
• With some BEST SHOT scenes, the current mode dial setting (
(High-speed
CS), ª (Flash CS)) is ignored.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
55
Recording Movies
To record a movie
The following procedure explains how to record a
standard (STD) movie.
Mode dial
1. Set the mode dial to ³ (HD/STD).
2. Press [8] .
Shutter button
3. Use [8] and [2] to select the second
control panel option from the top (HD/STD switching).
4. Use [4] and [6] to select “STD” (Standard), and then press [SET].
x
• Recording is performed with an aspect ratio of 4:3, an image size of 640 480
pixels, and a frame rate of 30 frames per second (STD Movie). Image size
setting cannot be changed.
5. Press the shutter button.
Remaining recording time
This will start recording and display Y on the
monitor screen.
Movie recording includes monaural audio.
6. Press the shutter button again to stop
recording.
• Each movie can be up to 10 minutes long. Movie
recording stops automatically after 10 minutes of
recording. Movie recording also will stop
Recording time
automatically if memory becomes full before you
stop movie recording by pressing the shutter button.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during
to subject movement.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
B
56
Audio
Your camera has a built-in microphone that can be used to record audio (monaural)
during movie recording.
. Recording Precautions
The camera also records audio. Note the following points
when shooting a movie.
Microphone
– Take care that the microphone is not blocked by your
fingers, etc.
– Good recording results are not possible when the
camera is too far away from what you are trying to
record.
– Operating camera buttons while shooting can cause button noise to be picked
up in the audio.
• When “HD/STD” is selected as the movie mode, turning optical zoom on or off also
turns audio recording on or off. Audio recording is turned off while optical zoom is
turned on, and turned on while optical zoom is turned off. The optical zoom on/off
operation is performed using the control panel. Note that lens operation noise may
be picked up in audio recordings.
• Audio recording cannot be performed while “HS” is selected as the movie mode.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
57
NOTE
• Continuous Auto Focus is performed during movie recording when optical zoom is
turned on while “HD/STD” is selected as the movie mode, regardless of the current
Continuous AF setting. If optical zoom is turned off, continuous Auto Focus is not
performed during movie recording, regardless of the current Continuous AF setting.
• When “HD/STD” is selected as the movie mode and optical zoom is turned off, you
can readjust focus while movie recording is in progress by half pressing the shutter
button. Note, however, that noise produced by the lens operation will be picked up
in the audio recording.
• Focus is fixed during movie recording when “HS” is selected as the movie mode.
• The YouTube mode is disabled automatically during HD movie recording when
“HD/STD” is selected as the movie mode.
• The [BS] button and BEST SHOT feature are disabled during movie recording.
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
• Use of certain types of memory cards slows down data transfer and increases the
time it takes to record movie data, which can result in movie frames being dropped.
0
The “ REC” indicator on the monitor screen turns yellow to indicate that frames
are being dropped. In order to avoid problems such as these, use of an Ultra High-
Speed Type SD memory card is recommended. Note, however that CASIO makes
no guarantees about the operation of any Ultra High-Speed Type SD memory card
used with this camera.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.
• Face Detection is disabled during movie recording.
• The exposure mode changes to t (Auto) automatically whenever you shoot a
• The aperture, shutter speed, and ISO sensitivity settings (M Mode only) configured
with the snapshot A Mode, S Mode, or M Mode are used when shooting a movie
is limited in accordance with the frame rate specified for the high-speed movie.
• The [AEL] button is disabled (AE lock and AF lock do not function) while “HS” or
“HD/STD” is selected as the movie mode.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
B
58
Recording a High-definition Movie
This camera supports recording of high-definition (HD) movies. The aspect ratio of an
x
HD movie is 16:9, the image size is 1280 720 pixels, and the frame rate is 30 fps.
Image quality and image size settings cannot be changed.
1. Set the mode dial to ³ (HD/STD).
2. Press [8] .
3. Use [8] and [2] to select the second control panel option from the top
(HD/STD switching).
4. Use [4] and [6] to select “HD”, and then press [SET].
5. Record the movie the same way as you would a normal movie (page
56).
Press the shutter button to start and stop recording.
NOTE
• When recording certain types of movies, the image that appears on the monitor
screen may be smaller than normal. When recording an HD movie, there are black
bands along the top and bottom of the screen.
Recording a High-speed Movie
This camera supports recording of high speed movies at a maximum speed of
1000 fps. The aspect ratio of movies recorded with this mode depends on the frame
rate (recording speed).
• Audio is not recorded in this mode.
1. Set the mode dial to © (HS).
2. Press [8] .
3. Use [8] and [2] to select the second control panel option from the top
(HS Speed).
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
B
59
4. Use [4] and [6] to select the
frame rate (recording speed) of
the movie you want and then
press [SET].
Image Size
(Pixels)
Frame Rate
x
480 360
210 fps
420 fps
1000 fps
30-210 fps
x
x
224 168
A fast frame rate (such as 1000 fps)
will result in a smaller image size.
x
224 56*
x
480 360
5. Record the movie the same way
as you would a normal movie
* 224 80 in the YouTube mode.
Press the shutter button to start and
stop recording.
• With the “30-210 fps” high-speed
movie, the frame rate is always fixed
at 30 fps when you first begin
recording. You can switch between
30 fps and 210 fps only while
recording is in progress. Use [4]
and [6] or press [SET] to switch speeds.
NOTE
• When recording certain types of movies, the image that appears on the monitor
screen may be smaller than normal. When recording a high-speed movie, there are
black bands along the top, bottom, left, and right of the screen.
• When recording a high-speed movie, light source flicker can cause horizontal
bands to appear in the image. This does not indicate malfunction of the camera.
• During High-speed Movie recording, Auto Focus and exposure remain fixed at the
levels they were when you initially started recording. Zoom and monitor screen
content switching are all disabled.
• To focus the image, half-press the shutter button for Auto Focus or focus manually
before starting the High-speed Movie recording operation.
• When recording a high-speed movie, you can record movies with the A (Aperture
Priority) mode, S (Shutter Speed Priority) mode, or M (Manual Exposure) mode
the High-speed Movie frame rate. The A, S, and M mode settings are not
supported when recording with “Prerecord (Movie)”.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
B
60
Using Prerecord Movie (Prerecord (Movie))
With this feature, the camera pre-records up to five seconds of whatever is happening
in front of the lens in a buffer that is continually updated. Pressing [0] saves the
prerecorded action (buffer contents) followed by real-time recording. Real-time
recording continues until you stop it.
• When using Prerecord Movie in combination with High-speed Movie, the buffer will
store two seconds of pre-recording instead of the usual five.
. To set up the camera to shoot with Prerecord Movie
1. In the REC mode, set the mode dial to ³ (HD/STD) or © (HS).
2. Press [8].
3. Use [8] and [2] to select the third control panel option from the
bottom (Prerecord (Movie)).
4. Use [4] and [6] to select “Prerecord (Movie): On” and then press
[SET].
To turn off Prerecord (Movie), select “Prerecord (Movie): Off”.
. To shoot a Prerecord Movie
1. With the camera pointed at the subject, half-press and hold the shutter
button.
Movie images will be pre-recorded to the five-second buffer only while the shutter
button is maintained in the half-press position.
• When using Prerecord Movie in combination with High-speed Movie, the buffer
will store two seconds of pre-recording instead of the usual five.
2. When you are ready to start real-time recording, press the shutter
button the rest of the way down.
3. Press the shutter button again to stop recording.
• When shooting with the High-speed Movie “30-210 fps” setting, you cannot
change the speed (fps) setting when recording while the shutter button is half-
pressed (while recording to the buffer). You can change the speed (fps) setting
after you press the shutter button all the way down to start real-time recording.
NOTE
• Focus is locked while the shutter button is half-pressed when Prerecord (Movie) is
turned on and optical zoom is turned off, or when Prerecord (Movie) is turned off.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Recording a Movie for YouTube (YouTube)
The YouTube mode records movies in a format that is optimal for uploading to the
YouTube movie site, which is operated by YouTube, LLC.
³
1. Set the mode dial to
2. Press [8].
(HD/STD) or © (HS).
3. Use [8] and [2] to select the second control panel option from the
bottom (YouTube).
4. Use [4] and [6] to select “YouTube: On” and then press [SET].
5. Record the movie.
The movie file will be stored in a camera folder named “100YOUTB”.
• Installing YouTube Uploader for CASIO from the CD-ROM that comes with
your camera simplifies uploading of movie files you recorded with the YouTube
Mode to YouTube (page 124).
NOTE
• Movies recorded with the YouTube mode are stored in a special folder to make
with the current movie size, recording speed and quality settings.
• To focus before starting to record a movie with the “YouTube” mode, use manual
focus. After focusing, start recording.
• The YouTube mode is always turned off (which means you cannot shoot a
YouTube optimized movie) during HD movie recording while “HD/STD” is selected
as the movie mode.
• When “HS” is selected as the movie mode and “1000 fps” is selected as the
recording speed, black bands will be added along to the top and bottom of
recorded images to adjust them to the ideal size for YouTube, which is
x
224 80 pixels.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Turning Optical Zoom On or Off (Optical Zoom)
“HD/STD” is selected as the movie mode.
³
1. Set the mode dial to
2. Press [8].
(HD/STD).
3. Use [8] and [2] to select the fourth control panel option from the
bottom (Optical Zoom).
4. Use [4] and [6] to select the setting you want and then press [SET].
Optical Zoom:
Enables optical zoom and disables audio recording.
On/Record: Off Continuous AF is always performed during recording.
Disables optical zoom and enables audio recording.
Continuous AF is never performed during recording. You
Optical Zoom:
can readjust focus while recording is in progress by half
Off/Record: On
pressing the shutter button, but doing so will cause noise
produced by the lens operation to be picked up in the audio.
NOTE
• Optical zoom operation while recording is disabled when “HS” is selected as the
movie mode.
• Regardless of the above setting, optical zoom operation prior to recording is
supported when either “HS” or “HD/STD” is selected as the movie mode.
• Optical zoom is disabled when “Á Super Macro” is selected as the focus mode.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Using BEST SHOT
What is BEST SHOT?
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
Some Sample Scenes
High Speed
Night Scene
Portrait
Scenery
Night Scene Portrait
To shoot with BEST SHOT
1. Set the mode dial to t (Single Shot),
× (High-speed CS), or ª (Flash CS).
2. Press [BS].
[BS]
This will display a menu of BEST SHOT scenes.
3. Use [8], [2], [4], and [6] to move the
boundary to the scene you want to select.
• The scene menu has multiple pages. Use [8] and
[2] to scroll between menu pages.
Currently selected scene
(with boundary)
• You can access information about the currently
4. Press [SET] to configure the camera with the
settings for the currently selected scene.
This returns to the REC mode.
Scene name
• The settings of the scene you selected remain in
effect until you select a different scene.
• To select a different BEST SHOT scene, repeat
the above procedure from step 1.
Scene number
5. Press the shutter button to start shooting.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
64
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then slide the zoom controller in
either direction.
• To return to the scene menu, slide the zoom controller
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently
selected scene, press [SET]. To return to the scene information screen for the
currently selected BEST SHOT scene, press [BS].
. BEST SHOT Precautions
• BEST SHOT scene images were not shot using this camera.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
• The mode dial’s t (Single Shot), × (High-speed CS), and ª (Flash CS)
settings are ignored when some BEST SHOT scenes are selected.
³
• The [BS] button is ignored while the mode dial setting is © (HS) or
(HD/STD).
• RAW+, 9M, 3:2, 16:9, and 8M cannot be selected for the image size while “High
Speed Anti Shake”, “Digital Panning”, “High Speed Night Scene”, “Move Out CS”,
“Move In CS”, or “Multi-motion Image” BEST SHOT scene is selected. An image
size setting of 7M is used if any one of the above image sizes is already selected
before selecting one of the above BEST SHOT scenes.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
65
Creating Your Own BEST SHOT Setups
You can save up to 999 camera setups as user BEST SHOT scenes for instant recall
whenever you need them.
1. On the BEST SHOT scene menu, select the scene named BEST SHOT
(Register User Scene).
2. Use [4] and [6] to select the snapshot whose setup you want to save.
3. Use [8] and [2] to select “Save”, and then press [SET].
Your BEST SHOT scene will be assigned the name “Recall User Scene”, along
with a scene number.
NOTE
• You can create BEST SHOT setup for snapshots only. You cannot create a movie
BEST SHOT setup.
• You can check the settings of the currently selected BEST SHOT scene by
displaying the camera’s setting menus and looking at its settings.
• User snapshot scenes are assigned numbers in the sequence: U1, U2, and so on.
• The following are the settings that are saved for each user snapshot BEST SHOT
scene.
Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Dynamic
Range, Flash Intensity, Flash Assist, Color Filter, Sharpness, Saturation, Contrast
folder (snapshots).
scenes.
• Use the following procedure when you want to delete a user BEST SHOT scene.
want to delete.
1
Press [2] (
), select “Delete”, and then press [SET].
2
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
66
B
Shooting with High Speed Night Scene
(High Speed Night Scene)
With High Speed Night Scene, the camera detects automatically whether it is being
hand-held or on a tripod. When you press the shutter button, the camera will record a
series of image and combine them in a way that minimizes image blur due to low light
conditions. If the camera detects it is on a tripod, it will shoot a single image using a
longer exposure time (instead of shooting and combining multiple images), which
results in an even clearer image.
1. Set the mode dial to t (Single Shot), × (High-speed CS), or ª (Flash
CS).
2. Press [BS].
3. Select “High Speed Night Scene”.
• The camera automatically decides whether it is handheld or mounted on tripod
at the moment you select the “High Speed Night Scene” BEST SHOT scene. It
does not update its decision any time after that, until you select “High Speed
Night Scene” again.
4. When you are ready to shoot, press the shutter button.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears.
NOTE
• The following mode dial settings are ignored when shooting with this BEST SHOT
scene: t (Single Shot), × (High-speed CS), ª (Flash CS).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• Movement while the camera is mounted on a tripod may cause the camera to
erroneously judge it is being hand held.
• The flash is always turned off and the flash setting cannot be changed while High
Speed Night Scene is enabled.
• For handheld shooting under very dark conditions, this BEST SHOT scene may not
be able to produce the exposure level required for a clear image. Use of a tripod
under very dark conditions is recommended.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
67
Shooting with High Speed Anti Shake
(High Speed Anti Shake)
When you press the shutter button while High Speed Anti Shake is enabled, the
camera records multiple images and automatically combines them in a way that
produces a final image with minimal blur. You can shoot with this feature to minimize
the effects of camera movement when shooting with optical anti shake does not
produce the desired results.
1. Set the mode dial to t (Single Shot), × (High-speed CS), or ª (Flash
CS).
2. Press [BS].
3. Select “High Speed Anti Shake”.
4. When you are ready to shoot, press the shutter button.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears.
NOTE
• The following mode dial settings are ignored when shooting with this BEST SHOT
scene: t (Single Shot), × (High-speed CS), ª (Flash CS).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• High Speed Anti Shake will not operate correctly while the camera is mounted on a
tripod.
• High Speed Anti Shake may not operate properly resulting in blurred images if the
camera is moved more than the allowable range or if the subject moves during
shooting.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
68
Shooting with Digital Panning (Digital Panning)
When you point the camera at a moving object and pan as you press the shutter
button, the camera will perform a continuous shutter operation, recording multiple
images. Then it will automatically correct for blurring of the subject only in the
recorded images and combine them into a single image that shows a clear subject on
a blurred background. This feature lets you shoot powerful panning images simply by
following the subject.
1. Set the mode dial to t (Single Shot), × (High-speed CS), or ª (Flash
CS).
2. Press [BS].
3. Select “Digital Panning”.
4. When you are ready to shoot, press the shutter button.
• Lines will appear on the monitor screen, dividing it into nine areas. As you
shoot, move the camera to keep the subject within the middle area as much as
possible.
NOTE
• The following mode dial settings are ignored when shooting with this BEST SHOT
scene: t (Single Shot), × (High-speed CS), ª (Flash CS).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• Under certain lighting conditions, shooting with Digital Panning can result in
overexposure.
Isolating Moving Subjects (Multi-motion image)
Multi-motion image can be used to isolate a moving subject
within a series of multiple images and place them against a
stationary background. Use a tripod or some other means
to make sure that the camera is not moving or shaking
when shooting with Multi-motion image.
Basic Multi-motion image Procedure
1. Set the mode dial to t (Single Shot), × (High-speed CS), or ª (Flash
CS).
2. Press [BS].
3. Select “Multi-motion Image”.
4. Hold down the shutter button to record.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
B
69
5. Release the shutter button.
Continuous Shutter shooting will stop and the resulting composite image will
appear on the monitor screen.
• The above procedure shoots multiple images and combines them
automatically into a final image. Do not move the camera until shooting is
complete.
• You can configure the CS fps and Prerecord CS time settings the same way as
you configure the High-speed CS setting. Note, however, unlike High-speed
CS, the maximum CS fps setting is 30.
• When recording, keep the shutter button depressed long enough to record at
least six consecutive shutter images.
NOTE
• The following mode dial settings are ignored when shooting with this BEST SHOT
scene: t (Single Shot), × (High-speed CS), ª (Flash CS).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• Shooting with “Multi-motion Image” assumes that the subject is moving and
changing positions. Trying to use it to shoot a subject that is moving while
maintaining the same location (such as a golf swing, a baseball swing, etc.) will
cause an error message to appear on the monitor screen and failure of image
recording, or will produce an image in which the shots of the subject are arranged
incorrectly.
• Multi-motion will not operate correctly if you shake or move the camera along with
the movement of the subject.
• If an error message appears on the monitor screen, either secure the camera so it
does not move or shoot against a different type of background.
• Choose a shooting angle so the colors, shapes, and patterns of the moving subject
and the background are as different as possible.
• Avoid a shooting angle where the background is monotone or mono-pattern (such
as a clear blue sky).
• The camera may not be able to compose the final image if the intervals between
movements are so narrow the subject shots overlap. If this happens, increase the
interval by using the control panel to select a slower “High-speed CS fps” setting
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
B
70
Shooting an Image in Accordance with Subject Movement
(Move Out CS/Move In CS)
You can use these features to shoot an image automatically whenever the subject
moves into or moves out of a frame on the monitor screen. You also can configure the
camera to record images of what happened immediately before and after the subject
moves.
Automatically records what happened immediately before and
Move Out CS
Move In CS
after the subject moves outside of a boundary on the monitor
screen.
Automatically records what happened immediately before and
after the subject moves into a boundary on the monitor screen.
. To setup the camera
1. Set the mode dial to t (Single Shot), × (High-speed CS), or ª (Flash
CS).
2. Press [BS].
3. Select “Move Out CS” or “Move In CS”.
4. Press [SET].
5. Configure the boundary location and size
settings.
[8] [2] [4] [6] Moves the boundary.
Zoom controller Resizes the boundary.
6. Press [SET].
Boundary
• If you want to reconfigure the settings, start again
from step 4.
7. Use [8] and [2] to select the third control panel option from the
bottom (Trigger Sense).
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
71
8. Use [4] and [6] to select the subject movement sensitivity, and then
press [SET].
• You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”.
• Move Out CS Setting Guide
High: For a subject that moves out of the boundary quickly
Low : For a subject that moves out of the boundary slowly
• Move In CS Setting Guide
High: For a subject that moves into the boundary quickly or for a small subject
(relative to the boundary)
Low : For a subject that moves into the boundary slowly or for a large subject
(relative to the boundary)
9. Use [8] and [2] to select the second control panel option from the
bottom (High-speed CS fps).
10. Use [4] and [6] to select the CS speed setting
CS speed
you want, and then press [SET].
• You select a value in the range of 1 frame per
second to 40 frames per second for the CS speed.
11. Use [8] and [2] to select the bottom control panel option (Prerecord
(Still image) Time).
12. Use [4] and [6] to specify the pre-record time, which is the amount of
time before and after subject movement for which you want to record
images, and then press [SET].
Number of pre-recorded images and recording time
Auto shutter point
Number of real-time recorded images and
recording time
• The approximate number of recordable
CS images will appear on the monitor
screen.
• The “Number of pre-recorded images and
recording time” cannot be set to zero.
Number of recordable
CS images
Remaining snapshot
memory capacity
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
72
B
. To shoot using Move Out CS
1. Compose the image so the subject is within the boundary on the
monitor screen.
2. Half-press the shutter button.
• The camera will adjust exposure and focus automatically.
3. When the boundary on the monitor screen turns
green, press the shutter button the rest of the
way down.
At this time the camera will go into recording standby
and start pre-recording images and storing them in a
buffer, in accordance with the Prerecord Time setting
you configured in step 10 under “To setup the camera”
on page 71. After the buffer becomes full, new images keep being added while
older images are continually being deleted.
The camera will start saving images automatically the moment it detects that the
subject has moved out of the boundary.
• “0 AUTO” flashes on the monitor screen during recording standby and auto
recording.
4. Image recording will continue until the end of the Prerecord Time is
reached.
• While the camera is in Move Out CS recording standby, you can cancel
standby by pressing the shutter button all the way down. You then will be able
to shoot images normally.
• To stop an ongoing image recording operation, press [SET].
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
B
73
. To shoot using Move In CS
1. Compose the image at a location where you expect the subject to enter
the boundary on the monitor screen.
2. Half-press the shutter button.
• The camera will adjust exposure and focus automatically.
recommended.
3. When the boundary on the monitor screen turns
green, press the shutter button the rest of the
way down.
At this time the camera will go into recording standby
and start pre-recording images and storing them in a
buffer, in accordance with the Prerecord Time setting
you configured in step 10 under “To setup the camera”
on page 71. After the buffer becomes full, new images
keep being added while older images are continually
being deleted.
Boundary
The camera will start saving images to memory automatically the moment it
detects the subject has moved into the area within the boundary.
• “0 AUTO” flashes on the monitor screen during recording standby and auto
recording.
4. Image recording will continue until the end of the Prerecord Time is
reached.
• While the camera is in Move In CS recording standby, you can cancel standby
by pressing the shutter button all the way down. You then will be able to shoot
images normally.
• To stop an ongoing image recording operation, press [SET].
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
B
74
NOTE
• Compose the image so the entire subject and its background are within the
boundary. Recording may not be performed correctly if there is little difference
between the subject and the part of the background enclosed by the boundary.
Also, Move Out CS may not record correctly if the subject is not in the center of the
boundary.
• Move In CS and Move Out CS do not operate correctly if you press the shutter
button all the way down. Be sure to half-press the shutter button. After images are
pre-recorded, press the shutter button the rest of the way down.
• After pressing the shutter button all the way to put the camera into record standby,
keep the camera still. Recording may not be performed correctly if you move the
camera during record standby.
• The following mode dial settings are ignored when shooting with this BEST SHOT
scene: t (Single Shot), × (High-speed CS), ª (Flash CS).
• The sleep mode and Auto Power Off are disabled while the camera is in record
standby.
• The camera may not start recording automatically or camera power may turn off
when battery power is low. Always make sure that the battery is sufficiently
charged or use the optional AC adaptor before using these features.
continuous shutter image save method. If you do, make sure that the memory card
loaded in the camera has enough free space to store them.
• Zoom is disabled, and focus and exposure are fixed while the camera is in
recording standby.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
75
Advanced Settings
The following are menu operations you can use to configure various camera settings.
Using On-screen Menus
. Example Menu Screen Operation
Press [MENU] to display the menu screen.
• Menu contents are different in the REC mode and PLAY mode.
Example: REC mode menu
[8] [2] [4] [6]
[MENU]
Menu Screen Operation Buttons
[SET]
Selects tabs. [6] is also used to display the options available for a
setting.
[4] [6]
[8] [2]
[SET]
Selects a setting option.
Registers the selected setting.
Exits the menu screen.
[MENU]
1. In the REC mode, press [MENU].
This will display the menu screen.
2. Use [4] and [6] to select the tab where the item you want to configure
is located.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
76
3. Use [8] and [2] to select the menu item you
want, and then press [6].
Example:
When “Self-timer” is
selected on the “REC” tab
4. Use [8] and [2] to change the setting.
Tabs
5. After the setting is the way you want, press
[SET].
• Pressing [4] registers the selected setting and
returns to the menu.
• To configure settings on another tab after
pressing [4] to return to the menu, use [8] to
move the highlighting up to the tabs, and then
use [4] and [6] to select the tab you want.
Items
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following
Use [4] and [6] to select the “REC” tab.
Procedure
[r] (REC)
*
[MENU]
*
REC Tab
*
Self-timer
Press [r].
Press [MENU].
Use [8] and [2] to select the “Self-timer”
and then press [6].
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
77
REC Mode Settings (REC)
Using the Self-timer (Self-timer)
Procedure
[r] (REC) *[MENU] * REC Tab * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
„
10 sec 10-second Self-timer
2-second Self-timer
• When shooting under conditions that slow down the shutter speed,
you can use this setting to prevent image blur due to camera
movement.
‚
2 sec
Shoots three images: one image 10 seconds after the shutter button
is pressed, and the next two images as soon as the camera is ready
after shooting the previous image. How long it takes for the camera to
get ready to shoot depends on the image size and quality settings,
whether or not a memory card is loaded in the camera, and the flash
charge condition.
”
(Triple
Self-timer)
X3
Off
Self-timer is disabled.
• The front lamp flashes while the Self-timer countdown is
in progress.
Front lamp
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
NOTE
• The Self-timer cannot be used together with the following features.
High-speed CS with Prerecord (Still image), movie recording with Prerecord
(Movie), Move Out CS, Move In CS, Multi-motion Image
• The Triple Self-timer cannot be used together with the following features.
High-speed CS, Flash CS, Movie
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Using the Auto Focus Assist Light (AF Assist Light)
Procedure
[r] (REC) * [MENU] * REC Tab * AF Assist Light
Half-pressing the shutter button while this setting is
selected causes the front lamp to light, which provides
illumination for focusing in areas where lighting is dim.
Leaving this function turned off is recommended when
shoot portraits from short distances, etc.
Front lamp
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Make sure your finger is not covering the front lamp.
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Procedure
[r] (REC) * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
D
A
S
Auto
Minimizes the effects of camera and subject movement
Minimizes the effects of camera movement only
Minimizes the effects of subject movement only
Camera AS
Image AS
A
Half-pressing the shutter button demonstrates the effect of “
Camera AS”. However, the image is not recorded.
F
DEMO
Off
Turns off all Anti Shake settings
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
79
NOTE
A
• Only “
Camera AS” can be used during movie recording.
• If the flash fires, the Anti Shake icon will remain on the display, even though Anti
Shake does not function during flash photography.
• Shooting with Anti Shake can cause an image to appear somewhat coarser than
normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
A
• “
Camera AS” may not work properly when the camera is mounted on a tripod.
Either turn off Anti Shake or select “S Image AS”.
Camera AS” when the Anti Shake setting is “D Auto”, and “Off” when the Anti
Shake setting is “S Image AS”.
Shooting with Face Detection (Face Detection)
Procedure
[r] (REC) * [MENU] * REC Tab * Face Detection
The face detection feature adjusts focus and brightness to the faces in the image.
1. Use [4] and [6] to select “On” and then press [SET].
2. Point the camera at the subject (s).
The camera will detect human faces and display a
frame around each one.
3. Half-press the shutter button.
The camera will focus and the frames around the
faces it focuses on will turn green.
4. Press the shutter button the rest of the way down.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Tips for Best Face Detection Results
• The camera performs center focus if it cannot detect a face.
• Always make sure that Auto Focus (AF) is selected as the focus mode when
shooting with face detection.
• Detection of the following types of faces is not supported.
– A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is very dark
– A face of a pet or some other non-human subject
IMPORTANT!
• Face detection cannot be used in combination with any of the following features.
– Some BEST SHOT scenes (Digital Panning, Move Out CS, Move In CS, Multi-
motion Image)
– YouTube
– Prerecord (Movie)
– Movie Mode
– High-speed CS with Prerecord (Still image)
• @ (Focus) is disabled while face detection is turned on.
Shooting with Continuous Auto Focus (Continuous AF)
Procedure
[r] (REC) * [MENU] * REC Tab * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is
performed and focusing is continually updated until you half-press the shutter button.
• Continuous Auto Focus is performed during movie recording when optical zoom is
turned on while “HD/STD” is selected as the movie mode, regardless of the current
Continuous AF setting. If optical zoom is turned off, continuous Auto Focus is not
performed during movie recording, regardless of the current Continuous AF setting.
• Before you half-press the shutter button, the camera focuses at the center of the
press the shutter button, focusing is performed for the area specified by “— Free”.
If “Face Detection” is turned on, focusing is performed in the area where a face is
detected.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Specifying the [AEL] button Operation (AE/AF Lock)
Procedure
[r] (REC) * [MENU] * REC Tab * AE/AF Lock
Configuring the Continuous Shutter Image Save Method
(Save CS Images)
Procedure
[r] (REC) * [MENU] * REC Tab * Save CS Images
Turning Digital Zoom On or Off (Digital Zoom)
Procedure
[r] (REC) * [MENU] * REC Tab * Digital Zoom
• Digital zoom is disabled while shooting with the following features.
– Some BEST SHOT scenes (High Speed Anti Shake, Digital Panning)
– High-speed movie recording
– “Á Super Macro” selected for the focus mode
– “RAW+” image size
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
82
B
Shooting with Quick Shutter (Quick Shutter)
Procedure
[r] (REC) * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without
waiting for Auto Focus. This will record the image using a high-speed focus operation
that is much faster than Auto Focus.
Turns on Quick Shutter
• Some images may be out of focus when Quick Shutter is used.
On
Turns off Quick Shutter so focus is performed using normal Auto Focus
before the image is recorded.
• If you fully press the shutter button while Quick Shutter is turned off,
images will continue to be shot without focusing.
Off
• Whenever possible, take a little extra time to half-press the shutter button
in order to ensure proper focus.
NOTE
• Quick Shutter is disabled when the zoom factor is greater. Recording is performed
using Auto Focus at this time.
Turning on Image Review (Review)
Procedure
[r] (REC) * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a image for about one second
immediately after you press the shutter button to record it.
• Image review is available only when shooting single images. It does not work with
continuous shutter.
Displaying the On-screen Grid (Grid)
Procedure
[r] (REC) * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode
monitor screen for easy vertical and horizontal alignment
when composing images.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Using Icon Help (Icon Help)
Procedure
[r] (REC) * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for
certain icons when you switch between REC functions.
Function Supported by Icon Help
• REC Mode
Configuring Power On Default Settings (Memory)
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
When you turn off the camera, it remembers the current settings of all enabled
memory items and restores them when you turn it back on. Any memory item that is
disabled will be returned to its initial default setting whenever you turn off the camera.
Setting
Disabled (Initial Default Setting)
Enabled
Flash
Auto
Self-timer
Off
Flash Intensity
Digital Zoom
MF Position
Zoom Position*
0
Setting at
power off
Off
Position before manual focus was selected.
Full wide
* Optical zoom setting only.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Image Quality Settings (Quality)
Specifying Snapshot Image Quality (T Quality (Snapshot))
Procedure
[r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot)
Fine
Gives image quality priority
Normal
Normal
Economy
Gives the number of images priority
• The “Fine” setting helps to bring out details when shooting a finely detailed image
that includes dense tree branches or leaves, or an image of a complex pattern.
• Memory capacity (the number of images you can record) will be affected by the
quality settings you configure (page 168).
Reducing Underexposure and Overexposure (Dynamic Range)
Procedure
[r] (REC) * [MENU] * Quality Tab * Dynamic Range
You can adjust the Dynamic Range setting in order to capture the bright areas of an
image while reducing the chance of overexposure and underexposure.
Suppresses overexposure and underexposure more than
“Expand +1”
Expand +2
Expand +1
Off
Suppresses overexposure and underexposure
No suppression of overexposure and underexposure
• The dynamic range setting is ignored during high-speed movie recording.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Specifying Flash Intensity (Flash Intensity)
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify flash intensity to one of 13 levels from +2 (brightest flash) to –2 (least
bright flash).
• Flash intensity may not change when the subject is too far away or too close.
Turning On Flash Assist (Flash Assist)
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Assist
The subject in an image will look
too dark if flash intensity is not
enough to reach a subject that is
too far away. When this happens,
you can use flash assist to
supplement the brightness of the
subject so it appears as if flash
illumination was sufficient. Select
“Auto” to turn on Flash Assist.
Flash Assist may not produce the
Flash assist turned off
Flash assist turned on
desired result if you use it after changing the initial default settings of any of the
following.
Flash Intensity, EV Shift, ISO, Contrast
Using Built-in Color Filters (Color Filter)
Procedure
[r] (REC) * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Controlling Image Sharpness (Sharpness)
Procedure
[r] (REC) * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Controlling Color Saturation (Saturation)
Procedure
[r] (REC) * [MENU] * Quality Tab * Saturation
You can specify one of five saturation settings from +2 (most saturated) to –2 (least
saturated).
Adjusting Image Contrast (Contrast)
Procedure
[r] (REC) * [MENU] * Quality Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and
dark) to –2 (least contrast between light and dark).
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Viewing Snapshots and Movies
Viewing Snapshots
Viewing a Movie
1. Press [p] (PLAY) and then use [4] and [6] to display the movie you
want to view.
2. Press [SET] to start playback.
Movie icon: »
Recording time
Image quality
Movie Playback Controls
During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image is
[4] [6]
zoomed.
[SET]
Toggles between pause and play.
[DISP]
Cycles through information display formats.
Zooms the image.
• You can use [8], [2], [4], and [6] to scroll the zoomed image on
the monitor screen.
Zoom
controller
Adjusts audio volume during playback.
• Audio adjustment is not possible for a movie that does not include
audio.
[8] [2]
[MENU]
Ends movie playback.
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
88
B
Viewing Continuous Shutter Images
Each time you perform a continuous shutter (CS)
operation, the camera creates a CS group that
includes all of the images for that particular CS
session. You can use the following procedure to play
back the images in a particular CS group.
Number of image files in the
CS group
CS group icon
1. Press [p] (PLAY) and then use [4] and [6]
to display the CS group whose images you
want to view.
2. Press [SET] to start playback the images in
First image in the CS group
the CS group.
This will play back the images in the CS group you
selected.
Current image number/number of images in the group
CS speed
Playback guide
Playback Controls
During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image is
zoomed.
[4] [6]
[SET]
Toggles between pause and play.
[DISP]
Cycles through information display formats.
Zooms the image.
• You can use [8], [2], [4], and [6] to scroll the zoomed image on
the monitor screen.
Zoom
controller
[8]
[2]
Exits CS group playback.
Displays the delete menu.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
89
Deleting Continuous Shutter Images
You can use the following procedures to delete images while playback is in progress
or paused.
. Deleting a Specific CS Group File
1. While CS image playback is in progress or paused, press [2].
2. Use [4] and [6] to display the image you want to delete.
3. Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [MENU].
. Deleting All Files in a CS Group
1. While CS image playback is in progress or paused, press [2].
2. Use [8] and [2] to select “Del Group Images” and then press [SET].
3. Use [8] and [2] to select “Yes”, and then press [SET].
Dividing Up a CS Group
Use the following to divide up a CS Group into individual images.
. Dividing Up a Specific CS Group
1. While a CS group folder is displayed, press [MENU].
2. Use [4] and [6] to select “PLAY”.
3. Use [8] and [2] to select “Divide Group” and then press [6].
4. Use [4] and [6] to display the CS group folder whose CS group you
want to divide up.
5. Use [8] and [2] to select “Divide” and then press [SET].
• To divide up other CS group files, repeat steps 4 and 5.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
90
. Dividing Up All CS Groups
1. While a CS group folder is displayed, press [MENU].
2. Use [4] and [6] to select “PLAY”.
3. Use [8] and [2] to select “Divide Group” and then press [6].
4. Use [8] and [2] to select “Divide All Groups” and then press [SET].
5. Use [8] and [2] to select “Yes”, and then press [SET].
• Once a CS group is divided, it cannot be regrouped.
Copying a CS Group Image
Use the following procedure to copy an image in a CS group to a location outside of
the group.
1. While a CS group folder is displayed, press [SET].
2. While an image inside the CS group is displayed, press [MENU].
3. Use [4] and [6] to select “PLAY”.
4. Use [8] and [2] to select “Select Frame”, and then press [6].
5. Use [4] and [6] to display the image you want to copy.
6. Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS group folder.
Before using either of these functions, perform the above procedure (Select
Frame) to copy the image first.
Cropping, Rotation, Resize
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
91
Zooming an On-screen Image
1. In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2. Slide the zoom controller towards z ([) to
Zoom factor
zoom.
Image area
You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. Slide the zoom controller
towards w to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
– To exit the zoom screen, press [MENU].
– Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to
the full 8X.
Current display area
Displaying the Image Menu
1. In the PLAY Mode, slide the zoom controller
towards w (]).
Boundary
Use [8], [2], [4] and [6] to move the selection
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to
move the selection boundary to the image you want and
then press [SET].
• In the case of a movie or a continuous shutter (CS)
file, the first frame of the file will be displayed.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Viewing Snapshots and Movies on a TV Screen
1. Use the AV cable that comes with the camera to connect it to the TV.
AV cable (bundled)
Yellow
White
USB/AV port
Video
Audio
TV
AUDIO IN jack (white)
VIDEO IN jack (yellow)
Making sure that the 6 mark on the
camera is aligned with the 4 mark of
the AV cable connector, connect the
cable to the camera.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will
be able to see the metal part of the connector as shown in the
illustration.
• Before connecting to a TV to display images, be sure to
configure the camera’s [r] (REC) and [p] (PLAY) buttons
for “Power On” or “Power On/Off” (page 132).
• Make sure that the camera is turned off before plugging in or unplugging the
cable. Check the user documentation that comes with the TV for information
about requirements before plugging into or unplugging from the TV.
2. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
93
3. Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.
• Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV
cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 133).
4. Now you can display images and play back movies as you normally do.
Recording Camera Images to a DVD Recorder or Video Deck
Use one of the following methods to connect the camera to the recording device
using the camera’s bundled AV cable.
– DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
– Camera: USB/AV port
You can play a slideshow of snapshots and movies on the camera and record it on a
DVD or video tape. You can record movies by selecting “» Only” for the slideshow
For information about connecting a monitor to the recording device and about how to
record, see the user documentation that comes with the recording device you are
using.
NOTE
• Audio is monaural.
• Some TVs may not be able to output images and/or audio correctly.
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
• All icons and indicators that appear on the monitor screen also appear on the TV
screen. You can use [DISP] to change the display contents.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
94
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform
other playback operations.
Playing a Slideshow on the Camera (Slideshow)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
Start
Starts the slideshow
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
Z
All images except
T
: All non-continuous shutter (CS) images
Images
Only: Snapshots only
» Only: Movies only
One Image: One single selected image (selected using [4] and [6])
Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Time
Amount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, movies play from beginning
to end.
Interval
When the slideshow reaches a movie file while “MAX” is selected, only
the first frame of the movie will displayed.
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change
effect.
• Patterns 1 through 4 have different background music, but they all use
the same image change effect.
• Pattern 5 can be used for playback of snapshots only (except for
those that are part of a CS group), and the “Interval” setting is ignored.
• Movies that include audio are played back without BGM. Movies that
do not include audio are played back with BGM.
• The currently selected image change effect setting is disabled
automatically in following cases.
Effect
– When playing a slideshow for which “» Only” or “One Image” is
selected for the “Images” setting
– When the interval setting is 1 second or 2 seconds.
– Before and after playback of a movie
– During CS group playback
Off: No image change effect or background music
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
95
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one
image to another.
• The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
Creating a Snapshot of Movie Frames (MOTION PRINT)
Procedure
[p] (PLAY) * Movie Screen * [MENU] * PLAY Tab *
MOTION PRINT
1. Use [4] and [6] to scroll
through the movie frames
and display the one you
want to use as the image
of the MOTION PRINT
image.
Holding down [4] or [6]
scrolls at high speed.
9 frames
1 frame
2. Use [8] and [2] to select either “9 frames” or “1 frame” and then
press [SET].
• When “9 frames” is selected, the frame you select in step 1 will be in the center
of the MOTION PRINT image.
• Only the frames of movies recorded on this camera can be used in a MOTION
PRINT image.
• Motion print cannot be used to capture frames from a 1000 fps high-speed
movie recorded in the YouTube mode.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
96
Editing a Movie on the Camera (Movie Editing)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] *
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
}
(To-Point Cut)
Cut
Cuts everything from the beginning of the movie up to the
current location.
~
Cut
(Point-To-Point Cut)
Cuts everything between two points.
¡
Cut
(From-Point Cut)
Cuts everything from the current location to the end of the
movie.
1. Use [8] and [2] to select the editing method you want to use and then
press [SET].
2. Use the following operations to select the frame
(point) from which or to which you want to cut
the movie (the cut point).
During playback, changes the playback
[4] [6] direction and playback speed. While
playback is paused, scrolls forward or back.
Cut range (yellow)
[SET]
Toggles between pause and play.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
97
3. When the frame where you want the cut point to be is displayed, press
[2].
}
Cut
(To-Point Cut)
While the frame you want the cut to be up to is
displayed, press [2].
While the frame you want the first (From) cut to be is
displayed, press [2].
1
~
Cut
(Point-To-Point Cut)
Select another frame.
While the frame you want the second (To) cut to be
is displayed, press [2].
2
3
¡
Cut
(From-Point Cut)
While the frame you want the cut to be from is
displayed, press [2].
4. Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
• You also can start a movie editing operation while the movie you want to edit is
playing back. Press [SET] to pause playback, and then press [2] to display the
menu of editing options. Perform editing using the same procedures as described
above.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
98
Adjusting White Balance (White Balance)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
White Balance
You can use the white balance setting to select a light source type for a recorded
image, which will affect the colors of the image.
¤
'
“
Daylight
Overcast
Shade
Outdoors, fair weather
Outdoors, cloudy to rain, in tree shade, etc.
Very high temperature light, such as building shade, etc.
†
Day White
Fluorescent
White or day white fluorescent lighting, without suppressing
color cast
–
Daylight
Fluorescent
Daylight fluorescent lighting, while suppressing color cast
«
Tungsten
Suppressing of the appearance of light bulb lighting
No white balance adjustment
Cancel
NOTE
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
99
Adjusting the Brightness of an Existing Snapshot
(Brightness)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
NOTE
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Selecting Images for Printing (DPOF Printing)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
100
Protecting a File Against Deletion (Protect)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Protect
Protects specific files.
Use [4] and [6] to scroll through the files
until the one you want to protect is
displayed.
1
Use [8] and [2] to select “On” and then
press [SET].
2
On
An image that is protected is indicated by
the › icon.
To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file,
select “Off” instead of “On” in step 2 above.
3
Protects all files.
Use [8] and [2] to select “All Files: On” and then press [SET].
Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in
step 1 above.
1
2
All Files:
On
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 135).
NOTE
• Performing the above procedure while a CS group folder is displayed will protect all
the images in the CS group folder. You can protect individual images in a CS group
by performing the above procedure while the image is displayed.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Rotating an Image (Rotation)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation
1. Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2. When the displayed image is at the orientation you want, press
[MENU].
NOTE
• Rotation of movie images is not supported.
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu
screen.
Resizing a Snapshot (Resize)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can resize an image to one of three image
sizes: 5M, 2M, VGA.
• Resizing a 16:9 or 3:2 size snapshot will create an image with an aspect ratio of
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Cropping a Snapshot (Trimming)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming
You can crop a snapshot to trim parts you do not need, and
save the result in a separate file. The original snapshot is
also retained.
Zoom factor
Represents
snapshot area
Use the zoom controller to zoom the image to the size you
want, use [8], [2], [4], and [6] to display the portion of
the image you want to cut out, and then press [SET].
• The image produced by cropping a 3:2 or 16:9 image will
have an aspect ratio of 4:3.
• The recording date of the cropped image will be the
same as the recording date of the original snapshot.
Part of snapshot that is
currently displayed
Copying Files (Copy)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a
memory card to built-in memory.
Copies all files from built-in camera memory to a memory card.
Built-in * Card This option copies all the files in built-in camera memory. It
cannot be used to copy a single file.
Copies a single file on the memory card to camera built-in
camera memory. Files are copied to the folder in built-in
memory whose name has the largest serial number.
Card * Built-in
• You cannot copy a continuous shutter (CS) group image
(page 91).
Use [4] and [6] to select the file you want to copy.
Use [8] and [2] to select “Copy” and then press [SET].
1
2
NOTE
• You can copy snapshots or movies you recorded with this camera.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
103
Dividing Up a Continuous Shutter Group (Divide Group)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Divide Group
Copying a Continuous Shutter Group (Select Frame)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Select Frame
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
104
Printing
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print
images directly from a memory card. For details, see the user
documentation that comes with your printer.
Connecting Directly to a PictBridge Compatible
Printer
You can print on a printer that supports PictBridge (page
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
• You can specify which images you want to print, the number of copies, and date
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Connecting Directly to a PictBridge Compatible Printer
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
. To set up the camera before connecting to a printer
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
. Connecting the Camera to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to
your printer’s USB port.
USB cable
Large
connector
USB/AV port
USB
Small connector
USB port
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the USB cable
connector, connect the cable to the camera.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you still will be
able to see the metal part of the connector as shown in the
illustration.
• When connecting the USB cable to a USB port, make sure you
align the connector correctly with the port.
• Make sure that the camera is turned off before plugging in or unplugging the cable.
Check the user documentation that comes with the printer for information about
requirements before plugging into or unplugging from the printer.
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
106
. To print
1. Turn on the printer and load paper.
2. Turn on the camera.
This will display the print menu screen.
3. Use [8] and [2] to select “Paper Size”, and then press [6].
4. Use [8] and [2] to select a paper size and then press [SET].
• The following are the available paper sizes.
x
x
x
x
3.5" 5", 5" 7", 4" 6", A4, 8.5" 11", By Printer
• Selecting “By Printer” prints using a paper size selected on the printer.
• See the documentation that comes with your printer for information about
paper settings.
5. Use [8] and [2] to specify the print option you want.
1 Image
: Prints one image. Select and then press [SET]. Next, use [4] and
[6] to select the image you want to print.
DPOF Printing: Prints multiple images. Select and then press [SET]. With this
option, images will be printed in accordance with DPOF settings
• To toggle date stamping on and off, press [BS]. The date stamp will be printed
when “On” is indicated on the monitor screen.
6. Use [8] and [2] to select “Print” and then press [SET].
Printing will start and the message “Busy... Please wait...” will appear on the
monitor screen. The message will disappear after a short while, even though
printing is still being performed. Pressing any camera button will cause the
printing status to re-appear. The print menu screen will re-appear when printing is
complete.
• If you selected “1 Image”, you can repeat the procedure from step 5, if you
want.
7. After printing is complete, turn off the camera and disconnect the USB
cable from the printer and camera.
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Using DPOF to Specify Images to be Printed and the Number
of Copies
. Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy,
and time stamp on/off information on the memory card with the images.
After configuring settings, you can use the memory card to print on a home
printer that supports DPOF or take the memory card to a professional print
service.
• Whether or not you will be able to use DPOF settings for printing depends on the
printer you are using.
• Some professional print services may not support DPOF.
. Configuring DPOF Settings Individually for Each Image
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * Select images
1. Use [4] and [6] to scroll through the files until the image you want to
print is displayed.
2. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] so “On” is shown for
date stamping.
• Repeat steps 1 and 2 to configure settings for other images, if you want.
3. Press [SET].
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
108
. Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * All images
1. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] so “On” is shown for
date stamping.
2. Press [SET].
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “00” for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don’t, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
109
. Date Stamping
You can use one of the following three methods to include the recording date in the
printout of an image.
Configure DPOF settings (page 108).
You can turn date stamping on and off each time you print. You
can configure settings so some images include the date stamp
and some don’t.
Configuring
camera settings
• The camera’s Timestamp setting imprints the date into a
snapshot when you shoot it, so the date is always included
when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that
includes a date stamped with the camera’s Timestamp
function. Doing so can cause the two stamps to be
overprinted.
Configuring
computer
settings
You can use commercially available image management
software to date stamp images.
Professional
print service
Request date stamping when ordering prints from a professional
print service.
. Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association
(CIPA).
• PRINT Image Matching III
Using image editing software and printing on a printer that supports
PRINT Image Matching III makes it possible to use information about
shooting conditions that is recorded with the image, and produce
exactly the type of image you want. PRINT Image Matching and
PRINT Image Matching III are trademarks of Seiko Epson Corporation.
• Exif Print
Printing on a printer that supports Exif Print (Exif 2.2) uses
information about shooting conditions recorded with the image to
enhance printed image quality. Contact your printer manufacturer
for information about models that support Exif Print, printer upgrades, etc.
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Using the Camera with a Computer
Things you can do using a computer...
You can perform the operations described below while the camera is connected to a
computer.
Save images to a
computer and
• Save images and view them manually
view them there
Playback and
edit movies
121).
• To edit movies, use commercially
available software as required.
The procedures you need to perform when using the camera with your computer and
when using the bundled software are different for Windows and the Macintosh.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
B
111
Using the Camera with a Windows Computer
Install the required software in accordance with the version of Windows you are
running and what you want to do.
When you want
to do this:
Operating
System Version
See
page:
Install this software:
Save images to a
computer and view
them there
Vista / XP / 2000 Installation not required.
manually
DirectX 9.0c
Windows 2000
Users of the above operating
systems also need to install
DirectX 9.0c if DirectX 9.0 or
greater is not already installed on
your system.
• Windows Media Player is not
Play movies
Vista / XP / 2000
included on the CD-ROM that
comes bundled with the camera,
but it is included with Windows.
Use the Windows Media Player
application that is installed with
Windows for playback.
–
Edit movies
Vista / XP / 2000 • Use commercial software as
required.
–
Upload movie files Vista / XP (SP2) /
YouTube Uploader for CASIO
to YouTube
2000 (SP4)
Vista / XP (SP2) / Adobe Reader 8
2000 (SP4) (Not required if already installed.)
View the User’s
Guide
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
112
. Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the
“Read me” file that comes with each application for details. Information about
computer system requirements also can be found under “Computer System
. Precautions for Windows Users
• The bundled software will not run under 64-bit versions of Windows Vista.
• Except for DirectX and Adobe Reader, the bundled software requires Administrator
privileges to run.
• Operation on under a dual-processor environment is not supported.
• Operation may not be possible under certain computer environments.
Viewing and Storing Images on a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
. To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
113
4. Turn off the camera and then use the USB cable that comes with the
camera to connect it to your computer.
USB port
USB cable
USB/AV port
Large connector
Small connector
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the USB cable
connector, connect the cable to the camera.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will
be able to see the metal part of the connector as shown in the
illustration.
• When connecting the USB cable to a USB port, make sure you
align the connector correctly with the port.
• Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer’s USB port.
5. Turn on the camera.
6. Copy images to your computer.
Windows XP
Select “Open folder to view files” and then click “OK”.
1
Drag the “DCIM” folder to your Windows desktop to copy it.
2
Windows Vista
Select “Open folder to view files”.
1
Drag the “DCIM” folder to your Windows desktop to copy it.
2
Windows 2000
Double-click “My Computer”.
1
Double-click “Removable Disk”.
2
Drag the “DCIM” folder to your Windows desktop to copy it.
3
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
114
7. After you finish copying images, disconnect the camera from the
computer.
Windows Vista, Windows XP
On the camera, press [ON/OFF] to turn off the camera. After making sure that the
back lamp is unlit, disconnect the camera from the computer.
Windows 2000
Click card services in the task tray on your computer screen, and disable the
drive number assigned to the camera. Next, after making sure that the back lamp
is unlit, press the camera’s [ON/OFF] button to turn off the camera and
disconnect the camera from your computer.
. To view images you copied to your computer
1. Double-click the copied “DCIM” folder to open it.
2. Double-click the folder that contains the images you want to view.
3. Double-click the image file you want to view.
• An image that was rotated on the camera will be displayed on your computer
screen in its original (unrotated) orientation.
IMPORTANT!
• Never use your computer to modify, delete, move, or rename any image files that
are in the camera’s built-in memory or on its memory card. Doing so can cause
problems with the camera’s image management data, which will make it impossible
to play back images on the camera and can drastically alter remaining memory
capacity. Whenever you want to modify, delete, move, or rename an image, do so
only on images that are stored on your computer.
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
115
Playing Movies
Windows Media Player, which is already installed on most computers, can be used
for movie playback. To play back a movie, first copy the movie to your computer and
then double-click the movie file.
. Minimum Computer System Requirements for HD Movie Playback
The minimum system requirements described below are necessary to play back HD
movies recorded with this camera on a computer.
Operating System : Vista / XP / 2000
CPU
: Pentium 4, 3.2 GHz or higher
Required Software: Windows Media Player, DirectX 9.0c or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Try upgrading Windows Media Player to the latest version.
– Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use the AV cable
that comes bundled with the camera to connect to the video input terminal a TV or
computer and play back movies that way.
Uploading Movie Files to YouTube
Installing YouTube Uploader for CASIO from the CD-ROM that comes with your
camera simplifies uploading of movie files you recorded with the YouTube mode to
YouTube.
. What is YouTube?
YouTube is a movie sharing site managed by YouTube, LLC where you can upload
movies and view movies uploaded by others.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
B
116
. To install YouTube Uploader for CASIO
1. On the CD-ROM menu screen, select “YouTube Uploader for CASIO”.
2. After reading the information about installation conditions and system
requirements for installation in the “Read me” file, install YouTube
Uploader for CASIO.
. To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube
website (http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including neighboring copyrights)
unless you yourself own the copyright or you have obtained the permission of the
applicable copyright holder(s).
• The maximum file size for each upload is 100 MB or 10 minutes of playing time.
1. Record the movie you want to upload using the YouTube mode (page
62).
2. If it isn’t already, connect your computer to the Internet.
4. Turn on the camera.
YouTube Uploader for CASIO will start up automatically.
• If this is the first time you are using the application, configure the YouTube user
ID and network environment settings, and then click the [OK] button.
5. The left side of the display will have an area for inputting a title,
category, and other information required for uploading to YouTube.
Enter the required information.
6. The right side of the display shows a list of movie files in camera
memory. Select the check box next to the movie file you want to
upload.
7. When everything is ready, click the [Upload] button.
This will upload the movie file(s) to YouTube.
• After uploading is complete, click the [Exit] button to exit the application.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
B
117
Viewing User Documentation (PDF Files)
1. Start up your computer, and place the bundled CD-ROM into its CD-
ROM drive.
Normally, this should cause the menu screen to appear automatically. If your
computer does not display the menu screen automatically, navigate to the CD-
ROM on your computer and then double-click the “AutoMenu.exe” file.
2. On the menu screen, click the “Language” down arrow button and then
select the language you want.
3. Click “Manual” to select it and then click “Digital Camera”.
IMPORTANT!
• You must have Adobe Reader or Adobe Acrobat Reader installed on your
computer in order to view the contents of a PDF file. If you do not already have
Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the
bundled CD-ROM.
User Registration
You can perform user registration over the Internet. To do so, of course, you need to
be able to connect to the Internet with your computer.
1. On the CD-ROM menu screen, click the “Register” button.
• This starts up your Web browser and accesses the user registration website.
Follow the instructions that appear on your computer screen to register.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
118
Using the Camera with a Macintosh
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
Operating
System
Version
When you want to
do this:
See
page:
Install this software:
Save images to your
Macintosh and view
them there manually
Mac OS 9
Mac OS X
Installation not required.
Save images to your
Macintosh
automatically/Manage
images
Mac OS 9 Use commercially available software.
Use iPhoto, which comes bundled
Mac OS X
with your operating system.
You can playback with QuickTime,
Mac OS 9 /
Play movies
which comes bundled with your
OS X
operating system.
Connecting the Camera to Your Computer and Saving Files
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5) only.
Use the standard USB driver that comes with your supported operating system.
. To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
B
119
4. Turn off the camera and then use the USB cable that comes with the
camera to connect it to your Macintosh.
USB port
USB cable
USB/AV port
Large connector
Small connector
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the USB cable
connector, connect the cable to the camera.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will
be able to see the metal part of the connector as shown in the
illustration.
• When connecting the USB cable to a USB port, make sure you
align the connector correctly with the port.
• Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer’s USB port.
5. Turn on the camera.
The camera’s back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera’s built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
6. Double-click the camera’s drive icon.
7. Drag the “DCIM” folder to the folder to which you want to copy it.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
120
8. After the copy operation is complete, drag the drive icon to Trash.
9. On the camera, press [ON/OFF] to turn off the camera. After making
sure that the green back lamp is unlit, disconnect the camera from the
computer.
. To view copied images
1. Double-click the camera’s drive icon.
2. Double-click the “DCIM” folder to open it.
3. Double-click the folder that contains the images you want to view.
4. Double-click the image file you want to view.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
IMPORTANT!
• Never use your computer to modify, delete, move, or rename any image files that
are in the camera’s built-in memory or on its memory card. Doing so can cause
problems with the camera’s image management data, which will make it impossible
to play back images on the camera and can drastically alter remaining memory
capacity. Whenever you want to modify, delete, move, or rename an image, do so
only on images that are stored on your computer.
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
Transferring Images Automatically and Managing Them on
Your Macintosh
If you are running Mac OS X, you can use the iPhoto application that comes bundled
with the operating system to manage your images. If you are running Mac OS 9, you
will need to use commercially available software.
Playing a Movie
You can use QuickTime, which comes bundled with your operating system, to play
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh
and then double-click the movie file.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
B
121
. Minimum Computer System Requirements for HD Movie Playback
The minimum system requirements described below are necessary to play back HD
movies recorded with this camera on a computer.
Operating System : Mac OS X 10.3.9 or higher
Required Software: QuickTime 7 or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
– Change the movie image quality setting to “STD”.
– Upgrade to the latest version of QuickTime.
– Shut down other applications that are running.
Even if proper playback is not possible on your Macintosh, you can use the AV cable
that comes bundled with the camera to connect to the video input terminal a TV or
Macintosh and play back movies that way.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
Viewing User Documentation (PDF Files)
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer
in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems
Incorporated website and install Acrobat Reader.
1. On the CD-ROM, open the “Manual” folder.
2. Open the “Digital Camera” folder and then open the folder for the
language whose user’s guide you want to view.
3. Open the file named “camera_xx.pdf”.
• “xx” is the language code (Example: camera_e.pdf is for English.)
User Registration
Internet registration only is supported. Visit the following CASIO website to register:
http://world.casio.com/qv/register/
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
B
122
Files and Folders
The camera creates a file and saves it each time you shoot a snapshot, record a
movie, or perform any other operation that stores data. Files are grouped by storing
them in folders. Each file and folder has its own unique name.
Name and Maximum Number Allowed
Example
File
Each folder can contain up to 9999 files named 26th file name:
CIMG0001 through CIMG9999. The extension
CIMG0026.JPG
on the file name depends on the file type.
Serial number Extension
(4 digits)
Folders
Folders are named from 100CASIO to
100th folder name:
999CASIO
100CASIO
There can be up to 900 folders in memory.
• Images recorded with the YouTube mode are
stored in a folder named “100YOUTB”.
Serial number (3 digits)
• You can view folder and file names on your computer. For details about how file
names are displayed on the camera’s monitor screen, see page 157.
• The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
123
Memory Card Data
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
. About DCF
DCF is a standard that makes it possible to view and print images recorded on one
manufacturer’s camera on DCF-compliant devices produced by other manufacturers.
You can transfer DCF-compliant images recorded with another camera to this
camera and view them on this camera’s monitor screen.
. Memory Folder Structure
DCIM
DCIM Folder
Recording Folder
Image File
1
*
100CASIO
CIMG0001.JPG
CIMG0002.AVI
Movie File
1
*
101CASIO
102CASIO
Recording Folder
Recording Folder
1
*
MISC
AUTPRINT.MRK
DPOF File Folder
DPOF File
RAW
RAW Image Folder
RAW Image Record Folder
RAW Image File
3
*
100CASIO
3
*
CIMG001.DNG
2
*
SCENE
Snapshot BEST SHOT User Setup Folder
Startup Image File
2
*
STARTING.JPG
*1 The YouTube mode can be used to record movies are optimized for uploading to
YouTube. Images recorded with the YouTube mode are stored in a folder named
“100YOUTB”.
*2 This folder or file can be created in built-in memory only.
*3 RAW image data is stored with the same file name in a folder with the same folder
name as the corresponding JPEG memory that is recorded at the same time.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
124
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM folders it to
change their names to dates or something similar after you copy them to your
computer. If you later decided to return a DCIM folder to the camera, however, be
sure to change its name back to DCIM. The camera is designed to recognize only a
root file with the name DCIM. Note the camera also will not be able to recognize the
folders inside the DCIM folder unless they have the names they originally had
when you copied them from the camera to your computer.
• You also can use a PC card adapter or a memory card reader/writer to access
camera files directly from the camera’s memory card.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
125
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Adjusting Monitor Screen Brightness (Screen)
Procedure
[MENU] * Set Up Tab * Screen
With this setting, the camera detects available light levels and
Auto 2/ automatically adjusts the brightness of the monitor screen accordingly.
Auto 1 “Auto 2” changes monitor screen brightness relatively more quickly than
“Auto 1” when surrounding light is bright.
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+2
+1
0
Bright setting for outdoor use, etc. Brightness that is greater than 0.
Normal monitor screen brightness for indoor use, etc.
Adjusting Viewfinder Brightness (EVF Brightness)
Procedure
[MENU] * Set Up Tab * EVF Brightness
You can use the above procedure to change the brightness of the viewfinder. You
can select one of three levels from +2 (brightest) to 0 (normal).
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
126
Configuring Camera Sound Settings (Sounds)
Procedure
[MENU] * Set Up Tab * Sounds
Startup
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
Specifies the sound volume. This setting is also used as the
Operation
Play
=
=
Specifies the volume of movie audio output. This volume
setting is not used during video output (from the USB/AV port)
• Setting a volume level of 0 mutes output.
Specifying the File Name Serial Number Generation Rule
(File No.)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial
Tells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
Continue card already has files stored on it and the largest sequential number in
the existing file names is greater than the largest sequential number
remembered by the camera, numbering of new files will start from the
largest sequential number in the existing file names plus 1.
Restarts the serial number from 0001 whenever all files are deleted or
when the memory card is replaced with a blank one. If a memory card
Reset
is loaded and that card already has files stored on it, numbering of new
files will start from the largest sequential number in the existing file
names number plus 1.
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
127
Configuring World Time Settings (World Time)
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1. Use [8] and [2] to select “World” and then press [6].
• To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2. Use [8] and [2] to select “City” and then press [6].
• To change the “World” setting to summer time, use [8] and [2] to select
“DST” and then select “On”. Summer time is used in some geographical areas
to advance the current time setting by one hour during the summer months.
3. Use [8], [2], [4], and [6] to select the geographic area you want and
then press [SET].
4. Use [8] and [2] to select the city you want and then press [SET].
5. Press [SET].
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
128
Time Stamping Snapshots (Timestamp)
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: December 19, 2009, 1:25 p.m.
Date
2009/12/19
Date&Time
Off
2009/12/19 1:25pm
No stamping of date and/or time
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using the DPOF function or some printing application (page 110).
and the display style settings (page 130).
Setting the Camera’s Clock (Adjust)
Procedure
[MENU] * Set Up Tab * Adjust
[8] [2] Change the setting at the cursor location
[4] [6] Move the cursor between settings
[BS]
Toggles between 12-hour and 24-hour format
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
you set the time and date while the wrong city is selected for your Home City, the
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
129
Specifying the Date Style (Date Style)
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three different styles for the date.
Example: December 19, 2009
YY/MM/DD
DD/MM/YY
MM/DD/YY
09/12/19
19/12/09
12/19/09
YY/MM/DD or MM/DD/YY: MM/DD
DD/MM/YY: DD/MM
Specifying the Display Language (Language)
Procedure
[MENU] * Set Up Tab * Language
. Specify the display language you want.
Select the tab on the right.
Select “Language”.
Select the language you want.
1
1
2
3
23
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
130
Configuring Sleep State Settings (Sleep)
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY Mode
– While the camera is connected to a computer or other device
– During a slideshow
– During movie recording and playback
– During Move Out CS or Move In CS auto record standby
– When both sleep and Auto Power Off are turned on, Auto Power Off takes
priority.
Configuring Auto Power Settings (Auto Power Off)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in
the PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During CS group playback
– During movie recording and playback
– During Move Out CS or Move In CS auto record standby
– While the AC adaptor is being used for power
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
131
Configuring [r] and [p] Settings (REC/PLAY)
Procedure
[MENU] * Set Up Tab * REC/PLAY
Camera turns on whenever [r] (REC) or [p] (PLAY) is
pressed.
Power On
Camera turns on or off whenever [r] (REC) or [p] (PLAY)
is pressed.
Power On/Off
Camera does not turn on or off whenever [r] (REC) or [p]
(PLAY) is pressed.
Disable
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC
mode or [p] (PLAY) in the PLAY mode.
• Change this setting to anything besides “Disable” before connecting to a TV for
image viewing.
Controlling Monitor Screen Priority (LCD Priority)
Procedure
[MENU] * Set Up Tab * LCD Priority
You can use this setting to control when the monitor screen turns on.
With this setting, the viewfinder display turns off and the monitor screen
turns on, regardless of the monitor screen/viewfinder setting selected
On
and BEST SHOT scene selection.
always in accordance with the setting selection with the [EVF/LCD] button.
Off
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
132
Configuring USB Protocol Settings (USB)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Select this setting when connecting to a computer (pages 113,
119). With this setting, the computer sees the camera as an
external storage device. Use this setting for normal transfer of
Mass Storage
images from the camera to a computer.
Select this setting when connecting to a printer that supports
PictBridge (page 106). This setting simplifies the transfer of image
data to the connected device.
PTP
(PictBridge)
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC
PAL
Video system used in Japan, the U.S., and other countries
Video system used in Europe and other areas
4:3
Normal TV screen aspect ratio
Wide screen aspect ratio
16:9
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
• REC mode video output is supported only when the aspect ratio setting is 16:9.
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
133
Specifying the Battery Type (Battery Type)
Procedure
[MENU] * Set Up Tab * Battery Type
Configuring a Startup Image (Startup)
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p]
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the
special startup image provided in the camera’s built-in memory.
• You can select the first snapshot of a CS group as the startup image. If you want to
select another image within a CS group, you need to first divide up the CS group or
use the frame select feature to make a copy of the image outside of the CS group.
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
134
Formatting Built-in Memory or a Memory Card (Format)
Procedure
[MENU] * Set Up Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
– BEST SHOT user setups
– Startup screen
• Formatting a memory card will delete the following data.
– Protected images
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress. Doing so can cause
the camera to stop operating normally.
Resetting the Camera to Factory Defaults (Reset)
Procedure
[MENU] * Set Up Tab * Reset
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
135
Configuring Monitor Screen Settings
[
Turning Display Information On and Off (Info)
Each press of [DISP] will cycle through display settings that display or hide on-screen
information and the control panel. You can configure separate settings for the REC
mode and PLAY mode.
Information on,
Displays setting information and the control panel.
control panel on
Displays setting information and the
control panel, and a histogram (page 137)
on the left side of the display.
Information on,
control panel on,
histogram on
Histogram
Information off,
Hides setting information and the control panel.
control panel off
• The control panel is not displayed and display information settings cannot be
changed during movie recording.
Selecting Monitor Screen and Viewfinder Settings
Each press of the [EVF/LCD] button cycles through the
available monitor screen and viewfinder on/off settings.
• Both the monitor screen and viewfinder cannot be
turned on at the same time.
[EVF/LCD]
Viewfinder
Monitor screen
Configuring Monitor Screen Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
136
Using the On-screen Histogram to Check Exposure
(+Histogram)
Displays a histogram on the monitor screen which you can use to
check the exposure of an image before you shoot it. You also can
display the histogram in the PLAY mode for information about the
exposure levels of images.
Histogram
NOTE
• A centered histogram does not necessarily guarantee optimum exposure. The
recorded image may be over-exposed or under-exposed, even though its
histogram is centered.
• Due to the limitations of exposure compensation, you may not be able to achieve
an optimum histogram configuration.
• Use of the flash and certain shooting conditions can cause the histogram to
indicate exposure that is different from the actual exposure of the image when it is
shot.
• The histogram cannot be displayed during High-speed Movie recording.
Configuring Monitor Screen Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
137
How to Use the Histogram
A histogram is a graph that represents the lightness of an image in terms of the
number of pixels. The vertical axis indicates the number of pixels, while the horizontal
axis indicates lightness. If the histogram appears too lopsided for some reason, you
can use EV shift to move it left or right in order to achieve better balance. Optimum
exposure can be achieved by EV shifting so the graph is as close to the center as
possible. For snapshots, you can even display individual histograms for R (red), G
(green), and B (blue).
Example Histograms
A histogram towards the left side results when the
overall image is dark. A histogram that is too far to
the left may result in “black out” of the dark areas
of an image.
A histogram towards the right side results when
the overall image is light. A histogram that is too
far to the right may result in “white out” of the light
areas of an image.
An overall well-balanced histogram results when
the overall image is at optimal lightness.
Configuring Monitor Screen Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
138
Appendix
Precautions during Use
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an automobile
or other vehicle, or while walking. Looking at the monitor while in motion creates
the risk of serious accident.
. Directly Viewing the Sun or Bright Light
• Never look at the sun or any other bright light through the cameras viewfinder.
Doing so can damage your eyesight.
. Flash
• Never use the flash unit in areas where flammable or explosive gas may be
present. Such conditions create the risk of fire and explosion.
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so
can interfere with the driver’s vision and creates the risk of accident.
• Never fire the flash too close to the eyes of the subject. Doing so creates the risk of
loss of eyesight.
. Display Panel
• Do not apply strong pressure to the LCD panel surface or subject it to strong
impact. Doing so can cause the display panel glass to crack.
• Should the display panel ever become cracked, never touch any of the liquid inside
the panel. Doing so creates the risk of skin inflammation.
• Should display panel liquid ever get into your mouth, immediately rinse your mouth
out and contact your physician.
• Should display panel liquid ever get into your eyes or onto your skin, immediately
rinse with clean water for at least 15 minutes and contact your physician.
. Connections
• Never plug any devices that are not specified for use with this camera into
connectors. Connecting a non-specified device creates the risk of fire and electric
shock.
. Transport
• Never operate the camera inside of an aircraft or anywhere else where operation of
such devices is restricted. Improper use creates the risk of serious accident.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
139
. Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor, or while it
is overheating creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the batteries from the camera, taking care to protect yourself against
burn injury.
3. Contact your dealer or nearest CASIO authorized service center.
. Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside the camera
creates the risk of fire and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present. Particular care is required when
using the camera where it is raining or snowing, near the ocean or other body of
water, or in a bathroom.
1. Turn off the camera.
2. Remove the batteries from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other rough
treatment creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the batteries from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and creates the risk
of fire and electric shock.
. Disassembly and Modification
• Never try to take the camera apart or modify it in any way. Doing so creates the risk
of electric shock, burn injury, and other personal injury. Be sure to leave all internal
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized
service center.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
140
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so creates
the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed
vehicle parked in the sun, or other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can
cause the camera to fall, creating the risk of personal injury.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by transferring it
to a computer or other storage device. Note that data can be deleted in the case of
camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the batteries, be sure to follow the correct procedure as
described in the documentation that comes with the camera. Incorrectly replacing
the batteries can result in corruption or loss of data in camera memory.
. Batteries
• Misuse of batteries can cause them to leak, which damages and corrodes the area
around the batteries and creates the risk of fire and personal injury. Make sure you
observe the following precautions when using batteries.
– Never try to take batteries apart and never allow them to become shorted.
– Do not expose batteries to heat or fire.
– Never mix new batteries with old ones.
– Never mix batteries of different types.
– Do not charge non-rechargeable batteries.
– When loading batteries, make sure their positive (+) and negative (–) ends are
facing correctly.
– When using rechargeable batteries, be sure to read the Safety Precautions
section of the user documentation that comes with them.
– Use only the batteries that are specified for this camera.
– If you do not plan to use the camera for a long time, remove its batteries.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
141
. Alkaline Batteries
• Should liquid from an alkaline battery ever get into your eyes, take the following
steps.
1. Immediately rinse your eyes with clean water. Do not rub!
2. See a physician as soon as possible.
Failure to clean alkaline battery fluid from the eyes creates the risk of loss of sight.
. Rechargeable Batteries
• Should you ever notice any of the following conditions while using, charging, or
storing batteries, immediately remove them from the camera, and keep them away
from open flame:
– Fluid leaking
– Emission of a strange odor
– Heat emission
– Battery discoloration
– Battery deformation
– Any other battery abnormality
• Failure to observe any of the following precautions while using batteries creates
the risk of overheating, fire, and explosion.
– Never use or leave batteries near open flame.
– Never place batteries in a microwave oven, throw them into fire, or otherwise
expose them to intense heat.
– Make sure batteries are oriented correctly when you load them into the camera.
– Never carry or store batteries together with items that can conduct electricity
(necklaces, pencil lead, etc.).
– Never try to take batteries apart, modify them in any way, or expose them to
strong impact.
– Do not immerse batteries in fresh water or salt water.
– Do not use or leave batteries under direct sunlight, in an automobile parked in
the sun, or in any other area subject to high temperatures.
• Battery fluid can damage your eyes. Should battery fluid get into your eyes
accidentally, immediately rinse them with clean tap water and then consult a
physician.
• If batteries are to be used by young children, make sure that a responsible adult
makes them aware of the precautions and proper handling instructions, and make
sure that they handle batteries correctly.
• Should fluid from batteries accidentally get onto clothing or your skin, immediately
rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin
irritation.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
142
. Battery Life
• The battery lives noted in the User’s Guide are approximate values until power
fails, based on use of batteries of recommended brands at temperature 23°C
(73°F), and do not guarantee you will be able to achieve operation for the life
noted. Actual battery life is greatly affected by the battery brand, battery production
date, and ambient temperature.
• Leaving the camera on can run down batteries and cause the low battery warning
to appear. Turn off the camera whenever you are not using it.
• Sometimes, the camera may shutdown after the low battery warning appears. If
this happens, immediately replace both of the batteries. Leaving low or dead
batteries in the camera can lead to battery leakage and data corruption.
• Though you could use alkaline batteries when there are no other types of batteries
available, note that the life of alkaline batteries will be very short. Use of
rechargeable Ni-MH batteries is recommended.
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory and camera
malfunction.
• Removing the batteries or memory card while the camera is performing some
operation
• Removing the batteries or memory card while the back lamp is flashing green after
turning off the camera
• Disconnecting the USB cable while communication is in progress
• Low battery power
* Note that continued use of weak batteries can lead to malfunction of the camera.
Replace the batteries with new ones as soon as possible after signs of low
power appear
• Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
. Operating Environment
• Operating Temperature: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture or dust
– Near an air conditioner or in other areas subjected to extreme temperature or
humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
143
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
. Caring for your camera
• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and
other foreign matter on the lens or flash window can interfere with proper operation
of the camera. Use a blower or other means to keep the lens and flash window free
of dirt and dust, and wipe gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Old Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
144
. Copyrights
Except for your own personal enjoyment, unauthorized use of use of snapshots or
movies of images whose rights belong to others, without the permission of the right
holder, is forbidden by copyright laws. In some cases, shooting of public
performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your
own personal enjoyment. Regardless of whether such files are purchased by you or
obtained for free, posting them on a website, a file sharing site, or any other Internet
site, or otherwise distributing them to third parties without the permission of the
copyright holder is strictly prohibited by copyright laws and international treaties. For
example, uploading or distributing on the Internet images of TV programs, live
concerts, music videos, etc. that were photographed or recorded by you may infringe
upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held
liable for use of this product in any way that infringes on the copyrights of others or
that violates copyright laws.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
Note that trademark ™ and registered trademark ® are not use within the text of this
manual.
• The SDHC logo is a trademark.
• Microsoft, Windows, Internet Explorer, and Windows Vista are registered
trademarks or trademarks of Microsoft Corporation in the United States and other
countries.
• Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc.
• MultiMediaCard is a trademark of Infineon Technologies AG of Germany, and
licensed to the MultiMediaCard Association (MMCA).
• MMCplus is a trademark of the MultiMediaCard Association.
• Adobe and Reader are trademarks or registered trademarks of Adobe Systems
Incorporated in the United States and other countries.
• YouTube, the YouTube logo, and “Broadcast Yourself” are trademarks or
registered trademarks of YouTube, LLC.
• EXILIM, and YouTube Uploader for CASIO are registered trademarks or
trademarks of CASIO COMPUTER CO., LTD.
• All other company or product names mentioned herein are registered trademarks
or trademarks of their respective companies.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
145
Any and all unauthorized commercial copying, distribution, and copying of the
bundled software over a network are prohibited.
This product contains PrKERNELv4 Real-time OS of eSOL
Co., Ltd. Copyright© 2007 eSOL Co., Ltd.
PrKERNELv4 is a registered trademark of eSOL Co., Ltd. in
Japan.
This product’s YouTube upload functionality is included under license from YouTube,
LLC. The presence of YouTube upload functionality in this product is not an
endorsement or recommendation of the product by YouTube, LLC.
Power Supply
To replace the batteries
1. Open the battery cover and remove the
current batteries.
2. Load a full set of new batteries.
• If the new batteries are a different type from the
ones you removed, use “Battery Type” (page 15)
to specify the type of the news batteries you are
loading.
Battery Precautions
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Batteries may become warm to the touch when power is low. This is normal and
does not indicate malfunction.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
146
. Storage Precautions
• Always remove the batteries from the camera when you are not using it. Leaving
batteries in the camera can cause it to discharge and go dead, which will lead to
malfunction of the camera.
• Remove batteries from the camera if you do not plan to use it for about two weeks
or more.
• Store batteries in a cool, dry place (20°C (68°F) or lower).
. Battery Handling Precautions
Misuse of batteries can cause them to leak or explode, which damages and corrodes
the area around the batteries and creates the risk of fire and personal injury. Make
sure you observe the following precautions when using batteries.
• When loading batteries, make sure their positive + and negative - ends are
facing correctly.
• Never mix new batteries with old ones.
• Never mix batteries of different brands.
• Use only the batteries that are specified for this camera.
• Never try to take batteries apart and always take care to avoid conditions where
their two ends can become connected to each other (shorting). Never expose
batteries to heat or throw them into fire.
• Dead batteries are susceptible to leakage, which can cause serious damage to
your camera. Remove batteries from the camera as soon as you notice they are
dead.
• Remove batteries from the camera if you do not plan to use it for more than two
weeks.
• The batteries that power the camera normally become warm as you use them.
• Use of these battery types is not supported.
A bare battery whose label (insulation) is partially or wholly
peeled off.
A battery whose negative - pole has a raised area or a battery
whole negative pole is not covered by a label (insulation).
A battery whose positive + pole is flat.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
147
. Alkaline Battery Life
The actual life of alkaline batteries is affected by a variety of factors, including the
battery manufacturer, the amount of time the batteries spend in storage before you
use them, temperature while you are recording, and photographic conditions. As a
rule, we recommend the use of rechargeable Ni-MH batteries, which have longer
lives than alkaline batteries.
• When using alkaline batteries, use of the camera in cold temperatures can shorten
the life of the batteries.
• The PLAY mode requires less power than the REC mode. If you experience a
problem turning on the camera in a REC mode, try switching to the PLAY mode.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
148
. Using Rechargeable Batteries
In the case of rechargeable batteries, use of one of the rechargeable Ni-MH (nickel
metal hydride) batteries (HR6) listed below is recommended.
• SANYO eneloop (SANYO Electric Co., Ltd.)
• DURACELL RECHARGEABLE (DURACELL, div of P&G Inc.)
• ENERGIZER RECHARGEABLE (Energizer Holdings, Inc.)
IMPORTANT!
• Never mix four batteries of different brands, ages, or charge levels. Doing so
creates the risk of shortened battery life and can even damage the camera.
• Batteries cannot be recharged while they are loaded in the camera.
. Refreshing Rechargeable Batteries
Batteries can start to lose their ability to retain a charge if you do not use them for a
long time or when you charge them repeatedly without allowing their current charge
to be used up completely. If this happens, you may be able to restore battery capacity
by performing the following “battery refresh” operation to fully discharge the batteries.
1. Load the chargeable batteries into the camera.
2. While holding down [MENU], press the power button. This should cause the
firmware version screen to flash on the monitor screen.
3. Leave the camera on until the batteries run out of power and the camera turns off.
• The battery refresh operation can take as long as 10 hours. The actual amount
of time required depends on battery conditions.
4. After the camera turns off, remove the batteries and charge them.
IMPORTANT!
• Performing the battery refresh operation reduces the battery charge level to almost
zero. Never load refreshed batteries into the camera without charging them first.
Though you may be able to momentarily turn on the camera while refreshed
uncharged batteries are loaded, power may suddenly fail, leaving the lens
extended, or some other misoperation may occur.
• You do not need to perform the above operation each time you charge the
batteries. Only use it if you notice that you are getting less operation between
charges. Note that you may eventually reach the point when even the above
operation will not refresh batteries. If this happens, it means that the rechargeable
batteries have reached the end of their service life and that you will need to
purchase new rechargeable batteries.
• The above notes are all based on use of a recommended type of rechargeable
Ni-MH battery.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
149
Using Household Power
You need to purchase the optionally available AC adaptor (AD-C100) in order to be
able to power the camera using a household power supply.
1. Connect the power cord to the AC adaptor.
2. Open the camera’s terminal cover and connect the AC adaptor to the
terminal marked [
].
3. Plug the power cord into a power outlet.
[
]
Power cord
Terminal
cover
AC adaptor
Power plug
. Using Power in Other Countries
• The AC adaptor is designed for operation with any power supply in the range of
100 V to 240 V AC, 50/60 Hz. Note, however, that the shape of the power cord plug
depends on each country or geographic area. Before taking the camera and AC
adaptor along on a trip, check with travel agent about the power supply
requirements in your destination(s).
• Do not connect the AC adaptor to a power supply through a voltage converter or
similar device. Doing so can lead to malfunction.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
150
. Precautions when Using the AC Adaptor
• Connecting the AC adaptor to the camera does not charge the batteries.
• Make sure that the camera is turned off before connecting or disconnecting the AC
adaptor.
• If you are connecting the AC adaptor to the camera while it has batteries loaded,
never connect or disconnect the AC adaptor while the camera is turned on.
• The AC adaptor will become warm after long use. This is normal and does not
indicate malfunction.
• Unplug the AC adaptor from the power outlet whenever you are not using it.
• When the AC adaptor is connected to the camera while the batteries are loaded,
the AC adaptor power is given priority.
• Use of the AC adaptor to power the camera is recommended when connected to a
computer.
• Never cover the AC adaptor with a blanket, etc. Doing so creates the risk of fire.
Using a Memory Card
memory card.
To replace the memory card
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly. Pull
the card out the rest of the way and then insert another
one.
• Never remove a card from the camera while the back
lamp is flashing green. Doing so can cause the image
save operation to fail and even damage the memory
card.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
151
. Using a Memory Card
• SD memory cards and SDHC memory cards have a
write protect switch. Use the switch when you need to
guard against accidentally deleting data. Note,
however, if you write protect an SD memory card you
must then turn write protection off whenever you want
to record to it, format it, or delete any of its images.
• If a memory card starts to behave abnormally during
Write enabled
Write disabled
image playback, you can restore normal operation by reformatting it (page 135).
However, it is recommended that you always take along multiple memory cards
whenever using the camera far away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.)
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
before discarding or transferring ownership of the camera.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
152
Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. Be sure to
check the requirements for the particular application you are trying to use. Note that
the values provided here are minimum requirements for running each application.
Actual requirements are greater, depending on the number of images and the sizes of
the images being handled.
0Windows
DirectX 9.0c
Hard Disk Drive Space: 65MB for installation (18MB on hard disk)
YouTube Uploader for CASIO
• Sufficient memory to run the operating system
• Computer configuration that enables playback of movies on the YouTube site
• Computer configuration that enables upload of movies to the YouTube site
Adobe Reader 8
CPU
: Pentium III Class
Memory
: At least 128MB
Hard Disk Drive Space: At least 180MB
Other
: Internet Explorer 6.0 or higher installed
For details about the minimum system requirements for each software application,
see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes
bundled with the camera.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
153
General Guide
The numbers in parentheses indicate the pages where each item is explained.
. Camera
Front
Back
cl cm cn co cp cq
123456
7
8
ck
bt
bs
br
9
bk
bl
bm
cr
[8]
bn
bo
[4]
[6]
[SET]
dk ct cs
bq
bp
[2]
Shutter button (page 20)
[ON/OFF] (Power)
(page 19)
Front lamp
Speaker
Microphone (page 57)
Flash (page 35)
Strap ring (page 11)
Memory card slot cover
(page 17)
Memory card slot
Control button
([8] [2] [4] [6])
(page 28)
[SET] button (page 28)
1
2
bo@ (Focus) button
cq
(page 46)
Lens
Zoom controller
bp
cr
3
bq
Monitor screen
Viewfinder
[EVF/LCD] button
(page 136)
cs
4
5
6
7
8
br
bs
bt
ct
dk
[MENU] button
(page 76)
9ð (Flash up) button
(page 35)
Diopter dial (page 20)
[p] (PLAY) button
Back lamp
[r] (REC) button
[DISP] button
ck
cl
Terminal cover
(page 150)
[DC IN 9V] AC adaptor
connector (page 150)
[USB/AV] port
bk
bl
cm
cn
co
cp
bm
(page 136)
bn
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
154
Monitor Screen Contents
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
ISO sensitivity (page 38)
bl
123456789
bm
bk
cr
cq
cp
Exposure compensation (page 40)
Metering mode (page 41)
sensitivity (Move Out CS, Move In CS)
speed (High-speed CS, Flash CS mode)
Date/Time (page 43)
Prerecord (Still image) Time (High-speed
CS mode) (page 51)
Flash continuous shutter (CS) images
(Flash CS mode) (page 50)
ISO sensitivity (page 38)
Aperture value (page 29)
Timestamp indicator (page 129)
Shutter speed (page 30)
Histogram (page 137)
Focal distance (Converted to 35 mm film
format.) (page 44)
bn
bo
bp
bl
bm
bn
bo
bp
bq
co
bq
br
cn
ck
cmcl btbsbr
Focus mode (page 46)
Move Out CS/Move In CS
(page 71)
Self-timer mode (page 78)
Image deterioration indicator
(page 44)
Recording mode (page 27)
Zoom disabled (page 46)
Number of recordable CS images
Remaining snapshot memory
Exposure mode (page 29)
Snapshot image size/Quality
1
2
3
4
5
bs
bt
ck
cl
cm
cn
co
cp
6
7
8
9
bk
Anti Shake (page 79)
Face Detection (page 80)
cq
cr
NOTE
• If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not
correct, the setting will turn orange when you half-press the shutter button.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
156
B
. Movie Recording
Recording mode (page 56)
Remaining movie memory capacity
(page 169)
Recording speed (high speed movie)
(pege 59)
Current movie fps indicator
Optical zoom (page 63)
YouTube (page 62)
1
2
3
123
4
5
4
6
7
8
5
6
7
8
. Snapshot Viewing
File type
1
2
3
4
5
6
7
8
9
bk
bl
bm
bn
bo
bp
bq
br
bs
bt
123 4
Protect indicator (page 101)
Snapshot image size (page 31)
Folder name/file name (page 123)
Snapshot image quality (page 85)
ISO sensitivity (page 38)
Aperture value (page 29)
Shutter speed (page 30)
Exposure compensation (page 40)
Dynamic range correction (page 85)
Metering mode (page 41)
White balance setting (page 99)
Flash (page 35)
Battery level indicator (page 14)
Recording mode
Histogram (page 137)
Exposure mode (page 29)
Focal distance (Converted to 35mm film
format.) (page 44)
5
3
bt
bs
br
6
7
8
9
bq
bp bobnbmblbk
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
157
B
. Movie Playback
File type
1
2
3
4
5
6
7
8
9
12 3
Protect indicator (page 101)
Folder name/file name (page 123)
Movie recording time (page 88)
Prerecord (Movie) (page 61)
YouTube (page 62)
4
5
6
7
Battery level indicator (page 14)
9
8
. CS Image Viewing
Current image number/number of images in
the group (page 89)
1
1
2
Playback guide (page 89)
CS speed (page 89)
2
3
4
4
3
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
158
B
Reset Initial Default Settings
The tables in this section show the initial default settings that are configured for menu
items (displayed when you press [MENU]) after you reset the camera (page 135).
Menu items depend on whether the camera is in the REC mode or PLAY mode.
• A dash (–) indicates an item whose setting is not reset or an item for which there is
no reset setting.
. REC Mode
“REC” Tab
Self-timer
Off
Review
Grid
On
Off
On
AF Assist Light
Anti Shake
On
A Camera As
Icon Help
Face Detection
Continuous AF
AE/AF Lock
Off
Flash: On
Self-timer: Off
Flash Intensity:
Off
Digital Zoom: On
MF Position: Off
Zoom Position:
Off
Off
AE Lock
Always Ask
On
Memory
Save CS Images
Digital Zoom
Quick Shutter
Off
“Quality” Tab
T
Quality
Color Filter
Sharpness
Saturation
Contrast
Off
0
Normal
(Snapshots)
Dynamic Range
Flash Intensity
Flash Assist
Off
0
0
0
Auto
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
159
“Set Up” Tab
Screen
Auto 2
0
Date Style
Language
Sleep
–
EVF
Brightness
–
1 min
Startup: Sound 1 /
Half Shutter: Sound 1 /
Shutter: Sound 1 /
Operation: Sound 1 /
=Operation:
Auto Power Off 5 min
REC/PLAY
LCD Priority
USB
Power On
Sounds
Off
Mass Storage
...////
/
=Play: ...////
Video Out
Battery Type
Startup
–
File No.
Continue
Home
Off
–
World Time
Timestamp
Adjust
Off
–
Format
–
Reset
–
. PLAY Mode
“PLAY” Tab
Images: All images /
Time: 30 min /
Interval: 3 sec /
Effect: Pattern 1
Protect
–
–
–
–
–
–
–
Rotation
Resize
Slideshow
Trimming
Copy
MOTION PRINT 9 frames
Movie Editing
White Balance
Brightness
–
–
–
–
Divide Group
Select Frame
DPOF Printing
“Set Up” Tab
• The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
B
160
When things don’t go right...
Troubleshooting
Problem
Possible Cause and Recommended Action
Power Supply
Power does not
turn on.
2)The batteries may be dead.
The camera
suddenly powers
down.
back on.
2)The batteries may be dead.
3)The camera’s protection function may have activated
because camera temperature is too high. Turn off the camera
and wait until it cools down before trying to use it again.
Power will not turn Remove the batteries from the camera and then reload them.
off. Nothing
happens when a
button is pressed.
Image Recording
r
] (REC) to enter
Image is not
1)If the camera is in the PLAY mode, press [
the REC Mode.
recorded when the
shutter button is
pressed.
2)If the flash is charging, wait until the charge operation
finishes.
3)If the message “Memory Full” appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
4)Flash is required but the flash unit is closed. Press the ð
(Flash up) to open the flash unit.
Auto Focus does
not focus properly
1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when
you compose the image.
3)The subject you are shooting may not be a type that is
4)You may be moving the camera when shooting. Try shooting
with Anti Shake or use a tripod.
5)You may be pressing the shutter button all the way without
waiting for Auto Focus. Half-press the shutter button and
allow enough time for Auto Focus to focus.
The subject is out
of focus in the
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
recorded image.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
161
Problem
Possible Cause and Recommended Action
?
The flash does not 1)If
(Flash Off) is selected as the flash mode, change to
fire.
2)If battery power is load, replace them with a full set of new
ones.
?
3)If a BEST SHOT scene that uses
(Flash Off) is selected,
Camera powers
down during Self-
timer countdown.
The batteries may be dead.
The monitor screen 1)You may be using Manual Focus and have not focused the
image is out of
focus.
´
2)You may be using
(Macro) or Á (Super Macro) for
scenery or portraits. Use Auto Focus for scenery and portrait
3)You may be trying to use Auto Focus when shooting a close-
´
up shot. Use the
(Macro) or Á (Super Macro) for close
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
?
2)You may be attempting to shoot in a dark location with
(Flash Off) selected, which can increase digital noise and
make images appear coarse. In this case, turn on flash (page
35) or use lights for illumination.
3)Flash assist or dynamic range may be enabled for snapshots,
which can cause an increase in digital noise. Use a light or
some other means to illuminate the subject.
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows
, replace
batteries (alkaline) or charge batteries (Ni-MH) as soon as
possible.
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Though available
lighting is bright,
Not enough light is reaching the subjects. Change the flash
<
mode setting to
(Flash On) for daylight synchro flash (page
in the image are
dark.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
162
Problem
Possible Cause and Recommended Action
Subjects are too
Sunlight reflected by water, sand, or snow, can cause
<
dark when shooting underexposure of images. Change the flash mode setting to
images in a
seashore or ski
area.
Digital zoom
(including HD
The digital zoom setting may be turned off. Turn on digital zoom
zoom) does not
work. The zoom
bar indicates zoom
only up to a zoom
factor of 20.
The image is out of 1)Focusing may not be possible because the subject is outside
focus during movie
recording.
the focus range. Shoot within the allowable range.
3)Continuous Auto Focus is not performed during movie
recording when optical zoom is turned on while “HD/STD” is
selected as the movie mode, regardless of the current
Continuous AF setting. You can readjust focus while movie
recording is in progress by half pressing the shutter button,
but doing so will cause noise produced by the lens operation
to be picked up in the audio recording.
4)Focus is fixed during movie recording when “HS” is selected
as the movie mode.
Playback
The color of the
playback image is
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
different from what sunlight does not shine directly into the lens.
appears on the
monitor screen
when shooting.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
edited (with
resizing, trimming,
rotation).
Note that you cannot edit the following types of snapshots.
• Snapshots created using MOTION PRINT
• CS group snapshots
• Movies
• Snapshots recorded with another camera
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
163
Problem
Other
Possible Cause and Recommended Action
The wrong date
and time are
displayed.
The date and time setting is off. Set the correct date and time
The messages on
the display are in
the wrong
The wrong display language is selected. Change the display
language.
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely. Check all
connections.
2)The wrong USB communication protocol is selected. Select
the correct USB communication protocol in accordance with
3)If the camera is not turned on, turn it on.
4)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer’s USB port.
Languageselection 1)You did not configure initial settings after purchasing the
screen appears
when the camera is
turned on.
camera or the battery may have been left with dead batteries.
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
The lens-barrel unit A lubricating agent is used to ensure that the lens operates
is dirty or looks
scratched.
smoothly. When the lens is extended, the lubricating agent can
make it appear as if the lens-barrel unit is scratched. You can
use a soft, dry cloth to wipe the lubricating agent off, if you want.
When wiping off the lens-barrel unit, wipe gently taking care you
do not twist the unit, or push it in, or pull it out. Note that the
lubricating agent is not harmful to humans.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
164
Display Messages
The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
ALERT
Battery is low.
Battery power is low.
Move Out CS or Move In CS framing could not be
performed for some reason, and so the camera cannot go
into auto record standby. Perform the framing operation
again (page 71).
Camera not in
standby.
Re-frame the image.
The image you specified with the slideshow “Images”
Cannot find the file. setting cannot be found. Change the “Images” setting (page
95) and try again.
You are attempting to save a user BEST SHOT scene in
the “SCENE” folder when the folder already contains 999
user scenes.
Cannot register any
more files.
There is something wrong with the memory card. Turn off
the camera, remove the memory card and then reload it
into the camera. If this message re-appears when you turn
the camera back on, format the memory card (page 135).
Card ERROR
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a
computer or some other storage device.
You are attempting to connect the camera to a printer while
Check connections! the camera’s USB settings are not compatible with the USB
Files could not be
saved because
battery is low.
Battery power is low, so an image file could not be saved.
The flash is disabled for a short while to protect the flash
unit after consecutive operations during Flash CS. You will
be able to resume using the flash after this message
disappears.
Flash cool down...
The flash needs to be fired by the flash unit is not open.
Press ð (Flash up) to open the flash unit.
Open the flash unit.
Flash not possible.
Battery power is too low to fire the flash. Replace or charge
the batteries as soon as possible.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
165
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 25).
Folder cannot be
created.
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
LENS ERROR
The Anti Shake unit of the camera may be malfunctioning.
If the same message appears after you turn power back on,
contact your retailer or a CASIO service center.
LENS ERROR 2
Load paper!
The printer ran out of paper while printing.
Memory is full with images you recorded and/or files saved
by editing operations. When shooting with Prerecord (Still
image), this message indicates that there is not enough
memory capacity to record all of the pre-recorded images.
Delete files you no longer need (page 25).
Memory Full
An error occurred while printing.
• The printer is turned off.
Printing Error
• The printer generated an error, etc.
Image compression could not be performed for some
reason during image data storage. Shoot the image again.
Record Error
Your camera system is corrupted. Contact your retailer or
an authorized CASIO authorized service center.
SYSTEM ERROR
The LOCK switch of the SD or SDHC memory
card loaded in the camera is in the locked
position. You cannot store images to or delete
images from a memory card that is locked.
LOCK
The card is locked.
There are no files.
There are no files in built-in memory or on the memory
card.
There are no
printing images.
Set up DPOF.
There are currently no files specified for printing. Configure
the required DPOF settings (page 108).
There is no image to The setup you are trying to save is for an image that cannot
register.
be saved as a user BEST SHOT scene.
This card is not
formatted.
The memory card loaded in the camera is not formatted.
Format the memory card (page 135).
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
166
B
This file cannot be
played.
The file you are trying to access is corrupted or is a type
that cannot be displayed by this camera.
• You attempted to copy images from built-in memory to a
memory card while there is no memory card loaded in
• You attempted to divide up a CS group while a file that is
This function cannot
be used.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
167
Number of Snapshots and Movie Recording Time
Snapshot
Built-in
SD Memory
Card (1GB)
Snapshot
Recording
Capacity
Approximate
Image File
Size
Memory
Snapshot
Recording
Capacity
Image Size
(Pixels)
Image
Quality
RAW+
(9M: 3456 2592)
Fine
Normal
Economy
Fine
19.4 MB
16.8 MB
15.8 MB
5.66 MB
3.0 MB
1
1
49
*1
x
57
61
2
9M
5
170
322
478
195
366
543
239
443
653
210
393
579
224
418
616
323
597
863
767
1224
2057
2930
5090
6908
x
(3456 2592)
Normal
Economy
Fine
10
16
6
2.02 MB
4.94 MB
2.64 MB
1.78 MB
4.04 MB
2.18 MB
1.48 MB
4.59 MB
2.46 MB
1.67 MB
4.3 MB
3:2
x
(3456 2304)
Normal
Economy
Fine
12
18
8
16:9
(3456 1944)
x
Normal
Economy
Fine
14
21
7
8M
x
(3264 2448)
Normal
Economy
Fine
13
19
7
7M
x
(3072 2304)
Normal
Economy
Fine
2.31 MB
1.57 MB
2.99 MB
1.62 MB
1.12 MB
1.26 MB
790 KB
470 KB
330 KB
190 KB
140 KB
14
20
10
20
29
25
41
69
98
5M
x
(2560 1920)
Normal
Economy
Fine
2M
x
(1600 1200)
Normal
Economy
Fine
VGA
x
(640 480)
Normal
Economy
171
232
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
168
Movies
SD Memory
Card (1GB)
Movie
Recording
Capacity
Built-in
Memory Movie
Recording
Capacity
File Size
of
1-minute
Movie
Image Quality
(Pixels) /
Movie
Mode
Approximate Data
Rate (Frame Rate)
(Audio)
HD
1280 720
x
(Monaural)
30 Megabits/second
(30 frames/second)
4 minutes
22 seconds
8 seconds
225 MB
75 MB
HD
1280 720
x
(No audio)
HD/STD
STD
x
640 480
(Monaural)
10 Megabits/second
(30 frames/second)
12 minutes
57 seconds
26 seconds
STD
x
640 480
(No audio)
210 fps
480 360
(No audio)
50 Megabits/second
(210 frames/second)
2 minutes
38 seconds
x
5 seconds
5 seconds
10 seconds
375 MB
375 MB
420 fps
50 Megabits/second
(420 frames/second)
2 minutes
38 seconds
x
224 168
(No audio)
HS
1000 fps
25 Megabits/second
(1000 frames/second)
5 minutes
14 seconds
x
224 56
187.5 MB
(No audio)
7.1 Megabits/second
(30 frames/second)
50 Megabits/second
(210 frames/second)
30-210 fps
480 360
(No audio)
18 minutes
37 seconds*2
53 MB*2
x
28 seconds*2
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
169
B
SD Memory
Card
(Maximum
recording
time per
Built-in
Memory
Movie
Recording
Capacity
Movie
Mode
Image Quality
(Pixels) / (Audio)
Maximum
File Size
Approximate Data
Rate (Frame Rate)
recording)
YouTube (HS210 fps)
480 360 (No audio)
50 Megabits/second
(210 frames/second)
5 seconds
5 seconds
10 seconds
15 seconds
15 seconds
18 seconds
x
YouTube (HS420 fps)
50 Megabits/second
(420 frames/second)
x
224 168 (No audio)
YouTube (HS1000 fps)
25 Megabits/second
(1000 frames/second)
Maximum
Movie
x
224 80 (No audio)
YouTube
Capture
Mode*3
Size:
100MB
(or 10
7.1 Megabits/second
(30 frames/second)
50 Megabits/second
(210 frames/second)
YouTube
1 minute
(HS30-210 fps)
37 seconds*2
26 seconds
54 seconds*2
x
480 360 (No audio)
minutes)
YouTube (STD)
x
640 480 (Monaural)
10 Megabits/second
(30 frames/second)
1 minute
20 seconds
YouTube (STD)
x
640 480 (No audio)
• Snapshot and movie recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• The above values are based on use of a PRO HIGH SPEED SD memory card
(Panasonic Corporation). The number of images you can save depends on the type of
memory card you are using.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 1GB.
• The time it takes to play back a high-speed movie will be different from the time it takes to
record it. If you record a 210 fps high-speed movie for 10 seconds, for example, it will
take 70 seconds to play it back.
• Each movie can be up to 10 minutes long. Movie recording stops automatically after
10 minutes of recording.
x
*1 RAW+ is the total file size of the RAW file and 9M (3456 2592) JPEG file. The image
quality setting applies to the JPEG file only.
*2 Recordable time when the entire movie is recorded at 30 fps. Recording time is shorter
if the 30 fps frame rate is switched to 210 fps during recording.
*3 Shooting with “YouTube” is not possible while “HD” is selected as the movie mode.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
B
170
Specifications
File Format
Snapshots:RAW (DNG), JPEG (Exif Version 2.2); DCF 1.0
standard; DPOF compliant
* DNG file format is one type of RAW image file, and it is
recommended by Adobe Systems for use as a standard
image file format.
Movies:Motion JPEG AVI, IMA-ADPCM audio (monaural)
Recording Media
Built-in Memory (Image Storage Area: 31.9MB)
SD/SDHC/MMC/MMCplus
x
x
Recorded Image Sizes Snapshot: RAW, 9M (3456 2592), 3:2 (3456 2304),
x
x
16:9 (3456 1944), 8M (3264 2448),
7M (3072 2304), 5M (2560 1920),
2M (1600 1200), VGA (640 480)
x
x
x
x
x
x
Movies: HD (1280 720 30 fps), HS210 (480 360 210 fps),
x
HS420 (224 168 420 fps),
HS1000 (224 56 1000 fps),
HS30-210 (480 360 30-210 fps switchable),
STD (640 480 30 fps)
x
x
x
Delete
1 file; all files
CS group, Individual images within a CS group
(with memory protection feature)
Effective Pixels
Imaging Element
9.10 Megapixels
Size: 1/2.3-inch square pixel high-speed CMOS
Total Pixels: 10.29 Megapixels
Lens/Focal Distance
(Snapshot)
F2.8 (W) to 4.5 (T) f= 4.6 to 92.0 mm
(equivalent to 26 to 520 mm in 35 mm format)
14 lenses in 11 groups, including aspherical lens.
Zoom
20X optical zoom, 4X digital zoom (80X in combination with
optical zoom)
108X maximum HD Zoom (in combination with optical zoom,
VGA size)
Focusing
Contrast Detection Auto Focus
• Focus Modes:
Auto Focus, Macro Focus, Super Macro Focus, Manual Focus
• AF Area:
Spot, Free, Tracking; with AF assist lamp
9
9
) (Wide Angle)
Approximate Focus
Range (Snapshot)
(From Lens Surface)
Auto Focus: 40 cm to
(1.3' to
Macro Focus: 12 cm to 50 cm (4.7" to 19.7") (Wide Angle)
Super Macro Focus: 1 cm to 12 cm (0.4" to 4.7")
9
9
) (Wide Angle), 1 cm to
Manual Focus: 12 cm to
(4.7" to
9
) (when the zoom focal distance is equivalent to
9
(0.4" to
57 mm in 35 mm film format)
* Range is affected by optical zoom.
Metering
Multi-pattern, center weighted, and spot by imaging element
Exposure Control
Program AE, Aperture Priority AE, Shutter Speed Priority AE,
Manual Exposure
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
171
B
Exposure
–2.0 EV to +2.0 EV (in 1/3EV steps)
Compensation
Shutter
CMOS electronic shutter, mechanical shutter
Shutter Speed
Snapshot (Auto): 1 to 1/2000 second
Snapshot (Aperture Priority AE): 1 to 1/2000 second
Snapshot (Shutter Speed Priority AE): 30 to 1/2000 second
Snapshot (Manual Exposure): 30 to 1/2000 second
* May differ due to the camera setup.
* 1/40000-second shutter speed is possible only with High-
speed Continuous Shutter, shutter speed priority AE or
manual exposure.
Aperture Value
White Balance
F2.8 (W) to F7.9 (W); aperture changed by optical zoom or
recording mode
Auto, Daylight, Overcast, Shade, Day White Fluorescent,
Daylight Fluorescent, Tungsten, Manual WB
Sensitivity (Standard Snapshots:Auto, ISO 100, ISO 200, ISO 400, ISO 800,
Output Sensitivity)
ISO 1600 equivalent
Movies:Auto (Hi-Speed Movie when Manual Exposure mode:
ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600)
Self-timer
Approximate Trigger Times: 10 seconds, 2 seconds, Triple Self-
timer
(Trigger time setting depends on CS mode being used.)
Flash Modes
Auto, Off, On, Red-eye reduction
Flash Range (ISO
Sensitivity: Auto)
Normal:
0.4 m to 7.0 m (1.3' to 23.0') (Wide Angle)
1.3 m to 4.4 m (4.3' to 14.4') (Telephoto)
Flash Continuous Shutter (5 flash CS images):
0.6 m to 2.3 m (2.0' to 7.5') (Wide Angle)
1.3 m to 1.4 m (4.3' to 4.6') (Telephoto)
* Range is affected by optical zoom.
Flash Intensity
Adjustment
–2.0 EV to +2.0 EV (in 1/3EV steps)
Flash Charging Time Approximately 5 seconds maximum
Movie Recording
18 lx (HD/STD movie)
Minimum Illumination
Recording
Snapshot, High Speed Continuous shutter, Prerecord (still
image), Flash Continuous shutter, BEST SHOT, Face detection,
High Speed Movie (no audio), HD Movie, STD Movie, Prerecord
(Movie), YouTube Capture Mode, CMOS shift image
stabilization
Monitor Screen
Viewfinder
3.0-inch TFT color LCD (Super Clear LCD)
230,400 (960 240) dots
x
LCD monitor/Electronic View Finder
(0.2-inch, Equal to 201,600 dots)
Timekeeping
Functions
Built-in quartz digital clock
Date and Time: Recorded with image data
Auto Calendar: To 2049
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
172
B
World Time
162 cities in 32 time zones
City name, date, time, summer time
Input/Output
Terminals
USB/AV port, Hi-Speed USB compatible
AC adaptor connector (DC-IN)
Microphone
Speaker
Monaural
Monaural
x
Power Requirements AA-size alkaline battery
4
x
AA-size rechargeable Ni-MH battery
4
AC adaptor (AD-C100) (optional accessory)
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
B
173
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Number of Shots
(CIPA)
(Operating Time)*1
Continuous
Playback
(Snapshots)*2
Approximate
continuous movie
recording time
Operation
ALKALINE BATTERY LR6
5 hours
20 minutes
2 hours
10 minutes
Panasonic
230 shots
210 shots
DURACELL
ULTRA
5 hours
20 minutes
2 hours
RECHARGEABLE Ni-MH BATTERY
6 hours
20 minutes
3 hours
50 minutes
eneloop
400 shots
8 hours
20 minutes
4 hours
50 minutes
ENERGIZER
430 shots
440 shots
DURACELL
RECHARGEABLE
5 hours
40 minutes
4 hours
20 minutes
• The above guidelines are based on the following battery types:
ALKALINE BATTERY LR6
Panasonic LR6 (XW) (Panasonic Corporation)
DURACELL ULTRA (MX1500) (DURACELL,div of P&G Inc.)
RECHARGEABLE Ni-MH BATTERY
SANYO eneloop (HR-3UTG) (SANYO Electric Co.,Ltd.)
Capacity: Min.1900 mAh
ENERGIZER RECHARGEABLE (NH15-2500) (Energizer Holdings,Inc.)
Capacity: 2500 mAh
DURACELL RECHARGEABLE (DC1500) (DURACELL,div of P&G Inc.)
Capacity: 2650 mAh
* Battery life varies with brand.
• Recording Medium: 1GB SD memory card (PRO HIGH SPEED (Panasonic
Corporation))
• Measurement Conditions
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
B
174
*1 Approximate number of shots (CIPA) (Operating Time)
In accordance with CIPA standards
Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide and
full telephoto every 30 seconds, during which two images are shot with flash; power
turned off and back on every time 10 images are shot.
*2 Approximate playback time
Standard temperature (23°C (73°F)), one-image scroll approximately every 10 seconds
• The above values are based on a set of new batteries.
• Frequency of flash, zoom, High-speed Continuous Shutter, and Auto Focus usage,
and the time the camera is on greatly affects recording time and number of shots
values.
Power Consumption
Dimensions
6.0 V DC, Approximately 9.0 W
x
x
122.6 (W) 81.4 (H) 84.5 (D) mm
x
x
(4.8" (W) 3.2" (H) 3.3" (D))
Weight
Approximately 483 g (17.0 oz)
(excluding battery and bundled accessories)
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
175
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
M10
MA0810-B
Download from Www.Somanuals.com. All Manuals Search And Download.
|