Casio Digital Camera EX ZR10 User Manual

E
Digital Camera  
User’s Guide  
Thank you for purchasing this CASIO product.  
• Before using it, be sure to read the precautions contained in this User’s Guide.  
• Keep the User’s Guide in a safe place for future reference.  
• For the most up-to-date information about this product, visit the official EXILIM  
Website at http://www.exilim.com/  
To go to “Getting the Most Out of Dynamic Photo” click here!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Read this first!  
• The contents of this manual, the bundled Quick Start Guide, and the bundled High  
Speed Continuous Shutter/High Speed Movie Shooting Guide are subject to  
change without notice.  
• The contents of this manual have been checked at each step of the production  
process. Feel free to contact us if you notice anything that is questionable,  
erroneous, etc.  
• Any copying of the contents of this User’s Guide, either in part or its entirety, is  
forbidden. Except for your own personal use, any other use of the contents of this  
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden  
under copyright laws.  
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost  
profits suffered by you or any third party due to the use or malfunction of this  
product.  
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost  
profits, or claims by third parties arising out of the use of Photo Transport, or  
YouTube Uploader for CASIO.  
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost  
profits caused by loss of memory contents due to malfunction, repair, or any other  
reason.  
• Note that the example screens and product illustrations shown in this User’s Guide  
may differ somewhat from the screens and configuration of the actual camera.  
LCD Panel  
The liquid crystal panel of the monitor screen uses high-precision technology that  
provides a pixel yield in excess of 99.99%. This means that some very small number  
of pixels may not light or may remain lit at all times. This is due to the characteristics  
of the liquid crystal panel, and does not indicate malfunction.  
Take test shots  
Before shooting your final image, shoot a test shot to ensure that the camera is  
recording correctly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
 
Contents  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Shooting with High Speed Night Scene  
Expanding the Zoom Range to  
Configuring the Camera to Help You Better Time Your Shots  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
General Guide  
The numbers in parentheses indicate the pages where each item is explained.  
. Camera  
Front  
Back  
bk bl bm 7 bn  
1234 567  
bo  
bp  
cl ck bt bs br bq  
9
8
Zoom controller  
Control button  
([8] [2] [4] [6])  
[MENU] button  
(page 81)  
[p] (PLAY) button  
(pages 23, 28)  
[SET] button (page 33)  
[r] (REC) button  
(pages 23, 25)  
Monitor screen  
1
bkÕ(Continuous  
bq  
Shutter button (page 25)  
Flash (page 40)  
[ON/OFF] (Power)  
(page 23)  
Microphones (page 55)  
[AUTO] button (page 25)  
Strap holes (page 2)  
Front lamp  
Shutter) (page 46)  
Back lamp  
2
3
4
bl  
bm  
bn  
[0] (Movie) button  
(page 54)  
Terminal cover  
br  
bs  
5
6
7
8
bt  
ck  
[USB/AV] port  
[HDMI OUT] HDMI  
output (Mini) (page 107)  
bo  
bp  
(pages 86, 89)  
Lens  
9
cl  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
 
Bottom  
Battery/memory card slots (pages 17, 21, 170, 172)  
Tripod hole  
Use this hole when attaching to a tripod.  
Speaker  
cm  
cn  
co  
cocn  
cm  
. Charger Unit  
+7-Contacts  
[CHARGE] Lamp  
AC jack  
1
2
3
2 1  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Monitor Screen Contents  
The monitor screen uses various indicators, icons, and values to keep you informed  
of the camera’s status.  
• The sample screens in this section are intended to show you the locations of all the  
indicators and figures that can appear on the monitor screen in various modes.  
They do not represent screens that actually appear on the camera.  
. Snapshot Recording  
Remaining snapshot memory capacity  
(pages 49, 185)  
7
123456789  
bk  
bl  
bm  
Number of recordable CS images  
(pages 46, 49)  
Snapshot image size/Quality (pages 34, 94)  
ISO sensitivity (page 37)  
White balance setting (page 38)  
Exposure compensation (page 39)  
Flash (page 40)  
8
cn  
cm  
cl  
ck  
9
bk  
bl  
bm  
bn  
bo  
bp  
bq  
bn  
btbsbrbqbp  
bo  
BEST SHOT (page 63)  
Date/Time (pages 19, 155)  
Movie quality (FHD/STD movie)  
(pages 54, 57)/Recording speed  
(high speed movie) (page 57)  
Focus frame (pages 26, 88)  
Timestamp indicator (page 154)  
Battery level indicator (page 18)  
Histogram (page 161)  
Focus mode (page 83)  
Metering mode (page 95)  
Continuous Shutter mode  
(page 46)  
1
2
3
br  
bs  
bt  
ck  
cl  
cm  
cn  
Self-timer mode (page 86)  
4
5
Image deterioration indicator  
(page 43)  
Recording mode (page 25)  
Zoom (SR) indicator (page 44)  
Anti Shake (page 87)  
Face Detection (page 89)  
6
NOTE  
• The semi-transparent gray frame on the monitor screen indicates the area that is  
recorded when shooting a movie. The area within the frame is recorded for a  
movie.  
• If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not  
correct, the setting will turn orange when you half-press the shutter button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
. Movie Recording  
Recording mode (page 54)  
1
2
3
4
5
6
1 2 3  
Audio recording disabled (page 57)  
Remaining movie memory capacity (page 54)  
Movie recording time (page 54)  
Movie recording in progress (page 54)  
Movie quality (FHD/STD movie) (pages 54, 57)/  
Recording speed (high speed movie) (page 57)  
Battery level indicator (page 18)  
4
5
6
7
7
. Snapshot Viewing  
File type  
1
2
3
4
5
6
7
8
9
bk  
bl  
bm  
bn  
bo  
bp  
bq  
br  
12 3 4  
Protect indicator (page 116)  
Snapshot image size (page 34)  
Folder name/file name (page 148)  
Snapshot image quality (page 94)  
ISO sensitivity (page 37)  
Aperture value  
5
br  
bq  
bp  
6
7
8
9
Shutter speed  
Date/time (page 155)  
Exposure compensation (page 39)  
Metering mode (page 95)  
White balance setting (page 114)  
Flash (page 40)  
Battery level indicator (page 18)  
Continuous Shutter mode (page 46)  
Histogram (page 161)  
bo bnbmblbk  
Recording mode (page 25)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
   
. Movie Playback  
No audio data available  
File type  
1
2
3
4
5
6
7
8
9
123 4  
Protect indicator (page 116)  
Folder name/file name (page 148)  
Movie recording time (page 97)  
Movie quality/speed (pages 54, 57, 57)  
YouTube (page 61)  
5
6
7
Date/time (page 155)  
Battery level indicator (page 18)  
9
8
. CS Image Viewing  
Current image number/number of images in the  
group (page 99)  
1
1
2
CS group icon (page 99)  
Playback guide (page 99)  
CS speed (page 99)  
2
3
4
4
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
B
 
Quick Start Basics  
What is a digital camera?  
A digital camera stores images on a memory card, so you can record and  
delete them a countless number of times.  
Record  
Delete  
Play  
You can use the images you record in a variety of different ways.  
Store images on your  
computer.  
Print images.  
Attach images to e-mail.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
   
What you can do with your CASIO camera  
Your CASIO camera is packed with a powerful selection of features and functions to  
make recording of digital images easier, including the following four main functions.  
HDR Art  
An HDR Art feature combines different parts of a burst  
of images shot with different exposures into a final  
image and performs high-precision image analysis to  
produce final images that are true works of art.  
*See page 71 for more information.  
High Speed CS/Prerecord CS  
Now you can shoot up to 30 continuous high-resolution  
images at the amazing speed of 40 images per second  
(maximum). Prerecord CS pre-records images to  
ensure you are almost never too late with the shutter  
button.  
*See page 46 for more information.  
High Speed Movie  
Movies can be recorded at up to 480 frames per  
second. This makes it possible to clearly view  
phenomena that are invisible to the human eye, in  
slow motion.  
*See page 57 for more information.  
FHD Movie Recording  
You can record movies in high-quality FHD.  
x
(1920 1080 pixels 30 fps)  
x
1920 1080 pixels  
*See page 57 for more information.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C
15  
 
First, charge the battery prior to use.  
Note that the battery of a newly purchased camera is not charged. Perform the steps  
under “To charge the battery” to bring the battery to a full charge.  
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-110)  
for power. Never try to use any other type of battery.  
To charge the battery  
+
1. Aligning the positive  
and  
-
negative terminals of the battery  
with those of the charger unit, load  
the battery into the charger unit.  
2. Plug the charger unit into a  
[CHARGE] lamp  
household power outlet.  
About 180 minutes are required to  
reach full charge. The [CHARGE]  
lamp will go out when charging is  
complete. Unplug the power cord  
from the power outlet and then  
remove the battery from the charger.  
Lamp Status  
Description  
Lit Red  
Charging  
Abnormal ambient temperature, charger problem, or  
battery problem (page 170)  
Flashing Red  
Off  
Charging complete  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
     
Other Charging Precautions  
• Use the special charger (BC-110L) to charge the special lithium ion battery (NP-  
110). Never use any other type of charger device. Attempting to use a different  
charger can result in unexpected accident.  
• A battery that is still warm due to normal use may not charge fully. Give the battery  
time to cool before charging it.  
• A battery discharges slightly even when it is not loaded in the camera. Because of  
this, it is recommended that you charge the battery immediately before you need to  
use it.  
• Charging the camera’s battery may cause interference with TV and radio reception.  
If this happens, plug the charger into an outlet that is further away from the TV or  
radio.  
• Actual charging time depends on current battery capacity and charging conditions.  
To load the battery  
1. Open the battery cover.  
Slide the battery cover slider towards OPEN  
and then open it as indicated by the arrows in  
the illustration.  
2. Load the battery.  
Stopper  
With the EXILIM logo on the  
battery facing upwards (in the  
direction of the monitor screen),  
hold the stopper next to the  
battery in the direction indicated  
by the arrow as you slide the  
battery into the camera. Press the  
battery in until the stopper  
Battery contacts  
secures it in place.  
EXILIM logo  
Back  
Front  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
   
3. Close the battery cover.  
Close the battery cover and then shift the  
slider towards LOCK.  
• For information about how to replace the  
Checking Remaining Battery Power  
As battery power is consumed, a battery indicator on the monitor screen indicates  
remaining power as shown below.  
Remaining Power  
Battery Indicator  
Indicator Color  
High  
Low  
*
*
*
Cyan  
*
Amber * Red  
*
Red  
indicates battery power is low. Charge the battery as soon as possible.  
Recording is not possible when is indicated. Charge the battery immediately.  
• The level shown by the battery indicator may change when you switch between the  
REC mode and PLAY mode.  
• Leaving the camera for about 30 days with no power supplied while the battery is  
dead will cause its date and time settings to be cleared. A message telling you to  
configure time and date settings will appear the next time you turn on the camera  
after restoring power. When this happens, configure date and time settings (page  
155).  
• See page 190 for information about battery life and number of shots.  
Battery Power Conservation Tips  
• When you do not need to use the flash, select ?(Flash Off) for the flash setting  
• Enable the Auto Power Off and the Sleep features to protect against wasting  
battery power when you forget to turn off the camera (pages 156, 157).  
• Select “Off” for “Continuous AF” (page 90).  
• Avoid unnecessary optical zoom operations.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
   
Configuring Basic Settings the First Time You Turn On the  
Camera  
The first time you load a battery into the camera, a screen appears for configuring the  
display language, date, and time settings. Failure to set the date and time correctly  
will cause the wrong date and time data to be recorded with images.  
IMPORTANT!  
• A screen for language selection will not appear in step 2 of the procedure below if  
you purchased a camera intended for the Japanese market. To change the display  
language from Japanese in this case, use the procedure under “Specifying the  
Display Language (Language)” (page 156). Note that a version of this manual in  
the language you select may not be included with a camera intended for the  
Japanese market.  
• Camera models sold in certain geographic areas may not support display language  
selection.  
1. Press [ON/OFF] (Power) to turn on  
[ON/OFF] (Power)  
[0] (Movie)  
the camera.  
2. Use [8], [2], [4], and [6] to select  
the language you want and then  
press [SET].  
3. Use [8] and [2] to select a date style and then press [SET].  
Example: July 10, 2012  
YY/MM/DD *12/7/10  
DD/MM/YY *10/7/12  
MM/DD/YY *7/10/12  
4. Set the date and the time.  
Use [4] and [6] to select the setting you want to  
change and then use [8] and [2] to change it.  
To switch between 12-hour and 24-hour format, press  
[0] (Movie).  
5. After setting the date and time, use [4] and [6]  
to select “Apply” and then press [SET].  
If you make a mistake configuring display language, date, or time settings with the  
above procedure, refer to the following pages for information about how to correct  
the settings.  
– Display language: Page 156  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
   
NOTE  
• Each country controls its local time offset and the use of summer time, and so they  
are subject to change.  
• Removing the battery from the camera too soon after configuring time and date  
settings for the first time can cause the settings to be reset to their factory defaults.  
Do not remove the battery for at least 24 hours after configuring settings.  
Preparing a Memory Card  
Though the camera has built-in memory that can be used to store images and  
movies, you probably will want to purchase a commercially available memory card for  
greater capacity. The camera does not come with a memory card. Images recorded  
while a memory card is loaded are saved to the memory card. When no memory card  
is loaded, images are saved to built-in memory.  
• For information about memory card capacities, see page 185.  
Supported Memory Cards  
– SD Memory Card  
– SDHC Memory Card  
– SDXC Memory Card  
Use one of the above types of memory card.  
• Use only SD cards that are compliant with the SD Card Association specification.  
• This model does not support use of an Eye-Fi card.  
. Memory Card Handling Precautions  
Certain types of cards can slow down processing speeds, and even can make it  
impossible to store High Quality movies correctly. Also, use of certain types of  
memory cards slows down data transfer and increases the time it takes to record  
movie data, which can result in movie frames being dropped. The Yindicator on the  
monitor screen turns yellow to indicate that frames are being dropped. In order to  
avoid problems such as these, use of an Ultra High Speed Type SD memory card is  
recommended. Note, however that CASIO makes no guarantees about the operation  
of any Ultra High Speed Type SD memory card used with this camera.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
     
To load a memory card  
1. Press [ON/OFF] (Power) to turn off  
the camera and then open the  
battery cover.  
Slide the battery cover slider towards  
OPEN and then open it as indicated by  
the arrows in the illustration.  
2. Load a memory card.  
Positioning the memory card so its front  
is facing upwards (towards the monitor  
screen side of the camera), slide it into  
the card slot all the way in until you hear  
it click securely into place.  
Front  
Front  
Back  
3. Close the battery cover.  
Close the battery cover and then shift the  
slider towards LOCK.  
• For information about how to replace  
the memory card, see page 172.  
IMPORTANT!  
• Never insert anything besides a supported memory card (page 20) into the memory  
card slot.  
• Should water or any foreign object ever get into the card slot, immediately turn off  
the camera, remove the battery, and contact your retailer or nearest CASIO  
authorized service center.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
To format (initialize) a new memory card  
You need to format a new memory card before using it for the first time.  
1. Turn on the camera and press [MENU].  
2. On the “Set Up” tab, select “Format” and then press [6].  
3. Use [8] and [2] to select “Format” and then press [SET].  
IMPORTANT!  
• Formatting a memory card that already has snapshots or other files on it, will delete  
its contents. Normally you do not need to format a memory card again. However, if  
storing to a card has slowed down or if you notice any other abnormality, re-format  
the card.  
• Be sure to use the camera to format a memory card. Formatting a memory card on  
a computer and then using it in the camera can slow down data processing by the  
camera. In the case of an SD, SDHC, or SDXC memory card, formatting on a  
computer can result in non-conformity with the SD format, causing problems with  
compatibility, operation, etc.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
 
Turning the Camera On and Off  
To turn power on  
[ON/OFF] (Power)  
To turn on  
Press [ON/OFF] (Power) or  
power and enter [r] (REC).  
the REC mode  
To turn on  
• The back lamp will light green  
momentarily and the lens will extend  
out of the camera (page 25).  
Press [p] (PLAY).  
Back lamp  
power and enter • The back lamp will light green  
the PLAY mode  
momentarily and an image currently  
stored in camera memory will  
appear on the monitor screen  
(page 28).  
• Take care to ensure that nothing is restricting or  
coming into contact with the lens as it extends.  
Holding the lens with your hand so it cannot extend  
creates the risk of malfunction.  
• Pressing [p] (PLAY) while in the REC mode  
switches to the PLAY mode. The lens retracts about  
10 seconds after switching modes.  
[p] (PLAY)  
[r] (REC)  
• The Sleep function or Auto Power Off (pages 156, 157) will turn off power  
automatically if you do not perform any operation for a preset amount of time.  
To turn off the camera  
Press [ON/OFF] (Power).  
• You can configure the camera so power does not turn on when you press [r]  
(REC) or [p] (PLAY). You also can configure the camera to turn off when you  
press [r] (REC) or [p] (PLAY) (page 157).  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
     
Holding the Camera Correctly  
Your images will not come out  
Horizontal  
Vertical  
clearly if you move the camera  
when you press the shutter  
button. When pressing the  
shutter button, be sure to hold  
the camera as shown in the  
illustration, and keep it still by  
pressing your arms firmly  
against your sides as you shoot.  
Holding the camera still,  
carefully press the shutter button  
and take care to avoid all  
Hold the camera so the flash is above the lens.  
movement as the shutter  
releases and for a few moments after it releases. This is especially important when  
available lighting is low, which slows down the shutter speed.  
NOTE  
• Take care that your fingers and the strap do not  
cover any of the areas indicated in the illustration.  
Flash  
Front lamp  
• To protect against accidentally dropping the  
camera, attach the wrist strap and make sure it is  
around your fingers or wrist while you are operating  
the camera.  
• Never swing the camera around by its strap.  
• The supplied strap is intended for use with this  
camera only. Never use it for any other purpose.  
• When the “Auto Rotate” setting is turned on, the  
camera will detect whether it is being held vertically  
or horizontally when a snapshot image is shot.  
Lens  
When you display an image shot with the camera held vertically, the image is  
rotated automatically 90 degrees when displayed on the monitor screen (page  
151).  
IMPORTANT!  
• Take care to ensure that your fingers are not blocking or  
are not too close to the flash. Fingers can cause unwanted  
shadows when using the flash.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
 
To shoot a snapshot  
Selecting an Auto Recording Mode  
You can select one of two auto recording modes (Auto or Premium Auto) according to  
your digital imaging needs.  
This is the standard Auto recording mode.  
• It provides faster operation than Premium Auto recording.  
R
Ÿ
Auto  
With Premium Auto recording, the camera automatically  
determines whether you are shooting a subject or scenery,  
and other conditions. Premium Auto recording delivers higher  
image quality than standard Auto recording.  
• Premium Auto recording takes longer to process image data  
after it is shot than Auto recording.  
Premium Auto  
• It also requires more power (and runs down the battery  
quicker) than Auto.  
1. Press [r] (REC) to turn on the camera.  
The camera will enter the REC mode.  
2. Use [AUTO] to select Auto recording mode.  
Each press of [AUTO] toggles between Auto (r) and Premium Auto (Ÿ).  
Auto recording mode icon  
[
]
AUTO  
Monitor screen  
Shutter button  
[r] (REC)  
Remaining Snapshot Memory  
Capacity (page 185)  
• Selecting the “Auto” or “Premium Auto” BEST SHOT scene will change the  
current auto recording setting accordingly (page 64).  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
     
To shoot a snapshot  
1. Point the camera at the subject.  
If you are using Premium Auto, text will appear in the  
lower right corner of the monitor screen describing the  
type of shot the camera has detected.  
• You can zoom the image, if you want.  
Appears when the  
camera detects it is  
stationary on a tripod.  
wWide Angle  
zTelephoto  
Zoom controller  
2. Half-press the shutter button to  
focus the image.  
Back lamp  
When focus is complete, the camera  
will beep, the back lamp will light green,  
and the focus frame will turn green.  
Focus frame  
When you half-press the shutter button, the  
camera automatically adjusts exposure and  
focuses on the subject it is currently pointed at.  
Mastering how much pressure is required for a  
half-press and a full-press of the shutter button  
is an important technique for good-looking  
images.  
Half-press  
Press lightly  
until the  
button stops.  
Beep, beep (Image is in focus.)  
3. Continuing to keep the camera still,  
press the shutter button the rest of  
the way down.  
Full-press  
This records the snapshot.  
Snap (Image is recorded.)  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
     
Recording a Movie  
[0] (Movie)  
Press [0] (Movie) to start movie recording. Press [0] (Movie)  
again to stop movie recording. See the following pages for  
details.  
Standard movie (STD movie): page 54  
High-definition movie (FHD movie): page 57  
High speed movie (HS movie): page 57  
. If the image does not focus...  
If the focus frame stays red and the back lamp is flashing green, it means that the  
image is not in focus (because the subject is too close, etc.). Re-point the camera at  
the subject and try to focus again.  
. Shooting with Auto  
If the subject is not in the center of the frame...  
“Focus lock” (page 85) is the name of a technique you can use when you want to  
shoot an image in which the subject to be focused on is not within the focus frame in  
the center of the screen.  
To track the movement of a moving subject  
Half-press the shutter button to follow and focus automatically on a moving subject.  
See “ËTracking” (page 88) for more information.  
. Shooting with Premium Auto  
• In addition to shutter speed, aperture, and ISO sensitivity, the camera  
automatically executes the following operation as required when shooting with  
Premium Auto.  
– Auto Focus is normally performed until you half-press the shutter button.  
– Intelligent AF (Page 88)  
– Face Detection (Page 89)  
• Shooting with Premium Auto can cause vibration and noise to occur due to lens  
operation. This does not indicate malfunction.  
• In some cases, Premium Auto may not be able to interpret the shooting  
environment correctly. If this happens, shoot with standard Auto.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Viewing Snapshots  
Use the following procedure to view snapshots on the camera’s monitor screen.  
• For information about how to play back movies, see page 97.  
• For information about images recorded using continuous shutter (CS), see page  
1. Press [p] (PLAY) to enter the  
PLAY mode.  
• This will display one of the snapshots  
currently stored in memory.  
• Information about the displayed  
snapshot also is included (page 12).  
• You also can clear the information to  
[p] (PLAY)  
view only the snapshot (page 161).  
• You can zoom in on the image by  
sliding the zoom controller towards z(page 104). If you are recording a  
snapshot that is very important to you, it is recommended that you zoom the  
image and check its details after recording it.  
2. Use [4] and [6] to scroll between images.  
• Holding down either button scrolls at high speed.  
[6]  
[6]  
[4]  
[4]  
NOTE  
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is  
displayed will switch directly to the REC mode.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
   
Deleting Snapshots and Movies  
If memory becomes full, you can delete snapshots and movies you no longer need in  
order to free up storage and record more images.  
IMPORTANT!  
• Remember that a file (image) delete operation cannot be undone.  
• For information about images recorded using continuous shutter (CS), see page  
To delete a single file  
1. Press [p] (PLAY) to enter the PLAY mode and then  
press [2] (  
).  
2. Use [4] and [6] to scroll through the files until the one  
you want to delete is displayed.  
3. Use [8] and [2] to select “Delete” and then press [SET].  
• To delete other files, repeat steps 2 and 3.  
• To exit the delete operation, press [MENU].  
• If a CS group (page 99) is displayed when you perform the above procedure,  
all of the images in the currently displayed CS group will be deleted.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
     
To delete specific files  
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] (  
).  
2. Use [8] and [2] to select “Delete Files” and then press [SET].  
• This displays a file selection screen.  
3. Use [8], [2], [4], and [6] to move the selection boundary to the file  
you want to delete, and then press [SET].  
• This will select the check box of the currently selected file.  
4. Repeat step 3 to select other files, if you want. After you are finished  
selecting files, press [MENU].  
5. Use [8] and [2] to select “Yes” and then press [SET].  
• This deletes the files you selected.  
• To cancel the delete operation, select “No” in step 5 and then press [SET].  
To delete all files  
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] (  
2. Use [8] and [2] to select “Delete All Files” and then press [SET].  
).  
3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files.  
This will cause the message “There are no files” to appear.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
   
Snapshot Shooting Precautions  
Operation  
• Never open the battery cover while the back lamp is flashing green. Doing so can  
result in the image you just shot being saved incorrectly, damage to other images  
stored in memory, malfunction of the camera, etc.  
• If unwanted light is shining directly onto the lens, shade the lens with your hand.  
Monitor Screen when Shooting Snapshots  
• Subject brightness conditions can cause monitor screen response to slow and can  
cause digital noise in the monitor screen image.  
• The image that appears on the monitor screen is for image composition. The actual  
image will be recorded at the quality set for the image quality setting (page 94).  
Shooting Indoors under Fluorescent Lighting  
• Minute flickering of fluorescent lighting can affect the brightness or color of an  
image.  
Other Precautions  
• The slower the shutter speed, the greater the possibility that noticeable noise will  
be generated in an image. Because of this, the camera automatically performs a  
noise reduction at slow shutter speeds. The noise reduction process causes it to  
take longer to record images at lower shutter speeds. The shutter speeds for which  
noise reduction is performed depend on the camera setup and shooting conditions.  
• A noise reduction process is performed when ISO sensitivity is set to a high value.  
This can cause the camera to take relatively longer to be ready to shoot again after  
you press the shutter button. Do not perform any key operation while the image  
recording operation is in progress.  
• Due to the characteristics of the imaging element used by the camera, very fast  
moving objects in an image may appear distorted.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
 
Auto Focus Restrictions  
• Any of the following can make proper focus impossible.  
– Solid color wall or other very low contrast subject  
– Strongly back lit subject  
– Very shiny subject  
– Blinds or other subject with a repeating horizontal pattern  
– Multiple subjects at varying distances from the camera  
– Subject in a dark location  
– Subject that is too far away for light from the AF assist light to reach  
– Camera movement while shooting  
– Fast-moving subject  
– Subjects outside the focus range of the camera  
• If you cannot focus properly, try using focus lock (page 85) or Manual Focus (page  
83).  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
   
Snapshot Tutorial  
Using the Control Panel  
The control panel can be used to configure camera settings.  
1. In the REC mode, press [SET].  
[8] [2] [4] [6]  
[SET]  
2. Use [8] and [2] to select the setting you want to change.  
This will select one of the control panel icons and display its settings.*1  
Image size/Quality*2 (pages 34, 94)  
Control panel  
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
ISO sensitivity (page 37)  
White balance (page 38)  
EV shift (page 39)  
Not displayed in this mode  
Not displayed in this mode  
Not displayed in this mode  
Flash (page 40)  
BEST SHOT (page 63)  
*1 Items displayed in the control panel depend on the recording mode.  
*2 Image quality cannot be changed using the control panel.  
3. Use [4] and [6] to change the setting.  
4. If you want to configure another setting, repeat steps 2 and 3.  
5. After all of the settings are the way you want, press [SET].  
This will apply the settings and return to the REC mode.  
If you selected “BS”, the BEST SHOT scene menu will appear.  
• You can close the Control Panel by pressing [AUTO].  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
33  
     
NOTE  
• No icon is displayed for any Control Panel option (page 11) that is set to its initial  
default (reset) setting. An icon will appear only if you change the setting of the  
corresponding Control Panel option. The following are the initial defaults for Control  
Panel options.  
– ISO Sensitivity: AUTO  
– White Balance: Auto WB  
– EV Shift: ±0  
– Flash: Auto Flash  
• You also can use on-screen menus to configure settings other than those listed  
above (page 81).  
Changing the Image Size (Size)  
. Pixels  
A digital camera image is a collection of small  
dots called “pixels”. The more pixels there are  
in an image, the more detail there will be.  
However, you generally can do with fewer  
pixels when printing an image (L size)  
through a print service, attaching an image to  
e-mail, when viewing the image on a  
computer, etc.  
Pixel  
. About image sizes  
The size of an image indicates how many pixels it contains, and is expressed as  
x
horizontal pixels vertical pixels.  
x
12M (4000 3000) size image =  
4000*  
Approximately 12 million pixels  
x
VGA (640 480) size image =  
640*  
Approximately 300,000 pixels  
* Unit: pixels  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
34  
   
Image Size Selection Tips  
Note that larger images have more pixels, so they take up more memory space.  
More detail, but takes up more memory. Best  
when you plan to print large-size prints (such  
as A3 size).  
Large Number  
of Pixels  
Small Number Less detail, but takes up less memory. Best  
of Pixels  
when you want to send images by e-mail, etc.  
• For information about image size, image quality, and number of images that can be  
stored, see page 185.  
• For information about movie image size, see page 94.  
• For information about resizing existing snapshots, see page 118.  
. To select the snapshot image size  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the top control panel option (Snapshot Image  
Size).  
3. Use [4] and [6] to select an image size and then press [SET].  
Suggested  
Image Size  
(Pixels)  
Print Size and  
Application  
Description  
x
12M (4000 3000) Poster Print  
Good detail for better clarity even for  
images cropped (page 119) from the  
original  
x
3:2 (4000 2656)  
Poster Print  
x
16:9 (4000 2240) HDTV  
x
10M (3648 2736) Poster Print  
x
8M (3264 2448)  
A3 Print  
A4 Print  
Good detail  
x
5M (2560 1920)  
Best when preserving memory capacity  
is relatively more important than image  
quality.  
x
3M (2048 1536)  
x
3.5" 5" Print  
Image files are smaller, which is better  
when attaching images to e-mail.  
x
VGA (640 480)  
E Mail  
However, images are relatively coarser.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
35  
• The initial factory default image size setting is 12M (12 million pixels).  
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the  
standard aspect ratio of print paper.  
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has  
an aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio  
of television screens of the past. Your camera can record images that are  
compatible with the aspect ratio an HDTV screen.  
• You should regard the print paper sizes suggested here as guidelines only  
(200 dpi print resolution).  
• Available image sizes are limited for some functions as noted below.  
This image size is not supported by HS BEST SHOT scenes. Selecting  
12M  
an HS BEST SHOT scene after selecting “12M” in another mode will  
cause the image size setting to change to “10M” automatically.  
This image size is not supported by HS BEST SHOT scenes. Selecting  
an HS BEST SHOT scene after selecting “3:2” or “16:9” in another  
mode will cause the image size setting to change to “10M”  
automatically. However, when the “F CS” mode is selected for the “High  
Speed CS” HS BEST SHOT scene, the image size setting becomes  
“12M”.  
3:2,  
16:9  
This image size can be selected by HS BEST SHOT scenes only.  
Switching to another mode while the “High Speed CS” HS BEST SHOT  
scene is selected and High Speed CS is selected for the “CS mode”  
setting, or while “10M” is selected by another HS BEST SHOT scene  
will cause the image size to change to “12M” automatically.  
10M  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
36  
Specifying ISO Sensitivity (ISO)  
ISO sensitivity is a measure of sensitivity to light.  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the second control panel option from the top  
(ISO Sensitivity).  
3. Use [4] and [6] to select the setting you want and then press [SET].  
AUTO  
Adjusts sensitivity automatically according to conditions  
Lower  
sensitivity  
Slow shutter speed  
Less noise  
ISO 100  
ISO 200  
ISO 400  
ISO 800  
ISO 1600  
ISO 3200  
Fast shutter speed (Set  
for shooting in dimly lit  
areas.)  
Some coarseness  
(increased digital  
noise)  
Higher  
sensitivity  
• While “AUTO” is selected, Anti Shake corrects for subject movement only  
• Higher ISO sensitivity values tend to result in digital noise in images.  
• Since higher ISO sensitivity values tend to result in digital noise in images, the  
camera performs a noise filtering process. Because of this, it may take  
relatively longer for the camera to finish recording an image after it is shot. You  
will not be able to perform any key operation while image recording is in  
progress.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
37  
 
Adjusting White Balance (White Balance)  
You can adjust white balance to match the source of light available where you are  
shooting and avoid the blue cast that results when shooting outdoors when it is  
cloudy, and the green cast that results when shooting under fluorescent lighting.  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the third control panel option from the top  
(White Balance).  
3. Use [4] and [6] to select the shooting condition you want and then  
press [SET].  
¤
Auto WB  
Daylight  
Configures the camera to adjust white balance automatically  
For shooting outdoors on a clear day  
For shooting outdoors on an overcast rainy day, in the  
shade, etc.  
'
Overcast  
Shade  
For shooting on a clear day in the shade of trees or buildings  
For shooting under white or day white fluorescent lighting  
Day White  
Fluorescent  
Daylight  
Fluorescent  
For shooting under daylight fluorescent lighting  
For shooting under light bulb lighting  
«
·
Tungsten  
For configuring the camera manually to suit a particular light  
source.  
Select “·Manual WB”.  
Blank white paper  
1
2
Under the lighting conditions you plan  
to use when shooting, point the  
camera at a blank white piece of paper  
so it fills the entire monitor screen and  
then press the shutter button.  
Press [SET].  
Manual WB  
3
The white balance setting is retained even if you turn off the  
camera.  
• When Auto WB” is selected for the white balance setting, the camera  
automatically determines the white point of the subject. Certain subject colors  
and light source conditions can cause problems when the camera tries to  
determine the white point, which makes proper white balance adjustment  
impossible. If this happens, select the white balance setting that matches your  
shooting conditions (Daylight, Overcast, etc.).  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
38  
   
Correcting Image Brightness (EV Shift)  
You can manually adjust an image’s exposure value (EV value) before shooting it.  
• Exposure Compensation Range: –2.0 EV to +2.0 EV  
• Unit: 1/3EV  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the fourth control panel option from the top  
(EV Shift).  
3. Use [4] and [6] to adjust the exposure compensation value.  
[6]: Increases the EV value. A higher EV  
value is best for light-colored subjects  
and backlit subjects.  
[4]: Decreases the EV value. A lower EV  
value is best for dark-color subjects and  
for shooting outdoors on a clear day.  
To cancel exposure compensation, change  
the EV value to 0.0.  
Exposure compensation value  
4. Press [SET].  
This applies the exposure compensation value. The exposure compensation  
value you set remains in effect until you change it or turn off the camera (which  
causes it to revert to “0.0”).  
NOTE  
• When shooting under very dark or very bright conditions, you may not be able to  
obtain satisfactory results even after performing exposure compensation.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
39  
   
Using Flash (Flash)  
1. In the REC mode, press [2] (  
)
Flash  
once.  
2. Use [4] and [6] to select the flash  
setting you want and then press  
[SET].  
[2] (  
)
Flash fires automatically in accordance with exposure  
(amount of light and brightness) conditions.  
>
?
Auto Flash  
Flash Off  
Flash does not fire.  
Flash always fires. This setting can be used to brighten a  
subject that normally comes out dark due to daylight or  
backlight (daylight synchro flash).  
<
Flash On  
¥
Reduction  
Red Eye  
Flash fires automatically. This type of flash can be used to  
reduce the chance of redness in the subject’s eyes.  
3. Press the shutter button to shoot.  
Back lamp  
Flashes red while the flash is charging to indicate that image  
recording is disabled.  
• You will not be able to take another flash snapshot until the  
lamp stops flashing red, which indicates that charging is  
complete.  
<indicates the flash will fire.  
• For information about Flash Range, see page 189.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
40  
     
NOTE  
• Take care so your fingers and the strap do not block the flash.  
• The desired effect may not be obtained when the subject is too far away or too  
close.  
• Flash charging time (page 189) depends on operating conditions (battery  
condition, ambient temperature, etc.).  
• Shooting with flash turned off when lighting is dim results in a slow shutter speed,  
which can cause image blur due to camera movement. Under such conditions,  
secure the camera with a tripod, etc.  
• With red eye reduction, the flash is fired automatically in accordance with  
exposure. It does not fire in areas where lighting is bright.  
• The presence of outdoor sunlight, fluorescent lighting, or some other light source  
can cause abnormal image colors.  
• Select ?(Flash Off) for the flash setting when shooting in areas where flash  
photography is prohibited.  
Red-eye Reduction  
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the  
eyes of people who are in the image. This is caused when the light from the flash  
reflects off of the retina of the eye. When red-eye reduction is selected as the flash  
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the  
image to close, which reduces the chance of red eye.  
Note the following important points when using red-eye reduction.  
• Red-eye reduction does not work unless the people in the image are looking  
directly at the camera (flash).  
• Red-eye reduction may not work very well if the subjects are located far away from  
the camera.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
41  
Shooting with Zoom  
Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single  
SR Zoom, Multi SR Zoom, and digital zoom. The maximum zoom factor depends on  
the image size setting and the digital zoom on/off settings.  
Optical zoom  
HD Zoom  
Changes the lens focal distance.  
Allows greater zoom capabilities by cutting out a portion of the  
original image and enlarging it.  
Applies super resolution technology to suppress image  
deterioration (page 44).  
Single SR Zoom  
Shoots a burst of High Speed CS images, which are then  
combined into a final image to suppress image quality  
deterioration across a range that is greater than Single SR  
Zoom. (Multi SR Zoom is enabled by selecting the “Multi SR  
Zoom” HS BEST SHOT scene.) (page 72)  
Multi SR Zoom  
Digital zoom  
Digitally processes the center of the image to enlarge it.  
1. In the REC mode, slide the zoom controller to zoom.  
wWide Angle  
zTelephoto  
Zoom controller  
w(Wide Angle): Reduces the size of the subject and broadens the range.  
z(Telephoto) : Enlarges the subject and narrows the range.  
2. Press the shutter button to shoot the image.  
NOTE  
• Use of a tripod is recommended to protect against image blur due to camera  
movement when shooting with telephoto.  
• Performing a zoom operation changes the lens aperture.  
• Except for High Speed Movie, zoom operations are supported during movie  
recording. Zoom operations are disabled during high speed movie recording. To  
use optical zoom, perform the zoom operation before you press [0] (Movie) to start  
recording.  
• Zoom operations are not supporting during Slide Panorama shooting. The zoom  
setting is fixed at full wide angle.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
42  
 
Interpreting the Zoom Bar  
During a zoom operation, a zoom bar appears on the monitor screen to show the  
current zoom setting.  
Range where image deterioration is suppressed.  
(optical zoom, HD Zoom,  
Single SR Zoom, Multi SR Zoom)  
Deteriorated image range  
(digital zoom)  
1X  
28.0X to 111.6X  
Zoom pointer  
(Indicates current zoom.)  
Optical zoom limit point  
• 7X optical zoom point  
Point from which image deteriorates  
• The point from which image deteriorates depends on the image size and on  
the “Zoom (SR)” setting.  
Point from which image  
Zoom (SR) Setting  
deteriorates  
Off  
7.0X to 43.7X  
10.5X to 65.6X  
Single (Single SR Zoom)  
Multi SR Zoom  
(HS BEST SHOT scene)  
14.0X to 79.7X  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
43  
 
. Zoom Icon  
The appearance of the zoom icon on the monitor screen depends on the zoom factor.  
Optical zoom  
HD Zoom  
Not displayed  
Not displayed  
Single SR Zoom  
Multi SR Zoom  
Digital zoom  
ç(White)  
(Orange)  
ê, ê+ç(White) or ê+  
(Orange)  
. Zoom Factor  
The digital zoom factor depends on the image size (page 34), the super resolution  
zoom setting, and on whether or not the “Multi SR Zoom” HS BEST SHOT scene is  
selected (page 72).  
Multi SR Zoom is enabled by selecting the “Multi SR Zoom” HS BEST SHOT scene.  
Maximum zoom factor where image  
Total maximum zoom factor  
deterioration can be suppressed  
Image  
size  
Zoom(SR): Zoom(SR):  
Multi SR  
Zoom  
Zoom(SR): Zoom(SR):  
Multi SR  
Zoom  
Off  
Single  
10.5X  
10.5X  
10.5X  
Off  
Single  
42.0X  
42.0X  
42.0X  
12M  
3:2  
7.0X  
7.0X  
7.0X  
7.7X  
8.6X  
10.9X  
13.7X  
43.7X  
28.0X  
28.0X  
28.0X  
30.7X  
34.3X  
43.7X  
54.6X  
111.6X  
16:9  
10M  
8M  
14.0X  
15.6X  
20.0X  
24.9X  
79.7X  
56.0X  
62.4X  
79.7X  
99.5X  
111.6X  
12.9X  
16.4X  
20.5X  
65.6X  
51.4X  
65.5X  
81.9X  
111.6X  
5M  
3M  
VGA  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
44  
   
Zooming with Super Resolution (Zoom (SR))  
There are two types of Super Resolution Zoom: Single SR Zoom and Multi SR Zoom.  
Single SR Zoom uses super resolution to expand the zoom range in which image  
quality deterioration is minimized. Multi SR Zoom shoots a series of High Speed CS  
images, which are then combined into final image to suppress image quality  
deterioration across a range that is greater than Single SR Zoom. For information  
about the effective zoom factor ranges in which Super Resolution Zoom is effective,  
see page 44.  
The procedure below shows how to configure Single SR Zoom settings. For  
information about Multi SR Zoom, see page 72.  
1. In the REC mode, press [MENU].  
2. Use [4] and [6] to select the “REC” tab.  
3. Use [8] and [2] to select “Zoom (SR)” and then press [6].  
4. Use [8] and [2] to select “Single” and then press [SET].  
NOTE  
• Single SR Zoom is effective when you want to capture delicate textures.  
• Single SR Zoom does not work during movie recording.  
• The following functions are disabled when shooting with Single SR Zoom.  
Triple Self-timer, some BEST SHOT scenes  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
B
45  
   
Using Continuous Shutter  
To shoot with Continuous Shutter, press  
Õ(Continuous Shutter) and then select the “High  
Speed CS” scene.  
Note that the “High Speed CS” HS BEST SHOT  
scene has two modes: a High Speed CS mode and  
an F CS mode.  
Õ(Continuous Shutter)  
NOTE  
• To return from the “High Speed CS” HS BEST SHOT scene to the Single Shot  
mode, press [AUTO].  
Using High Speed CS and Prerecord CS  
With High Speed CS, you can configure the camera to shoot at a speed of 3, 5, 10,  
15, 30, or 40 images per second, as long as you keep the shutter button and there is  
memory available to store the images. With Prerecord CS, half-pressing the shutter  
button starts continual pre-recording of images to a temporary buffer. Then when you  
press the shutter button the rest of the way down, the camera stores what is currently  
in the buffer and starts real-time continuous shutter recording of new images. Real-  
time recording continues until you release the shutter button or until a total of up to  
30 images (buffer images plus new images) are recorded. You can configure  
Prerecord CS to specify how many of the 30 images are recorded in the buffer and  
how many are recorded after you fully press the shutter button. Use Prerecord CS  
when you want to make sure you do not miss fast-moving action.  
Shutter button half-press  
Shutter button full-press  
Shutter button release  
Recorded images (up to 30 images)  
Continuous recording of images until shutter  
button released*  
Pre-recorded images  
* You can record up to 30 images (pre-recorded buffer images plus real-time images) for  
each Prerecord CS operation.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
46  
   
• You can specify 5, 10, 20, or 30 as the maximum number of shots for each  
continuous shutter operation.  
• You can specify anywhere from 0.75 seconds up to 10 seconds as the continuous  
shutter shooting time, which is the amount of time of the pre-record buffer plus the  
amount of time that continuous shutter recording is performed after the shutter  
button is pressed all the way. The maximum shooting time depends on the  
selected CS speed. You can select a CS speed in the range of 3 to 40 fps.  
40 images per second  
You can shoot up to 30 images in 0.75 seconds.  
(40 fps)  
3 images per second  
(3 fps)  
You can shoot up to 10 images over 30 seconds.  
• You can configure the mode so up to 25 images are pre-recorded to the buffer until  
you fully press the shutter button.  
• The minimum number of pre-recorded buffer images you can specify is three. Total  
recording time depends on the current continuous shutter frames-per-second (fps)  
setting.  
• Specifying zero for the number of pre-recorded images disables Prerecord CS and  
performs High Speed CS only (without pre-recording).  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
47  
1. In the REC mode, press Õ(Continuous  
High Speed CS icon  
Shutter).  
2. Use [8], [2], [4], and [6] to select “High  
Speed CS” and then press [SET].  
• This will display Š(High Speed CS).  
3. Press [SET].  
4. Use [8] and [2] to select the fifth Control Panel option from the top  
(CS mode).  
5. Use [4] and [6] to select “High Speed CS”.  
6. Use [8] and [2] to select the fourth control panel option from the  
bottom (High Speed CS fps).  
7. Use [4] and [6] to select the continuous shutter  
CS speed  
(CS) speed you want.  
Enables specification of the number of CS images recorded per  
second.  
3 to 40 fps  
8. Use [8] and [2] to select the third control panel  
option from the bottom (Max CS shots).  
9. Use [4] and [6] to select the maximum number of shots for each  
continuous shutter operation.  
10. Use [8] and [2] to select the second control panel option from the  
bottom (Prerecord CS shots).  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
48  
11. Use [4] and [6] to specify how many of the 30 images and for how  
long images should be pre-recorded in the buffer.  
• Prerecord CS shooting is not performed when the number of buffer images and  
the recording time are both zero.  
Shutter button full-press  
Number of pre-record  
images and pre-record  
time  
Number of remaining images  
and remaining recording time  
after the shutter button full-  
press  
12. Press [SET].  
• The approximate number of recordable CS images will appear on the monitor  
screen.  
Number of recordable CS images (If you are not performing  
Prerecord CS, the allowable continuous shutter time also is displayed.)  
Remaining snapshot memory capacity  
13. Half-press the shutter button.  
This will cause the camera to start pre-recording images.  
• The camera will not emit a shutter sound when you half-press the shutter  
button while Prerecord CS is selected.  
• If you release the half-pressed shutter button before pressing it the rest of the  
way down, all of the pre-recorded images currently in the buffer will be deleted.  
14. When you are ready to shoot, press the shutter button the rest of the  
way down.  
This will record the images in the pre-record buffer and start recording new  
images in real-time. Images continue to be shot as long as you keep the shutter  
button depressed.  
15. Real-time shooting will stop when you release the shutter button or  
after the maximum number of shots is reached.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
49  
 
NOTE  
• Note the following when selecting a High Speed CS speed (fps) setting.  
– Use a higher High Speed CS speed (fps) setting when shooting a fast-moving  
subject.  
– Use a slower High Speed CS speed (fps) setting when shooting a slower-moving  
subject.  
• Note the following when selecting a High Speed CS maximum number of shots  
setting.  
– The greater the number of shots, the longer it takes to save them after shooting  
is complete.  
• Note the following when specifying a Prerecord CS shots setting.  
– A setting that results in a Prerecord CS operation that takes at least 0.3 seconds  
is recommended because there is a minimal lag from about 0.1 seconds to 0.3  
seconds between the point you decide to shoot and the point that the shutter  
button is fully depressed.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
50  
High Speed CS Shooting Using the Mechanical Shutter Only  
(F CS)  
Due to the characteristics of the CMOS imaging element, shooting fast-moving  
subjects with High Speed CS may cause the subject to become distorted. If this  
happens, try shooting with F CS (Full pixels Continuous Shutter), which uses the  
mechanical shutter only and eliminates the problems caused by the CMOS imaging  
element characteristics. Note that the following settings are available when shooting  
with F CS.  
CS Speed (frames per second): 3 fps, 5 fps, 10 fps  
Maximum Number of Shots: 5, 10, 20, 30  
Also, note that F CS does not support Prerecord CS.  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Use [8], [2], [4], and [6]to select “High Speed CS” and then press  
[SET].  
• This will display Š(High Speed CS).  
3. Press [SET].  
4. Use [8] and [2] to select the fifth Control Panel option from the top  
(CS mode).  
5. Use [4] and [6] to select “F CS”.  
6. Use [8] and [2] to select the fourth control panel option from the  
bottom (F CS fps).  
7. Use [4] and [6] to select the continuous shutter (CS) speed you want.  
Enables specification of the number of CS images recorded per second.  
8. Use [8] and [2] to select the third control panel option from the  
bottom (Max CS shots).  
9. Use [4] and [6] to select the maximum number of shots for each  
continuous shutter operation.  
10. Press [SET].  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
51  
 
11. Press the shutter button the rest of the way down.  
Images continue to be shot as long as you keep the shutter button depressed.  
12. Image recording will stop when you release the shutter button or after  
the maximum number of shots is reached.  
NOTE  
• After shooting a group of images with F CS, it may take a few seconds before the  
camera is ready to shoot again.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
52  
Continuous Shutter Precautions  
• When shooting CS images, the snapshot image quality automatically changes to  
“Normal”.  
• If there is not enough available capacity on the memory card, you may not be able  
to record the number of CS images indicated on the monitor screen. Make sure  
your memory card has sufficient remaining capacity before shooting with using  
continuous shutter.  
• With High Speed CS and F CS, exposure and focus for the first image are applied  
for successive images as well.  
• When using a continuous shutter mode, keep the camera still until shooting is  
finished.  
• With High Speed CS and F CS, the flash setting automatically becomes ?(Flash  
Off).  
• Zoom is disabled during continuous shutter operations.  
• The following image sizes cannot be selected while shooting with High Speed CS:  
“12M”, “3:2”, “16:9”. Entering the High Speed CS mode while any one of these  
image sizes is selected will cause the image size setting to change to “10M”  
automatically.  
• The following image sizes cannot be selected while shooting with the F CS mode:  
“3:2”, “16:9”. Entering the F CS mode while one of the above is selected will cause  
the image size setting to change to “12M” automatically.  
• With High Speed CS and F CS, the maximum number of images that can be  
recorded during each session is limited, regardless of how much memory card  
storage capacity is available.  
High Speed CS  
F CS  
Specified maximum number of continuous shutter shots  
(Max CS shots)  
The number of images will be restricted even further or shooting may be impossible  
when remaining memory card capacity is less than the allowable number of images  
for a particular CS mode.  
• The Triple Self-time cannot be used in the High Speed CS mode.  
• The Self-timer cannot be used in the Prerecord CS mode.  
• Continuous Shutter (CS) shooting is not supported while Premium Auto is being  
used.  
• Single SR Zoom and Multi SR Zoom cannot be used in combination with High  
Speed CS.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
B
53  
 
Recording Movies  
To record a movie  
The following procedure explains how to record a standard (STD) movie.  
See the pages indicated below for more information about movies.  
High-definition movie (FHD movie): page 57  
[0] (Movie)  
High speed movie (HS movie): page 57  
1. In the REC mode, press [MENU].  
2. Use [4] and [6] to select the “Quality” tab.  
3. Use [8] and [2] to select “»Quality” and  
then press [6].  
[MENU]  
4. Use [8] and [2] to select “STD” (Standard),  
and then press [SET].  
• Recording is performed with an aspect ratio of  
x
4:3, an image size of 640 480 pixels, and a  
frame rate of 30 frames per second (STD Movie).  
Image size setting cannot be changed.  
• The semi-transparent gray frame on the monitor  
screen indicates the area that is recorded when  
shooting a movie. The area within the frame is  
recorded for a movie.  
Semi-transparent gray  
frame  
5. Press [0] (Movie).  
Remaining recording time  
This will start recording and display Yon the  
monitor screen.  
Movie recording includes stereo audio.  
6. Press [0] (Movie) again to stop recording.  
Movie recording also will stop automatically if  
memory becomes full before you press [0] (Movie).  
• The maximum size allowed for a single movie file  
is 4GB. Movie recording stops automatically  
when a file becomes 4GB.  
Recording time  
Recording Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B
54  
     
Shooting with BEST SHOT  
With BEST SHOT (page 63), you can select the sample scene that matches the type  
of movie you are trying to shoot and the camera will change its setup accordingly, for  
beautiful movies every time. Selecting the “Natural Green” BEST SHOT scene, for  
example, will shot images with vivid green trees and grass.  
Minimizing the Effects of Camera Movement during Movie Recording  
You can configure the camera to minimize the effects of camera movement during  
FHD and STD movie recording (page 87). Note, however, that this does not prevent  
image blur due to subject movement.  
Audio  
Your camera has built-in microphones that can be used to record audio (stereo)  
during movie recording.  
. Recording Precautions  
The camera also records audio. Note the following points  
when shooting a movie.  
Microphones  
– Take care that the microphones are not blocked by your  
fingers, etc.  
– Good audio recording results are not possible when the  
camera is too far away from what you are trying to  
record.  
– Performing a zoom operation while shooting can cause zoom and/or auto focus  
noise to be in the audio recording.  
– Operating camera buttons while shooting can cause button noise to be picked  
up in the audio.  
• When shooting with the “HS” movie mode at a frame rate setting of “30-240 fps”,  
audio is recorded only while the camera is shooting at 30 fps. Audio is not recorded  
at any other frame rates.  
Recording Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
 
IMPORTANT!  
• Spending a long time using movie recording will cause the camera to become  
slightly warm to the touch. This is normal and does not indicate malfunction.  
• Shooting movies for long periods in areas where temperature is relatively high can  
cause digital noise (dots of light) to appear in the movie image. A rise in the  
camera’s internal temperature also may force movie recording to stop  
automatically. If this happens, stop recording and allow the camera to cool down,  
which should cause normal operation to resume.  
• Shooting a movie using the camera’s built-in memory will cause movie frames to  
be dropped. Always use a high speed memory card (not built-in memory) for movie  
recording.  
• Use of certain types of memory cards slows down data transfer and increases the  
time it takes to record movie data, which can result in movie frames being dropped.  
The Yindicator on the monitor screen turns yellow to indicate that frames are  
being dropped. In order to avoid problems such as these, use of an Ultra High  
Speed Type SD memory card is recommended. Note, however that CASIO makes  
no guarantees about the operation of any Ultra High Speed Type SD memory card  
used with this camera.  
NOTE  
• Except for High Speed Movie, zoom operations are supported during movie  
recording (page 42). Zoom is disabled during high speed movie recording. To use  
optical zoom for high speed movie recording, perform the zoom operation before  
you press [0] (Movie) to start recording.  
• Both Single SR Zoom (page 45) and Multi SR Zoom (page 72) are disabled during  
movie recording.  
• The effects of camera movement in an image become more pronounced when you  
shoot close up or with a large zoom factor. Because of this, use of a tripod is  
recommended under these conditions.  
• Except for High Speed Movie, Continuous AF (page 90) is performed during movie  
recording while “Auto Focus” or “Macro” is selected for the “Focus” setting.  
• During High Speed Movie recording, focus is fixed at the position where it was  
when recording started. To focus an image, half-press the shutter button for Auto  
Focus or focus manually before you press [0] (Movie) to start recording.  
• Face Detection is disabled during movie (FHD, STD, high speed) recording.  
• The following BEST SHOT scenes are always shot using high speed movie. The  
current “»Quality” setting is ignored.  
“Child High Speed Movie”, “Pet High Speed Movie”, “Sports High Speed Movie”  
Recording Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56  
Recording a High-definition Movie  
This camera supports recording of high-definition (FHD) movies. The aspect ratio of  
x
an FHD movie is 16:9, the image size is 1920 1080 pixels, and the frame rate is 30  
fps. Image quality and image size settings cannot be changed.  
1. In the REC mode, press [MENU].  
2. Use [4] and [6] to select the “Quality” tab.  
3. Use [8] and [2] to select “»Quality” and then press [6].  
4. Use [8] and [2] to select “FHD”, and then press [SET].  
5. Record the movie the same way as you would a normal movie (page  
54).  
Press [0] (Movie) to start and stop recording.  
Recording a High Speed Movie  
This camera supports recording of high speed movies at a maximum speed of  
480 fps. The aspect ratio of movies recorded with this mode depends on the frame  
rate (recording speed).  
• When recording with the frame rate setting of “30-240 fps” frame rate setting, audio  
recording is supported during 30 fps recording only. Audio is not recorded at any  
other frame rates.  
1. In the REC mode, press [MENU].  
2. Use [4] and [6] to select the “Quality” tab.  
3. Use [8] and [2] to select “»Quality” and then press [6].  
4. Use [8] and [2] to select the frame rate (recording speed) you want  
and then press [SET].  
A fast frame rate (such as 480 fps) will result in a smaller image size.  
Image Size  
(Pixels)  
»Quality  
Frame Rate  
x
432 320  
HS240  
HS480  
240 fps  
480 fps  
* fps (frames per second) is  
a unit of measurement  
indicating the number of  
images recorded or  
x
224 160  
x
432 320  
HS30-240  
30-240 fps  
played back per second.  
Recording Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
   
5. Record the movie the same way as you would a normal movie (page  
54).  
Press [0] (Movie) to start and stop recording.  
• During High Speed Movie recording, focus is fixed at the position where it was  
when recording started. To focus an image, half-press the shutter button for  
Auto Focus or focus manually before you press [0] (Movie) to start recording.  
• When “30-240 fps” is selected as the frame rate, recording always starts with a  
frame rate of 30 fps. You can switch the frame rate between 30 fps and 240 fps  
only while recording is in progress. Audio is recorded only while shooting at a  
30 fps. Use [4] and [6] or press [SET] to switch speeds.  
NOTE  
• The higher the frame rate (speed), the more lighting is required when shooting.  
When shooting a high speed movie, shoot in a well-lit environment.  
• When recording certain types of movies, the image that appears on the monitor  
screen may be smaller than normal. When recording a high speed movie, there are  
black bands along the top, bottom, left, and right of the screen.  
• When recording a high speed movie, light source flicker can cause horizontal  
bands to appear in the image. This does not indicate malfunction of the camera.  
• Monitor screen content switching is disabled during high speed movie recording.  
Recording Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
Using Prerecord Movie (Prerecord (Movie))  
With this feature, the camera pre-records up to five seconds of whatever is happening  
in front of the lens in a buffer that is continually updated. Pressing [0] (Movie) saves  
the pre-recorded action (buffer contents) followed by real-time recording. Real-time  
recording continues until you stop it. Prerecord Movie can be used when shooting a  
standard (STD) movie, a high-definition (FHD) movie, or a high speed (HS) movie.  
• When using Prerecord Movie in combination with high speed movie, the buffer will  
store two seconds of pre-recording instead of the usual five.  
[0] (Movie)  
[0] (Movie)  
Movie  
Real-time recording start  
Real-time recording end  
5-second prerecorded part (from the buffer)  
* Approximately two seconds for high speed movie  
. To set up the camera to shoot with Prerecord Movie  
1. In the REC mode, press [MENU].  
2. Use [4] and [6] to select the “Quality” tab.  
3. Use [8] and [2] to select “»Quality” and then press [6].  
4. Use [8] and [2] to select the movie mode you want to use for  
shooting.  
5. Press [SET].  
6. Use [8] and [2] to select the bottom Control Panel option (BS) and  
then press [SET] (page 33).  
7. Use [8], [2], [4], and [6] to select the “Prerecord (Movie)” scene and  
then press [SET].  
This causes (Prerecord (Movie)) to appear on the monitor screen, indicating  
that the camera is prerecording to its buffer.  
Recording Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
 
. To shoot a Prerecord Movie  
1. After using the above procedure to set up the camera for Prerecord  
Movie, point the camera at the subject.  
2. When you are ready to record, press [0] (Movie).  
This will save the approximately five seconds of action that was prerecorded in  
the buffer before you pressed [0] (Movie) (two seconds if you are using high  
speed movie) and start real-time recording.  
3. Press [0] (Movie) again to stop recording.  
• To turn off Prerecord Movie, press [SET], use [8] and [2] to select the bottom  
Control Panel option (BS) and then select R(Auto).  
• When shooting with the high speed movie “30-240 fps” setting, you cannot  
change the speed (fps) setting while the camera is pre-recording to the buffer  
in step 1 of the above procedure. You can change the speed (fps) setting after  
you press [0] (Movie) to start real-time recording.  
NOTE  
• While the camera is set up for shooting with Prerecord Movie, pressing the shutter  
button will not shoot a snapshot unless movie recording is in progress. With high-  
definition (FHD) and standard (STD) movie, you can shoot still images while  
realtime movie recording is in progress.  
• When shooting with Prerecord Movie in combination with high speed movie,  
pressing the [4] or [6] key will not change the EV shift or white balance setting,  
even if “EV Shift” or “White Balance” is assigned for the “L/R Key” function. To  
change the EV shift or white balance setting in this case, use the control panel.  
Recording Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
Recording a Movie for YouTube (For YouTube)  
The “For YouTube” scene records movies in a format that is optimal for uploading to  
the YouTube movie site, which is operated by YouTube, LLC. “For YouTube” can be  
used when shooting a standard (STD) movie, a high-definition (FHD) movie, or a high  
speed (HS) movie.  
1. In the REC mode, press [MENU].  
2. Use [4] and [6] to select the “Quality” tab.  
3. Use [8] and [2] to select “»Quality” and then press [6].  
4. Use [8] and [2] to select the movie mode you want to use for  
shooting.  
5. Press [SET].  
6. Use [8] and [2] to select the bottom Control Panel option (BS) and  
then press [SET] (page 33).  
7. Use [8], [2], [4], and [6] to select the “For YouTube” scene and then  
press [SET].  
This causes  
to appear on the monitor screen.  
8. Record the movie.  
The movie file will be stored in a camera folder named “100YOUTB”.  
• Installing YouTube Uploader for CASIO from the CD-ROM that comes with  
your camera simplifies uploading of movie files you recorded with the “For  
YouTube” scene to YouTube (page 139).  
• To exit “For YouTube” and return to normal snapshot recording, press [SET].  
Next, use [8] and [2] to select the bottom Control Panel option (BS), and then  
select R(Auto).  
NOTE  
• Movies recorded with the “For YouTube” scene are stored in a special folder to  
make them easy to locate for uploading (page 149). “For YouTube” movies are  
shot using the image size, recording speed, and quality settings configured in the  
Movie Mode (page 54).  
• Snapshots cannot be shot (regardless of whether you are recording or not) while  
the “For YouTube” scene is selected.  
• A single movie can have a maximum file size of 2,048MB or a playback time of  
15 minutes. The actual maximum recording time depends on the movie mode used  
for recording (page 187).  
Recording Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B
61  
   
Shooting a Snapshot while Shooting a Movie  
You can shoot snapshots while movie recording is in progress. When the camera is in  
the Single Shot mode, you can shoot snapshots one-by-one. In the CS mode, holding  
down the shutter button will record up to seven consecutive images at a speed of  
approximately 10 images per second (fps). You can shoot a maximum total of  
28 images during a single movie recording operation.  
1. While a movie is being recorded, press the  
shutter button.  
• In the CS mode, images continue to be shot as long  
as you keep the shutter button depressed.  
• Movie recording is not interrupted while snapshots  
are being shot.  
• While movie recording is in progress, you can toggle  
between the Single Shot Mode and the CS mode by  
pressing Õ(Continuous Shutter), [4], [6], or  
Number of recordable  
snapshots  
[SET]. Note that this method for mode switching is  
possible only during movie recording. The CS mode  
is indicated when  
is red (on the monitor screen),  
and the Single Shot mode is selected when tis  
red.  
NOTE  
• You can shoot up to 28 snapshots per movie. The number of snapshots is also  
limited by the amount of free space available on the memory card.  
• Note that shooting a snapshot while shooting a movie is supported during FHD  
movie and STD movie recording only. It is not supported during other types of  
movie recording.  
• The size of the recorded snapshot is 10M when “12M”, “3:2”, or “16:9” is selected  
as the image size before you start movie recording. For other sizes, the recorded  
snapshot is the currently specified image size.  
• The shooting range when shooting a snapshot while movie recording is in progress  
is narrower than that of the Single Shot Mode.  
• Snapshots shot with Snapshot in Movie cannot be focused individually. The focus  
will be the same as the movie being recorded.  
• The field of view of a snapshot shot while FHD movie recording is in progress will  
be wider than the field of view of the FHD movie.  
• When shooting CS images, the snapshot image quality automatically changes to  
“Normal”.  
Recording Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
 
Using BEST SHOT  
What is BEST SHOT?  
BEST SHOT provides you with a collection of sample “scenes” that show a variety of  
different types of shooting conditions. When you need to change the setup of the  
camera, simply find the scene that matches what you are trying to achieve, and the  
camera sets up for it automatically. This helps to minimize the chance of ruined  
images due to poor exposure and shutter speed settings. This camera includes single  
shot BEST SHOT scenes and high speed BEST SHOT (HS BEST SHOT) scenes.  
Some Sample Scenes  
High Speed  
High Speed  
Night Scene  
Portrait  
Scenery  
Night Scene and  
Portrait  
To shoot an image with Single Shot mode BEST SHOT  
1. In the REC mode, press [SET].  
Currently selected scene  
(with boundary)  
[8] [2] [4] [6]  
2. Use [8] and [2] to select the  
bottom Control Panel option (BS)  
and then press [SET] (page 33).  
This will display a menu of Single Shot  
mode BEST SHOT scenes.  
• The initial default selection is R  
(Auto).  
Scene name  
Scene number  
[SET]  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
63  
         
3. Use [8], [2], [4], and [6] to move the boundary to the scene you want  
to select.  
• The scene menu has multiple pages. Use [8] and [2] to scroll between menu  
pages.  
• You can access information about the currently selected scene. See page 65  
for details.  
• To return to normal snapshot recording, press [AUTO] or select Scene 1 R  
(Auto).  
4. Press [SET] to configure the camera with the settings for the currently  
selected scene.  
This returns to the REC mode.  
• The settings of the scene you selected remain in effect until you select a  
different scene.  
• To select a different BEST SHOT scene, repeat the above procedure from  
step 1.  
5. Press the shutter button (if you are shooting a snapshot) or [0] (Movie)  
(if you are shooting a movie).  
To shoot an image with HS BEST SHOT (HS BEST SHOT)  
1. In the REC mode, press Õ(Continuous  
Shutter).  
This displays a menu of HS BEST SHOT scenes.  
• The initial default selection is R(Auto).  
2. Use [8], [2], [4], and [6] to move the  
Õ
(Continuous Shutter)  
boundary to the scene you want to select.  
• The scene menu has multiple pages. Use [8]  
Currently selected scene  
(with boundary)  
and [2] to scroll between menu pages.  
• You can access information about the  
currently selected scene. See page 65 for  
details.  
• To return to normal snapshot recording, press  
[AUTO] or select BEST SHOT Scene 1:  
R(Auto).  
Scene name  
Scene number  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
64  
 
3. Press [SET] to configure the camera with the settings for the currently  
selected scene.  
This returns to the REC mode.  
• The settings of the scene you selected remain in effect until you select a  
different scene.  
• To select a different BEST SHOT scene, repeat the above procedure from  
step 1.  
4. Press the shutter button (if you are shooting a snapshot) or [0] (Movie)  
(if you are shooting a movie).  
. Using the Scene Information Screen  
To find out more about a scene, select it with the boundary  
on the scene menu and then slide the zoom controller in  
either direction.  
• To return to the scene menu, slide the zoom controller  
again.  
• To scroll between scenes, use [4] and [6].  
• To configure the camera with the settings for the currently  
selected scene, press [SET].  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
65  
 
. BEST SHOT Precautions  
• BEST SHOT scene images were not shot using this camera.  
• Images shot using a BEST SHOT scene may not produce the results you expected  
due to shooting conditions and other factors.  
• You can modify the camera settings that are configured after you select a BEST  
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults  
when you select another BEST SHOT scene or turn off the camera.  
• Snapshot shooting is disabled while the following BEST SHOT scenes are being  
used.  
“Prerecord (Movie)”, “For YouTube”, HS BEST SHOT movie scenes  
• Movie recording is disabled while the following BEST SHOT scenes are being  
used.  
“HDR”, “HDR Art”, “Multi SR Zoom”, “Slide Panorama”, “High Speed Best  
Selection”, “Lag Correction”, “High Speed Anti Shake”  
• Except for the “High Speed CS” scene, all other HS BEST SHOT scenes do not  
support shooting with the F CS mode. The High Speed CS mode is always applied  
for the “CS mode” setting for all HS BEST SHOT scenes other than the “High  
Speed CS”. When shooting with the “High Speed CS” scene, you can select either  
the High Speed CS mode or the F CS mode with the “CS mode” setting.  
• FHD movie and STD movie recording are disabled (and high speed movie is  
always enabled) while the following BEST SHOT scenes are being used.  
“Child High Speed Movie”, “Pet High Speed Movie”, “Sports High Speed Movie”  
• Shooting with a BEST SHOT scene automatically shoots with the mode setting that  
is configured for that scene, regardless of whether the camera’s current REC mode  
setting is Single Shot or continuous shutter (CS) setting.  
• Except for “Auto”, the “12M”, “3:2”, and “16:9” image size settings are not  
supported by HS BEST SHOT. Selecting any HS BEST SHOT scene except for  
“Auto” while one of the above image size settings is selected will cause the setting  
to change to “10M”.  
• When the movie mode is FHD/STD, movies are recorded using the settings of the  
selected BEST SHOT scene. For high speed movie recording, BEST SHOT scene  
settings are ignored and movie recording is performed as it normally is.  
• Except for “Auto”, all HS BEST SHOT scenes ignore the current “Zoom (SR)”  
setting.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
66  
Creating Your Own BEST SHOT Setups  
You can save up to 999 camera setups as user BEST SHOT scenes for instant recall  
whenever you need them.  
1. In the Single Shot mode, select the “BEST SHOT (Register User  
Scene)” BEST SHOT scene.  
2. Use [4] and [6] to select the snapshot whose setup you want to save.  
3. Use [8] and [2] to select “Save”, and then press [SET].  
Your BEST SHOT scene will be assigned the name “Recall User Scene”, along  
with a scene number.  
NOTE  
• You can create BEST SHOT setup for snapshots only. You cannot create a movie  
BEST SHOT setup.  
• You can check the settings of the currently selected BEST SHOT scene by  
displaying the camera’s setting menus and looking at its settings.  
• User snapshot scenes are assigned numbers in the sequence: U1, U2, and so on.  
• The following are the settings that are saved for each user snapshot BEST SHOT  
scene.  
Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting,  
Flash Intensity, Color Filter, Sharpness, Saturation, Contrast  
• User BEST SHOT scenes are stored in built-in memory (page 149) in the SCENE  
folder (snapshots).  
• Formatting the camera’s built-in memory (page 160) deletes all user BEST SHOT  
scenes.  
• Use the following procedure when you want to delete a user BEST SHOT scene.  
Display the information screen (page 65) of the user BEST SHOT scene you  
want to delete.  
1
Press [2] (  
), select “Delete”, and then press [SET].  
2
• The setup of a snapshot shot with the following functions cannot be saved as a  
user BEST SHOT setup.  
Premium Auto, HDR, HDR Art, Multi SR Zoom, Slide Panorama, High Speed Best  
Selection, Lag Correction, High Speed Night Scene, High Speed Night Scene and  
Portrait, High Speed Anti Shake  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
67  
 
Shooting with High Speed Night Scene  
(High Speed Night Scene/High Speed Night Scene and  
Portrait)  
With High Speed Night Scene and High Speed Night Scene and Portrait, the camera  
detects automatically whether it is being hand-held or on a tripod. If the camera  
detects it is being hand-held, pressing the shutter button will record a series of  
images and combine them in a way that minimizes image blur due to low light  
conditions. If the camera detects it is on a tripod, it will shoot a single image using a  
longer exposure time (instead of shooting and combining multiple images), which  
results in an even clearer image. The flash is always disabled while “High Speed  
Night Scene” is selected. If the night scene image you are shooting includes people,  
use the “High Speed Night Scene and Portrait” BEST SHOT scene. The flash mode  
setting becomes >(Auto Flash) when shooting with “High Speed Night Scene and  
Portrait”.  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select “High Speed Night Scene” or “High Speed Night Scene and  
Portrait” and then press [SET].  
3. When you are ready to shoot, press the shutter button.  
• After you press the shutter button, the message “Busy... Please wait...” will  
appear on the monitor screen to indicate that recording is in progress. Keep the  
camera still while this message is displayed. The recording process takes  
some time to complete after the message appears. Image shooting is disabled  
while the message is displayed.  
NOTE  
• When holding the camera by hand while shooting with these BEST SHOT scenes,  
make sure that the subjects remain as still as possible as the camera shoots the  
series of images.  
• Even when holding the camera by hand while shooting with “High Speed Night  
Scene and Portrait”, under certain conditions the camera may shoot only a single  
image instead of a series of images.  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• Movement while the camera is mounted on a tripod may cause the camera to  
erroneously judge it is being hand held.  
• If surroundings are extremely dark when shooting with “High Speed Night Scene”  
or “High Speed Night Scene and Portrait”, the camera may not be able to shoot at  
proper brightness due to insufficient exposure.  
• When shooting with these BEST SHOT scenes, the “ISO Sensitivity” setting is fixed  
at “AUTO”.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
68  
 
Shooting with High Speed Anti Shake  
(High Speed Anti Shake)  
When you press the shutter button while High Speed Anti Shake is enabled, the  
camera records multiple images and automatically combines them in a way that  
produces a final image with minimal blur. You can shoot with this feature to minimize  
the effects of camera movement when shooting with optical anti shake does not  
produce the desired results.  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select “High Speed Anti Shake” and then press [SET].  
3. When you are ready to shoot, press the shutter button.  
• After you press the shutter button, the message “Busy... Please wait...” will  
appear on the monitor screen to indicate that recording is in progress. Keep the  
camera still while this message is displayed. The recording process takes  
some time to complete after the message appears. Image shooting is disabled  
while the message is displayed.  
NOTE  
• With this BEST SHOT scene, the flash setting automatically becomes ?(Flash  
Off).  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• High Speed Anti Shake may not operate properly resulting in blurred images if the  
camera is moved more than the allowable range or if the subject moves during  
shooting.  
• When shooting with this BEST SHOT scene, the “ISO Sensitivity” setting is fixed at  
“AUTO”.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
69  
 
Digitally Correcting for Overexposure and Underexposure  
(HDR)  
With HDR (High Dynamic Range), the camera shoots a series of CS images using  
different exposure settings and combines them into a final image to correct for  
overexposure or underexposure of subjects of different brightness levels.  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select “HDR” and then press [SET].  
3. Press the shutter button to shoot.  
• After you press the shutter button, the message “Busy... Please wait...” will  
appear on the monitor screen to indicate that recording is in progress. Keep the  
camera still while this message is displayed. The recording process takes  
some time to complete after the message appears. Image shooting is disabled  
while the message is displayed.  
NOTE  
• HDR works best when shooting with the camera mounted on a tripod.  
• With this BEST SHOT scene, the flash setting automatically becomes  
Off).  
?
(Flash  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• The desired HDR effect may not be attained if the camera or subject moves during  
shooting.  
• Depending on shooting conditions and image composition, this BEST SHOT scene  
may not be able to produce the desired result.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
70  
 
Shooting Snapshots Digitally Processed for Artistic Effect  
(HDR Art)  
This feature applies HDR (High Dynamic Range, page 70) photography to transform  
snapshots into works of art that provide a greater degree of expression than  
conventional photography.  
Normal image  
HDR-ART image  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select “HDR Art” and then press [SET].  
3. Press the shutter button to shoot.  
• After you press the shutter button, the message “Busy... Please wait...” will  
appear on the monitor screen to indicate that recording is in progress. Keep the  
camera still while this message is displayed. The recording process takes  
some time to complete after the message appears. Image shooting is disabled  
while the message is displayed.  
NOTE  
• HDR Art works best when shooting with the camera mounted on a tripod.  
?
• With this BEST SHOT scene, the flash setting automatically becomes  
Off).  
(Flash  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• The desired HDR Art effect may not be attained if the camera or subject moves  
during shooting.  
• Depending on shooting conditions and image composition, this BEST SHOT scene  
may not be able to produce the desired result.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
C
71  
 
Expanding the Zoom Range to Shoot Clearer Snapshots  
(Multi SR Zoom)  
This feature uses super resolution technology and multiple Continuous Shutter (CS)  
images to expand the zoom range for overall images of higher quality and clarity.  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select “Multi SR Zoom” and then press [SET].  
• When shooting with Multi SR Zoom, it may take longer before EXILIM is ready  
for shooting.  
3. Press the shutter button to shoot.  
• After you press the shutter button, the message “Busy... Please wait...” will  
appear on the monitor screen to indicate that recording is in progress. Keep the  
camera still while this message is displayed. The recording process takes  
some time to complete after the message appears. Image shooting is disabled  
while the message is displayed.  
NOTE  
• Multi SR Zoom is effective when you want to capture delicate textures.  
• The current “Zoom (SR)” (page 45) setting is ignored when shooting with this  
function.  
?
• With this BEST SHOT scene, the flash setting automatically becomes  
Off).  
(Flash  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• The desired Multi SR Zoom effect may not be attained if the camera or subject  
moves during shooting.  
• Depending on shooting conditions and image composition, this BEST SHOT scene  
may not be able to produce the desired result.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
72  
 
Shooting a Panorama Image (Slide Panorama)  
With Slide Panorama, you move the camera to compose  
and record multiple images, which are then combined to a  
panorama. This feature lets you shoot a panorama of up to  
360 degrees, which is dramatically greater than the physical  
capabilities of the lens.  
• The final panorama image can be one of the two sizes shown below.  
x
Slide Direction is Right or Left: 12M (11520 1080 pixels)  
x
Slide Direction is Up or Down: 14M (1920 7296 pixels)  
• Zoom operations are not supporting during Slide Panorama shooting. The zoom  
setting is fixed at full wide angle.  
• You can use Slide Panorama to shoot a horizontal image up to approximately 360  
degrees and a vertical image up to approximately 180 degrees.  
If you shoot a horizontal Slide Panorama image that is less than 360 degrees, the  
image size will become 60, 120, 180, 240, or 300 degrees.  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select the “Slide Panorama” scene.  
3. Press [SET] and then use [8] and [2] to select the fifth Control Panel  
option from the bottom (Slide Direction).  
4. Use [4] and [6] to select the direction you are planning to move the  
camera while shooting, and then press [SET].  
You can select one of four directions: Right, Left, Up, or Down.  
5. Point the camera at the start of the panorama and half-press the  
shutter button to allow the camera to focus automatically.  
6. Press the shutter button the rest of the way down  
and a slide cursor will appear on the monitor  
screen. Slowly move the camera in the direction  
indicated by the arrow on the screen until the  
slide cursor reaches the other end of its  
movement range (i.e. all the way to the right  
when moving the camera to the right).  
• The camera will start composing the panorama image  
internally when the slide cursor reached the other end  
of the movement range.  
Slide cursor  
• Image composing also will start automatically if you stop moving the camera  
during panorama shooting. After you stop moving the camera, the message  
“Busy... Please wait...” appears as the camera processes the image. Wait until  
this message disappears before using the camera. Image shooting is disabled  
while the message is displayed.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
B
73  
 
NOTE  
• The following conditions are not compatible with Slide Panorama shooting.  
– Subject whose brightness is very different from that of its surroundings due to  
artificial light, sunlight, etc.  
– Rivers, waves, waterfalls, or other subject with constantly changing patterns  
– Sky, beach, or other subject with continuous patterns  
– Camera too close to the main subject  
– Moving subject  
• Slide Panorama may stop part way through in the following cases.  
– Subject or camera movement  
– Camera movement that is too fast or too slow  
• Shooting a Slide Panorama image after half-pressing the shutter button to perform  
Auto Focus may not produce the desired results if there are considerable  
differences in the brightness, color, and/or focus of the individual images. If this  
happens, try changing the focus position by focusing on a different subject, etc.  
• Since a Slide Panorama image is created by joining multiple images together, there  
may be some roughness at the point where two images are joined.  
• Shooting under a flickering light source (such as fluorescent lighting) may result in  
uneven brightness and/or coloring in the final Slide Panorama image.  
• Shooting in dark surroundings may result in a blurred image or may make Slide  
Panorama shooting impossible.  
• Slowly move the camera at a constant speed in the same direction as the arrow  
that appears on the monitor screen.  
• When moving the camera, try to keep the arrow on the monitor screen as straight  
as possible.  
• The exposure and white balance when shooting Slide Panorama images are fixed  
at the levels measured when you half-press the shutter button at the beginning of  
the operation.  
• An error message will appear if the camera is unable to successfully record a  
series of images.  
• If you shoot a moving subject, the camera may not be able to compose the  
panorama image properly.  
• With this BEST SHOT scene, the flash setting automatically becomes ?(Flash  
Off).  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
74  
Configuring the Camera to Help You Better Time Your Shots  
(Lag Correction)  
There always is some unavoidable time lag between the point you press the shutter  
button and the point that the image is actually recorded. The “Lag Correction” feature  
lets you configure the camera to lessen or even eliminate this lag to help you better  
time your shots and get exactly the moment you want. With “Lag Correction”, you  
half-press the shutter button and compose the image you want to shoot. Then when  
you full-press the shutter button, the camera pre-records a total of 5 images, including  
four images of action that happened before you fully pressed the shutter button. After  
that, you can view the images on the monitor screen and select the one you want to  
keep.  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select “Lag Correction” and then press [SET].  
3. With the camera pointed at the subject, half-press and hold the shutter  
button.  
The camera will start pre-recording images at this time.  
• If you release the half-pressed shutter button before pressing it the rest of the  
way down, all of the pre-recorded images currently in the buffer will be deleted.  
4. When you are ready to shoot, press the shutter button all the way  
down.  
After pre-recording is complete, one of the five images will appear on the monitor  
screen for about three seconds.  
5. If you want to view all five of the pre-recorded images, press [SET]  
within about three seconds after a recorded image appears on the  
monitor screen.  
If you do not press [SET] within three seconds, the image displayed in step 4 will  
be saved automatically as the final image.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
75  
 
6. Use [4] and [6] to scroll through the pre-recorded images on the  
monitor screen.  
Use [4] and [6] to scroll through the pre-recorded images. Each image appears,  
along with an indication of the timing when it was pre-recorded.  
–0.4 sec.  
–0.3 sec.  
–0.2 sec.  
–0.1 sec.  
SHUTTER  
(Full-press)  
(0.4*)  
(0.3*)  
(0.2*)  
(0.1*)  
* Seconds prior to full-press of shutter button.  
• The timing of the image you select here will be the timing of the image  
displayed first in step 4 the next time you perform the above procedure. If you  
select the image that was pre-recorded 0.3 seconds prior to full-press of the  
shutter button, for example, the –0.3-second image will be displayed in step 4  
the next time you perform the above procedure.  
7. To save the currently displayed image as the final images, press [SET].  
NOTE  
?
• With this BEST SHOT scene, the flash setting automatically becomes  
Off).  
(Flash  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• The Self-timer cannot be used with this BEST SHOT scene.  
• With this BEST SHOT scene, half-pressing the shutter button fixes focus and  
exposure at their current levels.  
• With this BEST SHOT scene, image recording will not be successful if you full-  
press the shutter button without allowing enough time (at least 0.4 seconds) after  
half-pressing it.  
• Pay close attention to the subject when shooting. Failure to do so can cause  
considerable lag from the instant you want to shoot until you actually full-press the  
shutter button. This can cause image recording to be too late, even if you use this  
function.  
• The current “Review” setting (page 92) is ignored when shooting with this function.  
Immediately after you full-press the shutter button, one of the five pre-recorded  
images will appear on the display as in step 4 of the above procedure.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
76  
Shooting with Priority on Subject Faces  
(High Speed Best Selection)  
With High Speed Best Selection, the camera automatically shoots a series of images,  
and selects the best one based on facial image blur, and facial expression (whether  
the subject is smiling or blinking).  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select “High Speed Best Selection” and then press [SET].  
3. Press the shutter button to shoot.  
• This will cause the message “Busy... Please wait...” to appear. Do not move  
the camera while this message is displayed. The recording process takes  
some time to complete after the message appears.  
NOTE  
• With this BEST SHOT scene, the flash setting automatically becomes ?(Flash  
Off).  
• Shooting with this BEST SHOT scene makes the shooting range narrower than  
normal.  
• If one or more of the faces are blurred in all of the images that are shot, they will be  
blurred in the final image as well.  
• The following conditions may make it impossible for the camera to determine if the  
subject is blinking or smiling. This may result in a final image in which the subject is  
blinking or not smiling.  
– Faces that are partially or completely darkened by shadows, etc.  
– Hair that is hiding or near the eyes  
– Eye glasses  
– Small faces  
– Faces that are not looking directly at the camera  
• Shooting a large group of people will cause processing of the image after shooting  
to take longer.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
77  
 
Using the Situation-specific CS Scenes  
The High Speed CS capabilities provide you with a variety of BEST SHOT options to  
suite exactly the type of image you are trying to record. Images continue to be shot as  
long as you keep the shutter button depressed, with the shooting speed optimized  
according to the BEST SHOT scene you are using.  
Prerecord CS (page 46) pre-records images when you half-press the shutter button.  
Then when you press the shutter button the rest of the way down, the camera stores  
what is currently in the buffer and starts real-time continuous shutter shooting of new  
images. Shooting continues until you release the shutter button or until a total of up to  
30 images (buffer images plus new images) are shot. Some of the 30 images are of  
action that occurred before you full-pressed the shutter button and some are after.  
This helps to ensure you capture exactly the moment you want, even if your timing is  
slightly off.  
Shutter button release  
Shutter button full-press  
Shutter button half-press  
Recorded images (up to 30 images)  
Continuous recording of images until  
shutter button released*  
Pre-recorded images  
* You can record up to 30 images (pre-recorded buffer images plus real-time images) for  
each Prerecord CS operation.  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select the BEST SHOT scene you want to use and then press [SET].  
The following are the settings for each BEST SHOT scene.  
Scene Name  
Child CS  
CS fps  
10 fps  
15 fps  
30 fps  
Maximum CS Shots Pre-recorded Shots  
20 (2 seconds)  
30 (2 seconds)  
30 (1 second)  
5 (0.5 seconds)  
5 (0.3 seconds)  
10 (0.3 seconds)  
Pet CS  
Sports CS  
* You can change the above settings if you want. See page 46 for details.  
3. Half-press and hold the shutter button to start pre-recording of images.  
A preset number of images are pre-recorded. The pre-recorded images are  
continually updated until you full-press the shutter button.  
• If you release the half-pressed shutter button before pressing it the rest of the  
way down, all of the pre-recorded images currently in the buffer will be deleted.  
• The camera will not emit shutter sounds as it pre-records images.  
4. Press the shutter button the rest of the way down.  
This will save the pre-recorded images and start shooting new images in real-  
time. Images continue to be shot as long as you keep the shutter button  
depressed.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
78  
 
5. Shooting will stop when you release the shutter button or after the  
maximum number of shots is reached.  
NOTE  
• When shooting with these BEST SHOT scenes, the camera’s current HS BEST  
SHOT “High Speed CS” scene mode setting (High Speed CS or F CS) is ignored  
and shooting is always performed using the High Speed CS mode. Control panel  
operations, recording, and precautions are the same as those that apply to the HS  
BEST SHOT “High Speed CS” scene (page 46).  
• Prerecord CS (pre-recording of images before the shutter button is full-pressed) is  
not performed if you full-press the shutter button without half-pressing first.  
Whenever possible, be sure to half-press the shutter button, compose the image,  
and then full-press the shutter button.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
79  
Using the Situation-specific High Speed Movie Scenes  
The High Speed Movie capabilities of the camera provide you with a variety of BEST  
SHOT options to suite exactly the type of image you are trying to record.  
1. In the REC mode, press Õ(Continuous Shutter).  
2. Select the BEST SHOT scene you want to use and then press [SET].  
Scene Name  
Frame Rate  
240 fps  
Child High Speed Movie  
Pet High Speed Movie  
Sports High Speed Movie  
240 fps  
480 fps  
3. Record the movie the same way as you would a normal movie (page  
54).  
Press [0] (Movie) to start and stop recording.  
• During High Speed Movie recording, focus is fixed at the position where it was  
when recording started. To focus an image, half-press the shutter button for  
Auto Focus or focus manually before you press [0] (Movie) to start recording.  
NOTE  
• These BEST SHOT scenes always shoot using High Speed Movie. The current  
»Quality” setting is ignored.  
• Precautions and the shooting procedure are the same as those for High Speed  
Movie recording (page 57), except that the following functions are disabled.  
– Prerecord Movie  
– YouTube movie recording  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
80  
 
Advanced Settings  
The following are menu operations you can use to configure various camera settings.  
Using On-screen Menus  
. Example Menu Screen Operation  
1. In the REC mode, press [MENU].  
[8] [2] [4] [6]  
This will display the menu screen.  
• Menu contents are different in the REC  
mode and PLAY mode.  
2. Use [4] and [6] to select the tab where  
the item you want to configure is located.  
[MENU]  
Example:  
[SET]  
3. Use [8] and [2] to select the menu item  
you want, and then press [6].  
When “Self-timer” is  
selected on the “REC” tab  
4. Use [8] and [2] to change the setting.  
5. After the setting is the way you want,  
Tabs  
press [SET].  
• Pressing [4] registers the selected setting  
and returns to the menu.  
• To configure settings on another tab after  
pressing [4] to return to the menu, use [8]  
to move the highlighting up to the tabs, and  
then use [4] and [6] to select the tab you  
want.  
• Pressing [MENU] interrupts the menu  
operation and exits the menu screen.  
Items  
IMPORTANT!  
• Switching from “Auto” to “Premium Auto” (page 25) will make some menu items  
unavailable.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
81  
       
. Menu Operations in This Manual  
Menu operations are represented in this manual as shown below. The following  
operation is the same as the one described under “Example Menu Screen Operation”  
Use [4] and [6] to select the “REC” tab.  
Procedure  
[r] (REC) * [MENU] * REC Tab * Self-timer  
Press  
[r] (REC).  
Press  
[MENU].  
Use [8] and [2] to select “Self-timer” and  
then press [6].  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
82  
REC Mode Settings (REC)  
Zooming with Super Resolution (Zoom (SR))  
Procedure  
[r] (REC) *[MENU] *REC Tab *Zoom (SR)  
See page 45 for details.  
Selecting a Focus Mode (Focus)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Focus  
Approximate Focus  
Range*1  
Focus Mode  
Settings Type of Shot  
Snapshot  
Movies  
Snapshot Movies  
Approximately 2 cm to  
9(infinity) (0.8" to 9)  
(Wide Angle)  
QAuto General  
Automatic  
Automatic  
3
Focus  
recording  
*
Approximately 2 cm to 50 cm  
(0.8" to 19.7")  
(Wide Angle)  
´
Macro  
Automatic  
Close ups  
Automatic  
3
*
Scenery and  
other distant  
subjects  
)
Infinity  
Fixed  
Infinity (Wide Angle)  
W
Manual  
Focus  
When you  
want to focus  
manually  
Approximately 2 cm to  
9(infinity)*2 (0.8" to 9)  
(Wide Angle)  
Manual  
*1 The focus range is the distance from the lens surface.  
*2 The focus range depends on the current optical zoom position.  
*3 During High Speed Movie recording, focus is fixed at the position where it was when  
recording started. To focus an image, half-press the shutter button for Auto Focus or  
focus manually before you press [0] (Movie) to start recording.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
83  
       
To focus with manual focus  
1. On the monitor screen, compose the image so  
the subject you want to focus on is within the  
yellow boundary.  
2. Watching the image on the monitor screen use  
[4] and [6] to adjust focus.  
• At this time the image that is within the boundary  
will enlarge and fill the monitor screen, which aids  
in focusing. If you do not perform any operation for  
two seconds while the enlarged image is displayed,  
the screen in step 1 will re-appear.  
Yellow boundary  
NOTE  
• An Auto Macro feature detects how far the subject is from the lens and  
automatically selects either Macro Focus or Auto Focus accordingly.  
• Use of the flash together with Macro Focus can cause the light of the flash to  
become blocked, which may result in unwanted lens shadows in your image.  
• In the case of movie recording, Auto Macro operates before you start recording.  
After recording is started, however, focus is fixed.  
• Whenever you perform an optical zoom operation while shooting with Auto Focus,  
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell  
you the focus range, as shown below. Note that the focus range is displayed  
including the Auto Macro range only when shooting with Auto Focus.  
Example: oocm to 9  
* oois the actual focusing range value.  
• The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page  
91) are disabled while Manual Focus is selected as the focus mode.  
• Turning on “Face Detection” causes the focus mode to change automatically to Q  
(Auto Focus). Changing the focus mode setting to anything other than Q(Auto  
Focus) causes “Face Detection” to turn off automatically.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84  
Using Focus Lock  
Subject to be focused on  
“Focus lock” is a technique you can use when you want to  
compose an image in which the subject you want to focus  
on is not within the focus frame in the center of the  
screen.  
• To use focus lock, select “ÍSpot” or “ËTracking”  
for the Auto Focus area (page 88).  
1. Align the monitor screen’s focus frame with  
the subject you want to focus on and then half-  
press the shutter button.  
Focus frame  
2. Keeping the shutter button half-pressed  
(which maintains the focus setting), move the  
camera to compose the image.  
• When ËTracking” is selected as the Auto Focus  
area, the focus frame will move automatically and  
follow the subject.  
3. When you are ready to shoot the image, press the shutter button the  
rest of the way down.  
NOTE  
• Focus lock also locks exposure (AE).  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
85  
 
Using the Self-timer (Self-timer)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Self-timer  
With the Self-timer, pressing the shutter button starts a timer. The shutter is released  
and the image is shot after a fixed amount of time.  
10 sec 10-second Self-timer  
2-second Self-timer  
• When shooting under conditions that slow down the shutter speed,  
you can use this setting to prevent image blur due to camera  
movement.  
2 sec  
Shoots three images: one image 10 seconds after the shutter button  
is pressed, and the next two images as soon as the camera is ready  
after shooting the previous image. How long it takes for the camera to  
get ready to shoot depends on the image size and quality settings,  
whether or not a memory card is loaded in the camera, and the flash  
charge condition.  
(Triple  
Self-timer)  
X3  
Off  
Self-timer is disabled.  
• The front lamp flashes while the Self-timer countdown is in  
Front lamp  
progress.  
• You can interrupt an ongoing Self-timer countdown by  
pressing [SET].  
NOTE  
• The Self-timer cannot be used together with the following features.  
High Speed CS with Prerecord CS, Prerecord (Movie), Lag Correction, Child CS,  
Pet CS, Sports CS, Slide Panorama  
• The Triple Self-timer cannot be used together with the following features.  
Movie, High Speed CS, Multi SR Zoom, Child High Speed Movie, Pet High Speed  
Movie, Sports High Speed Movie, High Speed Best Selection, For YouTube  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
86  
 
Reducing the Effects of Camera and Subject Movement  
(Anti Shake)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Anti Shake  
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject  
movement or camera movement when shooting a moving subject using telephoto,  
when shooting a fast-moving subject, or when shooting under dim lighting conditions.  
D
F
Off  
Auto  
Minimizes the effects of hand and subject movement.  
Half-pressing the shutter button demonstrates the effect of Anti  
Shake. However, the image is not recorded.  
DEMO  
Turns off Anti Shake settings  
NOTE  
• Only camera shake correction can be used during FHD and STD movie recording.  
• Camera shake correction is not supported during High Speed Movie recording.  
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen  
when you half-press the shutter button while “DAuto” is selected. These values  
will appear briefly, however, in the preview image that is displayed immediately  
after you shoot a snapshot.  
• Shooting while “DAuto” is selected can cause an image to appear somewhat  
coarser than normal and can cause slight deterioration of image resolution.  
• Anti Shake may not be able to eliminate the effects of camera or subject movement  
when movement is severe.  
• Anti Shake may not work properly when the camera is mounted on a tripod. Turn  
off Anti Shake.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
87  
 
Specifying the Auto Focus Area (AF Area)  
Procedure  
[r] (REC) *[MENU] *REC Tab *AF Area  
You can use the following procedure to change the Auto Focus metering area for  
shooting snapshots.  
• When recording movies, the AF metering area is always “ÍSpot”.  
The camera automatically determines the focus point on the  
Ò
Intelligent screen and focuses there (intelligent AF).  
• Face detection (page 89) operates automatically.  
This mode takes readings of a small area in the center of the  
Spot  
Í
Ë
image. This setting works well with focus lock (page 85).  
When you half-press the shutter button while this setting is  
Tracking  
selected, the focus frame will follow the movement of the subject.  
ÍSpot” or “ËTracking”  
ÒIntelligent”  
Focus frame  
Focus frame  
• “ËTracking” cannot be used in combination with the following features.  
Some HS BEST SHOT scenes (except “Auto”)  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
88  
   
Using the Auto Focus Assist Light (AF Assist Light)  
Procedure  
[r] (REC) *[MENU] *REC Tab *AF Assist Light  
Half-pressing the shutter button while this setting is selected  
causes the front lamp to light, which provides illumination for  
focusing in areas where lighting is dim. Leaving this function  
turned off is recommended when shooting portraits from short  
distances, etc.  
Front lamp  
IMPORTANT!  
• Never look directly into the front lamp while it is lit.  
• Make sure your finger is not covering the front lamp.  
Shooting with Face Detection (Face Detection)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Face Detection  
When shooting people, the face detection feature detects the faces of up to ten  
individuals and adjusts focus and brightness accordingly.  
1. Use [4] and [6] to select “On” and then press [SET].  
2. Point the camera at the subject(s).  
The camera will detect human faces and display a  
frame around each one.  
3. Half-press the shutter button.  
The camera will focus and the frames around the  
faces it focuses on will turn green.  
4. Press the shutter button the rest of the way down.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
89  
   
Tips for Best Face Detection Results  
• The camera performs center focus if it cannot detect a face.  
• Always make sure that Auto Focus (AF) is selected as the focus mode when  
shooting with face detection.  
• Detection of the following types of faces is not supported.  
– A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade  
– A profile or a face that is at an angle  
– A face that is very far away and small, or very close and large  
– A face in an area that is very dark  
– A face of a pet or some other non-human subject  
IMPORTANT!  
• Face detection cannot be used in combination with any of the following features.  
– Some Single Shot mode BEST SHOT scenes (For YouTube, Prerecord (Movie))  
– Some HS BEST SHOT scenes (except “Auto”)  
– Movie Mode (Including some BEST SHOT scenes that support High Speed  
Movie recording)  
– High Speed CS with Prerecord CS (Including some BEST SHOT scenes that  
support High Speed CS recording)  
• The “Focus” setting is always fixed at Q(Auto Focus) whenever “Face Detection”  
is being used. If you want to change the “Focus” setting, first select “Off” for “Face  
Detection”.  
Shooting with Continuous Auto Focus (Continuous AF)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Continuous AF  
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is  
performed and focusing is continually updated until you half-press the shutter button.  
• Before you half-press the shutter button, the camera focuses at the center of the  
screen.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B
90  
 
Turning Digital Zoom On or Off (Digital Zoom)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Digital Zoom  
Select “On” when you want to use digital zoom (page 43).  
• Digital zoom is disabled while shooting with the following feature.  
– High speed movie recording  
Assigning Functions to the [4] and [6] Keys (L/R Key)  
Procedure  
[r] (REC) *[MENU] *REC Tab *L/R Key  
You can assign one of the seven functions listed below to the [4] and [6] keys.  
Setting  
[4]/[6] key operation  
Selecting a Focus Mode (page 83)  
W(Manual Focus) cannot be selected.  
Q*´*)  
Metering  
Self-timer  
Face Detection  
ISO  
Changes the Metering Mode (page 95)  
Sets the self-timer time (page 86)  
Turns face detection on and off (page 89)  
Adjusting White Balance (page 38)  
Correcting Image Brightness (page 39)  
Cancels [4] and [6] key assignments  
White Balance  
EV Shift  
Off  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
91  
     
Displaying the On-screen Grid (Grid)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Grid  
The on-screen grid can be displayed on the REC mode  
monitor screen for easy vertical and horizontal alignment  
when composing images.  
Turning on Image Review (Review)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Review  
While Review is turned on, the camera will display a image for about one second  
immediately after you press the shutter button to record it.  
• Image review is available only when shooting single images. It does not work with  
continuous shutter.  
Using Icon Help (Icon Help)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Icon Help  
While Icon Help is turned on, a textual description will appear on the display for  
certain icons when you switch between REC functions.  
Functions Supported by Icon Help  
• Recording mode  
• Available options for the “L/R Key” setting  
• Exposure warning when shutter button is half-pressed  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
92  
     
Configuring Power On Default Settings (Memory)  
Procedure  
[r] (REC) *[MENU] *REC Tab *Memory  
This setting lets you specify which camera settings should be remembered by the  
camera when it is turned off, and restored the next time the camera is turned on. To  
have the camera remember a setting, you should enable the setting’s memory. Any  
setting whose memory is disabled will be reset to its initial default any time the  
camera is turned off.  
Setting  
Disabled (Initial Default Setting)  
Enabled  
HS BEST SHOT  
BEST SHOT  
Flash  
Auto  
Auto  
Auto  
Focus  
Q(Auto Focus)  
ISO  
Auto  
White Balance  
EV Shift  
Auto WB  
0.0  
Setting at  
power off  
AF Area  
Spot  
Metering  
Multi  
Self-timer  
Flash Intensity  
Zoom (SR)  
Digital Zoom  
MF Position  
Zoom Position*  
Off  
0
Single  
On  
Position before manual focus was selected.  
Full wide  
* Optical zoom setting only.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
93  
 
Image Quality Settings (Quality)  
Specifying Snapshot Image Quality (TQuality (Snapshot))  
Procedure  
[r] (REC) *[MENU] *Quality Tab *TQuality (Snapshot)  
Fine  
Gives image quality priority  
Normal  
Normal  
• The “Fine” setting helps to bring out details when shooting dense tree branches or  
leaves, a complex pattern, etc.  
• Memory capacity (the number of images you can record) will be affected by the  
quality settings you configure (page 185).  
Movie Image Quality Settings (»Quality (Movie))  
Procedure  
[r] (REC) *[MENU] *Quality Tab *»Quality (Movie)  
This setting can be used to configure movie image quality settings and to select either  
normal movie recording or High Speed Movie recording.  
Select this setting record high-definition (FHD) movies (page 57). The  
aspect ratio of movies recorded with this setting is 16:9.  
FHD  
Use this setting for standard movie recording. Recording with this  
setting is performed using an aspect ratio of 4:3, an image size of  
640 480 pixels, and a frame rate of 30 frames per second. Image  
STD  
x
quality and image size settings cannot be changed (page 54).  
HS480  
HS240  
HS30-240  
The image size of movies recorded with this mode depends on the  
frame rate (recording speed (page 57)).  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
94  
     
Specifying the Metering Mode (Metering)  
Procedure  
[r] (REC) *[MENU] *Quality Tab *Metering  
The metering mode determines what part of the subject is metered for exposure.  
Multi-pattern metering divides the image into sections and measures  
the light in each section for a balanced exposure reading. This type  
of metering provides error-free exposure settings for a wide range of  
shooting conditions.  
B
Multi  
Center weighted metering concentrates on the center of the focus  
area to measure light. This type of metering is best when you want  
some level of control over contrast.  
N
Weighted  
Center  
Spot metering takes readings at a very small area. Use this metering  
method when you want exposure to be set according to the  
brightness of a particular subject, without being affected by  
surrounding conditions.  
˜
Spot  
Optimizing Image Brightness (Lighting)  
Procedure  
[r] (REC) *[MENU] *Quality Tab *Lighting  
You can use this setting to optimize the balance between bright areas and dark areas  
when shooting images.  
Performs brightness correction. When this option is selected, it takes  
longer for the image to be stored after the shutter button is pressed.  
On  
Off  
Does not perform brightness correction.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
95  
     
Specifying Flash Intensity (Flash Intensity)  
Procedure  
[r] (REC) *[MENU] *Quality Tab *Flash Intensity  
You can specify flash intensity to one of five levels from +2 (brightest flash) to –2  
(least bright flash).  
• Flash intensity may not change when the subject is too far away or too close.  
Using Built-in Color Filters (Color Filter)  
Procedure  
[r] (REC) *[MENU] *Quality Tab *Color Filter  
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple  
Controlling Image Sharpness (Sharpness)  
Procedure  
[r] (REC) *[MENU] *Quality Tab *Sharpness  
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).  
Controlling Color Saturation (Saturation)  
Procedure  
[r] (REC) *[MENU] *Quality Tab *Saturation  
You can specify one of five saturation settings from +2 (most saturated) to –2 (least  
saturated).  
Adjusting Image Contrast (Contrast)  
Procedure  
[r] (REC) *[MENU] *Quality Tab *Contrast  
You can specify one of five contrast settings from +2 (most contrast between light and  
dark) to –2 (least contrast between light and dark).  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
96  
         
Viewing Snapshots and Movies  
Viewing Snapshots  
See page 28 for the procedure for viewing snapshots.  
Viewing a Movie  
1. Press [p] (PLAY) and then use [4] and [6] to display the movie you  
want to view.  
2. Press [SET] to start playback.  
Movie icon: »  
Recording time  
Image quality  
Movie Playback Controls  
[4] [6] (Playback in progress.)  
Fast forward/fast  
reverse  
• Each press of either button increases the speed of the  
fast forward or fast reverse operation.  
• To return to normal playback speed, press [2].  
Play/pause  
[SET]  
1 frame forward/  
back  
[4] [6] (Playback paused.)  
• Holding down either button scrolls continuously.  
Press [2] and then press [8] [2]  
• Volume can be adjusted only while movie playback is in  
progress.  
Volume adjustment  
Information display  
on/off  
[8] (DISP)  
Slide the zoom controller in the direction of z([).  
• You can use [8], [2], [4], and [6] to scroll the zoomed  
image on the monitor screen. You can zoom a movie  
image up to 4.5 times normal size.  
Zoom  
Stop playback  
[MENU]  
• Playback may not be possible for movies not recorded with this camera.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
97  
       
Viewing a Panorama Image  
1. Press [p] (PLAY), and then use [4] and [6] to  
display the panorama images you want to  
view.  
2. Press [SET] to start playback of the panorama.  
Panorama playback causes the image to scroll left,  
right, up, or down.  
Playback Controls  
To start or pause  
[SET]  
playback  
[4] [6] (When the slide direction is left or right.)  
[8] [2] (When the slide direction is up or down.)  
• Holding down any button scrolls continuously.  
To advance scroll  
while paused  
To hide or show  
display information  
[8] (DISP)  
To stop playback  
[MENU]  
• The following functions cannot be performed on a panorama image.  
Dynamic Photo, Movie Converter, MOTION PRINT, Movie Editing, Trimming,  
Resize, Lighting, White Balance, Brightness, Rotation  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
98  
 
Viewing Continuous Shutter Images  
Each time you perform a continuous shutter (CS) operation, the camera creates a CS  
group that includes all of the images for that particular CS session. You can use the  
following procedure to play back the images in a particular CS group.  
1. Press [p] (PLAY) and then use [4] and [6] to display the CS group  
whose images you want to view.  
Number of image files in  
the CS group  
CS group icon  
First image in the CS group  
2. About one second after you select a CS group, high speed playback of  
its images will start automatically.  
• After playback of a CS Group is complete, the first image of the group will be  
displayed on the monitor screen.  
• Pressing [SET] will pause playback. While playback is paused, you can adjust  
the playback speed, specify the playback direction, scroll forward or back,  
zoom images, and delete images.  
Current image number/number  
of images in the group  
CS speed  
Playback guide  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
99  
   
The following are operations that are supported after you press [SET] to  
start image playback.  
During playback, changes the playback direction and playback speed.  
While playback is paused, scrolls forward or back.  
• Playback speed cannot be adjusted while the displayed image is  
[4] [6]  
zoomed.  
[SET]  
Toggles between pause and play.  
Zooms the image.  
• You can use [8], [2], [4], and [6] to scroll the zoomed image on  
the monitor screen.  
• Sliding the zoom controller towards w(]) while an image is not  
zoomed will display a menu of images in the current CS group.  
Zoom  
controller  
[MENU]  
Exits CS group playback.  
[8] (DISP) Cycles through information display formats.  
[2] Displays the “CS Frame Edit” menu.  
Deleting Continuous Shutter Images  
You can use the following procedures to delete images while playback is in progress  
or paused.  
. Deleting a Specific CS Group File  
1. While CS image playback is in progress or paused (toggle by pressing  
[SET]), press [2].  
This will display the “CS Frame Edit” menu.  
2. Use [8] and [2] to select “Delete” and then press [SET].  
3. Use [4] and [6] to display the image you want to delete.  
4. Use [8] and [2] to select “Delete” and then press [SET].  
• To delete other files, repeat steps 3 and 4.  
• To exit the delete operation, press [MENU].  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
100  
   
. Deleting Multiple Files in a CS Group  
1. While CS image playback is in progress or paused (toggle by pressing  
[SET]), press [2].  
This will display the “CS Frame Edit” menu.  
2. Use [8] and [2] to select “Delete” and then press [SET].  
3. Use [8] and [2] to select “Delete Frames” and then press [SET].  
• This displays a file selection screen.  
4. Use [8], [2], [4], and [6] to move the selection boundary to the file  
you want to delete, and then press [SET].  
• This will select the check box of the currently selected file.  
5. Repeat step 4 to select other files, if you want. After you are finished  
selecting files, press [MENU].  
6. Use [8] and [2] to select “Yes” and then press [SET].  
• This deletes the files you selected.  
• To cancel the delete operation, select “No” in step 6 and then press [SET].  
. Deleting All Files in a CS Group  
1. While CS image playback is in progress or paused (toggle by pressing  
[SET]), press [2].  
This will display the “CS Frame Edit” menu.  
2. Use [8] and [2] to select “Delete” and then press [SET].  
3. Use [8] and [2] to select “Del Group Images” and then press [SET].  
4. Use [8] and [2] to select “Yes”, and then press [SET].  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
101  
Dividing Up a CS Group  
Use the following to divide up a CS Group into individual images.  
. Dividing Up a Specific CS Group  
1. While a CS group is displayed or while the images of a CS group are  
scrolling on the monitor screen, press [MENU].  
2. Use [4] and [6] to select the “PLAY” tab.  
3. Use [8] and [2] to select “Divide Group” and then press [6].  
4. Use [4] and [6] to display the CS group you want to divide up.  
5. Use [8] and [2] to select “Divide” and then press [SET].  
• To divide up other CS group files, repeat steps 4 and 5.  
. Dividing Up All CS Groups  
IMPORTANT!  
• Once a CS group is divided, it cannot be regrouped.  
1. While a CS group is displayed or while the images of a CS group are  
scrolling on the monitor screen, press [MENU].  
2. Use [4] and [6] to select the “PLAY” tab.  
3. Use [8] and [2] to select “Divide Group” and then press [6].  
4. Use [8] and [2] to select “Divide All Groups” and then press [SET].  
5. Use [8] and [2] to select “Yes”, and then press [SET].  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
102  
 
Copying a CS Group Image  
Use the following procedure to copy an image in a CS group to a location outside of  
the group.  
1. While CS image playback is in progress or paused (toggle by pressing  
[SET]), press [2].  
This will display the “CS Frame Edit” menu.  
2. Use [8] and [2] to select “Copy”, and then press [SET].  
3. Use [4] and [6] to display the image you want to copy.  
4. Use [8] and [2] to select “Copy”, and then press [SET].  
NOTE  
• The functions below cannot be performed on snapshots inside a CS group. Before  
using either of these functions, perform the above procedure to copy the image  
first.  
White Balance, Brightness, Trimming, Rotation, Resize  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
103  
 
Zooming an On-screen Image  
1. In the PLAY mode, use [4] and [6] to scroll through the images until  
the one you want is displayed.  
2. Slide the zoom controller towards z([) to  
Zoom factor  
zoom.  
Image area  
You can use [8], [2], [4], and [6] to scroll the zoomed  
image on the monitor screen. Slide the zoom controller  
towards wto unzoom the image.  
– When monitor screen contents are turned on, a  
graphic in the lower right corner of the screen  
shows what part of the zoomed image is currently  
displayed.  
– To exit the zoom screen, press [MENU].  
– Though the maximum image zoom factor is 8X,  
certain image sizes may not allow zooming up to  
the full 8X.  
Current display area  
• Pressing [SET] will lock the current zoom factor for the on-screen image. You  
can then use [4] and [6] to scroll between images, using the same zoom  
factor. Pressing [SET] again will unlock the zoom factor and allow you to use  
[8], [2], [4] and [6] to move around the currently displayed images. This  
function cannot be used while viewing CS group images or movies. Also, CS  
group images and movies will not appear when you are scrolling images with  
[4] and [6].  
Displaying the Image Menu  
1. In the PLAY mode, slide the zoom controller  
Boundary  
towards w(]).  
Use [8], [2], [4] and [6] to move the selection  
boundary around the image menu.  
To view a particular image, use [8], [2], [4], or [6] to  
move the selection boundary to the image you want and  
then press [SET].  
• In the case of a movie or a continuous shutter (CS)  
file, the first frame of the file will be displayed.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
104  
     
Viewing Snapshots and Movies on a TV Screen  
1. Use the AV cable that comes with the camera to connect it to the TV.  
AV cable (bundled)  
Yellow  
White  
Red  
Terminal cover  
[USB/AV] port  
Video  
Audio  
TV  
AUDIO IN jack (red)  
AUDIO IN jack (white)  
VIDEO IN jack (yellow)  
Making sure that the 6mark on the camera is  
aligned with the 4mark of the AV cable connector,  
connect the cable to the camera.  
• Make sure that you insert the cable connector into the USB/AV port until you  
feel it click securely into place. Failure to insert the connector fully can result in  
poor communication or malfunction.  
• Note that even while the connector is fully inserted, you  
still will be able to see the metal part of the connector as  
shown in the illustration.  
• Make sure that the camera is turned off before plugging  
in or unplugging the cable. Check the user  
documentation that comes with the TV for information  
about requirements before plugging into or unplugging  
from the TV.  
2. Turn on the TV and select its video input mode.  
If the TV has more than one video input, select the one where the camera is  
connected.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
105  
     
3. Press [p] (PLAY) to turn on the camera.  
This will cause an image to appear on the TV screen, without anything appearing  
on the camera’s monitor screen.  
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the  
AV cable is connected.  
• You also can change the aspect ratio of the screen and the video output  
system (page 158).  
4. Now you can display images and play back movies as you normally do.  
IMPORTANT!  
• Before connecting to a TV to display images, be sure to configure the camera’s  
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 157).  
• Audio is initially output by the camera at maximum volume. When you first start  
displaying images, set the TV volume control at a relatively low level and then  
adjust it as required.  
NOTE  
• Audio is stereo.  
• Some TVs may not be able to output images and/or audio correctly.  
• All icons and indicators that appear on the monitor screen also appear on the TV  
screen. You can use [8] (DISP) to change the display contents.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
106  
Viewing High-quality Movies on a Hi-Vision Television  
Use a commercially available HDMI cable to  
connect the camera to the TV. For information  
about playback, see the procedure starting  
• Use a commercially available HDMI cable that is marked with the logo shown to the  
right.  
HDMI connector  
HDMI input  
HDMI cable (commercially available)  
HDMI output  
(Mini)  
HDMI mini connector  
Terminal cover  
IMPORTANT!  
• Output to a TV is not supported while the camera is in the REC mode.  
NOTE  
• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini  
connector on one end, and a plug that is compatible with your TV’s HDMI  
connector on the other end.  
• Proper image and/or audio output and other operations may not be possible with  
some devices.  
• Connecting the camera to the HDMI connector of another device can damage both  
the camera and the other device. Never connect two HDMI output connectors to  
each other.  
• Make sure that the camera is turned off before plugging in or unplugging the cable.  
Check the user documentation that comes with the TV for information about  
requirements before plugging into or unplugging from the TV.  
• When cables are connected to both the USB/AV port and the HDMI output  
connector, the HDMI output connector connection is given priority.  
• Disconnect the HDMI cable when you are not using HDMI output. The camera’s  
monitor screen may not operate normally while the HDMI cable is connected.  
• Audio is stereo.  
• Some TVs may not be able to output images and/or audio correctly.  
• Audio is initially output by the camera at maximum volume. When you first start  
displaying images, set the TV volume control at a relatively low level and then  
adjust it as required.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
107  
     
. Selecting the HDMI Terminal Output Method (HDMI Output)  
Procedure  
[MENU] *Set Up Tab *HDMI Output  
Use this setting to select the digital signal format when connecting to a TV with an  
HDMI cable.  
This setting will cause the format to change automatically in accordance  
with the connected TV. Normally, you should use this mode.  
Auto  
1080i  
480p  
576p  
1080i format output*  
480p format output  
576p format output  
* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output  
method may be 576p when outputting to a digital TV in a PAL reception area that does  
not support 1080i 60i. If you are in a PAL reception area and nothing is displayed  
automatically, change the setting to 576p.  
• If an image does not appear when “Auto” is selected as the output method, try  
changing this setting to something else.  
IMPORTANT!  
• The “HDMI Output” setting cannot be changed as long as there is an HDMI cable  
connection between the camera and a TV. Disconnect the HDMI cable from the  
camera to change the “HDMI Output” setting.  
Recording Camera Images to a DVD Recorder or Video Deck  
Use the following method to connect the camera to the recording device using the  
camera’s bundled AV cable.  
– DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN  
terminals.  
– Camera: Connect the AV cable to the USB/AV port.  
You can play a slideshow of snapshots and movies on the camera and record it on a  
DVD or video tape. You can record movies by selecting “»Only” for the slideshow  
“Images” setting (page 109).  
For information about connecting a monitor to the recording device and about how to  
record, see the user documentation that comes with the recording device you are  
using.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B
108  
 
Other Playback Functions (PLAY)  
This section explains menu items that you can use to configure settings and perform  
other playback operations.  
For information about menu operations, see page 81.  
Playing a Slideshow on the Camera (Slideshow)  
Procedure  
[p] (PLAY) *[MENU] *PLAY Tab *Slideshow  
Start  
Starts the slideshow  
Images  
Specifies the type of images to be included in the slideshow  
All images: Snapshots, movies, continuous shutter images  
Z
All images except  
T
: All non-continuous shutter (CS) images  
Only: Snapshots only  
»Only: Movies only  
Time  
Time from the start to the end of the slideshow  
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes  
Interval  
Amount of time each image remains displayed  
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.  
If you specify a value from 1 to 30 seconds, movies play from beginning to end.  
When the slideshow reaches a movie file while “MAX” is selected, only the first  
frame of the movie will be displayed.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
109  
     
Effect  
Select the effect you want.  
Pattern 1 to 5: Plays background music and applies an image change effect.  
• Patterns 2 through 4 have different background music, but they all use the  
same image change effect.  
• Pattern 5 can be used for playback of snapshots only (except for those that  
are part of a CS group), and the “Interval” setting is ignored.  
• Movies that include audio are played back without background music. Movies  
that do not include audio are played back with background music.  
• The currently selected image change effect setting is disabled automatically  
in following cases.  
– When playing a slideshow for which “»Only” is selected for the “Images”  
setting  
– When the interval setting is “MAX”, 1 second, or 2 seconds  
– Before and after playback of a movie  
– During CS group playback (Except the Pattern 1 effect)  
Off: No image change effect or background music  
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the  
slideshow and returns to the menu screen.  
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.  
• All button operations are disabled while the slideshow is transitioning from one  
image to another.  
• The time required for transition from one image to another may be longer in the  
case of an image that was not recorded with this camera.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
110  
Transferring Music from Your Computer to Camera Memory  
You can replace the built-in slideshow background music with other music from your  
computer.  
Supported File Types:  
• PCM format (16-bit, monaural / stereo) WAV files  
• Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz  
Number of Files: 9  
File names: SSBGM001.WAV to SSBGM009.WAV  
• Create the music files on your computer using the above names.  
• Regardless of which effect pattern you select, the music files you store in camera  
memory are played back in name sequence.  
1. Connect the camera to your computer (pages 134, 143).  
If you plan to save the music files to the camera’s memory card, make sure the  
card is loaded in the camera.  
2. Perform one of the following operations to open the memory card or  
built-in memory.  
This will cause the camera to be recognized by your computer as a Removable  
Disk (Drive).  
• Windows  
Windows 7 / Windows Vista: Start *Computer  
Windows XP: Start *My Computer  
1
Windows 2000: Double-click “My Computer”.  
Double-click “Removable Disk”.  
• Macintosh  
2
Double-click the camera’s drive icon.  
1
3. Create a folder named “SSBGM”.  
4. Double-click the “SSBGM” folder you created and copy the  
background music file to it.  
• See the user documentation that comes with your computer for information  
about moving, copying, and deleting files.  
• If there are background music files both in built-in memory and on the memory  
card loaded in the camera, the files on the memory card take priority.  
• See page 149 for information about camera folders.  
5. Disconnect the camera from the computer (pages 136, 145).  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
111  
 
Creating a Snapshot of Movie Frames (MOTION PRINT)  
Procedure  
[p] (PLAY) *Movie Screen *[MENU] *PLAY Tab *  
MOTION PRINT  
1. Use [4] and [6] to scroll through the movie frames and display the one  
you want to use as the image of the MOTION PRINT image.  
Holding down [4] or [6] scrolls at high speed.  
2. Use [8] and [2] to select “Create” and then press [SET].  
• Only the frames of movies recorded on this camera can be used in a MOTION  
PRINT image.  
Editing a Movie on the Camera (Movie Editing)  
Procedure  
[p] (PLAY) *Movie Screen of Movie to be Edited *[MENU] *  
PLAY Tab *Movie Editing  
The Movie Editing feature lets you use one of the following procedures to edit out a  
specific part of a movie.  
}
(To-Point Cut)  
Cut  
Cuts everything from the beginning of the movie up to the  
current location.  
~
Cut  
(Point-To-Point Cut)  
Cuts everything between two points.  
¡
Cut  
(From-Point Cut)  
Cuts everything from the current location to the end of the  
movie.  
1. Use [8] and [2] to select the editing method you want to use and then  
press [SET].  
2. Use the following operations to select the frame  
(point) from which or to which you want to cut  
the movie (the cut point).  
During playback, changes the playback  
[4] [6] direction and playback speed. While  
playback is paused, scrolls forward or back.  
Cut range (yellow)  
[SET]  
Toggles between pause and play.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
112  
   
3. Press [2] to display the editing menu and specify one or two cut  
points.  
}
Cut  
(To-Point Cut)  
While the frame you want the cut to be up to is  
displayed, press [2].  
While the frame you want the first (From) cut to be is  
displayed, press [2].  
1
~
Cut  
(Point-To-Point Cut)  
Select another frame.  
While the frame you want the second (To) cut to be  
is displayed, press [2].  
2
3
¡
Cut  
(From-Point Cut)  
While the frame you want the cut to be from is  
displayed, press [2].  
4. Use [8] and [2] to select “Yes” and then press [SET].  
The selected cut operation will take considerable time to complete. Don’t try to  
perform any camera operation until the “Busy... Please wait...” message  
disappears from the monitor screen. Note that a cut operation can take a long  
time if the movie being edited is long.  
IMPORTANT!  
• When you edit a movie, only the result is saved. The original movie is not retained.  
An editing operation cannot be undone.  
NOTE  
• A movie that is shorter than five seconds cannot be edited.  
• Editing of movies recorded with a different type of camera is not supported.  
• You will not be able to edit a movie if the amount of remaining memory capacity is  
less than the size of the movie file you want to edit. If there is not enough memory  
available, delete files you no longer need to free up more.  
• Splitting of a movie into two movies and splicing of two different movies into a  
single movie are not supported.  
• You also can start a movie editing operation while the movie you want to edit is  
playing back. When playback reaches a frame where you want a cut point to be,  
press [SET] to pause playback. Next, press [2] to display the menu of editing  
options. Perform editing using the same procedures as described above.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
113  
Optimizing Image Brightness (Lighting)  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *Lighting  
You can use this setting to optimize the balance between bright areas and dark areas  
in existing images.  
+2  
Performs a higher level of brightness correction than the “+1” setting.  
Performs brightness correction.  
+1  
Cancel  
Does not perform brightness correction.  
NOTE  
• Correcting the lighting when shooting produces better results (page 95).  
• Altering the lighting of an image causes the original image and the new (altered)  
version to be stored as separate files.  
• When you display an altered image on the camera’s monitor screen, the date and  
time indicates when the image was originally recorded, not when the image was  
altered.  
Adjusting White Balance (White Balance)  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *  
White Balance  
You can use the white balance setting to select a light source type for a recorded  
image, which will affect the colors of the image.  
¤
'
Daylight  
Overcast  
Shade  
Outdoors, fair weather  
Outdoors, cloudy to rain, in tree shade, etc.  
Very high temperature light, such as building shade, etc.  
Day White  
Fluorescent  
White or day white fluorescent lighting, without suppressing  
color cast  
Daylight  
Fluorescent  
Daylight fluorescent lighting, while suppressing color cast  
«
Tungsten  
Suppressing of the appearance of light bulb lighting  
No white balance adjustment  
Cancel  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
114  
     
NOTE  
• You also can adjust the white balance when recording images (page 38).  
• The original snapshot is retained in memory and not deleted.  
• When you display an altered image on the camera’s monitor screen, the date and  
time indicates when the image was originally recorded, not when the image was  
altered.  
Adjusting the Brightness of an Existing Snapshot  
(Brightness)  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *  
Brightness  
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).  
NOTE  
• The original snapshot is retained in memory and not deleted.  
• When you display an altered image on the camera’s monitor screen, the date and  
time indicates when the image was originally recorded, not when the image was  
altered.  
Selecting Images for Printing (DPOF Printing)  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *  
DPOF Printing  
See page 127 for details.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
115  
   
Protecting a File Against Deletion (Protect)  
Procedure  
[p] (PLAY) *[MENU] *PLAY Tab *Protect  
Protects specific files.  
Use [4] and [6] to scroll through the files  
until the one you want to protect is displayed.  
1
Use [8] and [2] to select “On” and then  
press [SET].  
2
On  
An image that is protected is indicated by the  
icon.  
To protect other files, repeat steps 1 and 2.  
To exit the protect operation, press [MENU]. To unprotect a file, select  
“Off” instead of “On” in step 2 above.  
3
Protects all files.  
Use [8] and [2] to select “All Files: On” and then press [SET].  
Press [MENU].  
To unprotect all files, select “All Files: Off” instead of “All Files: On” in  
step 1 above.  
1
2
All Files:  
On  
IMPORTANT!  
• Note that even if a file is protected, it will be deleted if you perform the format  
operation (page 160).  
NOTE  
• Performing the above procedure while a CS group is displayed will protect all the  
images in the CS group. You can protect individual images in a CS group by  
performing the above procedure while the image is displayed.  
. To protect a specific image in a CS group  
1. While CS image playback is in progress or paused (toggle by pressing  
[SET]), press [2].  
This will display the “CS Frame Edit” menu.  
2. Use [8] and [2] to select “Protect” and then press [SET].  
3. Use [4] and [6] to scroll through images until one you want to protect  
is displayed.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
116  
     
4. Use [8] and [2] to select “On” and then press [SET].  
This will protect the image and display the icon.  
• To unprotect an image, select “Off” in step 4 and then press [SET].  
5. After you are finished, select “Cancel” and then press [SET] to exit this  
operation.  
NOTE  
• Note that even if a file is protected, it will be deleted if you perform the format  
operation (page 160).  
. To protect all the images in a CS group  
1. While a CS group is displayed or while the images of a CS group are  
scrolling on the monitor screen, press [MENU].  
2. Use [4] and [6] to select the “PLAY” tab.  
3. Use [8] and [2] to select “Protect” and then press [SET].  
4. Use [4] and [6] to display the CS group you want to protect.  
5. Use [8] and [2] to select “On” and then press [SET].  
This will protect all the images in the group and display the icon.  
• To unprotect all of the images in the group, select “Off” in step 5 and then press  
[SET].  
6. Press [MENU].  
NOTE  
• Note that even if a file is protected, it will be deleted if you perform the format  
operation (page 160).  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
117  
Rotating an Image (Rotation)  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *Rotation  
1. Use [8] and [2] to select “Rotation” and then press [SET].  
Each press of [SET] will rotate the displayed image 90 degrees left.  
2. When the displayed image is at the orientation you want, press  
[MENU].  
NOTE  
• Rotating a CS image causes all of the images in the CS group to be rotated. You  
cannot rotate individual component image in a CS group.  
• Rotation of a panorama image is not supported.  
• Note that this procedure does not actually change the image data. It simply alters  
how the image is displayed on the camera’s monitor screen.  
• An image that has been protected or zoomed cannot be rotated.  
• The original (unrotated) version of the image will be displayed on the image menu  
screen.  
Resizing a Snapshot (Resize)  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *Resize  
You can reduce the size of a snapshot and save the result as a separate snapshot.  
The original snapshot is also retained. You can resize an image to one of three sizes:  
8M, 5M, VGA.  
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of  
4:3, with both sides cut off.  
• The recording date of the resized version of the snapshot will be the same as the  
recording date of the original snapshot.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
118  
     
Cropping a Snapshot (Trimming)  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *Trimming  
You can crop a snapshot to trim parts you do not need, and  
save the result in a separate file. The original snapshot is  
also retained.  
Zoom factor  
Represents  
snapshot area  
Use the zoom controller to zoom the image to the size you  
want, use [8], [2], [4], and [6] to display the portion of  
the image you want to cut out, and then press [SET].  
• The image produced by cropping a 3:2 or 16:9 image will  
have an aspect ratio of 4:3.  
• The recording date of the cropped image will be the  
same as the recording date of the original snapshot.  
Part of snapshot that is  
currently displayed  
Copying Files (Copy)  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *Copy  
Files can be copied from the camera’s built-in memory to a memory card or from a  
memory card to built-in memory.  
Copies all files from built-in camera memory to a memory card.  
This option copies all the files in built-in camera memory. It cannot be  
used to copy a single file.  
Built-in *  
Card  
Copies a single file on the memory card to camera built-in camera  
memory. Files are copied to the folder in built-in memory whose  
name has the largest serial number.  
• You cannot copy a continuous shutter (CS) group image (page  
Card *  
Built-in  
Use [4] and [6] to select the file you want to copy.  
Use [8] and [2] to select “Copy” and then press [SET].  
1
2
NOTE  
• You can copy snapshots or movies you recorded with this camera.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
119  
     
Dividing Up a Continuous Shutter Group (Divide Group)  
Procedure  
[p] (PLAY) *[MENU] *PLAY Tab *Divide Group  
See page 102 for details.  
Combining CS Images into a Single Still Image  
(CS Multi Print)  
Procedure  
[p] (PLAY) *Display CS group. *[MENU] *PLAY Tab *  
CS Multi Print  
1. Use [8] and [2] to select “Create”.  
• You can use [4] and [6] to select a different CS group, if you want.  
2. Press [SET].  
x
This converts the CS group to a 12M (4000 3000) image with up to 30 CS  
x
frames (5 vertical 6 horizontal).  
• This camera may not be able to correctly convert a CS group image with  
another camera.  
• The recording date of the converted image will be the same as the recording  
date of the original CS group.  
• When converting a CS group whose images have been rotated by the  
“Rotation” feature to a CS Multi Print image, the arrangement of the images in  
the CS Multi Print will be different from that of normal (unrotated) CS images.  
Editing a CS Image (CS Frame Edit)  
Procedure  
[p] (PLAY) *[MENU] *PLAY Tab *CS Frame Edit  
See the following pages for details.  
DPOF Printing: page 128  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
120  
     
Dynamic Photo  
This camera comes with a number of subjects in built-in  
memory (“built-in subjects”), which you can insert into  
snapshots and movies to create Dynamic Photo images.  
• The term “built-in subjects” refers to the moving figures  
and characters that came pre-programmed in the  
camera’s built-in memory.  
Built-in Subject  
Another Image  
Dynamic Photo Image  
Inserting a Built-in Subject into a Snapshot or Movie  
(Dynamic Photo)  
Use the following procedure to insert a built-in subject image into a snapshot (except  
for a panorama image) or movie.  
Procedure  
[p] (PLAY) *[MENU] *PLAY Tab *Dynamic Photo  
1. Use [4] and [6] to select the background image you want and then  
press [SET].  
• Only an image that satisfies the following conditions can be used as a  
background image.  
– A snapshot or movie recorded with this camera or a snapshot transferred to  
this camera’s memory using Photo Transport (page 140)  
– A snapshot with an aspect ratio of 4:3  
2. Use [4] and [6] to select the built-in subject that you want to insert  
into the image and then press [SET].  
Download from Www.Somanuals.com. All Manuals Search And DownloDaydn.amic Photo  
121  
   
3. If you are inserting a subject into a movie an  
image will appear on the monitor screen  
showing the approximate location of the  
subject in the movie. Use [4] and [6] to shift  
the location to the position you want. After you  
are finished, press [SET].  
Insert location  
• If you insert a subject into a movie, the resulting movie will be a maximum of  
20 seconds long. Everything before and after the insertion is cut off. If the  
movie you are inserting into (original movie) is shorter than 20 seconds, the  
resulting movie will be the same length as the original movie.  
• If you are inserting a subject into a snapshot, skip directly to step 4.  
4. Use the zoom controller to adjust the size of the subject and use [8],  
[2], [4], and [6] to adjust its position.  
5. When everything is the way you want, press [SET].  
This inserts the subject into another image and creates a Dynamic Photo.  
• Inserting an animated subject into a snapshot will save a Dynamic Photo that  
consists of 20 still images of 2M size or smaller.  
• Inserting a subject into a movie will save the Dynamic Photo as a movie file.  
NOTE  
• Performing a delete or format operation will not delete the built-in subjects.  
• You can copy the built-in subjects to a memory card using the “Built-in *Card”  
copy operation (page 119).  
Download from Www.Somanuals.com. All Manuals Search And DownloDaydn.amic Photo  
122  
To view a Dynamic Photo (Dynamic Photo File)  
1. Press [p] (PLAY) and then use [4] and [6] to display the Dynamic  
Photo you want to view.  
2. If you want to see the subject in the Dynamic Photo movie, press [SET].  
The Dynamic Photo is repeated as a continuous loop.  
• Movement of the subject also will start automatically about two seconds after  
you display a Dynamic Photo.  
Converting a Dynamic Photo Still Image to a Movie  
(Movie Converter)  
A Dynamic Photo with a still image background and a moving subject is stored as a  
series of 20 still images. You can use the following procedure to convert the 20  
images that make up a Dynamic Photo to a movie.  
Procedure  
[p] (PLAY) *Dynamic Photo Screen *[MENU] *PLAY Tab *  
Movie Converter  
• The final movie format is H.264/AVC standard.  
x
• The final movie image size is 640 480 pixels.  
Download from Www.Somanuals.com. All Manuals Search And DownloDaydn.amic Photo  
123  
   
Printing  
Printing Snapshots  
Professional Print Service  
You can take a memory card that contains the images you want  
to print to a professional print service and have them printed.  
Printing on a Home Printer  
Printing Images on a Printer with Memory Card Slot  
You can use a printer equipped with a memory card slot to print  
images directly from a memory card. For details, see the user  
documentation that comes with your printer.  
Connecting Directly to a PictBridge Compatible  
Printer  
You can print on a printer that supports PictBridge (page  
Printing with a Computer  
After transferring the images to your computer, use  
commercially available software to print.  
• You can specify which images you want to print, the number of copies, and date  
stamp settings before printing (page 127).  
Connecting Directly to a PictBridge Compatible Printer  
You can connect the camera directly to a printer that supports PictBridge and print  
images without going through a computer.  
. To set up the camera before connecting to a printer  
1. Turn on the camera and press [MENU].  
2. On the “Set Up” tab, select “USB” and then press [6].  
3. Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
124  
       
. Connecting the Camera to a Printer  
Use the USB cable that comes bundled with the camera to connect the camera to  
your printer’s USB port.  
USB cable  
[USB/AV] port  
Large connector  
USB  
Small connector  
USB port  
Terminal cover  
Making sure that the 6mark on the camera is aligned  
with the 4mark of the USB cable connector, connect  
the cable to the camera.  
• The camera does not draw power over the USB cable. Check the battery level  
before connecting and make sure it is not too low.  
• Make sure that you insert the cable connector into the USB/AV port until you feel it  
click securely into place. Failure to insert the connector fully can result in poor  
communication or malfunction.  
• Note that even while the connector is fully inserted, you still  
will be able to see the metal part of the connector as shown  
in the illustration.  
• When connecting the USB cable to a USB port, make sure  
you align the connector correctly with the port.  
• Make sure that the camera is turned off before plugging in or  
unplugging the cable. Check the user documentation that  
comes with the printer for information about requirements  
before plugging into or unplugging from the printer.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
125  
   
. To print  
1. Turn on the printer and load paper.  
2. Turn on the camera.  
This will display the print menu screen.  
3. Use [8] and [2] to select “Paper Size”, and then press [6].  
4. Use [8] and [2] to select a paper size and then press [SET].  
• The following are the available paper sizes.  
x
x
x
x
3.5" 5", 5" 7", 4" 6", A4, 8.5" 11", By Printer  
• Selecting “By Printer” prints using a paper size selected on the printer.  
• See the documentation that comes with your printer for information about  
paper settings.  
5. Use [8] and [2] to specify the print option you want.  
1 Image  
: Prints one image. Select and then press [SET]. Next, use [4]  
and [6] to select the image you want to print.  
DPOF Printing: Prints multiple images. Select and then press [SET]. With this  
option, images will be printed in accordance with DPOF settings  
• To toggle date stamping on and off, slide the zoom controller. The date stamp  
will be printed when “On” is indicated on the monitor screen.  
6. Use [8] and [2] to select “Print” and then press [SET].  
Printing will start and the message “Busy... Please wait...” will appear on the  
monitor screen. The message will disappear after a short while, even though  
printing is still being performed. Pressing any camera button will cause the  
printing status to re-appear. The print menu screen will re-appear when printing is  
complete.  
• If you selected “1 Image”, you can repeat the procedure from step 5, if you  
want.  
7. After printing is complete, turn off the camera and disconnect the USB  
cable from the printer and camera.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
126  
Using DPOF to Specify Images to be Printed and the Number  
of Copies  
. Digital Print Order Format (DPOF)  
DPOF is a standard that allows you to include image type, number of copy,  
and time stamp on/off information on the memory card with the images.  
After configuring settings, you can use the memory card to print on a home  
printer that supports DPOF or take the memory card to a professional print  
service.  
• Whether or not you will be able to use DPOF settings for printing depends on the  
printer you are using.  
• Some professional print services may not support DPOF.  
. Configuring DPOF Settings Individually for Each Image  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *  
DPOF Printing *Select images  
1. Use [4] and [6] to scroll through the files until the image you want to  
print is displayed.  
2. Use [8] and [2] to specify the number of copies.  
You can specify a value up to 99. Specify 00 if you do not want to print the image.  
• If you want to date stamp the image, slide the zoom controller. This will cause  
“On” to be displayed, meaning the image will be date stamped.  
• Repeat steps 1 and 2 to configure settings for other images, if you want.  
3. Press [SET].  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
127  
   
. Configuring the Same DPOF Settings for All the Images  
Procedure  
[p] (PLAY) *Snapshot Screen *[MENU] *PLAY Tab *  
DPOF Printing *All images  
1. Use [8] and [2] to specify the number of copies.  
You can specify a value up to 99. Specify 00 if you do not want to print the image.  
• Note that the specified number of copies will be printed for all of the images in  
any CS group included with the images.  
• If you want to date stamp the image, slide the zoom controller. This will cause  
“On” to be displayed, meaning the image will be date stamped.  
2. Press [SET].  
NOTE  
• You can specify the number of copies for a specific image (page 128) or for all of  
the images in a CS group (page 129) by performing the above procedure while an  
image in the group is displayed.  
. To specify the number of copies for a specific image in a CS group  
1. While CS image playback is in progress or paused (toggle by pressing  
[SET]), press [2].  
This will display the “CS Frame Edit” menu.  
2. Use [8] and [2] to select “DPOF Printing” and then press [SET].  
3. Use [8] and [2] to select “Select images” and then press [SET].  
4. Use [4] and [6] to scroll through images until one you want to print is  
displayed.  
5. Use [8] and [2] to specify the number of copies.  
You can specify a value up to 99. Specify 00 if you do not want to print the image.  
• If you want to date stamp the image, slide the zoom controller. This will cause  
“On” to be displayed, meaning the image will be date stamped.  
• Repeat steps 4 and 5 to configure settings for other images, if you want.  
6. Press [SET].  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
128  
 
. To configure the same DPOF settings for all the images in a CS  
group  
1. While CS image playback is in progress or paused (toggle by pressing  
[SET]), press [2].  
This will display the “CS Frame Edit” menu.  
2. Use [8] and [2] to select “DPOF Printing” and then press [SET].  
3. Use [8] and [2] to select “Frame all” and then press [SET].  
4. Use [8] and [2] to specify the number of copies.  
You can specify a value up to 99. Specify 00 if you do not want to print the image.  
• If you want to date stamp the image, slide the zoom controller. This will cause  
“On” to be displayed, meaning the image will be date stamped.  
5. Press [SET].  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
129  
 
DPOF settings are not cleared automatically after printing is complete.  
The next DPOF print operation you execute will be performed using the last DPOF  
settings you configured for the images. To clear DPOF settings, specify “00” for the  
number of copies of all images.  
Tell your print service about your DPOF settings!  
If you take a memory card to a professional print service, be sure to tell them that it  
includes DPOF settings for the images to be printed and the number of copies. If you  
don’t, the print service may print all the images without regard to your DPOF settings,  
or they may ignore your date stamp setting.  
. Date Stamping  
You can use one of the following three methods to include the recording date in the  
printout of an image.  
Configuring camera settings  
Configure DPOF settings (page 127).  
You can turn date stamping on and off each time you print. You can configure  
settings so some images include the date stamp and some don’t.  
Configure the Camera’s Timestamp setting (page 154).  
• The camera’s Timestamp setting imprints the date into a snapshot when you  
shoot it, so the date is always included when you print. It cannot be deleted.  
• Do not turn on DPOF date stamping for an image that includes a date  
stamped with the camera’s Timestamp function. Doing so can cause the two  
stamps to be overprinted.  
Configuring computer settings  
You can use commercially available image management software to date  
stamp images.  
Professional print service  
Request date stamping when ordering prints from a professional print service.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
130  
 
. Standards Supported by the Camera  
• PictBridge  
This is a standard of the Camera and Imaging Products Association  
(CIPA). You can connect the camera directly to a printer that supports  
PictBridge, and perform image selection and printing using the  
camera monitor screen and controls.  
• PRINT Image Matching III  
Using image editing software and printing on a printer that supports  
PRINT Image Matching III makes it possible to use information about  
shooting conditions that is recorded with the image, and produce  
exactly the type of image you want. PRINT Image Matching and  
PRINT Image Matching III are trademarks of Seiko Epson Corporation.  
• Exif Print  
Printing on a printer that supports Exif Print uses information about  
shooting conditions recorded with the image to enhance printed  
image quality. Contact your printer manufacturer for information  
about models that support Exif Print, printer upgrades, etc.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
131  
Using the Camera with a Computer  
Things you can do using a computer...  
You can perform the operations described below while the camera is connected to a  
computer.  
Save images to a  
computer and view  
them there  
Save images and view them manually  
(USB connection) (pages 134, 143).  
Transfer images  
stored on your  
computer to  
In addition to images, you also can transfer  
screen shot images from your computer to  
the camera (Photo Transport*) (page 140).  
camera memory  
Play back and edit  
movies  
• You can play back movies (pages 138,  
that is compatible with your computer’s  
operating environment.  
• To edit movies, use commercially  
available software as required.  
* Windows only  
The procedures you need to perform when using the camera with your computer and  
when using the bundled software are different for Windows and the Macintosh.  
• Macintosh users should refer to “Using the Camera with a Macintosh” on page  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
132  
   
Using the Camera with a Windows Computer  
Install the required software in accordance with the version of Windows you are  
running and what you want to do.  
When you want to Operating System  
See  
page:  
Install this software:  
do this:  
Version  
Save images to a  
computer and view  
Windows 7, Windows  
Vista, Windows XP,  
Installation not required.  
them there manually Windows 2000  
Installation not required.  
• Windows Media Player 12,  
which is already installed  
on most computers, can be  
used for playback.  
Windows 7  
Play movies  
Movies can be played back  
using QuickTime 7.  
• You need to download  
QuickTime 7 on the Web if  
you want to use it.  
Windows Vista,  
Windows XP  
Windows 7, Windows  
Vista, Windows XP,  
Windows 2000  
Edit movies  
• Use commercial software  
as required.  
Windows 7, Windows  
Vista, Windows XP  
(SP2/SP3),  
Upload movie files  
to YouTube  
YouTube Uploader for  
CASIO*  
Windows 2000 (SP4)  
Windows 7, Windows  
Vista, Windows XP,  
Windows 2000  
Transfer images to  
the camera  
Photo Transport 1.0*  
Windows 7, Windows  
Vista, Windows XP  
(SP2/SP3), Windows  
2000 (SP4)  
Adobe Reader 9  
(Not required if already  
installed.)  
View the User’s  
Guide  
* YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of  
Windows OS.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
133  
 
. Computer System Requirements for Bundled Software  
Computer system requirements are different for each of the applications. See the  
“Read me” file that comes with each application for details. Information about  
computer system requirements also can be found under “Computer System  
. Precautions for Windows Users  
• Except for Adobe Reader, the bundled software requires Administrator privileges to  
run.  
• Operation under a dual-processor environment is not supported.  
• Operation may not be possible under certain computer environments.  
Viewing and Storing Images on a Computer  
You can connect the camera to your computer in order to view and store images  
(snapshot and movie files).  
. To connect the camera to your computer and save files  
1. Turn on the camera and press [MENU].  
2. On the “Set Up” tab, select “USB” and then press [6].  
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
134  
     
4. Turn off the camera and then use the USB cable that comes with the  
camera to connect it to your computer.  
USB port  
USB cable  
Large connector  
[USB/AV] port  
Small connector  
Terminal  
cover  
Making sure that the 6mark on the camera is aligned  
with the 4mark of the USB cable connector, connect  
the cable to the camera.  
• The camera does not draw power over the USB cable. Check the battery level  
before connecting and make sure it is not too low.  
• Make sure that you insert the cable connector into the USB/AV port until you  
feel it click securely into place. Failure to insert the connector fully can result in  
poor communication or malfunction.  
• Note that even while the connector is fully inserted, you  
still will be able to see the metal part of the connector as  
shown in the illustration.  
• When connecting the USB cable to a USB port, make  
sure you align the connector correctly with the port.  
• Your computer may not be able to recognize the  
camera if you connect via a USB hub. Always connect  
directly to the computer’s USB port.  
5. Turn on the camera.  
6. Windows 7 / Windows Vista users: Click “Start” and then “Computer”.  
Windows XP users: Click “Start” and then “My Computer”.  
Windows 2000 users: Double-click “My Computer”.  
7. Double-click “Removable Disk”.  
• Your computer recognizes the memory card loaded in the camera (or built-in  
memory if there is no card) as a removable disk.  
8. Right-click the “DCIM” folder.  
9. On the shortcut menu that appears, click “Copy”.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
135  
   
10. Windows 7 / Windows Vista users: Click “Start” and then  
“Documents”.  
Windows XP users: Click “Start” and then “My Documents”.  
Windows 2000 users: Double-click “My Documents” to open it.  
• If you already have a “DCIM” folder in “Documents” (Windows 7 / Windows  
Vista) or “My Documents” (Windows XP / Windows 2000), the next step will  
overwrite it. If you want to keep the existing “DCIM” folder, you need to change  
its name or move it to a different location before performing the next step.  
11. Windows 7 users: On the “Documents” “Organize” menu, select  
“Paste”.  
Windows Vista users: On the “Documents” “Edit” menu, select  
“Paste”.  
Windows XP / Windows 2000 users: On the “My Documents” “Edit”  
menu, select “Paste”.  
This will paste the “DCIM” folder (and all the image files it contains) into your  
“Documents” (Windows 7 / Windows Vista) or “My Documents” (Windows XP /  
Windows 2000) folder. You now have a copy of the files that are in camera  
memory on your computer.  
12. After you finish copying images, disconnect the camera from the  
computer.  
Windows 7, Windows Vista, Windows XP  
On the camera, press [ON/OFF] (Power) to turn off the camera. After making  
sure that the back lamp is unlit, disconnect the camera from the computer.  
Windows 2000  
Click card services in the task tray on your computer screen, and disable the  
drive number assigned to the camera. Next, after making sure that the back lamp  
is unlit, press the camera’s [ON/OFF] (Power) button to turn off the camera and  
disconnect the camera from your computer.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
136  
 
. To view images you copied to your computer  
1. Double-click the copied “DCIM” folder to open it.  
2. Double-click the folder that contains the images you want to view.  
3. Double-click the image file you want to view.  
• For information about file names, see “Memory Folder Structure” on page 149.  
• An image that was rotated on the camera will be displayed on your computer  
screen in its original (unrotated) orientation.  
• Viewing a CS image on a computer will individually display the component  
images in the CS group. A CS group cannot be viewed as a CS image on a  
computer.  
Never use your computer to modify, delete, move, or rename any image files  
that are in the camera’s built-in memory or on its memory card.  
Doing so can cause problems with the camera’s image management data, which  
will make it impossible to play back images on the camera and can drastically alter  
remaining memory capacity. Whenever you want to modify, delete, move, or  
rename an image, do so only on images that are stored on your computer.  
IMPORTANT!  
• Never unplug the USB cable, or operate the camera while viewing or storing  
images. Doing so can cause data to become corrupted.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
137  
Playing Movies  
To play back a movie, first copy it to your computer and then double-click the movie  
file. Some operating systems may not be able to play back movies. If this happens,  
you need to install separately available software.  
• With Windows 7, playback is supported by Windows Media Player 12.  
• If you are unable to play back movies, go to the URL below to download  
QuickTime 7 and install it on your computer.  
http://www.apple.com/quicktime/  
. Minimum Computer System Requirements for Movie Playback  
The minimum system requirements described below are necessary to play back  
movies recorded with this camera on a computer.  
Operating System : Windows 7, Windows Vista, Windows XP (SP2/SP3)  
CPU  
: Image Quality “FHD”:  
Core 2 Duo 3.0GHz or higher  
Image Quality “STD” or “HS”:  
Pentium 4 3.2GHz or higher  
Required Software: QuickTime 7 (Not required with Windows 7.)  
• The above are recommended system environments. Configuring one of these  
environments does not guarantee proper operation.  
• Certain settings and other installed software may interfere with proper playback of  
movies.  
. Movie Playback Precautions  
• Be sure to move the movie data to the hard disk of your computer before trying to  
play it. Proper movie playback may not be possible for data accessed over a  
network, from a memory card, etc.  
• Proper movie playback may not be possible on some computers. If you experience  
problems, try the following.  
– Try recording movies with a quality setting of “STD”.  
– Quit any other applications you have running, and stop resident applications.  
Even if proper playback is not possible on the computer, you can use the AV cable  
that comes bundled with the camera to connect to the video input terminal of a TV or  
computer and play back movies that way.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
138  
 
Uploading Movie Files to YouTube  
Installing YouTube Uploader for CASIO from the CD-ROM that comes with your  
camera simplifies uploading of movie files you recorded with the “For YouTube”  
scene to YouTube.  
. What is YouTube?  
YouTube is a movie sharing site managed by YouTube, LLC where you can upload  
movies and view movies uploaded by others.  
. To install YouTube Uploader for CASIO  
1. On the CD-ROM menu screen, select “YouTube Uploader for CASIO”.  
2. After reading the information about installation conditions and system  
requirements for installation in the “Read me” file, install YouTube  
Uploader for CASIO.  
. To upload a movie file to YouTube  
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube  
website (http://www.youtube.com/) and register as a user there.  
• Do not upload any video that is copyrighted (including neighboring copyrights)  
unless you yourself own the copyright or you have obtained the permission of the  
applicable copyright holder(s).  
• The maximum file size for each upload is 2048MB or 15 minutes of playing time.  
1. Record the movie you want to upload using the “For YouTube” scene  
(page 61).  
2. If it isn’t already, connect your computer to the Internet.  
3. Connect the camera to your computer (page 134).  
4. Turn on the camera.  
YouTube Uploader for CASIO will start up automatically.  
• If this is the first time you are using the application, configure the YouTube user  
ID and network environment settings, and then click the [OK] button.  
5. The left side of the display will have an area for inputting a title,  
category, and other information required for uploading to YouTube.  
Enter the required information.  
6. The right side of the display shows a list of movie files in camera  
memory. Select the check box next to the movie file you want to  
upload.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
139  
   
7. When everything is ready, click the [Upload] button.  
This will upload the movie file(s) to YouTube.  
• After uploading is complete, click the [Exit] button to exit the application.  
Transferring Images from Your Computer to Camera Memory  
If you want to transfer images from your computer to the camera, install Photo  
Transport on your computer from the CD-ROM that comes with the camera.  
. To install Photo Transport  
1. On the CD-ROM menu screen, select “Photo Transport”.  
2. After reading the information about installation conditions and system  
requirements for installation in the “Read me” file, install Photo  
Transport.  
. To transfer images to the camera  
1. Connect the camera to your computer (page 134).  
2. On your computer, click the following: Start *All Programs *  
CASIO *Photo Transport.  
This starts up Photo Transport.  
3. Drag the file(s) you want to transfer to the [Transfer] button.  
4. Follow the instructions that appear on the display to complete the  
transfer.  
• The details of the instructions that appear on the display and the transferred  
images will depend on your Photo Transport setup. For details, click the  
[Settings] button or [Help] button and check the setup.  
Transfer Data  
• Only image files with the following extensions can be transferred to the camera:  
jpg, jpeg, jpe, bmp (bmp images are converted to jpeg images automatically when  
transferred.)  
• Certain types of images may not be able to be transferred.  
• You cannot transfer movies to the camera.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
140  
     
. To transfer computer screen captures to the camera  
1. Connect the camera to your computer (page 134).  
2. On your computer, click the following: Start *All Programs *  
CASIO *Photo Transport.  
This starts up Photo Transport.  
3. Display the screen whose screen capture you want to transfer.  
4. Click the [Capture] button.  
5. Draw a boundary around the area you want to capture.  
Move your mouse pointer to the upper left corner of the area you want to capture  
and then hold down the mouse button. Keeping the mouse button depressed,  
drag the pointer down to the lower right corner of the area and then release the  
mouse button.  
6. Follow the instructions that appear on the display.  
This will send an image of the area you selected to the camera.  
• The transfer operation converts screen captures to JPEG format.  
• The instructions that appear on the display and details about the transferred  
images will depend on your Photo Transport setup. For details, click the  
[Settings] button or [Help] button and check the setup.  
. About settings and help  
Click the [Settings] button when you want to change the Photo Transport setup. For  
help about operation procedures and troubleshooting, click the Photo Transport  
[Help] button.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
141  
Viewing User Documentation (PDF Files)  
1. Start up your computer, and place the bundled CD-ROM into its CD-  
ROM drive.  
Normally, this should cause the menu screen to appear automatically. If your  
computer does not display the menu screen automatically, navigate to the CD-  
ROM on your computer and then double-click the “AutoMenu.exe” file.  
2. On the menu screen, click the “Language” down arrow button and then  
select the language you want.  
3. Click “Manual” to select it and then click “Digital Camera”.  
IMPORTANT!  
• You must have Adobe Reader or Adobe Acrobat Reader installed on your  
computer in order to view the contents of a PDF file. If you do not already have  
Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the  
bundled CD-ROM.  
User Registration  
You can perform user registration over the Internet. To do so, of course, you need to  
be able to connect to the Internet with your computer.  
1. On the CD-ROM menu screen, click the “Register” button.  
• This starts up your Web browser and accesses the user registration website.  
Follow the instructions that appear on your computer screen to register.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
142  
   
Using the Camera with a Macintosh  
Install the required software in accordance with what version of the Macintosh OS  
you are running and what you want to do.  
When you want to  
do this:  
Operating  
System Version  
See  
page:  
Install this software:  
Save images to your  
Macintosh and view  
them there manually  
OS 9  
OS X  
Installation not required.  
Use commercially available  
software.  
Save images to your  
Macintosh  
automatically/  
Manage images  
OS 9  
Use iPhoto, which comes bundled  
with some Macintosh products.  
OS X  
OS 9  
Playback not supported.  
Movie file playback is supported  
under OS X 10.4.11 or higher  
when QuickTime 7 or higher is  
installed.  
Play movies  
OS X  
Connecting the Camera to Your Computer and Saving Files  
IMPORTANT!  
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X  
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5, 10.6)  
only. Use the standard USB driver that comes with your supported operating  
system.  
. To connect the camera to your computer and save files  
1. Turn on the camera and press [MENU].  
2. On the “Set Up” tab, select “USB” and then press [6].  
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
143  
       
4. Turn off the camera and then use the USB cable that comes with the  
camera to connect it to your Macintosh.  
USB port  
USB cable  
Large connector  
[USB/AV] port  
Small connector  
Terminal  
cover  
Making sure that the 6mark on the camera is aligned  
with the 4mark of the USB cable connector, connect  
the cable to the camera.  
• The camera does not draw power over the USB cable. Check the battery level  
before connecting and make sure it is not too low.  
• Make sure that you insert the cable connector into the USB/AV port until you  
feel it click securely into place. Failure to insert the connector fully can result in  
poor communication or malfunction.  
• Note that even while the connector is fully inserted, you  
still will be able to see the metal part of the connector as  
shown in the illustration.  
• When connecting the USB cable to a USB port, make  
sure you align the connector correctly with the port.  
• Your computer may not be able to recognize the camera  
if you connect via a USB hub. Always connect directly to  
the computer’s USB port.  
5. Turn on the camera.  
The camera’s back lamp will light green at this time. In this mode, your Macintosh  
recognizes the memory card loaded in the camera (or the camera’s built-in  
memory if it does not have a memory card loaded) as a drive. The appearance of  
the drive icon depends on the Mac OS version you are using.  
6. Double-click the camera’s drive icon.  
7. Drag the “DCIM” folder to the folder to which you want to copy it.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
144  
   
8. After the copy operation is complete, drag the drive icon to Trash.  
9. On the camera, press [ON/OFF] (Power) to turn off the camera. After  
making sure that the green back lamp is unlit, disconnect the camera  
from the computer.  
. To view copied images  
1. Double-click the camera’s drive icon.  
2. Double-click the “DCIM” folder to open it.  
3. Double-click the folder that contains the images you want to view.  
4. Double-click the image file you want to view.  
• For information about file names, see “Memory Folder Structure” on page 149.  
• An image that was rotated on the camera will be displayed on your Macintosh  
screen in its original (unrotated) orientation.  
• Viewing a CS image on a computer will individually display the component  
images in the CS group. A CS group cannot be viewed as a CS image on a  
computer.  
Never use your computer to modify, delete, move, or rename any image files  
that are in the camera’s built-in memory or on its memory card.  
Doing so can cause problems with the camera’s image management data, which  
will make it impossible to play back images on the camera and can drastically alter  
remaining memory capacity. Whenever you want to modify, delete, move, or  
rename an image, do so only on images that are stored on your computer.  
IMPORTANT!  
• Never unplug the USB cable, or operate the camera while viewing or storing  
images. Doing so can cause data to become corrupted.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
145  
 
Transferring Images Automatically and Managing Them on  
Your Macintosh  
If you are running Mac OS X, you can manage snapshots using iPhoto, which comes  
bundled with some Macintosh products. If you are running Mac OS 9, you will need to  
use commercially available software.  
Playing a Movie  
You can use QuickTime, which comes bundled with your operating system, to play  
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh  
and then double-click the movie file.  
. Minimum Computer System Requirements for Movie Playback  
The minimum system requirements described below are necessary to play back  
movies recorded with this camera on a computer.  
Operating System : Image Quality “FHD”:  
Mac OS X 10.4.11 or higher  
Image Quality “STD” or “HS”:  
Mac OS X 10.3.9 or higher  
Required Software: QuickTime 7 or higher  
• The above are recommended system environments. Configuring one of these  
environments does not guarantee proper operation.  
• Certain settings and other installed software may interfere with proper playback of  
movies.  
• Movie file playback is not supported under OS 9.  
. Movie Playback Precautions  
Proper movie playback may not be possible on some Macintosh models. If you  
experience problems, try the following.  
– Upgrade to the latest version of QuickTime.  
– Shut down other applications that are running.  
Even if proper playback is not possible on your Macintosh, you can use the AV cable  
that comes bundled with the camera to connect to the video input terminal of a TV or  
Macintosh and play back movies that way.  
IMPORTANT!  
• Be sure to move the movie data to the hard disk of your Macintosh before trying to  
play it. Proper movie playback may not be possible for data accessed over a  
network, from a memory card, etc.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
146  
   
Viewing User Documentation (PDF Files)  
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer  
in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems  
Incorporated website and install Acrobat Reader.  
1. On the CD-ROM, open the “Manual” folder.  
2. Open the “Digital Camera” folder and then open the folder for the  
language whose user’s guide you want to view.  
3. Open the file named “camera_xx.pdf”.  
• “xx” is the language code (Example: camera_e.pdf is for English.)  
User Registration  
Internet registration only is supported. Visit the following CASIO website to register:  
http://world.casio.com/qv/register/  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
147  
   
Files and Folders  
The camera creates a file each time you shoot a snapshot, record a movie, or  
perform any other operation that stores data. Files are grouped by storing them in  
folders. Each file and folder has its own unique name.  
• For details about how folders are organized in memory, see “Memory Folder  
Name and Maximum Number Allowed  
Example  
File  
Each folder can contain up to 9999 files named 26th file name:  
CIMG0001 through CIMG9999. The extension  
CIMG0026.JPG  
on the file name depends on the file type.  
Serial number Extension  
(4 digits)  
Folders  
Folders are named from 100CASIO to  
100th folder name:  
999CASIO.  
100CASIO  
There can be up to 900 folders in memory.  
• BEST SHOT has a scene named “For  
YouTube” that optimizes movie settings for  
recording movies for upload to YouTube.  
Images recorded with the YouTube scene are  
stored in a folder named “100YOUTB”.  
Serial number (3 digits)  
• You can view folder and file names on your computer. For details about how file  
names are displayed on the camera’s monitor screen, see pages 12 and 13.  
• The total number of folders and files allowed depends on the image size and  
quality, and capacity of the memory card being used for storage.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
148  
   
                           
*
Memory Card Data  
The camera stores images you shoot in accordance with the Design Rule for Camera  
File System (DCF).  
. About DCF  
The following operations are supported for DCF-compliant images. Note, however,  
that CASIO makes no performance guarantees concerning these operations.  
• Transferring this camera’s DCF-compliant images to another manufacturer’s  
camera and view them.  
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.  
• Transferring another camera’s DCF-compliant images to this camera and view  
them.  
. Memory Folder Structure  
DCIM Folder  
Recording Folder  
Image File  
DCIM  
1
100CASIO  
CIMG0001.JPG  
CIMG0002.MOV  
Movie File  
1
*
101CASIO  
102CASIO  
Recording Folder  
Recording Folder  
1
*
MISC  
AUTPRINT.MRK  
DPOF File Folder  
DPOF File  
2
*
SCENE  
Snapshot BEST SHOT User Setup Folder  
SSBGM  
SSBGM001.WAV  
SSBGM002.WAV  
Background Music Folder  
Background Music File  
Background Music File  
2
*
STARTING.JPG  
Startup Image File  
*1 The BEST SHOT “For YouTube” scene sets up the camera for recording movies that  
are optimized for uploading to YouTube. Images recorded with the “For YouTube”  
scene are stored in a folder named “100YOUTB”.  
*2 This folder or file can be created in built-in memory only.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
149  
       
. Supported Image Files  
• Image files shot with this camera  
• DCF-compliant image files  
This camera may not be able to display an image, even if it is DCF-compliant. When  
displaying an image recorded on another camera, it may take a long time for the  
image to appear on this camera’s monitor screen.  
. Built-in Memory and Memory Card Data Handling Precautions  
• Whenever copying memory contents to your computer, you should copy the DCIM  
folder and all of its contents. A good way to keep track of multiple DCIM folders it to  
change their names to dates or something similar after you copy them to your  
computer. If you later decided to return a DCIM folder to the camera, however, be  
sure to change its name back to DCIM. The camera is designed to recognize only a  
root file with the name DCIM. Note the camera also will not be able to recognize the  
folders inside the DCIM folder unless they have the names they originally had  
when you copied them from the camera to your computer.  
• Folders and files must be stored in accordance with the “Memory Folder Structure”  
shown on page 149 in order for the camera to be able to recognize them correctly.  
• You also can use a PC card adapter or a memory card reader/writer to access  
camera files directly from the camera’s memory card.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
150  
Other Settings (Set Up)  
This section explains menu items that you can use to configure settings and perform  
other operations in both the REC mode and PLAY mode.  
For information about menu operations, see page 81.  
Adjusting Monitor Screen Brightness (Screen)  
Procedure  
[MENU] *Set Up Tab *Screen  
With this setting, the camera detects available light levels and  
Auto  
automatically adjusts the brightness of the monitor screen accordingly.  
Brightness that is greater than +1, which makes the screen easier to view.  
This setting consumes more power.  
+2  
+1  
0
Bright setting for outdoor use, etc. Brightness that is greater than 0.  
Normal monitor screen brightness for indoor use, etc.  
Auto Image Orientation Detection and Rotation (Auto Rotate)  
Procedure  
[MENU] *Set Up Tab *Auto Rotate  
Automatically rotates snapshots shot with the camera held vertically 90  
degrees.  
On  
Off  
Images not rotated automatically.  
The camera automatically detects whether a snapshot image was shot in portrait or  
landscape orientation and displays it accordingly. Auto rotation is not performed for  
movies.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
151  
       
Configuring Camera Sound Settings (Sounds)  
Procedure  
[MENU] *Set Up Tab *Sounds  
Startup  
Specifies the startup sound  
Sound 1 - 5: Built-in sounds (1 through 5)  
Off: Sound off  
Half Shutter  
Shutter  
Operation  
Specifies the sound volume. This setting is also used as the  
audio level during video output (page 105).  
Operation  
Play  
=
=
Specifies the volume of movie audio output. This volume  
setting is not used during video output (from the USB/AV port)  
• Setting a volume level of 0 mutes output.  
Specifying the File Name Serial Number Generation Rule  
(File No.)  
Procedure  
[MENU] *Set Up Tab *File No.  
Use the following procedure to specify the rule that governs generation of the serial  
number used in file names (page 148).  
Tells the camera to remember the last used file number. A new file will  
be named using the next sequential number, even if files are deleted or  
if a blank memory card is loaded. If a memory card is loaded and that  
Continue card already has files stored on it and the largest sequential number in  
the existing file names is greater than the largest sequential number  
remembered by the camera, numbering of new files will start from the  
largest sequential number in the memory card file names plus 1.  
Restarts the serial number from 0001 whenever all files are deleted or  
when the memory card is replaced with a blank one. If a memory card  
Reset  
is loaded and that card already has files stored on it, numbering of new  
files will start from the largest sequential number in the memory card  
file names plus 1.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
152  
   
Creating an Image Storage Folder (Create Folder)  
Procedure  
[MENU] *Set Up Tab *Create Folder  
Creates a folder with a unique number (page 148). Files will be  
stored in the new folder starting from when you record your  
next image.  
Create Folder  
Cancel  
Cancels folder creation.  
• Images recorded with the BEST SHOT “For eBay” or “Auction” scene, and the “For  
YouTube” scene are stored in special folders. They are not stored in the folder you  
create here.  
• Deleting all of the files in a folder cause the folder to be deleted as well.  
Configuring World Time Settings (World Time)  
Procedure  
[MENU] *Set Up Tab *World Time  
You can use the World Time screen to view the current time in a zone that is different  
from your Home City when you go on a trip, etc. World Time displays the current time  
in 162 cities in 32 time zones around the globe.  
1. Use [8] and [2] to select “World” and then press [6].  
• To change the geographic area and city for the time where you normally use  
the camera, select “Home”.  
2. Use [8] and [2] to select “City” and then press [6].  
• To change the “World” setting to summer time, use [8] and [2] to select  
“DST” and then select “On”. Summer time is used in some geographical areas  
to advance the current time setting by one hour during the summer months.  
3. Use [8], [2], [4], and [6] to select the geographic area you want and  
then press [SET].  
4. Use [8] and [2] to select the city you want and then press [SET].  
5. Press [SET].  
IMPORTANT!  
• Before configuring World Time settings, make sure that the Home City setting is  
the place where you live or normally use the camera. If it isn’t, select “Home” on the  
screen in step 1 and configure the Home City, date, and time settings as required  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
153  
   
Time Stamping Snapshots (Timestamp)  
Procedure  
[MENU] *Set Up Tab *Timestamp  
You can configure the camera to stamp the recording date only, or date and time in  
the lower right corner of each snapshot.  
• Once date and time information is stamped into a snapshot, it cannot be edited or  
deleted.  
Example: July 10, 2012, 1:25 p.m.  
Date  
2012/7/10  
Date&Time  
Off  
2012/7/10 1:25pm  
No stamping of date and/or time  
• Even if you do not stamp the date and/or time with Timestamp, you can do so later  
using the DPOF function or some printing application (page 130).  
• Stamping is performed in accordance with the date and time settings (page 155)  
and the display style settings (page 155).  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
154  
   
Setting the Camera’s Clock (Adjust)  
Procedure  
[MENU] *Set Up Tab *Adjust  
[8] [2]  
[4] [6]  
Change the setting at the cursor location  
Move the cursor between settings  
[0] (Movie) Toggles between 12-hour and 24-hour format  
When the date and time settings are what you want, select “Apply” and then press  
[SET] to apply them.  
• You can specify a date from 2001 to 2049.  
• Be sure to select your Home City (page 153) before setting the time and date. If  
you set the time and date while the wrong city is selected for your Home City, the  
times and dates of all of the World Time cities (page 153) will be wrong.  
Specifying the Date Style (Date Style)  
Procedure  
[MENU] *Set Up Tab *Date Style  
You can select from among three different styles for the date.  
Example: July 10, 2012  
YY/MM/DD  
DD/MM/YY  
MM/DD/YY  
12/7/10  
10/7/12  
7/10/12  
• This setting also affects the control panel date format as shown below (page 33).  
YY/MM/DD or MM/DD/YY: MM/DD  
DD/MM/YY: DD/MM  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
155  
       
Specifying the Display Language (Language)  
Procedure  
[MENU] *Set Up Tab *Language  
. Specify the display language you want.  
Select the tab on the right.  
Select “Language”.  
Select the language you want.  
• Camera models sold in certain geographic areas  
may not support display language selection.  
1
1
2
3
23  
Configuring Sleep State Settings (Sleep)  
Procedure  
[MENU] *Set Up Tab *Sleep  
This feature turns off the monitor screen whenever no camera operation is performed  
for a preset amount of time. Press any button to turn the monitor screen back on.  
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is  
selected.)  
• Sleep is disabled under any of the following conditions.  
– In the PLAY mode  
– While the camera is connected to a computer or other device  
– During a slideshow  
– During movie recording and playback  
– When both sleep and Auto Power Off are turned on, Auto Power Off takes  
priority.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
B
156  
       
Configuring Auto Power Off Settings (Auto Power Off)  
Procedure  
[MENU] *Set Up Tab *Auto Power Off  
Auto Power Off turns off the camera whenever no camera operation is performed for  
a preset amount of time.  
Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in  
the PLAY mode.)  
• Auto Power Off is disabled under any of the following conditions.  
– While the camera is connected to a computer or other device  
– During a slideshow  
– During CS group playback  
– During movie recording and playback  
Configuring [r] and [p] Settings (REC/PLAY)  
Procedure  
[MENU] *Set Up Tab *REC/PLAY  
Camera turns on whenever [r] (REC) or [p] (PLAY) is  
pressed.  
Power On  
Camera turns on or off whenever [r] (REC) or [p] (PLAY) is  
pressed.  
Power On/Off  
Camera does not turn on or off when [r] (REC) or [p] (PLAY)  
is pressed.  
Disable  
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC  
mode or [p] (PLAY) in the PLAY mode.  
• Change this setting to “Power On” or “Power On/Off” before connecting to a TV for  
image viewing.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
157  
       
Configuring USB Protocol Settings (USB)  
Procedure  
[MENU] *Set Up Tab *USB  
You can use the procedure below to select the USB communication protocol, which is  
used when exchanging data with a computer, printer, or other external device.  
Select this setting when connecting to a computer (pages 134,  
143). With this setting, the computer sees the camera as an  
external storage device. Use this setting for normal transfer of  
Mass Storage  
images from the camera to a computer.  
PTP  
(PictBridge)  
Select this setting when connecting to a printer that supports  
PictBridge (page 124).  
Selecting the Screen Aspect Ratio and Video Output System  
(Video Out)  
Procedure  
[MENU] *Set Up Tab *Video Out  
You can use the procedure in this section to select either NTSC or PAL as the video  
output system. You can also specify an aspect ratio of 4:3 or 16:9.  
NTSC Video system used in Japan, the U.S., and other countries  
PAL  
Video system used in Europe and other areas  
4:3  
Normal TV screen aspect ratio  
Wide screen aspect ratio  
16:9  
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.  
Images will not display correctly if you select the wrong aspect ratio.  
• Images will not display correctly unless the camera’s video signal output setting  
matches the video signal system of the TV or other video equipment.  
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC  
or PAL.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
158  
   
Selecting the HDMI Terminal Output Method (HDMI Output)  
Procedure  
[MENU] *Set Up Tab *HDMI Output  
• See page 108 for details.  
Configuring a Startup Image (Startup)  
Procedure  
[MENU] *Set Up Tab *Startup  
Display the image you want to use as your startup image and then select “On”.  
• The startup image does not appear when you turn on the camera by pressing [p]  
(PLAY).  
• You can specify a snapshot you recorded as the startup image, or you can use the  
special startup image provided in the camera’s built-in memory.  
• Formatting built-in memory (page 160) will delete the current startup image setting.  
• You can select the first snapshot of a CS group as the startup image. If you want to  
select another image within a CS group, you need to first divide up the CS group or  
use the CS Frame Edit feature to make a copy of the image outside of the CS  
group.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
159  
   
Formatting Built-in Memory or a Memory Card (Format)  
Procedure  
[MENU] *Set Up Tab *Format  
If a memory card is loaded in the camera, this operation will format the memory card.  
It will format built-in memory if no memory card is loaded.  
• The format operation will delete all contents on the memory card or in built-in  
memory. It cannot be undone. Make sure you do not need any data currently on  
the card or in built-in memory before you format it.  
• Formatting built-in memory will delete the following data.  
– Protected images  
– BEST SHOT user setups  
– Startup screen  
• Formatting a memory card will delete the following data.  
– Protected images  
• Check the battery level before starting a format operation and make sure it is not  
too low. Formatting may not be performed correctly and the camera may stop  
operating normally if the camera powers down while formatting is in progress.  
• Never open the battery cover while formatting is in progress. Doing so can cause  
the camera to stop operating normally.  
Resetting the Camera to Factory Defaults (Reset)  
Procedure  
[MENU] *Set Up Tab *Reset  
See page 175 for details about the camera’s factory default settings.  
The settings below are not reset.  
World Time settings, clock settings, date style, screen language, video output  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
160  
       
Configuring Monitor Screen Settings  
Turning Display Information On and Off (Info)  
Each press of [8] (DISP) will cycle through display settings that display or hide on-  
screen information and the control panel. You can configure separate settings for the  
REC mode and PLAY mode.  
Information on,  
Displays setting information and the control panel.  
control panel on  
Displays setting information and the  
control panel, and a histogram (page 161)  
on the left side of the display. Also  
displays the remaining movie recording  
time in place of the remaining snapshot  
capacity, as well as a movie image quality icon.  
Information on,  
control panel on,  
histogram on  
Histogram  
Information off,  
control panel off  
Hides setting information and the control panel.  
• The control panel is not displayed and display information settings cannot be  
changed during movie recording.  
Using the On-screen Histogram to Check Exposure  
(+Histogram)  
Displays a histogram on the monitor screen which you can use to  
check the exposure of an image before you shoot it. You also can  
display the histogram in the PLAY mode for information about the  
exposure levels of images.  
Histogram  
NOTE  
• A centered histogram does not necessarily guarantee optimum exposure. The  
recorded image may be over-exposed or under-exposed, even though its  
histogram is centered.  
• Due to the limitations of exposure compensation, you may not be able to achieve  
an optimum histogram configuration.  
• Use of the flash and certain shooting conditions can cause the histogram to  
indicate exposure that is different from the actual exposure of the image when it is  
shot.  
• The histogram cannot be displayed during high speed movie recording.  
Configuring Monitor Screen Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
161  
           
How to Use the Histogram  
A histogram is a graph that represents the lightness of an image in terms of the  
number of pixels. The vertical axis indicates the number of pixels, while the horizontal  
axis indicates lightness. If the histogram appears too lopsided for some reason, you  
can use EV shift to move it left or right in order to achieve better balance. Optimum  
exposure can be achieved by EV shifting so the graph is as close to the center as  
possible. For snapshots, you can even display individual histograms for R (red), G  
(green), and B (blue).  
Example Histograms  
A histogram towards the left side results when the  
overall image is dark. A histogram that is too far to  
the left may result in “black out” of the dark areas  
of an image.  
A histogram towards the right side results when  
the overall image is light. A histogram that is too  
far to the right may result in “white out” of the light  
areas of an image.  
An overall well-balanced histogram results when  
the overall image is at optimal lightness.  
Configuring Monitor Screen Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
162  
 
Appendix  
Precautions during Use  
. Avoid Use While In Motion  
• Never use the camera to record or play back images while operating an automobile  
or other vehicle, or while walking. Looking at the monitor while in motion creates  
the risk of serious accident.  
. Flash  
• Never use the flash unit in areas where flammable or explosive gas may be  
present. Such conditions create the risk of fire and explosion.  
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so  
can interfere with the driver’s vision and creates the risk of accident.  
• Never fire the flash too close to the eyes of the subject. Doing so creates the risk of  
loss of eyesight.  
. Monitor Screen  
• Should the monitor screen ever become cracked, never touch any of the liquid  
inside the monitor screen. Doing so creates the risk of skin inflammation.  
• Should monitor screen liquid ever get into your mouth, immediately rinse your  
mouth out and contact your physician.  
• Should monitor screen liquid ever get into your eyes or onto your skin, immediately  
rinse with clean water for at least 15 minutes and contact your physician.  
. Connections  
• Never plug any devices that are not specified for use with this camera into  
connectors. Connecting a non-specified device creates the risk of fire and electric  
shock.  
. Transport  
• Never operate the camera inside of an aircraft or anywhere else where operation of  
such devices is restricted. Improper use creates the risk of serious accident.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
163  
   
. Smoke, abnormal odor, overheating, and other abnormalities  
• Continued use of the camera while it is emitting smoke or strange odor, or while it  
is overheating creates the risk of fire and electric shock. Immediately perform the  
following steps whenever any of the above symptoms are present.  
1. Turn off the camera.  
2. Remove the battery from the camera, taking care to protect yourself against burn  
injury.  
3. Contact your dealer or nearest CASIO authorized service center.  
. Water and Foreign Matter  
• Water, other liquids, or foreign matter (especially metal) getting inside the camera  
creates the risk of fire and electric shock. Immediately perform the following steps  
whenever any of the above symptoms are present. Particular care is required when  
using the camera where it is raining or snowing, near the ocean or other body of  
water, or in a bathroom.  
1. Turn off the camera.  
2. Remove the battery from the camera.  
3. Contact your dealer or nearest CASIO authorized service center.  
. Dropping and Rough Treatment  
• Continued use of the camera after it is damaged by dropping or other rough  
treatment creates the risk of fire and electric shock. Immediately perform the  
following steps whenever any of the above symptoms are present.  
1. Turn off the camera.  
2. Remove the battery from the camera.  
3. Contact your dealer or nearest CASIO authorized service center.  
. Keep Away From Fire  
• Never expose the camera to fire, which can cause it to explode and creates the risk  
of fire and electric shock.  
. Disassembly and Modification  
• Never try to take the camera apart or modify it in any way. Doing so creates the risk  
of electric shock, burn injury, and other personal injury. Be sure to leave all internal  
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized  
service center.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
164  
. Locations To Be Avoided  
• Never leave the camera in any of the following types of locations. Doing so creates  
the risk of fire and electric shock.  
– Areas subject to large amounts of humidity or dust  
– Food preparation areas or other locations where oil smoke is present  
– Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed  
vehicle parked in the sun, or other areas subject to very high temperatures  
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can  
cause the camera to fall, creating the risk of personal injury.  
. Backing Up Important Data  
• Always keep backup copies of important data in camera memory by transferring it  
to a computer or other storage device. Note that data can be deleted in the case of  
camera malfunction, repair, etc.  
. Memory Protection  
• Whenever replacing the battery, be sure to follow the correct procedure as  
described in the documentation that comes with the camera. Incorrectly replacing  
the battery can result in corruption or loss of data in camera memory.  
. Rechargeable Battery  
• Use only the specified charger unit or the specified device to charge the battery.  
Attempting to charge the battery by an unauthorized means creates the risk of  
battery overheating, fire, and explosion.  
• Do not expose or immerse the battery in fresh water or salt water. Doing so can  
damage the battery, and cause deterioration of its performance and loss of service  
life.  
• The battery is intended for use with a CASIO Digital Camera only. Use with any  
other device creates the risk of the battery damage, or deterioration of battery  
performance and service life.  
• Failure to observe any of the following precautions creates the risk of battery  
overheating, fire, and explosion.  
– Never use or leave the battery near open flame.  
– Do not expose the battery to heat or fire.  
– Make sure the battery is oriented correctly when it is connected to the charger  
unit.  
– Never carry or store the battery together with items that can conduct electricity  
(necklaces, pencil lead, etc.)  
– Never disassemble the battery, pierce it with a needle, or expose it to strong  
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never  
place the battery into a microwave oven, heater, high-pressure generating  
device, etc.  
• Should you ever notice leakage, strange odor, heat generation, discoloration,  
deformation, or any other abnormal condition while using, charging, or storing a  
battery, immediately remove it from the camera or charger unit and keep it away  
from open flame.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
165  
• Do not use or leave the battery under direct sunlight, in an automobile parked in the  
sun, or in any other area subject to high temperatures. Doing so can damage the  
battery, and cause deterioration of its performance and loss of service life.  
• If battery charging does not end normally within the specified charging time, stop  
charging anyway and contact your local CASIO authorized service center.  
Continued charging creates the risk of battery overheating, fire, and explosion.  
• Battery fluid can damage your eyes. Should battery fluid get into your eyes  
accidentally, immediately rinse them with clean tap water and then consult a  
physician.  
• Be sure to read the user documentation that comes with the camera and special  
charger unit before using or charging the battery.  
• If a battery is to be used by young children, make sure that a responsible adult  
makes them aware of the precautions and proper handling instructions, and make  
sure that they handle the battery correctly.  
• Should fluid from a battery accidentally get onto clothing or your skin, immediately  
rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin  
irritation.  
. Battery Life  
• Battery continuous operation times provided in this manual represent the  
approximate amount of time before the camera turns off due to low battery power  
when being powered by the special battery under normal temperature (23°C  
(73°F)). They do not guarantee that you will be able to achieve the indicated level  
of operation. Actual battery life is greatly affected by ambient temperature, battery  
storage conditions, the amount of time spent in storage, etc.  
• Leaving the camera on can run down the battery and cause the low battery  
warning to appear. Turn off the camera whenever you are not using it.  
• The low battery warning indicates that the camera is about to turn off due to low  
battery power. Charge the battery as soon as possible. Leaving a low or dead  
battery in the camera can lead to battery leakage and data corruption.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
166  
. Data Error Precautions  
Your digital camera is manufactured using precision digital components. Any of the  
following creates the risk of corruption of data in camera memory.  
– Removing the battery or memory card while the camera is performing some  
operation  
– Removing the battery or memory card while the back lamp is flashing green after  
turning off the camera  
– Disconnecting the USB cable while communication is in progress  
– Using a battery that is low  
– Other abnormal operations  
Any of the above conditions can cause an error message to appear on the monitor  
screen (page 183). Perform the action indicated by the message that appears.  
. Operating Environment  
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)  
• Operating Humidity: 10 to 85% (non condensation)  
• Do not place the camera in any of the following locations.  
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand  
– Near an air conditioner or in other areas subjected to extreme temperature or  
humidity  
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration  
. Condensation  
Sudden and extreme temperature changes, such as when the camera is moved from  
the outdoors on a cold winter day into a warm room, can cause water droplets called  
“condensation” to form on the interior and the exterior of the camera, which creates  
the risk of malfunction. To prevent condensation from forming seal the camera in a  
plastic bag before changing locations. Then leave the bag sealed to allow the air  
inside to naturally change to the same temperature as the air in the new location.  
After that, remove the camera from the bag and open the battery cover for a few  
hours.  
. Lens  
• Never apply too much force when cleaning the surface of the lens. Doing so can  
scratch the lens surface and cause malfunction.  
• You may sometimes notice some distortion in certain types of images, such as a  
slight bend in lines that should be straight. This is due to the characteristics of  
lenses, and does not indicate malfunction of the camera.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
167  
 
. Caring for your camera  
• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and  
other foreign matter on the lens or flash window can interfere with proper operation  
of the camera. Use a blower or other means to keep the lens and flash window free  
of dirt and dust, and wipe gently with a soft, dry cloth.  
• To clean the camera, wipe it with a soft, dry cloth.  
. Old Rechargeable Battery Handling Precautions  
• Insulate the positive and negative terminals with tape, etc.  
• Do not peel the covering off of the battery.  
• Do not try to take the battery apart.  
. Charger Unit Handling Precautions  
-
0Never plug the power cord into an outlet whose voltage rating is different from  
that marked on the power cord. Doing so creates the risk of fire, malfunction,  
and electric shock.  
0Take care to protect the power cord against damage and breaking. Never place  
heavy objects onto the power cord, or expose it to intense heat. Doing so can  
damage the power cord, creating the risk of fire and electric shock.  
0Never try to modify the power cord, or subject it to severe bending, twisting, or  
pulling. Doing so creates the risk of fire, malfunction, and electric shock.  
0Never plug in or unplug the power cord while your hands are wet. Doing so  
creates the risk of electric shock.  
0Do not plug the power cord into an outlet or extension cord that is shared by  
other devices. Doing so creates the risk of fire, malfunction, and electric shock.  
0Should the power cord ever become damaged (to the point that internal wires  
are exposed or cut), immediately contact your original retailer or a CASIO  
authorized service center to request repair. Continued use of a damaged power  
cord creates the risk of fire, malfunction, and electric shock.  
• The charger unit becomes slightly warm during charging. This is normal and does  
not indicate malfunction.  
• Unplug the power cord from the power outlet when you are not using the charger  
unit.  
• Never use detergent to clean the power cord (especially the plug).  
• Never cover the charger unit with a blanket, etc. Doing so creates the risk of fire.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
168  
. Other Precautions  
The camera becomes slightly warm during use. This is normal and does not indicate  
malfunction.  
. Copyrights  
Except for your own personal enjoyment, unauthorized use of use of snapshots or  
movies of images whose rights belong to others, without the permission of the right  
holder, is forbidden by copyright laws. In some cases, shooting of public  
performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your  
own personal enjoyment. Regardless of whether such files are purchased by you or  
obtained for free, posting them on a website, a file sharing site, or any other Internet  
site, or otherwise distributing them to third parties without the permission of the  
copyright holder is strictly prohibited by copyright laws and international treaties. For  
example, uploading or distributing on the Internet images of TV programs, live  
concerts, music videos, etc. that were photographed or recorded by you may infringe  
upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held  
liable for use of this product in any way that infringes on the copyrights of others or  
that violates copyright laws.  
The following terms, which are used in this manual, are registered trademarks or  
trademarks of their respective owners.  
Note that trademark and registered trademark ® are not used within the text of this  
manual.  
• SDXC Logo is a trademark of SD-3C, LLC.  
• Microsoft, Windows, Internet Explorer, Windows Media, Windows Vista,  
Windows 7, and DirectX are registered trademarks or trademarks of Microsoft  
Corporation in the United States and other countries.  
• Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc.  
• Adobe and Reader are trademarks or registered trademarks in the United States  
and other countries of Adobe Systems Incorporated.  
• YouTube, the YouTube logo, and “Broadcast Yourself” are trademarks or  
registered trademarks of YouTube, LLC.  
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing, LLC.  
• EXILIM, Photo Transport, Dynamic Photo, and YouTube Uploader for CASIO are  
registered trademarks or trademarks of CASIO COMPUTER CO., LTD.  
• All other company or product names mentioned herein may be registered  
trademarks or trademarks of their respective companies.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
169  
Any and all unauthorized commercial copying, distribution, and copying of the  
bundled software over a network are prohibited.  
This product’s YouTube upload functionality is included under license from YouTube,  
LLC. The presence of YouTube upload functionality in this product is not an  
endorsement or recommendation of the product by YouTube, LLC.  
Power Supply  
Charging  
If the [CHARGE] lamp flashes red...  
• Charging cannot be performed because ambient temperature or the temperature of  
the charger is too hot or too cold. Leave the camera in a location whose  
temperature is within the range where charging can be performed. When the  
camera returns to a temperature where charging can be performed, the [CHARGE]  
lamp will light red.  
• Check if the charger and battery contacts are dirty. If contacts are dirty, wipe them  
clean with a dry cloth.  
If problems continue to occur after you perform the above steps, it could mean that  
the battery is faulty. Contact your nearest CASIO authorized service center.  
To replace the battery  
1. Open the battery cover and  
remove the current battery.  
With the monitor screen side of the  
camera facing upwards, slide the  
stopper in the direction indicated by  
the arrow in the illustration. After the  
battery pops out, pull it the rest of the  
way out of the camera.  
Stopper  
2. Load a new battery.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
170  
B
         
Battery Precautions  
. Precautions during Use  
• Operation provided by a battery under cold conditions is always less than operation  
under normal temperatures. This is due to the characteristics of the battery, not the  
camera.  
• Charge the battery in an area where the temperature is within the range of 5°C to  
35°C (41°F to 95°F). Outside this temperature range charging can take longer than  
normal or even fail.  
• Do not tear or remove the battery outer label.  
• If a battery provides only very limited operation following a full charge, it probably  
means the battery has reached the end of its service life. Replace the battery with a  
new one.  
. Storage Precautions  
• Storing the battery for a long time while it is charged can cause deterioration of  
battery characteristics. If you do not plan to use a battery for some time, fully use  
up its charge before storing it.  
• Always remove the battery from the camera when you are not using it. A battery left  
in the camera can discharge and go dead, which will require some time to charge  
when you need to use the camera.  
• Store batteries in a cool, dry place (20°C (68°F) or lower).  
• To prevent over discharging of an unused battery, fully charge it, and then load it in  
the camera and fully use up the charge about once every six months.  
Using the Camera in another Country  
. Precautions during Use  
• The bundled charger is designed for operation with any power supply in the range  
of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power cord  
plug depends on each country or geographic area. Before taking the camera and  
charger along on a trip, check with travel agent about the power supply  
requirements in your destination(s).  
• Do not connect the charger to a power supply through a voltage converter or  
similar device. Doing so can lead to malfunction.  
. Extra Batteries  
• Taking along extra fully charged batteries (NP-110) is recommended while on a trip  
in order to avoid not being able to shoot images due to the battery going dead.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
171  
   
Using a Memory Card  
See page 20 for information about supported memory cards and how to load a  
memory card.  
To replace the memory card  
Press the memory card and then release it. This will  
cause it to pop out of the memory card slot slightly.  
Pull the card out the rest of the way and then insert  
another one.  
• Never remove a card from the camera while the  
back lamp is flashing green. Doing so can cause  
the image save operation to fail and even  
damage the memory card.  
. Using a Memory Card  
• SD memory cards, SDHC memory cards, and SDXC  
memory cards have a write protect switch. Use the  
switch when you need to guard against accidentally  
deleting data. Note, however, if you write protect an  
SD memory card you must then turn write protection  
off whenever you want to record to it, format it, or  
delete any of its images.  
Write enabled  
Write disabled  
• If a memory card starts to behave abnormally during  
image playback, you can restore normal operation by reformatting it (page 160).  
However, it is recommended that you always take along multiple memory cards  
whenever using the camera far away from the home or office.  
• As you record data to and delete data from a memory card a number of times, it  
loses its ability to retain data. Because of this, periodic re-formatting of a memory  
card is recommended.  
• Electrostatic charge, electrical noise, and other phenomena can cause data to  
become corrupted or even lost. Make sure that you always back up important data  
on other media (CD-R, CD-RW, hard disk, etc.)  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
172  
     
. Discarding or Transferring Ownership of a Memory Card or the  
Camera  
The format and delete functions of the camera do not actually delete files from the  
memory card. The original data remains on the card. Note that responsibility for the  
data on a memory card lies with you. The following procedures are recommended  
whenever you discard a memory card or the camera, or if you transfer ownership to  
another party.  
• When discarding a memory card, either physically destroy the memory card or use  
commercially available data delete software to completely delete the data on the  
memory card.  
• When transferring ownership of a memory card to another party, use commercially  
available data deletion software to completely delete the data on it.  
• Use the format function (page 160) to completely delete the data in built-in memory  
before discarding or transferring ownership of the camera.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
173  
Computer System Requirements for Bundled Software  
Computer system requirements are different for each of the applications. Be sure to  
check the requirements for the particular application you are trying to use. Note that  
the values provided here are minimum requirements for running each application.  
Actual requirements are greater, depending on the number of images and the sizes of  
the images being handled.  
0Windows  
YouTube Uploader for CASIO  
Operating System: Windows 7, Windows Vista, Windows XP (SP2/SP3),  
Windows 2000 (SP4)  
Other  
: Sufficient memory to run the operating system  
Computer configuration that enables playback of movies on the  
YouTube site  
Computer configuration that enables upload of movies to the  
YouTube site  
Photo Transport 1.0  
Operating System  
Memory  
: Windows 7, Windows Vista, Windows XP, Windows 2000  
: At least 64MB  
Hard Disk Drive Space: At least 2MB  
Adobe Reader 9  
Operating System  
: Windows 7, Windows Vista, Windows XP (SP2/SP3),  
Windows 2000 (SP4)  
Memory  
: At least 128MB (256MB recommended)  
Hard Disk Drive Space: At least 335MB  
Other  
: Internet Explorer 6.0 or higher installed  
For details about the minimum system requirements for each software application,  
see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes  
bundled with the camera.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B
174  
   
Reset Initial Default Settings  
The tables in this section show the initial default settings that are configured for menu  
items (displayed when you press [MENU]) after you reset the camera (page 160).  
Menu items depend on whether the camera is in the REC mode or PLAY mode.  
• A dash (–) indicates an item whose setting is not reset or an item for which there is  
no reset setting.  
IMPORTANT!  
• Switching from “Auto” to “Premium Auto” (page 25) will make some menu items  
unavailable.  
. REC Mode  
“REC” Tab  
Zoom (SR)  
Focus  
Single  
Icon Help  
On  
Q(Auto Focus)  
HS BEST SHOT:  
Off / BEST SHOT:  
Off / Flash: On /  
Focus: Off / ISO:  
Off / White  
Balance: Off / EV  
Shift: Off /AF Area:  
On / Metering: Off /  
Self-timer: Off /  
Flash Intensity:  
Off / Zoom (SR):  
On / Digital Zoom:  
On / MF Position:  
Off / Zoom  
Self-timer  
Anti Shake  
AF Area  
Off  
DAuto  
ÍSpot  
On  
AF Assist Light  
Face Detection  
Continuous AF  
Digital Zoom  
L/R Key  
Memory  
Off  
Off  
On  
Off  
Grid  
Off  
Position: Off  
Review  
Off  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
175  
B
   
“Quality” Tab  
T
Quality  
(Snapshots)  
Flash Intensity  
Color Filter  
Sharpness  
Saturation  
Contrast  
0
Normal  
FHD  
Off  
0
»
Quality  
(Movies)  
Metering  
Lighting  
0
BMulti  
0
On  
“Set Up” Tab  
Screen  
Auto  
Adjust  
Auto Rotate  
On  
Date Style  
Language  
Sleep  
Startup: Sound 1 /  
Half Shutter:  
Sound 1 /  
1 min  
Auto Power Off 5 min  
Shutter: Sound 1 /  
Operation:  
Sound 1 /  
Sounds  
REC/PLAY  
USB  
Power On  
Mass Storage  
=Operation:  
...////  
=Play: ...////  
/
Video Out  
HDMI Output  
Startup  
Auto  
Off  
File No.  
Continue  
Create Folder  
World Time  
Timestamp  
Format  
Home  
Off  
Reset  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
176  
. PLAY Mode  
“PLAY” Tab  
Images: All images /  
Time: 30 min /  
Interval: 3 sec /  
Effect: Pattern 1  
Brightness  
DPOF Printing  
Protect  
Slideshow  
Rotation  
Dynamic Photo  
Resize  
Movie  
Converter  
Trimming  
Copy  
MOTION PRINT Create  
Movie Editing  
Lighting  
Divide Group  
CS Multi Print  
CS Frame Edit  
White Balance  
“Set Up” Tab  
• The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
177  
When things don’t go right...  
Troubleshooting  
Problem  
Possible Cause and Recommended Action  
Power Supply  
Power does not  
turn on.  
1)The battery may not be loaded correctly (page 17).  
2)The battery may be dead. Charge the battery (page 16). If the  
battery goes dead soon after being charged, it means the  
battery has reached the end of its life and needs to be  
replaced. Purchase a separately available CASIO NP-110  
rechargeable lithium ion battery.  
The camera  
suddenly powers  
down.  
1)Auto Power Off may have activated (page 157). Turn power  
back on.  
2)The battery may be dead. Charge the battery (page 16).  
3)The camera’s protection function may have activated  
because camera temperature is too high. Turn off the camera  
and wait until it cools down before trying to use it again.  
Power will not turn Remove the battery from the camera and then reload them.  
off. Nothing  
happens when a  
button is pressed.  
Image Recording  
r
] (REC) to enter  
Image is not  
1)If the camera is in the PLAY mode, press [  
the REC mode.  
recorded when the  
shutter button is  
pressed.  
2)If the flash is charging, wait until the charge operation  
finishes.  
3)If the message “Memory Full” appears, transfer images to  
your computer, delete images you no longer need, or use a  
different memory card.  
Auto Focus does  
1)If the lens is dirty, clean it off.  
not focus properly. 2)The subject may not be in the center of the focus frame when  
you compose the image.  
3)The subject you are shooting may not be a type that is  
compatible with Auto Focus (page 32). Use manual focus  
(page 83).  
4)You may be moving the camera when shooting. Try shooting  
with Anti Shake or use a tripod.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
178  
   
Problem  
Possible Cause and Recommended Action  
The subject is out  
of focus in the  
The image may not be focused properly. When composing the  
image, make sure the subject is located inside the focus frame.  
recorded image.  
?
The flash does not 1)If  
(Flash Off) is selected as the flash mode, change to  
fire.  
another mode (page 40).  
2)If the battery is low, charge it (page 16).  
?
3)If a BEST SHOT scene that uses  
(Flash Off) is selected,  
change to a different flash mode (page 40) or select a  
different BEST SHOT scene (page 63).  
The ?(Flash Off) The flash unit may be malfunctioning. Contact a CASIO  
icon flashes red on authorized service center or your original retailer. Note that  
the monitor screen though the flash will not fire, you still can use the camera for  
and the flash does non-flash shots.  
not fire.  
Camera powers  
down during Self-  
timer countdown.  
The battery may be low. Charge the battery.  
The monitor screen 1)You may be using Manual Focus and have not focused the  
image is out of  
focus.  
image. Focus the image (page 83).  
´
2)You may be using  
(Macro) for scenery or portraits. Use  
Auto Focus for scenery and portrait shots (page 83).  
)
3)You may be trying to use Auto Focus or  
shooting a close-up shot. Use the  
(page 83).  
(Infinity) when  
´
(Macro) for close ups  
There is digital  
noise in images.  
1)Sensitivity may have been increased automatically for a dark  
subject, which increases the chance of digital noise. Use a  
light or some other means to illuminate the subject.  
?
2)You may be attempting to shoot in a dark location with  
(Flash Off) selected, which can increase digital noise and  
make images appear coarse. In this case, turn on flash (page  
40) or use lights for illumination.  
3)Lighting (page 95) may be enabled for snapshots, which can  
cause an increase in digital noise. Use a light or some other  
means to illuminate the subject.  
4)Shooting movies for long periods in areas where temperature  
is relatively high can cause digital noise (dots of light) to  
appear in the movie image. If this happens, move to a cooler  
environment or turn off the camera and allow it to cool down,  
which should cause normal operation to resume.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
179  
Problem  
Possible Cause and Recommended Action  
A recorded image  
was not saved.  
1)Camera power may have been turned off before the save  
operation was complete, which will result in the image not  
being saved. If the battery indicator shows  
battery as soon as possible (page 18).  
, charge the  
2)You may have removed the memory card from the camera  
before the save operation was complete, which will result in  
the image not being saved. Do not remove the memory card  
before the save operation is complete.  
Though available  
lighting is bright,  
Not enough light is reaching the subjects. Change the flash  
<
mode setting to  
(Flash On) for daylight synchro flash (page  
the faces of people 40), or adjust EV shift to the + side (page 39).  
in the image are  
dark.  
Night shots come  
out bad.  
Use the following BEST SHOT scenes (page 63) when shooting  
at night.  
• High Speed Night Scene (for shooting night scenery only)  
• High Speed Night Scene and Portrait (for shooting people  
against night scenery)  
Subjects are too  
Sunlight reflected by water, sand, or snow, can cause  
<
dark when shooting underexposure of images. Change the flash mode setting to  
images in a  
seashore or ski  
area.  
(Flash On) for daylight synchro flash (page 40), or adjust EV  
shift to the + side (page 39).  
Digital zoom will  
not go up to the  
maximum value.  
1)The digital zoom setting may be turned off. Turn on digital  
zoom (page 91).  
2)Zoom will not go up to the maximum value if the “Zoom (SR)”  
setting is “Single”. Change the setting to “Off” (page 45).  
3)Zoom will not go up to the maximum value if the snapshot  
size setting is “VGA”. Change to a different setting (page 34).  
The image is out of 1)Focusing may not be possible because the subject is outside  
focus during movie  
recording.  
the focus range. Shoot within the allowable range.  
2)The lens may be dirty. Clean the lens (page 167).  
3)During High Speed Movie recording, focus is fixed at the  
position where it was when recording started. To focus an  
image, half-press the shutter button for Auto Focus or focus  
manually before you press [0] (Movie) to start recording.  
Movie recording  
suddenly stops.  
The camera’s protection function may have activated because  
camera temperature is too high. Wait until the camera  
temperature drops to normal levels.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
180  
Problem  
Playback  
Possible Cause and Recommended Action  
The color of the  
playback image is  
Sunlight or light from another source may be shining directly  
into the lens when you are shooting. Position the camera so  
different from what sunlight does not shine directly into the lens.  
appears on the  
monitor screen  
when shooting.  
Images are not  
displayed.  
This camera cannot display non-DCF images recorded onto a  
memory card using another digital camera.  
Images cannot be  
edited (with White  
Balance,  
Note that you cannot edit the following types of snapshots.  
• Snapshots created using MOTION PRINT  
• CS group snapshots  
Brightness, Resize, • Movies  
Trimming,  
Rotation).  
• Snapshots recorded with another camera  
File Deletion  
A file cannot be  
deleted.  
The file may be protected. Unprotect the file (page 116).  
Other  
The wrong date  
and time are  
The date and time setting is off. Set the correct date and time  
(page 155).  
displayed, or the  
wrong date and  
time are being  
stored along with  
image data.  
The messages on  
the display are in  
the wrong  
The wrong display language is selected. Change the display  
language setting (page 156).  
language.  
Images cannot be  
transferred over a  
USB connection.  
1)The USB cable may not be connected securely. Check all  
connections.  
2)The wrong USB communication protocol is selected. Select  
the correct USB communication protocol in accordance with  
the type of device you are connecting (pages 134, 143).  
3)If the camera is not turned on, turn it on.  
4)Your computer may not be able to recognize the camera if  
you connect via a USB hub. Always connect directly to the  
computer’s USB port.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
181  
Problem  
Possible Cause and Recommended Action  
Languageselection 1)You did not configure initial settings after purchasing the  
screen appears  
when the camera is  
turned on.  
camera or the camera may have been left with a dead  
battery. Configure the correct settings (pages 19, 156).  
2)There may be a problem with the camera’s memory data. If  
this is the case, perform the reset operation to initialize the  
camera’s setup (page 160). After that, configure each setting.  
If the language selection screen does not re-appear when you  
turn the camera on, it means that the camera’s memory  
management data has been restored.  
If the same message appears after you turn power back on,  
contact your retailer or a CASIO authorized service center.  
The time and date Load the camera’s battery and reconfigure the time and date  
settings configured settings (page 19). Do not remove the battery from the camera  
the first time after  
purchasing the  
for at least 24 hours after configuring time and date settings.  
After that, the settings will not be reset if you remove the  
camera are reset to battery.  
their factory  
• If the time and date are reset to their factory default settings  
defaults when I  
remove the  
camera’s battery.  
when you remove the battery after it has been loaded for  
more than 24 hours, it could mean that the camera’s setting  
memory is defective. Contact your retailer or a CASIO  
authorized service center.  
Buttons are not  
responsive right  
With large capacity memory cards there is a delay after the  
power has been turned on before the buttons become  
after the power has responsive.  
been turned on.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
182  
Display Messages  
The camera’s protection function may have activated  
because camera temperature is too high. Turn off the  
camera and wait until it cools down before trying to use it  
again.  
ALERT  
Battery is low.  
Battery power is low.  
The image you specified with the slideshow “Images”  
Cannot find the file. setting cannot be found. Change the “Images” setting (page  
109) and try again.  
You are attempting to save a user BEST SHOT scene in  
the “SCENE” folder when the folder already contains 999  
user scenes.  
Cannot register any  
more files.  
1)There is something wrong with the memory card. Turn off the  
camera, remove the memory card and then reload it into the  
camera. If this message re-appears when you turn the  
camera back on, format the memory card (page 160).  
IMPORTANT!  
Card ERROR  
• Formatting a memory card deletes all its files. Before  
formatting, try transferring recoverable files to a  
computer or some other storage device.  
2)Are you trying to use an Eye-Fi card? This camera does not  
support use of an Eye-Fi card.  
You are attempting to connect the camera to a printer while  
Check connections! the camera’s USB settings are not compatible with the USB  
system of the printer (page 124).  
Files could not be  
saved because  
battery is low.  
Battery power is low, so an image file could not be saved.  
You are trying to record a file while there are already 9999  
files stored in the 999th folder. If you want to record more,  
delete files you no longer need (page 29).  
Folder cannot be  
created.  
This message appears and the camera turns off whenever  
the lens performs some unexpected operation. If the same  
message appears after you turn power back on, contact a  
CASIO authorized service center or your original retailer.  
LENS ERROR  
The Anti Shake unit of the camera may be malfunctioning.  
If the same message appears after you turn power back on,  
contact your retailer or a CASIO authorized service center.  
LENS ERROR 2  
Load paper!  
The printer ran out of paper while printing.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
183  
 
Memory is full with images you recorded and/or files saved  
by editing operations. When shooting with Prerecord CS,  
this message indicates that there is not enough memory  
capacity to record all of the pre-recorded images. Delete  
files you no longer need (page 29).  
Memory Full  
An error occurred while printing.  
• The printer is turned off.  
Printing Error  
• The printer generated an error, etc.  
Image compression could not be performed for some  
reason during image data recording. Perform a zoom  
operation to change the composition of the image and  
shoot it again.  
Record Error  
Your camera system is corrupted. Contact your retailer or a  
CASIO authorized service center.  
SYSTEM ERROR  
The LOCK switch of the SD, SDHC, or SDXC  
memory card loaded in the camera is in the  
locked position. You cannot store images to  
or delete images from a memory card that is  
locked.  
LOCK  
The card is locked.  
There are no files.  
There are no files in built-in memory or on the memory  
card.  
There are no  
printing images.  
Set up DPOF.  
There are currently no files specified for printing. Configure  
the required DPOF settings (page 127).  
There is no image to The setup you are trying to save is for an image that cannot  
register.  
be saved as a user BEST SHOT scene.  
This card is not  
formatted.  
The memory card loaded in the camera is not formatted.  
Format the memory card (page 160).  
This file cannot be  
played.  
The file you are trying to access is corrupted or is a type  
that cannot be displayed by this camera.  
This message will appear part way through an operation  
when you attempt to use a function that is not allowed in  
combination with another function.  
This function cannot  
be used.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
184  
B
Number of Snapshots/Movie Recording Time  
Snapshot  
Built-in Memory  
Approximate  
SD Memory Card  
(1GB*2) Snapshot  
Recording  
Image Size  
(Pixels)  
(Approx. 62.1MB*1  
Snapshot  
)
Image Quality  
Image File  
Size  
Recording Capacity  
Capacity  
12M  
(4000 3000)  
Fine  
Normal  
Fine  
7.87 MB  
6
9
96  
142  
111  
169  
120  
182  
x
4.13 MB  
6.87 MB  
3.62 MB  
5.66 MB  
3.0 MB  
3:2  
7
x
(4000 2656)  
Normal  
Fine  
11  
7
16:9  
(4000 2240)  
x
Normal  
11  
10M  
(3648 2736)  
Normal  
3.38 MB  
14  
214  
x
8M  
Fine  
Normal  
Fine  
4.59 MB  
2.46 MB  
2.99 MB  
1.72 MB  
2.0 MB  
8
12  
127  
193  
x
(3264 2448)  
5M  
12  
185  
x
(2560 1920)  
Normal  
Fine  
17  
266  
3M  
19  
290  
x
(2048 1536)  
Normal  
Fine  
1.25 MB  
430 KB  
290 KB  
26  
406  
VGA  
(640 480)  
80  
1224  
1667  
x
Normal  
109  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
185  
B
   
Movies  
Built-in Memory  
(Approx.  
SD Memory  
Image  
Quality  
(Pixels) /  
(Audio)  
File Size  
of  
1-minute  
Movie  
Card (1GB*2  
Movie  
)
Maximum  
File Size  
Movie  
Mode  
Approximate Data  
Rate (Frame Rate)  
62.1MB*1) Movie  
Recording  
Recording  
Capacity  
Capacity  
FHD  
(1920 1080)  
(Stereo)  
14.4 Megabits/second  
(30 frames/second)  
8 minutes  
17 seconds  
x
32 seconds  
2 minutes  
108.0 MB  
29.3 MB  
FHD/  
STD  
STD  
(640 480)  
3.9 Megabits/second  
(30 frames/second)  
30 minutes  
38 seconds  
x
(Stereo)  
240 fps  
(432 320)  
(No audio)  
Maximum 30.0 Megabits/second  
3 minutes  
59 seconds  
x
15 seconds  
19 seconds  
225.0 MB  
180.0 MB  
Movie  
Size:  
4 GB  
(240 frames/second)  
480 fps  
24.0 Megabits/second  
(480 frames/second)  
5 minutes  
3 seconds  
x
(224 160)  
HS  
(No audio)  
30-240 fps  
(432 320)  
(Audio  
recording at  
30 fps only)  
4.1 Megabits/second  
(30 frames/second)  
x
1 minute  
29 minutes  
30.8 MB*3  
30.4 Megabits/second 55 seconds*3 13 seconds*3  
(240 frames/second)  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
186  
 
Built-in Memory  
(Approx.  
SD Memory  
Card  
(Maximum  
recording time  
per recording)  
Movie  
Mode  
Image Quality  
(Pixels) / (Audio)  
Maximum  
File Size  
Approximate Data  
Rate (Frame Rate)  
62.1MB*1) Movie  
Recording  
Capacity  
YouTube (HS240)  
(432 320)  
(No audio)  
30.0 Megabits/second  
(240 frames/second)  
1 minute  
52 seconds  
x
15 seconds  
19 seconds  
1 minute  
YouTube (HS480)  
24.0 Megabits/second  
(480 frames/second)  
x
(224 160)  
56 seconds  
15 minutes*3  
(No audio)  
Maximum  
Movie Size:  
2048 MB  
(or  
YouTube (HS30-240)  
4.1 Megabits/second  
(30 frames/second)  
YouTube  
Capture  
Mode  
x
(432 320)  
(Audio recording at  
30 fps only)  
30.4 Megabits/second 55 seconds*3  
(240 frames/second)  
15 minutes)  
YouTube (FHD)  
(1920 1080)  
(Stereo)  
14.4 Megabits/second  
32 seconds  
x
15 minutes  
15 minutes  
(30 frames/second)  
YouTube (STD)  
(640 480)  
(Stereo)  
3.9 Megabits/second  
2 minutes  
x
(30 frames/second)  
*1 Built-in memory capacity after formatting  
*2 The above values are based on use of a PRO HIGH SPEED SD memory card  
(Panasonic Corporation). The number of images you can save depends on the type of  
memory card you are using.  
*3 Recordable time when the entire movie is recorded at 30 fps. Recording time is shorter  
if the 30 fps frame rate is switched to 240 fps during recording.  
• Snapshot and movie recording capacity values are approximate and intended for  
reference only. Actual capacity depends on image contents.  
• File size and data rate values are approximate and intended for reference only. Actual  
values depend on the type of image being shot.  
• When using a memory card with a different capacity, calculate the number of images as a  
percentage of 1GB.  
• The time it takes to play back a high speed movie will be different from the time it takes to  
record it. If you record a 240 fps high speed movie for 10 seconds, for example, it will  
take 80 seconds to play it back.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
187  
 
Specifications  
File Format  
Snapshots:  
JPEG (Exif Version 2.3; DCF 2.0 standard; DPOF compliant)  
Movies:  
MOV format, H.264/AVC standard, IMA-ADPCM (stereo)  
Recording Media  
Built-in Memory (Image Storage Area: 62.1MB*)  
SD/SDHC/SDXC  
* Built-in memory capacity after formatting  
Recorded Image Sizes Snapshots:  
x
x
x
12M (4000 3000), 3:2 (4000 2656), 16:9 (4000 2240),  
10M (3648 2736), 8M (3264 2448), 5M (2560 1920),  
3M (2048 1536), VGA (640 480)  
Movies:  
FHD (1920 1080 30 fps), STD (640 480 30 fps),  
x
x
x
x
x
x
x
x
x
HS480 (224 160 480 fps), HS240 (432 320 240 fps),  
HS30-240 (432 320 30-240 fps switchable)  
x
Image Deletion  
1 file; selected files; all files  
1 CS group; 1 image in CS group; selected images in CS group  
(with memory protection feature)  
Effective Pixels  
Imaging Element  
12.1 Megapixels  
Size: 1/2.3-inch square pixel high-speed CMOS  
Total Pixels: 12.75 Megapixels  
Lens/Focal Distance  
(Snapshot)  
F3.0 (W) to 5.9 (T) f = 5.0 to 35.0 mm  
(equivalent to 28 to 196 mm in 35 mm format)  
8 lenses in 7 groups, including aspherical lens.  
Zoom  
7X Optical zoom, 10.5X in combination with Single SR Zoom,  
14X in combination with Multi SR Zoom (10M size)  
4X Digital zoom  
Up to 111.6X when HD Zoom and Digital zoom are used in  
combination (VGA size)  
Focusing  
Contrast Detection Auto Focus  
• Focus Modes:  
Auto Focus, Macro Focus, Infinity, Manual Focus  
• AF Area:  
Intelligent, Spot, Tracking; with AF assist light  
9
9
) (Wide Angle)  
Approximate Focus  
Range (Snapshot)  
(From Lens Surface)  
Auto Focus: 2 cm to  
(0.8" to  
Macro Focus: 2 cm to 50 cm (0.8" to 19.7") (Wide Angle)  
9
Infinity:  
Manual Focus: 2 cm to  
* Range is affected by optical zoom.  
(Wide Angle)  
9
9
) (Wide Angle)  
(0.8" to  
Metering  
Multi-pattern, center weighted, and spot by imaging element  
Program AE  
Exposure Control  
Exposure  
–2.0 EV to +2.0 EV (in 1/3EV steps)  
Compensation  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
188  
 
Shutter  
CMOS electronic shutter, mechanical shutter  
Shutter Speed  
Snapshot (Auto): 1 to 1/2000 second  
Snapshot (Night Scene): 4 to 1/2000 second  
* May differ due to the camera setup.  
Aperture Value  
White Balance  
F3.0 (W) to F8.8 (W) (ND filter)  
* Using optical zoom changes the aperture value.  
Auto, Daylight, Overcast, Shade, Day White Fluorescent,  
Daylight Fluorescent, Tungsten, Manual WB  
Sensitivity  
Snapshots:  
(Standard Output  
Sensitivity)  
Auto, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600,  
ISO 3200 equivalent  
Movies: Auto  
Self-timer  
Approximate Trigger Times:  
10 seconds, 2 seconds, Triple Self-timer  
Flash Modes  
Flash Range  
Auto, Off, On, Red-eye reduction  
0.3 m to 3.7 m (1.0' to 12.1') (Wide Angle)  
(ISO Sensitivity: Auto) 0.6 m to 1.9 m (2.0' to 6.2') (Telephoto)  
* Range is affected by optical zoom.  
Flash Intensity  
Adjustment  
–2, –1, 0, +1, +2  
Flash Charging Time Approximately 5 seconds  
Movie Recording  
24 lx (FHD/STD movie)  
Minimum Illumination  
Recording  
Snapshot (Auto/Premium Auto), High Speed Continuous  
Shutter, Prerecord (Continuous Shutter),  
F Continuous Shutter, BEST SHOT, HS BEST SHOT, Face  
detection, Super Resolution, Macro, Self-timer, High speed  
movie (For “30-240 fps”, audio recording supported during  
30 fps recording only), FHD Movie, STD Movie, Prerecord  
(Movie), YouTube Capture Mode  
Monitor Screen  
Viewfinder  
3.0-inch TFT color LCD (Super Clear LCD)  
460,800 (960 480) dots  
x
Monitor Screen  
Timekeeping  
Functions  
Built-in quartz digital clock  
Date and Time: Recorded with image data  
Auto Calendar: To 2049  
World Time  
162 cities in 32 time zones  
City name, date, time, summer time  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
189  
   
External connection  
terminal  
USB port (Hi-Speed USB compatible),  
AV output terminal (NTSC/PAL)  
HDMI output (Mini)  
Microphones  
Speaker  
Stereo  
Monaural  
x
Power Requirements Rechargeable lithium ion battery (NP-110)  
1
Approximate Battery Life  
All of the values provided below represent the approximate amount of time under  
normal temperature (23°C (73°F)) before the camera turns off. These values are not  
guaranteed. Low temperatures shorten battery life.  
Number of Shots (CIPA) (Operating Time)*1  
Continuous Playback (Snapshots)*2  
290 shots  
3 hours 45 minutes  
Approximate continuous movie recording time  
(High speed movie (HS 240))*3  
1 hour 55 minutes  
Approximate continuous movie recording time (FHD Movie)*3 1 hour 30 minutes  
• Battery: NP-110 (Rated Capacity: 1200 mAh)  
• Recording Medium: 1GB SD memory card (PRO HIGH SPEED (Panasonic  
Corporation))  
• Measurement Conditions  
*1 Approximate number of shots (CIPA) (Operating Time)  
In accordance with CIPA (Camera and Imaging Products Association) standards  
Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide and  
full telephoto every 30 seconds, during which two images are shot with flash; power  
turned off and back on every time 10 images are shot.  
*2 Approximate playback time  
Standard temperature (23°C (73°F)), one-image scroll approximately every 10 seconds  
*3 Approximate time using a 16GB SDHC memory card for a repeated cycle of 10 minutes  
recording followed by deletion of the recorded file.  
• The above values are based a new battery, starting from a full charge. Repeated  
charging shortens battery life.  
• Frequency of flash, zoom, High Speed Continuous Shutter, and Auto Focus usage,  
and the time the camera is on greatly affects recording time and number of shots  
values.  
Power Consumption  
Dimensions  
3.7 V DC, Approximately 4.7 W  
x
x
101.9 (W) 58.7 (H) 27.4 (D) mm  
x
x
(4.0" (W) 2.3" (H) 1.1" (D))  
(22.6 mm (0.89") thick excluding projections)  
Weight  
176 g (6.2 oz) (including battery and memory card)  
149 g (5.3 oz) (excluding battery and memory card)  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
190  
 
. Rechargeable lithium ion battery (NP-110)  
Rated Voltage  
3.7 V  
Rated Capacitance  
1200 mAh  
Operating Temperature  
Requirements  
0 to 40°C (32 to 104°F)  
x
x
Dimensions  
37.5 (W) 44.9 (H) 7.0 (D) mm  
x
x
(1.48" (W) 1.77" (H) 0.28" (D)) (excluding projections)  
Weight  
Approximately 25 g (0.9 oz)  
. Charger unit (BC-110L)  
Input Power  
100 to 240 V AC, 80 mA, 50/60 Hz  
Output Power  
4.2 V DC, 600 mA  
Operating Temperature  
Requirements  
5 to 35°C (41 to 95°F)  
Supported Battery Type  
Charging Time  
Rechargeable lithium ion battery (NP-110)  
180 minutes  
x
x
Dimensions  
54 (W) 20 (H) 83 (D) mm  
x
x
(2.1" (W) 0.79" (H) 3.3" (D)) (excluding projections)  
Weight  
Approximately 50 g (1.8 oz)  
• Power cord precautions for use in Singapore  
The power cord set is not supplied. The power cord used must comply with  
relevant national and/or international standards.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
191  
CASIO COMPUTER CO.,LTD.  
6-2, Hon-machi 1-chome  
Shibuya-ku, Tokyo 151-8543, Japan  
MF  
MA1101-C  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E
Getting the Most Out of Dynamic Photo  
For a wealth of information about Dynamic Photo including  
explanations about how to use Dynamic Photo images, the Dynamic  
Studio image conversion service, sample images, and more, visit the  
special Dynamic Photo website at:  
http://dp.exilim.com/  
This manual provides an introduction to Dynamic Photo, which creates a whole new  
way to enjoy digital imaging.  
• All screen shots shown in this manual are in English. However, the camera allows  
you to select another display language, if you want.  
Contents  
Creating a Dynamic Photo Image ............................................................................... 3  
Step 2: Create the Dynamic Photo image. ............................................................................. 3  
Step 3: Have fun with Dynamic Photo.................................................................................... 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dynamic Photo! A totally new way to enjoy digital  
photography!  
Dynamic Photo provides an easy way to insert built-in subjects into snapshots and  
movies for a whole new way to enjoy digital imaging.  
You can create a Dynamic Photo image by inserting a built-in moving subject into a  
background image (snapshot or movie). Before performing the following steps, you  
should record the background image (snapshot or movie) into which you want to  
insert the moving subject.  
• The term “built-in subjects” refers to the moving figures and characters that came  
pre-programmed in the camera’s built-in memory.  
Background Image  
Built-in Subject  
Dynamic Photo Image  
Download from Www.Somanuals.com. All ManDuyanlasmSicePahorctoh! AAtontdallyDnoeww nwaloyatode.njoy digital  
2
photography!  
 
Creating a Dynamic Photo Image  
Your digital camera comes with a number of subjects in its built-in memory (“built-in  
subjects”). You can use these built-in subjects to create Dynamic Photo images by  
inserting them into your original snapshots or movies.  
Step 1: Shoot the image into which you want to insert  
an built-in subject.  
1. Remove the memory card from the camera  
(if one is loaded).  
You will not be able to access the built-in subjects  
while a memory card is loaded in the camera.  
2. In the REC mode, compose the image and press  
the shutter button to shoot a standard  
snapshot.  
You will insert the built-in subject into the snapshot you  
shoot here.  
Step 2: Create the Dynamic Photo image.  
Now simply insert a built-in subject into the snapshot or movie you shot in step 1 to  
create your own original Dynamic Photo image.  
1. Press [p] to enter the PLAY mode.  
2. Perform the following operation on the camera  
[MENU] * PLAY tab * “Dynamic Photo”.  
3. Use [4] and [6] to select the background image  
you want and then press [SET].  
Select the image you want to use as the background.  
Here, select the image you recorded in step 1 of this  
procedure.  
* Only images that are able to be used as background images  
will appear for selection at this time.  
• Only an image that satisfies the following conditions can be used as a  
background image.  
– A snapshot or movie recorded with this camera or a snapshot transferred to  
this camera’s memory using Photo Transport  
– A snapshot with an aspect ratio of 4:3  
Creating a Dynamic Photo Image  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
     
4. Use [4] and [6] to select the built-in subject that  
you want to insert into the image and then press  
[SET].  
* Only built-in subjects that can be inserted into other images  
will appear at this time.  
5. If you are inserting a subject into a movie an  
image will appear on the monitor screen  
showing the approximate location of the subject  
in the movie. Use [4] and [6] to shift the  
location to the position you want. After you are  
finished, press [SET].  
• If you insert a subject into a movie, the resulting  
movie will be a maximum of 20 seconds long.  
Everything before and after the insertion is cut off.  
Insert location  
If the movie you are inserting into (original movie) is shorter than 20 seconds,  
the resulting movie will be the same length as the original movie.  
• If you are inserting a subject into a snapshot, skip directly to step 6.  
6. Use the zoom controller to adjust the size of the  
subject and use [8], [2], [4], and [6] to adjust  
its position. When everything is the way you  
want, press [SET].  
This inserts the subject into another image and creates  
a Dynamic Photo.  
7. After creation of the Dynamic Photo image is  
complete, the finished image will appear on the  
monitor screen.  
Creating a Dynamic Photo Image  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Complete!  
• Inserting a built-in subject into a snapshot will save a Dynamic Photo that consists  
of 20 still images of 2M size or smaller.  
• Inserting a built-in subject into a movie will save the Dynamic Photo as a movie file.  
Important!  
• You will not be able to access the built-in subjects while a  
memory card is loaded in the camera. If you want to use  
the built-in subjects while a memory card is loaded in the  
camera, use the “Built-in * Card” copy operation to  
copy the built-in subjects from built-in camera memory to  
the memory card.  
• Performing a delete or format operation will not delete the  
built-in subjects.  
Creating a Dynamic Photo Image  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Step 3: Have fun with Dynamic Photo.  
You can use the Dynamic Photo image you created in Step 2 in a variety of fun ways.  
On the camera  
Dynamic Photo images play back automatically  
as soon as you display them on the EXILIM  
monitor screen.  
On a TV  
Connect your EXILIM to a TV with the AV  
cable and you can enjoy watching Dynamic  
Photo images on your TV screen.  
Step 4: Converting a Dynamic Photo Still Image to a Movie  
(Movie Converter).  
A Dynamic Photo with a still image background and a moving subject is stored as a  
series of 20 still images. You can use the following procedure to convert the  
20 images that make up a Dynamic Photo to a movie.  
1. Press [p] to enter the PLAY mode.  
2. Use [4] and [6] to display the Dynamic Photo  
you want to convert.  
3. Perform the following operation on the camera  
[MENU] * PLAY tab * “Movie Converter”.  
4. Press [SET] to convert the displayed Dynamic Photo.  
• The final movie format is H.264.  
• The final movie image size is 640 480 pixels.  
x
5. Save the converted Dynamic Photo to your computer.  
Creating a Dynamic Photo Image  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
   
Step 5: Use Dynamic Studio to expand use of Dynamic Photo  
images to other applications.  
http://dynamicstudio.jp/  
Using the CASIO EXILIM Dynamic Photo feature to create a Dynamic Photo image  
with a moving subject produces a CS image that reproduces the movement of the  
character. Dynamic Studio is a free online service that lets you convert the CS image  
to a movie file for playback on a PC, digital photo frame, cell phone, or other device.  
Now you can enjoy your Dynamic Photo images on a virtually unlimited number of  
different devices.  
* Dynamic Studio service availability and content are subject to change without notice.  
On a PC  
Enjoy watching Dynamic  
Photo images on your PC  
screen.  
In a digital photo  
frame  
Play Dynamic Photo images  
in a digital photo frame.  
On a cell phone  
Share with your friends  
View Dynamic Photo images on your cell phone Send the Dynamic Studio  
screen.  
URL to your friends and share  
your Dynamic Photo  
creations with them.  
e-Greeting Cards  
For presentations  
Send animated e-greeting cards to your special Animation GIF files can be  
friends and family members.  
included in presentation data for  
an impression that really lasts.  
Creating a Dynamic Photo Image  
MA1010-A 1168  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
 

Bernina Stereo Receiver VSX LX60 User Manual
Black Box Network Router 1001 User Manual
Blaupunkt Car Stereo System CC 28 User Manual
BOB Stroller OMS03A User Manual
Bosch Appliances Security Camera X40 SN User Manual
Bosch Appliances Vacuum Cleaner BSA2UC User Manual
Braun Mixer MR 320 User Manual
Brother Printer 5250DN User Manual
Cenix Digicom Camera Accessories 67980 User Manual
Chicago Electric Work Light 93255 User Manual