E
Digital Camera
EX-Z750
User’s Guide
Thank you for purchasing this CASIO
product.
• Before using it, be sure to read the
precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for
future reference.
• For the most up-to-date information about
this product, visit the official EXILIM
Website at http://www.exilim.com/.
K842PCM1DMX
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Monitor Screen Contents ........................................... 26
Contents
REC Modes
26
29
30
PLAY Mode
Changing the Contents of the Monitor Screen
2
INTRODUCTION
Attaching the Strap .................................................... 32
Power Requirements .................................................. 33
Unpacking .................................................................... 2
Features ....................................................................... 9
Precautions ................................................................ 13
Loading the Rechargeable Battery
To charge the battery
To replace the battery
Power Supply Precautions
Turning the Camera On and Off
Configuring Power Saving Settings
33
34
39
40
43
45
18 QUICK START GUIDE
Using the On-screen Menus ...................................... 46
Configuring Display Language and Clock Settings ... 49
First, charge the battery! ............................................ 18
To configure display language and clock settings ..... 19
To record an image .................................................... 20
To view a recorded image .......................................... 21
To delete an image ..................................................... 21
To configure display language and clock settings
50
52 BASIC IMAGE RECORDING
Recording an Image ................................................... 52
Specifying the Recording Mode
Aiming the Camera
Recording an Image
52
53
54
22 GETTING READY
About This Manual ..................................................... 22
General Guide ............................................................ 23
Using the Optical Viewfinder ...................................... 60
Using Zoom ................................................................ 61
Camera
23
25
Optical Zoom
Digital Zoom
61
62
USB Cradle
Download from Www.Somanuals.com. All Manuals Search And Download.
3
INTRODUCTION
Using the Flash .......................................................... 64
Using the BEST SHOT Mode .................................... 93
Displaying 12 BEST SHOT Sample Scenes
Flash Unit Status
66
66
67
Changing the Flash Intensity Setting
Using Flash Assist
on a Single Screen
Creating Your Own BEST SHOT Setup
To delete a BEST SHOT user setup
95
96
98
Using the Self-timer ................................................... 69
Specifying Image Size ............................................... 71
Specifying Image Quality ........................................... 72
Recording Images of Business Cards and
Documents (Business Shot) ...................................... 98
To use Business Shot
100
Recording an ID Photo............................................. 101
Printing an ID Photo
102
74 OTHER RECORDING FUNCTIONS
Recording a Movie ................................................... 103
Selecting the Focus Mode ......................................... 74
Specifying Movie Image Quality
Recording a Standard Movie
(Movie Mode)
104
105
106
108
Using Auto Focus
75
78
79
80
80
82
Using the Macro Mode
Using Pan Focus
Using the Infinity Mode
Using Manual Focus
Using Focus Lock
Recording a Short Movie
(Short Movie Mode)
Recording Past Action
(Past Movie Mode)
Exposure Compensation (EV Shift) ........................... 83
Adjusting White Balance ............................................ 84
Instant Movie Setups
(MOVIE BEST SHOT Mode) .................................... 110
Displaying All of the MOVIE BEST SHOT Sample
Scenes on a Single Screen
Creating Your Own MOVIE BEST SHOT Setup
Configuring the White Balance Setting Manually
86
111
112
Using the Manual Exposure mode ............................ 87
Using a Continuous Shutter Mode............................. 89
Recording Audio ....................................................... 114
Using the Normal Continuous Shutter Mode
Using the Zoom Continuous Shutter Mode
25-shot Stop Action Images
90
91
Adding Audio to a Snapshot
Recording Your Voice
114
115
Using the Histogram................................................. 117
(Using the Multi Continuous Shutter Mode)
Continuous Shutter Precautions
92
93
Download from Www.Somanuals.com. All Manuals Search And Download.
4
INTRODUCTION
REC Mode Camera Settings.................................... 119
Displaying the 9-image View .................................... 145
Displaying the Calendar Screen .............................. 146
Playing a Slideshow ................................................. 147
Assigning Functions to the [̇] and [̈] Keys
Turning the On-screen Grid On and Off
Turning Image Review On and Off
Using Icon Help
Specifying Power On Default Settings
Specifying ISO Sensitivity
Selecting the Metering Mode
Specifying Outline Sharpness
Specifying Color Saturation
Specifying Contrast
120
121
121
122
123
125
126
127
127
128
128
Using the Photo Stand Feature
149
Rotating the Display Image ...................................... 150
Adding Audio to a Snapshot .................................... 152
To re-record audio
153
Playing Back a Voice Recording File ....................... 154
Displaying Camera Images on a TV Screen ........... 155
Resetting the Camera
Selecting the Video Output System
156
Using the Shortcut Menu (EX Menu)....................... 129
158 DELETING FILES
130 PLAYBACK
Deleting a Single File ............................................... 158
Deleting All Files ...................................................... 159
Basic Playback Operation ........................................ 130
Playing an Audio Snapshot
131
Zooming the Display Image ..................................... 132
Resizing an Image ................................................... 133
Cropping an Image................................................... 134
Playing and Editing a Movie..................................... 135
160 FILE MANAGEMENT
Folders...................................................................... 160
Memory Folders and Files
160
Playing a Movie
135
136
Protecting Files ........................................................ 161
Editing a Movie
To protect a single file
To protect all files in memory
161
162
Capturing a Still Image from a Movie
(MOTION PRINT)
140
Adjusting White Balance of a Recorded Image ....... 141
Adjusting Image Brightness ..................................... 143
Download from Www.Somanuals.com. All Manuals Search And Download.
5
B
INTRODUCTION
Using the FAVORITE Folder .................................... 162
Configuring [
] (REC) and [
] (PLAY) Power
To copy a file to the FAVORITE folder
To display a file in the FAVORITE folder
To delete a file from the FAVORITE folder
To delete all files from the FAVORITE folder
162
164
165
165
On/Off Functions ...................................................... 174
Formatting Built-in Memory...................................... 175
177 USING A MEMORY CARD
166 OTHER SETTINGS
Using a Memory Card .............................................. 178
To insert a memory card into the camera
To replace the memory card
Formatting a Memory Card
178
179
179
Changing the Brightness of the Monitor Screen ..... 166
Configuring Sound Settings ..................................... 166
To configure sound settings
166
167
Copying Files............................................................ 181
To copy all the files in built-in memory to a
To set the confirmation tone volume level
To set the audio volume level for movie and audio
snapshot playback
memory card
To copy a specific file from a memory card to
built-in memory
181
167
Specifying an Image for the Startup Screen ........... 168
182
Specifying the File Name Serial Number
Generation Method .................................................. 169
184 PRINTING IMAGES
Setting the Clock ...................................................... 169
To select your Home Time zone
To set the current time and date
Changing the Date Format
170
170
171
DPOF........................................................................ 185
To configure print settings for a single image
To configure print settings for all images
186
187
Using World Time ..................................................... 171
Using PictBridge or USB DIRECT-PRINT ............... 188
To display the World Time screen
To configure World Time settings
171
172
Date Printing
191
PRINT Image Matching III ............................................ 192
Changing the Display Language.............................. 173
Changing the USB Port Protocol ............................. 173
Exif Print ................................................................... 193
Download from Www.Somanuals.com. All Manuals Search And Download.
6
INTRODUCTION
Using the Camera with a Macintosh Computer ....... 227
194 VIEWING IMAGES ON A COMPUTER
About the bundled CD-ROM
227
228
229
230
230
Computer System Requirements
Managing Images on a Macintosh
Viewing User Documentation (PDF Files)
To register as a camera user
Using the Camera with a Windows Computer ......... 194
Using the Camera with a Macintosh Computer....... 202
Using a Memory Card to Transfer Images
to a Computer .......................................................... 207
231 APPENDIX
Memory Data............................................................ 208
DCF Protocol
208
209
210
Memory Folder Structure
Image Files Supported by the Camera
Menu Reference ....................................................... 231
Indicator Lamp Reference........................................ 234
Troubleshooting Guide ............................................. 237
212 USING THE CAMERA WITH A COMPUTER
If you have problems installing the USB driver...
Display Messages
242
243
Using the Camera with a Windows Computer ......... 212
Specifications ........................................................... 245
About the bundled CD-ROM
Computer System Requirements
Managing Images on a PC
Retouching, Reorienting, and Printing a Snapshot
Playing a Movie
212
214
216
219
221
224
225
226
226
Editing a Movie
Viewing User Documentation (PDF Files)
User Registration
Exiting the Menu Application
Download from Www.Somanuals.com. All Manuals Search And Download.
7
INTRODUCTION
IMPORTANT!
• Macintosh is a registered trademark of Apple
Computer, Inc.
• The contents of this manual are subject to change
without notice.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss resulting from
the use of this manual.
•
MultiMediaCard is a trademark of Infineon
Technologies AG of Germany, and licensed to the
MultiMediaCard Association (MMCA).
• Adobe and Reader are either registered trademarks
or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
• Ulead is a trademark of Ulead Systems,Inc.
• Other company, product and service names used
herein may also be trademarks or service marks of
others.
• Photo Loader and Photohands are the property of
CASIO COMPUTER CO., LTD. Except as stipulated
above, all copyrights and other related rights to these
applications revert to CASIO COMPUTER CO., LTD.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any loss or claims by third parties
which may arise through the use of the EX-Z750.
• CASIO COMPUTER CO., LTD. shall not be held
liable for any damages or losses suffered by you or
any third party due to the use of Photo Loader and/or
Photohands.
• CASIO COMPUTER CO., LTD. assumes no
responsibility for any damage or loss caused by
deletion of data as a result of malfunction, repairs, or
battery replacement. Be sure to back up all important
data on other media to protect against its loss.
• Note that the example screens and product
illustrations shown in this User’s Guide may differ
somewhat by the screens and configuration of the
actual camera.
• The SD logo is a registered trademark.
• Windows, Internet Explorer, Windows Media, and
DirectX are registered trademarks of Microsoft
Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
INTRODUCTION
I LCD Panel
Features
The LCD panel is a product of the latest LCD
manufacturing technology that provides a pixel yield of
99.99%. This means that less than 0.01% of the total pixels
are defective (they do not turn on or always remain turned
on).
• 7.2 million effective pixels
The CCD provides 7.41 million total pixels of very high-
resolution for crisp, clear, prints and display images.
• 2.5-inch TFT color LCD monitor screen
• 8.3MB flash memory
Images can be recorded without using a memory card.
I Copyright Restrictions
Except for the purposes of your own personal enjoyment,
unauthorized copying of snapshot files, movie files, and
audio files violates copyright laws and international
contracts.
Distribution to third parties of such files over the Internet
without permission of the copyright holder, whether for
profit or for free, violates copyright laws and international
contracts.
• Long battery life
A low-power design combines with a large-capacity
battery to provide more recording and playback between
charges.
• Bundled with a USB Cradle
The bundled USB cradle can be used to charge the
camera’s battery (page 34), to view images on a TV
screen (page 155), and to transfer images to a computer
(page 194). A Photo Stand feature lets you view images
while the camera is on the cradle (page 149).
• REC mode or PLAY mode power up (page 43)
Press [
] (REC) or [
] (PLAY) to turn on the camera
and enter the mode you want to use.
• AF assist light (page 57)
Improves auto focus accuracy when shooting under dim
lighting.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
B
INTRODUCTION
• 24X zoom (page 61)
• BEST SHOT (page 93)
3X optical zoom, 8X digital zoom
Simply select the sample scene that matches the type of
image you are trying to record and the camera performs
troublesome setups automatically for beautiful pictures
every time. New BEST SHOT sample scenes include
setups for ID photos, cross filter, and backlighting.
• Triple Self-timer (page 69)
The self-timer can be set up to repeat three times,
automatically.
• Quick Shutter (page 76)
• Business Shot (page 98)
When you press the shutter button all the way down
without pausing, the camera immediately records the
image without waiting for Auto Focus to be performed.
This helps to avoid missing a special moment while you
wait for the camera to Auto Focus.
Business Shot automatically corrects rectangular shapes
when recording the image of a business card, document,
whiteboard, or similar subjects from an angle.
• ID Photo Feature (page 101)
After recording a portrait, you can print a page that
contains a number of different versions in standard ID
photo dimensions.
• Auto Focus Area Selection (page 77)
When “
Multi” is selected for the Auto Focus area, the
camera takes simultaneous meter readings at nine
different points and automatically selects the best one.
• High-resolution movie recording with audio (page 103)
VGA size, 30 fps, MPEG-4 AVI format
When “
Free” is selected, you can move the Auto
Focus area to the location you want.
• A choice of movie modes (page 103)
• Three continuous shutter modes (page 89)
Movie modes include a standard Movie mode, a Short
Movie mode (movie is a preset length that starts before
the shutter button was pressed and ends after it is
pressed), and a Past Movie mode (movie starts from five
seconds before the shutter button was pressed), and a
MOVIE BEST SHOT mode (instant camera setup based
on MOVIE BEST SHOT sample scenes).
Normal continuous shutter continually records images as
long as memory is available to store them. In addition,
zoom continuous shutter (page 91) and multi continuous
shutter (page 92) provide plenty of versatility for capturing
exactly the type of image you want.
• MOTION PRINT (pages 106, 140)
Capture frames from a movie and create still images that
are suitable for printing.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
INTRODUCTION
• Audio Snapshot Mode (page 114)
Use this mode to record snapshots that also include
audio.
• After Recording (page 152)
Use this mode to add audio to snapshots after you record
them.
• Voice Recording (page 115)
• Selectable Sound Settings (page 166)
Quick and easy recording of voice input.
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or
all the way, or perform a key operation.
• Real-time RGB histogram (page 117)
An on-screen histogram lets you adjust exposure as you
view the effect on overall image brightness, which makes
shooting under difficult lighting conditions easier than
ever before.
• World Time (page 171)
A simple operation sets the current time for your current
location. You can select from among 162 cities in 32 time
zones.
• EX Menu (page 129)
• Support for SD memory cards and MMC (MultiMedia
Cards) for memory expansion (page 177)
EX Menu gives you short-cut menu access to four
frequently-used settings.
• Digital Print Order Format (DPOF) (page 185)
Images can be printed easily in the sequence you want
using a DPOF compatible printer. DPOF can also be used
when specifying images and quantities for printing by
professional print services.
• Built-in Image Editing Functions
Simple operations let you change the white balance
(page 141) and brightness (page 143) of images after
they are recorded.
• Calendar screen (page 146)
• PictBridge and USB DIRECT-PRINT support (page 188)
Connect directly to a PictBridge or USB DIRECT-PRINT
compatible printer and you can print images without going
through a computer.
A simple operation displays a full-month calendar on the
camera’s monitor screen. Each day of the full-month
calendar shows a thumbnail of the first file recorded for
that date, which helps to make searching for a particular
file quicker and easier.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
INTRODUCTION
III
• PRINT Image Matching
Compatible (page 192)
III
• Ulead Movie Wizard SE VCD (page 224)
Images include PRINT Image Matching
setting and other camera setup information). A printer that
III
data (mode
Bundled Ulead Movie Wizard SE VCD software lets you
edit movie files on your computer and create Video CDs.
Software can be upgraded to convert files so they can be
played by a DVD player.
supports PRINT Image Matching
reads this data and
adjusts the printed image accordingly, so your images
come out just the way you intended when you recorded
them.
• DCF Data Storage (page 208)
DCF (Design rule for Camera File system) data storage
protocol provides image compatibility between the digital
camera and printers.
• Bundled with Photo Loader and Photohands
(pages 216, 219, 229)
Your camera comes bundled with Photo Loader, the
popular application that automatically loads images from
your camera to your PC. It also comes with Photohands,
and application that makes image retouching quick and
easy.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
INTRODUCTION
• Never fire the flash while it is too close to the subject’s
eyes. Intense light from the flash can cause eye damage
if it is fired too close to the eyes. This is especially true
with young children. When using the flash, the camera
should be at least one meter (3.3´) from the eyes of the
subject.
Precautions
I General Precautions
Be sure to observe the following important precautions
whenever using the EX-Z750.
• Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the risk of fire and
electric shock. Never use the camera outdoors in the rain
or snow, at the seashore or beach, in the bathroom, etc.
• Should foreign matter or water ever get into the camera,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC adaptor power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the risk of fire and electric shock.
• Should you ever notice smoke or a strange odor coming
out of the camera, immediately turn it off. Next, taking
care you do not burn your fingers, remove the camera’s
battery and/or unplug the AC adaptor power cord from the
power outlet, and contact your dealer or nearest CASIO
authorized service center. Using the camera under these
conditions creates the risk of fire and electric shock. After
making sure there is no more smoke coming from the
camera, take it to your nearest CASIO authorized service
center for repair. Never attempt your own maintenance.
• Never use the AC adaptor to power any other device
besides this camera. Never use any other AC adaptor
besides the one that comes with this camera.
All references in this manual to “camera” refer to the
CASIO EX-Z750 Digital Camera.
• Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so
creates the risk of serious accident.
• Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electric shock when exposed. Always leave
maintenance and repair work up to a CASIO authorized
service center.
• Never look at the sun or any other bright light through the
camera’s viewfinder. Doing so can damage your eyesight.
• Keep the small parts and accessories of this camera out
of the reach of small children. If swallowed accidentally,
contact your physician immediately.
• Never fire the flash in the direction of a person operating
a motor vehicle. Doing so can interfere with the driver’s
vision and create the risk of accident.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
INTRODUCTION
• Never cover the AC adaptor with a quilt, blanket, or other
cover while it is in use, and do not use it near a heater.
• At least once a year, unplug the AC adaptor power cord
from the power outlet and clean the area around the
prongs of the plug. Dust build up around the prongs can
create the risk of fire.
• If the camera’s case should ever become cracked due to
dropping it or otherwise subjecting it to rough treatment,
immediately turn it off. Next, remove the camera’s battery
and/or unplug the AC adaptor power cord from the power
outlet, and contact your dealer or nearest CASIO
authorized service center.
I Test for proper operation before using the
camera!
Before using the camera to record important images, make
sure you first record a number of test images and check the
results to ensure that the camera is configured correctly
and operating properly.
• Never use the camera inside of an aircraft or in any other
area where its use is prohibited. Doing so creates the risk
of accident.
• Physical damage and malfunction of this camera can
cause the data stored in its memory to be deleted. Always
keep backup copies of data by transferring them to
personal computer memory.
• Never open the battery cover, disconnect the AC adaptor
from the camera, or unplug the AC adaptor from the wall
socket while an image is being recorded. Doing so will not
only make storage of the current image impossible, it can
also corrupt other image data already stored in file
memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
INTRODUCTION
I Data Error Precautions
I Operating conditions
• Your digital camera is manufactured using precision
digital components. Any of the following creates the risk
of corruption of data in file memory.
• This camera is designed for use in temperatures ranging
from 0°C to 40°C (32°F to 104°F).
• Do not use or keep the camera in the following areas.
— Removing the battery or memory card, or setting the
camera onto the USB cradle while the camera is
performing a record or memory access operation
— Removing the battery, removing the memory card, or
placing the camera onto the USB cradle while the
green operation lamp is still flashing after you turn off
the camera
— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject
to temperature extremes
— Inside of a closed vehicle, especially one parked in the
sun
— In areas subject to strong vibration
— Disconnecting the USB cable, removing the camera
from the USB cradle, or disconnecting the AC adaptor
from the USB cradle while a data communication
operation is being performed
— Low battery power
— Other abnormal operations
Any of the above conditions can cause an error message to
appear on the monitor screen (page 243). Follow the
instructions provided by the message to eliminate the
cause of the error.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
INTRODUCTION
I Condensation
I Power Supply
• When you bring the camera indoors on a cold day or
otherwise expose it to a sudden change of temperature,
there is the possibility that condensation can form on the
exterior or on interior components. Condensation can
cause malfunction of the camera, so you should avoid
exposing it to conditions that might cause condensation.
• To keep condensation from forming, place the camera
into a plastic bag before moving it into a location that is
much warmer or colder than your current location. Leave
it in the plastic bag until the air inside the bag has a
chance to reach the same temperature as the new
location. If condensation does form, remove the battery
from the camera and leave the battery cover open for a
few hours.
• Use only the special NP-40 rechargeable lithium ion
battery to power this camera. Use of any other type of
battery is not supported.
• This camera does not have a separate battery for the
clock. The date and time settings of the camera are
cleared whenever power is totally cut off (from both the
battery and USB cradle). Be sure to reconfigure these
settings after power is interrupted (page 169).
Download from Www.Somanuals.com. All Manuals Search And Download.
16
INTRODUCTION
I Lens
I Other
• Never apply too much force when cleaning the surface of
the lens. Doing so can scratch the lens surface and cause
malfunction.
• Fingerprints, dust, or any other soiling of the lens can
interfere with proper image recording. Never touch the
lens with your fingers. You can remove dust particles
from the lens surface by using a lens blower to blow them
off. Next, wipe the surface of the lens with a soft lens
cloth.
• The camera may become slightly warm during use. This
does not indicate malfunction.
• If the exterior of the camera needs cleaning, wipe it with a
soft, dry cloth.
• You may sometimes notice some distortion in certain
types of images, such as a slight bend in lines that should
be straight. This is due to the characteristics of lens, and
does not indicate malfunction of the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
QUICK START GUIDE
First, charge the battery!
1. Load the battery into the camera
(page 33).
2. Place the camera onto the USB cradle to charge the
battery (page 34).
• Note that the shape of the AC adaptor depends on the area where
you purchased the camera.
• It takes about 180 minutes to achieve a full charge.
1
1 Inlet Type
2
2
Stopper
[CHARGE] lamp
Charging: Lights red
1 Plug-in Type
Charging Complete: Lights green
3
Download from Www.Somanuals.com. All Manuals Search And Download.
18
QUICK START GUIDE
To configure display language and clock settings
• Be sure to configure the following settings
before using the camera to record images.
See page 49 for details.
1. Press the power button to turn on the camera.
2. Use [̆], [̄], [̇], and [̈] to select the language you
want.
1
3. Press [SET] to register the language setting.
4. Use [̆], [̄], [̇], and [̈] to select the geographical area
you want, and then press [SET].
5. Use [̆] and [̄] to select the city you want, and then
press [SET].
2, 3, 4, 5, 6, 7, 8, 9
6. Use [̆] and [̄] to select the summer time (DST) setting
you want, and then press [SET].
[̆]
[̇]
[̄]
[̈]
7. Use [̆] and [̄] to select the date format setting you
[SET]
want, and then press [SET].
8. Set the date and the time.
9. Press [SET] to register the clock settings and exit the
setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
QUICK START GUIDE
To record an image
See page 52 for details.
Snapshot mode icon
1. Press [ ] (REC).
10
• This enters the REC (recording) mode.
1600 1200N
Green operation lamp
1
2. Align the mode dial with “ ” (Snapshot mode).
3
05/12/24
:
12 58
3. Point the camera at the subject, use the monitor
screen or viewfinder to compose the image, and
then press the shutter button half way.
4
Focus frame
• When the camera finishes its Auto Focus operation, the
focus frame will turn green and the green operation lamp
lights.
4. Holding the camera still, gently press the shutter
button all the way down.
2
Before using a commercially available memory
card, be sure to first format it using the camera’s
formatting procedure. For details about formatting
a memory card, see page 179.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
QUICK START GUIDE
To view a recorded image
To delete an image
See page 130 for details.
See page 158 for details.
1
1
2
2, 3, 4, 5
1. Press [ ] (PLAY).
1. Press [ ] (PLAY).
2. Press [̄] ( ).
• This enters the PLAY (playback) mode.
2. Use [̇] and [̈] to scroll through the
3. Use [̇] and [̈] to display the image you want to
images.
delete.
4. Use [̆] and [̄] to select “Delete”.
• To exit the image delete operation without deleting anything,
select “Cancel”.
5. Press [SET] to delete the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
GETTING READY
This section contains information about things you need to
know about and do before trying to use the camera.
This term as used in this
manual:
Means this:
“a REC mode”
The currently selected
recording mode (Snapshot,
BEST SHOT, Movie, Short
Movie, Past Movie, MOVIE
BEST SHOT, Voice Recording)
About This Manual
This section contains information about the conventions
used in this manual.
“digital noise”
Tiny flecks or “snow” in a
recorded image or on the
monitor screen, which makes
the image look grainy.
I Terminology
The following table defines the terminology used in this
manual.
I Button Operations
Button operations are indicated by the button name inside
of brackets ([ ]).
This term as used in this
Means this:
manual:
“camera”
The CASIO EX-Z750 Digital
Camera
I On-screen Text
On-screen text is always enclosed by double quotation
marks (“ ”).
“file memory”
The location where the
camera is currently storing
images you record (page 54)
“battery”
“charger”
The NP-40 Rechargeable
Lithium Ion Battery
I Supplementary Information
The optionally available CASIO
BC-30L charger
•
IMPORTANT!
indicates very important
information you need to know in order to use the camera
correctly.
•
NOTE
indicates information that is useful when
operating the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
GETTING READY
I File Memory
General Guide
The term “file memory” in this manual is a general term that
refers to the location where your camera is currently storing
the images you record. File memory can be any one of the
following three locations.
The following illustrations show the names of each
component, button, and switch on the camera.
Camera
• The camera’s built-in flash memory
• An SD memory card loaded in the camera
• A MultiMediaCard loaded in the camera
I Front
1 Zoom controller
2 Shutter button
3 Power button
4 Microphone
5 Flash
1 2 34 56 7
For more information about how the camera stores images,
see page 209.
6 AF assist light/
self-timer lamp
7 Finder
8 Lens
8
Download from Www.Somanuals.com. All Manuals Search And Download.
23
GETTING READY
I Back
I Bottom
9 Finder
M Stopper
9 0 AB
C
0 Operation lamp
A [ ] (PLAY mode)
button
N Memory card slot
O Battery compartment
P Battery cover
B [ ] (REC mode)
button
C Mode dial
Q Connector
R Tripod screw hole
* Use this hole when attaching to a tripod.
D
E
D Strap ring
E [SET] button
F [̆][̄][̇][̈]
G [DISP] button
H [MENU] button
I Monitor Screen
M
I
H
G
F
I Side
J Speaker
R
Q
P
ON
K [
shutter) button
L [EX] button
] (Continuous
J
K
L
Download from Www.Somanuals.com. All Manuals Search And Download.
24
GETTING READY
I Back
USB Cradle
Simply placing your CASIO digital camera onto the USB
cradle lets you perform the following tasks.
6 [DC IN 5.3V]
(AC adaptor connector)
7 [ ] (USB port)
8 [AV OUT]
• Battery charging (page 34)
• Viewing of images using the Photo Stand slideshow
feature (page 149).
(AV output port)
6
7
• TV connectability for viewing of images on a television
screen (page 155).
• Direct connection to a printer for printing (page 189)
• Automatic transfer of images to a computer (page 194)
8
I Front
2
1
1 Camera connector
2 [USB] lamp
3
3 [USB] button
4 [CHARGE] lamp
5 [PHOTO] button
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
25
GETTING READY
Monitor Screen Contents
The monitor screen uses various indicators and icons to keep you informed of the camera’s status.
• Note that the example screens in this chapter are for illustrative purposes only. They do not exactly match the screen
contents actually produced on the camera.
REC Modes
I Screen Indicators
1 Flash mode indicator
3 White balance indicator 5 Self-timer (page 69)
None 1-Image
(page 64)
None Auto
(page 84)
None Auto
Self-timer 10 sec
10s
Flash Off
Daylight
Cloudy
Shade
2 3 45 6 7
8
Self-timer 2 sec
Triple self-timer
2
s
Flash On
1
E
Red-eye reduction
x3
9
0
•
If the camera detects that
flash is required while auto
flash is selected, the flash on
indicator will appear when the
shutter button is pressed half
way.
Fluorescent 1
1
2
6 REC modes (page 52)
Fluorescent 2
Tungsten
Manual
Snapshot
D
A
B
BEST SHOT
Manual Exposure
Movie
2 Focus mode indicator
4 Continuous shutter
modes (page 89)
Single Shot
(page 74)
None Auto Focus
MOVIE BEST SHOT
Short Movie
C
Macro
Past Movie
Pan Focus
Infinity
Normal Continuous
Shutter
Audio Snapshot
Voice Recording
Zoom Continuous
Z
Manual Focus
Shutter
•
appears only during
movie recording.
Multi Continuous
Shuttur
Download from Www.Somanuals.com. All Manuals Search And Download.
26
GETTING READY
7 Metering mode indicator
F
0 • Snapshots: Image size
(page 71)
(page 126)
×
3072 2304 pixels
Multi
×
3072 2048 (3:2) pixels
×
2560 1920 pixels
Center Weighted
Spot
×
2048 1536 pixels
×
G
H
I
J
1600 1200 pixels
×
640
480 pixels
8 • Snapshots: Memory capacity
(pages 56, 245)
• Movies: Recording time
(page 105)
(Remaining number of storable
images)
• Movies: Remaining
recording time (page 105)
A EV value (page 83)
B Date and time
(page 169)
K
9 Image quality
•
Snapshots (page 72)
F : Fine
C Battery capacity
F Digital zoom indicator (page 62)
G Exposure mode (pages 28, 56, 87)
H Shutter speed value (pages 28, 56, 87)
I Aperture value (pages 28, 56, 87)
J ISO sensitivity (page 125)
(page 39)
N : Normal
E : Economy
D Histogram (page 117)
•
Movies (page 104)
HQ
: High Quality
E Focus frame
NORMAL : Normal
LP
: Long Play
(page 55)
•
•
Focusing complete: Green
Focusing failed: Red
K Zoom indicator (page 62)
NOTE
•
•
Left side indicates optical zoom.
Right side indicates digital zoom.
• Changing the setting of any one of the following
functions will cause Icon Help (page 122) text to
appear on the monitor screen. You can turn off Icon
Help if you want.
— Flash mode, Focus mode, White balance, Self-
timer, Metering.
NOTE
• An out of range shutter speed, aperture, or ISO
sensitivity setting causes the corresponding monitor
screen value to turn amber.
— EX menu screen (page 129) image size, white
balance, AF area.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
GETTING READY
2 Aperture and Shutter speed values
(pages 56, 87)
I Exposure Panel
The exposure panel is an area in the lower right corner of
the REC modes monitor screen that shows various
adjustable parameters. You can also use the exposure
panel to adjust exposure settings.
Use this item to adjust the aperture
and shutter speed values.
• The aperture and shutter speed
values are displayed in the
exposure panel when the mode
dial is set to “M” (manual
exposure).
Aperture value
Shutter speed value
3 EV shift (exposure compensation value)
(page 83)
Exposure Panel
Use this item to adjust the exposure
compensation (EV shift) value.
• The EV shift value appears when the
mode dial is set to any setting other
than “M” (manual exposure) when
“EV Shift” is assigned as the
EV shift
• The following explains the items that appear on the
exposure panel. Note that the current REC mode
determines which items appear.
“L/R Key” function (page 120).
1 Exposure mode (pages 56, 87)
Use this item to select the exposure
mode.
4 Manual focus (MF) setting (page 80)
Use this item for adjust focus manually.
• The manual focus setting item is
displayed in the exposure panel when
manual focus is selected (indicated
• The exposure mode is displayed in the
exposure panel when the mode dial is
set to “M” (manual exposure).
Exposure mode
Manual focus
setting
by “
” on the monitor screen) using
[̆] (
).
Download from Www.Somanuals.com. All Manuals Search And Download.
28
GETTING READY
5 • Snapshots: Image Size
A White balance indicator
PLAY Mode
12
3
(page 71)
(page 84)
×
3072 2304 pixels
×
Auto
3072 2048 (3:2) pixels
AWB
×
2560 1920 pixels
Daylight
Cloudy
Shade
4
5
×
2048 1536 pixels
F
E
×
1600 1200 pixels
×
640
480 pixels
6
7
8
9
• Movies: Image quality
(page 104)
Fluorescent 1
1
2
HQ
NORMAL : Normal
LP : Long Play
: High Quality
Fluorescent 2
Tungsten
Manual
6 Shutter speed value
D
C
B A 0
(pages 56, 87)
B Flash mode indicator
(page 64)
7 Aperture value
(pages 56, 87)
Flash On
1 PLAY mode file type
Snapshot
3 Folder name/File name
Flash Off
8 ISO sensitivity (page 125)
(page 160)
Example : When a file named
CIMG0023.JPG is stored in a folder
named 100CASIO
Red-eye reduction
9 Date and time
Movie
(page 169)
C REC modes (page 52)
Snapshot
MOVIE BEST SHOT
Short Movie
0 Metering mode indicator
100-0023
BEST SHOT
(page 126)
Past Movie
Folder name File name
Manual Exposure
Audio Snapshot
Voice Recording
4 • Snapshots: Image quality
(page 72)
D Battery capacity
(page 39)
F : Fine
N : Normal
E : Economy
2 Image protection
indicator (page 161)
E Histogram (page 117)
F EV value (page 83)
• Movies: Recording time (page 105)
Download from Www.Somanuals.com. All Manuals Search And Download.
29
GETTING READY
IMPORTANT!
Changing the Contents of the Monitor
Screen
Each press of the [DISP] button changes the contents of
the monitor screen as shown below.
• Some information may not display properly if you
display an image that was recorded using a different
digital camera model.
I REC Modes
Indicators on
Histogram on
Monitor screen off
Indicators off
Download from Www.Somanuals.com. All Manuals Search And Download.
30
GETTING READY
IMPORTANT!
I PLAY Mode
• You cannot turn off the monitor screen in the
following modes: PLAY, BEST SHOT, Movie, Short
Movie, Past Movie, MOVIE BEST SHOT Mode
(standby).
• Pressing [DISP] will not change monitor screen
contents during movie recording, or during standby
or recording of an audio snapshot.
• Pressing [DISP] in the Voice Recording REC mode
toggles the monitor screen on (“indicators on”) and
off. While a Voice Recording file is displayed in the
PLAY mode, pressing [DISP] toggles between
“indicators on” and “indicators off”.
Indicators on
Histogram/Details on
• When playing back the content of a Voice Recording
file while “indicators off” is selected (Voice Recording
file icon only on the monitor screen), the monitor
screen will go black about two seconds after you
press [SET] to start playback. The Voice Recording
file icon (indicators off) will reappear after playback is
complete.
Indicators off
Download from Www.Somanuals.com. All Manuals Search And Download.
31
GETTING READY
IMPORTANT!
Attaching the Strap
• Be sure to keep the strap around your wrist when
using the camera to protect against accidentally
dropping it.
Attach the strap to the strap ring as shown in the
illustration.
• The supplied strap is intended for use with this
camera only. Do not use it for any other purpose.
• Never swing the camera around by the strap.
Strap ring
Download from Www.Somanuals.com. All Manuals Search And Download.
32
GETTING READY
2. While pulling the stopper in the direction
indicated by the arrow in the illustration, align
the arrow mark on the battery with the arrow
mark on the camera and slide the battery into
the camera.
Power Requirements
Your camera is powered by a rechargeable lithium ion
battery (NP-40).
Loading the Rechargeable Battery
Arrow marks
1. Slide the battery cover in the direction
indicated by the arrow, and then swing it
open.
NP-40
Stopper
• Push the bottom of the battery, and make sure that
the stopper securely locks the battery in place.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
GETTING READY
3. Swing the battery cover closed, and then slide
it in the direction indicated by the arrow.
To charge the battery
1. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• Note the shape of the AC adaptor depends on the
area where you purchased the camera.
USB Cradle
[DC IN 5.3V]
IMPORTANT!
• Use only the special NP-40 rechargeable lithium ion
battery to power this camera. Use of any other type
of battery is not supported.
AC Adaptor
The battery is not fully charged when you use the
camera for the first time after purchasing it. You need
to charge the battery before using the camera for the
first time.
AC power cord
Download from Www.Somanuals.com. All Manuals Search And Download.
34
GETTING READY
NOTE
NOTE
• The bundled AC adaptor is designed for operation
with any power supply in the range of 100V to 240V
AC. Note, however, that the shape of the AC power
cord plug varies according to country or geographic
area. If you plan to use the AC adaptor in a
geographic area where the power receptacle shape
is different from that in your area, replace the AC
power cord with one of the other ones that comes
with the camera, or purchase a commercially
available AC power cord that is compatible with the
power outlets in that area.
• The AC adaptor is designed for operation on power
ranging from 100V AC to 240V AC. Note, however,
that the shape of the power cord plug varies
according to country or geographic area. It is up to
you to find out if the shape of the AC adaptor power
cord plug is compatible with local power outlets when
traveling abroad.
• Never use the AC adaptor with a voltage converter.
2. Turn off the camera.
• Never use the AC adaptor with a voltage converter.
3. Set the camera onto
the USB cradle.
• Do not place the camera
onto the USB cradle
while it is turned on.
USB Cradle
• The [CHARGE] lamp
on the USB cradle
should turn red,
AC Adaptor
indicating that charging
has started. When
charging is complete,
[DC IN 5.3V]
[CHARGE] lamp
the [CHARGE] lamp
will turn green.
• It takes about 180 minutes to achieve a full charge.
Actual charging time depends on current battery
capacity and charging conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
GETTING READY
• If the [CHARGE] lamp starts flashing red, it means
that an error occurs while charging. An error can be
caused by any of the following: a problem with the
USB cradle, a problem with the camera, or a problem
with the battery or how it is loaded. Remove the
camera from the USB cradle and see if it works
normally.
• The only operations that can be performed while the
camera is on the USB cradle are: battery charging,
Photo Stand, image output to a TV, and USB data
communication.
4. After charging is complete, remove the
camera from the USB cradle.
IMPORTANT!
• Use only the USB cradle (CA-26) that comes with the
camera or the optionally available charger (BC-30L)
to charge the special NP-40 rechargeable lithium ion
battery. Never use any other charging device.
• Use only the bundled AC adaptor. Never use any
other type of AC adaptor. Do not use optionally
available AD-C40, AD-C620 and AD-C630 AC
adaptors with this camera.
• Make sure that the camera connector of the USB
cradle is securely inserted into the camera’s
connector as far as it will go.
• The [CHARGE] lamp may remain amber colored and
the charge operation may not start right away if you
try to charge immediately after using the camera
(which causes battery to become warm) or when it is
too hot or too cold where you are performing the
charge operation. If this happens, simply wait until
the battery reaches normal temperature. The
[CHARGE] lamp will turn red and charging will start
when the battery temperature returns to the
allowable charging temperature range.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
GETTING READY
IIf the camera does not work normally
I Battery Life Guidelines
This can mean there is a problem with how the battery is
loaded. Perform the following steps.
The battery life guideline values given below indicate the
amount of time under the conditions defined below the
table, until power automatically turns off due to battery
failure. They do not guarantee that the battery will provide
the amount of service indicated. Low temperatures and
continued use reduce battery life.
1. Remove the battery from the camera and
check the battery contacts for dirt. If the
contacts are dirty, wipe them clean with a dry
cloth.
Operation
Apporoximate Battery Life
325 shots (160 minutes)
Number of Shots (CIPA
Standard)*1 (Operating Time)
2. Check to make sure that the AC adaptor’s
power cord is connected securely to the
power outlet and USB cradle.
Number of Shots, Continuous
740 shots (190 minutes)
410 minutes
Recording*2 (Operating Time)
• If the same symptoms occur again when you place
the camera on the USB cradle after taking the above
steps, contact a CASIO authorized service center.
Continuous Snapshot Playback*3
Continuous Movie Recording*4
Continuous Voice Recording*5
170 minutes
410 minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
37
GETTING READY
Supported Battery: NP-40 (Rated Capacitance: 1230mAh)
Storage Medium: SD Memory Card
• The above values are based on a new battery starting
from a full charge. Repeated charging shortens battery
life.
• Battery life is greatly affected by how much you use flash,
zoom and auto focus, and how long you leave power
turned on. Recording time and the number of images you
can record are also affected by the monitor screen
brightness setting (Normal or Bright) (page 166).
*1 Number of Shots (CIPA Standard)
• Temperature: 23°C (73°F)
• Monitor Screen: On
• Zoom operation between full wide to full telephoto
every 30 seconds, during which two images are
recorded, one image with flash; power turned off and
back on every time 10 images are recorded.
ITips to Make the Battery Last Longer
*2 Continuous Recording Conditions
• Temperature: 23°C (73°F)
• Monitor screen: On
• If you do not need the flash while recording, select
(flash off) for the flash mode. See page 64 for more
information.
• Flash: Off
• Enable the Auto Power Off and the Sleep features (page
45) to protect against wasting battery power when you
forget to turn off the camera.
• You can also conserve battery power by using [DISP] to
turn off the monitor screen.
• Using Manual Focus (page 80) or Pan Focus (page 79)
during movie recording extends battery life.
• The “Normal” monitor brightness setting allows battery
power to last longer than the “Bright” setting (page 166).
• Image recorded every 15 seconds, alternating full
wide-angle and full telephoto zoom
*3 Continuous Snapshot Playback Conditions
• Temperature: 23°C (73°F)
• Scroll one image about every 10 seconds
*4 Approximate time for continuous movie recording,
without using zoom.
*5 Voice recording times are based on continuous
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
GETTING READY
I Low Battery Indicator
To replace the battery
The following shows how the battery capacity indicator on
the monitor screen changes as battery power is used. The
indicator means that remaining battery power is low.
Note that you will not be able to record images while the
1. Open the battery cover.
2. Pull the stopper in the direction indicated by
the arrow.
battery indicator is
. Charge the battery immediately
whenever either of these indicators appears.
• This will cause the battery to come part way out of
the slot.
Battery Level
Indicator
High
Low
Stopper
3. Release the stopper and pull the battery from
the camera.
• Take care so you do not drop the battery.
4. Load a new battery into the camera (page 33).
Download from Www.Somanuals.com. All Manuals Search And Download.
39
GETTING READY
• Failure to observe any of the following precautions
while using the battery creates the risk of overheating,
fire, and explosion.
— Never use any other type of charger except the
optional charger specified for the battery.
— Never try to use the battery to power any device
other than this camera.
— Never use or leave the battery near open flame.
— Never place the battery in a microwave oven, throw
it into fire, or otherwise expose it to intense heat.
— Make sure the battery is oriented correctly when you
load it into the camera or attach it to the optional
charger.
— Never carry or store the battery together with items
that can conduct electricity (necklaces, pencil lead,
etc.)
Power Supply Precautions
Note the following precautions when handling or using the
battery and the optional charger.
I Battery Handling Precautions
G SAFETY PRECAUTIONS
Be sure to read the following Safety Precautions before
using the battery for the first time.
NOTE
• The term “battery” in this manual refers to the CASIO
NP-40 Rechargeable Lithium Ion Battery.
• Use only the USB cradle (CA-26) that comes with the
camera or the optionally available charger (BC-30L)
to charge the special NP-40 rechargeable lithium ion
battery. Never use any other charging device.
— Never try to take the battery apart, modify it in any
way, or expose it to strong impact.
— Do not immerse the battery in fresh water or salt
water.
— Do not use or leave the battery under direct
sunlight, in an automobile parked in the sun, or in
any other area subject to high temperatures.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
GETTING READY
• Should you ever notice any of the following conditions
while using, charging, or storing a battery, immediately
remove it from the camera or charger, and keep it away
from open flame:
— Fluid leaking
— Emission of a strange odor
— Heat emission
— Battery discoloration
— Battery deformation
— Any other battery abnormality
• If the battery does not achieve full charge after the
normal charging time has passed, stop charging.
Continued charging creates the risk of overheating, fire,
and explosion.
• Battery fluid can damage your eyes. Should battery
fluid get into your eyes accidentally, immediately rinse
them with clean tap water and then consult a physician.
• Be sure to read page 34 of this User’s Guide and the
instructions that come with the optional charger before
using or charging the battery.
G PRECAUTIONS DURING USE
• The battery is designed for use with this CASIO digital
camera only.
• Use only the USB cradle that comes with the camera or
the specified optional charger to charge the battery.
Never use any other type of charger for charging.
• Use of a battery in cold environments shortens the
operating time you can expect on a full charge. Charge
the battery in a location where the temperature is in the
range of 10°C to 35°C (50°F to 95°F). Charging
outside this temperature range can cause charging to
take longer than normal or even cause charging to fail.
• Very limited operation following a full charge indicates
that the battery has reached the end of its service life.
Replace the battery with a new one.
• Never wipe the battery with thinner, benzene, alcohol,
or other volatile agents or chemically treated rags.
Doing so can cause deformation of the battery and lead
to malfunction.
• If the battery is to be used by young children, make
sure that a responsible adult makes them aware of the
precautions and proper handling instructions and make
sure that they handle the battery correctly.
• Should fluid from the battery accidentally get onto
clothing or your skin, immediately rinse it off with clean
tap water. Prolonged contact with battery fluid can
cause skin irritation.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
GETTING READY
G BATTERY STORAGE PRECAUTIONS
I USB Cradle and AC Adaptor Precautions
• Make sure you remove the battery from the camera
when you do not plan to use it for a long time. A battery
left in the camera discharges very small amounts of
power even when power is turned off, which can lead to
a dead battery or the need for longer charging before
the next use.
• Never use an electrical outlet whose voltage
is outside the rating marked on the AC
adaptor. Doing so can create the risk of fire or
electric shock. Use only the AC adaptor
bundled with this camera.
• Do not allow the AC adaptor cord to become
cut or damaged, do not place heavy objects
on it, and keep it away from heat. A damaged
power cord creates the risk of fire and electric
shock.
• Store the battery in a cool, dry place (20°C (68 °F) or
lower).
G USING THE BATTERY
• Never try to modify the AC adaptor cord, or
subject it to severe bending, twisting, or
pulling. Doing so creates the risk of fire and
• See page 34 of this manual or the instructions that
come with the optional charger for information about
charging procedures and charging times.
• When transporting a battery, keep it either loaded in
the camera or stored in its case.
Caution!
electric shock.
• Never touch the AC adaptor while your hands
are wet. Doing so creates the risk of electric
shock.
• Do not overload extension cords or wall
outlets. Doing so creates the risk of fire and
electric shock.
• Should the cord of the AC adaptor become
damaged (exposed internal wiring), contact
your dealer or nearest CASIO authorized
service center. A damaged AC adaptor cord
creates the risk of fire or electric shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
GETTING READY
• Use the AC adaptor where it will not be
Turning the Camera On and Off
splashed with water. Water creates the risk of
fire and electric shock.
I To turn on the camera
• Do not place a vase or any other container
filled with liquid on top of the AC adaptor.
Water creates the risk of fire and electric
shock.
Press the power button, [
] (REC) or [
] (PLAY). The
Caution!
green operation lamp will light momentarily, and then
power will turn on. The mode the camera enters depends
on which button you pressed to turn it on.
• Make sure you always remove the camera from the USB
cradle before connecting or disconnecting the AC
adaptor.
To enter this mode at
Press this button to turn on the camera:
startup:
• Charging, USB data communication, and using the Photo
Stand feature can cause the AC adaptor to become
warm. This is normal and does not indicate malfunction.
• Unplug the AC power cord from the power outlet
whenever you are not using it.
REC
Power button or [
[ ] (PLAY)
] (REC)
PLAY
Power button
Green operation lamp
• Never place a blanket or any other cover on the AC
adaptor. Doing so creates the risk of fire.
[
] (PLAY)
] (REC)
[
Download from Www.Somanuals.com. All Manuals Search And Download.
43
GETTING READY
NOTE
I To turn off the camera
• Pressing [
the REC mode, while pressing [
] (REC) to turn on the camera enters
] (PLAY) enters
Press the power button to turn off the camera.
the PLAY mode.
NOTE
• Pressing [
] (PLAY) while in a REC mode
• You can setup the camera so it does not turn on
switches to the PLAY mode. The lens retracts about
10 seconds after switching modes.
when you press [
turn off when you press [
For details, see “Configuring [
] (REC) or [
] (PLAY), or to
] (REC) or [ ] (PLAY).
] (REC) and [
]
IMPORTANT!
(PLAY) Power On/Off Functions” on page 174.
• If camera power is turned off by the Auto Power Off
feature, press the power button, [
(PLAY) to turn it back on again.
• Pressing the power button or [
] (REC) or [
]
] (REC) to turn on
the camera also causes the lens to extend. Take
care to avoid any interference with the lens operation
or allowing anything to strike the lens when it is
extended.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
GETTING READY
G See “Using the On-screen Menus” (page 46) for
information about how to use menus.
Configuring Power Saving Settings
You can configure the settings described below to
conserve battery power.
To configure this feature:
Sleep
Select this setting:
Sleep
Sleep
: Automatically turns off the monitor screen
if no operation is performed for a specified
amount of time in a REC mode.
Auto Power Off
Auto Power Off
Performing any button operation causes
the monitor screen to turn back on.
Auto Power Off: Turns off power if you do not perform any
operation for a specified amount of time.
5. Use [̆] and [̄] to change the currently
selected setting, and then press [SET].
• Available Sleep settings are: “30 sec”, “1 min”, “2 min”,
and “Off”.
• Available Auto Power Off settings are: “2 min” and
“5 min”.
1. Turn on the camera.
• Note that the Sleep feature does not operate in the
PLAY mode.
2. Press [MENU].
3. Use [̇] and [̈] to select the “Set Up” tab.
• Pressing any button while the camera is in the Sleep
state immediately turns the monitor screen back on.
4. Use [̆] and [̄] to select the feature whose
setting you want to configure, and then press
[̈].
Download from Www.Somanuals.com. All Manuals Search And Download.
45
GETTING READY
• The Auto Power Off and Sleep features are disabled
in the following cases.
Using the On-screen Menus
Pressing [MENU] displays menus on the monitor screen
that you can use to perform various operations. The menu
that appears depends on whether you are in a REC mode
or the PLAY mode. The following shows an example menu
procedure in a REC mode.
— When the camera is connected to a computer or
some other device through the USB cradle
— While a slideshow is in progress
— While playing back a voice recording file
— While a movie is being recorded
— While playing back a movie
Power button
1. Press the power
button or [ ] (REC).
— During Short Movie standby
• If you want to enter the
— During Past Movie standby
PLAY mode instead,
press [
] (PLAY).
[
][
]
Download from Www.Somanuals.com. All Manuals Search And Download.
46
GETTING READY
Selection cursor (indicates
the currently selected item)
G Menu Screen Operations
2. Press [MENU].
When you want to do this:
Move between tabs
Do this:
[MENU]
Tab
Press [̇] and [̈].
Move from the tab to the
settings
Press [̄].
[̆]
[̇]
[̄]
Move from the settings to
the tab
[̈]
Press [̆].
Move between the settings
Press [̆] and [̄].
Display the options
available for a setting
Press [̈] or press [SET].
Press [̆] and [̄].
Settings
Select an option
[SET]
Apply the setting and exit
the menu screen
Press [SET].
Apply the setting and
return to tab selection
Press [̇].
Exit the menu screen
Press [MENU].
Download from Www.Somanuals.com. All Manuals Search And Download.
47
GETTING READY
3. Press [̇] or [̈] to select the tab you want,
and then press [SET] to move the selection
cursor from the tab to the settings.
6. Perform one of the following operations to
apply the setting you configured.
To do this:
Perform this key operation:
Press [SET].
Apply the setting and exit
the menu screen.
4. Use [̆] and [̄] to
select the feature
whose setting you
want to configure,
and then press [̈].
Apply the setting and
return to feature selection
in step 4.
Press [̇].
Apply the setting and
return to tab selection in
step 3.
1. Press [̇].
2. Use [̆] to move back up to
tab selection.
• Instead of pressing [̈],
you could also press
Example: To select the
[SET].
“Self-timer”
• See “Menu Reference” on page 231 for more
information about menus.
item.
5. Use [̆] and [̄] to change the currently
selected setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
GETTING READY
• A built-in backup battery retains the date and time
settings of the camera for about 27 hours if the
camera is not supplied with power. Date and time
settings will be cleared when the backup battery
goes dead. The following are the conditions when
power is not being supplied to the camera.
— When the rechargeable battery is dead or
removed from the camera
— When power is not being supplied to the camera
from the USB cradle while the rechargeable
battery is dead or removed from the camera
• The date and time setting screen will appear on the
monitor screen the next time you turn on the camera
after the date and time settings have been cleared.
If this happens, reconfigure the date and time
settings.
Configuring Display Language and Clock
Settings
Be sure to configure the following settings before using the
camera to record images.
• Display language
• Home city
• Date Style
• Date and time
Note that the current date and time settings are used by
the camera to generate the date and time that are stored
along with image data, etc.
IMPORTANT!
• If you make a mistake when setting the language or
clock with the following procedure, you will need to
use the camera’s menu to individually change the
language (page 173) or clock (page 169) settings.
• You will not be able to edit time data stored with
images that are recorded while the camera’s time
setting is wrong.
• Recording images without configuring the clock
settings causes incorrect time information to be
registered. Be sure to configure the clock settings
before using the camera.
• Even if you configure date and time settings, the
date and time are not stamped into the images
themselves. Note, however, that you can specify
inclusion of the date inside of an image when printing
(page 191).
Download from Www.Somanuals.com. All Manuals Search And Download.
49
GETTING READY
3. Use [̆], [̄], [̇], and
[̈] to select the
To configure display language and clock
settings
geographical area
where you live, and
then press [SET].
1. Press the power button, [ ] (REC) or
[
] (PLAY) to turn on the camera.
2. Use [̆], [̄], [̇], and
[̈] to select the
4. Use [̆] and [̄] to
select the name of the
city where you live,
and then press [SET].
language you want,
and then press [SET].
: Japanese
English
: English
Français : French
Deutsch : German
Español : Spanish
5. Use [̆] and [̄] to select the summer time
(DST) setting you want, and then press [SET].
Italiano
Português : Portuguese
: Chinese (Complex)
: Italian
When you want to do this:
Select this setting:
Keep time using summer time
(Daylight Saving Time)
On
Off
: Chinese (Simplified)
: Korean
Keep time using standard time
Download from Www.Somanuals.com. All Manuals Search And Download.
50
GETTING READY
6. Use [̆] and [̄] to
select the date format
setting you want, and
then press [SET].
7. Set the current date
and the time.
Example: December 24, 2005
To do this:
Do this:
Change the setting at the current
cursor location
To display the date like this:
05/12/24
Select this format:
Press [̆] and [̄].
Press [̇] and [̈].
YY/MM/DD
DD/MM/YY
MM/DD/YY
Move the cursor between settings
24/12/05
Toggle between 12-hour and 24-
hour timekeeping
Press [DISP].
12/24/05
8. Press [SET] to register the settings and exit
the setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
BASIC IMAGE RECORDING
This section describes the basic procedure for recording an
image.
•
•
(Snapshot mode)
Use this mode to record still images. This is the mode you
should normally use for image recording.
(BEST SHOT mode)
Recording an Image
This mode makes camera setup as easy as selecting the
applicable sample scene. Select one of the BEST SHOT
scenes and the camera automatically configures itself
with the setup for that scene (page 93).
Specifying the Recording Mode
Your CASIO digital camera has eight recording modes,
each of which is described below. Before recording an
image, use the mode dial to select the recording mode that
suits the type of image you are trying to record.
•
(Manual Exposure mode)
This mode gives you total control over aperture and
shutter speed settings (page 87).
•
•
(Voice Recording mode)
Use this mode to record audio only (page 115).
Snapshot mode
BEST SHOT mode
Manual Exposure mode
Voice Recording mode
Past Movie mode
(Past Movie mode)
Pressing the shutter button starts recording from five
seconds prior to the point the button is pressed. Use this
mode when you want to make sure you do not miss fast-
moving action (page 108).
Short Movie mode
Mode dial
MOVIE BEST SHOT mode
•
(Short Movie mode)
Movie mode
Each press of the shutter button in this mode records a
short movie that starts before the button is pressed and
ends after the button is pressed (page 106).
Download from Www.Somanuals.com. All Manuals Search And Download.
52
BASIC IMAGE RECORDING
•
•
(MOVIE BEST SHOT mode)
Aiming the Camera
Use both hands to hold the camera still when shooting an
image. Holding the camera with one hand increases the
chance of movement, which can blur your images.
This mode makes camera setup as easy as selecting the
applicable sample scene. Select one of the MOVIE BEST
SHOT scenes and the camera automatically configures
itself with the setup for that scene (page 110).
(Movie mode)
Use this mode for general movie recording (page 105).
• Horizontal
Hold the camera
still in both
hands, with your
arms firmly
NOTE
against your
sides.
Snapshot mode icon
• The icon of the currently
selected recording mode
10
(like
for the Snapshot
1600 1200N
mode) is displayed on the
monitor screen.
• Vertical
When holding
the camera
vertically, make
sure that the
flash is above
the lens. Hold
the camera still
with both hands.
05/12/24
:
12 58
Download from Www.Somanuals.com. All Manuals Search And Download.
53
BASIC IMAGE RECORDING
IMPORTANT!
Recording an Image
• Make sure your fingers and the strap do not block
the flash, microphone, AF assist light/self-timer lamp
or lens.
Your camera automatically adjusts shutter speed in
accordance with the brightness of the subject. Images you
record are stored in the camera’s built-in memory, or to a
memory card if you have one loaded in the camera.
• When an optionally available SD memory card or
MultiMediaCard (MMC) is loaded in the camera, images
are stored on the card (page 177).
Flash Microphone
AF assist light/
self-timer lamp
Lens
After purchasing a memory card, be sure to load it into
the camera and format it before trying to use it (page
175).
1. Press the power button or [ ] (REC) to turn
on the camera.
NOTE
• Moving the camera as you press the shutter button
or while the Auto Focus operation is being performed
(when you press the shutter button half way) can
cause blurring of the image. Press the shutter button
carefully, taking care to avoid camera movement.
This is especially important when available lighting is
low, which slows down the shutter speed.
Power button
[
]
Download from Www.Somanuals.com. All Manuals Search And Download.
54
BASIC IMAGE RECORDING
• This causes an image or a message to appear on
the monitor screen, and then enters the currently
selected recording mode.
• You can compose images using either the monitor
screen or the optical viewfinder (page 60).
• When using the optical viewfinder to compose
images, you can use [DISP] to turn off the monitor
screen and conserve battery power.
• If the camera is in the PLAY mode when it turns on,
the message “There are no files.” will appear if you
do not have any images stored in memory yet. In
4. Press the shutter button half
way to focus the image.
addition, the
display. If this happens, press [
the currently selected recording mode.
icon will be visible at the top of the
] (REC) to enter
• When you press the shutter
button half way, the camera’s
Auto Focus feature automatically
focuses the image, and displays
the shutter speed and aperture
values.
Snapshot mode icon
2. Align the mode dial
with “ ” (Snapshot
mode) (page 52).
10
Shutter button
1600 1200N
• The
(Snapshot
mode) icon is displayed
on the monitor screen
while the Snapshot
mode is selected.
Green operation lamp
• You can tell whether the
image is focused by
observing the focus frame
and the green operation
lamp.
05/12/24
:
12 58
Focus frame
3. Compose the image on the monitor screen so
the main subject is within the focus frame.
• The focusing range of the camera depends on focus
mode you are using (page 74).
Download from Www.Somanuals.com. All Manuals Search And Download.
55
BASIC IMAGE RECORDING
G Operation Lamp and Focus Frame Operation
*1 The amount of time the shutter remains open, allowing
light passing through the lens to reach the CCD. A
larger shutter speed value indicates that the shutter
remains open longer, which means more light reaches
the CCD.
*2 The size of the opening (aperture) that allows light
passing through the lens to reach the CCD. A larger
aperture value indicates a smaller opening for light to
pass through.
When you see this:
It means this:
Green focus frame
Green operation lamp
The image is in focus.
Red focus frame
Flashing green operation lamp
The image is not in focus.
• The monitor screen uses various indicators and
icons to keep you informed of the camera’s status.
5. After making sure that the
image is focused properly,
press the shutter button the
rest of the way down to
record.
Continuous shutter mode
Self-timer
White balance
Focus mode
Recording Mode
Metering mode indicator
Memory capacity
Flash
mode
Shutter button
• The number of images you can
record depends on the image
size and the image quality setting
you are using
Image quality
Image size
EV shift
(pages 71, 72, 245).
Date and time
Exposure mode
Shutter speed value*1
Aperture value*2
ISO sensitivity
Manual focus setting
Download from Www.Somanuals.com. All Manuals Search And Download.
56
BASIC IMAGE RECORDING
IMPORTANT!
You can turn the AF assist light on or off. It is
recommended that you turn off the AF assist light when
recording images of nearby people, etc.
• When the “REC” tab’s “Quick Shutter” setting is
turned on (page 76), the camera immediately records
the image without waiting for Auto Focus to be
performed when you press the shutter release all the
way down without pausing. This helps to ensure that
you are able to capture exactly the moment you
want.
1. In a REC mode, press [MENU].
2. Use [̇] and [̈] to select the “REC” tab.
3. Use [̆] and [̄] to select “AF Assist Light”,
and then press [̈].
I About AF Assist Light
The AF assist light/self-timer lamp operates automatically
to assist the Auto Focus operation whenever you are
shooting where lighting is dim.
4. Use [̆] and [̄] to select the setting you
want, and then press [SET].
To do this:
Select this setting:
AF assist light/self-timer lamp
Turn on the AF assist light
Turn off the AF assist light
On
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
57
B
BASIC IMAGE RECORDING
IMPORTANT!
I Recording Precautions
• Do not look directly at the AF assist light/self-timer
lamp or point it directly at the subject’s eyes.
• Never open the battery cover or place the camera onto
the USB cradle while the green operation lamp is
flashing. Doing so not only causes the current image to
be lost, it can also corrupt images already stored in file
memory and even lead to malfunction of the camera.
• Never remove the memory card while an image is being
recorded to the memory card.
• Fluorescent lighting actually flickers at a frequency that
cannot be detected by the human eye. When using the
camera indoors under such lighting, you may experience
some brightness or color problems with recorded images.
• When “Auto” is selected for the ISO sensitivity setting
(page 125), the camera automatically adjusts its
sensitivity in accordance with the brightness of the
subject. This can cause some digital noise (graininess) to
appear in images of relatively dark subjects.
• When recording a dimly lit subject while “Auto” is selected
for the ISO sensitivity setting (page 125), the camera
increases sensitivity and uses a faster shutter speed.
Because of this, you need to guard against camera
movement if you have flash turned off
(page 64).
• Bright light shining on the lens can cause images to
appear “washed out”. This tends to happen when
recording images outdoors in bright sunlight. To protect
against this, use your free hand to shade the lens from
the light.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
B
BASIC IMAGE RECORDING
I About Auto Focus
I About the REC Modes Monitor Screen
• Proper focus may be difficult or even impossible when
shooting the following types of subjects.
— Solid color walls or subjects with little contrast
— Strongly backlit subjects
• The image shown on the monitor screen in a REC mode
is a simplified image for composing purposes. The actual
image is recorded in accordance with the image quality
setting currently selected on your camera. The image
saved in file memory has much better resolution and
detail than the REC modes monitor screen image.
• Certain levels of subject brightness can cause the
response of the REC modes monitor screen to slow
down, which causes some digital noise (graininess) in the
monitor screen image.
— Very shiny objects
— Venetian blinds or other horizontally repeating patterns
— Multiple subjects that are varying distances from the
camera
— Subjects in poorly lit areas
— Moving subjects
— Subjects outside the shooting range of the camera
• Note that a green operation lamp and focus frame do not
necessarily guarantee that the resulting image will be in
focus.
• If Auto Focus does not produce the results you want for
some reason, try using focus lock (page 82) or manual
focus (page 80).
• Very bright light inside of an image can cause a vertical
band to appear in the monitor screen image. This is a
CCD phenomenon known as “vertical smear”, and does
not indicate malfunction of the camera. Note that vertical
smear is not recorded with the image in the case of a
snapshot, but it is recorded in the case of a movie (page
103).
Download from Www.Somanuals.com. All Manuals Search And Download.
59
BASIC IMAGE RECORDING
• Since the monitor screen shows exactly what will be
recorded, always use it for composing images in the
Macro and Manual Focus modes.
Using the Optical Viewfinder
You can conserve battery power by turning off the
camera’s monitor screen (page 30) and using the optical
viewfinder to compose images. The optical viewfinder also
comes in handy when shooting in areas where the monitor
screen is difficult to view because available lighting is dim,
etc.
IMPORTANT!
• The visible area framed by the viewfinder shows the
image that would be recorded at a distance of about
one meter (3.3˝). When recording a subject that is
closer to you than one meter, the recorded image will
be lower than what you can see inside the viewfinder
area.
Optical viewfinder
Area recorded at
Area visible in
distances less than the viewfinder
one meter (3.3˝)
Download from Www.Somanuals.com. All Manuals Search And Download.
60
BASIC IMAGE RECORDING
Using Zoom
Your camera is equipped with two types of zoom: optical
zoom and digital zoom. Normally, the camera automatically
switches over to digital zoom after you reach the maximum
limit for optical zoom. You can, however, configure the
camera to disable digital zoom, if you want.
Zoom out
Zoom in
Optical Zoom
The optical zoom range is 1X to 3X.
2. Compose the image, and then press the
shutter button.
Zoom controller
NOTE
1. In a REC mode, move the
zoom controller left or
right to zoom.
• The optical zoom factor also affects the lens
aperture.
• Use of a tripod is recommended to protect against
hand movement when using the telephoto setting
(zoom in).
• Whenever you perform an optical zoom operation
while recording with the Macro mode or manual
focus, a value will appear on the monitor screen to
tell you the focusing range (pages 78, 80).
• Optical zoom is disabled during movie recording.
Digital zoom only is available. Make sure you select
the optical zoom setting you want to use before you
press the shutter button to start movie recording
(page 103).
• Moving the zoom
controller as far as it
goes in either direction
will zoom at high speed.
To do this:
Zoom out
Zoom in
Move the zoom controller in this direction:
(Wide Angle)
(Telephoto)
Download from Www.Somanuals.com. All Manuals Search And Download.
61
B
BASIC IMAGE RECORDING
I To record an image using digital zoom
Digital Zoom
Digital zoom digitally enlarges the part of the image at the
center of the image screen. The range of digital zoom is 3X
to 24X (in combination with optical zoom).
Digital zoom indicator
1. In a REC mode, hold
the zoom controller
towards
side.
(telephoto)
/
IMPORTANT!
• This causes the zoom
indicator to appear on the
display.
• When you perform a digital zoom operation, the
camera manipulates the image data to enlarge the
center of the image. Unlike optical zoom, an image
enlarged with digital zoom appears coarser than the
original.
Zoom indicator
2. When the zoom pointer reaches the optical/
digital zoom switch over point, it will stop.
Digital
Zoom range
Optical Zoom range
1X
3X
24X
Zoom pointer
Optical/digital zoom switch over point
• The above shows what the zoom indicator looks like
when digital zoom is turned on (page 63). The digital
zoom range is not displayed when digital zoom is
turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
B
BASIC IMAGE RECORDING
3. Release the zoom controller momentarily, and
I To turn digital zoom on and off
then slide it towards
(telephoto) /
side
again to move the zoom pointer into the
digital zoom range.
1. In a REC mode, press [MENU].
2. Use [̇] and [̈] to select the “REC” tab.
• The zoom pointer will also stop when you move the
pointer back to the switch over point to re-enter the
optical zoom range. Release the zoom controller and
3. Use [̆] and [̄] to select “Digital Zoom”, and
then press [̈].
then slide it towards
(wide angle) /
side again
to move into the optical zoom range.
4. Use [̆] and [̄] to select the setting you
want, and then press [SET].
4. Compose the image, and then press the
shutter button.
To do this:
Select this setting:
Turn on digital zoom
Turn off digital zoom
On
Off
• Only the optical zoom range is displayed in the zoom
indicator when digital zoom is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
BASIC IMAGE RECORDING
To do this:
Select this setting:
None
Using the Flash
Have the flash fire automatically when
required (Auto Flash)*
Perform the following steps to select the flash mode you
want to use.
• The approximate effective range of the flash is shown
below.
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye reduction)
In this case, the flash fires automatically
when required
Wide Angle Optical Zoom:
Approximately 0.4 to 2.9 meters
(1.3´ to 9.5´) (ISO Sensitivity: Auto)
Telephoto Optical Zoom:
Approximately 0.4 to 1.6 meters
(1.3´ to 5.2´) (ISO Sensitivity: Auto)
* Depends on zoom factor.
* When using Icon Help (page 122), select “
Auto
Flash”.
1. In a REC mode, press [̄] (
).
2. Press the shutter button to record the image.
• Each press of [̄] (
) cycles through the flash
mode settings described below on the monitor
screen.
Flash mode indicator
[̄] (
)
Download from Www.Somanuals.com. All Manuals Search And Download.
64
BASIC IMAGE RECORDING
IMPORTANT!
I Flash On
• The flash unit of this camera fires a number of times
when you record an image. The initial flashes are
pre-flashes, which the camera uses to obtain
information that it uses for exposure settings. The
final flash is for recording. Make sure that you keep
the camera still until the shutter releases.
Select
(Flash On) as the flash mode when backlighting
causes your subject to appear dark, even though there is
enough light to keep the flash from firing automatically.
This will cause the flash to fire and illuminate your subject
whenever you press the shutter button (daylight synchro
flash).
• Using the flash while “Auto” is selected for the ISO
Sensitivity setting increases sensitivity, which can
cause large amounts of digital noise to appear in the
image. You can reduce digital noise by using a lower
ISO Sensitivity setting. Note, however, that this also
has the effect of shortening the flash range (the
range that is covered by the light from the flash)
(page 125).
I About Red-eye Reduction
Using the flash to record at night or in a dimly lit room can
cause red spots inside the eyes of people who are in the
image. This happens because the light from the flash
reflects off of the retina of the eye.
IMPORTANT!
Note the following important points when using red-
eye reduction.
• Red-eye reduction does not work unless the people
in the image are looking directly at the camera during
the pre-flash. Before pressing the shutter button, call
out to the subjects so they all look at the camera
while the pre-flash operation is performed.
• Red-eye reduction may not work very well if the
subjects are located far away from the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
BASIC IMAGE RECORDING
Flash Unit Status
Changing the Flash Intensity Setting
You can find out the current flash unit status by pressing
the shutter button half way and checking the monitor
screen and red operation lamp.
Perform the following steps to change the flash intensity
setting.
1. In a REC mode, press [MENU].
Red operation lamp*
2. Use [̇] and [̈] to select the “Quality” tab.
3. Use [̆] and [̄] to select “Flash Intensity”,
and then press [̈].
4. Use [̆] and [̄] to select the setting you
The
indicator is also shown
want, and then press [SET].
on the monitor screen when the
flash unit is ready to fire.
To make flash intensity:
Stronger
Select this setting:
+2
+1
0
* Red operation lamp
Normal
When the red operation
lamp is this:
It means this:
–1
–2
Flashing
Lit
Flash unit is charging
Weaker
Flash unit is ready to fire
IMPORTANT!
• Flash intensity may not change if the subject is too
far or too close to the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
BASIC IMAGE RECORDING
4. Use [̆] and [̄] to select “Auto”, and then
Using Flash Assist
press [SET].
Recording a subject that is outside the flash range can
cause the subject to appear dark in the resulting image,
because not enough of the flash reaches the subject. When
this happens, you can use flash assist to correct the
brightness of the recorded subject, so it appears as if the
flash illumination was sufficient.
• Selecting “Off” disables flash assist.
IMPORTANT!
• Flash assist may not produce the desired result for
some types of subjects.
• Flash assist may have little effect on your image if
you changed any of the following settings when you
recorded it.
— Flash intensity (page 66)
— Exposure compensation (EV shift) (page 83)
— ISO sensitivity (page 125)
— Contrast (page 128)
• Using flash assist can cause an increase of digital
noise in recorded images.
Flash assist used
Flash assist not used
1. In a REC mode, press [MENU].
2. Use [̇] and [̈] to select the “Quality” tab.
3. Use [̆] and [̄] to select “Flash Assist”, and
then press [̈].
Download from Www.Somanuals.com. All Manuals Search And Download.
67
BASIC IMAGE RECORDING
Flash
• When the flash is turned off (
), mount the camera on a
I Flash Precautions
tripod to record images in an area where available lighting
is dim. Recording images under dim lighting without the
flash can cause digital noise, which makes images
appear coarse.
• Take care that your fingers
do not block the flash when
you hold the camera.
Covering the flash with your
finger can greatly reduce its
effectiveness.
• When red-eye reduction (
) is selected, flash intensity
is adjusted automatically in accordance with the
exposure. The flash may not fire at all when the subject is
brightly lit.
• Using flash in combination with another light source
(daylight, fluorescent light, etc.) can result in abnormal
image colors.
• You may not be able to achieve the desired results using
the flash if the subject is too close or too far away.
• The flash takes anywhere from a few seconds to as long
as 10 seconds to attain full charge after being fired. The
actual time required depends on the battery level,
temperature, and other conditions.
• The flash does not fire in the modes listed below. The
(Flash Off) icon on the monitor screen indicates that flash
is turned off.
Movie mode, Short Movie mode, Past Movie mode,
MOVIE BEST SHOT mode
• The flash unit may not be able to charge when camera
battery power is low. If this happens, the flash will not fire
properly and you will not be able to obtain the desired
exposure. Be sure to charge the camera’s battery as soon
as possible when power goes low.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
BASIC IMAGE RECORDING
Using the Self-timer
To do this:
Select this setting:
10 sec
The self-timer lets you select either a 2-second or 10-
second delay of the shutter release after you press the
shutter button. A Triple Self-timer feature lets you perform
three consecutive self-timer operations to record three
images.
Specify a 10-second self-timer
Specify a 2-second self-timer
Specify Triple Self-timer
Disable the self-timer
10s
2 sec
X3
2
s
x3
Off
1. In a REC mode, press [MENU].
• This causes an
indicator identifying the
selected self-timer type
to appear on the
2. Use [̇] and [̈] to select the “REC” tab.
3. Use [̆] and [̄] to select “Self-timer”, and
then press [̈].
monitor screen.
• With the Triple Self-timer,
the camera records a
series of three images in
the sequence described
below.
4. Use [̆] and [̄] to select the self-timer type
you want to use, and then press [SET].
• Selecting “Off” in step 4 disables the self-timer.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
BASIC IMAGE RECORDING
AF assist light/
Self-timer lamp
1. The camera performs a 10-second countdown
and then records the first image.
5. Press the shutter
button to record the
image.
2. The camera prepares to record the next image.
The amount of time required for preparation
depends on the camera’s current “Size” and
“Quality” settings, the type of memory (built-in or
card) you are using for image storage, and
whether or not the flash is charging.
• When you press the
shutter button, the AF
assist light/self-timer
lamp flashes and the
shutter releases after the
self-timer reaches the
end of its countdown
(about 10 seconds or two
seconds).
3. After preparation is complete, the indicator “1sec”
appears on the monitor screen, and another
image is recorded one second later.
4. Steps 2 and 3 are repeated once more to record
the third image.
• You can interrupt an ongoing self-timer countdown
by pressing the shutter button while the AF assist
light/self-timer lamp is flashing.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
BASIC IMAGE RECORDING
NOTE
Specifying Image Size
• The “2 sec” self-timer setting is best when shooting
with a slow shutter speed, because it helps to avoid
blurring of images due to hand movement.
• The following functions are not available for use in
combination with the self-timer.
Normal continuous shutter mode, Short Movie mode,
Past Movie mode
• The following functions are not available for use in
combination with the Triple Self-timer.
“Image size” is the size of the image, expressed as the
number of vertical and horizontal pixels. A “pixel” is one of
the many tiny dots that make up the image. More pixels
provide finer detail when an image is printed, but a higher
pixel count also causes the image’s file size to be larger.
You can select an image size to suit your needs for greater
detail or smaller file size.
• Note that this setting is valid for snapshots only. For
information about movie image size, see page 104.
Business Shot, ID Photo, Movie mode
,
Short Movie
mode, Past Movie mode, MOVIE BEST SHOT mode
1. In a REC mode, press [MENU].
2. Use [̇] and [̈] to select the “Quality” tab.
3. Use [̆] and [̄] to select “Size”, and then
press [̈].
4. Use [̆] and [̄] to select the setting you
want, and then press [SET].
• When selecting the image size, the image size value
(pixels) will alternate on the display with a
corresponding print size. The print size indicates the
optimum paper size when you print an image that is
the image size you select.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
BASIC IMAGE RECORDING
Image Size
Print Size
A3 Print
Specifying Image Quality
×
3072 2304
Larger
Compressing an image before storage can cause a
deterioration of its quality. The more an image is
compressed, the greater the loss of quality. The image
quality setting specifies the compression ratio to be used
when an image is stored in memory. You can select an
image quality setting to suit your needs for higher quality or
smaller file size.
×
3072 2048
A3 Print (3:2 horizontal-to-
vertical ratio)
(3:2)
×
2560 1920
A3 Print
A4 Print
×
2048 1536
×
1600 × 1200
3.5˝ 5˝ Print
E-mail (optimum size when
attaching image to e-mail)
×
640 480
Smaller
• Note that this setting is valid for snapshots only. For
information about movie image quality, see page 104.
• The above print sizes are all approximate values when
printing at a resolution of 200 dpi (dots per inch). Use a
larger setting when you want to print at a higher
1. In a REC mode, press [MENU].
resolution or when you plan to produce a larger size print.
2. Use [̇] and [̈] to select the “Quality” tab.
×
• Selecting the “3072 2048 (3:2)” image size will record
images with a 3:2 (horizontal : vertical) aspect ratio, which
is optimal for printing on paper with an aspect ratio of 3:2.
3. Use [̆] and [̄] to select “
then press [̈].
Quality”, and
4. Use [̆] and [̄] to select the setting you
want, and then press [SET].
Download from Www.Somanuals.com. All Manuals Search And Download.
72
BASIC IMAGE RECORDING
To get this:
Select this setting:
Fine
High image quality, large file
size
Higher
Quality
Normal image quality and
normal file size
Normal
Low image quality, small file
size
Lower
Quality
Economy
IMPORTANT!
• Actual file size depends on the type of image you
record. This means that the remaining image
capacity noted on the monitor screen may not be
exactly accurate (pages 27, 245).
Download from Www.Somanuals.com. All Manuals Search And Download.
73
OTHER RECORDING FUNCTIONS
To set up the camera to do this:
Select this setting:
None
Selecting the Focus Mode
Focus automatically (Auto Focus)*1
Perform close-up focus (Macro)
Fix the focal distance (Pan Focus)*2
Perform infinity focus (Infinity)
You can select one of five different focus modes: Auto
Focus, Macro, Pan Focus, Infinity, and Manual Focus.
[̆] (
)
1. In a REC mode, press [̆]
Focus manually (Manual Focus)
(
).
*1 When using Icon Help (page 122), select “
Auto
• Each press of [̆] (
cycles thorough the focus
mode settings in the
)
Focus”.
*2 Pan Focus can be selected in a movie mode (Movie,
Short Movie, Past Movie, MOVIE BEST SHOT) only.
sequence shown below.
Focus mode indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
74
OTHER RECORDING FUNCTIONS
Green operation lamp
Using Auto Focus
As its name suggests, Auto Focus focuses the image
automatically. The automatic focus operation starts when
you press the shutter button down half way. The following
is the Auto Focus range.
1 / 1000
F4.0
ISO100
Range: Snapshots: 40cm to ∞ (1.3´ to ∞)
Movies: 40cm to ∞ (1.3´ to ∞)
• Using optical zoom causes the above ranges to change.
Focus frame
When you see this:
Green focus frame
Green operation lamp
It means this:
1. Press [̆] (
) to cycle through the focus
mode settings until there is no focus mode
indicator on the display.
The image is focused.
Red focus frame
Flashing green operation lamp
The image is not
focused.
• When using Icon Help (page 122), select “
Focus”.
Auto
3. Press the shutter button the rest of the way to
record the image.
2. Compose the image so the main subject is
within the focus frame, and then press the
shutter button half way.
• You can tell whether the image is focused by
observing the focus frame and the green operation
lamp.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
OTHER RECORDING FUNCTIONS
NOTE
I Quick Shutter
• When proper focusing is not possible because the
subject is closer than the Auto Focus range, the
camera automatically switches to the Macro mode
range (page 78).
• Whenever you perform an optical zoom operation
(page 61) while recording with Auto Focus, a value
will appear on the monitor screen as shown below to
tell you the focusing range.
When Quick Shutter is turned on, the camera immediately
records the image without waiting for Auto Focus to be
performed when you press the shutter release all the way
down. This helps to avoid missing a special moment while
you wait for the camera to Auto Focus.
1. In a REC mode, press [MENU].
Example: AF 40cm - ∞
2. Select the “REC” tab, select “Quick Shutter”,
and then press [̈].
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
To do this:
Select this setting:
Turn on Quick Shutter
Turn off Quick Shutter
On
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
76
OTHER RECORDING FUNCTIONS
I Specifying the Auto Focus Area
For this type of Auto Focus area:
Select this:
Spot
Very limited range in the center of the
screen
• This setting works well with focus lock
(page 82).
You can use the following procedure to change the Auto
Focus area used in the Auto Focus mode and the Macro
mode. Note that the configuration of the focus frame
changes in accordance with the Auto Focus area you
select.
Automatic selection of the focus area where
the subject closest to the camera is located
• With this setting, a wide focus frame,
which contains nine focus points, appears
on the monitor screen first. When you
press the shutter button half way, the
camera automatically selects the focus
point where the subject closest to the
camera is located, and a focus frame
appears at that point.
1. In a REC mode, press [MENU].
Multi
2. On the “REC” tab, select “AF Area”, and then
press [̈].
3. Use [̆] and [̄] to select the Auto Focus area
• This setting works well for group photos.
you want, and then press [SET].
Free movement of the focus point location
you want.
• Selecting this setting initially displays the
focus point in the center of the monitor
screen. Then you can use the [̆], [̄],
[̇], and [̈] keys to move it to the location
you want. Finally, press [SET] to select
the current focus point location.
Free
Download from Www.Somanuals.com. All Manuals Search And Download.
77
OTHER RECORDING FUNCTIONS
•
Spot
•
Multi
Using the Macro Mode
Use the Macro mode when you need to focus on close up
subjects. The following shows the approximate focus range
in the Macro mode.
Range: 10cm to 50cm (3.9˝ to 19.7˝)
• Using optical zoom causes the above range to change.
1. Press [̆] (
) to cycle through the focus
mode settings until “ ” is shown as the
focus mode indicator.
Focus frame
Focus frame
•
Free
2. Press the shutter button to record the image.
• The focus and image recording operations are
identical to those in the Auto Focus mode.
[SET]
NOTE
• When the Macro mode cannot focus properly
because the subject is too far away, the camera
automatically switches to the Auto Focus range
(page 75).
Focus point
Focus frame
• Whenever you perform an optical zoom operation
(page 61) while recording with the Macro mode, a
value will appear on the monitor screen as shown
below to tell you the focusing range.
Example: 10cm - 50cm
Download from Www.Somanuals.com. All Manuals Search And Download.
78
B
OTHER RECORDING FUNCTIONS
IMPORTANT!
Using Pan Focus
• Use of the flash along with the Macro mode can
cause the light of the flash to become blocked, which
can produce unwanted shadows in your image.
Pan Focus can be used in a movie mode (Movie, Short
Movie, Past Movie, MOVIE BEST SHOT) to focus on a
particular subject and record without using Auto Focus.
Pan Focus comes in handy when recording under
conditions where Auto Focus is difficult for some reason, or
in cases where Auto Focus operation noise is too
noticeable in the movie audio.
1. In a REC mode, enter a movie mode (page 52).
• You can perform this procedure in the Movie, Short
Movie, Past Movie or MOVIE BEST SHOT mode.
2. Press [̆] (
) to scroll through settings
until “ ” is displayed.
3. Press the shutter button to record the movie
with Pan Focus.
IMPORTANT!
• Pan Focus can be used in a movie mode (Movie,
Short Movie, Past Movie or MOVIE BEST SHOT)
only. It is disabled in all other modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
OTHER RECORDING FUNCTIONS
Using the Infinity Mode
Using Manual Focus
The Infinity mode fixes focus at infinity (∞). Use this mode
when recording scenery and other faraway images.
With the Manual Focus mode, you can adjust the focus of
an image manually. The following shows focus range in the
Manual Focus mode.
1. Press [̆] (
) to cycle through the focus
mode settings until “ ” is shown as the
focus mode indicator.
Optical Zoom Factor
Approximate Focus Range
10cm (3.9˝) to infinity (∞)
50cm (19.7˝) to infinity (∞)
1X
3X
2. Press the shutter button to record the image.
• Using optical zoom causes the above range to change.
1. Press [̆] (
) to
cycle through the
focus mode settings
until “ ” is shown
as the focus mode
indicator.
• At this point, a
boundary also appears
on the display,
Boundary
indicating the part of the
image that will be used
for manual focus.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
B
OTHER RECORDING FUNCTIONS
NOTE
2. While watching the
image on the monitor
screen, use [̇] and
[̈] to focus.
• Whenever you perform an optical zoom operation
(page 61) while recording with manual focus, a value
will appear on the monitor screen as shown below to
tell you the focusing range.
Example: MF 10cm - ∞
Manual focus position
To do this:
Do this:
Press [̇].
Press [̈].
Focus in on the subject
Focus out on the subject
• Pressing [̇] or [̈] causes the area inside of the
boundary displayed in step 1 to fill the monitor
screen momentarily to aid in focus. The normal
image will reappear a short while later.
3. Press the shutter button to record the image.
IMPORTANT!
• In the Manual Focus mode, the [̇] and [̈] keys
adjust focus, even if you used key customization to
assign other functions to them (page 120).
Download from Www.Somanuals.com. All Manuals Search And Download.
81
B
OTHER RECORDING FUNCTIONS
2. Keeping the shutter
button pressed half
way down, re-
Using Focus Lock
Focus lock is a technique you can use to focus on a subject
that is not located within the focus frame when you record
an image. You can use focus lock in the Auto Focus mode
1 / 1000
F4.0
ISO100
compose the image
as you like.
and the Macro mode (
).
Main subject
1. Using the monitor
screen, compose the
image so the main
subject is within the
focus frame, and then
press the shutter
Main subject
3. When the image is composed the way you
want, press the shutter button the rest of the
way to record it.
1 / 1000
F4.0
ISO100
• The focus and image recording operations are
identical to those in the Auto Focus mode.
button half way.
• This locks the focus on
the subject that is
currently within the
focus frame.
Focus frame
NOTE
• Locking the focus also locks the exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
OTHER RECORDING FUNCTIONS
3. Use [̆] and [̄] to
change the exposure
compensation value,
and then press [SET].
Exposure Compensation (EV Shift)
Exposure compensation lets you change the exposure
setting (EV value) manually to adjust for the lighting of your
subject. This feature helps to achieve better results when
recording a backlit subject, a strongly lit subject indoors, or
a subject that is against a dark background.
• Pressing [SET] registers
the displayed value.
EV Shift Range: –2.0EV to +2.0EV
Steps: 1/3EV
EV value
[̆] : Increases the EV value. A higher EV value is best
used for light-colored subjects and backlight
subjects.
1. In a REC mode, press [MENU].
2. Select the “Quality”
tab, select “EV Shift”,
and then press [̈].
[̄] : Decreases the EV value. A lower EV value is best
for dark-color subjects and for shooting outdoors
on a clear day.
Exposure compensation
value
Download from Www.Somanuals.com. All Manuals Search And Download.
83
B
OTHER RECORDING FUNCTIONS
• To cancel EV Shift, adjust the value until it becomes
0.0.
Adjusting White Balance
The wavelengths of the light produced by various light
sources (daylight, light bulb, etc.) can affect the color of a
subject when it is recorded. White balance lets you make
adjustments to compensate for different lighting types, so
the colors of an image appear more natural.
4. Press the shutter button to record the image.
IMPORTANT!
• When shooting under very dark or very bright
conditions, you may not be able to obtain satisfactory
results even after performing exposure
compensation.
1. In a REC mode, press [MENU].
2. Select the “Quality”
tab, select “White
Balance”, and then
press [̈].
NOTE
• Performing an EV shift operation while using multi-
pattern metering (page 126) will cause the metering
mode to switch automatically to center weighted
metering. Returning the EV shift value to 0.0 causes
the metering mode to change back to multi-pattern
metering.
• You can use key customization (page 120) to
configure the camera to perform exposure
compensation whenever you press [̇] or [̈] while in
a REC mode. This comes in handy when adjusting
exposure compensation while viewing the on-screen
histogram (page 117).
Download from Www.Somanuals.com. All Manuals Search And Download.
84
OTHER RECORDING FUNCTIONS
NOTE
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
• When “Auto” is selected for the white balance
setting, the camera automatically determines the
white point of the subject. Certain subject colors and
light source conditions can cause problems when the
camera tries to determine the white point, which
makes proper white balance adjustment impossible.
When this happens, use daylight, cloudy, or one of
the other fixed white balance settings to specify the
type of lighting available.
• You can use the key customization feature (page
120) to configure the camera so the white balance
setting changes whenever you press [̇] or [̈] while
in a REC mode.
When shooting under these conditions: Select this setting:
Normal conditions
Auto
Outdoor daylight on a clear day
Outdoor daylight on an overcast or
rainy day, in the shade of a tree, etc.
In the shade of a building or any other
area where the color temperature is
high
Under white or daylight white
fluorescent light
(suppresses color fogging)
1
2
• If you have key customization configured to control
white balance and you have Icon Help turned on
Under daylight fluorescent light
(suppresses color fogging)
(page 122), select “
Auto WB” to change the
AWB
white balance mode to auto.
Under incandescent lighting
Difficult lighting that requires manual
control (See “Configuring the White
Balance Setting Manually” (page 86).)
Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
85
OTHER RECORDING FUNCTIONS
3. Use [̆] and [̄] to
select “Manual”.
Configuring the White Balance Setting
Manually
Certain complex light sources or other environmental
conditions can make it impossible to obtain good results
when “Auto” or one of the fixed light source settings is
selected for white balance. Manual white balance lets you
configure the camera for a particular light source and other
conditions.
Note that you must perform manual white balance under
the same conditions you will be shooting under. Have a
sheet of white paper on hand before starting the following
procedure.
• This causes the object
you last used to adjust
manual white balance to
appear on the monitor
screen. If you want to use
the same settings you
configured during a
previous manual white
balance setting
operation, skip step 4
and perform step 5.
4. Point the camera at a white paper or similar
object under the lighting conditions for which
you want to set the white balance, and then
press the shutter button.
1. In a REC mode, press [MENU].
2. Select a “Quality” tab, select “White
Balance”, and then press [̈].
White paper
Download from Www.Somanuals.com. All Manuals Search And Download.
86
OTHER RECORDING FUNCTIONS
• This starts the white balance adjustment procedure.
The message “Complete” appears on the monitor
screen after white balance adjustment is complete.
Using the Manual Exposure mode
In the M mode (manual exposure), you can adjust shutter
speed and aperture manually.
5. Press [SET].
• This registers the white balance settings and returns
to the currently selected recording mode.
1. Align the mode dial with “M” (Manual).
NOTE
Exposure mode
Shutter speed value
Aperture value
• After you adjust white balance manually, the setting
remains in effect until you change it or until you turn
off the camera.
Manual focus setting
2. Press [SET] to select the shutter speed value
(page 28) in the exposure panel, and then use
[̇] and [̈] to change the setting.
Slow
60 seconds
Blurred
Fast
Shutter speed
Movement
1/1600 second
Stopped
Download from Www.Somanuals.com. All Manuals Search And Download.
87
OTHER RECORDING FUNCTIONS
3. Press [SET] to select the aperture value (page
28) in the exposure panel, and then use [̇]
and [̈] to change the setting.
5. When the image is focused, press the shutter
button all the way down to record.
NOTE
Wide
Small
F2.8, F4.0
Deep
Aperture value*
• You can also perform the following operation in the
M mode (manual exposure).
1. Press [SET] to select the exposure mode (page
28) in the exposure panel.
Depth of Field
Shallow
* The above values are full wide angle optical zoom.
Aperture values are different at other optical zoom
settings.
2. Use [̇] and [̈] to select “S” (shutter speed
priority AE) or “A” (aperture priority AE).
3. Set the aperture (if you selected “S” above) or
shutter speed (if you selected “A”), and the other
setting will be configured automatically.
• While the “S” or “A” mode is selected, you can press
[SET] to select “EV shift” (page 28) in the exposure
panel, and then use [̆] and [̈] to adjust the EV shift
value (page 83).
• If you are using manual focus (page 80), you can
also press [SET] to select “FOCUS” (manual focus
setting) (page 28) in the exposure panel, and then
use [̇] and [̈] to focus manually.
4. Press the shutter button half way.
• This causes the camera to adjust focus automatically.
• If the image is over-exposed or under-exposed, the
shutter speed and aperture setting shown on the
monitor screen will turn amber when you press the
shutter button half way.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
OTHER RECORDING FUNCTIONS
IMPORTANT!
Using a Continuous Shutter Mode
• You may not be able to achieve the brightness you
want when recording an image that is very dark or
very bright. If this happens, use the M mode (manual
exposure) to adjust the aperture or shutter speed
manually.
• Using slow shutter speeds can cause digital noise
(graininess) to appear in the image. Because of this,
the camera automatically performs a digital noise
reduction process whenever the shutter speed is 1/8
second or slower. The slower the shutter speed, the
greater the possibility that digital noise will be
generated in an image. Because of the time required
for noise reduction, it takes longer to record images
at slower shutter speeds. Do not perform any key
operation while image recording is being performed,
which is indicated when the green operation lamp is
flashing.
You can configure the camera to record only a single
snapshot each time the shutter button is pressed, or to
keep recording as long as the shutter button remains
depressed (continuous shutter). You can select from
among three different continuous shutter modes.
• Normal continuous shutter mode
This mode records images as long as you keep the
shutter button depressed.
• Zoom continuous shutter mode
In this mode, you can select an area on the monitor
screen with a selection boundary. Then when you press
the shutter button, the camera records the monitor screen
image and the area enclosed in the selection boundary,
digitally zoomed to twice its normal size.
• Multi continuous shutter mode
Pressing the shutter button once records 25 consecutive
stop-action shots at high speed and combines them into a
single image.
• At shutter speeds slower than 1/8 second, the
brightness of the recorded image may not be the
same as the brightness of the image that appears on
the monitor screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
89
OTHER RECORDING FUNCTIONS
NOTE
Using the Normal Continuous Shutter
Mode
Holding down the shutter button continuously records
images, as long as there is memory available to store them.
• Recording Speed: Depends on image size and image
quality settings.
• You can also select a continuous shutter mode by
holding down [
with [̆] and [̄], and then releasing [
], selecting the mode you want
].
• Number of Shots: Maximum number of shots possible
(based on remaining memory capacity)
1. In a REC mode, press
[
].
2. Use [̆] and [̄] to select “ ”, and then press
[SET].
• This causes “
” to appear on the monitor screen.
3. Press the shutter button to record.
• Recording continues as long as you keep the shutter
button depressed. Release the shutter button to stop
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
90
OTHER RECORDING FUNCTIONS
IMPORTANT!
Using the Zoom Continuous Shutter
Mode
• Note with the above procedure, you do not need to
keep the shutter button depressed.
The zoom continuous shutter mode displays a selection
boundary that you can use to select an area in the monitor
screen. Then when you press the shutter button, the
camera records the monitor screen image and the area
enclosed in the selection boundary, digitally zoomed to
twice its normal size.
• Note that zoom continuous shutter operation is not
×
available when the image size setting is 3072 2048
×
(3:2) or 640 480.
• The size of the digitally processed images is smaller
than the camera’s current image size setting.
Example: When the camera’s current image size
×
setting is 3072 2304 pixels, the size of
the digitally processed images produced
by a zoom continuous shutter operation
1. In a REC mode, press [
].
×
will be 1600 1200 pixels.
2. Use [̆] and [̄] to select “ ”, and then
Z
• When Auto Focus is selected as the focus mode, the
metering mode automatically switches to “Spot”
(pages 75, 77) and locates the Auto Focus area in
the center of the Zoom Continuous Shutter selection
boundary.
press [SET].
• This causes “
” to appear, along with a selection
Z
boundary in the center of the monitor screen.
3. Use [̆], [̄], [̇], and [̈] to move the
selection boundary to the area of the monitor
screen you want, and then press [SET].
4. Press the shutter button once to record.
• This records two images: the image on the monitor
screen and the image within the selection boundary,
digitally zoomed to twice its normal size.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
B
OTHER RECORDING FUNCTIONS
IMPORTANT!
25-shot Stop Action Images (Using the
Multi Continuous Shutter Mode)
• Note with the above procedure, you do not need to
keep the shutter button depressed.
Use the following procedure to
record 25 consecutive stop-
action shots at high speed
and combine them into a
single image.
×
• The size of the 25-shot images is 1600 1200
pixels.
1. In a REC mode, press [
].
2. Use [̆] and [̄] to select “ ”, and then press
[SET].
• This causes “
” to appear on the monitor screen.
3. Press the shutter button once to record.
• After 25 shots are recorded, they are combined into
a single image, which is stored in memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
OTHER RECORDING FUNCTIONS
Continuous Shutter Precautions
Using the BEST SHOT Mode
• The flash is disabled while a continuous shutter mode is
being used.
Selecting one of the BEST SHOT sample scenes
automatically sets up the camera for recording a similar
type of image.
• You cannot use the self-timer in combination with the
normal continuous shutter mode. Also, you cannot use
the zoom continuous shutter mode or multi continuous
shutter mode in combination with the Triple Self-timer
(page 69).
I Example Sample Scene
• The slowest possible shutter speed setting when using
the multi continuous shutter mode is 1/15 second.
• Starting a continuous shutter operation causes the
exposure and focus settings to be fixed at the levels for
the first image. The same settings are applied to all
subsequent images.
• Portrait
• Scenery
• When using a continuous shutter mode, keep the camera
still until all recording is finished.
• A continuous shutter operation may stop part way through
if memory capacity runs low.
• Using a slow shutter speed setting causes a longer
interval between images.
• Night Scene
• Night Scene Portrait
Download from Www.Somanuals.com. All Manuals Search And Download.
93
OTHER RECORDING FUNCTIONS
IMPORTANT!
1. In a REC mode, align
the mode dial with
• BEST SHOT scenes were not recorded using this
camera. They are provided as samples only.
• Due to shooting conditions and other factors, an
image recorded using the setup of a BEST SHOT
scene may not produce exactly the results you
expect.
• You can change the camera settings that are made
when you select a BEST SHOT scene. Note,
however, that the BEST SHOT settings revert to their
defaults when you select another BEST SHOT scene
or turn off the camera. If you want to save your
settings for later use, save them as a BEST SHOT
user setup.
“
”, and then press
[SET].
• This enters the BEST
SHOT mode and displays
a sample scene.
2. Use [̇] and [̈] to select the sample scene
you want, and then press [SET].
• If you want to check which sample scene is currently
selected or if you want to change to a different
scene, press [SET] again.
• Digital noise reduction processing is performed
automatically when you are recording a night scene,
fireworks, or other image that requires slow shutter
speeds. Because of this, it takes longer to record
images at lower shutter speeds. Make sure that you
do not perform any camera button operations until
the image recording operation is complete.
• When recording the image of a night scene,
fireworks, or some other image using a slow shutter
speed, use of a tripod is recommended to prevent
hand movement.
3. Press the shutter button to record the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
OTHER RECORDING FUNCTIONS
NOTE
Displaying 12 BEST SHOT Sample
Scenes on a Single Screen
This feature lets you view the BEST SHOT sample scenes
at a glance so you can more easily find the one you want.
• Operation guidance and the currently selected BEST
SHOT scene appear on the display for about two
seconds if the camera is in the BEST SHOT mode
when you turn it on.
1. In a REC mode, align the mode dial with “ ”,
and then press [SET].
2. Move the zoom
controller in the
direction of “ ”.
• This displays 12 sample
scenes, with a selection
boundary located at the
scene that was
displayed when you
performed step 2.
• Sample scenes are arranged in sequence, starting
from the upper left corner.
• Use [̇] and [̈] to move the selection boundary
around the display. Scrolling past the last or the first
scene scrolls to the next screen of 12-sample
scenes.
• Moving the zoom controller in the direction of “
will exit the 12-scene screen.
”
Download from Www.Somanuals.com. All Manuals Search And Download.
95
OTHER RECORDING FUNCTIONS
3. Use [̆], [̄], [̇], and [̈] to select the sample
Creating Your Own BEST SHOT Setup
You can use the procedure below to save the setup of an
image you recorded as a BEST SHOT scene. After that,
you can recall the setup whenever you want to use it.
scene you want, and then press [SET].
4. Press the shutter button to record the image.
1. In a REC mode, align the mode dial with “ ”,
and then press [SET].
• This enters the BEST SHOT mode and displays a
sample scene.
2. Use [̇] and [̈] to
display “Register
User Scene”.
3. Press [SET].
4. Use [̇] and [̈] to
display the image
whose setup you
want to register as a
BEST SHOT scene.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
B
OTHER RECORDING FUNCTIONS
NOTE
5. Use [̆] and [̄] to select “Save”, and then
press [SET].
• The following are the settings that are included in a
BEST SHOT user setup: focus mode, EV shift value,
white balance mode, flash mode, ISO sensitivity,
Metering, Flash Intensity, Flash Assist, Sharpness,
Saturation, and Contrast.
• This registers the setup. Now you can use the
procedure on page 94 to select your user setup for
recording.
• Note that images recorded with this camera only can
be used to create a BEST SHOT user setup.
• You can have up to 999 BEST SHOT user setups in
the camera’s built-in memory at one time.
• You can check the current setup of a scene by
displaying the various setting menus.
IMPORTANT!
• BEST SHOT user setups are located in the camera’s
built-in memory following the built-in sample scenes.
• Note that formatting built-in memory (page 175)
deletes all BEST SHOT user setups.
• When you register a BEST SHOT user setup, it is
automatically assigned a file name using the format
shown below, and stored in the “SCENE” folder.
UZ750nnn.JPE (n = 0 to 9)
Download from Www.Somanuals.com. All Manuals Search And Download.
97
OTHER RECORDING FUNCTIONS
To delete a BEST SHOT user setup
Recording Images of Business Cards and
Documents (Business Shot)
1. In a REC mode, align the mode dial with “ ”,
Recording a business card, document, whiteboard, or
similarly shaped object from an angle can cause the
subject to appear misshaped in the resulting image.
Business Shot automatically corrects the shape of
rectangular objects to make them appear like the camera
was positioned directly in front of them.
and then press [SET].
2. Use [̇] and [̈] to display the user setup you
want to delete.
3. Press [̄] (
) to delete the user setup.
4. Use [̆] and [̄] to select “Delete”.
5. Press [SET] to delete the file.
6. Press [MENU].
Before keystone
correction
After keystone
correction
Download from Www.Somanuals.com. All Manuals Search And Download.
98
OTHER RECORDING FUNCTIONS
NOTE
I Setup Sample Images
• When the camera is at an angle to a business card
or document it is recording, the shape of the
business card or document may appear distorted in
the image. Auto keystone correction corrects for this
distortion, which means that subjects appear normal
even if you record at an angle.
• Business cards and
documents
• White board, etc.
IMPORTANT!
• Before recording, compose the image so outline of
the item you want to record fits entirely within the
monitor screen. The camera will not be able to detect
the shape of the subject correctly unless it is
enclosed entirely within the monitor screen.
• The camera also will be unable to detect the shape
of the subject if it is the same color as the
background. Make sure the subject is against a
background that allows the outline of the subject to
stand out.
• Digital zoom is disabled while recording with
Business Shot. However, you can use optical zoom.
Download from Www.Somanuals.com. All Manuals Search And Download.
99
OTHER RECORDING FUNCTIONS
4. Use [̇] and [̈] to select the candidate you
To use Business Shot
want to correct.
1. In a REC mode, align the mode dial with “ ”,
5. Use [̆] and [̄] to
select “Correct”, and
then press [SET].
and then press [SET].
2. Use [̇] and [̈] to select the Business Shot
• Selecting “Cancel” in
place of “Correct” stores
the original image as-is,
without correcting it.
image you want, and then press [SET].
3. Press the shutter
button to record the
image.
IMPORTANT!
• This displays a screen
that shows all of the
objects in the image that
qualify as candidates for
keystone correction. An
error message will
×
• The maximum Business Shot image size is 1600
1200 pixels, even if the camera is configured for a
larger image size. An image size setting smaller than
×
1600 1200 pixels records images at the specified
size.
appear (page 243) if the
camera is unable to find
any suitable keystone
correction candidate in
the image. After a short
while, the original image
will be stored in memory,
as-is.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
OTHER RECORDING FUNCTIONS
• The initial temporary image is not stored in camera
memory. The final image is stored in camera
memory when you perform step 5.
Recording an ID Photo
You can use this procedure to record a portrait and then
print a variety of different standard size ID photos. Note
that you need to use the BEST SHOT mode (page 93) to
record an ID photo.
• Printing an ID photo produces a single sheet containing
five ID photos of the following sizes.
4. Adjust the position of the subject as
described below.
To do this:
Select this setting:
Press [̆] or [̄].
×
×
×
×
30 24 mm (1.2˝ 0.94˝), 40 30 mm (1.6˝ 1.2˝),
Shift the subject up or down
Shift the subject left or right
×
×
×
×
45 35 mm (1.8˝ 1.4˝), 50 40 mm (2.0˝ 1.6˝),
Press [̇] or [̈].
×
×
55 45 mm (2.2˝ 1.8˝)
Zoom in on the subject
(to make it larger)
Move the zoom controller
towards “
”.
1. In a REC mode, align the mode dial with “ ”,
Zoom out on the subject
(to make it smaller)
Move the zoom controller
towards “
”.
and then press [SET].
2. Use [̇] and [̈] to select the “ID Photo”
Head line
scene, and then press [SET].
3. On the monitor
screen, compose the
image by positioning
the subject within the
on-screen frame, and
then press the shutter
button to record an
initial temporary
Chin line
• Adjust the image so the head of the subject is
aligned with the head line at the top of the frame,
and the chin of the subject is aligned with the chin
line.
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
B
OTHER RECORDING FUNCTIONS
5. After positioning the subject in the frame,
press [SET].
Printing an ID Photo
Printing an ID photo will print five versions of the same
image in the sizes shown below on a single sheet of paper.
Then you can cut out the image(s) you want to use.
• Only the final image that is on the screen when you
press [SET] in step 5 is stored in camera memory.
×
×
×
×
30 24 mm (1.2˝ 0.94˝), 40 30 mm (1.6˝ 1.2˝),
×
×
×
×
45 35 mm (1.8˝ 1.4˝), 50 40 mm (2.0˝ 1.6˝),
IMPORTANT!
×
×
55 45 mm (2.2˝ 1.8˝)
×
• The image size of an ID photo is always 3072 2304
pixels, regardless of the camera’s current image size
setting.
IMPORTANT!
• The above sizes are not exact. Actual image sizes
may differ slightly from those noted above.
×
• When printing an ID photo, be sure to print on 4˝ 6˝
size paper (page 190). Images may not print at the
proper sizes if another size of paper is used.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
OTHER RECORDING FUNCTIONS
—
MOVIE BEST SHOT mode
Recording a Movie
This mode makes camera setup as easy as selecting
the applicable sample scene. Select one of the MOVIE
BEST SHOT scenes and the camera automatically
configures itself with the setup for that scene (page
110).
You can record high-resolution movies with audio. Movie
length is limited only by the amount of memory available for
storage. You can select a resolution setting to suit your
needs, and a variety of different movie modes provide
plenty of movie making versatility.
NOTE
• File Format: MPEG-4 AVI format
• You can play movie files on your computer using
Windows Media Player 9.
• Maximum Movie Length
— The length of a movie is limited only by the amount of
memory available to store it.
• Versatile Movie Recording Modes
—
Movie mode
Use this mode for normal movie recording (page 105).
—
Short Movie mode
Each press of the shutter button in this mode records
a short movie that starts before the button is pressed
and ends after the button is pressed (page 106).
—
Past Movie mode
This mode uses a 5-second buffer that is continually
updated. Pressing the shutter button starts recording
from five seconds prior to the point the button is
pressed. Use this mode when you want to make sure
you do not miss fast-moving action (page 108).
Download from Www.Somanuals.com. All Manuals Search And Download.
103
OTHER RECORDING FUNCTIONS
Approximate
Data Rate
Specifying Movie Image Quality
Setting
Frame Rate
The image quality setting determines how much the
camera compresses movie images before storing them.
Image quality is expressed as image size in pixels. A
“pixel” is one of the many tiny dots that make up an image.
More pixels (a larger image size) provide finer detail and
higher image quality when a movie is played back.
Before recording a movie, select the image quality setting
that suits your needs.
Higher HQ
4.0 megabits
30 frames/
second
×
Quality (640 480 pixels) per second
Normal 2.1 megabits
(640 480 pixels) per second
Lower LP 745 kilobits
Quality (320 240 pixels) per second
30 frames/
second
×
15 frames/
second
×
1. In a REC mode, press [MENU].
2. Use [̇] and [̈] to select the “Quality” tab.
3. Use [̆] and [̄] to select “
then press [̈].
Quality” , and
4. Use [̆] and [̄] to select the setting you
want, and then press [SET].
Download from Www.Somanuals.com. All Manuals Search And Download.
104
OTHER RECORDING FUNCTIONS
3. To stop movie recording, press the shutter
button again.
Recording a Standard Movie
(Movie Mode)
Use the Movie Mode when you want to record a standard
movie.
• When movie recording is complete, the movie file is
stored in file memory.
Remaining recording time
1. In a REC mode, align
the mode dial with
“
”.
• This enters the Movie
mode and causes “
appear on the monitor
screen.
” to
Recording time
2. Point the camera at the
subject and then press
the shutter button.
• Movie recording
continues as long as
remaining memory
capacity allows.
Download from Www.Somanuals.com. All Manuals Search And Download.
105
B
OTHER RECORDING FUNCTIONS
I To record a Short Movie Mode movie
Recording a Short Movie
(Short Movie Mode)
The Short Movie Mode records a movie of preset length
each time you press the shutter button.
A Short Movie Mode movie consists basically of two parts,
as shown in the illustration below.
1. In a REC mode, align the mode dial with “ ”.
• This enters the Short Movie Mode and causes “
to appear on the monitor screen.
”
2. Press [SET].
• When 4-second past part and 4-second future part is
specified
Past part
Future part
3. Use [̆] and [̄] to
specify the length of
the past part (the part
before the shutter
Shutter
Release
Operation ➝
Record
Store
button is pressed),
and then press [̈].
• Times can be specified
in one-second units.
Action ➝ Stores the
previous
Recording
of the future
part starts.
Storage
complete.
4 seconds.
Recording stops automatically
4 seconds after the shutter
release button is pressed.
• The total short movie
length (past part plus
future part) can be the
range of two seconds to
eight seconds.
MOTION PRINT
You can specify the length of the past part and the future
part independently. The total length of the short movie can
be anywhere from two to eight seconds. A MOTION PRINT
feature (page 140) lets you capture still images from a
short movie as you store it.
• You can specify 0 seconds for the length of the past
part or the future part.
• The length of the past part can be from 0 to five
seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
106
B
OTHER RECORDING FUNCTIONS
4. Use [̆] and [̄] to specify the length of the
future part (the after part the shutter button is
pressed), and then press [̈].
6. Point the camera at the subject and then
press the shutter button.
• This will record a movie of the length specified by the
time values you specified in steps 3 and 4.
Recording stops automatically.
5. Use [̆] and [̄] to select the MOTION PRINT
layout format you want, and then press [SET].
• To stop recording part way through, press the shutter
button again.
Select this
To do this:
setting:
IMPORTANT!
Store a capture of the
image at the point the
shutter button is pressed
to start Short Movie
• Note that in the Short Movie Mode, movie data is
continually recorded and stored in a buffer before
you press the shutter button. Be sure to keep the
camera still and pointed in the direction of the
subject for some time before you press the shutter
button to start recording.
9 frames
Mode recording, and
display it on a
background of eight
frames
• When a Short Movie Mode record operation starts
future part recording, the monitor screen will show a
countdown of the remaining recording time.
Recording continues until the end of the countdown
is reached.
Store a capture of the
image at the point the
shutter button is pressed
to start Short Movie
Mode recording
1 frame
Turn off MOTION PRINT (no snapshot stored) Off
Download from Www.Somanuals.com. All Manuals Search And Download.
107
OTHER RECORDING FUNCTIONS
2. Point the camera at the subject and then
press the shutter button.
Recording Past Action
(Past Movie Mode)
This mode uses a 5-second buffer that is continually
updated. Pressing the shutter button starts recording from
five seconds prior to the point the button is pressed. Use
this mode when you want to make sure you do not miss
fast-moving action.
• This will record anything that went on in front of the
lens during the previous five seconds and continue
recording from the point that the shutter button was
pressed. Recording can continue as long as there is
memory available to store data.
3. To stop recording, press the shutter button
again.
Shutter
Release
Shutter
Release
Operation ➝
Record
Store
Action ➝ Stores the
Recording
Recording
ends.
Storage
complete.
previous
of the future
5 seconds. part starts.
1. In a REC mode, align the mode dial with
”.
“
• This enters the Past Movie Mode and causes “
appear on the monitor screen.
” to
Download from Www.Somanuals.com. All Manuals Search And Download.
108
OTHER RECORDING FUNCTIONS
— Auto Focus is not performed in the case of the Pan
Focus ( ), Manual Focus ( ) and Infinity (
I Movie Recording Precautions
)
• The flash does not fire in the Movie mode.
• This camera also records audio. Note the following points
when recording a movie.
focus modes, and so no confirmation tone sounds. In
the case of the Manual Focus mode, you cannot adjust
focus settings while recording is in progress. Be sure
to make all adjustments before beginning the record
operation.
Microphone
— Take care that you do not
block the microphone
with your fingers.
• Very bright light inside of an image can cause a vertical
band to appear in the monitor screen image. This is a
CCD phenomenon known as “vertical smear”, and does
not indicate malfunction of the camera. Note that vertical
smear is not recorded with the image in the case of a
snapshot, but it is recorded in the case of a movie.
• Certain types of memory cards take longer to record data,
— Good recording results
are not possible when the
camera is too far from the
subject.
— Operating camera
buttons during recording
can cause button noise to
be included in the audio.
— Movie audio is recorded
in monaural.
which can cause movie frames to be dropped.
and
REC
flash on the monitor screen during recording to let
you know when a frame has been dropped.
• Optical zoom is disabled during movie recording. Digital
zoom only is available. Make sure you select the optical
zoom setting you want to use before you press the
shutter button to start movie recording (page 61).
• The effects of camera movement in an image become
more pronounced when you record close ups or recording
with a large zoom factor. Because of this, use of a tripod
is recommended when recording close ups or recording
with a large zoom factor.
— The camera focuses automatically whenever you have
Auto Focus or Macro ( ) (page 74) selected as the
focus mode. Note that the confirmation tone that
sounds during the Auto Focus operation will be
recorded in the audio. If you do not want confirmation
tones in your audio, keep Pan Focus (
focus mode, or select Manual Focus (
) as the
) and
manually focus the image before starting your
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
109
B
OTHER RECORDING FUNCTIONS
• Images may be out of focus if the subject is outside the
shooting range of the camera.
Instant Movie Setups
(MOVIE BEST SHOT Mode)
• Entering the Movie mode, Short Movie mode, Past Movie
mode, or MOVIE BEST SHOT mode automatically
changes the focus mode to Pan Focus (page 79),
regardless of the current mode memory’s (page 123)
Focus setting.
Selecting one of the MOVIE BEST SHOT sample scenes
automatically sets up the camera for recording a similar
type of movie.
• Certain types of subjects are difficult to focus (page 59)
and may cause blurry images. If this happens, try
changing the focus mode to Manual Focus (page 80) or
Pan Focus (page 79).
• If images are out of focus when using Auto Focus, you
may be able to achieve proper focus by pointing the
camera at another subject momentarily.
1. In a REC mode, align the mode dial with “ ”,
and then press [SET].
• This enters the MOVIE BEST SHOT Mode and
causes “
” to appear on the monitor screen.
2. Use [̇] and [̈] to select the sample scene
you want, and then press [SET].
• If you want to change to a different sample scene at
this point, press [SET] again. Pressing [SET] also
displays the currently selected scene.
3. Point the camera at the subject and then
press the shutter button.
4. To stop movie recording, press the shutter
button again.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
B
OTHER RECORDING FUNCTIONS
IMPORTANT!
Displaying All of the MOVIE BEST SHOT
Sample Scenes on a Single Screen
This feature lets you view the MOVIE BEST SHOT sample
scenes at a glance so you can more easily find the one you
want.
• MOVIE BEST SHOT scenes were not recorded using
this camera. They are provided as samples only.
• Images recorded using a MOVIE BEST SHOT scene
may not produce the results you expected due to
shooting conditions and other factors.
• You can change the camera settings that are made
when you select a MOVIE BEST SHOT scene. Note,
however, that the MOVIE BEST SHOT settings
revert to their defaults when you select another
MOVIE BEST SHOT scene, change the recording
mode, or turn off the camera. If you want to save
your settings for later use, save them as a MOVIE
BEST SHOT user setup.
1. In a REC mode, align the mode dial with “ ”,
and then press [SET].
2. Move the zoom controller in the direction of
“
”.
• This displays all of the MOVIE BEST SHOT sample
scenes, with a selection boundary located at the
scene that was displayed when you performed step
2.
NOTE
• Turning on the camera while it is in the MOVIE BEST
SHOT Mode will cause operation guidance and the
currently selected sample scene to appear on the
monitor screen for about two seconds.
• Sample scenes are arranged in sequence, starting
from the upper left corner.
• If there are more than 12 scenes (because you have
added some custom scenes), the screen will scroll to
show the remaining screens when you press [̇] or
[̈] while the selection boundary is located at the left
or right edge of the screen.
• Moving the zoom controller in the direction of “
will exit the MOVIE BEST SHOT scene display.
”
Download from Www.Somanuals.com. All Manuals Search And Download.
111
OTHER RECORDING FUNCTIONS
3. Use [̆], [̄], [̇], and [̈] to select the sample
Creating Your Own MOVIE BEST SHOT
Setup
scene you want, and then press [SET].
You can use the procedure below to save the setup of a
movie you recorded as a MOVIE BEST SHOT scene. After
that, you can recall the setup whenever you want to use it.
4. Press the shutter button to record the image.
1. In a REC mode, align the mode dial with “ ”,
and then press [SET].
• This enters the MOVIE BEST SHOT Mode and
displays a sample scene.
2. Use [̇] and [̈] to display “Register User
Scene”.
3. Press [SET].
4. Use [̇] and [̈] to display the movie whose
setup you want to save.
5. Use [̆] and [̄] to select “Save”, and then
press [SET].
• The normal MOVIE BEST SHOT screen will
reappear after the save operation is complete. Now
you can use the procedure on page 110 to select
your user setup for recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
B
OTHER RECORDING FUNCTIONS
IMPORTANT!
I To delete a MOVIE BEST SHOT user setup
• When selecting a user setup, scroll to the end of the
built-in MOVIE BEST SHOT scenes until “Recall
User Scene” appears on the display. Then scroll
further to see the user setup scenes.
• Formatting the camera’s built-in memory (page 175)
deletes all user MOVIE BEST SHOT setups.
• The following are the settings that are included in a
MOVIE BEST SHOT user setup.
1. In the MOVIE BEST SHOT Mode, press [SET].
2. Use [̇] and [̈] to scroll through user setups
until the one you want to delete is displayed.
3. Press [̄] (
).
Focus mode, white balance mode, sharpness,
saturation, contrast, EV shift
• Only the setup of a movie recorded with this camera
can be saved as a MOVIE BEST SHOT setup.
• You can register up to 999 MOVIE BEST SHOT user
setups.
4. Use [̆] and [̄] to select “Delete”, and then
press [SET].
5. Press [MENU].
• You can check the settings of the currently selected
MOVIE BEST SHOT scene by displaying the various
setting menus.
• MOVIE BEST SHOT user setups are stored in
camera built-in memory in the folder named
“MSCENE”. File names are assigned automatically
using the format shown below.
UZ750nnn.JPE (n = 0 to 9)
Download from Www.Somanuals.com. All Manuals Search And Download.
113
OTHER RECORDING FUNCTIONS
1. In a REC mode, press [MENU].
Recording Audio
2. Select the “REC” tab, select “Audio Snap”,
and then press [̈].
Adding Audio to a Snapshot
You can add audio to a snapshot after you record it.
3. Use [̆] and [̄] to select “On” and then
• Image Format: JPEG
JPEG is an image format that provides efficient data
compression.
press [SET].
• This enters the Audio Snapshot mode.
• Selecting “Off” enters the Normal Snapshot mode
(no audio).
The file extension of a JPEG file is “.JPG”.
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
4. Press the shutter
button to record the
image.
• Recording Time:
Up to about 30 seconds per image
• After the image is
recorded, the camera
enters audio recording
standby, with the image
you just recorded on the
• Audio File Size:
Approximately 165KB (30-second recording of
approximately 5.5KB per second)
Remaining recording time
monitor screen and
displays a
indicator.
NOTE
• You can cancel audio recording standby by pressing
[MENU].
• You can play back an audio file recorded in the
Audio Snapshot mode on your computer using
Windows Media Player.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
OTHER RECORDING FUNCTIONS
5. Press the shutter button to start audio
recording.
Recording Your Voice
The Voice Recording mode provides quick and easy
recording of your voice.
• The green operation lamp will flash while recording is
in progress.
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
• If you have the monitor screen turned off (page 30),
the monitor screen turns on while you are adding
audio to a snapshot.
• Recording Time:
Approximately 25 minutes with built-in memory
6. Recording stops after about 30 seconds or
when you press the shutter button.
• Audio File Size:
Approximately 165KB (30-second recording of
approximately 5.5KB per second)
IMPORTANT!
• The Audio Snapshot mode is unavailable during
image recording using Triple Self-timer.
NOTE
• You can play back files recorded in the Voice
Recording mode on your computer using Windows
Media Player.
Download from Www.Somanuals.com. All Manuals Search And Download.
115
OTHER RECORDING FUNCTIONS
NOTE
1. In a REC mode, align
the mode dial with
“ ”.
Recording time
• Holding down [DISP] as you press the power button
or [
without extending the lens.
] (REC) enters the Voice Recording mode
• This enters the Voice
Recording mode and
causes “
” to appear
on the monitor screen.
Remaining recording time
2. Press the shutter button to start voice
recording.
• The remaining recording time value counts down on
the monitor screen and the green operation lamp
flashes as recording is performed.
• Pressing [DISP] during voice recording turns off the
monitor screen.
• You can insert index marks while recording by
pressing [SET]. See page 154 for information about
jumping to an index mark during playback.
3. Recording stops when you press the shutter
button, when memory becomes full, or when
the battery goes dead.
Download from Www.Somanuals.com. All Manuals Search And Download.
116
OTHER RECORDING FUNCTIONS
I Audio Recording Precautions
Using the Histogram
Microphone
• Take care that you do not
block the microphone with
your fingers.
You can use [DISP] to display a histogram on the monitor
screen. The histogram lets you check exposure conditions
as you record images (page 30). You can also display the
histogram of a recorded image in the PLAY mode.
• Good recording results are not possible when the camera
is too far from the subject.
• Pressing the power button or pressing [
] (PLAY) stops
recording and stores any audio recorded up to that point.
• You can also perform “after-recording” to add audio to a
snapshot after recording it, and also change the audio
recorded for an image. See page 152 for more
information.
Histogram
• A histogram is a graph that represents the lightness of an
image in terms of the number of pixels. The vertical axis
indicates the number of pixels, while the horizontal axis
indicates lightness. You can use the histogram to
determine whether an image includes the shadowing (left
side), mid tones (center), and highlighting (right) required
to bring out sufficient image detail. If the histogram
appears too lopsided for some reason, you can use EV
shift (exposure compensation) to move it left or right in
order to achieve better balance. Optimum exposure can
be achieved by correcting exposure so the graph is as
close to the center as possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
117
OTHER RECORDING FUNCTIONS
• An RGB histogram that shows the distribution of R (red),
G (green), and B (blue) components is also displayed.
This histogram can be used to determine whether there is
too much or too little of each of the color components in
an image.
• When the histogram is too far
to the right, it means that
there are too many light
pixels.
This type of histogram results
when the overall image is
light. A histogram that is too
far to the right may result in
“white out” of the light areas of
an image.
NOTE
• You can use key customization (page 120) to
configure the camera to perform exposure
compensation whenever you press [̇] or [̈] while in
a REC mode. If you do this, you can adjust exposure
compensation while viewing the on-screen histogram
(page 83).
• A centered histogram
indicates that there is good
distribution of light pixels and
dark pixels. This type of
histogram results when the
overall image is at optimal
lightness.
• When the histogram is too far
to the left, it means that there
are too many dark pixels.
This type of histogram results
when the overall image is
dark. A histogram that is too
far to the left may result in
“black out” of the dark areas
of an image.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
OTHER RECORDING FUNCTIONS
IMPORTANT!
REC Mode Camera Settings
• Note that the above histograms are shown for
illustrative purposes only. You may not be able to
achieve exactly the same shapes for particular
subjects.
• A centered histogram does not necessarily
guarantee optimum exposure. The recorded image
may be over-exposed or under-exposed, even
though its histogram is centered.
• You may not be able to achieve an optimum
histogram configuration due to the limitations of EV
shift.
• Use of the flash as well as certain shooting
conditions can cause the histogram to indicate
exposure that is different from the actual exposure of
the image when it was recorded.
The following are the settings you can configure before
recording an image using a REC mode.
• L/R key setting
• Grid on/off
• Image Review on/off
• Icon Help on/off
• Power on default settings
• ISO sensitivity
• Metering
• Sharpness
• Saturation
• Contrast
• Resetting the camera
• The RGB (color component) histogram is displayed
for snapshots only. In the following modes, only the
luminance distribution histogram appears on the
monitor screen.
Movie mode, Short Movie mode, Past Movie mode,
MOVIE BEST SHOT mode
Download from Www.Somanuals.com. All Manuals Search And Download.
119
OTHER RECORDING FUNCTIONS
NOTE
Assigning Functions to the [̇] and [̈]
• You can also configure the settings listed below. See
the referenced pages for more information.
— AF Area (page 77)
— Quick Shutter (page 76)
— Audio Snap (page 152)
Keys
A “key customization” feature lets you configure the [̇]
and [̈] keys so they change camera settings whenever
they are pressed in a REC mode. After you configure the
[̇] and [̈] keys, you can change the setting assigned to
them without going through the menu screen.
— Digital Zoom (page 63)
— Size (page 71)
— Quality (Snapshots) (page 72)
— Quality (Movies) (page 104)
— White Balance (page 84)
— Flash Intensity (page 66)
— Flash Assist (page 67)
1. In a REC mode, press [MENU].
2. Select the “REC” tab, select “L/R Key”, and
then press [̈].
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
• After you assign a function, you can change its
setting simply by pressing the [̇] and [̈] keys.
— EV Shift (page 83)
— White Balance (page 84)
— ISO (page 125)
— Metering (page 126)
— Self-timer (page 69)
— Off: No function assigned
Download from Www.Somanuals.com. All Manuals Search And Download.
120
OTHER RECORDING FUNCTIONS
Turning the On-screen Grid On and Off
Turning Image Review On and Off
You can display gridlines on the monitor screen to help you
compose images and ensure that the camera is straight
when recording.
Image review displays the images you record on the
monitor screen as soon as you record them. Use the
following procedure to turn image review on and off.
1. In a REC mode, press [MENU].
2. Select the “REC” tab, select “Review”, and
then press [̈].
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
1. In a REC mode, press [MENU].
To do this:
Select this setting:
On
Display images on the monitor
screen for about one second
immediately after they are recorded
2. Select the “REC” tab, select “Grid”, and then
press [̈].
Do not display images immediately
after they are recorded
Off
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
To do this:
Select this setting:
Display the grid
Hide the grid
On
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
121
OTHER RECORDING FUNCTIONS
3. Use [̆] and [̄] to select the setting you
Using Icon Help
Icon Help displays guidance text about an icon when you
select it on the monitor screen while in a REC mode (page
27).
• Icon Help text is displayed for the following functions:
— Flash mode, focus mode, white balance, self-timer,
metering.
want, and then press [SET].
To do this:
Select this setting:
Display guidance text when you
select an icon on the monitor screen.
On
Off
Turn off Icon Help
— EX menu screen (page 129) image size, white
balance, AF area.
IMPORTANT!
Note, however, that metering, self-timer and white
balance icon help text appears only when “Metering”,
“Self-timer” or “White Balance” is assigned to the [̇] and
[̈] keys with the key customization feature (page 120).
• Selecting one of the following settings causes the
icon and its Icon Help text to appear momentarily on
the monitor screen. The icon and text disappear after
a short while.
— Flash mode “
— Focus mode “
— White balance “
Auto Flash” icon (page 64)
Auto Focus” icon (page 74)
1. In a REC mode, press [MENU].
Auto WB” icon (page 84)
AWB
2. Select the “REC” tab, select “Icon Help”, and
then press [̈].
Download from Www.Somanuals.com. All Manuals Search And Download.
122
OTHER RECORDING FUNCTIONS
Function
Flash
Focus*1
On
Off
Specifying Power On Default Settings
Auto
Auto
Auto
Auto
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the flash mode,
focus mode, white balance mode, ISO sensitivity, AF Area,
metering, self-timer, flash intensity, digital zoom mode,
manual focus position and zoom position. Turning on mode
memory for a mode tells the camera to remember the
status of that mode when you turn off the camera, and
restore it the next time you turn the camera back on. When
mode memory is turned off, the camera automatically
restores the initial factory default setting for the applicable
mode.
White Balance
ISO
AF Area
Spot
Metering
Multi
Off
0
Setting when
camera is
turned off
Self-timer
Flash Intensity
Digital Zoom
On
Last Auto Focus
position that was in
effect before you
switched to manual
focus
— The following table shows what happens when you turn
mode memory on or off for each mode.
MF Position
Zoom Position*2
Wide
*1 The focus mode setting is not remembered for the
Movie mode. PF (Pan Focus) is automatically
selected in the Movie mode.
*2 Only the optical zoom position is remembered.
Download from Www.Somanuals.com. All Manuals Search And Download.
123
OTHER RECORDING FUNCTIONS
IMPORTANT!
1. In a REC mode, press [MENU].
• Note that BEST SHOT mode settings take priority
over mode memory settings. If you turn the camera
off while in the BEST SHOT mode, all settings
except for “Zoom Position” will be configured
according to the BEST SHOT sample scene when
you turn it back on again, regardless of mode
memory on/off settings.
2. Select the “REC” tab, select “Memory”, and
then press [̈].
3. Use [̆] and [̄] to select the item you want to
change, and then press [̈].
• In the following modes, “
selected as the flash mode regardless of mode
memory on/off setting.
” (Flash Off) is always
4. Use [̆] and [̄] to select the setting you
want, and then press [SET].
Movie mode, Short Movie mode, Past Movie mode,
MOVIE BEST SHOT mode
To do this:
Select this setting:
On
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
124
OTHER RECORDING FUNCTIONS
IMPORTANT!
Specifying ISO Sensitivity
• Under certain conditions, a high shutter speed in
combination with a high ISO sensitivity setting can
cause digital noise (graininess), which makes an
image appear rough. For clean, good-quality images,
use the lowest ISO sensitivity setting possible.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.
You can change the ISO sensitivity setting for better
images in places where lighting is dim or when you are
using faster shutter speeds.
• ISO sensitivity is expressed in terms of values that
originally indicated the sensitivity to light for photographic
film. A larger value indicates higher sensitivity, which is
better for recording when available lighting is dim.
• “Auto” ISO sensitivity always is used in the following
cases, regardless of the current ISO sensitivity
setting.
1. In a REC mode, press [MENU].
2. Select the “Quality” tab, select “ISO”, and
then press [̈].
Movie mode, Short Movie mode, Past Movie mode,
MOVIE BEST SHOT mode
3. Use [̆] and [̄] to select the setting you want
NOTE
and then press [SET].
• You can use the key customization feature (page
120) to configure the camera so the ISO sensitivity
setting changes whenever you press [̇] and [̈]
while in a REC mode.
To get this:
Select this setting:
Auto
Automatic sensitivity selection
Lower sensitivity
ISO 50
ISO 100
ISO 200
Higher sensitivity
ISO 400
Download from Www.Somanuals.com. All Manuals Search And Download.
125
OTHER RECORDING FUNCTIONS
Center Weighted
Selecting the Metering Mode
Center weighted metering measures
light concentrating on the center of the
focus area. Use this metering method
when you want to exert some control
over exposure, without leaving settings
totally up to the camera.
The metering mode determines what part of the subject is
metered for exposure. You can use the following procedure
to change the camera’s metering mode.
1. In a REC mode, press [MENU].
Spot
2. Select the “Quality” tab, select “Metering”,
and then press [̈].
Spot metering takes readings at a very
small area. Use this metering method
when you want exposure to be set
according to the brightness of a
particular subject, without it being
affected by surrounding conditions.
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
Multi (Multi pattern)
Multi (Multi pattern) metering divides the
image into sections and measures the
light in each section for a balanced
exposure reading. The camera
automatically determines shooting
conditions according to the measured
lighting pattern, and makes exposure
settings accordingly. This type of
metering provides error-free exposure
settings for a wide range of shooting
conditions.
IMPORTANT!
• When “Multi” is selected as the metering mode,
certain procedures cause the metering mode setting
to change automatically as described below.
• Changing the exposure compensation setting (page
83) to a value other than 0.0 changes the metering
mode setting to “Center Weighted.” The metering
mode changes back to “Multi” when you return the
exposure compensation setting to 0.0.
Download from Www.Somanuals.com. All Manuals Search And Download.
126
OTHER RECORDING FUNCTIONS
Specifying Outline Sharpness
Specifying Color Saturation
Use the following procedure to control the sharpness of
image outlines.
Use the following procedure to control the intensity of the
image you are recording.
1. In a REC mode, press [MENU].
1. In a REC mode, press [MENU].
2. Select the “Quality” tab, select “Sharpness”,
and then press [̈].
2. Select the “Quality” tab, select “Saturation”,
and then press [̈].
3. Use [̆] and [̄] to select the setting you
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
want, and then press [SET].
To get this:
Select this setting:
To get this:
Select this setting:
High sharpness
+2
+1
0
High color saturation (intensity)
+2
+1
0
Normal sharpness
Low sharpness
Normal color saturation (intensity)
Low color saturation (intensity)
–1
–2
–1
–2
Download from Www.Somanuals.com. All Manuals Search And Download.
127
OTHER RECORDING FUNCTIONS
Specifying Contrast
Resetting the Camera
Use this procedure to adjust the relative difference
between the light areas and dark areas of the image you
are recording.
Use the following procedure to reset all of the camera’s
settings to their initial defaults as shown under “Menu
Reference” on page 231.
1. In a REC mode, press [MENU].
1. Press [MENU].
2. Select the “Quality” tab, select “Contrast”,
and then press [̈].
2. Select the “Set Up” tab, select “Reset”, and
then press [̈].
3. Use [̆] and [̄] to select the setting you
3. Use [̆] and [̄] to select “Reset”, and then
want, and then press [SET].
press [SET].
• To cancel the procedure without resetting, select
“Cancel” and press [SET].
To get this:
Select this setting:
High contrast
+2
+1
0
Normal contrast
Low contrast
–1
–2
Download from Www.Somanuals.com. All Manuals Search And Download.
128
OTHER RECORDING FUNCTIONS
NOTE
Using the Shortcut Menu (EX Menu)
• The following are the meanings of each of the image
size indicators that appear on the EX menu.
Pressing [EX] displays a shortcut menu that you can use to
configure image size, white balance, ISO sensitivity, and
AF area settings.
×
7M
: 3072 2304 pixels
×
7M(3:2) : 3072 2048 (3:2) pixels
×
5M
3M
2M
: 2560 1920 pixels
×
: 2048 1536 pixels
1. In a REC mode, press
[EX].
×
: 1600 1200 pixels
×
VGA
:
640
480 pixels
2. Use [̇] and [̈] to select the item you want,
and then use [̆] and [̄] to scroll through the
available settings.
• Refer to the following pages for details about each of
the settings.
— Specifying Image Size (page 71)
— Adjusting the White Balance (page 84)
— Specifying ISO Sensitivity (page 125)
— Specifying the Auto Focus Area (page 77)
3. After configuring the settings you want, press
[SET] to exit the shortcut menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
129
PLAYBACK
You can use the camera’s built-in monitor screen to view
images after you record them.
2. Use [̈] (forward) or [̇] (back) to scroll
through files on the monitor screen.
Basic Playback Operation
Use the following procedure to scroll through files stored in
the camera’s memory.
NOTE
[
]
1. Press [ ] (PLAY) to
turn on the camera.
• Holding down [̇] or [̈] scrolls images at high
speed.
• In order to allow for faster playback image scrolling,
the image that initially appears on the monitor screen
is a preview image, which is of somewhat lower
quality than the actual display image. The actual
display image appears a short while after the preview
image. This does not apply to images copied from
another digital camera.
• This enters the PLAY
mode and causes an
image or a message to
appear on the monitor
screen.
PLAY mode file type Folder name/ File name
Image quality
Image size
Date and time
Download from Www.Somanuals.com. All Manuals Search And Download.
130
PLAYBACK
IMPORTANT!
Playing an Audio Snapshot
• Audio volume can be adjusted only when playback is
being performed or is paused.
Perform the steps below to display an audio snapshot
(indicated by
) and play its audio.
1. In the PLAY mode, use [̇] and [̈] until the
image you want is displayed.
2. Press [SET].
• This plays back the
audio that accompanies
the displayed image.
• You can perform the
following operations
while audio is playing.
To do this:
Do this:
Fast forward or fast reverse
the audio
Hold down [̇] or [̈].
Pause and unpause audio
playback
Press [SET].
Press [̆] or [̄].
Adjust audio volume
Cancel playback
Press [MENU].
Download from Www.Somanuals.com. All Manuals Search And Download.
131
B
PLAYBACK
3. Use [̆], [̄], [̇], and [̈] to shift the image
Zooming the Display Image
up, down, left, or right.
Perform the following procedure to zoom the image
currently on the monitor screen up to eight times its normal
size.
4. Press [MENU] to return the image to its
original size.
1. In the PLAY mode, use [̇] and [̈] to display
IMPORTANT!
the image you want.
• Depending on the original size of the recorded
image, you may not be able to zoom a display image
the full eight times normal size.
Current zoom factor
2. Shift the zoom
controller towards
Original image
to enlarge the image.
• This zooms the image.
• An indicator appears in
the lower right corner,
that shows what part of
the original image is
currently displayed on
the monitor screen.
Displayed part
• You can toggle display
of the zoom factor on
and off by pressing
[DISP].
Download from Www.Somanuals.com. All Manuals Search And Download.
132
PLAYBACK
3. Use [̇] and [̈] to scroll through images and
Resizing an Image
display the one you want to resize.
You can resize a recorded image to either of the three
following sizes.
4. Use [̆] and [̄] to select the setting you
×
• 2560 1920 pixels: Best for prints in A3-size and smaller
want, and then press [SET].
paper
• To cancel the resize operation, select “Cancel”.
×
• 2048 1536 pixels: Best for prints in A4-size and smaller
paper
×
• 640 480 pixels (VGA): Best for attachment to e-mail
IMPORTANT!
messages or incorporation into Web pages
• Resizing an image creates a new file that contains
the image in the size you select. The file with the
original image also remains in memory.
• Note that you cannot resize the following types of
images.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY”
tab, select “Resize”,
and then press [̈].
×
— 640 480 pixel and smaller images
— Movie images and the voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
• The resize operation cannot be performed when
there is not enough memory to store the resized
image.
• Note that this operation is
possible only when a
snapshot image is on the
monitor screen.
• When you display a resized image on the camera’s
monitor screen, the date and time that appear when
the image is displayed indicate when the image was
originally recorded, not when the image was resized.
Download from Www.Somanuals.com. All Manuals Search And Download.
133
PLAYBACK
4. Move the zoom controller left and right to
zoom the image.
Cropping an Image
You can use the following procedure to crop a portion of an
enlarged image.
• The part of the image displayed on the monitor
screen is the cropped part.
5. Use [̆], [̄], [̇], and [̈] to to scroll the part
1. In the PLAY mode, use [̇] and [̈] to scroll
through images and display the one you want
to crop.
to be cropped up, down, left, and right.
6. Press [SET] to extract the part of the image
enclosed in the cropping boundary.
2. Press [MENU].
• If you want to cancel the procedure at any point,
press [MENU].
Current zoom factor
3. Select the “PLAY”
tab, select
Original image
“Trimming”, and then
press [̈].
• An indicator appears in
the lower right corner,
that shows what part of
the original image is
currently displayed on
the monitor screen.
Displayed part
• Note that this operation
is possible only when a
snapshot image is on
the monitor screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
PLAYBACK
IMPORTANT!
Playing and Editing a Movie
Playing a Movie
• Cropping an image creates a new file that contains
the cropped image. The file with the original image
also remains in memory.
Use the following procedure to play a movie you recorded
with this camera.
• Note that you cannot crop the following types of
images.
— Movie images and the voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
• The cropping operation cannot be performed when
there is not enough memory to store the cropped
image.
• When you display a cropped image on the camera’s
monitor screen, the date and time that appear when
the image is displayed indicate when the image was
originally recorded, not when the image was
cropped.
Elapsed recording time
1. In the PLAY mode,
use [̇] and [̈] to
scroll through movies
on the monitor screen
and display the one
you want.
Movie icon
Image quality
2. Press [SET].
• This starts playback of the movie.
• You can perform the following operations while a
movie is playing.
Download from Www.Somanuals.com. All Manuals Search And Download.
135
PLAYBACK
To do this:
Do this:
Editing a Movie
Use the procedure in this section to edit and delete movies.
Editing operations let you cut everything before or after a
specific frame, or to cut everything between two frames.
Fast forward or fast reverse
playback
• Each press increases the speed
one more step.
Press [̇] or [̈].
Return fast forward or fast
reverse movie playback to normal Press [SET].
speed
IMPORTANT!
• Cut operations cannot be undone. Make sure you
really want to cut the part of the movie you are
specifying before executing the cut operation.
• A movie that is shorter than five seconds cannot be
edited.
Pause movie playback
Press [SET].
Scroll paused playback one
frame
Press [̇] or [̈].
Stop movie playback
Press [MENU].
• The cut operation can take considerable time. This is
normal and does not indicate malfunction.
• You will not be able to perform the cut operation if
the amount of memory available is less than the size
of the movie file you are cutting. If this happens,
delete any files you no longer need to free up more
memory.
• Splicing of two different movies into a single movie or
cutting one movie into multiple parts are not
supported by camera operations. However, you can
splice movies and cut movies into multiple parts on
your computer using the bundled Ulead Movie
Wizard SE VCD application.
Adjust the movie audio volume
level
Press [̆] or [̄].
Toggle monitor screen indicators
on and off
Press [DISP].
Move the zoom controller
Zoom the movie image
towards
.
Scroll a zoomed movie image on
the monitor screen
Use [̆], [̄], [̇], [̈].
IMPORTANT!
• You can adjust the volume level of movie audio
during movie playback only.
Download from Www.Somanuals.com. All Manuals Search And Download.
136
B
PLAYBACK
4. Display the frame where you want the cut to
be located.
I To cut everything before or after a specific
frame
To do this:
Do this:
1. While the movie you
are editing is playing,
press [SET].
Fast forward or fast reverse
playback
Press [̇] or [̈].
Pause or unpause movie
playback
Press [SET].
• This will pause movie
playback.
Scroll paused playback one
frame
Press [̇] or [̈].
Cancel the cut operation
Press [MENU].
2. Press [̄].
• The red portion of the
indicator bar shows
what part will be cut.
• You can also display the same screen while in the
PLAY mode, by pressing [MENU], selecting the
“PLAY” tab, selecting “Movie Editing”, and then
pressing [̈].
3. Use [̆] and [̄] to select the operation you
want to perform.
To do this:
Select this setting:
Cut
Cut everything before a
specific frame
Cut everything after a specific
frame
Cut
Exit the cut mode
Cancel
Download from Www.Somanuals.com. All Manuals Search And Download.
137
PLAYBACK
5. When the frame you
want is displayed,
press [̄].
I To cut everything between two specific
frames
1. While the movie is
playing, press [SET].
• This will pause movie
playback.
6. Use [̆] and [̄] to select “Yes,” and then
press [SET].
2. Press [̄].
• The message “Busy.... Please wait...” will remain on
the display as the cut operation is performed. Cutting
is complete when the message disappears.
• You can also display the same screen while in the
PLAY mode, by pressing [MENU], selecting the
“PLAY” tab, selecting “Movie Editing”, and then
pressing [̈].
• Select “No” to exit the cut mode.
3. Use [̆] and [̄] to select “
Cut”, and
then press [SET].
• Select “Cancel” to exit the cut mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
138
PLAYBACK
4. Display the starting frame where you want the
first cut to be located.
6. Repeat step 4 to
display the ending
frame where you want
the second cut to be
located.
To do this:
Do this:
Fast forward or fast reverse
playback
Press [̇] or [̈].
• The red portion of the
indicator bar shows what
part will be cut.
Pause or unpause movie
playback
Press [SET].
Scroll paused playback one
frame
Press [̇] or [̈].
7. Use [̆] and [̄] to select “Yes”, and then
Cancel the cut operation
Press [MENU].
press [SET].
• The message “Busy.... Please wait...” will remain on
the display as the cut operation is performed. Cutting
is complete when the message disappears.
5. When the frame you
want is displayed,
press [̄].
• Select “No” to exit the cut mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
139
PLAYBACK
I To capture a still image from a movie
Capturing a Still Image from a Movie
(MOTION PRINT)
The MOTION PRINT feature lets you capture a frame from
an existing movie and create a still image that is suitable
for printing. There are two layouts you can use when
capturing an image, and the layout you select determines
the final image size.
1. In the PLAY mode, use [̇] and [̈] to scroll
through movies on the monitor screen and
display the one that contains the frames you
want.
2. Press [MENU].
×
• 9 frames (1600 1200-pixel
final image size)
3. Select the “PLAY” tab, select “MOTION
PRINT”, and then press [̈].
4. Use [̆] and [̄] to
select the layout (“1
frame” or “9 frames”)
you want to use.
Background images
Selected main image
• Select “Cancel” to exit
the MOTION PRINT
mode.
×
• 1 frame (640 480-pixel final
data size)
Selected main image
Download from Www.Somanuals.com. All Manuals Search And Download.
140
PLAYBACK
5. Use [̇] and [̈] to display the frame that you
Adjusting White Balance of a Recorded
Image
You can use the white balance setting to select a light
source type for a recorded image, which will affect the
colors of the image.
want to use as the main image.
• Holding down either button scrolls at high speed.
6. After selecting the
frame you want, press
[SET].
1. In the PLAY mode, use [̇] and [̈] to display
the image whose white balance setting you
want to change.
• This displays the
resulting still image.
• If you selected “9
frames” for the layout,
the frame you selected
in step 4 will be the
main image, and the
frames on either side of
it will be used as the
background frames.
2. Press [MENU].
3. Select the “PLAY”
tab, select “White
Balance”, and then
press [̈].
• Note that the above
step is possible only
when there is a
• If you selected “1 frame” in step 4, an image of the
frame you selected in step 6 appears here.
snapshot displayed on
the monitor screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
141
PLAYBACK
• Normally, the initially selected white balance setting
on the above menu is the one that was used when
you originally recorded the image. If you used the
“Auto” or “Manual” white balance setting when you
recorded the image, “Cancel” will be selected (page
84).
4. Use [̆] and [̄] to select a white balance
setting, and then press [SET] to apply it.
When you want the image to
appear like it was recorded
under these conditions:
Select this setting:
Outdoors, fair weather
• If you select the same white balance setting as the
one you selected when you originally recorded the
image, pressing [SET] will exit the white balance
adjustment menu without changing the image.
Outdoors, cloudy to rain, in
tree shade, etc.
Under very high temperatures
light, such as building shade,
etc.
Under white or daylight white
fluorescent lighting, without
suppressing color cast
1
2
Under daylight fluorescent
lighting, while suppressing
color cast
Under incandescent lighting,
while suppressing color cast
Cancel white balance
adjustment
Cancel
Download from Www.Somanuals.com. All Manuals Search And Download.
142
PLAYBACK
IMPORTANT!
Adjusting Image Brightness
• Adjusting the white balance of an image creates a
new image with the new white balance setting. The
original image also remains in memory.
• The white balance of the following types of images
cannot be adjusted.
— Movie images and voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
• You cannot adjust white balance when there is not
enough free memory available to save the resulting
image.
• When you display an image whose white balance
has been adjusted on the camera’s monitor screen,
the date and time indicates when the image was
originally recorded, not when the white balance was
adjusted.
Use the following procedure to adjust the brightness of
snapshots.
1. In the PLAY mode, use [̇] and [̈] to scroll
through images and display the one whose
brightness you want to adjust.
2. Press [MENU].
3. Select the “PLAY” tab,
select “Brightness”,
and then press [̈].
• Note that the above step
is possible only when
there is a snapshot
displayed on the monitor
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
143
PLAYBACK
IMPORTANT!
4. Use [̆] and [̄] to select the setting you
want, and then press [SET].
• Adjusting the brightness of an image creates a new
image with the new brightness level. The original
image also remains in memory.
• The brightness of the following types of images
cannot be adjusted.
— Movie images and voice recording file icon
— Images created with MOTION PRINT
— Images recorded with another camera
— You cannot adjust brightness when there is not
enough free memory available to save the
resulting image.
To get this:
Brighter
Select this setting:
+2
+1
0
–1
–2
Darker
• To cancel the brightness adjustment operation, press
• When you display a brightness adjusted image on
the camera’s monitor screen, the date and time
indicates when the image was originally recorded,
not when the brightness was adjusted.
[̇] or [MENU].
Download from Www.Somanuals.com. All Manuals Search And Download.
144
PLAYBACK
Selection boundary
2. Use [̆], [̄], [̇], and
[̈] to move the
Displaying the 9-image View
The following procedure displays nine images on the
monitor screen at the same time.
selection boundary to
the image you want.
Pressing [̈] while the
selection boundary is
in the right column or
[̇] while it is in the left
column scrolls to the
next full screen of nine
images.
1. In the PLAY mode, shift the zoom controller
towards ( ).
• This displays the 9-image screen with the image that
was on the monitor screen in step 2 in the center,
with a selection boundary around it.
• If there are fewer than nine images in memory, they
are displayed starting from the upper left corner. The
selection boundary is located at the image that was
on the display before you switched to the 9-image
view.
Example: When there are 20 images in memory, and
Image 1 is displayed first
17 18 19
6
9
7
8
15 16 17
18 19 20
• On the 9-image screen,
recording file (page 154).
indicates a voice
20
3
1
4
2
5
10 11
12 13 14
1
2
3
3. Pressing any button besides [̆], [̄], [̇], or
[̈] displays the full-size version of the image
where the selection boundary is located.
Download from Www.Somanuals.com. All Manuals Search And Download.
145
PLAYBACK
2. Use [̆], [̄], [̇], and [̈] to move the
selection boundary to the date you want, and
then press [SET].
Displaying the Calendar Screen
Use the following procedure to display a 1-month calendar.
Each day shows the first file recorded on that day, which
makes it easy to find the file you want.
• This displays an image of the first file that was
recorded on the selected date.
1. In the PLAY mode,
press [̆] (
).
• Use the procedure
under “Changing the
Date Format” on page
171 to specify the date
format.
• The file displayed on
the calendar for each
date is the first file that
was recorded on that
date.
Year/Month
Date selection cursor
• To exit the calendar screen, press [MENU] or [DISP].
• On the calendar screen,
recording file (page 154).
indicates a voice
•
appears in place of the image when the date
contains data that cannot be displayed by this
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
PLAYBACK
3. Use the screen that appears to configure the
image, time, interval, and effect settings.
Playing a Slideshow
A slideshow automatically plays back images in sequence
at a fixed interval.
• All Images
Displays all images in camera memory.
•
•
OnIy
This icon appears only in the case of
snapshots and audio snapshots.
OnIy
Images
This icon appears only in the case of movies.
• One Image
Displays a particular image.
• Favorites
1. In the PLAY mode, press [MENU].
Displays all images in the FAVORITE folder.
2. Select the “PLAY” tab, select “Slideshow”,
and then press [̈].
Use [̇] and [̈] to specify the playback time you
want (1 to 5 minutes, or 10, 15, 30, or 60
minutes).
Time
Use [̇] and [̈] to specify the interval you want
(MAX, or 1 to 30 seconds).
Interval
• When playback reaches a movie file while
“MAX” is selected as the interval, only the first
frame of the movie is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
147
PLAYBACK
IMPORTANT!
• Pattern 1, 2, 3
Applies a preset effect when transitioning from
one image to another.
• Random
Randomly applies the preset patterns (1, 2,
and 3).
• OFF
• Note that all buttons are disabled while an image
change is in progress. Wait until an image is stopped
on the monitor screen before performing a button
operation, or hold down the button until the image
stops.
Effect
• Pressing [̇] during a slideshow will scroll to the
previous image, while [̈] scrolls to the next image.
• When the slideshow comes to a movie file, it plays
the movie and its audio once.
• When the slideshow comes to a voice recording file
or an audio snapshot, it plays the audio once.
• The audio of movies, audio snapshots, and voice
recording files is not played when “MAX” is specified
for the slideshow “Interval” setting. With all other
“Interval” settings, movies and all audio (movies,
audio snapshots, voice recording files) are played
back, regardless of their length.
Effects turned off.
4. Use [̆] and [̄] to select “Start”, and then
press [SET].
• This starts the slideshow.
5. To stop the slideshow, press [SET].
• The slideshow will also stop automatically after the
amount of time you specified for “Time” elapses.
• While audio is playing, you can use [̆] and [̄] to
adjust the volume level.
Download from Www.Somanuals.com. All Manuals Search And Download.
148
PLAYBACK
• Note that effect settings are disabled when the
Using the Photo Stand Feature
slideshow “Images” setting is “Favorites”, or when
the slideshow “Interval” setting is “MAX”, “1 sec”, or
“2 sec”.
• Images copied from another digital camera or a
computer may take longer time to appear than the
slideshow interval time you specify.
• If there are indicators on the display, you can clear
them by pressing [DISP] (page 30).
• When the slideshow reaches a movie while “One
Image” is selected for “Images”, the movie will repeat
playback for the time specified by for “Time”.
The “Photo Stand” feature lets you specify what should
appear on the camera’s monitor screen while the camera is
on its USB cradle. You can play a Photo Stand slideshow
without worrying about remaining battery power, or you can
specify display of a particular image. Photo Stand feature
operations are performed in accordance with slideshow
setting. See page 147 for information about configuring
slideshow settings to suit your needs.
1. Turn off the camera.
2. Set the camera onto the USB cradle.
3. Press the USB
cradle’s [PHOTO]
button.
• This starts the Photo
Stand slideshow with
the images or image
you specified.
[PHOTO]
Download from Www.Somanuals.com. All Manuals Search And Download.
149
PLAYBACK
• Pressing [MENU] displays a screen for configuring
slideshow settings. To restart the slideshow, press
[MENU] while the menu screen is displayed, or
select “Start” and then press [SET].
Rotating the Display Image
Use the following procedure to rotate the image 90 degrees
and register the rotation information along with the image.
After you do this, the image is always displayed in its
rotated orientation.
• While audio is playing, you can use [̆] and [̄] to
adjust the volume level.
4. To stop the Phot Stand slideshow, press
[PHOTO] again.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Rotation”, and
then press [̈].
IMPORTANT!
• The battery is not charged while a Photo Stand
slideshow is in progress. To charge the battery, stop
the slideshow.
• Note that this operation is possible only when a
snapshot image is on the monitor screen.
3. Use [̇] and [̈] to scroll through images until
the one you want to rotate is on the monitor
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
150
PLAYBACK
IMPORTANT!
4. Use [̆] and [̄] to
select “Rotate”, and
then press [SET].
• You cannot rotate an image that is protected. To
rotate such an image, first unprotect it.
• You may not be able to rotate a digital image that
was recorded with another type of digital camera.
• You cannot rotate the following types of images.
— Movie images and the voice recording file icon
— Images created with MOTION PRINT
• Image rotation is supported for single image only.
You cannot rotate a 9-image screen or an image on
the calendar screen.
• Each press of [SET]
rotates the image 90
degrees.
5. After you are finished configuring settings,
press [MENU] to exit the setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
151
PLAYBACK
1. In the PLAY mode, use [̇] and [̈] to scroll
through snapshots until the one to which you
want to add audio is displayed.
Adding Audio to a Snapshot
The “after-recording” feature lets you add audio to
snapshots after they are recorded. You can also re-record
the audio of an audio snapshot (one with a
icon on it).
2. Press [MENU].
• Audio Format: WAVE/ADPCM recording format
This is the Windows standard format for audio recording.
The file extension of a WAVE/ADPCM file is “.WAV”.
3. Select the “PLAY”
tab, select “Dubbing”,
and then press [̈].
• Recording Time:
Up to about 30 seconds per image
• Audio File Size:
Approximately 165KB (30-second recording of
approximately 5.5KB per second)
4. Press the shutter button to start audio
recording.
5. Recording stops after about 30 seconds or
when you press the shutter button.
Download from Www.Somanuals.com. All Manuals Search And Download.
152
PLAYBACK
IMPORTANT!
To re-record audio
• Take care that you do
not block the
microphone with your
fingers.
• Good recording results
are not possible when
the camera is too far
from the subject.
1. In the PLAY mode, use [̇] and [̈] to scroll
through snapshots until the one whose audio
you want to re-record is displayed.
2. Press [MENU].
3. Select the “PLAY” tab, select “Dubbing”, and
then press [̈].
• The
(Audio) icon
Microphone
appears on the monitor
screen after audio
recording is complete.
• You will not be able to record audio when remaining
memory capacity is low.
• You cannot add audio to the following types of
images.
— Movie images and the voice recording file icon
— Images created with MOTION PRINT
— Protected snapshot (page 161)
• Audio that is re-recorded or deleted cannot be
recovered. Make sure you no longer need audio
before re-recording or deleting it.
4. Use [̆] and [̄] to select “Delete”, and then
press [SET].
• If you merely want to delete the audio without re-
recording, press [MENU] here to complete the
procedure.
5. Press the shutter button to start audio
recording.
6. Recording stops after about 30 seconds or
when you press the shutter button.
• This deletes the existing audio and replaces it with
the new one.
Download from Www.Somanuals.com. All Manuals Search And Download.
153
PLAYBACK
IMPORTANT!
Playing Back a Voice Recording File
• Audio volume can be adjusted only when playback is
being performed or is paused.
Perform the following steps to play back a voice recording
file.
• If your recording has index marks (page 116) inside
it, you can jump to the index mark before or after the
current playback location by pausing playback and
then pressing [̇] or [̈]. Next, press [SET] to
resume playback from the index mark position.
1. In the PLAY mode, use [̇] and [̈] to display
the voice recording file (a file with
you want to play.
on it)
2. Press [SET].
• This starts playback of
the voice recording file
through the camera’s
speaker.
• You can perform the
following operations
while audio is playing.
To do this:
Do this:
Fast forward or fast reverse
the audio
Hold down [̇] or [̈].
Pause and unpause audio
playback
Press [SET].
Adjust audio volume
Cancel playback
Press [̆] or [̄].
Press [MENU].
Download from Www.Somanuals.com. All Manuals Search And Download.
154
B
PLAYBACK
Displaying Camera Images on a TV Screen
AV cable
You can display recorded images on a TV screen. To
display camera images on a TV, you need a television
equipped with a video input terminal, USB cradle, and the
AV cable that comes with the camera.
TV
1. Connect one end of the AV cable that comes
with the camera to the [AV OUT] port of the
USB cradle, and the other end to the video
input terminal of the TV.
[AV OUT] (AV output port)
Video input terminal
• Connect the yellow plug of the AV cable to the video
input (yellow) terminal of the TV, and the white plug
to the TV’s audio input (white) terminal.
2. Turn off the camera.
3. Set the camera onto the USB cradle.
4. Turn on the TV and select its video input
mode.
5. Now when you perform an image display
operation on the camera, the image will
appear on the TV screen instead of the
camera’s monitor screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
155
PLAYBACK
IMPORTANT!
Selecting the Video Output System
You can select either NTSC or PAL for the video output
system to match the system of the TV you are using.
• All icons and indicators that appear on the monitor
screen also appear on the TV screen.
• Note that the audio output is monaural.
• The camera’s monitor screen will go blank during
video output.
• Pressing the USB cradle’s [PHOTO] button will
activate the Photo Stand feature (page 149) and
display images on the TV screen.
• Depending on the size of the TV screen, recorded
images may not fill the entire screen.
1. In a REC mode or the PLAY mode, press
[MENU].
2. Select the “Set Up” tab, select “Video Out”,
and then press [̈].
• For video output, the audio volume level is initially
set to maximum. Perform volume level adjustment
using TV controls.
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
• After using an optionally available AV cable (EMC-
2A) to connect the camera’s USB cradle connector
directly to the AUDIO IN terminal of a TV, you can
view recorded images on the TV and even use the
TV screen to compose images before recording
them.
If you are using a TV designed
Select this setting:
for use in this area:
U.S., Japan, and other areas
that use the NTSC system
NTSC
Europe and other areas that
use the PAL system
PAL
Download from Www.Somanuals.com. All Manuals Search And Download.
156
B
PLAYBACK
IMPORTANT!
• Images will not display properly if you select the
wrong video output system.
• This camera supports the NTSC and PAL video input
systems only. Images will not display properly if you
use a TV (monitor) that is designed for a different
video input system.
Download from Www.Somanuals.com. All Manuals Search And Download.
157
B
DELETING FILES
You can delete a single file, or you can delete all files
currently in memory.
Deleting a Single File
1. In the PLAY mode,
IMPORTANT!
press [̄] (
).
• Note that file deletion cannot be undone. Once you
delete a file, it is gone. Make sure you really do not
need a file anymore before you delete it. Especially
when deleting all files, make sure you check all the
files you have stored before proceeding.
• A protected file cannot be deleted. To delete a
protected file, unprotect it first (page 161).
• Delete cannot be performed when all files in memory
are protected (page 162).
2. Use [̇] and [̈] to scroll through files and
display the one you want to delete.
• Deleting an audio snapshot deletes both the image
file and the audio file attached to it.
• You cannot use the procedures in this section to
delete images from the FAVORITE folder. See the
procedures on page 165 for details about deleting
FAVORITE folder contents.
3. Use [̆] and [̄] to select “Delete”.
• To exit the file delete operation without deleting
anything, select “Cancel”.
4. Press [SET] to delete the file.
• Repeat steps 2 through 4 to delete other files, if you
want.
5. Press [MENU] to exit the menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
158
DELETING FILES
Deleting All Files
1. In the PLAY mode, press [̄] (
).
2. Use [̆] and [̄] to select “All Files Delete”,
and then press [SET].
3. Use [̆] and [̄] to select “Yes”.
• To exit the file delete operation without deleting
anything, select “No”.
4. Press [SET] to delete all the files.
• The message “There are no files.” appears on the
screen after all of the files are deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
159
FILE MANAGEMENT
The file management capabilities of the camera make it
easy to keep track of images. You can protect files against
deletion and store the files you want in the camera’s built-in
memory.
Each folder can hold files numbered up to 9,999.
Trying to store the 10,000th file in a folder causes the next
serially numbered folder to be created. File names are
generated as shown below.
Example: Name of the 26th file
Folders
CIMG0026.JPG
Your camera automatically creates folders in its built-in
flash memory or on the memory card.
Extension
Serial number (4 digits)
Memory Folders and Files
• The folder and file names described here appear when
you view folders and files on a computer. See page 29 for
information about how the camera displays folder and file
names.
• The actual number of files you will be able to store on a
memory card depends on image size and quality, card
capacity, etc.
An image you record is automatically stored in a folder,
whose name is a serial number. You can have up to 900
folders in memory at the same time. Folder names are
generated as shown below.
Example: Name of the 100th folder.
100CASIO
• For details about the folder structure, see “Memory Folder
Structure” on page 209.
Serial number (3 digits)
Download from Www.Somanuals.com. All Manuals Search And Download.
160
FILE MANAGEMENT
4. Use [̆] and [̄] to
select “On”, and then
press [SET].
Protecting Files
Once you protect a file it cannot be deleted (page 158).
You can protect files individually or you can protect all files
in memory with a single operation.
• A file that is protected is
indicated by the
mark.
To protect a single file
• To unprotect a file, select
“Off” in step 4, and then
press [SET].
1. In the PLAY mode, press [MENU].
5. Press [MENU] to exit the menu screen.
2. Select the “PLAY” tab,
select “Protect”, and
then press [̈].
3. Use [̇] and [̈] to scroll through files and
display the one you want to protect.
Download from Www.Somanuals.com. All Manuals Search And Download.
161
FILE MANAGEMENT
To protect all files in memory
Using the FAVORITE Folder
You can copy scenery shots, photos of your family, or other
special images from a file storage folder (page 209) to the
FAVORITE folder in built-in memory (page 209). Images in
the FAVORITE folder are not displayed during normal
playback, so it helps to keep your personal images private
as you carry them around. FAVORITE folder images are
not deleted when you change memory cards, so you can
always keep them on hand.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Protect”, and
then press [̈].
3. Use [̆] and [̄] to select “All Files : On”, and
then press [SET].
• To unprotect all files, press [SET] in step 3 so the
setting shows “All Files : Off”.
To copy a file to the FAVORITE folder
4. Press [MENU] to exit the menu screen.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab,
select “Favorites”, and
then press [̈].
Download from Www.Somanuals.com. All Manuals Search And Download.
162
FILE MANAGEMENT
NOTE
3. Use [̆] and [̄] to
select “Save”, and
then press [SET].
• Copying an image file with the above procedure
creates a 320 240-pixel QVGA-size image in the
FAVORITE folder.
×
• This displays the names
of the files in built-in
memory or on the loaded
memory card.
• A file copied into the FAVORITE folder is
automatically assigned a file name that is a serial
number. Though the serial number starts from 0001
and can go as high as 9999, the actual upper end of
the range depends on built-in memory capacity.
Remember that the maximum number of images that
can be stored in built-in memory depends on the size
of each image and other factors.
4. Use [̇] and [̈] to select the file you want to
copy to the FAVORITE folder.
5. Use [̆] and [̄] to select “Save”, and then
press [SET].
IMPORTANT!
• This copies the displayed file to the FAVORITE
folder.
• Note that an image that has been copied to the
FAVORITE folder and then resized cannot be
returned to its original size.
• Files in the FAVORITE folder cannot be copied to a
memory card.
6. After copying all of the files you want, use [̆]
and [̄] to select “Cancel”, and then press
[SET] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
163
FILE MANAGEMENT
IMPORTANT!
To display a file in the FAVORITE folder
• Note that a FAVORITE folder is created in the
camera’s built-in memory only. No FAVORITE folder
is created on a memory card when you use one. If
you want to view the contents of the FAVORITE
folder on your computer screen, you need to remove
the memory card from the camera (if you are using
one) before placing the camera onto the USB cradle
to start data communication (pages 179, 194).
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Favorites”, and
then press [̈].
3. Use [̆] and [̄] to select “Show”, and then
press [SET].
• If the FAVORITE folder is empty, the message “No
Favorites file!” appears.
File Name
4. Use [̈] (forward) and
[̇] (back) to scroll
through the files in the
FAVORITE folder.
FAVORITE folder icon
5. After you are finished viewing files, press
[MENU] twice to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
164
FILE MANAGEMENT
To delete a file from the FAVORITE
folder
To delete all files from the FAVORITE
folder
1. In the PLAY mode, press [MENU].
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab, select “Favorites”, and
then press [̈].
2. Select the “PLAY” tab, select “Favorites”, and
then press [̈].
3. Use [̆] and [̄] to select “Show”, and then
3. Use [̆] and [̄] to select “Show”, and then
press [SET].
press [SET].
4. Press [̄] (
).
4. Press [̄] (
).
5. Use [̇] and [̈] to select the file you want to
5. Use [̆] and [̄] to select “All Files Delete”,
delete from the FAVORITE folder.
and then press [SET].
6. Use [̆] and [̄] to select “Delete”, and then
IMPORTANT!
press [SET].
• You cannot use the delete operations on page 158 to
delete images from the FAVORITE folder.
Performing the memory format operation (page 175),
however, does delete FAVORITE folder files.
• To exit the file delete operation without deleting
anything, select “Cancel”.
7. After deleting all of the files you want, use [̆]
and [̄] to select “Cancel”, and then press
[SET] to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
165
OTHER SETTINGS
Changing the Brightness of the Monitor
Screen
You can use the following procedure to toggle the
brightness of the monitor screen between two levels.
Configuring Sound Settings
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or all
the way, or perform a key operation.
1. Press [MENU].
To configure sound settings
2. Select the “Set Up” tab, select “Screen”, and
then press [̈].
1. Press [MENU].
2. Select the “Set Up” tab, select “Sounds”, and
then press [̈].
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
3. Use [̆] and [̄] to select the sound whose
setting you want to configure, and then press
[̈].
To set this monitor screen
Select this setting:
brightness level:
Normal brightness
High brightness
Normal
Bright
4. Use [̆] and [̄] to change the setting, and
then press [SET].
To do this:
Select this setting:
Sound 1 through Sound 5
Off
Select a built-in sound
Turn off the sound
Download from Www.Somanuals.com. All Manuals Search And Download.
166
OTHER SETTINGS
To set the confirmation tone volume
level
To set the audio volume level for movie
and audio snapshot playback
1. Press [MENU].
1. Press [MENU].
2. Select the “Set Up” tab, select “Sounds”, and
then press [̈].
2. Select the “Set Up” tab, select “Sounds”, and
then press [̈].
3. Use [̆] and [̄] to select “
Operation”.
3. Use [̆] and [̄] to select “
Play”.
4. Use [̇] and [̈] to specify the volume setting
4. Use [̇] and [̈] to specify the playback
volume setting you want, and then press
[SET].
you want, and then press [SET].
• You can set the volume in the range of 0 (no sound)
to 7 (loudest).
• You can set the playback volume in the range of 0
(no sound) to 7 (loudest).
IMPORTANT!
• The volume setting you make here also affects the
video output volume level (page 155).
IMPORTANT!
• The volume setting you make here does not affect
the video output volume level (page 155).
Download from Www.Somanuals.com. All Manuals Search And Download.
167
OTHER SETTINGS
IMPORTANT!
Specifying an Image for the Startup Screen
• You can select any one of the following types of
image as the startup image.
— The camera’s built-in image
You can specify an image you recorded as the startup
screen image, which causes it to appear on the monitor
screen whenever you press the power button or [
]
— A snapshot
(REC) to turn on the camera. The startup screen image
— The image only of an audio snapshot
— A movie whose file size is less than the amount of
unused built-in memory still available
• Only one image can be stored in startup image
memory at one time. Selecting a new startup image
overwrites anything that is already stored in startup
image memory. Because of this, if you want to return
to a previous startup image, you need to have a
separate copy of that image in the camera’s standard
image memory.
does not appear if you press [
camera.
] (PLAY) to turn on the
1. Press [MENU].
2. Select the “Set Up” tab, select “Startup”, and
then press [̈].
3. Use [̇] and [̈] to display the image you want
• The startup image is deleted if you format built-in
memory (page 175).
to use as the startup image.
• If you store an audio snapshot to startup image
memory, the image’s audio is not played when the
image is displayed at startup.
4. Use [̆] and [̄] to change the setting, and
then press [SET].
To do this:
Select this setting:
Use the currently displayed image
as the startup screen image
On
Off
Disable the startup screen
Download from Www.Somanuals.com. All Manuals Search And Download.
168
OTHER SETTINGS
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for
Setting the Clock
Use the procedures in this section to select a Home Time
Zone, and to change its date and time settings. If you want
to change the time and date setting only without changing
the Home Time Zone, perform the procedure under “To set
the current time and date” (page 170) only.
generating the serial number used for file names (page 160).
1. Press [MENU].
IMPORTANT!
2. Select the “Set Up” tab, select “File No.”, and
then press [̈].
• Make sure you select your Home Time zone (the
zone where you are currently located) before
changing the time and date settings. Otherwise, the
time and date setting will change automatically when
you select another time zone.
3. Use [̆] and [̄] to change the setting, and
then press [SET].
To do this for a newly saved file:
Select this setting:
Continue
Store the last file number used and
increment it, regardless of whether
files are deleted or whether the
memory card is replaced with a new
one
Find the highest file number in the
current folder and increment it
Reset
Download from Www.Somanuals.com. All Manuals Search And Download.
169
OTHER SETTINGS
To select your Home Time zone
To set the current time and date
1. Press [MENU].
1. Press [MENU].
2. Select the “Set Up” tab, select “World Time”,
and then press [̈].
2. Select the “Set Up” tab, select “Adjust”, and
then press [̈].
• This displays the current World Time zone.
3. Set the current date and the time.
3. Use [̆] and [̄] to select “Home”, and then
press [̈].
To do this:
Do this:
Change the setting at the current
cursor location
Press [̆] or [̄].
4. Use [̆] and [̄] to select “City”, and then
press [̈].
Move the cursor between settings Press [̇] or [̈].
Toggle between 12-hour and 24-
hour timekeeping
Press [DISP].
5. Use [̆], [̄], [̇], and [̈] to select the
geographical area that contains location you
want to select as your Home Time zone, and
then press [SET].
4. When all the settings are the way you want,
press [SET] to register them and exit the
setting screen.
6. Use [̆] and [̄] to select the city you want,
and then press [SET].
7. After selecting the city you want, press [SET]
to register its zone as your Home Time zone.
Download from Www.Somanuals.com. All Manuals Search And Download.
170
OTHER SETTINGS
Changing the Date Format
Using World Time
You can select from among three different formats for
display of the date.
You can use the World Time screen to select a time zone
and instantly change the time setting of the camera’s clock
when you go on a trip, etc. World Time lets you select one
of 162 cities in 32 time zones.
1. Press [MENU].
2. Select the “Set Up” tab, select “Date Style”,
and then press [̈].
To display the World Time screen
1. Press [MENU].
3. Use [̆] and [̄] to change the setting, and
then press [SET].
2. Select the “Set Up” tab, select “World Time”,
and then press [̈].
Example: December 24, 2005
To display the date like this:
05/12/24
Select this format:
YY/MM/DD
3. Use [̆] and [̄] to select “World”.
24/12/05
DD/MM/YY
To do this:
Select this:
Home
12/24/05
MM/DD/YY
Display the time in your home time zone
Display the time in the zone currently
selected on the World Time screen
World
4. Press [SET] to exit the setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
171
OTHER SETTINGS
5. Use [̆], [̄], [̇], and
[̈] to select the
To configure World Time settings
geographical area you
want, and then press
[SET].
1. Press [MENU].
2. Select the “Set Up” tab, select “World Time”,
and then press [̈].
3. Use [̆] and [̄] to select “World”, and then
press [̈].
6. Use [̆] and [̄] to select the city you want,
and then press [SET].
4. Use [̆] and [̄] to
select “City”, and then
press [̈].
7. When the setting is the way you want, press
[SET] to apply it and exit the setting screen.
• To configure the summer
time setting, select
“DST”, and then select
either “On” or “Off”.
• Summer time is used in some geographical areas to
advance the current time setting by one hour during
the summer months.
• Use of summer time depends on the local customs
and laws.
Download from Www.Somanuals.com. All Manuals Search And Download.
172
OTHER SETTINGS
Changing the Display Language
Changing the USB Port Protocol
You can use the following procedure to select one of ten
languages as the display language.
You can use the procedure below to change the
communication protocol of the camera’s USB port when
connecting to a computer, printer, or other external device.
Select the protocol that suits the device to which you are
connecting.
1. Press [MENU].
2. Select the “Set Up” tab, select “Language”,
and then press [̈].
1. Press [MENU].
2. Select the “Set Up” tab, select “USB”, and
then press [̈].
3. Use [̆], [̄], [̇], and [̈] to change the
setting, and then press [SET].
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
When connecting to this type of
Select this setting:
device:
Computer or USB DIRECT-
Mass Storage (USB
PRINT-compatible printer (page
DIRECT-PRINT)
188)
PictBridge-compatible printer
(page 188)
PTP (PictBridge)*
* “PTP” stands for “Picture Transfer Protocol”.
Download from Www.Somanuals.com. All Manuals Search And Download.
173
OTHER SETTINGS
• Mass Storage (USB DIRECT-PRINT) causes the camera
to see the computer as an external storage device. Use
this setting for normal transfer of images from the camera
to a computer (using the bundled Photo Loader
application).
Configuring [ ] (REC) and [ ] (PLAY)
Power On/Off Functions
You can use the following procedures to configure [
]
(REC) and [
] (PLAY) so power turns and/or off
whenever they are pressed.
• PTP (PictBridge) simplifies the transfer of image data to
the connected device.
1. Press [MENU].
2. Select the “Set Up” tab, select “REC/PLAY”,
and then press [̈].
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
Download from Www.Somanuals.com. All Manuals Search And Download.
174
OTHER SETTINGS
To configure this operation:
Select this setting:
Formatting Built-in Memory
Power turns on when [
] (REC) or
Formatting built-in memory deletes any data stored in it.
[
] (PLAY) is pressed (but does not Power On
turn off)
IMPORTANT!
Power turns on or off when [
]
Power On/Off
Disable
(REC) or [
Power does not turn on or off when
] (REC) or [ ] (PLAY) is
pressed
] (PLAY) is pressed
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes the following.
— Protected images
[
— FAVORITE folder images
— BEST SHOT mode user setups
— MOVIE BEST SHOT mode user setups
— Startup screen image
IMPORTANT!
• When “Power On/Off” is selected, pressing [
]
(REC) in a REC mode or [
mode turns off the camera.
] (PLAY) in the PLAY
• Pressing [
the currently selected recording mode, and pressing
] (PLAY) in a REC mode switches to the PLAY
mode.
] (REC) in the PLAY mode switches to
1. Check to make sure there is no memory card
loaded in the camera.
[
• If there is a memory card loaded in the camera,
remove it (page 179).
NOTE
• The initial default setting is “Power On”.
2. Press [MENU].
3. Select the “Set Up” tab, select “Format”, and
then press [̈].
Download from Www.Somanuals.com. All Manuals Search And Download.
175
OTHER SETTINGS
4. Use [̆] and [̄] to select “Format”, and then
press [SET]. Entering the PLAY mode after
formatting built-in memory will cause the
message “There are no files.” to appear.
• To exit the format operation without formatting,
select “Cancel”.
Download from Www.Somanuals.com. All Manuals Search And Download.
176
USING A MEMORY CARD
You can expand the storage
IMPORTANT!
capabilities of your camera by using
a commercially available memory
card (SD memory card or
MultiMediaCard). You can also
copy files from built-in flash
• Use only an SD memory card or a MultiMediaCard
with this camera. Proper operation is not guaranteed
when any other type of card is used.
• See the instructions that come with the memory card
for information about how to use it.
• Certain types of cards can slow down processing
speeds. If you are using a slow memory card, you
may not be able to record a movie using the “HQ”
image quality setting. Because of this, you should
use a high-speed type SD memory card whenever
possible.
memory to a memory card and from
a memory card to flash memory.
• Normally, files are stored in built-in flash memory. When
you insert a memory card, however, the camera
automatically stores files to the card.
• Note that you cannot save files to built-in memory while a
memory card is installed in the camera.
• Certain types of memory cards take longer to record
data, which can cause movie frames to be dropped.
REC
and
flash on the monitor screen during
recording to let you know when a frame has been
dropped.
• SD memory cards have a write protect switch, which
you can use to protect against accidental deletion of
image data. Note, however, if you write protect an
SD memory card, you must remove write protection
whenever you want to record to it, format it, or delete
any of its files.
• Electrostatic charge, digital noise, and other
phenomena can cause data to become corrupted or
even lost. Always maintain backup copies of
important data on other media (CD-R, CD-RW, MO
disc, computer hard disk, etc.)
Download from Www.Somanuals.com. All Manuals Search And Download.
177
USING A MEMORY CARD
2. Positioning the memory
card so its front is
Using a Memory Card
facing in the same
direction as the
camera’s monitor
IMPORTANT!
• Make sure you turn off the camera before inserting or
removing a memory card.
screen, carefully slide it
into the card slot. Slide
the card all the way in
until you hear it click
securely into place.
• Be sure to orient the card correctly when inserting it.
Never try to force a memory card into the slot when
you feel resistance.
To insert a memory card into the camera
1. Slide the battery cover
in the direction
Front
Back
indicated by the arrow,
and then swing it open.
3. Swing the battery cover
closed, and then slide it
in the direction
indicated by the arrow.
Download from Www.Somanuals.com. All Manuals Search And Download.
178
USING A MEMORY CARD
To replace the memory card
Formatting a Memory Card
Formatting a memory card deletes any data already stored
on it.
1. Press the memory card
into the camera and
then release it. This will
cause the card to come
part way out of the
camera.
IMPORTANT!
• Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then
using it in the camera can slow down data
processing by the camera. In the case of an SD card,
formatting on a computer can result in non-
conformity with the SD format, causing problems with
compatibility, operation, etc.
• Note that data deleted by a memory card format
operation cannot be recovered. Check to make sure
you do not need any of the data on the memory card
before you format it.
2. Pull the memory card out of the slot.
3. Load another memory card.
IMPORTANT!
• Never insert any other object besides a memory card
into the camera’s card slot. Doing so creates the risk
of damage to the camera and card.
• Should water or any foreign object ever get into the
card slot, immediately turn off the camera, remove
the battery, and contact your dealer or nearest
CASIO authorized service center.
• Formatting a memory card that contains files deletes
all the files, even those that are protected (page
161).
• Never remove a card from the camera while the
green operation lamp is flashing. Doing so can cause
the file save operation to fail, and even damage the
memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
179
USING A MEMORY CARD
I To format a memory card
I Memory Card Precautions
• If a memory card starts to behave abnormally, you can
restore normal operation by reformatting it. However, we
recommend that you always take along more than one
memory card whenever using the camera far away from
the home or office.
1. Load the memory card into the camera.
2. Turn on the camera, and press [MENU].
3. Select the “Set Up” tab, select “Format”, and
then press [̈].
• We recommend that you format a memory card before
using it for the first time after purchasing it, or whenever
the card you are using seems to be the cause of
abnormal images.
• As you record data to and delete data from an SD
memory card a number of times, it loses its ability to
retain data. Because of this, periodic re-formatting of an
SD memory card is recommended.
• Before starting a format operation, check to make sure
that the battery is fully charged. Power interruption during
the format operation can result in improper formatting,
and even damage the memory card and make it
unusable.
4. Use [̆] and [̄] to select “Format”, and then
press [SET]. Entering the PLAY mode after
formatting the memory card will cause the
message “There are no files.” to appear.
• To exit the format operation without formatting,
select “Cancel”.
Download from Www.Somanuals.com. All Manuals Search And Download.
180
USING A MEMORY CARD
To copy all the files in built-in memory to
a memory card
Copying Files
Use the procedures below to copy files between built-in
memory and a memory card.
1. Load the memory card into the camera.
IMPORTANT!
2. Turn on the camera. Next, enter the PLAY
mode and press [MENU].
• Only snapshot, movie, audio snapshot, and voice
recording files recorded with this camera can be
copied. Other files cannot be copied.
• Files in the FAVORITE folder cannot be copied.
• Copying an audio snapshot copies both its image file
and the audio file.
3. Select the “PLAY” tab,
select “Copy”, and
then press [̈].
Download from Www.Somanuals.com. All Manuals Search And Download.
181
USING A MEMORY CARD
4. Use [̆] and [̄] to select “Built-in
Card”,
To copy a specific file from a memory
card to built-in memory
and then press [SET].
• This starts the copy operation and displays the
message “Busy.... Please wait...”.
• After the copy operation is complete, the monitor
screen shows the last file in the folder.
1. Perform steps 1 through 3 of the procedure
under “To copy all the files in built-in memory
to a memory card”.
2. Use [̆] and [̄] to select “Card
Built-in”,
and then press [SET].
3. Use [̇] and [̈] to select the file you want to
copy.
4. Use [̆] and [̄] to select “Copy”, and then
press [SET].
• This starts the copy operation and displays the
message “Busy.... Please wait...”.
• The file reappears on the monitor screen after the
copy operation is complete.
• Repeat steps 3 through 4 to copy other images, if
you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
182
USING A MEMORY CARD
5. Press [MENU] to exit the copy operation.
NOTE
• Files are copied to the folder in built-in memory
whose name has the largest number.
Download from Www.Somanuals.com. All Manuals Search And Download.
183
PRINTING IMAGES
A digital camera provides you with a variety of different
ways to print the images it records. The three main printing
methods are described below. Use the method that best
suits your needs.
I Printing Directly on a Printer Equipped with
a Card Slot, or a Printer that Supports USB
DIRECT-PRINT or PictBridge
After using the camera’s DPOF feature to specify the
images you want to print and how many copies of each
should be printed, you can plug the memory card into a
printer equipped with a card slot, or connect the camera to
a PictBridge or USB DIRECT-PRINT printer for printing.
For more information, see “DPOF” (page 185) and “Using
PictBridge or USB DIRECT-PRINT” (page 188).
I Professional Print Service
The camera’s DPOF feature lets you specify which images
you want to print and how many copies of each you want.
For more information, see “DPOF” (page 185).
NOTE
• Certain print service providers may not support
DPOF or may support different printing protocols. In
this case, use the protocol supported by your print
service to specify the images you want to have
printed.
Download from Www.Somanuals.com. All Manuals Search And Download.
184
PRINTING IMAGES
I Printing with a Computer
Windows Users
The camera comes bundled with Photo Loader and
Photohands applications, which can be installed on a
Windows computer for image transfer, management, and
printing. For more information, see “Using the Camera with
a Windows Computer” (pages 194, 212).
DPOF
The letters “DPOF” stand for “Digital Print
Order Format”, which is a format for
recording on a memory card or other medium
which digital camera images should be
printed and how many copies of the image
should be printed. Then you can print on a
DPOF-compatible printer or at a professional
print service in accordance with the file name
and number of copies settings recorded on
the card.
Macintosh Users
The camera comes bundled with Photo Loader for the
Macintosh, which can be installed for image transfer and
management, but not for printing. Use commercially
available software for printing with a Macintosh. For more
information, see “Using the Camera with a Macintosh
Computer” (pages 202, 227).
With this camera, you can select images by viewing them
on the monitor screen without needing to remember file
names, their locations in memory, etc.
I DPOF Settings
File Name,
number of copies,
date
Download from Www.Somanuals.com. All Manuals Search And Download.
185
PRINTING IMAGES
5. Use [̆] and [̄] to specify the number of
To configure print settings for a single
image
copies.
• You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
1. In the PLAY mode, press [MENU].
2. Select the “PLAY” tab,
select “DPOF”, and
then press [̈].
6. To turn on date
stamping for the
prints, press [DISP] so
12
1
is displayed.
12
•
1
indicates that date
stamping is turned on.
• To turn off date stamping
3. Use [̆] and [̄] to select “Select images”,
and then press [̈].
for the prints, press
12
[DISP] so
displayed.
1
is not
4. Use [̇] and [̈] to
display the image you
want.
• Repeat steps 4 through 6 if you want to configure
other images for printing.
7. After all the settings are the way you want,
press [SET] to apply them.
Download from Www.Somanuals.com. All Manuals Search And Download.
186
PRINTING IMAGES
5. To turn on date stamping for the prints, press
To configure print settings for all images
12
[DISP] so
1
is displayed.
12
•
1
indicates that date stamping is turned on.
1. In the PLAY mode, press [MENU].
• To turn off date stamping for the prints, press [DISP]
so
12
2. Select the “PLAY” tab, select “DPOF”, and
1
is not displayed.
then press [̈].
6. After all the settings are the way you want,
press [SET] to apply them.
3. Use [̆] and [̄] to select “All images”, and
then press [̈].
4. Use [̆] and [̄] to
specify the number of
copies.
• You can specify up to 99
for the number of copies.
Specify 00 if you do not
want to have the image
printed.
Download from Www.Somanuals.com. All Manuals Search And Download.
187
PRINTING IMAGES
IMPORTANT!
Using PictBridge or USB DIRECT-PRINT
• DPOF settings are not cleared automatically after
printing is complete. This means that if you perform
another printing operation without clearing DPOF
settings, printing will be performed in accordance
with the last settings you configured. If you want to
prevent this from happening, perform the procedure
under “To configure print settings for all images”
(page 187) and change the number of copies to “00”.
After that, you can configure new DPOF settings as
required.
• If you take a memory card to a professional print
service, be sure to tell them that it includes DPOF
settings for the images to be printed and the number
of copies. If you don’t, the printing service may print
all images without regard to your DPOF settings, or
date printing may not be performed.
You can connect the camera
directly to a printer that supports
PictBridge or USB DIRECT-PRINT,
and perform image selection and
printing using the camera monitor
screen and controls. DPOF support
(page 185) also lets you specify
which images you want to print and
how many copies of each should be
printed.
• PictBridge is a standard
established by the Camera and
Imaging Products Association
(CIPA).
• USB DIRECT-PRINT is a
standard proposed by Seiko
Epson Corporation.
• Note that some professional print services do not
support DPOF printing. Check with your service
before ordering prints.
• Some printers may have settings that disable date
stamp and/or DPOF printing. See the user
documentation that comes with your printer for
details about how to enable these features.
Download from Www.Somanuals.com. All Manuals Search And Download.
188
PRINTING IMAGES
1. Press [MENU].
4. Connect the USB cable that comes bundled
with the camera to the USB cradle and a
printer.
2. Select the “Set Up” tab, select “USB”, and
then press [̈].
Connector B
USB cable
(bundled)
USB port
3. Use [̆] and [̄] to select the setting you
want, and then press [SET].
When connecting to this type of
Select this setting:
device:
Connector A
Computer or USB DIRECT-
PRINT-compatible printer
Mass Storage (USB
DIRECT-PRINT)
PictBridge-compatible printer
PTP (PictBridge)
[
](USB port)
• Mass Storage (USB DIRECT-PRINT) causes the
camera to see the computer as an external
storage device. Use this setting for normal transfer
of images from the camera to a computer (using
the bundled Photo Loader application).
• Also, connect the AC adaptor to the USB cradle and
plug the AC adaptor into an electrical outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Nothing appears on the camera’s monitor screen if
the camera is on the USB cradle while the bundled
AV cable is connected to the cradle. Be sure to
disconnect the AV cable from the cradle if you want
to use the camera’s monitor screen to view images.
• PTP (PictBridge) simplifies the transfer of image
data to the connected device.
5. Turn off the camera, and then set the camera
on the USB cradle.
Download from Www.Somanuals.com. All Manuals Search And Download.
189
B
PRINTING IMAGES
• Available paper size settings depend on the
connected printer. For full details, see the
instructions that come with your printer.
6. Turn on the printer.
7. Load paper for printing the images into the
printer.
11. Use [̆] and [̄] to
specify the print option
you want.
8. Press the USB
cradle’s [USB] button.
• To print a single image:
Select “1 Image” and then
press [SET]. Next, use
[̇] and [̈] to select the
image you want to print.
• This displays the print
menu on the camera’s
monitor screen.
• To print multiple images or all images: Select “DPOF
Printing”, and then press [SET]. Selecting this option
will print the images selected with the DPOF settings.
See page 185 for more information.
9. Use [̆] and [̄] to select “Paper Size”, and
then press [̈].
10. Use [̆] and [̄] to select the paper size you
• You can toggle date stamping of the image on and
want to use for printing, and then press [SET].
12
off by pressing [DISP]. The
date stamping is turned on.
icon indicates that
1
• The following are the print sizes that are available.
×
3.5˝ 5˝
×
×
5˝ 7˝
4˝ 6˝
A4
8.5˝ 11˝
×
By Printer
• Selecting “By Printer” prints using the paper size
selected on the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
190
B
PRINTING IMAGES
12. On the camera’s monitor screen, use [̆] and
[̄] to select “Print”, and then press [SET].
Date Printing
Any one of the procedures described below can be used to
include the recording date in image prints. Correct date
printing requires that the current date be set on the camera
before the image is recorded.
• Specifying date printing with DPOF settings (page 185)
– Some printers may have settings that disable time
stamp and/or DPOF printing. See the user
documentation that comes with your printer for details
about how to enable these features.
• This starts printing and displays the message
“Busy.... Please wait...” on the monitor screen. The
message will disappear after a short while, even
though printing is still being performed. Pressing any
of the camera’s buttons while printing is in progress
will cause the message to reappear.
• The print menu will appear when printing is
complete.
– Note that some professional print services do not
support DPOF printing. Check with your service before
ordering prints.
• Specifying date printing with the Photohands software
that comes with the camera
– See page 23 of the Photohands User’s Guide for
details. The Photohands User’s Guide is provided as a
PDF file on the CD-ROM that comes bundled with your
camera.
• If you selected “1 Image” in step 11, you can select
another image for printing and then repeat this step
to print.
13. After you are finished printing, press the USB
cradle’s [USB] button, and then turn off the
camera.
• Specifying date printing when having printing done by a
print service
– Some print services do not support date printing. Check
with your service for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
191
PRINTING IMAGES
I Printing Precautions
PRINT Image Matching III
• See the documentation that comes with your printer for
information about print quality and paper settings.
• Contact your printer manufacturer for information about
models that support PictBridge and USB DIRECT-PRINT,
upgrades, etc.
• Never disconnect the USB cable, or perform any camera
or USB cradle operation while printing is in progress.
Doing so causes a printer error.
Images include PRINT Image Matching
III data (mode setting and other camera
setup information). A printer that
supports PRINT Image Matching III
reads this data and adjusts the printed
image accordingly, so your images
come out just the way you intended
when you recorded them.
* Seiko Epson Corporation holds the
copyright for PRINT Image Matching and
PRINT Image Matching III.
Download from Www.Somanuals.com. All Manuals Search And Download.
192
PRINTING IMAGES
Exif Print
Exif Print is an
internationally supported,
open standard file format
that makes it possible to
capture and display vibrant
digital images with accurate
colors. With Exif 2.2, files
include a wide range of
shooting condition
information that can be
interpreted by an Exif Print
printer to produce better-
looking prints.
IMPORTANT!
• Information about the availability of Exif Print
compatible printer models can be obtained from each
printer manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
193
VIEWING IMAGES ON A COMPUTER
After using the USB cradle to establish a USB connection
Using the Camera with a Windows
between the camera and your computer, you can use your
computer to view images in file memory and copy images
to your computer’s hard disk or other storage media. In
order to do this, you first need to install the USB driver
located on the CD-ROM that comes bundled with the
camera onto your computer.
Note that the procedure you need to perform depends on
whether you are using computer running under Windows
(see below) or a Macintosh (see page 202).
Computer
The following are the general steps for viewing and copying
files from a computer running under Windows. You can find
details about each operation in the procedures that follow
below. Note that you should also refer to the
documentation that comes with your computer for other
information about USB connections, etc.
1. If you are running Windows 98SE or 98, install the
USB driver onto your computer.
• You need to perform this step only once, the first
time you connect to your computer.
• If you are running Windows XP, 2000, or Me, you do
not need to install the USB driver.
2. Use the USB cradle to establish a connection between
the camera and computer.
3. View and copy the images you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
194
VIEWING IMAGES ON A COMPUTER
IMPORTANT!
Do not try to establish a connection between the
camera and computer before installing the USB
driver onto the computer. If you do, the computer will
not be able to recognize the camera.
• USB driver installation is required in the case of
Windows 98SE and 98. Do not connect the camera to
a computer running one of the above operating
systems without installing the USB driver first.
• USB driver installation is not required in the case of
Windows XP, 2000, and Me.
• Low battery power can cause the camera to power
down suddenly during data communication. Use of
the special AC adaptor is recommended to power the
camera during data communication.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you place
it onto the USB cradle.
• Certain computer models, connecting through a USB
hub, and other system conditions can slow down
data transfer and even cause operational problems.
Download from Www.Somanuals.com. All Manuals Search And Download.
195
VIEWING IMAGES ON A COMPUTER
1. What you should do first depends on whether
your computer is running under Windows XP,
2000, Me, 98SE, or 98.
2. Set the bundled CD-ROM into the CD-ROM
drive of your computer.
• Use the CD-ROM whose contents label shows “USB
driver”.
Windows 98SE/98 Users
• Start from step 2 to install the USB driver.
3. On the menu screen that appears, click
“English”.
• Note that the example installation presented here
uses Windows 98.
4. Click [USB driver B] and then [Install].
Windows XP/2000/Me Users
• This starts installation.
• Installation of the USB driver is not required, so jump
directly to step 6.
• Follow the instructions that appear on your computer
screen to complete the installation.
• The following steps show installation under the
English version of Windows.
Download from Www.Somanuals.com. All Manuals Search And Download.
196
VIEWING IMAGES ON A COMPUTER
5. Depending on the operating system your
computer is running, a message may appear
telling you to restart your computer. If your
computer displays such a message, restart.
[DC IN 5.3V]
6. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
[DC IN 5.3V]
Download from Www.Somanuals.com. All Manuals Search And Download.
197
VIEWING IMAGES ON A COMPUTER
7. Connect the USB cable that comes bundled
with the camera to the USB cradle and your
computer’s USB port.
8. Press the camera’s power button to turn it on,
and then press its [MENU] button.
9. Select the “Set Up” tab, select “USB”, and
USB cable
(bundled)
Connector B
then press [̈].
USB port
10. Use [̆] and [̄] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
Connector A
11. Turn off the camera.
[
](USB port)
• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable
plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
Download from Www.Somanuals.com. All Manuals Search And Download.
198
VIEWING IMAGES ON A COMPUTER
• Pressing the [USB] button enters the USB mode,
which causes the USB cradle’s [USB] lamp to light
green (page 236).
12. Place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it
is turned on.
• At this point, some operating systems will display a
“Removable Disk” dialog box. If your operating
system does, close the dialog box.
[USB] button
[USB] lamp
13. Press the USB cradle’s [USB] button.
• This will cause your computer to create a hardware
profile for camera’s built-in memory or the memory
card loaded in the camera. You do not need to install
the USB driver every time. After you install it once,
your computer will recognize the camera’s built-in
memory or its memory card when you establish a
USB connection between the camera and your
computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
199
VIEWING IMAGES ON A COMPUTER
14. On your computer, double-click “My
Computer”.
19. Depending on your operating system, perform
one of the following procedures to save the
files, if you want.
• If you are running Windows XP, click [Start] and then
[My Computer].
Windows 2000, Me, 98SE, 98
15. Double-click “Removable Disk”.
1. In the camera’s file memory (Removable Disk), right-
click the “Dcim” folder.
• Your computer sees the camera’s file memory as a
removable disk.
2. On the shortcut menu that appears, click [Copy].
3. Double click [My Documents] to open it.
16. Double-click the “Dcim” folder.
4. On the My Documents [Edit] menu, click [Paste].
17. Double-click the folder that contains the
image you want.
• This copies the “Dcim” folder (which contains the
image files) to your “My Documents” folder.
18. Double-click the file that contains the image
you want to view.
• For information about file names, see “Memory
Folder Structure” on page 209.
NOTE
• If you open a rotated image on your computer, the
original unrotated version will appear (page 150).
This is true both for a rotated image opened from
camera memory and for a rotated image that has
been copied to your computer’s hard disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
200
VIEWING IMAGES ON A COMPUTER
Windows XP
20. Depending on the version of Windows you are
running, use one of the following procedures
to terminate the USB connection.
1. In the camera’s file memory (Removable Disk), right-
click the “Dcim” folder.
2. On the shortcut menu that appears, click [Copy].
3. Click [Start] and then [My Documents].
Windows XP/98SE/98 Users
• After pressing the USB cradle’s [USB] button and
making sure that the [USB] lamp is not lit, remove
the camera from the USB cradle.
4. On the My Documents [Edit] menu, click [Paste].
• This copies the “Dcim” folder (which contains the
image files) to your “My Documents” folder.
Windows 2000/Me Users
• Click card services in the task tray on your computer
screen, and disable the drive number assigned to the
camera. After pressing the USB cradle’s [USB]
button and making sure that the [USB] lamp is not lit,
remove the camera from the USB cradle.
IMPORTANT!
• Never use your computer to edit, delete, move, or
rename images stored in the camera’s file memory.
Doing so can cause problems with the image
management data used by the camera, which may
make it impossible to display images on the camera
or it may cause large error in the number of images
value displayed by the camera. Always copy images
to your computer before performing any edit, delete,
move, or rename operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
201
VIEWING IMAGES ON A COMPUTER
I USB Connection Precautions
Using the Camera with a Macintosh
Computer
The following are the general steps for viewing and copying
files from a Macintosh.
• Do not leave the same image displayed on your computer
screen for a long time. Doing so can cause the image to
“burn in” on the screen.
• Never disconnect the USB cable, or perform any camera
or USB cradle operation while data communication is in
progress. Doing so can cause data to become corrupted.
You can find details about each operation in the
procedures that follow below. Note that you should also
refer to the documentation that comes with your Macintosh
for other information about USB connections, etc.
IMPORTANT!
•
•
Movie files cannot be played back on a Macintosh.
This camera does not support operation on a
computer running Mac OS 8.6 or lower, or Mac OS X
10.0. If you have a Macintosh running Mac OS 9 or
OS X (10.1, 10.2 or 10.3), use the standard USB
driver that comes with your OS.
1. Use the USB cradle to establish a connection between
the camera and your Macintosh.
2. View and copy the images you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
202
VIEWING IMAGES ON A COMPUTER
IMPORTANT!
1. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle, and then
plug it in to a household power outlet.
• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you place
it onto the USB cradle.
• Certain computer models, connecting through a USB
hub, and other system conditions can slow down
data transfer and even cause operational problems.
• If you are using battery power without the AC
adaptor, make sure that the battery is fully charged.
• Note that the shape of the AC adaptor depends on
the area where you purchased the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
203
VIEWING IMAGES ON A COMPUTER
2. Connect the USB cable that comes bundled
with the camera to the USB cradle and your
computer’s USB port.
USB cable
(bundled)
Connector B
[DC IN 5.3V]
USB port
Connector A
[
](USB port)
• Take care when connecting the USB cable to the
USB cradle or your computer. USB ports and cable
plugs are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
[DC IN 5.3V]
Download from Www.Somanuals.com. All Manuals Search And Download.
204
VIEWING IMAGES ON A COMPUTER
3. Press the camera’s power button to turn it on,
and then press its [MENU] button.
8. Press the USB cradle’s [USB] button.
• Pressing the [USB] button enters the USB mode,
which causes the USB cradle’s [USB] lamp to light
green (page 236).
4. Select the “Set Up” tab, select “USB”, and
then press [̈].
9. Your Macintosh will see the camera’s file
memory as a drive.
5. Use [̆] and [̄] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
• The appearance of the drive icon depends on the
Mac OS version you are using.
6. Turn off the camera.
• Your Macintosh will see the camera’s file memory as
a drive whenever you establish a USB connection
between the camera and your Macintosh.
7. Place the camera onto the USB cradle.
• Do not place the camera onto the USB cradle while it
is turned on.
10. Double-click the drive icon for the camera’s
file memory, the “DCIM” folder, and then the
folder that contains the image you want.
[USB] button
[USB] lamp
Download from Www.Somanuals.com. All Manuals Search And Download.
205
VIEWING IMAGES ON A COMPUTER
IMPORTANT!
11. Double-click the file that contains the image
you want to view.
• Never use your computer to edit, delete, move, or
rename images stored in the camera’s file memory.
Doing so can cause problems with the image
management data used by the camera, which may
make it impossible to display images on the camera
or it may cause large error in the number of images
value displayed by the camera. Always copy images
to your computer before performing any edit, delete,
move, or rename operation.
• For information about file names, see “Memory
Folder Structure” on page 209.
NOTE
• If you open a rotated image on your Macintosh, the
original unrotated version will appear (page 150).
This is true both for a rotated image opened from
camera memory and for a rotated image that has
been copied to your Macintosh hard disk.
13. To terminate the USB connection, drag the
drive icon that represents the camera to
Trash.
12. To copy all the files in file memory to your
Macintosh hard disk, drag the “DCIM” folder
to the folder to which you want to copy it.
14. Press the USB cradle’s [USB] button. After
making sure the [USB] lamp is not lit, remove
the camera from the USB cradle.
Download from Www.Somanuals.com. All Manuals Search And Download.
206
VIEWING IMAGES ON A COMPUTER
I USB Connection Precautions
Using a Memory Card to Transfer Images
to a Computer
The procedures in this section describe how to transfer
images from the camera to your computer using a memory
card.
• Do not leave the same image displayed on your computer
screen for a long time. Doing so can cause the image to
“burn in” on the screen.
• Never disconnect the USB cable, or perform any camera
or USB cradle operation while data communication is in
progress. Doing so can cause data to become corrupted.
Using a Computer with a Built-in SD Memory Card Slot
Insert the SD memory card directly into the slot.
Using a Computer with a Built-in PC Card Slot
Use a commercially available PC card adaptor (for an SD
memory card or MMC). For full details, see the user
documentation that comes with the PC card adaptor and
your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
207
VIEWING IMAGES ON A COMPUTER
Using a Commercially Available SD Memory Card
Reader/Writer
See the user documentation that comes with the SD
Memory Data
Images recorded with this camera and other data are
stored in memory using DCF (Design rule for Camera File
system) protocol. DCF protocol is designed to make it
easier to exchange image and other data between digital
cameras and other devices.
memory card reader/writer for details about how to use it.
DCF Protocol
DCF devices (digital cameras, printers, etc.) can exchange
images with each other. DCF protocol defines a format for
image file data and the folder structure for file memory, so
images can be viewed using another manufacturer’s DCF
camera or printed on a DCF printer.
Using a Commercially Available PC Card Reader/Writer
and PC Card Adaptor (for an SD memory card or MMC)
See the user documentation that comes with the PC card
reader/writer and PC card adaptor for details about how to
use them.
Download from Www.Somanuals.com. All Manuals Search And Download.
208
VIEWING IMAGES ON A COMPUTER
Memory Folder Structure
I Folder Structure
I Folder and File Contents
• DCIM folder
Folder that stores all of the digital camera files
DCIM
(DCIM Folder)
• Storage folder
100CASIO
CIMG0001.JPG
(Storage folder)
(Image file)
Folder for storing files created by the digital camera
CIMG0002.AVI
CIMG0003.WAV
CIMG0004.JPG
CIMG0004.WAV
(Movie file)
• Image file
(Audio file)
(Audio snapshot image file)
(Audio snapshot audio file)
File that contains an image recorded with the digital
camera (File Name Extension: JPG)
101CASIO
102CASIO
(Storage folder)
(Storage folder)
• Movie file
File that contains a movie recorded with the digital
camera (File Name Extension: AVI)
FAVORITE
(FAVORITE folder)
*
• Audio file
CIMG0001.JPG
CIMG0002.JPG
(Storage file)
(Storage file)
File that contains an audio recording (File Name
Extension: WAV)
MISC
AUTPRINT.MRK
(DPOF file folder)
(DPOF file)
• Audio snapshot image file
File that contains the image part of an audio snapshot
(File Name Extension: JPG)
SCENE
(BEST SHOT folder)
*
• Audio snapshot audio file
UZ750001.JPE
UZ750002.JPE
(BEST SHOT User setup file)
(BEST SHOT User setup file)
File that contains the audio part of an audio snapshot
(File Name Extension: WAV)
MSCENE
(MOVIE BEST SHOT Folder)
*
UZ750001.JPE
UZ750002.JPE
(MOVIE BEST SHOT user setup file)
(MOVIE BEST SHOT user setup file)
* These folders are created in built-in memory only.
Download from Www.Somanuals.com. All Manuals Search And Download.
209
VIEWING IMAGES ON A COMPUTER
• FAVORITE folder (Built-in memory only)
Folder that contains Favorites image files
Image Files Supported by the Camera
• Image files recorded with this camera
• DCF protocol image files
×
(Image Size: 320 240 pixels)
• DPOF file folder
Folder that contains DPOF files
Certain DCF functions may not be supported. When
displaying an image recorded on another camera model, it
may take a long time for the image to appear on the
display.
• BEST SHOT folder (Built-in memory only)
Folder that contains BEST SHOT user setup files
• BEST SHOT user setup files (Built-in memory only)
Files that contain BEST SHOT user setups
• MOVIE BEST SHOT folder (Built-in memory only)
Folder that contains MOVIE BEST SHOT user setup files
• MOVIE BEST SHOT user setup files (Built-in memory
only)
Files that contain MOVIE BEST SHOT user setups
Download from Www.Somanuals.com. All Manuals Search And Download.
210
VIEWING IMAGES ON A COMPUTER
I Built-in Memory and Memory Card
Precautions
• Note that the folder named “DCIM” is the parent (top)
folder of all the files in memory. When transferring
memory contents to a hard disk, CD-R, MO disk, or other
external storage, treat all the contents inside a DCIM
folder as a set and always keep them together. You can
change the name of the DCIM folder on your computer.
Changing the name to a date is a good way to keep track
of multiple DCIM folders. However, if you even want to
copy the folders back to the camera’s file memory, be
sure you change the name of the DCIM folder back to
“DCIM” first. The camera does not recognize any folder
name other than DCIM.
• Memory Folders and files must be stored in accordance
with the “Memory Folder Structure” shown on page 209 in
order for the camera to be able to recognize them
correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
211
USING THE CAMERA WITH A COMPUTER
This section explains the software and applications on the CD-ROM that comes bundled with the camera, and provides an
overview of what you can do with them.
Note that the procedure you need to perform depends on whether you are using computer running under Windows (see below)
or a Macintosh (see page 227).
Using the Camera with a Windows Computer
Your digital camera comes bundled with useful applications for using it in combination with a computer. Install the applications
you need on your computer.
About the bundled CD-ROM
The CD-ROM that comes bundled with the camera contains the applications described below. Installation of these applications
is optional, and you should install only the ones you want to use.
CD-ROM Software
Purpose
Software Name
Supported Windows Versions
XP/2000/Me
Required Operation
USB connection to a computer for
image transfer
–
Use the USB cradle to establish a
connection between the camera and
computer. Installation of the USB driver
is not required (page 194).
USB driver Type B
98SE/98
Use the USB cradle to establish a
connection between the camera and
computer. Install the USB driver Type
B
(page 194).
Management of images transferred
to a computer
Photo Loader 2.3
* DirectX 9.0c
XP/2000/Me/98SE/98
Install Photo Loader 2.3 (page 216).
* If the computer does not have
DirectX 9.0 or higher installed, install
DirectX 9.0c (page 218).
Download from Www.Somanuals.com. All Manuals Search And Download.
212
USING THE CAMERA WITH A COMPUTER
CD-ROM Software
Supported Windows Versions
Purpose
Software Name
Required Operation
Snapshot retouching,
reorientation, printing
Photohands 1.0
XP/2000/Me/98SE/98
Install Photohands 1.0 (page 219).
Movie playback
Windows Media Player 9
* DirectX 9.0c
XP/2000/Me/98SE
• If you can connect to the Internet, connect to
the Internet for automatic installation for the
applicable codec (page 221).
• If you cannot connect to the Internet, install
Windows Media Player 9 (page 222).
*If you are running Windows 2000 or 98SE
with a DirectX version that is lower than 9.0c,
install DirectX 9.0c (page 218).
Windows 98
WMP6.4 codec
98
• If you can connect to the Internet, connect to
the Internet for automatic installation for the
applicable codec (page 221).
• If you cannot connect to the Internet, install the
Windows 98 WMP6.4 codec (page 223).
Movie editing
Ulead Movie Wizard SE
VCD
XP/2000
Install Ulead Movie Wizard SE VCD (page 224).
–
Me/98SE/98
–
Viewing of user
documentation (PDF) files
Adobe Reader 6.0
XP/2000/Me/98SE
If your computer does not already have Adobe
Reader or Adobe Acrobat Reader installed,
install Adobe Reader 6.0 (page 225).
–
98
If your computer does not already have Adobe
Reader or Adobe Acrobat Reader installed, go to
the Adobe Systems Incorporated website and
install Acrobat Reader 5.0.5.
Download from Www.Somanuals.com. All Manuals Search And Download.
213
USING THE CAMERA WITH A COMPUTER
USB driver Type B
OS: 98SE/98
Computer System Requirements
Computer system requirements are different for each of the
applications. Be sure to check the requirements for the
particular application you are trying to use. Note that the
values provided here are minimum requirements for
running each application. Actual requirements are greater,
depending on the number of images and the sizes of the
images being handled.
• In the case of Windows XP, 2000, or Me, connect the
camera to the computer using the bundled USB cradle.
You do not need to install the USB driver from the
bundled CD-ROM.
• Correct operation is not guaranteed on a computer that
has been upgraded from Windows 95 or 3.1.
Photo Loader 2.3
OS: XP/2000/Me/98SE/98
Memory: At least 16MB
HD: At least 7MB
Other: Internet Explorer 5.5 or higher; DirectX 9.0 or higher
These are the minimum system requirements to run the
application. Actual requirements are greater, depending on
the number of images and the sizes of the images being
handled.
Download from Www.Somanuals.com. All Manuals Search And Download.
214
USING THE CAMERA WITH A COMPUTER
Photohands 1.0
Windows Media Player 9
OS: XP/2000/Me/98SE
CPU: 233 MHz Intel Pentium II, AMD, etc.
Memory: 64MB
OS: XP/2000/Me/98SE/98
Memory: At least 64MB
HD: At least 10MB
HD: 100MB
×
DirectX 9.0c
Other: Sound card; 800 600 or greater display resolution;
OS: XP/2000/Me/98SE/98
Internet Explorer 5.01 or higher
HD: At least 65MB free space during installation, 18MB
after installation is complete.
• If you are running Windows 98, install the Windows 98
WMP6.4 codec from the CD-ROM.
Adobe Reader 6.0
OS: XP/2000/Me/98SE
CPU: Pentium
Memory: 32MB
HD: 60MB
Ulead Movie Wizard SE VCD
OS: XP/2000
CPU: Pentium III 800MHz
Memory: 256MB
HD: 250MB
Other: 1024 768 or higher display resolution
Other: Internet Explorer 5.01 or higher
×
IMPORTANT!
• For details about Windows minimum system
requirements, see the “Read me” file on the CD-
ROM that comes bundled with the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
215
USING THE CAMERA WITH A COMPUTER
I Getting Started
Managing Images on a PC
Start up your computer and insert the CD-ROM into its CD-
ROM drive. This will automatically launch the menu
application, which displays a menu screen on your
computer.
To manage images on a PC, you need to install the Photo
Loader application from the CD-ROM that comes with the
camera.
• Use the CD-ROM whose contents label shows “Photo
Loader”.
• The menu application may not start up automatically on
some computers. If this happens, navigate to the CD-
ROM and double-click “menu.exe” to launch the menu
application.
NOTE
• If you already have Photo Loader installed on your
computer, check its version. If the bundled version is
newer than the one you have, uninstall the old
version of Photo Loader and then install the newer
version.
I Selecting a Language
First select a language. Note that some software is not
available in all languages.
The CD-ROM includes the software and user
documentation for various languages. Check the CD-ROM
menu screen to see if applications and user documentation
are available for a particular language.
1. On the menu screen, click the tab for the
language you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
216
USING THE CAMERA WITH A COMPUTER
I Viewing the Contents of the “Read me” File
I Installing Photo Loader
You should always read the “Read me” file for “Photo
Loader” before installing it. The “Read me” file contains
information you need to know when installing the
application.
1. Click the “Install” button for “Photo Loader”.
2. Follow the instructions that appear on your
computer screen.
1. Click the “Read me” button for “Photo
Loader”.
IMPORTANT!
• Be sure to follow the instructions carefully and
completely. If you make a mistake when installing
Photo Loader, you may not be able to browse your
existing library information and HTML files that are
created automatically by Photo Loader. In some
cases, image files may be lost.
IMPORTANT!
• Before upgrading or reinstalling Photo Loader, or
before installing it onto another computer, be sure to
read the “Read me” file for information about
retaining existing libraries.
Download from Www.Somanuals.com. All Manuals Search And Download.
217
USING THE CAMERA WITH A COMPUTER
4. Click [Exit] to exit DirectX Diagnostic Tool.
I Checking for the Proper Version of DirectX
• If your PC already has DirectX 9.0 or higher
installed, you do not need to install DirectX 9.0c from
the bundled CD-ROM.
In order to manage images using Photo Loader, your
computer also needs to have DirectX 9.0 or higher
installed. You can check the installed version of DirectX
using your PC’s DirectX Diagnostic Tool.
• If your PC does not have DirectX 9.0 or higher
installed, install DirectX 9.0c from the bundled CD-
ROM.
1. On your PC, click [Start], [All Programs],
[Accessories], [System Tools], and then
[System Information].
2. On the [Tools] menu of the window that
appears, select [DirectX Diagnostic Tool].
3. On the [System] tab, check to make sure that
the version shown for the “DirectX Version”
item is 9.0 or higher.
Download from Www.Somanuals.com. All Manuals Search And Download.
218
USING THE CAMERA WITH A COMPUTER
I Getting Started
Retouching, Reorienting, and Printing a
Snapshot
In order to retouch, reorient, or print snapshots on your PC,
you need to install Photohands from the CD-ROM that
comes bundled with the camera.
Start up your computer and insert the CD-ROM into its CD-
ROM drive. This will automatically launch the menu
application, which displays a menu screen on your
computer.
• Use the CD-ROM whose contents label shows
“Photohands”.
• The menu application may not start up automatically on
some computers. If this happens, navigate to the CD-
ROM and double-click “menu.exe” to launch the menu
application.
NOTE
• If you already have Photohands installed on your
computer, check its version. If the bundled version is
newer than the one you have, uninstall the old
version of Photohands and then install the newer
version.
I Selecting a Language
First select a language. Note that some software is not
available in all languages.
The CD-ROM includes the software and user
1. On the menu screen, click the tab for the
language you want.
documentation for various languages. Check the CD-ROM
menu screen to see if applications and user documentation
are available for a particular language.
Download from Www.Somanuals.com. All Manuals Search And Download.
219
USING THE CAMERA WITH A COMPUTER
I Viewing the Contents of the “Read me” File
I Installing Photohands
You should always read the “Read me” file for
“Photohands” before installing it. The “Read me” file
contains information you need to know when installing the
application.
1. Click the “Install” button for “Photohands”.
2. Follow the instructions that appear on your
computer screen.
1. Click the “Read me” button for “Photohands”.
Download from Www.Somanuals.com. All Manuals Search And Download.
220
USING THE CAMERA WITH A COMPUTER
5. This will cause the movie file recorded with
the camera to start playing.
Playing a Movie
In order to play a movie recorded with this camera on your
PC using Windows Media Player, you need to install
MPEG-4 codec.
NOTE
• If your PC already has MPEG-4 codec installed, it
will start playing the movie as soon as you click it.
• Note the following important precautions when
playing back a movie using Windows Media Player 9.
— When using a high-speed type SD memory card
Use Windows Media Player as-is, without
changing its basic settings.
I To install the codec on a PC that can
connect to the Internet
1. Connect the PC to the Internet.
— When using an SD memory card that is not a
high-speed type
2. Click the movie file that was recorded with the
camera.
Change Windows Media Player settings as shown
below. These settings will enable more stable
movie display.
3. If your PC does not have MPEG-4 codec
installed, it will connect to the Microsoft
website automatically and download the
codec.
1. On the Windows Media Player [Tools] menu, select
[Options]. On the dialog box that appears, open the
[Performance] tab.
2. In the “Video acceleration” area click [Advanced].
3. In the “Video acceleration” area, clear the “Use video
mixing renderer” check box.
4. Install the downloaded MPEG-4 codec.
4. In the “Legacy video renderer” area, clear the “Use
YUV Flipping” check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
221
USING THE CAMERA WITH A COMPUTER
G Getting Started
I To install the codec on a PC that cannot
Start up your computer and insert the CD-ROM into its CD-
ROM drive. This will automatically launch the menu
application, which displays a menu screen on your
computer.
connect to the Internet
If your PC cannot connect to the Internet, install Windows
Media Player 9 from the CD-ROM that comes bundled with
the camera.
• Use the CD-ROM whose contents label shows “Windows
Media Player”.
• The menu application may not start up automatically on
some computers. If this happens, navigate to the CD-
ROM and double-click “menu.exe” to launch the menu
application.
G Selecting a Language
First select a language. Note that some software is not
available in all languages.
1. On the menu screen, click the tab for the
language you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
222
USING THE CAMERA WITH A COMPUTER
G Viewing the Contents of the “Read me” File
You should always read the “Read me” file for “Windows
Media Player 9” before installing it. The “Read me” file
contains information you need to know when installing the
application.
IMPORTANT!
• If your PC is running Windows 98, install the
Windows 98 WMP6.4 codec instead of Windows
Media Player 9.
• In the case of Windows 2000 or 98SE, you need to
install DirectX 9.0c. For information about
determining the version of DirectX on your PC, see
page 218.
• Note the following important precautions when
playing back a movie using Windows Media Player 9.
— When using a high-speed type SD memory card
Use Windows Media Player as-is, without
changing its basic settings.
1. Click the “Read me” button for “Windows
Media Player 9”.
G Installing Windows Media Player 9
1. Click the “Install” button for “Windows Media
Player 9”.
— When using an SD memory card that is not a
high-speed type
Change Windows Media Player settings as shown
below. These settings will enable more stable
movie display.
2. Follow the instructions that appear on your
computer screen.
1. On the Windows Media Player [Tools] menu, select
[Options]. On the dialog box that appears, open the
[Performance] tab.
2. In the “Video acceleration” area click [Advanced].
3. In the “Video acceleration” area, clear the “Use video
mixing renderer” check box.
4. In the “Legacy video renderer” area, clear the “Use
YUV Flipping” check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
223
USING THE CAMERA WITH A COMPUTER
I Getting Started
Editing a Movie
Start up your computer and insert the CD-ROM into its CD-
ROM drive. This will automatically launch the menu
application, which displays a menu screen on your
computer.
In order to edit movies on your PC, you need to install
Ulead Movie Wizard SE VCD from the bundled CD-ROM.
• Use the CD-ROM whose contents label shows “Ulead
Movie Wizard SE VCD”.
• The menu application may not start up automatically on
some computers. If this happens, navigate to the CD-
ROM and double-click “menu.exe” to launch the menu
application.
IMPORTANT!
• Operation of Ulead Movie Wizard SE VCD is not
supported under Windows Me, 98SE, or 98.
NOTE
I Selecting a Language
First select a language. Note that some software is not
available in all languages.
• The Ulead Movie Wizard SE VCD application that
comes on the bundled CD-ROM can create Video-
CDs, but it cannot created DVDs. If you want to be
able to create DVDs, you need to upgrade to the
commercial version. See the “Read me” file on the
CD-ROM for information about Ulead Movie Wizard
SE VCD, and what you need to do to upgrade to the
commercial version.
1. On the menu screen, click the tab for the
language you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
224
USING THE CAMERA WITH A COMPUTER
I Viewing the Contents of the “Read me” File
Viewing User Documentation (PDF Files)
You should always read the “Read me” file for “Ulead
Movie Wizard SE VCD” before installing it. The “Read me”
file contains information you need to know when installing
the application.
1. In the “Manual” area, click the name of the
manual you want to read.
IMPORTANT!
1. Click the “Read me” button for “Ulead Movie
Wizard SE VCD”.
• You must have Adobe Reader or Adobe Acrobat
Reader installed on your computer in order to view
the contents of a PDF file. If you do not already have
Adobe Reader installed, you can install it from the
bundled CD-ROM.
I Installing Ulead Movie Wizard SE VCD
1. Click the “Install” button for “Ulead Movie
Wizard SE VCD”.
2. Follow the instructions that appear on your
computer screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
225
USING THE CAMERA WITH A COMPUTER
User Registration
You can perform user registration over the Internet. To do
so, of course, you need to be able to connect to the
Internet with your computer.
1. Click the “Register” button.
• This starts up your Web browser and accesses the
user registration website. Follow the instructions that
appear on your computer screen to register.
Exiting the Menu Application
1. On the menu screen, click “Exit” to exit the
menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
226
USING THE CAMERA WITH A COMPUTER
Using the Camera with a Macintosh Computer
Your digital camera comes bundled with useful applications for using it in combination with a computer. Install the applications
you need on your computer.
About the bundled CD-ROM
The CD-ROM that comes bundled with the camera contains the applications described below. Installation of these applications
is optional, and you should install only the ones you want to use.
CD-ROM Software
Mac OS Versions
OS 9/OS X
Purpose
For the Macintosh
Required Operation
USB connection to a Macintosh for
image transfer
–
Use the USB cradle to establish a
connection between the camera
and your Macintosh. USB driver is
not required (page 202).
Managing of Images on a Macintosh
Photo Loader 1.1
OS 9
OS X
Install Photo Loader 1.1 (page
229).
–
Use iPhoto, which comes bundled
with your operating system (page
229).
Viewing of user documentation
(PDF) files
–
OS 9/OS X
Use Adobe Reader or Adobe
Acrobat Reader, which comes
bundled with your operating
system (page 230).
IMPORTANT!
• Movie files cannot be played back on a Macintosh.
Download from Www.Somanuals.com. All Manuals Search And Download.
227
USING THE CAMERA WITH A COMPUTER
Photo Loader 1.1
OS: 9
Memory: 32MB
HD: At least 3MB
Computer System Requirements
Computer system requirements are different for each of the
applications. Be sure to check the requirements for the
particular application you are trying to use. Note that the
values provided here are minimum requirements for
running each application. Actual requirements are greater,
depending on the number of images and the sizes of the
images being handled.
• USB connection is supported on a Macintosh running OS
9 or X. Operation is supported using the standard USB
driver that comes with the operating system, so all you
need to do is connect the camera to your Macintosh using
the USB cable.
IMPORTANT!
• For details about Macintosh minimum system
requirements, see the “Readme” file on the CD-ROM
that comes bundled with the camera.
• The software on the CD-ROM that comes bundled
with the camera does not support operation under
Mac OS X.
Download from Www.Somanuals.com. All Manuals Search And Download.
228
USING THE CAMERA WITH A COMPUTER
IMPORTANT!
Managing Images on a Macintosh
• If you are upgrading to the new version of Photo
Loader from a previous version and you want to use
library management data and HTML files created
using the old version of Photo Loader, be sure to
read the “Important” file in the “Photo Loader” folder.
Follow the instructions in the file to use your existing
library management files. Failure to follow this
procedure correctly can result in loss or corruption of
your existing files.
I To manage images on a Macintosh running
OS 9
Install the Photo Loader application from the CD-ROM that
comes with the camera.
• Use the CD-ROM whose contents label shows “Photo
Loader”.
• Movie files cannot be played back on a Macintosh.
G To install Photo Loader
I To manage images on a Macintosh running
OS X
1. Open the folder named “Photo Loader”.
Use iPhoto, which comes bundled with the operating
system. iPhoto enables management of snapshots.
2. Open the folder named “English”, and then
open the file named “Important”.
3. Open the folder named “Installer”, and then
open the file named “readme”.
4. Follow the instructions in the “readme” file to
install Photo Loader.
Download from Www.Somanuals.com. All Manuals Search And Download.
229
USING THE CAMERA WITH A COMPUTER
I To view the Photo Loader user’s guide
1. On the CD-ROM, open the “Manual” folder.
Viewing User Documentation (PDF Files)
You must have Adobe Reader or Adobe Acrobat Reader
installed on your computer in order to view the contents of
a PDF file.
If you don’t, go to the Adobe Systems Incorporated website
and install Acrobat Reader.
2. Open the “Photo Loader” folder and then
open the “English” folder.
3. Open “PhotoLoader_english”.
I To view the camera user’s guide
1. On the CD-ROM, open the “Manual” folder.
To register as a camera user
Internet registration only is supported. Visit the following
CASIO website to register:
2. Open the “Digital Camera” folder, and then
open the folder for the language whose user’s
guide you want to view.
http://world.casio.com/qv/register/
3. Open the file named “camera_xx.pdf”.
•
“xx” is the language code (Example: camera_e.pdf is
for English.)
Download from Www.Somanuals.com. All Manuals Search And Download.
230
APPENDIX
Icon Help
Memory
On / Off
Menu Reference
Flash / Focus / White Balance / ISO /
AF Area / Metering / Self-timer /
Flash Intensity / Digital Zoom /
MF Position / Zoom Position
The following shows lists of menus that appear in REC
modes and the PLAY mode, and their settings.
• The settings that are underlined in the following table are
initial defaults.
I REC Modes
G REC Tab Menu
Self-timer
10 sec / 2 sec / X3 / Off
Spot / Multi /
On / Off
On / Off
AF Area
Free
AF Assist Light
Quick Shutter
L/R Key
EV Shift / White Balance / ISO /
Metering / Self-timer / Off
On / Off
Audio Snap
Grid
On / Off
Digital Zoom
Review
On / Off
On / Off
Download from Www.Somanuals.com. All Manuals Search And Download.
231
APPENDIX
G Quality Tab Menu
G Set Up Tab Menu
×
×
×
×
Size
3072 2304 / 3072 2048 (3:2) /
Screen
Sounds
Bright / Normal
Startup / Half Shutter /Shutter / Operation /
Operation / Play
×
2560 1920 / 2048 1536 / 1600 1200 /
×
640 480
Quality
Fine / Normal / Economy
HQ / Normal / LP
Startup
On (Selectable image) / Off
Continue / Reset
(Snapshots)
Quality
File No.
World Time
Home / World
(Movies)
EV Shift
Home Time setup (city, DST, etc.)
World Time setup (city, DST, etc.)
Time setting
–2.0 / –1.7 / –1.3 / –1.0 / –0.7 / –0.3 / 0.0 /
+0.3 / +0.7 / +1.0 / +1.3 / +1.7 / +2.0
Adjust
White Balance
Auto /
(Daylight) /
(Cloudy) /
Date Style
Language
YY/MM/DD / DD/MM/YY / MM/DD/YY
/ English / Français / Deutsch /
Español / Italiano / Português /
/
1
(Shade) /
(Fluorescent 1) /
(Tungsten) / Manual
2
(Fluorescent 2) /
/
ISO
Auto / ISO 50 / ISO 100 / ISO 200 / ISO 400
Multi / Center weighted / Spot
+2 / +1 / 0 / –1 / –2
Metering
Sleep
30 sec / 1 min / 2 min / Off
2 min / 5 min
Sharpness
Saturation
Contrast
Auto Power Off
REC / PLAY
USB
+2 / +1 / 0 / –1 / –2
Power On / Power On/Off / Disable
+2 / +1 / 0 / –1 / –2
Mass Storage (USB DIRECT- PRINT) /
PTP (PictBridge)
Flash Intensity
Flash Assist
+2 / +1 / 0 / –1 / –2
Auto / Off
Video Out
Format
Reset
NTSC / PAL
Format / Cancel
Reset / Cancel
Download from Www.Somanuals.com. All Manuals Search And Download.
232
APPENDIX
G Set Up Tab Menu
• The contents of the PLAY mode set up tab menu are
identical to those of the REC modes set up tab menu.
I PLAY Mode
G PLAY Tab Menu
Slideshow
Start / Images / Time / Interval / Effect /
Cancel
MOTION PRINT
Movie Editing
9 frames / 1 frame / Cancel
Cut (Before) /
Cut
(Between) /
Cut (After) / Cancel
(Cloudy) /
White Balance
(Daylight) /
(Shade) /
1
(Fluorescent 1) /
2
(Fluorescent 2) /
(Tungsten) /
Cancel
Brightness
Favorites
DPOF
+2 / +1 / 0 / –1 / –2
Show / Save / Cancel
Select images / All images / Cancel
On / All Files : On / Cancel
Rotate / Cancel
Protect
Rotation
Resize
×
×
×
2560 1920 / 2048 1536 / 640 480 /
Cancel
Trimming
Dubbing
Copy
–
–
Built-in
Card / Card
Built-in / Cancel
Download from Www.Somanuals.com. All Manuals Search And Download.
233
APPENDIX
I REC Modes
Indicator Lamp Reference
The camera has three indicator lamps: a green operation
lamp, a red operation lamp, and a AF assist light / self-
timer lamp. These lamps light and flash to indicate the
current operational status of the camera.
AF assist
light /
self-timer
lamp
Operation Lamp
Meaning
Green
Lit
Red
Red
Operation lamp
AF assist light /
self-timer lamp
Operational (Power on, recording
enabled)
Pattern 3
Lit
Flash is charging.
Flash charging is complete.
Auto Focus operation was
successful.
Lit
Green
Red
Pattern 3
Lit
Cannot Auto Focus.
Monitor screen is off. / Sleep state
Storing image
Pattern 2
Storing movie data / processing
image data
Pattern 1
* There are three lamp flash patterns. Pattern 1 flashes once per
second, Pattern 2 flashes twice per second, and Pattern 3 flashes
four times per second. The table below explains what each flash
pattern indicates.
Self-timer countdown
(10 to 3 seconds)
Pattern 1
Pattern 2
Self-timer countdown
(3 to 0 seconds)
Pattern 1
Pattern 2
Cannot charge flash.
Memory card problem / Memory card
is unformatted. / BEST SHOT setup
cannot be registered.
Download from Www.Somanuals.com. All Manuals Search And Download.
234
APPENDIX
IMPORTANT!
AF assist
light /
self-timer
• When you are using a memory card, never remove
the card from the camera while the green operation
lamp is flashing. Doing so will cause recorded
images to be lost.
Operation Lamp
Meaning
lamp
Green
Red
Lit
Red
Memory card is locked. /
Cannot create folder. /
Memory is full. / Write error
Low battery alert
Pattern 3
Pattern 3
Pattern 3
Formatting card
Powering down
Download from Www.Somanuals.com. All Manuals Search And Download.
235
APPENDIX
I PLAY Mode
I USB Cradle Indicator Lamps
The USB cradle has two indicator lamps: a [CHARGE]
lamp and a [USB] lamp. These lamps light and flash to
indicate the current operational status of the USB cradle
and camera.
AF assist
light /
self-timer
lamp
Operation Lamp
Meaning
Green
Lit
Red
Red
Operational (Power on, recording
enabled)
One of the following operations is
being performed: delete, DPOF,
image protect, copy, format, power
down, image resizing, image
trimming, after recording, MOTION
PRINT, movie editing
Pattern 3
[CHARGE] lamp
[USB] lamp
[CHARGE] lamp
[USB] lamp
Color Status
Memory card problem / Memory
card is unformatted.
Meaning
Charging
Pattern 2
Color
Red
Status
Lit
Memory card is locked. / Cannot
create folder. / Memory is full.
Low battery alert
Lit
Green
Amber
Red
Lit
Charging complete
Charge standby
Charge error
Pattern 3
Lit
Flashing
Green
Lit
USB connection
Green Flashing Accessing memory
Download from Www.Somanuals.com. All Manuals Search And Download.
236
APPENDIX
Troubleshooting Guide
Symptom
Possible Cause
Action
Power does not turn on.
1) The battery is not oriented correctly.
2) The battery is dead.
1) Orient the battery correctly (page 33).
2) Charge the battery (page 34). If the battery
goes dead soon after being charged, it means
the battery has reached the end of its life and
needs to be replaced. Purchase a separately
available NP-40 rechargeable lithium ion
battery.
Camera suddenly powers
down.
1) Auto Power Off activated (page 45).
2) The battery is dead.
1) Turn power back on.
2) Charge the battery (page 34).
Image is not recorded
when the shutter button is
pressed.
1) The camera is in the PLAY mode.
1) Press [
selected recording mode.
2) Wait until the flash unit finishes charging.
3) Transfer files you want to keep to your
computer and then delete files from image
memory, or use a different memory card.
] (REC) to enter the currently
2) Flash unit is being charged.
3) Memory is full.
Download from Www.Somanuals.com. All Manuals Search And Download.
237
APPENDIX
Symptom
Possible Cause
1) The lens is dirty.
2) The subject is not located in the center of the
focus frame when you compose the image.
3) The subject you are shooting is a type that is
not compatible with Auto Focus operation (page
75).
Action
Auto Focus does not focus
properly.
1) Clean the lens.
2) Make sure the subject is centered in the focus
frame when composing the image.
3) Use manual focus (page 80).
4) You are moving the camera.
4) Mount the camera on a tripod.
The subject is out of focus
in the recorded image.
The image is not focused properly.
When composing the image, make sure the
subject on which you want to focus is located
inside the focus frame.
The flash does not fire.
1) “
” (flash off) is selected as the flash mode.
1) Select a different flash mode (page 64).
2) Charge the battery (page 34).
2) The battery is dead.
3) The camera is in a movie mode (Movie mode,
Short Movie mode, Past Movie mode, MOVIE
BEST SHOT mode).
3) Select a different recording mode (page 52).
4) A scene that selects “
flash mode is selected in the BEST SHOT
mode.
” (flash off) as the
4) Select a different flash mode (page 64) or
BEST SHOT scene (page 93).
Camera powers down
during self-timer
countdown.
The battery is dead.
Charge the battery (page 34).
Download from Www.Somanuals.com. All Manuals Search And Download.
238
APPENDIX
Symptom
Possible Cause
Action
Monitor screen image is
out of focus.
1) You are using the Manual Focus mode and
have not focused the image.
1) Focus the image (page 81).
2) You are trying to use the Macro mode (
when shooting a scenery or portrait shot.
3) You are trying to use Auto Focus or the Infinity
)
2) Use Auto Focus for scenery and portrait shots.
3) Use the Macro mode (
) for close-ups.
mode (
) when shooting a close-up shot.
Recorded images are not
saved in memory.
1) Camera powers down before the save
operation is complete.
2) Removing the memory card before the save
operation is complete.
1) When the battery indicator shows
“
”, charge
the battery as soon as possible (page 34).
2) Do not remove the memory card before the
save operation is complete.
Vertical lines on the
monitor screen.
Recording a very brightly lit subject can cause a
vertical band to appear in the monitor screen
image.
This is a CCD phenomenon known as “vertical
smear”, and does not indicate malfunction of the
camera. Note that vertical smear is not recorded
with the image in the case of a snapshot, but it is
recorded in the case of a movie.
Noise in audio.
Auto Focus, zoom, and aperture operation noise.
Change the focus to Manual Focus or Pan Focus,
which will eliminate Auto Focus operation noise
(pages 79, 80).
Download from Www.Somanuals.com. All Manuals Search And Download.
239
APPENDIX
Symptom
Possible Cause
Action
Out of focus images.
1) The subject is outside the shooting range of the
camera.
1) Record within the allowable shooting range.
2) Subject type is difficult to focus.
2) Try changing the focus mode to Manual Focus
(page 80) or Pan Focus (page 79).
3) Subject is not compatible with Auto Focus.
3) Try pointing the camera at another subject
momentarily. This may correct the problem.
Digital noise in images.
Sensitivity is increased automatically for dark
subjects. Greater sensitivity increases the chance
of digital noise.
Use a light or some other means to illuminate the
subject.
Color of the playback
image is different from the
image on the monitor
screen during recording.
Sunlight or light from another source is shining
directly into the lens during recording.
Position the camera so sunlight does not shine
directly into the lens.
Images are not displayed.
A memory card with non-DCF images recorded
with another camera is loaded in the camera.
This camera cannot display non-DCF images
recorded onto a memory card using another digital
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
240
APPENDIX
Symptom
Possible Cause
Action
All buttons and switches
are disabled.
Circuit problem caused by electrostatic charge,
impact, etc. while the camera was connected to
another device.
Remove the battery from the camera, reinsert it,
and then try again.
Monitor screen is off.
USB communication is in progress.
After confirming that the computer is not
accessing camera memory, disconnect the USB
cable.
1) Camera is not set securely on the USB cradle.
1) Check the connection between the camera and
USB cradle.
Cannot transfer files over a
USB connection.
2) USB cable is not connected securely.
3) USB driver is not installed.
2) Check all connections.
3) Install the USB driver on your computer (page
194).
4) Camera is turned off.
4) Press the [USB] button on the USB cradle.
Download from Www.Somanuals.com. All Manuals Search And Download.
241
APPENDIX
If you have problems installing the USB driver...
You may not be able to install the USB driver properly if you use the USB cable to connect the camera to a computer running
Windows 98SE/98 before installing the USB driver from the bundled CD-ROM, or if you have another type of driver installed.
This will make it impossible for the computer to recognize the digital camera when it is connected. If this happens, you will
need to re-install the camera’s USB driver. For information about how to re-install the USB driver, see the USB driver’s “Read
me” file on the CD-ROM that comes bundled with the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
242
APPENDIX
Display Messages
Battery is low.
The battery is dead.
Check connections! • You are attempting to connect the camera to a
printer while the camera’s USB settings are not
compatible with the USB system of the printer
(page 173).
Cannot correct
image!
Keystone correction cannot be performed for some
reason. The image will be stored as-is, without
correction (page 98).
• You are attempting to connect to a computer that
does not have a USB driver installed (page 194).
Can not find the file. The camera cannot find a image specified by the
slideshow “Images” setting. Specify another image
(page 147).
File could not be
saved because
battery is low.
The battery is dead, so the recorded image could
not be saved.
Cannot register any • You are attempting to save a BEST SHOT scene
more files.
when there are already 999 scenes in the
“SCENE” folder, or a MOVIE BEST SHOT when
there are already 999 scenes in the “MSCENE”
folder (pages 97, 113).
Folder cannot be
created.
This message appears when you try to record an
image while there are 9,999 files stored in the
999th folder. If you want to record more files,
delete files you no longer need (page 158).
• You are attempting to copy a FAVORITE file
when the “FAVORITE” folder already contains
9999 files (page 162).
LENS ERROR
If the lens comes into contact with some obstacle
while it is extending, this message appears, the lens
retracts, and the camera turns off. Take action to
remove the obstacle, and try turning on power again.
Card ERROR
Some problem occurred with the memory card.
Turn off the camera, and remove and then reinsert
the memory card. If the same message appears,
format the memory card (page 179).
Load paper!
The camera is in the Printer mode, and the printer
is out of paper.
IMPORTANT!
Memory Full
Memory is full. If you want to record more files,
delete files you no longer need (page158).
Formatting the memory card deletes all files on
the memory card. Before formatting, try
transferring recoverable files to a computer or
some other storage device.
No Favorites file!
There is no FAVORITE file.
Download from Www.Somanuals.com. All Manuals Search And Download.
243
APPENDIX
Printing Error
One of the following problems occurred during
printing.
This card is not
formatted.
The memory card loaded in the camera is not
formatted. Format the memory card (page 179).
• Printer power off
• Printer internal error
This file cannot be
played.
The image file or audio file is corrupted, or is a
type that cannot be displayed by this camera.
Record Error
Image compression could not be performed during
image data storage for some reason. Record the
image again.
This function cannot You attempted to copy files from built-in memory
be used.
to a memory card loaded in the camera while there
is no memory card in the camera (page 181).
Replenish ink!
The camera is in the Printer mode, and the printer
is running low on ink or is out of ink.
This function is not The function you are trying to perform is not
supported for this
file.
supported for the file on which you are trying to
perform it.
SYSTEM ERROR
The card is locked.
Your camera system is corrupted. Contact your
retailer or a CASIO service center.
The LOCK switch of the SD memory card is locked.
You cannot store images to or delete images from
a memory card that is locked.
There are no files.
There are no files in built-in memory or on the
memory card.
There are no printing There are no DPOF settings specifying images and
images.
the number of copies of each for printing.
Set up DPOF.
Configure the required DPOF settings (page 185).
There is no image to The image or movie whose setup you are trying to
register.
save is not supported by BEST SHOT or MOVIE
BEST SHOT.
Download from Www.Somanuals.com. All Manuals Search And Download.
244
APPENDIX
Data Size
Specifications
• Snapshots
Product ............................... Digital Camera
Model .................................. EX-Z750
File Size
(pixels)
Approximate
Built-in flash
SD Memory
Quality
Image File Size memory 8.3MB Card 256MB*
×
3072 2304
Fine
Normal
Economy
Fine
4.4MB
2.2MB
1.1MB
3.9MB
2.0MB
1.0MB
2.2MB
1.8MB
1.3MB
1.6MB
1.2MB
630KB
1.05MB
710KB
370KB
190KB
140KB
90KB
1 shot
3 shots
6 shots
2 shots
3 shots
7 shots
3 shots
4 shots
5 shots
4 shots
6 shots
11 shots
7 shots
10 shots
20 shots
39 shots
52 shots
83 shots
55 shots
108 shots
207 shots
62 shots
I Camera Functions
×
3072 2048
Image Files Format
(3:2)
Normal
Economy
Fine
118 shots
226 shots
108 shots
131 shots
178 shots
138 shots
184 shots
356 shots
215 shots
319 shots
623 shots
1188 shots
1559 shots
2495 shots
Snapshots ....................... JPEG (Exif Ver.2.2); DCF (Design rule
for Camera File system) 1.0 standard;
DPOF compliant
Movies ............................. AVI (MPEG-4)
Audio ............................... WAV
×
2560 1920
Normal
Economy
Fine
×
2048 1536
Recording Media ............... 8.3MB built-in flash memory
SD Memory Card
Normal
Economy
Fine
MultimediaCard
×
1600 1200
(UXGA)
Normal
Economy
Fine
×
640 480
(VGA)
Normal
Economy
Download from Www.Somanuals.com. All Manuals Search And Download.
245
APPENDIX
• Movies
Delete .................................. Single-file, all files (with protection)
Effective Pixels .................. 7.2 million
Image
Size
(Pixels)
Maximum
Approximate
Data Rate
(Frame Rate)
Approximate
Recording
Time for Built-
in Flash
Approximate
Recording
Time for SD
Memory
Recording
Time Per
File
Imaging Element ................ 1/1.8-inch square pixel color CCD
(Total pixels: 7.41 million)
Memory 8.3 MB Card 256MB
Lens/Focal Distance
HQ
640 480
Until
memory
full
4.0 megabits
per second
(30 frames /
second)
17 seconds
32 seconds
91 seconds
8 minutes
and 32
seconds
Lenses ............................. F2.8 (W) to 5.1(T); f=7.9(W) to
23.7mm (T) (equivalent to
approximately 38 (W) to 114mm (T) for
35mm film)
×
7 lenses in 5 groups, with aspherical
lens
Normal
Until
memory
full
2.1 megabits
per second
(30 frames /
second)
16 minutes
and 14
seconds
×
640 480
Zoom ................................... 3X optical zoom; 8X digital zoom
(24X in combination with optical zoom)
LP
320 240
Until
memory
full
745 kilobits
per second
(15 frames /
second)
45 minutes
and 19
Focusing ............................. Contrast Detection Auto Focus
Focus Modes: Auto Focus, Macro
mode, Pan Focus (movies only),
Infinity mode, manual focus
×
seconds
AF Area: spot, multi, free; AF Assist
Light
* Based on Matsushita Electric Industrial Co., Ltd. products.
Capacity depends on card manufacturer.
* To determine the number of images that can be stored on a
memory card of a different capacity, multiply the capacities in the
table by the appropriate value.
Download from Www.Somanuals.com. All Manuals Search And Download.
246
C
APPENDIX
Approximate Focus Range (from lens surface)
Auto Focus ...................... Snapshots: 40cm to ∞ (1.3´ to ∞)
Movies: 40cm to ∞ (1.3´ to ∞)
Aperture .............................. F2.8/4.0*, auto switching
* Brightness converted
• Using optical zoom causes the
aperture to change.
Macro .............................. Snapshots: 10cm to 50cm (3.9˝ to
19.7˝)
White Balance .................... Auto WB, fixed (6 modes), manual
Movies: 10cm to 50 cm (3.9˝ to 19.7˝)
Infinity Mode .................... ∞
switching
Manual............................. 10cm to ∞ (3.9˝ to ∞)
• Using optical zoom causes the above
ranges to change.
Sensitivity........................... Snapshots: Auto, ISO 50, ISO 100,
ISO 200, ISO 400
Movies: Auto
Exposure Control
Light Metering ................. Multi-pattern, center-weighted, spot by
CCD
Self-timer ............................ 10 seconds, 2 seconds, Triple Self-
timer
Exposure ......................... Program AE, Manual Exposure
Exposure Compensation ..... –2EV to +2EV (1/3EV units)
Built-in Flash
Flash Modes.................... Auto Flash, ON, OFF, Red eye
reduction
Flash Range .................... Wide Angle Optical Zoom:
0.4 to 2.9 meters (1.3´ to 9.5´)
Telephoto Optical Zoom:
Shutter ................................ CCD electronic shutter; mechanical
shutter
Snapshot mode (Auto): 1/8 to 1/1600
second
Manual Exposure / Shutter Speed
Priority AE: 60 to 1/1600 second
Aperture Priority AE: 1 to 1/1600
second
0.4 to 1.6 meters (1.5´ to 5.2´)
(ISO Sensitivity: “Auto”)
* Depends on zoom factor.
• Above shutter speeds do not apply
when using a BEST SHOT scene.
Download from Www.Somanuals.com. All Manuals Search And Download.
247
B
APPENDIX
Recording Functions ....... Snapshot; audio snapshot; macro; self-
timer; BEST SHOT; movie with audio
I Power Requirements
Power Requirements ........ Rechargeable lithium ion battery
(Movie, Short Movie, Past Movie,
MOVIE BEST SHOT) ; voice recording
• Audio recording is monaural.
×
(NP-40)
1
Approximate Battery Life:
Audio Recording Time
Audio Snapshot............... Approximately 30 seconds maximum
The values below indicate the amount of time under the conditions defined
below, until power automatically turns off due to battery failure. They do not
guarantee that you will be able to achieve this level of operation. Low
temperatures shorten battery life.
per image
Voice Recording.............. Approximately 25 minutes with built-in
memory
After Recording ............... Approximately 30 seconds maximum
per image
Operation
Approximate Battery Life
325 shots (160 minutes)
Number of Shots (CIPA Standard)*1
(Operating Time)
Monitor Screen .................. 2.5-inch TFT color LCD
×
115,200 pixels (480 240)
Number of Shots, Continuous
Recording*2 (Operating Time)
740 shots (190 minutes)
Viewfinder .......................... Monitor screen and optical viewfinder
Continuous Snapshot Playback*3
410 minutes
170 minutes
410 minutes
Timekeeping Functions .... Built-in digital quartz clock
Date and Time ................ Recorded with image data
Auto Calendar ................. To 2049
4
*
Continuous Movie Recording
Continuous Voice Recording*5
World Time ...................... City; Date; Time; Summer time;
162 cities in 32 time zones
Supported Battery: NP-40 (Rated Capacitance: 1230mAh)
Storage Medium: SD Memory Card
Input/Output Terminals .... Cradle connector
Microphone ........................ Monaural
Speaker ............................... Monaural
*1 Number of Shots (CIPA Standard)
•
•
•
Temperature: 23°C (73°F)
Monitor Screen: On
Zoom operation between full wide to full telephoto every 30 seconds,
during which two images are recorded, one image with flash; power
turned off and back on every time 10 images are recorded.
Download from Www.Somanuals.com. All Manuals Search And Download.
248
APPENDIX
*2 Continuous Recording Conditions
I Rechargeable Lithium Ion Battery (NP-40)
Rated Voltage .................... 3.7 V
•
•
•
•
Temperature: 23°C (73°F)
Monitor screen: On
Flash: Off
Image recorded every 15 seconds, alternating full wide-angle and full
telephoto zoom
Rated Capacitance ............ 1230 mAh
Operating Temperature
Range .................................. 0°C to 40°C (32°F to 104°F)
*3 Continuous Snapshot Playback Conditions
•
•
Temperature: 23°C (73°F)
Scroll one image about every 10 seconds
×
×
Dimensions ........................ 38.5(W) 38.0(H) 9.3(D) mm
×
×
(1.5˝(W) 1.5˝(H) 0.37˝(D))
*4 Approximate time for continuous movie recording, without using zoom.
*5 Voice recording times are based on continuous recording.
Weight ................................. Approximately 34 g (1.20 oz)
Power Consumption ......... 3.7V DC Approximately 3.4W
I USB Cradle (CA-26)
×
×
Dimensions ........................ 89(W) 58.5(H) 22.4(D) mm
×
×
(3.5˝(W) 2.3˝(H) 0.88˝(D))
(excluding projections; 20.1mm (0.79˝)
at thinnest part)
Input/Output Terminals .... Camera connector; USB port; AC
adaptor terminal (DC IN 5.3V) /
AV output port (Special mini port,
NTSC / PAL)
Weight ................................. Approximately 127 g (4.5 oz)
(excluding battery and accessories)
Power Consumption ......... 5.3V DC Approximately 3.2W
Bundled Accessories........ Rechargeable lithium ion battery (NP-
40); USB cradle (CA-26); Special AC
adaptor; AC power cord; USB cable;
AV Cable; Strap; CD-ROMs (2); Basic
Reference
×
×
Dimensions ........................ 107(W) 33(H) 66(D) mm
×
×
(4.2˝(W) 1.3˝(H) 2.6˝(D))
(excluding projections)
Weight ................................. Approximately 67 g (2.4 oz)
Download from Www.Somanuals.com. All Manuals Search And Download.
249
APPENDIX
I Special AC Adaptor (Inlet Type)
I Special AC Adaptor (Plug-in Type)
(AD-C51G or AD-C52G)
(AD-C51J or AD-C52J)
Power Requirement .......... 100 to 240V AC, 50/60Hz, 83 mA
Output ................................. 5.3V DC, 650 mA
Power Requirement .......... 100 to 240V AC, 50/60Hz, 83mA
Output ................................. 5.3V DC, 650mA
×
×
×
×
Dimensions ........................ AD-C51G:78(W) 20(H) 39(D) mm
Dimensions ........................ AD-C51J: 48(W) 16(H) 69(D) mm
×
×
×
×
(3.1˝(W) 0.8˝(H) 1.5˝(D))
(excluding projections and
cable)
(1.9˝(W) 0.6˝(H) 2.7˝(D))
(excluding projections and
cable)
×
×
×
×
AD-C52G:50(W) 20(H) 70(D) mm
AD-C52J: 50(W) 18(H) 70(D) mm
×
×
×
×
(2.0˝(W) 0.8˝(H) 2.8˝(D))
(excluding projections and
cable)
(2.0˝(W) 0.7˝(H) 2.8˝(D))
(excluding projections and
cable)
Weight ................................. AD-C51G:Approximately 90 g (3.2 oz)
Weight ................................. AD-C51J: Approximately 91 g (3.2 oz)
AD-C52G:Approximately 87 g (3.1 oz)
AD-C52J: Approximately 85 g (3.0 oz)
Download from Www.Somanuals.com. All Manuals Search And Download.
250
B
|
Bel Canto Design Stereo Amplifier REF1000 User Manual
Bissell Carpet Cleaner 16981 User Manual
Bolens Blower YM320BV User Manual
Braun Electric Shaver Pulsonic User Manual
BRK electronic Fire Extinguisher AF400 User Manual
Brother Fax Machine FAX2820 User Manual
Brother Printer PT 2100 User Manual
Bush Hog Brush Cutter 3210 User Manual
Bushnell Battery Charger PP1010 User Manual
Cisco Systems Conference Phone CP9951CCAMK9 User Manual