Casio Digital Camera EX Z35 User Manual

E
Digital Camera  
User’s Guide  
Thank you for purchasing this CASIO product.  
• Before using it, be sure to read the precautions contained in this User’s Guide.  
• Keep the User’s Guide in a safe place for future reference.  
• For the most up-to-date information about this product, visit the official EXILIM  
Website at http://www.exilim.com/  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Read this first!  
• The contents of this manual and the bundled Basic Reference are subject to  
change without notice.  
• The contents of this manual have been checked at each step of the production  
process. Feel free to contact us if you notice anything that is questionable,  
erroneous, etc.  
• Any copying of the contents of this User’s Guide, either in part or its entirety, is  
forbidden. Except for your own personal use, any other use of the contents of this  
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden  
under copyright laws.  
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost  
profits suffered by you or any third party due to the use or malfunction of this  
product.  
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost  
profits, or claims by third parties arising out of the use of Photo Transport or  
YouTube Uploader for CASIO.  
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost  
profits caused by loss of memory contents due to malfunction, repair, or any other  
reason.  
• Note that the example screens and product illustrations shown in this User’s Guide  
may differ somewhat from the screens and configuration of the actual camera.  
LCD Panel  
The liquid crystal panel of the monitor screen uses high-precision technology that  
provides a pixel yield in excess of 99.99%. This means that some very small number  
of pixels may not light or may remain lit at all times. This is due to the characteristics  
of the liquid crystal panel, and does not indicate malfunction.  
Take a few test shots  
Before shooting your final image, shoot a test shot to ensure that the camera is  
recording correctly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
 
Contents  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Using DPOF to Specify Images to be Printed and  
the Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82  
Transferring Images Automatically and Managing Them  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Selecting the Screen Aspect Ratio and  
Video Output System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Video Out) . 112  
Computer System Requirements  
for Bundled Software . . . . . . . . . . . . . . . . . . . . . . . . .(Bundled CD-ROM) . 127  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
General Guide  
The numbers in parentheses indicate the pages where each item is explained.  
. Camera  
Front  
Back  
8 9 bk  
1 2 3 4  
bl  
[
]
[
[
]
]
[
]
[
]
SET  
5
br bq bp bo bn bm  
7 6  
[0] (movie) button  
(page 45)  
Control button  
([8] [2] [4] [6])  
Zoom controller  
9
bk  
bp  
1
[r] (REC) button  
(pages 21, 23)  
Strap hole (page 2)  
[SET] button (page 29)  
[BS] button (page 49)  
[MENU] button  
(pages 27, 29, 33, 52,  
[p] (PLAY) button  
(pages 21, 26)  
Monitor screen  
Shutter button (page 23)  
[ON/OFF] (Power)  
(page 21)  
Flash (page 33)  
Microphone  
(pages 46, 77)  
Lens  
Front lamp (page 59)  
Back lamp  
2
3
bl  
bm  
bn  
bo  
bq  
br  
4
5
(page 52)  
6
7
8
Bottom  
Battery/memory card slots  
bs  
USB/AV port (pages 70, 80, 88, 97)  
Connector cover  
Speaker  
Tripod hole  
Use this hole when attaching to a tripod.  
bt  
ck  
cl  
cm  
bs  
cmcl  
ck bt  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
 
. Charger Unit  
+
- Contacts  
1
2
3
1
[CHARGE] Lamp  
AC jack  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Monitor Screen Contents  
The monitor screen uses various indicators, icons, and values to keep you informed  
of the camera’s status.  
• The sample screens in this section are intended to show you the locations of all the  
indicators and figures that can appear on the monitor screen in various modes.  
They do not represent screens that actually appear on the camera.  
. Snapshot Recording  
Focus mode (page 54)  
Continuous shutter (page 58)  
Self-timer (page 59)  
Panel : Off  
1
2
3
4
5
6
7
bk1bo2345687  
Recording mode (page 23)  
Image deterioration indicator (page 43)  
Metering mode (page 66)  
Remaining snapshot memory capacity  
(page 137)  
Snapshot image size (page 30)  
Snapshot image quality (page 64)  
Flash (page 33)  
Face detection (page 35)  
Anti Shake (page 36)  
ISO sensitivity (page 37)  
White balance setting (page 37)  
Exposure compensation (page 39)  
easy Mode (page 40)  
9
bm  
cl  
cm  
bn  
bt  
bs  
br  
8
9
bk  
bl  
bm  
bn  
bo  
bp  
bq  
br  
bs  
bt  
ck  
cl  
cm  
ck  
bp  
Panel : On  
12345678 9  
bk  
bl  
bm  
bn  
bo  
bp  
bq  
cm  
cl  
Date/time (page 42)  
Shutter speed  
Aperture value  
Battery level indicator (page 17)  
Histogram (page 114)  
ck  
bnbtbsbr  
Focus frame (pages 24, 60)  
NOTE  
• If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not  
correct, the setting will turn orange when you half-press the shutter button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
 
easy Mode  
bk3  
7
8
br  
cm  
ck  
. Movie Recording  
Recording mode (page 45)  
Remaining movie memory capacity (page 45)  
Focus mode (page 54)  
White balance setting (page 37)  
Exposure compensation (page 39)  
Battery level indicator (page 17)  
Histogram (page 114)  
Panel : Off  
1
2
3
4
5
6
7
8
34  
1
2
8
7
6
Movie recording time (page 45)  
5
Panel : On  
3
1
2
8
4
5
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
. Snapshot Viewing  
File type  
1
2
3
4
5
6
7
8
9
bk  
bl  
bm  
bn  
bo  
bp  
bq  
12  
3
Protect indicator (page 74)  
Folder name/file name (page 102)  
Snapshot image quality (page 64)  
Snapshot image size (page 30)  
ISO sensitivity (page 37)  
Aperture value  
Shutter speed  
Date/time (page 42)  
Metering mode (page 66)  
White balance setting (page 37)  
Flash (page 33)  
4
5
bq  
bp  
6
7
8
9
bo  
bnbmblbk  
Recording mode  
Battery level indicator (page 17)  
Histogram (page 114)  
Exposure compensation (page 39)  
. Movie Playback  
File type  
1
2
3
4
5
6
7
1 2  
Protect indicator (page 74)  
Folder name/file name (page 102)  
Movie recording time (page 68)  
Movie image quality (page 65)  
Date/time (page 42)  
3
4
5
Battery level indicator (page 17)  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
   
Quick Start Basics  
What is a digital camera?  
A digital camera stores images on a memory card, so you can record and  
delete images a countless number of times.  
Record  
Delete  
Play  
You can use the images you record in a variety of different ways.  
Store images on your  
computer.  
Print images.  
Attach images to e-mail.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
   
What you can do with your CASIO camera  
Your CASIO camera is packed with a powerful selection of features and functions to  
make recording of digital images easier, including the following three main functions.  
Face Detection  
Point the camera at a person and it automatically  
detects the person’s face for beautiful portraits  
every time.  
See page 35 for more information.  
Anti Shake  
The camera corrects automatically to minimize  
image blur due to camera movement and high-  
speed subject movement.  
See page 36 for more information.  
BEST SHOT  
Simply select the sample scene you want and the  
camera sets up automatically. Then all you need  
do is press the shutter button for perfect images.  
See page 49 for more information.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
 
First, charge the battery prior to use.  
Note that the battery of a newly purchased camera is not charged. Perform the steps  
under “To charge the battery” to bring the battery to a full charge.  
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-82) or  
an optionally available rechargeable lithium ion battery (NP-80) for power. Never  
try to use any other type of battery.  
To charge the battery  
+
1. Positioning the positive and  
-
negative terminals of the battery  
with those of the charger unit, load  
the battery into the charger unit.  
2. Plug the charger unit into a  
[CHARGE] lamp  
household power outlet.  
About 210 minutes are required to  
reach full charge. The [CHARGE]  
lamp will go out when charging is  
complete. Unplug the power cord  
from the power outlet and then  
remove the battery from the charger.  
Lamp Status  
Description  
Lit Red  
Charging  
Abnormal ambient temperature, charger problem, or  
battery problem (page 123)  
Flashing Red  
Off  
Charging complete  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
     
Other Charging Precautions  
• Use the special charger (BC-81L) to charge the special lithium ion battery (NP-82  
or NP-80). Never use any other type of charger device. Attempting to use a  
different charger can result in an unexpected accident.  
• A battery that is still warm due to normal use may not charge fully. Give the battery  
time to cool before charging it.  
• A battery discharges slightly even when it is not loaded in the camera. Because of  
this, it is recommended that you charge the battery immediately before you need to  
use it.  
• Charging the camera’s battery may cause interference with TV and radio reception.  
If this happens, plug the charger into an outlet that is further away from the TV or  
radio.  
• Actual charging time depends on current battery capacity and charging conditions.  
To load the battery  
1. Open the battery cover.  
1
Slide the battery cover slider towards OPEN and  
then open it as indicated by the arrows in the  
illustration.  
2
2. Load the battery.  
Stopper  
With the EXILIM logo on  
the battery facing upwards  
(in the direction of the  
monitor screen), hold the  
stopper next to the battery  
in the direction indicated  
by the arrow as you slide  
Battery contacts  
the battery into the  
camera. Press the battery  
in until the stopper  
EXILIM logo  
Back  
Front  
secures it in place.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
   
3. Close the battery cover.  
Close the battery cover and then shift the slider  
towards LOCK.  
2
• For information about how to replace the battery,  
see page 123.  
1
Checking Remaining Battery Power  
As battery power is consumed, a battery indicator on the monitor screen indicates  
remaining power as shown below.  
Remaining Power  
Battery Indicator  
Indicator Color  
High  
Low  
*
*
*
*
Cyan  
*
Amber  
Red  
*
Red  
indicates battery power is low. Charge the battery as soon as possible.  
Recording is not possible when is indicated. Charge the battery immediately.  
• The level shown by the battery indicator may change when you switch between the  
REC mode and PLAY mode.  
• The camera date and time display will not be correct if the camera is left for about  
two days with no power supplied while the battery is dead. If this happens, load  
new battery and then set the correct time and date (page 109).  
• See page 141 for information about battery life and memory capacity.  
Battery Power Conservation Tips  
• When you do not need to use the flash, select ? (flash off) for the flash setting  
• Enable the Auto Power Off and the Sleep features to protect against wasting  
battery power when you forget to turn off the camera (pages 110, 111).  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
   
Configuring Basic Settings the First Time You Turn On the  
Camera  
The first time you load a battery into the camera, a screen appears for configuring the  
display language, date, and time settings. Failure to set the date and time correctly  
will cause the wrong date and time data to be recorded with images.  
IMPORTANT!  
• A screen for language selection will not appear in step 2 of the procedure below if  
you purchased a camera intended for the Japanese market. To change the display  
language from Japanese in this case, use the procedure under “Specifying the  
Display Language (Language)” (page 110). Note that a version of this manual in  
the language you select may not be included with a camera intended for the  
Japanese market.  
• Camera models sold in certain geographic areas may not support display language  
selection.  
[ON/OFF] (Power)  
1. Press [ON/OFF] (Power) to turn on  
the camera.  
2. Use [8], [2], [4], and [6] to select  
[
]
SET  
[BS]  
the language you want and then  
press [SET].  
3. Use [8] and [2] to select a date style and then press [SET].  
Example: July, 10, 2012  
YY/MM/DD * 12/7/10  
DD/MM/YY * 10/7/12  
MM/DD/YY * 7/10/12  
4. Set the date and the time.  
Use [4] and [6] to select the setting you want to  
change and then use [8] and [2] to change it.  
To switch between 12-hour and 24-hour format, press  
[BS].  
5. After setting the date and time, use [4] and [6]  
to select “Apply” and then press [SET].  
If you make a mistake configuring display language, date, or time settings with the  
above procedure, refer to the following pages for information about how to correct  
the settings.  
– Display language: Page 110  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
   
NOTE  
• Each country controls its local time offset and the use of summer time, and so they  
are subject to change.  
• Removing the battery too soon after you set the time and date can cause the date  
and time display to become incorrect. Do not remove the battery for at least 24  
hours after configuring settings.  
Preparing a Memory Card  
Though the camera has built-in memory that can be used to store images and  
movies, you probably will want to purchase a commercially available memory card for  
greater capacity. The camera does not come with a memory card. Images and  
movies recorded while a memory card is loaded are saved to the memory card. When  
no memory card is loaded, images and movies are saved to built-in memory.  
• For information about memory card capacities, see page 137.  
Supported Memory Cards  
– SD Memory Card  
– SDHC Memory Card  
Use one of the above types of memory card.  
To load a memory card  
1. Press [ON/OFF] (Power) to turn off the camera  
1
and then open the battery cover.  
Slide the battery cover slider towards OPEN and  
then open it as indicated by the arrows in the  
illustration.  
2
2. Load a memory card.  
Positioning the memory card so its  
front is facing upwards (in the direction  
of the monitor screen), slide it into the  
card slot all the way in until you hear it  
click securely into place.  
Front  
Front  
Back  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
       
3. Close the battery cover.  
Close the battery cover and then shift the slider  
towards LOCK.  
2
• For information about how to replace the memory  
card, see page 125.  
1
IMPORTANT!  
• Never insert anything besides a supported memory card (page 19) into the memory  
card slot.  
• Should water or any foreign object ever get into the card slot, immediately turn off  
the camera, remove the battery, and contact your retailer or nearest CASIO  
authorized service center.  
To format (initialize) a new memory card  
You need to format a new memory card before using it for the first time.  
1. Turn on the camera and press [MENU].  
2. Select the “Set Up” tab, select “Format” and then press [6].  
3. Use [8] and [2] to select “Format” and then press [SET].  
IMPORTANT!  
• Formatting a memory card that already has snapshots or other files on it, will delete  
its contents. Normally you do not need to format a memory card again. However, if  
storing to a card has slowed down or if you notice any other abnormality, re-format  
the card.  
• Be sure to use the camera to format a memory card. Formatting a memory card on  
a computer and then using it in the camera can slow down data processing by the  
camera. In the case of an SD or SDHC memory card, formatting on a computer can  
result in non-conformity with the SD format, causing problems with compatibility,  
operation, etc.  
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi  
Manager install files to your computer. Do this before formatting the card.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
 
Turning the Camera On and Off  
To turn power on  
To enter the REC mode, press [ON/OFF] (Power) or  
[r] (REC). To enter the PLAY mode, press [p]  
(PLAY).  
The back lamp will light (green) momentarily and the  
camera will turn on. If you are entering the REC mode,  
the lens will extend from the camera at this time.  
• Take care to ensure that nothing is restricting or  
coming into contact with the lens as it extends.  
Holding the lens with your hand so it cannot extend  
creates the risk of malfunction.  
[ON/OFF] (Power)  
Back lamp  
• Pressing [p] (PLAY) while in the REC mode  
switches to the PLAY mode. The lens retracts about  
10 seconds after switching modes.  
• The Sleep function or Auto Power Off (pages 110,  
111) will turn off power automatically if you do not  
perform any operation for a preset amount of time.  
[p]  
(PLAY)  
[r]  
(REC)  
To turn off the camera  
Press [ON/OFF] (Power).  
• You can configure the camera so power does not turn on when you press [r]  
(REC) or [p] (PLAY). You also can configure the camera to turn off when you  
press [r] (REC) or [p] (PLAY) (page 111).  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
     
Holding the Camera Correctly  
Your images will not come out clearly if you move the camera when you press the  
shutter button. When pressing the shutter button, be sure to hold the camera as  
shown in the illustration below, and keep it still by pressing your arms firmly against  
your sides as you shoot.  
Holding the camera still, carefully press the shutter button and take care to avoid all  
movement as the shutter releases and for a few moments after it releases. This is  
especially important when available lighting is low, which slows down the shutter  
speed.  
Horizontal  
Vertical  
Hold the camera so the flash is  
above the lens.  
NOTE  
• Take care that your fingers and the  
strap do not cover any of the areas  
indicated in the illustration.  
Front lamp  
Flash  
• To protect against accidentally  
dropping the camera, attach the  
wrist strap and make sure it is  
around your fingers or wrist while  
you are operating the camera.  
• Never swing the camera around by  
its strap.  
Lens  
Microphone  
Strap  
• The supplied strap is intended for  
use with this camera only. Never  
use it for any other purpose.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
 
To shoot a snapshot  
1. Press [r] (REC) to turn on the camera.  
Snapshot mode icon  
Monitor screen  
Shutter button  
[r] (REC)  
Remaining Snapshot Memory  
Capacity (page 137)  
2. Point the camera  
at the subject.  
You can zoom the  
image, if you want.  
w Wide Angle  
z Telephoto  
Zoom controller  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
 
3. Half-press the shutter button to  
Back lamp  
Focus frame  
focus the image.  
When focus is complete, the camera  
will beep, the back lamp will light  
green, and the focus frame will turn  
green.  
When you half-press the shutter button, the  
camera automatically adjusts exposure and  
focuses on the subject it is currently pointed  
at. Mastering how much pressure is required  
for a half-press and a full-press of the shutter  
button is an important technique for good-  
looking images.  
Half-press  
Press lightly  
until the  
button stops.  
• The focus frame in the screen shots  
included in this manual is shown at ß.  
Note that you can change the form of the  
focus frame, if you want (page 57).  
Beep, beep (Image is in focus.)  
4. Continuing to keep the camera still, press the shutter button the rest of  
the way down.  
This records the snapshot.  
Recording a Movie  
Full-press  
[0] (Movie)  
Press [0] (Movie) to start  
movie recording. Press  
[0] (Movie) again to stop  
movie recording. See  
page 45 for details.  
Snap (Image is recorded.)  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
   
. If the image does not focus...  
If the focus frame stays red and the back lamp is flashing green, it means that the  
image is not in focus (because the subject is too close, etc.). Re-point the camera at  
the subject and try to focus again.  
. If the subject is not in the center of the frame...  
“Focus lock” (page 56) is the name of a technique you can use when you want to  
shoot an image in which the subject to be focused on is not within the focus frame in  
the center of the screen.  
. To track the movement of a moving subject  
Half-press the shutter button to follow and focus automatically on a moving subject.  
See “O Tracking” (page 60) for more information.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Viewing Snapshots  
Use the following procedure to view snapshots on the camera’s monitor screen.  
• For information about how to play back movies, see page 68.  
1. Press [p] (PLAY) to enter the  
[p] (PLAY)  
PLAY mode.  
• This will display one of the snapshots  
currently stored in memory.  
• Information about the displayed  
snapshot also is included (page 12).  
• You also can clear the information to  
view only the snapshot (page 114).  
• You can zoom in on the image by  
sliding the zoom controller towards z (page 69). If you are recording a  
snapshot that is very important to you, it is recommended that you zoom the  
image and check its details after recording it.  
2. Use [4] and [6] to scroll between images.  
• Holding down either button scrolls at high speed.  
[6]  
[6]  
[4]  
[4]  
NOTE  
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is  
displayed will switch directly to the REC mode.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
   
Deleting Images  
If memory becomes full, you can delete images you no longer need to free up storage  
and record more images.  
IMPORTANT!  
• Remember that a file (image) delete operation cannot be undone.  
• Deleting an audio snapshot (page 76) deletes both the snapshot and the audio file.  
To delete a single file  
1. Press [p] (PLAY) to enter the PLAY mode and then  
press [2] (  
).  
2. Use [4] and [6] to scroll through the files until the one you want to  
delete is displayed.  
3. Use [8] and [2] to select “Delete” and then press [SET].  
• To delete other files, repeat steps 2 and 3.  
• To exit the delete operation, press [MENU].  
To delete all files  
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] (  
).  
2. Use [8] and [2] to select “Delete All Files” and then press [SET].  
3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files.  
This will cause the message “There are no files” to appear.  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
       
Snapshot Shooting Precautions  
Operation  
• Never open the battery cover while the back lamp is flashing green. Doing so can  
result in the image you just shot being saved incorrectly, damage to other images  
stored in memory, malfunction of the camera, etc.  
• If unwanted light is shining directly onto the lens, shade the lens with your hand  
when shooting an image.  
Monitor Screen when Shooting Snapshots  
• Subject brightness conditions can cause monitor screen response to slow and can  
cause digital noise in the monitor screen image.  
• The image that appears on the monitor screen is for image composition. The actual  
image will be recorded at the quality set for the image quality setting (page 64).  
Shooting Indoors under Fluorescent Lighting  
• Minute flickering of fluorescent lighting can affect the brightness or color of an  
image.  
Auto Focus Restrictions  
• Any of the following can make proper focus impossible.  
– Solid color wall or other very low contrast subject  
– Strongly back lit subject  
– Very shiny subject  
– Blinds or other subject with a repeating horizontal pattern  
– Multiple subjects at varying distances from the camera  
– Subject in a dark location  
– Camera movement while shooting  
– Fast-moving subject  
– Subjects outside the focus range of the camera  
• If you cannot focus properly, try using focus lock (page 56) or Manual Focus (page  
54).  
Quick Start Basics  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
     
Snapshot Tutorial  
Using the Control Panel  
The Control Panel can be used to configure camera settings.  
1. In the REC mode, press [SET].  
[8] [2] [4] [6]  
This will cause a Control Panel to appear along the right  
side of the monitor screen. The settings available for the  
currently selected Control Panel also appear. You can  
use the control panel to configure various camera  
settings.  
• If “On” is selected for the Panel setting (page 105), the  
Control Panel is always displayed along the right side  
of the monitor screen.  
[SET]  
2. Use [8] and [2] to select the setting you want to change.  
Available settings  
Control Panel  
Image size/Quality* (pages 30, 64)  
Flash (page 33)  
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
Face detection (page 35)  
Anti shake (page 36)  
ISO sensitivity (page 37)  
White balance (page 37)  
EV shift (page 39)  
easy Mode (page 40)  
Date/Time (page 42)  
* Snapshot image quality cannot be changed using the Control Panel.  
3. Use [4] and [6] to change the setting.  
4. If you want to configure another setting, repeat steps 2 and 3.  
5. After all of the settings are the way you want, press [SET].  
This will apply the settings and return to the REC mode.  
NOTE  
• You also can configure settings other than those listed above (page 52).  
• The Control Panel cannot be displayed while an easy Mode, For YouTube, or  
Voice Recording Operation is in progress.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
29  
     
Changing the Image Size (Size)  
. Pixels  
A digital camera image is a collection of small  
dots called “pixels”. The more pixels there are  
in an image, the more detail there will be.  
However, you generally can do with fewer  
pixels when printing an image (L size) through  
a print service, attaching an image to e-mail,  
when viewing the image on a computer, etc.  
Pixel  
. About image sizes  
The size of an image indicates how many pixels it contains, and is expressed as  
x
horizontal pixels vertical pixels.  
x
8M (3264 2448) size image =  
Approximately 8 million pixels  
3264*  
x
VGA (640 480) size image =  
Approximately 300,000 pixels  
640*  
* Unit: pixels  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
30  
 
Image Size Selection Tips  
Note that larger images have more pixels, so they take up more memory space.  
More detail, but takes up more memory. Best  
when you plan to print large-size prints (such  
as A3 size).  
Large Number  
of Pixels  
Less detail, but takes up less memory. Best  
when you want to send images by e-mail,  
etc.  
Small Number  
of Pixels  
• For information about image size, image quality, and number of images that can be  
stored, see page 137.  
• For information about movie image size, see page 65.  
• For information about resizing existing snapshots, see page 75.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
31  
. To select the image size  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the top Control Panel option (Image Size).  
3. Use [4] and [6] to select an image size and then press [SET].  
Suggested  
Image Size  
(Pixels)  
Print Size and  
Application  
Description  
12M  
(4000 3000)  
Poster Print  
Poster Print  
HDTV  
x
3:2  
Good detail for better clarity even for images  
cropped (page 76) from the original  
x
(4000 2656)  
16:9  
(4000 2240)  
x
8M  
A3 Print  
x
(3264 2448)  
Good detail  
5M  
A4 Print  
x
(2560 1920)  
3M  
Best when preserving memory capacity is  
relatively more important than image quality.  
x
3.5" 5" Print  
x
(2048 1536)  
Image files are smaller, which is better when  
attaching images to e-mail. However, images are  
relatively coarser.  
VGA  
(640 480)  
E Mail  
x
• The initial factory default image size setting is “12M”.  
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the  
standard aspect ratio of print paper.  
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an  
aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of  
television screens of the past. Your camera can record images that are compatible  
with the aspect ratio an HDTV screen.  
• You should regard the print paper sizes suggested here as guidelines only (200 dpi  
print resolution).  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
32  
 
Using Flash (Flash)  
1. In the REC mode, press [2] (  
) to  
Flash  
select the flash setting you want.  
Each press of [2] (  
) cycles through  
the available flash settings.  
• If “On” is selected for the Panel setting  
(page 105), you can change the flash  
setting by pressing [2] (  
using [4] and [6] to select the setting,  
) once,  
[2] (  
)
and then pressing [SET].  
Flash fires automatically in accordance with exposure  
(amount of light and brightness) conditions.  
>
?
Auto Flash  
Flash Off  
Flash does not fire.  
Flash always fires. This setting can be used to brighten a  
subject that normally comes out dark due to daylight or  
backlight (daylight synchro flash).  
<
¥
Flash On  
Red Eye  
Flash fires automatically. This type of flash can be used to  
reduce the chance of redness in the subject’s eyes.  
2. Press the shutter button to shoot.  
Back lamp  
Flashes orange while the flash is charging to  
indicate that image recording is disabled.  
• You will not be able to take another flash  
snapshot until the lamp stops flashing orange,  
which indicates that charging is complete.  
< indicates the flash will fire.  
• For information about Flash Range, see page 140.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
33  
   
NOTE  
• Take care so your fingers and the strap do not block the flash.  
• The desired effect may not be obtained when the subject is too far away or too  
close.  
• Flash charging time (page 140) depends on operating conditions (battery  
condition, ambient temperature, etc.)  
• Shooting with flash turned off when lighting is dim results in a slow shutter speed,  
which can cause image blur due to camera movement. Under such conditions,  
secure the camera with a tripod, etc.  
• With red eye reduction, the flash is fired automatically in accordance with  
exposure. It does not fire in areas where lighting is bright.  
• The presence of outdoor sunlight, fluorescent lighting, or some other light source  
can cause abnormal image colors.  
• Select ? (Flash Off) for the flash setting when shooting in areas where flash  
photography is prohibited.  
Red-eye Reduction  
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the  
eyes of people who are in the image. This is caused when the light from the flash  
reflects off of the retina of the eye. When red-eye reduction is selected as the flash  
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the  
image to close, which reduces the chance of red eye.  
Note the following important points when using red-eye reduction.  
• Red-eye reduction does not work unless the people in the image are looking  
directly at the camera (flash).  
• Red-eye reduction may not work very well if the subjects are located far away from  
the camera.  
Other Useful Flash Features  
• Changing the flash intensity (page 67)  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
C
34  
Using Face Detection (Face Detection)  
The face detection feature adjusts focus and brightness to the faces in the image.  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the third Control Panel option from the top  
(Face Detection).  
3. Use [4] and [6] to select “G Face Detection: On” and then press  
[SET].  
4. Point the camera at the subject(s).  
The camera will detect human faces and display a  
frame around each one.  
5. Half-press the shutter button.  
The camera will focus and the frames around the  
faces it focuses on will turn green.  
6. Press the shutter button the rest of the way down.  
Tips for Best Face Detection Results  
• The camera performs center focus if it cannot detect a face.  
• Always make sure that Auto Focus (AF) is selected as the focus mode when  
shooting with face detection.  
• Face detection may take a bit longer when you hold the camera sideways.  
• Detection of the following types of faces is not supported.  
– Face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade  
– A profile or a face that is at an angle  
– A face that is very far away and small, or very close and large  
– A face in an area that is very dark  
– The face of a pet or some other non-human subject  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
35  
 
IMPORTANT!  
• Face detection cannot be used in combination with any of the following features.  
– Some BEST SHOT scenes (For YouTube, Voice Recording)  
– easy Mode  
– Movie Recording  
• The following functions are disabled when shooting with face detection.  
– Multi AF, Tracking AF  
Reducing the Effects of Camera and Subject Movement  
(Anti Shake)  
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject  
movement or camera movement when shooting a moving subject using telephoto,  
when shooting a fast-moving subject, or when shooting under dim lighting conditions.  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the fourth Control Panel option from the top  
(Anti Shake).  
3. Use [4] and [6] to select the setting you want and then press [SET].  
Auto  
Off  
Minimizes the effects of hand and subject movement.  
Turns off Anti Shake settings  
NOTE  
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen  
when you half-press the shutter button while “Auto” is selected. These values will  
appear briefly, however, in the preview image that is displayed immediately after  
you shoot a snapshot.  
• If the flash fires, the Anti Shake icon S will remain on the display, even though  
Anti Shake does not function during flash photography.  
• The ISO sensitivity setting (page 37) must be “AUTO” for Anti Shake to work.  
• Shooting with Anti Shake can cause an image to appear somewhat coarser than  
normal and can cause slight deterioration of image resolution.  
• Anti Shake may not be able to eliminate the effects of camera or subject movement  
when movement is severe.  
• Anti Shake is disabled during movie recording.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
C
36  
   
Specifying ISO Sensitivity (ISO)  
ISO sensitivity is a measure of sensitivity to light.  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the fifth Control Panel option from the top  
(ISO Sensitivity).  
3. Use [4] and [6] to select the setting you want and then press [SET].  
AUTO  
Adjusts sensitivity automatically according to conditions  
ISO 80  
Lower sensitivity  
Slow shutter speed  
Less noise  
ISO 100  
ISO 200  
ISO 400  
ISO 800  
ISO 1600  
Fast shutter speed  
(Set for shooting in  
dimly lit areas.)  
Some coarseness  
(increased digital  
noise)  
Higher sensitivity  
• “AUTO” ISO sensitivity always is applied for movies, regardless of the current  
ISO sensitivity setting.  
Adjusting White Balance (White Balance)  
You can adjust white balance to match the source of light available where you are  
shooting and avoid the blue cast that results when shooting outdoors when it is  
cloudy, and the green cast that results when shooting under fluorescent lighting.  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the sixth Control Panel option from the top  
(White Balance).  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
37  
   
3. Use [4] and [6] to select the shooting condition you want and then  
press [SET].  
¤
Auto WB  
Daylight  
Configures the camera to adjust white balance automatically  
For shooting outdoors on a clear day  
For shooting outdoors on an overcast rainy day, in the  
shade, etc.  
'
Overcast  
Shade  
For shooting on a clear day in the shade of trees or buildings  
For shooting under white or day white fluorescent lighting  
Day White  
Fluorescent  
Daylight  
Fluorescent  
For shooting under daylight fluorescent lighting  
For shooting under light bulb lighting  
«
Tungsten  
For configuring the camera manually to suit a particular light  
source.  
Select “· Manual WB”.  
1
2
Blank white paper  
Under the lighting conditions you  
plan to use when shooting, point the  
camera at a blank white piece of  
paper so it fills the entire monitor  
screen and then press the shutter  
button.  
·
Manual WB  
Press [SET].  
3
The white balance setting is retained even if you turn off the  
camera.  
• When Auto WB” is selected for the white balance setting, the camera  
automatically determines the white point of the subject. Certain subject colors  
and light source conditions can cause problems when the camera tries to  
determine the white point, which makes proper white balance adjustment  
impossible. If this happens, select the white balance setting that matches your  
shooting conditions (Daylight, Overcast, etc.)  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
38  
Correcting Image Brightness (EV Shift)  
You can manually adjust an image’s exposure value (EV value) before shooting it.  
• Exposure Compensation Range: –2.0EV to +2.0EV  
• Unit: 1/3EV  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the third Control Panel option from the  
bottom (EV Shift).  
3. Use [4] and [6] to adjust the exposure compensation value.  
[6]: Increases the EV value. A higher EV  
value is best for light-colored subjects  
and backlit subjects.  
[4]: Decreases the EV value. A lower EV  
value is best for dark-color subjects and  
for shooting outdoors on a clear day.  
To cancel exposure compensation, change  
the EV value to 0.0.  
Exposure compensation value  
4. Press [SET].  
This applies the exposure compensation  
value. The exposure compensation value you  
set remains in effect until you change it or turn  
off the camera (which causes it to revert to “0.0”).  
NOTE  
• When shooting under very dark or very bright conditions, you may not be able to  
obtain satisfactory results even after performing exposure compensation.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
39  
   
Using the easy Mode  
The easy mode eliminates troublesome setups and simplifies snapshot recording.  
This mode is recommended for those who are new to digital imaging.  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the second Control Panel option from the  
bottom (easy Mode).  
|
3. Use [4] and [6] to select “  
On” and then press [SET].  
This enters the easy mode.  
4. Focus the image.  
While the focus frame is aligned with the subject, half-press the shutter button.  
5. Shoot the image.  
When the image is focused, press the shutter button the rest of the way.  
This records the snapshot.  
. Using the easy Menu  
The easy menu contains flash, self-timer, and image size settings, plus an item for  
exiting the easy mode.  
While the camera is in the easy mode, all the other settings (besides Flash, Self-  
timer, Image Size, and easy Mode) on the REC tab menu (page 128) and Quality tab  
menu (page 128) are fixed at preset optimum values. Any settings you configured on  
these tabs are not used in the easy mode.  
IMPORTANT!  
• To use the Set Up tab menu (page 129), you need to exit the easy mode. To do  
this, select the “easy Mode” item in step 2 of the following procedure, and then  
l
select  
do.  
in step 3. After that, you can use the Set up tab menu as you normally  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
40  
 
1. Press [MENU].  
The easy menu displays larger text than standard  
menus.  
2. Use [8] and [2] to select the menu item you  
want, and then press [SET].  
3. Use [8] and [2] to select the setting you want, and then press [SET].  
Menu Item:  
Flash  
Available Settings:  
> (Auto Flash)* / < (Flash On) / ? (Flash Off)  
(10-second self-timer) / l*  
1* / % / !  
Self-timer  
Image Size  
easy Mode  
Exit Menu  
k / l*  
Exit the easy menu  
• An asterisk (*) indicates reset default settings.  
• See the following for details.  
– Flash (page 33)  
– Self-timer (page 59)  
– Image Size (page 30)  
• The following are the settings you can select for “easy Mode”.  
Select this  
setting:  
To do this:  
Stay in the easy mode, without switching to another  
recording type  
k
Switch from the easy mode to a standard recording type  
l
• On-screen pop-up help text provides a brief explanation of each setting.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
41  
Changing the Control Panel Date/Time Style  
1. In the REC mode, press [SET].  
2. Use [8] and [2] to select the bottom Control Panel option (Date/Time).  
Use [4] and [6] to select the date or time.  
NOTE  
• You can select either of two display style (page 109) for the date: Month/Day or  
Day/Month.  
• The time is displayed using 24-hour format.  
Shooting with Zoom  
Your camera provides you with 3X optical zoom (that changes the lens focal  
distance), which can be used in combination with digital zoom (that digitally  
processes the center portion of the image to enlarge it) for total zoom capabilities of  
3X to 45.2X. The image deterioration point depends on the image size (page 44).  
1. In the REC mode, slide the zoom controller to zoom.  
w Wide Angle  
z Telephoto  
Zoom controller  
w (Wide Angle) :Reduces the size of the subject and broadens the range.  
z (Telephoto) :Enlarges the subject and narrows the range.  
2. Press the shutter button to shoot the image.  
IMPORTANT!  
• Digital zoom is disabled while date stamping (page 108) is turned on.  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
42  
   
NOTE  
• The higher the digital zoom factor, the coarser the recorded image. Note that the  
camera also has a function that lets you record using digital zoom without image  
deterioration (page 43).  
• Use of a tripod is recommended to protect against image blur due to camera  
movement when shooting with telephoto.  
• Performing a zoom operation changes the lens aperture.  
• Digital zoom only is available during movie recording. You can adjust the optical  
zoom setting before you press the shutter button to start movie recording.  
Optical Zoom and Digital Zoom Switch Point  
If you hold the zoom controller towards z (Telephoto), the zoom operation will stop  
when the optical zoom factor reaches its maximum. Momentarily releasing the zoom  
controller and then holding it again towards z (Telephoto) will switch to digital  
zoom, which you can use to set an even higher zoom factor.  
• During zoom, a zoom bar on the monitor screen shows the current zoom setting.  
Image deterioration indicator  
Focusing range  
(Displayed for Auto Focus, Macro Focus, and Manual  
Focus.)  
Zoom bar  
Undeteriorated image  
quality range  
Deteriorated image  
quality range  
3X to 18.7X  
12X to 45.2X  
Zoom pointer (Indicates current zoom.)  
1X  
Optical/digital zoom switch point  
* 3X optical zoom point  
Image deterioration  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
43  
 
• The image deterioration point  
depends on the image size (page  
30). The smaller the image size,  
the higher the zoom factor you  
can use before reaching the  
Image  
Size  
Maximum  
Zoom Factor  
Undeteriorated  
zoom limit  
12M  
3:2  
12X  
12X  
3X  
3X  
image deterioration point.  
16:9  
8M  
12X  
3X  
• Though digital zoom generally  
causes a deterioration of image  
quality, some digital zoom  
without image deterioration is  
possible with image sizes of “8M”  
and smaller. The range in which  
you can use digital zoom without  
image deterioration is indicated  
on the display. The deterioration  
point depends on the image size.  
14.5X  
18.7X  
23.3X  
45.2X  
3.7X  
4.7X  
5.8X  
18.7X  
5M  
3M  
VGA  
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial  
44  
 
Recording Movie Images and Audio  
To record a movie  
1. Configure the quality setting for the movie (page 65).  
The length of the movie you can record will depend on the quality setting you  
select.  
2. In the REC mode, press [0]  
Remaining recording time  
(page 138)  
(Movie).  
[0] (Movie)  
This will start recording and display  
Y on the monitor screen.  
Movie recording includes monaural  
audio.  
3. Press [0] again to stop  
recording.  
Movie recording also will stop  
automatically if memory becomes full  
before you press [0].  
Recording time  
• The maximum size allowed for a single movie file is 4GB. Movie recording  
stops automatically when a file becomes 4GB.  
Shooting with BEST SHOT  
With BEST SHOT (page 49), you can select the sample scene that matches the type  
of movie you are trying to shoot and the camera will change its setup accordingly, for  
beautiful movies every time. Selecting the BEST SHOT scene named Night Scene,  
for example, will configure the camera so night scenes appear clearer and brighter.  
Download from Www.Somanuals.com. All Manuals SearcRhecoArdnindgDMoovwienImloaagdes. and Audio  
45  
   
NOTE  
• Spending a long time using movie recording will cause the camera to become  
slightly warm to the touch. This is normal and does not indicate malfunction.  
• The camera also records audio. Note the following points  
when shooting a movie.  
– Take care that the microphone is not blocked by your  
fingers, etc.  
– Good recording results are not possible when the camera  
is too far away from what you are trying to record.  
– Operating camera buttons while shooting can cause  
button noise to be picked up in the audio.  
Microphone  
• Shooting a very bright subject can cause a vertical band to  
appear in the monitor screen image. This does not indicate  
malfunction. The band will not be recorded in a snapshot, but will be recorded in  
the case of a movie.  
• Use of certain types of memory cards increase the time it takes to record movies,  
which can cause movie frames to be lost. This condition is indicated by » and Y  
flashing on the monitor screen. To avoid loss of movie frames, use of a memory  
card with a maximum transfer speed of at least 10MB per second is recommended  
• Only digital zoom can be used for zooming during movie recording. Since optical  
zoom is not possible while recording a movie, zoom as required before pressing  
[0] to start recording.  
• The effects of camera movement in an image become more pronounced when you  
shoot close up or with a large zoom factor. Because of this, use of a tripod is  
recommended under these conditions.  
• Auto Focus and Macro Focus become fixed focus while shooting a movie (page  
54).  
Download from Www.Somanuals.com. All Manuals SearcRhecoArdnindgDMoovwienImloaagdes. and Audio  
46  
 
Shooting a Snapshot while Shooting a Movie  
1. While a movie is being recorded, press the shutter button.  
Movie recording continues after the snapshot is recorded.  
NOTE  
• You can use [2] (  
) while shooting a movie to change the flash mode setting.  
• Movie recording is interrupted for a few seconds at the point where a snapshot is  
recorded.  
• Shooting a snapshot during movie recording is not possible while any one of the  
following BEST SHOT scenes is selected.  
For YouTube, Voice Recording  
Recording Audio Only (Voice Recording)  
Voice Recording lets you record audio only, without a snapshot or movie.  
• For information about Voice Recording capacities, see page 138.  
1. In the REC mode, press [BS].  
`
2. Use [8], [2], [4], and [6] to select the  
and then press [SET].  
(Voice Recording) scene  
This causes ` to appear on the monitor screen.  
3. Press the shutter button to start recording.  
Recording time  
• The back lamp flashes green while recording is in  
progress.  
• Pressing [SET] during recording will insert a  
marker into the recording. During playback, you  
will be able to jump to the markers in the  
recording.  
4. Press the shutter button again to stop audio  
Remaining recording time  
recording.  
• To create another audio recording file, repeat  
steps 3 and 4.  
• To turn off Voice Recording, press [BS] and then  
select R (Auto).  
Download from Www.Somanuals.com. All Manuals SearcRhecoArdnindgDMoovwienImloaagdes. and Audio  
47  
   
NOTE  
• You can use [8] (DISP) during audio recording to toggle the monitor screen on  
and off.  
• When monitor screen contents are turned off, selecting the “Voice Recording”  
scene will cause the monitor screen to turn off immediately (page 114).  
About audio data  
• Audio files can be played back on a computer using Windows Media Player or  
QuickTime (pages 90, 99)  
– Audio Data: WAVE/IMA-ADPCM (WAV extension)  
To play back an audio recording  
1. In the PLAY mode, use [4] and [6] to display  
the Voice Recording file you want to play.  
` is displayed in place of an image for a Voice  
Recording file.  
2. Press [SET] to start playback.  
Voice Recording Playback Controls  
Fast forward/fast reverse  
Play/pause  
[4] [6]  
[SET]  
While playback is paused, press [4] or [6] to  
jump to the next marker and then press [SET]  
to resume playback.  
Jump to marker  
Volume adjustment  
Monitor screen on/off  
Playback end  
Press [2] and then press [8] [2]  
[8] (DISP)  
[MENU]  
Download from Www.Somanuals.com. All Manuals SearcRhecoArdnindgDMoovwienImloaagdes. and Audio  
48  
 
Using BEST SHOT  
What is BEST SHOT?  
BEST SHOT provides you with a collection of sample “scenes” that show a variety of  
different types of shooting conditions. When you need to change the setup of the  
camera, simply find the scene that matches what you are trying to achieve, and the  
camera sets up for it automatically. This helps to minimize the chance of ruined  
images due to poor exposure and shutter speed settings.  
Some Sample Scenes  
Portrait  
Scenery  
Night Scene  
Night Scene Portrait  
To shoot an image with BEST SHOT  
1. In the REC mode, press [BS].  
Currently selected scene  
(with boundary)  
This will display a menu of BEST  
SHOT scenes.  
• The initial default selection is R  
(Auto).  
2. Use [8], [2], [4], and [6] to  
move the boundary to the scene  
you want to select.  
[BS]  
Scene name  
• The scene menu has multiple  
pages. Use [8] and [2] to scroll  
between menu pages.  
Scene number  
• You can access information about  
the currently selected scene. See  
page 50 for details.  
• To return to normal snapshot recording, select Scene 1 R (Auto). Pressing  
[MENU] while the scene selection screen or scene information screen is  
displayed will cause the boundary to jump directly to R (Auto).  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
49  
           
3. Press [SET] to configure the camera with the settings for the currently  
selected scene.  
This returns to the REC mode.  
• The settings of the scene you selected remain in effect until you select a  
different scene.  
• To select a different BEST SHOT scene, repeat the above procedure from  
step 1.  
4. Press the shutter button.  
NOTE  
• The BEST SHOT YouTube scene sets up the camera for recording movies that are  
optimized for uploading to YouTube. Movies recorded with the YouTube scene are  
stored in a special folder to make them easy to locate for uploading (page 103).  
Maximum recording time while the YouTube scene is selected is 10 minutes.  
. Using Scene Information Screen  
To find out more about a scene, select it with the boundary  
on the scene selection screen, and then slide the zoom  
controller in either direction.  
• To return to the scene menu, slide the zoom controller  
again.  
• To scroll between scenes, use [4] and [6].  
• To configure the camera with the settings for the  
currently selected scene, press [SET]. To return to the  
scene information screen for the currently selected BEST SHOT scene, press [BS].  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
50  
 
. BEST SHOT Precautions  
• Some scenes like Night Scene and Fireworks result in a slow shutter speed setting.  
Since a slow shutter speed increases the chance of digital noise in the image, the  
camera automatically performs a digital noise reduction process when either of  
these scenes is selected. This means that it will take a bit longer for the image to  
be saved which is indicated by the back lamp flashing green. Do not perform any  
key operation during that time. Also, it is a good idea to use a tripod to avoid image  
blur due to camera movement when shooting at slow shutter speeds.  
• Your camera includes a sample scene that optimizes settings for auction site  
images. Depending on your camera model, the sample scene is named either “For  
eBay” or “Auction”. Images you record using the auction site sample scene are  
stored in a special folder so you can easily find them on your computer (page 103).  
x
When using this feature, image size is fixed at 2M (1600 1200 pixels).  
• High Sensitivity  
– The high sensitivity setting is disabled whenever the camera’s flash fires.  
– High sensitivity may not produce the desired results in very dark conditions.  
– When shooting with slow shutter speeds, use a tripod to protect against blurring  
due to camera movement.  
– Under certain lighting conditions, the camera will perform an automatic noise  
filtering operation to reduce digital noise in the image. This operation causes the  
camera to take longer than normal to save the image and be ready for the next  
shot.  
• BEST SHOT scene images were not shot using this camera.  
• Images shot using a BEST SHOT scene may not produce the results you expected  
due to shooting conditions and other factors.  
• You can modify the camera settings that are made after you select a BEST SHOT  
scene. Note, however, that the BEST SHOT settings revert to their defaults when  
you select another BEST SHOT scene or turn off the camera.  
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT  
51  
Advanced Settings  
The following are menu operations you can use to configure various camera settings.  
• You also can use the Control Panel (page 29) to configure some of the settings that  
appear on the menu screen. Refer to the page references provided in this section  
for information about configuring settings using the Control Panel.  
Using On-screen Menus  
. Example Menu Screen Operation  
Press [MENU] to display the menu screen.  
• Menu contents are different in the REC mode and PLAY mode.  
Example: REC mode menu  
[8] [2] [4] [6]  
[MENU]  
[SET]  
Menu Screen Operation Buttons  
Selects tabs. [6] is also used to display the options available for a  
setting.  
[4] [6]  
[8] [2] Selects a setting option.  
[SET] Registers the selected setting.  
[MENU] Exits the menu screen.  
NOTE  
• Pressing the shutter button while the REC menu screen is displayed will cancel the  
current menu operation and exit the menu screen.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
       
1. In the REC mode, press [MENU].  
This will display the menu screen.  
2. Use [4] and [6] to select the tab where the item you want to configure  
is located.  
3. Use [8] and [2] to select the menu item you  
Example:  
When “Focus” is  
selected on the “REC”  
tab  
want, and then press [6].  
4. Use [8] and [2] to change the setting.  
Tabs  
5. After the setting is the way you want, press  
[SET].  
• Pressing [4] registers the selected setting and  
returns to the menu.  
• To configure settings on another tab after  
pressing [4] to return to the menu, use [8] to  
move the highlighting up to the tabs, and then use  
[4] and [6] to select the tab you want.  
Settings  
. Menu Operations in This Manual  
Menu operations are represented in this manual as shown below. The following  
operation is the same one described under “Example Menu Screen Operation” on  
Use [4] and [6] to select the “REC” tab.  
Procedure  
[r] (REC) * [MENU] * REC Tab * Focus  
Use [8] and [2] to select the “Focus” and  
then press [6].  
Press [r] (REC). Press [MENU].  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
REC Mode Settings (REC)  
Selecting a Focus Mode (Focus)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Focus  
Focus Mode  
Settings Type of Shot  
Approximate Focus Range*1  
Snapshot Movies  
Snapshot  
Movies  
Approximately  
10 cm to 9  
(infinity) (3.9" to 9)  
Q Auto  
Focus  
General  
recording  
2
2
Automatic  
Automatic  
*
*
Approximately  
10 cm to 50 cm  
(3.9" to 19.7")  
´ Macro Close ups  
Fixed  
focal  
point  
Fixed  
distance  
Shooting with a  
relatively wide  
focus range  
*3, *5  
EPan  
Focus  
Fixed  
focal point  
Fixed distance*3, *4  
Scenery and  
) Infinity other distant  
Fixed  
Infinity  
subjects  
W
Manual  
Focus  
When you want  
to focus  
manually  
Approximately 10 cm to 9  
(infinity)*3 (3.9" to 9)  
Manual  
*1 The focus range is the distance from the lens surface.  
*2 During movie recording, the Auto Focus mode is disabled.  
*3 The minimum changes along with the optical zoom setting.  
*4 The distance depends on shooting conditions, and appears on the monitor screen  
when the shutter button is half-pressed.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
     
*5  
(m)  
Normal  
Close Up  
Macro  
Zoom Steps  
Telephoto  
9
Center distance  
0.30 (11.8")  
0.35 (13.8")  
0.40 (15.7")  
0.40 (15.7")  
0.40 (15.7")  
0.45 (17.7")  
0.45 (17.7")  
Z1 (Wide)  
Approx. 0.71 (2.3')  
Approx. 0.94 (3.1')  
Approx. 1.33 (4.4')  
Approx. 1.74 (5.7')  
Approx. 1.95 (6.4')  
Approx. 3.09 (10.1')  
Approx. 3.51 (11.5')  
2
9
3
9
4
9
5
6
9
9
7 (Tele)  
9
NOTE  
• Above values are for reference only.  
For movie macro, the focus range is a few centimeters within the center distance.  
To focus with manual focus  
1. On the monitor screen, compose the image so  
the subject you want to focus on is within the  
yellow boundary.  
2. Watching the image on the monitor screen use  
[4] and [6] to adjust focus.  
• At this time the image that is within the boundary  
will enlarge and fill the monitor screen, which aids  
in focusing. If you do not perform any operation for  
two seconds while the enlarged image is displayed,  
the screen in step 1 will re-appear.  
Yellow boundary  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
NOTE  
• An Auto Macro feature detects how far the subject is from the lens and  
automatically selects either Macro Focus or Auto Focus accordingly.  
• Use of the flash together with Macro Focus can cause the light of the flash to  
become blocked, which may result in unwanted lens shadows in your image.  
• Auto Macro can be used when recording snapshots only.  
• Whenever you perform an optical zoom operation while shooting with Auto Focus,  
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell  
you the focus range, as shown below.  
Example: oo cm to 9  
* oo is the actual focusing range value.  
• The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page  
61) are disabled while Manual Focus is selected as the focus mode.  
Using Focus Lock  
Subject to be focused on  
“Focus lock” is a technique you can use when you want  
to compose an image in which the subject you want to  
focus on is not within the focus frame in the center of the  
screen.  
• To use focus lock, select “U Spot” for the Auto  
Focus area (page 60).  
1. Align the monitor screen’s focus frame with  
the subject you want to focus on and then  
half-press the shutter button.  
Focus frame  
2. Keeping the shutter button half-pressed  
(which maintains the focus setting), move the  
camera to compose the image.  
3. When you are ready to shoot the image,  
press the shutter button the rest of the way  
down.  
NOTE  
• Focus lock also locks exposure (AE).  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56  
 
Changing the Focus Frame Shape (Focus Frame)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Focus Frame  
You can use this procedure to select from among five different shapes, including a  
heart shape, for the focus frame.  
Settings  
ß
¹
¬
μ
NOTE  
• Half-pressing the shutter button will cause the focus frame to change one of the  
shapes shown below.  
Focus successful  
Focus not successful  
• When shooting with face detection or the easy mode, the frame shape is ß.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
 
Using Continuous Shutter (CS)  
Procedure  
[r] (REC) * [MENU] * REC Tab * CS  
While Continuous Shutter is turned on, images are continually recorded until memory  
becomes full, as long as you keep the shutter button depressed.  
Releasing the shutter button stops shooting.  
NOTE  
• With continuous shutter, exposure and focus for the first image are applied for  
successive images as well.  
• Continuous shutter cannot be used in combination with any of the following.  
– Some BEST SHOT scenes (For YouTube, Voice Recording)  
– easy Mode  
– Movie Recording  
• When using a continuous shutter mode, keep the camera still until all recording is  
finished.  
• The continuous shutter rate depends on the current image size and image quality  
settings.  
• The speed of Continuous Shutter depends on the type of memory card loaded in  
the camera and the amount of free space available for storage. When shooting to  
built-in memory, continuous shutter shooting is relatively slow.  
• You cannot use the self-timer in combination with Continuous Shutter.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
 
Using the Self-timer (Self-timer)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Self-timer  
With the Self-timer, pressing the shutter button starts a timer. The shutter is released  
and the image is shot after a fixed amount of time.  
10 sec 10-second Self-timer  
2-second Self-timer  
• When shooting under conditions that slow down the shutter speed,  
you can use this setting to prevent image blur due to camera  
movement.  
2 sec  
Shoots three images: one image 10 seconds after the shutter button is  
pressed, and the next two images as soon as the camera is ready  
after shooting the previous image. How long it takes for the camera to  
get ready to shoot depends on the image size and quality settings,  
whether or not a memory card is loaded in the camera, and the flash  
charge condition.  
(Triple  
Self-timer)  
X3  
Off  
Turns off the Self-timer.  
• The front lamp flashes while the Self-timer countdown  
is in progress.  
• You can interrupt an ongoing Self-timer countdown by  
pressing [SET].  
Front lamp  
NOTE  
• The Self-timer cannot be used together with the following features.  
Continuous Shutter, certain BEST SHOT scene (Voice Recording)  
• The Triple Self-timer cannot be used together with the following feature.  
– BEST SHOT scene (For YouTube)  
– easy Mode  
– Movie Recording  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
 
Shooting with Face Detection (Face Detection)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Face Detection  
For details, see the Control Panel procedure on page 35.  
Reducing the Effects of Camera and Subject Movement  
(Anti Shake)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Anti Shake  
For details, see the Control Panel procedure on page 36.  
Specifying the Auto Focus Area (AF Area)  
Procedure  
[r] (REC) * [MENU] * REC Tab * AF Area  
This mode takes readings of a small area in the center of the image.  
This setting works well with focus lock (page 56).  
U
I
O
Spot  
When you half-press the shutter button while this setting selected,  
the camera will select the optimum Auto Focus area from among nine  
possible areas. The focus frame of the area where the camera  
focuses will be displayed in green.  
Multi  
Half-pressing the shutter button focuses on the subject and causes  
the focus frame to track the movement of the subject.  
Tracking  
U
O
Spot”, “  
I
Tracking”  
Multi”  
Focus frame  
Focus frame  
I
O
• “  
Multi” and “  
Tracking” cannot be selected for the Auto Focus area while you  
are using Face Detection (page 35).  
• Selecting O Tracking” can cause vibration and noise to occur due to lens  
operation while tracking a subject. This does not indicate malfunction.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
C
     
Using the easy Mode (easy Mode)  
Procedure  
[r] (REC) * [MENU] * REC Tab * easy Mode  
For details, see the Control Panel procedure on page 40.  
Assigning Functions to the [4] and [6] Keys (L/R Key)  
Procedure  
[r] (REC) * [MENU] * REC Tab * L/R Key  
You can assign one of the five functions listed below to the [4] and [6] keys.  
Setting  
Metering  
EV Shift  
White Balance  
ISO  
[4]/[6] key operation  
Changes the Metering Mode (page 66)  
Adjusts the EV shift value (page 39)  
Changes the white balance setting (page 37)  
Changes the ISO Sensitivity setting (page 37)  
Sets the self-timer time (page 59)  
Self-timer  
Off  
Cancels [4] and [6] key assignments  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
61  
     
Displaying the On-screen Grid (Grid)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Grid  
The on-screen grid can be displayed on the REC mode  
monitor screen for easy vertical and horizontal alignment  
when composing images.  
Turning Digital Zoom On or Off (Digital Zoom)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Digital Zoom  
You can use this setting to turn digital zoom on or off. When digital zoom is turned off,  
operating the zoom controller zooms the image with optical zoom only.  
Turning on Image Review (Review)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Review  
While Review is turned on, the camera will display a image for about one second  
immediately after you press the shutter button to record it.  
Using Icon Help (Icon Help)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Icon Help  
While Icon Help is turned on, a textual description will appear on the display for  
certain icons when you switch between REC functions.  
Functions Supported by Icon Help  
• REC Mode, Flash, Metering Mode, White Balance, Self-timer, EV Shift  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
         
Configuring Power On Default Settings (Memory)  
Procedure  
[r] (REC) * [MENU] * REC Tab * Memory  
When you turn off the camera, it remembers the current settings of all enabled  
memory items and restores them when you turn it back on. Any memory item that is  
disabled will be returned to its initial default setting whenever you turn off the camera.  
Setting  
Disabled (Initial Default Setting)  
Enabled  
b
BEST SHOT  
Snapshot (Auto)  
Flash  
Auto  
Focus  
AF (Auto Focus)  
White Balance  
ISO  
Auto  
Auto  
AF Area  
Spot  
Setting at  
power off  
Metering  
CS  
Multi  
Off  
Self-timer  
Flash Intensity  
Digital Zoom  
MF Position  
Zoom Position*  
Off  
0
On  
Position before manual focus was selected.  
Full wide  
* Optical zoom setting only.  
• If you turn the camera power off and then back on while the BEST SHOT memory  
item is enabled, all of the other memory items (except for zoom position) are  
initialized to the currently selected BEST SHOT sample scene setup, regardless of  
the enabled/disabled status of the other memory items.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63  
 
Image Quality Settings (Quality)  
Specifying Snapshot Size (Size)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * Size  
For details, see the Control Panel procedure on page 32.  
Specifying Snapshot Image Quality (Quality (Snapshot))  
Procedure  
t
[r] (REC) * [MENU] * Quality Tab *  
Quality  
Fine  
Gives image quality priority.  
Normal  
Normal  
Economy  
Gives number of images priority.  
• The “Fine” setting helps to bring out details when shooting a finely detailed image  
of nature that includes dense tree branches or leaves, or an image of a complex  
pattern.  
• Memory capacity (the number of images you can record) will be affected by the  
quality settings you configure (page 137).  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64  
     
Specifying Movie Image Quality (Quality (Movie))  
Procedure  
[r] (REC) * [MENU] * Quality Tab * » Quality  
Movie image quality is a standard that determines the detail, smoothness, and clarity  
of a movie during playback. Shooting with the high-quality (WIDE) setting will result in  
better image quality, but it also shortens the amount of time you can shoot.  
Image Quality (Pixels)  
Approximate Data Rate  
Frame Rate  
x
848 480 12.5 Megabits/second  
WIDE  
STD  
LP  
30 frames/second  
15 frames/second  
x
640 480 10.6 Megabits/second  
x
320 240 2.7 Megabits/second  
• Memory capacity (Movie recording time you can shoot) will be affected by the  
quality settings you configure (page 138).  
Correcting Image Brightness (EV Shift)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * EV Shift  
For details, see the Control Panel procedure on page 39.  
Controlling White Balance (White Balance)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * White Balance  
For details, see the Control Panel procedure on page 37.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
65  
     
Specifying ISO Sensitivity (ISO)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * ISO  
For details, see the Control Panel procedure on page 37.  
Specifying the Metering Mode (Metering)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * Metering  
The metering mode determines what part of the subject is metered for exposure.  
Multi-pattern metering divides the image into sections and  
measures the light in each section for a balanced exposure reading.  
This type of metering provides error-free exposure settings for a  
wide range of shooting conditions.  
B
Multi  
Center weighted metering concentrates on the center of the focus  
area to measure light. This type of metering is best when you want  
some level of control over contrast.  
N
Weighted  
Center  
Spot metering takes readings at a very small area. Use this  
metering method when you want exposure to be set according to  
the brightness of a particular subject, without being affected by  
surrounding conditions.  
˜
Spot  
• The currently selected metering mode is indicated by an icon on the snapshot  
screen. No icon is displayed when “B Multi” is selected as the metering mode.  
Using Built-in Color Filters (Color Filter)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * Color Filter  
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66  
     
Controlling Image Sharpness (Sharpness)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * Sharpness  
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).  
Controlling Color Saturation (Saturation)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * Saturation  
You can specify one of five saturation settings from +2 (most saturated) to –2 (least  
saturated).  
Adjusting Image Contrast (Contrast)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * Contrast  
You can specify one of five contrast settings from +2 (most contrast between light and  
dark) to –2 (least contrast between light and dark).  
Specifying Flash Intensity (Flash Intensity)  
Procedure  
[r] (REC) * [MENU] * Quality Tab * Flash Intensity  
You can specify one of five flash intensity settings from +2 (strongest) to –2  
(weakest).  
• Flash intensity may not change when the subject is too far away or too close.  
Advanced Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
67  
       
Viewing Snapshots and Movies  
Viewing Snapshots  
See page 26 for the procedure for viewing snapshots.  
Viewing a Movie  
1. Press [p] (PLAY) and then use [4] and [6] to display the movie you  
want to view.  
2. Press [SET] to start playback.  
Movie icon: »  
Recording time  
Image quality  
Movie Playback Controls  
[4] [6]  
Fast forward/  
fast reverse  
• Each press of either button increases the speed of the fast  
forward or fast reverse operation.  
• To return to normal playback speed, press [SET].  
Play/pause  
[SET]  
1 frame forward/ [4] [6]  
back  
• Holding down either button scrolls continuously.  
Press [2] and then press [8] [2].  
• Volume can be adjusted only while movie playback is in  
progress.  
Volume  
adjustment  
Information  
display on/off  
[8] (DISP)  
Slide the zoom controller in the direction of z ([).  
• You can use [8], [2], [4], and [6] to scroll the zoomed  
image on the monitor screen. You can zoom a movie image  
up to 4.5 times normal size.  
Zoom  
Stop playback  
[MENU]  
• Playback may not be possible for movies not recorded with this camera.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
68  
       
Zooming an On-screen Image  
1. In the PLAY mode, use [4] and [6] to scroll through the images until  
the one you want is displayed.  
2. Slide the zoom controller towards z ([) to  
Zoom factor  
zoom.  
Image area  
You can use [8], [2], [4], and [6] to scroll the  
zoomed image on the monitor screen. Slide the zoom  
controller towards w to unzoom the image.  
– If display indicators are turned on, an indicator in  
the lower right corner of the monitor screen shows  
what part of the zoomed image is currently  
displayed.  
– To exit the zoom screen, press [MENU] or [BS].  
– Though the maximum image zoom factor is 8X,  
certain image sizes may not allow zooming up to  
the full 8X.  
Current display area  
Displaying the Image Menu  
1. In the PLAY mode, slide the zoom controller  
towards w (]).  
Boundary  
Use [8], [2], [4] and [6] to move the selection  
boundary around the image menu.  
To view a particular image, use [8], [2], [4], or [6] to  
move the selection boundary to the image you want  
and then press [SET].  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
69  
     
Viewing Snapshots and Movies on a TV Screen  
1. Use an optionally available AV cable (EMC-4A) to connect it to the TV.  
Yellow  
AV cable  
White  
Video Audio  
TV  
AUDIO IN jacks (white)  
VIDEO IN jack (yellow)  
USB/AV port  
Making sure that the  
mark on the AV cable  
connector is towards the lens side, connect the cable  
to the camera.  
• Make sure that you insert the cable connector into the USB/  
AV port until you feel it click securely into place. Failure to  
insert the connector fully can result in poor communication or  
malfunction.  
• Note that even while the connector is fully inserted, you still  
will be able to see the metal part of the connector as shown in  
the illustration.  
2. Turn on the TV and select its video input mode.  
If the TV has more than one video input, select the one where the camera is  
connected.  
3. Press [p] (PLAY) to turn on the camera.  
This will cause an image to appear on the TV screen, without anything appearing  
on the camera’s monitor screen.  
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the  
AV cable is connected.  
• You also can change the aspect ratio of the screen and the video output  
system (page 112).  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70  
   
4. Now you can display images and play back movies as you normally do.  
IMPORTANT!  
• Before connecting to a TV to display images, be sure to configure the camera’s  
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 111).  
• Use the TV’s volume control to adjust the audio output volume.  
NOTE  
• Audio is monaural.  
• Certain TVs may cut off part of the images.  
• All icons and indicators that appear on the monitor screen also appear on the TV  
screen. You can use [8] (DISP) to change the display contents.  
Recording Camera Images to a DVD Recorder or Video Deck  
Use one of the following methods to connect the camera to the recording device  
using an optionally available AV cable.  
– DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.  
– Camera: USB/AV port  
You can play a slideshow of snapshots and movies on the camera and record it on a  
DVD or video tape. When recording images to an external device, use [8] (DISP) to  
clear all indicators from the monitor screen (page 114).  
For information about connecting a monitor to the recording device and about how to  
record, see the user documentation that comes with the recording device you are  
using.  
Viewing Snapshots and Movies  
Download from Www.Somanuals.com. All Manuals Search And Download.  
71  
Other Playback Functions (PLAY)  
This section explains menu items that you can use to configure settings and perform  
other playback operations.  
For information about menu operations, see page 52.  
Playing a Slideshow on the Camera (Slideshow)  
Procedure  
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow  
Start  
Time  
Starts the slideshow.  
Time from the start to the end of the slideshow  
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes  
Amount of time each image remains displayed  
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.  
If you specify a value from 1 to 30 seconds, images change at the  
specified interval, but the audio portion of movies and audio snapshots  
will continue to play until the end.  
When the slideshow reaches a movie file while “MAX” is selected, only  
the first frame of the movie will displayed. Voice Recording files are not  
played back when “MAX” is selected.  
Interval  
Effect  
Turns effect on or off.  
On: Turns on the image change effect and background music.  
Off: No image change effect or background music  
• To stop the slideshow, press [SET]. Pressing [MENU] instead of [SET] stops the  
slideshow and returns to the menu screen.  
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.  
• All button operations are disabled while the slideshow is transitioning from one  
image to another.  
• The time required for transition from one image to another may be longer in the  
case of an image that was not recorded with this camera.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
72  
   
Using Red Eye Correction (Red Eye)  
Procedure  
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Red Eye  
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the  
eyes of people who are in the image. This is caused when the light from the flash  
reflects off of the retina of the eye. Red eye correction corrects the eye colors of  
subjects to their normal colors when red eye occurs while using the flash.  
Correct  
Cancel  
Turns on red eye correction.  
Turns off red eye correction.  
NOTE  
• The original snapshot is retained in memory and not deleted.  
• Red eye correction may not be possible in the case of small faces or profiles.  
• Red eye correction may not produce the desired effect under certain conditions.  
Selecting Images for Printing (DPOF Printing)  
Procedure  
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *  
DPOF Printing  
See page 82 for details.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
73  
   
Protecting a File Against Deletion (Protect)  
Procedure  
[p] (PLAY) * [MENU] * PLAY Tab * Protect  
Protects specific files.  
Use [4] and [6] to scroll through the files  
until the one you want to protect is  
displayed.  
1
Use [8] and [2] to select “On” and then  
press [SET].  
2
On  
An image that is protected is indicated by  
the icon.  
To protect other files, repeat steps 1 and 2.  
To exit the protect operation, press [MENU]. To unprotect a file,  
select “Off” instead of “On” in step 2 above.  
3
Protects all files.  
Use [8] and [2] to select “All Files: On” and then press [SET].  
Press [MENU].  
To unprotect all files, select “All Files: Off” instead of “All Files: On” in  
step 1 above.  
1
2
All Files:  
On  
IMPORTANT!  
• Note that even if a file is protected, it will be deleted if you perform the format  
operation (page 113).  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
74  
   
Rotating an Image (Rotation)  
Procedure  
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation  
1. Use [8] and [2] to select “Rotation” and then press [SET].  
Each press of [SET] will rotate the displayed image 90 degrees left.  
2. When the displayed image is at the orientation you want, press  
[MENU].  
NOTE  
• Note that this procedure does not actually change the image data. It simply alters  
how the image is displayed on the camera’s monitor screen.  
• An image that has been protected or zoomed and movie screen cannot be rotated.  
• The original (unrotated) version of the image will be displayed on the 12-image  
screen.  
Resizing a Snapshot (Resize)  
Procedure  
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize  
You can reduce the size of a snapshot and save the result as a separate snapshot.  
The original snapshot is also retained. You can select resize an image to one of three  
image sizes: 8M, 5M, VGA.  
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of  
4:3, with both sides cut off.  
• The recording date of the resized version of the snapshot will be the same as the  
recording date of the original snapshot.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
75  
     
Cropping a Snapshot (Trimming)  
Procedure  
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming  
You can crop a snapshot to trim parts you do not need,  
and save the result in a separate file. The original  
snapshot is also retained.  
Zoom factor  
Represents  
snapshot area  
Use the zoom controller to zoom the image to the size you  
want, use [8], [2], [4], and [6] to display the portion of  
the image you want to cut out, and then press [SET].  
• The image produced by cropping a 3:2 or 16:9 image  
will have an aspect ratio of 4:3.  
• The recording date of the cropped image will be the  
same as the recording date of the original snapshot.  
Part of snapshot that is  
currently displayed  
Adding Audio to a Snapshot (Dubbing)  
Procedure  
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing  
You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s  
audio whenever you want. You can record up to about 30 seconds of audio for a  
single snapshot.  
1. Press the shutter button to start audio  
recording.  
Remaining recording time  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
76  
       
2. Press the shutter button again to stop audio  
recording.  
• Take care that you do not block the camera’s microphone  
with your fingers while recording.  
• Good recording results are not possible when the camera  
is too far away from what you are trying to record.  
• Your camera supports the following audio data formats.  
– Audio Format: WAVE/IMA-ADPCM (WAV extension)  
• Adding audio (dubbing) is not possible for the following  
types of images.  
Microphone  
– Protected images  
• To delete audio, perform the following operation:  
Dubbing * Delete * [SET] * [MENU].  
IMPORTANT!  
• Note that you cannot restore the original audio of an Audio Snapshot after you  
delete or re-record it.  
To play snapshot audio  
1. In the PLAY mode, use [4] and [6] to scroll through the images until  
the Audio Snapshot you want is displayed.  
An audio snapshot is one that has a ˆ icon.  
2. Press [SET] to start playback.  
Voice Recording Playback Controls  
Fast forward/fast reverse  
Play/pause  
[4] [6]  
[SET]  
Press [2] and then  
press [8] [2].  
Volume adjustment  
Display content switching  
Stop playback  
[8] (DISP)  
[MENU]  
• Audio of an Audio Snapshot also can be played back on a computer using  
Windows Media Player or QuickTime (pages 90, 99).  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
77  
   
Copying Files (Copy)  
Procedure  
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy  
Files can be copied from the camera’s built-in memory to a memory card or from a  
memory card to built-in memory.  
Copies all files from built-in camera memory to a memory card.  
Built-in * Card This option copies all the files in built-in camera memory. It  
cannot be used to copy a single file.  
Copies a single file on the memory card to camera built-in  
camera memory. Files are copied to the folder in built-in  
Card * Built-in memory whose name has the largest serial number.  
Use [4] and [6] to select the file you want to copy.  
Use [8] and [2] to select “Copy” and then press [SET].  
1
2
NOTE  
• You can copy snapshots, movies, audio snapshots, or Voice Recording files you  
recorded with this camera.  
Other Playback Functions (PLAY)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
78  
 
Printing  
Printing Snapshots  
Professional Print Service  
You can take a memory card that contains the images you  
want to print to a professional print service and have them  
printed.  
Printing on a Home Printer  
Printing Images on a Printer with Memory Card Slot  
You can use a printer equipped with a memory card slot to print  
images directly from a memory card. For details, see the user  
documentation that comes with your printer.  
Connecting Directly to a PictBridge Compatible  
Printer  
You can print on a printer that supports PictBridge (page  
80).  
Printing with a Computer  
After transferring the images to your computer, use  
commercially available software to print.  
• You can specify which images you want to print, the number of copies, and date  
stamp settings before printing (page 82).  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
79  
   
Connecting Directly to a PictBridge Compatible Printer  
You can connect the camera directly to a printer that supports PictBridge and print  
images without going through a computer.  
. To set up the camera before connecting to a printer  
1. Turn on the camera and press [MENU].  
2. On the “Set Up” tab, select “USB” and then press [6].  
3. Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].  
. Connecting the Camera to a Printer  
Use the USB cable that  
comes bundled with the  
camera to connect the  
camera to your printer’s USB  
port.  
USB cable  
Large connector  
USB  
• The camera does not  
draw power over the USB  
cable. Make sure the  
camera’s battery is  
USB port  
sufficiently charged before  
connecting.  
USB/AV port  
• Make sure that you insert  
the cable connector into  
the USB/AV port until you  
feel it click securely into  
place. Failure to insert the  
connector fully can result  
in poor communication or  
malfunction.  
Small connector  
Making sure that the  
mark on the USB cable  
connector is towards the lens side, connect the cable  
to the camera.  
• Note that even while the  
connector is fully inserted, you still will be able to see the metal  
part of the connector as shown in the illustration.  
• When connecting the USB cable to a USB port, make sure you  
align the connector correctly with the port.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
80  
     
. To print  
1. Turn on the printer and load paper.  
2. Turn on the camera.  
This will display the print menu screen.  
3. Use [8] and [2] to select “Paper Size”, and  
then press [6].  
4. Use [8] and [2] to select a paper size and then  
press [SET].  
• The following are the available paper sizes.  
x
x
x
x
3.5" 5", 5" 7", 4" 6", A4, 8.5" 11", By Printer  
• Selecting “By Printer” prints using a paper size selected on the printer.  
• See the documentation that comes with your printer for information about  
paper settings.  
5. Use [8] and [2] to specify the print option you want.  
1 Image  
: Prints one image. Select and then press [SET]. Next, use [4] and  
[6] to select the image you want to print.  
DPOF Printing: Prints multiple images. Select and then press [SET]. With this  
option, images will be printed in accordance with DPOF settings  
• To toggle date stamping on and off, press [BS]. The  
date stamp will be printed when “On” is indicated on  
the monitor screen.  
6. Use [8] and [2] to select “Print” and then  
press [SET].  
Printing will start and the message “Busy... Please  
wait...” will appear on the monitor screen. The message will disappear after a  
short while, even though printing is still being performed. Pressing any camera  
button will cause the printing status to re-appear. The print menu screen will re-  
appear when printing is complete.  
• If you selected “1 Image”, you can repeat the procedure from step 5, if you  
want.  
7. After printing is complete, turn off the camera and disconnect the USB  
cable from the printer and camera.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
81  
Using DPOF to Specify Images to be Printed and the Number  
of Copies  
. Digital Print Order Format (DPOF)  
DPOF is a standard that allows you to include image type, number of copy,  
and time stamp on/off information on the memory card with the images.  
After configuring settings, you can use the memory card to print on a home  
printer that supports DPOF or take the memory card to a professional print  
service.  
• Whether or not you will be able to use DPOF settings for printing depends on the  
printer you are using.  
• Some professional print services may not support DPOF.  
. Configuring DPOF Settings Individually for Each Image  
Procedure  
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *  
DPOF Printing * Select images  
1. Use [4] and [6] to scroll through the files until the image you want to  
print is displayed.  
2. Use [8] and [2] to specify the number of copies.  
You can specify a value up to 99. Specify 00 if you do not want to print the image.  
• If you want to include the date in the images, press [BS] so “On” is shown for  
date stamping.  
• Repeat steps 1 and 2 to configure settings for other images, if you want.  
3. Press [SET].  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
82  
   
. Configuring the Same DPOF Settings for All the Images  
Procedure  
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *  
DPOF Printing * All images  
1. Use [8] and [2] to specify the number of copies.  
You can specify a value up to 99. Specify 00 if you do not want to print the image.  
• If you want to include the date in the images, press [BS] so “On” is shown for  
date stamping.  
2. Press [SET].  
DPOF settings are not cleared automatically after printing is complete.  
The next DPOF print operation you execute will be performed using the last DPOF  
settings you configured for the images. To clear DPOF settings, specify “00” for the  
number of copies of all images.  
Tell your print service about your DPOF settings!  
If you take a memory card to a professional print service, be sure to tell them that it  
includes DPOF settings for the images to be printed and the number of copies. If you  
don’t, the print service may print all the images without regard to your DPOF settings,  
or they may ignore your date stamp setting.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
83  
. Date Stamping  
You can use one of the following three methods to include the recording date in the  
printout of an image.  
Configuring camera settings  
Configure DPOF settings (page 82).  
You can turn date stamping on and off each time you print. You can configure  
settings so some images include the date stamp and some don’t.  
Configure the Camera’s Time Stamp setting (page 108).  
• The camera’s Time Stamp setting imprints the date into a snapshot when you  
shoot it, so the date is always included when you print. It cannot be deleted.  
• Do not turn on DPOF date stamping for an image that includes a date  
stamped with the camera’s Time Stamp function. Doing so can cause the two  
stamps to be overprinted.  
Configuring computer settings  
You can use commercially available image management software to date  
stamp images.  
Professional print service  
Request date stamping when ordering prints from a professional print service.  
. Standards Supported by the Camera  
• PictBridge  
This is a standard of the Camera and Imaging Products Association  
(CIPA). You can connect the camera directly to a printer that supports  
PictBridge, and perform image selection and printing using the  
camera monitor screen and controls.  
• Exif Print  
Printing on a printer that supports Exif Print (Exif 2.2) uses  
information about shooting conditions recorded with the image to  
enhance printed image quality. Contact your printer manufacturer  
for information about models that support Exif Print, printer upgrades, etc.  
Printing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84  
 
Using the Camera with a Computer  
Things you can do using a computer...  
You can perform the operations described below while the camera is connected to a  
computer.  
Save images to a  
computer and  
view them there  
• Save images and view them manually  
(USB connection) (pages 87, 96).  
• Transfer images to a computer  
automatically over a wireless LAN for  
viewing (Eye-Fi) (page 100).  
Transfer images  
stored on your  
computer to  
In addition to images, you also can transfer  
screen shot images from your computer to  
the camera (Photo Transport*) (page 93).  
camera memory  
Playback and  
edit movies  
• You can play back movies (pages 90, 99).  
• To edit movies, use commercially  
available software as required.  
* Windows only  
The procedures you need to perform when using the camera with your computer and  
when using the bundled software are different for Windows and the Macintosh.  
• Macintosh users should refer to “Using the Camera with a Macintosh” on page  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
85  
   
Using the Camera with a Windows Computer  
Install the required software in accordance with the version of Windows you are  
running and what you want to do.  
When you want  
to do this:  
See  
page:  
Operating System Version Install this software:  
Save images to Windows 7 /  
a computer and Windows Vista /  
view them there Windows XP /  
Installation not required.  
manually  
Windows 2000  
Installation not required.  
• Windows Media Player,  
which is already installed on  
most computers, can be  
used for playback.  
Windows 7 /  
Windows Vista /  
Windows XP /  
Windows 2000  
• If your computer is running  
Windows 2000 and does  
not have DirectX9.0c or  
higher installed, download  
DirectX from the Microsoft  
DirectX site and install it on  
your computer.  
Play movies  
Windows 7 /  
Windows Vista /  
Windows XP /  
Windows 2000  
Edit movies  
• Use commercial software  
as required.  
Windows 7 /  
Upload movie  
files to YouTube Windows XP (SP2/SP3) / CASIO*  
Windows Vista /  
YouTube Uploader for  
Windows 2000 (SP4)  
Windows 7 /  
Transfer images Windows Vista /  
Photo Transport 1.0*  
to the camera  
Windows XP /  
Windows 2000  
Windows Vista /  
Windows XP (SP2/SP3) / (Not required if already  
Windows 2000 (SP4) installed.)  
Adobe Reader 8  
View the User’s  
Guide  
* YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of  
Windows OS.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
86  
 
. Computer System Requirements for Bundled Software  
Computer system requirements are different for each of the applications. See the  
“Read me” file that comes with each application for details. Information about  
computer system requirements also can be found under “Computer System  
. Precautions for Windows Users  
• Except for Adobe Reader, the bundled software requires Administrator privileges to  
run.  
• Operation on a self-made computer is not supported.  
• Operation may not be possible under certain computer environments.  
Viewing and Storing Images on a Computer  
You can connect the camera to your computer in order to view and store images  
(snapshot and movie files).  
. To connect the camera to your computer and save files  
1. Turn on the camera and press [MENU].  
2. On the “Set Up” tab, select “USB” and then press [6].  
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
87  
   
4. Turn off the camera and  
then use the USB cable  
that comes with the  
USB port  
USB cable  
camera to connect it to  
your computer.  
Large connector  
• The camera does not  
draw power over the USB  
cable. Make sure the  
camera’s battery is  
sufficiently charged  
before connecting.  
USB/AV port  
• Make sure that you insert  
the cable connector into  
the USB/AV port until you  
feel it click securely into  
place. Failure to insert  
the connector fully can  
result in poor  
Small connector  
Making sure that the  
mark on the USB cable  
connector is towards the lens side, connect the  
cable to the camera.  
communication or  
malfunction.  
• Note that even while the  
connector is fully inserted, you still will be able to see the metal  
part of the connector as shown in the illustration.  
• When connecting the USB cable to a USB port, make sure you  
align the connector correctly with the port.  
• Your computer may not be able to recognize the camera if you  
connect via a USB hub. Always connect directly to the  
computer’s USB port.  
5. Turn on the camera.  
6. Windows 7 / Windows Vista users: Click “Start” and then “Computer”.  
Windows XP users: Click “Start” and then “My Computer”.  
Windows 2000 users: Doubleclick “My Computer”.  
7. Double-click “Removable Disk”.  
• Your computer recognizes the memory card loaded in the camera (or built-in  
memory if there is no card) as a removable disk.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
88  
 
8. Right-click the “DCIM” folder.  
9. On the shortcut menu that appears, click “Copy”.  
10. Windows 7 / Windows Vista users: Click “Start” and then  
“Documents”.  
Windows XP users: Click “Start” and then “My Documents”.  
Windows 2000 users: Doubleclick “My Documents” to open it.  
• If you already have a “DCIM” folder in “Documents” (Windows 7 /  
Windows Vista) or “My Documents” (Windows XP / Windows 2000), the next  
step will overwrite it. If you want to keep the existing “DCIM” folder, you need to  
change its name or move it to a different location before performing the next  
step.  
11. Windows 7 users: On the “Documents” “Organize” menu, select  
“Paste”.  
Windows Vista users: On the “Documents” “Edit” menu, select  
“Paste”.  
Windows XP / Windows 2000 users: On the “My Documents” “Edit”  
menu, select “Paste”.  
This will paste the “DCIM” folder (and all the image files it contains) into your  
“Documents” (Windows 7 / Windows Vista) or “My Documents” (Windows XP /  
Windows 2000) folder. You now have a copy of the files that are in camera  
memory on your computer.  
12. After you finish copying images, disconnect the camera from the  
computer.  
Windows 7, Windows Vista, Windows XP  
On the camera, press [ON/OFF] (Power) to turn off the camera. After making  
sure that the back lamp is unlit, disconnect the camera from the computer.  
Windows 2000  
Click card services in the task tray on your computer screen, and disable the  
drive number assigned to the camera. Next, after making sure that the back lamp  
is unlit, press the camera’s [ON/OFF] (Power) button to turn off the camera and  
disconnect the camera from your computer.  
. To view images you copied to your computer  
1. Double-click the copied “DCIM” folder to open it.  
2. Double-click the folder that contains the images you want to view.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
89  
3. Double-click the image file you want to view.  
• For information about file names, see “Memory Folder Structure” on page 103.  
• An image that was rotated on the camera will be displayed on your computer  
screen in its original (unrotated) orientation.  
Never use your computer to modify, delete, move, or rename any image files  
that are in the camera’s built-in memory or on its memory card.  
Doing so can cause problems with the camera’s image management data, which  
will make it impossible to play back images on the camera and can drastically alter  
remaining memory capacity. Whenever you want to modify, delete, move, or  
rename an image, do so only on images that are stored on your computer.  
IMPORTANT!  
• Never unplug the USB cable, or operate the camera while viewing or storing  
images. Doing so can cause data to become corrupted.  
Playing Movies  
Windows Media Player, which is already installed on most computers, can be used  
for movie playback. To play back a movie, first copy the movie to your computer and  
then double-click the movie file.  
. Minimum Computer System Requirements for Movie Playback  
The minimum system requirements described below are necessary to play back  
movies recorded with this camera on a computer.  
Operating System : Windows 7 / Windows Vista / Windows XP / Windows 2000  
CPU  
: Image Quality “WIDE”:  
Pentium 4 3.2 GHz or higher  
Image Quality “STD” or “LP”:  
Pentium M 1.0 GHz or higher  
Pentium 4 2.0 GHz or higher  
Required Software: Windows Media Player, DirectX 9.0c or higher  
• The above are recommended system environments. Configuring one of these  
environments does not guarantee proper operation.  
• Certain settings and other installed software may interfere with proper playback of  
movies.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
90  
   
. Movie Playback Precautions  
• Be sure to move the movie data to the hard disk of your computer before trying to  
play it. Proper movie playback may not be possible for data accessed over a  
network, from a memory card, etc.  
• Proper movie playback may not be possible on some computers. If you experience  
problems, try the following.  
– Try recording movies with a quality setting of “LP”.  
– Try upgrading Windows Media Player to the latest version.  
– Quit any other applications you have running, and stop resident applications.  
Even if proper playback is not possible on the computer, you can use an optionally  
available AV cable (EMC-4A) to connect to the video input terminal of a TV or  
computer and play back movies that way.  
Uploading Movie Files to YouTube  
Installing YouTube Uploader for CASIO from the CD-ROM that comes with your  
camera simplifies uploading of movie files you recorded with the “For YouTube”  
BEST SHOT scene to YouTube.  
. What is YouTube?  
YouTube is a movie sharing site managed by YouTube, LLC where you can upload  
movies and view movies uploaded by others.  
. To install YouTube Uploader for CASIO  
1. On the CD-ROM menu screen, select “YouTube Uploader for CASIO”.  
2. After reading the information about installation conditions and system  
requirements for installation in the “Read me” file, install YouTube  
Uploader for CASIO.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
91  
 
. To upload a movie file to YouTube  
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube  
website (http://www.youtube.com/) and register as a user there.  
• Do not upload any video that is copyrighted (including neighboring copyrights)  
unless you yourself own the copyright or you have obtained the permission of the  
applicable copyright holder(s).  
• The maximum file size for each upload is 1024MB.  
1. Record the movie you want to upload using the “For YouTube” BEST  
SHOT movie scene.  
2. If it isn’t already, connect your computer to the Internet.  
3. Connect the camera to your computer (page 87).  
4. Turn on the camera.  
YouTube Uploader for CASIO will start up automatically.  
• If this is the first time you are using the application, configure the YouTube user  
ID and network environment settings, and then click the [OK] button.  
5. The left side of the display will have an area for inputting a title,  
category, and other information required for uploading to YouTube.  
Enter the required information.  
6. The right side of the display shows a list of movie files in camera  
memory. Select the check box next to the movie file you want to  
upload.  
7. When everything is ready, click the [Upload] button.  
This will upload the movie file(s) to YouTube.  
• After uploading is complete, click the [Exit] button to exit the application.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
92  
Transferring Images from Your Computer to Camera Memory  
If you want to transfer images from your computer to the camera, install Photo  
Transport on your computer from the CD-ROM that comes with the camera.  
. To install Photo Transport  
1. On the CD-ROM menu screen, select “Photo Transport”.  
2. After reading the information about installation conditions and system  
requirements for installation in the “Read me” file, install Photo  
Transport.  
. To transfer images to the camera  
1. Connect the camera to your computer (page 87).  
2. On your computer, click the following: Start * All Programs *  
CASIO * Photo Transport.  
This starts up Photo Transport.  
3. Drag the file(s) you want to transfer to the [Transfer] button.  
4. Follow the instructions that appear on the display to complete the  
transfer.  
• The details of the instructions that appear on the display and the transferred  
images will depend on your Photo Transport setup. For details, click the  
[Settings] button or [Help] button and check the setup.  
Transfer Data  
• Only image files with the following extensions can be transferred to the camera.  
jpg, jpeg, jpe, bmp (bmp images are converted to jpeg images automatically when  
transferred.)  
• Certain types of images may not be able to be transferred.  
• You cannot transfer movies to the camera.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
93  
     
. To transfer computer screen captures to the camera  
1. Connect the camera to your computer (page 87).  
2. On your computer, click the following: Start * All Programs *  
CASIO * Photo Transport.  
This starts up Photo Transport.  
3. Display the screen whose screen capture you want to transfer.  
4. Click the [Capture] button.  
5. Draw a boundary around the area you want to capture.  
Move your mouse pointer to the upper left corner of the area you want to capture  
and then hold down the mouse button. Keeping the mouse button depressed,  
drag the pointer down to the lower right corner of the area and then release the  
mouse button.  
6. Follow the instructions that appear on the display.  
This will send an image of the area you selected to the camera.  
• The transfer operation converts screen captures to JPEG format.  
• The instructions that appear on the display and details about the transferred  
images will depend on your Photo Transport setup. For details, click the  
[Settings] button or [Help] button and check the setup.  
. About settings and help  
Click the [Settings] button when you want to change the Photo Transport setup. For  
help about operation procedures and troubleshooting, click the Photo Transport  
[Help] button.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
94  
Viewing User Documentation (PDF Files)  
1. Start up your computer, and place the bundled CD-ROM into its CD-  
ROM drive.  
Normally, this should cause the menu screen to appear automatically. If your  
computer does not display the menu screen automatically, navigate to the CD-  
ROM on your computer and then double-click the “AutoMenu.exe” file.  
2. On the menu screen, click the “Language” down arrow button and then  
select the language you want.  
3. Click “Manual” to select it and then click “Digital Camera”.  
IMPORTANT!  
• You must have Adobe Reader or Adobe Acrobat Reader installed on your  
computer in order to view the contents of a PDF file. If you do not already have  
Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the  
bundled CD-ROM.  
User Registration  
You can perform user registration over the Internet. To do so, of course, you need to  
be able to connect to the Internet with your computer.  
1. On the CD-ROM menu screen, click the “Register” button.  
• This starts up your Web browser and accesses the user registration website.  
Follow the instructions that appear on your computer screen to register.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
95  
   
Using the Camera with a Macintosh  
Install the required software in accordance with what version of the Macintosh OS  
you are running and what you want to do.  
Operating  
System  
Version  
When you want to do  
this:  
See  
page:  
Install this software:  
Save images to your  
Macintosh and view  
them there manually  
OS 9  
OS X  
Installation not required.  
Use commercially available  
software.  
OS 9  
OS X  
Save images to your  
Macintosh automatically/  
Manage images  
Use iPhoto, which comes bundled  
with some Macintosh products.  
You can playback with QuickTime,  
OS 9 / OS X which comes bundled with your  
operating system.  
Play movies  
Connecting the Camera to Your Computer and Saving Files  
IMPORTANT!  
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X  
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5, 10.6)  
only. Use the standard USB driver that comes with your supported operating  
system.  
. To connect the camera to your computer and save files  
1. Turn on the camera and press [MENU].  
2. On the “Set Up” tab, select “USB” and then press [6].  
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
96  
     
4. Turn off the camera and  
then use the USB cable  
that comes with the  
USB port  
USB cable  
camera to connect it to  
your Macintosh.  
Large connector  
• The camera does not  
draw power over the USB  
cable. Make sure the  
camera’s battery is  
sufficiently charged  
before connecting.  
USB/AV port  
• Make sure that you insert  
the cable connector into  
the USB/AV port until you  
feel it click securely into  
place. Failure to insert  
the connector fully can  
result in poor  
Small connector  
Making sure that the mark on the USB cable  
connector is towards the lens side, connect the  
cable to the camera.  
communication or  
malfunction.  
• Note that even while the  
connector is fully inserted, you still will be able to see the metal  
part of the connector as shown in the illustration.  
• When connecting the USB cable to a USB port, make sure you  
align the connector correctly with the port.  
• Your computer may not be able to recognize the camera if you  
connect via a USB hub. Always connect directly to the  
computer’s USB port.  
5. Turn on the camera.  
The camera’s back lamp will light green at this time. In this mode, your Macintosh  
recognizes the memory card loaded in the camera (or the camera’s built-in  
memory if it does not have a memory card loaded) as a drive. The appearance of  
the drive icon depends on the Mac OS version you are using.  
6. Double-click the camera’s drive icon.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
97  
 
7. Drag the “DCIM” folder to the folder to which you want to copy it.  
8. After the copy operation is complete, drag the drive icon to Trash.  
9. On the camera, press [ON/OFF] (Power) to turn off the camera. After  
making sure that the green back lamp is unlit, disconnect the camera  
from the computer.  
. To view copied images  
1. Double-click the camera’s drive icon.  
2. Double-click the “DCIM” folder to open it.  
3. Double-click the folder that contains the images you want to view.  
4. Double-click the image file you want to view.  
• For information about file names, see “Memory Folder Structure” on page 103.  
• An image that was rotated on the camera will be displayed on your Macintosh  
screen in its original (unrotated) orientation.  
Never use your computer to modify, delete, move, or rename any image files  
that are in the camera’s built-in memory or on its memory card.  
Doing so can cause problems with the camera’s image management data, which  
will make it impossible to play back images on the camera and can drastically alter  
remaining memory capacity. Whenever you want to modify, delete, move, or  
rename an image, do so only on images that are stored on your computer.  
IMPORTANT!  
• Never unplug the USB cable, or operate the camera while viewing or storing  
images. Doing so can cause data to become corrupted.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
98  
Transferring Images Automatically and Managing Them on  
Your Macintosh  
If you are running Mac OS X, you can manage snapshots using iPhoto, which comes  
bundled with some Macintosh products. If you are running Mac OS 9, you will need to  
use commercially available software.  
Playing a Movie  
You can use QuickTime, which comes bundled with your operating system, to play  
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh  
and then double-click the movie file.  
. Minimum Computer System Requirements for Movie Playback  
The minimum system requirements described below are necessary to play back  
movies recorded with this camera on a computer.  
Operating System : Mac OS X 10.3.9 or higher  
Required Software: QuickTime 7 or higher  
• The above are recommended system environments. Configuring one of these  
environments does not guarantee proper operation.  
• Certain settings and other installed software may interfere with proper playback of  
movies.  
. Movie Playback Precautions  
Proper movie playback may not be possible on some Macintosh models. If you  
experience problems, try the following.  
– Change the movie image quality setting to “LP”.  
– Upgrade to the latest version of QuickTime.  
– Shut down other applications that are running.  
Even if proper playback is not possible on your Macintosh, you can use an optionally  
available AV cable (EMC-4A) to connect to the video input terminal of a TV or  
Macintosh and play back movies that way.  
IMPORTANT!  
• Be sure to move the movie data to the hard disk of your Macintosh before trying to  
play it. Proper movie playback may not be possible for data accessed over a  
network, from a memory card, etc.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
99  
     
Viewing User Documentation (PDF Files)  
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer  
in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems  
Incorporated website and install Acrobat Reader.  
1. On the CD-ROM, open the “Manual” folder.  
2. Open the “Digital Camera” folder and then open the folder for the  
language whose user’s guide you want to view.  
3. Open the file named “camera_xx.pdf”.  
• “xx” is the language code (Example: camera_e.pdf is for English.).  
User Registration  
Internet registration only is supported. Visit the following CASIO website to register:  
http://world.casio.com/qv/register/  
Using an Eye-Fi Wireless SD Memory Card to Transfer Images  
(Eye-Fi)  
Shooting with an Eye-Fi wireless SD memory card loaded in the camera makes it  
possible to transfer image data automatically to a computer via wireless LAN.  
1. Configure LAN access point, transfer destination and other settings for  
the Eye-Fi card in accordance with the instructions that come with the  
Eye-Fi card.  
2. After configuring settings, load the Eye-Fi card into the camera and  
record.  
Images you record are sent by wireless LAN to your computer, etc.  
• For full details, see the user documentation that comes with the Eye-Fi card.  
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi  
Manager install files to your computer. Do this before formatting the card.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
100  
       
IMPORTANT!  
• Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or  
turn off Eye-Fi card communication (page 105) when on an aircraft or in any other  
location where use of wireless communication is limited or prohibited.  
• Loading an Eye-Fi card will cause the Eye-Fi indicator  
to  
appear on the monitor screen. Its transparent or not transparent  
appearance indicates the communication status as shown below.  
Access point cannot be found or no transferable  
image data exists.  
Transparent  
Not transparent Image transfer in progress  
• A communication icon  
will appear on the monitor screen while image data  
transfer is in progress.  
• The camera’s Auto Power Off (page 111) function is disabled while image data  
transfer is in progress.  
• A confirmation message will appear on the monitor screen if you try to turn off the  
camera while image data transfer is in progress. Follow the instructions in the  
messages (page 135).  
• Transfer of a large number of images can take some time to complete.  
• The original images remain on the Eye-Fi card after the image data transfer.  
• Recording a movie to an Eye-Fi card may result in movie frames being dropped.  
• Proper Eye-Fi card data communication may not be possible due to camera  
settings, battery level, or operating conditions.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
101  
Files and Folders  
The camera creates a file and saves it each time you shoot a snapshot, record a  
movie, or perform any other operation that stores data. Files are grouped by storing  
them in folders. Each file and folder has its own unique name.  
• For details about how folders are organized in memory, see “Memory Folder  
Name and Maximum Number Allowed  
Example  
File  
Each folder can contain up to 9999 files named 26th file name:  
CIMG0001 through CIMG9999. The extension  
CIMG0026.JPG  
on the file name depends on the file type.  
Extension  
Serial number (4 digits)  
Folders  
Folders are named from 100CASIO to  
100th folder name:  
100CASIO  
999CASIO.  
There can be up to 900 folders in memory.  
• The BEST SHOT (page 49) includes a  
sample scene that optimizes settings for  
auction site images. Depending on your  
camera model, the sample scene is named  
either “For eBay” or “Auction”.  
Serial number (3 digits)  
– Images recorded with the eBay scene are  
stored in a folder named “100_EBAY”.  
– Images recorded with the Auction scene  
are stored in a folder named “100_AUCT”.  
• BEST SHOT also has a scene named “For  
YouTube” that optimizes movie settings for  
recording movies for upload to YouTube.  
Images recorded with the YouTube scene  
are stored in a folder named “100YOUTB”.  
• You can view folder and file names on your computer. For details about how file  
names are displayed on the camera’s monitor screen, see page 12.  
• The total number of folders and files allowed depends on the image size and  
quality, and capacity of the memory card being used for storage.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
102  
   
Memory Card Data  
The camera stores images you shoot in accordance with the Design Rule for Camera  
File System (DCF).  
. About DCF  
DCF is a standard that makes it possible to view and print images recorded on one  
manufacturer’s camera on DCF-compliant devices produced by other manufacturers.  
You can transfer DCF-compliant images recorded with another camera to this  
camera and view them on this camera’s monitor screen.  
. Memory Folder Structure  
DCIM Folder  
DCIM  
*
Recording Folder  
Image File  
Movie File  
Audio File  
Audio Snapshot Image File  
Audio Snapshot Audio File  
100CASIO  
CIMG0001.JPG  
CIMG0002.AVI  
CIMG0003.WAV  
CIMG0004.JPG  
CIMG0004.WAV  
Recording Folder  
Recording Folder  
*
101CASIO  
102CASIO  
*
DPOF File Folder  
DPOF File  
MISC  
AUTPRINT.MRK  
* Other folders are created when the following BEST SHOT scenes are used for  
recording: “For eBay” or “Auction” (scene name depends on camera model), or “For  
YouTube”. The following shows the name of the folder created for each scene.  
eBay scene: 100_EBAY  
Auction scene: 100_AUCT  
YouTube scene: 100YOUTB  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
103  
     
. Supported Image Files  
• Image files shot with this camera  
• DCF-compliant image files  
This camera may not be able to display an image, even if it is DCF-compliant. When  
displaying an image recorded on another camera, it may take a long time for the  
image to appear on this camera’s monitor screen.  
. Built-in Memory and Memory Card Data Handling Precautions  
• Whenever copying memory contents to your computer, you should copy the DCIM  
folder and all of its contents. A good way to keep track of multiple DCIM copies of  
the DCIM folders it to change its name to a date or something similar after you copy  
it to your computer. If you later decided to return the folder to the camera, however,  
be sure to change its name back to DCIM. The camera is designed to recognize  
only a root file with the name DCIM. Note the camera also will not be able to  
recognize the folders inside the DCIM folder unless they have the names they  
originally had when you copied them from the camera to your computer.  
• Folders and files must be stored in accordance with the “Memory Folder Structure”  
shown on page 103 in order for the camera to be able to recognize them correctly.  
• You also can use a PC card adapter or a memory card reader/writer to access  
camera files directly from the camera’s memory card.  
Using the Camera with a Computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
104  
Other Settings (Set Up)  
This section explains menu items that you can use to configure settings and perform  
other operations in both the REC mode and PLAY mode.  
For information about menu operations, see page 52.  
Selecting a REC Mode Screen Layout (R Panel)  
Procedure  
[MENU] * Set Up Tab * R Panel  
The REC mode screen layout settings let you select the layout of icons.  
Turns off Control Panel display. This setting helps to  
view more of the image when the 16:9 aspect ratio  
is selected. Certain camera settings are indicated by  
icons on the image.  
• Pressing [SET] while in the REC mode will cause  
Off  
the Control Panel to appear along the right side of  
the monitor screen. The Control Panel will  
disappear after you select an item and press [SET].  
Displays the Control Panel. All camera setting icons  
are cleared from the displayed image while the  
Control Panel is displayed.  
On  
• All screen shots in this manual show what appears when the Control Panel is  
turned off.  
Turning off Eye-Fi Card Communication (Eye-Fi)  
Procedure  
[MENU] * Set Up Tab * Eye-Fi  
Select “Off” to disable Eye-Fi card communication (page 100).  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
105  
       
Configuring Camera Sound Settings (Sounds)  
Procedure  
[MENU] * Set Up Tab * Sounds  
Startup  
Specifies the startup sound.  
Sound 1 - 5: Built-in sounds (1 through 5)  
Off: Sound off  
Half Shutter  
Shutter  
Operation  
Specifies the sound volume. This setting is also used as the  
audio level during video output (page 70).  
= Operation  
= Play  
Specifies the volume of movie and Audio Snapshot audio  
output. This volume setting is not used during video output  
(from the USB/AV port).  
• Setting a volume level of 0 mutes output.  
Configuring a Startup Image (Startup)  
Procedure  
[MENU] * Set Up Tab * Startup  
Display the image you want to use as your startup image and then select “On”.  
• The startup image does not appear when you turn on the camera by pressing [p]  
(PLAY).  
• You can specify a snapshot you recorded as the startup image, or you can use the  
special startup image provided in the camera’s built-in memory.  
• If you select an audio snapshot as the startup image, the audio will not play at  
startup.  
• Formatting built-in memory (page 113) will delete the current startup image setting.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
106  
   
Specifying the File Name Serial Number Generation Rule  
(File No.)  
Procedure  
[MENU] * Set Up Tab * File No.  
Use the following procedure to specify the rule that governs generation of the serial  
number used in file names (page 102).  
Tells the camera to remember the last used file number. A new file will  
be named using the next sequential number, even if files are deleted or  
if a blank memory card is loaded. If a memory card is loaded and that  
Continue card already has files stored on it and the largest sequential number in  
the existing file names is greater than the largest sequential number  
remembered by the camera, numbering of new files will start from the  
largest sequential number in the existing file names plus 1.  
Restarts the serial number from 0001 whenever all files are deleted or  
when the memory card is replaced with a blank one. If a memory card  
Reset  
is loaded and that card already has files stored on it, numbering of new  
files will start from the largest sequential number in the existing file  
names number plus 1.  
Configuring World Time Settings (World Time)  
Procedure  
[MENU] * Set Up Tab * World Time  
You can use the World Time screen to view the current time in a zone that is different  
from your Home City when you go on a trip, etc. World Time displays the current time  
in 162 cities in 32 time zones around the globe.  
1. Use [8] and [2] to select “World” and then press [6].  
• To change the geographic area and city for the time where you normally use  
the camera, select “Home”.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
107  
   
2. Use [8] and [2] to select “City” and then press [6].  
• To change the “World” setting to summer time, use [8] and [2] to select  
“DST” and then select “On”. Summer time is used in some geographical areas  
to advance the current time setting by one hour during the summer months.  
3. Use [8], [2], [4], and [6] to select the geographic area you want and  
then press [SET].  
4. Use [8] and [2] to select the city you want and then press [SET].  
5. Press [SET].  
IMPORTANT!  
• Before configuring World Time settings, make sure that the Home City setting is  
the place where you live or normally use the camera. If it isn’t, select “Home” on the  
screen in step 1 and configure the Home City, date, and time settings as required  
Time Stamping Snapshots (Timestamp)  
Procedure  
[MENU] * Set Up Tab * Timestamp  
You can configure the camera to stamp the recording date only, or date and time in  
the lower right corner of each snapshot.  
• Once date and time information is stamped into a snapshot, it cannot be edited or  
deleted.  
Example: July, 10, 2012, 1:25 p.m.  
Date  
2012/7/10  
Date&Time  
Off  
2012/7/10 1:25pm  
No stamping of date and/or time  
• Even if you do not stamp the date and/or time with Timestamp, you can do so later  
using the DPOF function or some printing application (page 84).  
• Digital zoom is disabled while date stamping is turned on.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
108  
   
Setting the Camera’s Clock (Adjust)  
Procedure  
[MENU] * Set Up Tab * Adjust  
[8] [2] Change the setting at the cursor location  
[4] [6]  
Move the cursor between settings  
[BS]  
Toggles between 12-hour and 24-hour format  
When the date and time settings are what you want, press [SET] to apply them.  
• You can specify a date from 2001 to 2049.  
• Be sure to select your Home City (page 107) before setting the time and date. If  
you set the time and date while the wrong city is selected for your Home City, the  
times and dates of all of the World Time cities (page 107) will be wrong.  
Specifying the Date Style (Date Style)  
Procedure  
[MENU] * Set Up Tab * Date Style  
You can select from among three different styles for the date.  
Example: July, 10, 2012  
YY/MM/DD  
DD/MM/YY  
MM/DD/YY  
12/7/10  
10/7/12  
7/10/12  
• This setting also affects the Control Panel date format as shown below (page 29).  
YY/MM/DD or MM/DD/YY: MM/DD  
DD/MM/YY: DD/MM  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
109  
       
Specifying the Display Language (Language)  
Procedure  
[MENU] * Set Up Tab * Language  
. Specify the display language you want.  
Select the tab on the right.  
Select “Language”.  
Select the language you want.  
• Camera models sold in certain geographic areas  
may not support display language selection.  
1
1
2
3
23  
Configuring Sleep State Settings (Sleep)  
Procedure  
[MENU] * Set Up Tab * Sleep  
This feature turns off the monitor screen whenever no camera operation is performed  
for a preset amount of time. Press any button to turn the monitor screen back on.  
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is  
selected.)  
• Sleep is disabled under any of the following conditions.  
– In the PLAY mode  
– While the camera is connected to a computer or other device  
– During a slideshow  
– During O Tracking”  
– During Voice Recording playback or recording  
– During movie recording and playback  
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
110  
       
Configuring Auto Power Settings (Auto Power Off)  
Procedure  
[MENU] * Set Up Tab * Auto Power Off  
Auto Power Off turns off the camera whenever no camera operation is performed for  
a preset amount of time.  
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the  
PLAY mode.)  
• Auto Power Off is disabled under any of the following conditions.  
– While the camera is connected to a computer or other device  
– During a slideshow  
– During O Tracking”  
– During Voice Recording playback or recording  
– During movie recording and playback  
Configuring [r] and [p] Settings (REC/PLAY)  
Procedure  
[MENU] * Set Up Tab * REC/PLAY  
Camera turns on whenever [r] (REC) or [p] (PLAY) is  
pressed.  
Power On  
Camera turns on or off whenever [r] (REC) or [p] (PLAY) is  
pressed.  
Power On/Off  
Camera does not turn on or off whenever [r] (REC) or [p]  
(PLAY) is pressed.  
Disable  
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC  
mode or [p] (PLAY) in the PLAY mode.  
• Change this setting to anything besides “Disable” before connecting to a TV for  
image viewing.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
111  
       
Configuring USB Protocol Settings (USB)  
Procedure  
[MENU] * Set Up Tab * USB  
You can use the procedure below to select the USB communication protocol, which is  
used when exchanging data with a computer, printer, or other external device.  
Select this setting when connecting to a computer (pages 87, 96).  
Mass  
Storage  
With this setting, the computer sees the camera as an external  
storage device. Use this setting for normal transfer of images from  
the camera to a computer.  
Select this setting when connecting to a printer that supports  
PictBridge (page 80). This setting simplifies the transfer of image  
data to the connected device.  
PTP  
(PictBridge)  
Selecting the Screen Aspect Ratio and Video Output System  
(Video Out)  
Procedure  
[MENU] * Set Up Tab * Video Out  
You can use the procedure in this section to select either NTSC or PAL as the video  
output system. You can also specify an aspect ratio of 4:3 or 16:9.  
NTSC  
PAL  
Video system used in Japan, the U.S., and other countries  
Video system used in Europe and other areas  
4:3  
Normal TV screen aspect ratio  
Wide screen aspect ratio  
16:9  
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.  
Images will not display correctly if you select the wrong aspect ratio.  
• Images will not display correctly unless the camera’s video signal output setting  
matches the video signal system of the TV or other video equipment.  
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC  
or PAL.  
• An optionally available AV cable (EMC-4A) is required for video output.  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
112  
   
Formatting Built-in Memory or a Memory Card (Format)  
Procedure  
[MENU] * Set Up Tab * Format  
If a memory card is loaded in the camera, this operation will format the memory card.  
It will format built-in memory if no memory card is loaded.  
• The format operation will delete all contents on the memory card or in built-in  
memory. It cannot be undone. Make sure you do not need any data currently on  
the card or in built-in memory before you format it.  
• Formatting built-in memory will delete the following data.  
– Protected images  
• Formatting a memory card will delete the following data.  
– Protected images  
• Make sure the camera’s battery is sufficiently charged before starting a formatting  
operation. Formatting may not be performed correctly and the camera may stop  
operating normally if the camera powers down while formatting is in progress.  
• Never open the battery cover while formatting is in progress. Doing so can cause  
the camera to stop operating normally.  
Resetting the Camera to Factory Defaults (Reset)  
Procedure  
[MENU] * Set Up Tab * Reset  
See page 128 for details about the camera’s factory default settings.  
The settings below are not reset.  
World Time settings, clock settings, date style, screen language, video output  
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)  
113  
       
Configuring Monitor Screen Settings  
You can turn display information on and off by pressing [8] (DISP). You can  
configure separate settings for the REC mode and PLAY mode.  
Information display on  
Displays information about image settings, etc.  
Turns on display of camera setting  
and other indicators, along with a  
histogram (page 115).  
Information display  
+ Histogram on  
Histogram  
Information display off  
No information displayed  
Using the On-screen Histogram to Check Exposure  
(Histogram)  
Displays a histogram on the monitor screen which you can use to  
check the exposure of an image before you shoot it. You also can  
display the histogram in the PLAY mode for information about the  
exposure levels of images.  
• You can use key customization (page 61) to configure the [4]  
and [6] buttons so they control the EV shift setting (page 39),  
and perform EV shift while viewing the results on the on-screen  
histogram.  
Histogram  
Configuring Monitor Screen Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
114  
       
How to Use the Histogram  
A histogram is a graph that represents the lightness of an image in terms of the  
number of pixels. The vertical axis indicates the number of pixels, while the horizontal  
axis indicates lightness. If the histogram appears too lopsided for some reason, you  
can use EV shift to move it left or right in order to achieve better balance. Optimum  
exposure can be achieved by EV shifting so the graph is as close to the center as  
possible. For snapshots, you can even display individual histograms for R (red), G  
(green), and B (blue).  
Example Histograms  
A histogram towards the left side results when the  
overall image is dark. A histogram that is too far to  
the left may result in “black out” of the dark areas  
of an image.  
A histogram towards the right side results when  
the overall image is light. A histogram that is too  
far to the right may result in “white out” of the light  
areas of an image.  
An overall well-balanced histogram results when  
the overall image is at optimal lightness.  
NOTE  
• A centered histogram does not necessarily guarantee optimum exposure. The  
recorded image may be over-exposed or under-exposed, even though its  
histogram is centered.  
• Due to the limitations of exposure compensation, you may not be able to achieve  
an optimum histogram configuration.  
• Use of the flash and certain shooting conditions can cause the histogram to  
indicate exposure that is different from the actual exposure of the image when it is  
shot.  
Configuring Monitor Screen Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
115  
 
Appendix  
Precautions during Use  
. Avoid Use While In Motion  
• Never use the camera to record or play back images while operating an automobile  
or other vehicle, or while walking. Looking at the monitor while in motion creates  
the risk of serious accident.  
. Directly Viewing the Sun or Bright Light  
• Never look at the sun or any other bright light through the cameras viewfinder.  
Doing so can damage your eyesight.  
. Flash  
• Never use the flash unit in areas where flammable or explosive gas may be  
present. Such conditions create the risk of fire and explosion.  
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so  
can interfere with the driver’s vision and creates the risk of accident.  
• Never fire the flash too close to the eyes of the subject. Doing so creates the risk of  
loss of eyesight.  
. Monitor Screen  
• Do not apply strong pressure to the monitor screen surface or subject it to strong  
impact. Doing so can cause the monitor screen glass to crack.  
• Should the monitor screen ever become cracked, never touch any of the liquid  
inside the monitor screen. Doing so creates the risk of skin inflammation.  
• Should monitor screen liquid ever get into your mouth, immediately rinse your  
mouth out and contact your physician.  
• Should monitor screen liquid ever get into your eyes or onto your skin, immediately  
rinse with clean water for at least 15 minutes and contact your physician.  
. Connections  
• Never plug any devices that are not specified for use with this camera into  
connectors. Connecting a non-specified device creates the risk of fire and electric  
shock.  
. Transport  
• Never operate the camera inside of an aircraft or anywhere else where operation of  
such devices is restricted. Improper use creates the risk of serious accident.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
116  
   
. Smoke, abnormal odor, overheating, and other abnormalities  
• Continued use of the camera while it is emitting smoke or strange odor, or while it  
is overheating creates the risk of fire and electric shock. Immediately perform the  
following steps whenever any of the above symptoms are present.  
1. Turn off the camera.  
2. Remove the battery from the camera, taking care to protect yourself against burn  
injury.  
3. Contact your dealer or nearest CASIO authorized service center.  
. Water and Foreign Matter  
• Water, other liquids, or foreign matter (especially metal) getting inside the camera  
creates the risk of fire and electric shock. Immediately perform the following steps  
whenever any of the above symptoms are present. Particular care is required when  
using the camera where it is raining or snowing, near the ocean or other body of  
water, or in a bathroom.  
1. Turn off the camera.  
2. Remove the battery from the camera.  
3. Contact your dealer or nearest CASIO authorized service center.  
. Dropping and Rough Treatment  
• Continued use of the camera after it is damaged by dropping or other rough  
treatment creates the risk of fire and electric shock. Immediately perform the  
following steps whenever any of the above symptoms are present.  
1. Turn off the camera.  
2. Remove the battery from the camera.  
3. Contact your dealer or nearest CASIO authorized service center.  
. Keep Away From Fire  
• Never expose the camera to fire, which can cause it to explode and creates the risk  
of fire and electric shock.  
. Disassembly and Modification  
• Never try to take the camera apart or modify it in any way. Doing so creates the risk  
of electric shock, burn injury, and other personal injury. Be sure to leave all internal  
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized  
service center.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
117  
. Locations To Be Avoided  
• Never leave the camera in any of the following types of locations. Doing so creates  
the risk of fire and electric shock.  
– Areas subject to large amounts of humidity or dust  
– Food preparation areas or other locations where oil smoke is present  
– Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed  
vehicle parked in the sun, or other areas subject to very high temperatures  
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can  
cause the camera to fall, creating the risk of personal injury.  
. Backing Up Important Data  
• Always keep backup copies of important data in camera memory by transferring it  
to a computer or other storage device. Note that data can be deleted in the case of  
camera malfunction, repair, etc.  
. Memory Protection  
• Whenever replacing the battery, be sure to follow the correct procedure as  
described in the documentation that comes with the camera. Incorrectly replacing  
the battery can result in corruption or loss of data in camera memory.  
. Rechargeable Battery  
• Use only the specified charger unit or the specified device to charge the battery.  
Attempting to charge the battery by an unauthorized means creates the risk of  
battery overheating, fire, and explosion.  
• Do not expose or immerse the battery in fresh water or salt water. Doing so can  
damage the battery, and cause deterioration of its performance and loss of service  
life.  
• The battery is intended for use with a CASIO Digital Camera only. Use with any  
other device creates the risk of the battery damage, or deterioration of battery  
performance and service life.  
• Failure to observe any of the following precautions creates the risk of battery  
overheating, fire, and explosion.  
– Never use or leave the battery near open flame.  
– Do not expose the battery to heat or fire.  
– Make sure the battery is oriented correctly when it is connected to the charger  
unit.  
– Never carry or store the battery together with items that can conduct electricity  
(necklaces, pencil lead, etc.).  
– Never disassemble the battery, pierce it with a needle, or expose it to strong  
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never  
place the battery into a microwave oven, heater, high-pressure generating  
device, etc.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
118  
• Should you ever notice leakage, strange odor, heat generation, discoloration,  
deformation, or any other abnormal condition while using, charging, or storing a  
battery, immediately remove it from the camera or charger unit and keep it away  
from open flame.  
• Do not use or leave the battery under direct sunlight, in an automobile parked in the  
sun, or in any other area subject to high temperatures. Doing so can damage the  
battery, and cause deterioration of its performance and loss of service life.  
• If battery charging does not end normally within the specified charging time, stop  
charging anyway and contact your local CASIO authorized service center.  
Continued charging creates the risk of battery overheating, fire, and explosion.  
• Battery fluid can damage your eyes. Should battery fluid get into your eyes  
accidentally, immediately rinse them with clean tap water and then consult a  
physician.  
• Be sure to read the user documentation that comes with the camera and special  
charger unit before using or charging the battery.  
• If a battery is to be used by young children, make sure that a responsible adult  
makes them aware of the precautions and proper handling instructions, and make  
sure that they handle the battery correctly.  
• Should fluid from a battery accidentally get onto clothing or your skin, immediately  
rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin  
irritation.  
. Battery Life  
• Battery continuous operation times provided in this manual represent the  
approximate amount of time before the camera turns off due to low battery power  
when being powered by the special battery under normal temperature (23°C  
(73°F)). They do not guarantee that you will be able to achieve the indicated level  
of operation. Actual battery life is greatly affected by ambient temperature, battery  
storage conditions, the amount of time spent in storage, etc.  
• Leaving the camera on can run down the battery and cause the low battery  
warning to appear. Turn off the camera whenever you are not using it.  
• The low battery warning indicates that the camera is about to turn off due to low  
battery power. Charge the battery as soon as possible. Leaving a low or dead  
battery in the camera can lead to battery leakage and data corruption.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
119  
. Data Error Precautions  
Your digital camera is manufactured using precision digital components. Any of the  
following creates the risk of corruption of data in camera memory.  
– Removing the battery or memory card while the camera is performing some  
operation  
– Removing the battery or memory card while the back lamp is flashing green after  
turning off the camera  
– Disconnecting the USB cable while communication is in progress  
– Using a battery that is low  
– Other abnormal operations  
Any of the above conditions can cause an error message to appear on the monitor  
screen (page 135). Perform the action indicated by the message that appears.  
. Operating Environment  
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)  
• Operating Humidity: 10 to 85% (non condensation)  
• Do not place the camera in any of the following locations.  
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand  
– Near an air conditioner or in other areas subjected to extreme temperature or  
humidity  
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration  
. Condensation  
Sudden and extreme temperature changes, such as when the camera is moved from  
the outdoors on a cold winter day into a warm room, can cause water droplets called  
“condensation” to form on the interior and the exterior of the camera, which creates  
the risk of malfunction. To prevent condensation from forming seal the camera in a  
plastic bag before changing locations. Then leave the bag sealed to allow the air  
inside to naturally change to the same temperature as the air in the new location.  
After that, remove the camera from the bag and open the battery cover for a few  
hours.  
. Lens  
• Never apply too much force when cleaning the surface of the lens. Doing so can  
scratch the lens surface and cause malfunction.  
• You may sometimes notice some distortion in certain types of images, such as a  
slight bend in lines that should be straight. This is due to the characteristics of  
lenses, and does not indicate malfunction of the camera.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
120  
 
. Caring for your camera  
• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and  
other foreign matter on the lens or flash window can interfere with proper operation  
of the camera. Use a blower or other means to keep the lens and flash window free  
of dirt and dust, and wipe gently with a soft, dry cloth.  
• To clean the camera, wipe it with a soft, dry cloth.  
. Old Rechargeable Battery Handling Precautions  
• Insulate the positive and negative terminals with tape, etc.  
• Do not peel the covering off of the battery.  
• Do not try to take the battery apart.  
. Charger Unit Handling Precautions  
-
0 Never plug the power cord into an outlet whose voltage rating is different from  
that marked on the power cord. Doing so creates the risk of fire, malfunction,  
and electric shock.  
0 Take care to protect the power cord against damage and breaking. Never place  
heavy objects onto the power cord, or expose it to intense heat. Doing so can  
damage the power cord, creating the risk of fire and electric shock.  
0 Never try to modify the power cord, or subject it to severe bending, twisting, or  
pulling. Doing so creates the risk of fire, malfunction, and electric shock.  
0 Never plug in or unplug the power cord while your hands are wet. Doing so  
creates the risk of electric shock.  
0 Do not plug the power cord into an outlet or extension cord that is shared by  
other devices. Doing so creates the risk of fire, malfunction, and electric shock.  
0 Should the power cord ever become damaged (to the point that internal wires  
are exposed or cut), immediately contact your original retailer or a CASIO  
authorized service center to request repair. Continued use of a damaged power  
cord creates the risk of fire, malfunction, and electric shock.  
• The charger unit becomes slightly warm during charging. This is normal and does  
not indicate malfunction.  
• Unplug the power cord from the power outlet when you are not using the charger  
unit.  
• Never use detergent to clean the power cord (especially the plug).  
• Never cover the charger unit with a blanket, etc. Doing so creates the risk of fire.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
121  
. Other Precautions  
The camera becomes slightly warm during use. This is normal and does not indicate  
malfunction.  
. Copyrights  
Except for your own personal enjoyment, unauthorized use of use of snapshots or  
movies of images whose rights belong to others, without the permission of the right  
holder, is forbidden by copyright laws. In some cases, shooting of public  
performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your  
own personal enjoyment. Regardless of whether such files are purchased by you or  
obtained for free, posting them on a website, a file sharing site, or any other Internet  
site, or otherwise distributing them to third parties without the permission of the  
copyright holder is strictly prohibited by copyright laws and international treaties. For  
example, uploading or distributing on the Internet images of TV programs, live  
concerts, music videos, etc. that were photographed or recorded by you may infringe  
upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held  
liable for use of this product in any way that infringes on the copyrights of others or  
that violates copyright laws.  
The following terms, which are used in this manual, are registered trademarks or  
trademarks of their respective owners.  
Note that trademark and registered trademark ® are not use within the text of this  
manual.  
• The SDHC logo is a trademark.  
• Microsoft, Windows, Internet Explorer, Windows Media, Windows Vista,  
Windows 7, and DirectX are registered trademarks or trademarks of Microsoft  
Corporation in the United States and other countries.  
• Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc.  
• Adobe and Reader are trademarks or registered trademarks in the United States  
and other countries of Adobe Systems Incorporated.  
• YouTube, the YouTube logo, and “Broadcast Yourself” are trademarks or  
registered trademarks of YouTube, LLC.  
• EXILIM, Photo Transport, and YouTube Uploader for CASIO are registered  
trademarks or trademarks of CASIO COMPUTER CO., LTD.  
• All other company or product names mentioned herein are registered trademarks  
or trademarks of their respective companies.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
122  
Any and all unauthorized commercial copying, distribution, and copying of the  
bundled software over a network are prohibited.  
This product’s YouTube upload functionality is included under license from YouTube,  
LLC. The presence of YouTube upload functionality in this product is not an  
endorsement or recommendation of the product by YouTube, LLC.  
Power Supply  
Charging  
If the [CHARGE] lamp flashes red...  
• Charging cannot be performed because ambient temperature or the temperature of  
the charger is too hot or too cold. Leave the camera in a location whose  
temperature is within the range where charging can be performed. When the  
camera returns to a temperature where charging can be performed, the [CHARGE]  
lamp will light red.  
• Check if the charger and battery contacts are dirty. If contacts are dirty, wipe them  
clean with a dry cloth.  
If problems continue to occur after you perform the above steps, it could mean that  
the battery is faulty. Contact your nearest CASIO authorized service center.  
To replace the battery  
1. Open the battery cover and  
Stopper  
remove the current battery.  
With the monitor screen side of the  
camera facing upwards, slide the  
stopper in the direction indicated by  
the arrow in the illustration. After the  
battery pops out, pull it the rest of  
the way out of the camera.  
2. Load a new battery.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
123  
         
Battery Precautions  
. Precautions during Use  
• Operation provided by a battery under cold conditions is always less than operation  
under normal temperatures. This is due to the characteristics of the battery, not the  
camera.  
• Charge the battery in an area where the temperature is within the range of 5°C to  
35°C (41°F to 95°F). Outside this temperature range charging can take longer than  
normal or even fail.  
• Do not tear or remove the battery outer label.  
• If a battery provides only very limited operation following a full charge, it probably  
means the battery has reached the end of its service life. Replace the battery with a  
new one.  
• The included NP-82 battery is intended exclusively for use with this EXILIM digital  
camera. Never try to use it to power any other device. When purchasing a  
replacement or spare, be sure to purchase an NP-80 battery.  
. Storage Precautions  
• Storing the battery for a long time while it is charged can cause deterioration of  
battery characteristics. If you do not plan to use a battery for some time, fully use  
up its charge before storing it.  
• Always remove the battery from the camera when you are not using it. A battery left  
in the camera can discharge and go dead, which will require some time to charge  
when you need to use the camera.  
• Store batteries in a cool, dry place (20°C (68°F) or lower).  
• To prevent over discharging of an unused battery, fully charge it, and then load it in  
the camera and fully use up the charge about once every six months.  
Using the Camera in another Country  
. Precautions during Use  
• The bundled charger is designed for operation with any power supply in the range  
of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power cord  
plug depends on each country or geographic area. Before taking the camera and  
charger along on a trip, check with travel agent about the power supply  
requirements in your destination(s).  
• Do not connect the charger to a power supply through a voltage converter or  
similar device. Doing so can lead to malfunction.  
. Extra Batteries  
• Taking along extra fully charged batteries (NP-82 or NP-80) is recommended while  
on a trip in order to avoid not being able to shoot images due to the battery going  
dead.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
124  
   
Using a Memory Card  
See page 19 for information about supported memory cards and how to load a  
memory card.  
To replace the memory card  
Press the memory card and then release it. This will  
cause it to pop out of the memory card slot slightly.  
Pull the card out the rest of the way and then insert  
another one.  
• Never remove a card from the camera while the  
back lamp is flashing green. Doing so can cause  
the image save operation to fail and even  
damage the memory card.  
. Using a Memory Card  
• SD memory cards and SDHC memory cards have a  
write protect switch. Use the switch when you need to  
guard against accidentally deleting data. Note,  
however, if you write protect an SD memory card you  
must then turn write protection off whenever you want  
to record to it, format it, or delete any of its images.  
• If a memory card starts to behave abnormally during  
Write enabled  
Write disabled  
image playback, you can restore normal operation by reformatting it (page 113).  
However, it is recommended that you always take along multiple memory cards  
whenever using the camera far away from the home or office.  
• As you record data to and delete data from a memory card a number of times, it  
loses its ability to retain data. Because of this, periodic re-formatting of a memory  
card is recommended.  
• Electrostatic charge, electrical noise, and other phenomena can cause data to  
become corrupted or even lost. Make sure that you always back up important data  
on other media (CD-R, CD-RW, hard disk, etc.).  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
125  
     
. Memory Card Handling Precautions  
Certain types of cards can slow down processing speeds. In particular, you may  
experience problems saving high-quality (WIDE) movies. Use of certain types of  
memory cards increase the time it takes to record movies, which can cause movie  
»
Y
frames to be lost. This condition is indicated by  
and  
flashing on the monitor  
screen. Use of a memory card with a maximum transfer speed of at least 10MB per  
second is recommended.  
. Discarding or Transferring Ownership of a Memory Card or the  
Camera  
The format and delete functions of this camera just modify file management  
information of memory card and/or camera main memory. They do not actually  
modify the data itself. Note that management of your data is entirely your  
responsibility. To ensure data security, the following actions are recommended  
whenever you discard or transfer ownership of a memory card or the camera.  
• When discarding a memory card and/or the camera, either physically destroy them  
or completely wipe out all of their data using commercially available software, etc.  
• When transferring ownership of a memory card and/or the camera, completely  
wipe out all of their data using commercially available software, etc., and then use  
the camera’s format function to format the memory card and/or camera main  
memory.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
126  
 
Computer System Requirements for Bundled Software  
(Bundled CD-ROM)  
Computer system requirements are different for each of the applications. Be sure to  
check the requirements for the particular application you are trying to use. Note that  
the values provided here are minimum requirements for running each application.  
Actual requirements are greater, depending on the number of images and the sizes of  
the images being handled.  
0Windows  
YouTube Uploader for CASIO  
Operating System: Windows 7 / Windows Vista / Windows XP (SP2/SP3) /  
Windows 2000 (SP4)  
Other  
: Sufficient memory to run the operating system  
Computer configuration that enables playback of movies on the  
YouTube site  
Computer configuration that enables upload of movies to the  
YouTube site  
Photo Transport 1.0  
Operating System  
Memory  
: Windows 7 / Windows Vista / Windows XP / Windows 2000  
: At least 64MB  
Hard Disk Drive Space: At least 2MB  
Adobe Reader 8  
Operating System  
: Windows Vista / Windows XP (SP2/SP3) / Windows 2000  
(SP4)  
CPU  
Memory  
: Pentium III Class  
: At least 128MB  
Hard Disk Drive Space: At least 180MB  
Other  
: Internet Explorer 6.0 or higher installed  
For details about the minimum system requirements for each software application,  
see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes  
bundled with the camera.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
127  
   
Reset Initial Default Settings  
The tables in this section show the initial default settings that are configured for menu  
items (displayed when you press [MENU]) after you reset the camera (page 113).  
Menu items depend on whether the camera is in the REC mode or PLAY mode.  
• A dash (–) indicates an item whose setting is not reset or an item for which there is  
no reset setting.  
. REC Mode  
“REC” Tab  
Q
ß
Off  
Off  
Focus  
(Auto Focus)  
Review  
On  
On  
b
Focus Frame  
CS  
Icon Help  
BEST SHOT:  
Off / Flash: On /  
Self-timer  
Focus: Off / White  
Balance: Off / ISO:  
Off / AF Area: On /  
Metering: Off / CS:  
Off / Self-timer: Off /  
Flash Intensity: Off /  
Digital Zoom: On /  
MF Position: Off /  
Zoom Position: Off  
Face Detection Off  
Anti Shake  
AF Area  
Off  
Memory  
U
Spot  
easy Mode  
L/R Key  
Off  
Off  
Off  
On  
Grid  
Digital Zoom  
“Quality” Tab  
Size  
x
12M (4000 3000)  
B
Off  
0
Metering  
Multi  
t
Quality  
(Snapshots)  
Color Filter  
Sharpness  
Saturation  
Contrast  
Normal  
»
Quality  
0
STD  
0.0  
(Movies)  
0
EV Shift  
Flash Intensity  
0
White Balance Auto  
ISO Auto  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
128  
       
“Set Up” Tab  
R
Panel  
Off  
On  
Adjust  
Eye-Fi  
Date Style  
Language  
Sleep  
Startup: Sound 1 /  
Half Shutter:  
Sound 1 /  
1 min  
Auto Power  
Off  
Shutter: Sound 1 /  
Operation: Sound 1 /  
=Operation:  
2 min  
Sounds  
REC/PLAY  
USB  
Power On  
...////  
/
Mass Storage  
=Play: ...////  
Video Out  
Format  
Reset  
Startup  
Off  
File No.  
Continue  
Home  
Off  
World Time  
Timestamp  
. PLAY Mode  
“PLAY” Tab  
Time: 30 min /  
Interval: 3 sec /  
Effect: On  
Rotation  
Resize  
Slideshow  
Trimming  
Dubbing  
Copy  
Red Eye  
DPOF Printing  
Protect  
“Set Up” Tab  
• The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
129  
 
When things don’t go right...  
Troubleshooting  
Problem  
Possible Cause and Recommended Action  
Power Supply  
Power does not  
turn on.  
1)The battery may not be loaded correctly (page 16).  
2)The battery may be dead. Charge the battery (page 15). If the  
battery goes dead soon after being charged, it means the  
battery has reached the end of its life and needs to be  
replaced. Purchase an optionally available CASIO NP-80  
rechargeable lithium ion battery.  
The camera  
suddenly powers  
down.  
1)Auto Power Off may have activated (page 111). Turn power  
back on.  
2)The battery may be dead. Charge the battery (page 15).  
3)The camera’s protection function may have activated  
because camera temperature is too high. Turn off the camera  
and wait until it cools down before trying to use it again.  
Power will not turn Remove the battery from the camera and then reload it.  
off. Nothing  
happens when a  
button is pressed.  
Image Recording  
r
] (REC) to enter  
Image is not  
1)If the camera is in the PLAY mode, press [  
the REC mode.  
recorded when the  
shutter button is  
pressed.  
2)If the flash is charging, wait until the charge operation  
finishes.  
3)If the message “Memory Full” appears, transfer images to  
your computer, delete images you no longer need, or use a  
different memory card.  
Auto Focus does  
not focus properly  
1)If the lens is dirty, clean it off.  
2)The subject may not be in the center of the focus frame when  
you compose the image.  
3)The subject you are shooting may not be a type that is  
compatible with Auto Focus (page 28). Use manual focus  
(page 54).  
4)You may be moving the camera when shooting. Try shooting  
with Anti Shake (page 36) or use a tripod.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
130  
   
Problem  
Possible Cause and Recommended Action  
The subject is out  
of focus in the  
The image may not be focused properly. When composing the  
image, make sure the subject is located inside the focus frame.  
recorded image.  
?
The flash does not 1)If  
(Flash Off) is selected as the flash mode, change to  
fire.  
another mode (page 33).  
2)If the battery is dead, charge it (page 15).  
?
3)If a BEST SHOT scene that uses  
(Flash Off) is selected,  
change to a different flash mode (page 33) or select a  
different BEST SHOT scene (page 49).  
?
A red  
(Flash  
The flash unit may be malfunctioning. Contact a CASIO  
authorized service center or your original retailer. Note that  
though the flash will not fire, you still can use the camera for  
non-flash shots.  
Off) icon appears  
on the monitor  
screen and the  
flash does not fire.  
Camera powers  
down during Self-  
timer countdown.  
The battery may be dead. Charge the battery (page 15).  
The monitor screen 1)You may be using Manual Focus and have not focused the  
image is out of  
focus.  
image. Focus the image (page 54).  
´
2)You may be using  
(Macro) for scenery or portraits. Use  
Auto Focus for scenery and portrait shots (page 54).  
)
3)You may be trying to use Auto Focus or  
shooting a close-up shot. Use the  
(page 54).  
(Infinity) when  
´
(Macro) for close ups  
There is a vertical  
line in the monitor  
screen image.  
Shooting a very brightly lit subject can cause a vertical band to  
appear in the monitor screen image. This is a CCD  
phenomenon known as “vertical smear”, and does not indicate  
malfunction of the camera. Note that vertical smear is not  
recorded with the image in the case of a snapshot, but it is  
recorded in the case of a movie.  
There is digital  
noise in images.  
1)Sensitivity may have been increased automatically for a dark  
subject, which increases the chance of digital noise. Use a  
light or some other means to illuminate the subject.  
?
2)You may be attempting to shoot in a dark location with  
(Flash Off) selected, which can increase digital noise and  
make images appear coarse. In this case, turn on flash (page  
33) or use lights for illumination.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
131  
Problem  
Possible Cause and Recommended Action  
A recorded image  
was not saved.  
1)Camera power may have been turned off before the save  
operation was complete, which will result in the image not  
being saved. If the battery indicator shows  
battery as soon as possible (page 17).  
, charge the  
2)You may have removed the memory card from the camera  
before the save operation was complete, which will result in  
the image not being saved. Do not remove the memory card  
before the save operation is complete.  
Though available  
lighting is bright,  
Not enough light is reaching the subjects. Change the flash  
<
mode setting to  
(Flash On) for daylight synchro flash (page  
the faces of people 33), or adjust EV shift to the + side (page 39).  
in the image are  
dark.  
Night shots come  
out bad.  
Use the following BEST SHOT scenes (page 49) when shooting  
at night.  
• Night Scene (for shooting night scenery only)  
• Night Scene Portrait (for shooting people against night  
scenery)  
Subjects are too  
Sunlight reflected by water, sand, or snow, can cause  
<
dark when shooting underexposure of images. Change the flash mode setting to  
images in a  
seashore or ski  
area.  
(Flash On) for daylight synchro flash (page 33), or adjust EV  
shift to the + side (page 39).  
Digital zoom  
(including HD  
1)The digital zoom setting may be turned off. Turn on digital  
zoom (page 62).  
zoom) does not  
work. The zoom  
bar indicates zoom  
only up to a zoom  
factor of 3.0.  
2)Date stamping may be turned on, which will cause digital  
zoom to be disabled. Turn off date stamping (page 108).  
The image is out of 1)Focusing may not be possible because the subject is outside  
focus during movie  
recording.  
the focus range. Shoot within the allowable range.  
2)The lens may be dirty. Clean the lens (page 120).  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
132  
Problem  
Playback  
Possible Cause and Recommended Action  
The color of the  
playback image is  
Sunlight or light from another source may be shining directly  
into the lens when you are shooting. Position the camera so  
different from what sunlight does not shine directly into the lens.  
appears on the  
monitor screen  
when shooting.  
Images are not  
displayed.  
This camera cannot display non-DCF images recorded onto a  
memory card using another digital camera.  
Images cannot be  
edited (with  
Note that you cannot edit the following types of snapshots.  
• Movies  
resizing, trimming,  
rotation).  
• Snapshots recorded with another camera  
Other  
The wrong date  
and time are  
The date and time setting is off. Set the correct date and time  
(page 109).  
displayed, or the  
wrong date and  
time are being  
stored along with  
image data.  
The messages on  
the display are in  
the wrong  
The wrong display language is selected. Change the display  
language setting (page 110).  
language.  
Images cannot be  
transferred over a  
USB connection.  
1)The USB cable may not be connected securely. Check all  
connections.  
2)The wrong USB communication protocol is selected. Select  
the correct USB communication protocol in accordance with  
the type of device you are connecting (pages 87, 96).  
3)If the camera is not turned on, turn it on.  
4)Your computer may not be able to recognize the camera if  
you connect via a USB hub. Always connect directly to the  
computer’s USB port.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
133  
Problem  
Possible Cause and Recommended Action  
Languageselection 1)You did not configure initial settings after purchasing the  
screen appears  
when the camera is  
turned on.  
camera or the camera may have been left with a dead  
battery. Check the camera setup (pages 18, 110).  
2)There may be a problem with the camera’s memory data. If  
this is the case, perform the reset operation to initialize the  
camera’s setup (page 113). After that, configure each setting.  
If the language selection screen does not re-appear when you  
turn the camera on, it means that the camera’s memory  
management data has been restored.  
If the same message appears after you turn power back on,  
contact your retailer or a CASIO authorized service center.  
I configured the  
date and time  
settings after  
purchasing the  
camera, but they  
become incorrect  
after I remove the  
battery from the  
camera.  
Load the camera’s battery and reconfigure the time and date  
settings (page 18). Do not remove the battery from the camera  
for at least 24 hours after configuring time and date settings.  
After that, the settings will not be reset if you remove the  
battery.  
• If you leave the battery loaded for more than 24 hours after  
setting the date and time, and they still become incorrect after  
you remove the battery, it could mean that the camera’s  
setting memory is defective. Contact your retailer or a CASIO  
authorized service center.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
134  
Display Messages  
The camera’s protection function may have activated  
ALERT  
because camera temperature is too high. Turn off the camera  
and wait until it cools down before trying to use it again.  
Battery is low.  
Battery power is low.  
There is something wrong with the memory card. Turn off the  
camera, remove the memory card and then reload it into the  
camera. If this message re-appears when you turn the  
camera back on, format the memory card (page 113).  
Card ERROR  
IMPORTANT!  
• Formatting a memory card deletes all its files. Before  
formatting, try transferring recoverable files to a computer  
or some other storage device.  
You are attempting to connect the camera to a printer while  
the camera’s USB settings are not compatible with the USB  
system of the printer (page 80).  
Check  
connections!  
Files could not be  
saved because  
battery is low.  
Battery power is low, so an image file could not be saved.  
You are trying to record a file while there are already 9999  
files stored in the 999th folder. If you want to record more,  
delete files you no longer need (page 27).  
Folder cannot be  
created.  
Images are being  
transferred.  
You are attempting to turn off power while image data is being  
Stop transfer and transferred using the Eye-Fi card (page 100).  
turn off power?  
This message appears and the camera turns off whenever  
lens performs some unexpected operation. If the same  
message appears after you turn power back on, contact a  
LENS ERROR  
CASIO authorized service center or your original retailer.  
Load paper!  
Memory Full  
The printer ran out of paper while printing.  
Memory is full with images you recorded and/or files saved by  
editing operations. Delete files you no longer need (page 27).  
An error occurred while printing.  
• The printer is turned off.  
• The printer generated an error, etc.  
Printing Error  
Record Error  
Image compression could not be performed for some reason  
during image data storage. Shoot the image again.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
135  
   
The lens came into contact with an obstruction while moving.  
The camera will turn off automatically when this message  
appears. Remove the obstruction and turn power back on  
again.  
RETRY POWER  
ON  
Your camera system is corrupted. Contact your retailer or a  
CASIO authorized service center.  
SYSTEM ERROR  
The LOCK switch of the SD or SDHC memory  
card loaded in the camera is in the locked  
position. You cannot store images to or delete  
images from a memory card that is locked.  
LOCK  
The card is  
locked.  
There are no files. There are no files in built-in memory or on the memory card.  
There are no  
There are currently no files specified for printing. Configure  
printing images.  
the required DPOF settings (page 82).  
Set up DPOF.  
This card is not  
formatted.  
The memory card loaded in the camera is not formatted.  
Format the memory card (page 113).  
This file cannot be The file you are trying to access is corrupted or is a type that  
played.  
cannot be displayed by this camera.  
This message will appear part way through an operation  
when you attempt to use a function that is not allowed in  
combination with another function.  
This function  
cannot be used.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
136  
Number of Snapshots/Movie Recording Time/  
Voice Recording Time  
Snapshot  
SD Memory Card  
(1GB) Snapshot  
Recording  
Built-in Memory  
Snapshot Recording  
Capacity  
Image Size  
(Pixels)  
Image  
Quality  
Approximate  
Image File Size  
Capacity  
12M  
(4000 3000)  
Fine  
Normal  
Economy  
Fine  
7.87 MB  
4.13 MB  
2.76 MB  
6.87 MB  
3.62 MB  
2.43 MB  
5.66 MB  
3.0 MB  
2
122  
x
3
5
233  
350  
140  
266  
397  
170  
322  
478  
210  
392  
545  
323  
561  
792  
483  
773  
1178  
2247  
3332  
4026  
3:2  
2
x
(4000 2656)  
Normal  
Economy  
Fine  
4
6
16:9  
(4000 2240)  
2
x
Normal  
Economy  
Fine  
5
2.02 MB  
4.59 MB  
2.46 MB  
1.77 MB  
2.99 MB  
1.72 MB  
1.22 MB  
2.0 MB  
8
8M  
3
x
(3264 2448)  
Normal  
Economy  
Fine  
6
9
5M  
5
x
(2560 1920)  
Normal  
Economy  
Fine  
9
13  
8
3M  
x
(2048 1536)  
Normal  
Economy  
Fine  
1.25 MB  
820 KB  
430 KB  
290 KB  
240 KB  
13  
19  
37  
56  
67  
VGA  
(640 480)  
x
Normal  
Economy  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
137  
   
Movies  
Built-in  
Memory  
Movie  
Recording  
Capacity  
SD Memory  
Card (1GB)  
Movie  
Recording  
Capacity  
Image  
Quality  
(Pixels)  
File Size of  
1-minute  
Movie  
Maximum  
File Size  
Approximate Data  
Rate (Frame Rate)  
WIDE  
848 480  
12.5 Megabits/second  
(30 frames/second)  
10 minutes  
8 seconds  
9 seconds  
10 seconds  
43 seconds  
93.1 MB  
79.0 MB  
19.9 MB  
x
Maximum  
Movie Size:  
4 GB  
STD  
10.6 Megabits/second  
(30 frames/second)  
11 minutes  
43 seconds  
x
640 480  
LP  
320 240  
2.7 Megabits/second  
(15 frames/second)  
46 minutes  
53 seconds  
x
Maximum  
Movie  
Length:  
YouTube  
640 480  
10.6 Megabits/second  
(30 frames/second)  
11 minutes  
43 seconds  
10 seconds  
79.0 MB  
x
10 minutes  
Voice Recording  
Built-in Memory  
Voice Recording  
Capacity  
SD Memory Card  
(1GB) Voice  
Recording Capacity  
MaximumFile  
File Format  
File Size  
Size  
WAV  
IMA-ADPCM  
50 minutes  
8 seconds  
49 hours  
31 minutes  
4 GB  
5.5 KB/second  
* Snapshot, movie recording capacity, and voice recording capacity values are  
approximate and intended for reference only. Actual capacity depends on image  
contents.  
* File size and data rate values are approximate and intended for reference only. Actual  
values depend on the type of image being shot.  
* The above values are based on use of a PRO HIGH SPEED SD memory card  
(Panasonic Corporation). The number of images you can save depends on the type of  
memory card you are using.  
* When using a memory card with a different capacity, calculate the number of images as a  
percentage of 1GB.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
138  
   
Specifications  
File Format  
Snapshots:  
JPEG (Exif Version 2.2); DCF 1.0 standard; DPOF compliant  
Movies:  
Motion JPEG AVI, IMA-ADPCM audio (monaural)  
Audio (Voice Recording): WAV (monaural)  
Recording Media  
Built-in Memory (Image Storage Area: 16.9MB)  
SD/SDHC  
Recorded Image Sizes Snapshot:  
12M (4000 3000), 3:2 (4000 2656), 16:9 (4000 2240),  
x
x
x
x
x
x
8M (3264 2448), 5M (2560 1920), 3M (2048 1536),  
x
VGA (640 480)  
Movies:  
x
x
x
WIDE (848 480), STD (640 480), LP (320 240),  
YouTube (640 480)  
x
Image Deletion  
Effective Pixels  
Imaging Element  
1 file; all files (with memory protection feature)  
12.10 Megapixels  
Size: 1/2.3-inch square pixel CCD  
Total Pixels: 12.53 Megapixels  
Lens/Focal Distance  
Zoom  
F3.1 (W) to 5.6 (T) f= 6.3 to 18.9 mm  
(equivalent to 35.5 to 106.5 mm in 35 mm format)  
Six lenses in five groups, including aspherical lens.  
3X optical zoom, 4X digital zoom (12X in combination with  
optical zoom)  
18.7X maximum HD Zoom (in combination with optical zoom,  
VGA size)  
Focusing  
Contrast Detection Auto Focus  
• Focus Modes:  
Auto Focus, Macro Focus, Pan Focus, Infinity, Manual Focus  
• AF Area: Spot, Multi, Tracking  
9
9
) (Wide Angle)  
Approximate Focus  
(Snapshot)  
(From Lens Surface)  
Auto Focus: 10 cm to  
(3.9" to  
Macro Focus: 10 cm to 50 cm (3.9" to 19.7") (Wide Angle)  
9
Infinity:  
(Wide Angle)  
9
9
) (Wide Angle)  
Manual: 10 cm to  
(3.9" to  
* Range is affected by optical zoom.  
Multi-pattern, center weighted, and spot by imaging element  
Program AE  
Metering  
Exposure Control  
Exposure  
–2.0 EV to +2.0 EV (in 1/3EV steps)  
Compensation  
Shutter  
CCD shutter, mechanical shutter  
Shutter Speed  
Snapshot (Auto): 1/2 to 1/2000 second  
Snapshot (Night Scene): 4 to 1/2000 second  
* May differ due to the camera setup.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
139  
 
Aperture Value  
White Balance  
F3.1 (W) to F7.8 (W) (When used with ND filter)  
* Using optical zoom changes the aperture value.  
Auto, Daylight, Overcast, Shade, Day White Fluorescent,  
Daylight Fluorescent, Tungsten, Manual WB  
Sensitivity (Standard Snapshots:  
Output Sensitivity,  
Recommended  
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600  
Movies: Auto  
Exposure Index)  
Self-timer  
Approximate Trigger Times:  
10 seconds, 2 seconds, Triple Self-timer  
Flash Modes  
Flash Range  
Auto, Off, On, Red-eye reduction  
Wide Angle: 0.1 m*2 to 2.9 m (0.3'*2 to 9.5')  
(ISO Sensitivity: Auto) Telephoto: 0.4 m to 1.6 m (1.3' to 5.2')  
1
*
*1 Range is affected by optical zoom.  
*2 Macro Focus  
Flash Charging Time Approximately 5 seconds maximum  
Recording  
Snapshots; Macro; Self-timer; Continuous Shutter (Normal  
Speed CS); BEST SHOT; Face Detection; easy Mode; Movies  
(normal movie and For YouTube) (with monaural audio); Audio  
(Voice Recording)  
Approximate  
Maximum Audio  
Recording Times  
After Recording: 30 seconds per image  
Voice Recording:  
50 minutes 8 seconds (when using built-in memory)  
Monitor Screen  
2.5-inch TFT color LCD  
230,400 (960 240) dots  
x
Viewfinder  
Monitor Screen  
Timekeeping Function Built-in quartz digital clock  
Date and Time: Recorded with image data  
Auto Calendar: To 2049  
World Time  
162 cities in 32 time zones  
City name, date, time, summer time  
Input/Output  
Terminals  
USB/AV port, Hi-Speed USB compatible  
Microphone  
Speaker  
Monaural  
Monaural  
x
Power Requirements Rechargeable lithium ion battery (NP-82 or NP-80)  
1
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
140  
B
   
Approximate Battery Life  
All of the values provided below represent the approximate amount of time under  
normal temperature (23°C (73°F)) before the camera turns off. These values are not  
guaranteed. Low temperatures shorten battery life.  
Number of Shots (CIPA) (Operating Time)*1  
Continuous Playback (Snapshots)*2  
Approximate continuous movie recording time  
Continuous Voice Recording*3  
200 shots  
5 hours  
1 hour 30 minutes  
4 hours 30 minutes  
• Battery: NP-82  
(The same battery life values also apply to the optionally available NP-80 battery.)  
• Recording Medium:  
1GB SD memory card (PRO HIGH SPEED (Panasonic Corporation))  
• Measurement Conditions  
*1 Approximate number of shots (CIPA) (Operating Time)  
In accordance with CIPA (Camera and Imaging Products Association) standards  
Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide and  
full telephoto every 30 seconds, during which two images are shot with flash; power  
turned off and back on every time 10 images are shot.  
*2 Approximate playback time  
Standard temperature (23°C (73°F)), one-image scroll approximately every 10 seconds  
*3 Approximate continuous recording time  
• The above values are based a new battery, starting from a full charge. Repeated  
charging shortens battery life.  
• Frequency of flash, zoom, and Auto Focus usage, and the time the camera is on  
greatly affects recording time and number of shots values.  
Power Consumption  
Dimensions  
3.7 V DC, Approximately 3.3 W  
x
x
98.8 (W) 57.3 (H) 20.4 (D) mm  
x
x
(3.9" (W) 2.3" (H) 0.80" (D))  
(18.5 mm (0.73") thick excluding projections)  
Weight  
131g (4.6 oz) (including battery and memory card)  
114g (4.0 oz) (excluding battery and memory card)  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
141  
 
. Rechargeable lithium ion battery (NP-82)  
Rated Voltage  
3.7 V  
Rated Capacitance  
710 mAh  
Operating Temperature  
Requirements  
0 to 40°C (32 to 104°F)  
x
x
Dimensions  
31.4 (W) 39.5 (H) 6.2 (D) mm  
x
x
(1.24" (W) 1.56" (H) 0.24" (D))  
Weight  
Approximately 15 g (0.53 oz)  
. Charger unit (BC-81L)  
Input Power  
100 to 240 V AC, 45 mA, 50/60 Hz  
Output Power  
4.2 V DC, 300 mA  
Operating Temperature  
Requirements  
5 to 35°C (41 to 95°F)  
Supported Battery Type  
Charging Time  
Rechargeable lithium ion battery (NP-82 or NP-80)  
210 minutes  
x
x
Dimensions  
52 (W) 20 (H) 79 (D) mm  
x
x
(2.0" (W) 0.79" (H) 3.1" (D)) (excluding projections)  
Weight  
Approximately 50 g (1.8 oz)  
• Power cord precautions for use in Singapore  
The power cord set is not supplied. The power cord used must comply with  
relevant national and/or international standards.  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
142  
CASIO COMPUTER CO.,LTD.  
6-2, Hon-machi 1-chome  
Shibuya-ku, Tokyo 151-8543, Japan  
MF  
MA1003-C  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Beyerdynamic Stereo Receiver SIR 320 User Manual
Bostitch Nail Gun FN1664 User Manual
Britax Car Seat BB0 651 User Manual
Broan Ventilation Hood 758 User Manual
Campbell Hausfeld Speaker System EZ111A User Manual
Canon Server A1200 User Manual
Carrier Air Conditioner 51QC QG User Manual
Casio Digital Camera EX S9 User Manual
Casio Watch QW 1444 User Manual
Chicago Electric Portable Generator 92456 User Manual