E
Digital Camera
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of Photo Transport, Dynamic
Photo Manager, or YouTube Uploader for CASIO.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Contents
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Monitor Screen Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
What is a digital camera? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
To turn power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
To turn off the camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
To shoot a snapshot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To delete a single file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To delete specific files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size) . . 38
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO) . . 41
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Flash) . . 44
Shooting with Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Interpreting the Zoom Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Using Continuous Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
4
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Recording a High-definition Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Recording a High Speed Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
What is BEST SHOT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Some Sample Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
To shoot an image with BEST SHOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Shooting with High Speed Night Scene
. . . . . . . .(High Speed Night Scene/High Speed Night Scene and Portrait) . . 72
Shooting Snapshots and Movies Digitally Processed for
Artistic Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (HDR Art) . . 74
To shoot a snapshot with HDR Art . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Configuring the Camera to Help You
Better Time Your Shots . . . . . . . . . . . . . . . . . . . . . . . . . . (Lag Correction) . . 79
Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
REC Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (REC) . . 87
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Focus). . . 87
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer). . . 90
Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . . . (AF Area). . . 92
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Displaying the On-screen Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Grid). . . 96
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Review). . . 96
Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help). . . 96
Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quality) . . 98
Specifying the Metering Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .(Metering). . . 99
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting). . . 99
Specifying Flash Intensity . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Intensity). . 100
Using Built-in Color Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Color Filter). . 100
Controlling Color Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . (Saturation). . 100
Adjusting Image Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Contrast). . 100
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Viewing a Panorama Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Deleting Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Displaying the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . 122
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Resize) . 123
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . 124
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
❚
Uploading Movie Files to YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Play back Dynamic Photo images on your EXILIM,
a computer, or on a mobile phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Transferring Images Automatically and
❚
Managing Them on Your Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 159
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
To replace the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
To replace the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
8
General Guide
The numbers in parentheses indicate the pages where each item is explained.
. Camera
Front
Back
bk bl bm 7 bn
1234 567
bo
bp
cl ck bt bs br bq
9
8
Zoom controller
[BS] (BEST SHOT)
Back lamp
[0] (Movie) button
(page 55)
Control button
bq
1
bk
bl
Shutter button (page 28)
Flash (page 44)
[ON/OFF] (Power)
(page 26)
Microphones (page 56)
[AUTO] button (page 28)
Strap holes (page 27)
Front lamp
([8] [2] [4] [6])
85)
2
3
4
[MENU] button
(page 85)
br
bs
bm
bn
[p] (PLAY) button
[SET] button (page 37)
[r] (REC) button
Monitor screen
(page 10)
5
6
7
8
Terminal cover
[USB/AV] port
bt
ck
Lens
bo
bp
9
cl
[HDMI OUT] HDMI
output (Mini) (page 111)
Bottom
Tripod hole
Use this hole when attaching to a tripod.
Speaker
cm
cn
co
cocn
cm
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Monitor Screen Contents
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
Remaining snapshot memory capacity
7
123456789
bk
bl
bm
bn
Number of recordable CS images
ISO sensitivity (page 41)
White balance setting (page 42)
Movie quality (FHD/STD movie)
movie) (page 58)
8
cm
cl
ck
bt
9
bk
bl
bm
bn
bo
bs br
bqbp
Flash (page 44)
bo
bp
bq
br
bs
bt
ck
cl
cm
Focus mode (page 87)
Continuous Shutter mode
(page 50)
Self-timer mode (page 90)
Image deterioration indicator
(page 47)
Timestamp indicator (page 158)
Battery level indicator (page 21)
Histogram (page 179)
Zoom (SR)/Multi SR Zoom indicator (page 48)
Face Detection (page 93)
1
2
3
4
5
Recording mode (page 28)
6
NOTE
• The semi-transparent gray frame on the monitor screen indicates the area that is
recorded when shooting a movie. The area within the frame is recorded for a
movie.
• If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not
correct, the setting will turn orange when you half-press the shutter button.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
. Movie Recording
Recording mode (page 55)
1
2
3
4
5
6
1 2 3
Movie recording time (page 55)
Movie recording in progress (page 55)
Recording speed (high speed movie) (page 58)
Battery level indicator (page 21)
4
5
6
7
7
. Snapshot Viewing
File type
1
2
3
4
5
6
7
8
9
bk
bl
bm
bn
bo
bp
bq
br
12 3 4
Protect indicator (page 120)
Snapshot image size (page 38)
Folder name/file name (page 152)
Snapshot image quality (page 98)
ISO sensitivity (page 41)
Aperture value
5
br
bq
bp
6
7
8
9
Shutter speed
Date/time (page 159)
Metering mode (page 99)
White balance setting (page 118)
Flash (page 44)
Battery level indicator (page 21)
Continuous Shutter mode (page 50)
Histogram (page 179)
bo bnbmblbk
Recording mode (page 28)
Download from Www.Somanuals.com. All Manuals Search And Download.
11
. Movie Playback
No audio data available
File type
1
2
3
4
5
6
7
8
9
123 4
Protect indicator (page 120)
Folder name/file name (page 152)
Movie recording time (page 101)
YouTube (page 62)
5
6
7
Date/time (page 159)
Battery level indicator (page 21)
9
8
. CS Image Viewing
Current image number/number of images in the
group (page 103)
1
1
2
Playback guide (page 103)
CS speed (page 103)
2
3
4
4
3
Turning Display Information On and Off (Info)
Each press of [8] (DISP) will cycle through display settings that
display or hide on-screen information and the control panel. You
can configure separate settings for the REC mode and PLAY
mode.
[8] (DISP)
Information on,
Displays setting information and the control panel.
control panel on
Displays setting information and the
control panel, and a histogram (page 179)
on the left side of the display. Also
displays the remaining movie recording
time as well as a movie image quality
icon.
Information on,
control panel on,
histogram on
Histogram
Information off,
control panel off
Hides setting information and the control panel.
• The control panel is not displayed and display information settings cannot be
changed during movie recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Quick Start Basics
What is a digital camera?
A digital camera stores images on a memory card, so you can record and
delete them a countless number of times.
Record
Delete
Play
You can use the images you record in a variety of different ways.
Store images on your
computer.
Print images.
Attach images to e-mail.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
13
What you can do with your CASIO camera
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following six main functions.
Blurred Background
This function analyzes a burst of consecutive images
and then blurs the background behind the main
subject. This creates an effect that really makes the
subject stand out, just like photographs taken with a
single-lens reflex camera.
Wide Shot
With this feature, a number of images are shot and
then combined to produce an image with a super-wide
angle of view that exceeds the widest angle of view
possible with the lens. Converted to 35 mm
equivalents, the focal distances available with this
feature enable shooting with approximate angles of
view of 17 mm and 21 mm.
HDR Art / HDR Art Movie
An HDR Art feature combines different parts of a burst
of images shot with different exposures into a final
image and performs high-precision image analysis to
produce final images that are true works of art. HDR
Art also can be used when shooting movies.
Premium Auto
Select Premium Auto recording and the
camera automatically determines whether you
are shooting a subject or scenery, and other
conditions. Premium Auto delivers higher
image quality than standard Auto.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
14
High Speed Movie
Movies can be recorded at up to 1000 frames per
second. This makes it possible to clearly view
phenomena that are invisible to the human eye, in
slow motion.
FHD Movie Recording
You can record movies in high-quality FHD.
x
(1920 1080 pixels 30 fps)
x
1920 1080 pixels
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
15
First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-110)
for power. Never try to use any other type of battery.
To load the battery
1. Open the battery cover.
Slide the battery cover slider towards OPEN
and then open it as indicated by the arrows in
the illustration.
2. Load the battery.
Stopper
With the EXILIM logo on the
battery facing upwards (in the
direction of the monitor screen),
hold the stopper next to the
battery in the direction indicated
by the arrow as you slide the
battery into the camera. Press the
battery in until the stopper
Battery contacts
secures it in place.
EXILIM logo
Back
Front
3. Close the battery cover.
Close the battery cover and then shift the
slider towards LOCK.
• For information about how to replace the
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Charge the Battery
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
1. Turn off the camera.
[ON/OFF] (Power)
Check to make sure that the camera’s monitor
screen is blank. If it isn’t, press [ON/OFF] (Power) to
turn off the camera.
2. After connecting the
USB cable (included with camera)
supplied USB cable
USB
to the USB-AC
adaptor, plug the
power cord into a
household power
outlet.
USB port
Power cord
USB-AC adaptor
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
17
3. Connect the USB
Terminal cover
USB-AC adaptor
cable to the camera.
The back lamp should
light red, indicating that
charging has started.
The back lamp will go out
when charging is
complete.
It takes about
190 minutes to bring a
fully dead battery to a full
charge.
USB cable
(included with camera)
[USB/AV] port
• A battery that has not
been used for a long
time, or ambient
Small connector
temperature extremes
can cause charging to
take longer than
normal. If charging
takes longer than
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
about six hours, a timer will terminate it automatically, even if the battery is not
fully charged. This is indicated by the back lamp flashing red. If the battery has
not been used for a very long time, charging may be terminated automatically
and the back lamp may start flashing red after only about 45 minutes. In either
case, disconnect the USB cable from the camera and then reconnect it to
resume charging.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
Back Lamp Operation
Back lamp
Lamp Status
Description
Lit Red
Charging
Abnormal ambient temperature, USB-
AC adaptor problem, battery problem,
or charging terminated by timer (page
Flashing Red
Off
Charging complete
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
18
4. After charging is complete, disconnect the USB cable from the camera
and then unplug the power cord from the power outlet.
. To charge using a USB connection to a computer
The battery loaded in the camera is charged whenever the camera is connected
directly to a computer with the USB cable.
• Depending on the setup of your computer, you may not be able to charge the
camera’s battery over a USB connection. If this happens, use of the USB-AC
adaptor that comes with the camera is recommended.
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.
1. Press [ON/OFF] (Power) to turn off the camera.
2. With your computer turned on, connect the camera to it.
USB port
USB cable (included with camera)
Large connector
[USB/AV] port
Small connector
Terminal
cover
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
The camera’s back lamp will light red. After a short while, the camera will turn on
automatically and the back lamp will light amber to indicate that charging has
started. The back lamp will light green when charging is complete. Note,
however, that some computer models or connection conditions can produce low
supply capacity. If low supply capacity exists, charging will start without the
camera turning on. This is indicated by the back lamp lighting red. The back lamp
will go out in this case after charging is complete.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
19
• A battery that has not been used for a long time, certain types of computers,
and connection conditions can cause charging to take more than
approximately six hours, which will trigger a timer that terminates charging
automatically, even if the battery is not fully charged. If this happens,
disconnect and then reconnect the USB cable to restart charging. To complete
charging faster, use of the included USB-AC adaptor is recommended.
• If the battery has not been used for a very long time, charging may terminate
automatically and the back lamp may start flashing red or go out after only
about 30 minutes to 45 minutes. In either case, use of the USB-AC adaptor that
comes with the camera is recommended.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
Back Lamp Operation
Back lamp
Lamp Status
Description
Lit Amber
Charging
Charging in progress (Data transfer with
computer not supported.)
Lit Red
Abnormal ambient temperature, battery
problem, or charging terminated by
timer (page 172)
Flashing Red/Off
Lit Green
Charging complete, or charging stopped
3. After charging is complete, disconnect the USB cable from the camera
and then from the computer.
NOTE
• Charging continues while a camera is connected to a computer’s USB port, even if
the camera is turned off. Under this condition, the back lamp operates as described
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
20
IMPORTANT!
• Charging is not performed while the connected computer is in the hibernate mode.
• A charging error can occur immediately after charging begins or some time after
charging begins. A charging error is indicated by the back lamp flashing red.
• If low supply capacity exists due to your computer model or connection conditions,
charging will start without the camera turning on. Turning on the camera in this
case will cause charging to stop and enter USB data communication between the
camera and the computer. The camera’s back lamp will be lit green at this time.
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s
battery (NP-110) without removing it from the camera. You also can charge the
battery using an optionally available charger unit (BC-110L). Never use any other
type of charger device. Attempting to use a different charger can result in
unexpected accident.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the USB-AC adaptor into an outlet that is further away from
the TV or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
Remaining Power
Battery Indicator
Indicator Color
High
Low
*
*
*
*
Cyan
*
Yellow
Red
*
Red
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about 30 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
159).
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (Flash Off) for the flash setting
• Enable the Auto Power Off and the Sleep features to protect against wasting
• Avoid unnecessary optical zoom operations.
Configuring Basic Settings the First Time You Turn On the
Camera
The first time you load a battery into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
the language you select may not be included with a camera intended for the
Japanese market.
• Camera models sold in certain geographic areas may not support display language
selection.
1. Press [ON/OFF] (Power) to turn on the
[ON/OFF] (Power)
camera.
[0] (Movie)
2. Use [8], [2], [4], and [6] to select the
language you want and then press
[SET].
3. Use [8] and [2] to select a date style and then press [SET].
Example: July 10, 2012
YY/MM/DD * 12/7/10
DD/MM/YY * 10/7/12
MM/DD/YY * 7/10/12
4. Set the date and the time.
Use [4] and [6] to select the setting you want to
change and then use [8] and [2] to change it.
To switch between 12-hour and 24-hour format, press
[0] (Movie).
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
22
5. After setting the date and time, use [4] and [6] to select “Apply” and
then press [SET].
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: page 160
– Date and time: page 159
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
• Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
Preparing a Memory Card
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
Supported Memory Cards
– SD Memory Card (Up to 2GB)
– SDHC Memory Card (2GB to 32GB)
– SDXC Memory Card (32GB to 2TB)
Use one of the above types of memory card.
• The above are supported memory card types as of August 2011.
• Noted memory card capacities are standard values.
• Use only SD cards that are compliant with the SD Card Association specification.
• This model does not support use of an Eye-Fi card.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
23
. Memory Card Handling Precautions
Certain types of cards can slow down processing speeds, and even can make it
impossible to store High Quality movies correctly. Also, use of certain types of
memory cards slows down data transfer and increases the time it takes to record
movie data, which can result in movie frames being dropped. The Y indicator on the
monitor screen turns yellow to indicate that frames are being dropped. In order to
avoid problems such as these, use of an Ultra High Speed Type SD memory card is
recommended. Note, however that CASIO makes no guarantees about the operation
of any Ultra High Speed Type SD memory card used with this camera.
To load a memory card
1. Press [ON/OFF] (Power) to turn off
the camera and then open the
battery cover.
Slide the battery cover slider towards
OPEN and then open it as indicated by
the arrows in the illustration.
2. Load a memory card.
Positioning the memory card so its front
is facing upwards (towards the monitor
screen side of the camera), slide it into
the card slot all the way in until you hear
it click securely into place.
Front
Front
Back
3. Close the battery cover.
Close the battery cover and then shift the
slider towards LOCK.
• For information about how to replace
the memory card, see page 174.
IMPORTANT!
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, remove the battery, and contact your retailer or nearest CASIO
authorized service center.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
24
To format (initialize) a new memory card
You need to format a new memory card before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a memory card on
a computer and then using it in the camera can slow down data processing by the
camera. In the case of an SD, SDHC, or SDXC memory card, formatting on a
computer can result in non-conformity with the SD format, causing problems with
compatibility, operation, etc.
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “Format” and then press [6].
3. Use [8] and [2] to select “Format” and then press [SET].
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Turning the Camera On and Off
To turn power on
[ON/OFF] (Power)
To turn on
Press [ON/OFF] (Power) or
power and enter [r] (REC).
the REC mode
To turn on
• The back lamp will light green
momentarily and the lens will extend
Press [p] (PLAY).
Back lamp
power and enter • The back lamp will light green
the PLAY mode
momentarily and an image currently
stored in camera memory will
appear on the monitor screen
• Take care to ensure that nothing is restricting or
coming into contact with the lens as it extends.
Holding the lens with your hand so it cannot extend
creates the risk of malfunction.
• Pressing [p] (PLAY) while in the REC mode
switches to the PLAY mode. The lens retracts about
10 seconds after switching modes.
[p] (PLAY)
[r] (REC)
automatically if you do not perform any operation for a preset amount of time.
To turn off the camera
Press [ON/OFF] (Power).
• You can configure the camera so power does not turn on when you press [r]
(REC) or [p] (PLAY). You also can configure the camera to turn off when you
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Holding the Camera Correctly
Your images will not come out
Horizontal
Vertical
clearly if you move the camera
when you press the shutter
button. When pressing the
shutter button, be sure to hold
the camera as shown in the
illustration, and keep it still by
pressing your arms firmly
against your sides as you shoot.
Holding the camera still,
carefully press the shutter button
and take care to avoid all
Hold the camera so the flash is above the lens.
movement as the shutter
releases and for a few moments after it releases. This is especially important when
available lighting is low, which slows down the shutter speed.
NOTE
• To protect against accidentally dropping
the camera and damaging it, attachment
and use of an optionally available wrist
strap or a sufficiently strong
Attach strap here.
commercially available camera wrist
strap is recommended.
Make sure to keep the strap around your
fingers or wrist while operating the
camera.
Flash
Front lamp
• Take care to make sure your fingers and
the strap do not cover any of the areas
indicated in the illustration.
• Never swing the camera around by the
strap.
• When the “Auto Rotate” setting is turned
on, the camera will detect whether it is
being held vertically or horizontally when
Lens
a snapshot image is shot. When you display an image shot with the camera held
vertically, the image is rotated automatically 90 degrees when displayed on the
monitor screen (page 155).
IMPORTANT!
• Take care to ensure that your fingers are not blocking or
are not too close to the flash. Fingers can cause unwanted
shadows when using the flash.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
27
To shoot a snapshot
Selecting an Auto Recording Mode
You can select one of two auto recording modes (Auto or Premium Auto) according to
your digital imaging needs.
R
Ÿ
Auto
This is the standard Auto recording mode.
With Premium Auto recording, the camera automatically
determines whether you are shooting a subject or scenery,
and other conditions. Premium Auto recording delivers higher
image quality than standard Auto recording.
Premium Auto
• It requires more power (and runs down the battery quicker)
than Auto.
1. Press [r] (REC) to turn on the camera.
The camera will enter the REC mode.
2. Use [AUTO] to select Auto recording mode.
Each press of [AUTO] toggles between Auto (R) and Premium Auto (Ÿ).
Auto recording mode icon
[
]
AUTO
Monitor screen
Shutter button
[r] (REC)
Remaining Snapshot Memory
Capacity (page 188)
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
28
To shoot a snapshot
1. Point the camera at the subject.
If you are using Premium Auto, text will appear in the
lower right corner of the monitor screen describing the
type of shot the camera has detected.
• You can zoom the image, if you want.
Appears when the
camera detects it is
stationary on a tripod.
w Wide Angle
z Telephoto
Zoom controller
2. Half-press the shutter button to
focus the image.
Back lamp
When focus is complete, the camera
will beep, the back lamp will light green,
and the focus frame will turn green.
Focus frame
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed at.
Mastering how much pressure is required for a
half-press and a full-press of the shutter button
is an important technique for good-looking
images.
Half-press
Press lightly
until the
button stops.
Beep, beep (Image is in focus.)
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
29
3. Continuing to keep the camera still,
press the shutter button the rest of
the way down.
Full-press
This records the snapshot.
Snap (Image is recorded.)
Recording a Movie
[0] (Movie)
Press [0] (Movie) to start movie recording. Press [0] (Movie)
again to stop movie recording. See the following pages for
details.
Standard movie (STD movie): page 55
High-definition movie (FHD movie): page 58
High speed movie (HS movie): page 58
Recording Beautiful Portraits (Make-up Function)
The Premium Auto Make-up Function smoothes the skin texture of the subject and
softens facial shadows caused by harsh sunlight for better looking portraits. There are
three different Make-up Level settings: Off, Standard, and High.
2. Press [SET].
3. Use [8] and [2] to select the third control panel option from the
bottom (Make-up Level).
4. Use [4] and [6] to select the Make-up Level setting you want, and then
press [SET].
• There are three available settings: “Off”, “Standard”, and “High”.
5. Shoot the image.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
30
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.
. Shooting with Auto
If the subject is not in the center of the frame...
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
To track the movement of a moving subject
Half-press the shutter button to follow and focus automatically on a moving subject.
. Shooting with Premium Auto
• In addition to shutter speed, aperture, and ISO sensitivity, the camera
automatically executes the following operation as required when shooting with
Premium Auto.
– Auto Focus is normally performed until you half-press the shutter button.
• Shooting with Premium Auto can cause vibration and noise to occur due to lens
operation. This does not indicate malfunction.
• In some cases, Premium Auto may not be able to interpret the shooting
environment correctly. If this happens, shoot with standard Auto.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Viewing Snapshots
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about images recorded using continuous shutter (CS), see page
1. Press [p] (PLAY) to enter the
PLAY mode.
• This will display one of the snapshots
currently stored in memory.
• Information about the displayed
• You also can clear the information to
[p] (PLAY)
• You can zoom in on the image by
snapshot that is very important to you, it is recommended that you zoom the
image and check its details after recording it.
2. Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
[6]
[6]
[4]
[4]
NOTE
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Deleting Snapshots and Movies
If memory becomes full, you can delete snapshots and movies you no longer need in
order to free up storage and record more images.
IMPORTANT!
• Remember that a file (image) delete operation cannot be undone.
• For information about images recorded using continuous shutter (CS), see page
To delete a single file
1. Press [p] (PLAY) to enter the PLAY mode and then
press [2] (
).
2. Use [4] and [6] to scroll through the files until the one
you want to delete is displayed.
3. Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 2 and 3.
• To exit the delete operation, press [MENU].
all of the images in the currently displayed CS group will be deleted.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
33
To delete specific files
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] (
).
2. Use [8] and [2] to select “Delete Files” and then press [SET].
• This displays a file selection screen.
3. Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
• This will select the check box of the currently selected file.
• You can enlarge the selected image before deleting it by sliding the zoom
controller towards z ([).
4. Repeat step 3 to select other files, if you want. After you are finished
selecting files, press [MENU].
5. Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select “No” in step 5 and then press [SET].
To delete all files
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] (
2. Use [8] and [2] to select “Delete All Files” and then press [SET].
).
3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files.
This will cause the message “There are no files” to appear.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Snapshot Shooting Precautions
Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
• If unwanted light is shining directly onto the lens, shade the lens with your hand.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Other Precautions
• The slower the shutter speed, the greater the possibility that noticeable noise will
be generated in an image. Because of this, the camera automatically performs a
noise reduction at slow shutter speeds. The noise reduction process causes it to
take longer to record images at lower shutter speeds. The shutter speeds for which
noise reduction is performed depend on the camera setup and shooting conditions.
• A noise reduction process is performed when ISO sensitivity is set to a high value.
This can cause the camera to take relatively longer to be ready to shoot again after
you press the shutter button. Do not perform any key operation while the image
recording operation is in progress.
• Due to the characteristics of the imaging element used by the camera, very fast
moving objects in an image may appear distorted.
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Auto Focus Restrictions
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Subject that is too far away for light from the AF assist light to reach
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
87).
Quick Start Basics
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Snapshot Tutorial
Using the Control Panel
The control panel can be used to configure camera settings.
1. In the REC mode, press [SET].
[8] [2] [4] [6]
[SET]
2. Use [8] and [2] to select the setting you want to change.
This will select one of the control panel icons and display its settings.*1
ISO sensitivity (page 41)
White balance (page 42)
EV shift (page 43)
Not displayed in this mode
Not displayed in this mode
Not displayed in this mode
Flash (page 44)
Control panel
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
Date/Time (page 45)
*1 Items displayed in the control panel depend on the recording mode.
*2 Image quality cannot be changed using the control panel.
3. Use [4] and [6] to change the setting.
4. If you want to configure another setting, repeat steps 2 and 3.
5. After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
• You can close the Control Panel by pressing [AUTO].
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
37
NOTE
default (reset) setting. An icon will appear only if you change the setting of the
corresponding Control Panel option. The following are the initial defaults for Control
Panel options.
– ISO Sensitivity: AUTO
– White Balance: Auto WB
– EV Shift: ±0
– Flash: Auto Flash
• You also can use on-screen menus to configure settings other than those listed
Changing the Image Size (Size)
. Pixels
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size)
through a print service, attaching an image to
e-mail, when viewing the image on a
computer, etc.
Pixel
. About image sizes
The size of an image indicates how many pixels it contains, and is expressed as
x
horizontal pixels vertical pixels.
x
16M (4608 3456) size image =
4608*
Approximately 16 million pixels
x
VGA (640 480) size image =
640*
Approximately 300,000 pixels
* Unit: pixels
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
38
Image Size Selection Tips
Note that larger images have more pixels, so they take up more memory space.
More detail, but takes up more memory. Best
when you plan to print large-size prints (such
as poster size).
Large Number
of Pixels
Small Number Less detail, but takes up less memory. Best
of Pixels
when you want to send images by e-mail, etc.
• For information about image size, image quality, and number of images that can be
stored, see page 188.
. To select the snapshot image size
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the top control panel option (Snapshot Image
Size).
3. Use [4] and [6] to select an image size and then press [SET].
Suggested
Image Size
(Pixels)
Print Size and
Application
Description
x
16M (4608 3456) Poster Print
Good detail for better clarity even for
original
x
3:2 (4608 3072)
Poster Print
x
16:9 (4608 2592) HDTV
x
10M (3648 2736) Poster Print
Good detail
x
5M (2560 1920)
A4 Print
Best when preserving memory capacity
is relatively more important than image
quality.
x
3M (2048 1536)
x
3.5" 5" Print
Image files are smaller, which is better
when attaching images to e-mail.
x
VGA (640 480)
E Mail
However, images are relatively coarser.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
39
• The initial factory default image size setting is 16M (16 million pixels).
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has
an aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio
of television screens of the past. Your camera can record images that are
compatible with the aspect ratio an HDTV screen.
• You should regard the print paper sizes suggested here as guidelines only
(200 dpi print resolution).
• Available image sizes are limited for some functions as noted below.
These image sizes cannot be selected when using some BEST SHOT
3:2,
16:9
scenes*1. Selecting “3:2” or “16:9” while one of the non-supported
BEST SHOT scenes*1 is selected will cause the image size setting to
change to “16M” automatically.
*1 High Speed CS, Child CS, Pet CS, Sports CS
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
40
Specifying ISO Sensitivity (ISO)
ISO sensitivity is a measure of sensitivity to light.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the second control panel option from the top
(ISO Sensitivity).
3. Use [4] and [6] to select the setting you want and then press [SET].
AUTO
Adjusts sensitivity automatically according to conditions
ISO 80
Lower
Slow shutter speed
Less noise
sensitivity
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
Fast shutter speed
Some coarseness
Higher
sensitivity
(Set for shooting in dimly (increased digital
lit areas.) noise)
• While “AUTO” is selected, Anti Shake corrects for subject movement only
• Higher ISO sensitivity values tend to result in digital noise in images.
• Since higher ISO sensitivity values tend to result in digital noise in images, the
camera performs a noise filtering process. Because of this, it may take
relatively longer for the camera to finish recording an image after it is shot. You
will not be able to perform any key operation while image recording is in
progress.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
41
Adjusting White Balance (White Balance)
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the third control panel option from the top
(White Balance).
3. Use [4] and [6] to select the shooting condition you want and then
press [SET].
‡
¤
Auto WB
Daylight
Configures the camera to adjust white balance automatically
For shooting outdoors on a clear day
For shooting outdoors on an overcast rainy day, in the
shade, etc.
'
“
Overcast
Shade
For shooting on a clear day in the shade of trees or buildings
For shooting under white or day white fluorescent lighting
†
DayWhite
Fluorescent
–
Daylight
Fluorescent
For shooting under daylight fluorescent lighting
For shooting under light bulb lighting
«
·
Tungsten
For configuring the camera manually to suit a particular light
source.
Select “· Manual WB”.
Blank white paper
1
2
Under the lighting conditions you plan
to use when shooting, point the
camera at a blank white piece of paper
so it fills the entire monitor screen and
then press the shutter button.
Press [SET].
Manual WB
3
The white balance setting is retained even if you turn off the
camera.
• When “‡ Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.).
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
42
Correcting Image Brightness (EV Shift)
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3EV
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the fourth control panel option from the top
(EV Shift).
3. Use [4] and [6] to adjust the exposure compensation value.
[6]: Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
[4]: Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
To cancel exposure compensation, change
the EV value to 0.0.
Exposure compensation value
4. Press [SET].
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
43
Using Flash (Flash)
1. In the REC mode, press [2] (
)
Flash
once.
2. Use [4] and [6] to select the flash
setting you want and then press
[SET].
[2] (
)
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
>
?
Auto Flash
Flash Off
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
<
Flash On
¥
Reduction
Red Eye
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
3. Press the shutter button to shoot.
Back lamp
Flashes red while the flash is charging to indicate that image
recording is disabled.
• You will not be able to take another flash snapshot until the
lamp stops flashing red, which indicates that charging is
complete.
< indicates the flash will fire.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
44
NOTE
• Take care so your fingers and the strap do not block the flash.
• The desired effect may not be obtained when the subject is too far away or too
close.
condition, ambient temperature, etc.).
• Shooting with flash turned off when lighting is dim results in a slow shutter speed,
which can cause image blur due to camera movement. Under such conditions,
secure the camera with a tripod, etc.
• With red eye reduction, the flash is fired automatically in accordance with
exposure. It does not fire in areas where lighting is bright.
• The presence of outdoor sunlight, fluorescent lighting, or some other light source
can cause abnormal image colors.
• Select ? (Flash Off) for the flash setting when shooting in areas where flash
photography is prohibited.
Red-eye Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. When red-eye reduction is selected as the flash
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the
image to close, which reduces the chance of red eye.
Note the following important points when using red-eye reduction.
• Red-eye reduction does not work unless the people in the image are looking
directly at the camera (flash).
• Red-eye reduction may not work very well if the subjects are located far away from
the camera.
Changing the Control Panel Date/Time Style
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the bottom control panel option (Date/Time).
You can use [4] and [6] to select date or time display.
NOTE
Day/Month.
• The time is displayed using 24-hour format.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
45
Shooting with Zoom
Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single
SR Zoom, Multi SR Zoom, and digital zoom. The maximum zoom factor depends on
the image size setting and the digital zoom on/off settings.
Optical zoom
HD Zoom
Changes the lens focal distance.
Allows greater zoom capabilities by cutting out a portion of the
original image and enlarging it.
Applies super resolution technology to suppress image
deterioration (page 48).
Single SR Zoom
Shoots a burst of High Speed CS images, which are then
combined into a final image to suppress image quality
deterioration across a range that is greater than Single SR
Zoom. (Multi SR Zoom is enabled by selecting the “Multi SR
Zoom” HS BEST SHOT scene.) (page 76)
Multi SR Zoom
Digital zoom
Digitally processes the center of the image to enlarge it.
1. In the REC mode, slide the zoom controller to zoom.
w Wide Angle
z Telephoto
Zoom controller
w (Wide Angle): Reduces the size of the subject and broadens the range.
z (Telephoto) : Enlarges the subject and narrows the range.
2. Press the shutter button to shoot the image.
NOTE
• Use of a tripod is recommended to protect against image blur due to camera
movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
• Except for High Speed Movie, zoom operations are supported during movie
recording. Zoom operations are disabled during high speed movie recording. To
use optical zoom, perform the zoom operation before you press [0] (Movie) to start
recording.
• Zoom operations are not supported during Slide Panorama shooting. The zoom
setting is fixed at full wide angle.
• Zoom operations are not supported during Wide Shot shooting. The zoom setting
is fixed at full wide angle.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
46
Interpreting the Zoom Bar
During a zoom operation, a zoom bar appears on the monitor screen to show the
current zoom setting.
Range where image deterioration is suppressed.
(optical zoom, HD Zoom,
Single SR Zoom, Multi SR Zoom)
Deteriorated image range
(digital zoom)
1X
28.0X to 111.6X
Zoom pointer
(Indicates current zoom.)
Optical zoom limit point
• 7X optical zoom point
Point from which image deteriorates
• The location of this point depends on the image size, the “Zoom (SR)”
setting, and whether Multi SR Zoom is enabled.
Point from which image
Zoom (SR) Setting
deteriorates
Off
7.0X to 50.4X
10.5X to 75.5X
Single (Single SR Zoom)
Multi SR Zoom
(HS BEST SHOT scene)
14.0X to 100.6X
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
47
. Zoom Icon
The appearance of the zoom icon on the monitor screen depends on the zoom factor.
Optical zoom
HD Zoom
Not displayed
Not displayed
ç (White)
(Orange)
Single SR Zoom
Multi SR Zoom
Digital zoom
ê
. Zoom Factor
zoom setting, and on whether or not the “Multi SR Zoom” BEST SHOT scene is
selected (page 76).
Multi SR Zoom is enabled by selecting the “Multi SR Zoom” BEST SHOT scene.
Maximum zoom factor where image
Total maximum zoom factor
deterioration can be suppressed
Image
size
Zoom(SR): Zoom(SR):
Multi SR
Zoom
Zoom(SR): Zoom(SR):
Multi SR
Zoom
Off
Single
10.5X
10.5X
10.5X
13.2X
18.9X
23.6X
75.5X
Off
Single
28.0X
28.0X
28.0X
35.4X
50.4X
62.9X
111.6X
16M
3:2
7.0X
7.0X
7.0X
8.8X
12.6X
15.8X
50.4X
14.0X
14.0X
14.0X
17.7X
25.2X
31.5X
100.6X
28.0X
28.0X
28.0X
35.4X
50.4X
62.9X
111.6X
28.0X
28.0X
28.0X
35.4X
50.4X
62.9X
111.6X
16:9
10M
5M
3M
VGA
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
48
Zooming with Super Resolution (Zoom (SR))
There are two types of Super Resolution Zoom: Single SR Zoom and Multi SR Zoom.
Single SR Zoom uses super resolution to expand the zoom range in which image
quality deterioration is minimized. Multi SR Zoom shoots a series of High Speed CS
images, which are then combined into final image to suppress image quality
deterioration across a range that is greater than Single SR Zoom. For information
about the effective zoom factor ranges in which Super Resolution Zoom is effective,
see page 48.
The procedure below shows how to configure Single SR Zoom settings. For
information about Multi SR Zoom, see page 76.
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select the “REC” tab.
3. Use [8] and [2] to select “Zoom (SR)” and then press [6].
4. Use [8] and [2] to select “Single” and then press [SET].
NOTE
• Single SR Zoom is effective when you want to capture delicate textures.
• Single SR Zoom does not work during movie recording.
• The following functions are disabled when shooting with Single SR Zoom.
Triple Self-timer, some BEST SHOT scenes
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
49
Using Continuous Shutter
To shoot with Continuous Shutter, press [BS] (BEST
SHOT) and then select the “High Speed CS” scene.
[BS] (BEST SHOT)
NOTE
• To return from the “High Speed CS” HS BEST
SHOT scene to the Single Shot mode, press
[AUTO].
Using High Speed CS and Prerecord CS
With High Speed CS, you can configure the camera to shoot at a speed of 3, 5, 10,
15, or 30 images per second, as long as you keep the shutter button and there is
memory available to store the images. With Prerecord CS, half-pressing the shutter
button starts continual pre-recording of images to a temporary buffer. Then when you
press the shutter button the rest of the way down, the camera stores what is currently
in the buffer and starts real-time continuous shutter recording of new images. Real-
time recording continues until you release the shutter button or until a total of up to
30 images (buffer images plus new images) are recorded. You can configure
Prerecord CS to specify how many of the 30 images are recorded in the buffer and
how many are recorded after you fully press the shutter button. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
Shutter button half-press
Shutter button full-press
Shutter button release
Recorded images (up to 30 images)
Continuous recording of images until shutter
button released*
Pre-recorded images
* You can record up to 30 images (pre-recorded buffer images plus real-time images) for
each Prerecord CS operation.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
50
• You can specify 5, 10, 20, or 30 as the maximum number of shots for each
continuous shutter operation.
• You can specify anywhere from 1 second up to 10 seconds as the continuous
shutter shooting time, which is the amount of time of the pre-record buffer plus the
amount of time that continuous shutter recording is performed after the shutter
button is pressed all the way. The maximum shooting time depends on the
selected CS speed. You can select a CS speed in the range of 3 to 30 fps.
30 images per second
You can shoot up to 30 images in 1 second.
(30 fps)
3 images per second
(3 fps)
You can shoot up to 10 images over 30 seconds.
• You can configure the mode so up to 25 images are pre-recorded to the buffer until
you fully press the shutter button.
• The minimum number of pre-recorded buffer images you can specify is three. Total
recording time depends on the current continuous shutter frames-per-second (fps)
setting.
• Specifying zero for the number of pre-recorded images disables Prerecord CS and
performs High Speed CS only (without pre-recording). Note that the mechanical
shutter is used when shooting with High Speed CS.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
51
1. In the REC mode, press [BS] (BEST SHOT).
High Speed CS icon
2. Use [8], [2], [4], and [6] to select “High
Speed CS” and then press [SET].
• This will display Š (High Speed CS).
3. Press [SET].
4. Use [8] and [2] to select the fourth control
panel option from the bottom (High Speed CS fps).
5. Use [4] and [6] to select the continuous shutter
CS speed
(CS) speed you want.
Enables specification of the number of CS images recorded per
second.
3 to 30 fps
6. Use [8] and [2] to select the third control panel
option from the bottom (Max CS shots).
7. Use [4] and [6] to select the maximum number of shots for each
continuous shutter operation.
8. Use [8] and [2] to select the second control panel option from the
bottom (Prerecord CS shots).
9. Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• Prerecord CS shooting is not performed when the number of buffer images and
the recording time are both zero. Note that the mechanical shutter is used
when shooting with High Speed CS.
Shutter button full-press
Number of pre-record
images and pre-record
time
Number of remaining images
and remaining recording time
after the shutter button full-
press
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
52
10. Press [SET].
• The approximate number of recordable CS images will appear on the monitor
screen.
Number of recordable CS images (If you are not performing
Prerecord CS, the allowable continuous shutter time also is displayed.)
Remaining snapshot memory capacity
11. Half-press the shutter button.
This will cause the camera to start pre-recording images.
• The camera will not emit a shutter sound when you half-press the shutter
button while Prerecord CS is selected.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the pre-recorded images currently in the buffer will be deleted.
12. When you are ready to shoot, press the shutter button the rest of the
way down.
This will record the images in the pre-record buffer and start recording new
images in real-time. Images continue to be shot as long as you keep the shutter
button depressed.
13. Real-time shooting will stop when you release the shutter button or
after the maximum number of shots is reached.
NOTE
• Note the following when selecting a High Speed CS speed (fps) setting.
– Use a higher High Speed CS speed (fps) setting when shooting a fast-moving
subject.
– Use a slower High Speed CS speed (fps) setting when shooting a slower-moving
subject.
• Note the following when selecting a High Speed CS maximum number of shots
setting.
– The greater the number of shots, the longer it takes to save them after shooting
is complete.
• Note the following when specifying a Prerecord CS shots setting.
– A setting that results in a Prerecord CS operation that takes at least 0.3 seconds
is recommended because there is a minimal lag from about 0.1 seconds to
0.3 seconds between the point you decide to shoot and the point that the shutter
button is fully depressed.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
53
Continuous Shutter Precautions
• When shooting CS images, the snapshot image quality automatically changes to
“Normal”.
• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With High Speed CS, exposure and focus for the first image are applied for
successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• With High Speed CS, the flash setting automatically becomes ? (Flash Off).
• Zoom is disabled during continuous shutter operations.
• The following image sizes cannot be selected while shooting with High Speed CS:
“3:2”, “16:9”. Entering the High Speed CS mode while any one of these image
sizes is selected will cause the image size setting to change to “16M”
automatically.
• With High Speed CS, the maximum number of images that can be recorded during
each session is limited, regardless of how much memory card storage capacity is
available.
Specified maximum number of continuous shutter shots
(Max CS shots)
High Speed CS
The number of images will be restricted even further or shooting may be impossible
when remaining memory card capacity is less than the allowable number of images
for a particular CS mode.
• The Triple Self-time cannot be used in the High Speed CS mode.
• The Self-timer cannot be used in the Prerecord CS mode.
• Continuous Shutter (CS) shooting is not supported while Premium Auto is being
used.
• Single SR Zoom and Multi SR Zoom cannot be used in combination with High
Speed CS.
Download from Www.Somanuals.com. All Manuals Search And DownSlonaapds.hot Tutorial
54
Recording Movies
To record a movie
The following procedure explains how to record a standard (STD) movie.
See the pages indicated below for more information about movies.
High-definition movie (FHD movie): page 58
[0] (Movie)
High speed movie (HS movie): page 58
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select the “Quality” tab.
3. Use [8] and [2] to select “» Quality” and
then press [6].
[MENU]
4. Use [8] and [2] to select “STD” (Standard),
and then press [SET].
• Recording is performed with an aspect ratio of
x
4:3, an image size of 640 480 pixels, and a
frame rate of 30 frames per second (STD Movie).
Image size setting cannot be changed.
• The semi-transparent gray frame on the monitor
screen indicates the area that is recorded when
shooting a movie. The area within the frame is
recorded for a movie.
Semi-transparent gray
frame
5. Press [0] (Movie).
Remaining recording time
(page 189)
This will start recording and display Y on the
monitor screen.
Movie recording includes stereo audio.
6. Press [0] (Movie) again to stop recording.
• Each movie can be up to 29 minutes long. Movie
recording stops automatically after 29 minutes of
recording. Movie recording also will stop
automatically if memory becomes full before you
stop movie recording by pressing [0] (Movie)
again.
Recording time
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Shooting with BEST SHOT
of movie you are trying to shoot and the camera will change its setup accordingly, for
beautiful movies every time. Selecting the “Natural Green” BEST SHOT scene, for
example, will shot images with vivid green trees and grass.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during
image blur due to subject movement.
Audio
Your camera has built-in microphones that can be used to record audio (stereo)
during movie recording.
• Your camera has a function to reduce wind noise (Wind Noise Cut) when recording
. Recording Precautions
The camera also records audio. Note the following points
when shooting a movie.
Microphones
– Take care that the microphones are not blocked by your
fingers, etc.
– Good audio recording results are not possible when the
camera is too far away from what you are trying to
record.
– Performing a zoom operation while shooting can cause zoom and/or auto focus
noise to be in the audio recording.
– Operating camera buttons while shooting can cause button noise to be picked
up in the audio.
• When shooting with the “HS” movie mode at a frame rate setting of “30-120 fps” or
“30-240 fps”, audio is recorded only while the camera is shooting at 30 fps. Audio is
not recorded at any other frame rates.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
56
IMPORTANT!
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
• Shooting movies for long periods in areas where temperature is relatively high can
cause digital noise (dots of light) to appear in the movie image. A rise in the
camera’s internal temperature also may force movie recording to stop
automatically. If this happens, stop recording and allow the camera to cool down,
which should cause normal operation to resume.
• Shooting a movie using the camera’s built-in memory will cause movie frames to
be dropped. Always use a high speed memory card (not built-in memory) for movie
recording.
• Use of certain types of memory cards slows down data transfer and increases the
time it takes to record movie data, which can result in movie frames being dropped.
The Y indicator on the monitor screen turns yellow to indicate that frames are
being dropped. In order to avoid problems such as these, use of an Ultra High
Speed Type SD memory card is recommended. Note, however that CASIO makes
no guarantees about the operation of any Ultra High Speed Type SD memory card
used with this camera.
NOTE
• Except for High Speed Movie, zoom operations are supported during movie
optical zoom for high speed movie recording, perform the zoom operation before
you press [0] (Movie) to start recording.
movie recording.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.
recording while “Auto Focus” or “Macro” is selected for the “Focus” setting.
• During High Speed Movie recording (HS120, HS240, HS480, HS1000), focus is
fixed at the position where it was when recording started. To focus an image, half-
press the shutter button for Auto Focus or focus manually before you press [0]
(Movie) to start recording.
• Continuous AF is operational when recording at 30 fps with “HS30-120” or
“HS30-240”. However, focus becomes fixed whenever you switch to 120 fps or
240 fps.
• Face Detection is disabled during movie (FHD, STD, high speed) recording.
• The following BEST SHOT scenes are always shot using high speed movie. The
current “» Quality” setting is ignored.
Child High Speed Movie, Pet High Speed Movie, Sports High Speed Movie
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Recording a High-definition Movie
This camera supports recording of high-definition (FHD) movies. The aspect ratio of
x
an FHD movie is 16:9, the image size is 1920 1080 pixels, and the frame rate is
30 fps. Image quality and image size settings cannot be changed.
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select the “Quality” tab.
3. Use [8] and [2] to select “» Quality” and then press [6].
4. Use [8] and [2] to select “FHD”, and then press [SET].
5. Record the movie the same way as you would a normal movie (page
55).
Press [0] (Movie) to start and stop recording.
Recording a High Speed Movie
This camera supports recording of high speed movies at a maximum speed of
1000 fps. The aspect ratio of movies recorded with this mode depends on the frame
rate (recording speed).
• When recording with the frame rate setting of “30-120 fps” or “30-240 fps” frame
rate setting, audio recording is supported during 30 fps recording only. Audio is not
recorded at any other frame rates.
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select the “Quality” tab.
3. Use [8] and [2] to select “» Quality” and then press [6].
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
58
4. Use [8] and [2] to select the frame rate (recording speed) you want
and then press [SET].
A fast frame rate (such as 1000 fps) will result in a smaller image size.
Image Size
(Pixels)
» Quality
Frame Rate
x
640 480
HS120
HS240
120 fps
240 fps
x
512 384
x
224 160
HS480
480 fps
* fps (frames per second) is
a unit of measurement
indicating the number of
images recorded or
x
224 64
HS1000
HS30-120
HS30-240
1000 fps
30-120 fps
30-240 fps
x
640 480
x
512 384
played back per second.
5. Record the movie the same way as you would a normal movie (page
55).
Press [0] (Movie) to start and stop recording.
• During High Speed Movie recording (HS120, HS240, HS480, HS1000), focus
is fixed at the position where it was when recording started. To focus an image,
half-press the shutter button for Auto Focus or focus manually before you press
[0] (Movie) to start recording.
• Continuous AF is operational when recording at 30 fps with “HS30-120” or
“HS30-240”. However, focus becomes fixed whenever you switch to 120 fps or
240 fps.
• When “HS30-120” or “HS30-240” is selected as the frame rate, recording
always starts with a frame rate of 30 fps. You can switch the frame rate
between 30 fps and 120 fps or between 30 fps and 240 fps only while recording
is in progress. Audio is recorded only while shooting at a 30 fps. Use [4] and
[6] or press [SET] to switch speeds.
NOTE
• The higher the frame rate (speed), the more lighting is required when shooting.
When shooting a high speed movie, shoot in a well-lit environment.
• When recording certain types of movies, the image that appears on the monitor
screen may be smaller than normal. When recording a high speed movie, there are
black bands along the top, bottom, left, and right of the screen.
• When recording a high speed movie, light source flicker can cause horizontal
bands to appear in the image. This does not indicate malfunction of the camera.
• Monitor screen content switching is disabled during high speed movie recording.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Using Prerecord Movie (Prerecord (Movie))
With this feature, the camera pre-records up to five seconds of whatever is happening
in front of the lens in a buffer that is continually updated. Pressing [0] (Movie) saves
the pre-recorded action (buffer contents) followed by real-time recording. Real-time
recording continues until you stop it. Prerecord Movie can be used when shooting a
standard (STD) movie, a high-definition (FHD) movie, or a high speed (HS) movie.
• When using Prerecord Movie in combination with high speed movie, the buffer will
store two seconds of pre-recording instead of the usual five.
[0] (Movie)
[0] (Movie)
Movie
Real-time recording start
Real-time recording end
5-second prerecorded part (from the buffer)
* Approximately two seconds for high speed movie
. To set up the camera to shoot with Prerecord Movie
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select the “Quality” tab.
3. Use [8] and [2] to select “» Quality” and then press [6].
4. Use [8] and [2] to select the movie mode you want to use for
shooting.
5. Press [SET].
6. Press [BS] (BEST SHOT).
7. Use [8], [2], [4], and [6] to select the “Prerecord (Movie)” scene and
then press [SET].
This causes ‰ (Prerecord (Movie)) to appear on the monitor screen, indicating
that the camera is prerecording to its buffer.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
60
. To shoot a Prerecord Movie
1. After using the above procedure to set up the camera for Prerecord
Movie, point the camera at the subject.
2. When you are ready to record, press [0] (Movie).
This will save the approximately five seconds of action that was prerecorded in
the buffer before you pressed [0] (Movie) (two seconds if you are using high
speed movie) and start real-time recording.
3. Press [0] (Movie) again to stop recording.
• To stop Prerecord (Movie) recording and return to snapshot shooting, select a
• When shooting with the high speed movie “HS30-120” and “HS30-240” setting,
you cannot change the speed (fps) setting while the camera is pre-recording to
the buffer in step 1 of the above procedure. You can change the speed (fps)
setting after you press [0] (Movie) to start real-time recording.
NOTE
• While the camera is set up for shooting with Prerecord Movie, pressing the shutter
button will not shoot a snapshot unless movie recording is in progress. With high-
definition (FHD) and standard (STD) movie, you can shoot still images while real-
time movie recording is in progress.
• When shooting with Prerecord Movie in combination with high speed movie,
pressing the [4] or [6] key will not change the EV shift or white balance setting,
even if “EV Shift” or “White Balance” is assigned for the “L/R Key” function. To
change the EV shift or white balance setting in this case, use the control panel.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Recording a Movie for YouTube (For YouTube)
The “For YouTube” scene records movies in a format that is optimal for uploading to
the YouTube movie site, which is operated by YouTube, LLC. “For YouTube” can be
used when shooting a standard (STD) movie, a high-definition (FHD) movie, or a high
speed (HS) movie.
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select the “Quality” tab.
3. Use [8] and [2] to select “» Quality” and then press [6].
4. Use [8] and [2] to select the movie mode you want to use for
shooting.
5. Press [SET].
6. Press [BS] (BEST SHOT).
7. Use [8], [2], [4], and [6] to select the “For YouTube” scene and then
press [SET].
This causes
to appear on the monitor screen.
8. Record the movie.
The movie file will be stored in a camera folder named “100YOUTB”.
• Installing YouTube Uploader for CASIO simplifies uploading of movie files you
recorded with the “For YouTube” scene to YouTube (page 144).
• To stop “For YouTube” recording and return to snapshot shooting, select a
NOTE
• Movies recorded with the “For YouTube” scene are stored in a special folder to
shot using the image size, recording speed, and quality settings configured in the
Movie mode (page 55).
• Snapshots cannot be shot (regardless of whether you are recording or not) while
the “For YouTube” scene is selected.
• A single movie can have a maximum file size of 2,048MB or a playback time of
15 minutes. The actual maximum recording time depends on the movie mode used
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Shooting a Snapshot while Shooting a Movie
You can shoot snapshots while movie recording is in progress. When the camera is in
the Single Shot mode, you can shoot snapshots one-by-one. In the CS mode, holding
down the shutter button will record up to seven consecutive images at a speed of
approximately 10 images per second (fps). You can shoot a maximum total of
28 images during a single movie recording operation.
1. While a movie is being recorded, press the
shutter button.
• In the CS mode, images continue to be shot as long
as you keep the shutter button depressed.
• Movie recording is not interrupted while snapshots
are being shot.
• While movie recording is in progress, you can toggle
Number of recordable
snapshots
between the Single Shot mode and the CS mode by
pressing [4], [6], or [SET]. Note that this method
for mode switching is possible only during movie
recording. The CS mode is indicated when
is
red (on the monitor screen), and the Single Shot
mode is selected when t is red.
NOTE
• You can shoot up to 28 snapshots per movie. The number of snapshots is also
limited by the amount of free space available on the memory card.
• Note that the flash cannot be used when shooting a Snapshot in Movie.
• Note that shooting a snapshot while shooting a movie is supported during FHD
movie and STD movie recording only. It is not supported during other types of
movie recording.
• Snapshots shot with Snapshot in Movie cannot be focused individually. The focus
will be the same as the movie being recorded.
• The field of view of a snapshot shot while FHD movie recording is in progress will
be wider than the field of view of the FHD movie.
• When shooting a snapshot during movie recording, the snapshot image quality
automatically changes to “Normal”.
• The t (Auto) recording mode is used when you shoot a snapshot during movie
recording.
Recording Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Using BEST SHOT
What is BEST SHOT?
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
Some Sample Scenes
High Speed
High Speed
Night Scene
Portrait
Scenery
Night Scene and
Portrait
To shoot an image with BEST SHOT
1. In the REC mode, press [BS]
[8] [2] [4] [6]
[BS] (BEST SHOT)
(BEST SHOT).
This will display a menu of BEST
SHOT scenes.
2. Use [8], [2], [4], and [6] to
move the boundary to the scene
you want to select.
Currently selected scene
(with boundary)
[SET]
• The scene menu has multiple
pages. Use [8] and [2] to scroll
between menu pages.
• To return to normal snapshot
recording, press [AUTO].
Scene name
Scene number
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
64
3. Press [SET] to configure the camera with the settings for the currently
selected scene.
This returns to the REC mode.
• The settings of the scene you selected remain in effect until you select a
different scene.
• To select a different BEST SHOT scene, repeat the above procedure from
step 1.
4. Press the shutter button (if you are shooting a snapshot) or [0] (Movie)
(if you are shooting a movie).
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then slide the zoom controller in
either direction.
• To return to the scene menu, slide the zoom controller
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently
selected scene, press [SET].
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
65
. BEST SHOT Precautions
• Sample images shown on BEST SHOT scene screens were not shot with this
camera. There are provided to illustrate the effects and merits of each scene.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
• Snapshot shooting is disabled while the following BEST SHOT scenes are being
used.
Prerecord (Movie), For YouTube, BEST SHOT movie scenes
• Movie recording is disabled while the following BEST SHOT scenes are being
used.
HDR, HDR Art, Multi SR Zoom, Slide Panorama, High Speed Best Selection,
Lag Correction, High Speed Anti Shake, Blurred Background, Wide Shot
• FHD movie and STD movie recording are disabled (and high speed movie is
always enabled) while the following BEST SHOT scenes are being used.
Child High Speed Movie, Pet High Speed Movie, Sports High Speed Movie
• The “3:2” and “16:9” image size settings are not supported by BEST SHOT scenes
that use High Speed CS. Selecting “3:2” and “16:9” in another mode and then
selecting a BEST SHOT scene that uses High Speed CS will cause the image size
setting to change to “16M”.
• When the movie mode is FHD/STD, movies are recorded using the settings of the
selected BEST SHOT scene. For high speed movie recording, BEST SHOT scene
settings are ignored and movie recording is performed as it normally is.
• BEST SHOT scenes that use High Speed CS ignore the “Zoom (SR)” setting.
• With the BEST SHOT scenes below, certain shooting conditions can cause the
image area to become narrower than normal.
HDR, HDR Art, High Speed Night Scene and Portrait
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
66
Creating Your Own BEST SHOT Setups
You can save up to 999 camera setups as user BEST SHOT scenes for instant recall
whenever you need them.
1. Select the “BEST SHOT (Register User Scene)” BEST SHOT scene.
2. Use [4] and [6] to select the snapshot whose setup you want to save.
3. Use [8] and [2] to select “Save”, and then press [SET].
Your BEST SHOT scene will be assigned the name “Recall User Scene”, along
with a scene number.
NOTE
• You can create BEST SHOT setup for snapshots only. You cannot create a movie
BEST SHOT setup.
• You can check the settings of the currently selected BEST SHOT scene by
displaying the camera’s setting menus and looking at its settings.
• User snapshot scenes are assigned numbers in the sequence: U1, U2, and so on.
• The following are the settings that are saved for each user snapshot BEST SHOT
scene.
Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting,
Flash Intensity, Color Filter, Sharpness, Saturation, Contrast
folder (snapshots).
scenes.
• Use the following procedure when you want to delete a user BEST SHOT scene.
want to delete.
1
Press [2] (
), select “Delete”, and then press [SET].
2
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
67
Shooting with a Blurred Background (Blurred Background)
This function analyzes a burst of consecutive images and then blurs the background
behind the main subject. This creates an effect that really makes the subject stand
out, just like photographs taken with a single-lens reflex camera.
Shot with “Auto”.
Shot with “Blurred Background”.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “Blurred Background” and then press [SET].
3. Press the shutter button to shoot.
• Get as close as possible to the subject. Also, the background should be as far
away as possible from the subject. The required distances depend on the
zoom factor being used.
Example: When zoom is set to full wide (W), the distance between the camera
and subject should be 30 to 50cm (1.0' to 1.6'), while the distance
between the subject and background should be at least 1 meter (3.3').
• This will cause the message “Busy... Please wait...” to appear. Do not move
the camera while this message is displayed. The recording process takes
some time to complete after the message appears.
NOTE
function.
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• The desired background blur effect may not be attained if the camera or subject
moves during shooting.
• Depending on the shooting environment, image composition, and subject, this
BEST SHOT scene may not be able to produce the desired result.
• If the camera determines that it is unable to blur the background of an image for
some reason, it will display the message “Blur processing failed.”. Note, however,
that the image will be saved, even if background blurring is not possible.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
68
Shooting with a Super Wide Angle of View (Wide Shot)
With this feature, a number of images are shot and then combined to produce an
image with a super-wide angle of view that exceeds the widest angle of view possible
with the lens. Converted to 35 mm equivalents, the focal distances available with this
feature enable shooting with approximate angles of view of 17 mm and 21 mm.
28 mm (lens widest angle)
Wide 1 (21 mm)
Wide 2 (17 mm)
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “Wide Shot” and then press [SET].
3. Press [SET] and then use [8] and [2] to select the width setting, which
is the fifth Control Panel setting from the top.
4. Use [4] and [6] to select the width setting (angle of view) you want and
then press [SET].
There are two settings available: “Wide 1 (21 mm)” and “Wide 2 (17 mm)”.
“17 mm” shoots a wider area than “21 mm”.
5. Hold the camera so it is
upright, with the shutter
button and other
controls at the bottom.
• Do not point the camera
straight down at the
ground at this time. If you
Control button
Shutter button
do, the camera’s built-in
vertical/horizontal position
sensor will not operate
properly and may make it
impossible to start
shooting.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
69
6. Point the camera at the
subject you want in the
center of the image and
then half-press the
shutter button to focus.
• The outer blue boundary
on the screen indicates the
recordable range of the
image.
Desired image
Blue boundary
Center part at the start of
the shooting operation
7. Press the shutter button the rest of the way
down and slowly move the camera in
accordance with the instructions and arrow
that appear on the monitor screen.
• Holding the camera firmly with both hands, follow
the instructions that appear on the monitor screen
to slowly slide the camera horizontally or vertically
in an arc centered on your body.
– When sliding the camera horizontally, do not
allow your body to move left or right. A vertical
line running through your body should serve as
the axis.
Arrow
Instructions
– When sliding the camera vertically, do not allow your body to move upwards
or downwards. A horizontal line between your shoulders should serve as the
axis.
– Take care not to slide the camera diagonally and be sure to maintain a firm
grip on it.
• The camera will start composing the super-wide image internally when the
slide cursor reached the other end of the movement range.
• Image composing also will start automatically if you stop moving the camera
during super-wide shooting. After you stop moving the camera, the message
“Busy... Please wait...” appears as the camera processes the image. Wait until
this message disappears before using the camera. Image shooting is disabled
while the message is displayed.
NOTE
• The “17 mm” and “21 mm” angle of view values are approximate and are provided
for reference only. Actual angle of view values are not guaranteed.
• Zoom operations are not supported during Wide Shot shooting. The zoom setting
is fixed at full wide angle.
• This function makes it possible to shoot images with a maximum angle of view of
17 mm or 21 mm. Note, however, that shooting conditions can result in a smaller
angle of view.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
70
• The following conditions are not compatible with Wide Shot shooting.
– Subject whose brightness is very different from that of its surroundings due to
artificial light, sunlight, etc.
– Rivers, waves, waterfalls, or other subject with constantly changing patterns
– Sky, beach, or other subject with continuous patterns
– Camera too close to the main subject
– Moving subject
– Panning upwards on a skyscraper or some other very tall structure or object
• Any of the following can cause Wide Shot operation to stop part way through.
– Subject or camera movement
– Camera movement that is too fast or too slow
– Camera movement outside of the required route
– Camera movement in the wrong direction
• Shooting a Wide Shot image after half-pressing the shutter button to perform Auto
Focus may not produce the desired results if there are considerable differences in
the brightness, color, and/or focus of the individual images. If this happens, try
changing the focus position by focusing on a different subject, etc.
• Since a Wide Shot image is created by joining multiple images together, there may
be some roughness at the point where two images are joined.
• Shooting under a flickering light source (such as fluorescent lighting) may result in
uneven brightness and/or coloring in the final Wide Shot image.
• Shooting in dark surroundings may result in a blurred image or may make Wide
Shot shooting impossible.
• Slowly move the camera at a constant speed in the same direction as the arrow
that appears on the monitor screen.
• The exposure and white balance when shooting Wide Shot images are fixed at the
levels measured when you half-press the shutter button at the beginning of the
operation.
• An error message will appear if the camera is unable to successfully record a
series of images.
• If you shoot a moving subject, the camera may not be able to compose the super-
wide image properly.
• Super-wide may not produce the desired results when shooting at close distances
to the subject.
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
71
Shooting with High Speed Night Scene
(High Speed Night Scene/High Speed Night Scene and
Portrait)
With High Speed Night Scene and High Speed Night Scene and Portrait, the camera
detects automatically whether it is being hand-held or on a tripod. If the camera
detects it is being hand-held, pressing the shutter button will record a series of
images and combine them in a way that minimizes image blur due to low light
conditions. If the camera detects it is on a tripod, it will shoot a single image using a
longer exposure time (instead of shooting and combining multiple images), which
results in an even clearer image. The flash is always disabled while “High Speed
Night Scene” is selected. If the night scene image you are shooting includes people,
use the “High Speed Night Scene and Portrait” BEST SHOT scene. The flash mode
setting becomes > (Auto Flash) when shooting with “High Speed Night Scene and
Portrait”.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “High Speed Night Scene” or “High Speed Night Scene and
Portrait” and then press [SET].
3. When you are ready to shoot, press the shutter button.
NOTE
• When holding the camera by hand while shooting with these BEST SHOT scenes,
make sure that the subjects remain as still as possible as the camera shoots the
series of images.
• Even when holding the camera by hand while shooting with “High Speed Night
Scene and Portrait”, under certain conditions the camera may shoot only a single
image instead of a series of images.
• When shooting with “High Speed Night Scene and Portrait”, camera movement will
cause anti shake to be performed, which can cause the image area to become
narrower than normal.
• Movement while the camera is mounted on a tripod may cause the camera to
erroneously judge it is being hand held.
• If surroundings are extremely dark when shooting with “High Speed Night Scene”
or “High Speed Night Scene and Portrait”, the camera may not be able to shoot at
proper brightness due to insufficient exposure.
• When shooting with these BEST SHOT scenes, the “ISO Sensitivity” setting is fixed
at “AUTO”.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
72
Shooting with High Speed Anti Shake
(High Speed Anti Shake)
When you press the shutter button while High Speed Anti Shake is enabled, the
camera records multiple images and automatically combines them in a way that
produces a final image with minimal blur. You can shoot with this feature to minimize
the effects of camera movement when shooting with optical anti shake does not
produce the desired results.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “High Speed Anti Shake” and then press [SET].
3. When you are ready to shoot, press the shutter button.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• High Speed Anti Shake may not operate properly resulting in blurred images if the
camera is moved more than the allowable range or if the subject moves during
shooting.
• When shooting with this BEST SHOT scene, the “ISO Sensitivity” setting is fixed at
“AUTO”.
Digitally Correcting for Overexposure and Underexposure
(HDR)
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “HDR” and then press [SET].
3. Press the shutter button to shoot.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
73
NOTE
• HDR works best when shooting with the camera mounted on a tripod.
• With this BEST SHOT scene, the flash setting automatically becomes
Off).
?
(Flash
• Anti shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions and image composition, this BEST SHOT scene
may not be able to produce the desired result.
Shooting Snapshots and Movies Digitally Processed for
Artistic Effect (HDR Art)
snapshots and movies into works of art that provide a greater degree of expression
than conventional imaging. You can also adjust the intensity of the art effect that is
applied.
Normal image
HDR Art image
To shoot a snapshot with HDR Art
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “HDR Art” and then press [SET].
3. Use [8] and [2] to select the fifth Control Panel option from the top
(Art Effect).
4. Use [4] and [6] to select the
Art Effect: 1
Art Effect: 2
Art Effect: 3
Weak
intensity of the art effect.
Normal
Strong
5. Press [SET].
6. Press the shutter button to shoot.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
74
NOTE
• HDR Art works best when shooting with the camera mounted on a tripod.
?
• With this BEST SHOT scene, the flash setting automatically becomes
Off).
(Flash
• Anti shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
• The desired HDR Art effect may not be attained if the camera or subject moves
during shooting.
• Depending on shooting conditions and image composition, this BEST SHOT scene
may not be able to produce the desired result.
To shoot a movie with HDR Art (HDR Art Movie)
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “HDR Art” and then press [SET].
3. Record the movie the same way as you would a normal movie
Press [0] (Movie) to start and stop recording.
IMPORTANT!
• Certain shooting conditions when shooting a movie with this function can cause the
image and audio to be out of sync.
• “Art Effect” settings are not reflected in movies.
NOTE
• With this BEST SHOT scene, the “» Quality” can be either “HD” or “STD” only
• When any “» Quality” setting other than “STD” is selected in another mode, the
“HD” setting is used when shooting with this BEST SHOT scene.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
75
Expanding the Zoom Range to Shoot Clearer Snapshots
(Multi SR Zoom)
This feature uses super resolution technology and multiple Continuous Shutter (CS)
images to expand the zoom range for overall images of higher quality and clarity.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “Multi SR Zoom” and then press [SET].
3. Press the shutter button to shoot.
NOTE
• Multi SR Zoom is effective when you want to capture delicate textures.
function.
?
• With this BEST SHOT scene, the flash setting automatically becomes
Off).
(Flash
• The desired Multi SR Zoom effect may not be attained if the camera or subject
moves during shooting.
• Depending on shooting conditions and image composition, this BEST SHOT scene
may not be able to produce the desired result.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
76
Shooting a Panorama Image (Slide Panorama)
With Slide Panorama, you move the camera to compose
and record multiple images, which are then combined to a
panorama. This feature lets you shoot a panorama of up to
360 degrees, which is dramatically greater than the physical
capabilities of the lens.
• The final panorama image can be one of the two sizes shown below.
x
Slide Direction is Right or Left: Maximum 11520 1080 pixels
x
Slide Direction is Up or Down: Maximum 1920 7296 pixels
• Zoom operations are not supported during Slide Panorama shooting. The zoom
setting is fixed at full wide angle.
• You can use Slide Panorama to shoot a horizontal image up to approximately 360
degrees and a vertical image up to approximately 180 degrees.
If you shoot a horizontal Slide Panorama image that is less than 360 degrees, the
image size will become 60, 120, 180, 240, or 300 degrees.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select the “Slide Panorama” scene.
3. Press [SET] and then use [8] and [2] to select the fifth Control Panel
option from the bottom (Slide Direction).
4. Use [4] and [6] to select the direction you are planning to move the
camera while shooting, and then press [SET].
You can select one of four directions: Right, Left, Up, or Down.
5. Point the camera at the start of the panorama and half-press the
shutter button to allow the camera to focus automatically.
6. Press the shutter button the rest of the way down
and a slide cursor will appear on the monitor
screen. Slowly move the camera in the direction
indicated by the arrow on the screen until the
slide cursor reaches the other end of its
movement range (i.e. all the way to the right
when moving the camera to the right).
• The camera will start composing the panorama image
internally when the slide cursor reached the other end
of the movement range.
Slide cursor
• Image composing also will start automatically if you stop moving the camera
during panorama shooting. After you stop moving the camera, the message
“Busy... Please wait...” appears as the camera processes the image. Wait until
this message disappears before using the camera. Image shooting is disabled
while the message is displayed.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
77
NOTE
• The following conditions are not compatible with Slide Panorama shooting.
– Subject whose brightness is very different from that of its surroundings due to
artificial light, sunlight, etc.
– Rivers, waves, waterfalls, or other subject with constantly changing patterns
– Sky, beach, or other subject with continuous patterns
– Camera too close to the main subject
– Moving subject
• Slide Panorama may stop part way through in the following cases.
– Subject or camera movement
– Camera movement that is too fast or too slow
• Shooting a Slide Panorama image after half-pressing the shutter button to perform
Auto Focus may not produce the desired results if there are considerable
differences in the brightness, color, and/or focus of the individual images. If this
happens, try changing the focus position by focusing on a different subject, etc.
• Since a Slide Panorama image is created by joining multiple images together, there
may be some roughness at the point where two images are joined.
• Shooting under a flickering light source (such as fluorescent lighting) may result in
uneven brightness and/or coloring in the final Slide Panorama image.
• Shooting in dark surroundings may result in a blurred image or may make Slide
Panorama shooting impossible.
• Slowly move the camera at a constant speed in the same direction as the arrow
that appears on the monitor screen.
• When moving the camera, try to keep the arrow on the monitor screen as straight
as possible.
• The exposure and white balance when shooting Slide Panorama images are fixed
at the levels measured when you half-press the shutter button at the beginning of
the operation.
• An error message will appear if the camera is unable to successfully record a
series of images.
• If you shoot a moving subject, the camera may not be able to compose the
panorama image properly.
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
78
Configuring the Camera to Help You Better Time Your Shots
(Lag Correction)
There always is some unavoidable time lag between the point you press the shutter
button and the point that the image is actually recorded. The “Lag Correction” feature
lets you configure the camera to lessen or even eliminate this lag to help you better
time your shots and get exactly the moment you want. With “Lag Correction”, you
half-press the shutter button and compose the image you want to shoot. Then when
you full-press the shutter button, the camera pre-records a total of 5 images, including
four images of action that happened before you fully pressed the shutter button. After
that, you can view the images on the monitor screen and select the one you want to
keep.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “Lag Correction” and then press [SET].
3. With the camera pointed at the subject, half-press and hold the shutter
button.
The camera will start pre-recording images at this time.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the pre-recorded images currently in the buffer will be deleted.
4. When you are ready to shoot, press the shutter button all the way
down.
After pre-recording is complete, one of the five images will appear on the monitor
screen for about three seconds.
5. If you want to view all five of the pre-recorded images, press [SET]
within about three seconds after a recorded image appears on the
monitor screen.
If you do not press [SET] within three seconds, the image displayed in step 4 will
be saved automatically as the final image.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
79
6. Use [4] and [6] to scroll through the pre-recorded images on the
monitor screen.
Use [4] and [6] to scroll through the pre-recorded images. Each image appears,
along with an indication of the timing when it was pre-recorded.
–0.4 sec.
–0.3 sec.
–0.2 sec.
–0.1 sec.
SHUTTER
(Full-press)
(0.4*)
(0.3*)
(0.2*)
(0.1*)
* Seconds prior to full-press of shutter button.
• The timing of the image you select here will be the timing of the image
displayed first in step 4 the next time you perform the above procedure. If you
select the image that was pre-recorded 0.3 seconds prior to full-press of the
shutter button, for example, the –0.3-second image will be displayed in step 4
the next time you perform the above procedure.
7. To save the currently displayed image as the final images, press [SET].
NOTE
?
• With this BEST SHOT scene, the flash setting automatically becomes
Off).
(Flash
• The Self-timer cannot be used with this BEST SHOT scene.
• With this BEST SHOT scene, half-pressing the shutter button fixes focus and
exposure at their current levels.
• With this BEST SHOT scene, image recording will not be successful if you full-
press the shutter button without allowing enough time (at least 0.4 seconds) after
half-pressing it.
• Pay close attention to the subject when shooting. Failure to do so can cause
considerable lag from the instant you want to shoot until you actually full-press the
shutter button. This can cause image recording to be too late, even if you use this
function.
Immediately after you full-press the shutter button, one of the five pre-recorded
images will appear on the display as in step 4 of the above procedure.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
80
Shooting with Priority on Subject Faces
(High Speed Best Selection)
With High Speed Best Selection, the camera automatically shoots a series of images,
and selects the best one based on facial image blur, and facial expression (whether
the subject is smiling or blinking).
1. In the REC mode, press [BS] (BEST SHOT).
2. Select “High Speed Best Selection” and then press [SET].
3. Press the shutter button to shoot.
• This will cause the message “Busy... Please wait...” to appear. Do not move
the camera while this message is displayed. The recording process takes
some time to complete after the message appears.
NOTE
• With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
• If one or more of the faces are blurred in all of the images that are shot, they will be
blurred in the final image as well.
• The following conditions may make it impossible for the camera to determine if the
subject is blinking or smiling. This may result in a final image in which the subject is
blinking or not smiling.
– Faces that are partially or completely darkened by shadows, etc.
– Hair that is hiding or near the eyes
– Eye glasses
– Small faces
– Faces that are not looking directly at the camera
• Shooting a large group of people will cause processing of the image after shooting
to take longer.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
81
Using the Situation-specific CS Scenes
The High Speed CS capabilities provide you with a variety of BEST SHOT options
(Child CS, Pet CS, Sports CS) to suite exactly the type of image you are trying to
record. Images continue to be shot as long as you keep the shutter button depressed,
with the shooting speed optimized according to the BEST SHOT scene you are using.
Then when you press the shutter button the rest of the way down, the camera stores
what is currently in the buffer and starts real-time continuous shutter shooting of new
images. Shooting continues until you release the shutter button or until a total of up to
30 images (buffer images plus new images) are shot. Some of the 30 images are of
action that occurred before you full-pressed the shutter button and some are after.
This helps to ensure you capture exactly the moment you want, even if your timing is
slightly off.
Shutter button half-press
Shutter button full-press
Shutter button release
Recorded images (up to 30 images)
Pre-recorded images
Continuous recording of images until
shutter button released*
* You can record up to 30 images (pre-recorded buffer images plus real-time images) for
each Prerecord CS operation.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select the BEST SHOT scene you want to use and then press [SET].
The following are the settings for each BEST SHOT scene.
Scene Name
Child CS
CS fps
10 fps
15 fps
30 fps
Maximum CS Shots Pre-recorded Shots
20 (2 seconds)
30 (2 seconds)
30 (1 second)
5 (0.5 seconds)
5 (0.3 seconds)
10 (0.3 seconds)
Pet CS
Sports CS
3. Half-press and hold the shutter button to start pre-recording of images.
A preset number of images are pre-recorded. The pre-recorded images are
continually updated until you full-press the shutter button.
• If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the pre-recorded images currently in the buffer will be deleted.
• The camera will not emit shutter sounds as it pre-records images.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
82
4. Press the shutter button the rest of the way down.
This will save the pre-recorded images and start shooting new images in real-
time. Images continue to be shot as long as you keep the shutter button
depressed.
5. Shooting will stop when you release the shutter button or after the
maximum number of shots is reached.
NOTE
• Control panel operations, recording, and precautions are the same as those that
apply to the BEST SHOT “High Speed CS” scene (page 50).
• Prerecord CS (pre-recording of images before the shutter button is full-pressed) is
not performed if you full-press the shutter button without half-pressing first.
Whenever possible, be sure to half-press the shutter button, compose the image,
and then full-press the shutter button.
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
83
Using the Situation-specific High Speed Movie Scenes
The High Speed Movie capabilities of the camera provide you with a variety of BEST
SHOT options (Child High Speed Movie, Pet High Speed Movie, Sports High Speed
Movie) to suite exactly the type of image you are trying to record.
1. In the REC mode, press [BS] (BEST SHOT).
2. Select the BEST SHOT scene you want to use and then press [SET].
Scene Name
Frame Rate
120 fps
Child High Speed Movie
Pet High Speed Movie
Sports High Speed Movie
240 fps
480 fps
3. Record the movie the same way as you would a normal movie (page
55).
Press [0] (Movie) to start and stop recording.
• During High Speed Movie recording, focus is fixed at the position where it was
when recording started. To focus an image, half-press the shutter button for
Auto Focus or focus manually before you press [0] (Movie) to start recording.
NOTE
• These BEST SHOT scenes always shoot using High Speed Movie. The current
“» Quality” setting is ignored.
• Precautions and the shooting procedure are the same as those for High Speed
– Prerecord Movie
– YouTube movie recording
Download from Www.Somanuals.com. All Manuals Search And DowUnsloinagdB.EST SHOT
84
Advanced Settings
The following are menu operations you can use to configure various camera settings.
Using On-screen Menus
. Example Menu Screen Operation
1. In the REC mode, press [MENU].
[8] [2] [4] [6]
This will display the menu screen.
• Menu contents are different in the REC
mode and PLAY mode.
2. Use [4] and [6] to select the tab where
the item you want to configure is located.
[MENU]
[SET]
3. Use [8] and [2] to select the menu item
you want, and then press [6].
Example:
When “Self-timer” is
4. Use [8] and [2] to change the setting.
selected on the “REC” tab
5. After the setting is the way you want,
press [SET].
Tabs
• Pressing [4] registers the selected setting
and returns to the menu.
• To configure settings on another tab after
pressing [4] to return to the menu, use [8]
to move the highlighting up to the tabs, and
then use [4] and [6] to select the tab you
want.
• Pressing [MENU] interrupts the menu
operation and exits the menu screen.
Items
IMPORTANT!
unavailable.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
85
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following
operation is the same as the one described under “Example Menu Screen Operation”
on page 85.
Use [4] and [6] to select the “REC” tab.
Procedure
[r] (REC) * [MENU] * REC Tab * Self-timer
Press
[r] (REC).
Press
[MENU].
Use [8] and [2] to select “Self-timer” and
then press [6].
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
86
REC Mode Settings (REC)
Zooming with Super Resolution (Zoom (SR))
Procedure
[r] (REC) * [MENU] * REC Tab * Zoom (SR)
Selecting a Focus Mode (Focus)
Procedure
[r] (REC) * [MENU] * REC Tab * Focus
Approximate Focus
Range*1
Focus Mode
Settings Type of Shot
Snapshot
Movies
Snapshot Movies
Approximately 2 cm to
9 (infinity) (0.8" to 9)
(Wide Angle)*2
Q Auto General
Automatic
Automatic
3
Focus
recording
*
Approximately 2 cm to 50 cm
(0.8" to 19.7")
(Wide Angle)*2
´
Macro
Automatic
Close ups
Automatic
3
*
Scenery and
other distant
subjects
)
Infinity
Fixed
Infinity (Wide Angle)
W
Manual
Focus
When you
want to focus
manually
Approximately 2 cm to
9 (infinity) (0.8" to 9)
(Wide Angle)*2
Manual
*1 The focus range is the distance from the lens surface.
*2 The focus range depends on the current optical zoom position.
*3 During High Speed Movie recording, focus is fixed at the position where it was when
recording started. To focus an image, half-press the shutter button for Auto Focus or
focus manually before you press [0] (Movie) to start recording.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
87
To focus with manual focus
1. On the monitor screen, compose the image so
the subject you want to focus on is within the
yellow boundary.
2. Watching the image on the monitor screen use
[4] and [6] to adjust focus.
• At this time the image that is within the boundary
will enlarge and fill the monitor screen, which aids
in focusing. If you do not perform any operation for
two seconds while the enlarged image is displayed,
the screen in step 1 will re-appear.
Yellow boundary
NOTE
• An Auto Macro feature detects how far the subject is from the lens and
automatically selects either Macro Focus or Auto Focus accordingly.
• Use of the flash together with Macro Focus can cause the light of the flash to
become blocked, which may result in unwanted lens shadows in your image.
• In the case of movie recording, Auto Macro operates before you start recording.
After recording is started, however, focus is fixed.
• Whenever you perform an optical zoom operation while shooting with Auto Focus,
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell
you the focus range, as shown below. Note that the focus range is displayed
including the Auto Macro range only when shooting with Auto Focus.
Example: oo cm to 9
* oo is the actual focusing range value.
• The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page
95) are disabled while Manual Focus is selected as the focus mode.
• Turning on “Face Detection” causes the focus mode to change automatically to Q
(Auto Focus). Changing the focus mode setting to anything other than Q (Auto
Focus) causes “Face Detection” to turn off automatically.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
88
Using Focus Lock
Subject to be focused on
“Focus lock” is a technique you can use when you want to
compose an image in which the subject you want to focus
on is not within the focus frame in the center of the
screen.
• To use focus lock, select “Í Spot” or “Ë Tracking”
for the Auto Focus area (page 92).
1. Align the monitor screen’s focus frame with
the subject you want to focus on and then half-
press the shutter button.
Focus frame
2. Keeping the shutter button half-pressed
(which maintains the focus setting), move the
camera to compose the image.
• When “Ë Tracking” is selected as the Auto Focus
area, the focus frame will move automatically and
follow the subject.
3. When you are ready to shoot the image, press the shutter button the
rest of the way down.
NOTE
• Focus lock also locks exposure (AE).
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
89
Using the Self-timer (Self-timer)
Procedure
[r] (REC) *[MENU] * REC Tab * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
„
10 sec 10-second Self-timer
2-second Self-timer
• When shooting under conditions that slow down the shutter speed,
you can use this setting to prevent image blur due to camera
movement.
‚
2 sec
Shoots three images: one image 10 seconds after the shutter button
is pressed, and the next two images as soon as the camera is ready
after shooting the previous image. How long it takes for the camera to
get ready to shoot depends on the image size and quality settings,
whether or not a memory card is loaded in the camera, and the flash
charge condition.
”
(Triple
Self-timer)
X3
Off
Self-timer is disabled.
• The front lamp flashes while the Self-timer countdown is in
Front lamp
progress.
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
NOTE
• The Self-timer cannot be used together with the following features.
High Speed CS with Prerecord CS, Prerecord (Movie), Lag Correction, Child CS,
Pet CS, Sports CS, Slide Panorama, Wide Shot
• The Triple Self-timer cannot be used together with the following features.
Movie, High Speed CS, Multi SR Zoom, Child High Speed Movie, Pet High Speed
Movie, Sports High Speed Movie, High Speed Best Selection, For YouTube,
Blurred Background
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
90
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Procedure
[r] (REC) * [MENU] * REC Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
A
On
Minimizes the effects of hand and subject movement.
Turns off Anti Shake settings.
Off
Half-pressing the shutter button demonstrates the effect of Anti
Shake. However, the image is not recorded.
F
DEMO
NOTE
• Only camera shake correction can be used during FHD and STD movie recording.
• Camera shake correction is not supported during High Speed Movie recording.
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen
when you half-press the shutter button while “A On” is selected. These values will
appear briefly, however, in the preview image that is displayed immediately after
you shoot a snapshot.
• Shooting while “A On” is selected can cause an image to appear somewhat
coarser than normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• Anti Shake may not work properly when the camera is mounted on a tripod. Turn
off Anti Shake.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
91
Specifying the Auto Focus Area (AF Area)
Procedure
[r] (REC) * [MENU] * REC Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
• When recording movies, the AF metering area is always “Í Spot”.
The camera automatically determines the focus point on the
Ò
Í
Intelligent screen and focuses there (intelligent AF).
This mode takes readings of a small area in the center of the
Spot
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
nine possible areas. The focus frame of the area where the
I
Multi
camera focuses will be displayed in green.
When you half-press the shutter button while this setting is
selected, the focus frame will follow the movement of the subject.
Ë
Tracking
“Ò Intelligent”
“Í Spot” or “Ë Tracking”
“I Multi”
Focus frame
Focus frame
Focus frame
• “Ë Tracking” cannot be used in combination with some BEST SHOT scenes.
• “I Multi” cannot be selected for the AF area while Face Detection is enabled.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Using the Auto Focus Assist Light (AF Assist Light)
Procedure
[r] (REC) * [MENU] * REC Tab * AF Assist Light
Half-pressing the shutter button while this setting is selected
causes the front lamp to light, which provides illumination for
focusing in areas where lighting is dim. Leaving this function
turned off is recommended when shooting portraits from short
distances, etc.
Front lamp
IMPORTANT!
• Never look directly into the front lamp while it is lit.
• Make sure your finger is not covering the front lamp.
Shooting with Face Detection (Face Detection)
Procedure
[r] (REC) * [MENU] * REC Tab * Face Detection
When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
1. Use [4] and [6] to select “On” and then press [SET].
2. Point the camera at the subject(s).
The camera will detect human faces and display a
frame around each one.
3. Half-press the shutter button.
The camera will focus and the frames around the
faces it focuses on will turn green.
4. Press the shutter button the rest of the way down.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
93
Tips for Best Face Detection Results
• The camera performs center focus if it cannot detect a face.
• Always make sure that Auto Focus (AF) is selected as the focus mode when
shooting with face detection.
• Detection of the following types of faces is not supported.
– A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is very dark
– A face of a pet or some other non-human subject
IMPORTANT!
• Face detection cannot be used in combination with any of the following features.
– Some BEST SHOT scenes
– Movie mode (Including some BEST SHOT scenes that support High Speed
Movie recording)
– High Speed CS with Prerecord CS (Including some BEST SHOT scenes that
support High Speed CS recording)
• The “Focus” setting is always fixed at Q (Auto Focus) whenever “Face Detection”
is being used. If you want to change the “Focus” setting, first select “Off” for “Face
Detection”.
Shooting with Continuous Auto Focus (Continuous AF)
Procedure
[r] (REC) * [MENU] * REC Tab * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the
screen.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
94
Turning Digital Zoom On or Off (Digital Zoom)
Procedure
[r] (REC) * [MENU] * REC Tab * Digital Zoom
• Digital zoom is disabled while shooting with the following feature.
– High speed movie recording
Reducing Wind Noise during Movie Recording
(Wind Noise Cut)
Procedure
[r] (REC) * [MENU] * REC Tab * Wind Noise Cut
Select “On” to reduce wind noise during movie recording. Note, however, that this will
also cause the sound quality to change.
Assigning Functions to the [4] and [6] Keys (L/R Key)
Procedure
[r] (REC) * [MENU] * REC Tab * L/R Key
You can assign one of the seven functions listed below to the [4] and [6] keys.
Setting
[4]/[6] key operation
• W (Manual Focus) cannot be selected.
Q*´*)
Metering
Self-timer
Face Detection
ISO
Changes the metering mode (page 99).
Sets the self-timer time (page 90).
Turns face detection on or off (page 93).
White Balance
EV Shift
Cancels [4] and [6] key assignments.
Off
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
95
Displaying the On-screen Grid (Grid)
Procedure
[r] (REC) * [MENU] * REC Tab * Grid
The on-screen grid can be displayed on the REC mode
monitor screen for easy vertical and horizontal alignment
when composing images.
Turning on Image Review (Review)
Procedure
[r] (REC) * [MENU] * REC Tab * Review
While Review is turned on, the camera will display a image for about one second
immediately after you press the shutter button to record it.
• Image review is available only when shooting single images. It does not work with
continuous shutter.
• When shooting with some functions while “On” is selected for “Review” will cause
the message “Busy... Please wait...” to appear after you press the shutter button.
Shooting another image is disabled while this message is displayed. Wait a while
until the process being performed is complete.
Using Icon Help (Icon Help)
Procedure
[r] (REC) * [MENU] * REC Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for
certain icons when you switch between REC functions.
Functions Supported by Icon Help
• Recording mode
• Available options for the “L/R Key” setting
• Exposure warning when shutter button is half-pressed
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
96
Configuring Power On Default Settings (Memory)
Procedure
[r] (REC) * [MENU] * REC Tab * Memory
This setting lets you specify which camera settings should be remembered by the
camera when it is turned off, and restored the next time the camera is turned on. To
have the camera remember a setting, you should enable the setting’s memory. Any
setting whose memory is disabled will be reset to its initial default any time the
camera is turned off.
Setting
Disabled (Initial Default Setting)
Enabled
BEST SHOT
Flash
HDR
Auto
Focus
Q(Auto Focus)
ISO
AUTO
White Balance
EV Shift
Auto WB
0.0
AF Area
Spot
Setting at
power off
Metering
Multi
Self-timer
Flash Intensity
Zoom (SR)
Digital Zoom
MF Position
Zoom Position*
Off
0
Single
On
Position before manual focus was selected.
Full wide
* Optical zoom setting only.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
97
Image Quality Settings (Quality)
Specifying Snapshot Image Quality (T Quality (Snapshot))
Procedure
[r] (REC) * [MENU] * Quality Tab * T Quality (Snapshot)
Fine
Gives image quality priority
Normal
Normal
• The “Fine” setting helps to bring out details when shooting dense tree branches or
leaves, a complex pattern, etc.
• Memory capacity (the number of images you can record) will be affected by the
quality settings you configure (page 188).
Movie Image Quality Settings (» Quality (Movie))
Procedure
[r] (REC) * [MENU] * Quality Tab * » Quality (Movie)
This setting can be used to configure movie image quality settings and to select either
normal movie recording or High Speed Movie recording.
aspect ratio of movies recorded with this setting is 16:9.
FHD
Select this setting record high-definition (HD) movies. The aspect ratio
of movies recorded with this setting is 16:9.
• “HD” appears in place of “FHD” when you are shooting with “HDR
HD
Art” (page 74).
Use this setting for standard movie recording. Recording with this
setting is performed using an aspect ratio of 4:3, an image size of
640 480 pixels, and a frame rate of 30 frames per second. Image
STD
x
quality and image size settings cannot be changed (page 55).
HS120
HS240
HS480
The image size of movies recorded with this mode depends on the
HS1000
HS30-120
HS30-240
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
98
Specifying the Metering Mode (Metering)
Procedure
[r] (REC) * [MENU] * Quality Tab * Metering
The metering mode determines what part of the subject is metered for exposure.
Multi-pattern metering divides the image into sections and measures
the light in each section for a balanced exposure reading. This type
of metering provides error-free exposure settings for a wide range of
shooting conditions.
B
Multi
Center weighted metering concentrates on the center of the focus
area to measure light. This type of metering is best when you want
some level of control over contrast.
N
Weighted
Center
Spot metering takes readings at a very small area. Use this metering
method when you want exposure to be set according to the
brightness of a particular subject, without being affected by
surrounding conditions.
˜
Spot
Optimizing Image Brightness (Lighting)
Procedure
[r] (REC) * [MENU] * Quality Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas
when shooting images.
Performs brightness correction. When this option is selected, it takes
longer for the image to be stored after the shutter button is pressed.
On
Off
Does not perform brightness correction.
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
99
Specifying Flash Intensity (Flash Intensity)
Procedure
[r] (REC) * [MENU] * Quality Tab * Flash Intensity
You can specify flash intensity to one of five levels from +2 (brightest flash) to –2
(least bright flash).
• Flash intensity may not change when the subject is too far away or too close.
Using Built-in Color Filters (Color Filter)
Procedure
[r] (REC) * [MENU] * Quality Tab * Color Filter
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Controlling Image Sharpness (Sharpness)
Procedure
[r] (REC) * [MENU] * Quality Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Controlling Color Saturation (Saturation)
Procedure
[r] (REC) * [MENU] * Quality Tab * Saturation
You can specify one of five saturation settings from +2 (most saturated) to –2 (least
saturated).
Adjusting Image Contrast (Contrast)
Procedure
[r] (REC) * [MENU] * Quality Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and
dark) to –2 (least contrast between light and dark).
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
100
Viewing Snapshots and Movies
Viewing Snapshots
Viewing a Movie
1. Press [p] (PLAY) and then use [4] and [6] to display the movie you
want to view.
2. Press [SET] to start playback.
Movie icon: »
Recording time
Image quality
Movie Playback Controls
[4] [6] (Playback in progress.)
Fast forward/fast
reverse
• Each press of either button increases the speed of the
fast forward or fast reverse operation.
• To return to normal playback speed, press [2].
Play/pause
[SET]
1 frame forward/
back
[4] [6] (Playback paused.)
• Holding down either button scrolls continuously.
Press [2] and then press [8] [2]
• Volume can be adjusted only while movie playback is in
progress.
Volume adjustment
Information display
on/off
[8] (DISP)
Change to normal
playback speed
during high speed
movie playback
[AUTO]
• Press [AUTO] again to return to the slow playback
speed. This operation is not supported when playing a
movie shot with “HS30-120” or “HS30-240”.
Slide the zoom controller in the direction of z ([).
• You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. You can zoom a movie
image up to 4.5 times normal size.
Zoom
Stop playback
[MENU]
• Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Viewing a Panorama Image
1. Press [p] (PLAY), and then use [4] and [6] to
display the panorama images you want to
view.
2. Press [SET] to start playback of the panorama.
Panorama playback causes the image to scroll left,
right, up, or down.
Playback Controls
To start or pause
[SET]
playback
[4] [6] (When the slide direction is left or right.)
[8] [2] (When the slide direction is up or down.)
• Holding down any button scrolls continuously.
To advance scroll
while paused
To hide or show
display information
[8] (DISP)
To stop playback
[MENU]
• The following functions cannot be performed on a panorama image.
Dynamic Photo, Movie Converter, MOTION PRINT, Movie Editing, Trimming,
Resize, Lighting, White Balance, Brightness, Rotation
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Viewing Continuous Shutter Images
Each time you perform a continuous shutter (CS) operation, the camera creates a CS
group that includes all of the images for that particular CS session. You can use the
following procedure to play back the images in a particular CS group.
1. Press [p] (PLAY) and then use [4] and [6] to display the CS group
whose images you want to view.
Number of image files in
the CS group
CS group icon
First image in the CS group
2. About one second after you select a CS group, high speed playback of
its images will start automatically.
• After playback of a CS Group is complete, the first image of the group will be
displayed on the monitor screen.
• Pressing [SET] will pause playback. While playback is paused, you can adjust
the playback speed, specify the playback direction, scroll forward or back,
zoom images, and delete images.
Current image number/number
of images in the group
CS speed
Playback guide
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
103
The following are operations that are supported after you press [SET] to
start image playback.
During playback, changes the playback direction and playback speed.
While playback is paused, scrolls forward or back.
• Playback speed cannot be adjusted while the displayed image is
[4] [6]
zoomed.
[SET]
Toggles between pause and play.
Zooms the image.
• You can use [8], [2], [4], and [6] to scroll the zoomed image on
the monitor screen.
• Sliding the zoom controller towards w (]) while an image is not
zoomed will display a menu of images in the current CS group.
Zoom
controller
[MENU]
Exits CS group playback.
[8] (DISP) Cycles through information display formats.
[2] Displays the “CS Frame Edit” menu.
Deleting Continuous Shutter Images
You can use the following procedures to delete images while playback is in progress
or paused.
. Deleting a Specific CS Group File
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Delete” and then press [SET].
3. Use [4] and [6] to display the image you want to delete.
4. Use [8] and [2] to select “Delete” and then press [SET].
• To delete other files, repeat steps 3 and 4.
• To exit the delete operation, press [MENU].
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
104
. Deleting Multiple Files in a CS Group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Delete” and then press [SET].
3. Use [8] and [2] to select “Delete Frames” and then press [SET].
• This displays a file selection screen.
4. Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
• This will select the check box of the currently selected file.
• You can enlarge the selected image before deleting it by sliding the zoom
controller towards z ([).
5. Repeat step 4 to select other files, if you want. After you are finished
selecting files, press [MENU].
6. Use [8] and [2] to select “Yes” and then press [SET].
• This deletes the files you selected.
• To cancel the delete operation, select “No” in step 6 and then press [SET].
. Deleting All Files in a CS Group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Delete” and then press [SET].
3. Use [8] and [2] to select “Del Group Images” and then press [SET].
4. Use [8] and [2] to select “Yes”, and then press [SET].
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Dividing Up a CS Group
Use the following to divide up a CS Group into individual images.
. Dividing Up a Specific CS Group
1. While a CS group is displayed or while the images of a CS group are
scrolling on the monitor screen, press [MENU].
2. Use [4] and [6] to select the “PLAY” tab.
3. Use [8] and [2] to select “Divide Group” and then press [6].
4. Use [4] and [6] to display the CS group you want to divide up.
5. Use [8] and [2] to select “Divide” and then press [SET].
• To divide up other CS group files, repeat steps 4 and 5.
. Dividing Up All CS Groups
IMPORTANT!
• Once a CS group is divided, it cannot be regrouped.
1. While a CS group is displayed or while the images of a CS group are
scrolling on the monitor screen, press [MENU].
2. Use [4] and [6] to select the “PLAY” tab.
3. Use [8] and [2] to select “Divide Group” and then press [6].
4. Use [8] and [2] to select “Divide All Groups” and then press [SET].
5. Use [8] and [2] to select “Yes”, and then press [SET].
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
106
Copying a CS Group Image
Use the following procedure to copy an image in a CS group to a location outside of
the group.
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Copy”, and then press [SET].
3. Use [4] and [6] to display the image you want to copy.
4. Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
• The functions below cannot be performed on snapshots inside a CS group. Before
using either of these functions, perform the above procedure to copy the image
first.
White Balance, Brightness, Trimming, Rotation, Resize
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Zooming an On-screen Image
1. In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2. Slide the zoom controller towards z ([) to
Zoom factor
zoom.
Image area
You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. Slide the zoom controller
towards w to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
– To exit the zoom screen, press [MENU].
– Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to
Current display area
the full 8X.
• Pressing [SET] will lock the current zoom factor for the on-screen image. You
can then use [4] and [6] to scroll between images, using the same zoom
factor. Pressing [SET] again will unlock the zoom factor and allow you to use
[8], [2], [4] and [6] to move around the currently displayed images. This
function cannot be used while viewing CS group images or movies. Also, CS
group images and movies will not appear when you are scrolling images with
[4] and [6].
Displaying the Image Menu
1. In the PLAY mode, slide the zoom controller
Boundary
towards w (]).
Use [8], [2], [4] and [6] to move the selection
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to
move the selection boundary to the image you want and
then press [SET].
• In the case of a movie or a continuous shutter (CS)
file, the first frame of the file will be displayed.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
108
Viewing Snapshots and Movies on a TV Screen
1. Use the optionally available AV cable (EMC-8A) to connect the camera
to the TV.
AV cable (EMC-8A)
Yellow
White
Red
Terminal cover
[USB/AV] port
Video
Audio
TV
AUDIO IN jack (red)
AUDIO IN jack (white)
VIDEO IN jack (yellow)
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the AV cable connector,
connect the cable to the camera.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• Make sure that the camera is turned off before plugging
in or unplugging the cable. Check the user
documentation that comes with the TV for information
about requirements before plugging into or unplugging
from the TV.
2. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
109
3. Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 162).
4. Now you can display images and play back movies as you normally do.
IMPORTANT!
• Before connecting to a TV to display images, be sure to configure the camera’s
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
NOTE
• Audio is stereo.
• Some TVs may not be able to output images and/or audio correctly.
• All icons and indicators that appear on the monitor screen also appear on the TV
screen. You can use [8] (DISP) to change the display contents.
• Normally connecting the camera to a TV during recording will cause the camera’s
monitor screen to go blank and display the image picked up by the camera on the
monitor screen but not the TV screen. Image recording can be performed in either
case.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Viewing High-quality Movies on a Hi-Vision Television
Use a commercially available HDMI cable to
connect the camera to the TV. For information
about playback, see the procedure starting
from step 2 under “Viewing Snapshots and
• Use a commercially available HDMI cable that is marked with the logo shown to the
right.
HDMI connector
HDMI input
HDMI cable (commercially available)
HDMI output (Mini)
HDMI mini connector
Terminal cover
IMPORTANT!
• Output to a TV is not supported while the camera is in the REC mode.
NOTE
• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini
connector on one end, and a plug that is compatible with your TV’s HDMI
connector on the other end.
• Proper image and/or audio output and other operations may not be possible with
some devices.
• Connecting the camera to the HDMI connector of another device can damage both
the camera and the other device. Never connect two HDMI output connectors to
each other.
• Make sure that the camera is turned off before plugging in or unplugging the cable.
Check the user documentation that comes with the TV for information about
requirements before plugging into or unplugging from the TV.
• When cables are connected to both the USB/AV port and the HDMI output
connector, the HDMI output connector connection is given priority.
• Disconnect the HDMI cable when you are not using HDMI output. The camera’s
monitor screen may not operate normally while the HDMI cable is connected.
• Audio is stereo.
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
111
. Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * Set Up Tab * HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
This setting will cause the format to change automatically in accordance
with the connected TV. Normally, you should use this mode.
Auto
1080i
480p
576p
1080i format output*
480p format output
576p format output
* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output
method may be 576p when outputting to a digital TV in a PAL reception area that does
not support 1080i 60i. If you are in a PAL reception area and nothing is displayed
automatically, change the setting to 576p.
• If an image does not appear when “Auto” is selected as the output method, try
changing this setting to something else.
IMPORTANT!
• The “HDMI Output” setting cannot be changed as long as there is an HDMI cable
connection between the camera and a TV. Disconnect the HDMI cable from the
camera to change the “HDMI Output” setting.
Recording Camera Images to a DVD Recorder or Video Deck
Use the following method to connect the camera to the recording device using the AV
cable (option).
– DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN
terminals.
– Camera: Connect the AV cable to the USB/AV port.
You can play a slideshow of snapshots and movies on the camera and record it on a
DVD or video tape. You can record movies by selecting “» Only” for the slideshow
“Images” setting (page 113).
For information about connecting a monitor to the recording device and about how to
record, see the user documentation that comes with the recording device you are
using.
Viewing Snapshots and Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Other Playback Functions (PLAY)
This section explains menu items that you can use to configure settings and perform
other playback operations.
Playing a Slideshow on the Camera (Slideshow)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Slideshow
Start
Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
Z
All images except
T
: All non-continuous shutter (CS) images
Only: Snapshots only
» Only: Movies only
Time
Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”.
If you specify a value from 1 to 30 seconds, movies play from beginning to end.
When the slideshow reaches a movie file while “MAX” is selected, only the first
frame of the movie will be displayed.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
113
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change effect.
• Patterns 2 through 4 have different background music, but they all use the
same image change effect.
• Pattern 5 can be used for playback of snapshots only (except for those that
are part of a CS group), and the “Interval” setting is ignored.
• The currently selected image change effect setting is disabled automatically
in following cases.
– When playing a slideshow for which “» Only” is selected for the “Images”
setting
– When the interval setting is “MAX”, 1 second, or 2 seconds
– Before and after playback of a movie
– During CS group playback (Except the Pattern 1 effect)
Off: No image change effect or background music
• To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the
slideshow and returns to the menu screen.
• Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
• All button operations are disabled while the slideshow is transitioning from one
image to another.
• The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
114
Transferring Music from Your Computer to Camera Memory
You can replace the built-in slideshow background music with other music from your
computer.
Supported File Types:
• PCM format (16-bit, monaural / stereo) WAV files
• Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz
Number of Files: 9
File names: SSBGM001.WAV to SSBGM009.WAV
• Create the music files on your computer using the above names.
• Regardless of which effect pattern you select, the music files you store in camera
memory are played back in name sequence.
If you plan to save the music files to the camera’s memory card, make sure the
card is loaded in the camera.
2. Perform one of the following operations to open the memory card or
built-in memory.
This will cause the camera to be recognized by your computer as a Removable
Disk (Drive).
• Windows
Windows 7 / Windows Vista: Start * Computer
Windows XP: Start * My Computer.
1
Double-click “Removable Disk”.
• Macintosh
2
Double-click the camera’s drive icon.
1
3. Create a folder named “SSBGM”.
4. Double-click the “SSBGM” folder you created and copy the
background music file to it.
• See the user documentation that comes with your computer for information
about moving, copying, and deleting files.
• If there are background music files both in built-in memory and on the memory
card loaded in the camera, the files on the memory card take priority.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
115
Creating a Snapshot of Movie Frames (MOTION PRINT)
Procedure
[p] (PLAY) * Movie Screen * [MENU] * PLAY Tab *
MOTION PRINT
1. Use [4] and [6] to scroll through the movie frames and display the one
you want to use as the image of the MOTION PRINT image.
Holding down [4] or [6] scrolls at high speed.
2. Use [8] and [2] to select “Create” and then press [SET].
• Only the frames of movies recorded on this camera can be used in a MOTION
PRINT image.
Editing a Movie on the Camera (Movie Editing)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] *
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
}
(To-Point Cut)
Cut
Cuts everything from the beginning of the movie up to the
current location.
~
Cut
(Point-To-Point Cut)
Cuts everything between two points.
¡
Cut
(From-Point Cut)
Cuts everything from the current location to the end of the
movie.
1. Use [8] and [2] to select the editing method you want to use and then
press [SET].
2. Use the following operations to select the frame
(point) from which or to which you want to cut
the movie (the cut point).
During playback, changes the playback
[4] [6] direction and playback speed. While
playback is paused, scrolls forward or back.
Cut range (yellow)
[SET]
Toggles between pause and play.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
116
3. Press [2] to display the editing menu and specify one or two cut
points.
}
Cut
(To-Point Cut)
While the frame you want the cut to be up to is
displayed, press [2].
While the frame you want the first (From) cut to be is
displayed, press [2].
1
~
Cut
(Point-To-Point Cut)
Select another frame.
While the frame you want the second (To) cut to be
is displayed, press [2].
2
3
¡
Cut
(From-Point Cut)
While the frame you want the cut to be from is
displayed, press [2].
4. Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
• You also can start a movie editing operation while the movie you want to edit is
playing back. When playback reaches a frame where you want a cut point to be,
press [SET] to pause playback. Next, press [2] to display the menu of editing
options. Perform editing using the same procedures as described above.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
117
Optimizing Image Brightness (Lighting)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas
in existing images.
+2
Performs a higher level of brightness correction than the “+1” setting.
Performs brightness correction.
+1
Cancel
Does not perform brightness correction.
NOTE
• Altering the lighting of an image causes the original image and the new (altered)
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Adjusting White Balance (White Balance)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
White Balance
You can use the white balance setting to select a light source type for a recorded
image, which will affect the colors of the image.
¤
'
“
Daylight
Overcast
Shade
Outdoors, fair weather
Outdoors, cloudy to rain, in tree shade, etc.
Very high temperature light, such as building shade, etc.
†
DayWhite
Fluorescent
White or day white fluorescent lighting, without suppressing
color cast
–
Daylight
Fluorescent
Daylight fluorescent lighting, while suppressing color cast
«
Tungsten
Suppressing of the appearance of light bulb lighting
No white balance adjustment
Cancel
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
118
NOTE
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Adjusting the Brightness of an Existing Snapshot
(Brightness)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
NOTE
• The original snapshot is retained in memory and not deleted.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Selecting Images for Printing (DPOF Printing)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
119
Protecting a File Against Deletion (Protect)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Protect
Protects specific files.
Use [4] and [6] to scroll through the files
until the one you want to protect is displayed.
1
Use [8] and [2] to select “On” and then
press [SET].
2
On
An image that is protected is indicated by the
› icon.
To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file, select
“Off” instead of “On” in step 2 above.
3
Protects all files.
Use [8] and [2] to select “All Files: On” and then press [SET].
Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in
step 1 above.
1
2
All Files:
On
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 164).
NOTE
• Performing the above procedure while a CS group is displayed will protect all the
images in the CS group. You can protect individual images in a CS group by
performing the above procedure while the image is displayed.
. To protect a specific image in a CS group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Protect” and then press [SET].
3. Use [4] and [6] to scroll through images until one you want to protect
is displayed.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
120
4. Use [8] and [2] to select “On” and then press [SET].
This will protect the image and display the › icon.
• To unprotect an image, select “Off” in step 4 and then press [SET].
5. After you are finished, select “Cancel” and then press [SET] to exit this
operation.
NOTE
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 164).
. To protect all the images in a CS group
1. While a CS group is displayed or while the images of a CS group are
scrolling on the monitor screen, press [MENU].
2. Use [4] and [6] to select the “PLAY” tab.
3. Use [8] and [2] to select “Protect” and then press [SET].
4. Use [4] and [6] to display the CS group you want to protect.
5. Use [8] and [2] to select “On” and then press [SET].
This will protect all the images in the group and display the › icon.
• To unprotect all of the images in the group, select “Off” in step 5 and then press
[SET].
6. Press [MENU].
NOTE
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 164).
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
121
Editing the Date and Time of an Image (Date/Time)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Date/Time
[8] [2]
Changes the setting at the cursor location.
Moves the cursor between settings.
[4] [6]
[0] (Movie)
Toggles between 12-hour and 24-hour format.
When the date and time settings are what you want, press [SET] to apply them.
NOTE
be edited.
• You cannot edit the date and time of an image that is protected.
• You can input any date from 1980 to 2049.
Rotating an Image (Rotation)
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] * PLAY Tab *
Rotation
1. Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2. When the displayed image is at the orientation you want, press
[MENU].
NOTE
• Rotating a CS image causes all of the images in the CS group to be rotated. You
cannot rotate individual component image in a CS group.
• Rotation of a panorama image is not supported.
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu
screen.
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
122
Resizing a Snapshot (Resize)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can resize an image to one of three sizes:
8M, 5M, VGA.
• Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
Cropping a Snapshot (Trimming)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming
You can crop a snapshot to trim parts you do not need, and
save the result in a separate file. The original snapshot is
also retained.
Zoom factor
Represents
snapshot area
Use the zoom controller to zoom the image to the size you
want, use [8], [2], [4], and [6] to display the portion of
the image you want to cut out, and then press [SET].
• The image produced by cropping a 3:2 or 16:9 image will
have an aspect ratio of 4:3.
• The recording date of the cropped image will be the
same as the recording date of the original snapshot.
Part of snapshot that is
currently displayed
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
123
Copying Files (Copy)
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] * PLAY Tab *
Copy
Files can be copied from the camera’s built-in memory to a memory card or from a
memory card to built-in memory.
Copies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It cannot be
used to copy a single file.
Built-in *
Card
Copies a single file on the memory card to camera built-in camera
memory. Files are copied to the folder in built-in memory whose
name has the largest serial number.
• You cannot copy a continuous shutter (CS) group image (page
Card *
Built-in
Use [4] and [6] to select the file you want to copy.
Use [8] and [2] to select “Copy” and then press [SET].
1
2
NOTE
• You can copy snapshots or movies you recorded with this camera.
Dividing Up a Continuous Shutter Group (Divide Group)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Divide Group
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
124
Combining CS Images into a Single Still Image
(CS Multi Print)
Procedure
[p] (PLAY) * Display CS group. * [MENU] * PLAY Tab *
CS Multi Print
1. Use [8] and [2] to select “Create”.
• You can use [4] and [6] to select a different CS group, if you want.
2. Press [SET].
x
This converts the CS group to a 16M (4608 3456) image with up to 30 CS
x
frames (5 vertical 6 horizontal).
• This camera may not be able to correctly convert a CS group image with
another camera.
• The recording date of the converted image will be the same as the recording
date of the original CS group.
• When converting a CS group whose images have been rotated by the
“Rotation” feature to a CS Multi Print image, the arrangement of the images in
the CS Multi Print will be different from that of normal (unrotated) CS images.
Editing a CS Image (CS Frame Edit)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * CS Frame Edit
See the following pages for details.
DPOF Printing: page 133
Copy: page 107
Delete: page 104
Other Playback Functions (PLAY)
Download from Www.Somanuals.com. All Manuals Search And Download.
125
Dynamic Photo
This camera comes with a number of subjects in built-in
memory (“built-in subjects”), which you can insert into
snapshots and movies to create Dynamic Photo images.
• The term “built-in subjects” refers to the moving figures
and characters that came pre-programmed in the
camera’s built-in memory.
™
Built-in Subject
Another Image
Dynamic Photo Image
Inserting a Built-in Subject into a Snapshot or Movie
(Dynamic Photo)
Use the following procedure to insert a built-in subject image into a snapshot (except
for a panorama image) or movie.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Dynamic Photo
1. Use [4] and [6] to select the background image you want and then
press [SET].
• Only an image that satisfies the following conditions can be used as a
background image.
– A snapshot or movie recorded with this camera
– A snapshot with an aspect ratio of 4:3
2. Use [4] and [6] to select the built-in subject that you want to insert
into the image and then press [SET].
Download from Www.Somanuals.com. All Manuals Search And DownloDaydn.amic Photo
126
3. If you are inserting a subject into a movie an
image will appear on the monitor screen
showing the approximate location of the
subject in the movie. Use [4] and [6] to shift
the location to the position you want. After you
are finished, press [SET].
Insert location
• If you insert a subject into a movie, the resulting movie will be a maximum of
20 seconds long. Everything before and after the insertion is cut off. If the
movie you are inserting into (original movie) is shorter than 20 seconds, the
resulting movie will be the same length as the original movie.
• If you are inserting a subject into a snapshot, skip directly to step 4.
4. Use the zoom controller to adjust the size of the subject and use [8],
[2], [4], and [6] to adjust its position.
5. When everything is the way you want, press [SET].
This inserts the subject into another image and creates a Dynamic Photo.
• Inserting an animated subject into a snapshot will save a Dynamic Photo that
consists of 20 still images of 2M size or smaller.
• Inserting a subject into a movie will save the Dynamic Photo as a movie file.
NOTE
• Performing a delete or format operation will not delete the built-in subjects.
Download from Www.Somanuals.com. All Manuals Search And DownloDaydn.amic Photo
127
To view a Dynamic Photo (Dynamic Photo File)
1. Press [p] (PLAY) and then use [4] and [6] to display the Dynamic
Photo you want to view.
2. If you want to see the subject in the Dynamic Photo movie, press [SET].
The Dynamic Photo is repeated as a continuous loop.
• Movement of the subject also will start automatically about two seconds after
you display a Dynamic Photo.
Converting a Dynamic Photo Still Image to a Movie
(Movie Converter)
A Dynamic Photo with a still image background and a moving subject is stored as a
series of 20 still images. You can use the following procedure to convert the 20
images that make up a Dynamic Photo to a movie.
Procedure
[p] (PLAY) * Dynamic Photo Screen * [MENU] * PLAY Tab *
Movie Converter
• The final movie format is H.264/AVC standard.
x
• The final movie image size is 640 480 pixels.
Download from Www.Somanuals.com. All Manuals Search And DownloDaydn.amic Photo
128
Printing
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print
images directly from a memory card. For details, see the user
documentation that comes with your printer.
Connecting Directly to a PictBridge Compatible
Printer
You can print on a printer that supports PictBridge (page
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
• You can specify which images you want to print, the number of copies, and date
Connecting Directly to a PictBridge Compatible Printer
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
. To set up the camera before connecting to a printer
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
129
. Connecting the Camera to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to
your printer’s USB port.
USB cable (included with camera)
[USB/AV] port
Large connector
USB
Small connector
USB port
Terminal cover
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown
in the illustration.
• When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
• Make sure that the camera is turned off before plugging in or
unplugging the cable. Check the user documentation that
comes with the printer for information about requirements
before plugging into or unplugging from the printer.
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
130
. To print
1. Turn on the printer and load paper.
2. Turn on the camera.
This will display the print menu screen.
3. Use [8] and [2] to select “Paper Size”, and then press [6].
4. Use [8] and [2] to select a paper size and then press [SET].
• The following are the available paper sizes.
x
x
x
x
3.5" 5", 5" 7", 4" 6", A4, 8.5" 11", By Printer
• Selecting “By Printer” prints using a paper size selected on the printer.
• See the documentation that comes with your printer for information about
paper settings.
5. Use [8] and [2] to specify the print option you want.
1 Image
: Prints one image. Select and then press [SET]. Next, use [4] and
[6] to select the image you want to print.
DPOF Printing: Prints multiple images. Select and then press [SET]. With this
option, images will be printed in accordance with DPOF settings
• To toggle date stamping on and off, press [0] (Movie). The date stamp will be
printed when “On” is indicated on the monitor screen.
6. Use [8] and [2] to select “Print” and then press [SET].
Printing will start and the message “Busy... Please wait...” will appear on the
monitor screen. The message will disappear after a short while, even though
printing is still being performed. Pressing any camera button will cause the
printing status to re-appear. The print menu screen will re-appear when printing is
complete.
• If you selected “1 Image”, you can repeat the procedure from step 5, if you
want.
7. After printing is complete, turn off the camera and disconnect the USB
cable from the printer and camera.
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
131
Using DPOF to Specify Images to be Printed and the Number
of Copies
. Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy,
and time stamp on/off information on the memory card with the images.
After configuring settings, you can use the memory card to print on a home
printer that supports DPOF or take the memory card to a professional print
service.
• Whether or not you will be able to use DPOF settings for printing depends on the
printer you are using.
• Some professional print services may not support DPOF.
. Configuring DPOF Settings Individually for Each Image
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * Select images
1. Use [4] and [6] to scroll through the files until the image you want to
print is displayed.
2. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
• Repeat steps 1 and 2 to configure settings for other images, if you want.
3. Press [SET].
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
132
. Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
DPOF Printing * All images
1. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• Note that the specified number of copies will be printed for all of the images in
any CS group included with the images.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
2. Press [SET].
NOTE
image in the group is displayed.
. To specify the number of copies for a specific image in a CS group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “DPOF Printing” and then press [SET].
3. Use [8] and [2] to select “Select images” and then press [SET].
4. Use [4] and [6] to scroll through images until one you want to print is
displayed.
5. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
• Repeat steps 4 and 5 to configure settings for other images, if you want.
6. Press [SET].
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
133
. To configure the same DPOF settings for all the images in a CS
group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “DPOF Printing” and then press [SET].
3. Use [8] and [2] to select “Frame all” and then press [SET].
4. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
5. Press [SET].
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
134
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “00” for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don’t, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
. Date Stamping
You can use one of the following three methods to include the recording date in the
printout of an image.
Configuring camera settings
Configure DPOF settings (page 132).
You can turn date stamping on and off each time you print. You can configure
settings so some images include the date stamp and some don’t.
Configure the Camera’s Timestamp setting (page 158).
• The camera’s Timestamp setting imprints the date into a snapshot when you
shoot it, so the date is always included when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that includes a date
stamped with the camera’s Timestamp function. Doing so can cause the two
stamps to be overprinted.
Configuring computer settings
You can use commercially available image management software to date
stamp images.
Professional print service
Request date stamping when ordering prints from a professional print service.
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
135
. Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association
(CIPA). You can connect the camera directly to a printer that supports
PictBridge, and perform image selection and printing using the
camera monitor screen and controls.
• PRINT Image Matching III
Using image editing software and printing on a printer that supports
PRINT Image Matching III makes it possible to use information about
shooting conditions that is recorded with the image, and produce
exactly the type of image you want. PRINT Image Matching and
PRINT Image Matching III are trademarks of Seiko Epson Corporation.
• Exif Print
Printing on a printer that supports Exif Print uses information about
shooting conditions recorded with the image to enhance printed
image quality. Contact your printer manufacturer for information
about models that support Exif Print, printer upgrades, etc.
Printing
Download from Www.Somanuals.com. All Manuals Search And Download.
136
Using the Camera with a Computer
Things you can do using a computer...
You can perform the operations described below while the camera is connected to a
computer.
Save images to a
computer and view
them there
Save images and view them manually
Transfer images
stored on your
computer to
In addition to images, you also can transfer
screen shot images from your computer to
camera memory
Play back and edit
movies
151). To play back movies, use software
that is compatible with your computer’s
operating environment.
• To edit movies, use commercially
available software as required.
Play back and edit
Dynamic Photo
images on your
EXILIM, a
computer, or on a
mobile phone
• You can copy moving subjects
(animated characters) from your
computer to the EXILIM.
• You can convert Dynamic Photo images
to movies and send them to a mobile
phone for playback (Requires Dynamic
* Windows only
The procedures you need to perform when using the camera with your computer and
when using the software are different for Windows and the Macintosh.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
137
Using the Camera with a Windows Computer
Install the required software in accordance with the version of Windows you are
running and what you want to do.
When you want to
do this:
Operating System
Version
See
page:
Install this software:
Save images to a
computer and view
Windows 7,
Windows Vista,
Installation not required.
them there manually Windows XP
Installation not required.
• Windows Media Player 12,
which is already installed
on most computers, can
be used for playback.
Windows 7
Play movies
Movies can be played back
using QuickTime 7.
• You need to download
QuickTime 7 on the Web if
you want to use it.
Windows Vista,
Windows XP
Windows 7,
–
Edit movies
Windows Vista,
Windows XP
• Use commercial software
as required.
–
YouTube Uploader for
CASIO*
• You need to download it
from the website.
Windows 7,
Windows Vista,
Windows XP (SP3)
Upload movie files to
YouTube
Windows 7,
Windows Vista,
Windows XP
Photo Transport 1.0*
• You need to download it
from the website.
Transfer images to
the camera
Play back, copy, and
edit Dynamic Photo
moving subjects
(animated
Windows 7,
Dynamic Photo Manager*
Windows Vista (SP1), • You need to download it
Windows XP (SP3) from the website.
characters)
* YouTube Uploader for CASIO, Photo Transport, and Dynamic Photo Manager will not
run under 64-bit versions of Windows OS.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
138
. Computer System Requirements for Software
Computer system requirements are different for each of the applications. Information
about computer system requirements can be found under “Computer System
. Precautions for Windows Users
• The software requires Administrator privileges to run.
• Operation on a self-made computer is not supported.
• Operation may not be possible under certain computer environments.
Viewing and Storing Images on a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
. To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
139
4. Turn off the camera and then use the USB cable that comes with the
camera to connect it to your computer.
USB port
USB cable (included with camera)
Large connector
[USB/AV] port
Small connector
Terminal
cover
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
• The camera may not turn on automatically in the case of certain computer
models or connection conditions. If this happens, press [ON/OFF] (Power) to
turn on the camera.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera
if you connect via a USB hub. Always connect directly to
the computer’s USB port.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
5. Windows 7 / Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
6. Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
7. Right-click the “DCIM” folder.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
140
8. On the shortcut menu that appears, click “Copy”.
9. Windows 7 / Windows Vista users: Click “Start” and then
“Documents”.
Windows XP users: Click “Start” and then “My Documents”
• If you already have a “DCIM” folder in “Documents” (Windows 7 / Windows
Vista) or “My Documents” (Windows XP), the next step will overwrite it. If you
want to keep the existing “DCIM” folder, you need to change its name or move
it to a different location before performing the next step.
10. Windows 7 users: On the “Documents” “Organize” menu, select
“Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select
“Paste”.
Windows XP users: On the “My Documents” “Edit” menu, select
“Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” (Windows 7 / Windows Vista) or “My Documents” (Windows XP)
folder. You now have a copy of the files that are in camera memory on your
computer.
11. After you finish copying images, disconnect the camera from the
computer.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
141
. To view images you copied to your computer
1. Double-click the copied “DCIM” folder to open it.
2. Double-click the folder that contains the images you want to view.
3. Double-click the image file you want to view.
• An image that was rotated on the camera will be displayed on your computer
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually display the component
images in the CS group. A CS group cannot be viewed as a CS image on a
computer.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
142
Playing Movies
To play back a movie, first copy it to your computer and then double-click the movie
file. Some operating systems may not be able to play back movies. If this happens,
you need to install separately available software.
• With Windows 7, playback is supported by Windows Media Player 12.
• If you are unable to play back movies, go to the URL below to download
QuickTime 7 and install it on your computer.
http://www.apple.com/quicktime/
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Windows 7, Windows Vista, Windows XP (SP3)
CPU
: Image Quality “FHD”:
Core 2 Duo 3.0GHz or higher
Image Quality “STD” or “HS”:
Pentium 4 3.2GHz or higher
Required Software: QuickTime 7 (Not required with Windows 7.)
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use the AV cable
(option) to connect to the video input terminal of a TV or computer and play back
movies that way.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
143
Uploading Movie Files to YouTube
To make it easy to upload to YouTube a movie file recorded with the “For YouTube”
BEST SHOT scene, install YouTube Uploader for CASIO on your computer.
. What is YouTube?
YouTube is a movie sharing site managed by YouTube, LLC where you can upload
movies and view movies uploaded by others.
. To install YouTube Uploader for CASIO
Download the YouTube Uploader for CASIO installer from the CASIO digital camera
support page (http://www.casio-intl.com/support/). Double-click the installer and
follow the installation instructions that appear on your computer screen.
• For information about installation conditions and minimum computer system
requirements, see page 176.
. To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube
website (http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including neighboring copyrights)
unless you yourself own the copyright or you have obtained the permission of the
applicable copyright holder(s).
• The maximum file size for each upload is 2048MB or 15 minutes of playing time.
1. Record the movie you want to upload using the “For YouTube” scene
2. If it isn’t already, connect your computer to the Internet.
4. Turn on the camera.
YouTube Uploader for CASIO will start up automatically.
• If this is the first time you are using the application, configure the YouTube user
ID and network environment settings, and then click the [OK] button.
5. The left side of the display will have an area for inputting a title,
category, and other information required for uploading to YouTube.
Enter the required information.
6. The right side of the display shows a list of movie files in camera
memory. Select the check box next to the movie file you want to
upload.
7. When everything is ready, click the [Upload] button.
This will upload the movie file(s) to YouTube.
• After uploading is complete, click the [Exit] button to exit the application.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
144
Transferring Images from Your Computer to Camera Memory
If you want to transfer images from your computer to the camera, install Photo
Transport on your computer.
. To install Photo Transport
Download the Photo Transport installer from the CASIO digital camera support page
(http://www.casio-intl.com/support/). Double-click the installer and follow the
installation instructions that appear on your computer screen.
• For information about installation conditions and minimum computer system
requirements, see page 176.
. To transfer images to the camera
2. On your computer, click the following: Start * All Programs *
CASIO * Photo Transport.
This starts up Photo Transport.
3. Drag the file(s) you want to transfer to the [Transfer] button.
4. Follow the instructions that appear on the display to complete the
transfer.
• The details of the instructions that appear on the display and the transferred
images will depend on your Photo Transport setup. For details, click the
[Settings] button or [Help] button and check the setup.
Transfer Data
• Only image files with the following extensions can be transferred to the camera:
jpg, jpeg, jpe, bmp (bmp images are converted to jpeg images automatically when
transferred.)
• Certain types of images may not be able to be transferred.
• You cannot transfer movies to the camera.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
145
. To transfer computer screen captures to the camera
2. On your computer, click the following: Start * All Programs *
CASIO * Photo Transport.
This starts up Photo Transport.
3. Display the screen whose screen capture you want to transfer.
4. Click the [Capture] button.
5. Draw a boundary around the area you want to capture.
Move your mouse pointer to the upper left corner of the area you want to capture
and then hold down the mouse button. Keeping the mouse button depressed,
drag the pointer down to the lower right corner of the area and then release the
mouse button.
6. Follow the instructions that appear on the display.
This will send an image of the area you selected to the camera.
• The transfer operation converts screen captures to JPEG format.
• The instructions that appear on the display and details about the transferred
images will depend on your Photo Transport setup. For details, click the
[Settings] button or [Help] button and check the setup.
. About settings and help
Click the [Settings] button when you want to change the Photo Transport setup. For
help about operation procedures and troubleshooting, click the Photo Transport
[Help] button.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
146
Play back Dynamic Photo images on your EXILIM, a computer,
or on a mobile phone
You can copy moving subjects (animated characters) from your computer to the
EXILIM. You also can convert Dynamic Photo images to movies and send them to a
mobile phone for playback. To perform such functions, you need to install Dynamic
Photo Manager on your computer.
To download Dynamic Photo Manager and find out more details about it, visit the
URL below.
http://www.exilim.com/dp/en_intl/
User Registration
Internet registration only is supported. Visit the following CASIO website to register:
http://world.casio.com/qv/register/
Using the Camera with a Macintosh
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
When you want to
do this:
Operating
System Version
See
page:
Install this software:
Save images to your
Macintosh and view
them there manually
OS X
OS X
Installation not required.
Save images to your
Macintosh
automatically/
Manage images
Use iPhoto, which comes
bundled with some Macintosh
products.
Movie file playback is supported
under OS X 10.4.11 or higher
when QuickTime 7 or higher is
installed.
Play movies
OS X
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
147
Connecting the Camera to Your Computer and Saving Files
IMPORTANT!
• The camera does not support operation with Mac OS X 10.0. Operation is
supported with Mac OS 10.1, 10.2, 10.3, 10.4, 10.5, and 10.6 (using the OS
standard USB driver) only.
. To connect the camera to your computer and save files
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “Mass Storage”, and then press [SET].
4. Turn off the camera and then use the USB cable that comes with the
camera to connect it to your Macintosh.
USB port
USB cable (included with camera)
Large connector
[USB/AV] port
Small connector
Terminal
cover
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
• The camera may not turn on automatically in the case of certain computer
models or connection conditions. If this happens, press [ON/OFF] (Power) to
turn on the camera.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
148
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera
if you connect via a USB hub. Always connect directly to
the computer’s USB port.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
5. Double-click the camera’s drive icon.
The camera’s back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera’s built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
6. Drag the “DCIM” folder to the folder to which you want to copy it.
7. After the copy operation is complete, drag the drive icon to Trash.
8. Disconnect the camera from the computer.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
149
. To view copied images
1. Double-click the camera’s drive icon.
2. Double-click the “DCIM” folder to open it.
3. Double-click the folder that contains the images you want to view.
4. Double-click the image file you want to view.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
• Viewing a CS image on a computer will individually display the component
images in the CS group. A CS group cannot be viewed as a CS image on a
computer.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
150
Transferring Images Automatically and Managing Them on
Your Macintosh
If you are running Mac OS X, you can manage snapshots using iPhoto, which comes
bundled with some Macintosh products.
Playing a Movie
You can use QuickTime, which comes bundled with your operating system, to play
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh
and then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Image Quality “FHD”:
Mac OS X 10.4.11 or higher
Image Quality “STD” or “HS”:
Mac OS X 10.3.9 or higher
Required Software: QuickTime 7 or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
– Change the movie image quality setting to “STD”.
– Upgrade to the latest version of QuickTime.
– Shut down other applications that are running.
Even if proper playback is not possible on your Macintosh, you can use the AV cable
(option) to connect to the video input terminal of a TV or Macintosh and play back
movies that way.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
151
User Registration
Internet registration only is supported. Visit the following CASIO website to register:
http://world.casio.com/qv/register/
Files and Folders
The camera creates a file each time you shoot a snapshot, record a movie, or
perform any other operation that stores data. Files are grouped by storing them in
folders. Each file and folder has its own unique name.
Name and Maximum Number Allowed
Example
File
Each folder can contain up to 9999 files named 26th file name:
CIMG0001 through CIMG9999. The extension
CIMG0026.JPG
on the file name depends on the file type.
Serial number Extension
(4 digits)
Folders
Folders are named from 100CASIO to
100th folder name:
999CASIO.
100CASIO
There can be up to 900 folders in memory.
• BEST SHOT has a scene named “For
YouTube” that optimizes movie settings for
recording movies for upload to YouTube.
Images recorded with the YouTube scene are
stored in a folder named “100YOUTB”.
Serial number (3 digits)
• You can view folder and file names on your computer. For details about how file
• The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
152
*
Memory Card Data
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
. About DCF
The following operations are supported for DCF-compliant images. Note, however,
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view
them.
. Memory Folder Structure
DCIM Folder
Recording Folder
Image File
DCIM
1
100CASIO
CIMG0001.JPG
CIMG0002.MOV
Movie File
1
*
101CASIO
102CASIO
Recording Folder
Recording Folder
1
*
MISC
AUTPRINT.MRK
DPOF File Folder
DPOF File
2
*
SCENE
Snapshot BEST SHOT User Setup Folder
SSBGM
SSBGM001.WAV
SSBGM002.WAV
Background Music Folder
Background Music File
Background Music File
2
*
STARTING.JPG
Startup Image File
*1 The BEST SHOT “For YouTube” scene sets up the camera for recording movies that
are optimized for uploading to YouTube. Images recorded with the “For YouTube”
scene are stored in a folder named “100YOUTB”.
*2 This folder or file can be created in built-in memory only.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
153
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM folders it to
change their names to dates or something similar after you copy them to your
computer. If you later decided to return a DCIM folder to the camera, however, be
sure to change its name back to DCIM. The camera is designed to recognize only a
root file with the name DCIM. Note the camera also will not be able to recognize the
folders inside the DCIM folder unless they have the names they originally had
when you copied them from the camera to your computer.
• You also can use a PC card adapter or a memory card reader/writer to access
camera files directly from the camera’s memory card.
Using the Camera with a Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
154
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
Adjusting Monitor Screen Brightness (Screen)
Procedure
[MENU] * Set Up Tab * Screen
With this setting, the camera detects available light levels and
Auto
automatically adjusts the brightness of the monitor screen accordingly.
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+2
+1
0
Bright setting for outdoor use, etc. Brightness that is greater than 0.
Normal monitor screen brightness for indoor use, etc.
Low monitor screen brightness for nighttime use, indoor use under dark
conditions, etc.
–1
Auto Image Orientation Detection and Rotation (Auto Rotate)
Procedure
[MENU] * Set Up Tab * Auto Rotate
Automatically rotates snapshots shot with the camera held vertically 90
degrees.
On
Off
Images not rotated automatically.
The camera automatically detects whether a snapshot image was shot in portrait or
landscape orientation and displays it accordingly. Auto rotation is not performed for
movies.
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
155
Configuring Camera Sound Settings (Sounds)
Procedure
[MENU] * Set Up Tab * Sounds
Startup
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Half Shutter
Shutter
Operation
Specifies the sound volume. This setting is also used as the
Operation
Play
=
=
Specifies the volume of movie audio output. This volume
setting is not used during video output (from the USB/AV port)
• Setting a volume level of 0 mutes output.
Specifying the File Name Serial Number Generation Rule
(File No.)
Procedure
[MENU] * Set Up Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial
Tells the camera to remember the last used file number. A new file will
be named using the next sequential number, even if files are deleted or
if a blank memory card is loaded. If a memory card is loaded and that
Continue card already has files stored on it and the largest sequential number in
the existing file names is greater than the largest sequential number
remembered by the camera, numbering of new files will start from the
largest sequential number in the memory card file names plus 1.
Restarts the serial number from 0001 whenever all files are deleted or
when the memory card is replaced with a blank one. If a memory card
Reset
is loaded and that card already has files stored on it, numbering of new
files will start from the largest sequential number in the memory card
file names plus 1.
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
156
Creating an Image Storage Folder (Create Folder)
Procedure
[MENU] * Set Up Tab * Create Folder
stored in the new folder starting from when you record your
next image.
Create Folder
Cancel
Cancels folder creation.
• Images recorded with the BEST SHOT “For eBay” or “Auction” scene, and the “For
YouTube” scene are stored in special folders. They are not stored in the folder you
create here.
• Deleting all of the files in a folder cause the folder to be deleted as well.
Configuring World Time Settings (World Time)
Procedure
[MENU] * Set Up Tab * World Time
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1. Use [8] and [2] to select “World” and then press [6].
• To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2. Use [8] and [2] to select “City” and then press [6].
• To change the “World” setting to summer time, use [8] and [2] to select
“DST” and then select “On”. Summer time is used in some geographical areas
to advance the current time setting by one hour during the summer months.
3. Use [8], [2], [4], and [6] to select the geographic area you want and
then press [SET].
4. Use [8] and [2] to select the city you want and then press [SET].
5. Press [SET].
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
157
Time Stamping Snapshots (Timestamp)
Procedure
[MENU] * Set Up Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2012, 1:25 p.m.
Date
2012/7/10
Date&Time
Off
2012/7/10 1:25pm
No stamping of date and/or time
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using the DPOF function or some printing application (page 135).
and the display style settings (page 159).
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
158
Setting the Camera’s Clock (Adjust)
Procedure
[MENU] * Set Up Tab * Adjust
[8] [2]
[4] [6]
Change the setting at the cursor location
Move the cursor between settings
[0] (Movie) Toggles between 12-hour and 24-hour format
When the date and time settings are what you want, select “Apply” and then press
[SET] to apply them.
• You can specify a date from 2001 to 2049.
you set the time and date while the wrong city is selected for your Home City, the
Specifying the Date Style (Date Style)
Procedure
[MENU] * Set Up Tab * Date Style
You can select from among three different styles for the date.
Example: July 10, 2012
YY/MM/DD
DD/MM/YY
MM/DD/YY
12/7/10
10/7/12
7/10/12
YY/MM/DD or MM/DD/YY: MM/DD
DD/MM/YY: DD/MM
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
159
Specifying the Display Language (Language)
Procedure
[MENU] * Set Up Tab * Language
. Specify the display language you want.
Select the tab on the right.
Select “Language”.
Select the language you want.
• Camera models sold in certain geographic areas
may not support display language selection.
1
1
2
3
23
Configuring Sleep State Settings (Sleep)
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while “Off” is
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During a slideshow
– During movie recording and playback
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
160
Configuring Auto Power Off Settings (Auto Power Off)
Procedure
[MENU] * Set Up Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 2 min, 5 min, 10 min (The trigger time is always 5 minutes in
the PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During CS group playback
– During movie recording and playback
Configuring [r] and [p] Settings (REC/PLAY)
Procedure
[MENU] * Set Up Tab * REC/PLAY
Camera turns on whenever [r] (REC) or [p] (PLAY) is
pressed.
Power On
Camera turns on or off whenever [r] (REC) or [p] (PLAY) is
pressed.
Power On/Off
Camera does not turn on or off when [r] (REC) or [p] (PLAY)
is pressed.
Disable
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC
mode or [p] (PLAY) in the PLAY mode.
• Change this setting to “Power On” or “Power On/Off” before connecting to a TV for
image viewing.
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
161
Configuring USB Protocol Settings (USB)
Procedure
[MENU] * Set Up Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Select this setting when connecting to a computer (pages 139,
148). With this setting, the computer sees the camera as an
external storage device. Use this setting for normal transfer of
Mass Storage
images from the camera to a computer.
PTP
(PictBridge)
Select this setting when connecting to a printer that supports
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
Procedure
[MENU] * Set Up Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC Video system used in Japan, the U.S., and other countries
PAL
Video system used in Europe and other areas
4:3
Normal TV screen aspect ratio
Wide screen aspect ratio
16:9
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
162
Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] * Set Up Tab * HDMI Output
Configuring a Startup Image (Startup)
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p]
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the
special startup image provided in the camera’s built-in memory.
• You can select the first snapshot of a CS group as the startup image. If you want to
select another image within a CS group, you need to first divide up the CS group or
use the CS Frame Edit feature to make a copy of the image outside of the CS
group.
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
163
Formatting Built-in Memory or a Memory Card (Format)
Procedure
[MENU] * Set Up Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
– BEST SHOT user setups
– Startup screen
• Formatting a memory card will delete the following data.
– Protected images
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress. Doing so can cause
the camera to stop operating normally.
Resetting the Camera to Factory Defaults (Reset)
Procedure
[MENU] * Set Up Tab * Reset
The settings below are not reset.
World Time settings, clock settings, date style, screen language, video output
Download from Www.Somanuals.com. All Manuals Search And DOotwhenr lSoeattdin.gs (Set Up)
164
Appendix
Precautions during Use
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an automobile
or other vehicle, or while walking. Looking at the monitor while in motion creates
the risk of serious accident.
. Directly Viewing the Sun or Bright Light
• Never look at the sun or any other bright light through the cameras viewfinder.
Doing so can damage your eyesight.
. Flash
• Never use the flash unit in areas where flammable or explosive gas may be
present. Such conditions create the risk of fire and explosion.
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so
can interfere with the driver’s vision and creates the risk of accident.
• Never fire the flash too close to the eyes of the subject. Doing so creates the risk of
loss of eyesight.
. Monitor Screen
• Should the monitor screen ever become cracked, never touch any of the liquid
inside the monitor screen. Doing so creates the risk of skin inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse your
mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin, immediately
rinse with clean water for at least 15 minutes and contact your physician.
. Connections
• Never plug any devices that are not specified for use with this camera into
connectors. Connecting a non-specified device creates the risk of fire and electric
shock.
. Transport
• Never operate the camera inside of an aircraft or anywhere else where operation of
such devices is restricted. Improper use creates the risk of serious accident.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
165
. Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor, or while it
is overheating creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to protect yourself against burn
injury.
3. Contact your dealer or nearest CASIO authorized service center.
. Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside the camera
creates the risk of fire and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present. Particular care is required when
using the camera where it is raining or snowing, near the ocean or other body of
water, or in a bathroom.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other rough
treatment creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and creates the risk
of fire and electric shock.
. Disassembly and Modification
• Never try to take the camera apart or modify it in any way. Doing so creates the risk
of electric shock, burn injury, and other personal injury. Be sure to leave all internal
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized
service center.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
166
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so creates
the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed
vehicle parked in the sun, or other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can
cause the camera to fall, creating the risk of personal injury.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by transferring it
to a computer or other storage device. Note that data can be deleted in the case of
camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure as
described in the documentation that comes with the camera. Incorrectly replacing
the battery can result in corruption or loss of data in camera memory.
. Rechargeable Battery
• Use only the USB-AC adaptor (AD-C53U) or the specified device to charge the
battery. Attempting to charge the battery by an unauthorized means creates the
risk of battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing so can
damage the battery, and cause deterioration of its performance and loss of service
life.
• The battery is intended for use with a CASIO Digital Camera only. Use with any
other device creates the risk of the battery damage, or deterioration of battery
performance and service life.
• Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.).
– Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never
place the battery into a microwave oven, heater, high-pressure generating
device, etc.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
167
• Should you ever notice leakage, strange odor, heat generation, discoloration,
deformation, or any other abnormal condition while using, charging, or storing a
battery, immediately remove it from the camera and keep it away from open flame.
• Do not use or leave the battery under direct sunlight, in an automobile parked in the
sun, or in any other area subject to high temperatures. Doing so can damage the
battery, and cause deterioration of its performance and loss of service life.
• If battery charging does not end normally within the specified charging time, stop
charging anyway and contact your local CASIO authorized service center.
Continued charging creates the risk of battery overheating, fire, and explosion.
• Battery fluid can damage your eyes. Should battery fluid get into your eyes
accidentally, immediately rinse them with clean tap water and then consult a
physician.
• Be sure to read the user documentation that comes with the camera and special
USB-AC adaptor before using or charging the battery.
• If a battery is to be used by young children, make sure that a responsible adult
makes them aware of the precautions and proper handling instructions, and make
sure that they handle the battery correctly.
• Should fluid from a battery accidentally get onto clothing or your skin, immediately
rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin
irritation.
. Battery Life
• Battery continuous operation times provided in this manual represent the
approximate amount of time before the camera turns off due to low battery power
when being powered by the special battery under normal temperature (23°C
(73°F)). They do not guarantee that you will be able to achieve the indicated level
of operation. Actual battery life is greatly affected by ambient temperature, battery
storage conditions, the amount of time spent in storage, etc.
• Leaving the camera on can run down the battery and cause the low battery
warning to appear. Turn off the camera whenever you are not using it.
• The low battery warning indicates that the camera is about to turn off due to low
battery power. Charge the battery as soon as possible. Leaving a low or dead
battery in the camera can lead to battery leakage and data corruption.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
168
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
– Removing the battery or memory card while the camera is performing some
operation
– Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
– Disconnecting the USB cable while communication is in progress
– Using a battery that is low
– Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
. Operating Environment
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
– Near an air conditioner or in other areas subjected to extreme temperature or
humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
169
. Caring for your camera
• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and
other foreign matter on the lens or flash window can interfere with proper operation
of the camera. Use a blower or other means to keep the lens and flash window free
of dirt and dust, and wipe gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Old Rechargeable Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
. USB-AC adaptor Handling Precautions
-
0 Never plug the power cord into an outlet whose voltage rating is different from
that marked on the power cord. Doing so creates the risk of fire, malfunction,
and electric shock.
0 Take care to protect the power cord against damage and breaking. Never place
heavy objects onto the power cord, or expose it to intense heat. Doing so can
damage the power cord, creating the risk of fire and electric shock.
0 Never try to modify the power cord, or subject it to severe bending, twisting, or
pulling. Doing so creates the risk of fire, malfunction, and electric shock.
0 Never plug in or unplug the power cord while your hands are wet. Doing so
creates the risk of electric shock.
0 Do not plug the power cord into an outlet or extension cord that is shared by
other devices. Doing so creates the risk of fire, malfunction, and electric shock.
0 Should the power cord ever become damaged (to the point that internal wires
are exposed or cut), immediately contact your original retailer or a CASIO
authorized service center to request repair. Continued use of a damaged power
cord creates the risk of fire, malfunction, and electric shock.
• The USB-AC adaptor becomes slightly warm during charging. This is normal and
does not indicate malfunction.
• Unplug the power cord from the power outlet when you are not using the USB-AC
adaptor.
• Never use detergent to clean the power cord (especially the plug).
• Never cover the USB-AC adaptor with a blanket, etc. Doing so creates the risk of
fire.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
170
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
. Copyrights
Except for your own personal enjoyment, unauthorized use of use of snapshots or
movies of images whose rights belong to others, without the permission of the right
holder, is forbidden by copyright laws. In some cases, shooting of public
performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your
own personal enjoyment. Regardless of whether such files are purchased by you or
obtained for free, posting them on a website, a file sharing site, or any other Internet
site, or otherwise distributing them to third parties without the permission of the
copyright holder is strictly prohibited by copyright laws and international treaties. For
example, uploading or distributing on the Internet images of TV programs, live
concerts, music videos, etc. that were photographed or recorded by you may infringe
upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held
liable for use of this product in any way that infringes on the copyrights of others or
that violates copyright laws.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
Note that trademark ™ and registered trademark ® are not used within the text of this
manual.
• SDXC Logo is a trademark of SD-3C, LLC.
• Microsoft, Windows, Internet Explorer, Windows Media, Windows Vista,
Windows 7, and DirectX are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
• Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc.
• YouTube and the YouTube logo are trademarks or registered trademarks of
Google Inc.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
• EXILIM, Photo Transport, Dynamic Photo, Dynamic Photo Manager, and YouTube
Uploader for CASIO are registered trademarks or trademarks of CASIO
COMPUTER CO., LTD.
• All other company or product names mentioned herein may be registered
trademarks or trademarks of their respective companies.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
171
Any and all unauthorized copying, distribution, and transfer for commercial purposes
of the software provided by CASIO for this product are prohibited.
This product’s YouTube upload functionality is included under license from YouTube,
LLC. The presence of YouTube upload functionality in this product is not an
endorsement or recommendation of the product by YouTube, LLC.
Power Supply
Charging
. If the camera’s back lamp starts flashing red...
If the back lamp starts flashing red during charging, it means that further charging is
not possible for one of the reasons below. Perform the actions described below to
correct the problem and then try charging again.
Ambient temperature or the temperature of the battery is abnormally high
or low
Unplug the USB cable from the camera and wait for a while until the camera is within
the temperature range of 5°C to 35°C (41°F to 95°F), and then try charging again.
Safety timer activated
A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take longer than normal. If charging
takes longer than about six hours, a safety timer will terminate it automatically, even if
the battery is not fully charged. If the battery has not been used for a very long time,
charging may terminate automatically after only about 45 minutes.
1) Using a battery that has not been used for a long time.
Disconnect and then reconnect the USB cable to resume charging.
2) Insufficient power supply when connected to computer
Connect directly to a USB port what supplies a current of 500mA.
For details about the power supply capacity of a computer’s USB port, contact the
manufacturer of the computer. Though disconnecting and then reconnecting the USB
cable will resume charging, you may need to do so repeatedly if the power supply
capacity of the computer is low.
If problems continue to occur after you perform the above steps, it could mean that
the battery is faulty. Contact your nearest CASIO authorized service center.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
172
To replace the battery
1. Open the battery cover and
remove the current battery.
Stopper
With the monitor screen side of the
camera facing upwards, slide the
stopper in the direction indicated by
the arrow in the illustration. After the
battery pops out, pull it the rest of the
way out of the camera.
2. Load a new battery.
Battery Precautions
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 5°C to
35°C (41°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
• Do not tear or remove the battery outer label.
• If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
. Storage Precautions
• Storing the battery for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a battery for some time, fully use
up its charge before storing it.
• Always remove the battery from the camera when you are not using it. A battery left
in the camera can discharge and go dead, which will require some time to charge
when you need to use the camera.
• Store batteries in a cool, dry place (20°C (68°F) or lower).
• To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
173
Using the Camera in another Country
. Precautions during Use
• The bundled USB-AC adaptor is designed for operation with any power supply in
the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the
power cord plug depends on each country or geographic area. Before taking the
camera and USB-AC adaptor along on a trip, check with travel agent about the
power supply requirements in your destination(s).
• Do not connect the USB-AC adaptor to a power supply through a voltage converter
or similar device. Doing so can lead to malfunction.
. Extra Batteries
• Taking along extra fully charged batteries (NP-110) is recommended while on a trip
in order to avoid not being able to shoot images due to the battery going dead.
Using a Memory Card
memory card.
To replace the memory card
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly.
Pull the card out the rest of the way and then insert
another one.
• Never remove a card from the camera while the
back lamp is flashing green. Doing so can cause
the image save operation to fail and even
damage the memory card.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
174
. Using a Memory Card
• SD memory cards, SDHC memory cards, and SDXC
memory cards have a write protect switch. Use the
switch when you need to guard against accidentally
deleting data. Note, however, if you write protect an
SD memory card you must then turn write protection
off whenever you want to record to it, format it, or
delete any of its images.
Write enabled
Write disabled
• If a memory card starts to behave abnormally during
image playback, you can restore normal operation by reformatting it (page 164).
However, it is recommended that you always take along multiple memory cards
whenever using the camera far away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.)
. Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
before discarding or transferring ownership of the camera.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
175
Computer System Requirements for Software (For Windows)
Computer system requirements are different for each of the applications. Be sure to
check the requirements for the particular application you are trying to use. Note that
the values provided here are minimum requirements for running each application.
Actual requirements are greater, depending on the number of images and the sizes of
the images being handled.
0Windows
YouTube Uploader for CASIO
Operating System: Windows 7, Windows Vista, Windows XP (SP3)
Other
: Sufficient memory to run the operating system
Computer configuration that enables playback of movies on the
YouTube site
Computer configuration that enables upload of movies to the
YouTube site
Photo Transport 1.0
Operating System
Memory
: Windows 7, Windows Vista, Windows XP
: At least 64MB
Hard Disk Drive Space: At least 2MB
Dynamic Photo Manager
Operating System
Memory
: Windows 7, Windows Vista (SP1), Windows XP (SP3)
: At least 512MB
Hard Disk Drive Space: At least 10MB
Internet Browser
: Internet Explorer 6.0 or greater or equivalent function
browser
Other
: QuickTime 7.6 or higher and Windows Media Player 10 or
higher installed.
Computer with continuous Internet connection (1Mbps or
greater)
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
176
Reset Initial Default Settings
The tables in this section show the initial default settings that are configured for menu
items (displayed when you press [MENU]) after you reset the camera (page 164).
Menu items depend on whether the camera is in the REC mode or PLAY mode.
• A dash (–) indicates an item whose setting is not reset or an item for which there is
no reset setting.
IMPORTANT!
unavailable.
. REC Mode
“REC” Tab
Zoom (SR)
Focus
Single
Review
Off
On
Q (Auto Focus)
Icon Help
Self-timer
Off
BEST SHOT: Off /
Flash: On /
Focus: Off /
ISO: Off /
White Balance: Off /
EV Shift: Off /
Anti Shake
AF Area
On
Í Spot
On
AF Assist Light
Face Detection
Continuous AF
Digital Zoom
Off
AF Area: On /
Memory
Metering: Off /
Self-timer: Off /
Flash Intensity: Off /
Zoom (SR): On /
Digital Zoom: On /
MF Position: Off /
Zoom Position: Off
Off
On
Wind Noise Cut Off
L/R Key
Grid
Off
Off
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
177
“Quality” Tab
T
Quality
(Snapshots)
Flash Intensity
Color Filter
Sharpness
Saturation
Contrast
0
Normal
FHD
Off
0
»
Quality
(Movies)
Metering
Lighting
0
B Multi
0
On
“Set Up” Tab
Screen
Auto
Adjust
–
–
–
Auto Rotate
On
Date Style
Language
Sleep
Startup: Sound 1 /
Half Shutter:
Sound 1 /
1 min
Auto Power Off 5 min
Shutter: Sound 1 /
Operation:
Sound 1 /
Sounds
REC/PLAY
USB
Power On
Mass Storage
=Operation:
...////
=Play: ...////
/
Video Out
HDMI Output
Startup
–
Auto
Off
–
File No.
Continue
Create Folder
World Time
Timestamp
–
Format
–
Reset
–
Off
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
178
. PLAY Mode
“PLAY” Tab
Images: All images /
Time: 30 min /
Interval: 3 sec /
Effect: Pattern 1
DPOF Printing
Protect
–
–
–
–
–
–
–
–
–
–
Slideshow
Date/Time
Rotation
Dynamic Photo
–
–
Resize
Movie
Converter
Trimming
Copy
MOTION PRINT Create
Movie Editing
Lighting
–
–
–
–
Divide Group
CS Multi Print
CS Frame Edit
White Balance
Brightness
“Set Up” Tab
• The contents of the “Set Up” tab are the same in the REC mode and PLAY mode.
Using the On-screen Histogram to Check Exposure
(+Histogram)
Displays a histogram on the monitor screen which you can use to
check the exposure of an image before you shoot it. You also can
display the histogram in the PLAY mode for information about the
exposure levels of images.
Histogram
NOTE
• A centered histogram does not necessarily guarantee optimum exposure. The
recorded image may be over-exposed or under-exposed, even though its
histogram is centered.
• Due to the limitations of exposure compensation, you may not be able to achieve
an optimum histogram configuration.
• Use of the flash and certain shooting conditions can cause the histogram to
indicate exposure that is different from the actual exposure of the image when it is
shot.
• The histogram cannot be displayed during high speed movie recording.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
179
How to Use the Histogram
A histogram is a graph that represents the lightness of an image in terms of the
number of pixels. The vertical axis indicates the number of pixels, while the horizontal
axis indicates lightness. If the histogram appears too lopsided for some reason, you
can use EV shift to move it left or right in order to achieve better balance. Optimum
exposure can be achieved by EV shifting so the graph is as close to the center as
possible. For snapshots, you can even display individual histograms for R (red),
G (green), and B (blue).
Example Histograms
A histogram towards the left side results when the
overall image is dark. A histogram that is too far to
the left may result in “black out” of the dark areas
of an image.
A histogram towards the right side results when
the overall image is light. A histogram that is too
far to the right may result in “white out” of the light
areas of an image.
An overall well-balanced histogram results when
the overall image is at optimal lightness.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
180
When things don’t go right...
Troubleshooting
Problem
Possible Cause and Recommended Action
Power Supply
Power does not
turn on.
battery goes dead soon after being charged, it means the
battery has reached the end of its life and needs to be
replaced. Purchase a separately available CASIO NP-110
rechargeable lithium ion battery.
The camera
suddenly powers
down.
back on.
3)The camera’s protection function may have activated
because camera temperature is too high. Turn off the camera
and wait until it cools down before trying to use it again.
Power will not turn Remove the battery from the camera and then reload them.
off. Nothing
happens when a
button is pressed.
Image Recording
r
] (REC) to enter
Image is not
1)If the camera is in the PLAY mode, press [
the REC mode.
recorded when the
shutter button is
pressed.
2)If the flash is charging, wait until the charge operation
finishes.
3)If the message “Memory Full” appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
Auto Focus does
1)If the lens is dirty, clean it off.
not focus properly. 2)The subject may not be in the center of the focus frame when
you compose the image.
3)The subject you are shooting may not be a type that is
4)You may be moving the camera when shooting. Try shooting
with Anti Shake or use a tripod.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
181
Problem
Possible Cause and Recommended Action
The subject is out
of focus in the
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
recorded image.
?
The flash does not 1)If
(Flash Off) is selected as the flash mode, change to
fire.
?
3)If a BEST SHOT scene that uses
(Flash Off) is selected,
The red ? (Flash The flash unit may be malfunctioning. Contact a CASIO
Off) icon is
displayed on the
authorized service center or your original retailer. Note that
though the flash will not fire, you still can use the camera for
monitor screen and non-flash shots.
the flash does not
fire.
Camera powers
down during Self-
timer countdown.
The battery may be low. Charge the battery.
The monitor screen 1)You may be using Manual Focus and have not focused the
image is out of
focus.
´
2)You may be using
(Macro) for scenery or portraits. Use
)
3)You may be trying to use Auto Focus or
shooting a close-up shot. Use the
(Infinity) when
´
(Macro) for close ups
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
?
2)You may be attempting to shoot in a dark location with
(Flash Off) selected, which can increase digital noise and
make images appear coarse. In this case, turn on flash (page
44) or use lights for illumination.
cause an increase in digital noise. Use a light or some other
means to illuminate the subject.
4)Shooting movies for long periods in areas where temperature
is relatively high can cause digital noise (dots of light) to
appear in the movie image. If this happens, move to a cooler
environment or turn off the camera and allow it to cool down,
which should cause normal operation to resume.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
182
Problem
Possible Cause and Recommended Action
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows
, charge the
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Though available
lighting is bright,
Not enough light is reaching the subjects. Change the flash
<
mode setting to
(Flash On) for daylight synchro flash (page
in the image are
dark.
Night shots come
out bad.
at night.
• High Speed Night Scene (for shooting night scenery only)
• High Speed Night Scene and Portrait (for shooting people
against night scenery)
Subjects are too
Sunlight reflected by water, sand, or snow, can cause
<
dark when shooting underexposure of images. Change the flash mode setting to
images in a
seashore or ski
area.
Digital zoom will
not go up to the
maximum value.
1)The digital zoom setting may be turned off. Turn on digital
2)Zoom will not go up to the maximum value if the “Zoom (SR)”
3)Zoom will not go up to the maximum value if the snapshot
The image is out of 1)Focusing may not be possible because the subject is outside
focus during movie
recording.
the focus range. Shoot within the allowable range.
3)During High Speed Movie recording, focus is fixed at the
position where it was when recording started. To focus an
image, half-press the shutter button for Auto Focus or focus
manually before you press [0] (Movie) to start recording.
Movie recording
suddenly stops.
The camera’s protection function may have activated because
camera temperature is too high. Wait until the camera
temperature drops to normal levels.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
183
Problem
Playback
Possible Cause and Recommended Action
The color of the
playback image is
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
different from what sunlight does not shine directly into the lens.
appears on the
monitor screen
when shooting.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
edited (with White
Balance,
Note that you cannot edit the following types of snapshots.
• Snapshots created using MOTION PRINT
• CS group snapshots
Brightness, Resize, • Movies
Trimming,
Rotation).
• Panorama Image
• Snapshots recorded with another camera
File Deletion
A file cannot be
deleted.
Other
The wrong date
and time are
The date and time setting is off. Set the correct date and time
displayed, or the
wrong date and
time are being
stored along with
image data.
The messages on
the display are in
the wrong
The wrong display language is selected. Change the display
language.
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely. Check all
connections.
2)The wrong USB communication protocol is selected. Select
the correct USB communication protocol in accordance with
3)If the camera is not turned on, turn it on.
4)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer’s USB port.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
184
Problem
Possible Cause and Recommended Action
Languageselection 1)You did not configure initial settings after purchasing the
screen appears
when the camera is
turned on.
camera or the camera may have been left with a dead
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
The time and date Load the camera’s battery and reconfigure the time and date
the first time after
purchasing the
for at least 24 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
camera are reset to battery.
their factory
• If the time and date are reset to their factory default settings
defaults when I
remove the
camera’s battery.
when you remove the battery after it has been loaded for
more than 24 hours, it could mean that the camera’s setting
memory is defective. Contact your retailer or a CASIO
authorized service center.
Buttons are not
responsive right
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
after the power has responsive.
been turned on.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
185
Display Messages
The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
ALERT
Battery is low.
Battery power is low.
The image you specified with the slideshow “Images”
Cannot find the file. setting cannot be found. Change the “Images” setting (page
113) and try again.
You are attempting to save a user BEST SHOT scene in
the “SCENE” folder when the folder already contains 999
user scenes.
Cannot register any
more files.
1)There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
IMPORTANT!
Card ERROR
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a
computer or some other storage device.
2)Are you trying to use an Eye-Fi card? This camera does not
support use of an Eye-Fi card.
You are attempting to connect the camera to a printer while
Check connections! the camera’s USB settings are not compatible with the USB
File could not be
saved because
battery is low.
Battery power is low, so an image file could not be saved.
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 33).
Folder cannot be
created.
This message appears and the camera turns off whenever
the lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
LENS ERROR
The Anti Shake unit of the camera may be malfunctioning.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
LENS ERROR 2
Load paper!
The printer ran out of paper while printing.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
186
Memory is full with images you recorded and/or files saved
by editing operations. When shooting with Prerecord CS,
this message indicates that there is not enough memory
capacity to record all of the pre-recorded images. Delete
files you no longer need (page 33).
Memory Full
An error occurred while printing.
• The printer is turned off.
Printing Error
• The printer generated an error, etc.
Image compression could not be performed for some
reason during image data recording. Perform a zoom
operation to change the composition of the image and
shoot it again.
Record Error
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
SYSTEM ERROR
The LOCK switch of the SD, SDHC, or SDXC
memory card loaded in the camera is in the
locked position. You cannot store images to
or delete images from a memory card that is
locked.
LOCK
The card is locked.
There are no files.
There are no files in built-in memory or on the memory
card.
There are no
printing images.
Set up DPOF.
There are currently no files specified for printing. Configure
the required DPOF settings (page 132).
There is no image to The setup you are trying to save is for an image that cannot
register.
be saved as a user BEST SHOT scene.
This card is not
formatted.
The memory card loaded in the camera is not formatted.
Format the memory card (page 164).
This file cannot be
played.
The file you are trying to access is corrupted or is a type
that cannot be displayed by this camera.
This message will appear part way through an operation
when you attempt to use a function that is not allowed in
combination with another function.
This function cannot
be used.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
187
Number of Snapshots/Movie Recording Time
Snapshot
Built-in Memory
Approximate
Memory Card
(16GB*2)Snapshot
Recording
Image Size
(Pixels)
(Approx. 52.2MB*1
Snapshot
)
Image Quality
Image File
Size
Recording Capacity
Capacity
16M
(4608 3456)
Fine
Normal
Fine
10.71 MB
5.57 MB
9.43 MB
4.92 MB
7.83 MB
4.1 MB
3
5
1072
1654
1214
1873
1466
2221
1787
2728
2990
4283
4669
6533
19683
26809
x
3:2
4
x
(4608 3072)
Normal
Fine
6
16:9
(4608 2592)
5
x
Normal
Fine
7
10M
(3648 2736)
6.4 MB
6
x
Normal
Fine
3.38 MB
2.99 MB
1.72 MB
2.0 MB
9
5M
10
14
15
22
67
91
x
(2560 1920)
Normal
Fine
3M
x
(2048 1536)
Normal
Fine
1.25 MB
430 KB
290 KB
VGA
(640 480)
x
Normal
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
188
Movies
Built-in Memory
(Approx.
Image
Quality
(Pixels) /
(Audio)
Memory Card
(16GB*2) Movie
Recording
File Size
of
1-minute
Movie
Maximum
File Size
Approximate Data
Rate (Frame Rate)
52.2MB*1) Movie
Recording
Capacity
Capacity
FHD
(1920 1080)
(Stereo)
14.2 Megabits/second
(30 frames/second)
35 minutes
59 seconds
x
27 seconds
35 seconds
106.5 MB
81.8 MB
HD
(1280 720)
(Stereo)
10.9 Megabits/second
(15 frames/second)
46 minutes
54 seconds
x
4
*
STD
(640 480)
(Stereo)
2 hours
12 minutes
54 seconds
3.9 Megabits/second
(30 frames/second)
1 minute
41 seconds
x
29.3 MB
HS1000
(224 64)
(No audio)
40.0 Megabits/second
(1000 frames/second)
13 minutes
10 seconds
x
10 seconds
9 seconds
9 seconds
9 seconds
300.0 MB
300.0 MB
300.0 MB
300.0 MB
HS480
40.0 Megabits/second
(480 frames/second)
13 minutes
2 seconds
x
(224 160)
(No audio)
Maximum
Movie Size:
29 minutes
HS240
40.0 Megabits/second
(240 frames/second)
12 minutes
58 seconds
x
(512 384)
(No audio)
HS120
40.0 Megabits/second
(120 frames/second)
12 minutes
55 seconds
x
(640 480)
(No audio)
HS30-240
(512 384)
(Audio
recording at
30 fps only)
5.4 Megabits/second
(30 frames/second)
40.4 Megabits/second
(240 frames/second)
x
1 hour
1 minute
36 minutes
40.5 MB*3
78.0 MB*3
13 seconds*3
54 seconds*3
HS30-120
(640 480)
(Audio
recording at
30 fps only)
10.4 Megabits/second
(30 frames/second)
40.4 Megabits/second
(120 frames/second)
x
49 minutes
38 seconds*3
57 seconds*3
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
189
Built-in Memory
Memory Card
(Maximum
Image Quality
Maximum File Approximate Data Rate (Approx. 52.2MB*1
)
(Pixels) / (Audio)
Size
(Frame Rate)
Movie Recording
Capacity
recording time
per recording)
YouTube (HS1000)
(224 64)
(No audio)
40.0 Megabits/second
(1000 frames/second)
x
10 seconds
9 seconds
9 seconds
9 seconds
27 seconds
56 seconds
YouTube (HS480)
(224 160)
(No audio)
40.0 Megabits/second
(480 frames/second)
x
YouTube (HS240)
40.0 Megabits/second
(240 frames/second)
1 minute
52 seconds
x
(512 384)
(No audio)
YouTube (HS120)
40.0 Megabits/second
(120 frames/second)
3 minutes
45 seconds
x
(640 480)
(No audio)
Maximum
Movie Size:
2048 MB (or
15 minutes)
YouTube (HS30-240)
5.4 Megabits/second
(30 frames/second)
40.4 Megabits/second
(240 frames/second)
x
(512 384)
1 minute
13 seconds*3
15 minutes*3
15 minutes*3
(Audio recording at
30 fps only)
YouTube (HS30-120)
10.4 Megabits/second
(30 frames/second)
40.4 Megabits/second
(120 frames/second)
x
(640 480)
38 seconds*3
27 seconds
(Audio recording at
30 fps only)
YouTube (FHD)
14.2 Megabits/second
(30 frames/second)
x
(1920 1080)
15 minutes
15 minutes
(Stereo)
YouTube (STD)
3.9 Megabits/second
(30 frames/second)
1 minute
41 seconds
x
(640 480)
(Stereo)
*1 Built-in memory capacity after formatting
*2 Based on a 16GB SDHC memory card (SanDisk Corporation). The number of images
you can save depends on the type of memory card you are using.
*3 Recordable time when the entire movie is recorded at 30 fps. Recording time is shorter
if the 30 fps frame rate is switched to 120 fps or 240 fps during recording.
• Snapshot and movie recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 16GB.
• The time it takes to play back a high speed movie will be different from the time it takes to
record it. If you record a 240 fps high speed movie for 10 seconds, for example, it will
take 80 seconds to play it back.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
190
Specifications
File Format
Snapshots:
JPEG (Exif Version 2.3; DCF 2.0 standard; DPOF compliant)
Movies:
MOV format, H.264/AVC standard, IMA-ADPCM (stereo)
Recording Media
Built-in Memory (Image Storage Area: 52.2MB*)
SD/SDHC/SDXC
* Built-in memory capacity after formatting
Recorded Image Sizes Snapshots:
x
x
x
16M (4608 3456), 3:2 (4608 3072), 16:9 (4608 2592),
10M (3648 2736), 5M (2560 1920), 3M (2048 1536),
VGA (640 480)
x
x
x
x
Movies:
x
x
FHD (1920 1080 30 fps), HD (1280 720 15 fps) (When
shooting movie with HDR Art only.), STD (640 480 30 fps),
HS1000 (224 64 1000 fps), HS480 (224 160 480 fps),
HS240 (512 384 240 fps), HS120 (640 480 120 fps),
HS30-240 (512 384 30-240 fps switchable),
HS30-120 (640 480 30-120 fps switchable)
x
x
x
x
x
x
x
Image Deletion
1 file; selected files; all files
1 CS group; 1 image in CS group; selected images in CS group
(with memory protection feature)
Effective Pixels
Imaging Element
16.10 Megapixels
Size: 1/2.3-inch square pixel high-speed CMOS
Total Pixels: 16.79 Megapixels
Lens/Focal Distance
(Snapshot)
F3.0 (W) to 5.9 (T) f = 5.0 to 35.0 mm
(equivalent to 28 to 196 mm in 35 mm format)
8 lenses in 7 groups, including aspherical lens.
Zoom
7X Optical zoom, 10.5X in combination with Single SR Zoom,
14X in combination with Multi SR Zoom
4X Digital zoom
Up to 111.6X when HD Zoom and Digital zoom are used in
combination (VGA size)
Focusing
Contrast Detection Auto Focus
• Focus Modes:
Auto Focus, Macro Focus, Infinity, Manual Focus
• AF Area:
Intelligent, Spot, Multi, Tracking; with AF assist light
9
9
) (Wide Angle)
Approximate Focus
Range (Snapshot)
(From Lens Surface)
Auto Focus: 2 cm to
(0.8" to
Macro Focus: 2 cm to 50 cm (0.8" to 19.7") (Wide Angle)
9
Infinity:
Manual Focus: 2 cm to
* Range is affected by optical zoom.
(Wide Angle)
9
9
) (Wide Angle)
(0.8" to
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
191
Metering
Multi-pattern, center weighted, and spot by imaging element
Program AE
Exposure Control
Exposure
–2.0 EV to +2.0 EV (in 1/3EV steps)
Compensation
Shutter
CMOS electronic shutter, mechanical shutter
Shutter Speed
Snapshot (Auto): 1 to 1/2000 second
Snapshot (Premium Auto): 4 to 1/2000 second
* May differ due to the camera setup.
Aperture Value
White Balance
F3.0 (W) to F8.8 (W) (ND filter)
* Using optical zoom changes the aperture value.
Auto, Daylight, Overcast, Shade, Day White Fluorescent,
Daylight Fluorescent, Tungsten, Manual WB
Sensitivity
Snapshots:
(Standard Output
Sensitivity)
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600, ISO 3200 equivalent
Movies: Auto
Self-timer
Approximate Trigger Times:
10 seconds, 2 seconds, Triple Self-timer
Flash Modes
Flash Range
Auto, Off, On, Red-eye reduction
0.4 m to 5.2 m (1.3' to 17.1') (Wide Angle)
(ISO Sensitivity: Auto) 0.6 m to 2.6 m (2.0' to 8.5') (Telephoto)
* Range is affected by optical zoom.
Flash Intensity
Adjustment
–2, –1, 0, +1, +2
Flash Charging Time Approximately 5 seconds
Recording
Snapshot (Auto/Premium Auto), High Speed Continuous
Shutter, Prerecord (Continuous Shutter), BEST SHOT,
BEST SHOT scenes for golf, Face detection, Super Resolution,
Macro, Self-timer, Movie recording (FHD Movie, STD Movie,
High Speed Movie, HDR ART Movie, Prerecord (Movie), For
YouTube) (stereo audio recording (High Speed Movie audio
recording supported at 30fps while shooting with HS30-120 or
HS30-240)), Snapshot in Movie (single-image, CS), Wind Noise
Cut
Monitor Screen
Viewfinder
3.0-inch TFT color LCD (Super Clear LCD)
460,800 (960 480) dots
x
Monitor Screen
Timekeeping
Functions
Date and Time: Recorded with image data
Auto Calendar: To 2049
World Time
162 cities in 32 time zones
City name, date, time, summer time
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
192
External connection
terminal
USB port (Hi-Speed USB compatible, USB charging),
AV output terminal (NTSC/PAL)
HDMI output (Mini)
Microphones
Speaker
Stereo
Monaural
x
Power Requirements Rechargeable lithium ion battery (NP-110)
1
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Number of Shots (CIPA) (Operating Time)*1
Continuous Playback (Snapshots)*2
325 shots
3 hours 50 minutes
Approximate continuous movie recording time
(High speed movie (HS 240))*3
1 hour 40 minutes
Approximate continuous movie recording time (FHD Movie)*3 1 hour 30 minutes
• Battery: NP-110 (Rated Capacity: 1200 mAh)
• Recording Medium: 16GB SDHC memory card (SanDisk Corporation)
• Measurement Conditions
*1 Approximate number of shots (CIPA) (Operating Time)
In accordance with CIPA (Camera and Imaging Products Association) standards
Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide and
full telephoto every 30 seconds, during which two images are shot with flash; power
turned off and back on every time 10 images are shot.
*2 Approximate playback time
Standard temperature (23°C (73°F)), one-image scroll approximately every 10 seconds
*3 Approximate time using a 16GB SDHC memory card for a repeated cycle of 10 minutes
recording followed by deletion of the recorded file.
• The above values are based a new battery, starting from a full charge. Repeated
charging shortens battery life.
• Frequency of flash, zoom, High Speed Continuous Shutter, and Auto Focus usage,
and the time the camera is on greatly affects recording time and number of shots
values.
Power Consumption
Dimensions
3.7 V DC, Approximately 4.3 W
x
x
101.9 (W) 58.7 (H) 27.4 (D) mm
x
x
(4.0" (W) 2.3" (H) 1.1" (D))
(22.6 mm (0.89") thick excluding projections)
Weight
176 g (6.2 oz) (including battery and memory card)
149 g (5.3 oz) (excluding battery and memory card)
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
193
. Rechargeable lithium ion battery (NP-110)
Rated Voltage
3.7 V
Rated Capacitance
1200 mAh
Operating Temperature
Requirements
0 to 40°C (32 to 104°F)
x
x
Dimensions
37.5 (W) 44.9 (H) 7.0 (D) mm
x
x
(1.48" (W) 1.77" (H) 0.28" (D)) (excluding projections)
Weight
Approximately 25 g (0.9 oz)
. USB-AC adaptor (AD-C53U)
Input Power
100 to 240 V AC, 50/60 Hz, 100 mA
Output Power
5.0 V DC, 650 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
x
x
Dimensions
53 (W) 21 (H) 45 (D) mm
x
x
(2.1" (W) 0.83" (H) 1.8" (D)) (excluding projections)
Weight
Approximately 37 g (1.3 oz)
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with
relevant national and/or international standards.
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
194
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
M29
MA1109-A
Download from Www.Somanuals.com. All Manuals Search And Download.
|