®
SIENA Owner’s Manual
READ AND SAVE THESE INSTRUCTIONS!
Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the product and proper
installation; therefore,before attempting to install and operate your Casablanca fan,read this owner’s manual completely and
carefully. Retain this manual for future reference.
CAUTION: To avoid possible electrical shock, make certain that electricity is turned off at the circuit breaker or fuse box
before attempting any installation procedure.
CONTENTS
INTRODUCTION
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safe Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
MOUNTING RECOMMENDATIONS
General Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Sloped Ceiling Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FAN INSTALLATION
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Crossbar Mounting Bracket Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Lag Screw Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Canopy Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Fan Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Blade Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
No Light Cap Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Hanging the Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Canopy Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Canopy Hatch Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Light Kit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
VERSA•TOUCH2™ CONTROL INSTALLATION
Control Bracket Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Changing Transmitter Frequency Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TROUBLESHOOTING TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CARE RECOMMENDATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
AUTHORIZED SERVICE CENTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PRODUCT SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
P5G73M AA1205
1
Download from Www.Somanuals.com. All Manuals Search And Download.
™
SIENA
MOUNTING RECOMMENDATIONS
GENERAL GUIDELINES
Before mounting your Casablanca fan, read the following helpful recommendations.The location of the fan, air circulation,
and fan size are all important factors to consider before installation.
Location
Ceiling fans have practical uses in almost every room in your home.We suggest you follow these mounting recommendations
as you decide where to install your Casablanca fan.
• For safety reasons, the fan blades must be a minimum of 7' above the floor.
• Do not locate the fan in a doorway or above a swinging door.
• In bedrooms, fans work best when mounted above the foot of the bed.
• Over pool tables, be sure to provide plenty of clearance to avoid damage from pool cues.
• In kitchens be sure to allow for open cupboard doors to clear the fan blades.
• Do not install a fan close to or over a pool or spa. High humidity combined with corrosive gases will destroy the finish and
warp the blades.
Fan Size
Variable fan speed capability permits the use of a full-size 52" fan even in smaller rooms. For very large rooms, two fans may
be needed.
SLOPED CEILING INSTALLATIONS
Maximum
Hang-Tru®
angle 32º
SUGGESTED EXTENSION POLE LENGTHS
Extension
Pole
Ceiling Height
Pole Length
8' 0"
8' 6"
9' 0"
standard
standard
6"
9' 6"
12"
10' 0"
11' 0"
12' 0"
13' 0"
14' 0"
12"
18"
24"
36"
Blades must be a
minimum of 7 feet
above the floor
7' minimum
48"
When to Use Extension Poles
For optimum performance and appearance, an extension
pole should be used with your Casablanca fan when
installing on high (cathedral) ceilings or sloped ceilings.
Casablanca offers standard poles in increments of 6" up
to 5'. Custom poles are available in lengths up to 9'9". See
your Authorized Casablanca Dealer for details.
This slope is less than 32º.
It is OK to install your fan.
EXAMPLE 1
NOTE: Fan may wobble or vibrate if pole length is not
long enough and inside blade is too close to downslope or
side wall.Extending pole length will usually solve problem.
This slope is 32º. This is the maximum
slope that will allow the fan to hang
straight down. It is OK to install your fan.
EXAMPLE 2
EXAMPLE 3
Calculation of Ceiling Angle
Use the tear-off Ceiling Angle Template card inserted in
this manual. It provides you with a simple “go”or “no-go”
for installing your fan on a sloped ceiling.
This slope is more than 32º. Your fan will not
hang straight down, an adaptor is necessary.
Contact your local Authorized Casablanca
Dealer in regards to purchasing a “Sloped
Ceiling Adaptor.”
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FAN INSTALLATION
GETTING STARTED
Installing a New Ceiling Fixture Outlet Box
If you do not have an existing fixture located where you
wish to place your Casablanca fan, an approved ceiling
fixture outlet box must be installed and wired.
Using Existing Ceiling Fixture Outlet Box
After turning the power OFF at its source (either the circuit
breaker or fuse box), lower the old fixture and disconnect
the wiring. Check the ceiling fixture outlet box to be sure
it is marked “Approved for Ceiling Fan Mounting.”If it is
not, a new box must be installed.
WARNING!
To reduce the risk of fire, electrical shock, or
personal injury, mount to outlet box marked
“Acceptable for Ceiling Fan Support” using the
mounting hardware provided with the outlet box.
Note: The weight of this fan is 38 pounds.
CROSSBAR MOUNTING BRACKET INSTALLATION
CEILING HARDWARE (not to scale)
Screw Pack A:
Lag Screw andWasher (1)
Wire Nut (4)
1" x 8-32 Roundhead Screw andWasher (2)
Crossbar Mounting Bracket
Joist
Note: After removing the old fixture, check the outlet
box to insure that it is supported by a joist or beam across
its upper surface. If not, a 2 x4 stud must be installed.
Step 1a. Remove the knockout plug in the center of the
Ceiling-Fan-
Approved
Wiring Box
CeilingWiring
1
2
outlet box or drill a / -inch hole for the lag screw to pass
1
4
through.Then drill a / -inch guide hole into the joist or
beam to a depth of 3 inches.
Step 1b. Route the outlet box wires through the keyhole
slot of the crossbar mounting bracket as shown. Attach
the crossbar mounting bracket to the outlet box with the
screws provided in Pack A, making sure the outlet box
wires are not pinched by the washer.
Crossbar Mounting
Bracket
Ridge side down
Washer
Green Ground Wire
CAUTION:
1" x 8-32
Roundhead Screw
To reduce the risk of personal injury, use only
the mounting hardware provided with the
approved outlet box to install the crossbar
mounting bracket.
WARNING!
Support directly to building structure only.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
™
SIENA
LAG SCREW INSTALLATION
NOTE: This step is required only under two conditions:
If the fan weighs 36 lbs. or more or if the existing ceiling
fixture outlet box needs to be modified for a ceiling fan
application (for example, if the house is not new
construction and you are replacing an existing light fixture).
We recommend that the ceiling box be of sufficient
capacity to support the weight of the fan and light fixture
under any conditions. If in doubt whether you need to
install the lag screw, consult a qualified electrician.
Step 2. With the large washer attached, pass the lag screw
(Pack A) through the center hole of the crossbar mounting
bracket and screw into the guidehole. Tighten until the
outlet box is mounted firmly to the beam. This box must
be secured to the ceiling firmly.
CANOPY INSTALLATION
CANOPY HARDWARE (not to scale)
Canopy Hatch
Pack B:
Canopy
Canopy Screws andWashers (5)
Step 3. Attach the canopy to the crossbar mounting bracket
1
2
with three of the 8-32 x 2 / " long canopy screws (Screw
Pack B) and lock washers provided with your Casablanca
fan. Tighten using the provided screwdriver until snug
against the ceiling.
NOTE: On sloped ceilings, align the canopy opening
with the top or peak of the room.
Feed outlet box
wires through
canopy opening
Canopy
LockWasher
Canopy Screw
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FAN PREPARATION
PERMA•LOCK™ HARDWARE (not to scale)
9" Perma•Lock™
3" Perma•Lock™
Downrod
and Ball Assembly
(for non-decora-
tive arm assembly
installations)
Downrod
and Ball Assembly
(for decorative
arm assembly
installations)
Uplight Lightbulbs
(4) A-15 40-watt
Decorative Arm
Assembly
AllenWrench
MotorWires
(leave at least 6" long)
IMPORTANT SAFETY INFORMATION:
Before starting the installation of your ceiling
fan, install the threaded downrod into the motor
coupling and lock the assembly.
GroundWire
(green)
Decorative Arm
Assembly
Perma•Lock™ Downrod
and Ball Assembly
Prepare for fan installation as follows:
Step 4a. Remove the caution shield from the motor.
AllenWrench
Step 4b. Using the provided Allen wrench (attached to
the paper motor warning shield),loosen the Allen set screw
attached to the motor coupling.
Tapered thread
Allen
Motor
Coupling
™
Step 4c. Slide the 9" Perma•Lock downrod and ball
Set Screw
assembly through the center of the Decorative Arm
assembly.
™
Step 4d. Route the wires through the Perma•Lock
downrod and ball assembly.
Step 4e. Insert the downrod into the motor coupling,
turning clockwise until it stops, ensuring that the pole
has bottomed out.
Motor Housing
Assembly
TIP: The downrod has a tapered thread that is designed
to lock completely when installed correctly.
Step 4f. Tighten the set screw with the Allen wrench to
ensure safe operation of your fan.If it is tight enough, you
should not be able to turn the downrod counterclockwise
with your hands. If in doubt, tighten the set screw with
the Allen wrench until you cannot turn it any further.
Caution Shield
Step 4g. Tighten collar screw on Decorative Arm
Assembly to secure.
3" Perma•Lock™ Downrod
and Ball Assembly
(for non-decorative arm
assembly installations)
CAUTION: Failure to fully lock in the downrod
before securely tightening the Allen set screw may
cause the fan to separate from the downrod and fall
during normal operation.
NOTE: Installation of the Decorative Arm Assembly is
optional. For installations without the Decorative Arm
Assembly, a 3" downrod is provided.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
™
SIENA
FAN PREPARATION (CONT.)
Installation/Replacement of Incandescent Lightbulbs
Step 5. Remove the two screws from the cover door as
shown and lift door from motor. Install a 40-watt S-11
type incandescent lightbulb in the socket.Replace the door
and re-insert the screws. Repeat twice more.
NOTE: When replacing lightbulbs, be sure to use only
40-watt maximum.
BLADE INSTALLATION
BLADE HARDWARE (not to scale)
Allen Screw Pack C:
Blade Screws andWashers (16)
Blades (5)
Allen
Wrench
Step 6a. Align the holes in the Siena® exclusive blade with
the holes in the bladeholder.
Step 6b. Using Screw Pack C and the Allen wrench
provided, install the Allen screws in the blade and
bladeholder as shown. Repeat for each additional blade.
CAUTION:
Blade screws must be tightened securely before
operating the fan.
NO LIGHT CAP OPTION
Note: If you are installing the accessory light fixture, skip
to Step 8a now.
Step 7a. Carefully tuck the light wires into the no light
cap, as shown.
Step 7b. Thread the no light cap into the adapter plate, as
shown.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HANGINGTHE FAN
Step 8a. To hang the fan body in the canopy, hold the fan
body firmly and insert the ball into the canopy opening.
Check that no wires are pinched.Rotate the fan body until
the slot in the ball fits into the pin opposite the canopy
opening.
Ball
Step 8b. Trim excess motor wires,leaving at least 6 inches
1
2
above the downrod.Strip / -inch insulation from the end
of each wire using a wire stripper (available at your local
hardware store).
Slot
Pin
CANOPY ELECTRICAL CONNECTIONS
Step 9. Attach the fan wires to the ceiling fixture outlet
box wiring by placing the bare ends of the wires side by
side and then securing with a wire nut. Test that the
connection is secure by pulling on the wire nut. Connect
in this order:
Wire Nut
• GREEN leads from mounting plate and downrod
assembly of fan to GROUND conductor of power
source. Secure with wire nut.
2 Black
Wires
• WHITE wire from fan to white NEUTRAL wire in
ceiling fixture outlet box. Secure with wire nut.
2White
Wires
• BLACK power wire from fan to BLACK power wire
in ceiling outlet box. Secure with wire nut
3 Green
Wires
NOTE: If the color of your ceiling wires differs from
that described, consult an electrician.
CANOPY HATCH INSTALLATION
Step 10a. Tuck the wires into the canopy with the wire
nuts pointed upwards, so that the WHITE and BLACK
wires are on opposite sides of the canopy and all wires are
clear of the canopy opening.
Step 10b. Install the canopy hatch with the last canopy
screw and lock washer using the provided screwdriver.To
do this, tilt the fan body away from the hatch opening.
Tighten the screws firmly.
Step 10c. Straighten the fan,then check to ensure there is
no movement between the canopy and the ceiling or the
™
Perma•Lock downrod and the ball assembly.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
™
SIENA
LIGHT KIT INSTALLATION
LIGHT KIT HARDWARE (not to scale)
Downlight Lightbulbs (3)
60-watt A-15
Glass Shade
Light Kit
Light Assembly Installation
Step 11a. Connect the light assembly connector to the
motor connector, as shown.
Step 11b. Carefully tuck the wires and align the light
assembly with the adapter plate.
Step 11c. Screw the finial rod into the adapter plate to
secure.
Install Glass Shades
Step 12a. Remove the three lock rings from the light fixture
and set aside.
Step 12b. Slide the glass shade into the fixture and hold
firmly. Using the glass locking rings removed in Step 14a,
secure each piece of glass firmly to the light fixture.
Assure each piece of glass is firmly installed by rotating
the glass clockwise until it is no longer loose.
Finial
Finial Rod
Install Incandescent Lightbulbs
Step 13a. Screw the three 60 Watt type A15 bulbs into
each socket.
Lock Ring
NOTE: When replacing lightbulbs, be sure to use only
60-watt maximum.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
VERSA•TOUCH2™ CONTROL INSTALLATION
VERSA•TOUCH2™ HARDWARE (not to scale)
Wood
Screw
1" (2)
Screw
6-32 X / "
(2)
Screw
6-32 X 1"
(2)
3
8
Drywall Anchor
6-32 (2)
12v Battery
W-73
Control Holder
W-73
Control
CONTROL BRACKET INSTALLATION
SAFETY FIRST: To reduce the risk of electrical shock, this fan must be installed with
an isolating wall control/switch. CAUTION! Do not use with wall dimmer.
Step 14 Follow instructions for the type of transmitter control bracket you will be using.
Standard
Toggle
Switch
Rocker
Light
Switch
Inner
mounting
holes
Outer
mounting
holes
Switch
Cover
Plate
Switch
Cover
Plate
Control
Bracket
Control
Bracket
Standard Light Switch
Rocker Light Switch
Step A. Break off the two tabs by pushing outward.
Step A. Remove the two screws holding the switch cover
plate. Do not remove the cover plate.
Step B. Remove the two screws holding the switch cover
Step B. Orient the control bracket as shown and line up
plate. Do not remove the cover plate.
the two inner mounting holes with those on the switch.
Step C. Orient the control bracket as shown and line up
Step C. Insert and tighten the screws using the provided
the two inner mounting holes with those on the switch.
screwdriver.
Step D. Insert and tighten the screws using the provided
screwdriver.
Wall Installation
Step A. Locate a 2x4
wall stud in a convenient
location.
Step B. Orient the
control bracket as shown
over the 2x4 stud.
Step C. Insert the 1"
wood screws in either
the inner or outer
mounting holes and
tighten using the
provided screwdriver.
NOTE: The wall anchors and 6-32 x 1" screws may be
used in situations where mounting to a stud is not possible.
Use the inner mounting holes. After securing the anchor,
discard the anchor’s pointed screws and use the 6-32 decor
ovalhead screws supplied.
Anchor
Panhead
Screw
Drywall Anchor
Wood
Screw 1"
Decor Ovalhead Screw
6-32 X 1"
10
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE OPERATION
Fan Control
DOWNLIGHT
To start the fan. Press the selected speed button to run the fan at the desired speed.
LOW=Low speed MED=Medium speed HIGH=High speed
To turn off the fan, press the FAN OFF button.
Send Signal
LED
UPLIGHT
Airflow Direction
MED
To reverse the airflow, press the REVERSE button. REVERSE operates at any speed
whether the fan is on or off. The fan returns to its set speed after reversing.
HIGH
LOW
Light Control
Turn the light on or off independently from the fan by pressing the LIGHT rocker
switch. (Press the left side for the uplight, right side for the downlight, and the middle for
both.) If you press the button for more than 0.7 seconds, it becomes a dimmer.The light
varies from “bright" to “dim” over approximately 8 seconds. If you continue to hold the
LIGHT button,this sequence will reverse when the light reaches its brightest or dimmest
level. Release the button when the desired level is reached.
FAN
OFF
REVERSE
Auto Resume
Quick (pressing less than 0.7 seconds) on/off operation of the LIGHT button maintains
the desired brightness level set previously.
CHANGINGTRANSMITTER FREQUENCY SETTING
Versa•Touch 2
Note: All fans leave the factory set to “00000.”
Control
(back)
You will only have to change the dip switch settings in the remote
if you are using more than one fan in the same area and want to
control them separately.
Step 1. At the circuit breaker or fuse box, turn the power off for
the fan you want to change.
Step 2. Open the battery door of the Versa•Touch control and
remove the batteries.
Step 3. Change the dip switch settings, assuring that they are
different from the previously installed Versa•Touch fan.
Dip Switch
set to “10000”
Dip Switch
set to “01001”
Step 4. Reinstall the batteries and the battery door on the control.
Step 5. At the circuit breaker or fuse box,turn the power back on
for the fan whose frequency you are changing.
WARNING!
Step 6. Within 20 seconds of restoring power, push the HIGH,
Do not turn the power off at the circuit breaker,
then back on, for the previously installed
Versa•Touch2 fan(s), as you may inadvertently
change the frequency settings for it as well.
MED, and LOW buttons (in that order).
Note: You may want to label your controls to assure you do not
mix them up.
2
If the fan is not functioning after installation:
Step 1. Check to make sure the batteries are installed correctly in
the control.
3
1
Step 2. Turn the power off to the fan (from the circuit breaker)
for at least 5 seconds.
Press in this order to set new
frequency:
Step 3. Turn the power back on (at the circuit breaker) and push
the HIGH, MED, and LOW buttons–in that order–within 20
seconds. The fan should now function properly.
Circuit Breaker
or Fuse Box
1. HIGH 2. MED
3. LOW
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING TIPS
Please refer to this troubleshooting guide before requesting service or contacting your dealer for assistance.
PROBLEM
POSSIBLE REMEDIES
Fan will not start
• Check the main circuit fuses, circuit breakers, and wall switch position. Check
all wire connections. Make sure the power is turned off during this inspection.
• The battery is weak. Install a fresh battery.
• The fan receiver is defective. Replace the fan receiver.
• Check the frequency setting: Turn the power off at the circuit breaker for the
fan that is not functioning only. Check that the jumper switches match in both
the receiver and the transmitter.
Fan wobbles or shakes excessively
• Be sure the canopy pin is set properly into the slot on the ball.
• Check that the bladeholders have not been bent during installation and the
blades are balanced.
• The hanger bracket and/or the ceiling outlet are attached too loosely. Make
sure the hanger bracket is attached tightly to the ceiling outlet box and the
downrod assembly is secured firmly.
• The downrod is attached to the downrod base too loosely. Make sure all the
screws are securely tightened.
Fan is noisy during operation
• Check and tighten the light fixture retaining screws, glass shade screws, and/or
lightbulb(s).
• Tighten the canopy screws and mounting plate assembly. Make sure the wire
nuts inside the canopy and switch housing are not touching the metal parts and
that they have not fallen off the wire splices. Tighten as necessary.
• Tighten the blade holders to the flywheel (or direct drive motor) and the blades
to the bladeholder screws.
• Make sure all the screws in the motor housing are snug but not overly tight.
• If fan is new, it may need to be “broken in.”Run at high speed for several days.
• Replace with alkaline batteries.
Fan does not run on low speed
Battery life is short
Light works, but fan does not work
Fan and light run only on full speed
Fan is missing one speed
• The fan wires are not connected properly. Follow the instructions in Step 11.
• The fan receiver is defective. Replace the fan receiver.
• The fan receiver is defective. Replace the fan receiver.
Fan does not change speed, but light works • The fan receiver is defective. Replace the fan receiver.
Reverse does not work
• The fan receiver is defective. Replace the fan receiver.
Fan starts working by itself
• There is frequency interference. Change frequency as described on Page 11.
Fan operates only when transmitter is close • Check that antenna wire is not touching the metal plate.
Fan works, but light does not dim
Fan works, but light does not work
• The fan receiver is defective. Replace the fan receiver.
• The fan receiver is defective. Replace the fan receiver.
• The light socket is broken. Replace the socket.
• A lightbulb is defective. Replace the lightbulb.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
™
SIENA
CARE RECOMMENDATIONS
Fan Finishes
• For cleaning, a soft brush or lint-free cloth should be used to prevent scratching the finish.
• A vacuum cleaner brush nozzle can remove heavier dust.
• Surface smudges or an accumulation of dirt and dust can be removed easily using a mild detergent and slightly dampened
soft cloth. An antistatic agent may be used, but never use abrasive cleaning agents as these will damage the finish.
Blades
• Wood-finish blades should be cleaned with a furniture polishing cloth.Occasionally,a light coat of furniture polish may be
applied for added protection and beauty.
• For painted and high-gloss blades, surface smudges or an accumulation of dirt and dust can be removed easily using a mild
detergent and slightly dampened soft cloth. An antistatic agent may be used, but never use abrasive cleaning agents as these
will damage the finish.
No Need for Lubrication
• Never lubricate this fan! The precision motor at the heart of your Casablanca fan features sealed bearings that are lubricated
for life.
• Do not attempt to oil the motor.
Changing Lightbulbs
• Be sure to turn the power to OFF at the wall switch or circuit breaker before changing lightbulbs.
• Replace bulbs with the same type as you removed from the light fixture.
• The maximum wattage rating for this fan’s light kit is 120 watts for the uplight, 180 watts for the downlight.
For questions or to locate the nearest Casablanca Authorized Service Center call toll free: 1-888-227-2178
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1.This device may not cause harmful interference.
2.This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the
FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communication. However, there is no guarantee that the interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Any changes or modifications to the transmitter or receiver not expressly approved by Casablanca Fan Company
may void one's authority to operate this remote control.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTHORIZED SERVICE CENTERS
STATE/CITY
ZIP
SERVICE CENTER NAME
PHONE
TYPE
STATE/CITY
ZIP
SERVICE CENTER NAME
PHONE
TYPE
ALABAMA
MOBILE
TUSCALOOSA
HUNTSVILLE
LOVELAND
80538 FIRESIDE LIGHTING INC.
970-669-3540
719-471-3520
970-226-3430
303-485-8600
OWTS
OWTS
OWTS
OWTS
36618 AZALEA CITY SERVICE CENTER
35405 LTG. & APPL./LIGHTING PLUS
35816 SOUTHERN HOME & HEARTH INC. 256-534-1715
251-341-0663
205-345-8900
COLORADO SPRINGS 80903 HOME LIGHTING INC.
FORT COLLINS
LONGMONT
80525 THE LIGHT CENTER
80501 LUMENAREA.COM INC.
ALASKA
ANCHORAGE
CONNECTICUT
NEW HARTFORD
BRIDGEPORT
CLINTON
EAST HARTFORD
WOODSTOCK
WILLINGTON
HARTFORD
99518 PRIMARY ELECTRIC INC.
907-563-7988
06057 B.W. MORSE & SONS.INC.
06605 FEDERAL ELECTRIC CONST.CO.
06413 GRAHAM CO.
860-379-9855 10 -MILE RADIUS
203-334-6455
800-942-5575
ARIZONA
TUCSON
PHOENIX
GREEN VALLEY
SEDONA
85735 DESERT BREEZE FAN & ELEC.
85019 FAN-TASTIC ELECTRIC
85614 GOBLE ELECTRIC
86336 OAK CREEK AUDIO
86305 MARC PARENT/ELECTRICAL ETC. 928-778-5935
520-623-4646
602-866-1090
520-625-4938
928-282-5625
06118 GRAHAM CO.
800-942-5575
06281 RANDY MATTEAU
860-963-8979
06279 GEORGE OPALENIK
06114 CONNECTICUT LTG. CTR. INC.
06830 FASHION LIGHT CENTER
06534 NEW GRAND LIGHT
860-684-4558
860-249-7631
203-869-3098
203-777-5781
ISO
ISO, OWTS
ISO
PRESCOTT
GREENWICH
NEW HAVEN
LAKE HAVASU CITY 86403 SOUND BANK ELECTRONICS
928-855-1129
602-996-9637
602-978-0004
602-482-1881
520-782-4353
480-827-9302
480-962-0477
ISO
ISO
SCOTTSDALE
GLENDALE
PHOENIX
YUMA
MESA
MESA
85254 VANDERVOORT ELECTRIC INC.
85308 BEA’S LAMPS & FANS
85032 THE BRASSWINDS SHOPPE
85364 CURLEY’S LITEHOUSE
85210 LOUD INC. DBA FANS PLUS
85204 GALLERY OF FANS
DELAWARE
DOVER
NEW CASTLE
19901 BRUCE DRAJEM/ THE FAN MAN
19720 ERIC SHURR
302-734-7737
302-998-5147
FLORIDA
WINTER HAVEN
GAINSVILLE
JACKSONVILLE
SOUTH DAYTONA
BOYNTON BEACH
WINTER HAVEN
NE PALM BAY
NAPLES
33880 ALL ABOUT FANS & LIGHTING
32608 AUTHORIZED APPLIANCE SERV.
32217 AUTHORIZED APPLIANCE SERV.
32119 BOB’S FIX-IT
863-299-9593
352-375-3886
904-737-5312
386-761-4055
TUCSON
YOUNGTOWN
TUCSON
85716 ILLUMINATIONS ON BROADWAY LLC 520-325-3031
OWTS
OWTS
ISO
ISO
85363 QUALITY HOME FAN DOCTOR
85711 SUN LIGHTING CO.
602-274-6649
520-322-4303
ARKANSAS
LITTLE ROCK
33437 C M S
561-736-0170 W PALM BEACH
72212 THE RANDY HALL CO. INC.
501-227-9915
33884 CYPRESS LIGHTING SHOWROOM 800-975-2677
32905 FAN DOCTOR/ M. FERRUZZO
34110 GOODWIN ELECTRIC
34606 FAN DOCTOR/KEN R. CHURCHES 352-683-4428
33330 LASERLAND INC.
34275 GRAHAM ELECTRICAL CONTR.
33134 MICHAEL HANSEN
32751 HENRY ELECTRIC CO.
321-728-5638
239-649-8880
CALIFORNIA
SANTA ROSA
GRASS VALLEY
JAMESTOWN
SANTA MARIA
AUBURN
SAN DIEGO
FRESNO
NEWHALL/SANTA
CLARITA
ATASCADERO
CLOVIS
SIMI VALLEY
CORONA
BAKERSFIELD
SAN MARCOS
STOCKTON
MOORPARK
SHINGLE SPRINGS
CATHEDRAL CITY
PLEASANTON
RIVERSIDE
95404 ASEF’S APPLIANCE SERVICE
95945 ACCENT LIGHTING
95327 DASILVA’S LAMP & CEILING
93455 EVER-READY ELECTRIC
95603 THE FAN DOCTOR
92115 JOHN SHEPARD’S ELECT. SERV.
93704 LARRY MC COLLUM
91321 DAN MARTIN
707-575-3737
530-477-5483
209-984-4035
805-934-7091
530-823-8768
619-460-4132
559-438-5764
805-252-5769
SPRINGHILL
DAVIE
NOKOMIS
ISO
854-558-3743
941-486-8190
305-444-4111
407-834-4032 IN SHOP ONLY
954-360-9024
CORAL GABLES
MAITLAND
DEERFIELD BEACH 33442 JARMO ELECTRIC INC.
TARPON SPRINGS
CLEARWATER
PUNTA GORDA
ORLANDO
TALLAHASSEE
PORT CHARLOTTE
BRANDON
34689 PETER LONTAKOS ELECTRICAL
33765 STEPHEN J. MERCER/ELECTRICAL 727-712-3090
727-938-8895\
33982 SELECT SERVICE & REPAIR
32807 MID-FLORIDA FAN
32303 JIM LACZKO/TODAY’S KIDS
33952 JACKSONS LIGHTING INC.
33511 LUMENAIR LTG. & FANS
34109 WILSON LIGHTING OF NAPLES
941-637-7850
407-893-6226
850-562-4661
941-625-0044
813-653-3460
93422 MC NAMARA ELECTRIC INC.
93612 OMEGA SERVICE INC.
93065 PURCOM SYSTEMS
92881 JERRY F. PRYOR
805-466-1854
559-299-0495
805-583-8171
909-279-7775
ISO/OWTS,
ISO
OWTS
ISO
ISO
93309 RB ELECTRIC & LTG.
92069 RD ELECTRICAL CONTR.
95205 RISSO ELECTRIC INC.
93021 R.J. SIEG ELECT. CO.
95682 JOHN ROZOWSKI CONST.
92234 R & R SERVICE
805-831-2438 15-MILE RADIUS
760-727-1215
209-466-0781
800-799-0808
530-677-3850
NAPLES
941-592-6006 OWTS/ISO ANY
GEORGIA
COLUMBUS
GRAYSON
31904 GRADY GLASS DBA DAN’S FAN CITY706-571-3242
30017 RG TENNEY ELECTRIC
30188 BRUCE A. RUGG, GC
ISO
770-378-9255
404-925-1133
760-324-2942
WOODSTOCK
94588 S & L LIGHTING SERVICES
92505 VERNE SMITH
925-895-3762
951-687-9552
HAWAII
KAILUA KONA
HILO
AIEA
KAILUA KONA
KAHULUI
96740 KU’S ELECTRONIC SVC.
96720 BAY LIGHTING & DESIGN
96701 THE FAN SHOP, INC.
96740 KONA COAST HOUSE OF LTS. INC. 808-329-0748
96732 READ LIGHTING
808-329-4346
808-961-5688
808-488-1221
TEMECULA
SO. LAKE TAHOE
CANYON LAKE
VALENCIA
SAN JOSE
SACRAMENTO
TULARE
92592 TAB ELECTRIC
96150 TAHOE POOL SERVICE
92587 VILLAGE LIGHTS
91354 FANTASTIC FAN SERVICE
95123 SAL ZAMORA’S FAN REPAIR
95819 A & A LIGHT FIXTURES
93274 ANCHOR LIGHTING
93710 ENERGY HOUSE
92069 FAN DIEGO #1
92111 FANDIEGO
92270 FANDIEGO INC.
92562 FANDIEGO #4
93306 HILLCREST LTG-GALPIN INT
94109 HOUSE OF FANS INC.
91356 HYE LIGHTING CO.
95928 J&J LIGHTING INC.
93711 JAMES & CO LTG.
95336 MANTECA LIGHTING
92691 MOORE’S MISSION
96002 NORTH VALLEY LIGHTING
90703 COMFORTS OF HOME
95350 PHILLIPS ELECTRIC CO.
94901 RAFFLES
951-303-0850
530-541-4958
OWTS
951-244-2910
800-800-3871
510-742-5560
916-452-7641
209-688-0696
559-432-1500
760-743-3267
619-292-9244
760-779-9916
951-600-7867
805-324-9966
415-885-1947
818-345-5544
530-342-1815
209-486-7900
209-823-1999
ISO
808-871-8995
ISO
OWTS
ISO
ISO
ISO
IDAHO
MERIDIAN
IDAHO FALLS
83642 S-K ELECTRIC, INC.
83402 HOME LIGHTING
208-941-6264
208-523-2300
FRESNO
SAN MARCOS
SAN DIEGO
RANCHO MIRAGE
MURRIETA
BAKERSFIELD
SAN FRANCISCO
TARZANA
CHICO
FRESNO
MANTECA
MISSION VIEJO
REDDING
ILLINOIS
ISO
ISO/OWTS
CENTRALIA
RICHMOND
CHICAGO
PRINCETON
CHAMPAIGN
BELLEVILLE
SPRINGFIELD
NORMAL
SPRINGFIELD
CORNLAND
QUINCY
TRENTON
CHAMPAIGN
YORKVILLE
62801 BAKER APPLIANCE REPAIR
60071 CARAVELLE LIGHTING INC.
60630 D & S FAN SPECIALTIES INC.
61356 ELMORE ELECTRIC INC.
61821 TERRY GOBBLE
62223 JOHN HASSENSTAB
62704 HOME WORKS INC.
61761 KIRK SMALL APPLIANCE
62707 SHAWN SCHALK
62519 DELMAR VEECH
62301 HEINTZ LIGHTING CENTER
62293 LITE BRITE DIST
61821 SPRINGFIELD ELEC SPLY #3
60560 UNIFIED SUPPLY INC.
618-532-8437
815-678-4558
847-824-2430
815-643-2354
217-384-5891 IN SHOP ONLY
618-398-4640
217-753-3305
309-452-5248
217-585-0670
217-364-4121
217-223-0101
618-224-7314
217-351-7600
630-553-0660
ISO
ISO
ISO/OWTS
ISO
ISO/OWTS
ISO
NO IN SHOP
ISO
714-859-7090 HOME/ISO/OWTS
ISO
530-221-6277
562-865-6666
209-524-6287
415-456-6660
831-423-7411
714-848-4353
800-339-3267
ISO/OWTS
CERRITOS
MODESTO
OWTS
ISO
ISO
SAN RAFAEL
SANTA CRUZ
HUNTINGTON BEACH 92647 THE TRADING POST
ISO
ISO
95062 RIVERSIDE LIGHTING
OWTS
SAUGUS
91350 VALLEY BREEZE FAN CO
INDIANA
EVANSVILLE
FORT WAYNE
GREENFIELD
VALPARAISO
INDIANAPOLIS
47711 MICHAEL BAXTER
46805 CARL J. SMITH
46140 D & D REPAIR
46383 D & K ELECTRIC
46222 INDIANA LTG. CTR.INC.
812-453-6498
260-484-7295
317-467-0600
219-464-7576
317-293-9333
COLORADO
LONGMONT
DENVER
80504 L A ENTERPRISES
80229 M.D ELECTRIC
800-299-0222
303-288-7988
TYPES OF SERVICE OFFERED:
IOWA
CEDAR RAPIDS
SIOUX CITY
52404 ACME ELECTRIC COMPANY
51106 DIVERSIFIED ELECTRONICS
319-365-8677
712-276-1034
ISO = IN-SHOP ONLY
OWTS = PRODUCT SOLD BY DEALER
ISO/OWTS = BOTH
14
Download from Www.Somanuals.com. All Manuals Search And Download.
™
SIENA
STATE/CITY
ZIP
SERVICE CENTER NAME
PHONE
TYPE
STATE/CITY
ZIP
SERVICE CENTER NAME
PHONE
TYPE
ISO
IOWA (CONTINUED)
SIOUX CENTER
DES MOINES
MONTICELLO
CARROLL
NEBRASKA
OMAHA
GRAND ISLAND
OMAHA
NORFOLK
LINCOLN
51250 HILLS HOME SYSTEMS
50311 ADVANCED LIGHTING
52310 REM ELECTRIC INC.
51401 J & L ELECTRIC INC.
52241 RALSTON CREEK
712-722-2539
515-255-5009
319-465-3346
712-792-2444
319-351-2189 OWTSH/ISOA
563-323-3611
68104 D & L ELECTRONICS
68803 QUALITY SEW & VAC.
68144 OAK HILLS ELECTRIC INC.
68701 THE POWER STATION/FROHBERG ELEC.402-371-6671
68510 LINCOLN LIGHTING CTR.
402-571-5233
308-382-7310
402-691-4567
OWTS
ISO
CORALVILLE
DAVENPORT
402-476-1297
52803 SHAW ELECTRIC INC.
NEVADA
KANSAS
WICHITA
EMPORIA
OVERLAND PARK
OVERLAND PARK
WICHITA
MANHATTAN
TOPEKA
LENEXA
SALINA
OVERLAND PARK
OVERLAND PARK
SPARKS
LAS VEGAS
LAS VEGAS
89431 EAGLE ELECTRIC, INC.
89103 KS&S ELECTRIC, LLC
89119 FANCO
775-356-7300
702-222-9306
702-898-8522
67211 ACTION APPLIANCE SERVICE INC. 316-263-0652
ISO
66801 C.A.P.
316-342-0448
913-897-6767
913-338-5330
316-636-1278
785-776-4472
785-267-0422
913-888-0888
785-827-1420
913-685-2000
913-642-1500
66213 KAL ELECTRIC INC.
66210 RANDY RUSSELL
NEW HAMPSHIRE
NEW IPSWICH
EXETER
03071 HOUSE DOCTOR
03833 EDWARD HEINE
03060 AFFORDABLE FANS ETC.
603-731-5036
603-772-2359
603-759-8332
67226 ACCENT LTG INC.
66502 ENDACOTT LIGHTING
66611 K & S LIGHTING
NASHUA
66215 RENSEN HOUSE OF LIGHTS
67401 SALINA APPL. SHOWROOM
66223 WESTERN CHANDELIER CO.
66212 WILSON FANS & LIGHTING
ISO
NEW JERSEY
BELLMAWR
WASHINGTON
TRENTON
08031 JOSEPH ASHLEY
07882 C.P. ORLANDO
08619 WIRING UNLTD./RICHARD DOBRON 609-584-1122
609-694-3785
908-689-4750
THOROFARE
MORRIS PLAINS
LINWOOD
RANDOLPH
W. LONG BRANCH
MULLICA HILL
JACKSON
08086 HARRY R. HABICHT
07950 MANNY HERRERA
08221 JACK BRESLAU-HANDYMAN SVCS. 609-601-1797
07869 ANTHONY MAKOMASKI 908-475-5569
07764 CHRIS KIBBE/NO SHORTS ELECTRIC 732-222-4228
856-845-2541
973-993-1137
KENTUCKY
LEXINGTON
40510 CHARLET ELECT./RON CHARLET 606-231-7344
20 MI. RAD.
ISO
LOUISIANA
LAFAYETTE
HOUMA
BATON ROUGE
MONROE
NEW IBERIA
LAKE CHARLES
METAIRIE
70501 ACADIA SERVICE CO.
70363 GULF SOUTH ARMATURE
70815 HOME APPLIANCE SERVICE
71201 ALBERT SURLCO
318-233-8910
985-872-0486
504-272-7725
318-699-0619
318-364-7486
08062 STEPHEN RICE
856-223-8645
732-363-3729
908-879-7200
201-391-7685
ISO
ISO
ISO
08527 ROBERT ROLZHAUSEN
07930 CHESTER LIGHTING, INC.
07656 KRELL LIGHTING
CHESTER
PARK RIDGE
OWTS
OWTS
70560 WALET’S INC.
70601 JOSEPH’S ELECTRICAL CTR INC. 318-436-4930
NEW MEXICO
ALBUQUERQUE
ROSWELL
ALBUQUERQUE
ALBUQUERQUE
70006 ROMAINE’S
504-887-7077
87123 FRANK’S ELECTRIC
88201 J & G ELECTRIC CO.
87112 A-1 LAMP DOCTOR
87109 B-ELECTRIC
505-293-6724
505-622-0146
505-296-5050
505-828-0241
ISO
MAINE
SOUTH PORTLAND 04106 T.A. NAPOLITANO
207-799-0538
NO CLIPS
SANTA FE
ISO
MARYLAND
FREDERICK
WHITE HALL
FORESTVILLE
21704 GL FAN SERVICE
21161 BT ELECTRIC/BILL TYRRELL
20747 BURGESS LIGHTING
301-831-4925
410-329-6353
301-568-8000
NEW YORK
COMMACK
BROOKLYN
ALBANY
E. MEADOW
BUFFALO
QUEENSBURY
HASTINGS
BUFFALO
PLAINVIEW
NEWBURGH
STATEN ISLAND
YONKERS
POUGHKEEPSIE
ROCHESTER
LONG BEACH
SHOKAN
LYNBROOK
STATEN ISLAND
REGO PARK
AMHERST
SCHENECTADY
TROY
11725 AIR-TEK DBA REPUBLIC LIGHTING 631-499-1854
11204 JERRY PICCOLINO/J&R SERVICE
12205 BERT ELECTRIC
11554 C.D. SERVICE
14206 CRAFTMASTERS SERVICENTER
12804 DEAN ELECTRIC
13076 ELECTRICAL WORK BY MARTY
14226 THE FAN COLLECTION, INC.
11803 JOSEPH GOTTDANK
12550 J D PARRELLA ELECT.
10312 JOE VALLETUTTI JR..
10704 JAY D. KOSACK
12601 MANNINO ELECTRIC INC.
14620 BARRY MALADY DBA CAM ELECTRIC 585-271-8560
11561 NICK’S IMPROVEMENT COMPANY 516-659-8989
12481 OLIVE FANS & LTG.
11563 SHADERITE-PZ REPAIR
10301 FRANK RAGUCCI/F&R SERVICE CNTR. 718-273-5518
11374 MARK RALIN
14228 SHANOR LTG. CTR.
12303 FRANK SALVATORE
12180 TROY LIGHT COMPANY
11725 TURNPIKE APPLIANCE
10304 V & P SERVICE CO/VITO PICCOLINO 718-447-7945
10965 BOB VAZQUEZ
ISO,OWTS
718-259-1789
518-869-7140
516-538-3481
716-893-9557
518-792-4781
315-668-0220
716-839-2447
516-932-7618
845-562-4112
718-608-9008
914-237-9051
914-452-3520
MASSACHUSETTS
S. ATTLEBORO
BRIDGEWATER
MAYNARD
W SPRINGFIELD
NATICK
DANVERS
DENNIS
WORCESTER
NEW BEDFORD
ORLEANS
02703 AJ ELECTRIC
508-761-5021
508-697-7630
978-897-9085
413-734-4976
508-653-3042
978-774-7801
508-385-7536
508-755-3735
20 MI. RAD.
ISO
20-MI. RAD.
ISO
02324 BILTCLIFFE ELECTRIC
01754 HOUSE DOCTOR
01089 JALBERT ELECTRIC
01760 J.G. ELECTRIC CO INC.
01923 PLAZA LIGHTING
02638 RICK SEXTON
ISO
ISO
01603 EDWARD A. TORTORA
02740 VANDER ELECTRIC & EQUIP. CO. 508-993-6383
02653 ASSOCIATED ELECTRICAL SERV. 508255-4589
ISO
IN SHOP
MICHIGAN
BELLEVILLE
LANSING
LANSING
TRAVERSE CITY
HOWELL
BIRMINGHAM
GRAND RAPIDS
KALAMAZOO
845-657-5823
516-593-8973
48111 MIKE AYERST
48906 INTEGRITY ELECTRIC
734-699-9698
517-484-0300
517-627-4229
231-938-1332
810-227-3375
248-645-6464
616-949-4931
269-343-4428
48917 LARGENT ENTERPRISES INC.
49686 CREATIVE LTG. & RESTORATION
48855 LIGHTNING ELECTRIC INC. CO
48009 21ST CENTURY ELECTRIC
49512 GRAND RAPIDS LTG. CTR. INC.
49002 HODGSON ENTERPRISES
718-896-7844
716-691-3622
518-355-5789
518-274-6931
631-499-3355
QUEENS
ISO
ISO
ISO
20-MI. RAD.
OWTS,ISO
OWTS
COMMACK
STATEN ISLAND
PEARL RIVER
BEDFORD
CARLE PLACE
BROOKLYN
BROOKLYN
NANUET
845-735-5861
914-666-0680
516-747-4748
718-436-2207
718-998-1111
914-623-5211
716-832-1492
212-677-9191
MINNESOTA
ROCHESTER
MINNEAPOLIS
MAPLEWOOD
MINNEAPOLIS
PLYMOUTH
BURNSVILLE
EDEN PRAIRIE
ST. PAUL
10507 BEDFORD LIGHTING INC.
11514 LIGHTING CTR. BY CAMEO INC.
11219 MAIN LAMP CORP.
11223 MANHATTAN LIGHTS INC.
10954 NOVA LIGHTING, INC.
14226 ROYALITE INC.
ISO
ISO
ISO
55906 KROUPA’S ELECTRONICS
507-281-4064
55422 LEO’S ELECTRIC SALES & SERVICE 612-546-5625
55109 NORTH COUNTRY ELECTRIC
55411 PENN ELEC. MOTOR SERV.
55441 FAN MAN #101 (FLOWC #21)
55337 FAN MAN #102 (FLOWC #22)
55344 FAN MAN #106 (FLOWC#26)
55108 FAN MAN #107 (FLOWC #27)
56425 THE LIGHT DEPOT
651-748-4027
612-588-5333
612-559-0761
612-898-2754
612-941-9243
651-649-0686
218-829-0770
ISO
ISO
ISO
ISO
ISO
ISO
ISO
AMHERST
NEW YORK
10003 SUPERIOR LIGHT & FAN
NORTH CAROLINA
SALISBURY
CHARLOTTE
HICKORY
BAXTER
28146 HAUSS ELECTRICAL SERV.
28205 EFIRD’S INTERIORS, INC.
28602 EFIRD’S INTERIORS, INC.
28203 SIMPSONS LIGHTING /LT.FIXT
704-637-7774
704-376-5648
704-322-2203
704-376-5463
ISO
ISO
OWTS
MISSISSIPPI
MADISON
OCEAN SPRINGS
39110 JACKSON SERVICE CTR.
39564 KELLY’S APPLIANCE
601-856-9469
228-872-7181
CHARLOTTE
ISO
NORTH DAKOTA
FARGO
MISSOURI
SPRINGFIELD
ST LOUIS
SPRINGFIELD
BRANSON
58102 MIDSTATES ELECTRIC INC.
701-293-0441
65802 COMPLETE MAINTENANCE
63123 LEINWEBER SERVICE CO.
65804 LOYD’S ELECT/LIGHTHOUSE GALL. 417-889-1088
417-866-2700 SECONDARY
314-892-8177
OHIO
CANTON
COLUMBUS
LOVELAND
MAUMEE
DAYTON
44706 APPLIANCE PARTS CO.
43235 CERTIFIED SYSTEMS
45140 HANK GRINSHPAN
43537 K.O.V ELECTRONIC REPAIR
45419 LARKIN ELECTRIC CO.
43231 THE LAMP LIGHTER
330-453-8077
614-799-0778
513-683-8666
419-865-8893
937-294-4115
614-891-7940
ISO
65616 LOYD’S ELECTRIC SUPPLY INC.
417-334-2171
MONTANA
KALISPELL
HELENA
59901 LASALLE LIGHTING
59601 SUPREME LIGHTING
59801 WESTERN MONTANA LTG SPY
406-752-2424
406-442-8200
406-543-7166
COLUMBUS
MISSOULA
ISO
15
Download from Www.Somanuals.com. All Manuals Search And Download.
STATE/CITY
ZIP
SERVICE CENTER NAME
PHONE
TYPE
ISO
STATE/CITY
ZIP
SERVICE CENTER NAME
PHONE
TYPE
OHIO (CONTINUED)
CLEVELAND
N. OLMSTED
NORTH LIMA
SOUTH EUCLID
DAYTON
AUSTIN
78757 KLOCK ELECTRIC
78942 ORSAG’S INC.
512-837-4704
409-542-3167
806-792-2821
817-478-2004
903-566-3119
409-280-5737
972-446-9393
281-446-7613
44109 WESTSIDE LTG. CTR.
44070 CHANDELIER SHACK INC.
44452 DICKEY ELECTRIC
44121 LAMPSHADER EAST/DBA LTG. EXPO
45459 OHIO LAMP & FIXTURE CO.
216-459-1970
440-777-6969
330-549-3976
216-291-3030
937-439-0822
GIDDINGS
LUBBOCK
ARLINGTON
TYLER
XHEARE
CARROLLTON
HUMBLE
79413 ORECK VACUUMS
76001 P&M QUALITY CONT.
75707 CHARLES R. RAINS
77859 THOMPSON SUPPLY
75006 ADFANTAGE CEILING FAN
77338 CAROLS LTG. & FAN SHOP
78703 TEXAS CEILING FANS/CEILING FAN SHOP 512-477-3132
77069 CHAMPIONS LIGHTING
75080 COOL BREEZES
76053 ARC FAN & LIGHTING
77702 FAN FACTORY
75206 LIGHTS FANTASTIC
77904 HALL ELECTRIC CO., INC.
76904 HERITAGE HAUS
76308 LANTERN HOUSE INC.
77063 LIGHTING PLUS INC.
78550 THE LIGHT HOUSE
78504 THE LIGHT HOUSE
77474 TEXAS CEILING FANS
OWTS/ISO
ISO
OKLAHOMA
ISO
ISO
ISO
OKLAHOMA CITY
OKLAHOMA CITY
OKLAHOMA CITY
73105 APPLIANCE SERVICE BY CK
73132 LARKIN E. STEVENSON
73127 JAMES LIGHTING INC.
405-525-8862
405-728-8810
405-947-6663
AUSTIN
HOUSTON
RICHARDSON
HURST
BEAUMONT
DALLAS
VICTORIA
SAN ANGELO
WICHITA FALLS
HOUSTON
HARLINGEN
MCALLEN
SEALY
281-440-5339
972-690-4580
817-268-2218
409-833-8207
214-987-9655
512-578-6221
325-949-6541
940-692-7381
713-784-2440
956-423-6664
956-631-1155
979-885-6900
ISO,OWTS
ISO
OREGON
PORTLAND
BEND
97225 SYLVAN ELECTRONICS INC.
97701 DESIGN LIGHTING INC.
800-473-1244
541-389-9997
ISO
ISO
PENNSYLVANIA
HOPWOOD
DREXEL HILL
ALLENTOWN
PITTSBURGH
PHILADELPHIA
EASTON
ISO
ISO
OWTS
OWTS
ISO
15445 GEORGE R. SMALLEY CO. INC.
19026 PATRICK HASTINGS
18105 LIGHTING FIXTURE & SUPPLY CO 610-435-9691
15224 MARK DIULUS ELECTRIC CO.
19111 KLAUS OTTE
18045 PRIMROSE ELECTRICAL
18102 SCHOLL’S ELECTRIC
17601 S. DEAN’S ELECTRIC
19382 TOBIAS ELECTRIC
19030 ASTRO LTG. GALLERIES
19611 A TO Z VACUUM STORES
17111 YALE ELECTRIC SUPPLY
19428 KAY ELECTRIC SUPPLY
19090 NORTH-WEST ELEC. SUPPLY CO. 215-659-5757
16803 WHITEHILL LIGHTING & SPLY. 814-238-2449
724-437-1927
610-853-2709
412-681-2553
215-745-4266
610-258-1359
610-435-5876
717-2854545
UTAH
ALLENTOWN
LANCASTER
MURRAY
RIVERTON
LAYTON
84107 CENTRAL ELECTRIC CO.
84065 VERN O. FRANCIS
84040 HARUO YOSHIKAWA
801-467-5479
801-254-4178
801-546-6008
WEST CHESTER
FAIRLESS HILLS
WEST READING
HARRISBURG
CONSHOHOCKEN
WILLOW GROVE
STATE COLLEGE
610-942-4000 IN HOME ONLY
215-943-0331
610-374-4888
717-233-8401
610-825-0100
ISO
OWTS
ISO
VIRGINIA
RICHMOND
BURKE
WILLIAMSBURG
VIRGINIA BEACH
23228 FANNING ELECTRICAL SERVICE
22015 L&S ELECTRIC INC.
23185 TAPROOT COMPANY
804-262-3681
703-237-0011
757-229-3722
757-422-3616
ISO
ISO
23451 FANS,LIGHTING, ‘N’ MORE
RHODE ISLAND
PAWTUCKET
WASHINGTON
SPOKANE
TACOMA
WENATCHEE
PASCO
BELLINGHAM
YACOLT
YAKIMA
02861 WICKFORD APPLIANCE & LTG CTR. 401-726-4240
ISO
ISO
99216 BRITE-WAY ELECTRIC
98404 M.G.M. ELECTRONICS
509-922-0275
253-752-9826
SOUTH CAROLINA
HANAHAN
SPARTANBURG
BLUFFTON
GOOSE CREEK
MYRTLE BEACH
COLUMBIA
98801 SEW CREATIVE/ADVANTAGE STORE 509-663-5516
99301 ARHA TOTAL SERVICE 509-547-3799
98225 JOHN WIGGINS DBA TWIN SISTER’S ELEC.360-676-1257
29406 BOBBY LUTES ELECTRICAL INC.
29306 BOBBY JACKSON ELECTR.
29910 J. HEAVENER & CO.
29445 DAVID MIMS
843-797-0948
803-583-6035
843-837-8300
843-514-2380
843-293-0068
803-781-3267
98675 S&L ELECTIRC
98902 INLAND LIGHTING
503-657-0633
509-248-4647
ISO
ISO
29575 RAY ELECTRIC
29212 EASTWIND ENTERPRISES
WASHINGTON, DC
WASHINGTON
20007 FAN FAIR
202-342-6290
SOUTH DAKOTA
SIOUX FALLS
SIOUX FALLS
57105 LAMPS AND SHADES INC.
57104 MAHLANDER’S
605-332-6680
605-336-7798
WEST VIRGINIA
SO. CHARLESTON
WHEELING
25309 PEPPER ELECTRIC
26003 TOP HAT STOVE SALES
304-768-8195
304-233-6262
TENNESSEE
MT CARMEL
MEMPHIS
LOUISVILLE
BRENTWOOD
37645 APPALACHIAN ELEC. SVC.
38111 APPLIANCE SERVICE CTR.
37777 BEN SNYDER
423-357-0783
901-324-5898
865-380-5491
ISO
ISO
WISCONSIN
MILWAUKEE
GREEN BAY
FONTANA
BROOKFIELD
MADISON
53219 BOB’S FAN REPAIR
54313 KARL DEVROY
53125 J&L PROPERTY MAINT.
53005 CITY LIGHTS & FANS
53719 MADISON LIGHTING
54601 WETTSTEIN’S
414-546-2501
920-494-6090
262-275-2345
414-781-9048
608-271-6911
608-784-5555
37027 PAUL TAMPIEN/SUNSHINE ELECT. 615-371-9383
ISO/OWTS
TEXAS
LEWISVILLE
HOUSTON
CORPUS CHRISTI
FREEPORT
AMARILLO
DENTON
ODESSA
DENTON
DAMON
KERRVILLE
PARIS
75067 SOUTHERN COMFORTS
77089 BENNETT FAN INSTALL., INC.
78404 BRAND APPLIANCE & MICROWAVE 512-854-1851
940-536-1406
281-484-1401
LA CROSSE
ISO
77541 SKIP’S ELECTRIC AND AIR
79106 DI’S LAMP & FAN REPAIR
76201 FANTASIA CEILING FANS
79761 GOFORTH ELECTRIC
76201 LARRY W. GOFF
77430 GULF COAST FAN SERVICE
78029 MAURICE HAMMIT
75460 HARGIS ELECTRIC
979-233-3903
806-331-5267
940-484-4222
432-550-8927
940-387-7304
281-495-6434
210-367-4937
903-785-8055
210-804-1362
CANADA
TORONTO, ONT.,
M6M2P5 ZANEEN LIGHTING
00805 DUANE LOBERG
416-247-922
809-775-2399
OVERSEAS
ST. THOMAS
SAN ANTONIO
78212 CEILING FAN SERVICE CTR.
PRODUCT SPECIFICATIONS
Collection:
Cosmopolitan
Finishes:
Oil-Rubbed Bronze
TM
Model Name:
Siena®
Motor:
188 x 25mm Direct Drive
Model Number: P5G73M
Dimensions:
NOTE: Dimension B
includes light fixture
and glass.
Blade Span:
Blade Iron Pitch:
No. of Blades:
Technology:
Lightbulbs:
54"
15°
A = 11"
B = 23"
C = 3"
D = 18"
E =5.6"
5
Versa•Touch II™ / W-73
(3) 40-watt A15, (3) 60-watt A15
Weight:
38 lbs.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|