Low Profile Integrated Kit
Installation Manual
99080
Compatible with:
2xxxx Types A - Z
51000-58999 fan series
59500-59999 fan series
Select Casablanca Fans
MA014-01 • 01/14/14
Download from Www.Somanuals.com. All Manuals Search And Download.
1.888.830.1326
WHICH ASSEMBLY METHOD WILL I USE?
Choose one of the four images below that most closely resembles the switch
housing on your fan; then follow the instructions under the image.
Switch
Housing
Screw
Switch
Housing
Cap
Switch
Housing
Cap
Cap
Screw
If your fan’s switch housing cap
If your fan’s switch housing cap resembles
this one, remove the whole switch
resembles this one, remove the cap
screws with a Phillips head screwdriver.
Then follow the TYPE-A ASSEMBLY
INSTRUCTIONS on pages 4-5.
housing by removing the switch housing
screws with a Phillips head screwdriver.
Remove the two cap screws from the
inside of the switch housing. Reinstall
the switch housing. Tighten the switch
housing screws. Then follow the TYPE-A
ASSEMBLY INSTRUCTIONS on pages 4-5.
Switch
Housing
Switch
Housing
Screw
Plug
Button
Plug
Screw
Button
If your fan’s switch housing cap
resembles this one, remove the whole
switch housing by removing the switch
housing screws with a Phillips head
screwdriver. Remove the plug button.
Then follow the TYPE-B ASSEMBLY
INSTRUCTIONS on pages 6-7.
If your fan’s switch housing cap resembles
this one, remove the whole switch
housing by removing the switch housing
screws with a Phillips head screwdriver.
Remove the plug button using a standard
screwdriver. Then follow the TYPE-C
ASSEMBLY INSTRUCTIONS on pages 8-9.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MA017-01 • 01/14/14
1.888.830.1326
TYPE-A ASSEMBLY INSTRUCTIONS
1
2
Wire
Connector
Switch
Housing
Mounting
Screw
Partially install the two mounting screws
into the bottom of the lower switch
housing.
If your fan does not have pin connectors
on the wires coming from the switch
housing, install the wiring harness
provided. Using the provided wire
connectors connect the white wire from
the fan to the white wire from the wire
harness and connect the black or blue
wire from the fan to the black wire from
the wire harness.
3
4
Keyhole
Slots
Mounting
Screw
Using the single pin connectors, connect
the black or blue wire from the fan to the
black wire from the light kit. Connect the
white wire from the fan to the white wire
from the light kit.
Lift the light kit up to meet the
lower switch housing. Wrap keyhole
slots around the screws and twist
counterclockwise. Tighten screws.
Do not allow the light kit to hang
only by the wire connections!
Download from Www.Somanuals.com. All Manuals Search And Download.
4
MA017-01 • 01/14/14
1.888.830.1326
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
5
6
Tab
Bulb
Indentation
Socket
Installing the bulbs - Install a bulb into each
of the sockets. When necessary, replace with
bulbs of same type and wattage.
Installing the globe (sold separately)-
Position the indentations in the outer rim of
the globe so that they line up with the tabs
on the inside surface of the light fixture rim.
Carefully lift the globe up inside the light
fixture as far as it will go. Rotate the globe in
a clockwise direction until it is held tightly
in place by the four tabs.
8
7
ON
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn power on. Your installation
is complete!
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MA017-01 • 01/14/14
1.888.830.1326
TYPE-B ASSEMBLY INSTRUCTIONS
1
2
Wire
Connector
Switch
Housing
If your fan does not have pin connectors on
the wires coming from the switch housing,
install the wiring harness provided. Using
the provided wire connectors connect the
white wire from the fan to the white wire
from the wire harness and connect the
black or blue wire from the fan to the black
wire from the wire harness.
Feed the wires through the center hole in
the switch housing, the washer, and the
nut. Install the switch housing by twisting
clockwise onto the threaded rod. Install
the washer and nut onto threaded rod and
tighten securely.
3
4
Switch
Housing
Screw
Using the single pin connectors, connect
the black or blue wire from the fan to
the black wire from the light kit. Connect
the white wire from the fan to the white
wire from the light kit.
Lift the light kit assembly up so that the
screw holes in the lower switch housing
line up with the holes in the upper switch
housing. Install the switch housing
screws and tighten securely.
Do not allow the light kit to hang
only by the wire connections!
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MA017-01 • 01/14/14
1.888.830.1326
TYPE-B ASSEMBLY INSTRUCTIONS (CONTINUED)
5
6
Tab
Bulb
Indentation
Socket
Installing the bulbs - Install a bulb into each
of the sockets. When necessary, replace with
bulbs of same type and wattage.
Installing the globe (sold separately)-
Position the indentations in the outer rim of
the globe so that they line up with the tabs
on the inside surface of the light fixture rim.
Carefully lift the globe up inside the light
fixture as far as it will go. Rotate the globe in
a clockwise direction until it is held tightly
in place by the four tabs.
7
8
ON
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn power on. Your installation
is complete!
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MA017-01 • 01/14/14
1.888.830.1326
TYPE-C ASSEMBLY INSTRUCTIONS
1
2
Switch
Housing
Wire
Connector
If your fan does not have pin connectors on
the wires coming from the switch housing,
install the wiring harness provided. Using
the provided wire connectors connect the
white wire from the fan to the white wire
from the wire harness and connect the
black or blue wire from the fan to the black
wire from the wire harness.
Feed the wires through the center hole in
the switch housing. Then using the single
pin connectors, connect the black or blue
wire from the fan to the black wire from
the light kit. Connect the white wire from
the fan to the white wire from the light kit.
3
4
Lower
Upper
Switch
Housing
Switch
Housing
Threaded
Rod
Switch
Housing
Screw
Lift the lower switch housing up so that the
screw holes line up with the holes in the
upper switch housing. Install the switch
housing screws and tighten securely.
Lift the light kit up, tucking the wires into
the hole in the switch housing. Install the
center stem of the light kit into the lower
switch housing by turning the threaded
rod clockwise into the threaded hole.
Continue turning until tight.
Do not allow the light kit to hang
only by the wire connections!
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MA017-01 • 01/14/14
1.888.830.1326
TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED)
5
6
Tab
Bulb
Indentation
Socket
Installing the bulbs - Install a bulb into each
of the sockets. When necessary, replace with
bulbs of same type and wattage.
Installing the globe (sold separately)-
Position the indentations in the outer rim of
the globe so that they line up with the tabs
on the inside surface of the light fixture rim.
Carefully lift the globe up inside the light
fixture as far as it will go. Rotate the globe in
a clockwise direction until it is held tightly
in place by the four tabs.
7
8
ON
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn power on. Your installation
is complete!
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MA017-01 • 01/14/14
1.888.830.1326
TROUBLESHOOTING
Lights don’t come on.
• Make sure that the bulbs are properly installed.
• Make sure power switch is on.
• Pull the pull chain to make sure it is on.
• Check the circuit breaker to ensure the power is turned on.
• Check the pin connections in the light kit.
• Refer to the fan manual for locating the fan’s wiring. Verify that the light and power
wires are correctly connected to the ceiling and the light kit.
ONE YEAR WARRANTY
This product is warranted to the original purchaser by Casablanca Fan Company/
Hunter Fan Company against defects in material and workmanship for one (1)
year from date of purchase. During the warranty period, we will repair or, at our
option, replace a defective product at no charge. For information on how to obtain
service, contact the Casablanca/Hunter Service Department by calling our toll-
free number at 888-830-1326. Damage to the product caused by mishandling,
improper installation or modification is not covered by this warranty. This warranty
is given in lieu of all other warranties expressed or implied. Some states do not allow
limitations of time on an implied warranty, therefore the above limitations may not
apply in every case. This warranty states specific legal rights which may vary from
state to state.
If you have problems installing or operating your light kit, do not return this product
to the dealer. Call our Consumer Affairs Hotline.
888-830-1326
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MA017-01 • 01/14/14
|