THE
2
1
0
1
-
C
S
VOLUNTEER
from
“The Remote Siren That Clears the Way”
The SC-1012 Volunteer 100-watt remote siren with light controls was designed with the volunteer firefight-
er in mind offering complete versatility. This unit gives you flexibility in the placement of the remote switch
panel and amplifier. The remote switch panel features two 3-position rocker switches to select between
wail, yelp, manual, and mechanical tone. A momentary rocker switch for air-horn and phaser with the
European HiLo/two-tone sound as an optional substitute. The siren also features the Horn Ring Cycler
(HRC2) function that enables the driver hands-free control of the siren by cycling through the tones with
the vehicles horn. Two lighted rocker switches are also included for controlling emergency lights..
The siren is LED backlit and is installed using heavy duty screw down terminals for power and detachable
connectors for the speaker and lights and remote switch panel. The amplifier and light controls are fused
separately on the back of the unit. The siren tones may be changed or disarmed using an internal Dip
switch. An output indicator light is on the face of the remote amplifier for diagnostic purposes. The light
controls are capable of switching up to 20 amps.This siren is designed to work with a 100-watt speaker
and ensures you the strength to get you where you need to go and be heard like one of the big fire trucks.
The remote panel may be mounted with holes in the top or bottom. As with all Carson Sirens products, the
SC-1012 Volunteer is backed by a no-hassle 5-year limited warranty.
The SC-1012 Volunteer Remote Siren offers the reliable performance, and rugged durability with consis-
tent quality that comes with every Carson Siren.
- Mechanical Tone: This sirens deep and gutsy mechanical tone allows you to sound just like a fire
truck clearing traffic. This siren will set you apart from the rest.
- Lighted Rocker Switches: Two lighted rocker switches for controlling auxiliary lighting.
- Output Diagnostic Indicator: Sensors at the siren output connector measure when the siren is
creating an output to the speaker on the face of the remote amplifier for diagnostic purposes. This pro-
vides the service person with the ability to determine if the problem is internal with the siren or external
with the wiring and speaker should the system fail to produce a warning signal.
- Horn Ring Cycler 2: Allow the operator the capability to run the siren tones from the vehicle horn
ring or other external switching for hands free tone selection during pursuit or rescue situations.
The SC-1000 Series offers
“a small siren with big results”.
Download from Www.Somanuals.com. All Manuals Search And Download.
|