Starter Guide
Before Using the Machine
1
2
3
Preface
P.5
Installing the Machine
P. 9
Installing the Drivers Software
P. 15
Appendix
Read this guide first.
Please read this guide before operating this
product.
After you finish reading this guide, store it in
a safe place for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
• Always grasp the power plug when unplugging the power plug. Do not
pull on the power cord, as this may expose the core wire of the power
cord or damage the cord insulation, causing electricity to leak, resulting
in a fire or electrical shock.
• The output slot is hot during and immediately after printing. Do not
touch the area surrounding the output slot, as this may result in burns.
• Printed paper may be hot immediately after being output. Be careful
when removing the paper and aligning the removed paper, especially
after continuous printing. Failure to do so may result in burns.
• When performing copy with a thick book placed on the platen glass, do
not press the platen glass forcefully. This may damage the platen glass
and cause personal injury.
• Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you may
be unable to unplug it in an emergency.
Handling
• Be careful not to drop a heavy object, such as a dictionary, on the platen
glass. This may damage the platen glass and cause personal injury.
• Close the platen glass gently so as not to catch your hand. This may
result in personal injury.
WARNING
• Do not disassemble or modify the machine. There are high-temperature
and high-voltage components inside the machine which may result in a
fire or electrical shock.
• The laser beam can be harmful to the human body. The laser beam is
confined in the laser scanner unit by a cover, so there is no danger of
the laser beam escaping during normal machine operation. Read the
following remarks and instructions for safety.
•
Electrical equipment can be hazardous if not used properly. Do not allow
children to touch the power cord, cables, internal gears, or electrical parts.
If the machine makes an unusual noise or emits smoke, heat, or an unusual
smell, immediately turn off the power switches of the machine and
computer and disconnect the interface cable if it is connected. Then, unplug
the power plug from the AC power outlet and contact your local authorized
Canon dealer. Continued use can result in a fire or electrical shock.
•
•
Never open covers other than those indicated in this manual.
Do not remove the caution label attached to the cover of the laser scanner unit.
•
• Do not use flammable sprays near the machine. If flammable substances
come into contact with electrical parts inside the machine, this may
result in a fire or electrical shock.
•
Always turn off the power switches of the machine and computer, and then
unplug the power plug and interface cables before moving the machine. Failure
to do so can damage the cables or cords, resulting in a fire or electrical shock.
•
If the laser beam should escape and enter your eyes, exposure may cause
damage to your eyes.
• Confirm that the power plug or power connector is inserted completely after
moving the machine. Failure to do so can result in an overheating and fire.
• Do not drop paper clips, staples, or other metal objects inside the
machine. Also, do not spill water, liquids, or other flammable substances
(alcohol, benzene, paint thinner, etc.) inside the machine. If these items
come into contact with a high-voltage area inside the machine, this
may result in a fire or electrical shock. If these items are dropped or
spilled inside the machine, immediately turn off the power switches of
the machine and computer and disconnect the interface cable if it is
connected. Then, unplug the power plug from the AC power outlet and
contact your local authorized Canon dealer.
• If you operate this machine in manners other than the control,
adjustment, and operating procedures prescribed in this manual, this
may result in hazardous radiation exposure.
•
This machine is confirmed as the class 1 laser product in IEC60825-1:2007.
Maintenance and Inspections
• When cleaning the machine, turn off the machine and computer, and
unplug the interface cables and power plug. Failure to do so can result in
a fire or electrical shock.
• When plugging or unplugging a USB cable when the power plug is
plugged into an AC power outlet, do not touch the metal part of the
connector, as this can result in electrical shock.
• Unplug the power plug from the AC power outlet periodically and clean
the area around the base of the power plug’s metal pins and the AC
power outlet with a dry cloth to remove all dust and grime. In damp,
dusty, or smoky locations, dust can build up around the power plug and
become damp, which can cause a short circuit, resulting in a fire.
• Clean the machine with a well wrung out cloth dampened with water or
mild detergent diluted with water. Do not use alcohol, benzene, paint
thinner, or other flammable substances. If flammable substances come
into contact with electrical parts inside the machine, this may result in a
fire or electrical shock.
CAUTION
• Do not place heavy objects on the machine. The object or the machine
may fall, resulting in personal injury.
• Turn off the power switch when the machine will not be used for a long
period of time, such as overnight. Turn off the machine and unplug the
power plug if the machine will not be used for an extended period of
time, such as for several days.
• Some areas inside the machine are subject to high voltage. When
removing jammed paper or when inspecting inside of the machine, be
careful not to allow necklaces, bracelets, or other metal objects to touch
the inside of the machine, as this can result in burns or electrical shock.
• Open or close covers and install or remove cassettes gently and carefully.
Be careful not to hurt your fingers.
• Keep your hands and clothing away from the roller in the output area.
Even if the machine is not printing, the roller may suddenly rotate and
catch your hands or clothing, resulting in personal injury.
•
Do not dispose of used toner cartridges in open flames. This may cause the
toner remaining inside the cartridges to ignite, resulting in burns or fire.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
• Confirm that the power plug or power connector is inserted completely after
cleaning the machine. Failure to do so can result in an overheating and fire.
• If you accidentally spill or scatter toner, carefully gather the toner particles together
or wipe them up with a soft, damp cloth in a way that prevents inhalation.
Never use a vacuum cleaner that does not have safeguards against dust
explosions to clean up spilled toner. Doing so may cause a malfunction in
the vacuum cleaner, or result in a dust explosion due to static discharge.
• Check the power cord and plug regularly.The following conditions may result in
fire, so please contact your local authorized Canon dealer or the Canon help line.
• There are burn marks on the power plug.
• When loading paper or removing jammed paper, be careful not to cut
your hands with the edges of the paper.
• When removing a toner cartridge, remove the toner cartridge carefully
so as to prevent the toner from scattering and getting into your eyes or
mouth. If toner gets into your eyes or mouth, wash them immediately
with cold water and consult a physician.
• Do not attempt to disassemble the toner cartridge. The toner may scatter
and get into your eyes or mouth. If toner gets into your eyes or mouth,
wash them immediately with cold water and consult a physician.
• If toner leaks from the toner cartridge, be careful not to inhale the toner
or allow it to come into direct contact with your skin. If the toner comes
into contact with your skin, wash with soap. If the skin becomes irritated
or you inhale the toner, consult a physician immediately.
•
•
•
•
The blade on the power plug is deformed or broken.
The power is turned OFF or ON when bending the power cord.
The coating of the power cord is damaged, cracked, or dented.
A part of the power cord becomes hot.
• Check regularly that the power cord and plug are not handled in the
following manner. Failure to do so can result in a fire or electrical shock.
Consumables
WARNING
•
•
•
•
•
•
The power connector is loosened.
Stress is being applied to the power cord by a heavy object or by fixing it with staples.
The power plug is loosened.
The power cord is tied in a bundle.
A part of the power cord is put in an aisle.
The power cord is put in front of the heating appliance.
• Do not dispose of used toner cartridges in open flames. This may cause
the toner to ignite, resulting in burns or fire.
•
Do not store toner cartridges or paper in a location exposed to open flames.
This may cause the toner or paper to ignite, resulting in burns or fire.
CAUTION
• The fixing unit and its surroundings inside the machine become hot
during use. When removing jammed paper or when inspecting the
inside of the machine, do not touch the fixing unit and its surroundings,
as this may result in burns.
• When disposing of a toner cartridge, place the toner cartridge into a
bag to prevent the toner from scattering, and then dispose of the toner
cartridge according to local regulations.
• If you accidentally spill or scatter toner, carefully gather the toner
particles together or wipe them up with a soft, damp cloth in a way that
prevents inhalation.
Never use a vacuum cleaner that does not have safeguards against dust
explosions to clean up spilled toner. Doing so may cause a malfunction in
the vacuum cleaner, or result in a dust explosion due to static discharge.
CAUTION
• Keep the toner cartridges and other consumables out of the reach
of small children. If the toner or other parts are ingested, consult a
physician immediately.
• Do not attempt to disassemble the toner cartridge. The toner may scatter
and get into your eyes or mouth. If toner gets into your eyes or mouth,
wash them immediately with cold water and consult a physician.
• If toner leaks from the toner cartridge, be careful not to inhale the toner
or allow it to come into direct contact with your skin. If the toner comes
into contact with your skin, wash with soap. If the skin becomes irritated
or you inhale the toner, consult a physician immediately.
• When removing jammed paper or when inspecting the inside of the
machine, do not expose yourself to the heat emitted from the fixing unit
and its surroundings for a prolonged period of time. Doing so may result
in low temperature burns, even though you did not touch the fixing unit
and its surroundings directly, as this may result in burns.
• Do not pull out the sealing tape forcefully or stop at midpoint, as this
may cause toner to spill out. If toner gets into your eyes or mouth, wash
them immediately with cold water and consult a physician.
•
If paper is jammed, remove the jammed paper so that any pieces of paper
do not remain inside the machine. Also, do not put your hand in an area
other than indicated areas, as this may result in personal injuries or burns.
• When removing jammed paper or replacing a toner cartridge, be careful
not to get any toner on your hands or clothing, as this will dirty your
hands or clothing. If toner gets on your hands or clothing, wash them
immediately with cold water. Washing with warm water sets the toner,
making it impossible to remove the toner stains.
Others
WARNING
• If you are using a cardiac pacemaker
This machine generates a low level magnetic field. If you use a cardiac
pacemaker and feel abnormalities, please move away from this machine
and consult your physician immediately.
• When removing jammed paper, be careful not to allow the toner on the
paper to scatter. The toner may get into your eyes or mouth. If toner gets
into your eyes or mouth, wash them immediately with cold water and
consult a physician.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
Legal Notices
(8) You are not entitled to remove or make separate copies of the
SOFTWARE from the PRODUCT.
International ENERGY STAR Program
(9) The human-readable portion (the source code) of the
SOFTWARE is not licensed to you.
As an ENERGY STAR? Partner, Canon U.S.A., Inc.
has determined that this product meets the
ENERGY STAR Program for energy efficiency.
The International ENERGY STAR O ffice
Equipment Program is an international program
that promotes energy saving through the use of
computers and other office equipment.
The program backs the development and
dissemination of products with functions that
effectively reduce energy consumption. It is an
open system in which business proprietors can
participate voluntarily.
ACCEPTANCE
THE TERMS OF THIS THIRD PARTY SOFTWARE STATED HERE OR IN
RELATED WARRANTY PROVISIONS SHALL BE DEEMED ACCEPTED
UPON YOUR USE OF THE PRODUCT FOR ONE OR MORE OF ITS
NORMAL PURPOSES, IF THERE HAS BEEN NO OTHER PRIOR
EXPRESS ACCEPTANCE.
THE TERMS OF THIS THIRD PARTY SOFTWARE GOVERN THE
THIRD PARTY SOFTWARE AS DELIVERED WITH THE PRODUCT
AND ALL UPDATED VERSIONS OF THE THIRD PARTY SOFTWARE
PROVIDED UNDER MAINTENANCE AGREEMENTS OR OTHER
SERVICE ARRANGEMENTS FOR THE PRODUCT WITH CANON USA
OR CANON CANADA OR THEIR RESPECTIVE AUTHORIZED SERVICE
ORGANIZATIONS.
The targeted products are office equipment,
such as computers, displays, printers, facsimiles,
and copiers. The standards and logos are
uniform among participating nations.
Third Party Software
Legal Limitations on the Usage of Your Product and the
Use of Images
This Canon product (the “PRODUCT”) includes third-party
software modules. Use and distribution of these software modules
(the “SOFTWARE”) are subject to the conditions below.
Using your product to scan, print or otherwise reproduce certain
documents, and the use of such images as scanned, printed or
otherwise reproduced by your product, may be prohibited by law
and may result in criminal and/or civil liability.
A non-exhaustive list of these documents is set forth below. This
list is intended to be a guide only. If you are uncertain about
the legality of using your product to scan, print or otherwise
reproduce any particular document, and/or of the use of the
images scanned, printed or otherwise reproduced, you should
consult in advance with your legal advisor for guidance.
• Paper Money
(1) You agree that you will comply with any applicable export
control laws, restrictions or regulations of the countries
involved in the event that this product including the
SOFTWARE is shipped, transferred or exported into any
country.
(2) Rights holders of the SOFTWARE retain in all respects the
title, ownership and intellectual property rights in and to the
SOFTWARE. Except as expressly provided herein, no license
or right, expressed or implied, is hereby conveyed or granted
by rights holders of the SOFTWARE to you for any intellectual
property of rights holders of the SOFTWARE.
• Money Orders
• Certificates of Deposit
• Postage Stamps (canceled or uncanceled)
• Identifying Badges or Insignias
(3) You may use the SOFTWARE solely for use with the PRODUCT.
(4) You may not assign, sublicense, market, distribute, or transfer
the SOFTWARE to any third party without prior written
consent of rights holders of the SOFTWARE.
• Selective Service or Draft Papers
(5) Notwithstanding the foregoing, you may transfer the
SOFTWARE only when (a) you assign to a transferee all of your
rights to the PRODUCT and all rights and obligations under
the conditions governing the SOFTWARE and PRODUCT and
(b) such transferee agrees in writing to be bound by all these
conditions.
• Checks or Drafts Issued by Governmental Agencies
• Motor Vehicle Licenses and Certificates of Title
• Travelers Checks
• Food Stamps
• Passports
• Immigration Papers
(6) You may not decrypt, decompile, reverse engineer,
disassemble or otherwise reduce the code of the SOFTWARE
to human readable form.
(7) You may not modify, adapt, translate, rent, lease or loan
the SOFTWARE or create derivative works based on the
SOFTWARE.
• Internal Revenue Stamps (canceled or uncanceled)
• Bonds or Other Certificates of Indebtedness
• Stock Certificates
• Copyrighted Works/Works of Art without Permission of
Copyright Owner
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• Reorient or relocate the receiving antenna.
FCC (Federal Communications Commission)
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
imageCLASS MF3010: F162100
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in
Subpart B of Part 15 of the FCC Rules. Do not make any changes or
modifications to the equipment unless otherwise specified in this
manual. If you make such changes or modifications, you could be
required to stop operation of the equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
Canon U.S.A., Inc.
One Canon Park, Melville, NY 11747, U.S.A.
TEL No. 1-800-OK-CANON
Laser Safety
This machine complies with 21 CFR Chapter 1 Subchapter J as
a Class 1 laser product under the U.S. Department of Health
and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of
1968. This means that the machine does not produce hazardous
radiation.
CAUTION
Use of controls, adjustments, or performance of procedures
other than those specified in this manual may result in hazardous
radiation exposure.
The label is attached to the laser scanner machine inside the
machine and is not in a user access area.
Since radiation emitted inside the machine is completely confined
within protective housings and external covers, the laser beam
cannot escape from the machine during any phase of user
operation.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the
U.S. Food and Drug Administration implemented regulations
for laser products on August 2, 1976. These regulations apply to
laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
Setting Up the Machine to Suit Your Needs
Determine which machine functions (Copy, Print, Scan) you intend to use, and make settings according to the flowchart
below.
Start settings.
Required Operations
Print
Scan
Copy
Settings in a Computer
For Windows
For Macintosh
Settings are now complete.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Supplied Accessories
If an item is missing or damaged, please contact our Canon
Authorized Service Facilities or the Canon Customer Care
Center.
Confirm that all the supplied
accessories are contained in the box.
1.
The machine unit
The toner cartridge is
already installed.
Q
G
MF3010
u
u
ic
id
k
e
R
e
xxxxxxx
xxxxxxxxxx
RT
Density
A
ST
fe
OU
Y
r
xxx
xxxxxx
xxxxxx
RE
e
n
E
FO
c
B
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxx
xxxxxxxxx
e
y
n
t
i
t
u
a
y
q
c
o
p
h
e
t
t
S
e
first.
xxxxxxxxxxx
ID Card Copy
xxxxxx
xxxxxxxxxx
xxxx
xxxxxxxx
e
x
xx
xx
xx
xxx
Toner cartridge
xx
xx
xx
xx
Quick Reference Guide
Basic Copying Method
xx
xxxxxxxxxxxxx
xxxxxxxxx
xx
xxxxxxxxxx
xxxxxx
xxxx
xxxxxxxxxxx
xxxxxxxxxxx
xxx
xxxxxx
2
on
1
xxxx
xxxxx
xxxxxxxx
xxxxxx
et
Res
/
Stop
xxxxxxxxxxxxx
xxxxxxxx
xxxxxxx
xxxxxxxxxx
xxxxxxxx
xxxxxxx
xxxxxxx
Copy Ratio
Copy Quantity Re
xxxxxxxxxxxxxx
xxxxxxxxxxxx
xxxxxxxxxx
xxxxx
xxxxxxxxxxx
Place this guide near the
printer for effective usage.
gistration
xxxxxxxxx
xxxxxxxxxxxx
xxxxxxxxxxxx
e-Manual
Power cord
Quick Reference Guide Seal
Limited Warranty Notice
Starter Guide (This manual)
User Software CD-ROM
Supplied Toner Cartridge
The average yield of the included toner cartridge is as follows.
Canon Cartridge 125 Starter
Average yield*1: 700 sheets
*1
The average yield is on the basis of "ISO/IEC 19752"*2 when printing A4 size paper with the default print density setting.
*2
"ISO/IEC 19752" is the global standard relating to "Method for the determination of toner cartridge yield for monochromatic electrophotographic
printers and multi-function devices that contain printer components" issued by ISO (International Organization for Standardization).
The average yield of the replacement toner cartridge differs from which of the supplied toner cartridge.
To purchase replacement toner cartridges, see "About Replacement Toner Cartridges" in the e-Manual.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
User Software CD-ROM
About the Drivers and Software
The drivers and software included in the CD-ROM supplied with this machine are as follows.
MF Drivers
Printer driver
You can print from an application using the machine by installing the printer driver on your
computer. You can process print data at high speed by compressing the print data using the
computer's processing capabilities.
Scanner driver
You can use the machine as a scanner if you install the scanner driver on your computer.
MF Toolbox
MF Toolbox
MF Toolbox is a program which allows you to easily open an image scanned by the scanner in an
application, attach the scanned image to an e-mail, and store the scanned image in a hard disk.
Additional Software Programs
Presto! PageManager This is software for managing scanned images.
Supported Operating Systems
: available
: not available
Mac OS X
(version 10.5.8 or later)
Windows XP
Windows Vista/7/8
Printer driver
Scanner driver
MF Toolbox
Presto! PageManager
7
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Supplied Manuals
Starter Guide
This manual
Read this manual first.
• Preface
• Installing the Machine
This manual describes the settings for
setting up the machine and installing
the software. Be sure to read this
manual before using the machine.
• Connecting to a Computer and Installing the Drivers
• Appendix
Quick Reference Guide
Read this manual next.
This manual describes the basic use of
the machine.
Place this guide near the printer for
effective usage.
• Description of Various Copy
• Quantity Settings
Q
G
MF3010
u
u
ic
id
k
e
R
e
Density
xxxxxxxxxxx
xxxx
xxxx
ST
A
RT
xxxxxxxxxxx
xxxx
fe
OU
Y
r
RE
e
n
E
FO
c
B
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxx
xxxxxxxxxxx
e
i
t
y
a
n
t
q
u
y
c
e
o
p
t
t
h
S
e
first.
xxxxxxxxxxx
ID Card Copy
xxxxxx
xxxxxxx
xxxxxxxxx
xxxx
G
xx
xx
xx
• Operating Procedures
• If a Paper Jam Has Occurred
• Cover Open/Service Error
• No Paper
xx
xx
xx
xx
xx
xx
Basic Copying Method
xx
xxxxxxxxxxxxx
xxxxxxxxx
x
xxxxxxx
xxxx
xxxx
xxxxxxxxxxx
xxxxxxxxxxx
xxxxxxxxxxx
xxxxxx
2
on
1
x
xxxxxxx
xxxxxxxxx
xxxx
et
Res
/
Stop
xxxxxxxxxxxxx
xxxxx
xxxxx
xxxxx
x
xxxxxxxxxxx
xxxx
Copy Ratio
Copy Quantity Re
xxxxxxxxxxxxxx
xxxxxxxxxxx
xxxxxxx
xxxxxxxxx
xxxx
gistration
xxxxxxxxxxx
xxxxxxxxxxxxxx
xxxxxxxxxxx
e-Manual
e-Manual
*
The e-Manual is included in the User Software CD-ROM.
*
If you are using Macintosh, see the
following Driver Guides or Help for more
details on these functions.
You can find the driver guides in the
following locations on the User Software
CD-ROM.
• Important Safety
Instructions
Read the desired chapter
to suit your needs.
The e-Manual is categorized by subject to
find desired information easily.
For details about using the e-Manual, refer
to “Using the e-Manual“ in “Others.”
• Basic Operation
• Copy
• Print*
•
Canon UFR II Printer Driver Installation
Guide → [Documents] → [Print] →
[Guide] → [index.html]
Canon Scanner Driver Guide →
[Documents] → [Scan] → [Guide] →
[index.html]
• Scan*
• Troubleshooting
• Maintenance
• Specifications
•
Determining the Installation Site
24 7/8” (632 mm)
4”
4”
(100 mm)
(100 mm)
4”
(100 mm)
4”
(100 mm)
22 1/2”
(572 mm)
24”
(608 mm)
Paper
cassette
4”
(100 mm)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
Carrying the Machine to the Installation Site
and Removing the Packing Materials
Carry the machine to the installation site.
1.
2.
Hold the grips.
Carry the machine.
*
The packing materials may be changed in form or placement, or may be added or
removed without notice.
Remove the packing materials.
Remove the tape that is
Remove the packing materials.
attached to the paper (the
paper describes precautions).
Check!
Did you remove all the
packing materials?
Tape
Protective sheet x3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the Toner Cartridges
Lift the scanning platform.
1.
Hold the operation panel.
Lift the scanning platform.
If you cannot lift the scanning
platform
Make sure that the platen glass is
completely closed.
Do not try to forcefully lift the
scanning platform as this may
damage the machine.
Open the toner cover.
2.
Hold the grip on the left front side of toner cover.
Open the toner cover.
Remove the packing materials from the toner cartridge, and then
distribute the toner.
3.
Turn the sheet to the back.
Remove the packing material.
Remove the toner cartridge.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
Remove the packing material.
Shake five to six times.
Remove the packing material.
Insert the toner cartridge.
Lift the tab.
Fit the protrusions on each side of the toner cartridge into the guides
located on each side of the machine, and then slide the toner cartridge
into the machine.
Place the toner cartridge on a flat surface,
and then lift the tab.
Protrusion
Protrusion
Pull the sealing tape completely out.
The full length of the sealing tape is
approximately 19 3/4”(50 cm).
Check!
Did you remove all the packing materials?
Packing materials x2
Sealing tape x1
Packing material with a sheet x1
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Close the toner cover, and then lower the scanning platform.
4.
Lower the scanning platform.
Close the toner cover.
Loading Paper
Open the paper cassette.
1.
2.
Load the paper, and then adjust the paper guides.
Spread the paper guides.
Load the paper.
Spread the paper guides a little
Load the paper until the edge of the paper stack meets the back of the
paper cassette.
wider than the paper size.
Load limit guide
Check!
Ensure that the
paper stack does not
exceed the load limit
guides.
When changing the size of the paper
to be loaded
Be sure to set the paper size.
When using envelopes
For details on how to load
media, see “e-Manual.”
12
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
Slide the paper guides to the
paper width without space.
Slide the paper guide to the rear
edge of the paper without space.
Additional preparations for printing
Lift the paper stopper.
Push the protrusion.
Pull out the output tray extension.
Connecting the Power Cord
Ensure that the machine is off.
Plug the power plug into the
power socket.
Plug the power plug into a AC
power outlet.
OFF
Do not connect the USB cable. Connect the USB cable when installing the software.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn ON the machine
Turn ON the machine.
1.
ON
Setting a Paper Type
Press [
] (Menu setting
Press [ ] or [ ] until
“P”is displayed.
Press [
], and set the menu to
key), and then start the menu
operation.
be able to change the settings.
Press [
the setting.
] to confirm
Press [ ] or [ ] to change
the setting values.
Check!
The display and the paper types
are matched as follows.
Display
Paper type
Plain paper
1
+1
2
Plain paper L
Heavy paper 1
Heavy paper 2
Rough paper
Envelopes
+2
3
Press [
] (Menu setting key)
4
to exit the menu operation.
5
Transparencies
Labels
6
14
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
Installing the Drivers Software (For Windows)
•Connect the USB cable after installing the software.
•Ensure that the power of the machine is turned on when connecting the USB cable.
Turn on the computer, and then log on as a user with
administrative privileges.
If you have already logged on, exit all applications which are running.
1.
Install the MF Drivers and MF Toolbox.
2.
[Easy Installation] performs the installation of the
following software.
• Printer driver
• Scanner driver
• MF Toolbox
Insert the CD-ROM.
Click.
To add the following software and manual to the
installation, select [Custom Installation].
• Presto! PageManager
• e-Manual
e-Manual "Installing the MF Drivers and MF Toolbox"
Read the contents of the License
Agreement.
If the top screen does not appear
• Windows XP
1. From the [Start] menu, select [Run].
2. Enter "D:\MInst.exe", and then click [OK].
• Windows Vista and 7
1. Enter "D:\MInst.exe" in [Start Search] or
[Search programs and files] under the [Start]
menu.
2. Press the [ENTER] key on the keyboard.
• Windows 8
1. Right-click the lower-left corner of the screen
and select [Run].
Click.
2. Enter "D:\MInst.exe", and then click [OK].
*
The CD-ROM drive name is indicated as "D:" in this
manual. The CD-ROM drive name may differ depending
on the computer you are using.
Click.
Next, installation of
MF Toolbox starts.
Click.
Click.
Click.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
If you select [Accept]:
The Product Extended Survey Program (the
program to investigate the state of usage)
will be installed.
The Product Extended Survey Program
is the program to send the information
related to the usage of this machine to
Canon every month for ten years. Any
other information including your personal
information is not sent.
Click.
Select.
Click.
Select the check box.
Ensure that [
] is added.
The CD-ROM may be removed
once this screen appears.
Click.
Click.
Connect the USB cable.
3.
(B)
Remove cap plug.
Connect the cable.
Remove by pulling the string.
• Flat end (A):
Connect to the USB port
on the computer.
• Square end (B):
Connect to the USB port
on the machine.
(A)
When a dialog box is displayed
Follow the on-screen instructions and complete the installation.
Checking the Installation Results
P. 17
16
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
Checking the Installation Results
Ensure that the MF Drivers and MF Toolbox are installed correctly.
Ensure that the icons for the installed software are added as follows.
Software
Location
Icon
Printer folder
•Windows XP Professional
From the [Start] menu, select [Printers and Faxes].
•Windows XP Home Edition
From the [Start] menu, select [Control Panel], click [Printers and Other
Hardware] → [Printers and Faxes].
Printer driver
•Windows Vista
From the [Start] menu, select [Control Panel], and then click [Printers].
•Windows 7
From the [Start] menu, select [Devices and Printers].
•Windows 8
Right-click the lower-left corner of the screen, select [Control Panel], and
then click [View devices and printers].
[Scanners and Cameras] or [Scanners and Cameras Properties] folder
•Windows XP
From the [Start] menu, select [Control Panel], and then click [Printers and
Other Hardware] → [Scanners and Cameras].
•Windows Vista
From the [Start] menu, select [Control Panel], and then click [Hardware and
Sound] → [Scanners and Cameras].
Scanner driver
•Windows 7
1. Enter "scanner" in [Search programs and files] under the [Start] menu.
2. Click [View scanners and cameras].
•Windows 8
1. Right-click the lower-left corner of the screen and click [Control Panel].
2. Enter "scanner" in [Search Control Panel] on the upper-right corner of the
window.
3. Click [View scanners and cameras].
Desktop
MF Toolbox
How to Use the Online Help
In the Online Help, all the functions of the driver software and information about options are included. If you want to
view descriptions of the functions and settings immediately when using the driver software, make use of the Online
Help.
How to display (1) Select [File] → [Print] from the menu bar in the
the Help
application.
screen
(2) Select the printer in [Select Printer] or [Name] in the
[Print] dialog box.
(3) Click [Preferences] or [Properties].
(4) Click [Help] in the [Properties] dialog box.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Software
(For Macintosh)
••Connect the USB cable after installing the software.
••The installation screen varies depending on the version of MAC OS X.
Close all applications
that are running.
Insert the CD-ROM.
Click.
*
You cannot change
the installation
location. Click
[Continue].
Double-click the CD-ROM icon.
Double-click.
Depending on the system environment, the
[Select a Destination] dialog box may not be
displayed. In this case, skip to step
.
Click.
*
[Change Install
Location] button
may appear, but you
cannot change the
installation location.
Click.
Read the contents of the License Agreement.
Enter.
Click.
*
If you are using
Mac OS X 10.7.x,
click [Install
Software].
Depending on the system environment, the
[Authenticate] dialog box may not be displayed.
In this case, skip to step
.
Click.
Click.
Click.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
(For Macintosh)
Connecting a USB Cable
••Perform the following procedure only when connecting this machine to Macintosh with a USB cable.
Remove the cap plug.
Connect the cable.
• Flat end (A): Connect to the USB port on the computer.
• Square end (B): Connect to the USB port on the machine.
Remove by pulling the string.
(B)
(A)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
(For Macintosh)
Registering the Printer
Register the printer following the procedure from
to
.
Open [System Preferences].
Click [Print & Fax] or
[Print & Scan].
Click the [+] icon.
If you are using Mac OS X 10.7.x, and there are
shared printers on the network, click [+] and select
[Add Other Printer or Scanner].
Select.
Click.
Select.
Select a printer name for which [USB] is
displayed in the [Kind] or [Connection] column.
Select.
If you are using Mac OS X 10.6 or later, select
[Select Printer Software] from [Print Using].
Check that this machine is
added to the [Print & Fax] or
[Print & Scan] dialog box.
Click.
Select a driver.
Printer driver:
Canon MF3010 (US)
If the following screen appears, specify the
optional settings, and then click [Continue].
If you are using Mac OS X 10.6.x,
Mac OS X 10.7.x or Mac OS X
10.8.x, select the corresponding
driver from the separate dialog
box, and then click [OK].
(For Macintosh)
Checking the Installation Results
With this section, check that the scanner driver is installed correctly.
• You do not need to check the installation results of the printer driver.
You can use the drivers when the registration of this machine is completed.
The computer is connected with the scanner.
Open the Image Capture application of your Mac OS X.
When [Canon MF3010 USB] appears in the following locations, the installation of the driver was successful.
•Mac OS X 10.5.x
•TMhaecpOuSllX-d1o0w.6nomr elantuerdisplayed by clicking [Devices] in the menu bar.
The left list in the window
20
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
Using the e-Manual
Page configuration of the e-Manual
When you start the e-Manual, the screen below is displayed.
Click to refer to the contents, glossary,
and how to use the e-Manual.
Enter a keyword which you want to
search, and then click the right button.
Click to view precautions
when using Macintosh.
Click a button for the
function which you want to
use or desired information.
Click to see Using the
Quick Reference Guide.
Click when performing troubleshooting or maintenance of the machine.
Installing the e-Manual on your computer
Insert the User Software CD-ROM in your computer.
If the top screen does not appear
Click [Custom Installation].
If CD-ROM Setup does not appear, see "If the top
screen does not appear."
• Windows XP
1. From the [Start] menu, select [Run].
2. Enter "D:\Minst.exe", and then click [OK].
• Windows Vista and 7
1. Enter "D:\Minst.exe " in [Start Search] or [Search programs and files]
under the [Start] menu.
Select only the [Manuals] check box.
Click [Install].
2. Press the [ENTER] key on the keyboard.
The CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive
*
name may differ depending on the computer you are using.
Click [Yes].
• Windows 8
Click [Exit].
1. Right-click the lower-left corner of the screen and select [Run].
2. Enter "D:\MInst.exe", and then click [OK].
Click [Next].
When the installation finished, click [Exit].
To display the e-Manual, double-click the short cut icon [MF3010 e-Manual] on the desktop.
*
ActiveX may block pop-ups in the background. If the
e-Manual is not displayed properly, look for an information
bar at the top of the page and click the information bar.
Displaying the e-Manual directly from the CD-ROM
Insert the User Software CD-ROM in your computer.
Click [Manuals].
Click [e-Manual].
*
Depending on the operating system you are using, a security protection message is displayed.
Allow the contents to be displayed.
A-1
Download from Www.Somanuals.com. All Manuals Search And Download.
For Macintosh
Installing the e-Manual on your computer
Insert the User Software CD-ROM in your computer.
Open the [Documents] folder.
Drag and drop the [MF Guide] folder into a location where you want to save it.
When displaying the installed e-Manual, double-click [index.html] in the saved [MF Guide] folder.
Displaying the e-Manual directly from the CD-ROM
Insert the User Software CD-ROM in your computer.
Open the [Documents] → [MF Guide] folders.
Double-click [index.html].
For more details on the print and scan functions
See the following Driver Guides or Help.
You can find the driver guides in the following locations on the User Software CD-ROM.
••Canon UFR II Printer Driver Installation Guide:
User Software CD-ROM → [Documents] → [Print] → [Guide] → [index.html]
••Canon Scanner Driver Guide:
User Software CD-ROM → [Documents] → [Scan] → [Guide] → [index.html]
A-2
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
If You Want to Uninstall the Installed Software
If you do not need the printer driver, scanner driver, or MF Toolbox, you can uninstall them with the following procedure.
Confirm the following points.
1.
• You must be have administrative privileges on the computer
• You should have the installation software (in case you want to re-install the drivers)
• You have closed all applications on your computer
Delete the software.
2.
For the printer/scanner driver
Open [Programs and Features].
•Windows XP
From the [Start] menu, select [Control Panel], and then double-click [Add or Remove Programs].
•Windows Vista/7
1. From the [Start] menu, select [Control Panel].
2. Click [Uninstall a Program] or double-click [Programs and Features].
•Windows 8
Right-click the lower-left corner of the screen and select [Programs and Features].
Select [Canon MF3010], and then click [Uninstall/Change].
Click.
Click.
Click.
For MF Toolbox
Open [Programs and Features].
•Windows XP
From the [Start] menu, select [Control Panel], and then double-
click [Add or Remove Programs].
•Windows Vista/7
1. From the [Start] menu, select [Control Panel].
2. Click [Uninstall a Program] or double-click [Programs and
Features].
•Windows 8
Right-click the lower-left corner of the screen and select
[Programs and Features].
Select [Canon MF Toolbox 4.9], and then click [Uninstall].
Click.
Click.
For Product Extended Survey Program
Open [Programs and Features].
•Windows XP
From the [Start] menu, select [Control Panel], and then double-click [Add or Remove Programs].
•Windows Vista/7
1. From the [Start] menu, select [Control Panel].
2. Click [Uninstall a Program] or double-click [Programs and Features].
•Windows 8
Right-click the lower-left corner of the screen and select [Programs and Features].
Select [Canon Laser Printer/Scanner/Fax Extended Survey Program], and then click [Uninstall].
Follow the on-screen instructions.
A-3
Download from Www.Somanuals.com. All Manuals Search And Download.
For Macintosh
If the machine is connected to a computer with a USB cable, disconnect the USB cable.
If you want to delete the Scanner Driver or MF Toolbox, proceed to step
.
Open [System Preferences], and then click
[Print & Fax] or [Print & Scan].
Select the machine, and then click the [-] icon.
Delete all print queues
set from this driver.
Start the Mac OS X Finder.
From the menu bar, click [Go] → [Go to Folder].
Enter the location of the folder below, click [Go], and then delete a file or folder.
Drag a file or folder to [Trash] icon on the Dock to delete.
If [Authenticate] dialog box appears, enter the administrator’s name and password, and then click [OK].
Software
Location of the folder to enter
Name of the file or folder to delete
CUPSCMFP
/Library/Printers/Canon/
Printer Driver
/Library/LaunchAgents/
jp.co.canon.CUPSCMFP.BG.plist
CNMCMF3010ZUS.ppd.gz
MF Toolbox
/Library/Printers/PPDs/Contents/Resources/
/Applications/Canon MF Utilities/
/Library/Application Support/Canon/
/Library/Application Support/Canon/
/Library/Application Support/Canon/
/Library/Image Capture/Devices/*
ScanGear MF
WMCLibrary.framework
WMCReg.plist
Scanner Driver /
MF Toolbox
Canon MFScanner.app*
Canon XXX USB.ds
(XXX may differ depending on the model.)
/Library/Image Capture/TWAIN Data Sources/
/Library/LaunchAgents/
jp.co.canon.ScanGearMF.appl.Canon-MF-
Scan-Agent.plist
*
Mac OS X 10.6 or later.
Close all windows open.
Restart the computer.
A-4
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
Connecting to a Computer and
Installing the Drivers
Before Using the Machine
Preface
Installing the Machine
Appendix
Contacting the Service Center
When you have a problem with your machine and you cannot solve it even if you refer to the manuals or online help,
please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at 1-800-OK-CANON
between the hours of 8:00 A.M. to 8:00 P.M. EST for U.S.A. and 9:00 A.M. to 8:00 P.M. EST for Canada Monday through
through Friday from 9:00 A.M. to 8:00 P.M. EST
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED,
EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT
BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES
RESULTING FROM THE USE OF THIS MATERIAL.
Copyright
© 2013 by Canon Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into
any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual, or otherwise, without the prior written permission of Canon Inc.
Trademarks
Canon, the Canon logo, and imageCLASS are registered trademarks of Canon Inc. in the United States and may also be
trademarks or registered trademarks in other countries.
Apple, Mac OS, and Macintosh are trademarks or registered trademarks of Apple Inc. in the U.S. and/or other countries.
Microsoft, Windows, Windows Vista and Windows Server are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
All other product and brand names are registered trademarks, trademarks or service marks of their respective owners.
A-5
Download from Www.Somanuals.com. All Manuals Search And Download.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Replacement Toner Cartridges
Model name
MF3010
Supported Canon genuine toner cartridge
Canon Cartridge 125
CANON MARKETING JAPAN INC.
16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan
CANON U.S.A., INC.
One Canon Park, Melville, NY 11747, U.S.A.
CANON EUROPA N.V.
Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
CANON CHINA CO. LTD.
15F Jinbao Building No.89, Jinbao Street, Dongcheng District, Beijing 100005,
PRC
CANON SINGAPORE PTE LTD
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON AUSTRALIA PTY LTD
1 Thomas Holt Drive, North Ryde, Sydney NSW 2113, Australia
CANON GLOBAL WORLDWIDE SITES
FT5-4462 (010)
XXXXXXXXXX
© CANON INC. 2013
PRINTED IN KOREA
Download from Www.Somanuals.com. All Manuals Search And Download.
|