Photo Printer
series
Getting Started
Read Me First
Make sure to read this manual before using the printer. Please keep it in hand for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Using on Additional Computers
(Wired LAN Connection Only)
USB Connection
Wired LAN Connection
Turn on the printer, then install the Print Head and
ink tanks.
Set Up the Printer
To Use the Printer by
Connecting to a Computer
Connect to a computer or network and install the software.
USB Connection
Install the software and connect the
Wired LAN Connection
Install the software and connect the
Setup Additional Computers
Install the software on additional computers to
printer to a computer.
printer to a network.
use the printer on them.
This section describes how to load paper and introduces various features.
After Installing the Printer
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up the Printer
Preparation
■ Devices Required to Connect to Computers
USB Connection
Wired LAN Connection
USB cable
Router, etc.
LAN cable
The USB cable supplied with the printer is required.
A network device (router, etc.) and LAN cable are required.
Set Up the Printer
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Check the Included Items
Before turning on the printer, remove all orange tapes and protective sheets from the inside and outside of the printer.
Print Head
5 ink tanks
clear ink tank
(PBK, BK, Y, M, C)
power cord
USB cable
Cassette
• Manuals
• Setup CD-ROM
(containing the drivers, applications and on-screen manuals)
The USB cable is used during the network setup
procedure.
• Warranty
• cleaning sheets
Set Up the Printer
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Cassette
□ Choosing a Location
1
2
B
A
Store the cleaning sheets in the Cleaning Sheet
Holder (A).
Insert the Cassette (B) against the back end of
the printer.
Cleaning sheets are used for cleaning the Transport Roller.
• When installing the printer, lift and move it with the
help of another person.
• Do not install the printer where an object may
fall on it. The object may fall inside the printer,
resulting in malfunction.
• Do not place any object on top of the printer. It
may fall into the printer when opening covers,
resulting in malfunction.
• For details on how to store the cleaning sheets, refer to
"Cleaning the Transport Roller (Sheet Cleaning)" in the on-
screen manual: Basic Guide.
Set Up the Printer
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn the Power On
1
2
3
A
B
Plug the power cord into the back right of the
printer, then connect the other end to the wall
outlet.
Turn on the printer (A).
Make sure that the POWER lamp (B) lights green.
• Do NOT connect the USB cable or LAN cable at this
stage.
Set Up the Printer
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Print Head
1
2
B
C
A
Open the Paper Output Tray (A) and the Top
Cover (B).
Make sure that the Print Head Holder (C)
moves to the installation position.
• Handle the Print Head carefully. Do not drop or apply
excessive pressure to it.
• The Print Head Holder makes a noise as it moves. This is normal operation.
• If the Print Head Holder does not move, make sure that the printer is turned on.
Set Up the Printer
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
D
E
F
G
Firmly raise the Print Head Lock Lever (D) of the Print Head Holder
until it stops.
Remove the Print Head from the
silver package.
Remove the orange protective cap.
• Do not touch the inside (F) or metal parts (G) of the Print Head. The printer may not print properly
if you touch them.
• There may be some transparent or light color ink on the inside of the bag the Print Head comes in,
or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on
yourself when handling these items.
• Do not touch the inside of the Print Head Holder (E). The printer may not print
properly if you touch it.
Set Up the Printer
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Tilt the Print Head forward and set it in place as shown.
Lower the Print Head Lock Lever completely.
• Hold the Print Head Lock Lever firmly and lower it gently.
• Once you have installed the Print Head, do not remove it
unnecessarily.
• Do not knock the Print Head against the sides of the holder.
Set Up the Printer
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Ink Tanks
1
2
A
B
C
Remove the ink tank from its package.
Remove and discard the orange protective cap (A) located on
the bottom of the ink tank.
• Handle the ink tanks carefully. Do not drop or
apply excessive pressure to them.
• If the Top Cover is left open for more than 10
minutes, the Print Head Holder moves to the
right. In this case, close and reopen the Top
Cover.
• Do not touch the electrical contacts (B) or open ink port (C) on the ink
tank. The printer may not print properly if you touch them.
• Be sure to use the supplied ink tanks.
• Do not hold the sides of the ink tank; ink may splash.
Set Up the Printer
ꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Tilt the ink tank, then insert it under the label and against the back end of
the slot.
Press the PUSH mark on the ink tank firmly until it clicks.
When the installation is completed properly, the Ink lamp lights red.
Make sure that the color of the label matches the ink tank.
• Match the labels when installing.
Set Up the Printer
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
D
E
F
Install all the other ink tanks in the same way.
Close the Top Cover (D).
Install all the ink tanks.
• Wait for about 2 minutes until the POWER lamp (green) (E) stops flashing
and stays lit then operating noise stops, and go to the next step.
Do not open the Top Cover while the lamp is flashing.
The printer vibrates while the lamp is flashing because ink is stirred inside
the printer.
Make sure all the Ink lamps light red.
• If an Alarm lamp (F) flashes orange, make sure that the Print Head and the ink tanks are
• Once you have installed the ink tanks, do not remove them unnecessarily.
correctly installed.
Set Up the Printer
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Clear Ink Tank
1
2
3
A
B
Open the Clear Ink Tank Cover (A).
Open the Clear Ink Tank Locking Cover (B).
Pinch the tab and push back to open.
Remove the orange tape in the direction of the
arrow from the clear ink tank.
Set Up the Printer
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
C
Insert the clear ink tank straight.
Replace the Clear Ink Tank Locking Cover,
Close the Clear Ink Tank Cover.
then press the center firmly until it clicks.
• Once you have installed the clear ink tank, do not
remove it unnecessarily.
• If an Alarm lamp (C) flashes orange, make sure that the clear ink tank are
correctly installed.
Set Up the Printer
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
To Use the Printer by Connecting to a Computer
Select Connection Method
■ Preparation for Setup
□ Notes on Setup
□ Preparation for Wired LAN Connection
• To use the printer by connecting it to a computer, software
including the drivers needs to be copied (installed) to the
computer's hard disk, and setting configured according to the
connection method. Read the following carefully before starting
setup. The installation process takes about 20 minutes. (The
installation time varies depending on the computer environment
or the number of applications to be installed.)
• A router and LAN cable are required
to connect the printer to a wired
LAN. These must be purchased
separately.
• Before connecting the printer
to the network, make sure that
configuration of the computer and
network devices (router, etc.) is
complete, and that the computer
can connect to the network.
• The screens below are based on Windows Vista operating
system Ultimate Edition (hereafter referred to as "Windows
Vista") and Mac OS X v.10.5.x.
Router, etc.
Internet
• Quit all running applications before installation.
• Log on as the administrator (or a member of the Administrators
group).
• If the firewall function of your security software is turned on, a warning message may appear that
Canon software is attempting to access the network.
If such a warning message appears, set the security software to always allow access.
• Do not switch users during the installation process.
• Internet connection may be required during the installation.
Connection fees apply.
• The configuration, router functions, setup procedures and security settings of the network device
vary depending on your system environment. For details, refer to your device's instruction manual or
contact its manufacturer.
• It may be necessary to restart your computer during the
installation process. Follow the on-screen instructions and
do not remove the Setup CD-ROM during restarting. The
installation resumes once your computer has restarted.
• In an office setup, consult your network administrator.
• Mac OS 9, Mac OS X Classic environments, or Mac OS X
v.10.3.8 or earlier are not supported.
• If an error message appears or if you have trouble with the network connection, refer to the printed
manual: Network Setup Troubleshooting.
To Use the Printer by Connecting to a Computer
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the method to connect the printer to the computer according to your system environment.
This is recommended when you use the printer on only one computer.
USB Connection
P.16
This is recommended when using the printer on a computer connected to a network.
Wired LAN Connection
Setup Additional Computers
Perform only the software installation on the computer you want to use.
Windows
P.23
Windows
P.42
Macintosh
P.32
Internet
Internet
Macintosh
P.47
To Use the Printer by Connecting to a Computer
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Connection
□ For Windows Vista/XP
1
If you are using Internet
Explorer 7 or later, you
can use the Web print
software Easy-WebPrint EX.
An internet connection is
required for installation. (It is
also possible to install this
software later.)
TURN OFF THE PRINTER (A).
□ If the Found New Hardware or
Found New Hardware Wizard
dialog box appears:
A
• It takes about 1 minute until the
printer turns off.
If you connect a USB cable to the
printer before installation of the
drivers, this screen appears.
1
Connect the printer to the
computer with a USB cable.
Remove the USB cable
1
connected to your computer.
Make sure the printer is turned on.
The dialog box may close. In this
case, proceed from step .
Click Cancel to quit the
dialog box.
2
Proceed from step
.
3
• The USB Port is located on the right
side at the back of the printer. The
lower port is for USB.
To Use the Printer by Connecting to a Computer
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows Vista
Windows XP/2000
4
2
2
3
3
Turn on the computer, then insert the
Setup CD-ROM into the CD-ROM
drive.
Click Run Msetup4.exe on
the AutoPlay screen, then
click Continue on the User
Account Control dialog box.
The setup program will start
automatically.
If the User Account Control
dialog box reappears in following
steps, click Continue.
• If the program does not start
automatically, double-click the CD-ROM
icon in Computer or My Computer.
When the CD-ROM contents appear,
double-click MSETUP4.EXE.
Turn on the computer, then insert the
Setup CD-ROM into the CD-ROM
drive.
Double-click the Setup icon of
the CD-ROM folder to proceed
to the following screen. Enter
your administrator name and
password, then click OK.
If you do not know your administrator
name or password, click Help, then
follow the on-screen instructions.
• If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.
To Use the Printer by Connecting to a Computer
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
5
Click Easy Install.
Click Install.
The drivers, application software,
and on-screen manuals are installed
all together.
For Windows Vista/XP
• If you are using Internet Explorer 7
or later, you can use the Web print
software Easy-WebPrint EX. An
internet connection is required for
installation. (It is also possible to
install this software later.)
• If you want to select particular items
to install, click Custom Install.
4
Click Easy Install.
Click Install.
The drivers, application software,
and on-screen manuals are installed
all together.
Follow any on-screen instructions to
proceed with the software installation.
• If you want to select particular items
to install, click Custom Install.
To Use the Printer by Connecting to a Computer
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
6
6
Select Use the printer via USB, then click Next.
Follow any on-screen instructions to proceed with the software installation.
When the Start Setup screen appears, click Execute.
To Use the Printer by Connecting to a Computer
ꢀꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information for the Installation
□ Print Head Alignment
D
C
G
B
F
E
Load two sheets of A4 or Letter-sized plain paper into the Cassette (B)
When the pattern (D) shown is printed, Print Head Alignment is complete.
by referring to "Loading Paper" on page 54, then click Execute.
In Windows, click Next on the Print Head Alignment screen.
Do not open the Top Cover (C) while printing.
Wait until the pattern printing ends (about 5 minutes after printing starts).
It takes about 5 minutes to start printing because ink replenishment
is in progress.
When clear ink replenishment is in progress, × appears in the
corresponding area of the ink information screen. Please wait.
• If the Alarm lamp (orange) (E) flashes, press the RESUME/CANCEL button (F) on
the printer to clear the error, then click Next. After the installation is complete, perform
Print Head Alignment by referring to "When Printing Becomes Faint or Colors are
Incorrect" in the on-screen manual: Basic Guide.
• Pull out the Front Tray Extension (G) beforehand.
• The pattern is printed in black and blue.
To Use the Printer by Connecting to a Computer
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information for the Installation
□ Necessary Information for the User Registration
□ About Extended Survey Program
The product serial number is required when registering the product. The serial
number is located inside the printer (as shown in the illustration).
If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed.
(This has no effect on the printer's functionality.)
• When opening the Top Cover, the Print Head Holder moves automatically.
• The screen does not appear on Mac OS X v.10.3.9.
To Use the Printer by Connecting to a Computer
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Click Exit to complete the
installation.
If Restart is displayed, follow
the instruction to restart the
computer.
After restarting the computer,
remove the Setup CD-ROM and
keep it in a safe place.
Next, read "Loading Paper" on page 54!
7
8
Click Exit to complete the
installation.
On the Canon IJ Network Tool
screen, select USB connection, then
click OK.
Canon IJ Network Tool starts
automatically.
Remove the Setup CD-ROM
and keep it in a safe place.
Next, read "Loading Paper" on page 54!
To Use the Printer by Connecting to a Computer
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Wired LAN Connection
□ If the Found New Hardware or
Found New Hardware Wizard
dialog box appears:
□ For Windows Vista/XP
1
2
If you are using Internet
Explorer 7 or later, you
can use the Web print
software Easy-WebPrint EX.
An internet connection is
required for installation. (It is
also possible to install this
software later.)
A
TURN OFF THE PRINTER (A).
Turn on the computer, then
insert the Setup CD-ROM into
the CD-ROM drive.
If you connect a USB cable to the
printer before installation of the
drivers, this screen appears.
The setup program will start
automatically.
Remove the USB cable
1
connected to your computer.
The dialog box may close. In this
case, proceed from step .
Click Cancel to quit the
dialog box.
2
• If the program does not start
automatically, double-click the CD-
ROM icon in Computer or My
Computer.
When the CD-ROM contents
appear, double-click MSETUP4.
EXE.
Proceed from step
.
3
• It takes about 1 minute until the
printer turns off.
To Use the Printer by Connecting to a Computer
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Windows Vista
Windows XP/2000
4
3
4
5
Click Run Msetup4.exe on the AutoPlay screen, then
Click Easy Install.
Click Install.
click Continue on the User Account Control dialog box.
The drivers, application software, and on-screen
manuals are installed all together.
If the User Account Control dialog box reappears in following
steps, click Continue.
For Windows Vista/XP
• If you are using Internet Explorer 7 or later, you can
use the Web print software Easy-WebPrint EX. An
internet connection is required for installation. (It is
also possible to install this software later.)
• If you want to select particular items to install, click
Custom Install.
To Use the Printer by Connecting to a Computer
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
6
7
8
Select Use the printer on network, then click
Next.
Read the License Agreement screen carefully and
click Yes.
When the Please Allow All Install Wizard
Processes screen appears, click Next.
Follow any on-screen instructions to proceed with the
software installation.
To Use the Printer by Connecting to a Computer
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Prepare Cables
9
10
USB cable
LAN cable
On the Setup Method screen, select Connect printer to the network for the
first time, then click Next.
Have a USB and LAN cable ready.
• If the above screen is not displayed, click Cancel and start again from step . Be sure to
select Use the printer on network in step
.
• For a wired LAN connection, prepare a LAN cable separately.
To Use the Printer by Connecting to a Computer
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
11
12
When the Printer Connection screen appears, connect the printer to the computer with a USB
Turn on the printer.
cable.
When the printer is recognized by the computer, a message
appears on the screen.
A USB cable is used to send the network settings to the printer.
• It takes about 40 seconds for the POWER lamp to light green.
• If installation does not continue after 10 minutes, click Help on
• The USB Port is located on the right side at the back of the printer. The lower port is for USB.
the screen in step
, then confirm the message.
To Use the Printer by Connecting to a Computer
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
13
14
B
C
When the Setup Preparations dialog box appears, make
sure that preparation is complete, then click Next.
When the above screen appears, remove the Cap (B) of the printer, connect a network device
with a LAN cable (C), then click Yes.
To Use the Printer by Connecting to a Computer
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
□ If the following dialog box appears
15
When the Set Printer IP Address dialog box appears,
click Connect.
When the Setup Completion dialog box appears, remove the USB cable, then click
Finish.
If the printer is detected automatically, the Set Printer IP
Address dialog box does not appear.
• If no connection is established even after Connect is clicked,
refer to "The Set Printer IP Address Screen is Displayed" in the
printed manual: Network Setup Troubleshooting.
• To change the port name, click Set Port Name. For details, refer to "Changing the Port Name" in the
printed manual: Network Setup Troubleshooting.
• If Unsafe Removal of Device is displayed, click OK.
To Use the Printer by Connecting to a Computer
ꢁꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Important Information for the Installation
□ Print Head Alignment
□ Necessary Information for the
User Registration
F
E
I
D
H
G
Load two sheets of A4 or Letter-sized plain paper into the
Cassette (D) by referring to "Loading Paper" on page 54,
then click Execute.
When the pattern (F) shown is printed, Print Head Alignment
is complete.
The product serial number is required
when registering the product. The
serial number is located inside the
printer (as shown in the illustration).
On the Print Head Alignment screen, click Next.
Do not open the Top Cover (E) while printing.
Wait until the pattern printing ends (about 5 minutes
after printing starts).
It takes about 5 minutes to start printing because ink
replenishment is in progress.
When clear ink replenishment is in progress,
× appears in the corresponding area of the ink
information screen. Please wait.
• If the Alarm lamp (orange) (G) flashes, press the RESUME/
CANCEL button (H) on the printer to clear the error, then click
Next. After the installation is complete, perform Print Head
Alignment by referring to "When Printing Becomes Faint or
Colors are Incorrect" in the on-screen manual: Basic Guide.
• Pull out the Front Tray Extension (I) beforehand.
• The pattern is printed in black and blue.
• When opening the Top Cover, the Print
Head Holder moves automatically.
To Use the Printer by Connecting to a Computer
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
16
Important Information for the Installation
□ About Extended Survey Program
Click Exit to complete the installation.
Next, read "Loading Paper" on
page 54!
If Restart is displayed, follow the instruction to restart the
computer.
If you can agree to Extended Survey Program,
click Agree.
If you click Do not agree, the Extended Survey
Program will not be installed.
After restarting the computer, remove the Setup CD-ROM
and keep it in a safe place.
(This has no effect on the printer's functionality.)
• To use the printer on additional computers, refer to
"Setup Additional Computers" on page 42.
To Use the Printer by Connecting to a Computer
ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Wired LAN Connection
1
2
3
Connect the printer to the computer with a USB cable.
Make sure the printer is turned on.
Turn on the computer, then
insert the Setup CD-ROM
into the CD-ROM drive.
Double-click the Setup icon of the CD-ROM folder to
proceed to the following screen. Enter your administrator
name and password, then click OK.
A USB cable is used to send the network settings to the
printer.
If you do not know your administrator name or password, click
Help, then follow the on-screen instructions.
• The USB Port is located on the right side at the back of the
printer. The lower port is for USB.
• If the CD-ROM folder does not open automatically, double-click
the CD-ROM icon on the desktop.
To Use the Printer by Connecting to a Computer
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
4
5
6
Click Easy Install.
Click Install.
Read the License Agreement screen carefully and
click Yes.
The drivers, application software, and on-screen
manuals are installed all together.
Follow any on-screen instructions to proceed with the
software installation.
• If you want to select particular items to install, click
Custom Install.
To Use the Printer by Connecting to a Computer
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
7
8
When the Start Setup screen appears, click Execute.
Click Restart.
The Print Head Alignment screen appears after the computer has been restarted.
To Use the Printer by Connecting to a Computer
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Important Information for the Installation
□ Print Head Alignment
C
B
F
A
E
D
Load two sheets of A4 or Letter-sized plain paper into the Cassette (A) by referring
to "Loading Paper" on page 54, then click Execute.
When the pattern (C) shown is printed, Print Head Alignment is complete.
Wait until the pattern printing ends (about 5 minutes after printing starts).
Do not open the Top Cover (B) while printing.
It takes about 5 minutes to start printing because ink replenishment is in
progress.
When clear ink replenishment is in progress, × appears in the corresponding
area of the ink information screen. Please wait.
• If the Alarm lamp (orange) (D) flashes, press the RESUME/CANCEL button (E)
on the printer to clear the error, then click Next. After the installation is complete,
perform Print Head Alignment by referring to "When Printing Becomes Faint or
Colors are Incorrect" in the on-screen manual: Basic Guide.
• Pull out the Front Tray Extension (F) beforehand.
• The pattern is printed in black and blue.
To Use the Printer by Connecting to a Computer
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
9
Important Information for the Installation
□ Necessary Information for the User
□ About Extended Survey Program
Registration
Click Exit to complete the installation.
Canon IJ Network Tool starts automatically.
The product serial number is required when
registering the product. The serial number
is located inside the printer (as shown in the
illustration).
If you can agree to Extended Survey Program,
click Agree.
If you click Do not agree, the Extended
Survey Program will not be installed.
(This has no effect on the printer's
functionality.)
Remove the Setup CD-ROM and keep it in a safe place.
• When opening the Top Cover, the Print Head
Holder moves automatically.
• The screen does not appear on Mac OS X
v.10.3.9.
To Use the Printer by Connecting to a Computer
ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
□ If the following screen appears
10
11
On the Canon IJ Network Tool screen,
select LAN connection, then click OK.
If the Setup Preparations screen
appears, make sure that preparation
is complete, then click OK.
Select Setup in the pop-up menu, select iX7000 series in
Printers, then click OK.
• If the above screen is not displayed, start again from step . Be sure to
select LAN connection in step
.
• If no printer is detected, make sure of the following, then click Update.
−
−
The printer is connected to the computer with a USB cable.
The printer is turned on.
To Use the Printer by Connecting to a Computer
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
□ If the following screen appears
12
G
H
When the above screen appears, remove the Cap (G) of the printer, connect a network
device with a LAN cable (H), then click Yes.
When the Set Printer IP Address screen appears,
click Connect.
If the printer is detected automatically, the Set Printer IP
Address screen does not appear.
• If no connection is established even after Connect is
clicked, refer to "The Set Printer IP Address Screen
is Displayed" in the printed manual: Network Setup
Troubleshooting.
To Use the Printer by Connecting to a Computer
ꢂꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Mac OS X v.10.5.x
□ Proceed to the section that relates
to your operating system for further
installation instructions.
Mac OS X v.10.4.x
Mac OS X v.10.3.9
14-B
14-C
13
14-A
Mac OS X v.10.5.x
Mac OS X v.10.4.x
Mac OS X v.10.3.9
14-A
14-B
14-C
1
When the Setup Completion screen appears, remove the
USB cable, then click OK.
Wait for a while, then select Canon
iX7000 series and click Add.
The Printer Setup Utility will start up.
• The alphanumeric characters after
Canon iX7000 series is the printer's
Bonjour service name or MAC address.
• If the printer has not been detected,
make sure of the following.
• To use the printer on additional computers,
refer to "Setup Additional Computers" on
page 47.
−
−
The printer is turned on.
The firewall function of any security
software is turned off.
−
−
The printer is connected to the
network device with the LAN cable.
Next, read "Loading Paper"
on page 54!
The printer is not set to use access
control (MAC address filtering).
To Use the Printer by Connecting to a Computer
ꢂꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Mac OS X v.10.4.x
Mac OS X v.10.3.9
14-C
14-B
1
2
3
4
When the Printer List window
appears, click Add.
Click More Printers in the Printer
Browser window.
Select Canon IJ Network in
the pop-up menu, select iX7000
series in the list of printers,
then click Add.
Make sure that iX7000 series is added
to the list of printers.
• To use the printer on additional computers,
refer to "Setup Additional Computers" on
page 47.
Next, read "Loading Paper"
on page 54!
To Use the Printer by Connecting to a Computer
ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Mac OS X v.10.3.9
14-C
1
2
3
When the Printer List window appears, click
Add.
Select Canon IJ Network in the pop-up menu, select
iX7000 series in the list of printers, then click Add.
Make sure that iX7000 series is added to
the list of printers.
• To use the printer on additional computers, refer
to "Setup Additional Computers" on page 47.
Next, read "Loading Paper"
on page 54!
To Use the Printer by Connecting to a Computer
ꢃꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Setup Additional Computers
Windows Vista
Windows XP/2000
4
1
2
3
Make sure that the printer is turned on and
that it is connected to the network with a
LAN cable.
Turn on the computer, then insert the
Setup CD-ROM into the CD-ROM
drive.
Click Run Msetup4.exe on the AutoPlay screen, then
click Continue on the User Account Control dialog box.
If the User Account Control dialog box reappears in following
steps, click Continue.
The setup program will start automatically.
• If the program does not start automatically,
double-click the CD-ROM icon in
Computer or My Computer.
• It is not necessary to connect the printer to the
computer with a USB cable.
When the CD-ROM contents appear,
double-click MSETUP4.EXE.
To Use the Printer by Connecting to a Computer
ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
4
5
6
Click Easy Install.
Click Install.
Select Use the printer on network, then click
Next.
The drivers, application software, and on-screen
manuals are installed all together.
For Windows Vista/XP
• If you are using Internet Explorer 7 or later, you can use the
Web print software Easy-WebPrint EX. An internet connection is
required for installation. (It is also possible to install this software
later.)
• If you want to select particular items to install, click
Custom Install.
To Use the Printer by Connecting to a Computer
ꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
7
8
9
When the Please Allow All Install Wizard
Processes screen appears, click Next.
On the Setup Method screen, select Printer is
already connected to the network, then click
Next.
Read the License Agreement screen carefully
and click Yes.
Follow any on-screen instructions to proceed with the
software installation.
• If the above screen is not displayed, click Cancel and
start again from step . Be sure to select Use the
printer on network in step
.
To Use the Printer by Connecting to a Computer
ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
10
11
12
When the Printers dialog box appears, select the
printer, then click Next.
When the Setup Completion dialog box appears,
click Finish.
When the Print Head Alignment screen
appears, click Next.
Go to the next step without performing Print Head
Alignment.
Follow any on-screen instructions to proceed with the
installation.
• If the printer is not detected, make sure of the following, click
Update.
−
−
The printer is turned on.
The printer is connected to the network device with the
LAN cable.
• Some programs that switch the network environment
depending on your system environment will enable a firewall
by default. Check the settings of any such software.
• To change the port name, click Set Port Name. For
details, refer to "Changing the Port Name" in the printed
manual: Network Setup Troubleshooting.
To Use the Printer by Connecting to a Computer
ꢃꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
13
Important Information for the Installation
□ Necessary Information for the User
□ About Extended Survey Program
Registration
A
Click Exit to complete the installation.
If Restart is displayed, follow the instruction to restart the
computer.
The product serial number is required when
registering the product. The serial number
is located inside the printer (as shown in the
illustration).
If you can agree to Extended Survey Program,
click Agree.
If you click Do not agree, the Extended Survey
Program will not be installed.
After restarting the computer, remove the Setup CD-ROM and
keep it in a safe place.
(This has no effect on the printer's functionality.)
• When opening the Top Cover (A), the Print
Head Holder moves automatically.
Now you can use the printer on additional
computers.
To Use the Printer by Connecting to a Computer
ꢃꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Setup Additional Computers
1
2
3
Make sure that the printer is turned on and
that it is connected to the network with a
LAN cable.
Turn on the computer, then insert
the Setup CD-ROM into the CD-
ROM drive.
Double-click the Setup icon of the CD-ROM folder to proceed
to the following screen. Enter your administrator name and
password, then click OK.
If you do not know your administrator name or password, click Help,
then follow the on-screen instructions.
• It is not necessary to connect the printer to the
computer with a USB cable.
• If the CD-ROM folder does not open automatically, double-click the CD-
ROM icon on the desktop.
To Use the Printer by Connecting to a Computer
ꢃꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
4
5
6
Click Easy Install.
Click Install.
Read the License Agreement screen carefully and
click Yes.
The drivers, application software, and on-screen manuals
are installed all together.
Follow any on-screen instructions to proceed with the
software installation.
• If you want to select particular items to install, click
Custom Install.
To Use the Printer by Connecting to a Computer
ꢃꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
7
Important Information for the Installation
□ Necessary Information for the User
□ About Extended Survey Program
Registration
A
When the Start Setup screen appears, click Next.
Go to the next step without performing Print Head
Alignment.
The product serial number is required when
registering the product. The serial number
is located inside the printer (as shown in the
illustration).
If you can agree to Extended Survey Program,
click Agree.
If you click Do not agree, the Extended Survey
Program will not be installed.
Follow any on-screen instructions to proceed with the
installation.
(This has no effect on the printer's functionality.)
• When opening the Top Cover (A), the Print Head
Holder moves automatically.
• The screen does not appear on Mac OS X
v.10.3.9.
To Use the Printer by Connecting to a Computer
ꢃꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
□ If the following screen appears
8
9
10
Click Restart.
On the Canon IJ Network Tool
screen, select LAN connection,
then click OK.
If the Setup Preparations
screen appears, make sure that
preparation is complete, then
click OK.
Select Setup in the pop-up menu,
then click Register Printer.
After the computer restarts, Canon IJ
Network Tool starts automatically.
Remove the Setup CD-ROM and keep it in
a safe place.
• If the above screen is not displayed,
start again from step . Be sure to
select LAN connection in step
.
To Use the Printer by Connecting to a Computer
ꢄ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Mac OS X v.10.5.x
□ Proceed to the section that relates to your operating
system for further installation instructions.
Mac OS X v.10.4.x
Mac OS X v.10.3.9
12-B
12-C
11
12-A
Mac OS X v.10.5.x
Mac OS X v.10.4.x
Mac OS X v.10.3.9
12-A
12-B
12-C
1
When the Cancel Setup screen
appears, then click Cancel.
Wait for a while, then select Canon iX7000
series and click Add.
The Printer Setup Utility will start up.
• The alphanumeric characters after Canon iX7000 series is
the printer's Bonjour service name or MAC address.
• If the printer has not been detected, make sure of the
following.
−
−
The printer is turned on.
The firewall function of any security software is turned
off.
−
−
The printer is connected to the network device with the
LAN cable.
Now you can use the printer
on additional computers.
The printer is not set to use access control (MAC
address filtering).
• When the You have no printers
available. screen appears, click Cancel.
To Use the Printer by Connecting to a Computer
ꢄꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Mac OS X v.10.4.x
Mac OS X v.10.3.9
12-C
12-B
1
2
3
4
When the Printer List window
appears, click Add.
Click More Printers in the Printer
Browser window.
Select Canon IJ Network in
the pop-up menu, select iX7000
series in the list of printers,
then click Add.
Make sure that iX7000 series is added
to the list of printers.
Now you can use the printer
on additional computers.
To Use the Printer by Connecting to a Computer
ꢄꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
Macintosh
Mac OS X v.10.3.9
12-C
1
2
3
When the Printer List window appears, click
Add.
Select Canon IJ Network in the pop-up menu, select
iX7000 series in the list of printers, then click Add.
Make sure that iX7000 series is added to
the list of printers.
Now you can use the printer
on additional computers.
To Use the Printer by Connecting to a Computer
ꢄꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
After Installing the Printer
Loading Paper
This section explains how to load
paper in the Cassette (A) and the
Rear Tray (B).
1
2
3
E
D
F
B
G
A
Pull out the Cassette slowly with
both hands, then remove the
Cassette Cover (E).
Pinch the Paper Guides (F) and (G),
then move them to both edges.
Load plain paper.
Load paper with the printing side
facing down.
Pull the Cassette out slowly with both
hands until it stops, then lift its front
slightly and pull it out.
C
The Cassette supports plain paper (C)
only. To print photo paper / Hagaki (D),
be sure to load it in the Rear Tray.
After Installing the Printer
ꢄꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
H
Pinch the Paper Guide, then align it with the
paper size.
Pinch the Paper Guide on the right, then slide it to set the
Paper Guides against both edges of the paper.
Attach the Cassette Cover, then insert
the Cassette against the back end of the
printer.
The Paper Guide will stop when it aligns with the
corresponding mark of paper size.
Make sure that the paper stack does not exceed the line (H).
• Pull and extend the Cassette to load paper larger
than A4.
For details on how to load paper, refer to
"Loading Paper in the Cassette" in "Loading
Paper" in the on-screen manual: Basic Guide.
• There may be a little space between the Paper Guide
and the paper stack.
• To print on specialty paper, be sure to load it in the Rear Tray.
After Installing the Printer
ꢄꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
9
10
2
I
2
L
1
J
K
Open the Paper Support (I).
Move the Paper Guides
(K) to both edges.
Load paper in the center of the
Rear Tray.
Slide the left and right Paper Guides
against both edges of the paper.
Load paper in portrait orientation with
the printing side facing up.
Make sure that the paper stack does not
exceed the line (L).
• For details on media sizes and types you
can use, refer to "Loading Paper" in the on-
screen manual: Basic Guide.
• Pull out the Front Tray Extension (J) beforehand.
Preparation for printing is now complete!
After Installing the Printer
ꢄꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction of Manuals
The following manuals are supplied with the printer.
on-screen manuals
Getting Started
(this manual)
Basic Guide
Advanced
Guide
Troubleshooting
Describes basic operations
and media, and gives an
introduction to other functions
available.
Describes various operating
procedures to make full use of
printer.
Describes troubleshooting tips
for problems you may encounter
when using the printer.
Network Setup
Troubleshooting
Describes how to set up and use
your printer. Introduces the printer
and its functions, the included
manuals and application software.
For details on opening the on-screen manuals, refer to page 58
After Installing the Printer
ꢄꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Solution Menu
Solution Menu is a gateway to functions and information that allow you to make full use of the printer!
Click this button to open the on-screen manuals.
Example: Windows Vista
Click this button to access the website containing
free printing materials exclusive for the printer.
(Internet connection is required.)
Open various applications and on-screen manuals with a single click.
You can start Solution Menu from the Canon Solution Menu icon on the desktop (Windows) or
on the Dock (Macintosh).
If you have a problem with printer settings, click the Change settings or find solutions to
problems. in Solution Menu to open My Printer (Windows only).
*The buttons displayed vary depending on
the country or region of purchase.
After Installing the Printer
ꢄꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Utilizing the Printer
Use applications supplied with the printer
to easily enhance documents and photos,
print on both sides of paper or print in A3
size.
Also, it is useful to feed paper from the
Cassette when printing a large number
of copies (of conference materials,
documents, etc.).
For details on how to use the application
software and the printer, refer to the
on-screen manuals: Basic Guide and
Advanced Guide.
After Installing the Printer
ꢄꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Help from Canon
Toll-Free Live Tech Support— (1-800-828-4040) under warranty
This option provides live telephone technical support, free of service charges,
Monday-Friday (excluding holidays), during the warranty period.
Telephone Device for the Deaf (TDD) support is available at (1-866-251-3752).
Ordering Information
The following ink tanks are compatible with this printer.
Order #
PGI-9PBK
PGI-7BK
PGI-9Y
PGI-9M
PGI-9C
1034B002
2444B002
1037B002
1036B002
1035B002
2442B002
PGI-9Clear
Call 1-800-OK-CANON to locate a dealer near you, or visit the Canon eStore at
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042 U.S.A.
QT5-2699-V02
XXXXXXXX
©CANON INC.2009
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTED IN THAILAND
|