Canon Fax Machine MX360 User Manual

Dedicated Fax Line  
Setup Guide  
MX360 or MX410  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting The Phone Lines  
Before  
Wall jack  
After  
Wall jack  
(Phone Cord included with Canon printer)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
If Your Wall Plate Has Two Jacks  
Use the jack that supports the fax line.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
If Your Wall Plate Has One Jack For Two Lines  
If your wall jack provides one jack for two phone lines, it would be best to use a  
“2 Line 3 WayAdapter.” This adapter can be purchased at most stores that sell  
electronics. This device creates three plugs where there was one. One jack will  
be for your voice line. The other jack can be used for your fax transactions. In  
most cases, line 1 (L1) is used for phone calls; L2 is used of faxing. The third  
jack (L1+L2) allows access to both lines. This is where you would plug in a 2-  
line telephone, if available.  
The L1 jack is usually your  
voice line  
The L2 jack is usually your fax line  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Fax to Phone Line Connection  
First, connect one end of the supplied telephone cord to the telephone jack on  
the wall.  
Wall Jack  
(Phone Cord included with Canon printer)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Fax to Phone Line Connection  
Next, connect the other end of the supplied telephone cord to the lower jack  
(labeled “L”) on the MX360 or MX410.  
Wall Jack  
(Phone Cord included with Canon printer)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting Up The Receive Mode  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 1  
Step 2  
Turn on the MX360 or MX410 by  
Press the FAX button.  
pressing the ON button.  
MX360  
MX410  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 3  
Step 4  
Press the Menu button  
Use the Left or Right Arrow button to  
select “Receive mode set”.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 5  
Step 6  
Press the OK button  
The “Receive mode set” screen will  
appear  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 7  
Step 8  
Use the Left or Right arrow button  
Ensure that “Fax only mode” is  
to select “Fax only mode”  
displayed  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 9  
Step 10  
Press the OK button  
The “Make advanced settings?”  
screen will appear  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 11  
Step 12  
Press the FAX button  
Your MX360 or MX410 is now set to  
FAX only mode. Notice that the  
mode is listed on the fax standby  
screen.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To Receive A Fax  
When a call comes in on the fax  
line, the MX360 or MX410 will  
answer the call and begin  
receiving the fax.  
You do not have to be home or  
interact with the MX360 or MX410  
to receive a fax.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Black Decker Coffeemaker DCM100BC User Manual
Bloomfield Fryer WFAE 55F User Manual
Bosch Appliances Ventilation Hood GWH 1600 H User Manual
Brinkmann Outdoor Fountain Stainless Steel Tier User Manual
Bush Hog Brush Cutter SQ84T SQUealer User Manual
Bush Hog Sander MP5 User Manual
Cabletron Systems Network Card 36 User Manual
Canon Camera Lens EF 300mm f 4L IS USM User Manual
Casio Digital Camera EX Z370 User Manual
Cisco Systems Cordless Telephone 30 VIP User Manual