|
ExpoDisc White and Warm Balance Filters
Canon Custom WB Procedures
Canon 300D Digital Rebel and Digital Rebel 350D XT
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.
3. Aim the camera in the appropriate direction for the given lighting condition and
press the shutter release button. See the ExpoDisc Instruction manual for more
information on where to aim the camera.
4. Push ‘MENU’ button and select < camera icon > tab.
5. Select ‘CUSTOM WB’ using < down arrow >, then push the ‘SET’ button.
6. Push ‘SET’ button again to select the ExpoDisc ‘gray frame’ just taken.
7. Push the ‘MENU’ button to exit menu.
8. Push and hold the ‘WB’ button < down arrow > on the back of the camera
while rotating main dial on top of the camera to select the custom WB icon in the
control panel.
9. Remove the ExpoDisc, return camera to auto focus mode (if desired), and start
shooting.
Canon 10D
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.
3. Aim the camera in the appropriate direction for the given lighting condition and
press the shutter release button. See the ExpoDisc Instruction manual for more
information on where to aim the camera.
4. Push the ‘MENU’ button.
5. Scroll down to ‘CUSTOM WB’ in the menu using the thumb dial, then push the
‘SET’ button in the center of the thumb dial.
6. Push the ‘SET’ button again to select the ExpoDisc ‘gray frame’ just taken.
7. Push the ‘MENU’ button to exit menu.
8. Push and hold the ‘AF-WB’ button on top of the camera while rotating thumb
dial to select the custom WB icon in the control panel.
9. Remove the ExpoDisc, return camera to auto focus mode (if desired), and start
shooting.
Canon 20D
1. Install the ExpoDisc and set the camera to Manual Focus Mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes, or set the correct manual exposure in “M” mode.
Copyright, 2005 ExpoImaging, Inc.
“Canon” and the Canon camera models listed are Trademarks of Canon, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
press the shutter release button. See the ExpoDisc Instruction manual for more
information on where to aim the camera.
5. Press the menu button to access menu system.
6. Press and hold the ‘select’ button and rotate the thumb dial to access the
‘camera recording sub menu’ <camera icon>, then release the ‘select’ button.
7. Press and hold the ‘select’ button and scroll down to ‘custom WB’ then release
the ‘select’ button.
8. Press and hold the ‘select’ button and rotate the thumb dial to select the last
picture taken, then release the ‘select’ button.
9. Press and hold the ‘select’ button and rotate thumb dial to select ‘OK’ then
release the ‘select’ button.
10. Press the menu button to exit menu system.
11. Remove the ExpoDisc, return camera to auto focus mode (if desired), and
start shooting.
Copyright, 2005 ExpoImaging, Inc.
“Canon” and the Canon camera models listed are Trademarks of Canon, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|