Facsimile Guide
Please read this guide before operating this equipment.
ENG
After you finish reading this guide, store it in a safe place for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
0
Ot¯
imageRUNNER
3530/2830/2230
Facsimile Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Manuals for the Machine
The manuals for this machine are divided as follows. Please refer to them for detailed information.
The manuals supplied with optional equipment are included in the list below. Depending on the system
configuration and product purchased, some manuals may not be needed.
Guides with this symbol are PDF manuals included on the
Guides with this symbol are printed manuals.
CD-ROM
accompanying CD-ROM. (See footnote on the next page.)
• Basic Operations
• Troubleshooting
Reference Guide
• Copying Instructions
• Mail Box Instructions
• Fax Instructions
Copying Guide
Mail Box Guide
Facsimile Guide
(This Document)
• Setting Up the Network Connection and
Network Quick Start Guide
Remote UI Guide
Installing the CD-ROM Software
• Remote User Interface Instructions
CD-ROM
CD-ROM
• Network Connectivity and Setup Instructions
Network Guide
• Network ScanGear Installation and
Instructions
Network ScanGear
User's Guide
CD-ROM
• UFR II Printer Instructions
CD-ROM
CD-ROM
CD-ROM
UFR II Printer Guide
UFR II Driver Guide
Fax Driver Guide
• UFR II Printer Driver Installation and
Instructions
• Fax Driver Installation and Instructions
• To view the manual in PDF format, Adobe Reader/Acrobat Reader/Acrobat is required. If Adobe Reader/Acrobat Reader/Acrobat is not installed on
your system, please download it from the Adobe Systems Incorporated website (http://www.adobe.com).
• The machine illustration on the cover may differ slightly from your machine.
Download from Www.Somanuals.com. All Manuals Search And Download.
How This Manual Is Organized
Chapter 1 Introduction to Fax Functions
Chapter 2 Basic Send and Receive Methods
Chapter 3 Special Fax Functions
Chapter 4 Checking/Changing the Fax Status
Chapter 5 Customizing Fax Settings
Chapter 6 System Manager Settings
Chapter 7 Printing Communication Reports
Chapter 8 Troubleshooting
Chapter 9 Appendix
Includes the report samples, glossary, specifications, and index.
Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our
products, if you need an exact specification, please contact Canon.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
How To Use This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix
Illustrations Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Abbreviations Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Users in the U.S.A.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Users in Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Utilisation au Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii
Super G3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx
Setting the Display Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11
Selecting the Type of Telephone Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12
Setting the Current Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14
Platen Glass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-36
Feeder (DADF-N1) (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-39
Using the Touch Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Stop Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43
Using the System Monitor Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43
Resolution, Density, and Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
Sending Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
Direct Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8
Stamping Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-14
Dialing Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-16
Numeric Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-16
Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-18
Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-19
Coded Speed Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24
Group Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-26
Receiving Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-29
Available Paper Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35
Delaying a Send Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2
Memory Boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5
Using a Memory Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8
Scanning Originals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8
Printing and Erasing Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11
Changing the Reception Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-17
Faxing Two-Sided Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-19
Document Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-21
Specifying the Document Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-22
Registering the Document Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-25
Changing the Zoom Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28
Preset Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-29
Zoom by Percentage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-31
Sending with a Subaddress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-33
Using a PIN Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-35
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting PIN Code Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-35
Fax Information Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-41
Printing the TX Job Status/Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6
Registering the Standard Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4
Printing the TX Terminal ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Changing the Standard Fax Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-14
Initializing the Standard Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-16
One-Touch Speed Dialing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-26
ECM Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-41
Pause Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-43
Reception Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-50
Reducing a Received Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-58
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Two-Sided Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-61
2 On 1 Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-63
Setting Up Memory Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-65
Confidential Memory Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-66
Relay Memory Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-71
Batch Sending Memory Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-82
Erasing a Memory Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-89
System Settings Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
Communications Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3
Send Start Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3
Receive Start Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-6
PIN Code Access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-28
Reception Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-30
Restricting New Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-33
Report Settings Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
Specifying Report Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
TX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
Activity Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-6
RX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10
Memory Inbox RX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12
Printing Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-14
Address Book List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-14
User's Data List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-16
When Problems Occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2
Sending Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2
Receiving Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-4
Other Situations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-5
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-7
Self-Diagnostic Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-7
List of Error Codes without Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-8
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
TX Report/Error TX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2
RX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-5
Address Book List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Thank you for purchasing the Canon imageRUNNER 3530/2830/2230. Please read this
manual thoroughly before operating the machine in order to familiarize yourself with its
capabilities, and to make the most of its many functions. After reading this manual, store it in
a safe place for future reference.
How To Use This Manual
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures, restrictions,
handling precautions, and instructions that should be observed for safety.
.
Indicates a warning concerning operations that may lead to death or
injury to persons if not performed correctly. In order to use the machine
safely, always pay attention to these warnings.
.
WARNING
CAUTION
Indicates a caution concerning operations that may lead to injury to
persons, or damage to property if not performed correctly. In order to use
the machine safely, always pay attention to these cautions.
.
Indicates operational requirements and restrictions. Be sure to read
these items carefully in order to operate the machine correctly, and to
avoid damage to the machine.
IMPORTANT
NOTE
.
Indicates a clarification of an operation, or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Keys Used in This Manual
The following symbols and key names are a few examples of how keys to be
pressed are expressed in this manual:
• Touch Panel Display Keys:
[Key Name]
Examples:
[Cancel]
[Done]
• Control Panel Keys:
<Key icon> + (Key Name)
Examples:
(Start)
(Stop)
Hereafter, the following name substitutions take place:
• Transmission/Sending:
• Reception/Receiving:
TX
RX
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays Used in This Manual
Screen shots of the touch panel display used in this manual are those taken when
the following optional equipment is attached to the imageRUNNER 3530: the
Feeder (DADF-N1), Super G3 FAX Board, UFR II Printer Kit, Finisher-S1,
Additional Finisher Tray-B1, and Cassette Feeding Unit-Y2.
Note that functions that cannot be used depending on the model or options, are not
displayed on the touch panel display.
The keys which you should press are marked with a
, as shown below.
When multiple keys can be pressed on the touch panel display, all keys are marked.
Select the keys which suit your needs.
Press [Address Book].
Press this key for operation.
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Illustrations Used in This Manual
Illustrations used in this manual are those displayed when the imageRUNNER 3530
has the following optional equipment attached to it: the Feeder (DADF-N1),
Finisher-S1, Additional Finisher Tray-B1, and Cassette Feeding Unit-Y2.
Abbreviations Used in This Manual
In this manual, product names and model names are abbreviated as follows:
Microsoft® Windows NT® operating system:
Microsoft® Windows® 2000 operating system:
Microsoft® Windows® XP operating system:
Microsoft® Windows® operating system:
Novell NetWare®:
Windows NT
Windows 2000
Windows XP
Windows
NetWare
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal Notices
FCC (Federal Communications Commission)
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
Operator's Manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Use of shielded cables are required to comply with Class A limits in Subpart B of
Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Users in the U.S.A.
Preinstallation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine. See Chapter 9,
"Appendix," in the Reference Guide for specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be used.
2. Order an RJ11-C telephone wall jack (USOC), which should be installed by the
telephone company. If the RJ11-C wall jack is not present, telephone/facsimile
operation is not possible.
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Order a normal business line from your telephone company's business
representative. The line should be a regular voice grade line or an equivalent
one. Use one line per unit.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas
NOTE
Canon recommends an individual line following industry standards, i.e., 2500
(touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX
(Private Branch Exchange) unit without "Call Waiting" can be used with your facsimile
unit. Key telephone systems are not recommended because they send nonstandard
signals to individual telephones for ringing and special codes, which may cause a
facsimile error.
C. Power Requirements
The machine should be connected to a standard 120 volt AC, three-wire grounded
outlet only.
Do not connect this machine to an outlet or power line shared with other appliances
that cause "electrical noise." Air conditioners, electric typewriters, copiers, and
machines of this sort generate electrical noise that often interferes with
communications equipment and the sending and receiving of documents.
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the rear panel of this equipment is a label that contains,
among other information, a product identifier in the format of US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.
The REN (Ringer Equivalence Number) is used to determine the number of devices
that may be connected to a telephone line. Excessive RENs on a telephone line
may result in the devices not ringing in response to an incoming call. In most, but
not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the total
RENs, contact the local telephone company. The REN for this product is part of the
product identifier that has the format US:AAAEQ##TXXXX. The digits represented
by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
An FCC compliant telephone line cable and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone network
or premise wiring using a compatible modular jack that is Part 68 compliant.
This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs.
xiv
Download from Www.Somanuals.com. All Manuals Search And Download.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures
described in this guide or the Reference Guide, disconnect the equipment from the
telephone line cable and disconnect the power cord. The telephone line cable
should not be reconnected or the main power switch turned ON until the problem is
completely resolved. Users should contact their local authorized Canon Facsimile
Service Dealer for the servicing of equipment.
Rights of the Telephone Company
If this equipment (imageRUNNER 3530/2830/2230) causes harm to the telephone
network, the telephone company may temporarily disconnect service. The
telephone company also retains the right to make changes in facilities and services
that may affect the operation of this equipment. When such changes are necessary,
the telephone company is required to give adequate prior notice to the user.
However, if advance notice is not possible, the telephone company will notify the
customer as soon as possible. Also, the customer will be advised of his/her right to
file a complaint with the FCC if he/she believes it is necessary.
WARNING
The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device to send any message via a
telephone facsimile machine unless such message clearly contains in a margin
at the top or bottom of each transmitted page, or on the first page of the
transmission, the date and time it is sent and an identification of the business or
other entity, or other individual sending the message and the telephone number
of the sending machine or such business, other entity, or individual.
NOTE
In order to program this information into your machine, you should complete the
procedure to register your name, unit's telephone number, time, and date in Chapter 1.
(For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide.)
xv
Download from Www.Somanuals.com. All Manuals Search And Download.
Users in Canada
Preinstallation Requirements for Canon Facsimile Equipment
A. Location
Supply a suitable table, cabinet, or desk for the machine. See Chapter 9,
"Appendix," in the Reference Guide for specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or rotary) should be used. (Touch-tone is
recommended if available in your area.)
2. Order a CA11A modular jack which should be installed by the telephone
company. If the CA11A jack is not present, installation cannot occur.
3. Order a normal business line from your telephone company's business
representative. The line should be a regular voice grade line or an equivalent
one. Use one line per unit.
DDD (Direct Distance Dial) line
or
IDDD (International Direct Distance Dial) line if you communicate overseas
NOTE
Canon recommends an individual line following industry standards, such as 2500
(touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX
(Private Branch Exchange) unit without "Call Waiting" can be used with your facsimile
unit. Key telephone systems are not recommended because they send nonstandard
signals to individual telephones for ringing and special codes, which may cause a
facsimile error.
C. Power Requirements
The power outlet should be a three-prong grounded receptacle (Single or Duplex).
It should be independent from copiers, heaters, air conditioners, or any electric
equipment that is thermostatically controlled. The rated value is 115 volts and 15
amperes. The CA11A modular jack should be relatively close to the power outlet to
facilitate installation.
xvi
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
• This product meets the applicable Industry Canada technical specifications.
• Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection. In
some cases, the company's inside wiring associated with a single line individual
service may be extended by means of a certified connector assembly (telephone
extension cord). The customer should be aware that compliance with the above
conditions may not prevent deterioration of service in some situations.
• The Ringer Equivalence Number is an indication of the maximum number of
devices allowed to be connected to a telephone interface. The termination of an
interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices does not exceed five.
• The REN of this product is 1.0.
• Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made
by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
• Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines, and internal metallic water pipe
system, if present, are connected together. This precaution may be particularly
important in rural areas.
CAUTION
Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as
appropriate.
NOTE
This equipment complies with the Canadian ICES-003 Class A limits.
xvii
Download from Www.Somanuals.com. All Manuals Search And Download.
Utilisation au Canada
Conditions à Remplir Préalablement à L'installation d'un Télécopieur
Canon
A. Emplacement
Prévoir une table, un meuble, ou un bureau suffisamment solide et de taille
appropriée (voir le chapitre 9, Annexe (Appendix), du Guide de référence
(Reference Guide) pour les indications de poids et dimensions).
B. Installation téléphonique
1. Une seule ligne téléphonique (tonalités ou impulsions) doit être utilisée.
2. Il faut commander un jack modulaire CA11A qui sera installé par la compagnie
téléphonique. Sans ce jack, la mise en place serait impossible.
3. Si vous vous abonnez à une nouvelle ligne, demandez une ligne d'affaires
normale de qualité téléphonique courante ou équivalente. Prenez un
abonnement d'une ligne par appareil.
Ligne automatique interurbaine
ou
Ligne automatique internationale
(si vous communiquez avec les pays étrangers)
NOTE
Canon vous conseille d'utiliser une ligne individuelle conforme aux normes industrielles,
à savoir: ligne téléphonique 2500 (pour appareil à clavier) ou 500 (pour appareil à
cadran/impulsions). Il est également possible de raccorder ce télécopieur à un système
téléphonique à poussoirs car la plupart de ces systèmes émettent des signaux d'appel
non normalisés ou des codes spéciaux qui risquent de perturber le fonctionnement du
télécopieur.
C. Condition d'alimentation
Raccordez le télécopieur à une prise de courant plus terre à trois branches, du type
simple ou double, et qui ne sert pas à alimenter un copieur, un appareil de
chauffage, un climatiseur ou tout autre appareil électrique à thermostat.
L'alimentation doit être de 115 volts et 15 ampères. Pour faciliter l'installation, le
jack CA11A doit être assez proche de la prise de courant.
xviii
Download from Www.Somanuals.com. All Manuals Search And Download.
Remarques
• Le présent matériel est conforme aux spécifications techniques applicables
d'Industrie Canada.
• Avant d'installer cet appareil, l'utilisateur doit s'assurer qu'il est permis de le
connecter à l'équipement de la compagnie de télécommunication locale et doit
installer cet appareil en utilisant une méthode de connexion autorisée. Il se peut
qu'il faille étendre la circuiterie intérieure de la ligne individuelle d'abonné, qui a
été installée par la compagnie, au moyen d'un jeu de connecteurs homologués
(rallonge téléphonique).
L'attention de l'utilisateur est attirée sur le fait que le respect des conditions
mentionnées ci-dessus ne constitue pas une garantie contre les dégradations de
qualité du service dans certaines circonstances.
• L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de
terminaux qui peuvent être raccordés à une interface téléphonique. La
terminaison d'une interface peut consister en une combinaison quelconque de
dispositifs, à la seule condition que la somme d'indices d' équivalence de la
sonnerie de tous les dispositifs n'excède pas 5.
• Le nombre d'équivalents sonnerie (REN) de ce produit est 1,0.
• Les réparations sur un appareil certifié doivent être faites par une société
d'entretien canadienne autorisée par le Gouvernement canadien et désignée par
le fournisseur. Toute réparation ou modification que pourrait faire I'utilisateur de
cet appareil, ou tout mauvais fonctionnement, donne à la compagnie de
télécommunication le droit de débrancher I'appareil.
• Pour sa propre protection, I'utilisateur doit s'assurer que les prises de terre de
I'appareil d'alimentation, les lignes téléphoniques et les tuyaux métalliques
internes, s'il y en a, sont bien connectés entre eux. Cette précaution est
particulièrement importante dans les zones rurales.
CAUTION
Au lieu d'essayer de faire ces branchements eux-mêmes, les utilisateurs sont
invités à faire appel à un service d'inspection faisant autorité en matière
d'électricité ou à un électricien, selon le cas.
NOTE
Respecte les limites de la classe A de la NMB-003 du Canada.
xix
Download from Www.Somanuals.com. All Manuals Search And Download.
Super G3
Super G3 is a phrase used to describe the new generation of fax
machines that use ITU-T V.34 standard 33.6 Kbps* modems.
Super G3 High Speed Fax machines allow transmission times of
approximately 3 seconds* per page which results in reduced
telephone line charges.
* Approximately 3 seconds per page fax transmission time based
on CCITT/ITU-T No.1 Chart, (JBIG, Standard Mode) at 33.6
Kbps modem speed. The Public Switched Telephone Network
(PSTN) currently supports 28.8 Kbps modem speeds or slower,
depending on telephone line conditions.
Trademarks
Canon, the Canon logo and imageRUNNER are trademarks of Canon Inc.
Adobe and Adobe Acrobat are trademarks of Adobe Systems Incorporated.
IBM and OS/2 are trademarks of International Business Machines Corporation.
Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of
Microsoft Corporation in the United States and other countries.
NetWare® and Novell are registered trademarks of Novell, Inc.
NDS is a trademark of Novell, Inc.
UNIX is a registered trademark of The Open Group in the United States and other
countries.
Ethernet is a trademark of Xerox Corporation.
Other product and company names herein may be the trademarks of their
respective owners.
Copyright
Copyright 2004 by Canon Inc. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording, or by any
information storage or retrieval system without the prior written permission of
Canon Inc.
xx
Download from Www.Somanuals.com. All Manuals Search And Download.
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS
MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN,
INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OF USE OR AGAINST INFRINGEMENT OF ANY PATENT. CANON
INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES
RESULTING FROM THE USE OF THIS MATERIAL.
xxi
Download from Www.Somanuals.com. All Manuals Search And Download.
xxii
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction to Fax Functions
CHAPTER
This chapter is an introduction to the Fax function.
Things You Must Do Before Using This Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Selecting the Type of Telephone Line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12
Registering Your Machine's Fax Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-19
Registering Sender Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-21
Canceling a Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42
Using the Touch Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-42
Using the Stop Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-43
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
What This Machine Can Do
1
All the elements you will ever need in a digital
multitasking machine.
If the imageRUNNER 3530/2830/2230 is equipped with
the optional UFR II Printer Kit and Super G3 Fax Board,
you will be able to utilize the many Fax functions of the
machine.
Super G3 Fax Function
This machine's Super G3 fax function is
compatible with most Super G3 fax
machines used in office environments.
Compared to ordinary fax machines, Super
G3 enables high-speed fax transmissions,
Send
which results in reduced transmission
costs.
What This Machine Can Do
Download from Www.Somanuals.com. All Manuals Search And Download.
1-2
Increased Security with Subaddress Transmission
This machine's fax function is compatible
with ITU-T (International
Telecommunication Union -
Subaddress
Telecommunication Standardization Sector)
standard subaddress features. As long as
the remote party's fax machine supports
subaddress fax transmissions, you can
send or receive documents with increased
security by attaching a subaddress and
password to all of your fax transactions.
1
Password
ECM Function for High Quality Images
This machine's fax function is compatible
with ECM (Error Correction Mode). ECM
corrects errors and distorted or poor quality
fax transmissions that arise from line noise.
It also enables you to send or receive
high-quality faxes even if the condition of
your telephone line is not ideal.
Receiving Faxes in Memory
Received fax documents can be stored in a
Memory Box instead of being printed. You
can check the sender information and the
number of pages that each document
contains before printing or forwarding it to
another destination. You can also specify
Memory
Box
Fax Reception
the time when received documents are
stored in memory by specifying the timer
setting.
Send
Print
What This Machine Can Do
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3
Automatic Forwarding
The machine can be set to automatically
forward received fax documents that match
the specified forwarding conditions to any
destination. Automatic forwarding can also
be set to activate at a specified time.
Forward
1
What This Machine Can Do
1-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the imageRUNNER 3530/2830/2230
If you press
(FAX), the Fax Basic Features screen appears. The Fax function
1
enables you to scan documents and send them to specified destinations via fax.
Original
Scan
Memory Box
Fax
Group
Fax
Overview of the imageRUNNER 3530/2830/2230
Download from Www.Somanuals.com. All Manuals Search And Download.
1-5
Fax Basic Features Screen
The screen on the left, which appears when
(FAX) is selected, is called the Fax Basic
Features screen.
1
Press to set the resolution, density, and image quality of your document. (See
Press to send faxes using a PIN (Personal Identification Number) code. (See "Using a
Press [Coded Dialing], followed by a three digit code, to specify a destination that is
Press to redial the last number that was dialed with the numeric keys. (See "Redialing,"
Overview of the imageRUNNER 3530/2830/2230
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Press to send an original or receive a document with an ITU-T standard subaddress and
1
Press to select a destination from the Address Book, or to search for a number registered
➞ See Chapter 3
Press to select and use the Special Features
modes.
➞ See Chapter 4
Press to check the status or details of a send or receive job, or to cancel a job.
Overview of the imageRUNNER 3530/2830/2230
Download from Www.Somanuals.com. All Manuals Search And Download.
1-7
Special Features Screen
When you press [Special Features] on the Fax
Basic Features screen, the Special Features
screen appears, and displays special modes
available for facsimile processing. Keys which
have an arrow ( ) indicate that more modes can
be set when you press that key.
1
To close the Special Features screen and return
to the Fax Basic Features screen, press [Done].
Pressing
(Help) on the control panel after
selecting a Special Features mode, brings up a
help screen containing guidance information.
This is useful when you want to know more
about the mode.
Press to specify a time to automatically send your documents. (See "Delaying a Send
Press to manage sent and received documents using any kind of memory box:
3-19.)
3-21.)
Overview of the imageRUNNER 3530/2830/2230
1-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Press to select a sender's name, which will appear at the top of every document you
1
Press to set the Receiving mode to 'Memory Receive' or 'Forward'. (See "Changing the
Overview of the imageRUNNER 3530/2830/2230
Download from Www.Somanuals.com. All Manuals Search And Download.
1-9
Things You Must Do Before Using This Machine
This section describes the important setting registrations and procedures that must
be done before the machine is used for sending operations.
1
According to recent amendments to the FCC (Federal Communications
Commission) rules governing the use of facsimile equipment in the United States,
the following sender information must be printed on every facsimile transmission:
• Your fax number
• Your personal name or company name
• Time and date of transmission
IMPORTANT
•
If you attempt to use the machine without registering the necessary information correctly,
the machine may not function properly.
•
Use phone lines with modular jacks measuring 9.7 feet (3 meters) or less to ensure
optimum connection and sending speeds.
■ Setting the Telephone Line Type
To set the type of telephone line connected to the machine with the optional Super G3
FAX Board installed, check whether it is a rotary dial (rotary pulse) or a touch-tone type,
■ Registering the Sending Record
The sending record is printed at the top of the every document you send to the recipient.
The registered information is printed, as shown below. Depending upon the model of the
machine at the receiving side, this information may appear on the display while
communication is taking place.
Sender's
Name (TTI)
Destination
Name
Date
Time
Page Number
Fax Number
Sender Information
FAX (404)XXX-XXXX
05/14/2004 FRI 15:00
CANON SALES
Atlanta office
001/001
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-10
• Date and Time
- The date and time of the transmission are recorded.
• Fax Number
- Your machine's fax number is recorded.
• Sender's Name (TTI (Transmit Terminal Identification))
- The name registered as the sender's name is recorded.
• Destination Name
1
- If you send an original using Coded Speed Dialing or by selecting a destination from
the Address Book, the stored destination's name appears on the sending record. (See
• Page Number
- The current page number out of the total number of pages of the original is recorded.
NOTE
•
•
•
You can set the machine so that the sending record is not printed. However, for users in
the United States, this information must be printed at the top of every fax document you
If the machine is set so that the sending record is printed at the top of the recording
paper, and not all of the items are registered, only the required registered items and the
total number of original pages are printed. However, when using Direct Sending, the total
number of original pages are not printed.
If you do not want to print the destination name on the recipient's paper, set Display
Destination Name to 'Off' in TX Terminal ID in User Settings in Custom Fax Settings
Setting the Display Language
If you decide to switch the display language, set Language Switch in Common
Settings (from the Additional Functions screen) to 'On' before entering characters.
If Language Switch is set to 'Off', and then you set it to 'On' after entering
characters, the characters may not be displayed correctly. In this case, either
re-enter the characters after setting Language Switch to 'On', or enter characters
with Language Switch set to 'Off'.
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-11
Selecting the Type of Telephone Line
Set the type of telephone line that is connected to the machine.
If you are not sure what type of telephone line you have, check with your local
telephone company. To operate the Fax function, you must know if the machine is
connected to a touch-tone or rotary pulse telephone line. The machine can be set
to operate with either type of telephone line.
1
Be sure to check the type of telephone line that you are using, and make the correct
setting. If this setting is incorrect, you will not be able to communicate with other
machines.
Follow the procedure below to switch the fax setup between tone and pulse dialing.
NOTE
The default setting is 'Tone'.
1
Press
(Additional Functions) ➞ [Custom Fax Settings].
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-12
2
3
Press [User Settings].
1
Press [▼] or [▲] until [Tel Line Type] appears ➞press [Tel Line
Type].
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-13
4
Select the type of telephone line ➞ press [OK].
1
If you do not know the telephone line type, call your local telephone service
provider for details.
The selected mode is set.
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Setting the Current Date and Time
You can set the current date and time. The current date and time settings are used
as standard timer settings for functions that require them.
• GMT:
The time at the Greenwich Observatory in England is
called GMT (Greenwich Mean Time).
• Time Zone:
The standard time zones of the world are expressed
globally in terms of the difference in hours ( up to 12
hours) from GMT (0 hours). A time zone is a region
throughout which this time difference is the same.
• Daylight Saving Time: In some countries, time is advanced throughout the
summer season. The period in which this is applied is
called "Daylight Saving Time."
NOTE
You can also specify to automatically synchronize the date and time with a server on the
network from the Additional Functions screen. (See Chapter 3, "Using a TCP/IP
Network," in the Network Guide.)
Things You Must Do Before Using This Machine
1-14
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Press
(Additional Functions) ➞ [Timer Settings].
1
Press [Date & Time Settings].
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-15
3
Enter the current date (month, day, year) and time using
(numeric keys).
-
1
Enter the month and the day using four digits (including zeros).
Enter all four digits of the year, and the time in 24-hour notation, as four digits
(including zeros) without a space.
Examples:
May 6
➞
➞
➞
0506
0705
2318
7:05 a.m.
11:18 p.m.
NOTE
If you make a mistake when entering values, press
again, starting with the month.
(Clear)
➞
enter the values
● If you are setting the Time Zone:
❑ Press [Time Zone Settings] ➞ select the time zone where the machine is
located ➞ press [OK].
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-16
NOTE
•
The default setting is 'GMT-5:00'.
Eastern Time (US/Canada):
Central Time (US/Canada):
Mountain Time (US/Canada):
Pacific Time (US/Canada):
GMT-5:00
GMT-6:00
GMT-7:00
GMT-8:00
1
•
If the desired time zone is not displayed, press [▼] or [▲] to scroll through the list.
● If you are setting Daylight Saving Time:
❑ Press [DaylightSaving Time Settings] ➞ [On] ➞ [Start Date].
❑ Select the month and day from the Month and Day drop-down lists,
respectively.
❑ Press [-] or [+] to enter the time of day you want Daylight Saving Time to take
effect ➞ press [OK].
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-17
❑ Press [End Date] ➞ select the month, day, and time at which Daylight Saving
Time ends ➞ press [OK].
1
❑ Press [OK].
NOTE
•
•
•
•
•
If you set Daylight Saving Time, the machine automatically sets the standard time
of the machine one hour forward at the specified date and time.
The default setting is 'On'. (Between 2:00 a.m. on the first Sunday of April and 2:00
a.m. on the last Sunday of October.)
You can also use
your entry.
-
(numeric keys) to enter the time, and
(Clear) to clear
You can change the value entered for <Time> by pressing [-] or [+], even if you
entered the value using (numeric keys).
The time can be set in one hour increments, from 0 to 23 hours.
-
4
Press [OK].
The selected mode is set.
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-18
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Registering Your Machine's Fax Number
You must store your machine's fax number. This number is printed on the top of
every document you send to the recipient.
1
Your machine's telephone number may also be displayed on the touch panel
display of the recipient's machine, depending on the model of their machine.
1
2
Press
[User Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
Press [Unit Telephone #].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Things You Must Do Before Using This Machine
1-19
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Enter the unit's telephone number using
(numeric keys) ➞ press [OK].
-
1
Details of each item are shown below.
[Space]:
Press to insert a space between the area code and the local fax
number (optional).
[+]:
Use to insert a country code. Press [+] after the country code,
and before the fax number.
Press to move the position of the cursor.
Press to delete the last number entered.
[
][ ]:
[Backspace]:
You can enter up to 20 digits for the fax number.
The selected mode is set.
NOTE
If you make a mistake when entering the number, press
correct number.
(Clear)
➞
enter the
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-20
Registering Sender Names
You can register any name as the sender's name, such as the section or
department's name, or an individual's name.
If each user registers their personal name as a sender name, they can select their
sender name (to replace the unit's name), which is printed at the top of every
document they send. (However, depending on the model of the recipient's machine,
the sender's name may not be displayed.)
1
NOTE
You can set to display and print the sender's name instead of the name stored as the
unit's name in Sender's Names (TTI) from the Special Features screen. (See "Setting the
1
2
Press
[User Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
Press [Sender's Names (TTI)].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Things You Must Do Before Using This Machine
1-21
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select the number under which you want to register the
sender's name ➞ press [Register].
1
You can store up to 99 sender names (01 to 99).
If the desired number is not displayed, press [▼] or [▲] to scroll to the desired
number.
You can also enter and specify the number under which you want to register the
sender's name using
-
(numeric keys).
To delete a registered sender's name, select the number under which the name
is registered ➞ press [Erase]. Only one sender's name can be erased at a time.
4
Enter the sender's name ➞ press [OK].
You can enter up to 24 characters for the sender's name.
To cancel registering the sender's name, press [Cancel].
The selected mode is set.
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-22
NOTE
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
To delete all of the entered characters, press
.
•
(Clear).
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
1
Registering the Unit's Name
Your name or company's name must be registered as the unit's name (a
department name is optional).
For example:
• Your name:
John Smith
Canon
• Company name:
• Company name and department: Canon-Accounting Dept.
When you send a document, the recipient's machine displays or prints your name
or company's name (and department's name, if applicable) as the sender's
information on the recording paper.
Some fax models also display sender information on the touch panel display during
transmission.
1
Press
[User Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
Things You Must Do Before Using This Machine
1-23
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press [Unit Name].
1
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
3
Enter a name ➞ press [OK].
You can enter up to 24 characters for the unit's name.
To cancel registering the unit's name, press [Cancel].
The selected mode is set.
NOTE
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
To delete all of the entered characters, press
.
•
(Clear).
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-24
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
1
Things You Must Do Before Using This Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
1-25
Flow of Sending Operations
This section describes the flow of basic sending operations.
1
NOTE
•
Before using the Fax function, it is useful to read the following topics:
- Main power and control panel power (See Chapter 1, "Before You Start Using This
Machine," in the Reference Guide.)
- Routine maintenance (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
•
•
The maximum number of send jobs that the machine can handle is 64. However, the
actual number of send jobs that the machine can handle may be fewer than 64, if multiple
documents are being sent at the same time.
7-3.)
1
Press the appropriate keys in accordance with the messages
displayed on the touch panel display.
If there are no messages displayed, proceed to step 2.
● If the message <You must insert a control card.> appears:
❑ Insert a control card into the optional Card Reader-C1.
The Basic Features screen is displayed.
NOTE
For instructions on using the optional Card Reader-C1, see Chapter 3, "Optional
Equipment," in the Reference Guide
.
Flow of Sending Operations
Download from Www.Somanuals.com. All Manuals Search And Download.
1-26
● If the message <Enter the Department ID and Password using the
numeric keys.> appears:
❑ Press [Department ID] ➞ enter the Department ID using
-
(numeric
keys).
❑ Press [Password] ➞ enter the password using
❑ Press (ID).
-
(numeric keys).
1
The Basic Features screen is displayed.
NOTE
For instructions on using Department ID Management, see Chapter 6, "System
Manager Settings," in the Reference Guide
.
2
Press
(FAX).
MAIL
BOX
FAX
SCAN
COPY
1
2
3
Flow of Sending Operations
Download from Www.Somanuals.com. All Manuals Search And Download.
1-27
3
4
Place your originals.
1
NOTE
Specify the basic fax settings on the Fax Basic Features
screen.
NOTE
From the Fax Basic Features screen, you can specify the sending method (Direct,
Speed Dialing or Redial), Resolution, Density, Image Quality, whether to stamp
your originals after sending, or specify a subaddress.
Flow of Sending Operations
Download from Www.Somanuals.com. All Manuals Search And Download.
1-28
5
Specify the desired fax modes on the Special Features screen.
❑ Press [Special Features].
1
❑ Press the desired mode key to set the mode ➞ press [Done] repeatedly until
the Fax Basic Features screen appears.
For more information on the available functions on the Special Features
screen, see Chapter 3.
6
Specify the destinations.
NOTE
A maximum of 256 destinations can be specified at the same time. (Out of the 256
destinations, 64 new destinations can be specified.) If you specify a group, which is
made up of several destinations, each destination in the group is counted as a
separate address.
Flow of Sending Operations
Download from Www.Somanuals.com. All Manuals Search And Download.
1-29
● If a destination is stored in the Address Book:
on p. 2-19.)
1
● If a destination is not stored in the Address Book:
❑ Enter the desired destination using
-
(numeric keys). (See "Numeric
NOTE
A maximum of 64 new destinations can be specified at the same time.
Flow of Sending Operations
Download from Www.Somanuals.com. All Manuals Search And Download.
1-30
● If a destination is stored in the One-Touch Speed Dialing Directory:
❑ Press [Coded Dialing] ➞ enter the three digit one-touch button code using
-
1
7
Press
(Start).
Flow of Sending Operations
1-31
Download from Www.Somanuals.com. All Manuals Search And Download.
If the following screen is displayed, follow the instructions on the touch panel
display ➞ press
(Start) once for each original. When scanning is complete,
press [Done].
1
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
IMPORTANT
The size of the original is detected automatically. However, if the output paper in
the recipient's machine is not equal to the scanned document size, the original
image may be reduced in size to match it.
8
If you want to cancel sending, press
9
(Stop).
NOTE
•
•
•
You can press
(Stop) to cancel a send job that is being scanned.
9
When scanning is complete, remove your originals.
Flow of Sending Operations
1-32
Download from Www.Somanuals.com. All Manuals Search And Download.
10 If the optional Card Reader-C1 is attached, remove the control
card.
1
NOTE
For instructions on using the optional Card Reader-C1, see Chapter 3, "Optional
Equipment," in the Reference Guide
.
11 If Department ID Management is set, press
(ID).
NOTE
For instructions on using Department ID Management, see Chapter 6, "System
Manager Settings," in the Reference Guide
.
Flow of Sending Operations
Download from Www.Somanuals.com. All Manuals Search And Download.
1-33
Placing Originals
Place your originals on the platen glass or into the optional feeder, depending on
the size and type of the original, and the send settings that you have specified.
1
■ Platen Glass
Place the originals on the platen glass when scanning bound originals (such as books and
magazines), heavy or lightweight originals, and transparencies.
■ Feeder
Place the originals into the feeder when you want to scan several originals at the same
time, and press
(Start). The machine automatically feeds the originals to the platen
glass and scans them. Two-sided originals can also be automatically turned over and
scanned as two-sided documents.
IMPORTANT
You can scan originals in the feeder only if the optional Feeder (DADF-N1) is attached.
Document Sizes
The size of the original is automatically detected, and the document is scanned. If
the output paper in the recipient's machine is not equal to the scanned size, the
original image may be reduced in size or divided into smaller parts before it is sent.
The machine cannot always detect the size of the original if it is a nonstandard
paper size, such as a book. In this case, specify the size at which you want to scan
Placing Originals
1-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Orientation
You can place an original either vertically or horizontally. Always align the top edge
of your original with the back edge of the platen glass (by the arrow in the top left
corner) or the back edge of the feeder.
1
Platen Glass
Place the original
face down.
Place the original
face down.
Vertical Placement
Horizontal Placement
Feeder
Place the original
face up.
Place the original
face up.
Vertical Placement
Horizontal Placement
Placing Originals
1-35
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
•
If the top edge of the original is not aligned with the back edge of the platen glass (by the
arrow in the top left corner), your original may not be scanned correctly, depending on the
scan and send modes that you have set.
•
Originals of the following sizes can be placed either vertically or horizontally. However,
the scanning speed for horizontally placed originals is somewhat slower than vertically
placed originals. Place originals horizontally when scanning with a Preset Zoom, such as
when enlarging an LTR original onto 11" x 17" paper.
1
- Platen glass:
- Feeder:
LTR, STMT
LTR, STMT
•
•
Horizontally placed LTR and STMT originals are referred to as LTRR and STMTR.
11" x 17" and LGL originals must be placed horizontally.
Platen Glass
You should use the platen glass when scanning bound originals (such as books
and magazines), heavy or lightweight originals, and transparencies. (See
NOTE
The machine automatically detects the size of the following originals: 11" x 17", LGL,
LTR, and LTRR.
1
Lift the feeder/platen cover.
IMPORTANT
This machine is equipped with an open/close sensor on the feeder/platen cover
(see circled area in the above illustration). When placing originals on the platen
glass, lift the feeder/platen cover approximately 11 7/8" (300 mm) so that the
sensor detaches from the feeder/platen cover. If the sensor does not detach from
the feeder/platen cover, the size of the originals may not be detected correctly.
Placing Originals
Download from Www.Somanuals.com. All Manuals Search And Download.
1-36
2
Place your originals face down.
1
The surface of the original that you want to scan must be placed face down.
Align the top edge of your original with the back edge of the platen glass (by the
arrow in the top left corner).
Place books and other bound originals on the platen glass in the same way.
NOTE
When you are enlarging an LTR or STMT original onto 11" x 17" or LGL paper,
place the original horizontally on the platen glass, and align it with the LTRR or
STMTR marks.
Placing Originals
Download from Www.Somanuals.com. All Manuals Search And Download.
1-37
3
Gently close the feeder/platen cover.
1
CAUTION
• Close the feeder/platen cover gently to avoid catching your hands, as this
may result in personal injury.
• Do not press down hard on the feeder/platen cover when using the platen
glass to scan thick books. Doing so may damage the platen glass and
result in personal injury.
IMPORTANT
If you are placing the original on the platen glass, the size of the original is detected
after the feeder/platen cover is closed. Be sure to close the feeder/platen cover
before scanning.
NOTE
•
Remove the original from the platen glass when scanning is complete.
Placing Originals
Download from Www.Somanuals.com. All Manuals Search And Download.
1-38
•
The size of STMT and STMTR originals cannot be detected. After pressing
(Start), follow the instructions on the screen to specify the original size. You can
also manually select the paper size.
1
Feeder (DADF-N1) (Optional)
You should use the feeder when you want to scan several originals at the same
time. Place the originals into the feeder and press (Start). The machine
automatically feeds the originals to the platen glass and scans them into memory.
Two-sided originals can also be automatically turned over and scanned as
two-sided documents.
You can place the following originals into the feeder's original supply tray:
• Weight:
- 13 to 32 lb bond (50 to 128 g/m2)
• Size:
- 11" x 17", LGL, LTR, LTRR, STMT or STMTR
• Tray Capacity:
- 50 sheets (20 lb bond (80 g/m2))
- 10 sheets (13 lb bond (50 g/m2))
IMPORTANT
•
Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals
Placing Originals
Download from Www.Somanuals.com. All Manuals Search And Download.
1-39
•
If the same original is fed through the feeder repeatedly, the original may fold or become
creased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times
(this number varies, depending on the type and quality of the original).
•
•
If the feeder rollers are dirty from scanning originals written in pencil, perform the feeder
cleaning procedure. (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
Always smooth out any folds in your originals before placing them into the feeder.
1
1
Adjust the slide guides to fit the size of your originals.
2
Neatly place your originals with the side to be scanned face
up in the original supply tray.
Place your originals as far into the feeder as they will go, until the Original Set
indicator is lit.
Original Set Indicator
If any dirt on the original scanning area is detected when the originals are placed
in the feeder, the following screen appears. Even though streaks may appear on
the scanned image, you can continue to scan your documents by pressing
[Done].
It is recommended, however, that you open the feeder, clean the scanning area,
and then close the feeder. The following screen will not appear once the
scanning area is clean.
Placing Originals
Download from Www.Somanuals.com. All Manuals Search And Download.
1-40
For instructions on cleaning the original scanning area, see Chapter 7, "Routine
Maintenance," in the Reference Guide.
1
IMPORTANT
•
•
Do not add or remove originals while they are being scanned.
When scanning is complete, remove the originals from the original output area to
avoid paper jams.
Original Output Area
NOTE
•
The scanned originals are output to the original output area in the order that they
are fed into the feeder.
•
When you are enlarging LTR or STMT originals onto 11" x 17" or LGL paper, place
the originals horizontally.
Placing Originals
Download from Www.Somanuals.com. All Manuals Search And Download.
1-41
Canceling a Job
You can cancel a fax job using the touch panel display, System Monitor screen, or
by pressing (Stop) on the control panel.
1
Using the Touch Panel Display
You can cancel a fax job by pressing [Cancel], while the job is being scanned.
1
Press [Cancel] on the pop-up screen that appears while the
machine is scanning.
The send job is canceled.
2
Remove your originals.
Canceling a Job
Download from Www.Somanuals.com. All Manuals Search And Download.
1-42
Using the Stop Key
You can cancel a send job by pressing
(Stop), while the job is being scanned.
1
Press
9
(Stop).
1
The send job is canceled.
2
Remove your originals.
Using the System Monitor Screen
You can cancel a send job while it is waiting to be processed, or while it is being
sent.
1
Press [System Monitor].
Canceling a Job
Download from Www.Somanuals.com. All Manuals Search And Download.
1-43
2
3
Press [Fax].
1
Select [TX Job Status] or [RX Job Status].
Canceling a Job
Download from Www.Somanuals.com. All Manuals Search And Download.
1-44
4
Select the fax job that you want to cancel ➞ press [Cancel].
1
If the job that you want to cancel is not displayed, press [▼] or [▲] to scroll
through the list.
You cannot select multiple jobs and cancel them all at once. Select and cancel
one job at a time.
If a job is in the process of being sent, it may not be canceled even if you press
[Cancel].
The message <Is it OK to cancel?> appears on the touch panel display.
5
Press [Yes].
If you do not want to cancel the job, press [No].
Canceling a Job
Download from Www.Somanuals.com. All Manuals Search And Download.
1-45
● To cancel a Sequential Broadcast:
❑ Select the Sequential Broadcast job to be canceled ➞ press [Details] ➞
[Broadcast List] to verify the destinations of the fax job.
❑ Press [Done] repeatedly until the Status screen appears ➞ press [Cancel].
❑ Press [All] or [Only One].
1
If you select [Only One], the job that is currently being sent is canceled.
If you do not want to cancel any job of the Sequential Broadcast, press [Don't
cancel].
The message <Canceling...> appears for approximately two seconds on the
touch panel display.
The fax job is canceled.
NOTE
The canceled job is displayed as <NG> (No Good) on the Log screen.
Canceling a Job
Download from Www.Somanuals.com. All Manuals Search And Download.
1-46
6
Press [Done].
The display returns to the Fax Basic Features screen.
1
Canceling a Job
Download from Www.Somanuals.com. All Manuals Search And Download.
1-47
1
Canceling a Job
Download from Www.Somanuals.com. All Manuals Search And Download.
1-48
Basic Send and Receive
2
Methods
CHAPTER
This chapter describes the basic methods for sending and receiving documents.
Resolution, Density, and Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Memory Sending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
Sending Fax Documents Manually. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10
Stamping Originals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-14
Dialing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-16
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolution, Density, and Image Quality
To ensure that a received fax document is easy to read, set the resolution, density,
and image quality to match the originals you are sending.
2
NOTE
•
•
•
•
You can store the most frequently used resolution, density, and image quality settings.
If you frequently scan dark, faint, or difficult to see originals, it is recommended that you
Modes that are specified before sending your originals return to their default settings
when scanning completes or the preset Auto Clear Time is reached.
Although originals sent in the Fine, Super Fine, Ultra Fine, Photo, or Text/Photo modes
enhance image clarity, transmission may take longer than if the originals are sent in the
Standard mode.
•
The default settings are:
- Resolution:
- Density:
Standard
Standard
- Image Quality: Text
■ Resolution
Adjusts the resolution for documents with fine text and thin lines. The higher the
resolution, the higher the output quality, but the scanning speed is slower. The following
settings are available:
Standard:
Use when sending normal, typewritten, or printed documents containing
only text and no drawings, photographs, or illustrations.
Fine:
Use for sending originals at twice the detail of the Standard resolution mode.
Super Fine: Use for sending originals at four times the detail of the Standard resolution
mode. If the recipient's machine does not support this mode, the document
is automatically sent in the Fine mode.
Ultra Fine: Use for sending originals at eight times the detail of the Standard resolution
mode. If the recipient's machine does not support this mode, the document
is automatically sent in the Super Fine or Fine mode.
Resolution, Density, and Image Quality
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
•
If you are using the Ultra Fine mode with the Image Quality mode set to 'Photo',
transmission may be slow.
•
If the recipient's machine does not support the Super Fine or Ultra Fine mode, the
document is sent at the set resolution of the recipient's machine.
■ Density
Adjusts the lightness/darkness of originals scanned for sending:
2
Dark:
Standard: Use for documents with normal, printed, or typewritten text.
Light: Use for documents with dark text or colors.
Use for documents with light text or colors.
■ Image Quality
You can manually select the image quality according to the type of original you are
scanning. The following three image quality modes are available:
Text:
This mode is best suited for scanning text originals. Blueprints or pencil drawn
originals can also be scanned clearly.
Text/Photo: This mode is best suited for scanning originals containing both text and
images/photos, such as magazines or catalogues.
Photo:
This mode is best suited for scanning images printed with halftone dots.
1
Place your originals ➞ press [Resolution/Density/Image
Quality].
NOTE
Resolution, Density, and Image Quality
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select the resolution, density, and image quality of the
document you are sending ➞ press [Done].
2
The selected mode is set, and the display returns to the Fax Basic Features
screen.
3
Specify the destination ➞ press
(Start).
For more information on specifying the destination, see "Dialing Methods," on p.
2-16.
If you want to specify other sending conditions, set them before specifying the
Functions.")
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Resolution, Density, and Image Quality
Download from Www.Somanuals.com. All Manuals Search And Download.
2-4
Sending Methods
This section describes the methods and advantages of Memory Sending and Direct
Sending. It also describes how to stamp sent or scanned originals.
2
NOTE
If a paper jam occurs in the optional feeder while the original is being scanned,
transmission is canceled. Try scanning again.
■ Memory Sending
Sends the documents after they have been scanned into the machine's memory.
Document scanning and sending is faster. You can start scanning a document for sending
even while the machine is busy performing other tasks.
■ Direct Sending
Sends the documents directly, without storing the data in the machine's memory. Direct
Sending is slower than Memory Sending, but since this method bypasses memory, you
can send a document ahead of other documents stored in memory.
Memory Sending
All of the originals to be sent are first scanned and read into memory, then sent.
This enables you to get your document back quickly so that you do not need to stay
near the machine once the originals have been scanned.
Memory Sending takes place unless Direct Sending is specified.
IMPORTANT
Memory Sending is automatically set when using the Delayed Send mode, or when
multiple destinations are specified.
NOTE
•
The machine can hold a total of approximately 8,000 sent and received pages in
memory.
•
If the memory becomes full, delete unnecessary received documents using the System
Sending Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-5
1
2
Place your originals.
NOTE
Select the desired send settings.
For instructions on selecting the send settings, see:
2
• Chapter 3, "Special Fax Functions"
3
4
Specify the destination.
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Sending Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-6
To change the document size from the pop-up screen that appears while the
machine is scanning, press [Document Size] ➞ select the document's size ➞
press [OK].
2
To change the resolution, density, and image quality of the document while the
machine is scanning, press [Resolution/Density/Image Quality] on the pop-up
screen that appears while the machine is scanning ➞ specify each setting ➞
press [Done].
Scanning starts, and the documents are sent from memory.
The display returns to the Fax Basic Features screen after scanning is complete.
Sending Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-7
During transmission, the transaction number, destination's telephone number, and
page number currently being sent, are displayed in the Job Monitor area.
2
NOTE
•
To cancel scanning, press [Cancel] on the touch panel display or
control panel.
(Stop) on the
•
•
The available memory is displayed in the lower right corner of the screen.
The transaction number is used for reference when checking the transmission
results, changing the destination, or canceling the fax job. (See "Checking/
•
•
If there is no response from the recipient's machine or if a transmission error
occurs, the machine automatically redials the number and attempts to send the
document again. Automatic redialing is carried out twice, at two minute intervals.
If you cannot send the document after redialing, check the destination's telephone
number. Replace the original, and try sending the document again.
Direct Sending
Direct Sending enables you to send your document directly to the recipient without
storing it in memory. The machine sends each page of the document to the
destination as it is scanned.
Although Direct Sending is slower than Memory Sending, you can use Direct
Sending when you need to send an urgent document ahead of other documents
stored in memory.
Sending Methods
2-8
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT
•
You can directly send a document of two or more pages only when using the feeder. You
can only send one page at a time when you place your original on the platen glass.
•
•
You can specify only one destination at a time when using Direct Sending.
If an error occurs or you cancel transmission in the Direct Sending mode, you can check
how many pages have been sent to the destination by printing an Activity Report, or on
the Log screen for Fax on the System Monitor screen.
•
If you cancel Direct Sending during transmission, the originals that have already been
scanned are sent.
2
1
Place your originals.
NOTE
2
Make sure the machine is ready to send ➞ press [Direct].
A check mark ( ) appears in the box to the left of [Direct].
NOTE
If you want to cancel Direct Sending, press [Direct] again.
3
Select the desired send settings.
For instructions on selecting the send settings, see:
• Chapter 3, "Special Fax Functions"
Sending Methods
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Specify the destination.
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
2
Scanning starts.
The display returns to the Fax Basic Features screen after your originals are sent.
During transmission, the transaction number, destination's telephone number, and
page number currently being sent are displayed in the Job Monitor area.
If the transmission completes successfully, the message <Transmission OK>
appears in the Job Monitor area for approximately two seconds.
After the original has been sent, Direct Sending is canceled automatically.
NOTE
To cancel scanning, press [Cancel] on the touch panel display or
control panel.
(Stop) on the
Sending Fax Documents Manually
This mode enables you to manually send fax documents after checking that the
destination is ready to receive fax transmissions.
IMPORTANT
•
•
Manual Sending enables you to send a document consisting of two or more pages only if
you use the optional Feeder (DADF-N1). However, you can only send one page at a time
when you place your originals on the platen glass.
If you cancel Manual Sending during transmission, the pages that have already been
scanned are sent. You can check how many pages have been sent to the destination by
Sending Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-10
1
2
Place your originals.
2
NOTE
Make sure that the machine is ready to send.
Sending Methods
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press [On-hook].
2
You should hear the dial tone.
4
Specify the destination using
pressing [One-touch Dialing].
-
(numeric keys) or by
You can enter an extension number after dialing the fax number.
Sending Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-12
Details of each item are shown below.
[RX Start]:
This key is used only for receiving data from a fax
information service. It is not used when sending. (See
[Tone]:
Press when you want to directly call an extension line
that is connected to a PBX (Private Branch Exchange),
which accepts only tone signals. If you press [Tone], the
letter <T> appears. (See "Fax Information Services," on
p. 3-41.)
2
Press [▼] (reduce) or [▲] (increase) to adjust the
volume of the dial tone.
< > or < >:
[One-touch Dialing]:
Press to specify destinations using the one-touch
buttons. (See "Address Book," on p. 2-19.)
NOTE
•
You can change settings for Resolution, Density, and Image Quality before you
•
To cancel Manual Sending, press [End].
5
When you hear the other party or carrier signal (a high-pitched
tone), press (Start).
Scanning starts and the document is sent.
During the transmission, the transaction number, destination's telephone number,
and page number are displayed in the Job Monitor area.
Sending Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-13
Stamping Originals
The machine can print a stamp (approximately 1/8" (3 mm) in diameter) on the front
side of scanned originals.
2
Position at which
stamp is applied.
Position at which
stamp is applied.
Vertical placement
Horizontal placement
IMPORTANT
•
•
The Stamp mode cannot be used with the Document Size (Other Size) mode.
The Stamp mode cannot be used when sending a fax document in the Direct Sending
mode.
NOTE
The Stamp mode can be set only if the optional Feeder (DADF-N1) is attached.
1
Place your originals into the feeder.
NOTE
Sending Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-14
2
Make sure the machine is ready to send ➞ press [Stamp].
2
A check mark ( ) appears in the box to the left of [Stamp].
NOTE
To cancel the Stamp mode, press [Stamp] again.
3
Specify the destination ➞ press
Scanning starts.
(Start).
A stamp mark ( ) appears on the original.
NOTE
•
•
If the stamp is not marked clearly, see Chapter 7, "Routine Maintenance," in the
Reference Guide
.
Sending Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-15
Dialing Methods
This machine provides you with four ways to specify the fax destination:
■ Using the Numeric Keys
2
You can specify one or more destinations using
-
(numeric keys).
■ Redialing
You can specify the last destination that was dialed with
pressing [Redial] on the Fax Basic Features screen.
-
(numeric keys) by
■ Using Coded Speed Dialing
You can specify one or more destinations by pressing [Coded Dialing] on the Fax Basic
Features screen followed by a three digit code.
■ Using the Address Book
Specify the destination by pressing [Address Book] on the Fax Basic Features screen,
and select a destination from the Address Book.
Numeric Keys
You can dial the fax number of one or more recipients using
-
(numeric keys)
on the control panel.
IMPORTANT
If Restrict New Addresses in System Settings (from the Additional Functions screen) is
set to 'On' when the machine is in the System Management mode, you cannot specify a
destination using
-
(numeric keys).
1
Place your originals.
NOTE
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-16
2
Make sure the machine is ready to send ➞enter the recipient's
fax number using (numeric keys).
-
2
Details of each item are shown below.
[Backspace]: Press to delete the last number entered.
[Pause]:
Press to insert a pause of several seconds in the fax number that
you are dialing. If you insert a pause within the fax number, the
letter <p> is displayed between the numbers. If you insert a
pause at the end of the fax number, the letter <P> appears.
When dialing an overseas number, insert a pause after the
[Tone]:
Press when you want to directly call an extension line that is
connected to a PBX (Private Branch Exchange), which accepts
only tone signals. If you press [Tone], the letter <T> appears.
[Next]:
Press to specify another destination after specifying the first
destination using the numeric keys.
IMPORTANT
You cannot insert a pause at the beginning of a number.
NOTE
•
•
You can enter a maximum of 120 characters for the fax number.
If you enter a pause at the end of the number, the pause is always 10 seconds
long.
•
You can press
(Clear) to clear your entry.
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-17
3
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts, and the document is sent to the specified destination.
Redialing
2
Redialing enables you to specify the last destination that was dialed using the
numeric keys. This mode is useful if you are sending several documents to the
same destination.
IMPORTANT
If Restrict New Addresses in System Settings (from the Additional Functions screen) is
set to 'On' when the machine is in the System Management mode, you cannot use the
Automatic Redial mode.
NOTE
•
•
•
If you specify more than one destination using the numeric keys, you can only redial the
last destination specified.
You cannot redial a destination that you specified using One-Touch Speed Dialing or
Coded Speed Dialing.
You cannot redial a destination that you specified after pressing [On-hook].
1
Place your originals.
NOTE
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-18
2
Make sure the machine is ready to send ➞ press [Redial].
2
The number that you last dialed using the numeric keys is displayed in the Job
Monitor area.
3
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts, and the document is sent to the specified destination.
Address Book
The Address Book is a directory for storing fax destinations. A maximum of 200
destinations can be stored. Storing a destination in the Address Book saves you the
effort of entering frequently used destinations' fax numbers each time you send a
job.
NOTE
•
•
Destinations must be stored in the address book beforehand.
You cannot redial a destination that has been selected from the Address Book.
1
Place your originals.
NOTE
Dialing Methods
2-19
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Make sure the machine is ready to send ➞ press [Address
Book] ➞ select the destination.
2
● If you want to select the destination using use the One-Touch Speed
Dialing keys:
❑ Press [
] (Index)
Index
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-20
❑ Select the index where the desired destination is stored.
2
NOTE
If the desired destination is not displayed, press [▼] or [▲] to scroll through the list.
❑ Select the destination ➞ press [Done].
Speed Dialing Number
One-Touch Speed
Dialing Keys
NOTE
•
If you want to specify other destinations from the Address Book, repeat the above
procedure.
•
•
Each index can store up to 15 destinations, except for the last index, which can
store only five destinations. Therefore, the Address Book can store a maximum of
200 destinations.
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-21
● If you want to select a destination in alphabetical order:
❑ Press [Alphabetic Order] ➞ [STU].
2
NOTE
The Toronto Office is used as an example for this procedure.
❑ Press [T].
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-22
❑ Select the desired destination ➞ press [Done].
2
NOTE
•
If the desired destination is not displayed, press [▼] or [▲] to scroll to the desired
destination.
•
•
To display the One-Touch Speed Dialing keys, press [Index Order].
If you want to select other destinations in alphabetical order, repeat the above
procedure.
The Fax Basic Features screen appears, and the fax numbers and names of the
selected destinations are displayed.
3
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts, and the document is sent to the specified destination.
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-23
Coded Speed Dialing
Coded speed dialing enables you to start a document transmission by pressing
[Coded Dialing] followed by a three digit code. All coded speed dialing numbers
must be stored in the Address Book beforehand. This enables you to dial other
coded speed dialing numbers, and send the document to a number of destinations
in a single operation.
NOTE
2
1
2
Place your originals.
NOTE
Make sure the machine is ready to send ➞ press [Coded
Dialing].
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-24
3
Enter the desired three digit coded speed dialing number (001
to 200) using
-
(numeric keys).
1
2
3
6
9
4
7
5
8
0
2
If you want to specify other coded speed dialing numbers, repeat steps 1 to 3.
The fax number and name of the selected destination appear on the touch panel
display.
NOTE
•
If you enter an incorrect number, press
correct number.
(Clear)
➞
[Coded Dialing]
➞
enter the
•
If you do not know the coded speed dialing number under which the recipient's fax
number is stored, you can search for the recipient using the Address Book. (See
•
If you want to send the same original simultaneously to another destination, press
[Next]
➞
specify the destination.
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-25
4
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts, and the document is sent to the specified destination.
Group Dialing
2
Group Dialing enables you to dial a group of registered one-touch or coded speed
dialing fax numbers. This is useful if you want to send the same document to
several destinations. You can register up to 200 fax numbers in one group.
NOTE
•
Sending a document to a number of destinations at the same time is called "Sequential
Broadcast Sending."
•
A maximum of 256 destinations can be specified at the same time. (Out of the 256
destinations, 64 new destinations can be specified.) If you specify a group, which is made
up of several destinations, each destination in the group is counted as a separate
address.
•
For instructions on registering destinations for group dialing, see "Storing Group
1
Place your originals.
NOTE
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-26
2
Make sure the machine is ready to send ➞ specify the group
destination.
❑ Press [Address Book].
2
❑ Press the one-touch speed dialing key containing the destinations for the group
dial ➞ press [Done].
To specify two or more groups, select all of the desired one-touch speed
dialing keys containing the destinations for the group dial ➞ press [Done].
To specify two or more destinations using Redial, Coded Speed Dialing, or
-
(numeric keys), press [Next] ➞ consecutively specify the destinations.
If you are using One-Touch Speed Dialing, press [Address Book] ➞ specify
the destination ➞ press [Done].
NOTE
•
To cancel a selected group destination, press the one-touch speed dialing
destination key again.
•
To use Group Dialing, you must register all the destinations for the group
Dialing Methods
2-27
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts, and the document is sent to the specified destination.
2
Dialing Methods
Download from Www.Somanuals.com. All Manuals Search And Download.
2-28
Receiving Print Jobs and Fax Documents
■ Receiving Print Jobs
The machine receives and prints print jobs sent from a computer.
2
■ Receiving Fax Documents
You can automatically forward received fax documents to specified destinations. For more
information on automatically forwarding documents, see "Automatic Forwarding of
Receiving Documents
1
When documents are being received, the Processing/Data
indicator on the control panel flashes a green light.
0
NOTE
During reception, the transaction number and information related to the sender are
displayed on the touch panel display.
Receiving Print Jobs and Fax Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
2-29
2
When document reception is complete, the Processing/Data
indicator on the control panel maintains a steady green light.
This indicates that documents are stored in memory.
0
2
NOTE
•
The Processing/Data indicator flashes or maintains a steady green light even when
the machine enters the Sleep mode.
•
The Error indicator flashes a red light when either the amount of available memory
is low or paper needs to be loaded in a paper drawer.
3
The document is printed.
The Processing/Data indicator goes out when documents stored in memory are
printed.
NOTE
•
•
•
•
If there is no paper on which the received document can be printed, the received
document is stored in memory.
The machine can hold a total of approximately 8,000 sent and received pages in
memory.
Documents which have been stored in memory because paper has run out, are
automatically printed when paper is loaded in a paper drawer.
If a printing error occurs, the Error indicator flashes a red light.
Receiving Print Jobs and Fax Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
2-30
Receiving Documents into Memory
If Memory Lock Settings in Communications Settings in System Settings (from the
Additional Functions screen) is set to 'On', received documents are stored in
memory instead of being printed.
Follow the procedure below to manually switch the machine into the Memory Lock
mode if the Memory Lock timer has not been set, or of you want to switch the
machine into the Memory Lock mode before the timer automatically activates the
Memory Lock mode.
2
IMPORTANT
No more documents can be received in memory if any of the following is true: (The
numbers below may vary depending on the remaining capacity of the hard disk.)
- When a total of 2,000 documents have been stored in any or all of the inboxes
- When a total of 8,000 pages have been stored in any or all of the inboxes
- When a total of 32 or more received documents or reports are waiting to be printed
while the machine is out of the correct sized paper.
NOTE
•
To set the Memory Lock mode, press
(Additional Functions)
➞
[System Settings]
➞
[Communications Settings] [Memory Lock Settings]
➞
➞
set the Memory Lock mode to
•
If the Memory Lock RX mode is set to 'On', <Memory Lock> appears on the Fax Basic
Features screen. If you set the Memory Lock RX mode with the Forward mode,
<Forward> appears on the Fax Basic Features screen.
1
Press [Special Features] ➞ [RX Mode] .
Receiving Print Jobs and Fax Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
2-31
2
Press [On] under <Memory Lock>.
2
If the Memory Lock timer is set, the specified day of the week and time are
If an RX password has been set, enter the password using
-
(numeric keys)
If you want to cancel the Memory Lock mode, press [Off].
3
Press [Done] repeatedly until the Fax Basic Features screen
appears.
During reception, the transaction number and information related to the sender
are displayed on the touch panel display.
NOTE
•
•
Use the System Monitor screen to check if there are any received documents
4-8.)
Receiving Print Jobs and Fax Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
2-32
Forwarding Received Documents
If Forward Settings in Communications Settings in System Settings (from the
Additional Functions screen) is set to 'On', received documents are forwarded to a
destination that has been registered in the machine beforehand.
Follow the procedure below to manually place the machine in the Forward mode if
the Forward timer has not been set, or if you want to place the machine in the
Forward mode before the timer automatically activates the Forward mode.
2
NOTE
•
To set the Forward mode, press
(Additional Functions)
➞
[System Settings]
➞
[Communications Settings] [Forward Settings] set the Forward mode to 'On'. (See
➞
•
If you set the Forward mode, <Forward> appears on the Fax Basic Features screen.
1
Press [Special Features] ➞ [RX Mode] .
2
Press [On] under <Forward>.
If the Forward timer is set, the specified day of the week and time are displayed.
If an RX password has been set, enter the password using
-
(numeric keys)
If you want to cancel the Forward mode, press [Off].
Receiving Print Jobs and Fax Documents
2-33
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press [Done] repeatedly until the Fax Basic Features screen
appears.
The received documents are forwarded to the specified destination.
NOTE
You can set whether to print received documents that have been forwarded to this
2
Receiving Print Jobs and Fax Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
2-34
Available Paper Sizes
When received documents are printed, they are printed from the paper drawer that
has the same size paper as the received document. If paper of the correct size is
not available, the machine automatically selects a different paper size in the
following order. The paper size is automatically selected in the same order, even if
paper runs out during printing.
2
■ Available Paper Sizes for Received Documents
11" x 17" ➞ LGL*1 ➞ STMTR x 2
11" x 17" originals
LGL originals
LGL ➞ LTR x 2 ➞ STMTR x 2 ➞ 11" x 17"
LTR ➞ LGL ➞ STMTR x 2 ➞ 11" x 17"
STMTR ➞ LTR ➞ LGL ➞ 11" x 17"
LTR originals
STMT originals
*1 Received documents are automatically reduced before being printed on the paper size indicated.
IMPORTANT
Received documents can be printed on the following paper sizes and paper types:
Paper Sizes: 11" x 17", LGL, LTR, LTRR, or STMTR
Paper Types: plain, recycled, or color
NOTE
•
You can specify one or all paper drawers specifically for the Fax function. The default
setting is 'On', except for the stack bypass. (See Chapter 4, "Customizing Settings," in
the Reference Guide.)
•
You can set the machine to reduce received documents from 75% to 97% in 1%
increments if the document is larger than any of the available paper sizes. (See
•
•
You can set the machine to print received documents on both sides of the paper. (See
•
•
You can print two received documents of the same paper size on a single sheet of paper.
Received documents are output face down, in the order in which the pages are received.
Available Paper Sizes
Download from Www.Somanuals.com. All Manuals Search And Download.
2-35
2
Available Paper Sizes
Download from Www.Somanuals.com. All Manuals Search And Download.
2-36
3
Special Fax Functions
CHAPTER
This chapter describes special fax sending and receiving features.
Using a Memory Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Setting the Sender's Name as the Terminal ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Faxing Two-Sided Originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19
Preset Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-29
Zoom by Percentage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-31
Using a PIN Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35
Setting the PIN Code Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38
Fax Information Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-41
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Delaying a Send Job
The Delayed Send mode enables you to store a send job in memory, and have it
sent at a later time.
NOTE
•
You can reserve up to 64 fax jobs for delayed sending. However, the actual number of
jobs that can be reserved may be fewer than 64, if multiple documents are being sent at
the same time.
3
•
The number of delayed send jobs which you can reserve may also be reduced if there
are other jobs with no Delayed Send settings, or if you select a group destination which
includes several destinations with the Delayed Send mode.
•
•
Once the delayed documents are sent, the documents are automatically deleted from
memory.
You can check the status or cancel the transmission of jobs for which a preset send time
"Checking/Changing the Fax Status.")
1
Place your originals ➞ press [Special Features].
NOTE
Delaying a Send Job
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2
2
3
Press [Delayed TX].
3
Enter the send time using
-
(numeric keys).
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
If you set a time earlier than the current time, the document will be sent at that
time on the next day.
NOTE
If you make a mistake when entering the send time, press
entry enter another four digit number.
(Clear) to clear your
➞
Delaying a Send Job
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3
4
5
Press [OK] ➞ [Done].
The display returns to the Fax Basic Features screen.
Specify the destination ➞ press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The document is stored in memory, and then sent to the specified destination at
the specified time.
3
NOTE
•
•
•
To cancel a delayed send job, press [Special Features] [Delayed TX] [Cancel].
➞
➞
To cancel all settings and return the machine to the Standard mode, press
(Reset).
•
You can also cancel a delayed send job from the System Monitor screen. (See
Delaying a Send Job
Download from Www.Somanuals.com. All Manuals Search And Download.
3-4
Memory Boxes
Memory boxes enable you to store scanned or received documents. The main
advantage to using memory boxes for sending and receiving is that you can handle
all transmissions with ITU-T passwords and subaddresses.
There are three types of memory boxes: Confidential, Relay, and Batch Sending.
3
NOTE
For instructions on setting up a Confidential, Relay, or Batch Sending Memory Box, see
■ Confidential Memory Box
A Confidential Memory Box is used to receive and store confidential documents. The
sender of the confidential document must specify the subaddress and RX password of the
target Confidential Memory Box that matches the subaddress/RX password that has been
registered in the other party's machine.
Sender
Recipient
Confidential Memory Box
The subaddress and password set in the Confidential
Memory Box of the destination are specified when sending.
A password is necessary
to print the document.
NOTE
•
If you want to use a Confidential Memory Box, you must first set one up, and inform the
sender of the subaddress and RX password of the Confidential Memory Box.
•
•
Setting an RX password is optional.
For information on setting up a Confidential Memory Box, see "Confidential Memory
Memory Boxes
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Relay Memory Box
Relay Memory Box is used to send documents that have been received in this machine to
several destinations.
When you use a Relay Memory Box, a remote fax machine sends a document over a long
distance to another fax machine called the relay unit (for example, this machine). After the
relay unit receives the document, it automatically sends the document to several other fax
machines. In this way, you can send a document to several fax machines within the same
locality with only one long distance transmission. This enables you to save on
communication costs that would otherwise be incurred.
You can specify the time at which you want to send documents from the relay machine,
thus enabling you to select a time period when communication costs are low, or when
telephone lines are not busy.
3
Time when transmission
costs are low, etc.
Branch 1
Sequential transmission
The subaddress and
password set in the Relay
Memory Box of the
at the specified time
Branch 2
destination are specified
when sending.
Branch 3
Relay Memory Box
NOTE
•
If you want to use a Relay Memory Box, you must first set one up, and inform the remote
sender of the subaddress and RX password of the Relay Memory Box.
•
•
•
Setting an RX password is optional.
The subaddress and RX password stored in the Address Book are ignored.
Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
3-6
■ Batch Sending Memory Box
A Batch Sending Memory Box is used to send documents that's are not urgent to specific
destinations at a specified time.
Batch sending enables you to send several documents at one time, reducing the time it
takes to send the documents and transmission costs. You can reduce transmission costs
even further by setting the machine to send the documents at a time when telephone
rates are lower.
The stored
documents are sent
all together at
predetermined
times every day.
3
Batch Sending Memory Box
Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
3-7
Using a Memory Box
A memory box enables you to set up an ITU-T subaddress and password, and use
advanced features, such as confidential sending and relay sending, with another
fax machine that supports ITU-T standard subaddress/password transactions.
A memory box is a location in the memory where you can store scanned or
received documents for printing or transmitting to other destinations.
3
IMPORTANT
It is necessary to preset a memory box according to its use, then register the necessary
items including the password, subaddress, and RX password.
NOTE
To set up a memory box, press (Additional Functions) ➞[Custom Fax Settings] ➞[File
Settings]
➞
Scanning Originals
Follow the procedure below to scan your originals into the specified memory box.
1
Place your originals ➞ press [Special Features].
NOTE
Using a Memory Box
Download from Www.Somanuals.com. All Manuals Search And Download.
3-8
2
Press [Memory Inbox].
3
The Memory Inbox screen is displayed.
3
Select the desired memory box number.
If the desired memory box is not displayed, press [▼] or [▲] to scroll through the
list.
If you enter the memory box number using
-
(numeric keys), make sure to
enter a two digit number ➞ press [OK].
If you make a mistake when entering the memory box number, press
enter the correct number.
(Clear) ➞
If the memory box has been set with a password, enter the password using
(numeric keys) ➞ press [OK].
-
Using a Memory Box
Download from Www.Somanuals.com. All Manuals Search And Download.
3-9
NOTE
•
•
•
If a document is stored in a memory box, that memory box is displayed with the
documents icon ( ).
If a memory box is set with a password, a locked icon ( ) is displayed next to the
icon of that memory box.
If you make a mistake when selecting a memory box, press [Done]
correct memory box.
➞
select the
4
5
Press [Scan].
3
Specify the desired scan settings.
Using a Memory Box
Download from Www.Somanuals.com. All Manuals Search And Download.
3-10
You can specify the following scan settings when you scan originals into a
memory box:
on p. 2-2.)
6
7
Press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
3
Scanning starts.
The document is stored in the selected memory box, and will be sent according to
the memory box settings.
NOTE
To cancel scanning, press [Cancel] on the touch panel display, or press
on the control panel.
(Stop)
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Printing and Erasing Documents
You can print and erase documents that are stored in a memory box.
NOTE
If you print a document stored in the Relay Memory Box, it is erased.
1
Press [Special Features] ➞ [Memory Inbox].
The Memory Inbox screen is displayed.
Using a Memory Box
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select the desired memory box number containing the
documents you want to print or erase.
3
If the desired memory box is not displayed, press [▼] or [▲] to scroll through the
list.
If you enter the memory box number using
-
(numeric keys), make sure to
enter a two digit number ➞ press [OK].
If you make a mistake when entering the memory box number, press
enter the correct number.
(Clear) ➞
If the memory box has been set with a password, enter the password using
-
(numeric keys) ➞ press [OK].
NOTE
•
•
•
If a document is stored in a memory box, that memory box is displayed with the
documents icon ( ).
If a memory box is set with a password, a locked icon ( ) is displayed next to the
icon of that memory box.
If you make a mistake when selecting a memory box, press [Done]
correct memory box.
➞
select the
Using a Memory Box
Download from Www.Somanuals.com. All Manuals Search And Download.
3-12
3
Select the document that you want to print or erase.
3
If the desired document is not displayed, press [▼] or [▲] to scroll through the
list.
NOTE
•
•
To cancel a selection, press the selected document again.
You can select only one document to print or erase at a time.
● To print a document:
❑ Press [Print] ➞ [Yes].
If you do not want to print the selected document, press [No].
The selected document is printed.
Using a Memory Box
Download from Www.Somanuals.com. All Manuals Search And Download.
3-13
● To erase a document:
❑ Press [Erase] ➞ [Yes].
3
If you do not want to erase the selected document, press [No].
The selected document is erased.
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Using a Memory Box
Download from Www.Somanuals.com. All Manuals Search And Download.
3-14
Setting the Sender's Name as the Terminal ID
If a sender's name is stored and selected, the sender's name is printed in the
sender information area on the document, instead of the unit's name.
You can register up to 99 sender names. For more information on registering the
3
IMPORTANT
If TX Terminal ID in User Settings in Custom Fax Settings (from the Additional Functions
screen) is set to 'Off', the sender's name is not printed on the recording paper of the
recipient's machine, even if you have registered the sender's name. If you want to print
1
Place your originals ➞ press [Special Features] ➞ [Sender's
Names (TTI)].
NOTE
Setting the Sender's Name as the Terminal ID
Download from Www.Somanuals.com. All Manuals Search And Download.
3-15
2
Select the sender's name ➞ press [OK].
3
If the desired sender name is not displayed, press [▼] or [▲] to scroll to the
desired name.
You can also enter and specify the number of the sender's name using
-
(numeric keys).
If you select [00] from the Sender's Names list, the stored unit's name is
The selected mode is set.
3
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Setting the Sender's Name as the Terminal ID
Download from Www.Somanuals.com. All Manuals Search And Download.
3-16
Changing the Reception Mode
The machine automatically receives and prints documents. However, if you use the
Memory Lock or Forward mode, you can set the machine to receive a document
temporarily in memory or forward it to another machine at a specified time.
The set RX mode appears on the touch panel display, and remains active until a
different mode is set. There are two RX modes:
3
■ Memory Lock:
This mode stores received documents in memory without printing them. When the
machine is in the Memory Lock mode, documents are stored in memory, and printed
when the Memory Lock mode is canceled or the preset Memory Lock mode time elapses.
Received documents that are stored in memory can be forwarded to another fax machine.
NOTE
•
•
To set the Memory Lock mode, press
[Communications Settings] [Memory Lock Settings]
(Additional Functions)
➞
[System Settings]
➞
➞
➞
[On]. (See "Saving Received
Set a password to limit users from setting/canceling the Memory Lock mode. You can
also set the machine to switch to the Memory Lock mode at certain times every day or on
■ Forward:
This mode forwards received documents to registered destinations.
NOTE
•
•
•
To set the Forward mode, press
[Communications Settings] [Forward Settings]
(Additional Functions)
➞
[System Settings]
➞
➞
➞
[On]. (See "Automatic Forwarding of
Set a password to limit users from setting/canceling the Forward mode. You can also set
the machine to automatically switch to the Forward mode at certain times every day and
Documents received in a memory box are not forwarded.
Changing the Reception Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
3-17
1
2
Press [Special Features] ➞ [RX Mode].
3
Select [On] or [Off] for <Memory Lock> and/or <Forward>.
If a password has been set for the Memory Lock or Forward mode, enter the
password using
-
(numeric keys) ➞ press [OK].
The screen returns to the RX Mode screen.
NOTE
For instructions on setting or changing the password for the Memory Lock or
3
Press [Done] repeatedly until the Fax Basic Features screen
appears.
The selected mode is set.
Changing the Reception Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
3-18
Faxing Two-Sided Originals
You can set the machine to automatically turn over two-sided originals that are
placed in the feeder, and scan each side separately.
IMPORTANT
•
•
The 2 1-sided mode is available only if the optional Feeder (DADF-N1) is attached.
The 2 1-sided mode cannot be used with the Document Size (Other Size or Long
Original) or Direct Sending mode.
3
•
When you are scanning originals with a horizontal (landscape) orientation, such as
LTRR, make sure to place them horizontally into the feeder. If these originals are placed
vertically, the back sides of these originals are scanned upside down.
1
Place your originals into the feeder.
NOTE
2
Press [Special Features] ➞ [2 1-sided].
3
Press [Done].
The selected mode is set, and the display returns to the Fax Basic Features
screen.
Faxing Two-Sided Originals
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Specify the destination ➞ press
(Start).
For more information on specifying the destination, see "Dialing Methods," on p.
2-16.
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
•
•
To cancel this setting, press [Special Features]
➞
[2 1-sided].
To cancel all settings and return the machine to the Standard mode, press
(Reset).
3
Faxing Two-Sided Originals
Download from Www.Somanuals.com. All Manuals Search And Download.
3-20
Document Size
You can manually specify the document size when the machine cannot detect the
paper size automatically, such as when scanning transparencies.
IMPORTANT
•
You cannot select [Auto] when scanning the following types of originals. Specify the size
of these documents manually.
3
- Nonstandard size originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- STMT or STMTR originals that are placed on the platen glass
•
•
•
•
When using Direct Sending to send a fax, if you place the originals into the feeder, the
Document Size setting you specify is disabled.
If the original is placed in the feeder, you cannot scan by selecting [Other Size] in
Document Size.
If you select [Long Original], place your originals into the feeder. You cannot specify the
size of a long strip original that is placed on the platen glass.
If you select [Other Size], you cannot select [Stamp].
NOTE
The default setting is 'Auto'.
Document Size
Download from Www.Somanuals.com. All Manuals Search And Download.
3-21
Specifying the Document Size
1
Place your originals.
NOTE
2
Press [Special Features] ➞ [Document Size].
3
3
Select the document size.
● If you want to scan a standard document size:
❑ Select the desired document size.
Document Size
Download from Www.Somanuals.com. All Manuals Search And Download.
3-22
NOTE
•
•
To select an A or B series paper size, press [A/B-size].
If you want to scan originals longer than 17" (432 mm), press [Long Original]. The
maximum length of originals that you can scan is 24 7/8" (630 mm).
● If you want to scan a registered document size:
❑ Press [Other Size].
3
❑ Press [Registered Size 1] or [Registered Size 2] ➞ press [OK].
NOTE
•
•
•
To select a registered document size, you must register the document size
The registered document size is displayed on top of the key in which it is
registered.
If you scan a registered document size, the scanned image is not rotated
automatically.
Document Size
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press [OK] ➞ [Done].
3
The selected document size is set, and the display returns to the Fax Basic
Features screen.
5
Specify the destination ➞ press
(Start).
For more information on specifying the destination, see "Dialing Methods," on p.
2-16.
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
•
•
To cancel this setting, press [Special Features]
➞
[Document Size]
➞
[Cancel].
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Document Size
Download from Www.Somanuals.com. All Manuals Search And Download.
3-24
3
4
Press [Register Size].
3
Press [Registered Size 1] or [Registered Size 2] ➞ press [-] or
[+] to specify the document size.
❑ Press [X] (horizontal axis) ➞ press [-] or [+] to specify a value.
❑ Press [Y] (vertical axis) ➞ press [-] or [+] to specify a value.
❑ Press [OK].
The document size is registered, and the display returns to the Other Size
screen.
The registered document size is displayed on top of the key in which it is
registered.
Document Size
Download from Www.Somanuals.com. All Manuals Search And Download.
3-26
NOTE
•
If you register a new document size in a key that already has a document size
stored in it, the new document size overwrites the previously registered document
size.
•
If you scan a registered document size, the scanned image is not rotated
automatically.
•
•
You can also use
-
(numeric keys), and
(Clear) to clear your entries.
If you enter a value outside the setting range, [OK] is grayed out and cannot be
selected. Enter an appropriate value.
5
Press [Cancel] ➞ [OK] ➞ [Done].
3
The display returns to the Fax Basic Features screen.
NOTE
Pressing [Cancel]
selected key ([Registered Size 1] or [Registered Size 2]), but does not activate it. If
you press [OK] [OK] [Done], the new document size is stored in the selected
key ([Registered Size 1] or [Registered Size 2]), and activated at the same time.
➞
[OK]
➞
[Done] only stores the new document size in the
➞
➞
Document Size
Download from Www.Somanuals.com. All Manuals Search And Download.
3-27
Changing the Zoom Ratio
You can set the machine to adjust the zoom ratio automatically, or you can specify
the zoom ratio manually before scanning the original.
The following two types of zoom ratio settings are available.
IMPORTANT
3
The maximum size of an image that you can send at 600 x 600 dpi resolution is 11" x 17".
If the image exceeds this size, it may be cut off.
NOTE
•
Even though you specify the size of the document you are sending, it may be printed on
different size paper depending on the recipient's machine.
•
To set the zoom ratio to 100%, press [Direct].
■ Preset Zoom
The machine offers you a variety of preset zoom ratios to reduce or enlarge standard size
originals to another standard record size.
• Reduction
The available preset reduction zoom ratios are:
- LGL ➞ LTR (78%)
- 11" x 17" ➞ LGL or 11" x 15" ➞ LTR (73%)
- 11" x 17" ➞ LTR (64%)
- 11" x 17" ➞ STMT (50%)
• Enlargement
The available preset enlargement zoom ratios are:
- STMT ➞ 11" x 17" (200%)
- LTR ➞ 11" x 17" (129%)
- LGL ➞ 11" x 17" (121%)
Changing the Zoom Ratio
3-28
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Zoom by Percentage
You can reduce or enlarge originals by any zoom ratio in 1% increments. The same zoom
ratio is used for the horizontal (X) and vertical (Y) axes.
Scanned Data
Original
CITY
3
Preset Zoom
The machine offers you a variety of preset zoom ratios to reduce or enlarge
standard size originals to another standard record size.
1
2
Place your originals.
NOTE
Press [Special Features] ➞ [Zoom TX].
Changing the Zoom Ratio
3-29
Download from Www.Somanuals.com. All Manuals Search And Download.
3
To reduce the original image, select a preset reduction ratio.
To enlarge the original image, select a preset enlargement
ratio. Following your selection, press [Done] ➞ [Done].
Enlargement
Ratios
Reduction
Ratios
3
The selected mode is set, the display returns to the Fax Basic Features screen,
and the selected zoom ratio is displayed.
4
Specify the destination ➞ press
(Start).
For more information on specifying the destination, see "Dialing Methods," on p.
2-16.
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
•
•
To return the ratio to 100%, press [Direct].
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Changing the Zoom Ratio
Download from Www.Somanuals.com. All Manuals Search And Download.
3-30
Zoom by Percentage
You can reduce or enlarge originals by any zoom ratio in 1% increments. Any ratio
from 50% to 200% can be set. The same zoom ratio is used for the horizontal (X)
and vertical (Y) axes.
1
Place your originals.
NOTE
3
2
3
Press [Special Features] ➞ [Zoom TX].
Press [-] or [+] to set the zoom ratio ➞ press [Done] ➞ [Done].
You can also use
clear your entry.
-
(numeric keys) to enter the value, and
(Clear) to
You can change the value by pressing [-] or [+], even if you have entered the
value using (numeric keys).
-
The selected mode is set, the display returns to the Fax Basic Features screen,
and the specified zoom ratio is displayed.
NOTE
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
Changing the Zoom Ratio
Download from Www.Somanuals.com. All Manuals Search And Download.
3-31
4
Specify the destination ➞ press
(Start).
For more information on specifying the destination, see "Dialing Methods," on p.
2-16.
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
3
•
•
To return the ratio to 100%, press [Direct].
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Changing the Zoom Ratio
Download from Www.Somanuals.com. All Manuals Search And Download.
3-32
Sending with a Subaddress
You can send or receive documents with ITU-T standard subaddresses and
passwords (ITU-T is a committee within the International Telecommunications
Union, established to set communications standards).
To send or receive documents with the subaddresses and passwords successfully,
the subaddresses and passwords on the sending and receiving fax machines must
match.
3
IMPORTANT
If a subaddress is specified, you cannot use the Auto Redial mode.
NOTE
•
You can register a destination with a subaddress and password in a one-touch speed
5-26.)
•
Passwords are optional.
1
Place your originals ➞ make sure the machine is ready to
send.
NOTE
2
Press [Subaddress].
Sending with a Subaddress
3-33
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Use
and password.
-
(numeric keys), , and
to enter the subaddress
❑ Press [Subaddress] ➞ enter the recipient's subaddress.
❑ Press [Password] ➞ enter the recipient's password.
❑ Press [OK].
3
You can enter up to 20 digits for both the subaddress and password.
Press [Space] to insert a space.
Press [Backspace] to delete the last digit you entered.
If the recipient did not set a password for the target subaddress, you do not
need to enter a password.
The selected mode is set, and the display returns to the Fax Basic Features
screen.
NOTE
You can press
(Clear) to clear your entries.
4
Specify the destination ➞ press
(Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
If you are sending to a remote machine using a one-touch speed dialing key or
coded speed dialing code in which a subaddress and password are registered, the
registered subaddress and password are used.
Sending with a Subaddress
Download from Www.Somanuals.com. All Manuals Search And Download.
3-34
Using a PIN Code
The PIN (Personal Identification Number) code prevents unauthorized personnel
from making calls. To protect privileged access to the telephone lines, only
authorized users are entrusted with the PIN codes for daily operations. Some PBX
(Private Branch Exchange) systems require that a PIN code be entered when
dialing a number to make a call or send a document by fax. Depending on the
requirements of the PBX system, the PIN code may be entered either before the
number as a prefix, or after the number as a suffix.
3
Setting PIN Code Access
If your PBX requires a PIN code to get an outside line, your machine can be set to
prompt the user to enter the PIN code before dialing.
NOTE
•
If PIN Code Access is set to 'On', the machine automatically displays a screen prompting
you to enter the PIN code when you press
(Start).
•
The default setting is 'Off'.
1
Press
(Additional Functions) ➞ [System Settings].
Using a PIN Code
3-35
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press [Communications Settings].
3
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
3
Press [▼] or [▲] until [PIN Code Access] appears ➞press [PIN
Code Access].
Using a PIN Code
Download from Www.Somanuals.com. All Manuals Search And Download.
3-36
4
Press [On].
3
If you do not want to set PIN code access, press [Off] ➞ [OK] ➞ proceed to step
6.
5
Select the desired type of PIN code ➞ press [OK].
Details of each item are shown below.
[Option]: Select if your PBX requires a PIN code depending on the destination. If
PIN Code Access is set to 'Option', [PIN Code] appears on the Fax
Basic Features screen.
[Prefix]: Select if your PBX always requires you to enter a PIN code before the
destination.
[Suffix]: Select if your PBX always requires you to enter a PIN code after the
destination.
The selected mode is set.
Using a PIN Code
Download from Www.Somanuals.com. All Manuals Search And Download.
3-37
6
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Setting the PIN Code Position
Follow this procedure to set the PIN code position.
NOTE
You can only set the PIN code position if PIN Code Access is set to 'Option'. (See
3
1
2
Place your originals.
NOTE
Begin entering the fax number using
press [PIN Code] once in the desired position ➞ continue
-
(numeric keys) ➞
entering the rest of the fax number.
<C> is displayed on the screen after you press [PIN Code].
NOTE
•
•
The PIN code position depends on the PBX system.
[PIN Code] can be pressed either before the destination, after the destination, or
between the numbers of the destination.
•
For security, PIN codes are not displayed while dialing (only <C> appears), and
they do not appear in printed activity reports.
Using a PIN Code
Download from Www.Somanuals.com. All Manuals Search And Download.
3-38
3
Press
-
(Start) ➞ enter the PIN code using
(numeric keys) ➞ press [OK].
3
NOTE
The PIN code appears as asterisks (*******) on the Enter PIN Code screen.
Dialing with a PIN Code
Follow the procedure below when dialing with a PIN code in the 'Prefix' or 'Suffix'
position.
1
Place your originals ➞ make sure the machine is ready to
send.
NOTE
Using a PIN Code
3-39
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Enter the fax number using
(Start).
-
(numeric keys) ➞ press
3
Enter the PIN Code using
-
(numeric keys) ➞ press [OK].
NOTE
The PIN code appears as asterisks (*******) on the Enter PIN Code screen.
Using a PIN Code
Download from Www.Somanuals.com. All Manuals Search And Download.
3-40
Fax Information Services
Many fax information services for banks, airline reservations, hotel reservations,
etc., require tone dialing for their services. If your machine is connected to a rotary
pulse telephone line, follow the procedure below to temporarily set the machine for
tone dialing.
NOTE
3
When you use fax information services, you cannot use the Redial mode.
1
Press [On-hook] ➞ enter the number of the fax information
service using
-
(numeric keys).
IMPORTANT
If the optional Card Reader-C1 is attached, the line will be disconnected if you
press [On-hook], and then remove the control card while the line is engaged.
Fax Information Services
3-41
Download from Www.Somanuals.com. All Manuals Search And Download.
● If you press [One-touch Dialing]:
❑ Select the desired one-touch button ➞ press [Done].
3
One-touch buttons are assigned a three digit number. To specify a destination
using a one-touch button's three digit number, enter the three digit number
using
-
(numeric keys).
For more information on specifying destinations using the one-touch buttons,
2
When your call is answered and you hear the recorded
message of the information service, press [Tone].
If you are already using this machine with tone dialing, this step is not necessary.
The volume of the dial tone can be adjusted by pressing [▼] or [▲].
Fax Information Services
Download from Www.Somanuals.com. All Manuals Search And Download.
3-42
After you press [Tone], a <T> appears on the touch panel display.
3
3
Enter the numbers requested by the information service using
-
(numeric keys), , and
.
1
4
7
2
5
8
0
3
6
9
NOTE
If you require more information about the service, contact the company providing
the service.
Fax Information Services
Download from Www.Somanuals.com. All Manuals Search And Download.
3-43
4
Press [RX Start] if you require a faxed copy of the information.
3
If you do not require a faxed copy of the information, press [End].
Fax Information Services
Download from Www.Somanuals.com. All Manuals Search And Download.
3-44
Checking/Changing the Fax
4
Status
CHAPTER
This chapter describes how to check/change the status of send and receive jobs.
Checking Fax Job Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Erasing Received Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking/Changing the Status of Fax Jobs
This section describes how to check/change the status of fax jobs.
NOTE
•
•
If the optional iR Security Kit is activated by registering a license key and Job Log Display
in System Settings (from the Additional Functions screen) is set to 'Off', [Log] is not
displayed on the System Monitor screen.
The maximum number of jobs that are displayed is:
- TX Job Status screen:
- Log screen:
64 jobs
4
100 jobs
Checking Fax Job Details
You can check the detailed information on any fax job, such as the destination and
the date and time the job was specified.
1
Press [System Monitor].
Checking/Changing the Status of Fax Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-2
2
3
Press [Fax].
4
Select [TX Job Status] or [Log].
Checking/Changing the Status of Fax Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-3
● If you select [TX Job Status]:
❑ Select a job whose detailed information you want to check ➞ press [Details].
4
If the job that you want to select is not displayed, press [▼] or [▲] to scroll to
the desired job.
● If you select [Log]:
❑ Select the job whose detailed information you want to check ➞ press [Details].
If the job that you want to select is not displayed, press [▼] or [▲] to scroll to
the desired job.
Checking/Changing the Status of Fax Jobs
4-4
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Check the details of the selected job.
4
If you selected a job with multiple destinations, press [Broadcast List] ➞ check
the status of each destination ➞ press [Done].
NOTE
You can erase documents that have been received in memory from the RX Job
Status screen. If the memory is full, the machine cannot receive any documents. It
is recommended that you erase unnecessary documents beforehand.
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Checking/Changing the Status of Fax Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5
Printing the TX Job Status/Log
You can print the TX Job Status/Log which includes the transmission time,
destination, job number, transmission mode, number of pages, and transmission
result.
1
2
Press [System Monitor] ➞ [Fax].
Press [Log] ➞ [Print List].
4
NOTE
The TX Log can be printed only if 11" x 17", LGL, LTR, or LTRR paper (plain,
recycled, or color paper) is loaded in the paper sources whose settings in Fax in
Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions
screen) are set to 'On'. (See Chapter 4, "Customizing Settings," in the Reference
Guide.)
Checking/Changing the Status of Fax Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-6
3
Press [Yes].
4
To cancel printing, press [No].
The TX Activity Report is printed.
4
Press [Done].
The display returns to the Fax Basic Features screen.
Checking/Changing the Status of Fax Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-7
Checking/Changing the Status of Receive Jobs
You can check the details of received documents stored in memory, as well as the
status of receive jobs.
NOTE
The receive job log (Activity Report (RX)) screen displays up to 100 jobs.
Checking Receive Job Details
4
You can check detailed information on any received job, such as the destination
and the date and time the job was received.
1
Press [System Monitor].
Checking/Changing the Status of Receive Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-8
2
3
Press [Fax].
4
Press [RX Job Status].
Checking/Changing the Status of Receive Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-9
4
Select the job whose detailed information you want to check ➞
press [Details].
4
If the job that you want to select is not displayed, press [▼] or [▲] to scroll to
the desired job.
5
6
Check the details of the selected job.
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Checking/Changing the Status of Receive Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-10
Erasing Received Documents
You can erase documents that have been received in memory from the RX Job
Status screen. If the memory is full, the machine cannot receive any more
documents. It is recommended that you erase unnecessary documents as often
possible.
1
2
3
Press [System Monitor] ➞ [Fax].
4
Press [RX Job Status].
Select the job that you want to erase ➞ confirm the details of
the job ➞ press [Erase].
If the job that you want to erase is not displayed, press [▼] or [▲] to scroll to the
desired job.
You can select and cancel a document that is currently being received.
You cannot erase a document that is being printed.
If you select a document that is being received, [Erase] changes to [Cancel],
enabling you to cancel receiving the document.
Checking/Changing the Status of Receive Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-11
4
Press [Yes].
4
If you do not want to erase the document, press [No].
The message <Erased.> appears for approximately two seconds on the touch
panel display.
The selected document is erased.
5
Press [Done].
The display returns to the Fax Basic Features screen.
Forwarding Received Documents
You can forward received documents that have been stored in memory from the
System Monitor screen.
1
2
Press [System Monitor] ➞ [Fax].
Press [RX Job Status].
Checking/Changing the Status of Receive Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-12
3
Select the job that you want to forward ➞ press [Details].
4
If the job that you want to forward is not displayed, press [▼] or [▲] to scroll to
the desired job.
4
Check the job details ➞ press [Forward].
Checking/Changing the Status of Receive Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-13
5
Specify the forwarding destination ➞ press [Start].
4
The selected document is forwarded to the specified destination.
IMPORTANT
If Restrict New Addresses in System Settings (from the Additional Functions
screen) is set to 'On' when the machine is in the System Management mode, you
cannot specify a forwarding destination using
-
(numeric keys).
6
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Checking/Changing the Status of Receive Jobs
Download from Www.Somanuals.com. All Manuals Search And Download.
4-14
5
Customizing Fax Settings
CHAPTER
This chapter describes how to store and change the default settings of the Fax function to suit
your needs.
Custom Fax Settings Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Printing the TX Terminal ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Storing One-Touch Speed Dialing Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-19
One-Touch Speed Dialing Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-26
Storing Group Destinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-33
Transmission Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41
ECM Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-41
Pause Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-43
Auto Redial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-45
ECM Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-50
Printing Received Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-54
Two-Sided Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-61
Batch Sending Memory Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-82
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Custom Fax Settings Table
The following items can be stored or set in Custom Fax Settings from the Additional
Functions screen.
■ Custom Fax Settings
Applicable
Item
Settings
Page
User Settings
All Modes (No Settings*)
20 digits maximum
Standard Key Settings
Unit Telephone #
Unit Name
p. 5-4
5
24 characters maximum
Sender's Names (TTI) 01 to 99, Register, Erase
On*1:
Option:
Printing Position:
Inside, Outside*1
Display Destination Name:
On*1, Off
TX Terminal ID
p. 5-7
Telephone # Mark:
FAX*1, TEL
Off
1 to 9; 5*
Density Control
Tel Line Type
p. 5-11
p. 1-12
Pulse, Tone*1
Alarm Volume: 0 to 8; 4*1
Monitor Volume: 0 to 8; 4*1
Volume Control
p. 5-12
p. 5-14
Standard Settings
TX Settings
ECM TX
Store, Initialize
On*1, Off
p. 5-41
p. 5-43
1 to 15 seconds; 2 seconds*1
Pause Time
*1 Indicates the default setting.
Custom Fax Settings Table
Download from Www.Somanuals.com. All Manuals Search And Download.
5-2
■ Custom Fax Settings Table Continued
Applicable
Page
Item
Settings
Option:
On*1:
Redial Times:
1 to 10 times; 2 times*1
Redial Interval:
2 to 99 minutes; 2 minutes*1
Auto Redial
p. 5-45
Off
Printer Settings
Switch A: On*1, Off
Switch B: On*1, Off
Switch C: On*1, Off
Switch D: On*1, Off
Select Cassette
p. 5-54
p. 5-58
5
On*1
RX Reduction:
Auto*1, Fixed Reduction,
Reduce %
Receive Reduction
Reduce Direction:
Vertical & Horizontal,
Vertical Only*1
Off
On, Off*1
On, Off*1
Two-sided Print
2 On 1 Log
p. 5-61
p. 5-63
Register, Erase, Group
Destination
[001] to [200]
Index
Register Destinations
p. 5-26
001 to 200
RX Settings
On*1, Off
On, Off*1
ECM RX
p. 5-50
p. 5-52
Received Page Footer
File Settings
Memory Inboxes Settings Register, Erase
*1 Indicates the default setting.
NOTE
For instructions on setting the modes not described in this manual, refer to the other
Custom Fax Settings Table
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
User Settings
This section describes the settings that can be made when you press [User
Settings] on the Additional Functions screen. These settings include important
features, such as registering a standard key, or attaching a Transmission Terminal
ID, which includes the telephone number and the date and time that prints on the
documents you send. You can also set alarms and the scan density.
Registering the Standard Key
You can store frequently used fax settings in a Standard key, which is displayed on
the Fax Basic Features screen for your convenience. The settings that can be
selected include the Delayed TX, Sender's Names, Memory Box, and Zoom TX
modes.
5
NOTE
The default setting is 'No Settings'.
1
Press
(Additional Functions) ➞ [Custom Fax Settings].
User Settings
5-4
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press [User Settings].
Press [Standard Key Settings].
5
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
User Settings
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press [▼] or [▲] to display the desired setting group ➞ select
the desired setting ➞ press [OK].
The selected mode is set.
NOTE
5
•
To cancel a Standard Key setting, press [No Settings]
until the Fax Basic Features screen appears.
➞
[OK]
➞
[Done] repeatedly
•
To cancel storing the setting, press [Cancel].
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Example: The stored Standard key is displayed on the Fax Basic Features screen,
as shown below.
Standard Key
User Settings
5-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing the TX Terminal ID
The TX Terminal ID setting enables you to specify whether the sender information
is printed at the top of every document you send via fax. Information, such as your
fax number and name is printed, enabling the recipient to know who sent the
document.
IMPORTANT
In the United States, this setting must be set to 'On'. Please see "FCC (Federal
the United States.
NOTE
•
If you set TX Terminal ID to 'On', you can also set the position of the Terminal ID
information which is printed on the recipient's paper.
•
The default settings are:
5
- TX Terminal ID:
On
- Printing Position:
Outside
On
- Display Destination Name:
- Telephone # Mark:
FAX
1
Press
[User Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
User Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-7
2
3
Press [▼] or [▲] until [TX Terminal ID] appears ➞ press [TX
Terminal ID].
5
Select [On] or [Off].
User Settings
5-8
Download from Www.Somanuals.com. All Manuals Search And Download.
● If you select [On]:
❑ Press [Option].
❑ Specify [Inside] or [Outside] to select the printing position of the Terminal ID
information.
❑ Select [On] or [Off] for <Display Destination Name>.
❑ Select [FAX] or [TEL] for <Telephone # Mark>.
❑ Press [OK].
5
Printing Position
[Inside]:
The Terminal ID information is printed inside the image area on the
recipient's paper.
[Outside]: The Terminal ID information is printed outside the image area on
the recipient's paper.
Display Destination Name
[On]:
[Off]:
The destination's name is displayed in the Terminal ID information.
The destination's name is not displayed in the Terminal ID
information.
Telephone # Mark
[FAX]:
[TEL]:
"FAX" is printed before the fax number.
"TEL" is printed before the telephone number.
User Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-9
Example: If you set TX Terminal ID and Display Destination Name to 'On', the
Terminal ID information is printed on the recipient's paper as
follows:
5
The selected mode is set.
● If you select [Off]:
❑ Press [OK].
The selected mode is set.
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
User Settings
5-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Standard Density
Setting the standard density enables you to scan all of your documents with the
same density. For example, if you frequently scan documents with text or fine lines,
the setting should be towards [Dark]. However, if you frequently scan documents
containing printed images or halftones, the setting should be towards [Light].
NOTE
•
•
The resolution (sharpness of the image) does not change even if you change the density.
The default setting is in the middle (5) on a scale of 1 to 9.
1
Press
[User Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
5
2
Press [▼] or [▲] until [Density Control] appears ➞ press
[Density Control].
User Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-11
3
Press [Light] or [Dark] to set the scanning density ➞
press [OK].
The selected mode is set.
5
NOTE
To cancel this setting, press [Cancel].
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Adjusting the Alarm and Monitor Volume
You can set the volume for the alarm and monitor tones that this machine sounds
during a fax transmission.
NOTE
•
•
•
The alarm tone sounds when sending or receiving is canceled.
The monitor tone sounds when the machine connects to the recipient's fax machine.
The default setting for both the Alarm Volume and Monitor Volume is in the middle (4), on
a scale of 0 to 8.
1
Press
[User Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
User Settings
5-12
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press [▼] or [▲] until [Volume Control] appears ➞ press
[Volume Control].
5
Press [▼] or [▲] to set the Alarm Volume and Monitor Volume
➞ press [OK].
You can set the volume to any level on a scale of 0 to 8.
If you set the volume to '0', the volume is muted and no tone will sound.
The selected mode is set.
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
User Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-13
Changing the Standard Fax Settings
This mode enables you to change the standard settings for the Fax function,
including the resolution, density, image quality, direct transmission, and document
stamp modes.
NOTE
The default settings are as follows:
- Resolution:
- Density:
Standard
Standard
- Image Quality: Text
- Direct TX:
- Stamp:
No
No
5
Storing the Standard Settings
1
Press
[User Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
2
Press [▼] or [▲] until [Standard Settings] appears ➞ press
[Standard Settings].
User Settings
5-14
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press [Store].
Select [Resolution/Density/Image Quality], [Direct], or [Stamp]
➞ specify the desired settings.
5
User Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-15
● If you selected [Resolution/Density/Image Quality]:
❑ Specify the desired settings ➞ press [Done].
NOTE
•
5
For instructions on specifying the resolution, density, and image quality, see
•
•
•
To cancel setting the standard fax settings, press [Cancel].
5
6
Press [OK].
The selected mode is set.
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Initializing the Standard Settings
You can restore the Standard Settings to their default settings.
1
Press
[User Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
User Settings
5-16
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press [▼] or [▲] until [Standard Settings] appears ➞ press
[Standard Settings].
5
Press [Initialize].
User Settings
5-17
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press [Yes].
To cancel initializing the Standard Settings, press [No].
The message <Initialized.> appears for approximately two seconds on the touch
panel display.
5
The Standard settings are initialized.
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
User Settings
5-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Destinations
The telephone numbers and names of destinations that you frequently call can be
stored in one-touch speed dialing keys.
Storing One-Touch Speed Dialing Keys
You can store up to 200 destinations in one-touch buttons within the Address Book
directory.
Storing destinations in a one-touch speed dialing key enables you to easily specify
a destination when sending an original.
5
The Address Book directory contains 14 indexes, each of which can store up to 15
destinations.
IMPORTANT
Changes made to the contents of a one-touch speed dialing key while documents are
being sent or waiting to be sent (to destinations stored in that key), will not take effect
until the next time you dial that destination.
NOTE
•
If you are storing a destination in a one-touch speed dialing key, you can also set
transmission functions, such as the sending time, send speed, and subaddress, in
addition to the telephone number and name.
•
The number of a one-touch button is used as the number for coded speed dialing.
Storing Destinations
5-19
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Press
(Additional Functions) ➞ [Custom Fax Settings].
5
Press [Register Destinations].
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-20
3
4
Press [
] (Index).
Index
Select the index in which you want to store the destination.
5
If the desired index is not displayed, press [▼] or [▲] to scroll to the desired
index.
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-21
5
6
Select the one-touch speed dialing key in which you want to
store the destination.
5
Press [Register].
NOTE
•
For instructions on storing a group dialing destination, see "Storing Group
•
If you select a one-touch button that already has destinations stored in it, the
destinations are displayed.
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-22
7
Enter the fax number of the destination using
(numeric keys) ➞ press [Next].
-
Details of each item are shown below.
5
[Pause]:
Press to insert a pause of several seconds in the fax number
that you are dialing. If you insert a pause within the fax number,
the letter <p> is displayed between the numbers. If you insert a
pause at the end of a fax number, the letter <P> appears. When
dialing an overseas number, insert a pause after the country
[Tone]:
Press when you want to directly call an extension line that is
connected to a PBX (Private Branch Exchange), which accepts
only tone signals. If you press [Tone], the letter <T> appears.
Press to move the position of the cursor.
[
] [ ]:
[Backspace]:
[Space]:
[+]:
Press to delete the last number entered.
Press to insert a space between numbers.
Use to insert a country code. Press [+] after the country code,
and before the fax number.
[Option]:
Press to specify the subaddress, password, ECM TX, sending
speed, and type of call settings. These settings are optional.
For instructions on specifying the optional one-touch speed
IMPORTANT
You cannot insert a pause or a space at the beginning of a number.
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-23
NOTE
•
•
You can enter up to 120 characters for the fax number.
If you enter a pause at the end of the number, the pause is always 10 seconds
long.
•
You can press
(Clear) to clear your entry.
8
Enter the name of the destination ➞ press [Next].
5
You can enter up to 24 characters for the destination's name.
If you press [Shift], you can enter uppercase characters.
NOTE
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
.
•
The name you enter is used for the sender's information, and appears in the log to
identify the destination.
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-24
9
Enter the name that you want to appear on the one-touch
speed dialing key ➞ press [OK].
You can enter up to 12 characters for the one-touch speed dialing key's name.
If you press [Shift], you can enter uppercase characters.
The registered destination information is displayed.
5
NOTE
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
.
10 Press [Done] repeatedly until the Fax Basic Features screen
appears.
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-25
One-Touch Speed Dialing Settings
When you store a destination in a one-touch speed dialing key, you can also store
the send time, sending speed, long distance, subaddress and password, and ECM
TX settings.
■ Send Time
This mode enables you to set the time that you want a document to be sent.
■ Sending Speed
This mode enables you to set the transmission speed. The default setting is '33600 bps'. If
your document transmissions are slow in starting, this may mean that the telephone lines
in your area are in poor condition. Select a slower speed. You can select [33600 bps],
[14400 bps], [9600 bps], or [4800 bps].
■ Long Distance
This mode enables you to dial long distance numbers. Select [Long Distance (1)] if
transmission errors frequently occur when you make overseas calls (when the overseas
telephone number is registered in the Address Book). If errors persist, try selecting [Long
Distance (2)] or [Long Distance (3)].
5
■ Subaddress and Password
You can store a subaddress and a password in the one-touch speed dialing key to keep
transmissions confidential.
■ ECM TX
ECM (Error Correction Mode) reduces system and line errors when you are sending or
receiving documents from another machine with ECM capability.
NOTE
The default settings are:
- Send Time:
None
- Sending Speed:
- Long Distance:
- Subaddress, Password:
- ECM TX:
33600 bps
Domestic
None
On
1
Press
(Additional Functions) ➞ [Custom Fax Settings] ➞
[Register Destinations].
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-26
2
Select the desired one-touch speed dialing key containing the
destination for which you want to set optional settings.
If the desired one-touch speed dialing key is not displayed, press [
] (Index).
5
3
Press [Register].
Press [ ] or [ ] to display the prior or subsequent one-touch speed dialing
number.
You can also enter the coded speed dialing number (001-200) using
-
(numeric keys).
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-27
4
Press [Option].
The Option screen appears.
5
NOTE
To cancel storing optional settings, press [Cancel].
5
If necessary, specify the desired optional settings.
● If you want to set the send time:
❑ Press [Send Time].
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-28
❑ Select a number ([1] to [5]) ➞ enter the send start time using
(numeric keys) ➞ press [OK].
-
You can store up to five different start times.
Enter all four digits of the time (including zeros), using 24-hour notation.
5
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
NOTE
If you make a mistake when entering the time, press
enter another four digit number.
(Clear) to clear your entry
➞
● If you want to specify the transmission speed:
❑ Press [Sending Speed].
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-29
❑ Select the desired sending speed ➞ press [OK].
● If you want to specify long distance settings:
❑ Press [Long Distance].
5
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-30
❑ Select the type of call ➞ press [OK].
Select [Domestic] for dialing domestic (local) telephone numbers. Select
[Long Distance (1)] if communication errors frequently occur when you make
overseas calls (when the overseas telephone number is registered in the
Address Book). If errors persist, try selecting [Long Distance (2)] or [Long
Distance (3)].
5
● If you want to specify a subaddress and password:
❑ Press [Subaddress].
❑ Press [Subaddress] ➞ enter the recipient's subaddress using
-
(numeric keys).
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-31
❑ Press [Password] ➞ enter the recipient's password using
(numeric keys) ➞ press [OK].
-
You can enter up to 20 digits for both the subaddress and password.
Press [Space] to insert a space.
5
Press [Backspace] to delete the last digit you entered.
If the recipient did not set a password for the target subaddress, you do not
need to enter a password.
IMPORTANT
If you want to attach a subaddress to your send job, make sure that the recipient's
fax machine supports ITU-T standard subaddresses.
NOTE
•
For instructions on sending documents with a subaddress, see "Sending with a
•
You can press
(Clear) to clear your entry.
● If you want to specify ECM TX:
❑ Press [ECM TX].
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-32
❑ Select [On] or [Off] ➞ press [OK].
6
7
When all settings are complete, press [OK].
5
The display returns to the Store Destinations screen.
Finish storing the destination.
NOTE
Storing Group Destinations
Group Dialing enables you to register several destinations in a one-touch speed
dialing key, so that you can dial a large group of numbers at one time. Destinations
must be registered for one-touch or coded speed dialing before you can register
them for group dialing.
Follow the procedure below to register a group of telephone numbers for group
dialing.
NOTE
•
You can store up to 199 one-touch speed dialing and coded speed dialing destinations in
a single group.
•
If you want to send documents to the destinations in the group at the same time every
day, you can also specify the send time.
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-33
1
2
Press
(Additional Functions) ➞ [Custom Fax Settings] ➞
[Register Destinations].
Select the one-touch speed dialing key that you want to
register as a group destination.
5
If the desired one-touch speed dialing key is not displayed, press [
] (Index)
➞ select the index which contains the desired one-touch speed dialing key.
3
Press [Group Destination] ➞ [Register].
Press [ ] or [ ] to display the prior or subsequent one-touch speed dialing
number.
You can also enter the coded speed dialing number (001-200) using
-
(numeric keys).
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-34
4
Select the destinations that you want to store in the group
destination from the Address Book, or by pressing [Coded
Dialing].
5
● If you want to select a destination from the Address Book :
❑ Press [Address Book] ➞ select the desired one-touch speed dialing keys that
you want to include in the group destination ➞ press [Done].
The selected destinations are displayed on the Register Destinations screen.
NOTE
For more information on selecting destinations from the Address Book, see
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-35
● If you want to select a destination by entering the coded speed
dialing number:
❑ Press [Coded Dialing] ➞ enter the coded speed dialing number (001-200)
using
-
(numeric keys).
5
The selected destinations appears on the Store Destinations screen.
IMPORTANT
You cannot select a destination that is already stored in a group destination.
NOTE
•
•
•
For more information on specifying coded speed dialing numbers, see "Coded
To erase a destination stored in a group destination, select the destination
[Erase].
➞
press
If you want to cancel registering the group destination, press [Cancel].
● If you want to specify a transmission time:
❑ Press [Send Time].
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-36
❑ Select a number ([1] to [5]) ➞ enter the transmission time using
(numeric keys) ➞ press [OK].
-
You can store up to five different transmission times.
Enter all four digits of the time (including zeros), using 24-hour notation.
5
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
NOTE
If you make a mistake when entering the time, press
enter another four digit number.
(Clear) to clear your entry
➞
5
6
Press [Next].
Enter the name of the group destination ➞ press [Next].
You can enter up to 24 characters for the group destination's name.
Storing Destinations
5-37
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
.
7
Enter the name that you want to appear on the group
destination's one-touch speed dialing key ➞ press [OK].
5
You can enter up to 12 characters for the one-touch speed dialing key's name.
If you press [Shift], you can enter uppercase characters.
The registered destination information is displayed.
NOTE
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
.
8
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-38
Storing the Index Name
You can assign a name to an index.
There are 14 indices, each of which can contain up 15 destinations. Follow the
procedure below to assign a name to an index.
1
2
Press
(Additional Functions) ➞ [Custom Fax Settings] ➞
[Register Destinations].
Press [Index Edit].
5
3
Select an index to name.
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-39
If the desired index is not displayed, press [▼] or [▲] to scroll to the desired
index.
4
Enter a name ➞ press [OK].
5
You can enter up to 20 characters for the index name.
If you want to change the name of an index that has already been named, press
(Clear) ➞ enter the new name ➞ press [OK].
NOTE
•
•
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
.
If you make a mistake, press
name.
(Clear) to clear the entire entry
➞
enter the correct
If you want to cancel entering the index name, press [Cancel].
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Storing Destinations
Download from Www.Somanuals.com. All Manuals Search And Download.
5-40
Transmission Settings
This section describes the settings that can be made when you press [TX Settings]
on the Additional Functions screen.
ECM Transmission
ECM (Error Correction Mode) reduces the effect of system and line errors on
documents that may occur when sending or receiving documents to or from
another fax machine that supports ECM. If the other machine does not support
ECM, this setting is ignored.
If transmission speed appears to be extremely slow, you may be able to speed up
the transmission time by turning ECM 'Off'.
5
IMPORTANT
•
If you want to transmit using ECM, it is necessary that ECM Transmission be set in both
the destination machine and this machine. This setting is ignored unless ECM is set in
both machines.
•
•
Even when ECM is set, errors can sometimes occur due to a poor telephone line
connection.
If there is trouble with the line, it will take more time to send the documents.
NOTE
The default setting is 'On'.
1
Press
(Additional Functions) ➞ [Custom Fax Settings].
Transmission Settings
5-41
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press [TX Settings].
Press [ECM TX].
5
Transmission Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-42
4
Select [On] or [Off] ➞ press [OK].
The selected mode is set.
5
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Pause Time
Some overseas dialing may be affected by the distance or complex routing of
connections when dialing the international access code, country code, and the
destination's telephone number all at once. In such cases, insert a pause after the
international access code. When the machine dials the number, it will pause where
the pause was inserted in the number. This helps to improve the connection.
NOTE
•
You can insert a pause when you dial the fax number using
-
(numeric keys). (See
•
•
Pauses entered at the end of dialed fax numbers are always 10 seconds long.
The default setting is '2' seconds.
1
Press
[TX Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
5-41.
Transmission Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-43
2
3
Press [Pause Time].
Press [-] or [+] to set the pause time ➞ press [OK].
5
The pause time can be set from 1 to 15 seconds in one second increments.
You can also use
You can change the value by pressing [-] or [+], even if you entered the value
using (numeric keys).
-
(numeric keys) to enter the value.
-
The selected mode is set.
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Transmission Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-44
Auto Redial
Auto Redial enables the machine to automatically redial the recipient's fax number
if the recipient cannot be reached due to a busy line, or if a sending error occurs.
Auto Redial can be turned 'On' or 'Off'. If you set Auto Redial to 'On', you can set
how many times the machine redials the number, the redial interval, and whether
the document should be resent due to an error.
NOTE
The default settings are:
- Auto Redial:
On
- Redial Times:
2 times
- Redial Interval:
- Transmission Error Resend:
2 minutes
Error and 1st page
5
1
2
Press
[TX Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
5-41.
Press [Auto Redial].
Transmission Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-45
3
Select [On] or [Off].
● If you select [On]:
❑ Press [Option].
5
Transmission Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-46
❑ Specify the Auto Redial settings.
• If you want to set the number of times the machine redials the number:
❑ Press [Redial Times].
❑ Press [-] or [+] to set the number of redial times ➞ press [OK].
5
The machine can redial from 1 to 10 times.
• If you want to set the redial interval:
❑ Press [Redial Interval].
Transmission Settings
5-47
Download from Www.Somanuals.com. All Manuals Search And Download.
❑ Press [-] or [+] to set the redial interval ➞ press [OK].
The redial interval can be set from 2 to 99 minutes in one minute increments.
• If you want to set how the machine handles a transmission error:
❑ Press [TX Error Resend].
5
❑ Select how the machine should handle a transmission error ➞ press [OK] ➞
[OK].
TX Error Resend
[Error and 1st page]: Auto Redial takes place if a sending error occurs. The
first page of the document, the error page, and all
subsequent pages are resent.
[All pages]:
Auto Redial takes place if a sending error occurs. All
pages of the document are resent.
[Off]:
Redialing does not take place if a sending error occurs.
Transmission Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-48
● If you select [Off]:
❑ Press [OK].
The selected mode is set.
5
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Transmission Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-49
Reception Settings
This section describes the settings that can be made when you press [RX Settings]
on the Additional Functions screen.
ECM Reception
You can receive incoming documents using ECM (Error Correction Mode).
ECM is a mode which automatically corrects errors in an image while it is being
received.
If reception speed appears to be extremely slow, you may be able to speed up the
reception time by turning ECM 'Off'.
5
IMPORTANT
•
If you want to communicate using ECM, it is necessary that ECM Reception be set in
both the destination machine and this machine. This setting is ignored unless ECM is set
in both machines.
•
•
Even when ECM is set, errors can sometimes occur due to a poor telephone line
connection.
If there is trouble with the line, it will take more time to receive the documents.
NOTE
The default setting is 'On'.
1
Press
(Additional Functions) ➞ [Custom Fax Settings].
Reception Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-50
2
3
Press [RX Settings].
Press [ECM RX].
5
Reception Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-51
4
Select [On] or [Off] ➞ press [OK].
The selected mode is set.
5
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Printing Footer Information on a Received Document
You can set whether the machine prints the date, day, and time received,
transaction number, and page number at the bottom of the received document.
05/03/2004
MON 11:20
JOB NO. 5010
001
Page Number
Transaction Number
Time Received
Day Received
Date Received
NOTE
The default setting is 'Off'.
Reception Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-52
1
2
Press
[RX Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
5-50.
Press [Received Page Footer].
5
3
Select [On] or [Off] ➞ press [OK].
The selected mode is set.
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Reception Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5-53
Printing Received Documents
You can set the number of received documents to print and the method of printing
them.
Paper Drawer Selection
You can set how the machine prints documents when there is no paper matching
the size of the received document.
There are four printing methods (Switches A, B, C, and D):
• Switch A: The image is printed over two sheets of paper that have the same
5
combined size as the received document.
Received Data (Original)
Output
11" x 17"
LTR
LTR
• Switch B: The image is printed with blank space on paper that has the same
width as the received document.
Received Data (Original)
Output
LTR
11" x 17"
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-54
• Switch C: The image is reduced and printed on paper that differs in width from
the received document.
Received Data (Original)
Output
LTRR
11" x 17"
• Switch D: The image is printed on paper that is larger in size than the received
document.
Received Data (Original)
Output
5
LTRR
11" x 17"
NOTE
•
For more information on selecting a paper source for printing received documents, see
Chapter 4, "Customizing Settings," in the Reference Guide
.
•
The default setting for all switches is 'On'.
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-55
1
2
Press
(Additional Functions) ➞ [Custom Fax Settings].
5
Press [Printer Settings].
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-56
3
4
Press [Select Cassette].
Select [On] or [Off] for the respective switches ➞ press [OK].
5
The selected mode is set.
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-57
Reducing a Received Document
You can set the machine to automatically reduce received documents so that the
whole document is printed within the printable area of the paper.
NOTE
The default settings are:
- Receive Reduction:
- RX Reduction:
- Reduce %:
On
Auto
90%
- Reduce Direction:
Vertical Only
1
2
Press
[Printer Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
5
Press [Receive Reduction].
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-58
3
Select [On] or [Off].
IMPORTANT
If you select [Off], the received document is not automatically reduced to fit the size
of the paper. If the size of the received document exceeds the printable area, the
image is divided into equal sections and printed onto separate sheets of paper.
However, if the size of the received document exceeds the recording paper slightly
(1/2" (12 mm) or less), the part of the image that does not fit on the paper is not
printed.
5
● If you select [On]:
❑ Select [Auto] or [Fix. Red.] for <RX Reduction>.
RX Reduction
[Auto]:
The image is automatically reduced by a suitable reduction ratio
that can range from the value set for <Reduce %>, up to 100% of
the received document size.
[Fix. Red.]: The image is reduced by the reduction ratio set in <Reduce %>.
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-59
❑ If you selected [Fix. Red.], press [-] or [+] to specify the reduction ratio.
You can specify the reduction ratio from 75% to 97% in 1% increments.
NOTE
•
•
You can also use
You can change the value by pressing [-] or [+], even if you entered the value using
(numeric keys).
-
(numeric keys) to enter the value.
5
-
❑ Select [Ver. Hor.] or [Vertical Only] for <Reduce Direction> ➞
press [OK].
Reduce Direction
[Ver. Hor.]:
The image is reduced in both the vertical and horizontal
directions.
[Vertical Only]: The image is reduced in the vertical direction only.
The selected mode is set.
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-60
● If you select [Off]:
❑ Press [OK].
The selected mode is set.
5
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Two-Sided Printing
You can print received documents on both sides of the paper. This enables you to
save paper.
NOTE
The default setting is 'Off'.
1
Press
[Printer Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-61
2
3
Press [Two-sided Print].
Select [On] or [Off] ➞ press [OK].
5
The selected mode is set.
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-62
2 On 1 Log
This mode enables you to print two received documents of the same paper size on
a single sheet of paper.
The 2 On 1 Log mode is available only under the following conditions:
• The same paper drawer must be selected for printing two consecutive pages of
the received document.
• The paper in the selected paper drawer must be large enough for two consecutive
pages to be printed.
- Example: If the LTR paper drawer is empty, but the 11" x 17" paper drawer is
loaded, you can print two LTR documents onto a single sheet of 11" x 17" paper.
NOTE
•
When the 2 On 1 Log mode is set to 'On', documents are printed with a dotted line in the
middle. If the document is received with sender information, the dotted line is not printed
in the area where the sender information is located.
5
•
The default setting is 'Off'.
1
Press
[Printer Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
2
Press [2 On 1 Log].
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-63
3
Select [On] or [Off] ➞ press [OK].
The selected mode is set.
5
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Printing Received Documents
Download from Www.Somanuals.com. All Manuals Search And Download.
5-64
Setting Up Memory Boxes
This section describes how to set up a memory box to use it for sending and
receiving documents.
A memory box is a location in the memory you can create to store scanned or
received documents for printing or transmitting to other destinations. However, the
main advantage to using memory boxes is that you can handle confidential
transmissions with ITU-T passwords and subaddresses.
To use a memory box, it is necessary to set up and store the different types of
memory boxes in advance. There are three types of memory boxes: Confidential,
Relay, and Batch Sending. For more information on using memory boxes, see
5
IMPORTANT
•
By specifying a unique subaddress for each memory box, each user can have their own
memory box, preventing others from accessing their confidential documents.
•
Subaddresses stored in the memory boxes of this machine must be unique. They cannot
be set to the same value.
NOTE
•
•
•
A subaddress or password can be up to 20 digits long and consist of numbers, *, #, or
spaces.
For more information on sending documents with a subaddress and password, see
You can store up to 50 memory boxes.
Setting Up Memory Boxes
5-65
Download from Www.Somanuals.com. All Manuals Search And Download.
Confidential Memory Box
A Confidential Memory Box is a dedicated memory box for receiving confidential
documents which can be set with a password for restricted access. You can use a
Confidential Memory Box to receive important documents that you do not want
A document received in a Confidential Memory Box cannot be printed until you
enter the password set for the memory box.
You can specify the following items for a Confidential Memory Box: the memory box
name, password, subaddress, and RX password.
Follow the procedure below to set up a Confidential Memory Box.
1
Press
(Additional Functions) ➞ [Custom Fax Settings].
5
2
Press [File Settings].
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-66
3
4
Press [Memory Inboxes Settings].
Select the desired memory box number ➞ press [Register].
5
If the desired memory box is not displayed, press [▼] or [▲] to scroll to the
desired memory box.
If you enter the memory box number using
-
(numeric keys), make sure to
enter a two digit number ➞ press [OK].
If you make mistake when entering the memory box number, press
enter the correct number.
(Clear) ➞
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-67
5
Select [Confidential] ➞ press [Next].
NOTE
If you want to cancel setting up the selected memory box, press [Cancel].
5
6
Press [Register Name].
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-68
7
Enter a name for the Confidential Memory Box ➞ press [OK].
You can enter up to 24 characters for the Confidential Memory Box name.
NOTE
5
•
•
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
.
If you make a mistake, press
name.
(Clear) to clear the entire entry
➞
enter the correct
If you want to cancel entering the memory box name, press [Cancel].
8
If you want to set a password for this Confidential Memory
Box, enter the password using
-
(numeric keys) ➞ press
[Next].
If you do not want to set a password, press [Next] ➞ process to step 9.
You cannot store a password with only zeros as the number, such as <0000000>.
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-69
IMPORTANT
Since there is no way to check a stored password, make sure that you write it
down, and keep it in a safe place.
NOTE
•
If you make a mistake when entering the password, press
entire entry enter the correct password.
If you want to cancel setting up the selected memory box, press [Cancel].
(Clear) to clear the
➞
•
9
Use
and password.
-
(numeric keys), , and
to enter the subaddress
❑ Press [Subaddress] ➞ enter the subaddress.
❑ Press [Password] ➞ enter the password.
❑ Press [OK].
5
You can enter up to 20 digits for both the subaddress and password.
Press [Space] to insert a space.
Press [Backspace] to delete the last digit that you entered.
The selected mode is set.
IMPORTANT
•
•
You must enter a subaddress. This setting is required. All confidential documents
must be sent to your machine with this subaddress. If the subaddresses do not
match, the document will not be received.
An RX password is optional. However, if you set an RX password, all confidential
documents sent to your machine must include this password, as well as the
matching subaddress.
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-70
NOTE
•
If you make a mistake when entering the subaddress/password, press
enter the correct subaddress and password.
(Clear)
➞
•
If you want to cancel storing the subaddress/password, press [Cancel].
10 Press [Done] repeatedly until the Fax Basic Features screen
appears.
Relay Memory Box
A Relay Memory Box enables you to forward received documents to a number of
specified destinations at a specified time, using the machine as a relay unit.
You can set the Relay Start Time, and relay all of the documents stored in the
5
You can specify the following items for the Relay Memory Box.
Item
Description
Setting
Relay*1
24 characters
maximum
Memory Box Name
Sets the memory box name.
Sets a password to control the memory box.
It is necessary to enter the password to
change the contents of the memory box, or to
print documents received in the memory box.
Not required
A one to seven digit
number
Password
Required
Sets an ITU-T standard subaddress. A
subaddress is required to distinguish a Relay
Memory Box from other memory boxes.
Numbers, #, *, and
spaces can be used
(up to 20 digits).
Subaddress
Sets an ITU-T standard password. If a
password has been set, the password added
to the received documents is compared with
the set password. If the passwords do not
match, the documents are not received.
Not required
Numbers, #, *, and
spaces can be used
(up to 20 digits).
RX Password
Specify the
Relay Sending
Destination
Sets the destination to which the received
documents in the memory box are sent.
destination using the
Address Book or
Coded Speed Dialing.
*1 Indicates the default setting.
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-71
Item
Description
Setting
On, Off*1
Sets whether to restrict the original relay source
machine from sending you a transmission
request.
Org. Relay Unit
Restriction
If 'On' is selected, the telephone numbers of the
relay source machines from which you want to destination using the
Specify the
receive documents are specified.
Documents can only be received from the set
relay source machines.
Address Book or
Coded Speed
Dialing.
Sets whether to send relay transmission results
to sender.
On, Off*1
Print RX Document
Relay Start Time
Sets the start time for relaying the documents.
Once you make this setting, the documents in
the memory box are relayed automatically at
the specified time.
On, Off*1
*1 Indicates the default setting.
5
NOTE
•
The relay destinations and the relay source machines should be stored in the Address
Book beforehand.
•
The subaddress and RX password stored in the Address Book are ignored.
1
Press
[File Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
2
Press [Memory Inboxes Settings].
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-72
3
Select the desired memory box number ➞ press [Register].
If the desired memory box is not displayed, press [▼] or [▲] to scroll the desired
memory box.
5
If you enter the memory box number using
enter a two digit number ➞ press [OK].
-
(numeric keys), make sure to
If you make mistake when entering the memory box number, press
enter the correct number.
(Clear) ➞
4
Select [Relay] ➞ press [Next].
NOTE
If you want to cancel setting up the selected memory box, press [Cancel].
Setting Up Memory Boxes
5-73
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press [Register Name].
Enter a name for the Relay Memory Box ➞ press [OK].
5
You can enter up to 24 characters for the Relay Memory Box name.
NOTE
•
•
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
.
If you make a mistake, press
name.
(Clear) to clear the entire entry
➞
enter the correct
If you want to cancel entering the memory box name, press [Cancel].
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-74
7
If you want to set a password for this Relay Memory Box, enter
the password using (numeric keys) ➞ press [Next].
-
If you do not want to set a password, press [Next] proceed to step 8.
5
You cannot store a password with only zeros as the number, such as <0000000>.
IMPORTANT
Since there is no way to check a stored password, make sure that you write it
down, and keep it in a safe place.
NOTE
•
If you make a mistake when entering the password, press
entire entry enter the correct password.
If you want to cancel setting up the Relay Memory Box, press [Cancel].
(Clear) to clear the
➞
•
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-75
8
Use
and password.
-
(numeric keys), , and
to enter the subaddress
❑ Press [Subaddress] ➞ enter the subaddress.
❑ Press [Password] ➞ enter the password.
❑ Press [Next].
5
You can enter up to 20 digits for both the subaddress and password.
Press [Space] to insert a space.
Press [Backspace] to delete the last digit you entered.
IMPORTANT
•
You must enter a subaddress. This setting is required. All documents must be sent
and relayed with this subaddress. If the subaddresses do not match, the
documents will not be received.
•
An RX password is optional. However, if an RX password is set on the recipient's
machine, the relayed documents must be sent with that password, as well as the
matching subaddress. Otherwise, the recipient's machine will not receive the
documents.
NOTE
•
If you make a mistake when entering the subaddress/password, press
enter the correct subaddress and password.
(Clear)
➞
•
To cancel storing the subaddress/password, press [Cancel].
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-76
9
Select the destinations that you want to store as relay
destinations from the Address Book, or by pressing [Coded
Dialing].
5
● If you want to select a destination from the Address Book :
❑ Press [Address Book] ➞ select the desired one-touch speed dialing keys that
you want to store as relay destinations ➞ press [Done].
The selected destinations are displayed on the Register Destinations screen.
NOTE
For more information on selecting destinations from the Address Book, see
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-77
● If you want to select a destination by entering the coded speed
dialing number:
❑ Press [Coded Dialing] ➞ enter the coded speed dialing number (001-200)
using
-
(numeric keys).
5
The selected destination appears on the Register Destinations screen.
NOTE
•
•
•
For more information on specifying coded speed dialing numbers, see "Coded
To erase a destination stored as a relay destination, select the destination
[Erase].
➞
press
If you want to cancel storing relay destinations, press [Cancel].
10 Press [Next].
Setting Up Memory Boxes
5-78
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Select each relay setting.
● If you want to restrict the relay source machine from sending you a
transmission request:
❑ Press [On] for <Original Unit Restriction>.
5
❑ Specify the destination ➞ press [OK].
If you do not want to set a restriction, press [Off].
You can also specify the relay destination using
-
(numeric keys).
If the desired destination is not displayed, press [▼] or [▲] to scroll to the
desired destination.
NOTE
•
•
To erase a specified destination, select the desired destination from the list ➞press
[Erase].
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-79
● If you want to print the received document:
❑ Press [On] for <Print RX Document>.
If you do not want to print the received document, press [Off].
5
● If you want to specify the relay start time:
❑ Press [On] for <Relay Start Time>.
NOTE
If you select [Off], relay sending starts when documents are received in the Relay
Memory Box.
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-80
❑ Enter the relay start time using
-
(numeric keys) ➞ press [OK].
If you do not want to specify the relay start time, press [Cancel].
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
5
11:18 p.m.
NOTE
If you make a mistake when entering the time, press
enter another four digit number.
(Clear) to clear your entry
➞
12 When all settings are complete, press [OK].
The selected modes are set.
13 Press [Done] repeatedly until the Fax Basic Features screen
appears.
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-81
Batch Sending Memory Box
The Batch Sending Memory Box enables you to send documents to a specific
Setting a time to send the documents when communication charges are low,
enables you to reduce communication costs.
You can specify the following items for the Batch Sending Memory Box.
Item
Description
Setting
Batch Sending*1
24 characters maximum
Memory Box Name
Sets the memory box name.
Sets a password to control the memory
box. It is necessary to enter the password
to change the contents of the memory box,
or to scan an original into the memory box.
Not required
A one to seven digit
number
Password
5
Required
Sets the destination to which the
documents are sent.
Specify the destination
using the Address Book
or Coded Speed Dialing.
Destination
Sets the start time for transmission. The
documents in the memory box are
automatically sent at the specified time.
Required
No default setting
TX Start Time
*1 Indicates the default setting.
NOTE
Destinations must be stored in the address book beforehand.
1
2
Press
[File Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
Press [Memory Inboxes Settings].
5-66.
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-82
3
Select the desired memory box number ➞ press [Register].
If the desired memory box is not displayed, press [▼] or [▲] to scroll to the
desired memory box.
5
If you enter the memory box number using
enter a two digit number ➞ press [OK].
-
(numeric keys), make sure to
If you make mistake when entering the memory box number, press
enter the correct number.
(Clear) ➞
4
Select [Batch Sending] ➞ press [Next].
NOTE
If you want to cancel setting up the selected memory box, press [Cancel].
Setting Up Memory Boxes
5-83
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press [Register Name].
Enter a name for the Batch Sending Memory Box ➞
press [OK].
5
You can enter up 24 characters for the Batch Sending Memory Box name.
NOTE
•
•
•
For instructions on entering characters, see Chapter 2, "Basic Operations," in the
Reference Guide
.
If you make a mistake, press
name.
(Clear) to clear the entire entry
➞
enter the correct
If you want to cancel entering the memory box name, press [Cancel].
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-84
7
If you want to set a password for this Batch Sending Memory
Box, enter the password using
-
(numeric keys) ➞ press
[Next].
5
You cannot store a password with only zeros as the number, such as <0000000>.
If you do not want to set a password, press [Next] ➞ proceed to step 8.
IMPORTANT
Since there is no way to check a stored password, make sure that you write it
down, and keep it in a safe place.
NOTE
•
If you make a mistake when entering the password, press
number enter the correct password.
If you want to cancel setting up the Batch Sending Memory Box, press [Cancel].
(Clear) to clear the
➞
•
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-85
8
Select the destinations that you want to store as batch
sending destinations from the Address Book, or by pressing
[Coded Dialing].
5
● If you want to select a destination from the Address Book :
❑ Press [Address Book] ➞ select the desired one-touch speed dialing keys that
you want to store as batch sending destinations ➞ press [Done].
The selected destinations are displayed on the Register Destinations screen.
NOTE
For more information on selecting destinations from the Address Book, see
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-86
● If you want to select a destination by entering the coded speed
dialing number:
❑ Press [Coded Dialing] ➞ enter the coded speed dialing number (001-200)
using
-
(numeric keys).
5
The selected destination appears on the Register Destinations screen.
NOTE
•
•
•
For more information on specifying coded speed dialing numbers, see "Coded
To erase a destination stored as a batch sending destination, select the destination
➞
press [Erase].
If you want to cancel storing batch sending destinations, press [Cancel].
9
Press [Next].
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-87
10 Enter the TX start time using
-
(numeric keys) ➞
press [OK].
If you do not want to specify the TX start time, press [Cancel].
5
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
The selected mode is set.
NOTE
If you make a mistake when entering the time, press
enter another four digit number.
(Clear) to clear your entry
➞
11 Press [Done] repeatedly until the Fax Basic Features screen
appears.
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-88
Erasing a Memory Box
Follow the procedure below to erase the contents of a stored memory box.
IMPORTANT
You cannot erase the contents of a memory box while communication (documents being
sent or received) is taking place.
1
Press
[File Settings].
(Additional Functions) ➞ [Custom Fax Settings] ➞
2
3
Press [Memory Inboxes Settings].
5
5-66.
Select the memory box that you want to erase ➞ press [Erase].
If the desired memory box is not displayed, press [▼] or [▲] to scroll to the
desired memory box.
If you enter the memory box number using
-
(numeric keys), make sure to
enter a two digit number ➞ press [OK].
If you select a memory box that is set with a password, enter the password using
(numeric keys) ➞ press [OK].
-
To erase multiple memory boxes, select and erase one memory box at a time.
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-89
NOTE
If you make a mistake when entering the memory box number, press
enter the correct number.
(Clear)
➞
4
Press [Yes].
5
If you do not want to erase the selected memory box, press [No].
The message <Erased.> appears for approximately two seconds on the touch
panel display.
The selected memory box is erased.
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Setting Up Memory Boxes
Download from Www.Somanuals.com. All Manuals Search And Download.
5-90
6
System Manager Settings
CHAPTER
This chapter describes the settings that can be made by the System Manager (the person in
charge of the machine).
System Settings Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Communications Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Send Start Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-3
Receive Start Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-6
Reception Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-30
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
System Settings Table
The following items can be stored or set in System Settings from the Additional
Functions screen.
■ System Settings
Applicable
Item
Settings
Page
Communications Settings
Send Start Speed
33600 bps*1, 14400 bps, 9600 bps,
7200 bps, 4800 bps, 2400 bps
p. 6-3
p. 6-6
33600 bps*1, 14400 bps, 9600 bps,
7200 bps, 4800 bps, 2400 bps
Receive Start Speed
On, Off*1
6
Forward Settings
p. 6-16
p. 6-7
On, Off*1
Memory Lock Settings
PIN Code Access
On, Off*1
p. 6-28
p. 6-33
Receive Password
20 digits maximum
On, Off*1
Restricting New Address*2
*1 Indicates the default setting.
*2 Indicates items available only when the machine is in the System Management mode.
NOTE
For instructions on setting the modes not described in this manual, refer to the other
System Settings Table
Download from Www.Somanuals.com. All Manuals Search And Download.
6-2
Communications Settings
This section describes settings that the System Manager can make, including the
send start speed, reception speed, and RX mode. It also describes how to set,
change, and erase settings for forwarding received documents.
Send Start Speed
Setting the send start speed enables you to set the desired speed of transmission.
NOTE
The default setting is '33600 bps'.
6
1
Press
(Additional Functions) ➞ [System Settings].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
(ID).
-
(numeric keys) ➞ press
Communications Settings
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press [Communications Settings].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
6
3
Press [Send Start Speed].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-4
4
Select the desired start speed ➞ press [OK].
The selected mode is set.
NOTE
If your document transmission is slow in starting, this may mean that the telephone
lines in your area are in poor condition. Select a slower speed. You can select
[33600 bps], [14400 bps], [9600 bps], [7200 bps], [4800 bps], or [2400 bps].
6
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-5
Receive Start Speed
Setting the reception speed enables you to set the desired speed of reception.
NOTE
The default setting is '33600 bps'.
1
2
Press
(Additional Functions) ➞ [System Settings] ➞
[Communications Settings].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
(ID).
-
(numeric keys) ➞ press
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
6
Press [Receive Start Speed].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-6
3
Select the desired start speed ➞ press [OK].
The selected mode is set.
NOTE
If your document reception is slow in starting, this may mean that the telephone
lines in your area are in poor condition. Select a slower speed. You can select
[33600 bps], [14400 bps], [9600 bps], [7200 bps], [4800 bps], or [2400 bps].
6
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Saving Received Documents in Memory
Normally a document prints as soon as you receive it. However, there may be
occasions when you want the machine to store all incoming documents in memory
until you are ready to print them. Locking the machine to receive and store all
documents in memory is called "Memory Lock."
After the Memory Lock mode is turned 'On', the machine will automatically enter
and leave the Memory Lock mode at the times you specify. The documents
received when the machine is in the Memory Lock mode are stored in memory until
you unlock the memory with a password and print or send them.
Follow the procedure below to define a memory lock password and set the times for
the machine to enter and leave the Memory Lock mode.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-7
NOTE
•
•
•
Received documents that are stored in memory are displayed on the RX Job Status
screen. You can erase, forward, or check the details of the received documents from the
RX Job Status screen.
Even if the Memory Lock mode is set to 'Off', documents that are sent to Relay Memory
Box and Confidential Memory Box are stored in those memory boxes without being
printed.
You can enter up to seven digits for the password. If you enter fewer that seven digits, the
machine stores the password with leading zeros.
- Example: If <321> is entered, <0000321> is stored.
The default setting is 'Off'.
•
1
Press
(Additional Functions) ➞ [System Settings] ➞
[Communications Settings].
If the System Manager ID and System Password have been set, enter the System
6
Manager ID and System Password using
-
(numeric keys) ➞ press
(ID).
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
2
Press [Memory Lock Settings].
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-8
If a password has been set for the Memory Lock Settings screen, enter the
password using
-
(numeric keys) ➞ press [Next].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
6
3
Select [On] ➞ press [Option].
If you do not want to set the Memory Lock mode, select [Off] ➞ press [OK] ➞
proceed to step 7.
NOTE
To cancel this setting, press [Cancel].
Communications Settings
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
4
If you want to set a password for the Memory Lock mode,
enter a password using (numeric keys) ➞ press [Next].
-
If you set a password, it will be necessary to enter the password whenever you
want to change the Memory Lock mode settings, or cancel the Memory Lock
mode.
If you do not want to set a password, press [Next] ➞ proceed to step 5.
6
You cannot store a password with only zeros as the number, such as <0000000>.
IMPORTANT
Since there is no way to check a stored password, make sure that you write it
down, and keep it in a safe place.
NOTE
If you make a mistake when entering the password, press
entire entry enter the correct password.
(Clear) to clear the
➞
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-10
5
If necessary, specify the memory lock setting.
● If you want to print the Received Result Report and Transmission
Management Report:
❑ Press [On] for <Report Print>.
If you do not want to print these reports, press [Off].
6
NOTE
•
For an example of the Received Result Report and Transmission Management
Report, see Chapter 9, "Appendix."
•
The default setting is 'On'.
● If you want to specify the Memory Lock start time:
❑ Press [Memory Lock Start Time].
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-11
❑ Select [Everyday], [Select Days], or [Off].
If [Everyday] is selected, press [Next] ➞ select a number ([1] to [5]) ➞ enter
the start time using
-
(numeric keys) ➞ press [OK].
6
You can store up to five different start times.
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
Communications Settings
6-12
Download from Www.Somanuals.com. All Manuals Search And Download.
If [Select Days] is selected, press [Next] ➞ select a day of the week ([Sun] to
[Sat]) ➞ select a number ([1] to [5]) ➞ enter the start time using
-
(numeric keys) ➞ press [OK].
You can store up to five different start times for each day of the week.
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
6
If [Off] is selected, the Memory Lock mode will not start automatically at a
specified time. You can manually switch the machine into the Memory Lock
mode using the RX mode from the Special Features screen. (See "Changing
NOTE
•
You can select [Everyday] for the Memory Lock Start Time, and [Select Days] for
the Memory Lock End Time, and vice versa.
•
If you make a mistake when entering the time, press
enter another four digit number.
(Clear) to clear your entry
➞
•
•
If you do not want to specify the start time, press [Cancel].
To disable the Memory Lock Start Time, press [Memory Lock Start Time]
➞
[Off].
Communications Settings
6-13
Download from Www.Somanuals.com. All Manuals Search And Download.
● If you want to specify the Memory Lock end time:
❑ Press [Memory Lock End Time].
❑ Select [Everyday], [Select Days], or [Off].
6
If [Everyday] is selected, press [Next] ➞ select a number ([1] to [5]) ➞ enter
the end time using
-
(numeric keys) ➞ press [OK].
You can store up to five different end times.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-14
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
If [Select Days] is selected, press [Next] ➞ select a day of the week ([Sun] to
[Sat]) ➞ select a number ([1] to [5]) ➞ enter the end time using
-
(numeric keys) ➞ press [OK].
You can store up to five different end times for each day of the week.
Enter all four digits of the time (including zeros), using 24-hour notation.
6
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
If [Off] is selected, the Memory Lock mode will not end automatically at a
specified time. You can manually turn off the Memory Lock mode using the RX
mode from the Special Features screen. (See "Changing the Reception
NOTE
•
You can select [Everyday] for the Memory Lock Start Time, and [Select Days] for
the Memory Lock End Time, and vice versa.
•
If you make a mistake when entering the end time, press
entry enter another four digit number.
(Clear) to clear your
➞
•
•
•
If you do not want to specify the end time, press [Cancel].
The default setting is 'Off'.
To disable the Memory Lock End Time, press [Memory Lock End Time]
➞
[Off].
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-15
6
When all settings are complete, press [OK].
The selected modes are set.
7
Press [Done] repeatedly until the Fax Basic Features screen
appears.
6
Automatic Forwarding of Received Documents
The Forward mode enables your machine to receive documents, and then
automatically forward them to another fax machine. You can set a day and time for
your machine to switch to the Forward mode.
If you want to use the Forward mode, you must first set the forwarding destination.
IMPORTANT
•
•
•
If Forward Setting is set to 'Off', your machine will not forward received documents.
You can only forward documents that are sent directly to your machine.
Documents that are received in a memory box are not forwarded.
NOTE
•
•
•
You can set the machine so that it only forwards documents from a specific remote
machine (Select Original Unit).
Store the telephone numbers of the forwarding destinations or the forwarding source
machines (original units) in one-touch speed dialing keys.
The default setting is 'Off'.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-16
1
2
Press
(Additional Functions) ➞ [System Settings] ➞
[Communications Settings].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
-
(numeric keys) ➞ press
(ID).
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Press [Forward Settings].
6
If a password has been set for the Forward Settings screen, enter the password
using (numeric keys) ➞ press [Next].
-
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-17
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
3
Select [On] ➞ press [Option].
If you do not want to set the Forward mode, select [Off] ➞ press [OK] ➞ proceed
to step 9.
6
NOTE
To cancel this setting, press [Cancel].
4
If you want to set a password for the Forward mode, enter a
password using
-
(numeric keys) ➞ press [Next].
If you set a password, it will be necessary to enter the password whenever you
want to change the Forward settings, or cancel the Forward mode.
If you do not want to set a password, press [Next] ➞ proceed to step 5.
You cannot store a password with only zeros as the number, such as <0000000>.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-18
IMPORTANT
•
Since there is no way to check a stored password, make sure that you write it
down, and keep it in a safe place.
•
You cannot set the Forward mode while the machine is sending or receiving
documents, or when there are documents stored in memory.
NOTE
•
If you make a mistake when entering the password, press
entire entry enter the correct password.
If you want to cancel setting the Forward mode, press [Cancel].
(Clear) to clear the
➞
•
5
Select the desired destinations to which you want to forward
documents.
6
● If you want to select a destination from the Address Book :
❑ Press [Address Book] ➞ select the desired one-touch speed dialing keys to
which you want to forward documents ➞ press [Done].
The selected destinations are displayed on the Register Destinations screen.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-19
NOTE
For more information on selecting destinations from the Address Book, see
● If you want to select a destination by entering the coded speed
dialing number:
❑ Press [Coded Dialing] ➞ enter the coded speed dialing number (001-200)
using
-
(numeric keys).
6
The selected destination appears on the Register Destinations screen.
NOTE
•
•
•
For more information on specifying coded speed dialing numbers, see "Coded
To erase a destination to which you want to forward documents, select the
destination
➞
press [Erase].
If you want to cancel storing the forwarding destinations, press [Cancel].
6
Press [Next].
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-20
7
If necessary, specify the forward settings.
● If you only want to receive documents from the original forward
source:
❑ Press [On] for <Original Unit Restriction>.
❑ Specify the source forwarding destination ➞ press [OK].
6
If you do not want to restrict the reception of forwarded documents, press
[Off].
You can also specify source the forward destination using
-
(numeric keys).
If the desired destination is not displayed, press [▼] or [▲] to scroll to the
desired destination.
NOTE
•
•
To erase a specified forward destination, select the desired destination from the list
➞
press [Erase].
•
The default setting is 'Off'.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-21
● If you want to print the forwarded document:
❑ Press [On] for <Print RX Document>.
If you do not want to print the received document, press [Off].
NOTE
The default setting is 'Off'.
6
● If you want to specify the forward start time:
❑ Press [Forward Start Time].
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-22
❑ Select [Everyday], [Select Days], or [Off].
If [Everyday] is selected, press [Next] ➞ select a number ([1] to [5]) ➞ enter
the send start time using
-
(numeric keys) ➞ press [OK].
6
You can store up to five different start times.
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-23
If [Select Days] is selected, press [Next] ➞ select a day of the week ([Sun] to
[Sat]) ➞ select a number ([1] to [5]) ➞ enter the start time using
-
(numeric keys) ➞ press [OK].
You can store up to five different start times for each day of the week.
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
6
If [Off] is selected, the Forward mode will not start automatically at a specified
time. You can manually switch the machine into the Forward mode, using the
RX mode from the Special Features screen. (See "Changing the Reception
NOTE
•
You can select [Everyday] for the Forward Start Time, and [Select Days] for the
Forward End Time, and vice versa.
•
If you make a mistake when entering the time, press
enter another four digit number.
(Clear) to clear your entry
➞
•
•
•
If you do not want to specify the start time, press [Cancel].
The default setting is 'Off'.
To disable the Forward Start Time, press [Forward Start Time]
➞
[Off].
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-24
● If you want to specify the forward end time:
❑ Press [Forward End Time].
❑ Select [Everyday], [Select Days], or [Off].
6
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-25
If [Everyday] is selected, press [Next] ➞ select a number ([1] to [5]) ➞ enter
the end times using (numeric keys) ➞ press [OK].
-
You can store up to five different end times.
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
6
If [Select Days] is selected, press [Next] ➞ select a day of the week ([Sun] to
[Sat]) ➞ select a number ([1] to [5]) ➞ enter the end times using
-
(numeric keys) ➞ press [OK].
You can store up to five different end times for each day of the week.
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
If [Off] is selected, the Forward mode will not end automatically at a specified
time. You can manually turn off the Forward mode, using the RX mode from the
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-26
IMPORTANT
You cannot set the same time for both the start time and end time.
NOTE
•
•
•
You can select [Everyday] for the Forward Start Time, and [Select Days] for the
Forward End Time, and vice versa.
If you make a mistake when entering the time, press
enter another four digit number.
(Clear) to clear your entry
➞
If the end time is set earlier than the start time, received documents will stop being
forwarded at the specified end time on the following day. For example:
Start time: 22:00, end time: 21:00; The end time refers to 21:00 of the following day.
•
•
•
If you do not want to specify the end time, press [Cancel].
The default setting is 'Off'.
To disable the Forward End Time, press [Forward End Time]
➞
[Off].
8
When all settings are complete, press [OK].
6
The selected modes are set.
9
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-27
PIN Code Access
If your PBX requires a PIN code to get an outside line, your machine can be set to
prompt the user to enter the PIN code before they dialing.
NOTE
•
•
If PIN Code Access is set to 'On', the machine automatically displays a screen prompting
you to enter the PIN code when you press
(Start).
The default setting is 'Off'.
1
Press
(Additional Functions) ➞ [System Settings] ➞
[Communications Settings].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
-
(numeric keys) ➞ press
(ID).
6
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
2
Press [▼] or [▲] until [PIN Code Access] appears ➞press [PIN
Code Access].
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-28
3
Press [On].
If you do not want to set PIN code access, press [Off] ➞ [OK] ➞ proceed to
step 5.
4
Select the desired type of PIN code ➞ press [OK].
6
Details of each item are shown below.
[Option]: Select if your PBX requires a PIN code depending on the destination.
If PIN Code Access is set to 'Option', [PIN Code] appears on the Fax
Basic Features screen.
[Prefix]: Select if your PBX always requires you to enter a PIN code before the
destination.
[Suffix]: Select if your PBX always requires you to enter a PIN code after the
destination.
The selected mode is set.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-29
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Reception Password
This mode enables you to set an optional ITU-T standard password.
If a subaddress is not set for a document that was received from another party
using the ITU-T standard, the machine checks for an RX password.
If the RX password does not match the RX password set in your machine, or if the
RX password is not attached to the document, the document cannot be received.
IMPORTANT
RX passwords are ignored if documents are being received in a memory box that is set
with a password. The memory box password takes precedence over the RX password.
1
Press
(Additional Functions) ➞ [System Settings] ➞
6
[Communications Settings].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
-
(numeric keys) ➞ press
(ID).
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-30
2
Press [▼] or [▲] until [Receive Password] appears ➞ press
[Receive Password].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
6
3
Enter the receive password using
and ➞ press [OK].
-
(numeric keys),
,
You can enter up to 20 digits for the receive password.
Press [Space] to insert a space.
Press [Backspace] to delete the last digit you entered.
The selected mode is set.
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-31
NOTE
•
If you make a mistake when entering the password, press
entry enter the correct password.
To cancel setting the RX password, press [Cancel].
(Clear) to clear your
➞
•
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
6
Communications Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6-32
Restricting New Addresses
This mode enables you to restrict the entering of new destinations. When you set
Restrict New Addresses to 'On' while the machine is in the System Management
mode, the following is restricted:
• Specifying a destination using
-
(numeric keys) (including Forward
destinations on the RX Job Status screen)
• Redialing the last destination
• Registering destinations in the Address Book
• Sending faxes from a computer using the fax driver
IMPORTANT
Restrict New Addresses can only be set by the System Manager.
6
NOTE
The default setting is 'Off'.
1
Press
(Additional Functions) ➞ [System Settings] ➞
[Restrict New Addresses].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
-
(numeric keys) ➞ press
(ID).
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Restricting New Addresses
6-33
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select [On] or [Off] ➞ press [OK].
The selected mode is set.
3
Press [Done] repeatedly until the Fax Basic Features screen
appears.
6
Restricting New Addresses
Download from Www.Somanuals.com. All Manuals Search And Download.
6-34
Printing Communication
Reports
7
CHAPTER
This chapter explains the method of setting the contents of a communications report and
printing lists.
Report Settings Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
TX Report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
Activity Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-6
Printing Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14
User's Data List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-16
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Report Settings Table
The following items can be stored or set in Report Settings from the Additional
Functions screen.
■ Custom Settings
Applicable
Page
Item
Settings
Fax
On, For Error Only*1, Off
TX Report
p. 7-3
p. 7-6
Report With TX Image: On*1, Off
Activity Report
Auto Print
On*1, Off
On, Off*1
Send/Receive Separate
On, Off*1
7
Daily Activity Report Time
Time Settings: 00:00 to 23:59
For Error Only, On, Off*1
On*1, Off
RX Report
p. 7-10
p. 7-12
Memory Inbox RX Report
*1 Indicates the default setting.
■ Print List
Applicable
Page
Item
Settings
Fax
Address Book List
User's Data List
Print List
Print List
p. 7-14
p. 7-16
NOTE
For instructions on setting the modes not described in this manual, refer to the other
Report Settings Table
Download from Www.Somanuals.com. All Manuals Search And Download.
7-2
Specifying Report Settings
You can specify how various reports are printed.
NOTE
Reports can be printed only if 11" x 17", LGL, LTR, or LTRR paper (plain, recycled, or
color paper) is loaded in the paper sources whose settings in Fax in Drawer Eligibility For
APS/ADS in Common Settings (from the Additional Functions screen) are set to 'On'.
(See Chapter 4, "Customizing Settings," in the Reference Guide.)
TX Report
The TX Report enables you to check whether documents were sent correctly to
their intended destinations. A TX Report can be printed automatically after the
documents are sent. You can also set the machine to print a TX Report only when a
transmission error occurs, and adjust the TX Report setting to print the first part of
the document as part of the report to remind you of the document's contents.
7
NOTE
•
•
The default settings are:
- TX Report:
- Report With TX Image:
For Error Only
On
1
Press
(Additional Functions) ➞ [Report Settings].
Specifying Report Settings
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press [Fax] under <Custom Settings>.
Press [TX Report].
7
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll the desired setting.
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-4
4
Select [For Error Only], [On], or [Off].
● If you select [For Error Only] or [On]:
❑ Select [On] or [Off] for <Report With TX Image> ➞ press [OK].
7
Report With TX Image
[On]:
[Off]:
Part of the sent document is printed on the report.
The contents of the sent document are not printed on the report.
The selected mode is set.
● If you select [Off]:
❑ Press [OK].
The TX Report is not printed.
The selected mode is set.
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-5
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Activity Report
The Activity Report is a printed log that shows the results of send and receive jobs.
The Activity Report can be printed at a specified time, or it can be printed
automatically when the number of send and receive transactions reaches 40. The
send and receive logs can also be printed separately.
An Activity Report can be printed manually from the System Monitor screen. (See
NOTE
•
If the optional iR Security Kit is activated and Job Log Display in System Settings (from
the Additional Functions screen) is set to 'Off', [Activity Report] is not displayed.
•
If the optional iR Security Kit is activated and Job Log Display in System Settings (from
the Additional Functions screen) is set to 'On', the following settings are switched to 'Off'
automatically:
- Auto Print
- Daily Activity Report Time
7
•
•
The default settings are:
- Auto Print:
- Send/Receive Separate:
- Daily Activity Report Time:
On
Off
Off
1
Press
(Additional Functions) ➞ [Report Settings] ➞ [Fax]
under <Custom Settings>.
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-6
2
Press [Activity Report].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll the desired setting.
3
Select [On] or [Off] for <Auto Print>.
7
Auto Print
[On]: The Activity Report is automatically printed when the number of send and
receive transactions reaches 40.
[Off]: The Activity Report is not automatically printed when the number of send
and receive transactions reaches 40.
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-7
4
Select [On] or [Off] for <Send/Receive Separate>.
To print the send and receive logs separately, press [On].
If it is not necessary to print the send and receive logs separately, press [Off].
5
Select [On] or [Off] for <Daily Activity Report Time> ➞
press [OK].
7
Daily Activity Report Time
[On]: The Daily Activity Report is printed at the specified time.
[Off]: The Daily Activity Report Time setting is not specified.
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-8
● If you select [On]:
❑ Enter the time using
-
(numeric keys).
Enter all four digits of the time (including zeros), using 24-hour notation.
Examples:
7:05 a.m.
➞
➞
0705
2318
11:18 p.m.
If the number of send and receive transactions exceeds 40 before the
specified time, an Activity Report of the most recent 40 transactions is printed.
7
NOTE
If you make a mistake when entering the time, press
enter another four digit number.
(Clear) to clear your entry
➞
The selected mode is set.
6
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-9
RX Report
The RX Report enables you to check whether documents were sent correctly from
the sender's machine and received successfully by this machine. An RX Report
can be printed automatically after documents are received, and you can also set
the machine to print an RX Report only when a reception error occurs.
NOTE
•
•
The default setting is 'Off'.
1
Press
(Additional Functions) ➞ [Report Settings] ➞ [Fax]
under <Custom Settings>.
2
Press [RX Report].
7
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll the desired setting.
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-10
3
Select [For Error Only], [On], or [Off] ➞ press [OK].
Details of each item are shown below.
[For Error Only]: Prints a report only when a reception error occurs.
[On]:
[Off]:
Prints a report each time a document is received.
Does not print a report.
The selected mode is set.
7
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-11
Memory Inbox RX Report
The Memory Inbox RX Report enables you to check the reception of documents in
memory boxes.
NOTE
•
on p. 9-6.
•
The default setting is 'On'.
1
Press
(Additional Functions) ➞ [Report Settings] ➞ [Fax]
under <Custom Settings>.
2
Press [▼] or [▲] until [Memory Inbox RX Report] appears ➞
press [Memory Inbox RX Report].
7
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-12
3
Select [On] or [Off] ➞ press [OK].
The selected mode is set.
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
7
Specifying Report Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
7-13
Printing Lists
You can print the contents of the Address Book or a list of Fax settings that have
been specified from the Additional Functions screen.
NOTE
Lists can be printed only if 11" x 17", LGL, LTR, or LTRR paper (plain, recycled, or color
paper) is loaded in the paper sources whose settings in Fax in Drawer Eligibility For APS/
ADS in Common Settings (from the Additional Functions screen) are set to 'On'. (See
Chapter 4, "Customizing Settings," in the Reference Guide.)
Address Book List
You can print the contents of the Address Book. This list is useful for checking the
details of destinations that are stored in the address book.
NOTE
7
1
Press
(Additional Functions) ➞ [Report Settings].
Printing Lists
7-14
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press [Fax] under <Print List>.
Press [Address Book List].
7
Printing Lists
7-15
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press [Yes].
To cancel printing, press [No].
The Address Book List is printed.
5
Press [Done] repeatedly until the Fax Basic Features screen
appears.
7
User's Data List
You can print a list of Fax settings that have been specified from the Additional
Functions screen.
NOTE
1
Press
under <Print List>.
(Additional Functions) ➞ [Report Settings] ➞ [Fax]
7-14.
Printing Lists
7-16
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press [User's Data List].
Press [Yes].
7
To cancel printing, press [No].
The User's Data List is printed.
4
Press [Done] repeatedly until the Fax Basic Features screen
appears.
Printing Lists
7-17
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Printing Lists
7-18
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Troubleshooting
CHAPTER
This chapter describes the procedures for taking corrective action in the event that trouble
occurs. The end of the chapter shows you how to respond to error messages, and contains a
list of frequently asked questions and answers.
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
When Problems Occur
Sending Documents
Canceling transmissions.
Q
A
How do you cancel a transmission while a document is being scanned?
Press
(Stop) on the control panel, or press [Cancel] on the touch panel
display.
Q
A
How do you cancel a transmission after the document has been scanned?
Press [System Monitor] ➞ [Fax] ➞ [TX Job Status] ➞ select the document that
you want to cancel ➞ press [Cancel] ➞ [Yes]. However, documents that are
being sent may not be canceled even if you press [Cancel]. (See "Using the
Q
A
Are you sending a fax document using the Direct Sending mode?
Press
(Stop) on the control panel, or press [Cancel] on the touch panel
8
display.
Document cannot be sent.
Q
A
Q
A
Is the destination setting correct?
Check the destination setting of the recipient.
Is the destination stored in the Address Book correct?
Q
A
Has trouble occurred in the remote machine?
Check to make sure that the remote machine can receive documents. If it
cannot, check to see whether the machine is turned OFF, is out of recording
paper, or has insufficient available memory.
When Problems Occur
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2
Document cannot be sent.
Q
A
Is the telephone line type set correctly?
Q
A
If you are sending with a subaddress, did you enter the correct subaddress and
password for the destination?
Check the subaddress and password settings.
Memory is full.
Q
A
Are unnecessary documents stored in memory?
Check the TX Document and RX Document memory, and erase unnecessary
an Inbox," in the Mail Box Guide.)
The document does not print clearly on the remote machine.
Q
A
Is the platen glass clean?
Use your machine to make a copy of the document, and check it for streaks. If
streaks appear, clean the platen glass. (See Chapter 7, "Routine Maintenance,"
in the Reference Guide.)
8
The density of the documents sent to a remote machine is too light.
Q
A
Is the Density mode set to 'Light' and the Image Quality mode set to 'Photo'?
Set the Density mode to 'Dark', and the Image Quality mode to 'Text'. Try
p. 2-2.)
When Problems Occur
Download from Www.Somanuals.com. All Manuals Search And Download.
8-3
The machine will not transmit using a subaddress.
Q
A
A
Are the subaddress and password of the remote machine specified correctly?
Check to see if the recipient's machine has a subaddress function.
Check with the remote party to see if the specified subaddress and the RX
password in this machine and the remote machine are the same.
Q
A
Has trouble occurred in the remote machine?
Check to make sure that the remote machine can receive documents. If it
cannot, check to see if there is sufficient available memory.
Q
A
Are the subaddress and password for the destination stored in the Address
Book correct?
Check the subaddress and password settings for the destination in the Address
Book.
The remote machine is slow to switch over to the receiving mode, and errors always occur.
Q
A
Is a pause inserted in the fax number?
If you are sending to a machine that is slow in switching over to fax receiving,
insert a pause after the destination's fax number.
8
Receiving Documents
The machine does not receive documents.
Q
A
Does the machine have sufficient memory?
Erase unnecessary documents and documents with errors from memory to
an Inbox," in the Mail Box Guide.)
The machine does not receive documents.
Q
A
Is an RX password set in your machine?
If Receive Password is set in Communications Settings in System Settings
(from the Additional Functions screen), documents can be received only from
senders that use the correct password. Confirm this with your System Manager.
When Problems Occur
Download from Www.Somanuals.com. All Manuals Search And Download.
8-4
Documents cannot be received in memory.
Q
A
Is there sufficient available memory?
Erase unnecessary documents and documents with errors from memory to
an Inbox," in the Mail Box Guide.)
The quality of printed originals is uneven.
Q
A
Is the platen glass of the sender's machine clean?
Make a few copies using your machine. If the copies are not streaked, the
problem is in the sending party's machine. Contact the sender and ask them to
send the document again.
Documents cannot be received in Memory Boxes.
Q
A
Did the sending party send to a stored memory box?
Check the set subaddress and RX password, and contact the sending party
with this information. Documents can only be received in memory boxes if the
sender sends the documents with a matching subaddress and password. (See
8
Q
A
Is there sufficient available memory?
Erase unnecessary documents and documents with errors from memory to
an Inbox," in the Mail Box Guide.)
Other Situations
Transmissions are slow.
Q
A
Are documents being sent at a high resolution?
It is recommended that you send documents containing text only with a lower
Q
A
Is ECM TX or ECM RX set to 'On'?
When Problems Occur
Download from Www.Somanuals.com. All Manuals Search And Download.
8-5
Cannot use fax information services.
Q
A
If your machine is connected to a rotary pulse line, is your machine set for tone
dialing?
Set the machine for tone dialing to use fax information services. (See "Fax
Q
A
Did you receive an instruction from the sender to set the machine to receive?
Documents cannot be sent overseas (error code #18).
Q
A
Is a pause inserted in the fax number?
Insert a pause after the country code, or after the fax number of the other party,
A
Change the Long Distance setting on the Option screen if you are sending
documents to destinations stored in the Address Book. To access the Long
Distance setting, press
(Additional Functions) ➞ [Custom Fax Settings] ➞
8
When Problems Occur
Download from Www.Somanuals.com. All Manuals Search And Download.
8-6
Error Messages
This section explains the various messages that appear on the touch panel display,
along with possible causes and remedies.
For explanations of messages that are not listed here, see the Reference Guide
and Network Guide.
Self-Diagnostic Display
Perform the necessary procedures according to the displayed self-diagnostic error
message.
Self-diagnostic error messages appear on the touch panel display at the following
times:
• When scanning or printing cannot be performed because of an operational error
• When you need to make a decision or take some action during scanning or
printing
• When you need to make a decision or take some action while browsing the
network
8
The following is a list of self-diagnostic error messages, along with their possible
causes and remedies.
Set the IP Address.
Cause
This machine is not set with an IP address.
Remedy
Specify the IP Address Settings in TCP/IP Settings in Network Settings in
System Settings (from the Additional Functions screen), and turn the machine's
main power OFF, and then back ON.
No response from the server. Check the settings.
Cause
The specified server settings are incorrect, or the server is not turned ON.
Alternatively, the machine's TCP/IP resources may be low.
Remedy
Wait for a while, and then try browsing again. If there is still no response from
the server, try selecting another server.
Error Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
8-7
NetWare is in use. Wait for a moment, then perform operation again.
Cause
You cannot browse the network because NetWare is printing through a PServer
or NDS PServer.
Remedy
Wait until printing is complete, and try browsing again.
Check the TCP/IP.
Cause
The machine's TCP/IP connection is not operating.
Remedy
Check the IP Address Settings (IP Address, DHCP, RARP, BOOTP) in TCP/IP
Settings in Network Settings in System Settings (from the Additional Functions
screen). (See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
Cannot find the selected server. Check the settings.
Cause The IP address that the machine should connect to cannot be determined.
Remedy 1 Check the DNS Server Settings in TCP/IP Settings in Network Settings in
System Settings (from the Additional Functions screen). (See Chapter 3, "Using
a TCP/IP Network," in the Network Guide.)
Remedy 2 Check whether the DNS server's DNS settings are correct.
Cannot connect to the selected server. Check the settings.
8
Cause
The machine cannot connect to the specified IP address/port.
Remedy
Check the Gateway Address setting in IP Address Settings in TCP/IP Settings
in Network Settings in System Settings (from the Additional Functions screen).
(See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
List of Error Codes without Messages
If an error occurs while a document is being sent or received, an error code is
displayed on the job log on the System Monitor screen, and is included in various
reports. Check what the error code is, and then take the required steps to solve the
problem. (See Chapter 4, "Checking/Changing the Fax Status," and "Report and
Error Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
8-8
# 001
Cause
Paper or originals are jammed.
Remedy
Place the document properly into the feeder or on the platen glass, and remove
any jammed paper or originals. (See Chapter 8, "Troubleshooting," in the
Reference Guide.)
# 003
Cause
Communications that take longer than the preset time (64 minutes) caused the
error.
Remedy 1 Reduce the resolution or divide the document into two or more parts, and then
Remedy 2 When receiving a document, ask the remote party to either reduce the
resolution at which the document is scanned, or divide the document into two or
more parts before sending it.
# 005
Cause 1
Remedy
Cause 2
Remedy
The other party did not answer within 35 seconds.
Confirm that the remote machine is able to communicate, and try again.
The receiving machine is not a G3 fax machine.
8
Check the type of fax machine that the recipient has.
# 009
Cause 1
Remedy
Cause 2
Remedy
There is no paper.
Load paper. (See Chapter 7, "Routine Maintenance," in the Reference Guide.)
The paper drawer is not correctly inserted into the machine.
Insert the paper drawer properly.
# 011
Cause
The document that you are sending is not placed correctly.
Remedy
Place the document properly into the feeder or on the platen glass, and try
sending again.
Error Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
8-9
# 012
Cause
The document could not be sent because the receiving fax machine was out of
paper.
Remedy
# 018
Ask the receiving party to load paper into their fax machine.
Cause 1
Remedy
Cause 2
The receiving machine did not respond when your machine redialed.
Confirm that the receiving machine is able to communicate, and try again.
The documents could not be sent because the receiving machine was
performing another task.
Remedy
Cause 3
Confirm that the receiving machine is able to communicate, and try again.
The settings on your machine do not match the settings on the receiving
machine.
Remedy
Cause 4
Check that the settings on your machine match those on the receiving machine,
and that the receiving machine is able to communicate, and try again.
No pause was included in the telephone number when sending a fax overseas.
Remedy 1 Insert a pause after the country code, or after the fax number of the other party,
8
Remedy 2 Change the Long Distance setting on the Option screen if you are sending
documents to destinations stored in the Address Book. To access the Long
Distance setting, press
(Additional Functions) ➞ [Custom Fax Settings] ➞
# 022
Cause 1
Transferring could not be performed because all of the addresses stored in the
specified group destination have been deleted.
Remedy
Cause 2
Re-enter the group destinations, and try sending again.
Transmission could not be performed because the specified destination was
deleted while the documents were waiting to be sent.
Remedy
Re-enter the destination in the Address Book, and try sending again.
Error Messages
8-10
Download from Www.Somanuals.com. All Manuals Search And Download.
# 037
Cause
Documents could not be received because there was insufficient memory
available.
Remedy
Erase unnecessary documents and documents with errors from memory to
an Inbox," in the Mail Box Guide.)
# 080
Cause
A subaddress is not set in the remote machine.
Remedy
Try sending the document to the remote machine without a subaddress, or
request that the recipient set a subaddress.
# 081
Cause
A password is not set in the remote machine.
Remedy
Try sending the document to the remote machine without a password.
# 099
Cause
Sending was interrupted.
Try sending again.
8
Remedy
# 102
Cause
The subaddress and/or password do not match.
Remedy
Check the subaddress and/or password of the remote machine, make sure that
the subaddress/password you are sending with the document matches the
recipient's, and try again.
# 107
Cause
The document could not be sent because there was insufficient memory
available.
Remedy 1 Resend the document at a lower resolution.
Remedy 2 Erase unnecessary documents to make more memory available.
Remedy 3 If this problem occurs frequently, contact your local authorized Canon dealer.
Error Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
8-11
# 701
Cause
The specified Department ID does not exist, or the password has changed.
Remedy
Enter the correct Department ID or password using
the control panel, and try sending again.
-
(numeric keys) on
# 702
Cause
The document could not be sent because the memory is full.
Remedy 1 Wait a few moments, and try again after other send jobs complete.
Remedy 2 Do not send the document to too many recipients at the same time. Send the
document to a smaller number of recipients.
# 703
Cause
The memory for the image data is full.
Remedy 1 Wait a few moments, and try again after other send jobs complete.
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate
normally, turn the main power OFF, and then back ON.
# 704
8
Cause
An error occurred while reading address information from the Address Book.
Remedy
Check the address settings. If the machine still does not operate normally, turn
the main power OFF, and then back ON.
# 706
Cause
The Address Book is being imported or exported from the Remote UI, or it is
being used by another sending component.
Remedy
Wait until the Address Book Import/Export function from the Remote UI or the
other sending component is complete, and try sending again.
# 711
Cause
The inbox memory is full.
Remedy
Erase unnecessary documents stored in the inbox. (See "Printing and Erasing
an Inbox," in the Mail Box Guide.)
Error Messages
8-12
Download from Www.Somanuals.com. All Manuals Search And Download.
# 712
Cause
The maximum number of documents is already stored in the inbox.
Remedy
Erase unnecessary documents stored in the inbox. (See "Printing and Erasing
an Inbox," in the Mail Box Guide.)
# 829
Cause
Data that contains more than 1,000 pages is received.
Remedy
This machine can print or store up to 999 pages of data in memory, but will
delete any data that exceeds this limit. Ask the sender to resend the remaining
pages.
# 847
Cause
Could not save the received document in the Memory Box, as the memory of
the Memory Box is full.
Remedy
Erase unnecessary documents stored in the inbox. (See "Printing and Erasing
an Inbox," in the Mail Box Guide.)
# 851
8
Cause 1
Remedy
There is insufficient memory remaining in the system.
Check the system's available memory, and delete unnecessary documents in
"Using/Arranging Documents Stored in an Inbox," in the Mail Box Guide.)
Cause 2
Remedy
The scanned document cannot be stored because there are more than 2,000
documents in the specified inbox.
Erase unnecessary documents stored in the specified inbox. (See "Printing and
Stored in an Inbox," in the Mail Box Guide.)
# 852
Cause
An error occurred because the main power switch was turned OFF while a job
was being processed.
Remedy
Check to see if the main power switch is turned ON. Try processing the job
again, if necessary.
Error Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
8-13
# 995
Cause
Reserved communication jobs were cleared.
Reserve the jobs again, if necessary.
Remedy
8
Error Messages
8-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Questions & Answers
Q Can the machine automatically resend documents when there are errors in
transmission?
A Set Auto Redial in TX Settings in Custom Fax Settings (from the Additional Functions
screen). You can also make detailed settings, such as the redialing frequency and
Q What happens to documents that are sent to my machine while the power switch on the
control panel is turned OFF?
A These documents are automatically stored and printed when all of the documents have
been received.
Q What happens if fax documents arrive when the machine is being used for copying?
A While you are making copies, the documents are automatically received and stored in
the machine's memory, and will be printed automatically when you finish copying.
You can change the order in which these documents print. (See Chapter 4, "Customizing
Settings," in the Reference Guide.)
8
Q I frequently send documents using the same settings. Can the machine be set to
automatically restore those settings when the power is turned ON or after an operation
completes?
A Alternatively, you can set the desired settings as the Standard Settings so that they are
always specified when the machine is turned ON or after an operation completes.
Q What happens to received documents if a paper jam occurs while they are printing?
A If documents are not printed correctly, they are held in memory. When the paper jam is
cleared, printing resumes from the page at which the paper jam occurred.
Q What happens to a document that has not been completely received when a blackout
occurs?
A The document, up to the last page that was successfully received, is printed.
Questions & Answers
Download from Www.Somanuals.com. All Manuals Search And Download.
8-15
Q What happens to documents in memory and the memory settings if power is
interrupted?
A Documents that are stored in the system's memory remain in memory even when power
to the machine is interrupted. Similarly, the contents of the Address Book are also stored
permanently in memory. However, if power is interrupted while a document is being
received, it is not stored in memory. After the power is restored, the sender may resend
the interrupted job.
Q How can I save paper?
A You can set for received documents to be printed on both sides of the paper. (See
You can check a received document using the Remote UI (User Interface), or store the
received documents in memory, and then send them to a desired destination. (See
Functions," in the Remote UI Guide.)
You can set the machine to not print reports. Two kinds of reports are printed when an
error occurs while sending a fax. You can save paper by setting the machine to not print
Q Can I turn the machine's power OFF if a document is set with the Delayed Send setting?
A When you are not using the machine, you may turn OFF the control panel power switch
on the control panel, but leave the main power switch turned ON. Documents that are
set with the Delayed Send setting are automatically sent from memory when the
specified time arrives.
8
Questions & Answers
8-16
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Appendix
CHAPTER
This chapter provides the reports and lists of activity management, specifications, glossary,
and index.
Report and List Samples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
TX Report/Error TX Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2
Activity Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-8
User's Data List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-11
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-22
9-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Report and List Samples
NOTE
The fax numbers and addresses used in these sample reports are fictitious.
TX Report/Error TX Report
This report indicates items, such as the fax number of the party to which you sent
documents, the result of communication, and other information, to enable you to
check whether the documents were sent correctly to the intended destination.
You can set whether to automatically print a TX Report after sending documents.
9
NOTE
•
•
The default setting is 'For Error Only'.
■ REPORT NAME
When the document transmission is completed successfully, a "TX Report" is printed.
When a send error occurs, an "Error TX Report" is printed.
■ MESSAGE
A message describing the transmission result is printed.
Report and List Samples
9-2
Download from Www.Somanuals.com. All Manuals Search And Download.
■ JOB NO.
The four digit number, that is automatically assigned when the document is accepted for
sending, is printed.
■ DEPT. ID
If Department ID Management is set, the Department ID is printed.
■ DESTINATION ADDRESS
The fax number of the destination is printed, up to the first 20 digits.
■ PSWD/SUBADDRESS
A subaddress is printed, if specified. The password is not printed to maintain security.
■ DESTINATION ID
The name of the remote party is printed.
■ ST. TIME (Start Time)
The date and time (in 24-hour notation) at which the document started to transmit are
printed. The start time is printed only for send jobs that have been set with the Delayed
Send setting.
■ USAGE T
The time taken (in minutes and seconds) to send the document from start to finish is
printed.
■ PGS.
The number of pages that were sent successfully to the remote party is printed.
9
■ RESULT
If the documents were transmitted successfully, "OK" is printed.
If a sending error occurred, "NG" (No Good) is printed.
If a sending error occurred, the page number in which the error occurred and the error
code number are printed.
Report and List Samples
Download from Www.Somanuals.com. All Manuals Search And Download.
9-3
Multiple Communication Result Report
This report is used to check whether documents were sent successfully to the
intended destinations when a sequential broadcast transmission was performed.
You can set whether to automatically print a Multiple Communication Result Report
NOTE
•
You can also print a Multi TX/RX Report with an image of the sent original attached to it.
•
The default setting is 'For Error Only'.
■ JOB NO.
The four digit number, that is automatically assigned when the document is accepted for
sending, is printed.
9
■ DEPT. ID
If Department ID Management is set, the Department ID is printed.
■ PGS.
The number of pages that were sent successfully to the destinations is printed.
■ TX/RX INCOMPLETE
If a transmission is incomplete, the fax number and the name of the destination are
printed. If there is no applicable destination, "_ _ _" is printed.
■ TRANSACTION OK
The fax number and the name of the destination of a completed transmission are printed.
If there is no applicable destination, "_ _ _" is printed.
■ ERROR
If an error in transmission occurs, the fax number and the name of the destination are
printed. If there is no error, "_ _ _" is printed.
Report and List Samples
9-4
Download from Www.Somanuals.com. All Manuals Search And Download.
RX Report
This report is used to check if documents were received successfully in this
machine.
NOTE
■ REPORT NAME
An RX report is printed when the reception of the document is completed successfully,
and also when a receiving error occurs.
9
■ MESSAGE
A message describing the reception result is printed.
■ JOB NO.
The four digit number, that is automatically assigned when the document is received, is
printed.
■ DESTINATION ADDRESS
The fax number of the sender is printed, up to the first 20 digits.
■ PSWD/SUBADDRESS
A subaddress is printed, if specified. The password is not printed to maintain security.
■ DESTINATION ID
The name of the sender is printed.
Report and List Samples
Download from Www.Somanuals.com. All Manuals Search And Download.
9-5
■ ST. TIME (Start Time)
The date and time (in 24-hour notation) at which the document started to be received are
printed.
■ USAGE T
The time taken (in minutes and seconds) to receive the document from start to finish is
printed.
■ PGS.
The number of pages that were received successfully is printed.
■ RESULT
If the documents were received successfully, "OK" is printed.
If a reception error occurred, "NG" (No Good) is printed.
If a reception error occurred, the page number in which the error occurred, and the error
code number are printed.
Memory Inbox Reception Report
This report enables you to confirm that documents were received in a Memory Box.
You can set whether to automatically print a Memory Inbox Reception Report.
9
NOTE
■ INBOX NO./NAME
The number (00 to 49) and user assigned name of the Memory Box in which the
documents were received is printed.
Report and List Samples
Download from Www.Somanuals.com. All Manuals Search And Download.
9-6
■ JOB NO.
The four digit number, that is automatically assigned when the document is received, is
printed.
■ DESTINATION ADDRESS
The fax number of the sender is printed, up to the first 20 digits.
■ PSWD/SUBADDRESS
A subaddress is printed, if specified. The password is not printed to maintain security.
■ DESTINATION ID
The name of the sender is printed.
■ ST. TIME (Start Time)
The date and time (in 24-hour notation) at which the document started to be received are
printed.
■ USAGE T
The time taken (in minutes and seconds) to receive the document from start to finish is
printed.
■ PGS.
The number of pages that were received successfully is printed.
■ RESULT
If the documents were received successfully, "OK" is printed.
If a reception error occurred, "NG" (No Good) is printed.
9
If a reception error occurred, the page number in which the error occurred, and the error
code number are printed.
Report and List Samples
Download from Www.Somanuals.com. All Manuals Search And Download.
9-7
Activity Report
The Activity Report is a printed log that shows the results of send and receive jobs.
An Activity Report can be printed either automatically or manually.
An Activity Report is automatically printed when either the number of
communication transactions reaches 40, or a specified time is reached. You can set
NOTE
•
•
The default setting is 'On'.
If a field exceeds its display capacity, only those characters that fit in the display are
printed.
9
■ DEPT. ID
If Department ID Management is set, the Department ID is printed. The Activity Reports
are listed according to the Department ID.
■ ST. TIME (Start Time)
The date and time (in 24-hour notation) at which the document started to be sent or
received are printed. An asterisk (*) indicates a document that has already been printed.
■ DESTINATION ADDRESS
The name and fax number of the remote party are printed. If a subaddress or sender's
name has been specified, it is printed beneath the fax number.
Report and List Samples
9-8
Download from Www.Somanuals.com. All Manuals Search And Download.
■ NO.
The four digit number, that is automatically assigned when the document is accepted for
sending or receiving, is printed. Numbers between 0001 and 4999 are for sending, while
numbers between 5001 and 9999 are for receiving.
■ MODE
The type and mode of transmission are printed.
Transmission Type:
TX, Delayed TX, Sequential Broadcast TX, Delayed Sequential
Broadcast, Transfer TX, Direct TX, Manual TX, Memory Lock,
ECM TX
Reception Type:
Memory Box RX, Manual RX, Memory RX, Transfer RX, ECM
RX
Mode of Transmission:
G3, G3ECM
■ PGS.
The number of pages that were sent or received successfully is printed.
■ RESULT
"OK" or "NG" (No Good) and the transmission time are printed.
If the document has been successfully sent to the recipient, "OK" is printed.
If a sending error occurred, "NG" is printed, the number of pages that were sent
successfully, and the error code are printed on the second line. If none of the pages were
sent successfully, "0" is printed.
If you manually cancel a job which is being sent, 'STOP' is printed instead of the error
code.
9
Report and List Samples
Download from Www.Somanuals.com. All Manuals Search And Download.
9-9
Address Book List
You can print the contents of the Address Book and a standard list of one-touch and
coded speed dialing numbers registered in memory. Print this list manually as
■ DESTINATION NAME
The registered one-touch speed dialing numbers (001 to 200) are printed on the first line,
and the registered destination names are printed on the second line.
■ CLASS
The specified destination's class (transmission mode) is printed.
9
■ DESTINATION ADDRESS
The fax number is printed on the first line, and the subaddress on the second line if it is
specified.
• If the Class is "GROUP":
The destinations stored in the group address are printed on the second line and
continue down in a list.
Report and List Samples
Download from Www.Somanuals.com. All Manuals Search And Download.
9-10
Specifications
Specifications are subject to change without notice for product improvement or
future release.
Super G3 FAX Board
Item
Specifications
Telephone Line Used/
Number of Lines
Public Switched Telephone Network, Facsimile network, 1 line
8 pels*1/mm x 3.85 line/mm
8 pels*1/mm x 7.7 line/mm
8 pels*1/mm x 15.4 line/mm
16 pels*1/mm x 15.4 line/mm
Standard:
Fine:
Super Fine:
Ultra Fine:
Scan line Density
(Scan, Transmission)
Transmission Speed
Compression Method
Transmission Type
Super G3: 33.6 kbps, G3: 14.4 kbps
MH, MR, MMR, JBIG
Super G3, G3
Sending Original Sizes
Receiving Paper Sizes
11" x 17" to STMT
11" x 17" to STMT
9
ECM-MMR:
G3MR method:
G3MH method:
JBIG:
Approximately 3.2 seconds
Approximately 13 seconds
Approximately 13 seconds
Approximately 2.6 seconds
Transmission Times
Auto Dial Function
Image Memory
Address Book: 200 destinations
Approximately 8,000 pages
*1 Pels stands for picture elements (pixels).
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
9-12
Glossary
A
Activity Report
A record listing all documents that have been sent and received.
ADF
Automatic Document Feeder. Originals placed in the feeder are automatically fed
sheet by sheet to the platen glass for scanning. The feeder also automatically turns
over two-sided originals to make one- or two-sided copies.
ASCII code
ASCII (American Standard Code for Information Interchange) is a set of standardized
codes used to represent letters, numbers, punctuation marks, a few symbols, and
control characters. A seven digit (or seven bit) binary number can represent one of
128 distinct codes.
Auto Redial
When Auto Redial is set to 'On', the machine automatically redials the recipient's
facsimile number if the line was busy, or if there was a sending error. The machine will
wait two minutes (default) after the initial attempt before redialing. You can specify the
number of times that the machine redials, the length of the redial interval, and
whether to redial after a transmission error.
9
B
Batch Sending
Batch Sending enables you to scan different documents at different times, store them
in memory, and then send them all at once to any one destination at any time. The
reduction in transmission time saves you on transmission costs. Further savings can
be made if you set the machine to send during the time when telephone rates are
lower.
bps
Bits per second. The measure of transmission speed used in relationship to networks
and communication lines.
Glossary
9-13
Download from Www.Somanuals.com. All Manuals Search And Download.
C
CCITT/ITU-T
A committee that sets international standards for telecommunications. CCITT/ITU-T
was formerly known as CCITT (Consultative Committee for International Telegraph
and Telephone), but is now succeeded by ITU-T (International Telecommunications
Union-Telecommunications Sector).
Coded Speed Dialing
Enables you to automatically dial a facsimile number by pressing [Coded Dial] and a
three digit code. You can register up to <Max. Number> facsimile numbers for coded
speed dialing. When you register the facsimile number, you can also enter the
recipient's name, set the speed for the transmission, and other useful features.
Confidential Memory Box
To receive a confidential document, you must first create a Confidential Memory Box
by registering your subaddress and RX Password. The password is used to print out
confidential documents that you have stored in memory. Numbers (up to 20 digits),
including spaces, asterisks (*), and pound signs (#), can be used for the RX
Password. The machine prints a Confidential RX Report when you receive a
confidential document in your Confidential Memory Box.
Copy Ratio/Zoom Ratio
Numeric representation for the reduction or enlargement of an original.
D
9
Delayed Transmission
Also called "Delayed TX." You can set a time for a document to be sent, and you do
not have to be present when the document is sent at the specified time. You can
reserve up to 120 delayed transmissions.
Direct Sending
Use Direct Sending when the memory is full, and you still need to send a document.
Direct Sending scans and sends one page at a time without storing the document in
memory. This enables you to send a document even when the memory is full.
DNS server
Domain Name System server. A server which maintains a database that translates
the domain names of Internet servers, such as www.w3.org, into Internet Protocol
(IP) addresses, such as "18.176.0.26". This enables clients to connect to a server
with a host name rather than a numeric IP address.
Glossary
9-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Domain
A management concept that divides large scale networks into groups for identifying
individual computers and users. The Internet is managed by classifying domains
according to geographical location or type (business, organization, educational
institution, etc.).
dpi
Dots Per Inch. A measure of screen and printer resolution that is expressed as the
number of dots that a device can print or display per linear inch.
E
ECM
Error Correction Mode. Reduces system and line errors when sending or receiving
from another fax machine with ECM capability. ECM divides a page into blocks and
inspects each block for data lost through poor transmission. If part of the data is
missing in a certain block, ECM retransmits that data from the beginning of the block
until it confirms that all the data within the block has been transmitted successfully. In
this way, ECM guarantees that a good image can be received at the receiving end.
ECM is very effective where the telephone lines are in poor condition. However, ECM
slows the transmission speed, and you may turn this mode off, if it is not needed.
Error lamp
The error lamp flashes red when a paper jam occurs or the machine has run out of
toner or paper.
F
9
File server
A personal computer or workstation to which two or more users on client personal
computers can gain access via a LAN (Local Area Network), to share and use its hard
disk drive.
Fine
FTP
A resolution mode for sending originals at twice the detail of the Standard resolution
mode.
File Transfer Protocol. A client-server protocol enabling a user to transfer files on one
computer to and from another computer over a TCP/IP network. The File Transfer
Protocol also governs the client program with which the user transfers files.
Glossary
9-15
Download from Www.Somanuals.com. All Manuals Search And Download.
I
Internet Protocol (IP)
The underlying set of networking rules that describes how data is transmitted across
the Internet. Internet Protocol enables data from one computer to be split into
packets, and sent to another computer with a specific IP address.
IP address
Internet Protocol address. A 32-bit numeric address used by IP (Internet Protocol) to
specify a computer or device on the Internet. The IP address is usually written as four
numbers delimited by periods. For example, 128.121.4.5.
ITU-T
See CCITT/ITU-T.
J
JPEG
Joint Photographic Experts Group. An experts group file specification that defines a
standard for compressing (reducing the size of) photographic and photorealistic
image files. The image compression method used involves some loss of information,
and so reduces image quality. Files containing photographic images in Web pages
are generally compressed by using the JPEG format so they can be transferred
across the Internet more quickly.
L
9
Long distance dialing
When dialing or registering long distance numbers, you may need to insert a pause
within or after the telephone number. The destination and length of the pause differ
depending on the system. Contact your local authorized Canon dealer or local
telephone company if you experience difficulty in long distance dialing.
M
Memory box
The memory box enables you to set up an ITU-T subaddress and password, and use
advanced features, such as confidential sending and relay sending, with a fax
machine of any manufacturer that supports ITU-T standard subaddress/password
transactions.
Glossary
9-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Lock
Usually a document is printed as soon as it is received; but with Memory Lock, all
documents received are stored in memory until you enter a password to print them.
This enables you to attend to the documents at your own leisure, and prevents printed
documents from piling up in the output tray.
Memory Sending
Memory Sending scans documents into memory before dialing the number and
sending them. You can retrieve your original once scanning is complete, and you do
not have to wait until sending is complete.
N
NetBEUI
NetBIOS Enhanced User Interface. NetBEUI is a network protocol originally designed
by IBM, and later extended by Microsoft and Novell. In a small network, NetBEUI is
more efficient than other protocols, such as TCP/IP. It is supported natively by IBM
operating systems and Microsoft Windows to provide services, such as file sharing
and printing.
NetBIOS
Network Basic Input Output System. A program that enables applications on different
computers to communicate within a LAN (Local Area Network). NetBIOS is used in
Ethernet, Token Ring, and Windows NT/2000/XP networks.
NetWare
Novell NetWare. Novell's client-server network operating system for the IBM PC.
NetWare uses the IPX/SPX, NetBEUI, or TCP/IP network protocol. NetWare supports
MS-DOS, Microsoft Windows, OS/2, and Macintosh clients. NetWare for UNIX gives
users access to UNIX hosts.
9
O
OS/2
A family of multitasking operating systems developed by IBM for Intel x86-based
computers. OS/2 provides a graphic user interface similar to Windows, as well as a
command line interface similar to DOS. Add-ons to OS/2 enable it to run DOS and
Windows applications.
Glossary
9-17
Download from Www.Somanuals.com. All Manuals Search And Download.
P
Pause
You can insert a pause within a telephone number or at the end of a telephone
number. A pause is also sometimes required to connect to an outside line, or for
overseas fax transmissions to certain countries.
Pause Time
The default settings are two seconds if a pause is inserted within the telephone
number (may vary depending on your location), and 10 seconds if a pause is added
to the end of the telephone number. Only the length of pauses inside a telephone
number, and not those at the end, can be changed.
PBX
Private Branch Exchange. An in-house telephone switching system that interconnects
telephone extensions to each other, as well as to the external telephone network. A
PBX controls the flow of telephone traffic through instruments, such as paging
systems and automatic callback and dialing.
PIN Code
Personal Identification Number. To prevent unauthorized access to telephone lines,
some PBX (Private Branch Exchange) systems require that a PIN code be entered
when dialing to make a call or to send a document. Depending on the PBX system,
the PIN code may be entered before the number as a prefix, or after the number as a
suffix. If your PBX needs a PIN code to connect to an outside line, you can specify the
user data settings of the machine so that it prompts you for a PIN code every time you
dial.
9
Protocol
A set of rules that govern the transmission of data across a network. Examples of
protocols are FTP, DHCP, BOOTP, RARP, IPP, TCP/IP, and LDAP.
R
Relay broadcast
See Relay sending.
Relay sending
Also called "relay broadcast." You can send a document to a fax machine in a distant
location, and then have that fax machine relay the document to several destinations
within the same area.
Glossary
9-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolution
The density of dots attained by an output device, such as a fax, scanner, or printer, in
producing an image. Expressed in terms of dots per inch (dpi). Low resolution causes
font characters and graphics to have a jagged appearance. Higher resolution means
smoother curves and angles, as well as a better match to traditional typeface designs.
Resolution values are represented by horizontal data and vertical data (e.g., 600 x
600 dpi).
Rotary Pulse
Also called "pulse dial." On a rotary pulse telephone, a dial is turned to send pulses to
the telephone switching system.
RX
Abbreviation for "Reception/Receiving."
RX Password
The RX Password is needed to send or receive documents to and from a fax machine
that uses ITU-T standard subaddresses and passwords. If the passwords on both
ends do not match, the fax is not transmitted. Numbers of up to 20 digits, including
spaces, asterisks (*), and pound signs (#), can be used for the RX Password.
S
Scanning Area
The area that is actually scanned is slightly smaller than the size of the original
document, so words or images near the edges of the document may not be scanned.
Therefore, allow some margin space on all sides of the document that you are
sending.
9
Sender's Name
Your personal or organization's name. The sender's name, fax number, date, and time
sent are printed on each page that you send. You can register up to 99 sender names
that are selected using the TTI selector, before sending.
Sequential Broadcast
Sequential Broadcasting enables you to send a scanned document to up to 256
destinations simultaneously. If you frequently send documents to the same
destinations, it is highly recommended that you register the numbers as a group in a
one-touch button for group dialing.
SMB
Server Message Block. A protocol that provides file and printer sharing over a
network for Windows computers.
Glossary
9-19
Download from Www.Somanuals.com. All Manuals Search And Download.
SMTP
Simple Mail Transfer Protocol. A TCP/IP protocol for sending messages from one
computer to another on a network.
Stamp
Applies a stamp (about 1/8" (3 mm) in diameter) on the front side of originals after
they have been scanned, so that you can distinguish already scanned originals from
others.
Standard
Use this setting to send normal, typewritten, or printed documents containing only
text and no drawings, photographs, or illustrations. See Fine, Super Fine, and Ultra
Fine.
Subaddress
Subaddress is the global telecommunications standard specified by the ITU-T
(International Telecommunication Union-Telecommunication Standardization Sector).
When the remote party's machine supports the same standard, confidential or
relayed communications are possible by attaching a subaddress and a password in
advance.
Super Fine
A resolution mode for sending originals at four times the detail of the Standard
resolution mode. If the receiving machine does not support this mode, the document
is automatically sent in the Fine mode.
Super G3
Super G3 is a phrase used to describe the generation of fax machines that use ITU-T
V.34 standard 33.6 Kbps modems. Super G3 high-speed fax machines allow a
transmission time of approximately three seconds per page, which results in reduced
telephone line charges.
9
T
Telephone Line Type
Depending on the type of telephone line that you have, set the machine to touch tone
(T) or pulse (P) dialing.
Tone
Some data services may require that you use tone dialing. If you have a pulse dial
telephone, press [Tone] to switch temporarily from pulse to tone dialing when
connecting to these data services.
Glossary
9-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Transfer
You can arrange for all documents received in the main fax machine to be transferred
to another fax machine. For example, you can have your office fax transfer all
incoming documents to your home. You can specify the day of the week and time of
day at which this feature is activated. However, documents received in a Mail Box or
Confidential Mail Box cannot be transferred.
Transfer password
Protects the transfer settings from unauthorized access. You must enter the transfer
password (up to seven digits) to view or change the transfer settings.
Transmission Time
A fax transmission consists of three stages: the machine sending the fax connects
with the machine receiving it, the message is then transmitted, after which the sender
and the receiver exchange signals to confirm the end of transmission. The
transmission time described in this guide is not the total time required for the entire
transmission, but only the time taken for the message to transmit.
TTI
TX
Transmit Terminal Identification. Also called the TX Terminal ID. The TTI is the name
of a person or an organization and the facsimile number of the machine that sends a
document. In addition to the unit name that you register for the machine, you can
create up to 99 sender names that can be selected and used in place of the unit's
name when you send a facsimile.
Abbreviation for "Transmission/Sending."
9
U
UFR II
Ultra Fast Rendering II. A printing algorithm for realizing high speed monochrome
rendering. UFR II enables processing tasks to be executed and divided appropriately
between the host PC and the printer to greatly reduce overall printing time. The UFR
II printer driver supports only monochrome printers.
Ultra Fine
A resolution mode for sending originals at 16 dots/mm x 15.4 lines/mm (eight times
the standard resolution). If the receiving fax machine does not support this mode, the
original is automatically sent in the Super Fine or Fine mode.
Glossary
9-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
C
Canceling jobs
Using the Stop key, 1-43
Using the System Monitor screen, 1-43
Using the touch panel display, 1-42
CCITT/ITU-T, 9-14
A
Abbreviations used in this manual, xii
Coded Dialing key, 1-6
Coded Speed Dialing, 9-14
Communications settings
Automatic forwarding of received documents,
Activity report sample, 9-8
Address Book key, 1-7
Address book list sample, 9-10
ADF (Automatic Document Feeder), 9-13
ASCII code, 9-13
PIN code access, 6-28
Receive start speed, 6-6
Reception password, 6-30
Saving received documents in memory, 6-7
Send start speed, 6-3
Available paper sizes, 2-35
Confidential Memory Box, 9-14
Copyrights, xx
B
9
Batch Sending, 9-13
Custom fax settings table, 5-2
Before using this machine
Registering the machine's fax number, 1-19
Registering sender names, 1-21
Registering the Sending Record, 1-10
Registering the unit's name, 1-23
Selecting the type of telephone line, 1-12
Setting the date and time, 1-14
Setting the display language, 1-11
Setting the line type, 1-10
D
Date and time, setting, 1-14
Delayed transmission, 9-14
Delayed TX key, 1-8
Density, 2-3
Dark, 2-3
Things to do, 1-10
Light, 2-3
Standard, 2-3
Destinations, storing
Group destinations, 5-33
Index name, 5-39
Index
9-22
Download from Www.Somanuals.com. All Manuals Search And Download.
One-touch speed dialing keys, 5-19
One-touch speed dialing settings, 5-26
Dialing methods
Fax number, registering, 1-19
FCC (Federal Communications Commission), xiii
Group dialing, 2-26
File server, 9-15
Redialing, 2-18
Using coded speed dialing, 2-24
Using the address book, 2-19
Using the numeric keys, 2-16
Direct key, 1-6
Flow of sending operations, 1-26
FTP, 9-15
Direct Sending, 9-14
G
Glossary, 9-13
Display language, setting, 1-11
Displays used in this manual, xi
DNS server, 9-14
I
Document size
Registering, 3-25
Illustrations used in this manual, xii
Image quality, 2-3
Document Size key, 1-8
Domain, 9-15
dpi, 9-15
Internet Protocol (IP), 9-16
IP address, 9-16
E
9
J
Error lamp, 9-15
Error messages, 8-7
Error code list, 8-8
Self-diagnostic display, 8-7
K
Keys used in this manual, x
F
Fax Basic Features Screen, 1-6
Fax information services, 3-41
Fax jobs
L
Legal notices
Copyrights, xx
Disclaimers, xxi
Checking fax job details, 4-2
Checking/Changing the status of fax jobs, 4-2
Printing the TX job status/log, 4-6
Index
9-23
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC (Federal Communications Commission),
Vertical placement, 1-35
OS/2, 9-17
Super G3, xx
Overview, 1-5
Line type, setting, 1-10
P
Paper sizes, 2-35
Pause, 9-18
M
Pause Time, 9-18
Memory box, 9-16
Batch sending memory box, 3-7
Confidential memory box, 3-5
Erasing, 5-89
Pin Code key, 1-6
Placing originals
Printing and erasing documents, 3-11
Relay memory box, 3-6
Scanning originals, 3-8
Setting up, 5-65
About placing originals, 1-34
Document size, 1-34
Orientation, 1-35
Memory boxes, setting up
Batch sending memory box, 5-82
Confidential memory box, 5-66
Relay memory box, 5-71
Memory Inbox key, 1-8
Memory lock, 9-17
Printer settings
2 on 1 log, 5-63
Address book list, 7-14
Erasing received documents, 4-11
Forwarding received documents from memory,
Memory Sending, 9-17
Multiple Communication Result Report sample,
9
Paper drawer selection, 5-54
Reducing a received document, 5-58
User data list, 7-16
N
Protocol, 9-18
NetBIOS, 9-17
NetWare, 9-17
Q
O
On-hook key, 1-7
R
Orientation
Horizontal placement, 1-35
Receive jobs
Index
9-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking receive job details, 4-8
Checking/Changing the status of receive jobs,
S
Samples
Activity Report, 9-8
Erasing received documents, 4-11
Forwarding received documents from memory,
Address book list, 7-14
Memory Inbox Reception Report, 9-6
Multiple Communication Result Report, 9-4
RX Report, 9-5
Receiving print jobs and fax documents
Forward received documents, 2-33
Receiving documents into memory, 2-31
Receiving documents, 2-29
Redial key, 1-6
TX Report/Error TX Report, 9-2
User's Data List, 9-11
Scanning area, 9-19
Sender names, registering, 1-21
Sender's name, 9-19
Relay broadcast, 9-18
Relay sending, 9-18
Sender's Names (TTI) key, 1-9
Sending methods
Report settings
Activity Report, 7-6
Direct sending, 2-8
Address book list, 7-14
Memory Box RX Report, 7-12
RX Report, 7-10
Memory sending, 2-5
Sending manually, 2-10
Stamping originals, 2-14
Sending with a subaddress, 3-33
Sending record, registering, 1-10
Sequential broadcast, 1-46, 9-19
TX Report, 7-3
User data list, 7-16
Report Settings table, 7-2
Fine, 2-2
9
Special Features
Standard, 2-2
Changing the reception mode, 3-17
Changing the zoom ratio, 3-28
Delaying a send job, 3-2
Document size, 3-21
Super fine, 2-2
Ultra fine, 2-2
Resolution/Density/Image quality key, 1-6
Restricting new addresses, 6-33
RX, 9-19
Faxing two-sided originals, 3-19
Memory boxes, 3-5
Setting the sender's name as the terminal ID,
RX Mode key, 1-9
RX password, 9-19
Special Features key, 1-7
Special Features Screen, 1-8
Specifications, 9-12
RX report sample, 9-5
RX Settings, 5-50
ECM reception, 5-50
Printing footer information, 5-52
Stamp key, 1-6
Standard, 9-20
Index
9-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Subaddress, 9-20
Adjusting the alarm and monitor volume, 5-12
Changing the standard fax settings, 5-14
Subaddress key, 1-7
Super fine, 9-20
Registering the standard key, 5-4
Symbols used in this manual, ix
System Monitor key, 1-7
System Settings table, 6-2
Setting the standard density, 5-11
Z
Zoom ratio
T
Preset zoom, 3-29
Zoom by percentage, 3-31
Zoom TX key, 1-8
Troubleshooting
Other situations, 8-5
Receiving documents, 8-4
Sending documents, 8-2
9
TX report/error TX report sample, 9-2
TX Settings, 5-41
Auto redial, 5-45
ECM transmission, 5-41
Pause time, 5-43
U
Ultra fine, 9-21
Unit name, registering, 1-23
User's Data List sample, 9-11
User Settings
Index
9-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada
CANON EUROPA N.V.
Bovenkerkerweg 59-61 P.O. Box 2262, 1180 EG Amstelveen, The Netherlands
CANON FRANCE S.A.
17, quai du Président Paul Doumer 92414 Courbevoie Cedex, France
CANON (U.K.) LTD.
Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano, 8 - 20097 San Donato Milanese (MI) Italy
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A.
CANON AUSTRALIA PTY. LTD
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113, Australia
CANON CHINA CO., LTD
15F, North Tower, Beijing Kerry Centre, 1 Guang Hua Road, Chao Yang District, 100020, Beijing, China
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632
CANON HONGKONG CO., LTD
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
FA7-6760 (000)
092004IS2.5
CANON INC. 2004
PRINTED IN CHINA
©
Download from Www.Somanuals.com. All Manuals Search And Download.
|