Printer User Guide
•
•
•
Make sure you read this guide, including the “Safety
Precautions” section, before using the printer.
•
•
Click the buttons in the lower right to access other pages.
ENGLISH
: Next page
: Previous page
: Page before you clicked a link
Reading this guide will help you learn to use the printer
properly.
To jump to the beginning of a chapter, click the chapter
title at right.
Store this guide safely so that you can use it in the
future.
From chapter title pages, you can access topics by
clicking their titles.
Download from Www.Somanuals.com. All Manuals Search And Download.
© CANON INC. 2014
CEL-SU9VA210
1
Before Use
Safety Precautions
•
•
Images printed with this product are to be used for personal enjoyment.
Unauthorized printing of copyrighted material is prohibited.
•
•
•
Before using the product, please ensure that you read the safety
precautions described below. Always ensure that the product is used
correctly.
The printer warranty is valid only in the country or area of purchase. In
case of printer problems while abroad, return to the area of purchase
before contacting a Canon Customer Support Help Desk.
The safety precautions noted on the following pages are intended
to prevent injuries to yourself and other persons, or damage to the
equipment.
•
•
Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specifications, in rare cases some pixels may be defective or may
appear as red or black dots. This does not constitute a malfunction or
affect printed images.
Be sure to also check the guides included with any separately sold
accessories you use.
Warning
Denotes the possibility of serious injury or death.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before use.
• Store this equipment out of the reach of children and infants.
Mistakenly putting the power cord around a child’s neck could result in
asphyxiation.
Conventions in This Guide
In this guide, the printer is referred to as “SELPHY” or “the printer”.
Icons are used in this guide to represent buttons on SELPHY. Refer to
On-screen text or icons are shown in square brackets, as in [ ].
: Important information you should know
: Notes and tips for expert use
=xx: Pages with related information (In this example, “xx” represents a
page number.)
Instructions in this guide apply to the printer under default settings.
For convenience, all supported memory cards are simply referred to as
“memory card”.
• Use only recommended power sources.
•
•
• Do not attempt to disassemble, alter, or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interior of the product if
it has been dropped or otherwise damaged.
• Stop using the product immediately if it emits smoke, a strange
smell, or otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
• Do not let the product come into contact with water (e.g. sea water)
or other liquids.
•
•
•
•
•
•
• Do not allow liquids or foreign objects to enter the product.
This could result in electrical shock or fire.
If liquid comes into contact with the product, unplug it from the outlet and
consult your retailer or a Canon Customer Support Help Desk.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
This may cause overheating of or damage to the printer or adapter, which
may result in electric shock, burns or other injury, or fire.
High temperature may deform the product or adapters.
• Do not touch the printer or the power plug during thunderstorms.
This could result in electrical shock or fire. Immediately stop using the
equipment and distance yourself from it.
Denotes the possibility of damage to the equipment.
Caution
• Unplug the power cord periodically, and using a dry cloth, wipe away
any dust or dirt that has collected on the plug, the exterior of the
power outlet, and the surrounding area.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use if
the power cord or plug are damaged, or not fully plugged into the
outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact
the terminals or plug.
• Do not cut, damage, alter, or place heavy items on the power cord.
This could result in electrical shock or fire.
• Unplug the product from the power outlet when you are not using it.
• Do not place anything, such as cloth, on top of the printer while in
use.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
• Never reuse paper for printing, even if most of the paper is blank, as
shown.
Reusing paper may damage the printer if paper jams or the ink sheet
adheres to the paper.
• Do not play the supplied CD-ROM(s) in any CD player that does not
support data CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the
loud sounds of a CD-ROM played on a music CD player. Additionally,
playing the CD-ROM(s) in an audio CD player (music player) could damage
the speakers.
• Do not unplug the printer while it is printing.
Caution
Denotes the possibility of injury.
If you accidentally turn the printer off while printing, restart it and wait until
the paper is ejected. If paper jams and cannot be removed, contact your
retailer or a Canon Customer Support Help Desk. Do not attempt to remove
jammed paper by force, which may damage the printer.
• Do not stick any part of your hand into the printer interior.
• Place SELPHY in a safe location where people will not trip over the
power cord.
• Do not use the printer near motors or other devices that generate
strong magnetic fields, or in dusty environments.
This may damage the printer or cause malfunction.
Failure to do this may lead to injury or printer damage.
• Avoid using, placing, or storing the product in the following places:
• Places subject to direct sunlight
• Places subject to temperatures above 40 °C (104 °F)
• Humid or dusty places • Places subject to strong vibration
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Contents
Part Names
Package Contents .........................2
Ink and Paper (Sold Separately)....2
Before Use.....................................3
Conventions in This Guide.............3
Safety Precautions.........................3
Contents.........................................5
Part Names....................................5
Printing via Wi-Fi............ 30
Ink Cassette Lock
Printing from a Smartphone.........31
Printing from a Camera................34
Printing from a Computer.............36
Other Wi-Fi Functions..................44
Printing via AirPrint.......................46
Paper Cassette
Paper Cassette
Compartment Cover
Ink Cassette
Ink Cassette
Compartment Cover
Computer USB Port
Camera / Flash Drive
Basic Operations ............. 7
Printing via USB Cable... 48
Initial Preparations.........................8
Supported Cards/Images.............13
Printing Images............................14
Storing Prints ...............................17
After Printing................................17
Printing from a Computer.............49
Printing from a Camera................52
DC IN (Power Input)
Troubleshooting............. 53
Paper Ejection
Slot
Security Slot*
* Security cables, such as a Kensington lock, can be attached to this slot.
Appendix........................ 58
Print Settings................. 18
Printing without a Power Outlet ...59
Specifications...............................60
Handling and Maintenance..........62
Printing All Images.......................19
Cropping Images .........................20
Printing ID Photos........................21
Adjusting Settings........................23
Wi-Fi (Wireless LAN)
Precautions..................................62
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Controls
On-Screen Information
Shooting date of current image
Paper orientation
File number
Port/slot
Print size
(Postcard size shown here)
Cropping
(Dimmed when unavailable)
Total prints
Prints of current image
Icons in This
Guide
Name
Function
Displays images, setting screens, or
Switching Display Modes
–
Screen (LCD monitor)
Press the <-> button for full-screen display at higher resolution. The print
area is outlined. Press the <-> button to restore single-image display.
Press the <0> button to view nine images at once. Press the <0> button
to restore single-image display.
ON button
<q>
<k>
MENU button
Displays the editing menu and rotates
the crop frame
–
EDIT button
OK button
Confirms the selected item
<o>
<u>
<d>
<l>
<r>
Up / More prints button
Down / Fewer prints button
Left button
Specifies the print quantity or selects
setting items
Switches images, changes setting values
Right button
Switches display modes, enlarges the
crop frame
Switches display modes, reduces the
crop frame
Enlarge button
Reduce button
<->
<0>
BACK button
PRINT button
<v>
<p>
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Basic Operations
This chapter introduces basic printing operations such as preparing the printer, selecting images
on a memory card, and specifying the number of prints.
Initial Preparations....................................................................................8
Printing Images .......................................................................................14
Preparing the Ink Cassette................................................................................8
Preparing the Paper Cassette...........................................................................9
Loading the Cassettes ....................................................................................10
Installing and Plugging in SELPHY.................................................................10
Display Language ...........................................................................................12
Avoiding Left Over Paper................................................................................16
Printing from USB Flash Drives ......................................................................16
Making One Print from a Selected Image .......................................................16
Storing Prints ..........................................................................................17
After Printing ...........................................................................................17
Supported Cards/Images........................................................................13
Supported Memory Cards...............................................................................13
Supported Images...........................................................................................13
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Initial Preparations
Prepare for printing as follows. This example shows a Postcard-size (4x6
followed for other sizes.
Avoid getting dust on ink sheets or paper, which may cause banding or
• Do not hold the ink cassette with wet hands. Avoid touching the
ink sheet, and avoid getting dust on it. Dirt or moisture may cause
banding or affect print quality, tear ink sheets and prevent printing,
• When turning the sprocket, turn it gently, only until the sheet is taut.
Forcing the sprocket or overtightening it may tear ink sheets and
prevent printing, or SELPHY may run out of ink before paper.
• Never reuse ink cassettes, which may damage the printer or cause
malfunction.
Preparing the Ink Cassette
Check the ink cassette and ink
sheet.
zzHolding the ink cassette without touching
the ink sheet, check the size (such as
“Postcard (4x6 in.) Size” or “Card Size”)
to make sure it matches the size of paper
Ink sheet
you will print on.
zzMake sure the ink sheet is taut. Loose
ink sheets may tear when loaded. If
the sheet is loose, turn the sprocket as
shown.
zzFor an ink cassette that has a lock on
the bottom, press the lock (as shown)
to release it as you turn the sprocket to
make the sheet taut.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Preparing the Paper Cassette
1 Check the paper size.
4 Close the inner cover.
zzClose the inner cover firmly until it clicks
into place. Leave the outer cover open
when printing.
zzCheck the size on the paper cassette
(such as “Postcard” or “Card Size”) to
make sure it matches the size of the ink
cassette.
2 Open both covers.
• Use only paper in a genuine Canon Color Ink / Paper Set for
SELPHY CP printers. Other paper, such as regular postcards or
paper for SELPHY ES printers, cannot be used.
• Never do the following, which may damage the printer or cause
malfunction.
zzThere are two layers of covers. First open
the outer cover ( ), and then the inner
cover ( ).
3 Load the paper.
zzLoad the paper in the paper cassette.
zzThe paper cassette holds up to 18
sheets. Loading 19 or more sheets may
damage the printer or cause malfunction.
zzHolding the paper as shown, load it with
the glossy side up. (Do not touch the
glossy side of the paper, which may affect
print quality.)
- Loading paper upside-down, with the glossy
and back sides reversed
Glossy
side
- Bending or separating paper at the
perforations before printing
- Using label paper whose upper label surface
is peeling off or has been partially pulled up
- Writing on paper before printing
- Reusing paper, as by printing on blank areas
zzRemove any protective sheets from
the paper, and load only paper into the
cassette.
• Do not touch the springs on the paper
cassette.
Accidentally bending the springs may
Springs
zzWhen making postcard prints with space
for a stamp, load the paper with the
stamp area facing as shown.
prevent efficient paper feeding.
• Note that one spring is attached in the center on the top of card-size
paper cassettes.
• Avoid touching or rubbing the glossy, printing side of the paper. Do
not handle paper with wet hands, and keep paper free of dust. Dirt
or moisture may cause banding or affect print quality, or damage the
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Loading the Cassettes
Installing and Plugging in SELPHY
1 Open the covers.
More than
length of
paper
1 Choose the right place to put
SELPHY.
zzOpen the ink and paper compartment
covers.
zzPlace the printer on a table or other flat,
stable surface. Never place the printer on
an unstable or tilted surface.
zzKeep the printer away from sources of
electromagnetism or strong magnetism.
zzLeave at least 10 cm (4 in.) of open
space around the printer.
Minimum
10 cm
(4 in.)
2 Load the ink cassette.
zzInsert the ink cassette into the printer in
the direction of the arrow on the cassette
until it clicks into place.
zzLeave more open space behind the
printer than the length of paper used, so
that the paper can pass in and out of the
printer freely when printing.
Minimum
10 cm (4 in.)
zzClose the ink cassette compartment
cover.
3 Load the paper cassette.
2 Plug the adapter cord into
zzMaking sure the outer cover is open
the way into the compartment.
SELPHY.
zzInsert the adapter plug fully into the
power inlet on SELPHY.
3 Connect the power cord.
zzConnect the power cord to the compact
power adapter, and then plug the other
end into a power outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
• Do not use the printer near motors or other devices that generate
strong magnetic fields, or in dusty environments. This may damage
the printer or cause malfunction.
• Do not place the printer near televisions or radios. This may cause
the printer to malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Display Language
Change the language of menus and messages.
4 Access the language setting
screen.
zzPress the <u><d> buttons to select
[
Language], and then press the
1 Turn on SELPHY.
<o> button.
zzHold the <q> button until the screen at
left is displayed.
zzTo turn off SELPHY, hold the <q> button
again until the screen changes.
2 Raise the screen (LCD monitor).
zzNever force the screen up more than 45°,
which may damage the printer or cause
malfunction.
5 Choose a language.
zzPress the <u><d><l><r> buttons
to select a language, and then press the
<o> button.
Approx. 45°
zzTo return to the screen in step 2, press
the <v> button twice.
3 Access the setting screen.
zzPress the <k> button.
zzPress the <u><d> buttons to select
[Change Settings], and then press the
<o> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Supported Images
JPEG images conforming to the Exif standard can be printed with SELPHY.
Supported Cards/Images
Supported Memory Cards
• Images may not be displayed or printed correctly depending on their size or if
they have been edited on a computer.
No Adapter Required
• SD Memory Card
Adapter Required (Sold Separately)
• miniSD Memory Card
• SDHC Memory Card
• miniSDHC Memory Card
• microSD Memory Card
• microSDHC Memory Card
• microSDXC Memory Card
• SDXC Memory Card
• For memory cards that require an adapter, always insert the card
into the adapter before inserting the adapter into the card slot.
If you mistakenly insert the memory card into the card slot without
an adapter, you may not be able to remove the card from the printer.
• Use a memory card formatted with the device you shot the photos
with. Images on cards formatted with a computer may not be
recognized.
• For instructions, refer to the memory card or adapter user manual.
USB Flash Drives
You can print images on USB flash drives (sold separately) by inserting the
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Printing Images
Select images and specify the number of prints as follows. Here, printing
from an SD memory card is described as an example, but you can print
from other memory cards with the same steps.
4 Choose an image.
zzPress the <l><r> buttons to select an
image to print.
zzTo jump forward or back by five images,
hold down the <l><r> buttons.
5 Specify the number of prints.
1 Turn on SELPHY.
Prints of current image
Total prints
zzPress the <u><d> buttons to specify
the number of prints.
zzHold the <q> button until the screen at
left is displayed.
zzTo increase or decrease the quantity
by five prints, hold down the <u><d>
buttons.
zzTo turn off SELPHY, hold the <q> button
again until the screen changes.
2 Raise the screen (LCD monitor).
zzTo print other images at the same time,
repeat steps 4 – 5.
zzNever force the screen up more than 45°,
which may damage the printer or cause
malfunction.
Approx. 45°
3 Insert the memory card into the
slot.
zzInsert the memory card facing as shown
until it clicks into place.
zzTo remove the card, push it in until it
clicks, and then slowly release it.
Label side
zzThe image display screen used in the
Download from Www.Somanuals.com. All Manuals Search And Download.
14
6 Print.
• Never pull out the paper cassette, open the ink cassette
compartment cover, or remove a memory card while printing or
when you hear printer operation sounds immediately after it has
been turned on. This may damage the printer.
• To cancel printing in progress, always press the <v> button.
Printing cannot be canceled by pressing the <q> button, and
unplugging the printer may damage it.
zzPress the <p> button to start printing.
zzWhile printing, paper passes in and out
of the back of SELPHY several times.
Do not touch the paper until printing is
finished and the print is ejected onto the
paper cassette.
zzDo not allow 19 or more prints to
collect in the ejection area on the paper
cassette.
• Image display in step 4 may take some time when memory cards contain
many images.
• You can specify up to 99 images in step 4 and up to 99 prints per image in
zzTo cancel printing in progress, always
press the <v> button.
step 5. However, the total number of prints cannot exceed 999.
7 Add more paper as needed.
• Even if you press the <v> button to cancel printing, the printer will continue
printing until the current sheet is finished.
zzIf a message indicates that the paper
has run out, remove the paper cassette
without turning off the power.
and reinsert the cassette in SELPHY
8 Change the ink cassette as
needed.
zzIf a message indicates that the ink
has run out, open the ink cassette
compartment cover without turning off the
power.
zzTo remove the ink cassette, move the
lock in the direction shown. Insert a new
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Avoiding Left Over Paper
Making One Print from a Selected Image
Note the following to prevent wasted paper, which occurs if ink is consumed
faster than the paper.
For a convenient way to make a single print of a selected image, follow
these steps.
•
•
Do not turn the sprocket too much when removing slack from the ink
To cancel printing in progress, always press the <v> button; after
pressing the <v> button, never turn off the power before SELPHY is
finished printing (step 6).
Choose and print an image.
zzChoose an image as described in steps
zzPress the <p> button for a single print
of the selected image.
•
If a message indicates that the paper has run out, add paper without
turning off the printer or removing the ink cassette (step 7). Otherwise,
press the <v> button to cancel printing (step 6).
• A single print is not produced this way if you follow steps 4 – 5 in
of prints. To use this method for individual prints, make sure the
Note that under some conditions, even if you follow these instructions, ink
may be consumed faster than the paper, leaving you with excess paper.
Printing from USB Flash Drives
Images on USB flash drives (sold separately) can be printed the same way
as images on memory cards.
Insert a USB flash drive.
zzRemove any inserted memory cards.
zzInsert a USB flash drive as shown.
zzAfter this, all steps are the same as for
printing images from memory cards
• Some USB flash drives may be more difficult than others to insert and remove,
and some may not work as expected.
• For instructions, refer to the flash drive user manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Storing Prints
After Printing
•
To remove any extra paper from the
edges of a print, fold the paper along the
perforations and tear the edges off.
flash drives.
Lower the screen for storage.
Unplug the power cord from the outlet and disconnect the adapter plug
from SELPHY.
• If the compact power adapter is still warm, wait for it to cool down
before putting it away.
Remove the paper cassette and close the paper cassette compartment
cover. Leave any remaining paper in the cassette, and store the
cassette in a dark, cool, and dry place away from dust.
• Leave the ink cassette in SELPHY.
• Store SELPHY on a flat surface, away from sunlight and dust. Any
dust that gets inside SELPHY may cause white banding on photos
or damage the printer.
•
•
When writing on prints, use an oil-based
pen.
To prevent discoloration, do not store
prints where temperatures exceed 40 °C
(104 °F), in humid or dusty places, or in
direct sunlight.
•
•
Also avoid the following actions, which may cause discoloration, fading,
or bleeding: sticking tape on the printed surface, allowing the printed
surface to contact vinyl or plastic, applying alcohol or volatile solvents to
the printed surface, or leaving the printed surface pressed firmly against
other surfaces or objects over extended periods.
When storing prints in an album, choose an album with photo covers
made of nylon, polypropylene, or cellophane.
• Store any extra ink cassettes in the original package or a bag, away
from sunlight and dust.
• Store any unused paper or ink cassettes in their unopened
packages, away from sunlight.
• Color may change over time or depending on storage conditions.
Canon cannot be held liable for discoloration.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Print Settings
Explore a variety of printing features in this chapter, such as cropping images, preparing ID
photos, and enhancing images.
Choosing a Layout (Page Layout)...................................................................25
Optimal Prints with Auto Correction (Image Optimize)....................................26
Adjusting the Brightness .................................................................................26
Making Skin Look Smooth (Smooth Skin).......................................................27
Adjusting the Color Tone (My Colors) .............................................................27
Reducing the Appearance of Red-Eye (Correct Red-Eye)..............................28
Printing with the Date (Date)...........................................................................28
Changing How the Date Is Displayed (Date Format)......................................29
Saving Energy (Auto Power Down).................................................................29
Printing All Images..................................................................................19
Cropping Images.....................................................................................20
Printing ID Photos...................................................................................21
Cropping Passport Images..............................................................................22
Adjusting Settings ..................................................................................23
Configuring Settings........................................................................................23
Choosing the Finish (Print Finish)...................................................................24
Printing with a Border around Images (Borders).............................................24
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Printing All Images
Print all images on a memory card at once as follows.
3 Choose the number of prints.
zzPress the <u><d> buttons to specify
the number of prints.
1 Access the menu.
zzPress the <k> button.
Number of
images on card image
Number of sheets
required
Prints per
2 Access the setting screen.
zzPress the <u><d> buttons to select
[Print All Images], and then press the
<o> button.
4 Print.
zzPress the <p> button to start printing.
zzTo cancel printing, press the <v> button.
• If the memory card contains more than 1,000 images, the 999 most recent
images are printed, as determined by shooting date.
• You can specify up to 99 prints in step 3. However, the total number of prints
cannot exceed 999.
(For example, you can specify up to nine prints of each image if the card
contains 100 images.)
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Cropping Images
Print only selected areas of an image as follows.
3 Confirm the setting.
zzTo confirm the cropping area and return
to the image display screen, press the
<o> button.
lower left.
is now shown in the
1 Access the cropping screen.
zzChoose an image as described in step 4
EDIT button, and then press the <o>
button.
zzTo crop other images for printing with the
first one, repeat steps 1 – 3.
4 Print.
zzPrint as described in step 6 of “Printing
zzA crop frame is displayed, showing the
image area that will be cropped.
zzAfter printing, crop settings are cleared.
• To adjust the cropping area once you have set it, press the EDIT button on the
image display screen, press the <u><d> buttons to select [Adjust Cropping],
and then press the <o> button. Repeat steps 2 – 3.
• To cancel cropping after you have set the cropping area, press the EDIT button
on the image display screen, press the <u><d> buttons to select [Reset
Cropping], press the <o> button to access the reset cropping screen, and
then press the <o> button again.
2 Adjust the image area to crop.
zzTo switch the crop frame between portrait
and landscape orientation, press the
EDIT button.
• Cropping areas you have set are cleared if you turn off SELPHY or remove the
memory card before printing.
zzTo move the crop frame, press the
<u><d><l><r> buttons.
zzTo enlarge the crop frame, press the
<-> button, and to reduce it, press the
<0> button.
• You can specify cropping for up to 99 images at once.
• Cropping is not available when printing with [Print All Images] or [DPOF Print]
Index] or [
Shuffle].
• The cropping aspect ratio indicated by the frame displayed on images cannot
be adjusted.
• To change the number of prints, press the <u><d> buttons on the image
display screen in step 3. Note that specifying zero prints will not clear cropping
settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Printing ID Photos
2 Specify the finished size of the
photo.
zzPress the <l><r> buttons to specify
how the size is determined.
zz[Custom]: Press the <u><d> buttons
to select [Long Side], and then press the
<l><r> buttons to specify the length.
Specify the [Short Side] length, and then
press the <o> button again. Note
that options available for [Short Side]
are automatically updated based on the
[Long Side] length.
Images can be printed for use in photo identification. Choose from [Custom]
or [Standard]* sizes.
Two different images can be printed on each sheet.
* The dimensions of [Standard] conform to ICAO international standards.
zz[Standard]: Check the indicated image
size and press the <o> button.
3 Choose an image to print.
1 Specify ID photo printing.
zzPress the <k> button.
zzPress the <u><d> buttons to select [ID
Photo], and then press the <o> button.
zzPress the <l><r> buttons to select an
image, and then press the <u> button.
is shown in the lower right. You can
choose one or two images.
press the EDIT button.
zzPrint as described in step 6 of “Printing
zzSettings are cleared after printing.
• The photo may not be accepted as an official ID photo, depending on the
intended purpose. For details, contact the institution that requires the photo.
• Card-size paper cannot be used.
• [Borders] settings are not applied, and dates are not printed.
• Selecting two images in step 3 will produce an equal number of prints of each
image per sheet, in your specified layout. Note that for layouts with an odd
number of prints per sheet, the center frame on the sheet will be blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Filtering Candidate Image Sizes
Many image size options are listed when you select [ID Photo]
Cropping Passport Images
►
[Size
►
zzTwo cropping guide lines are displayed
Selection]
[Custom]. To simplify size selection, you can edit the list to
show only sizes used most often.
when you access the crop frame
selected in [ID Photo].
1 Access the setting screen.
zzOn the ID photo settings screen, choose
zzTo print a photo that conforms to passport
standards for face size and position,
adjust the crop frame so that one line is
above the head and the other is below
the chin.
►
[Size Selection]
and then press the EDIT button.
2 Select sizes for display.
zzTo remove a size from the list, press the
<u><d><l><r> buttons to select the
size, and then press the <o> button.
zzThe check mark ( ) is cleared, and the
size will no longer be listed on the [ID
include a size in the list, press the <o>
button again to select the size, displaying
.
• For specific requirements other than face size and position, contact the
institution that requires the photo.
zzPressing the EDIT button clears all
.
When no sizes are selected, pressing the
EDIT button selects all sizes, displaying
.
zzOnce you have selected the sizes to
include in the list, press the <v> button.
• A warning message is displayed if you press the <v> button when no sizes
are selected. Press the <o> button to return to the [Sizes] screen. Select at
least one size to list, and then press the <v> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Configuring Settings
Adjusting Settings
You can enhance images in several ways before printing. Add the shooting
date, adjust colors, and more. Settings apply to all images, so there is no
need to adjust each image individually.
1 Access the setting screen.
zzPress the <k> button.
zzPress the <u><d> buttons to select
[Change Settings], and then press the
<o> button.
Configurable Items
Description
Choose the surface finish of prints.
Print images with or without a border.
Choose the number of images per sheet.
Automatically correct images, for optimal quality.
Adjust image brightness in a range of –3 to +3.
Make skin appear smooth and beautiful.
Choose special color tones to make prints look
distinctive, or choose sepia or black-and-white prints.
2 Select an item and adjust the
Correct images affected by red-eye.
setting.
Add camera shooting dates when you print.
Adjust the date format.
zzPress the <u><d> buttons to select an
item.
zzPress the <l><r> buttons to adjust the
settings, and then press the <v> button
to confirm your choice.
Specify automatic power-off when the printer is idle.
Change the language of menus and messages.
zzPress the <v> button again to return to
the image display screen.
feature.
3 Print.
press the < > button to print.
p
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Choosing the Finish (Print Finish)
Printing with a Border around Images
(Borders)
Example of finish
zzPrint images with or without a border.
[Glossy]
[Pattern 1]
[Pattern 2]
zz Borderless (default) /
Bordered
zzBy adding a subtle texture to the surface of prints, you can create a less
glossy finish.
• Turning off SELPHY will restore the default setting of [
Borderless].
Prints with a glossy surface finish.
Glossy (default)
Pattern 1
Applies a slightly rough surface pattern, for a less glossy finish.
Applies a fine surface pattern, for a less glossy finish.
set to [
Index] or [
Shuffle].
Pattern 2
8-up] even if [
Bordered] is selected.
• The surface finish may be less noticeable depending on the
printer’s internal temperature when you turn it on. Before turning
on the printer and printing, wait until it has adjusted to an ambient
temperature of 10 – 35 °C (50 – 95 °F).
• Turning off SELPHY will restore the default setting of [Glossy].
• You can have SELPHY retain configured settings even after being turned off.
With SELPHY off, hold down the <k><u><p> buttons, and then hold down
the <q> button until “SELPHY” is displayed. If you prefer SELPHY not to
retain configured settings, repeat this procedure after turning SELPHY off. This
settings when turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Combining Images of Various Sizes (Shuffle)
Choosing a Layout (Page Layout)
zzUse the shuffle feature to have images arranged automatically in a
variety of sizes.
zzChoose the number of images per sheet. Your specified quantity of prints
zzGroups of up to 8 or 20 images can be printed on a single sheet.
buttons to select [Page Layout]. Press the
[
8-up].
1-up (default)
2-up
One image per sheet
Eight images per sheet
8-up
<l><r> buttons to select [
Shuffle],
Two images per
sheet
Many small, uniform size
images per sheet
Index
and then press the <o> button.
zzOn the screen at left, press the <u><d>
buttons to select an item.
Four images per
sheet
Images in a variety of
sizes on a single sheet
4-up
Shuffle
zzPress the <l><r> buttons to adjust the
settings, and then press the <v> button
to confirm your choice.
• Turning off SELPHY will restore the default setting of [
1-up].
• You can have SELPHY retain the configured layout even after being turned off
• The position of images cannot be specified.
zzPress the <v> button twice to return to
the image display screen.
• Depending on the configured layout, images may not be printed with the
• The position of images cannot be specified.
• It may take some time before printing begins.
Index] selected, allows you
to print all images on the memory card as an index.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Optimal Prints with Auto Correction
(Image Optimize)
Adjusting the Brightness
zzAdjust image brightness in a range of –3 to +3.
zzChoose larger positive values to make images brighter, or larger negative
values to make them darker.
zzAutomatically correct images, for optimal quality.
zz Off /
On (default)
• Turning off SELPHY will restore the default setting of [±0].
• Some images may not be adjusted correctly.
• When [
[Brightness] are not applied.
• Turning off SELPHY will restore the default setting of [
On].
• When [
not applied.
• The degree of correction may vary depending on layout and paper size.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Making Skin Look Smooth (Smooth Skin)
Adjusting the Color Tone (My Colors)
zzMake skin appear smooth and beautiful.
zzChoose special color tones to make prints look distinctive, or choose
sepia or black-and-white prints.
zz Off (default) /
On
Saturated, natural
colors, as produced
with positive film
• Correction may be applied to image areas other than skin in some
cases, and results may not be as expected.
–
Off (default)
Vivid
PositiveFilm
Sepia
Vivid prints with greater
contrast and color
saturation
• The default setting of [
Off] is restored after printing, when SELPHY is
Sepia-tone
turned off, or when a memory card is removed.
• When [
applied.
Subdued prints with
less contrast and color
saturation
Black and white
B/W
Neutral
• Turning off SELPHY will restore the default setting of [
Off].
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Reducing the Appearance of Red-Eye
(Correct Red-Eye)
Printing with the Date (Date)
08/08/2013
zzAdd camera shooting dates when you print.
zz Off (default) /
On
zzCorrect images affected by red-eye.
• To prevent two instances of the date on images already labeled by
the camera, select [ Off].
zz Off (default) /
On
• Red-eye correction may mistakenly be applied to areas of the image
• Turning off SELPHY will restore the default setting of [
Off].
other than the affected eyes. To avoid this, select [
images affected by red-eye.
On] only for
• The date added to prints cannot be changed, because it is the date assigned
by the camera when the photos were taken.
• Turning off SELPHY or removing the memory card will restore the default
setting of [ Off].
Shuffle].
Index] or
[
• Red-eye may not be detected or corrected well on faces covering a very large/
small area of the screen, on bright/dark faces, in shots from the side of or at an
angle to the face, or when part of the face is not visible.
2-up], [
Sepia] or [ B/W].
4-up], [
8-up], or [
Index].
[
• The degree of correction may vary depending on cropping, page layout, and
paper size.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Changing How the Date Is Displayed
(Date Format)
Saving Energy (Auto Power Down)
zzSELPHY turns off automatically if left idle for about five minutes.
zzOn (default) / Off
multiple images, [Could not print some images! Cancel printing?]
is displayed and printing stops. If [Auto Power Down] is [On] and
SELPHY is not operated for approximately 5 minutes, printing is
canceled and SELPHY turns off. When you turn SELPHY on again,
a blank sheet of paper may be ejected, but never reuse ejected
Note that after printing stops, SELPHY will continue to consume
saving begins.
08/08/2013
2013/08/08
zzmm/dd/yyyy (default), dd/mm/yyyy, or yyyy/mm/dd
• The setting is retained even when SELPHY is turned off or memory cards are
removed.
• SELPHY does not turn off automatically when connected to other devices via
USB or Wi-Fi, or when an error message is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Printing via Wi-Fi
This chapter describes how to wirelessly print images saved to Wi-Fi®*1-compatible smartphones
and computers.
•
This printer is a Wi-Fi certified product. You can wirelessly print images from Wi-Fi-supporting smartphones*2, tablets*2,
cameras*3, and computers.
*1
Wi-Fi is a brand name that indicates interoperability certification of wireless LAN devices.
*2
Requires installation of the dedicated Canon Easy-PhotoPrint app on your smartphone or tablet. (There is no need to install the
dedicated application when printing from an AirPrint-compatible application (=46).) Visit the Canon website for application details,
including supported devices and available functions. For convenience in this manual, smartphones and tablets are collectively referred
to as “smartphone”.
*3
Devices must be compatible with DPS over IP, the PictBridge standard for Wi-Fi connections.
• Some features are not available when printing via Wi-Fi.
• For convenience in this manual, wireless routers and other base stations are referred to as “access point”.
Disabling Wi-Fi................................................................................................44
Checking Wi-Fi Settings Information...............................................................44
Changing the Printer Name.............................................................................44
Specifying the Communication Protocol .........................................................44
Returning the Wi-Fi Settings to Default...........................................................45
Entering Information........................................................................................45
Printing from a Smartphone...................................................................31
Subsequent Printing........................................................................................33
Printing from a Camera ..........................................................................34
Subsequent Printing........................................................................................35
Printing from a Computer.......................................................................36
Confirming Access Point Compatibility............................................................36
Connecting the Printer to the Access Point.....................................................37
Subsequent Connections................................................................................41
Preparing the Computer..................................................................................42
Printing from the Computer.............................................................................43
Printing via AirPrint.................................................................................46
Preparing for AirPrint.......................................................................................46
Printing from an iPad, iPhone or iPod touch ...................................................46
Printing from a Computer................................................................................47
If Printing via AirPrint is Not Possible..............................................................47
Other Wi-Fi Functions.............................................................................44
Changing the Connection Method...................................................................44
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Printing from a Smartphone
Even in places without an access point, you can print directly from a
smartphone connected wirelessly to the printer.
Also, there is no need to install the dedicated application when printing from
3 Access the setting screen.
zzPress the <k> button.
zzPress the <u><d> buttons to select
[Wi-Fi Settings], and then press the
<o> button.
zzPress the <u><d> buttons to select
[Connection Settings], and then press the
<o> button.
1 Install the dedicated application
on your smartphone.
zzFor an iPhone, iPad, or iPod touch, visit
the App Store and download and install
Canon Easy-PhotoPrint.
zzFor an Android device, download and
install Canon Easy-PhotoPrint from
Google Play.
4 Check the printer name.
zzCheck the displayed printer name and
press the <o> button.
2 Prepare SELPHY.
zzRemove any inserted memory cards or
USB flash drives.
zzWhen you connect devices via Wi-Fi,
this name will be displayed on the target
device to identify the printer.
zzInsert a loaded paper cassette and an
zzYou can change the printer name by
Download from Www.Somanuals.com. All Manuals Search And Download.
31
5 Choose the connection method.
7 Use your smartphone to print.
zzPress the <u><d> buttons to select
[Direct Connection], and then press the
<o> button.
zzStart Canon Easy-PhotoPrint,
choose images, and print.
zzOnce printing begins, the screen at left is
displayed.
zzDo not disconnect the devices or close
the application while this screen is
displayed. Images may not be printed
correctly or completely.
zzThe standby screen at left is displayed
when printing is finished.
zzThe screen at left is displayed.
zzYou can change the password by
6 Use your smartphone to join the
network displayed on the printer
screen.
zzIn the smartphone’s Wi-Fi settings, select
the SSID (network name) displayed on
the printer.
• Printing in progress cannot be canceled from SELPHY by using the <v>
button. Use the smartphone to stop printing.
• You can also connect the printer to a smartphone via an existing access point.
In this case, connect the printer and smartphone to the same access point. For
• The printer does not enable communication between the devices connected
to it.
zzEnter the password displayed on the
printer into the password field.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Subsequent Printing
•
when you turn on the printer. To print, after the standby screen is
displayed, simply use the smartphone as described in steps 6 – 7 on
•
•
During standby-screen display, you can view the SSID and password by
pressing the <o> button. You can also change the password on the
Even during standby, you can print images on a memory card by
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Printing from a Camera
You can print as follows by connecting the printer to a camera compatible
3 Check the printer name.
zzCheck the displayed printer name and
press the <o> button.
with DPS over IP, the PictBridge standard for Wi-Fi connections.
zzWhen you connect devices via Wi-Fi,
this name will be displayed on the target
device to identify the printer.
1 Prepare SELPHY.
zzRemove any inserted memory cards or
USB flash drives.
zzYou can change the printer name by
zzInsert a loaded paper cassette and an
2 Access the setting screen.
4 Choose the connection method.
zzPress the <k> button.
zzPress the <u><d> buttons to select
[Direct Connection], and then press the
<o> button.
zzPress the <u><d> buttons to select
[Wi-Fi Settings], and then press the
<o> button.
zzPress the <u><d> buttons to select
[Connection Settings], and then press the
<o> button.
zzThe screen at left is displayed.
zzYou can change the password by
Download from Www.Somanuals.com. All Manuals Search And Download.
34
5 Use the camera to join the
network displayed on the printer
screen.
zzIn the camera’s Wi-Fi settings, select the
SSID (network name) displayed on the
printer.
• Printing in progress cannot be canceled from SELPHY by using the <v>
button. Use the camera to stop printing.
• You can also connect the printer to a camera via an existing access point. In
this case, connect the printer and camera to the same access point. For details
• The printer does not enable communication between the devices connected
to it.
zzEnter the password displayed on the
printer into the password field.
Subsequent Printing
6 Use the camera to print.
•
second, standby screen in step 6 is displayed automatically when you
turn on the printer. To print, after the standby screen is displayed, simply
use the camera as described in steps 5 – 6.
zzUse the camera to select images and
print.
zzOnce printing begins, the screen at left is
displayed.
•
•
During standby-screen display, you can view the SSID and password by
pressing the <o> button. You can also change the password on the
Even during standby, you can print images on a memory card by
zzDo not disconnect the devices while this
screen is displayed. Images may not be
printed correctly or completely.
zzThe standby screen at left is displayed
when the camera is no longer connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
•
Confirm that the access point supports WPS (Wi-Fi Protected Setup).
Printing from a Computer
WPS-Compatible Access
Points
Check the following information and connect as
Confirming Access Point Compatibility
•
•
Before you can print via Wi-Fi from a computer, the computer with the
images to send must be connected to an access point.
Non-WPS Access Points
- Network name (SSID/ESSID)
Or WPS Support Unknown - Network authentication / data encryption (encryption
method or mode)
- Password (network key)
Use an access point that supports the following Wi-Fi standards. To
check the standards your access point supports, refer to the access point
user manual.
* WPS connections are not possible for access points set up for WEP security. Connect
Standards
IEEE 802.11b/g
1 – 11
Supported
Channels
• If your network is managed by a system administrator, ask the
administrator for network setting details.
Transmission
Methods
DSSS (IEEE 802.11b) and OFDM (IEEE 802.11g)
No security, 64- and 128-bit WEP (open system authentication),
WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and
WPA2-PSK (AES)
Security
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Connecting the Printer to the Access Point
How to connect varies depending on whether the access point is WPS-
4 Check the printer name.
zzCheck the displayed printer name and
press the <o> button.
zzWhen you connect devices via Wi-Fi,
this name will be displayed on the target
device to identify the printer.
WPS-Compatible Access Points
1 Check the access point.
zzYou can change the printer name by
zzConfirm that the access point is on and
ready for communication.
2 Prepare SELPHY.
zzRemove any inserted memory cards or
USB flash drives.
5 Choose the connection method.
zzInsert a loaded paper cassette and an ink
zzPress the <u><d> buttons to select
[Via Wi-Fi Network], and then press the
<o> button.
3 Access the setting screen.
zzPress the <k> button.
zzPress the <u><d> buttons to select
[Wi-Fi Settings], and then press the
<o> button.
zzPress the <u><d> buttons to select
[Connection Settings], and then press the
<o> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
6 Choose the access point
8 On the access point, hold down
the WPS connection button for
a few seconds.
zzFor details on where the button is located
and how long to press it, check the
access point user manual.
connection method.
zzPress the <u><d> buttons to select
[WPS Connection], and then press the
<o> button.
9 Establish the connection.
zzOn the printer, press the <o> button.
zz[Connecting] is displayed on the printer,
followed by [Connected to access point]
when connected. Press the <o>
button.
7 Choose the WPS connection
zzThe screen at left is displayed, indicating
the name of the access point.
method.
zzPress the <u><d> buttons to select
[PBC Method], and then press the <o>
button.
zzThe screen at left is displayed.
• If you selected [PIN Method] in step 7, use the computer to specify the PIN
code (displayed on the printer) on the access point, press the <o> button on
the printer, and go to step 9. For instructions on configuring PIN codes, refer to
the access point user manual.
• On SELPHY, wireless signal strength is indicated by the following icons.
[
] High, [ ] Medium, [ ] Low, [ ] Weak, [
] Out-of-range
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Non-WPS Access Points
4 Check the printer name.
1 Check the access point.
zzCheck the displayed printer name and
press the <o> button.
zzConfirm that the access point is on and
ready for communication.
zzWhen you connect devices via Wi-Fi,
this name will be displayed on the target
device to identify the printer.
2 Prepare SELPHY.
zzRemove any inserted memory cards or
USB flash drives.
zzYou can change the printer name by
zzInsert a loaded paper cassette and an ink
3 Access the setting screen.
zzPress the <k> button.
5 Choose the connection method.
zzPress the <u><d> buttons to select
[Wi-Fi Settings], and then press the
<o> button.
zzPress the <u><d> buttons to select
[Connection Settings], and then press the
<o> button.
zzPress the <u><d> buttons to select
[Via Wi-Fi Network], and then press the
<o> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
6 Choose the access point
8 Enter the password.
connection method.
zzPress the EDIT button to access the input
screen, and then enter the password
zzPress the <u><d> buttons to select
[Search for an access point], and then
press the <o> button.
zzPress the <o> button.
zzAccess points found nearby are listed.
9 Check the access point.
7 Choose the access point.
zzOnce the printer is connected to the
access point, the screen at left is
zzPress the <u><d> buttons to select the
access point, and then press the <o>
button.
displayed. Check the indicated access
point name and press the <o> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Subsequent Connections
zzThe screen at left is displayed.
zzOnce you have connected to an access
point, the printer will automatically
reconnect to the previous access point
whenever you turn it on again, and the
standby screen at left will be displayed.
• Selecting an unprotected access point in step 7 and pressing the <o>
button will display the screen in step 9.
zzIf connection fails because the access point is off or for another reason,
• Up to 20 access points are listed. If your desired access point is not listed,
specify the access point manually. Follow on-screen instructions and enter the
• If WEP security is used and you enter the wrong password in step 8, when
you press the <o> button and then press the <o> button again after the
message, you will go to step 9, but printing is not possible. Check the access
point password and try to connect again, starting at step 3.
[
zzEven during standby, you can print images on a memory card by
zzAutomatic access point connection at startup can also be disabled
• On SELPHY, wireless signal strength is indicated by the following icons.
[
] High, [ ] Medium, [ ] Low, [ ] Weak, [
] Out-of-range
Download from Www.Somanuals.com. All Manuals Search And Download.
41
zzDepending on whether your computer is
32- or 64-bit (as shown in [System type]),
double-click the [32Bit] or [64Bit] folder.
[System type] can be accessed by right-
clicking [Computer] or [My Computer] and
choosing [Properties].
Preparing the Computer
Checking Your Computer Environment
SELPHY can connect via Wi-Fi to computers running the following
operating systems.
Windows
Macintosh
zzDouble-click [Setup.exe].
Windows 8
Windows 7 SP1
zzFollow the instructions displayed to
complete installation.
OS
Mac OS X 10.6.8 – 10.8
zzIf the User Account Control window
is displayed, follow the on-screen
instructions.
Free Disk Space Approx. 5 MB*
Approx. 7 MB*
* Space required for printer driver installation. The space required for software
operation and printing varies depending on the software and print data.
3 Choose the connection method.
Installing the Printer Driver (Windows)
zzWhen the screen at left is displayed,
select [Use with a wireless network] and
click [Next].
1 Confirm that SELPHY is
connected to the access point.
zzConfirm that the screen at left is
displayed on SELPHY.
4 To complete the installation
process, choose the printer to
connect to.
zzChoose the printer to connect to, and
then click [Next].
2 Begin the installation.
zzInsert the included CD-ROM in the
computer and double-click the disc icon
in [Computer] or [My Computer].
zzThe printer driver is installed.
zzDouble-click the [Driver] folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Installing the Printer Driver and Registering the Printer
(Macintosh)
Printing from the Computer
Use photo software to print as follows.
1 Confirm that SELPHY is
1 Confirm that SELPHY is
connected to the access point.
connected to the access point.
zzConfirm that the screen at left is
displayed on SELPHY.
zzConfirm that the screen at left is
displayed on SELPHY.
2 Install the printer driver.
2 Access the printing dialog box.
zzInsert the included CD-ROM in the
computer and double-click the disc icon
on the desktop or in the sidebar.
zzDouble-click the [Driver] folder.
zzDouble-click [ ].
zzStart the photo software, select images to
print, and access the printing dialog box.
zzAs the destination printer, select [Canon
(SELPHY) CP910 (WS)].
3 Choose printing options.
zzFollow the on-screen instructions to
install the printer driver.
zzChoose a paper size corresponding
to the size of paper and ink cassettes
in SELPHY. Also choose bordered or
borderless printing as an option with the
listed paper sizes.
3 Register the printer.
►
zzAccess [System Preferences]
Scan].
[Print &
zzClick [+] below the list.
zzChoose the printing orientation and
number of copies, as desired.
4 Print.
zzIf a pop-up menu is displayed, click [Add
Printer or Scanner] or [Add Other Printer
or Scanner].
zzSelect the printer named “Canon CP910”
(type: “cnybmscp”) and click [Add].
• Printing in progress cannot be canceled from SELPHY by using the
<v> button. Use the computer to stop printing.
• For computer or photo software instructions, refer to the relevant
user manual.
cnybmscp
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Changing the Printer Name
zzPress the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
zzPress the <u><d> buttons to select [Other Settings], and then press
the <o> button.
Other Wi-Fi Functions
Changing the Connection Method
You can change the connection method to suit how you use the printer.
zzPress the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
zzPress the <u><d> buttons to select [Set Printer Name], and then
press the <o> button.
zzPress the EDIT button to access the input screen, and then enter a new
zzPress the <u><d> buttons to select [Connection Method], and then
press the <o> button.
zzPress the <u><d> buttons to select a connection method, and then
press the <o> button.
Specifying the Communication Protocol
Select the IP version.
Disabling Wi-Fi
Disable Wi-Fi connections as follows.
zzPress the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
zzPress the <u><d> buttons to select [Wi-Fi], and then press the
<o> button.
zzPress the <u><d> buttons to select [Disable], and then press the
<o> button.
zzTo re-enable Wi-Fi connections, repeat these steps and select [Enable].
1 Select the IP version.
zzPress the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
zzPress the <u><d> buttons to select [Other Settings], and then press
the <o> button.
zzPress the <u><d> buttons to select [IPv4/IPv6 Settings], and then
press the <o> button.
zzPress the <u><d> buttons to select the version, and then press the
<o> button.
zzCheck the indicated information and press the <o> button.
zzWhen selecting [IPv4], go to step 2.
Checking Wi-Fi Settings Information
Check printer information (including the printer name and IP address) as
follows.
zzPress the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
zzIf you chose [IPv6], setup is now finished.
zzPress the <u><d> buttons to select [Confirm Settings], and then
press the <o> button.
zzPress the <u><d> buttons to check setting information.
zzPress the <v> button to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
2 Choose auto or manual IP address configuration.
Entering Information
When entering a printer name, password, or other information, press the
zzFor automatic IP address configuration, choose [Auto] and press the
<o> button. Setup is now finished.
EDIT button to access the input screen.
zzTo enter the IP address manually, choose [Manual] and press the
<o> button. Go to step 3.
Entering information
3 Enter the IP address.
zzPress the <u><d><l><r> buttons to
select a letter, number, or symbol, and
then press the <o> button. To enter
a space, select [Space] and press the
<o> button.
Deleting information
zzPress the <u><d><l><r> buttons to
zzPress the <l><r> buttons to move the cursor, press the <u><d>
buttons to specify the value, and then press the <o> button.
4 Enter the subnet mask.
zzPress the <l><r> buttons to move the cursor, press the <u><d>
buttons to specify the value, and then press the <o> button.
5 Check the settings.
zzReview the indicated setting details and press the <o> button.
select [
button.
], and then press the <o>
Returning the Wi-Fi Settings to Default
Reset Wi-Fi settings such as the printer name, access point information,
and password as follows.
zzPress the <k> button and then the <u><d> buttons to select [Wi-Fi
Settings], and then press the <o> button.
zzPress the <u><d> buttons to select [Reset Settings], and then press
the <o> button.
Switching input modes
zzTo switch from uppercase to lowercase
letters and then symbols, press the EDIT
button repeatedly.
Returning to the previous screen
zzTo confirm input and return to
the previous screen, press the
<u><d><l><r> buttons to select
[Finish], and then press the <o>
button.
zzConfirm your intent by pressing the <o> button.
zzTo cancel input and return to the previous
screen, press the <v> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Printing from an iPad, iPhone or iPod touch
Printing via AirPrint
Using AirPrint, you can print directly from an Apple device (such as an iPad,
iPhone, iPod touch, or Macintosh computer) without installing a printer
driver or dedicated application.
AirPrint requires one of the following devices.
• iPad (all models)*
• iPhone (3GS or later)*
1 Choose [Print].
zzIn the application on your Apple device, tap [ ], and in the menu
options displayed, tap [Print].
2 Configure printer options.
zzIn [Printer], choose [Canon CP910].
3zzSPpreincitf.y the number of copies.
• iPod touch (third generation or later)*
• Macintosh computer (running OS X 10.7 – 10.8)
* Make sure the latest version of iOS is installed.
zzTap [Print] to print.
Preparing for AirPrint
• [Printer Options] may not be displayed in step 2, depending on
AirPrint compatibility of the application. If printer options are not
available, printing is not possible from the application.
Without an Access Point
Even without an access point, you can print directly from an Apple device
connected wirelessly to the printer.
Connect the devices as described in steps 2 – 6 of “Printing from a
• To perform another operation while printing is in progress, press the Home
button twice. The [Print Center] icon will be displayed.
- To check the status:
Tap the [Print Center] icon.
With an Access Point
- To cancel printing:
Tap the [Print Center] icon, and then tap [Cancel Printing].
Connect the printer and Apple device to the same access point.
How to connect varies depending on whether the access point is WPS-
establish a connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Printing from a Computer
If Printing via AirPrint is Not Possible
If you cannot print, check the following.
Adding the Printer to the Printer List on the Computer
After connecting the printer and computer to the same access point, register
the printer on the computer as follows.
•
Confirm that the printer is on. If the printer is on, try restarting it to see if
the problem is resolved.
•
Confirm that the printer is connected via Wi-Fi to the same access point
as the Apple device.
►
zzAccess [System Preferences]
Scan].
[Print &
•
•
•
•
Confirm that the paper and ink cassettes are loaded correctly.
Remove any inserted memory cards, USB flash drives, or USB cables.
Confirm that no error messages are displayed on the printer.
zzClick [+] below the list.
zzIf a pop-up menu is displayed, click [Add
Printer or Scanner] or [Add Other Printer
or Scanner].
When printing from a computer, register the printer on the computer after
zzSelect the printer named “Canon CP910”
(type: “Bonjour”), select “AirPrint Printer”
in [Print Using], and then click [Add].
•
make sure the printer can print correctly. If printing is still not possible, see
Bonjour
Printing
1 Access the printing dialog box.
• It may take a few minutes after you turn on the printer before Wi-Fi
communication is possible. Confirm that the printer is connected to the access
zzStart the photo software, select images to print, and access the printing
dialog box.
2zzACshtoheosdeestpinraintiotninpgrinoteprt,isoenlesc.t [Canon CP910].
zzSpecify the paper size, orientation, and number of copies.
zzTo print at P size, select [Postcard].
zzTo print at C size, select [Custom] as the paper size, and in the size
settings, enter 54 mm as the width and 86 mm as the height.
3 Print.
zzClick [Print] to print.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Printing via USB Cable
This chapter describes how to connect a camera or computer via a USB cable for printing.
Printing from a Computer.......................................................................49
Printing from a Camera ..........................................................................52
Printing Using Camera Settings (DPOF Print) ................................................52
Preparing the Computer..................................................................................49
Printing from the Computer.............................................................................50
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Installing the Printer Driver (Windows)
1 Begin the installation.
Printing from a Computer
Here, instructions are given using Windows 7 and Mac OS X 10.7 as an
zzInsert the included CD-ROM in the
computer and double-click the disc icon
in [Computer] or [My Computer].
zzDouble-click the [Driver] folder.
zzDepending on whether your computer is
32- or 64-bit (as shown in [System type]),
double-click the [32Bit] or [64Bit] folder.
[System type] can be accessed by right-
clicking [Computer] or [My Computer] and
choosing [Properties].
example.
Preparing the Computer
What You Will Need
•
•
•
Computer
USB cable, 2.5 m (8.2 ft.) or shorter, sold separately (SELPHY port:
Mini-B)
System Requirements
zzDouble-click [Setup.exe].
zzFollow the instructions displayed to
complete installation.
Windows
Windows 8
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Macintosh
Mac OS X 10.6.8 – 10.8
Approx. 7 MB*
zzIf the User Account Control window
is displayed, follow the on-screen
instructions.
OS
Free Disk Space Approx. 5 MB*
2 Choose the connection method.
* Space required for printer driver installation. The space required for software
operation and printing varies depending on the software and print data.
zzWindows 7 or Windows 8: When the
screen at left is displayed, select [Use
with a USB connection] and click [Next].
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Printing from the Computer
3 When the screen at left is
displayed, prepare the printer
and connect it to the computer.
zzTurn off SELPHY and remove any
inserted memory cards or USB flash
drives.
1 Prepare SELPHY.
zzRemove any inserted memory cards or
USB flash drives.
zzInsert a loaded paper cassette and an ink
zzIf the printer and computer are not
connected yet, turn off the printer
momentarily, connect it to the computer
printer again.
zzInsert a loaded paper cassette and an ink
zzUse the USB cable to connect SELPHY
to the computer. For instructions, refer to
the computer or cable user manual.
2 Access the printing dialog box.
zzStart the photo software, select images to
print, and access the printing dialog box.
zzAs the destination printer, select [Canon
(SELPHY) CP910].
USB cable, sold separately
4 Turn on the printer to complete
3 Choose printing options.
the installation process.
zzChoose a paper size corresponding
to the size of paper and ink cassettes
in SELPHY. Also choose bordered or
borderless printing as an option with the
listed paper sizes.
zzPress the <q> button to turn on
SELPHY.
zzThe printer driver is installed.
Installing the Printer Driver (Macintosh)
zzChoose the printing orientation and
number of copies, as desired.
4 Print.
zzInsert the included CD-ROM in the
computer and double-click the disc icon
on the desktop or in the sidebar.
zzDouble-click the [Driver] folder.
zzDouble-click [ ].
zzFollow the instructions displayed to
complete installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
• Printing in progress cannot be canceled from SELPHY by using the
<v> button. To cancel printing, use the computer to delete the print
job.
• The printer may not work correctly if it is connected to a computer
via a USB hub.
• The printer may not work correctly if USB devices other than a
USB mouse or keyboard are used at the same time. In this case,
disconnect the other USB devices and reconnect the printer.
• Avoid allowing your computer to enter sleep or standby mode while
the printer is connected via USB. If the computer enters standby
mode with the printer connected via USB, wake the computer
without disconnecting the USB cable. If recovery fails, restart the
computer.
• For computer or photo software instructions, refer to the relevant
user manual.
• If an error message is displayed on SELPHY, also check for any error
messages displayed on the computer (in desktop mode). Messages will be
automatically dismissed once you resolve the issue indicated.
• If a message is displayed on the computer, you can also click [Cancel] to
cancel printing.
• Macintosh: If [Canon CP910] is not available as a destination printer, register
the printer on the computer as follows.
►
Access [System Preferences]
Click [+] below the list.
Choose [Canon CP910].
Click [Add].
[Print & Scan] (or [Print & Fax]).
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Printing from a Camera
By connecting a PictBridge-compatible camera, you can choose images
• Printing in progress cannot be canceled from SELPHY by using the <v>
button. Use the camera to stop printing.
• This product uses PictBridge technology to print via USB.
with the camera and print.
PictBridge technical standards facilitate direct connection of cameras, printers,
and other devices for easy printing. This product is compliant with the DPS
over IP standard that allows the use of PictBridge in network environments.
Here, printing instructions are given using a Canon compact digital camera
as an example. If your camera is operated differently, refer to the camera
user manual.
Printing Using Camera Settings (DPOF Print)
1 Prepare SELPHY.
Inserting a memory card with DPOF information configured on a camera
will display [DPOF images remain / Print images?]. To review the printing
information set on the camera, press the <o> button, and to print all
designated images at once, press the <p> button.
zzConfirm that no memory cards are
inserted in SELPHY.
2 Connect SELPHY to the camera
• For instructions on configuring DPOF information, refer to the camera user
manual.
• Dates and file numbers are DPOF information set on the camera that cannot
be changed on SELPHY.
• Images prepared with a [Print Type] of [Standard] on Canon cameras are
• You can also review the printing information set on the camera by pressing the
<k> button, selecting [DPOF Print], and pressing the <o> button.
However, [DPOF Print] is only displayed when a camera-configured memory
card is inserted.
3 Turn on SELPHY and then the
camera, and enter Playback
mode.
4zzSOonmtehceamcearmasewraill,dcishpolaoysae images
icon.
and prepare to print.
zzUse the camera to start printing.
zzAfter printing, turn off SELPHY and the
camera and disconnect the cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Troubleshooting
Refer to these troubleshooting tips to resolve problems with SELPHY. If the problem persists,
contact a Canon Customer Support Help Desk.
Power..............................................................................................................54
Screen.............................................................................................................54
Printing............................................................................................................54
Paper...............................................................................................................55
Wi-Fi................................................................................................................56
Error Messages...............................................................................................57
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Cannot display or print images on memory cards or USB flash drives
• Confirm that the memory card is fully inserted in the correct slot, with the label face-
• Confirm that a memory card requiring the use of an adapter has not been inserted
Power
Cannot turn on SELPHY
• When using Battery Pack NB-CP2L and Charger Adapter CG-CP200 (both sold
separately), confirm that the battery pack is charged and inserted correctly, and that
the cable is connected correctly.
Cannot print from a camera
• Confirm that your camera batteries have enough charge left. If the batteries are
depleted, replace them with fully charged or new ones.
Screen
[?] is displayed instead of images
• Display is not possible because the image has no thumbnail. You can check the
image before printing by pressing the <-> button for full-screen display.
Cannot print from a computer
• Remove any inserted memory cards or USB flash drives.
Printing
• When printing via Wi-Fi, confirm that both SELPHY and the computer are correctly
Cannot print
• When printing via USB, confirm that SELPHY is connected directly to the computer
• Windows: Confirm that the printer is not offline. If so, right-click the printer icon and
bring the printer online.
No date when printing from memory cards or USB flash drives
Note that in DPOF printing, date printing is configured on the camera.
• Confirm that you are using the correct combination of paper, paper cassette, and ink
• SELPHY will temporarily halt printing if it exceeds a specific temperature; this does
not indicate a problem. Wait until the printer cools off. During continuous printing, in
hot environments, or if the printer’s interior becomes hot because the rear-side air
take longer.
No date when printing from cameras
• Confirm that the date setting is enabled on the camera. Note that under standard
camera settings, the date setting on SELPHY will be used.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Print quality is poor
Paper
• Confirm that the ink sheet and paper are free of dirt or dust.
Paper does not fit in the cassette
• Confirm that SELPHY is away from sources of electromagnetic waves or strong
Paper feed problems or frequent paper jams occur
• Confirm that there are less than 19 sheets in the cassette.
Printed colors do not match on-screen colors
• Computer monitors employ a different method of color development from printers.
Colors may also look different depending on the intensity and color temperature of
lighting in the monitor viewing environment, as well as monitor color calibration.
• Confirm that 19 or more prints have not collected on the paper cassette.
Cannot print the correct quantity (unused paper left after ink runs out)
Individual images are printed reduced, in only one layout position
than [1-up] is selected, individual images are printed in one layout position per sheet
if you print from a camera or other device that can only send one image at a time.
Paper jams
out. If you cannot remove the paper by gently pulling it out, never force it out. Turn the
printer off and then on. Repeat until the paper is ejected. If you accidentally turn the
printer off while printing, restart it and wait until the paper is ejected. If paper jams and
cannot be removed, contact your retailer or a Canon Customer Support Help Desk.
Do not attempt to remove jammed paper by force, which may damage the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Cannot connect via Wi-Fi
• Try restarting SELPHY. If a connection still cannot be established, check the settings
Wi-Fi
of the access point or other device for the Wi-Fi connection.
Do not use the printer near sources of Wi-Fi signal interference, such as
microwave ovens, Bluetooth devices, or other equipment operating on the
2.4 GHz band.
• If connection via [WPS Connection] is not possible, try connecting by using [Search
Printer SSID (network name) not displayed when connecting to a
camera or smartphone
Can connect to access point, but cannot print
• Remove any inserted memory cards or USB flash drives.
• Keep the printer near the camera or smartphone, without objects between them.
• Printing is not possible when the printer is already printing a job from another device,
or when the printer is connected to a camera.
• Confirm that the camera, smartphone, or computer you are printing from is connected
to the same access point as SELPHY.
Access point not displayed on the printer
Cannot connect the printer to the access point
• Confirm that the access point is on and ready for communication. For instructions on
• If a message is displayed after you enter the correct password and press the <o>
point, and make sure connection settings on SELPHY such as the IP address are
how to check, refer to the access point user manual.
• If there are many access points but the required one is not listed, connect using WPS
• Keep the printer near the access point, without objects between them.
Printing takes too long, or the Wi-Fi connection is lost
• Confirm that the password is correct, and try connecting again.
• Do not use the printer near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
• Confirm that the access point channel is between 1 – 11. Instead of auto channel
assignment, it is advisable to specify a channel in this range manually. For
instructions on checking or adjusting the settings, refer to the access point user
manual.
Note that even when [
] is displayed, image transmission may take some time.
smartphone, without objects in between.
• If the access point filters communication by MAC or IP addresses, on the access
Also try disabling any access point isolation or privacy separation functions.
For instructions on checking or adjusting the settings, refer to the access point user
manual.
without objects in between.
Cannot connect via Wi-Fi from the computer
• Check the OS version to confirm that you are using Windows 8, Windows 7 SP1, or
Mac OS X 10.6.8 – 10.8.
• Install a driver.
• In Windows, enable [Network Discovery].
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Message displayed when connecting a camera or smartphone
• Using [Direct Connection], you can connect up to 10 devices at a time. Attempting
to connect more than 10 devices will display a message. In this case, use one of
the connected devices to disconnect from the printer, press the <o> button on
the printer to clear the message, and then use the device for the new connection
to connect to the printer. If disconnection is not possible using a connected device,
turn off the printer momentarily to disconnect all devices, and then turn the printer on
again.
Error Messages
Error messages indicate problems with SELPHY. When error messages
include troubleshooting tips, follow the instructions. If only an error message
If the problem persists, contact a Canon Customer Support Help Desk.
• If a problem occurs while SELPHY is connected to a camera, an error
message may also be displayed on the camera. Check both SELPHY and the
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Appendix
Instructions for battery-powered printing with an optional battery pack are given here, along with
printer specifications and handling and maintenance tips.
Printing without a Power Outlet.............................................................59
Handling and Maintenance.....................................................................62
Attaching the Battery Pack..............................................................................59
Charging the Battery Pack ..............................................................................59
Battery-Powered Printing ................................................................................59
Wi-Fi (Wireless LAN) Precautions .........................................................62
Radio Wave Interference Precautions ............................................................63
Security Precautions .......................................................................................63
While Printing..................................................................................................64
Specifications..........................................................................................60
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Charging the Battery Pack
Connect the power cord to the
Printing without a Power Outlet
To print where no power outlet is available, use Battery Pack NB-CP2L and
Charger Adapter CG-CP200 (both sold separately). On a full charge, up to
about 36 sheets* of postcard-size paper can be printed.
* According to Canon testing. May vary depending on printing conditions.
charger adapter with the battery
pack inserted.
zzBattery charging begins, and the orange
lamp is lit.
Attaching the Battery Pack
zzWhen charging is finished in about four
hours, the green lamp will be lit.
zzCharging continues if you turn on
SELPHY with the charger adapter
connected but will stop while printing.
1 Remove the battery terminal
cover.
Battery-Powered Printing
2 Attach the battery pack to the
charger adapter.
Connect the charger adapter to
SELPHY.
zzSlide the terminal-end in the direction of
the arrow ( ) and insert the other end
(
) until it clicks into place.
• For battery precautions, refer to the battery user manual.
• Keep the charger adapter on a desk or other stable surface while it is
connected to SELPHY, and be careful not to unplug the cable by mistake.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Interfaces
Hi-Speed USB
Specifications
Type A port for PictBridge-compatible devices
Mini-B port for computers
SD, SDHC, SDXC, miniSD*2, miniSDHC*2, microSD*2,
microSDHC*2 and microSDXC*2
Printing Method
Dye-sublimation thermal transfer (with overcoating)
Memory Cards
Resolution
Gradation
Ink
300 x 300 dpi
256 shades per color
Wireless LAN
Standards:
Channels:
Connection:
Transmission:
IEEE 802.11b/g
1 – 11
Infrastructure mode*3
DSSS (IEEE 802.11b) or OFDM (IEEE
802.11g)
Dedicated color ink (Y/M/C/overcoating)
Paper
Postcard and card size (including full-page label and 8
labels per sheet configuration)
Print Size
Borderless
Bordered
Security:
No security, 64- and 128-bit WEP (open
system authentication), WPA-PSK
(TKIP), WPA-PSK (AES), WPA2-PSK
(TKIP), and WPA2-PSK (AES)
Postcard
100.0 x 148.0 mm
(3.94 x 5.83 in.)
54.0 x 86.0 mm
(2.13 x 3.39 in.)
22.0 x 17.3 mm
(0.87 x 0.68 in.)
50.0 x 50.0 mm
(1.97 x 1.97 in.)
91.3 x 121.7 mm
(3.59 x 4.79 in.)
49.9 x 66.6 mm
(1.96 x 2.62 in.)
–
Card
USB Flash Drives
FAT or exFAT format only
5 – 40 °C (41 – 104 °F)
Label on 8-label
sheet
Square labels
Operating
Temperature
–
Operating Humidity
20 – 80%
Power
Compact Power Adapter CA-CP200 B
Battery Pack NB-CP2L (sold separately)
Charger Adapter CG-CP200 (sold separately)
Printing Speed*1
From memory cards, USB flash drives, or cameras
(PictBridge) (Time in parentheses applies to patterns 1
or 2 in [Print Finish])
Power Consumption
Dimensions
60 W or less (standby: 4 W or less)
Postcard
Card
Approx. 47 sec.
Approx. 27 sec.
(Approx. 58 sec.)
(Approx. 32 sec.)
178.0 x 127.0 x 60.5 mm (7.01 x 5.00 x 2.38 in.) excluding
protrusions
Feeding System
Ejection System
Screen
Auto feeding from paper cassette
Weight (printer body
only)
Approx. 810 g (28.6 oz.)
Auto ejection onto paper cassette
Tilting 6.75 cm (2.66 in.) TFT LCD color monitor
*1 From the initial yellow printing pass until ejection.
*2 Requires an optional dedicated adapter.
*3 Supports Wi-Fi Protected Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
60
CAUTION
Compact Power Adapter CA-CP200 B
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Rated Input
100 – 240 V AC (50/60 Hz), 1.5 A (100 V) – 0.75 A (240 V)
24 V DC, 1.8 A
Rated Output
Use of genuine Canon accessories is recommended.
Operating Temperature 0 – 45 °C (32 – 113 °F)
This product is designed to achieve excellent performance when used with
genuine Canon accessories.
Dimensions
122.0 x 60.0 x 30.5 mm (4.80 x 2.36 x 1.20 in.) excluding
power cord
Canon shall not be liable for any damage to this product and/or accidents
such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please
note that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
Weight
Approx. 310 g (10.9 oz.)
Charger Adapter CG-CP200 (Sold Separately)
Rated Input
24 V DC
24 V DC
Rated Output
Operating Temperature 5 – 40 °C (41 – 104 °F)
Dimensions
Weight
156.2 x 49.0 x 35.5 mm (6.15 x 1.93 x 1.40 in.)
Approx. 134 g (4.7 oz.)
Battery Pack NB-CP2L (Sold Separately)
Type
Rechargeable lithium-ion battery
22.2 V DC
Nominal Voltage
Nominal Capacity
Charging Cycles
1200 mAh
Approx. 300 times
Operating Temperature 5 – 40 °C (41 – 104 °F)
Dimensions
Weight
110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)
Approx. 230 g (8.1 oz.)
•
•
All data is based on tests by Canon.
Printer specifications or appearance are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Handling and Maintenance
Wi-Fi (Wireless LAN) Precautions
•
•
Do not subject the printer to excessive force, which may damage the
printer or cause paper jams.
•
•
This product is embedded with a wireless device. The model number is
CD1112 (including WLAN module model WM318).
Do not expose the printer to insecticides or other volatile substances.
Additionally, do not store the printer in contact with rubber, vinyl, or plastic
products over extended periods, which may deteriorate the casing.
Countries and Regions Permitting WLAN Use
- Use of WLAN is restricted in some countries and regions, and illegal
use may be punishable under national or local regulations. To avoid
violating WLAN regulations, visit the Canon website to check where use
is allowed.
Note that Canon cannot be held liable for any problems arising from
WLAN use in other countries and regions.
•
Avoid condensation on the printer, which may happen when moving
the printer from cold to warm environments. Put the printer in a sealed
plastic bag and allow it to adjust to the new temperature before removing
the bag. If condensation forms, allow the printer to dry naturally at room
temperature before using again.
•
•
Doing any of the following may incur legal penalties:
- Disassembling or modifying the product
- Removing the certification labels from the product
•
•
When the printer becomes dirty, wipe it with a soft, dry cloth.
and affecting print quality.
According to foreign exchange and foreign trade law regulations, export
permission (or service transaction permission) from the Japanese
government is necessary to export strategic resources or services
(including this product) outside Japan.
• Never wipe the printer with solvents, such as benzene or thinner, or
neutral detergent, which may cause deformation or peeling of the
casing.
•
•
Because this product includes American encryption software, it falls
under U.S. Export Administration Regulations, and cannot be exported to
or brought into a country under U.S. trade embargo.
Be sure to make notes of the wireless LAN settings you use.
The wireless LAN settings saved to this product may change or be
erased due to incorrect operation of the product, the effects of radio
waves or static electricity, or accident or malfunction. Be sure to make
notes of wireless LAN settings as a precaution. Please note that Canon
accepts no responsibility for direct or indirect damages or loss of
earnings resulting from a degradation or disappearance of content.
•
When transferring this product to another person, disposing of it, or
sending it for repair, be sure to note the wireless LAN settings and reset
the product to its default settings (erase settings) if necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
•
•
•
Canon will not make compensation for damages resulting from loss or
theft of the product.
Canon accepts no responsibility for damages or loss resulting from
unauthorized access or use of target devices registered on this product
due to loss or theft of the product.
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
•
Use only networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays the
results on the screen.
Networks you are not authorized to use (unknown networks) may also
be displayed. However, attempting to connect to or using such networks
could be regarded as unauthorized access. Be sure to use only networks
you are authorized to use, and do not attempt to connect to other
unknown networks.
Be sure to use the product as directed in this guide.
Be sure to use the wireless LAN function of this product within the
guidelines noted in this guide. Canon accepts no responsibility for
damages or loss if the function and product are used in ways other than
as described in this guide.
Do not use the wireless LAN function of this product near medical
equipment or other electronic equipment.
Use of the wireless LAN function near medical equipment or other
electronic equipment may affect operation of those devices.
If security settings have not been properly set, the following problems may
occur.
Radio Wave Interference Precautions
•
Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and
attempt to acquire the data you are sending.
This product may receive interference from other devices that emit radio
waves.
To avoid interference, be sure to use this product as far away as possible
from such devices, or avoid using the devices at the same time as this
product.
•
Unauthorized network access
Third parties with malicious intent may gain unauthorized access to the
network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access
such as impersonation (where someone assumes an identity to gain
access to unauthorized information) or springboard attacks (where
someone gains unauthorized access to your network as a springboard to
cover their tracks when infiltrating other systems).
This product is installed with the WLAN Module which is certified to
standards set by IDA Singapore.
To prevent these types of problems from occurring, be sure to thoroughly
secure your Wi-Fi network.
Only use this product’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security
settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
WPA Supplicant License
WPA Supplicant
Copyright (c) 2003-2012, Jouni Malinen <[email protected]> and contributors All Rights
Reserved.
While Printing
Do not disconnect the printer from other devices until printing is finished,
which may cause incomplete or incorrect prints.
This program is licensed under the BSD license (the one with advertisement clause
removed).
This product can print using PictBridge over wireless LANs.
PictBridge technical standards facilitate direct connection of cameras,
printers, and other devices for easy printing. Support for the PictBridge
DPS over IP standard enables the product to print wirelessly in network
environments.
If you are submitting changes to the project, please see CONTRIBUTIONS file for more
instructions.
License
This software may be distributed, used, and modified under the terms of BSD license:
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its
contributors may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR ONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Trademarks and Licenses
•
•
Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
•
•
•
App Store, iPhone, and iPad are trademarks of Apple Inc.
The SDXC logo is a trademark of SD-3C, LLC.
Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™
are trademarks or registered trademarks of the Wi-Fi Alliance.
•
•
•
All other trademarks are the property of their respective owners.
This device incorporates exFAT technology licensed from Microsoft.
Portions of the code used in this firmware are based in part on the work
of the Independent JPEG Group.
Disclaimer
•
•
•
•
Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
Canon reserves the right to change the contents of this guide at any time
without prior notice.
Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
The above items notwithstanding, Canon accepts no liability for damages
due to mistaken operation of the products.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
|