CI240 Integrated Washing Machine
Manual for Installation, Use and Maintenance
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
Download from Www.Somanuals.com. All Manuals Search And Download.
Important
This appliance must only be used for the purpose for which it is intended, i.e. domestic use. Any other use could be
dangerous and may lead to premature failure of the appliance.
The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this
product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect
installation or misuse of the appliance.
Under no circumstances should any external covers be removed for servicing or maintenance except by suitably
qualified personnel.
Appliance information:
Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a
fault with your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
CE Declarations of Conformity:
This appliance has been designed, constructed and marketed in compliance with safety requirements of EEC Directive
2006/95/EEC (Low voltage) and requirements of EMC Directive 2004/108/EEC.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local
authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health
deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings
in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked
with a crossed-out wheeled dustbin.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
To avoid the risk of fire, electric shocks, injury or damage when using your washing machine, please take the
following precautions:
•
•
Please read all the instructions before using the washing machine.
Do not wash items that have previously been cleaned, washed, soaked or treated with petrol, solvents for dry
cleaning, other inflammable substances or explosives, as they produce fumes that could catch fire or explode.
•
•
Do not add petrol, solvents for dry cleaning or other inflammable or explosive substances to the wash water as they
produce fumes that could catch fire or explode.
Do not repair or replace any part of the washing machine or try to carry out any type of servicing unless it is
recommended in the maintenance instructions in the manual.
•
•
•
Do not climb onto the machine or stand on the open porthole door.
Do not use an extension lead or adaptor to connect your washing machine to the mains supply.
Follow the washing instructions recommended by the manufacturer of the
garment to be washed.
•
Do not turn your washing machine on until you are sure that:
It has been installed in accordance with the installation instructions.
All the water, drainage, mains electricity and earth connections meet the local regulations and/or other
applicable regulations.
Important: Ensure that the transit bolts have been removed prior to using the machine.
Washing Machine Specifications
Porthole door
Accessories
Rear plugs
Drain pipe bender
Water inlet hose
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking the Washing Machine
•
Remove the base, corner protectors and top cover (Figure 1).
Removing the Transit Bolts
•
Remove the screws holding the plastic covers to the back of the
washing machine (Figure 2 and 3).
•
•
Loosen and remove the 3 transit bolts (Figure 3).
Cover the holes with the plastic plugs supplied.
fig. 1
Do not throw the transit bolts away. If you need to move the washing
machine after installation you should first replace the transit bolts.
fig. 2
fig. 3
fig. 4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the Mains Water Supply
The water supply hose is located inside the drum.
•
•
Connect the bent end of the hose to the threaded inlet of the
electrovalve located at the rear of the washing machine.
Connect the other end of the hose to the water intake. Then securely
tighten the connecting nut.
fig. 5
The drain hose must be securely fastened to the outlet to prevent
any risk of the drain hose becoming detached and causing flooding.
The washing machine must be connected to the mains water supply,
using the new supply hoses supplied with the appliance. Do not use
water supply hoses that have been used previously.
fig. 6
For your washing machine to work properly, the mains water
pressure must be between 0.05 and 1MPa (0.1 - 10 bar).
Drainage Connection
•
It is recommended that you have a fixed drainage outlet 50 to 70 cm
from the floor.
•
•
Avoid the drain hose being too tight, kinked or restricted.
The water outlet can either be connected to a water drain or to a sink
outlet spigot. This connect should be a minimum of 50cm and a
maximum of 110cm from the floor. The drain hose should be no longer
than 4m in length to ensure good performance from the dishwasher.
•
After connecting the water supply, check to ensure there are no leaks.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Levelling
•
To reduce the noise level from the washing machine and to prevent
unnecessary movement during use, you should ensure the washing machine
is level using the adjustable feet.
•
First, fix and level the rear feet. When they are properly fixed, secure the
metal locknut tightly against the underside of the washing machine.
fig. 7
•
•
Put the washing machine into its required position.
Then level the front feet in the same way as the front feet.
Please note: Raising the washing machine too high can affect the
stability of the appliance.
Electrical Connection
•
Check the rating plate located on the porthole door of the washing
machine before connecting the appliance to the power supply. Ensure
that the voltage reaching the plug is the same as that on the plate.
fig. 8
Do not remove the rating plate. The information on it is important.
Do not plug the washing machine plug into the socket with wet or
damp hands.
To remove the power cord, pull on the body of the plug, not
the cable.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical information
Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug,
follow the steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover.
3. Replace fuse cover.
Important: Do not use the appliance without the fuse cover in position.
How to connect an alternative plug
If the fitted plug is not suitable for your socket outlet, then it should be cut off and disposed of safely to avoid the risk of
electric shock. A suitable alternative plug of at least 13 Amp rating to BS 1363 should be used.
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:-
•
•
•
The wire which is coloured GREEN and YELLOW must be connected to the terminal which is marked with letter (E) or
by the Earth symbol or coloured GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter (N), or
coloured BLACK or BLUE.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter (L) or
coloured RED or BROWN.
If in doubt regarding the electrical connection of this appliance, consult a qualified electrician. Do not shorten the
supply cable, the appliance may require removing for servicing.
N.B. Ensure that the plug socket is situated in an easily accessible place.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before First Use
•
When your washing machine has been correctly installed, we recommend
that you pre-clean the machine.
This is to check that the installation, the connections and the drainage are all
correct, and to thoroughly clean the inside of the washing machine before
any wash programmes are run (see the operating instructions on the
following pages).
fig. 9
•
Prior to pre-cleaning you should ensure the transit bolts have
been removed.
•
•
Select the normal programme at 60ºC (Figure 9).
Press the Start/Pause button (Figure 9).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing Garments for Washing
Preparation
•
Before placing the clothes in the drum, make sure all the pockets are
empty (Figure 10). Any small objects may block the drain pump.
Sorting the Clothes
fig. 10
fig. 11
fig. 12
fig. 13
Sort the clothes according to fabric and how they are made:
•
We recommend using the delicate programmes for sensitive fabrics
(Figure 11).
•
Sort clothes according to how soiled they are (Figure 12).
Wash lightly soiled garments using a short programme.
Use a programme without prewash for medium-soiled garments.
Wash heavily soiled garments using a long programme with
prewash.
Sort your clothes according to colour (Figure 13).
Wash white and coloured loads separately.
We recommend loading the washing machine to its full capacity for
best water and energy efficiency.
Whenever possible, we recommend that you wash garments of
different sizes within the same wash programme. This improves
the washing action and also aids the correct distribution of the
garments in the drum when spin-drying, and the washing machine
will therefore be quieter.
We recommend that small garments are placed in a wash bag.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergents and Additives
Your washing machine’s detergent dispenser has three compartments.
a
WASH FABRIC SOFTENER PREWASH
•
Add the detergent or additive to the detergent dispenser before starting
the wash programme (Figure 14).
The detergent dispenser is designed to allow the use of liquid detergents
rather than adding them to the drum. You should ensure that you close the
wash compartment flap before adding the liquid detergent.
fig. 14
•
To do so, hold the blue tab at the back of the dispenser and pull it forwards
until it is fully extended.
b
•
Then release the flap so that it drops down at the back of the dispenser.
This will stop the liquid detergent from escaping from the compartment
before it is needed.
•
To use powder detergents again, then lift the blue tab back up and relocate
it by pushing it back into the dispenser housing.
fig. 15
The level of liquid must never be higher than the MAX mark printed
on the dispenser wall.
Remember that the amount of detergent to be used will always depend on:
•
•
•
The amount of clothes to be washed.
How heavily the clothes are soiled.
The hardness of the water (Information on water hardness in your area can
be obtained from your local water board).
fig. 16
We recommend the use of a decalcifying product if the water
hardness is high in your area.
Eco Note
The use of more detergent than necessary will not improve your washing
results, and will have a negative effect on the preservation of the environment.
We therefore recommend you follow the detergent manufacturer’s
instructions.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Wash Programme
Start/Pause
button
Time delay button
Programme selector
Spin/Anti-crease Additional
button function button
fig. 17
To select a wash programme:
•
•
•
Turn the programme selector dial clockwise to the desired function.
The display on the control panel will light up.
Press the Start/Pause button to begin the programme.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Selecting the Wash Programme
When you select the programme, the following information will be displayed:
1. Wash programme phases:
Prewash
Wash
Rinse
Spin-drying and draining
2
3
fig. 18
2. Spin speed
1
3. Programme number (for a few seconds) and then programme duration.
4. Additional functions:
Easy iron
Extra rinse
Intensive wash
2
3
4
fig. 19
There are four types of programme:
Normal programmes
Delicate programmes
Wool programme
Auxiliary programmes
Normal
Delicate
Wool
Auxiliary
1 Normal cold
2 Quick 30ºC
8
9
Delicate cold 12 Wool cold 14 Rinses
Delicate 30ºC 13 Wool 35ºC 15 Spin-drying
3 Normal 30ºC
4 Normal 40ºC
5 Normal 60ºC
6 Normal 90ºC
7 Prewash 60ºC
10 Delicate 40ºC
11 Delicate 60ºC
16 Drain/End
Eco Note
We recommend you choose a wash programme without prewash whenever
possible. This will save you money and help protect the environment.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Machine Programmes
Possible option buttons
Max.
load of
clothes (Kg)
Recommended
temperature
Fabric type
Programme
Normal cold
Quick 30ºC
Normal 30ºc
Normal 40ºC
Cotton/Linen
delicate colours
very light soil
1
2
3
4
Cold
YES
Cotton/Linen
whites/colours
very light soil
YES NO
YES
30
30
40
60
90
Cotton/Linen
delicate colours
light soil
YES
YES
YES
YES
Cotton/Linen
fast colours
light soil
Cotton/Linen
fast colours
medium soil
5 (*) Normal 60ºC
Cotton/Linen
whites
6
7
8
9
Normal 90ºC
Prewash 60ºC
Delicate cold
Delicate 30ºC
heavy soil
Cotton/Linen
whites/fast colours
heavy soil
YES
YES
60
Synthetic/mix
Cold
cotton delicate colours
very light soil
Synthetic/mix cotton
delicate colours
light soil
YES
YES
YES
30
40
30
40
Synthetic/mix cotton
delicate colours
medium soil
10 Delicate 40ºC
11 Delicate 60ºC
12 Wool cold
13 Wool 35ºC
14 Rinses
Synthetic/mix cotton
white/fast colours
medium soil
60
Wool/wool mix
white/colour
very light soil
YES NO
YES
WOOL Cold
Wool/wool mix
white/colour
light soil
WOOL 35
YES NO
YES NO
YES
YES
Cotton/cotton mix
Synthetic/Delicate
Wool/wool mix
_
_
_
Cotton/cotton mix
Synthetic/Delicate
Wool/wool mix
15 Spin-drying
16 Drain /End
NO
YES
NO
Cotton/cotton mix
Synthetic/Delicate
Wool/wool mix
NO
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Machine Programmes
TURBO TIME PLUS
Wash
product
compartment
Max.
load of
clothes (Kg)
Programme
description
Total
Approx.
duration
(minutes)
consumption
KWh/litres
Normal wash, rinses,
0,10/59
0,25/30
0,30/59
0,60/59
1,52/59
2,20/64
1,50/64
0,10/45
0,20/45
0,40/45
1,00/45
0,05/55
0,45/55
0,05/25
0,05/0
50
30
52
57
80
110
100
50
50
55
70
30
40
23
10
2
automatic additive absorption
if desired and long final spin
8
2
SHORT wash, rinses,
automatic additive absorption
if desired and final long spin
8
Normal wash, rinses,
automatic additive
absorption if desired
and long final spin
8
8
8
Prewash, normal wash, rinses,
automatic additive absorption
if desired and long final spin
8
3,5
3,5
3,5
3,5
2
Delicate wash, rinses,
automatic additive
absorption if desired
and gentle final spin
WOOL wash, rinses,
automatic additive
absorption if desired
and gentle final spin
2
Rinses, automatic
8
additive absorption if
desired and long final spin
8
_
_
Drain and final long spin
Drain and end of programme.
Takes programme to
final position
8
0,00/0
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Spin Speed Selection and Anti-Crease
You should first select the wash programme and then select the wash options
(Changing the programme cancels the preset selected options).
Each selected programme has its own preset spin speed.
SPIN
Spin speed
•
You can reduce the spin speed or remove it completely by pressing the spin
button (Figure 20).
fig. 20
fig. 21
fig. 22
fig. 23
•
The spin speed will gradually reduce each time the spin button is pressed at
100 r.p.m. intervals to a minimum of 400 r.p.m (Figure 21).
No spin
•
Press the spin button again to get to the no spin option and the display will
show “0” (Figure 22).
SPIN
•
A programme without a final spin is used to prevent creasing when
washing special fabrics.
Anti-crease option
•
Pressing the spin button again will select the anti-crease option (Figure 23).
The wash programme stops on the last rinse, with the clothes left in water.
•
•
When the option is deactivated, the washing machine continues the
programme, draining and spin-drying.
SPIN
•
It is used, for example, when you are not at home and want to delay the
spin drying until you get home, to prevent the clothes creasing after spin-
drying and being left in the drum to be removed.
SPIN
For added safety, the porthole door does not open immediately at
the end of programme. There is a time delay of approximately two
minutes before you can open the door.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Delay
Time delay selection button
•
•
A delay of up to 24 hours can be selected. The delay must be selected after
choosing the wash programme.
To select the hours of delay, press the time delay button (Figure 24). Each
time the button is pressed the delayed start of washing is increased by
one hour.
fig. 24
Cancelling the delay
•
To cancel the delay, press the time delay button repeatedly to cycle
through the full 24-hours, and then press again.
•
The delay will be cancelled when 24 hours have been reached and the
button is pressed once more. If the programme is changed the delay is
also cancelled.
Additional functions
Additional function selection button depending on programmes.
•
•
•
There are 3 options: easy iron, extra rinse and intensive wash.
Press the button and the desired option will be displayed (Figure 25).
By pressing the button several times you can choose between several
combinations of one, two and up to three additional functions at the
same time depending on the programme selected (Figure 26).
fig. 25
Option 1: Easy-iron
This option prevents garments from creasing by means of carrying out a
special programme with special turns to fluff out the garments after
spin-drying and make them easier to iron.
Option 2: Extra rinse
fig. 26
Increases the level of the final rinse obtained in the clothes; suitable for large
loads and garments belonging to people with sensitive skin. However, this
option will increase your water consumption.
Option 3: Intensive wash
This option, specially recommended for heavily soiled or stained clothes,
achieves better results by extending the normal wash cycle.
If during the additional function selection, the programme is
changed or the Start/Stop button is pressed, all the functions
selected until then are cancelled.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting Up
Start/Pause button
•
•
To start up the washing machine you have to press the Start/Pause button
(Figure 27).
The time remaining (in minutes) until the end of the programme will
appear on the display at all times.
fig. 27
fig. 28
fig. 29
Lock Function
Lock function selection
•
•
The lock function ensures that the programme will not be affected if any
buttons are pressed. It is used when children could press the buttons, etc.
The lock function should be activated after the wash programme has been
selected together with all its options.
Activating the lock function
•
The lock function is activated by pressing the Start/Pause button and
holding it down for at least 3 seconds (Figure 28).
•
The display will show the lock symbol if it is activated.
Deactivating the lock function
•
The lock function is cancelled when the wash programme comes to
an end (Figure 29).
•
If you want to deactivate the lock function before the end of the
programme, you have to hold the Start/Pause button down again for at
least 3 seconds.
•
•
After 3 seconds, the lock function indicator will disappear from the display,
and it will go into pause status.
The Start/Pause button does not cancel the lock function.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Programme Phases and Power Cuts
Programme Phases
•
•
When the programme is running, the programme phase and the time
remaining will appear on the display (Figure 30).
The active phases will appear successively at the top of the display as the
programme progresses (Figure 30). The time remaining until the end of
the programme will also appear on the display. It updates at regular
intervals, but not minute by minute.
fig. 30
•
Any option button can be selected provided the wash phase in which it
takes effect has not been passed and when the programme accepts
the option.
•
•
Pressing the time delay button during washing will have no effect on the
wash programme.
Pressing the Start/Pause button during the wash activates the
PAUSE function.
If the programme is changed on the selector dial during the washing
and drying process, the washer will go onto PAUSE status and the
programme will be cancelled.
If you need to add or remove a garment, press the Start/Stop button
and make sure that the water level is not above the door overflow
level and that the temperature inside is not high. Press the Start/Stop
button again to restart the wash from the same cycle phase it had
stopped at.
Power Cuts
•
If there is a power cut, when the electricity comes back on the washing
machine will continue to run from where it left off (it has several hours of
memory).
Warnings and Advice
•
Try to wash clothes of different sizes in the same wash programme to
favour the distribution of the clothes inside the drum during spin-drying.
•
All the models have a safety system for spin-drying that prevents spin
drying from being carried out if the distribution of the clothes inside
the drum is too concentrated. This prevents the appliance from vibrating
too much.
•
If you find that the clothes are not properly wrung out, try spin-drying
them again after having distributed the clothes more evenly in the drum.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
•
After each wash, leave the door open for a while to allow the air to circulate
freely inside the machine.
•
From time to time, depending on the hardness of your water, it is
recommendable to run a full wash cycle using a decalcifying product. This
will extend the life of your washing machine.
Cleaning the Detergent Dispenser
•
Clean the detergent dispenser whenever there is any washing product
residue left inside.
•
Pull outwards on the detergent dispenser to remove it completely
(Figure 32).
fig. 31
•
•
Use warm water and a brush to clean the compartments (Figure 33).
Also clean the additive compartment siphons, having removed them first.
Once they have been cleaned, put them back making sure that they fit right
in to the back (Figure 33).
•
Put the dispenser back into the washing machine.
The washing machine should be disconnected from the mains
fig. 32
electricity supply before any cleaning or maintenance is carried out.
A dirty or incorrectly fitted siphon will prevent the detergents from
being taken in and leave water inside the compartment at the end of
the wash.
fig. 33
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Filter
•
•
•
•
Clean the accessible filter if the drain pump is blocked by any
foreign objects.
Open the kickplate cover with the aid of a coin and by gently pulling
open (Figure 34).
Place a container under the drain pump filter to collect any water that
comes out of it (Figure 35).
fig. 34
fig. 35
fig. 36
fig. 37
Remove the drainpipe, place it on the container and open the cover. Water
will start to come out.
b
•
•
•
Half- or quarter-turn the filter to the left (Figure 36).
Water will start to come out.
When all the water has drained out of the washing machine, turn the filter
several times until it can be completely removed by gently pulling on it
(Figure 36).
c
•
•
Remove the objects or fluff caught in the filter or the drain pump
(Figure 37).
Put the filter and the filter cap back in place.
To avoid risk of scalding, do not carry out this operation when the
wash water is at a temperature of over 30ºC.
Cleaning the Outside of the Washing Machine
•
d
The outside of the washing machine should be cleaned with warm soapy
water or a gentle cleaning agent. Do not use abrasive cleaning products
or solvents.
•
It should then be thoroughly dried with a soft cloth.
Wipe any detergent spills immediately to minimise the risk of
damage to the cabinet of your washing machine.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety and Troubleshooting
•
If you detect any problems with your washing machine, you will probably be able to rectify them yourself by
consulting the following instructions.
•
If this is not the case, unplug the appliance and contact the technical assistance number.
Do not open up the washing machine. It does not contain any fuses or similar components than can
be replaced.
Indicator
F01
Problems
No water coming in
F02
Does not drain or spin-dry
Does not spin-dry
C03
F04
Does not start
F05 - F10
Call the Technical Assistance Team
Problems
Why won’t the washing machine start?
This may be due to the following:
•
•
•
•
Check the door is properly shut.
The washing machine is not plugged into the mains or there is no voltage in the mains supply.
The Start/Pause button has not been pressed.
If the washing machine door is not properly shut, F04 will appear on the display.
Why is the washing machine vibrating or making too much noise?
This may be due to the following:
•
•
•
The blocking and transport screws have not been removed.
The washing machine has not been correctly levelled.
On spin-drying, the motor makes a kind of whistling noise. This is due to the mechanical action of the motor
itself and is perfectly normal.
Why doesn’t the washing machine take in water?
•
If F01 shows on the display this may be caused by a cut in the water supply, a tap turned off or a blocked
water inlet filter.
•
The possible solutions are as follows: wait for the water supply to be reconnected, turn on the tap, or remove the
water inlet hose and clean the filter.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems
Why doesn’t the washing machine drain or spin-dry?
•
If this failure is detected, F02 will appear on the display.
The reasons for the F02 indicator may be the following:
•
•
The washing machine drain pump blocked, building drainage pipes blocked, or incorrect pump electrical connection.
Solution: if the pump is blocked, gain access to it as described in section 2, maintaining and cleaning the appliance.
Why doesn’t the washing machine spin-dry?
This may be due to the following:
•
•
•
If this failure is detected, C03 will appear on the display.
This may be due to an uneven distribution of clothes in the drum and may cause an excessive level of vibrations.
The solution is to select a spin-drying programme.
Why can’t I see any water in the drum during the wash?
•
This is due to the fact that the washing machine is provided with a system which is able to adapt to the load and type
of fabrics, adjusting the levels of water and energy used, in order to preserve the environment. So, although the water
level you can see through the hatch may look low, there is no cause for concern as washing and rinsing efficiency will
still be optimum.
Why is there still some water in the dispenser?
•
This may be because the dispenser needs cleaning. This simple operation is described in Maintaining and cleaning
the appliance.
Why can’t I open the porthole door immediately after the wash has finished?
•
Washing machines today are provided with safety systems for users. One of these is that the washing machine
cannot be opened until it is certain that the drum is quite still. This is why the hatch cannot be opened for 2 minutes.
Other indications
•
The washing machine can detect other indications. When this happens a number of other indicators appear on the
display: F05, F06..., F10. If this happens, call CDA Customer Care.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
To contact our Customer Care Department, or for Service,
please contact us on the details below.
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
Download from Www.Somanuals.com. All Manuals Search And Download.
|