Brother Printer 1180 User Manual

GENERAL PRECAUTIONS  
TAPE CASSETTES  
SPACE KEY  
Use only Brother TZ tapes with this machine. Do not use tapes that do not have the  
mark.  
A TZ tape cassette is supplied with this unit.The Brother TZ tapes used with this machine are  
available in a variety of colours and three tape widths (6 mm, 9 mm and 12 mm).  
As on a word processor, press  
to add a blank space to your text.  
Tapes are available in three different widths: 6 mm, 9 mm and 12 mm.  
Do not pull the tape since this may damage the tape cassettes.  
Do not attempt to cut the tape while printing or feeding since this will damage the  
tape.  
Do not clean the machine with alcohol or other organic solvents. Use only a soft, dry  
cloth.  
1
2
3
Press in on the rough area at the top end of the machine and  
fold open the back cover.  
RETURN KEY  
If a tape cassette is already installed, remove it by pulling it  
straight up.  
Press  
when you wish to accept or confirm a setting, or end the first line of text and  
start the second.  
If the ink ribbon in the other tape cassette is loose, use your  
finger to wind the toothed wheel in the direction of the arrow on  
the cassette until there is no slack in the ribbon. Also, make sure  
that the end of the tape feeds under the tape guides.  
Note: If you are using a new tape cassette provided with a  
stopper, be sure to remove the stopper.  
G
G
To add a second line, press  
indicate the end of the first line and the beginning of the second.  
Note: Two lines of text can only be entered if 9-mm- or 12-mm-wide tape is installed.  
To accept or confirm a setting from a list, press once.  
once. The return mark ( ) appears in the text to  
Remove the batteries and disconnect the AC adapter if you do not intend to use the  
machine for an extended period of time.  
Note: If power is disconnected for more than three minutes, all text shown in the  
display and any text files stored in the memory will be lost.  
Do not put any foreign objects into or anything on the machine.  
Do not expose the machine to high temperatures or high humidity. Never leave it on  
the dashboard or in the back of your car.  
Do not use the machine in dusty places, and keep it out of both direct sunlight and  
rain.  
Do not leave any rubber or vinyl on the machine for an extended period of time.  
Doing so may cause staining.  
4
Insert the tape cassette firmly into the compartment, making  
sure that the entire back of the cassette contacts the bottom of  
the compartment.  
Note: When inserting a tape cassette, make sure that the inner  
ribbon does not catch on the corner of the metal guide.  
ACCENTED CHARACTERS  
USER’S GUIDE  
You can also choose from a list of other accented characters that can be added to your  
text.  
5
6
Securely close the back cover, making sure that it snaps into place.  
After inserting a new tape cassette, advance the tape by holding down  
and  
Feed the tape by holding down  
and pressing  
once,  
Letter  
Accented character  
Letter  
Accented character  
and then push in the tape cutter lever to cut the tape.  
pressing once.  
A
C
E
I
À
Ç
È
Í
Á
Ä
Â
Ã
Æ
a
c
e
i
à
ç
è
í
á
ä
â
ã
æ
Do not touch the print head mechanism. If the head is touched, clean it immediately  
with a soft wipe (e.g., a cotton swab) to avoid permanent damage.  
To avoid injuries, do not touch the cutter’s edge.  
É
Ï
Ë
Î
Ê
é
ï
ë
î
ê
STARTING  
Use only the AC adapter designed exclusively for this machine. Use of any  
other adapter will damage the machine and such damages may not be covered  
under warranty [For PT-1100 only].  
N
O
U
Ñ
Ó
Ù
n
o
u
ñ
ó
ù
Press  
. If batteries have been installed or the machine has been plugged in using the  
optional AC adapter, the previous session’s information is displayed when the machine is  
turned on. This feature allows you to stop work on a label and turn off the machine, then  
return to it later without having to re-enter the text.  
Ö
Ú
Ô
Ü
Õ
Û
ö
ú
ô
ü
õ
û
Please contact your Brother dealer for details.  
The machine automatically turns off if no key is pressed within five minutes.The current  
session’s information is stored in the machine’s internal memory and displayed when the  
machine is later turned on again.  
1
Press  
Note: To quit the following procedure at any time without making any changes, press  
Hold down and press . The message “A-U?” appears in the display.  
Press the key for the letter in the accented character that you wish to add, and then  
if you want the accented character to be an uppercase letter.  
POWER SUPPLY  
.
2
3
Batteries  
CODE KEY  
Since this machine is compact and portable, it can be used anywhere by installing six  
AAA alkaline batteries (LR03). When changing the batteries, always replace all six at the  
same time.  
press  
and  
until the cursor is positioned under the desired accented  
character.  
Press  
By holding down  
and pressing a key with a function, character or accent written  
4
to add the selected character to your text.  
above it, you can use the corresponding function or add the corresponding character to  
your text.  
1
2
3
Press in on the rough area at the top end of the machine and  
fold open the back cover.  
If batteries are already installed, remove the tape cassette (if one is  
installed) by pulling it straight out, and then remove the batteries.  
SYMBOLS  
A
LA3776001  
CAPS KEY  
Insert the batteries into the battery compartment with the  
positive end of the bottom three batteries pointing toward the top  
end of the machine, and the positive end of the top three  
batteries pointing in the opposite direction.  
In addition to the letters, symbols, and numerals on and above the keys, there are 72  
symbols available with the Symbol function. These symbols are divided into 9 groups,  
corresponding to the letters A through I.  
By pressing  
to enter Caps mode, you can add upper-case letters to your text by  
simply pressing the character keys. When this mode is on, the Caps indicator in the top-  
left corner of the display comes on. To exit Caps mode, press  
until the Caps  
Group  
Symbols  
Note: When replacing the batteries, insert the new ones within  
three minutes of removing the old ones, otherwise all text  
shown in the display and any text files stored in the  
memory will be lost (unless the machine is plugged into  
an outlet with the AC adapter).  
indicator goes off.  
A
B
C
D
E
F
G
H
I
Ü
í
ü
ó
Ç
ú
Ñ
;
ç
Æ
æ
ã
á
é
Ã
¡
#
ñ
Õ
·
õ
¿
§
÷
#
=
NUM KEY  
°
%
]
+
×
2
3
By pressing  
to enter Num mode, you can add numbers to your text by simply  
$
¢
[
4
Securely close the back cover, making sure that it snaps into place.  
2
3
pressing the corresponding keys. When this mode is on, the Num indicator in the bottom-  
TM  
®
©
4
left corner of the display comes on. To exit Num mode, press  
until the Num  
Optional AC adapter [For PT-1100 only]  
indicator goes off.  
The AC adapter allows you to use this machine wherever an electrical outlet is available.  
Use only the AC adapter designed exclusively for this machine.  
_
~
DISPLAY  
1
Insert the plug on the adapter cord into the adapter jack on the bottom end of the  
machine.  
1
2
Press  
Press the key for the letter of the group containing the symbol that you wish to add,  
and then press and until the cursor is positioned under the desired symbol.  
Press to add the symbol to the text.  
. The message “A-I?” appears in the display.  
This machine’s LCD shows one row of 8 characters; however, the text that you enter can  
be up to 55 characters in length. The 8-character display is like a window which moves  
across the text.  
2
Insert the plug into the nearest standard electrical outlet.  
3
OVERVIEW  
SIZE  
1234567890123456789012345678901234567890123456789012345  
The characters in the text can be set to one of five different sizes in addition to AUTO,  
which automatically adjusts the characters to the largest possible size according to the  
width of the installed tape. The currently selected size setting is shown by the indicators at  
the top of the display. All of the size indicators light up when the AUTO setting is selected.  
Tape cutter lever  
Display  
Backspace key  
CURSOR MOVEMENT  
Return key  
Back cover  
SIZE1 (A: standard size)  
SIZE2 (A: double width)  
SIZE3 (A: double height)  
Function key  
You can view and edit different parts of the text by moving the cursor backward and  
forward.  
G
G
G
To move the cursor one character at a time, press  
or  
.
SIZE4 (A: double width & double height)  
SIZE5  
(A: 4× width & double height)  
Caps key  
To move the cursor to the beginning of the text, hold down  
To move the cursor to the end of the text, hold down  
and press  
.
and press  
.
.
e r e n c e  
o r f u t u r e r e f  
u a l i n a h a n d e y k e p p l a t h c e m f a n  
A l t h o u g h t h i s m a c h i n e i s e a s y t o u s e  
a c p t i r c a l m a c h i n e  
Note:  
Num key  
On/Off key  
t i n g a n d o r e s t a r  
x t r e m e l y e i t a n e  
u a l c a r e f u l l y b e f o u r e a d t h i s m a n , w e s u g g e s t t h a t y  
• If there are two lines of text, they are printed with the SIZE1 setting applied,  
regardless of the selected size setting.  
Print head  
.
- 1 1 0 0 / 1 1 8 0 m a k m a o n r c e o f t h e P T  
e s s i o n a l p r  
, t h e q u a l i t y a n d p e r f t , h y e l a b a f c o t r o t r h e h o m e  
y a o b r o r u t u t e o r v g w e n t t a s k s t h a t r o e Y u q u n i o r e l o p n r g o e f r h a  
BACKSPACE KEY  
To quit the following procedure at any time without making any changes, press  
.
, t h e  
I n t h e i n o t f i n f i c g e .  
x c i t i n g c o l o u r s .  
. I n a d d i t i o n , t h e v  
e r e n t w i d t h s a n d i e n t l a b e l o s u w t i o t w h p s d r i y f f l e a l l o a v i l a b  
a c t e r c h s a i z r e s a n d s t y l e s t o d e s i g n b e a u t i f u l c u s t o m l a b e l s  
1
2
Press  
.
This key can be used to remove characters from your text, clear all of the text or cancel  
the current function and return to the text input mode.  
i d t g r e s  
a m y e s f r  
i e t a y r o f t a p e c a r  
Batteries  
,
S e l e c t f r o m t h e m o a r n a n y a p p l i c a t i o n . o u c a n c r e a t e - l 1 a 1 b 0 e 0 l w s / 1 f P 1 T 8 0 o , u y r n e W i t h y  
Press  
and  
until SIZE is displayed, and then press  
(or  
). The  
G
To delete the character to the left of the cursor or to cancel a function, press  
.
current size setting appears in the display.  
3
4
Press  
Press  
and  
(or  
until the desired size setting is displayed.  
I N T R O D U C T I O N  
G
To clear all of the text that is currently entered, hold down and press  
.
) to apply the selected size setting to the text.  
Tape cassette  
Tape exit slot  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Blockhead Video Game Controller BHR1000 User Manual
Bosch Appliances Network Card C900V2 User Manual
Bosch Appliances Range HBL 73 User Manual
Breville Mixer BSK500XL User Manual
Briggs Stratton Lawn Mower 23 User Manual
Broan Ventilation Hood QDE SERIES User Manual
Brunton Stove 81 100692 User Manual
Bushnell Binoculars 118213 User Manual
Cisco Systems IP Phone WIP300 User Manual
Cisco Systems Model Vehicle 2960 User Manual