version C
MFC-3100C
Quick Setup Guide
If you cannot solve a problem:
THANK YOU!
Refer to Frequently Asked Questions (FAQs) on Brother World Wide Web;
CONGRATULATIONS ON PURCHASING THE ULTIMATE BROTHER MACHINE.
WE ARE SURE YOU WILL BE THRILLED WITH THE CONVENIENT WAY YOUR NEW
MACHINE PERFORMS SO MANY TASKS WITH DAZZLING RESULTS!
URL:
Call Brother Customer Service at;
USA:
1-800-284-4329 (9 AM - 5 PM EST)
Follow these simple instructions in numerical order.
1-800-284-3238 (TTY service for the hearing impaired)
1-877-BROTHER (8 AM - 8 PM EST)
1-514-685-6464 (in Montreal)
In Canada:
1
For more details, press Reports,
on your machine or see your Owner’s Manual.
Packing List
Remove the Protective Yellow Bar
1
2
Ink Cartridges
Top Cover
Document Support
A. Open the control panel cover by pulling it toward
you (1), and then lift the top cover toward the
back (2).
Filter Core for
USB Cable
Cable Tie
Control Panel
Cover
Paper Wire
Extension
Filter Core for
Bi-directional
IEEE 1284
Telephone
Line Cord
Card Stock
Support
Software
License
Agreement
Document Wire
Extension
B. Pull the protective yellow bar out of the machine.
Do not throw away the protective yellow bar.
You will need it for future transportation.
Paper Tray
Accessory
Order Form
Test Sheet
Owner’s
Manual
(For USA Only)
CD-ROM
Quick Setup Guide
C. Close the top cover, and then close the control
Keep the packing materials for possible future transport. If you do not pack the
machine properly, it may void your warranty.
panel cover.
ProtectiveYellow Bar
If you are sharing one
phone line with an external
telephone answering
device, connect it now to
the external jack.
If you are sharing one
Install phone Line and
Power Cord
4
3
phone line with an external
telephone, connect it as
shown below.
Power Cord
Telephone
Line Cord
Note: Please select “TAD” on your machine if you have
an external answering machine. (For more details,
see page 2-11 to 2-13 in Owner’s Manual that is
included on the CD-ROM.)
Do NOT connect the Parallel or USB cable.
Must select EXT.TEL/TAD mode. (See Step 9.)
Attach Trays and Extensions
Load Paper
5
6
A.
C.
A. Fan the paper well. Gently insert the paper. Make sure the
print side is toward you and the paper level is stacked below
the paper guide line.
Plastic Paper Tray
Extension
Paper Wire Extension
Paper Guide Line
B.
D.
Document Wire Extension
B. Press and slide the guide to fit the paper width.
Document Support
Paper Width Guide
Please attach the trays to prevent jams and to maintain print quality.
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
MFC-3100C Control Panel
Navigation Keys
1
You can print a list of basic operational steps by pressing Reports,
.
* Access the Menu
* Go to next menu level
* Accept an option
* Scroll through the current menu level
* Back to previous menu level
* Forward to next menu level
* Exit the Menu
Select a Receive
Mode
Set Date and Time
Set Station ID
9
10
11
Choose the mode that best suits your needs by
Your MFC displays the date and time, and prints it on
every fax you send.
You should store your name and fax number to be
printed on all fax pages you send.
pressing Receive Mode repeatedly until the
LCD shows the setting you want to use.
1
1
A. Press Menu/Set,
,
.
4
A. Press Menu/Set,
,
3
.
FAX ONLY
The MFC automatically answers every call as a fax.
4.STATION ID
FAX:
3.DATE/TIME
YEAR:XX
B. Enter your fax number, then press Menu/Set.
B. Enter the last two digits of the year and press
Menu/Set.
EXT.TEL/TAD
NAME:
An external TAD (telephone answering device)
answers every call and stores voice messages in
memory; fax messages are printed.
An external telephone operates as if in MANUAL
mode.
MONTH:XX
C. Enter two digits for the month and press
Menu/Set.
C. Enter your name using the dial pad and the chart
below, then press Menu/Set. Use the right arrow to
create spaces.
D. Press Stop/Exit.
DAY:XX
For more details, see
Key
2
3
4
5
6
7
8
9
once
A
D
G
J
M
P
T
twice three times four times five times
D. Enter two digits for the day and press Menu/Set.
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
A
D
G
J
M
7
MANUAL
pages 4-2 to 4-3 in
Owner’s Manual or 5-2
to 5-3 in Owner’s
Manual that is included
on the CD-ROM.
TIME:XX:XX
E. Enter the time in 24-hour format and press
Menu/Set.
You control the phone line and must answer every
call yourself.
L
O
R
V
Y
T
9
For more details, see page 5-1 in Owner’s Manual or
page 6-1 in Owner’s Manual that is included on the CD-
ROM.
W
F. Press Stop/Exit.
Note: If you can’t step forward, press Stop/Exit and
Note: If you can’t step forward, press Stop/Exit and
repeat from step A.
repeat from step A.
For the USA, complete the Warranty
For Improving Print Quality
12 Registration and Test Sheet
...and fax it to Brother
at: 1-877-268-9575
If horizontal streaks appear like this, clean the print head.
If characters and lines are stacked like this, check alignment.
A. Fill out the Test Sheet.
B. Place the sheet face down in the ADF.
C. Enter the fax number: 1-877-268-9575.
D. Press
Black Fax Start.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the MFC and PC to Work Together
BeforeYou Begin
•
•
•
•
You must set up the hardware and install the driver before you can use your MFC as a printer and scanner with your applications.
Please see the README.WRI file in the root directory of the CD-ROM for last-minute important installation and troubleshooting information.
Please purchase the appropriate interface cable you intend to use (Parallel or USB).
If you have any problem for installation, visit us at: http://solutions.brother.com
Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).
Follow the instructions in this guide for your operating system and interface.
For Windows® 95/98/98SE/Me/2000 Users
MAKE SURE THAT YOU FOLLOWED THE SET-UP INSTRUCTIONS ON PAGE 1 TO 3 BEFORE
CONTINUING
Unplug the MFC from the AC outlet and disconnect your MFC from your computer
Step 1.
if you already connected an interface cable.
Turn on your computer.
Step 2.
For Windows® 2000 Professional, you must be logged on as the Administrator.
Insert the CD-ROM into the CD-ROM drive. If the model name screen appears,
Step 3.
click on your model name. The CD-ROM main menu will appear.
(If this window does not appear, use Windows® Explorer to run the setup.exe program from the root
directory of the Brother CD-ROM.)
1. Click Install Software.
2. Click Multi-Function Link® Pro Suite 3. Click Install.
in Main Application. *1
4. The InstallShield Wizard Setup
window will appear briefly, followed by
the PaperPort® Setup window. Click
Yes.
5. When the PaperPort® Setup window 6. When the Choose Destination Location 7. When Register Today screen appears, 8. When the Brother MFL Pro Suite
displays your Name and Company,
either change or accept them, and then
click Next.
window displays the path where the
PaperPort® files will be installed, either
change or accept, and then click Next.
click Next.This is registration for Paper
Installation window appears, click
Next to begin installing the Multi-
Function Link® Pro Suite. *2
Port®. Follow the instructions.
For Parallel
Please see NEXT PAGE
For USB
9. When the SetupType window appears,
select Standard, and then click Next.
The application files will be copied to
your computer.
10. The Connect Cable window will appear.
*1 Multi-Function Link® Pro Suite includes Printer Driver, Scanner Driver, *2 If an error message appears during the installation *3 Even if you select NO, later you will be able to
ScanSoft™ PaperPort®, ScanSoft™Text Bridge®, PC-FAX software, Remote
Setup and True Type fonts. PaperPort® is a document management
application for viewing scanned documents. ScanSoft™ TextBridge®, which
is integrated into PaperPort®, is an OCR application that converts an image
into text and inserts it into your default word processor.
process, or you have previously installed MFL Pro
Suite, you will first have to uninstall it. From the
Start menu, select Programs, Brother, Brother
MFL Pro Suite, Uninstall, and then follow the
instructions on the screen.
launch the Brother Control Center to use the
Scan to key.See AutoLoad the Brother Control
Center, Chapter 14 in the On-Line
Documentation (Owner’s Manual) on the CD-
ROM.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the MFC to your PC with Parallel Cable.
Step 4.
A. Connect the Filter Core and Cable Tie to the parallel interface cable.
B. Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips.
C. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of
your computer’s parallel printer port, see the User’s Guide for your computer.
Turn on the MFC by plugging in the power cord.
Step 5.
The installation of the Brother driver will automatically start.
Step 6.
Follow the instructions on the screen.
( For Windows® 95/98/98SE/Me Users )
( For Windows® 2000 Professional User )
1. In the Connect Cable window, 2. When the above screen appears,
1. In the Connect Cable window, 2. When the above screen appears,
click Next.
click Finish and wait as the PC
restarts Windows® and continues
the installation.
click Next.
Click Finish and wait as the PC
restarts Windows® and continues
the installation.
3. Click Yes to have the Control
Center loaded each time
Windows® is started. The
Control Center will appear as an
icon in the task tray. If you click
No the Scan keys on the MFC
will be disabled. *3
3. When the Digital Signature Not 4. Click Yes to have the Control
Found dialog boxes appear, click
Yes to install the driver.
Center loaded each timeWindows®
is started. The Control Center will
appear as an icon in the task tray.
If you click No the Scan to key on
the MFC will be disabled. *3
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
Turn on the MFC by plugging in the power cord.
Step 4.
Step 5.
Connect the Filter Core and Cable Tie to the USB cable,
and then connect the MFC to your PC with the USB cable.
(It will take a few seconds for the installation screen to appear.)
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
( For Windows® 98/98SE/Me Users )
( For Windows® 2000 Users )
1. In the Add Printer Wizard 2. Accept the default Printer 3. Select Yes (recommended),
1. When the Digital Signature Not
Found dialog boxes appear, click
Yes to install the driver.
window, select BRUSB: USB
Printer Port, and then click
Next.
name by selecting Yes, and
then click Next.
and then click Finish. A test
page will be printed so you can
check the print quality.
4. If the test page is printed 5. Select Yes to restart your 6. Click Yes to have the Control
2. Select Finish to restart your
correctly, click Yes.
computer, and then click
Center loaded each time
Windows® is started. The
Control Center will appear as
an icon in the task tray. If you
click No the Scan to key on
the MFC will be disabled. *3
computer.
Finish.
If you click No, follow the
prompts on the screen to
correct the problem.
3. Click Yes to have the Control
Center loaded each timeWindows®
is started. The Control Center will
appear as an icon in the task tray.
If you click No the Scan to key on
the MFC will be disabled. *3
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows NT® Workstation Version 4.0 Users
MAKE SURE THAT YOU FOLLOWED THE
SET-UP INSTRUCTIONS ON PAGE 1 TO 3
BEFORE CONTINUING
Turn on the MFC by plugging in
the power cord.
Step 3.
Insert the CD-ROM into the CD-
ROM drive. Then, follow the
instructions on the screen.
Step 4.
Check that your computer is
Step 1.
turned on.
You must be logged on as the Administrator.
(Same step as for Windows® 95/98/98SE/Me/2000 Users Step 3. ,
1
to
9)
10. Select Yes to restart your computer, and
then click Finish.
Connect the MFC to your PC
Step 2.
with the Parallel Cable.
A. Connect the Filter Core and Cable Tie to the parallel interface cable.
B. Connect the parallel interface cable to the parallel interface port of the MFC and
secure the wire clips.
C. Connect the interface cable to the printer port of the computer and secure it with the two screws.
For the location of your computer’s parallel printer port, see the User’s Guide for your computer.
11. Click Yes to have the Control Center
loaded each time Windows is started.
The Control Center will appear as an
icon in the task bar. If you click No, the
Scan to key on the MFC will be
disabled.*3
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
For Apple® Macintosh®
QuickDraw® Driver for OS 8.6/9.0/9.0.4/9.1 Users
MAKE SURE THAT YOU FOLLOWED THE
SET-UP INSTRUCTIONS ON PAGE 1 TO 3
BEFORE CONTINUING
Connect the MFC to your Macintosh
Step 5.
with the USB cable, and then turn
on the MFC
by plugging
in the power
cord.
Make sure your MFC power cord
Step 1.
is unplugged and your Macintosh
is turned on.
Make sure you do NOT connect your MFC to your Macintosh
Select the Printer.
Step 6.
Insert the CD-ROM into your
Step 2.
CD-ROM drive.
1. From the Apple menu, open the Chooser.
2. Click to MFL Pro Color icon you
installed. On the right side of the
Chooser, select the printer to which you
want to print. Close the Chooser.
Installing MFL Pro Driver
1. When the window appears, double-click
MFL PRO Suite Driver Installer to
install the printer and scanner drivers.
After the installation is completed, the
screen prompts you to restart your
Macintosh.
Install Paper Port.
Step 7.
1. Double-click the PaperPort®5.5 Installer. *1
2. Follow the instructions on the screen.
Restart your Macintosh so it can
Step 3.
recognize the new driver.
Connect the Filter Core and
Step 4.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
Cable Tie to the USB cable.
What is included on the CD-ROM
Windows
Macintosh
You can get a variety of Install Software
You can get a variety of MFL Pro Suite Driver Installer
information from this
CD-ROM
information from this
You can install printer and scanner drivers and the various utility
items.
You can install the PC Fax Send, printer and scanner drivers and
CD-ROM
the various utility items.
On-Line Registration
You will be pointed to a directory on the Brother Product Registration Web
page.
On-Line Documentation
View the Owner’s Manual and other documentation.
Brother Support
PaperPort 5.5 Installer
You can install a document management application used to view
scanned documents.
ReadMe!
You can get important information and troubleshooting tips.
(For Windows®)
(For Macintosh®)
Documents
Get all contact you need if you have to get in touch with our
Customer Service, or Brother Authorized Service Center.
View the Owner’s Manual and other documentations.
Help
Helpful hints.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
|