FAX-1920CN
MFC-3320CN
®
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother numbers
IMPORTANT
For technical help, you must call the country where you bought the
machine. Calls must be made from within that country.
Register your product
By registering your product with Brother International Corporation, you will be
recorded as the original owner of the product. Your registration with Brother:
■ may serve as confirmation of the purchase date of your product
should you lose your receipt;
■ may support an insurance claim by you in the event of product
loss covered by insurance; and,
■
will help us notify you of enhancements to your product and special offers.
Please complete and fax the Brother Warranty Registration And Test Sheet
or, for your convenience and most efficient way to register your new
product, register on-line at
Frequently asked questions (FAQs)
The Brother Solutions Center is our one-stop resource for all your Fax
Machine/Multi-Function Center needs. You can download the latest
software and utilities, read FAQs and troubleshooting tips, and go to the
“Solutions” section to learn how to get the most from your Brother product.
You can check here for Brother driver updates.
For Customer Service
In USA:
1-800-284-4329 (voice)
1-901-379-1215 (fax)
1-800-284-3238 (TTY service for the hearing-impaired)
In Canada: 1-877-BROTHER (voice)
(514) 685-4898 (fax)
(514) 685-6464 (voice) In Montreal
Service Center Locator (USA only)
For the location of a Brother authorized service center, call 1-800-284-4357.
Service Center Locations (Canada only)
For the location of a Brother authorized service center, call 1-877-BROTHER.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother fax back system (USA only)
Brother has installed an easy-to-use fax back system, so you can get
instant answers to common technical questions and product information for
all Brother products. This system is available 24 hours a day, 7 days a
week. You can use the system to receive faxed instructions and an Index of
fax back subjects.
In USA only:
1-800-521-2846
The Brother fax back system number has been pre-programmed on One-
Touch Key 01.
Ordering accessories and supplies
For best quality results use only genuine Brother accessories, which are
available at most Brother retailers. If you cannot find the accessory you
need and you have a Visa, MasterCard, Discover, or American Express
credit card, you can order accessories directly from Brother. (In the USA,
you can visit us online for a complete selection of the Brother accessories
and supplies that are available for purchase.)
In USA:
1-888-879-3232 (voice)
1-800-947-1445 (fax)
In Canada: 1-877-BROTHER (voice)
Description
Item
Ink Cartridge<black>
LC31BK (Prints up to 500 pages)
LC31C (Prints up to 400 pages)
LC31M (Prints up to 400 pages)
LC31Y (Prints up to 400 pages)
LG3077001
LE0446011 (FAX-1920CN)
LE6681001 (FAX-1920CN)
LE6396002 (FAX-1920CN)
LE6396003 (MFC-3320CN)
Ink Cartridge<cyan>(blue)
Ink Cartridge<magenta>(red)
Ink Cartridge<yellow>
Telephone Line Cord
Telephone Handset
Handset Curled Cord
ADF Document Support
ADF Document Output Support LE3305001
Output Paper Support LE9840002 (FAX-1920CN)
LE9840001 (MFC-3320CN)
Power Protector for A/C Power QPD120
Telephone Line Surges and
Voltage Spikes (2 outlets)
Power Protector for A/C Power FX120
Telephone Line Surges and
Voltage Spikes (8 outlets)
User's Guide
LE9966001 (English for USA and Canada)
LF4022001 (French For Canada)
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice - Disclaimer of Warranties
(USA and Canada)
BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS,
EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER’S
LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
REGARDING THE SOFTWARE. BROTHER’S LICENSOR(S) DOES
NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS
REGARDING THE USE OR THE RESULTS OF THE USE OF THE
SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY,
RELIABILITY, CURRENTNESS OR OTHERWISE. THE ENTIRE RISK
AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS
ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS
NOT PERMITTED BY SOME STATES IN THE USA AND SOME
PROVINCES IN CANADA. THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU.
IN NO EVENT WILL BROTHER’S LICENSOR(S) BE LIABLE TO YOU
FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES
(INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION,
AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE
THE SOFTWARE EVEN IF BROTHER’S LICENSOR HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE
SOME STATES IN THE USA AND SOME PROVINCES IN CANADA
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU. IN ANY EVENT
BROTHER’S LICENSOR’S LIABILITY TO YOU FOR ACTUAL
DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS
OF THE FORM OF THE ACTION (WHETHER IN CONTRACT, TORT
(INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR
OTHERWISE), WILL BE LIMITED TO $50.
Compilation and Publication Notice
Under the supervision of Brother Industries Ltd., this manual has been
compiled and published, covering the latest product descriptions and
specifications.
The contents of this manual and the specifications of this product are
subject to change without notice.
Brother reserves the right to make changes without notice in the
specifications and materials contained herein and shall not be
responsible for any damages (including consequential) caused by
reliance on the materials presented, including but not limited to
typographical and other errors relating to the publication.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother® One Year Limited Warranty and Replacement Service
(USA only)
Who is covered:
but not limited to damage resulting from
use of non Brother®-brand parts and
Consumable and Accessory Items);
• This limited warranty (“warranty”) is given
only to the original end-use/retail
purchaser (referred to in this warranty as
“Original Purchaser”) of the accompanying
product, consumables and accessories
(collectively referred to in this warranty as
“this Product”).
(4) Consumable and Accessory Items that
expired in accordance with a rated life;
and,
(5) Problems arising from other than defects
in materials or workmanship.
• If you purchased a product from someone
other than an authorized Brother reseller in
the United States or if the product was
used (including but not limited to floor
models or refurbished product), prior to
your purchase you are not the Original
Purchaser and the product that you
purchased is not covered by this warranty.
This limited warranty is VOID if this Product
has been altered or modified in any way
(including but not limited to attempted
warranty repair without authorization from
Brother and/or alteration/removal of the
serial number).
What to do if you think your Product is
eligible for warranty service:
What is covered:
Report your issue to either our Customer
Service Hotline at 1-800-284-4329 or a
Brother Authorized Service Center within
the applicable warranty period. Supply
Brother or the Brother Authorized Service
Center with a copy of your dated bill of sale
showing that this Product was purchased
within the U.S. For the name of local Brother
• This Product includes a Machine and
Consumable and Accessory Items.
Consumable and Accessory Items include
but are not limited to print heads, toner,
drums, ink cartridges, print cartridges, refill
ribbons, therma PLUS paper and thermal
paper.
• Except as otherwise provided herein,
Brother warrants that the Machine and the
Authorized
1-800-521-2846.
What Brother will ask you to do:
After contacting Brother or
Service
Center(s),
call
accompanying
Consumable
and
Accessory Items will be free from defects in
materials and workmanship, when used
under normal conditions.
a
Brother
Authorized Service Center, you may be
required to deliver (by hand if you prefer) or
send the Product properly packaged, freight
prepaid, to the Authorized Service Center
together with a photocopy of your bill of sale.
You are responsible for the cost of
• This warranty applies only to products
purchased and used in the United States.
For products purchased in, but used
outside, the United States, this warranty
covers only warranty service within the
United States (and does not include
shipping outside the United States).
shipping,
packing
product,
and
insurance (if you desire). You are also
responsible for loss or damage to this
Product in shipping.
What is the length of the Warranty Periods:
• Machines: one year from the original
purchase date.
What Brother will do:
If the problem reported concerning your
Machine and/or accompanying Consumable
and Accessory Items is covered by this
warranty and if you first reported the problem
to Brother or an Authorized Service Center
within the applicable warranty period,
Brother or its Authorized Service Center will
repair or replace the Machine and/or
accompanying Consumable and Accessory
Items at no charge to you for parts or labor.
The decision as to whether to repair or
replace the Machine and/or accompanying
Consumable and Accessory Items is made
by Brother in its sole discretion. Brother
reserves the right to supply a refurbished or
• Accompanying
Consumable
and
Accessory Items: 90 days from the original
purchase date or the rated life of
consumable, whichever comes first.
What is NOT covered:
This warranty does not cover:
(1) Physical damage to this Product;
(2) Damage caused by improper installation,
improper or abnormal use, misuse,
neglect or accident (including but not
limited to transporting this Product
without the proper preparation and/or
packaging);
remanufactured
replacement
Machine
(3) Damage caused by another device or
software used with this Product (including
and/or accompanying Consumable and
Accessory Items and use refurbished parts
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother® One Year Limited Warranty and Replacement Service
(USA only)
provided such replacement products
conform to the manufacturer's specifications
for new product/parts. The repaired or
replacement Machine and/or accompanying
Consumable and Accessory Items will be
returned to you freight prepaid or made
available for you to pick up at a conveniently
located Authorized Service Center.
If the Machine and/or accompanying
Consumable and Accessory Items are not
covered by this warranty (either stage), you
will be charged for shipping the Machine
and/or accompanying Consumable and
Accessory Items back to you.
covered by the balance of the limited
warranty period remaining on the original
Product, plus an additional thirty (30) days.
You will keep the replacement Machine that
is sent to you and your original Machine shall
become the property of Brother. Retain your
original Accessory Items and a copy of
the return freight bill, signed by the
courier.
Limitations:
Brother is not responsible for damage to or
loss of any equipment, media, programs or
data related to the use of this Product.
Except for that repair or replacement as
described above, Brother shall not be liable
for any direct, indirect, incidental or
consequential damages or specific relief.
Because some states do not allow the
exclusion or limitation of consequential or
incidental damages, the above limitation
may not apply to you.
THIS WARRANTY IS GIVEN IN LIEU OF
ALL OTHER WARRANTIES, WRITTEN OR
ORAL, WHETHER EXPRESSED BY
AFFIRMATION, PROMISE, DESCRIPTION,
DRAWING, MODEL OR SAMPLE. ANY
AND ALL WARRANTIES OTHER THAN
THIS ONE, WHETHER EXPRESS OR
The foregoing are your sole (i.e., only)
and exclusive remedies under this
warranty.
What happens when Brother elects to
replace your Machine:
When a replacement Machine is authorized
by Brother, and you have delivered the
Machine to an Authorized Service Center,
the Authorized Service Center will provide
you with
a
replacement Machine after
receiving one from Brother. If you are
dealing directly with Brother, Brother will
send to you a replacement Machine with the
understanding that you will, after receipt of
the replacement Machine, supply the
required proof of purchase information,
together with the Machine that Brother
agreed to replace. You are then expected to
pack the Machine that Brother agreed to
replace in the package from the replacement
Machine and return it to Brother using the
pre-paid freight bill supplied by Brother in
accordance with the instructions provided by
Brother. Since you will be in possession of
two machines, Brother will require that you
provide a valid major credit card number.
Brother will issue a hold against the credit
card account number that you provide until
Brother receives your original Product and
determines that your original Product is
entitled to warranty coverage. Your credit
card will be charged up to the cost of a new
Product only if: (i) you do not return your
original Product to Brother within five (5)
business days; (ii) the problems with your
original Product are not covered by the
limited warranty; (iii) the proper packaging
instructions are not followed and has caused
damage to the product; or (iv) the warranty
period on your original Product has expired
or has not been sufficiently validated with a
copy of the proof of purchase (bill of sale).
The replacement Machine you receive (even
if refurbished or remanufactured) will be
IMPLIED,
INCLUDING
IMPLIED
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR
PURPOSE, ARE HEREBY DISCLAIMED.
A
PARTICULAR
• This Limited Warranty is the only warranty
that Brother is giving for this Product. It is
the final expression and the exclusive and
only statement of Brother's obligations to
you. It replaces all other agreements and
understandings that you may have with
Brother or its representatives.
• This warranty gives you certain rights and
you may also have other rights that may
vary from state to state.
• This Limited Warranty (and Brother's
obligation to you) may not be changed in
any way unless you and Brother sign the
same piece of paper in which we (1) refer
to this Product and your bill of sale date, (2)
describe the change to this warranty and
(3) agree to make that change.
Important: We recommend that you keep all
original packing materials, in the event that
you ship this product.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
BROTHER MULTIFUNCTION CENTER/FACSIMILE MACHINE
LIMITED WARRANTY
(Canada only)
Pursuant to this limited warranty of 1 year from the date of purchase for labour and parts,
Brother International Corporation (Canada) Ltd. (“Brother”), or its Authorized Service
Centers, will repair this MFC/Facsimile machine free of charge if defective in material or
workmanship. This Limited Warranty does not include cleaning, consumables
(including, without limitation, print cartridges, print head, toner and drum) or damage
caused by accident, neglect, misuse or improper installation or operation, any damage
caused from service, maintenance, modifications, or tampering by anyone other than a
Brother Authorized Service Representative, or from the use of supplies or consumable
items that are non-Brother products. Operation of the MFC/Facsimile machine in excess
of the specifications or with the Serial Number or Rating Label removed shall be deemed
abuse and all repairs thereafter shall be the sole liability of the end-user/purchaser. In
order to obtain warranty service, the MFC/Facsimile machine must be delivered or
shipped freight prepaid by the end user/purchaser to a “Brother” Authorized Service
Center, together with your Proof of Purchase in the form of a Sales Receipt.
For laser products: Failure to remove the Toner Cartridge (and Toner Drum Unit on
applicable models) during shipping will cause severe damage to the MFC/Facsimile and
will VOID the Warranty. (Refer to your User’s Guide for proper packaging.)
For ink-jet products: Do not remove the ink cartridges during shipping. Damage to your
print head resulting from packing without the ink cartridges will VOID your warranty.
(Refer to your User’s Guide for proper packaging.)
BROTHER DISCLAIMS ALL OTHER WARRANTIES EXPRESSED OR IMPLIED
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, EXCEPT TO
THE EXTENT THAT ANY WARRANTIES IMPLIED BY LAW CANNOT BE VALIDLY
WAIVED.
No oral or written information, advice or representation provided by Brother, its
Authorized Service Centers, Distributors, Dealers, Agents or employees, shall create
another warranty or modify this warranty. This warranty states Brother’s entire liability
and your exclusive remedy against Brother for any failure of the MFC/Facsimile machine
to operate properly.
Neither Brother nor anyone else involved in the development, production, or delivery of
this MFC/Facsimile machine shall be liable for any indirect, incidental, special,
consequential, exemplary, or punitive damages, including lost profits, arising from the
use of or inability to use the product, even if advised by the end user/purchaser of the
possibility of such damages. Since some Provinces do not allow the above limitation of
liability, such limitation may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights
which vary from Providence to Providence.
Warranty Service is available at Brother Authorized Service Centers throughout
Canada. For Technical Support or for the name and location of your nearest Authorized
Service Center call 1-877-BROTHER. Within Montreal, please call (514) 685-6464.
Internet support: [email protected] or browse
Brother’s Web Site: www.brother.com
Brother International Corporation (Canada) Ltd.
1 Rue Hôtel de Ville
Dollard-Des-Ormeaux, QC H9B 3H6
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
To use the machine safely
Please refer to these instructions for later reference and before
attempting any maintenance.
WARNING
There are high voltage
Do not handle the plug with wet
hands. Doing this might cause
an electrical shock.
electrodes inside the machine.
Before you clean the machine
or clear a paper jam, make
sure you have unplugged the
power cord from the AC power
outlet.
After you use your machine, the
area shown in the illustrations is
extremely HOT! To prevent
injuries, be careful not to put your
fingers in the area shown in the
illustration.
To prevent injuries, be careful
not to touch the area shaded in
the illustration.
To prevent injuries, be careful
not to touch the edge of the
metallic part shown in the
illustration.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Use caution when installing or modifying telephone lines. Never
touch telephone wires or terminals that are not insulated unless
the telephone line has been disconnected at the wall jack. Never
install telephone wiring during a lightning storm. Never install a
telephone wall jack in a wet location.
■ This product must be installed near an AC power outlet that is
easily accessible. In case of emergencies, you must disconnect
the power cord from the AC power outlet in order to shut off
power completely.
■ To reduce the risk of shock or fire, use only a No. 26 AWG or
larger telecommunication line cord.
Caution
■ Lightning and power surges can damage this product! We
recommend that you use a quality surge protection device on the
AC power line and on the telephone line, or unplug the cords
during a lightning storm.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons, including the
following:
1. Do not use this product near water, for example, near a
bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk of
electric shock from lightning.
3. Do not use the telephone to report a gas leak in the
vicinity of the leak.
4. Use only the power cord and batteries indicated in this
guide. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing a location
Place your machine on a flat, stable surface that is free of vibration
and shocks, such as a desk. Put the machine near a telephone wall
jack and a standard, grounded AC power outlet. Choose a location
where the temperature remains between 50°F and 95°F (10°-35°C).
Caution
■ Avoid placing your machine in a high-traffic area.
■ Avoid placing your machine on the carpet.
■ Do not place near heaters, air conditioners, water, chemicals, or
refrigerators.
■ Do not expose the machine to direct sunlight, excessive heat,
moisture, or dust.
■ Do not connect your machine to electrical outlets controlled by
wall switches or automatic timers.
■ Disruption of power can wipe out information in the machine’s
memory.
■ Do not connect your machine to electrical outlets on the same
circuit as large appliances or other equipment that might disrupt
the power supply.
■ Avoid interference sources, such as speakers or the base units
of cordless phones.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Reference Guide
Sending faxes
Storing numbers
Automatic Transmission
Storing One-Touch Dial
numbers
1
If it is not illuminated in
1
2
Press Menu/Set, 2, 3, 1.
green, press
(Fax).
Press the One-Touch key
where you want to store the
number.
2
Load your original. (See
3
4
Enter a number (up to 20
digits), and then press
Menu/Set.
Enter a name up to 15
characters (or leave it
blank), and then press
Menu/Set.
Enter the fax number using
One-Touch, Speed-Dial,
Search or the dial pad.
4
Press Black Start or
Color Start.
Receiving faxes
Select Receive Mode
(MFC-3320CN only)
5
Press Stop/Exit.
Storing Speed-Dial numbers
1
2
Press Menu/Set, 0,1.
Press or to select
Fax Only, Manual,
Fax/Telor External
TAD, and then press
Menu/Set.
1
2
Press Menu/Set, 2, 3, 2.
Using the dial pad, enter a
two-digit Speed-Dial
location number, and then
press Menu/Set.
Enter a number (up to 20
digits), and then press
Menu/Set.
Enter a name up to 15
characters (or leave it
blank), and then press
Menu/Set.
3
4
Select Receive Mode
(FAX-1920CN only)
1
2
Press Menu/Set, 0,1.
Press or to select
Fax Only, Manual, or
Fax/Tel, and then press
Menu/Set.
5
Press Stop/Exit.
x
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Load your original. (See
Dialing operations
One-Touch Dialing/
Speed-Dialing
Press Black Start or
Color Start.
1
If it is not illuminated in
green, press
(Fax).
Sorting multiple copies
(Using the ADF)
2
Load your original. (See
1
Press
(Copy) to
Press the One-Touch key of
the number you want to call.
illuminate it in green.
2
3
Load your original in the
ADF.
—OR—
Press Search/Speed Dial
,
Use the dial pad to enter the
number of copies you want
(up to 99).
press #, and then press the
two-digit Speed-Dial
number.
4
5
Press Options.
4
Press Black Start or
Color Start.
Press
or
select
Stack/Sort, and then
press Menu/Set.
Using Search
6
7
Press
or
select
1
If it is not illuminated in
green, press (Fax).
Press Search/Speed Dial
and then enter the first letter
of the name you’re looking
for.
Sort, and then press
Menu/Set.
Press Black Start or
Color Start.
2
,
Brother fax back system:
In USA: 1-800-521-2846
Brother Global Web Site:
Frequently Asked Questions (FAQs)
and Product Support
3
4
Press
memory.
or
search the
Press Black Start or
Color Start.
Brother Accessories & Supplies:
Making copies
Single copy
In USA: 1-888-879-3232 (voice)
1-800-947-1445 (fax)
In Canada: 1-877-BROTHER (voice)
1
Press
(Copy) to
illuminate it in green.
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
xiv
Download from Www.Somanuals.com. All Manuals Search And Download.
xv
Download from Www.Somanuals.com. All Manuals Search And Download.
xvi
Download from Www.Somanuals.com. All Manuals Search And Download.
xvii
Download from Www.Somanuals.com. All Manuals Search And Download.
xviii
Download from Www.Somanuals.com. All Manuals Search And Download.
18
xix
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
Using this Guide
Thank you for buying a Brother fax machine or Multi-Function Center
(MFC). Your machine is simple to use, with LCD screen instructions
to guide you through programming it. You can make the most of your
machine by viewing through this Guide.
Finding information
All the chapter headings and subheadings are listed in the Table of
Contents. You will be able to find information about a specific feature
or operation by checking the Index at the back of this Guide.
Symbols used in this Guide
Throughout this Guide you’ll see special symbols alerting you to
important warnings, notes and actions. To make things clearer and
to help you press the correct keys, we used special fonts and added
some of the messages that will appear in the LCD.
Bold
Bold typeface identifies specific keys on the
machine control panel.
Italics
Italicized typeface emphasizes an important point
or refers you to a related topic.
Courier New Courier New type face identifies the messages on
the LCD of the machine.
Warnings inform you what to do to avoid possible personal
injury.
Cautions specify procedures you must follow or avoid to
prevent possible damage to the machine.
Notes tell you how you should respond to a situation that may
arise or give tips about how the current operation works with
other features.
Improper Setup alerts you to devices and operations that are not
compatible with the machine.
INTRODUCTION 1 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax Test Sheet and Product Registration
(USA only)
After setting your Station ID, please fill in the Test Sheet included
with your machine and fax it to Brother’s Automated Fax Response
System as your first transmission. This will check that your machine
is working properly.
To get a response, you must have set up your Station ID.
In USA Only: 1-877-268-9575
When your Test Sheet is received, a Confirmation Sheet and
Product Registration form will be sent back to your machine.
Please fill in the form and return it to complete your registration.
On-Line Registration (USA and Canada)
1
2
Insert the MFL-Pro Suite CD-ROM into your CD-ROM drive.
Click Online Registration to register your product.
1 - 2 INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch keys
Fax and telephone keys:
Redial/Pause
1
2
6
These 4 keys (MFC-3320CN only)
or 2 keys (FAX-1920CN only) give
you instant access to 8
(MFC-3320CN only) or 4
(FAX-1920CN only) previously
stored dial numbers.
Redials the last number you called.
It also inserts a pause in auto dial
numbers.
Hook
Press before dialing if you want to
make sure a fax machine answers,
andthen pressBlack Start or Color
Start.
Hold (FAX-1920CN only)
Lets you place telephone calls on
hold.
Shift
To access memory locations 5
through 8 (MFC-3320CN only) or 3
and 4 (FAX-1920CN only) in the
One-Touch keys, hold down the
Shift key.
Photo key:
PhotoCapture
3
4
Fax Resolution
Sets the resolutionwhen yousend a
fax.
Lets you access the PhotoCapture
Center.
Dial Pad
7
Message Center keys
(FAX-1920CN only)
Use these keys to dial telephone
and fax numbers and as a keyboard
for entering information into the
machine.
MC On/Off
Let’s you activate the Message
Center and blinks if you did not play
your voice messages.
The # key lets you temporarily
switch the dialing mode during a
telephone call from Pulse to Tone.
Play/Record
Lets you listen to voice messages
stored in memory. Also, lets you
record telephone calls.
8
9
Stop/Exit
Stops an operation or exits from the
menu.
Erase
Lets you delete voice messages, all
fax messages or all messages.
Black Start
Lets you start sending faxes or
making copies in black and white.
Copy keys
5
(Temporary settings):
Also for MFC-3320CN, lets you start
a scanning operation. (Color or
mono are depending on scanning
setting on your PC)
Options
You can quickly and easily select
temporary settings for copying.
Quality
Use this key to temporarily change
the quality for Copying.
1 - 4 INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode keys:
B
Color Start
Fax
Lets you start sending faxes or
making copies in full color.
Lets you access Fax mode.
Also for MFC-3320CN, lets you start
a scanning operation. (Color or
mono, depending on the scanning
setting on your PC)
Copy
Lets you access Copy mode.
On/Off
0
A
Scan
You can turn the machine on or off.
(MFC-3320CN only)
Lets you access Scan mode.
Navigation keys:
Menu/Set
Liquid Crystal Display (LCD)
C
D
Lets you access the Menu to
program and store your settings in
the machine.
Displays messageson the screen to
help you set up and use your
machine.
Volume
Ink/Reports (FAX-1920CN only)
When using the speaker or during
ringing in fax mode, you can press
these keys to adjust the volume.
Lets you clean the print heads,
replace an ink cartridge and check
the available ink volume.
For fax model, you can adjust the
handset volume too.
—OR—
Lets you access the Reports menu
by pressing it with the Shift key.
Search/Speed Dial
Ink (MFC-3320CN only)
Lets you look up numbers that are
stored in the dialing memory. It also
lets you dial stored numbers by
pressing # and a two-digit number.
Lets you clean the print heads,
replace an ink cartridge and check
the available ink volume.
Press to scroll backward to a menu
selection.
or
Press to scroll through the menus
and options.
Also, you can use these keys to do
a numerical search for the names of
stored numbers in fax mode.
INTRODUCTION 1 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the machine on and off
When the machine is idle, you can turn it on and off by pressing the
On/Off key. In OFF mode, no machine operations will be available.
Even if you turned the machine off, it will periodically clean the print
head to preserve print quality.
Turning the machine off
Press and hold down the On/Off key
until the LCD shows:
Shutting Down
The LCD light will go off.
Turning the machine on
Press and hold down the On/Off key
until the LCD shows:
Please Wait
The LCD will show the date and time (Fax mode).
Even in OFF mode, you can receive fax and telephone calls by
customizing the On/Off key as explained below. (See On/Off
Setting on page 4-12.)
On/Off Setting
Fax Receive:Off
—
No machine operations will be
available.
(default)
Fax Receive:On Fax Only
Fax/Tel
Fax Receive, Easy Receive, Delayed
Fax, Remote Fax Options, Remote
Retrieval.
(FAX-1920CN
only)
External TAD
(MFC-3320CN
only)
MC: Msg Ctr
(FAX-1920CN
only)
■
You cannot receive a fax with
Black Start or Color Start.
Delayed Fax and Remote Fax
Options should be set before you
switch off the machine.
■
Manual
Delayed Fax, Easy Receive
Fax/Tel
(MFC-3320CN
only)
■
You cannot receive a fax with
Black Start or Color Start.
Delayed Fax and Remote Fax
Options should be set before you
switch off the machine.
■
■
You can not receive a fax
automatically even if you have set
the receive mode to Fax/Tel.
1 - 6 INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
About fax machines
Custom features
Do you have Voice Mail on the phone line?
If you have Voice Mail on the phone line where you will install your
new machine, there is a strong possibility that Voice Mail and the
machine may conflict with each other while receiving incoming calls.
Why should there be problems?
Since both the machine and Voice Mail will pick up the call, after the
number of rings you have set, each of them has the ability to keep
the other from receiving calls.
For example, if your Voice Mail is set to answer after two rings and
your machine is set to answer after four, your Voice Mail will stop
your machine from receiving faxes.
If you set Voice Mail and the Brother machine to answer after the
same number of rings, there is no way of knowing which one will
answer first. It is important to remember that neither Voice Mail nor
the machine can pass the call back to the other after the call has
been answered.
How can you avoid possible problems?
A very good way to avoid problems like the one mentioned, is to get
a second phone number on your present phone line.
Many people with Voice Mail choose an alternative service, which is
called “Distinctive Ring”, and they are very satisfied with it. (See
Another way to avoid possible problems is to replace your Voice Mail
with an answering machine. Your Brother machine is designed to
work with an answering machine or TAD (telephone answering
device).
INTRODUCTION 1 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax tones and handshake
When someone is sending a fax, the machine sends fax calling tones
(CNG tones). These are quiet, intermittent beeps every 4-seconds.
You’ll hear them after you dial and press Black Start or Color
Start and they will continue for about 60 seconds after dialing.
During that time, the sending machine must begin the “handshake”,
or connection, with the receiving machine.
Each time you use automatic procedures to send a fax, you are
sending CNG tones over the phone line. You’ll soon learn to listen for
these quiet beeps each time you answer a phone on your fax line, so
you will know if you are receiving a fax message.
The receiving fax responds with fax receiving tones, which are loud,
chirping sounds. A receiving fax chirps for about 40 seconds over the
phone line, and the LCD shows Receiving.
If your machine is set to the Fax Onlymode, it will answer every call
automatically with fax receiving tones. If the other person hangs up,
your machine will continue to send the “chirps” for about 40 seconds,
and the LCD continues to show Receiving. To cancel receiving,
press Stop/Exit.
The fax ‘handshake’ is the time in which the sending machine’s CNG
tones and the receiving machine’s “chirps” overlap. This must be for
at least 2 to 4 seconds, so both machines can understand how each
is sending and receiving the fax. The handshake cannot begin until
the call is answered, and the CNG tones only last for about 60
seconds after the number is dialed. So it is important for the receiving
machine to answer the call in as few rings as possible.
When you have an external Telephone Answering Device (TAD)
on your fax line, your TAD will decide the number of rings before
the call is answered.
Pay special attention to the directions for connecting a TAD in
1 - 8 INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
ECM (Error Correction Mode)
The Error Correction Mode (ECM) is a way for the machine to check
a fax transmission while it is in progress. If the machine detects
errors during fax transmission, it resends the pages of the fax that
had an error. ECM transmissions are only possible between fax
machines that both have this feature. If they do, you may send and
receive fax messages that are continuously being checked by the
machine.
Your machine must have enough memory for this feature to work.
Connecting the machine
Connecting an external telephone
If your machine does not have a handset, you can connect a
separate telephone (or telephone answering device) directly to your
machine as shown in the diagram below.
Connect the modular plug on the telephone line cord to the jack
labeled EXT. in the back of the machine.
Extension
Telephone
(MFC-3320CN)
External
Telephone
When this phone (or TAD) is in use, the LCD shows Telephone.
INTRODUCTION 1 - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an external telephone answering
device (TAD)
Sequence
You may choose to connect an answering device. However, when
you have an external TAD on the same telephone line as the
machine, the TAD answers all calls and the machine “listens” for fax
calling (CNG) tones. If it hears them, the machine takes over the call
and receives the fax. If it doesn’t hear CNG tones, the machine lets
the TAD continue playing your outgoing message so your caller can
leave you a voice message.
The TAD must answer within four rings (the recommended setting is
two rings). The machine cannot hear CNG tones until the TAD has
answered the call, and with four rings there are only 8 to 10 seconds
of CNG tones left for the fax “handshake”. Make sure you carefully
follow the instructions in this guide for recording your outgoing
message. We do not recommend using the toll saver feature on your
external answering machine if it exceeds five rings.
If you do not receive all your faxes, reduce the Ring Delay
setting on your external TAD.
If You Subscribe to your Telephone Company’s Distinctive Ring
Service:
You may connect an external TAD to a separate wall jack only
if you subscribe to your telephone company’s Distinctive Ring
service, have registered the distinctive ring pattern on your
machine, and use that number as a fax number. The
recommended setting is at least four rings on the external TAD
when you have the telephone company’s Distinctive Ring
Service. You cannot use the Toll Saver setting.
If You Do Not Subscribe to Distinctive Ring Service:
You must plug your TAD into the EXT. jack of your machine. If
your TAD is plugged into a wall jack, both your machine and the
TAD will try to control the phone line. (See illustration below.)
1 - 10 INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Unless you are using Distinctive Ring, do not connect a
TAD elsewhere on the same phone line.
TAD
(MFC-3320CN)
TAD
When the TAD is in use, the LCD shows Telephone.
Connections
The external TAD must be plugged into the back of the machine, into
the jack labeled EXT. Your machine cannot work properly if you plug
the TAD into a wall jack (unless you are using Distinctive Ring).
1
Plug the telephone line cord from the telephone wall jack into the
back of the machine, in the jack labeled LINE.
2
Plug the telephone line cord from your external TAD into the
back of the machine, in the jack labeled EXT. (Make sure this
cord is connected to the TAD at the TAD’s telephone line jack,
and not its telephone jack.)
3
Set your external TAD to four rings or less. (The machine’s Ring
Delay setting does not apply.)
4
5
6
Record the outgoing message on your external TAD.
Set the TAD to answer calls.
For MFC-3320CN, set the Receive Mode to External TAD.
5-1.)
INTRODUCTION 1 - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording outgoing message (OGM) on an external TAD
Timing is important in recording this message. The message sets up
the ways to handle both manual and automatic fax reception.
1
Record 5 seconds of silence at the beginning of your message.
(This allows your machine time to listen for the fax CNG tones
of automatic transmissions before they stop.)
2
3
Limit your speaking to 20 seconds.
End your 20-second message by giving your Fax Receive Code
for people sending manual faxes. For example:
“After the beep, leave a message or send a fax by pressing
51 and Start.”
We recommend beginning your OGM with an initial 5-second
silence because the machine cannot hear fax tones over a
resonant or loud voice. You may try omitting this pause, but if your
machine has trouble receiving, then you must re-record the OGM
to include it.
1 - 12 INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Special line considerations
Roll over phone lines
A roll over phone system is a group of two or more separate
telephone lines that pass incoming calls to each other if they are
busy. The calls are usually passed down or “rolled over” to the next
available phone line in a preset order.
Your machine can work in a roll over system as long as it is the last
number in the sequence, so the call cannot roll away. Do not put the
machine on any of the other numbers; when the other lines are busy
and a second fax call is received, the fax call would be transferred to
a line that does not have a fax machine. Your machine will work
best on a dedicated line.
Two-line phone system
A two-line phone system is nothing more than two separate phone
numbers on the same wall outlet. The two phone numbers can be on
separate jacks (RJ11) or combined into one jack (RJ14). Your
machine must be plugged into an RJ11 jack. RJ11 and RJ14 jacks
may be equal in size and appearance and both may contain four
wires (black, red, green, yellow). To test the type of jack, plug in a
two-line phone and see if it can access both lines. If it can, you must
INTRODUCTION 1 - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Converting telephone wall outlets
There are three ways to convert to an RJ11 jack. The first two ways
may require assistance from the telephone company. You can
change the wall outlets from one RJ14 jack to two RJ11 jacks. Or,
you can have an RJ11 wall outlet installed and slave or jump one of
the phone numbers to it.
The third way is the easiest: Buy a triplex adapter. You can plug a
triplex adapter into an RJ14 outlet. It separates the wires into two
separate RJ11 jacks (Line 1, Line 2) and a third RJ14 jack (Lines 1
and 2). If your machine is on Line 1, plug the machine into L1 of the
triplex adapter. If your machine is on Line 2, plug it into L2 of the triple
adapter.
Triplex Adapter
RJ14
RJ11
RJ14
1 - 14 INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing machine, external two-line TAD and two-line
telephone
When you are installing an external two-line telephone answering
device (TAD) and a two-line telephone, your machine must be
isolated on one line at both the wall jack and at the TAD. The most
common connection is to put the machine on Line 2, which is
explained in the following steps. The back of the two-line TAD must
have two telephone jacks: one labeled L1 or L1/L2, and the other
labeled L2. You will need at least three telephone line cords, the one
that came with your machine and two for your external two-line TAD.
You will need a fourth line cord if you add a two-line telephone.
1
Place the two-line TAD and the two-line telephone next to your
machine.
2
Plug one end of the telephone line cord for your machine into the
L2 jack of the triplex adapter. Plug the other end into the LINE
jack on the back of the machine.
3
4
Plug one end of the first telephone line cord for your TAD into
the L1 jack of the triplex adapter. Plug the other end into the L1
or L1/L2 jack of the two-line TAD.
Plug one end of the second telephone line cord for your TAD
into the L2 jack of the two-line TAD. Plug the other end into the
EXT. jack on the left side of the machine.
Triplex Adapter
Two Line Phone
External Two Line TAD
machine
You can keep two-line telephones on other wall outlets as always.
There are two ways to add a two-line telephone to the machine’s wall
outlet. You can plug the telephone line cord from the two-line
telephone into the L1+L2 jack of the triplex adapter. Or, you can plug
the two-line telephone into the TEL jack of the two-line TAD.
INTRODUCTION 1 - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-line connections (PBX)
Most offices use a central telephone system. While it is often
relatively simple to connect the machine to a key system or a PBX
(Private Branch Exchange), we suggest that you contact the
company that installed your telephone system and ask them to
connect the machine for you. It is advisable to have a separate line
for the machine. You can then leave the Receive Mode set to Fax
Only to receive faxes any time of the day or night.
If the machine is to be connected to a multi-line system, ask your
installer to connect the unit to the last line on the system. This
prevents the unit from being activated each time a telephone call is
received.
If you are installing the machine to work with a PBX
1
It is not guaranteed that the unit will operate properly under all
circumstances with a PBX. Any cases of difficulty should be
reported first to the company that handles your PBX.
2
If all incoming calls will be answered by a switchboard operator,
it is recommended that the Receive Mode be set to Manual. All
incoming calls should initially be regarded as telephone calls.
Custom features on your phone line
If you have Call Waiting/Caller ID with the MFC-3320CN, or Call
Waiting, Voice Mail, RingMaster, an answering service, an alarm
system or other custom feature on one phone line it may create a
1 - 16 INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading originals and paper
2
Load originals
You can copy and scan from the ADF (automatic document feeder).
Using the automatic document feeder (ADF)
■ Originals must be between 3.5 and 8.5 inches wide and 5 and 14
inches long.
■ Make sure you place the originals face down, top edge first.
■ Adjust the paper guides to fit the width of your original.
Recommended environment
Temperature:
Humidity:
Paper:
68° F - 86° F
50% - 70%
20 lb LTR
Originals are Face Down
in the ADF
Paper Guides
LOADING ORIGINALS AND PAPER 2 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
■ The automatic document feeder (ADF) can hold up to 20 pages,
feeding each one individually through the machine. Use standard
(20 lb) paper when using the ADF.
Fan the paper, and then stagger the pages in the ADF as shown:
Approx. 1/2 inch
DO NOT use curled, wrinkled, folded, or ripped paper, or paper
with staples, paper clips, paste or tape attached. DO NOT use
cardboard, newspaper or fabric.
Make sure originals written with ink are completely dry.
DO NOT pull on the original while it is in progress.
2 - 2 LOADING ORIGINALS AND PAPER
Download from Www.Somanuals.com. All Manuals Search And Download.
About paper
The print quality of your original can be affected by the kind of paper
you use in the machine.
To get the best print quality for the settings you’ve chosen, always
set the Paper Type to match the type of paper you load.
You can use plain paper, inkjet paper (coated paper), glossy paper,
transparencies and envelopes.
We recommend testing various paper types before purchasing large
quantities.
For best results, use the recommended paper.
When you print on inkjet paper (coated paper), transparencies
and glossy paper, be sure to select the proper media in the
“Basic” tab in the printer driver.
Also avoid stacking by removing each page after it exits the
machine to avoid smudging.
Handling and using special paper
■ Store paper in its original packaging, and keep it sealed. Keep the
paper flat and away from moisture, direct sunlight and heat.
■ The coated side of glossy paper is shiny. Avoid touching the
shiny (coated) side. Load glossy paper with the shiny side facing
up toward you.
■ Avoid touching either side of transparencies, because they
absorb water and perspiration easily, and this may cause
decreased output quality. Transparencies designed for laser
printers/copiers may stain your next original. Use only
transparencies recommended for ink jet printing.
Recommended paper
The output quality depends on the paper type and paper brand.
recommendations for paper that can be used with your
machine.
LOADING ORIGINALS AND PAPER 2 - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper capacity of the paper tray
Paper Type
Plain Paper
(Cut Sheet)
Paper Size
Number of sheets
Letter, Executive,
A5, A6, B5 (JIS)
100 of 20 lb
up to 0.39 in.
Legal
Letter
Letter
Letter
50 of 20 lb
Inkjet Paper
Glossy Paper
Transparencies
Envelopes
20
20
10
10
DL, COM-10, C5,
Monarch, JE4
Photo Card
Index Card
4" x 6", L (3.5" x 5"), 30
2L (5" x 7"
)
5" x 8"
30
* You can copy only on Letter, Legal and Photo Card (4"(W) x 6"(H))
paper.
* You can receive faxes only on Letter or Legal paper.
Paper specifications for the paper tray
Cut Sheet Paper Plain Paper: 17 to 32 lb
Weight
Inkjet Paper: 17 to 53 lb
Glossy Paper: Up to 58 lb
Index card: Up to 32 lb
Thickness
Plain Paper: 0.003 to 0.006 in.
Inkjet Paper: 0.003 to 0.01 in.
Glossy Paper: Up to 0.01 in.
Envelopes: Up to 0.02 in.
Photo Card: Up to 0.017 in.
Index card: Up to 0.006 in.
2 - 4 LOADING ORIGINALS AND PAPER
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper capacity of the output paper support
Output Paper
Support
Up to 50 sheets of 20 lb (Letter)
■ Transparencies and glossy paper must be
picked up from the output paper support one
page at a time to avoid smudging.
■ Legal cannot be stacked on the output paper
support.
Do not use paper or envelopes:
■ that are damaged, curled, wrinkled, or irregularly shaped
0.04 in.
or longer
0.04 in.
or longer
■ that are extremely shiny or highly textured
■ that were previously printed by a printer
■ that cannot be arranged uniformly when stacked
■ that are made with a short grain
Do not use envelopes:
■ that are of a baggy construction
■ that are embossed (have raised writing on them)
■ that have clasps on them
■ that are not sharply creased
■ that are preprinted on the inside
LOADING ORIGINALS AND PAPER 2 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Printable area
The printable area depends on the settings in the application you are
using. The figures below show the unprintable areas on cut sheet
paper and envelopes.
Cut Sheet Paper
Envelopes
3
4
3
4
1
1
2
2
■ unprintable area
Paper
Paper Size
1Top
2
Bottom 3Left
4Right
0.23 in.
0.12 in.
0.23 in.
0.12 in.
Cut Sheet Letter,
Legal
Fax
0.12 in.
0.12 in.
0.12 in.
0.12 in.
0.47 in.
0.12 in.
0.12 in.
0.12 in.
0.23 in.
0.12 in.
0.23 in.
0.12 in.
Copy
Printer
Printer
A5, A6,
JIS_B5
Executive
Photo
Card
4" x 6"
Printer
Copy
0.12 in.
0.12 in.
0.12 in.
0.12 in.
0.12 in.
0.12 in.
0.12 in.
0.12 in.
0.12 in.
0.12 in.
0.12 in.
0.12 in.
L (3.5" x 5"), Printer
2L (5" x 7")
Index Card 5" × 8"
Envelopes DL,C5,
Printer
Printer
0.12 in.
0.39 in.
0.12 in.
0.79 in.
0.12 in.
0.12 in.
0.12 in.
0.12 in.
COM10,
Monarch,
JE4
,
Printable area depends on the Printer driver settings.
The figures above are approximate and the printable area may
vary depending on the type of cut sheet paper you are using.
2 - 6 LOADING ORIGINALS AND PAPER
Download from Www.Somanuals.com. All Manuals Search And Download.
How to load paper and envelopes
To load paper or other media
1
Fan the stack of paper well to avoid paper jams and mis-feeds.
2
Unfold the paper support, and press and slide the paper guide
to fit the paper width.
Paper Support
Paper Guide
3
Gently insert the paper.
Make sure the print side is towards you and the paper is below
the maximum paper mark.
Maximum Paper Mark
Print Side
Paper
LOADING ORIGINALS AND PAPER 2 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
To load glossy paper
1
2
Fan the stack of glossy paper well.
Put a sheet of plain paper in the paper tray first, and then put the
stack of glossy paper on top of it.
If the glossy sheets are ‘double-feeding’, put one sheet in the
paper tray at a time.
To load envelopes
1
Before loading, press the corners and sides of the envelopes to
make them as flat as possible.
If the envelopes are ‘double-feeding’, put one envelope in the
paper tray at a time.
2
Press and slide the paper guide to fit the width of the envelopes.
Insert them into the paper tray with the address side toward you
and pointed in the direction below.
Maximum Paper Mark
Print Side
2 - 8 LOADING ORIGINALS AND PAPER
Download from Www.Somanuals.com. All Manuals Search And Download.
On-screen programming
3
User-friendly programming
Your machine is designed to be easy to use with LCD on-screen
programming using the navigation keys. User-friendly programming
helps you take full advantage of all the menu selections your
machine has to offer.
Since your programming is done on the LCD, we have created
step-by-step on-screen instructions to help you program your
machine. All you need to do is follow the instructions as they guide
you through the menu selections and programming options.
Menu table
You can probably program your machine without the User’s Guide if
help you understand the menu selections and options that are found
in the machine’s programs.
You can program your machine by pressing Menu/Set,
followed by the menu numbers.
For example to set Fax Resolutionto Fine:
Press Menu/Set, 2, 2, 2 and
Press Menu/Set.
or
to select Fine.
Memory storage
If there is a power failure, you will not lose your menu settings
because they are stored permanently. Temporary settings (such as
Contrast, Overseas Mode, and so on) will be lost. You may also have
to reset the date and time.
ON-SCREEN PROGRAMMING 3 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation keys
*Access the menu
*Go to the next menu level
*Accept an option
*Scroll through the current
menu level
*Go back to the previous
menu level
*Exit the menu
You can access the menu mode by pressing Menu/Set.
When you enter the menu, the LCD scrolls.
Press 1 for General Setup menu
1.General Setup
—OR—
Press 2 for Fax menu
—OR—
2.Fax
Press 3 for Copy menu
3.Copy
Press 0 for Initial Setup
0.Initial Setup
You can scroll more quickly through each menu level by pressing the
arrow for the direction you want: or
.
Then set an option by pressing Menu/Set when that option appears
on the LCD.
The LCD will then show the next menu level.
Press
Press Menu/Set.
When you finish setting an option, the LCD shows Accepted.
Use to scroll backward if you passed your choices or want
to save keystrokes.
or
to scroll to your next menu selection.
3 - 2 ON-SCREEN PROGRAMMING
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
1.General
1.Mode Timer
—
5 Mins
Sets the time to
Setup
return to Fax mode.
2 Mins
1 Min
30 Secs
(MFC-3320CN)
0 Sec
(FAX-1920CN)
Off
2.Paper Type
—
Plain
Sets the type of
paper in the paper
tray.
Inkjet
Glossy
(4-Coloror
3-Color)
Transprncy
3.Paper Size
4.Volume
—
Letter
Legal
Sets the size of the
paper in the paper
tray.
1.Ring
High
Med
Low
Off
Adjusts the ring
volume.
2.Beeper
High
Med
Low
Off
Adjusts the volume
level of the beeper.
3.Speaker
High
Med
Low
Off
Adjusts the speaker
volume.
4.Handset
(FAX-1920CN
only)
High
Adjusts handset
volume.
Low
5.Volume
Amplify
(FAX-1920CN
only)
On
For the
hearing-impaired,
you can set the
volume to the VOL
AMPLIFY:ONsetting
on a permanent or
temporary basis.
(Permanent/
Temporary)
Off
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
ON-SCREEN PROGRAMMING 3 - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
1.General
Setup
5.Auto
Daylight
—
On
Savings Time
Off
(Continued)
automatically.
6.On/Off
—
Fax Receive: Customizes the
Setting
On/Off key to receive
faxes even in OFF
mode.
On
Off
2.Fax
1.Setup
Receive
(In Fax mode
only)
1.Ring Delay 04
Sets the number of
rings before the
machine answers in
Fax or Fax/Tel mode.
(MFC-3320CN
only)
03
02
01
00
2.Ring Delay Ring Delay
Sets the number of
rings before the
machine answers in
Fax or Fax/Tel mode.
(FAX-1920CN
only)
04
03
02
01
00
Toll Saver
The machine rings
two extra times if
there are no
messages to get, so
you can hang up and
not pay for the call.
On
Off
2.F/T Ring
Time
70 Sec
40 Sec
30 Sec
20 Sec
Sets the
pseudo/double-ring
time in Fax/Tel
mode.
3.Easy
Receive
On
Semi
(FAX-1920CN
only)
Off
Receives fax
messages without
pressing the Black
Start or Color Start
key.
4.Remote
Code
On
You can answer all
calls at an extension
or external phone
and use codes to turn
the machine on or off.
You can personalize
these codes.
(
Off
51, #51)
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
3 - 4 ON-SCREEN PROGRAMMING
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
2.Fax
(Continued)
1.Setup
Receive
(In Fax mode
only)
5.Auto
Reduction
On
Reduces the size of
incoming faxes.
Off
6.Polling RX
Sets up your
machine to poll
another fax machine.
2.Setup Send 1.Contrast
Auto
Light
Dark
Changes the
lightnessordarkness
of faxes you send.
(In Fax mode
only)
2.Fax
Resolution
Standard
Fine
Sets the default
resolution for
outgoing faxes.
S.Fine
Photo
3.Delayed
Fax
—
24 hour format that
the delayed faxes will
be sent.
4.Batch TX
On
Combines delayed
faxes to the same fax
number at the same
time of day into one
transmission.
Off
5.Real Time
TX
Off
You can send a fax
without using the
memory.
On
Next Fax Only
6.Polled TX
On
Sets up your
machine with an
original to be
Off
retrieved by another
fax machine.
7.Overseas
Mode
On
Adjusts for overseas
transmissions, which
can sometimes
Off
cause problems.
3.Set Quick- 1.One-Touch
Stores One-Touch
Dial numbers, so you
can dial by pressing
one key (and Start).
Dial
Dial
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
ON-SCREEN PROGRAMMING 3 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
2.Fax
(Continued)
3.SetQuick-
Dial
(Continued)
2.Speed-Dial
—
—
Stores Speed-Dial
numbers, so you can
dial by pressing only
a few keys (and
Start).
3.Setup
Groups
Sets up a Group
number for
Broadcasting.
4.Report
Setting
1
.
Transmission On
Initial setup for
Transmission
Verification Report
and Fax Journal
Report.
On+Image
Off
Off+Image
2.Journal
Period
Every 7 Days
Every 2 Days
Every 24 Hours
Every 12 Hours
Every 6 Hours
Every 50 Faxes
Interval:
Off
5.Remote Fax
Opt
1.Fax
Fwd/Paging
Off
Sets the machine to
or to call your pager.
Fax Forward
Paging
2.Fax
Storage
On
Stores incoming
faxes in the memory
so you can retrieve
them while you are
away from your
machine.
Off
3.Remote
Access
---
—
—
You must set your
own code for Remote
Retrieval.
4.Print Fax
(Backup Print)
stored in the
memory.
6.Remaining
Jobs
—
Checks which jobs
are in the memory or
cancels a delayed
fax or polling job.
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
3 - 6 ON-SCREEN PROGRAMMING
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
2.Fax
(Continued)
7.Setup MSG
CTR
1.OGM
MSG CTR OGM
F/T OGM
the outgoing
message.
(FAX-1920CN
only)
2.ICM Max.
Time
180 Sec
120 Sec
60 Sec
30 Sec
Select the maximum
length of incoming
messages.
3.ICM
Rec.Monitr
On
Adjusts the speaker
volume for voice
messages as they
come in.
Off
0.Miscellaneous
1.Distinctive
Off
Uses the Telephone
Company’s
Set (On)
Distinctive Ring
subscriber service to
register the ring
pattern with the
machine.
2.Caller ID
Display #
View or print a list of
the last 30 Caller IDs
stored in the
Print Report
memory.
3.Call
On
Off
Lets you use the
Waiting ID
(FAX-1920CN
only)
telephonecompany’s
Call Wating/Caller ID
subscriber service.
3.Copy
1.Quality
Best
Selects the Copy
resolution for your
type of original.
Normal
Fast
2.Brightness
—
-
-
-
-
-
+
+
+
+
+
Adjusts the
brightness.
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
ON-SCREEN PROGRAMMING 3 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
3.Copy
(Continued)
3.Contrast
—
-
-
-
-
-
+
+
+
+
+
Adjusts the contrast
for copies.
4.Color
Adjust
1.Red
2.Green
3.Blue
R:-
R:-
R:-
R:-
R:-
+
Adjusts the amount
of Red in copies.
+
+
+
+
G:-
G:-
G:-
G:-
G:-
+
+
+
+
+
Adjusts the amount
of Green in copies.
B:-
B:-
B:-
B:-
B:-
+
+
+
+
+
Adjusts the amount
of Blue in copies.
4
.
PhotoCapture 1.Print
—
—
Normal
Fine
Photo
Selects the print
quality.
(MFC-3320CN
only)
Quality
2.Paper & Size
Letter Glossy
4" x 6" Glossy
Letter Plain
Selects the paper
and print size.
Letter Inkjet
4" x 6" Inkjet
3.Brightness
4.Contrast
—
—
-
-
-
-
-
+
+
+
+
+
Adjusts the
brightness.
-
-
-
-
-
+
+
+
+
+
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
3 - 8 ON-SCREEN PROGRAMMING
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
4
.
PhotoCapture 5.True2Life
True2Life:On
True2Life:Off
1.White
Balance
white areas.
(MFC-3320CN
only)
(Continued)
-
-
-
-
-
+
+
+
+
+
2.Sharpness
Enhances the detail
of the image.
-
-
-
-
-
+
+
+
+
+
3.Color
Density
Adjusts the total
amount of color in the
image.
-
-
-
-
-
+
+
+
+
+
6.Cropping
Cropping:On
Lets your photos fit
inside page without
any space.
2-23*1
Cropping:Off
7.Scan to Card 1.Quality
B/W 200 x 100 dpi Selects the Scan
resolution for your
type of original.
B/W 200 dpi
Color 150 dpi
Color 300 dpi
Color 600 dpi
2.B/W File
Type
TIFF
Selects the default
file format for black
and white scanning.
2-23*1
2-23*1
PDF
3.ColorFile
Type
PDF
JPEG
Selects the default
file format for color
scanning.
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
ON-SCREEN PROGRAMMING 3 - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
4.LAN
(FAX-1920CN
only)
1.Setup
TCP/IP
1.
BOOT Method Auto
You can choose the
BOOT method that
best suits you needs.
Static
RARP
5.LAN
(MFC-3320CN
only)
BOOTP
DHCP
2.IP Address [000-255].
[000-255].
Enter the IP address.
[000-255].
[000-255]
3
.
Subnet Mask [000-255].
Enter the Subnet
mask.
See
[000-255].
[000-255].
[000-255]
Network
User’s
Guide
on the
CD-ROM
4.Gateway
[000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Host Name
BRN_XXXXXX
Enter the Host name.
6.
WINS Config Auto
You can choose the
WINS configuration
mode.
Static
7.WINS
Server
(Primary)
Specifies the IP
000.000.000.000 address of the
primary or secondary
server.
8.DNS Server (Primary)
Specifies the IP
000.000.000.000 address of the
primary or secondary
server.
9.APIPA
On
Automatically
allocates the IP
address from the
link-local address
range.
Off
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
3 - 10 ON-SCREEN PROGRAMMING
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
4.LAN
(FAX-1920CN
2.Setup
Internet
1.Mail
Address
(60 characters) Enter the mail
address.
only)
2
.
SMTP Server [000-255].[000- Enter the SMTP
5.LAN
(MFC-3320CN
only)
255].[000-255]. server address.
[000-255]
3
.
POP3 Server [000-255].[000- Enter the POP3
255].[000-255]. server address.
[000-255]
See
Network
User’s
Guide
on the
CD-ROM
4.Mailbox
Name
(up to 20
characters)
Enter the mail box
name.
5
.Mailbox Pwd Password:****** Enter the password
to login to the POP3
server.
3.Setup Mail 1.Auto
On
Off
Automatically checks
the POP3 server for
new messages.
RX
Polling
2.Poll
Frequency
10 Min
Sets the interval for
checking for new
messages on the
POP3 server.
3.Header
All
Selects the contents
of the mail header to
be printed.
Subject+From+To
None
4.Del Error
Mail
On
Deletes error mails
automatically.
Off
5.Notification
On
Sends notification
messages.
MDN
Off
4.Setup Mail 1.Sender
TX Subject
—
Displays the subject
that is attached to the
Internet Fax data.
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
ON-SCREEN PROGRAMMING 3 - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
4.LAN
(FAX-1920CN
4.SetupMail
TX
2.Size Limit On
Off
Limits the size of
E-mail documents.
only)
(Continued)
3.Notification
On
Sends notification
messages.
5.LAN
(MFC-3320CN
only)
Off
5
.
Setup Relay 1.Rly
On
Relays a document
to another fax
machine.
(Continued)
Broadcast
Off
2.Relay
Domain
RelayXX:
Registers the
Domain name.
3.Relay
Report
On
Prints the Relay
Broadcast Report.
Off
6.Setup Misc. 1.Ethernet
Auto
Selects Ethernet link
mode.
See
Network
User’s
Guide
on the
CD-ROM
100B-FD
100B-HD
10B-FD
10B-HD
2.Time Zone
GMT-XX:XX
Sets the time zone
for your country.
7.Scan to
1.Quality
B/W 200 x 100 dpi Selects the scan
E-mail
quality.
B/W 200 dpi
Color 150 dpi
Color 300 dpi
Color 600 dpi
2.B&W File
Type
TIFF
PDF
Selects the B&W file
type.
3.ColorFile
Type
PDF
Selects the color file
type.
JPEG
5.Test Print
(FAX-1920CN
only)
6.Test Print
(MFC-3320CN
only)
You can print a test
sample page to
check the print
quality and adjust the
Vertical Alignment.
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
3 - 12 ON-SCREEN PROGRAMMING
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—OR—
to
to
accept
exit
Select & Set
Select & Set
Main Menu
Submenu
Menu
Selections
Options
Descriptions
Page
6.Print
Reports
(FAX-1920CN
only)
1.Help List
2.Quick-Dial
—
—
—
—
—
—
You can print these
lists and reports.
3.Fax
7.Print
Reports
Journal
4
.Transmission
—
—
(MFC-3320CN
only)
5.User
Settings
—
—
—
—
6.Network
Config
0.Initial
Setup
1.Receive
Mode
—
Fax Only
You can choose the
receive mode that
best suits your
needs.
Fax/Tel
External
TAD
(MFC-3320CN
only)
Manual
2.Date/Time
3.Station ID
4.Tone/Pulse
—
—
—
Puts the date and
time on the LCD and
in headings of faxes
you send.
Fax
Program your name
and fax number to
appear on each page
you fax.
Name
—
—
Tone
Selects the dialing
mode.
Pulse
0.Local
English
Allows you to change See
Language
the LCD Language
for your country.
Quick
Setup
Guide
French
(Canada only)
The factory settings are shown in Bold.
*1 See the complete Software User’s Guide on the CD-ROM.
ON-SCREEN PROGRAMMING 3 - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
s
Getting started
4
Initial Setup
Setting the Date and Time
Your machine displays the date and time and if you set up the Station
ID it prints on every fax you send. If there is a power failure, you may
have to reset the date and time. All other settings will not be affected.
1
2
Press Menu/Set, 0, 2.
Enter the last two digits of the year.
Press Menu/Set.
2.Date/Time
Year:20XX
3
4
5
6
Enter two digits for the month.
Press Menu/Set.
(For example, enter 09 for September, or 10 for October.)
Month:XX
Enter two digits for the day.
Day:XX
Press Menu/Set.
(For example, enter 06 for 6th.)
Enter the time in 24-Hour format.
Time:XX:XX
Press Menu/Set.
(For example, enter 15:25 for 3:25 P.M.)
Press Stop/Exit.
The LCD now shows the date and time whenever the machine
is in Fax mode.
4 - 1 GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Station ID
You should store your name or company name and fax number to be
printed on all fax pages that you send.
1
2
Press Menu/Set, 0, 3.
Enter your fax number (up to 20
digits).
3.Station ID
Fax:
Press Menu/Set.
You cannot enter a hyphen.
3
4
Use the dial pad to enter your name
(up to 20 characters).
Name:
Press Menu/Set.
Press Stop/Exit.
The LCD will go back standby mode automatically.
If the Station ID has already been programmed, the LCD will ask
you to press 1 to make a change or 2 to exit without changing.
GETTING STARTED 4 - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering text
When you are setting certain menu selections, such as the Station
ID, you may need to type text into the machine. Most number keys
have three or four letters printed above them. The keys for 0, # and
do not have printed letters because they are used for special
characters.
By pressing the appropriate number key repeatedly, you can access
the character you want.
Press Key
one time
two times
three times
four times
2
3
4
5
6
7
8
9
A
D
G
J
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
L
M
P
T
O
R
V
Y
W
Inserting spaces
To enter a space, press
between characters.
once between numbers and twice
Making corrections
If you entered a letter incorrectly and want to change it, press
move the cursor under the incorrect character. Then press
Stop/Exit. All letters above and to the right of the cursor will be
to
deleted. Re-enter the correct character. You can also back up and
type over incorrect letters.
Repeating letters
If you need to enter a character that is on the same key as the
previous character, press
you press the key again.
to move the cursor to the right before
4 - 3 GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
Special characters and symbols
or
the special character or symbol you want. Then press Menu/Set to
select it.
Press , # or 0, and then press
to move the cursor under
Press
for
for
for
(space) ! " # $ % & ’ ( )
: ; < = > ? @ [ ] ^ _
É À È Ê Î Ç Ë Ö 0
+ , - . /
Press #
Press 0
NOTICE (For USA)
The Telephone Consumer Protection Act of 1991 makes it unlawful
for any person to use a computer or electronic device to send any
message via a telephone fax machine unless such messages
clearly contain, in a margin at the top or bottom of each transmitted
page, or on the first page of the transmission, the date and time it
is sent and an identification of the business or other entity or other
individual sending the message and the telephone number of the
sending machines or such business, other entity or individual.
In order to program this information into your machine, complete
the steps described on page 4-2.
Setting Tone and Pulse dialing mode
1
2
Press Menu/Set, 0, 4.
4.Tone/Pulse
Press
or
to select Pulse
(or Tone).
Press Menu/Set.
Press Stop/Exit.
3
GETTING STARTED 4 - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Setup
Setting the Mode Timer (MFC-3320CN only)
The machine has three temporary mode keys on the control panel:
Fax, Copy and Scan. You can change the number of seconds or
minutes the machine takes after the last Copy or Scan operation
before it returns to Fax mode. If you select Off, the machine stays
in the mode you used last.
1
2
Press Menu/Set, 1, 1.
Press or to select
0 Sec, 30 Secs, 1 Min, 2 Mins, 5 Minsor Off.
1.Mode Timer
3
Press Menu/Set.
General Setup
Setting the Mode Timer (FAX-1920CN only)
The machine has two temporary mode keys on the control panel: Fax
and Copy. You can change the number of seconds or minutes the
machine takes after the last Copy operation before it returns to Fax
mode. If you select Off, the machine stays in the mode you used
last.
1
2
Press Menu/Set, 1, 1.
Press or to select
0 Sec, 30 Secs, 1 Min, 2 Mins, 5 Minsor Off.
1.Mode Timer
3
Press Menu/Set.
4 - 5 GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Paper Type
To get the best print quality, set the machine for the type of paper you
are using.
1
2
Press Menu/Set, 1, 2.
Press or to select Plain,
Inkjet, Glossyor Transprncy.
2.Paper Type
Press Menu/Set.
3
4
If you selected Glossy, press
Glossy:4-Coloror Glossy:3-Color.
or
to select
Press Menu/Set.
The print quality of black ink varies depending on the kind of
glossy paper you are using. Black ink is used when you select
Glossy:4-Color. If the glossy paper you are using repels the
black ink, select Glossy:3-Color, which simulates black ink
by combining the three ink colors.
Press Stop/Exit.
The machine ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies or glossy paper, remove each sheet immediately
to prevent smudging or paper jams.
Setting the Paper Size (FAX-1920CN only)
You can use two sizes of paper for printing your faxes and copies:
letter and legal. When you change the type of paper you load in the
machine, you will need to change the setting for Paper Size at the
same time so your machine can fit an incoming fax on the page.
1
2
Press Menu/Set, 1, 3.
Press or to select
Letteror Legal.
Press Menu/Set.
Press Stop/Exit.
3.Paper Size
3
For Copy Options, you can also change the paper size to photo
card size (4" × 6") for the next copy only.
GETTING STARTED 4 - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Paper Size (MFC-3320CN only)
You can use two sizes of paper for printing your faxes and copies:
letter and legal. When you change the type of paper you load in the
machine, you will need to change the setting for Paper Size at the
same time so your machine can fit an incoming fax on the page.
1
2
Press Menu/Set, 1, 3.
Press or to select
Letteror Legal.
Press Menu/Set.
Press Stop/Exit.
3.Paper Size
3
For PhotoCapture Center and Copy Options, you can also
change the paper size to photo card size (4" × 6") for the next
copy or printout only.
Setting the Ring Volume
You can adjust the ring volume when your machine is idle (not being
used). You can turn the ring Offor you can select the ring volume
level.
1
2
Press Menu/Set, 1, 4, 1.
Press or to select
(Low, Med, Highor Off).
1.Ring
Press Menu/Set.
3
Press Stop/Exit.
—OR—
In Fax mode, press
or
to adjust the volume level. Every time
you press these keys, the machine will ring so you can hear the
active setting as the LCD shows it. The volume changes with each
key press. The new setting will stay until you change it again.
4 - 7 GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Beeper Volume
You can change the beeper volume. The default (factory) setting is
Low. When the beeper is on, the machine beeps every time you
press a key or make a mistake and after a fax is sent or received.
1
2
Press Menu/Set, 1, 4, 2.
2.Beeper
Press
or
to select your
option.
(Low, Med, Highor Off)
Press Menu/Set.
3
Press Stop/Exit.
Setting the Speaker Volume
You can adjust the machine’s one-way speaker volume.
1
2
Press Menu/Set, 1, 4, 3.
Press or to select
(Low, Med, Highor Off).
3.Speaker
Press Menu/Set.
3
Press Stop/Exit.
—OR—
In Fax mode, you can adjust the speaker volume by pressing Hook,
and then selecting a speaker volume level.
Press or to adjust the volume level. The LCD shows the setting
you are choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.
GETTING STARTED 4 - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Handset Volume (FAX-1920CN only)
1
2
Press Menu/Set, 1, 4, 4.
Press to select Highor Low, and
then press Menu/Set.
4.Handset
3
Press Stop/Exit.
—OR—
You can adjust the handset volume any time you are talking on
the telephone. There are two handset volume levels, LOWand
HIGH. The default setting is LOW.
Press or
to adjust the volume level. The LCD shows the
setting you are choosing. The new setting will remain until you
change it again.
4 - 9 GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing the Handset Volume
(For Volume Amplify) (FAX-1920CN only)
Before you begin to use the machine, you must decide if you need to
set the handset volume to Vol Amplify:Onfor a user who is
hearing-impaired. The AMPLIFY volume level complies with FCC
standards.
Volume Amplify:Off
This default setting is appropriate if none of the users are
hearing-impaired. During a conversation, users can press Volume
or
on the control panel to adjust the volume to Lowor High.
When the handset is replaced, the handset volume will remain until
you change it again.
Volume Amplify:On—Temporary
This setting is appropriate if some of the users are hearing-impaired.
During a conversation, users can press Volume
or
on the
control panel to adjust the volume to Low, Highor Amplify. When
the handset is replaced, the handset volume returns to the default
setting of Low.
Volume Amplify:On—Permanent
Choose Vol Amplify:On—Permanentif all of the users are
hearing-impaired. During a conversation, users can press Volume
or
on the control panel to adjust the volume to Low, Highor
Amplify. When the handset is replaced, the handset volume
returns to the default setting of Amplify.
When you press Volume or
ton the control panel to adjust
the volume, the LCD shows the setting you are choosing. Each
key press changes the volume to the next setting.
WARNING
It is important that you do NOT choose Permanentunless ALL
the users are hearing-impaired. Otherwise, the default setting of
Amplifymay damage the hearing of some users.
GETTING STARTED 4 - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Volume Amplify (FAX-1920CN only)
before you do the following steps:
1
2
Press Menu/Set, 1, 4, 5.
If none of the users are
hearing-impaired, press
5.Volume Amplify
Vol Amplify: Off
or
to select Off, and then press Menu/Set and go to Step 4.
—OR—
If some or all of the users are hearing-impaired, select
On, and then press Menu/Set.
3
If all the users are hearing-impaired,
Permanent
press
or
to select
Permanent, and then press Menu/Set.
—OR—
If only some of the users are
hearing-impaired, select
Temporary
Temporary, and then press Menu/Set.
4
Press Stop/Exit.
Turning on Automatic Daylight Savings Time
You can set the machine to change automatically for Daylight
Savings Time. It will reset itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you have set the correct
day and time in the Date/Timesetting.
1
2
Press Menu/Set, 1, 5.
5.Auto Daylight
Press
or
to select On(or
Off).
Press Menu/Set.
Press Stop/Exit.
3
4 - 11 GETTING STARTED
Download from Www.Somanuals.com. All Manuals Search And Download.
On/Off Setting
You can customize the machine’s On/Off key. The default setting is
Off. Your machine will not work when it is switched Off, but it will
purge the ink head periodically. If you turn this setting to On, you can
receive faxes or calls even when the machine is switched Off.
1
2
Press Menu/Set, 1, 6.
6.On/Off Setting
Press
or
to select On(or
Off).
3
4
Press Menu/Set.
Press Stop/Exit.
GETTING STARTED 4 - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Receive
5
Basic receiving operations
Choosing the Receive Mode (MFC-3320CN only)
There are four different Receive Modes for your machine. You can
choose the mode that best suits your needs.
LCD
How it works
When to use it
Fax Only
The machine
For dedicated fax lines.
automatically answers
every call as a fax.
(automatic receive)
Fax/Tel*
(fax and telephone)
The machine controlsthe Use this mode if you expect to receive lots of fax
line and automatically messages and few telephone calls. You cannot
answers every call. If the have an answering machine on the same line, even
call is a fax it will receive if it is on a separate wall jack on the same line. You
the fax. If the call is not a cannot use the telephone company’s Voice Mail in
(with an external or
extension telephone)
fax it will ring
this mode.
(pseudo/double ring) for
you to pick up the call.
External TAD
The external answering
device (TAD)
automatically answers
every call.
Voice messages are
stored on the external
TAD. Fax messages are
printed.
Use this mode if you have connected an answering
machine on your phone line.
The TAD setting works only with an external
answering machine. Ring Delay and F/T Ring Time
do not work in this setting.
(with an external
answering device)
Manual
You control the phone
line and must answer
every call yourself.
Use this mode when you are using a computer
modem on the same line or if you don’t receive
many fax messages or with Distinctive Ring.
If you answer and hear fax tones, wait until the
machine takes over the call, then hang up.
(manual receive)
(with an external or
extension telephone or
with Distinctive Ring)
* In Fax/Telmode you must set the Ring Delay and F/T Ring Time.
5 - 1 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
To select or change your Receive Mode
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 0, 1.
1.Receive Mode
Press
or
to select
Fax Only, Fax/Tel, External TADor Manual.
Press Menu/Set.
4
Press Stop/Exit.
If you are changing the Receive Mode while in another
operation, the LCD will return to that operation.
Current Receive Mode
Fax: Fax Only
F/T: Fax/Tel
TAD: External TAD
Mnl: Manual
SETUP RECEIVE 5 - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing the Receive Mode (FAX-1920CN only)
There are four different Receive Modes for your machine. You can
LCD
How it works
When to use it
Fax Only
The machine
For dedicated fax lines.
automatically answers
every call as a fax.
(automatic receive)
Fax/Tel*
(fax and telephone)
The machine controlsthe Use this mode if you expect to receive lots of fax
line and automatically messages and few telephone calls. You cannot
answers every call. If the have an answering machine on the same line, even
call is a fax it will receive if it is on a separate wall jack (phone socket) on the
the fax. If the call is not a same line. You cannot use the telephone
fax it will ring
company’s Voice Mail in this mode.
(pseudo/double ring) for
you to pick up the call.
Manual
You control the phone
line and must answer
every call yourself.
Use this mode when you are using a computer
modem on the same line or if you don’t receive
many fax messages or with Distinctive Ring.
If you answer and hear fax tones, wait until the
machine takes over the call, then hang up. (See
(manual receive)
(with Distinctive Ring)
—OR—
Use this mode if an external phone or an external
TAD is connected on the same line. Make sure
MC:Msg. Ctr
The built-in digital
Message Center
answers voice calls. It
will record up to 99 voice
messages. Each
Use this mode to record voice messages in the
messages can be up to
maximum of 3
minutes.The total
recording time will vary
depending on the
memory available.
ON
* In Fax/Telmode you must set the Ring Delay and F/T Ring Time.
If you have extension phones on the line, keep the Ring Delay set to
4 rings.
5 - 3 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
To select or change your Receive Mode
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 0, 1.
1.Receive Mode
Press
or
to select Fax
Only, Fax/Tel, or Manual.
Press Menu/Set.
4
Press Stop/Exit.
If you are changing the Receive Mode while in another
operation, the LCD will return to that operation.
Current Receive Mode
Fax: Fax Only
F/T: Fax/Tel
Mnl: Manual
MC: Msg. Ctr
If the Message Center Mode is On, it
overrides your Receive Mode setting.
The screen shows MC:Msg Ctr.
Press and hold until it
lights.
If the Message Center Mode is Off, the
Receive Mode returns to your own
OFF
SETUP RECEIVE 5 - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Ring Delay
The Ring Delay sets the number of times the machine rings before it
answers in Fax Only, Fax/Teland MC:Msg Ctr(FAX-1920C
only) modes. If you have extension phones on the same line as the
machine or subscribe to the telephone company’s Distinctive Ring
service, keep the Ring Delay setting of 4.
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 1, 1.
1.Ring Delay
Press
or
to select Ring
Delay.
Press Menu/Set.
Press or
before the machine answers (00, 01, 02, 03 or 04).
4
5
to select how many times the line rings
Press Menu/Set.
(If you select 00, the line won’t ring at all.)
Press Stop/Exit.
5 - 5 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Toll Saver (FAX-1920CN Only)
When you set the toll saver feature, the machine answers after four
rings if you don’t have voice or fax messages and after two rings if
you do have voice or fax messages. This way, when you call the
machine for remote retrieval and let it ring three times, you know you
have no messages and can hang up to avoid a toll charge.
When Toll Saver is On, it overrides your Ring Delay setting. Toll
Saver must be off for the machine to operate using your Ring
Delay setting.
The Toll Saver feature is available only when the Message
Center is set to On.
If you are using Distinctive Ring, do NOT use the Toll Saver
feature.
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 1, 1.
1.Ring Delay
Press
or
to select
Toll Saver.
Press Menu/Set.
4
5
Press
or
to select On.
Press Menu/Set.
Press Stop/Exit.
SETUP RECEIVE 5 - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you’ll need to decide how long
the machine will signal you with its special pseudo/double-ring when
you have a voice call. (If it’s a fax call, the machine prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the machine rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on the same line as the machine or on any
extension phone (in a separate wall jack) on the same line as the
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 1, 2.
2.F/T Ring Time
Press
or
to select how
long the machine will ring to alert you that you have a voice call
(20, 30, 40 or 70 seconds).
Press Menu/Set.
Press Stop/Exit.
4
Even if the caller hangs up during the pseudo/double-ringing,
the machine will continue to ring for the set time.
Setting the Fax/Tel Announcement
(FAX-1920CN only)
For the Fax/Tel receive mode, you can set up the machine to play an
outgoing announcement for callers when no one is there to answer
page 9-7.)
5 - 7 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Receive (MFC-3320CN only)
When you use this feature, you don’t have to press Black Start,
Color Start, or the Fax Receive Code 51 when you answer a fax
call. Selecting Onallows the machine to receive fax calls
automatically, even if you lift the handset of an extension or external
phone. When you see Receivingon the LCD or when you hear
‘chirps’ through the handset of an extension phone connected to
another telephone wall jack, just replace the handset and your
machine will do the rest. Selecting Offmeans you’ll have to activate
the machine yourself by lifting the handset of an external or
extension phone, and then press Black Start or Color Start on the
machine—OR—by pressing 51 if you are not at your machine.
If this feature is set to On, but your machine doesn’t connect a
fax call when you lift a extension or external phone handset,
press the Fax Receive Code 51.
If you send faxes from a computer on the same phone line and
the machine intercepts them, set Easy Receive to Off.
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 1, 3.
3.Easy Receive
Use
or
to select On(or
Off).
Press Menu/Set.
Press Stop/Exit.
4
SETUP RECEIVE 5 - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Receive (FAX-1920CN only)
When you use this feature, you don’t have to press Black Start,
Color Start, or the Fax Receive Code
5 1 when you answer a
fax call and hear calling beeps. Just hold the handset and wait a few
seconds. When you see Receivingon the LCD or when you hear
“chirps” through the handset of an extension phone connected to
another telephone wall jack, just replace the handset. Your machine
does the rest. Selecting Onallows the machine to receive fax calls
automatically, even if you lift the handset of an extension or external
phone. SelectingSemilets the machine receive the call only if you’ve
answered it at the machine. Selecting Offmeans you’ll have to
activate the machine yourself, by pressing Black Start or Color
Start or by pressing
5 1 if you are not at your machine.
If you’ve set the feature to ON, but your machine doesn’t
automatically connect a fax call when you lift an external or
extension phone handset, press the Fax Receive code
At the machine, lift the handset and then press Black Start or
Color Start.
5 1.
If you send faxes from a computer on the same phone line and
the machine intercepts them, set Easy Receive to Off.
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 1, 3.
3.Easy Receive
Use
or
to select On,
Semi, or Off.
Press Menu/Set.
Press Stop/Exit.
4
5 - 9 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing a reduced incoming fax
(Auto Reduction)
If you choose On, the machine automatically reduces an incoming
fax to fit on one page of letter or legal size paper. The machine
calculates the reduction ratio by using the page size of the original
and your Paper Size setting (Menu/Set, 1, 3).
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 1, 5.
5.Auto Reduction
Use
or
to select On(or
Off).
Press Menu/Set.
Press Stop/Exit.
4
If you receive faxes that are split on two pages, turn on this
setting. But if the original is too long, the machine may print it on
two pages.
Receiving a fax at the end of a conversation
(FAX-1920CN Only)
At the end of a conversation you can ask the other party to fax you
information before you both hang up.
1
Ask the other party to place the original in their machine and to
pressStart. Tell the other party to wait until your machine sends
receiving tones (chirps) before hanging up.
2
3
When you hear the other machine’s CNG tones (beeps), press
Black Start or Color Start.
If you picked up the handset, replace it.
Printing a fax from the memory
If you set Fax Storage to ON for Remote Retrieval, you can still print
1
2
3
Press Menu/Set, 2, 5, 4.
Press Black Start or Color Start.
After printing has finished, press Stop/Exit.
4.Print Fax
SETUP RECEIVE 5 - 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced receiving operations
Operation from extension telephones
If you answer a fax call on an extension telephone, or an external
telephone in the EXT. jack of the machine, you can make your
machine take the call by using the Fax Receive Code. When you
press the Fax Receive Code 51, the machine starts to receive a
fax.
If the machine answers a voice call and pseudo/double-rings for you
to take over, use the Telephone Answer Code #51 to take the call at
If you answer a call and no one is on the line, you should assume that
you’re receiving a manual fax.
■ Press 51 and wait for the chirp or until the machine’s LCD
displays Receiving, and then hang up.
Your caller will have to press Start to send the fax.
For Fax/Tel mode only
When the machine is in Fax/Tel mode, it will use the F/T Ring Time
(pseudo/double-ringing) to alert you to pick up a voice call.
If you're at the machine, you can lift the handset to answer.
(FAX-1920CN only).
Lift the external telephone's handset, and then press Hook to
answer. (MFC-3320CN only)
If you’re at an extension phone, you’ll need to lift the handset during
the F/T Ring Time and then press #51 between the pseudo/double
rings. If no one is on the line, or if someone wants to send you a fax,
send the call back to the machine by pressing 51.
5 - 11 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a cordless external handset
If your cordless telephone is connected to the EXT. jack on the
machine and you typically carry the cordless handset elsewhere, it is
easier to answer calls during the Ring Delay. If you let the machine
answer first, you will have to go to the machine so you can press
Hook to transfer the call to the cordless handset.
Changing the remote codes
Remote Codes might not work with some telephone systems. The
preset Fax Receive Code is 51. The preset Telephone Answer
Code is #51.
If you are always disconnected when accessing your external
TAD remotely, try changing the Fax Receive Code and
Telephone Answer Code to another three-digit code (such as
### and 999).
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 1, 4.
4.Remote Code
Press
or
to select On(or
Off).
Press Menu/Set.
4
5
6
If you want to, enter a new Fax Receive Code.
Press Menu/Set.
If you want to, enter a new Telephone Answer Code.
Press Menu/Set.
Press Stop/Exit.
SETUP RECEIVE 5 - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Polling
Polling is the process of retrieving faxes from another fax machine.
You can use your machine to ‘poll’ other machines, or you can have
someone poll your machine.
Everyone who is involved in Polling needs to set up their fax
machines for Polling. When someone polls your machine to receive
a fax, they pay for the call. If you poll someone’s fax machine to
receive a fax, you pay for the call.
Some fax machines do not respond to the Polling feature.
Setting up Polling Receive
Polling Receive is when you call another fax machine to receive a fax
from it.
1
2
3
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 1, 6.
Enter the fax number you are
polling.
6.Polling RX
4
Press Black Start or Color Start.
The LCD shows Dialing.
Setting up Sequential Polling Receive
Your machine can ask for faxes from several fax units in a single
operation (Sequential Polling Receive). Afterwards, a Sequential
Polling Report will be printed.
1
2
3
If it is not illuminated in green, press
Press Menu/Set, 2, 1, 6.
Enter the fax machines you want to
(Fax).
6.Polling RX
poll using One-Touch, Speed-Dial, a Group or the dial pad. You
must press Menu/Set between each fax number.
4
Press Black Start or Color Start. Your machine will poll each
number or Group number in turn to receive a fax.
5 - 13 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone services
Your machine supports the Distinctive Ring and Caller ID subscriber
telephone services that some telephone companies offer. The
FAX-1920CN also supports the Call Waiting/Caller ID subscriber
service.
Distinctive Ring
Brother uses the term ‘Distinctive Ring’ but different telephone
companies have other names for this service such as SmartRing,
RingMaster, Teen-Ring, Indent-a-Call or Indent-a-Ring.
What does your telephone company’s ‘Distinctive Ring’ do?
Your telephone company’s Distinctive Ring service allows you to
have more than one number on the same phone line. If you need
more than one phone number, it is cheaper than paying for an
extra line. Each phone number has its own distinctive ring pattern,
so you will know which phone number is ringing. This is one way you
can have a separate phone number for your machine.
Please call your telephone company for availability and rates.
What does Brother’s ‘Distinctive Ring’ do?
The Brother machine has a Distinctive Ring feature that allows you
to use your machine to take full advantage of the telephone
company’s Distinctive Ring service. The new phone number on your
line can just receive faxes.
You must pay for your telephone company’s Distinctive Ring
service before you program the machine to work with it.
SETUP RECEIVE 5 - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Do you have Voice Mail?
If you have Voice Mail on the phone line that you will install your new
machine on, there is a strong possibility that Voice Mail and the
machine will conflict with each other while receiving incoming calls.
However, the Distinctive Ring feature allows you to use more
than one number on your line, so both Voice Mail and the
machine can work together without any problems. If each one
has a separate phone number, neither will interfere with the other’s
operations.
If you decide to get the Distinctive Ring service from the telephone
company, you will need to follow the directions below to ‘register’ the
new Distinctive Ring pattern they give you. This is so your machine
can recognize its incoming calls.
You can change or cancel the Distinctive Ring pattern at any
time. You can switch it off temporarily, and turn it back on later.
When you get a new fax number, make sure you reset this
feature.
Before you choose the ring pattern to register
You can only register one Distinctive Ring pattern with the machine.
Some ring patterns cannot be registered. The ring patterns below are
supported by your Brother machine. Register the one your telephone
company gives you.
Ring
Pattern
Rings
1
long-long
2
3
4
short-long-short
short-short-long
very long (normal pattern)
If the ring pattern you received is not on this chart, please call
your telephone company and ask for one that is shown.
5 - 15 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
■ The machine will only answer calls to its registered number.
■ The first two rings are silent on the machine. This is because the
fax must «listen» to the ring pattern (to compare it to the pattern
that was ‘registered’). (Other telephones on the same line will
ring.)
■ If you program the machine properly, it will recognize the
registered ring pattern of the ‘fax number’ within 2 ring patterns
and then answer with a fax tone. When the ‘voice number’ is
called, the machine will not answer.
Registering the Distinctive Ring pattern
Very important!
After you have set the Distinctive Ring feature to ON, the receive
mode is set to Manualautomatically. Unless you have a TAD or
Voice Mail set up on the Distinctive Ring number, Manualmode
means you must answer all the calls yourself. You can not change
the receive mode to another mode while the Distinctive Ring is set to
on.
1
2
Press Menu/Set, 2, 0, 1.
Press or to select Set.
Press Menu/Set.
1.Distinctive
3
Press
or
to select the stored ring pattern you want to use.
Press Menu/Set.
(You will hear each pattern as you scroll through the four
patterns. Make sure you choose the pattern that the telephone
company gave you.)
4
Press Stop/Exit.
Distinctive Ring is now set to On.
SETUP RECEIVE 5 - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning off the Distinctive Ring
1
2
Press Menu/Set, 2, 0, 1.
Press or to select Off.
1.Distinctive
Press Menu/Set.
Press Stop/Exit.
3
If you turn off Distinctive Ring, the machine will stay in Manual
receive mode. You will need to set the Receive Mode again.
5 - 17 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID
The Caller ID feature lets you use the Caller ID subscriber
service offered by many local telephone companies. This
service displays the telephone number, or name if it is available,
of your caller as the line rings.
After a few rings, the LCD shows the telephone number of your caller
(or name, if available). Once you pick up the handset, the Caller ID
information disappears from the LCD, but the call information
remains stored in the Caller ID memory.
■ You will see the first 16 characters of the number (or name).
■ Out of Areadisplay means call originated outside your Caller
ID service area.
■ Private Calldisplay means the caller has intentionally
blocked transmission of information.
If both the name and number are received, the LCD shows only the
name. You can print a list of Caller ID information received by your
Caller ID service varies with different carriers. Call your local
telephone company to determine the kind of service available in your
area.
Viewing Caller ID List
Caller ID memory stores information for up to thirty calls. When the
thirty-first call comes in, information about the first call is erased. You
can scroll through Caller ID information to review those calls made to
your machine.
1
2
Press Menu/Set, 2, 0, 2.
Press or to select
Display #.
2.Caller ID
Press Menu/Set.
If the name was not received, it will not be displayed.
3
Press or to scroll through the Caller ID memory to
select the Caller ID you want to view, and then press
Menu/Set. The LCD shows the caller’s name and number and
the date and time of the call.
SETUP RECEIVE 5 - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press
or
to return to the Caller ID listing.
—OR—
Press Stop/Exit.
Printing Caller ID List
1
2
Press Menu/Set, 2, 0, 2.
Press or to select
Print Report.
2.Caller ID
Press Menu/Set.
3
4
Press Black Start or Color Start.
After printing has finished, press Stop/Exit.
Call Waiting Caller ID (FAX-1920CN only)
The Call Waiting/Caller ID feature lets you use the Call
Waiting/Caller ID subscriber service offered by many local telephone
companies. This feature displays the telephone number (or name, if
available) of Call Waiting Callers on your fax machine’s LCD.
To set the Call Waiting Caller ID to On (or Off):
1
2
Press Menu/Set, 2, 0, 3.
Press or to select
On(or Off).
3.CallWaiting ID
Press Menu/Set.
To answer a Call Waiting signal:
3
To answer a Call Waiting signal while you’re talking on the
phone, ask the other party if you can put them on Hold to catch
the other call. The LCD shows the Caller ID.
4
5
Press Search/Speed Dial to switch to the second call.
To switch back to the first call, press Search/Speed Dial
again.
Either caller can hang up at any time. However, if you hang up
you will disconnect both callers.
5 - 19 SETUP RECEIVE
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Send
6
How to fax
You can send faxes from the ADF (automatic document feeder).
Enter Fax mode
Before sending faxes, make sure
(Fax) is illuminated in
green. If not, press
setting is Fax.
(Fax) to enter Fax mode. The default
How to dial
There are four ways to dial.
Manual dialing
Press all of the digits of the phone or fax number.
SETUP SEND 6 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch dialing
Press the One-Touch Key of the location you want to call. (See
To dial One-Touch numbers 6 to 10, hold down Shift as you press
the One-Touch Key.
To dial One-Touch number 5 to 8 (For MFC-3320CN) or 3 to 4 (For
FAX-1920C), hold down Shift as you press the One-Touch Key.
(MFC-3320CN)
(FAX-1920CN)
If the LCD shows Not Registeredwhen you press the
One-Touch key, number has not been stored on it.
Speed-Dialing
Press Search/Speed Dial, #, and then the two digit Speed-Dial
two-digit number
If the LCD shows Not Registeredwhen you enter the
Speed-Dial number, a number has not been stored for it.
6 - 2 SETUP SEND
Download from Www.Somanuals.com. All Manuals Search And Download.
Search
You can search for names you have stored in the One-Touch and
Speed-Dial memories. Press Search/Speed Dial and the
To search
numerically
To search alphabetically*
* To search alphabetically, you can use dial pad to enter the first
letter of the name you are looking for.
Out of Memory message
If you get an Out of Memorymessage while scanning the first page
of a fax, press Stop/Exit to cancel the scan. If you get an Out of
Memorymessage while scanning a subsequent page, you will have
the option to press Black Start to send the pages scanned so far,
or to press Stop/Exit to cancel the operation.
If the memory is full and you are faxing a single page, it will be
sent in real time.
SETUP SEND 6 - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic transmission (MFC-3320CN only)
This is the easiest way to send a fax.
Do not pick up the hand set of the external phone or press Hook
to listen for a dial tone
1
If it is not illuminated in green, press
(Fax).
2
3
Enter the fax number using the dial pad, One-Touch,
Speed-Dial or Search.
4
Press Black Start or Color Start.
Automatic transmission (FAX-1920CN Only)
This is the easiest way to send a fax.
Do not pick up the hand set of the machine or the external phone
or press Hook to listen for a dial tone.
1
If it is not illuminated in green, press
(Fax).
2
3
Enter the fax number using the dial pad, One-Touch,
Speed-Dial or Search.
4
Press Black Start or Color Start.
6 - 4 SETUP SEND
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual transmission (MFC-3320CN only)
Manual transmission lets you hear the dialing, ringing and
fax-receiving tones while sending a fax.
1
2
3
If it is not illuminated in green, press
(Fax).
Pick up the handset of the external phone and listen for a dial
tone.
—OR—
Press Hook and listen for a dial tone.
On the external phone, dial the fax number you want to call.
—OR—
4
If you pressed Hook, dial using the machine’s control panel.
5
6
When you hear the fax tone,
press Black Start or Color Start.
If you picked up the handset of the external phone, replace it.
Manual transmission (FAX-1920CN only)
Manual transmission lets you hear the dialing, ringing and
fax-receiving tones while sending a fax.
1
2
3
If it is not illuminated in green, press
Pick up the machine’s handset and listen for a dial tone.
—OR—
Press Hook and listen for a dial tone.
Dial the fax number you want to call.
4
5
When you hear the fax tone,
press Black Start or Color Start.
6
If you picked up the machine’s handset, replace it.
SETUP SEND 6 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a fax at the end of a conversation
(FAX-1920CN only)
At the end of a conversation you can send a fax to the other party
before you both hang up.
1
Ask the other party to wait for fax tones (beeps) and then to
press Start before hanging up.
2
If it is not illuminated in green, press
(Fax).
3
4
5
Press Black Start or Color Start.
Replace the handset.
6 - 6 SETUP SEND
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic sending operations
Sending faxes using multiple settings
When you send a fax you can choose any combination of these
settings: contrast, resolution, overseas mode, delayed fax timer,
polling transmission or real time transmission.
1
If it is not illuminated in green, press
pressingMenu/Set. After each setting is accepted, the LCD will
ask if you want to enter more settings:
(Fax) before
2
Press 1to select more settings. The
Other Settings
LCD will return to the Setup Send
1.Yes 2.No
menu.
—OR—
Press 2 if you have finished choosing settings and go to the next
step.
Contrast
If your original is very light or very dark, you may want to set the contrast.
Use Lightto send a light document or make the fax darker.
Use Darkto send a dark document or make the fax lighter.
1
2
3
4
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 2, 1.
1.Contrast
Press
or
to select Auto,
Lightor Dark.
Press Menu/Set.
5
6
Press 1 if you want to choose more settings and the LCD will
return to the Setup Sendmenu.
—OR—
Press 2 if you have finished choosing settings.
Enter a fax number.
Press Black Start or Color Start.
SETUP SEND 6 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax Resolution
You can use the Fax Resolution key to change the setting
temporarily (for this fax only). Press Fax Resolution and
to select the setting you want, and then press Menu/Set.
or
—OR—
You can change the default setting.
1
If it is not illuminated in green, press
(Fax).
2
3
4
Press Menu/Set, 2, 2, 2.
2.Fax Resolution
Press
or
to select the
resolution you want.
Press Menu/Set.
Press Stop/Exit.
5
Standard
Fine
Suitable for most typed originals.
Good for small print and transmits a little
slower than Standard resolution.
S. Fine
Photo
Good for small print or artwork and transmits
slower than Fine resolution.
Use when the original has varying shades of
gray. This has the slowest transmission
time.
Manual and automatic fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause, and then press Black Start or Color Start to try
again. If you want to make a second call to the last number dialed,
you can save time by pressing Redial/Pause and Black Start or
Color Start.
Redial/Pause only works if you dialed from the control panel.
If you are sending a fax automatically and the line is busy, the
machine will automatically redial one time after five minutes.
6 - 8 SETUP SEND
Download from Www.Somanuals.com. All Manuals Search And Download.
Color fax transmission
Your machine can send a color fax to machines that support this
feature.
However, color faxes cannot be stored in the memory, so Delayed
fax and Polling Transmit features are not available.
1
2
3
If it is not illuminated in green, press
(Fax).
Enter the fax number using the dial pad, One-Touch,
Speed-Dial or Search.
4
Press Color Start.
When you send a color fax, the machine will send it in real time
(even if Real Time TXis set to Off).
Dual Access (Not available for color faxes)
You can dial a number, and begin scanning the fax into memory—
even when the machine is sending from memory or receiving faxes.
The LCD shows the new job number and available memory.
Your machine normally uses Dual Access. However, to send a
color fax, the machine will send the original in real time (even if
Real Time TXis Off).
The number of pages you can scan into the memory will vary
depending on the data that is printed on them.
If you get a Out of Memorymessage while scanning the first
page of a fax, press Stop/Exit to cancel scanning. If you get a
Out of Memorymessage while scanning a subsequent page,
you can press Black Start to send the pages scanned so far,
or press Stop/Exit to cancel the operation.
SETUP SEND 6 - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Real Time Transmission
When you are sending a fax, the machine will scan the originals into
the memory before sending. Then, as soon as the phone line is free,
the machine will start dialing and sending.
If the memory becomes full, the machine will send the original in real
time (even if Real Time TXis set to Off).
Sometimes, you may want to send an important original immediately,
without waiting for memory transmission. You can set Real Time
TXto Onfor all documents or for the next fax only.
If you want to fax multiple pages, use Dual Access.
1
If it is not illuminated in green, press
(Fax).
2
3
4
Press Menu/Set, 2, 2, 5.
To change the default setting, press
or to select On(or Off).
5.Real Time TX
Press Menu/Set. Go to Step 6.
—OR—
For the next fax transmission only, press
or
to select
Next Fax Only.
Press Menu/Set.
5
6
Press
Fax:Off).
or
to select Next Fax:On(or Next
Press Menu/Set.
Press 1 if you want to choose more settings and the LCD will
return to the Setup Sendmenu.
—OR—
Press 2 if you have finished choosing settings.
Enter a fax number.
7
Press Black Start or Color Start.
In Real Time Transmission, the redial feature doesn't work.
If you are sending a color Fax, the machine will send it in real
time (even if Real Time TXis set to Off).
6 - 10 SETUP SEND
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking job status
Check which jobs are still waiting in the memory to be sent. (If there
are no jobs, the LCD shows No Jobs Waiting.)
1
2
Press Menu/Set, 2, 6.
If you have more than one job
6.Remaining Jobs
waiting, press
or
to scroll through the list.
3
Press Stop/Exit.
Canceling a job while scanning, dialing and
sending the original
You can cancel a job while you are scanning it into memory by
pressing Stop/Exit.
You can also cancel a job while the machine is dialing or sending the
original by pressing Stop/Exit.
Canceling a scheduled job
You can cancel a fax job that is stored and waiting in memory.
1
Press Menu/Set, 2, 6.
Any jobs that are waiting will appear
on the LCD.
6.Remaining Jobs
2
If you have more than two jobs waiting, press
select the job you want to cancel.
or
to
Press Menu/Set.
—OR—
If you only have one job waiting, go to Step 3.
Press 1 to cancel.
—OR—
Press 2 to exit without canceling.
To cancel another job go to Step 2.
Press Stop/Exit.
3
4
SETUP SEND 6 - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced sending operations
Broadcasting (Not available for color faxes)
Broadcasting is when the same fax message is automatically sent to
more than one fax number. Using the Menu/Set key, you can
include Groups, One-Touch, Speed-Dial numbers and up to 50
manually dialed numbers. If you did not use up any of the numbers
for Groups, access codes or credit card numbers, you can
‘broadcast’ faxes to as many as 154 (FAX-1920CN) or 158
(MFC-3320CN) different numbers. However, the available memory
will vary depending on the types of jobs in the memory and the
number of locations used for broadcasting. If you broadcast to the
maximum numbers available, you will not be able to use Dual Access
and Delayed fax.
To include One-Touch or Speed-Dial numbers and manually dialed
numbers in the same broadcast, you must pressMenu/Set between
each of the numbers. Use Search/Speed Dial to help you choose
the numbers easily.
After the broadcast is finished, a Broadcast Report will be printed to
let you know the results.
■ Enter the long dialing sequence numbers as you would normally,
but remember that each One-Touch and Speed-Dial number
counts as one number, so the number of locations you can store
becomes limited.
■ If the memory is full, press Stop/Exit to stop the job or if more
than one page has been scanned, press Black Start to send the
portion that is in the memory.
1
If it is not illuminated in green, press
(Fax).
2
3
Enter a number using One-Touch, Speed-Dial, a Group
number, Search or manual dialing using the dial pad.
(Example: Group number)
4
When the LCD displays the fax number or name of the other
party, press Menu/Set.
You will be asked to press the next number.
6 - 12 SETUP SEND
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Enter the next number.
(Example: Speed-Dial number)
When the LCD displays the fax number or name of the other
party,
press Menu/Set.
7
8
Enter another fax number.
(Example: Manual dialing using the dial pad.)
Press Black Start.
Overseas Mode
If you are having difficulty sending a fax overseas due to possible
interference on the phone line, we recommend that you turn on the
Overseas Mode. After you send a fax using this feature, the feature
will turn itself off.
1
If it is not illuminated in green, press
(Fax).
2
3
4
Press Menu/Set, 2, 2, 7.
7.Overseas Mode
Press
or
to select On(or
Off).
Press Menu/Set.
5
6
Press 1 if you want to choose more settings and the LCD will
return to the Setup Sendmenu.
—OR—
Press 2 if you have finished choosing settings.
Enter a fax number.
Press Black Start or Color Start.
SETUP SEND 6 - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Delayed Fax (Not available for color faxes)
During the day you can store up to 50 faxes in the memory to be sent
within 24 hours. These faxes will be sent at the time of day you enter
in Step 4. Press Menu/Set to accept it, or enter another time for the
faxes to be sent.
1
If it is not illuminated in green, press
(Fax).
2
3
4
Press Menu/Set, 2, 2, 3.
Enter the time you want the fax to
be sent (in 24-hour format).
3.Delayed Fax
Press Menu/Set.
(For example, enter 19:45 for 7:45 PM.)
Press 1 to leave the originals
waiting in the ADF.
1.Doc 2.Memory
—OR—
Press 2 to scan the original into memory.
5
6
Press 1 if you want to choose more settings and the LCD will
return to the Setup Sendmenu.
—OR—
Press 2 if you have finished choosing settings.
Enter a fax number.
Press Black Start.
The number of pages you can scan into the memory depends
on the amount of data that is printed on each page.
6 - 14 SETUP SEND
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Polled Transmit
(Not available for color faxes)
Polled Transmit is when you set up your machine to wait with a paper
original so another fax machine can call and retrieve it.
1
If it is not illuminated in green, press
(Fax).
2
3
4
Press Menu/Set, 2, 2, 6.
6.Polled TX
Press
or
to choose On
(or Off).
Press Menu/Set.
1.Doc 2.Memory
5
6
Press 1 to leave the original waiting
in the ADF.
—OR—
Press 2 to scan the original into memory.
Press 1 if you want to choose more settings and the LCD will
return to the Setup Sendmenu.
—OR—
Press 2 if you have finished choosing settings, and go to Step 7.
Press Black Start.
The machine starts scanning the document.
If you place the original in the ADF, wait for the fax to be polled.
7
8
If you press 1 in Step 5, the original remains in the ADF until
your machine is polled. If you must use your machine before the
polled transmit occurs, you must first cancel this job.
If you press 2 in Step 5, the document will be stored and can be
retrieved from any other fax machine until you delete the fax in
memory by using the Canceling a Job menu setting. (See
SETUP SEND 6 - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Delayed Batch Transmission
(Not available for color faxes)
Before sending the delayed faxes, your machine will help you
economize by sorting all the faxes in the memory by destination and
scheduled time. All delayed faxes that are scheduled to be sent at
the same time to the same fax number will be sent as one fax to save
transmission time.
1
2
3
4
If it is not illuminated in green, press
(Fax).
Press Menu/Set, 2, 2, 4.
4.Batch TX
Press
or
to select On(or
Off).
Press Menu/Set.
Press Stop/Exit.
5
6 - 16 SETUP SEND
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick-Dial numbers and
dialing options
7
Storing numbers for easy dialing
You can set up your machine to do three types of easy dialing:
One-Touch, Speed-Dial and Groups for Broadcasting faxes.
If you lose electrical power, the quick-dial numbers that are in
the memory will not be lost.
Storing One-Touch Dial numbers
Your machine has 4 (MFC-3320CN) or
2(FAX-1920CN) One-Touch keys where you can
store 8 (MFC-3320CN) or 4 (FAX-1920CN) fax or
phone numbers for automatic dialing. To access
numbers 5 to 8 (MFC-3320CN) or 3 to 4
(FAX-1920CN), hold down Shift as you press the
One-Touch key. When you press a One-Touch key
the LCD shows the name, if you stored it, or the
(MFC-3320CN)
number.
One-Touch keys are the 4 (MFC-3320CN) or 2
(FAX-1920CN) keys (numbers 05–08
(MFC-3320CN) or 03–04 (FAX-1920CN)) located on
the left side of the control panel.
(For USA only) The Brother fax back system number has been
preprogrammed on One-Touch key 1.
1
2
Press Menu/Set, 2, 3, 1.
Press the One-Touch key where
you want to store a number.
1.One-Touch Dial
3
Press
or
to select Type:Fax/Tel(or E-Address).
Press Menu/Set.
For information on using an E-mail address, see Chapter 6
Internet Fax in the Network User’s Guide.
QUICK-DIAL NUMBERS AND DIALING OPTIONS 7 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Enter a number (up to 20 digits).
Press Menu/Set.
■ If you want to enter a pause in the dialing sequence (for
example, to access an outside line), press Redial/Pause
as you are entering the digits.
Each key press of Redial/Pause enters a 3.5 second
pause when the number is dialed, and a dash appears on
the screen.
5
6
Use the dial pad to enter the name (up to 15 characters).
Press Menu/Set.
—OR—
Press Menu/Set to store the number without a name.
Go to Step 2 to store another One-Touch number.
—OR—
Press Stop/Exit.
When you dial a quick-dial number, the LCD shows the name
you’ve stored, or, if you haven’t stored a name the number will
be shown.
7 - 2 QUICK-DIAL NUMBERS AND DIALING OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Speed-Dial numbers
You can store Speed-Dial numbers, so that when you dial you will
only have to press a few keys (Search/Speed Dial, #, the two-digit
number, and Black Start or Color Start). The machine can store
100 Speed-Dial numbers.
1
2
Press Menu/Set, 2, 3, 2.
Use the dial pad to enter a two-digit
Speed-Dial location number (00-99 for MFC-3320CN, 01 to 40
for FAX-1920CN).
2.Speed-Dial
(For example, press 05.)
Press Menu/Set.
3
Press
or
to select Type:Fax/Tel(or E-Address).
Press Menu/Set.
For information on using an E-mail address, see Chapter 6
Internet Fax in the Network User’s Guide.
4
5
Enter the phone or fax number (up to 20 digits).
Press Menu/Set.
Use the dial pad to enter the name (up to 15 characters).
Press Menu/Set.
—OR—
Press Menu/Set to store the number without a name.
Go to Step 2 to store another Speed-Dial number.
—OR—
6
Press Stop/Exit.
QUICK-DIAL NUMBERS AND DIALING OPTIONS 7 - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing One-Touch and Speed-Dial numbers
If you try to store a One-Touch or Speed-Dial number where a
number has already been stored, the LCD will show the name that
has been stored there (or number) and will ask you to do one of the
following:
1
Press 1 to change the stored
number.
1.Change 2.Exit
—OR—
Press 2 to exit without making a change.
How to change the stored number:
■ If you want to erase the whole number or whole name, press
Stop/Exit when the cursor is under the first the digits or
letters. The characters above and to the right of the cursor
will be deleted.
■ If you want to change a character, use
or
to position
the cursor under the character you want to change, and then
type over it.
2
3
Enter a new number.
Press Menu/Set.
Follow the directions beginning at Step 5 in Storing One-Touch
7 - 4 QUICK-DIAL NUMBERS AND DIALING OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up Groups for Broadcasting
Groups, which can be stored on a One-Touch key or a Speed-Dial
location, allow you to send the same fax message to many fax
numbers by pressing only a One-Touch key and Start or
Search/Speed Dial, #, the two-digit location and Start.
First, you'll need to store each fax number as a One-Touch or
Speed-Dial number. Then, you can combine them into a Group,
Each Group uses up a One-Touch key or a Speed-Dial location.
Finally, you can have up to six small Groups, or you can assign up to
103 numbers (FAX-1920CN) or up to 107 numbers (MFC-3320CN)
to one large Group.
1
2
Press Menu/Set, 2, 3, 3.
Decide where you wish to store the
Group.
3.Setup Groups
—AND—
Press a One-Touch key.
—OR—
Press Search/Speed Dial and enter the two-digit location,
and then press Menu/Set.
3
Use the dial pad to enter the Group
number.
Setup Group:G0
Press Menu/Set.
(For example, press 1 for Group 1.)
QUICK-DIAL NUMBERS AND DIALING OPTIONS 7 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
To include One-Touch or Speed-Dial numbers in the Group,
enter them as if you were dialing.
For example, for One-Touch key 02, press One-Touch key 02.
For Speed-Dial location 09, press Search/Speed Dial, then
press 09 on the dial pad. The LCD shows 02, #09.
5
6
Press Menu/Set to accept the numbers for this Group.
the Group.
Press Menu/Set.
(For example, NEW CLIENTS)
7
Press Stop/Exit.
You can print a list of all One-Touch and Speed-Dial numbers.
marked in the GROUP column.
7 - 6 QUICK-DIAL NUMBERS AND DIALING OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing options
Access codes and credit card numbers
Sometimes you may want to choose from several long distance
carriers when you make a call. Rates may vary depending on the time
and destination. To take advantage of low rates, you can store the
access codes or long-distance carriers and credit card numbers as
One-Touch and Speed-Dial numbers. You can store these long
dialing sequences by dividing them and setting them up on separate
keys in any combination. You can even include manual dialing using
the dial pad.
The combined number will be dialed in the order that you entered it
as soon as you press Black Start or Color Start.
For example, you can store ‘555’ on One-Touch key 03 and ‘7000’
on One-Touch key 02. If you press One-Touch key 03, One-Touch
key 02, and Black Start or Color Start, you will dial ‘555-7000’.
To temporarily change a number, you can substitute part of the
number with manual dialing using the dial pad.
For example, to change the number to 555-7001 you could press
One-Touch key 03 and then press 7001 using the dialing pad.
If you must wait for another dial tone or signal at any point in the
dialing sequence, store a pause there in the number by pressing
Redial/Pause. Each key press adds a 3.5-second delay.
QUICK-DIAL NUMBERS AND DIALING OPTIONS 7 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Pause
Press Redial/Pause to insert a 3.5-second pause between
numbers. If you are dialing overseas, you can press Redial/Pause
as many times as needed to increase the length of the pause.
Fax Redial
If you’re sending a fax manually and the line is busy, press
Redial/Pause to try again. Any time you want to make a second call
to the last number dialed, press Redial/Pause to save time.
If you’re sending a fax automatically and the line is busy, the machine
will automatically redial one time five minutes after the transmission.
Tone or Pulse
If you have a Pulse dialing service, but need to send Tone signals
(for example, for telephone banking), follow the instructions below. If
you have Touch Tone service, you will not need this feature to send
tone signals.
1
If you have the FAX-1920CN, lift the handset.
—OR—
If you have the MFC-3320CN, lift the handset of the external
phone.
2
3
Press #. Any digits dialed after this will send tone signals.
When you hang up, the machine will return to the Pulse dialing
service.
7 - 8 QUICK-DIAL NUMBERS AND DIALING OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone (voice) operation
(FAX-1920CN only)
You can use the machine to make voice telephone calls by dialing
manually or by using Search, One-Touch Dial or Speed-Dial
memory. You can use the handset to make and receive calls.
When you dial an quick-dial number, the LCD shows the name
you’ve stored, or if you haven’t stored a name, the fax number you’ve
stored.
How to dial
Making a telephone call
1
Pick up the handset.
—OR—
Press Hook.
2
When you hear a dial tone, dial the call using the dial pad,
One-Touch, Speed-Dial and Search.
.
If you pressed Hook to dial, pick up the handset when the other
person answers. (The speaker works only one way. The other
person won’t be able to hear you unless you pick up the
handset.)
3
To hang up, replace the handset.
Hold (FAX-1920CN only)
1
2
3
Press Hook/Hold to put a call on Hold.
You can put down the handset without disconnecting the call.
Pick up the machine handset to release the call from Hold.
Picking up an extension handset will not release the call from
Hold.
QUICK-DIAL NUMBERS AND DIALING OPTIONS 7 - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Fax Options
8
Fax Forwarding/Paging
You cannot use Paging and Fax Forwarding at the same time.
After you have selected the Paging or Fax Forwarding feature,
Fax Storage is set to On automatically. If you bring the Paging
or Fax Forwarding feature back to Off, Fax Storage stays on.
Programming a Fax Forwarding number
When Fax Forwarding is set to On, your machine stores the received
fax in the memory. Then it dials the fax number you’ve programmed
and forwards the fax message.
1
2
Press Menu/Set, 2, 5, 1.
Press or to select
Fax Forward.
1.Fax Fwd/Paging
Press Menu/Set.
The LCD will ask you to enter the
fax number to which faxes will be
forwarded.
Fwd#:
3
4
Enter the forwarding number (up to 20 digits).
Press Menu/Set.
Press Stop/Exit.
8 - 1 REMOTE FAX OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming your pager number
When Paging is selected, your machine dials the pager number
you’ve programmed, and then dials your Personal Identification
Number (PIN). This activates your pager so you will know that you
have a fax message in the memory.
1
2
Press Menu/Set, 2, 5, 1.
1.Fax Fwd/Paging
Press
or
to select
Paging.
Press Menu/Set.
3
4
Enter your pager phone number followed by # # (up to 20 digits).
Press Menu/Set.
Do not include the area code if it is the same as that of your
machine.
For example, press 1 8 0 0 5 5 5 1 2 1 2 # #.
If your pager needs a PIN, enter the PIN, press #, press
Redial/Pause, enter your fax number followed by # #.
Press Menu/Set.
(For example, press 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5
1 2 1 2 # #)
—OR—
If you do not need a PIN, press Redial/Pause, enter your fax
number followed by # #.
Press Menu/Set.
(For example, press Redial/Pause 1 8 0 0 5 5 5 1 2 1 2 # #)
Press Stop/Exit.
5
You cannot change a Paging number or PIN remotely.
REMOTE FAX OPTIONS 8 - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax
messages from another location using Fax Forwarding, Paging, or
8-6.) If there is paper in your machine, a back-up copy of each fax
will be printed. The LCD will show when you have a fax stored in
memory.
1
Press Menu/Set, 2, 5, 2.
The LCD will ask you to choose a
fax setting.
2.Fax Storage
2
3
Press
or
to select On(or Off).
Press Menu/Set.
Press Stop/Exit.
If there are faxes in the memory
when you turn Fax Storage OFF,
the LCD will ask if you want to erase
the faxes in the memory.
Erase All Fax?
1.Yes 2.No
If you press 1, all fax data is erased and Fax Storage is turned off.
If you press 2, faxes are not erased and Fax Storage stays on.
■ After you have selected the Paging or Fax Forwarding
feature, Fax Storage is set to Onautomatically. If you turn
the Paging or Fax Forwarding feature back to Off, Fax
Storage stays on.
Backup Print
If you’ve set Fax Storageto On, your machine automatically prints
faxes as they are received into the memory.
This is a safety feature in case the power goes off so you won’t lose
your messages.
If there is a power failure, you will not lose the data in memory
up to 4 days. (FAX-1920C only)
8 - 3 REMOTE FAX OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting your Remote Access Code
The remote access code lets you access the Remote Retrieval
features when you are away from your machine. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is inactive code (--- ).
1
2
Press Menu/Set, 2, 5, 3.
Enter a three-digit code using
3.Remote Access
numbers 0-9,
or #.
Press Menu/Set. (The preset ‘ ’ cannot be changed.)
Do not use the same digits that appear in your Fax Receive
Code( 51) or Telephone Answer Code (#51).
3
Press Stop/Exit.
You can change your code at any time by entering a new one.
If you want to make your code inactive, press Stop/Exit in Step
2 to restore the inactive setting (--- ).
REMOTE FAX OPTIONS 8 - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Retrieval
You can call your machine from any touch tone telephone or fax
machine, then use the Remote Access Code and remote commands
to retrieve fax messages. Be sure to cut out the Remote Retrieval
Access Card on the last page and keep it with you at all times.
Using your Remote Access Code
1
2
3
Dial your fax number from a telephone or another fax machine
using touch tone.
When your machine answers, immediately enter your Remote
Access Code (3 digits followed by ).
The machine signals if it has received fax messages:
1 long beep — Fax messages
2 long beep — Voice messages (FAX-1920CN only)
3 long beep — Fax & Voice messages (FAX-1920CN only)
No beeps — No messages
4
The machine gives two short beeps, which tells you to enter a
command. The machine will hang up if you wait longer than 30
seconds to enter a command. The machine will beep three
times, if you enter an invalid command.
5
6
Press 90 to reset the machine when you’ve finished.
Hang up.
If your machine is set to Manualmode and you want to use the
remote retrieval features, you can access your machine by
waiting about 2 minutes after it starts ringing, and then entering
the Remote Access Code within 30 seconds.
8 - 5 REMOTE FAX OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commands
Follow the commands below to access features when you are away
from the machine. When you call the machine and enter your
Remote Access Code (3 digits followed by ), the system will give
two short beeps and you must enter a remote command.
Remote commands
90 Exit
Operation details
After a long beep, you can exit Remote
Retrieval.
91 Playing Voice Messages
(FAX-1920CN only)
After one long beep, the machine plays the
ICM.
1 Skip to back
or
Press 1 while listening to an ICM to repeat it.
If you press 1 before a message, you will hear
the previous message.
Repeat
2 Skip next
While playing the ICM, you can skip to the
next message.
9 STOP Playing
Stop playing the ICM.
93 Erase all ICM
(FAX-1920CN Only)
If you hear one long beep, the erase is
accepted. If you hear three short beeps, you
cannot erase because all voice messages
have not been played, or there are no voice
message to erase.
*This code erases all recordedmessages, not
one at a time.
94 Play and Record OGM in
Memory
(FAX-1920CN only)
1 Play
1 Msg Ctr OGM
2 F/T OGM
The machine plays the selected OGM. You
can stop playing OGMs by pressing 9.
2 Record 1 Msg Ctr OGM
2 F/T OGM
After one long beep, you can record the
selected OGM. You will hear the message
played once. You can stop recording the
message by pressing 9.
REMOTE FAX OPTIONS 8 - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commands
Operation details
95 Change the Fax Forwarding
or Paging settings
1 OFF
If you hear one long beep, the change has
been accepted. If you hear three short beeps,
you cannot change it because the conditions
have not been met (for example, registering a
fax forwarding or paging number). You can
register your Fax Forwarding number by
2 Fax Forwarding
3 Paging
4 Fax Forwarding number
have registered the number, Fax Forwarding
will be set to On.
6 Fax Storage ON
7 Fax Storage OFF
You can turn Fax Storageto On(or Off
after you have retrieved or erased all your
messages).
96 Retrieve a fax
2 Retrieve all faxes
Enter the number of a remote fax machine to
receive stored fax message(s). (See page
8-9.)
3 Erase faxes from the
memory
If you hear one long beep, you can erase fax
messages from the memory.
97 Check the receiving status
(MFC-3320CN only)
You can check whether your machine has
received any faxes. If yes, you will hear one
long beep. If no, you will hear three short
beeps.
1 Fax
97 Check the receiving status You can check whether your machine has
(FAX-1920CN only)
received any FAX or VOICE messages. If
yes, you will hear one long beep. If no, you will
hear three short beeps.
1 Fax
2 Voice
98 Change the Receive Mode
(MFC-3320CN only)
If you hear one long beep, you can change
the Receive Mode.
1 External TAD
2 Fax/Tel
3 Fax Only
8 - 7 REMOTE FAX OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commands
Operation details
98 Change Receive Mode
(FAX-1920CN only)
If you hear one long beep, you can change
the Receive Mode.
1 Msg Ctr
2 Fax/Tel
3 Fax Only
REMOTE FAX OPTIONS 8 - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Retrieving fax messages
1
2
Dial your fax number.
When your machine answers, immediately enter your Remote
Access Code (3 digits followed by ). If you hear one long
beep, you have messages.
3
4
As soon as you hear two short beeps, use the dial pad to press
962.
Wait for the long beep, and then use the dial pad to enter the
number of the remote fax machine where you want your fax
messages sent to followed by ## (up to 20 digits).
You cannot use
you want to store a pause.
and # as dial numbers. However, press # if
5
Hang up after you hear your machine beep. Your machine will
call the other machine, which will then print your fax messages.
Changing your Fax Forwarding number
You can change the default setting of your fax forwarding number
from another telephone or fax machine using Touch Tone.
1
2
Dial your fax number.
When your machine answers, immediately enter your Remote
Access Code (3 digits followed by ). If you hear one long
beep, you have messages.
3
4
When you hear two short beeps, use the dial pad to press 954.
Wait for the long beep, and then use the dial pad to enter the
new number of the remote fax machine where you want your fax
messages forwarded followed by ## (up to 20 digits).
You cannot use
you want to store a pause.
and # as dial numbers. However, press # if
5
Hang up after you hear your machine beep.
8 - 9 REMOTE FAX OPTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Center
(FAX-1920CN only)
9
Message Center mode
Message Center mode allows you to store up to 99 incoming voice
messages that are a maximum of 3 minutes each in the memory.
Voice messages are stored on a “first-come, first-served” basis. You
page 8-3.)
You must record an outgoing message in order to use the Message
Center mode.
Setting up the Message Center
You must set up the Message Center in the following order:
1
Record Message Center Outgoing Message (Msg Ctr OGM).
9-2.)
Press and hold
mode.
until it lights to activate the Message Center
MESSAGE CENTER (FAX-1920CN ONLY) 9 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Message Center Outgoing Message
Recording the Message Center Outgoing Message (Msg Ctr OGM)
is the first step you need to follow before you can turn on the
Message Center. Make sure your OGM is less than 20 seconds long.
1
Press Menu/Set, 2, 7, 1.
The LCD prompts you to choose an
OGM.
1.OGM
2
Press
or
to select Msg
Msg. Ctr OGM
Ctr OGM(not F/T OGM).
Press Menu/Set.
This is the only setting you can select if you want to turn on
the Message Center.
3
4
Press
or
to select Record OGM.
Press Menu/Set.
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a
fax, please press
button.
5 1, wait for fax tones, then press the Start
5
6
Replace the handset.
The Message Center will play your OGM.
Press Stop/Exit.
Listening to Outgoing Message (OGM)
1
2
Press Menu/Set, 2, 7, 1.
Press or to select Msg
Ctr OGM(or F/T OGM).
1.OGM
Press Menu/Set.
3
4
Press
or
to select Play OGM.
Press Menu/Set.
Adjust the volume by pressing Volume
or
.
Press Stop/Exit.
9 - 2 MESSAGE CENTER (FAX-1920CN ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing Outgoing Message (OGM)
1
2
Press Menu/Set, 2, 7, 1.
Press or to select Msg
Ctr OGM(not F/T OGM).
1.OGM
Press Menu/Set.
3
4
Press
or
to select Erase OGM.
Press Menu/Set.
Press 1 to erase the OGM.
—OR—
Press 2 to exit without erasing.
Press Stop/Exit.
5
Activating Message Center mode
Press and hold
LCD shows:
until it lights and the
MC:Msg
When
light is out, the Message Center is OFF.
Message indicator
The
light flashes when you have new messages waiting for your
review.
The LCD displays the total number of
voice and fax messages stored in the
Message Center memory.
Voice:03 Fax:00
MESSAGE CENTER (FAX-1920CN ONLY) 9 - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing voice messages
Follow the steps below to listen to voice messages:
1
Press Play/Record.
Adjust the Volume by pressing
or
.
All messages are played in the order they were recorded. The
LCD shows the number of the current message, and the total
number of messages.
If Caller ID information was received, the machine beeps during
the message and displays the Caller ID information for one
second.
During playback, the LCD shows the time and date the message
was recorded.
2
3
Press
message. Press # (FWD) to skip to the next message. You can
press
(RWD) at the end of the message to repeat a
and # repeatedly until you reach the message you
want to play.
Press Stop/Exit.
Printing a fax message
Once you print a new fax message stored in memory, it is erased
from the memory automatically.
1
2
Press Play/Record. After two seconds, the fax machine
begins to play voice messages.
If the Fax Storage is set to Onand
Print Fax
there are fax messages in memory,
the LCD shows:
1.Yes 2.No
3
To print the faxes, press 1.
—OR—
Press 2 to exit without printing.
9 - 4 MESSAGE CENTER (FAX-1920CN ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing incoming messages
You can erase voice messages individually, or all at once.
To erase voice messages individually
1
Press Play/Record.
The machine sounds a two-second beep and begins message
playback. Each message is preceded by one long beep, and
followed by two short beeps.
2
To erase a specific message, press
Erase immediately after the two
short beeps, or while the message
Erase This Msg.?
1.Yes 2.No
is playing.
3
4
Press 1 to erase the message.
—OR—
Press 2 to cancel.
Press Stop/Exit.
To erase messages all at once
1
2
Press Erase.
Press or
Erase All Voice
to select erasing
all voice messages (Voice), all document messages (Fax), or
all voice and fax messages (Msg.).
Press Menu/Set.
Press 1 to erase.
—OR—
3
4
Press 2 to cancel.
Press Stop/Exit.
MESSAGE CENTER (FAX-1920CN ONLY) 9 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Maximum Time for incoming messages
Your machine comes set to receive voice messages up to 30
seconds long. You can change this setting to 60, 120 or 180
seconds.
1
2
Press Menu/Set, 2, 7, 2.
Press or to select the
maximum time setting for incoming messages (30, 60, 120 or
2.ICM Max.Time
180 seconds).
Press Menu/Set.
Press Stop/Exit.
3
ICM Recording Monitor
This feature lets you turn the speaker volume for voice messages On
or Off. When you turn the monitor Off, you will not hear messages
as they come in.
1
2
Press Menu/Set, 2, 7, 3.
3.ICM Rec.Monitr
Use
or
to select Off(or
On).
Press Menu/Set.
Press Stop/Exit.
3
9 - 6 MESSAGE CENTER (FAX-1920CN ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a conversation
You can record a telephone conversation by pressing Play/Record
during the conversation. Your recording can be as long as the
Incoming Message Maximum Time. The other party will hear an
intermittent beep while recording. To stop recording, press
Stop/Exit.
Record Fax/Tel Outgoing Announcement
(F/T OGM)
This is the announcement played by your machine (not an external
TAD) when someone calls and your machine is set to Fax/Tel
receive mode. Although callers hear your announcement, they
cannot leave a message. By choosing F/T OGM (not Msg Ctr OGM)
you can record the announcement using the same steps as for the
erase the F/T OGM the same way, by choosing F/T OGM(not Msg
If you need to review the steps for setting up the Fax/Tel receive
mode, see Chapter 5.
MESSAGE CENTER (FAX-1920CN ONLY) 9 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing reports
10
Machine settings and activity
You need to set up the Transmission Verification Report and Journal
Period in the menu table.
Press Menu/Set, 2, 4, 1.
1.Transmission
—OR—
Press Menu/Set, 2, 4, 2.
2.Journal Period
Customizing the Transmission Verification
Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you selectOnor On+Image, the
report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again. Selecting
On+Imageor Off+Imagewill print a section of the fax’s first page
on the report to help you remember.
When the Verification Report is turned OFF, the Report will only
print it there is a transmission error, and in the RESULT column
it will show NG.
1
2
Press Menu/Set, 2, 4, 1.
Press or to select Off,
Off+Image, Onor On+Image.
1.Transmission
Press Menu/Set.
3
Press Stop/Exit.
10 - 1 PRINTING REPORTS
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Journal Period
You can set the machine to print a journal at specific intervals (every
50 faxes, 6, 12 or 24 hours, 2 or 7 days). If you set the interval to Off,
you can print the report by following the Steps on the next page.
The default setting is Every 50 Faxes.
1
2
Press Menu/Set, 2, 4, 2.
2.Journal Period
Press
or
to choose an
interval.
Press Menu/Set.
(If you choose 7 days, the LCD will ask you to choose a day on
which to begin the 7-day countdown.)
3
4
Enter the time to begin printing in 24-hour format.
Press Menu/Set.
(For example: enter 19:45 for 7:45 PM.)
Press Stop/Exit.
If you select 6, 12, 24 hours, 2 or 7 days, the machine will print
the report at the selected time and then erase all jobs from its
memory. If the machine’s memory becomes full with 200 jobs
before the time you selected has passed, the machine will print
the Journal early and then erase all jobs from memory. If you
want an extra report before it is due to print, you can print it
without erasing the jobs from memory.
If you select Every 50 Faxes, the machine will print the Journal
when the machine has stored 50 jobs.
PRINTING REPORTS 10 - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing reports
Six reports are available
Prints the Help List so you can see at-a-glance
how to quickly program your machine.
1.Help List
Lists names and numbers stored in the
One-Touch and Speed-Dial memory, in numerical
order.
2.Quick-Dial
3.Fax Journal
4.Transmission
Lists information about the last incoming and
outgoing faxes.
(TX means Transmit.) (RX means Receive.)
Prints a Transmission Verification Report for your
last transmission.
Lists your settings.
5.User Settings
6.Network Config
Lists your Network settings.
To print a report
1
For FAX-1920CN, press Ink/Reports key with Shift key, or
press Menu/Set, 6.
For MFC-3320CN, press Menu/Set, 7.
2
Press
or
to select the report you want.
Press Menu/Set.
—OR—
Enter the number of the report you want to print.
For example, press 1 to print the Help List.
Press Black Start.
3
10 - 3 PRINTING REPORTS
Download from Www.Somanuals.com. All Manuals Search And Download.
Making copies
11
Using the machine as a copier
You can use your machine as a copier, making up to 99 copies at a
time.
Enter Copy mode
Before making copies, make sure that
(Copy) is illuminated
in green. If it is not, press (Copy) to enter Copy mode. The
default setting is Fax. You can change the number of seconds or
The LCD shows the default copy setting
Copy Ratio
Quality
No of Copies
MAKING COPIES 11 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a single copy
1
Press
(Copy) to illuminate it in green.
2
3
Press Black Start or Color Start.
To stop copying, press Stop/Exit.
Making multiple copies
1
Press
(Copy) to illuminate it in green.
2
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
Press Black Start or Color Start.
Out of Memory message
If the memory becomes full while you are
making copies, the LCD message will
guide you through the next step.
Out of Memory
If the Out of Memorymessage appears, press Stop/Exit to
cancel or Black Start or Color Start to copy scanned pages. You
will need to clear some jobs from the memory before you can
continue.
To gain extra memory, you can turn off Fax Storage.
—OR—
Print the faxes that are in the memory.
When you get an Out of Memorymessage, you may be able to
make copies if you first print incoming faxes in the memory to restore
the memory to 100%.
11 - 2 MAKING COPIES
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Copy keys
(Temporary settings)
When you want to change the settings only for the next copy, use the
Temporary Copy keys. You can use different combinations.
These settings are temporary, and the machine returns to its default
settings 60 seconds after it finishes copying. If you want to use these
temporary settings again, place the next original in the ADF within
that time. However, if you have set the Mode Timer for copy and
Scan (Only for MFC Models) modes to 0 or 30 seconds, the machine
returns to the default settings after the number of seconds that has
Temporary Copy keys
MAKING COPIES 11 - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quality
You can select the copy quality. The default setting is Normal.
Press Quality
Normal
Recommended mode for ordinary
printouts. Good copy quality with
adequate copy speed.
Fast
Fast copy speed and lowest ink
consumption. Use FAST to save
time (original to be proof-read,
large originals or many copies).
and
or
Best
Use this mode to copy precise
images such as photographs.
BEST uses the highest resolution
and slowest speed.
1
2
Press
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
5
Press Quality.
Press
or
to choose the copy quality (Fast, Normal
or Best). Press Menu/Set.
6
Press Black Start or Color Start.
—OR—
Press other Temporary Copy keys for more settings.
11 - 4 MAKING COPIES
Download from Www.Somanuals.com. All Manuals Search And Download.
Options
Use the Options key to set the following copy settings only for the
next copy.
Press
Copy
Menu Selections
Options
Factory
Setting
Page
Options
select
select
Enlarge/Reduce
50%/
100%
78%:LGL→ LTR/
93% A4→ LTR/100%/
104%:EXE→ LTR/
186%:4"×6"→ LTR/
200%/
Custom (25-400%)
Paper Type
Paper Size
Plain/Inkjet/
Glossy(4-Coloror
3-Color)/
Plain
Transparency
Letter/Legal/
4"(W)×6"(H)
Letter
Brightness
Contrast
-
-
+
+
-
+
-
+
Stack/Sort
Page Layout
Stack/Sort
Stack
Off(1 in 1)/
Off
2 in 1/4 in 1(P)/ (1 in 1)
4 in 1(L)
No. of Copies
No. of Copies:01 01
(01-99)
After you finish choosing settings using the Options key, the LCD
shows Press Startand then returns to Menu selections.
Press Black Start or Color Start if you’re finished choosing
settings.
—OR—
Press
or
to select more settings.
MAKING COPIES 11 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Enlarge/Reduce
You can select the following enlargement or reduction ratios.
Customallows you to enter a ratio from 25% to 400%.
Press Options
100%
104%:EXE→LTR
186%:4" × 6"→LTR
200%
Custom(25-400%)
93%:A4→LTR
78%:LGL→LTR
50%
and
or
Enlarge/Reduce
to select
1
Press
(Copy) to illuminate it in green.
2
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
5
Press Options and
Press Menu/Set.
or
to select Enlarge/Reduce.
Press
or
to select the enlargement or reduction ratio
you want.
Press Menu/Set.
—OR—
You can select Customand press Menu/Set.
Use the dial pad to enter an enlargement or reduction ratio from
25%to 400%.
Press Menu/Set.
(For example, press 5 3 to enter 53%.)
Press Black Start or Color Start.
—OR—
6
Press
or
for more settings.
Special Copy Options (2in1 or 4in1) are not available with
Enlarge/Reduce.
11 - 6 MAKING COPIES
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Type
You can change the paper type only for the next copy. Select the
type of media that you are using to get the best print quality.
1
Press
(Copy) to illuminate it in green.
2
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
5
Press Options and
Press Menu/Set.
or
to select Paper Type.
Press
or
to select the type of paper you are using
(Plain, Inkjet, Glossyor Transparency).
Press Menu/Set.
6
If you selected Glossy, press
Glossy:4-Coloror Glossy:3-Color.
or
to select
Press Menu/Set.
The print quality of black ink depends on the type of glossy
paper you are using. Black ink is used when you select
Glossy:4-Color. If the glossy paper you are using repels the
black ink, select Glossy:3-Color, which simulates black ink
by combining the three ink colors.
7
Press Color Start or Black Start.
—OR—
Press
or
for more settings.
You can change the default Paper Type setting at any time.
MAKING COPIES 11 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Size
You can change the paper size setting only for the next copy.
You can copy only on Letter, Legal, and Photo Card
(4"(W)X6"(H)) paper.
1
Press
(Copy) to illuminate it in green.
2
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
5
Press Options and
or
to select Paper Size.
Press Menu/Set.
Press
or
to select the size of paper you are using
(Letter, Legalor 4"(W)×6"(H) ).
Press Menu/Set.
6
Press Black Start or Color Start.
—OR—
Press
Brightness
You can adjust the copy brightness to make copies darker or lighter.
or
for more settings.
1
Press
(Copy) to illuminate it in green.
2
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
5
Press Options and
Press Menu/Set.
or
to select Brightness.
-
+
Press
to make a lighter copy.
—OR—
Press
to make a darker copy.
Press Menu/Set.
6
Press Black Start or Color Start.
—OR—
Press
or
for more settings.
11 - 8 MAKING COPIES
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast
You can adjust the copy contrast to help an image look sharper and
more vivid.
1
Press
(Copy) to illuminate it in green.
2
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
5
Press Options and
Press Menu/Set.
or
to select Contrast.
-
+
Press
to decrease the
contrast.
—OR—
Press
to increase the contrast.
Press Menu/Set.
6
Press Black Start or Color Start.
—OR—
Press
or
for more settings.
Sorting copies
You can sort multiple copies. Pages will be stacked in the order 123,
123, 123, and so on.
1
Press
(Copy) to illuminate it in green.
2
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
5
6
Press Options and
Press Menu/Set.
or
to select Stack/Sort.
Press
or
to select Sort.
Press Menu/Set.
Press Black Start or Color Start.
—OR—
Press
or
for more settings.
MAKING COPIES 11 - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
N in 1 copy (Page Layout)
You can save paper by copying either two or four pages on one
page. If you want to print a poster, use the scanner glass. Please
make sure paper size is set to Letteror Legal.
1
Press
(Copy) to illuminate it in green.
2
3
Load your original. (See Load originals on page 2-1.)
Use the dial pad to enter the number of copies you want
(up to 99).
4
5
Press Options and
or
to select Page Layout.
Press Menu/Set.
Press
or
to select 2 in 1, 4 in 1(P), 4 in 1(L),
(or Off (1 in 1)).
Press Menu/Set.
For FAX-1920C, you cannot select 4 in 1 (P) and 4 in 1(L).
6
Press Black Start or Color Start to scan the original.
(P) means Portrait and (L) means Landscape.
For 2 in 1, 4 in 1 (P) or 4 in 1(L), you cannot use the
Enlarge/Reduce setting.
2 in 1
11 - 10 MAKING COPIES
Download from Www.Somanuals.com. All Manuals Search And Download.
4 in 1 (P) (MFC-3320CN only)
4 in 1 (L) (MFC-3320CN only)
(P)
(L)
If 2 in 1 or 4 in 1 copies are in color, you must use letter or A4
paper. For the other Special Copies, you must use letter, legal
or A4 paper.
If you selected Glossy in the Paper Type setting, 2 in 1 and 4
in 1 copies are not available.
2 in 1 or 4 in 1 copies in color are not available with Multiple
Copies.
For FAX-1920C, 2 in 1 copies in color is not available.
For FAX-1920C, 4 in 1 copies is not available.
MAKING COPIES 11 - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the default copy settings
You can change the default copy settings. These settings will stay
until you change them again.
Copy Quality
1
2
Press Menu/Set, 3, 1.
Press or to select
Normal, Bestor Fast.
1.Quality
Press Menu/Set.
3
Press Stop/Exit.
Brightness
1
2
Press Menu/Set, 3, 2.
2.Brightness
Press
to make a lighter copy.
—OR—
Press
to make a darker copy.
Press Menu/Set.
Press Stop/Exit.
3
Contrast
You can change the contrast to help an image look sharper and more
vivid.
1
2
Press Menu/Set, 3, 3.
3.Contrast
Press
to increase the contrast.
—OR—
Press
to decrease the contrast.
Press Menu/Set.
Press Stop/Exit.
3
11 - 12 MAKING COPIES
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Adjustment
1
2
Press Menu/Set, 3, 4.
Press or to select Red,
Greenor Blue.
4.Color Adjust
Press Menu/Set.
3
4
Press
to increase the color saturation.
—OR—
Press
to decrease the color saturation.
Press Menu/Set.
Return to Step 2 to select the next color.
—OR—
Press Stop/Exit.
MAKING COPIES 11 - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal limitations
Color reproductions of certain originals are illegal and may result in
either criminal or civil liability. This memorandum is intended to be a
guide rather than a complete listing of every possible prohibition. In
case of doubt, we suggest that you check with counsel as to any
particular questionable originals.
The following originals issued by the United States/Canadian
Government or any of its Agencies may not be copied:
■ Paper money
■ Bonds or other certificates of indebtedness
■ Certificates of Deposit
■ Internal Revenue Stamps (canceled or uncanceled)
■ Selective Service or draft papers
■ Passports
■ United States/Canadian Postage Stamps (canceled or
uncanceled)
■ Food Stamps
■ Immigration Papers
■ Checks or drafts drawn by Governmental agencies
■ Identifying badges or insignias
Copyrighted works cannot be copied. Sections of a copyrighted work
can be copied for ‘fair use.’ Multiple copies would indicate improper
use.
Works of art should be considered the equivalent of copyrighted
works.
Licenses and Certificates of Title to motor vehicles may not be
copied under certain state/provincial laws.
11 - 14 MAKING COPIES
Download from Www.Somanuals.com. All Manuals Search And Download.
Walk-Up PhotoCapture
Center™
(MFC-3320CN only)
12
Introduction
Your Brother machine includes four media drives (slots) for use with
popular digital camera media: CompactFlash®, SmartMedia®,
Memory Stick® and SD (Secure Digital) Memory card.
CompactFlash®
SmartMedia®
Memory Stick®
SD Card
The PhotoCapture Center™ feature lets you print digital photos from
your digital camera at high resolution to get photo quality printing.
PhotoCapture Center™ requirements
To avoid error conditions, please remember:
■ The DPOF file on the media card must be in a valid format.
■ The image file extension must be .JPG (Other image file
extensions .JPEG, .TIF, .GIF and so on will not be recognized).
■ Walk-up PhotoCaputure Center™ printing must be performed
separately from PhotoCapture Center™ operations using the PC.
(Simultaneous operation is not available.)
■ IBM Microdrive™ is not compatible with the machine.
■ The machine can read up to 999 files in a media card.
■ Use only Smart media cards with a 3.3v voltage rating.
When printing the INDEX or IMAGE, the PhotoCapture Center™
will print all the valid images, even if one or more images have
been corrupted. A portion of the corrupted image may be printed.
WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY) 12 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic flow
Even if your machine is not connected to your computer, you can
print photo directly from the digital camera media. This is the basic
flow of the direct printing operation. For more details information,
please read this chapter from the next page.
1
2
Insert the media card firmly into the media drive (slot).
Press PhotoCapture.
Print the index which shows thumbnails views of photos stored
on your media card. Even if the machine is not connected to the
computer, you can know the individual image number on the
media card.
Press
or
to select Print Indexand then press
Menu/Set.
Press Color Start to start printing index sheet.
4
To print the images, press
Images and then press Menu/Set.
or
to select Print
Enter image number and press Menu/Set.
Press ColorStart to start printing.
You can change the settings for printing images, such as the number
of Copies, Paper Type, Paper & Print Size, Print Quality, Brightness
12 - 2 WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
There are separate slots on your machine, for a CompactFlash®
card, a SmartMedia® card, Memory Stick® and SD Card.
Use only Smart media cards with a 3.3v voltage rating.
Firmly insert the card into the appropriate slot.
SmartMedia®
MemoryStick®
SD Card
CompactFlash®
PhotoCapture key Lights:
■ PhotoCapture light is ON,
the media card is inserted
properly.
■ PhotoCapture light is
OFF, the media card is not
properly inserted.
■ PhotoCapture light is
BLINKING, the media card
is being read or written to.
WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY) 12 - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Do NOT unplug the power cord or remove the media card from
the media drive (slot) while the machine is reading or writing to
the card (the PhotoCapture key is blinking). You will lose
your data or damage the card.
The machine can only read one Media card at a time so do not insert
more than one card. The settings that you want to use with the card
will be kept until you take out the media card from the drive (slot),
print images or press Stop/Exit.
1
2
Insert the media card firmly into the media drive (slot).
When you insert your media card
into the proper slot, the LCD shows.
C.Flash Active
Press PhotoCapture key...
The media active message will be shown for 60 seconds and
then disappear. Even in that case, you can enter the
PhotoCapture mode by pressing PhotoCapture.
3
Press PhotoCapture.
The LCD shows:
Photo:Select ▲▼
Print Index
▲▼
Print Images ▲▼
Select
12 - 4 WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing the Index (Thumbnails)
The PhotoCapture Center™ assigns numbers for images (such as
No.1, No.2, No.3, and so on).
It does not recognize any other numbers or file names that your
digital camera or PC have used to identify the pictures. You can print
a thumbnail page (Index page with 6 or 4 images per line). This will
show all the pictures on the media card.
1
2
Make sure you inserted the media card.
Press
or
to select
Print Index
Print Index.
Press Menu/Set.
3
Press
6 Images/Lineor
4 Images/Line.
or
to select
6 Images/Line
Press Menu/Set.
Index
Index
4 Images/line
6 Images/line
4
Press Color Start to start printing.
Print time for 4 Images/line will be slower than 6 Images/line, but
the quality is better. To print an image, see the next page.
WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY) 12 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing images
Before you can print an individual image, you have to know the
image number.
Print the Index first.
1
2
Make sure you inserted the media card.
Press
or
to choose
Print Images
Print Images.
Press Menu/Set.
If your media card is with DPOF information, the LCD shows
3
Use the dial pad to enter the image
number that you want to be printed
from the Index page (Thumbnails).
No.:1,3,6
Press Menu/Set.
Repeat this step until you have entered all the image numbers
that you want to print.
You can enter all the numbers at one time by using the
key for
a comma or the # key for hyphen.
(For example, Enter 1 3 6 - to print images No.1, No.3 and
No.6. Enter 1#5 to print images No.1 to No.5).
4
After you have selected all the image numbers.
Press Menu/Set again, and go to Step 5.
—OR—
To print without changing any settings, press Color Start.
12 - 6 WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Type & Paper Size
Press or to select the type of paper you are using,
5
(Letter Glossy, 4"X 6" Glossy, Letter Plain,
Letter Inkjetor 4"X 6" Inkjet).
Press Menu/Set.
If you selected Letter, go to Step 6.
If you selected another size, go to Step 7.
—OR—
To print without changing settings, press Color Start.
Print Size
6
If you selected Letter, press
or
to select the print size
(4"X 3", 5"X 3.5", 6"X 4", 7"X 5"or 8"X 6").
Press Menu/Set, and go to Step 7.
—OR—
To print without changing settings, press Color Start.
Printed Position
1
4"X 3"
2
5"X 3.5"
3
6"X 4"
4
7"X 5"
5
8"X 6"
Number of Copies
7
8
Use the dial pad to enter the number of copies you want.
Press Menu/Set.
Press Color Start to print.
WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY) 12 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
DPOF printing
DPOF stands for Digital Print Order Format.
Major Digital Camera manufacturers (Canon Inc., Eastman Kodak
Company, Fuji Photo Film Co. Ltd. and Matsushita Electric Industrial
Co., Ltd. and Sony Corporation.) created this standard to make it
easier to print images from a digital camera.
If your digital camera supports DPOF printing, you will be able to
select on the Digital Camera display the images and number of
copies you want to print.
When the memory card (CompactFlash®, SmartMedia® or Memory
Stick® or SecureDigital) with DPOF information is put into your
machine, you can print the selected image easily.
1
Insert your media card into the
proper drive (slot).
C.Flash Active
The media active message will be shown for 60 seconds and
then disappear. Even in that case, you can enter the
PhotoCapture mode by pressing PhotoCapture.
2
3
Press PhotoCapture.
Press
or
to select Print Imagesto select individual
images.
Press Menu/Set.
4
5
If there is a DPOF file on the card,
the LCD shows:
DPOF Print:Yes
DPOF Print:No
Press
or
to select DPOF
Print:Yes.
Press Menu/Set.
If you want to print an Index (thumbnails) or choose the images
and their print options now, select DPOF Print:No.
6
Press Color Start to print.
12 - 8 WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the default settings
You can adjust the Print Quality, Paper & Print Size, Brightness,
Contrast, True2Life® and Cropping settings, that are shown in the
chart. These settings will remain set until you change them again.
Press Menu/Set, 4, followed by the number of the setting you want
to change. (See details on the following pages.)
Print Quality
1
2
Press Menu/Set, 4, 1.
Press or to select
Normal, Fineor Photo.
1.Print Quality
Press Menu/Set.
3
Press Stop/Exit.
Paper & Size
1
2
Press Menu/Set, 4, 2.
Press or to select
Letter Glossy, 4"X 6" Glossy, Letter Plain,
2.Paper & Size
Letter Inkjetor 4"X 6" Inkjet.
Press Menu/Set.
3
4
If you selected Letter, press
(4"X 3", 5"X 3.5", 6"X 4", 7"X 5"or 8"X 6").
or
to select the print size
Press Menu/Set.
Press Stop/Exit.
WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY) 12 - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness
1
2
Press Menu/Set, 4, 3.
3.Brightness
Press
to make a lighter print.
—OR—
Press
to make a darker print.
Press Menu/Set.
Press Stop/Exit.
3
Contrast
You can choose the contrast setting. More Contrast will make an
image look sharper and more vivid.
1
2
Press Menu/Set, 4, 4.
4.Contrast
Press
to increase the contrast.
—OR—
Press
to decrease the contrast.
Press Menu/Set.
Press Stop/Exit.
3
12 - 10 WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color enhancement (True2Life®)
You can turn on the color enhancement (True2Life®) feature to print
more vivid images.
1
2
Press Menu/Set, 4, 5.
5.True2Life
Press
or
to select On(or
Off).
Press Menu/Set.
If you select On, you can customize the White Balance,
Sharpness or Color Density.
3
If you selected On,
Press
or
to select White Balance.
Press Menu/Set.
—OR—
To skip the White Balance.
Press
Press
or
or
to select Sharpnessor Color Density.
4
5
to adjust the degree of White Balance.
Press Menu/Set.
Repeat Step 4 and Step 5 to adjust the degree of Sharpness
and Color Density.
—OR—
Press Stop/Exit.
■ White Balance
This setting adjusts the hue of the white areas of an image.
Lighting, Camera settings and other influences will effect the
appearance of white. The white areas of a picture may be slightly
pink, yellow or some other color. By using this adjustment you
can correct this effect and bring the white areas back to pure
white.
WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY) 12 - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Sharpness
This setting enhances the detail of an image. It is similar to
adjusting the fine focus on a camera. If the image is not in true
focus and you cannot see the fine details of the picture, then
adjust the sharpness.
■ Color Density
This setting adjusts the total amount of color in the image. You
can increase or decrease the amount of color in an image to
improve a washed out or weak picture.
Cropping
If your photo is too long or wide to fit the available space on your
selected layout, part of the image will be automatically cropped.
The default setting is On. If you want to print whole image, turn this
setting to Off.
1
2
Press Menu/Set, 4, 6.
Press or to select Off(or On).
Press Menu/Set.
12 - 12 WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY)
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you’re using the PhotoCapture Center™, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the machine will beep
to get your attention.
Media Error—This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
No File—This message will appear if you try to access the media
card in the drive (slot) does not contain a .JPG file.
Out Of Memory—This message will appear if you are working with
images that are too large for the machine’s memory.
Unsupported Card—This message will appear if you insert a
media card that is not supported.
Using PhotoCapture Center™ from
your PC
You can access the media card that is in the media drive (slot) of the
machine from your PC.
See Using PhotoCapture Center™ from your PC. (See Using the
PhotoCapture Center™ from your PC on page 7-1 in Software User’s
Guide on the CD-ROM or Using the PhotoCapture Center™ from a
Macintosh® (MFC-3320CN and MFC-3820CN only) on page 9-23 in
Software User’s Guide on the CD-ROM.)
Using PhotoCapture Center™ for
scanning originals
You can scan the originals into a media card. (See Scan to Card
(MFC-3320CN and MFC-3820CN only) on page 2-22 in Software
User’s Guide on the CD-ROM.)
WALK-UP PHOTOCAPTURE CENTER™ (MFC-3320CN ONLY) 12 - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Important information
13
Standard telephone and FCC Notices
These notices are in effect on models sold and
used in the United States only.
(FAX-1920CN only) This equipment is hearing-aid compatible.
When programming emergency numbers or making test calls to
emergency numbers:
■ Remain on the line and briefly explain to the dispatcher the
reason for the call before hanging up.
■ Perform these activities in the off-peak hours, such as early
morning or late evening.
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the backside of this
equipment is a label that contains, among other information, a
product identifier in the format US: AAAEQ##TXXXX. If requested,
this number must be provided to the telephone company.
You may safely connect this equipment to the telephone line by
means of a standard modular jack, USOC RJ11C.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable FCC
Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line
may result in the devices not ringing in response to an incoming call.
In most but not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be connected
to a line, as determined by the total RENs, contact the local
telephone company. For products approved after July 23, 2001, the
REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXX.The digits represented by ## are the
REN without a decimal point (e.g., 06 is a REN of 0.6). For earlier
products, the REN is separately shown on the label.
13 - 1 IMPORTANT INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice
isn’t practical, the telephone company will notify the customer as
soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities,
equipment, operations or procedures that could affect the operation
of the equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty
telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or
corporation commission for information.
If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this equipment does not
disable your alarm equipment. If you have questions about what will
disable alarm equipment, call your telephone company or a qualified
installer.
If you are not able to solve a problem with your machine, call Brother
WARNING
For protection against the risk of electrical shock, always disconnect
all cables from the wall outlet before servicing, modifying or installing
the equipment.
This equipment may not be used on coin service lines provided by
the telephone company or connected to party lines.
Brother cannot accept any financial or other responsibilities that may
be the result of your use of this information, including direct, special
or consequential damages. There are no warranties extended or
granted by this original.
IMPORTANT INFORMATION 13 - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
This machine has been certified to comply with FCC standards,
which are applied to the USA only. A grounded plug should be
plugged into a grounded AC outlet after checking the rating of the
local power supply for the machine to operate properly and safely.
Federal Communications Commission (FCC)
Declaration of Conformity (USA only)
Responsible Party: Brother International Corporation
100 Somerset Corporate Boulevard
Bridgewater, NJ 08807-0911 USA
TEL: (908) 704-1700
declares, that the products
Product Name: FAX-1920CN and MFC-3320CN
comply with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
■ Call the dealer or an experienced radio/TV technician for help.
13 - 3 IMPORTANT INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Important
Changes or modifications not expressly approved by Brother
Industries, Ltd. could void the user’s authority to operate the
equipment.
Industry Canada Compliance Statement
(Canada only)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
LAN connection
Caution
Caution:
Do not connect this product to a LAN connection that is subject to
over-voltages.
International ENERGY STAR® Compliance Statement
®
The purpose of the International ENERGY STAR Program is to
promote the development and popularization of energy-efficient
office equipment.
®
As an ENERGY STAR Partner, Brother Industries, Ltd. has determined
®
that this product meets the ENERGY STAR guidelines for energy
efficiency.
IMPORTANT INFORMATION 13 - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety instructions
1
2
3
4
Read all of these instructions.
Save them for later reference.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not
use liquid or aerosol cleaners. Use a damp cloth for cleaning.
5
6
Do not use this product near water.
Do not place this product on an unstable cart, stand, or table.
The product may fall, causing serious damage to the product.
7
Slots and openings in the cabinet and the back or bottom are
provided for ventilation; to ensure reliable operation of the
product and to protect it from overheating, these openings must
not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or
over a radiator or heater. This product should never be placed
in a built-in installation unless proper ventilation is provided.
8
9
This product should be operated from the type of power source
indicated on the label. If you are not sure of the type of power
available, call your dealer or local power company.
Use only the power cord supplied with this machine.
This product is equipped with a 3-wire grounded plug, a plug
having a third (grounded) pin. This plug will only fit into a
grounded power outlet. This is a safety feature. If you are unable
to insert the plug into the outlet, call your electrician to replace
your obsolete outlet. Do not defeat the purpose of the grounded
plug.
10 Do not allow anything to rest on the power cord. Do not place
this product where people can walk on the cord.
11 If an extension cord is used with this product, make sure that the
total ampere ratings on the products plugged into the extension
cord do not exceed the extension cord ampere rating. Also,
make sure that the total of all products plugged into the AC
power outlet does not exceed 15 amperes (USA only).
13 - 5 IMPORTANT INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Do not place anything in front of the machine that will block
received faxes. Do not place anything in the path of received
faxes.
13 Wait until pages have exited the machine before picking them
up.
14 Never push objects of any kind into this product through cabinet
slots, since they may touch dangerous voltage points or short
out parts resulting in the risk of fire or electric shock. Never spill
liquid of any kind on the product. Do not attempt to service this
product yourself because opening or removing covers may
expose you to dangerous voltage points and other risks and
may void your warranty. Refer all servicing to a Brother
Authorized Service Center. For the location of your nearest
Brother Authorized Service Center, please call In USA:
15 Unplug this product from the AC power outlet and refer servicing
to Authorized Service Personnel under the following conditions:
■ When the power cord is damaged or frayed.
■ If liquid has been spilled into the product.
■ If the product has been exposed to rain or water.
■ If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require
extensive work by a qualified technician to restore the
product to normal operation.
■ If the product has been dropped or the cabinet has been
damaged.
■ If the product exhibits a distinct change in performance,
indicating a need for service.
16 To protect your product against power surges, we recommend
the use of a power protection device (Surge Protector).
IMPORTANT INFORMATION 13 - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International
Corporation.
© Copyright 2003 Brother Industries, Ltd. All rights reserved.
Windows and Microsoft are registered trademarks of Microsoft in the
U.S. and other countries.
Macintosh is a registered trademark of Apple Computer, Inc.
PaperPort and TextBridge are registered trademarks of ScanSoft, Inc.
Presto! PageManager is a registered trademark of NewSoft
Technology Corporation.
Microdrive is a trademark of International Business Machine
Corporation.
SmartMedia is a registered trademark of Toshiba Corporation.
CompactFlash is a registered trademark of ScanDisk Corporation.
Memory Stick is a registered trademark of Sony Corporation.
MagicGate is a trademark of Sony Corporation.
Each company whose software title is mentioned in this manual has
a Software License Agreement specific to its proprietary programs.
All other brand and product names mentioned in this User’s
Guide, the Software User’s Guide, and the Network User’s
Guide are registered trademarks of their respective companies.
13 - 7 IMPORTANT INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshootingandroutine
maintenance
14
Troubleshooting
IMPORTANT
For technical help, you must call the country where you bought the
machine. Calls must be made from within that country.
Error messages
As with any sophisticated office product, errors may occur. If this
happens, your machine identifies the problem and displays an error
message. The most common error messages are shown below.
You can correct most problems by yourself. If you need additional
help, call the Brother fax back system (USA only).
In USA only: 1-800-521-2846
ERROR MESSAGES
ERROR
CAUSE
ACTION
MESSAGE
Check
Cartridge
An ink cartridge is not properly installed.
Take out the ink cartridge and put it
in again seating it properly.
Check
Original
The original was longer than about 35.4
inches.
Check Paper
Size
Paper is not the correct size.
Reload the correct size of paper
(Letter or Legal), and then press
Black Start or Color Start.
Check Paper
Comm.Error
The machine is out of paper.
Add paper, and then press Black
Start or Color Start.
The paper is jammed in the machine.
Poor phone line quality caused a
communication error.
Try the call again. If the problem
continues, call the telephone
company and ask them to check
your phone line.
Connection
Fail
You tried to poll a fax machine that is not in
Polled Waiting mode.
Check the other fax machine’s
polling setup.
Cover Open
Control panel cover or top cover is not closed Open, then close the covers.
completely.
Disconnected
The other person or other person’s fax
machine stopped the call.
Try to send or receive again.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
ERROR MESSAGES
ERROR
CAUSE
ACTION
MESSAGE
Data Remains
Print data remains in the machine’s memory. Re-start printing from your
computer.
Print data remains in the machine’s memory. Press Stop/Exit. The machine will
The USB cable was unplugged while the
computer was sending the data to the
machine.
cancel the job and eject the page
that is being printed.
DR Mode in
Use
The machine is set to Distinctive Ring mode. Set Distinctive Ring to Off.
You can not change the Receive Mode from
Manual to another mode.
High
Temperature
The print heads are too warm.
Allow the machine to cool down.
Ink Empty
One or more of the ink cartridges is empty.
The machine will stop all print operations.
While memory is available, black and white
faxes will be received into memory. If a
sending machine has a color fax, the
machine’s ‘handshake’ will request that the
fax be sent as black and white. If the sending
machine has the ability to convert it, the color
fax will be received into memory as a black
and white fax.
Replace the ink cartridges.
Insert
Original
The original was not inserted properly.
Allow the machine to warm up.
Call Brother Customer Service.
Low
Temperature
The print heads are too cold.
MachineError The machine has a mechanical problem.
XX
In USA:
1-800-284-4329
In Canada: 1-877-BROTHER
In Montreal: (514) 685-6464
Media Error
(MFC-3320CN
only)
The media card is either bad or not formatted. Reinsert the correct media card.
Near Empty
One or more of the ink cartridges are running Order a new ink cartridge.
out of ink. If a sending machine has a color
fax, the machine’s ‘handshake’ will request
that the fax be sent as black and white. If the
sending machine has the ability to convert it,
the color fax will be received into memory as
a black and white fax.
No File
The media card in the media drive does not
contain a .JPG file.
Reinsert the correct media card.
No Response/
Busy
The number you dialed does not answer or is Verify the number and try again.
busy.
14 - 2 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
ERROR MESSAGES
ERROR
CAUSE
ACTION
MESSAGE
Not
Registered
You tried to access a One-Touch or
Speed-Dial number that is not programmed.
Set up the One-Touch orSpeed-Dial
page 7-3.)
Out of Memory You can’t store data in the memory.
(May occur when
the machine’s
(Fax sending or copy operation in
process)
Press Stop/Exit and wait until the
other operations in progress finish
and then try again.
used as a printer)
—OR—
Clear the data in the memory. (See
(Printing operation in process)
Reduce print resolution.
—OR—
Clear the data in the memory. (See
Paper Jam
The paper is jammed in the machine.
Unsupported
Card
You inserted a media card that can not be
used.
Reinsert the correct media card.
(MFC-3320CN
only)
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Original jam
If the original is jammed, follow the steps below.
Original is jammed inside the front of the control panel.
1
2
Remove any paper from the ADF that is not jammed.
Pull the jammed original out toward the front of the machine.
3
Press Stop/Exit.
Original is jammed inside the back of the control panel.
1
2
3
Remove any paper from the ADF that is not jammed.
Open the control panel cover.
Pull the jammed original out toward the back of the machine.
Control Panel Cover
4
Close the control panel cover.
14 - 4 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer jam or paper jam
Remove the jammed paper depending on where it is jammed in the
machine.
Paper is jammed inside the front of the machine.
1
Pull the paper toward you.
Paper is jammed in the paper tray
1
Remove any paper from the paper tray that is not jammed.
Paper Tray
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Pull up the jammed paper to remove it.
If it is difficult to pull the jammed paper, try to pull it while holding
down the Paper Release Lever.
Paper Release Lever
Paper is jammed inside the paper tray
Pull the paper tray out of the machine.
1
Paper Tray
14 - 6 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Pull up the jammed paper to remove it.
Jammed paper
Paper is jammed inside the machine.
1
2
Open the control panel cover by lifting it toward you, and then lift
the top cover toward the back.
Remove the jammed paper.
If the jammed paper is under the Print Head, unplug the
machine, and then you can move the Print Head to remove the
paper.
3
Close top cover and the control panel cover.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are having difficulty with your machine
If you think there is a problem with your machine or the way your
faxes look, make a copy first. If the copy looks good, the problem is
probably not your machine. Check the chart below and follow the
troubleshooting tips.
DIFFICULTY
SUGGESTIONS
Printing or Receiving Faxes
Condensed print and white
This can be caused by static or interference on the telephone line. You
streaks across the page or the can make a copy using the Black Start key to see if the same problem
top and bottom of sentences
are cut off.
occurs. If the copy looks bad, call Brother Customer Service at
1-800-284-4329 (in USA), 1-877-BROTHER (in Canada) or
(514) 685-6464 (in Montreal).
Poor quality print.
Make sure the Printer Driver or Paper Type setting in the menu matches
the type of paper you are using. (See Media Type on page 1-6 in
page 4-6.) If you are using plain paper, try using the types of
Smudged stain at the top
center of the printed page.
Printing is too dark or too light. Make sure your ink cartridges are fresh. Cartridges are good for up to
two years, after that the ink may become clogged. Cartridge expiration
dates are printed on the package. Make sure the Printer Driver matches
the type of paper you are using. (See Media Type on page 1-6 in
Software User’s Guide on the CD-ROM.) Try using the recommended
environment for your machine is between 68°F to 91°F.
Printing appears dirty or ink
seems to run.
on page 2-3.) Don’t handle the paper until the ink is dry.
The recommended environment for your machine is between 68°F to
91°F.
White horizontal lines appear
in text or graphics.
Stains appear on the reverse
side or at the bottom of the
page
Vertical black lines when
receiving.
The sender’s scanner may be dirty. Ask the sender to make a copy to
see if the problem is on with the sending machine. Try receiving from
another fax machine.
If the problem continues, call Brother Customer Service at
1-800-284-4329 (in USA), 1-877-BROTHER (in Canada) or
(514) 685-6464 (in Montreal).
Received color fax prints only
in black and white.
Replace the color ink cartridges that are empty or nearly empty, and
14 - 8 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
DIFFICULTY
SUGGESTIONS
Phone Line or Connections
The machine does not answer Make sure the machine is in the correct receiving mode for your setup.
when called.
possible, call your machine to hear it answer. If there is still no answer,
check the telephone line cord connection. If there is no ringing when you
call your machine, ask your telephone company to check the line.
Sending Faxes
Poor sending quality.
Try changing your resolution to Fineor S.Fine. Make a copy to check
your machine’s scanner operation.
Transmission Verification
Report says ‘Result:NG’ or
‘Result:ERROR’.
There is probably temporary noise or static on the line. Try sending the
fax again. If you send a PC FAX message and get ‘Result:NG’ or, on the
Transmission Verification Report, your machine may be out of memory.
continues, ask the telephone company to check your phone line.
Vertical black lines when
sending.
If the copy you made shows the same problem, your scanner is dirty.
Handling Incoming Calls
machine ‘Hears’ Voice as
CNG Tone.
If your machine is set to Easy Receive On, it is more sensitive to sounds.
Your machine may mistakenly interpret certain voices or music on the
line as a calling fax machine and respond with fax receiving tones.
Deactivate the fax by pressing Stop/Exit. Try avoiding this problem by
Sending a Fax Call to the
machine.
If you answered at the machine, press Black Start and hang up
immediately. If you answered on an extension phone, press your Fax
Receive Code (default setting is ( 51). When your machine answers,
hang up.
Custom features on a single
line.
If you have Call Waiting/Caller ID with the MFC-3320CN, or Call
Waiting, Ring Master, Voice Mail, an alarm system or any other custom
feature on a single phone line with your machine, it may create a
problem sending or receiving fax data.
For example: If you are sending or receiving a fax message while a
custom feature signal comes through on the line, the signal can
temporarily interrupt or disrupt the fax data. Brother’s ECM feature
should help overcome this problem. This condition is related to the
telephone system industry and is common to all devices that send and
receive data on a single, shared line with custom features. If avoiding a
slight interruption is crucial to your business, we recommend a separate
phone line with no custom features.
Printer Difficulties (MFC-3320CN only)
Horizontal lines appear in text Clean the print head. (See Cleaning the print head on page 14-11.) If
or graphics.
you clean the print heads five times and the print has not improved, call
Brother Customer Service at 1-800-284-4329 (in USA),
1-877-BROTHER (in Canada) or (514) 685-6464 (in Montreal).
Scanning Difficulties (MFC-3320CN only)
TWAIN errors appear while
scanning.
Make sure the Brother TWAIN driver is selected as the primary source.
In PaperPort, click Scan in the File menu and select the Brother TWAIN
driver.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
DIFFICULTY
SUGGESTIONS
Software Difficulties (MFC-3320CN only)
Cannot perform ‘2 in 1 or 4 in 1’ Check that the paper size setting in the application and in the printer
printing.
driver are the same.
Cannot print when using Paint Try setting the Display setting to ‘256 colors.’
Brush.
Cannot print when using
Adobe Illustrator.
Try to reduce the print resolution.
Thick lines and thin lines
1. Open the ‘Basic’ tab in the printer driver.
appear alternately. (banding)
2. Click ‘Setting’ in the Basic tab of the printer driver.
3. Turn Off‘Bi-Directional Printing’ by un-checking it.
(See Bi-Directional Printing on page 1-7 in Software User’s Guide on the
CD-ROM.)
There are some dense lines.
Printing is slow.
Check ‘Reverse Order’ in the Basic tab of the printer driver.
In the ‘Color’ tab from the ‘Advanced’ tab in the printer driver, uncheck
the Color Enhancement.
True2Life® is not working
properly.
If the image data is not full color in your application (Such as 256 color),
True2Life® will not work. Please use at least 24 bit color data with the
True2Life® feature.
‘MFC is Busy’ or ‘MFC
Connect Failure’ Error
Message appears.
Make sure the machine is not showing an error message on the LCD.
‘MFC Connect Failure’
If the MFC is not connected to your PC and you have loaded the Brother
software, the PC will show 'MFC Connect Failure' each time you restart
Windows®. You can ignore this message or you can turn it off as follows.
Double-click "\tool\warnOff.REG" from the supplied CD-ROM.
The Scan key on the MFC's control panel will not work unless you restart
your PC with the MFC connected.
To turn it back on, Double-click "\tool\WarnOn.REG" from the supplied
CD-ROM.
PhotoCapture Center™ Difficulties (MFC-3320CN only)
Removable Disk does not
work properly.
a)Have you installed the Windows® 2000 update?
If not, do the following:
1. Disconnect the USB cable.
2. Install the Windows 2000® update. Please see the Quick Setup
Guide. After the installation the PC will be automatically restarted.
3. Wait about 1 minute after you reboot the PC, and then connect the
USB cable.
b)Take out the media card and put it back in again.
c)If you have tried "Eject", you must take out the media card before you
continue.
d)If an error message appears when you try to eject the media card, it
means the card is being accessed.
Wait a while and then try again.
e)If all of the above do not work, please turn off your PC and machine,
and then turn them on again.
(You will have to unplug the power cord of the machine to turn it off.)
Network Difficulties
I cannot print over the Network Make sure that your machine is powered on and is On Line and in
Ready mode. Press the Test switch. Then the current settings of the
network are printed.Verify that the cabling and Network connections are
good. If possible, try connecting the machine to a different port on your
hub using a different cable.
14 - 10 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
How to improve print quality
Cleaning the print head
To ensure good print quality, the machine will regularly clean the
print head. You can start the cleaning process when needed.
Clean the print head and ink cartridges if you get a horizontal line in
the text or graphics on your printed pages. You can clean two colors
at a time (Black/Cyan, Yellow/Magenta), or all four colors at once.
Cleaning the print head consumes ink. Cleaning too often uses ink
unnecessarily.
WARNING
Do NOT clean the print head by touching it with your hand or a
cloth.
1
2
Press Ink.
Press
or
to select Cleaning.
Press Menu/Set.
Press or
Press Menu/Set.
3
to select the color you want to clean.
The machine will clean the print head. When cleaning is
finished, the machine will go back standby mode automatically.
If you clean the print head at least five times and the print has
not improved, call Brother your dealer for service.
Print Quality Check
If the print quality is not good, you can print a Print Quality Check
Sheet to help you find the settings you may need to change.
1
2
Press Menu/Set, 4.
Press Color Start.
The machine begins printing the
Print Quality Check Sheet.
4.Test Print
3
Check the sheet to see if the quality and alignment are OK by
following STEPs A and B.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP A: Color block quality check
The LCD shows:
Is Step “A” OK?
1.Yes 2.No
4
5
Check the quality of the four color
blocks on the sheet. (Black/Cyan/Yellow/Magenta).
If all lines are clear and visible, press 1 (Yes) to go to STEP B.
—OR—
If you can see missing short lines as shown below, press 2 (No).
OK
Poor
The LCD will ask you if the print
quality is OK for each color.
Black OK?
1.Yes 2.No
6
Press 2 (No) for any color with a
problem.
The LCD shows:
Press 1 (Yes). The machine will
start cleaning the colors.
Start Cleaning?
1.Yes 2.No
7
8
After cleaning is finished, press Black Start or Color Start.
The machine will start printing the Print Quality Check Sheet
again and then return to STEP A.
If STEP A is OK, press 1 to proceed to STEP B.
14 - 12 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP B: Alignment Check
The LCD shows:
Is Step “B” OK?
1.Yes 2.No
9
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely matches number 0. If the
number 5 sample of both the 600 dpi and 1200 dpi are the best
matches, press 1 (Yes) to finish STEP B.
—OR—
If another test print number is a better match for either 600 dpi
or 1200 dpi, press 2 (No) to select it.
10 For 600 dpi, press the number of the
test print that most closely matches
the number 0 sample (1-8).
600dpi Adjust
Select Best #
11 For 1200 dpi, press the number of
the test print that most closely
matches the number 0 sample
(1-8).
1200dpi Adjust
Select Best #
12 Repeat Steps 1 and 2 (in Print Quality Check) to print another
sample Print Quality Check Sheet and then check it.
13 Press Stop/Exit.
When an ink head nozzle is
clogged the printed sample
looks like this.
After the ink head nozzle is
cleaned, the horizontal lines
are gone.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
If you still see missing ink in this Print Quality Check Sheet, repeat
the cleaning and test print procedures at least five times. If ink is still
missing after the fifth cleaning and test print, replace the ink cartridge
for the clogged color. (Perhaps the ink cartridge was in your machine
over six months or the expiration date written on the cartridge
package has passed. Or, the ink may not have been stored properly
before use.)
After replacing the ink cartridge, check it by printing another Print
Quality Check Sheet. If the problem still exists, repeat the cleaning
and test print procedures at least five times for the new ink cartridge.
If ink is still missing, call your Brother Customer Service. (See
Caution
Do NOT touch the print head. Touching the print heads may cause
permanent damage and may void the print head’s warranty.
Checking the ink volume
You can check the ink that is left in the cartridge.
1
2
Press Ink.
Press
Ink Volume.
or
to select
Ink Volume
Bk:-
Press Menu/Set.
Press
color you want to check.
The LCD shows the ink volume.
Press Stop/Exit.
3
4
or
to select the
+
14 - 14 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing and shipping the machine
Whenever you transport the machine, use the packing materials that
came with your machine. If you do not pack the machine properly,
you could void your warranty.
Caution
Do NOT unplug the machine after a print job until you hear the final
click.
1
First, remove all the ink cartridges and attach the white shipping
attaching the white shipping cover, press all the ink cartridge
covers down.
To attach the white shipping cover
Caution
If you are not able to find the shipping cover, do NOT remove the ink
cartridges before shipping. It is essential that the machine be
shipped with either the shipping cover or the ink cartridges in
position. Shipping without them will cause damage to your machine
and may void your warranty.
2
Unplug the machine from the telephone wall jack and remove
the telephone line cord from machine.
3
4
Unplug the machine from the AC outlet.
Unplug the USB cable from the machine, if it is connected.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Attach the yellow protective bar.
ProtectiveYellow Bar
6
7
Remove the paper tray and output paper support, ADF
Document Output support and ADF Document support. If your
machine is a fax model, remove the handset and handset curled
cord.
If you are packing the machine for the Brother Exchange
Service, keep these items and return only the machine.
Wrap the machine in the bag and place it in the original carton
with the original packing material.
14 - 16 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Pack the printed materials in the original carton as shown below.
Do not pack the used ink cartridges in the carton.
If you are returning your machine to Brother as part of the
Exchange Service, pack only the machine. Keep all separate
parts and printed materials to use with your “Exchange”
machine.
9
Close the carton.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine maintenance
Cleaning the scanner
Unplug the machine, and then open the control panel cover. Clean
the flat white pressure bar and the glass strip below the bar with
isopropyl alcohol on a lint-free cloth.
White Bar
Glass Strip
Cleaning the machine printer platen
WARNING
■ Be sure to unplug the machine from the AC power outlet before
cleaning the printer platen.
■ Be careful not to touch the paper feed star wheels, flat cable and
encode film.
■ When you want to clean your machine printer platen, wipe it with
a lint free cloth that is dry.
Paper Feed Star Wheel
Encode Film
Do NOT Touch!
Do NOT Touch!
Flat Cable
Do NOT Touch!
Clean Here
14 - 18 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the ink cartridges
Your machine is equipped with an ink dot counter that automatically
monitors the ink level in each color cartridge. When the counter
detects an ink cartridge is running out of ink, the machine will notify
you with a message on the LCD.
The LCD shows you which color cartridges are low or empty. Be sure
to follow the LCD prompts so you replace the color cartridges in the
appropriate order.
When the ink cartridges are running low, you must use the Ink
key to begin the cartridge replacement (Steps 1 to 3). If the ink
is empty, skip to Step 3.
1
2
Press Ink.
Press
or
to select Replace Ink.
Press Menu/Set.
If one or more ink cartridges are empty, for example Black, the
LCD shows Pls Open Cover.
3
4
Open the control panel cover, and then lift the top cover.
Push the appropriate colored ink cartridge covers and remove
the used ink cartridge.
USH
PUSH
PUSH
PUSH
Ink Cartridge Covers
5
Open the new ink cartridge bag for the color shown on the LCD,
and then take out the ink cartridge.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Hold the new ink cartridge as shown in the illustration, and then
peel the sealing tape from the side of the ink cartridge.
Carefully peel the tape in the direction away from you.
Peel in the direction
away from you!
Opening
To prevent spilling ink and staining your hands and clothing,
remove the sealing tape gently.
7
8
Each color has its own correct position. Insert each new ink
cartridge into the carriage.
After installing the ink cartridges, close the top cover and control
panel cover. Your machine prepares for a “head cleaning” and
goes online.
The LCD prompts you to verify that you removed the ink
cartridge for each color. Example: Have you removed Blck?
1.Yes 2.No.
9
If you removed the ink cartridge, press 1
—OR—
If you did not remove the ink cartridge, press 2.
The LCD prompts you to verify that the ink cartridge was a new
one. Example: Changed to new Blck? 1.Yes 2.No.
10 If the ink cartridge you installed is not a brand new one, please
be sure to press 2.
—OR—
For each new cartridge, press 1 on the dial pad to automatically
reset the ink dot counter for that color. (The ink dot counter
enables the machine to notify you when a color is running low.)
The machine will enter a cleaning cycle for approximately 3
minutes for each replaced cartridge. The LCD alternately shows
Cleaningand Please Wait.
When the machine completes the cleaning cycle, the LCD
returns to Standby mode condition.
14 - 20 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
If ink gets in your eyes, irrigate them with water immediately and call
a doctor if you are concerned.
Caution
■ DO NOT remove ink cartridges if you do not need to replace
them. If you do so, it may reduce the ink quantity and the printer
will not know the quantity of ink left in the cartridge.
■ DO NOT shake the ink cartridges, because the ink may spill when
you take off the sealing tape.
■ If ink stains your body or clothing, wash with soap or detergent
immediately.
■ If you install an ink cartridge in the wrong color position, you must
clean the print head several times before you start printing (after
correcting the cartridge installation) because the colors were
mixed.
■ Once you open an ink cartridge, install it in the machine and use
it up within six months of installation. Use unopened ink
cartridges by the expiration date written on the cartridge
package.
■ Brother strongly recommends that you do not refill the ink
cartridges provided with your machine. We also strongly
recommend that you continue to use only Genuine Brother Brand
replacement ink cartridges. Using or attempting to use potentially
incompatible inks and/or cartridges in your machine may cause
damage to the machine itself and/or it may result in unsatisfactory
print quality. Our warranty coverage does not apply to any
problem that was caused by the use of unauthorized third party
ink and/or cartridges. To protect your investment and guarantee
your print quality please continue to replace consumed ink
cartridges with only Genuine Brother Branded Supplies.
If the Ink Emptymessage is on the display after you have
installed ink cartridges, check that the ink cartridges are
installed properly.
If you still cannot solve a problem with your machine, call Brother
TROUBLESHOOTING AND ROUTINE MAINTENANCE 14 - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
G
ADF (automatic document feeder) The original can be placed in
the ADF and scanned one page at a time automatically.
Auto Reduction Reduces the size of incoming faxes.
Automatic fax transmission (MFC-3320CN only) Sending a fax
without picking up the handset of an external phone.
Automatic fax transmission (FAX-1920CN only) Sending a fax
without picking up the handset of the machine or pressing Hook.
Automatic Redial A feature that enables your machine to redial the
last fax number after five minutes if the fax did not go through
because the line was busy.
Backup Print Your machine prints a copy of every fax that is
received and stored in memory.This is a safety feature so you will
not lose messages during a power failure.
Batch Transmission (Black and white faxes only) As a cost
savings feature, all delayed faxes to the same fax number will be
sent as one transmission.
Brightness Changing the Brightness makes the whole image
lighter or darker.
Beeper Volume Volume setting for the beep when you press a key
or make an error.
Broadcasting The ability to send the same fax message to more
than one location.
Cancel Job Cancels a programmed job, like Delayed Fax or
Polling.
CNG tones The special tones (beeps) sent by fax machines during
automatic transmission to tell the receiving machine that a fax
machine is calling.
Coding method Method of coding the information contained in the
original. All fax machines must use a minimum standard of
Modified Huffman (MH). Your machine is capable of greater
compression methods, Modified Read (MR), Modified Modified
Read (MMR) and JPEG, if the receiving machine has the same
capability.
G - 1 GLOSSARY
Download from Www.Somanuals.com. All Manuals Search And Download.
Communication error (or Comm. Error) An error during fax
sending or receiving, usually caused by line noise or static.
Compatibility group The ability of one fax unit to communicate
with another. Compatibility is assured between ITU-T Groups.
Contrast Setting to compensate for dark or light originals, by
making faxes or copies of dark originals lighter and light originals
darker.
Delayed Fax Sends your fax at a specified later time that day.
Distinctive Ring A subscriber service purchased from the
telephone company that gives you another phone number on an
existing phone line. The Brother machine uses the new number to
simulate a dedicated fax line.
Dual Access Your machine can scan outgoing faxes or scheduled
jobs into memory at the same time it is sending a fax or receiving
or printing an incoming fax.
Easy Receive Enables your machine to respond to CNG tones if
you interrupt a fax call by answering it.
ECM (Error Correction Mode) Detects errors during fax
transmission and resends the pages of the fax that had an error.
Extension phone A telephone on the fax number that is plugged
into a separate wall jack.
External phone A TAD (telephone answering device) or telephone
that is plugged into the EXT jack of the machine.
F/T Ring Time The length of time that the Brother machine rings
(when the Receive Mode setting is Fax/Tel) to notify you to pick
up a voice call that it answered.
Fax Forwarding Sends a fax received into the memory to another
pre-programmed fax number.
Fax Receive Code Press this code ( 5 1) when you answer a fax
call on an extension or external phone.
Fax Storage You can print stored faxes later or retrieve them from
another location using Fax Forwarding or Remote Retrieval
operations.
Fax tones The signals sent by sending and receiving fax machines
while communicating information.
GLOSSARY G - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax/Tel You can receive faxes and telephone calls. Do not use this
mode if you are using a telephone answering device (TAD).
Fine resolution Resolution is 203 × 196 dpi. It is used for small print
and graphs.
Gray scale The shades of gray available for copying and faxing
photographs.
Group number A combination of One-Touch and Speed-Dial
numbers that are stored on a One-Touch key or in a Speed-Dial
location for Broadcasting.
Help list A printout of the complete Menu table that you can use to
program your machine when you do not have the User’s Guide
with you.
Fax Journal Lists information about the last 200 incoming and
outgoing faxes. TX means Transmit. RX means Receive.
Journal Period The pre-programmed time period between
automatically printed Fax Journal Reports. You can print the Fax
Journal on demand without interrupting the cycle.
LCD (liquid crystal display) The display screen on the machine
that shows interactive messages during On-Screen Programming
and shows the date and time when the machine is idle.
Manual fax (MFC-3320CN only) When you lift the handset of your
external telephone or press Hook so you can hear the receiving
fax machine answer before you press Black Start or Color
Start to begin transmission.
Manual fax (FAX-1920CN only) When you lift the handset of the
machine or press Hook so you can hear the receiving fax
machine answer before you press Black Start or Color Start
to begin transmission.
Menu mode Programming mode for changing your machine’s
settings.
MFL-Pro Suite (MFC-3320CN only) Turns your machine into a
printer and a scanner and enables PC faxing using the machine.
OCR (optical character recognition) (MFC-3320CN only) The
bundled ScanSoft® TextBridge® software application converts an
image of text to text you can edit.
G - 3 GLOSSARY
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Touch Keys on the machine’s control panel where you can
store numbers for easy dialing. You can store a second number
on each key if you press Shift and the One-Touch Key together.
Out of Paper Reception Receives faxes into the machine’s
memory when the machine is out of paper.
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Paging Feature enables your machine to call your pager when a fax
is received into its memory.
Pause Allows you to place a 3.5 second delay in the dialing
sequence stored on One-Touch keys and Speed-Dial numbers.
Press Redial/Pause as many times as needed for longer
pauses.
PhotoCapture Center™ Allows you to print digital photos from your
digital camera at high resolution for photo quality printing.
Photo resolution A resolution setting that uses varying shades of
gray for the best representation of photographs.
Polling The process of a fax machine calling another fax machine
to retrieve waiting fax messages.
Pulse A form of rotary dialing on a telephone line.
Quick Dial List A listing of names and numbers stored in
One-Touch and Speed-Dial memory, in numerical order.
Real Time Transmission When memory is full, you can send faxes
in real time.
Remaining jobs You can check which jobs are waiting in memory
and cancel jobs individually.
Remote Access Code Your own four-digit code (--- ) that allows
you to call and access your machine from a remote location.
Remote Retrieval Access The ability to access your machine
remotely from a touch tone phone.
Resolution The number of vertical and horizontal lines per inch.
See: Standard, Fine, Super Fine and Photo.
GLOSSARY G - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Ring Delay The number of rings before the machine answers in
Fax Onlymode.
Ring Volume Volume setting for the machine’s ring.
Scanning The process of sending an electronic image of a paper
original into your computer.
Scan to Card (MFC-3320CN only) You can scan a black and white
or color original into a Media Card. Black and white images will be
in TIFF file format and color images may be in PDF or JPEG file
format.
Search An electronic, alphabetical listing of stored One-Touch,
Speed-Dial and Group numbers.
Speed-Dial A pre-programmed number for easy dialing. You must
press the Search/Speed Dial key and then #, and the two digit
code to start the dialing process.
Standard resolution 203 x 97 dpi. It is used for regular size text
and quickest transmission.
Station ID The stored information that appears on the top of faxed
pages. It includes the sender’s name and fax number.
Super Fine resolution 392 x 203 dpi. Best for very small print and
line art.
TAD (telephone answering device) You can connect an external
device or answering machine to the EXT. jack of the machine.
Telephone Answer Code (Fax/Tel mode only) When the
machine answers a voice call, it pseudo/double-rings. You can
pick up at an extension phone by pressing this code (# 5 1).
Temporary settings You can select certain options for each fax
transmission and copy without changing the default settings.
Tone A form of dialing on the telephone line used for Touch Tone
telephones.
Transmission The process of sending faxes over the phone lines
from your machine to the receiving fax machine.
Transmission Verification Report A listing of each transmission,
that shows its date, time and number.
G - 5 GLOSSARY
Download from Www.Somanuals.com. All Manuals Search And Download.
True2Life® Adjusts the color in the image for better print quality by
improving sharpness, white balance and color density.
User Settings A printed report that shows the current settings of the
machine.
GLOSSARY G - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
S
Product description
General
Memory Capacity
8 MB (FAX-1920CN)
16 MB (MFC-3320CN)
Up to 20 pages
Automatic Document
Feeder (ADF)
Temperature: 68°F - 86°F (20°C - 30°C)
Humidity: 50% - 70%
Paper: 20 lb Letter size
100 Sheets (20 lb)
Paper Tray
Printer Type
Print Method
Ink Jet
Piezo with 75 × 4 nozzles
16 characters × 1 line
LCD (Liquid Crystal
Display)
Power Source
Power Consumption
120V AC 50/60Hz
(FAX-1920CN)
Minimum:
Standby:
Peak:
Under 4 watts
9 W or less (25°C)
32 W or less
(MFC-3320CN)
Minimum:
Standby:
Peak:
Under 5 watts
13 W or less (25°C)
35 W or less
19.7 inch
(493 mm)
Dimensions
17.1 inch
(434 mm)
17.1 inch
(434 mm)
(MFC-3320CN)
(FAX-1920CN)
13.6 inch
(346 mm)
8.3 inch
(211 mm)
14.4 inch
(366 mm)
23 inch
(583 mm)
S - 1 SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Weight
MFC-3320CN: 14.3 lb (6.5 kg)
FAX-1920CN: 15.4 lb (7 kg)
Noise
Operating:
Standby:
48 dB A or less
35 dB A or less
50°F - 95°F
Temperature
Operating:
Best Print
Quality:
68°F - 91°F
Humidity
Operating:
20 to 80% (without condensation)
Best Print
Quality:
20 to 80% (without condensation)
Print media
Paper Input
Paper Tray
■
Paper type:
Plain paper, recycled paper, inkjet paper
(coated paper), glossy paper, transparencies*
and envelopes
■
Paper size:
Letter, Legal, Executive, A4, A5, A6, JIS_B5,
envelopes (commercial No.10, DL, C5,
Monarch, JE4), Photo card, Index card.
■
Maximum paper tray capacity: Approx. 100
sheets of 20 lb plain paper
* Use only transparencies recommended for inkjet
printing.
Paper Output
Up to 50 sheets of Letter plain paper (Face up print
delivery to the output paper support)
For inkjet (coated paper) and transparency, we
recommend removing printed pages from the
output paper support immediately after they exit the
machine to avoid smudging.
Legal paper cannot be stacked on the output paper
support.
SPECIFICATIONS S - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy
Color/Black
Color/Black
Copy Speed
Black
Up to 12 pages/minute (Letter paper)
Color
Up to 10 pages/minute (Letter paper)
Does not include the time it takes to feed the paper.
Based on Brother standard pattern.
Fast mode
Multiple Copies
Enlarge/Reduce
Resolution
Stacks or Sorts up to 99 pages
25% to 400% (in increments of 1%)
Max. 1200 x 1200 dpi
PhotoCapture Center
(MFC-3320CN only)
Available Media
CompactFlash®
(Microdrive™ is not compatible)
(Compact I/O card such as Compact LAN card
and Compact Modem card are not supported.)
SmartMedia® (3.3V)
(Not available for use with ID)
Memory Stick®
(Not available for music data with MagicGate)
SD (Secure Digital) Memory Card
File Extension
(Media Format)
(Image Format)
DPOF, EXIF, DCF
Photo Print: JPEG*, TIFF
Scan to Card: JPEG, PDF (Color)
TIFF, PDF (Black)
* Progressive JPEG format is not available.
True2Life
Color Enhancement
Number of Files
Folder
Up to 999 files in the media card
File must be in the 3rd stratum of the folder of Media
Card
S - 3 SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax
Compatibility
Coding System
Modem Speed
ITU-T Group 3
MH/MR/MMR/JPEG
Automatic Fallback
33600 bps:
Original Size
ADF Width:
ADF Height:
3.5" to 8.5"
5" to 14"
Scanning Width
Printing Width
Gray Scale
8.2 in.
8.03 in.
256 levels
Polling Types
Contrast Control
Standard, Sequential: (Black only)
Automatic/Light/Dark
(manual setting)
Resolution
• Horizontal 203 dot/inch
• Vertical Standard -
98 line/inch (Black)
196 line/inch (Color)
Fine - 196 line/inch (Black/Color)
Photo - 196 line/inch (Black)
Superfine - 392 line/inch (Black)
One-Touch Dial
4 (2 × 2) (FAX-1920CN)
8 (4 × 2) (MFC-3320CN)
Speed-Dial
100 stations
Broadcasting
154 stations (FAX-1920CN)
158 stations (MFC-3320CN)
Automatic Redial
1 time in 5 minutes
Auto Answer
0, 1, 2, 3 or 4 rings
Communication Source
Memory Transmission
Public switched telephone network.
Up to 480*1/400*2 pages (MFC-3320CN)
Up to 480*1/350*2 pages (FAX-1920CN)
Out of Paper Reception
Up to 480*1/400*2 pages (MFC-3320CN)
Up to 480*1/350*2 pages (FAX-1920CN)
*1
*2
“Pages” refers to the “Brother Standard Chart No. 1” (a typical business letter, Standard resolution,
JBIG code). Specifications and printed materials are subject to change without prior notice.
"Pages" refers to the "ITU-T Test Chart #1" (a typical business letter, Standard resolution, JBIG code).
Specifications and printed materials are subject to change without prior notice.
SPECIFICATIONS S - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanner (MFC-3320CN only)
Color/Monochrome
Color/Monochrome
TWAIN Compliant
Yes (Windows® 98/98SE/Me/2000 Professional)
Mac OS® 8.6-9.2/Mac OS® X 10.2.1 or greater
WIA Compliant
Resolution
Yes (Windows® XP)
Up to 2,400 × 2,400 dpi (interpolated)*
Up to 600 × 1,200 dpi (optical)
* Maximum 1200 x 1200 dpi scanning with
Windows® XP (resolution up to 2400 x 2400 dpi
can be selected by using the Brother scanner
utility)
Scanning Speed
Original Size
Color: up to 9 sec. Mono: up to 4 sec.
(* Letter size in 100 × 100 dpi)
ADF Width: 3.5" to 8.5"
ADF Height: 5" to 14"
Scanning Width
Gray Scale
8.26 in.
256 levels
Mac OS® X scanning is supported in Mac OS® X 10.2.1 or
greater.
S - 5 SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer
For FAX-1920CN, you can download the Brother Printer Driver
and PC Fax Driver from the Brother Solutions Center. Visit us at:
Printer Driver
Windows® 98/98SE/Me/2000 Professional and XP
driver supporting Brother Native Compression
mode and bi-directional capability
Apple® Macintosh® QuickDraw® Driver
For Mac OS® 8.6-9.2/Mac OS® X 10.1/10.2.1 or
greater
Resolution
Up to 4800 x 1200 optimized dots per inch (dpi)*
1200 x 1200 dots per inch (dpi)
600 x 600 dots per inch (dpi)
600 x 300 dots per inch (dpi)
600 x 150 dots per inch (dpi)
* Black and White Printing: The MFC prints using
black ink up to 4800 x 1200 optimized dpi when
Photo mode is selected in the printer driver.
* Color Printing: The MFC uses Brother’s
OP Technology to automatically vary the printing
resolution for producing the highest quality output.
Brother’s OP Technology is automatically activated
during color printing using Photo mode and selects
the print resolution appropriate for the printing task
up to 4800 x 1200 optimized dpi when printing on
photo quality paper.
* Output image quality varies based upon many
factors including but not limited to input image
resolution and quality and print media.
Print Speed
up to 14 pages/minute (Mono)*
up to 12 pages/minute (Color)*
* Based on Brother standard pattern.
* Letter size in draft mode.
* Does not include the time it takes to feed the
paper.
Printing Width
8.03 inches (204 mm)
35 TrueType
Disk-Based Fonts
SPECIFICATIONS S - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Interfaces
USB
A Standard Universal Serial Bus cable that is not
longer than 6 feet (2.0m).
Computer requirements
Minimum System Requirements
Computer Platform &
Operating System Version
Processor
Minimum
Speed
Minimum
RAM
Recommended
RAM
Available Hard Disk
Space
Driver
Application
Software*1
Windows®
Operating
System
98, 98SE
Me
Pentium
75MHz
24 MB
32 MB
64 MB
32 MB
64 MB
128 MB
160 MB
100 MB
Pentium
150MHz
2000
Professional
Pentium
133MHz
XP*3
Pentium
233MHz
180 MB
200 MB
Apple®
Mac OS® 8.6- 9.2 All base
32 MB
64 MB
80 MB
Macintosh® (Printing,
models meet
minimum
Requirements
Operating
System
Scanning*4 and
PC-FAX Send
Only)
Mac OS® X
10.1/10.2.1 or
greater
128 MB
160 MB
(Printing*5,
Scanning*2*4,
PC-FAX Send
and Remote
Setup*6 Only)
NOTE: All registered trademarks referenced herein are the property of their respective companies.
For the latest drivers, go to the Brother Solutions Center at http://solutions.brother.com/
*
1 Application Software is different for Windows® and Macintosh®
*2 Scanning is supported in 10.2.1 or greater.
*3 Maximum 1200 x 1200 dpi scanning with Windows® XP.
(Resolutions up to 2400 x 2400 dpi can be selected using the
Brother Scanner Utility.) (MFC-3320CN)
*4 Dedicated “Scan” key and direct Network Scanning not
supported in Mac® Operations System. (MFC-3320CN)
*5 Network printing and PC-FAX sending supported in Mac OS®
X 10.2.4 or greater.
*
6 Network Remote Setup not supported in Mac® Operating System.
S - 7 SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumable items
Ink
Black and 3 individual color ink cartridges separate
from the print heads.
Service Life of Ink
Cartridge
Approximately 500 page/Black cartridge at 5%
coverage
Approximately 400 page/Color cartridge at 5%
coverage with 600 x 150 dpi resolution (Fast).
These numbers are based on consecutive printing;
the numbers will vary based on print frequency and
number of pages.
The machine periodically cleans the print head to
maintain print quality. This process consumes a
small amount of ink.
SPECIFICATIONS S - 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Network (LAN)
You can connect your machine to a network for
Network Printing, Network Scanning and Internet
Fax. Also included is Brother BRAdmin
Professional Network Management software.
Support for:
Windows® 98/Me/2000/XP
Mac OS® 8.6 - 9.2, Mac OS® X 10.1/10.2.4 or greater*
Ethernet 10/100 BASE-TX Auto Negotiation
TCP/IP
RARP, BOOTP, DHCP, APIPA, NetBIOS, WINS
LPR/LPD, Port9100, SMTP/POP3
SSDP, mDNS, FTP
Internet Fax-T37 Simple Mode
SMTP/POP3 E-mail Services are required for
Internet Fax.
* Network Printing and PC-FAX are available for
Mac OS® 8.6-9.2, Mac OS® 10.2.4 or greater.
* Mac OS® 8.6-9.2 (Quick Draw over TCPIP)
* Mac OS® X 10.2.4 or greater (mDNS)
* Network Scanning and Remote Setup are not
available for Mac.
* Media drive is not available for Mac.
Included Utilities:
BRAdmin Professional (Windows®)
BRAdmin Professional is not supported in Mac
OS®.
S - 9 SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
D
F
E
I - 2 INDEX
Download from Www.Somanuals.com. All Manuals Search And Download.
J
L
M
G
H
I
INDEX I - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
O
Q
R
P
I - 4 INDEX
Download from Www.Somanuals.com. All Manuals Search And Download.
S
V
W
T
TAD (telephone answering
INDEX I - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Retrieval Access card (MFC-3320CN only)
If you plan to receive fax messages while away from your machine,
carrying the Remote Retrieval Access Card printed below will serve
as a convenient reminder of the retrieval procedures. Simply cut out
the card and fold it to fit your wallet or organizer. Keeping it handy will
help you derive the full benefit of your machine’s Paging, Fax
Forwarding, and Remote Retrieval features.
ADR
C
CSE
A
TIREVAL
R
MTOE
1
2
4
5
6
3
R
Fold
Fold
REMOTE RETRIEVAL ACCESS CARD (MFC-3320CN ONLY) R - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3
2
1
Fold
Fold
R - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Retrieval Access card (FAX-1920CN only)
If you plan to retrieve voice or fax messages while away from your
machine, carrying the Remote Retrieval Access Card printed below
will serve as a convenient reminder of the retrieval procedures.
Simply cut out the card and fold it to fit in your wallet or organizer.
Keeping it handy will help you derive the full benefit of your
machine’s Paging, Fax Forwarding, and Remote Retrieval features.
REMOTE RETRIEVAL ACCESS CARD (FAX-1920CN ONLY) R - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
R - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT ATTACHMENT LIMITATIONS
(Canada only)
NOTICE
This product meets the applicable Industry Canada technical
specifications.
NOTICE
The Ringer Equivalence Number is an indication of the maximum
number of devices allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the RENs of
all the devices does not exceed five.
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Brother International Corporation
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807–0911 USA
Brother International Corporation (Canada) Ltd.
1 rue Hôtel de Ville,
Dollard-des-Ormeaux, QC, CANADA H9B 3H6
Visit us on the World Wide Web
These machines are made for use in the USA and CANADA only. We cannot recommend
using them overseas because it may violate the Telecommunications Regulations of that
country and the power requirements of your multi-function center may not be compatible
with the power available in foreign countries. Using USA or CANADA models overseas is
at your own risk and may void your warranty.
Version A
Download from Www.Somanuals.com. All Manuals Search And Download.
|