SBG2500-1, SBG2501-1 and SBG2801-1 Gas Grill
Owner’s Manual
GAS-FIRED
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations!
Welcome to the beauty and durability of a Superb by Broilmaster®
Gas Grill.
At Broilmaster, we continually strive to enhance the performance
and quality of our products for your grilling enjoyment. Every ef-
fort will be made to ensure that Broilmaster continues to be your
choice as the grill of the future.
Whether you are at the lake or in the privacy of your own back-
yard, the Superb by Broilmaster® Gas Grill performs far beyond
the ordinary and is designed to provide your family with years of
outdoor cooking pleasure.
Thank You!
Broilmaster® is a registered trademark of
Empire Comfort Systems, Inc.
918 Freeburg Ave.
Belleville, Illinois 62220
Telephone 800-851-3153
SBB00101-1-1007
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Congratulations!
You have chosen the finest grill for your outdoor cooking pleasure. Please take time to read this entire manual before assembling your
Superb by Broilmaster® Gas Grill.
SECTION
PAGE
Hardware Package ..........................................................................................................................................5
Parts View .......................................................................................................................................................6
Parts List .........................................................................................................................................................7
Grill Assembly ................................................................................................................................................8
Cart & Grill Assembly .............................................................................................................................. 9-10
Rotisserie Installation for SBG2501-1 and SBG2801-1......................................................................... 11-12
Propane Gas Grills.................................................................................................................................. 13-14
Gas Conversion to Natural Gas.....................................................................................................................15
Operation................................................................................................................................................. 16-17
Maintenance..................................................................................................................................................18
Troubleshooting ............................................................................................................................................19
Warranty Terms.............................................................................................................................................20
Service Notes .......................................................................................................................................... 21-23
Your Superb by Broilmaster® Gas Grill is identified by model number, serial number, and gas
type. This information is provided on a product identification label located on the grill’s right
side of the cart. For your convenience, complete this section for future reference when contact-
ing your dealer.
Model No.
Dealer
Serial No.
Dealer Phone No.
Date of Purchase
Gas Type: Propane
Natural
Page 4
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE PACKAGE
Lock Washer (48)
3/4” Screw (16)
“AA” Battery (1)
1/2” Screw (34)
1/4” Scew (2)
SBB00101-1-1007
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS VIEW
All repair part orders should be placed through your local Broilmaster® dealer. To locate a dealer in your area, contact Broilmaster Cus-
tion when placing a repair part order: Model Number, Serial Number, Part Name, Part Number, and Quantity of parts needed.
1
2
3
3
4
10
12
5
11
9
7
13
8
6
15
14
23
20
18
50
21
17
23
16
30
29
28
19
22
28
25
24
22
21
24
29
32
31
25
26
33
35
27
37
38
33
34
34
39
40
41
49
36
43
42
45
41
47
44
44
43
48
48
Page 6
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
Index No.
Part Number
SBG2501
SBG2500
SBG2801
Description
1
2
3
4
5
6
7
8
SBB00014
SBB00011
SBB00013
SBB00076
-
SBB00014
SBB00011
SBB00013
SBB00077
SBB00064
SBB00065
SBB00066
SBB00068
SBB00069
SBB00092
SBB00071
SBB00070
SBB00055
SBB00102
SBB00057
SBB00063
SBB00072
SBB00074
SBB00059
SBB00060
SBB00061
SBB00045
SBB00043
SBB00046
SBB00050
SBB00051
SBB00090
SBB00040
SBB00030
SBB00031
SBB00037
SBB00038
SBB00048
SBB00035
SBB00033
SBB00032
SBB00016
SBB00023
SBB00025
SBB00024
SBB00029
SBB00027
SBB00010
SBB00019
SBB00018
SBB00094
SBB00009
SBB00002
SBB00005
SBB00007
B069756
SBB00014
SBB00012
SBB00013
SBB00078
SBB00064
SBB00065
SBB00067
SBB00068
SBB00069
SBB00092
SBB00071
SBB00070
SBB00056
SBB00102
SBB00058
SBB00063
SBB00073
SBB00075
SBB00059
SBB00060
SBB00062
SBB00045
SBB00043
SBB00046
SBB00050
SBB00051
SBB00091
SBB00041
SBB00030
SBB00031
SBB00037
SBB00038
SBB00049
SBB00036
SBB00033
SBB00032
SBB00103
SBB00023
SBB00026
SBB00024
SBB00029
SBB00028
SBB00010
SBB00020
SBB00018
SBB00094
SBB00009
SBB00003
SBB00006
SBB00008
B069756
THERMOMETER
LID
NUT AND LID
WARMING RACK
ROTISSERIE MOTOR
ROTISSERIE MOTOR BRACKET
ROTISSERIE ROD
ROTISSERIE FORKS
ROTISSERIE ROD BUSHING & SCREW
JAMB NUT
ROTISSERIE COUNTERBALANCE
ROTISSERIE ROD HANDLE
COOKING GRATE
-
-
-
-
-
-
-
9
10
11
12
13
14
15
16
17
17
18
19
20
21
22
23
24
25
26
27
28
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
SBB00054
SBB00052
-
FLAME TAMER
ROTISSERIE BURNER BACK COVER
ROTISSERIE THERMOCOUPLE SHIELD
ROTISSERIE ORIFICE LP
ROTISSERIE ORIFICE NAT
ROTISSERIE THERMOCOUPLE
ROTISSERIE ELECTRODE
ROTISSERIE BURNER
SIDE SHELF BRACKET & PIN
SIDE SHELF
CUTTING BOARD
MAIN BURNER ELECTRODE
MAIN BURNER
RADIATION SHIELD
MANIFOLD
MAIN BURNER ORIFICE LP
MAIN BURNER ORIFICE NAT
MAIN BURNER VALVE
ROTISSERIE VALVE
IGNITER
CONTROL PANEL
BEZELS
KNOBS
GREASE TRAY
-
-
-
-
-
-
SBB00044
SBB00042
SBB00046
SBB00050
SBB00051
SBB00089
SBB00039
SBB00030
SBB00031
SBB00037
-
SBB00047
SBB00034
SBB00033
SBB00032
SBB00015
SBB00021
SBB00025
SBB00022
SBB00029
SBB00027
SBB00010
SBB00019
SBB00018
SBB00094
SBB00009
SBB00001
SBB00004
SBB00007
B069756
SBB00106
CART PANEL LEFT
CART BACK PANEL
CART PANEL RIGHT
TANK RING
CART CROSS BEAM
MAGNET
CART BOTTOM
CASTER
LOCKING CASTER
TOWEL HOLDER
DOOR ASSEMBLY LEFT
DOOR ASSEMBLY RIGHT
DOOR HANDLE
HOSE AND REGULATOR
FLAME CARRY OVER
SBB00106
SBB00106
SBB00101-1-1007
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
GRILLASSEMBLY
Before You Begin
Recommended Tools
These items are recommended for the assembly of your grill:
This grill requires some assembly and installation. Follow all
instructions.
If you purchased an accessory with your Superb by Broilmaster®
Gas Grill, follow the instructions provided with the accessory for
assembly and installation. If an instruction refers to a step that is not
required for your grill model, please continue to the next step.
•
•
Phillips screwdriver
Soapy water solution (to test for leaks)
Grill Mountings
Refer to the instructions provided with each accessory for assem-
bly, installation, and mounting procedures.
CAUTION: FOR YOUR SAFETY
Parts may have sharp edges. Wear leather work gloves and
handle parts carefully during the unpacking, assembly and
installation.
Gas Consumption on Grill Burners
Each Main Burner
Rotisserie Burner
Optional Side Burner
HI
LO
12,000 BTU/Hr
6,500 BTU/Hr
8,000 BTU/Hr
SBG2501-1
SBG2801-1 12,000 BTU/Hr
HI
13,000 BTU/Hr
5,750 BTU/Hr
LO
Page 8
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
CART AND GRILLASSEMBLY
1. Place cart bottom face-down on a non-abrasive surface.
8. Place bottom pivot pins on doors into cart bottom and snap
2. Attach two locking casters to front of cart bottom with four (4)
lock washers, and 3/4” screws per locking caster. See Figure
1.
spring-loaded top pivot pins into door brace. See Figure 3.
3. Attach two (2) non-lock casters to back of cart bottom with
four (4) washers, and 3/4” screws per caster. See Figure 1.
Figure 3
10. Place grill head onto cart. Attach grill head to cart from in-
side of the grill with four (4) lock washers, and 1/2” screws.
See Figure 4.
Figure 1
4. Place cart bottom face-up. Lock front casters.
5. Attach cart back to back of cart bottom with two (2) lock
washers and 1/2” panel screws. See Figure 2.
CAUTION: Assure that gas line does not get trapped
under body.
6. Attach cart side panels to cart back with two (2) lock washers
and 1/2” screws per cart side. Then, attach side panels to the
cart bottom with two (2) lock washers and 1/2” screws per
side. See Figure 2.
7. With flange on door brace positioned upward, attach door brace
to cart sides with four (4) 1/2” screws. See Figure 2.
Figure 4
Figure 2
SBB00101-1-1007
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
CART AND GRILLASSEMBLY (cont.)
13. Place flame tamers over burners. Pins on burner box fit through
10. Pull clips off the pin which attaches the side shelf mounting
holes on flame tamer. See Figure 7.
14. Place cooking grids into grill. See Figure 7.
15. Place warming rack on top of grill body side walls. See Figure
7.
bracket to the side shelf and remove pin. Remove brackets
from side shelves. Attach two side shelf brackets to each cart
side with four (4) lock washers and 1/2” screws per side shelf
bracket. See Figure 5.
11. Insert and attach side shelves into side shelf brackets with one
pin and clip into the top opening on each side. See Figure 5.
Figure 7
16. Remove ignitor button, insert AA battery positive side facing
out, replace ignitor button. See Figure 8.
Figure 5
12. Fit screw head on cutting board to the opening on side shelf
and lay the cutting board down. See Figure 6.
-
+
Figure 8
Figure 6
Page 10
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
ROTISSERIE INSTALLATION for SBG2501-1 & SBG2801-1
4. Slide a rotisserie fork onto each end of the spit. See Figure
12.
The Infrared burner (Rotisserie burner) is for rotisserie cooking
only. Warning: Never use the main burners while using the
Infrared Back Burner, as this could result in igniting the drip-
pings, or overheating your grill. Remove warming rack and
cooking grids.
5. Adjust spacing between rotisserie forks to accommodate your
food. Tighten the thumbscrews to secure the holding forks.
6. Slide the bushing onto threaded end of spit. Insert spit into
slot of motor on left side of grill and place bushing into slot
on right side of grill. Tighten thumbscrew on bushing. See
Figure 12.
1. Remove all components from the carton. See Figure 9.
MOTOR
MOTOR BRACKET
ROD
ROD HANDLE
FORKS
ROD BUSHING
JAMB NUT
& SCREW
JAMB NUT
Figure 9
2. Attach the motor bracket to the left side of the grill with two
(2) lock washers, and 1/4” screws. See Figure 10.
Figure 12
7. Screw jamb nut to the threaded side of spit. Slide counterbal-
ance onto threaded end of spit. The counterbalance will remain
to the outside of the grill. Screw second jamb nut into the spit
to hold counterbalance in place. See Figure 13.
8. Attach handle onto spit. See Figure 13.
Figure 10
3. Slide motor into position on motor bracket. See Figure 11.
Figure 13
Figure 11
SBB00101-1-1007
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
ROTISSERIE INSTALLATION for SBG2501-1 & SBG2801-1
Rotisserie Use
Using the Ignitor
Warning: Do not operate the side burner option simultane-
ously with the rotisserie. The side burner will melt the rotisserie
handle.
Caution: If burner fails to light after 5 seconds, turn the burner
OFF for 5 minutes, to allow the gas to clear, then try again.
Attention: You must use the control knob that is second from the
left side of grill to ignite the rotisserie.
Secure meat firmly to the spit rod with meat holders (It may be
necessary to tie fowl and rolled roasts to retain their shape for even
rotation). To ensure proper rotation, it is important to adequately
balance and fasten the meat or fowl onto the spit rod.
1. Turn the control knob clockwise
tion.
to the OFF posi-
2. Turn ON gas supply to grill.
3. With the grill lid open, push and turn the rotisserie control
knob counterclockwise to ON.
4. Push and hold the ignitor button until the rotisserie burner
ignites.
Before heating the grill, rotate the spit rod and meat manually a
few times. If out of balance, attach the counterbalance assembly
to the spit to even out the weight and rotate again.
During cooking, adjust the meat holders if the meat shrinks and
pulls away from the spit rod. Use gloves and caution to prevent
burns.
Attention: When igniting the rotisserie burner, hold rotisserie
control knob in for 30 seconds in order to energize the thermo-
couple.
Be certain that the rotisserie brackets and motor are secured in place,
then light the burner and close the grill lid for preheating.
5. If rotisserie burner does not ignite, turn rotisserie control knob
After preheating, place the loaded spit rod into position. Start the
rotisserie motor and make certain the food is properly balanced.
Close the grill lid.
clockwise
to the OFF position. Turn OFF gas supply
to grill. Refer to Troubleshooting section in this manual.
Before rotisserie cooking you will need to remove the warming rack
and the Cooking Grids from your grill. When Rotisserie Cooking
you can place a Cooking pan under the food to be cooked. This will
capture the drippings and keep your grill clean of excess grease
which could cause a fire. Use caution when moving a cooking pan
containing hot oils.
Note: Beef and pork roasts and certain types of fowl will release
a considerable amount of fat and juice in the process of cooking
and are therefore “self-basting.” Lean meat and chicken will taste
better if basted occasionally with melted butter, margarine, salad
oil, barbeque sauce or a sauce of your own preference.
The exact degree of “doneness” can be determined by the use of
a meat thermometer.
The Rotisserie Motor is rated to turn a maximum load of 12
pounds.
ROTISSERIE COUNTERBALANCE
Warnings:
Never use the Rotisserie Motor in the rain, and never use it if it
has become wet.
Always use a grounded three-prong outlet and a three-prong exten-
sion cord to energize the Rotisserie Motor.
Never alter or remove the grounding prong on the Rotisserie Power
Cord, as an electric shock hazard would then result.
Never permit an electrical supply cord or gas supply line to
contact any heated surface of this grill.
WARNING
The Rotisserie Motor must be electrically grounded in accordance
with local codes or, in the absence of local codes, with the National
Electric Code, ANSI/NFPA 70. Keep the Rotisserie Motor electric
cord away from the heated surface of the grill. Do not operate the
Rotisserie with a damaged cord or plug, or if the Rotisserie malfunc-
tions or has been damaged in any manner. Call the Customer Service
for replacement. The power supply cord has a 3-prong grounded
plug. For your personal safety do not remove the grounding prong.
It must be plugged into a mating 3-prong grounding type receptacle,
grounded in accordance with the National Electrical Codes and lo-
cal codes and ordinances. If an extension cord is used, it must be
properly grounded and suitable for use with Outdoor Appliances.
Keep the extension cord connection dry, off of the ground and out
of the reach of children. When the Rotisserie Motor is not in use,
remove and store in a dry area.
Figure 14
SCREW JAMB NUTS ONTO ROD UNTIL SNUG AGAINST
COUNTERBALANCE. COUNTERBALANCE CAN BE
ADJUSTED VERTICALLY FOR BEST WEIGHT DISTRIBU-
TION.
Page 12
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
PROPANE GAS GRILLS
Grill Location
3. Provided with a listed safety device having direct access with
the vapor space of the cylinder and the cylinder supply system
must be arranged for vapor removal.
4. Provided with a shutoff valve terminating in a valve outlet as
specified in the Standard for Compressed Gas Cylinder Outlet
and Inlet Connections, ANSI CGA-V-1.
When choosing the ideal location for your Superb by Broilmaster®
Gas Grill, remember this grill is designed for outdoor use ONLY.
You should never install or operate your grill in any building,
garage, or other enclosed area.
5. Provided with a plug to effectively seal off the cylinder outlet
when the cylinder is being stored or transported.
6. Provided with a collar to protect the cylinder valve.
For your safety, this grill should not be installed or operated under
any combustible materials, such as carports, covered porches,
awnings, or overhangs.
Caution: Do not use a propane gas cylinder which has a ca-
pacity greater than twenty (20) pounds with this grill and side
burner.
Never install or operate your grill in or on any recreational vehicle
or boat.
CAUTION: The installation and operation of this grill at
clearances less than specified below may lead to the possibility
of fire, property damage, or personal injury.
Propane Cylinder Safety
Liquid Propane (LP has a long history of safe use when the safety
precautions provided in this manual are followed.
Aminimum clearance of 6 inches is required from the side shelves
of the grill to any combustible material.
Failure to follow these safety precautions could result in a fire
or explosion causing property damage or personal injury.
Aminimum clearance of 16 inches is required from the back of the
grill to any combustible material.
Propane gas cylinders should always be handled, stored, and trans-
ported with extreme caution in a secured upright position.
Some examples of combustible materials are a wall, a fence, patio
furniture, or the wall of your home.
Never attempt to use or repair a propane gas cylinder that has been
damaged. Never attempt to use or repair a cylinder with a faulty or
damaged valve outlet.Acylinder that has been dropped, dented, or
otherwise damaged must be replaced.
The area surrounding the grill should be clear to ensure proper
ventilation. Do not obstruct the flow of combustion and ventilation
air in any way. The ventilation openings on the propane cylinder
enclosure must also remain free and clear of debris.
Apropane gas cylinder should never be transported in the passenger
area of a vehicle.
Portable grills should be level and positioned away from direct
wind prior to each use.
Keep cylinders out of direct sunlight and never apply any other
source of direct heat to them.
WARNING: Do not install or operate this grill where gaso-
line or other flammable materials are used or stored. Failure
to comply with this warning could result in explosion or fire
causing property damage or personal injury.
When refilling your cylinder, always insist on a reputable, quali-
fied gas dealer. Your propane gas cylinder is filled by weight, and
should never exceed eighty (80%) percent of its weight limit. If
the cylinder is not completely empty, the gas dealer must make
necessary adjustments to ensure it is not overfilled. Never use an
overfilled Propane gas cylinder.
Gas Type
Never use Liquid Propane (LP) gas with a grill designed for Natural
gas, or Natural gas with a grill designed for Liquid Propane gas.
The type of gas required for your grill can be determined from the
product identification label located on the grill’s right side panel
of the cart. Questions regarding different types of gases should be
directed to your gas supplier.
Cylinder Storage
Your grill must be stored outdoors in a well ventilated area if the
cylinder is attached to it.
Disconnected cylinders must have a threaded valve plug tightly
installed and must not be stored in any building, garage, or other
enclosed area.
Cylinder Requirements
Your Superb by Broilmaster® Gas Grill requires a standard twenty
(20) pound propane gas cylinder.
Flammable materials (gasoline, grill covers, etc.) must not be stored
in the cylinder enclosure.
The maximum height allowable for a replacement cylinder is ap-
proximately twelve (12”) inches (30.5 centimeters).
Always store Propane cylinders in a secured upright position, out
of reach of children.
The propane gas cylinder must be:
Connection Requirements
1. Constructed and marked in accordance with the specifications
for LP gas cylinder of the U.S. Department of Transportation
(D.O.T.) or the National Standard of Canada, CAN/CSA-B339,
Cylinders, Spheres, and Tubes for Transportation of Dangerous
Goods; and Commission as applicable.
Caution: Never use Liquid Propane (LP) gas in a grill designed
for Natural gas, or Natural gas in a grill designed for Liquid
Propane gas. Questions regarding different types of gases
should be directed to your local gas supplier.
2. Provided with a listed overfilling protection device (OPD).
SBB00101-1-1007
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
PROPANE GAS GRILLS (cont.)
Installation must conform to local codes or, in the absence of local
codes, with the National Fuel Gas Code, ANSI Z223.1. In Canada,
installation shall be in accordance with CAN/CGA-B149.2 Propane
Installation Code, or CAN/CGA-B149.1 Natural Gas Installation
Code, and local codes where applicable. Consult your local gas
supplier or propane gas dealer for code regulations and recom-
mended procedures.
Warning: Superb by Broilmaster® Gas Grills require Liquid
Propane (LP) cylinders equipped with an Overfill Protection
Device (OPD). An overfilled or improperly filled Propane cyl-
inder can be dangerous.
Always use the pressure regulator and hose assembly supplied with
your Propane gas grill.
Figure 15
Attach the pressure regulator to the Propane gas cylinder’s valve
using the plastic handwheel. Tighten in a clockwise motion to
achieve a gas tight seal. See Figure 16.
Note: Not all valve and cylinder combinations are compatible.
Check warning tag on valve and cylinder as well as external fit-
ting threads.
All Broilmaster pressure regulators and hose assemblies require
Propane cylinders with a Type 1 connection device as illustrated.
See Figure 16.
Pressure Regulator and Hose Assembly
The pressure regulator has an outlet pressure of not more than
eleven (11”) inches water column. It must be connected to the
Propane gas cylinder’s female valve outlet before the grill can be
operated.
Caution: Operation of a propane gas grill without the pres-
sure regulator and hose assembly will cause gas leaks which
could lead to fire or explosion, resulting in property damage
or personal injury.
Clockwise
Figure 16
Caution: Do not use a wrench or any other tool to tighten. Use
of a wrench or other tool will damage the plastic handwheel.
The pressure regulator’s fitting must remain clean and free of
nicks and scratches. A dirty, nicked or scratched fitting can cause
a gas leak, resulting in an explosion or fire. Use only genuine
Broilmaster® replacement parts unless otherwise specified by the
manufacturer.
Fit hose to the hook inside of the right side panel. See Figure 17.
Connecting to Propane Gas / Cylinder Retention Means
Attention: Propane gas cylinders that are acceptable for use with
this grill must comply with “Cylinder Requirements” section and
“Connection Requirements” section (Pages 13-14.)
Lift up the tank ring. Position the cylinder in the opening at the
bottom of the cart then fit the tank ring out side of the tank. See
Figure 15.
Figure 17
To disconnect the Propane gas cylinder, turn OFF the cylinder’s
valve and the grill’s control valve. Remove the regulator by turning
the plastic handwheel counterclockwise.
Page 14
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
GAS CONVERSION TO NATURAL GAS
A conversion kit to natural gas is included with your grill.
grill. You must contact a qualified repair person.
14. Replace back panel (5 Phillips screws from step 8).
15. Replace all control knobs with allen wrench.
16. Apply the completed conversion label adjacent to the rating
plate label on the right side panel of the cart.
1. Remove cooking grids and flame tamer from grill.
2. Use allen wrench supplied in conversion kit to remove control
knobs.
3. Remove control panel (4 Phillips screws).
17. The natural gas inlet pressure at the grill is to be set at 7.0” of
inlet pressure.
18. Ignite burners on grill and observe flame pattern. If flame is
yellow in color or flame is lifting off burner, the air shutter on
burners will require adjustment.
19. Turn OFF (but do NOT remove) natural gas supply to grill.
20. Loosen (but do NOT remove) two (2) Phillips screws at end
of each burner. Lift upward and pivot burner out of grill.
21. Loosen Phillips screw at air shutter. Air shutter for natural gas
should have about 1/4” opening. Open air shutter for a yellow
flame or close air shutter for a lifting flame. Tighten Phillips
screw at air shutter.
22. Replace burners into grill. Tighten two (2) Phillips screws at
end of each burner.
23. Ignite burners on grill to verify burner flame characteristics.
Installation must conform to local codes or, in the absence of local
codes, with the National Fuel Gas Code, ANSI Z223.1. In Canada,
installation shall be in accordance with CAN/CGA-B149.1 Natural
Gas Installation Code, and local codes where applicable. Contact
your local gas company for code regulations, recommended pro-
cedures, and the installation of your grill’s gas supply line.
Figure 18
4. Use a 7mm socket or wrench to remove all LP gas orifices
marked 1.02 from gas valves.
5. Install natural gas orifices marked 1.51 into gas valves. Apply
pipe compound to threads on orifices prior to installation.
6. Attach left side of control panel to grill with two (2) Phillips
screws from Step 3. Carefully insert left burner orifice into left
burner. Continue to carefully insert the remaining orifices into
the burners. Attach right side of control panel to grill with two
(2) Phillips screws from Step 3.
7. The low input adjustment screws are located inside the main
burner valve stems. Use small screwdriver supplied in conver-
sion kit to turn each adjustment screw clockwise 1/4 turn (90
degrees).
Caution: The grill and its individual shutoff valve must be dis-
connected from the gas supply piping system during any system
pressure testing at test pressures in excess of 1/2 PSIG.
Caution: The grill must be isolated from the gas supply piping
system by closing its individual manual shutoff valve during
any pressure testing of the gas supply piping system at test
pressures equal to or less than 1/2 PSIG.
Attention (SBG2501 and SBG2801 Only): The valve stem
that is second from the left side of the grill is the rotisserie
valve stem and it will not be adjusted.
8. Remove rotisserie burner back cover (5 Phillips screws - four
on the back and one on inside top of the back of the grill).
9. Use a 14mm wrench or adjustable wrench to remove LP
gas rotisserie orifice marked 0.84 for SBG2501 and 1.02 for
SBG2801 from orifice fitting.
10. Install natural gas rotisserie orifice marked 1.18 for SBG2501
and 1.51 for SBG2801 into orifice fitting. Apply pipe com-
pound to threads on orifice prior to installation.
11. Remove the hose and regulator from the gas connection on
grill with an adjustable wrench.
12. Connect the grill to the natural gas supply.
13. Attention: Before lighting your grill check all gas connections
including the adjustment screws in valve stems for gas leaks
with a soapy water mixture.
Caution: Do not use the grill if a gas leak is detected until gas
leak is corrected. If a gas leak can not be stopped, do not use
SBB00101-1-1007
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Checking for Gas Leaks
to the OFF position. Turn OFF gas supply to grill.
Refer to Troubleshooting section in this manual.
Check for gas leaks every time you connect your Superb by
Broilmaster® propane gas grill to a Propane gas cylinder, when a
connected cylinder has not been used recently, or when either a
natural or propane grill is being used for the first time.
OPERATING INSTRUCTIONS
Using Matches
Caution: If a burner fails to light after 5 seconds, turn the
burner OFF for 5 minutes, to allow the gas to clear, then try
again.
Caution: Do not use a flame when checking for leaks. Checking
for leaks with a flame may lead to a fire or explosion, resulting
in property damage or personal injury.
Attention: You must use the control knob on the right side of the
grill to ignite the first burner. The second burner to be ignited will
be the second from right side of grill and so forth, always moving
from right to left.
To check for gas leaks:
1. Use dish washing liquid and a little water to make a soapy
solution.
2. Turn OFF the knobs on the control panel.
3. Turn ON the gas at the supply or cylinder. A hissing sound
indicates a leak. Turn OFF the gas and repair the leak.
4. Apply the soapy water solution to all gas connections.
5. Look for bubbles. Bubbles indicate a leak.
6. If there are bubbles turn OFF the gas and repair the leak.
7. Turn the gas back ON and repeat the above procedures until
all leaks are repaired.
Attention: The control knob that is second from left side of grill is
for the rotisserie. See Rotisserie Operation on page 12.
1. Turn the right control knob clockwise
position.
to the OFF
2. Turn ON gas supply to the grill.
3. Open the grill lid.
4. Amatch holder is attached on the inside of the right door. Place
a match into match holder. Insert burning match through the
lighter hole on right cart side. Place burning match adjacent
to right burner.
Air Shutter Adjustment
1. Remove cooking grids and flame tamers from grill.
2. Ignite burners on grill and observe flame pattern. If flame is
yellow in color or flame is lifting off burner the air shutter on
burner will require adjustment.
3. Turn gas OFF and allow the grill to cool.
4. Loosen two (2) Phillips screws at end of each burner. Lift
upward and pivot burner out of grill.
5. Loosen Phillips screw at air shutter. Open air shutter for a
yellow flame or close air shutter for a lifting flame. Tighten
Phillips screw at air shutter.
6. Replace burners into grill. Tighten two (2) Phillips screws at
end of each burner.
7. Ignite burners on grill to verify burner flame characteristics.
OPERATING INSTRUCTIONS
Using the Ignitor
Caution: If a burner fails to light after 5 seconds, turn the
burner OFF for 5 minutes, to allow the gas to clear, then try
again.
Figure 19
5. Push and turn the right control knob counterclockwise
to HI.
Attention: You should use the center burner(s) to ignite the first
burner, then move from center to both sides.
6. If right burner does not ignite, turn right control knob clockwise
to the OFF position. Turn OFF gas supply to grill.
Refer to Troubleshooting section in this manual.
Attention: The control knob that is second from left side of grill
is for the rotisserie. See Rotisserie Operation on page 12.
1. Turn the right control knob clockwise
position.
to the OFF
2. Turn ON gas supply to the grill.
3. With the grill lid open, push and turn the right control knob
counterclockwise to HI.
4. Push and hold in the ignitor button until the right burner ig-
nites.
5. If right burner does not ignite, turn right control knob clockwise
Page 16
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (cont.)
Before Cooking
Before cooking on a grill for the first time, it should be “burned off”
to remove any oil residue from the manufacturing process.
1. Raise the grill lid.
2. Light grill burners.
3. Burn on HI for ten minutes.
4. Close the lid and burn on HI for an additional ten minutes.
5. Turn OFF gas. The grill is now ready for use.
Preheating
Before cooking on a gas grill, allow the grill to preheat on HI for
5 minutes with the lid closed.
This uses very little fuel and provides better flavor.
Electrical Accessories
If an electrical accessory (e.g. rotisserie) is used on your grill, the
accessory must be electrically grounded in accordance with local
codes, or in the absence of local codes, with the National Electric
Code, ANSI/NFPA70. In Canada, the electrical accessory must be
electrically grounded in accordance with the applicable section of
the current Canadian Electrical Code, CSA C22.1.
Any electrical accessory should be equipped with a three-prong
(grounding) plug, and plugged into a properly grounded three-
prong receptacle or wall outlet. Do not cut or remove the grounding
prong from the plug.
If an extension cord is required, use only a three-prong cord and
plug into a properly grounded receptacle as described above.
Do not expose an electrical accessory to water. Avoid using any
electrical accessory in wet weather as it may present a shock
hazard.
Keep any electrical cord and fuel supply hose away from all heated
surfaces.
SBB00101-1-1007
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Cleaning the Grill
Grease Tray
Caution: To prevent injury, do not clean a hot grill.
Empty periodically.
Note: Do not use a commercial cleaner on the cooking grids. Do
not brush grids while they are hot. Do not scrape grids.
Exterior
Clean regularly with a solution of mild detergent and hot water.
Superb by Broilmaster® protective covers are recommended. Stain-
less steel components can be easily cleaned with a spray-on stainless
steel cleaner found in most hardware stores.
For baked on residue use a BRASS (NOT STEEL) brush on the
cooking grids and other components.
Burn Off
This process is much like that used in self-cleaning ovens and is
most efficient when completed after each use of the grill.
Venturi Tubes
The venturi tubes allow air and gas to mix prior to burning, thus
ensuring an efficient flame. Spiders or other small insects may
build webs or nests inside the tubes obstructing air flow. Fire, or
flashback, can occur, in and/or around obstructed venturi tubes and
can cause damage to components beneath the grill or an unsafe
condition. TO reduce risk, inspections and cleaning should be
performed at least twice monthly when spiders are active. If the
grill has been unused for an extended period of time inspect the
tubes before using the grill.
Caution: Do not open the grill during the burn off process.
Opening the grill during the burn off process may cause a sud-
den grease fire flare up that could burn your face and arms.
Wait until the grill has cooled before opening.
1. Turn control knobs to HI. Close lid and allow the grill to burn
for ten minutes, or until no smoke is present. Do not allow the
grill to burn for more than 30 minutes.
2. Turn control knobs and gas supply to OFF and allow the grill
to cool.
Clean Rotisserie burner and venturi tubes as follows:
1. Remove rotisserie burner back cover (5 Phillips screws - 4 on
the back and 1 on the inside top).
3. Wipe COOL grill with a damp cloth to remove soot.
2. Use a small flexible brush to remove any debris from the
venturi tubes (interior of burners).
3. Replace rotisserie burner back cover.
Grill Bottom
Periodically remove cooking grids and flame tamers to clean the
interior of the grill. Scrape off baked on residue with a putty knife
or brass brush and rinse with water. Clean the bottom air holes
with a small knife.
Burner Maintenance
Stainless steel burners often turn reddish brown after use. This does
not effect the performance of the grill. When cleaning the interior
of the grill, remove the burners and clean with a brass brush. Wash
with water and a mild detergent.
Electrode Position
Igniter electrode tips need to be placed about 1/8” from the burner
surface in order to work properly. Adjust accordingly if it is mis-
aligned. See Figure 20.
BURNER
1/8”
IGNITOR
Figure 20
Page 18
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Although the manufacturer has attempted to ensure that your grill will operate properly and satisfactorily, sometimes problems do
arise. The following troubleshooting guide lists several possible problems and their probable cause and solution.
Problem
Cause
Solution
Burner will not light.
Gas injector not inserted in venturi tube.
Realign/engage gas injector with the
venturi tube.
Clogged gas injector.
Remove gas injector from gas control as-
sembly and clean.
Obstruction in gas line.
For propane models, ensure gas valve on
cylinder is OFF. Remove flexible hose and
blow out any debris.
Spider webs in venturi tubes.
Clean venturi tubes. See Maintenance
Section..
Misalignment of electrode.
Out of gas.
Position electrode properly.
Refill LP gas cylinder. If natural model,
turn on gas at source.
Dead battery.
Replace with “AA” Alkaline battery.
Adjust air shutter.
Inadequate grill temperature.
Poor combustion.
Misalignment of venturi tube and gas
injector.
Realign/engage gas injector with the
venturi tube.
Inadequate gas pressure.
Contact gas supplier for assistance.
Incorrect orifice/valve setting.
Refer to gas conversion instructions in this
manual.
Flames blow out
Cold grill.
Preheat grill at least 5 minutes on HI with
the grill lid closed.
Misalignment of burner tube and gas
injector.
Realign/engage gas injector with the
burner tube.
Poor combustion.
Adjust air shutter.
Turn or shield grill.
Open air shutter.
Extreme wind.
Yellow flames.
Air shutter improperly set.
Spider webs in venturi tubes.
Clean venturi tubes. See Maintenance
Section.
Seasoning salts on burner.
Oil film on burner.
Clean by washing burner with mild deter-
gent.
Allow burner to operate on HI for 10 to 15
minutes.
SBB00101-1-1007
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY TERMS
•
•
Stainless steel grill lid, grill body and cart components.
Porcelain-coated steel grill body
10 Years Against Rust-Through
5 Years Against Rust-Through
•
•
•
•
•
Porcelain-coated cast iron cooking grids
Stainless steel burners
Painted carts, mountings, and side burner housing
Infrared rotisserie burners
Stainless steel warming rack
•
•
Stainless steel side burner assembly
Porcelain-coated steel flame tamer
2 Years Against Rust-Through
1 Year Against Rust-Through
•
•
Paint and powder coating
All other parts not listed above
What Is Covered And For How Long
From the date this Superb by Broilmaster Gas Grill is first purchased, we will make available at our factory
a free replacement for any defective part covered by this warranty on the following basis. Proof of purchase
required. Warranty applies to original owner and is not transferable.
What Is Not Covered
•
•
•
•
•
•
•
•
Removal and reinstallation cost.
Labor for replacement or repairs.
The costs of a service call to diagnose a problem.
Transportation and shipping cost.
Surface corrosion.
Discoloration of stainless steel – a normal result from exposure to heat and weather – is not covered under this warranty.
Damage caused by dropping, scraping, or abrasive cleaning voids the warranty for all cooking grids.
Chips in the paint and porcelain coatings are not covered under warranty. Regular maintenance and cleaning - including the
use of a grill cover – will help keep your grill looking great for years.
Grills and finishes damaged by abrasive cleaning, improper installation, improper storage, accident, misuse, abuse, alteration,
commercial use, and unusually harsh environmental conditions. Harsh conditions could include, but are not limited to:
continual seawater spray, direct contact with pool chemicals or lawn chemicals, direct contact with corrosive materials.
Inoperable due to improper or lack of cleaning.
•
•
This warranty does not imply or assume any responsibility for consequential damages that might result from
misuse, or improper installation of this cooking appliance.
This warranty covers only claims involving defective workmanship or materials.
A bill of sale, cancelled check, or payment record should be kept to verify purchase date and establish warranty
period. Note: Empire Comfort Systems is committed to continuous product improvement. Materials and
specifications are subject to change without notice.
Page 20
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE NOTES
SBB00101-1-1007
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE NOTES
Page 22
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE NOTES
SBB00101-1-1007
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
THE MOST DURABLE GRILL
KNOWN TO MAN
BROILMASTER®
A Division of Empire Comfort Systems, Inc.
918 Freeburg Ave.
Belleville, Illinois 62220
Phone: 1-800-851-3153
FAX: 1-800-443-8648
VISIT OUR WEB SITE AT WWW.broilmaster.com
Page 24
SBB00101-1-1007
Download from Www.Somanuals.com. All Manuals Search And Download.
|