Thank You for purchasing the
IND-5000BT
1-DIN DVD/CD RECEIVER WITH 3.5” LCD
USER MANUAL
V1.0
Bravo View Technology
20153 Paseo Del Prado
Walnut, CA 91789
United States of America
909-869-0699
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Contents
Safety Precautions.........................................1
Safety Information..........................................2
Features .........................................................3
Panel Controls................................................4
Remote Controls ............................................5
USB/SD/MMC/MP3 Playback........................6
Basic Operation..............................................7
Rotary Knob Menu ....................................8-11
Radio Mode..................................................12
Disc Mode ...............................................13-16
BT Mode..................................................17-19
Device Connections ................................20-22
Installation Guide.....................................22-24
Anti-Theft System.........................................24
Troubleshooting............................................25
Care and Maintainance................................26
Specifications...............................................27
Caution
This product is a CLASS 1 LASER PRODUCT.
Use of controls or adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure. Do not open covers and do not
repair yourself. Refer servicing to qualified
personnel.
Two Laser Products
Wave length: CD: 780nm DVD: 650nm
Laser power: No hazardous radiation is
emitted with safety protection.
To reduce the risk of fire electric shock, and
annoying interference, use only the included
components.
Caution of Disc Using
1. Never insert a 3-inch ( 8cm ) CD contained
in the adapter or an irregularly shaped
CD. The unit may not be able to eject it,
resulting in a malfunction.
2. Disc Cleaning. Use a dry, soft cloth to wipe
the disc from center to edge, only neutral
detergent can be used.
3. When playing a new disc. New disc may
have some rough spots around the inner
and outer edges. If such a disc is used,
remove these rough spots with a pencil or
ball-point pen, etc.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
this product in any commercial (i.e. revenue-
generating) realtime broadcasting (terrestrial,
satellite, cable and/or any other media),
broad-casting/streaming via internet, intranets
and/or other networks or in other electronic
content distribution systems, such as pay-
audio or audio-on-dem and applications.
An independent license for such use is
mp3licensing.com.
DVD-R/RW Compatibility
It is possible to playback DVD-R/RW discs
recorded with the video format and Video
Recording format.
Video CDs Featuring PBC
Compatibility
It is possible to playback Video CDs featuring
PBC (playback control).
Button Operation Explanations
Some frequent operations
1. Move cursor
WMA and MP3 Compatibility
It is possible to playback WMA and MP3 files.
About WMA
This unit can playback WMA data.
Windows Media and the Windows logo are
trade marks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This unit may not operate correctly depending
In Setting mode, rotating the VOL knob has
on the application used to encode WMA files.
the same function as the
/
button to select
setting items.
About MP3
2. Confirm
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
Press the
button on the panel
to open the panel.
Music Card Slot
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Controls
Power on/off: Press to turn on/off the unit.
AMS
1. Panel open
16. - AMS: Auto preset (press more than 2 seconds)/
Preset scan (press birefly, in Radio mode)
- Stop (in CD, MP3/WMA, and DVD video mode)
- Terminate call (in BT mode)
2. Return to previous menu
3. Button 1: Play/Pause
4. Button 2: Intro play
5. Button 3: Track repeat play
6. Button 6: - DVD audio channel
17. AUX IN (3.5mm audio/video input)
18. Remote sensor
19. - Previous track (in CD, MP3/WMA, and DVD
video mode)
- Fast backwards (press and hold more than 2
seconds, in CD, MP3/WMA and DVD video mode)
- Tuning backwards (press briefly o tune
automatically, press and hold more than 2
seconds to tune manually, in Radio mode)
20. - Next track (in CD, MP3/WMA, and DVD video
mode)
- VCD audio channel L/R/ST
7. Button 5: Video system PAL/NTSC/AUTO
8. Button 4: Track random play
9. Button 1~6: Radio preset: Press to listen to a
preset station, and hold for more than 2 seconds
to store station.
11. Power on/off
12. - Rotate the knob to adjust volume level
- Press to select Audio/Video setting, and rotate
the knob to adjust level.
- Press more than 2 seconds to enter Setting
menu.
13. Select playing mode:
• Radio
• Disc (when disc inserted)
• USB (when USB inserted)
• SD (when SD/MMC inserted)
• AV 1 (rear audio/video input. External
peripheral devices with RCA audio and
video outputs can be connected with the
unit.)
• AV 2 (front audio/video input)
• BT
- Long press to return to main source menu
in any mode, then use navigate button to
select the desired mode, and press the
VOL button to confirm.
- Fast forwards (press and hold more than 2
seconds, in CD, MP3/WMA and DVD video
mode)
- Tuning forwards (press briefly to tune
automatically, press and hold more than 2
seconds to tune manually, in Radio mode)
21. - Press to navigate up among option items (in
DVD, CD and MP3/WMA modes)
- Play the previous preset radio station (in Radio
mode)
22. - Press to navigate down among option items (in
DVD, CD and MP3/WMA modes)
- Play the next preset radio station (in Radio
mode)
23. - Confirm operation (in Setting mode)
- Stop auto seeking (in Radio mode)
14. - Band switch: FM1-FM2-FM3-AM1-AM2 (in
Radio mode)
- Play/Pause (in DVD, CD and MP3/WMA
modes)
- Dial/Receive call (press briefly, in BT mode)
15. 3.5 inch TFT display
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controls
- AMS: Search and store stations
automatically
Press to turn on/off the unit.
22. - DVD audio
- VCD audio L/R/ST
23. - Display time/clock (Video mode)
- Return to previous menu
24. - Angle (DVD only)
- Terminate call (in BT mode)
25. - Video system PAL/NTSC/AUTO
- Radio band (in Radio mode)
- Dial/Receive call (in BT mode)
Remote Control Operating Range
The remote control can operate within a
distance of 3~5m.
Replacing the lithium battery
When the range of operation of the card
remote control becomes short or no function,
replace the lithium battery with a new one.
Make sure the battery polarity replacement is
correct.
1. Pull out the battery holder while pressing
the stopper.
2. Insert the button-type lithium battery with
the (+) mark facing upward. Insert the battery
holder into the remote control.
1. Zoom (DVD/VCD only)
2. Title (DVD only)
3. Power on/off
4. Setup
5. Menu cursor
6. Enter
7. Program
(CR 2025)
8. Digit area
9. Select Audio/Video Setting, then rotate the
knob to adjust level.
10. Volume
1
2
11. Mute
12. - Radio tune
- Track skip/seek
13. Subtitle (DVD only)
14. Source switch
15. Repeat
16. Repeat A-B
17. Stop/Return
18. Play/Pause
19. Goto search
20. - DVD menu
- PBC (for VCD 2.0 or up)
21. - OSD: On screen display
Warning
•
Store the battery where children cannot
reach. If a child accidentally swallows the
battery, consult a doctor immediately.
Do not recharge, short, disassemble or heat
the battery or dispose it in a fire.
Do not leave the battery with other metallic
materials. Otherwise, the battery may start
to give off heat, crack or catch fire.
•
•
•
When throwing away or saving the battery,
wrap it in tape and insulate.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
USB/SD/MMC/MP3 Playback
USB/SD/MMC Notes
1. Load SD/MMC Card
USB functions (flash memory type) MP3
music play
Insert the SD/MMC card into the slot, with
the front side at right.
1. SD/MMC card support
2. USB flash memory 2 in 1 (SD/MMC)
support
The unit will play the music automatically
and the LCD will show CARD.
3. FAT 12/FAT 16, FAT 32 is possible
- FAT 12/16 (dir: 200 support, file: 500
support)
- FAT 32 (dir: 200 support, file: 500 support)
4. Tag (id3 tag ver 2.0)
- Title/artist/album: 30 byte support
5. Multi card reader not support
6. USB 1.1 support
USB 2.0 support
(it can not support USB 2.0 speed. Just, get
the same speed with USB 1.1)
2. Take out SD/MMC Card
Press SRC button and switch to non CARD
mode, slightly press SD/MMC card, take
out the card when it pops out.
Note:
Not all kinds of USB devices are compatible
with the unit.
3. Load USB Equipment
Open the rubber cap, insert the USB into
the connector and the unit will play the
music in the
USB storer automatically, and the LCD will
show USB.
4. Take out USB Equipment
Press SRC button and switch to non USB
mode, then take off the USB stick, close
the rubber cap.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Turn on/off the Power
1. Press to turn on the unit.
The unit goes back to the last status after
power on.
2. Press again to power off.
Mute
When power on, press to cut the sound.
Note:
•
•
Doing the operation above again or
adjusting volume will release muting.
Mute icon appears on the TFT during
muting.
Note:
•
When some devices are not ready, they
cannot be selected.
• You should stop switching when the playing
source you desired has been selected and
wait for some seconds, the unit will auto
enter the playing source mode you have
selected.
Adjust the Volume
Rotate the knob on the panel or press VOL +/-
on the remote control to increase or decrease
the volume.
The adjustable range of volume is 0 to 39.
When Reverse Driving
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the original work mode after the reverse
driving is done.
Playing Source Selection
Method 1
Short press the SRC button on the panel
or remote control to cycle through all the
available sources.
Method 2
In any mode, long press the SRC button on
the panel or remote control to enter main
source menu , then use navigate button to
select the desired mode, and press the OK
button to confirm.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotary Knob Menu
1. Rotate the knob to adjust volume level.
3. Press the knob more than 2 seconds to
enter Setting mode, then Use
,
/
2. Short press to access the Audio&VIDEO
Setting menu.
and OK key to select setting items.
General Setting
BEEP: ON/ OFF
The beep tone feature allows the selection of
an audible beep tone to be heard each time
the menu is accessed.
LOUDNESS: ON/OFF
When listening to music at low volumes, this
feature will selectively boost certain bass and
treble frequencies.
TIME MODE
12 HOUR MODE: the clock displays in the
type of 12 hours such as 11:18 AM.
24 HOUR MODE: the clock displays in the
type of 24 hours such as 20:18.
Each press the knob to change the AUDIO
mode: EQ/Bass/Middle/Treble/Balance/Fader,
and rotate the knob to adjust level.
Each press the knob to change the VIDEO
mode: Bright/Contrast/Saturation, and rotate
the knob to adjust level.
TIME ADJUST
Press
/
or
/
key to set hour and minute.
to select one
Each time you press
/
EQ: USER/FLAT/POP/ROCK/CLASSIC/
JAZZ
segment of the clock display:
Hour-Minute
The Equalizer function applies preset sound
effects to the unit’s audio output signal. Turn
the rotary encoder to select from the following
equalizer options: USER, FLAT, POPULAR,
ROCK, CLASSIC, JAZZ. With the equalizer
function activated, if bass or treble is adjusted,
the EQ Mode will revert to “USER”. When
the equalizer function is activated, the most
recently selected bass/treble levels cannot be
adjusted. When the equalizer function is not
active, the unit will return to the most recently
selected bass and treble levels.
As you select segments of the clock display
the segment selected will be highlighted. Then
you can press
/
to put a clock right.
PARKING: ON/OFF
When it is in Parking “On” mode, if you
play the video disc, the screen will show
“WARNING: Engage Parking Brake to View
Video”.
MIRROR: ON/OFF
This option allows for selection of a mirror
image view when a rear view backup camera
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotary Knob Menu
(sold separately) is connected to the CAMERA
IN input on the back of the radio. Turn the
rotary encoder to select “On” or “Off”.
The rating of the disc is from 1 to 8:
(1) with the most limits when playing.
(8) with the least limits when playing.
Original setting: 8
SUBWOOFER: ON/80HZ/120HZ/160HZ
After connecting a subwoofer to the back of
Note:
the unit, press
/
key to select a crossover
frequency: OFF, 80, 120 or 160Hz.
The rating can be selected only under the
password unlocked status, and the limits can
be worked only under the password locked
status.
SUB VOLUME: 0-33
Press
/
key to select the desired
subwoofer out volume level.
DEFAULT: RESTORE
If this item is selected, the unit will return to
original setting.
DVD Setting
BRIGHTNESS
Set the brightness of the video output with
from 00 to 16.
CONTRAST
Set the contrast of the video output with
from 00 to 16.
HUE
Set the hue of the video output with
from 00
to 16.
TV SYSTEM: NTSC/PAL/AUTO
Select the TV system in the setting menu.
SATURATION
Set the saturation of the video output with
from 00 to 16.
TV TYPE: 4:3PS/4:3LB/16:9
Select TV type to watch wide screen movies.
4:3 Pan Scan: For 4:3 TV, left and right edges
will be cut.
4:3 Letter Box: For 4:3 TV, black bars will
appear on top and bottom.
16:9: For 16:9 wide screen TV.
PASSWORD
1. Press number button " 0000 " on the remote
control, then press the ENTER button to
confirm.
2. Press the desired 4-digit password, and
then press ENTER button to confirm.
3. Record the password and keep it in a safe
place for future reference.
If you forget the password, please
enter 0000 to reset a new password.
The password : 0000
RATING: 1 KID SAFE/2 G/3 PG/4 PG13/5
PG-R/6 R/7 NC-17/8 ADULT
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotary Knob Menu
the DVD MENU/TITLE will be displayed in the
selected language.
LANGUAGE Setting
If the DVD disc does not contain the selected
language, the DVD MENU/TITLE will be
displayed in the default language.
Radio Setting
OSD LANGUAGE:
Select one language that you are familiar with
to display system menu.
AUDIO LANG:
Select one dialogue language that you are
familiar with when playing back DVD discs.
LOC_DX: LOC/DX
Choose radio distant or local.
DX: Stations with strong and weak
signals can be broadcast.
LOCAL: Only station with strong signal can be
broadcast.
Note:
If the DVD disc has the audio file in the
selected language, the dialogues you listened
to will be in the selected language.
STEREO_MONO: STEREO/MONO
Choose FM mono/stereo.
If the DVD disc does not contain the audio file
in the selected language, the dialogues you
listened to will be in the default language.
You can change the language by pressing
[AUDIO] key of the remote controller.
SUBTITLE LANG:
Select one language that you are familiar with
to display DVD subtitles.
If the DVD disc has the subtitle file in the
selected language, the subtitle will be
displayed in the selected language.
If the DVD disc does not contain the subtitle
file in the selected language, the subtitle will
be displayed in the default language.
MENU LANG:
Select one language that you are familiar with
to display DVD menu.
Note:
If the DVD disc has the selected language,
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotary Knob Menu
BT Setting
PAIR: ON/OFF
Set pairing ON/OFF. If select ON, to return to
BT main menu.
AUTO CONNECT: ON/OFF
After disconnecting with your mobile phone,
the built-in bluetooth will send connection
order automatically in 20s if you have set the
‘AUTO CONNECT’ to ‘ON’.
AUTO ANSWER: ON/OFF
The built-in bluetooth changes the work mode
to phone mode automatically and displays the
calling number when one call is coming in.
The built-in bluetooth will put through the
call automatically if you have set the ‘AUTO
ANSWER’ option to ‘ON’, whereas you should
put through the call manually.
PIN CODE
The default pin code is “1234”. If you want to
set a new pin code, please input the desired
4-digit password by pressing the number
button on the remote conrol, and then press
ENTER button to confirm.
RESET: ON
If the Bluetooth function is abnormal, or
you forget the pin code, when RESET ON
is selected, the Bluetootch system will be
cleared and return to default setting ,and the
pin code also changed to “1234”.
PAIR NAME
Display the BT device name: IND-5000BT.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Mode
Accessing Radio Mode
Press the SRC button on the front panel or
remote control to switch to the Radio source.
2
1
3
1. Source Indicator
2. Current Preset Channels
3. Time/Clock
4
4. AM/FM Band
5. Radio Station Frequency
6. EQ Indicator
5
6
Selecting a Band
Storing Stations
Press BAND once or more to select FM1-
FM2 - FM3 - AM1 - AM2.
Display shows wave band, frequency, and
preset station number if already stored.
- Auto storing
1. Select a band (if needed).
2. Press AMS briefly to scan the preset station
P1 - P6 for 5 seconds each.
3. Hold AMS more than 2 seconds, the
6 strongest available stations will be
automatically saved in the preset button
(numbers 1-6).
Selecting a Station
Press the
or
tuning button to tune to
another station.
- Manual Storing
1. Select a band (if needed), then select a
station.
Tuning
2. Press and hold a preset button (numbers
1-6) on the front panel or remote control.
3. The preset number and station is displayed
and highlighted.
- AUTO SEEK
Press the
or
buttons to seek the next/
previous station automatically.
- MANUAL SEEK
Press and hold the
or
buttons to enter
manual tuning mode. Press the buttons again
to move the radio frequency number up or
down one step.
Recalling a Station
1. Select a band (if needed).
2. Press a front panel or remote control
preset button (numbers 1-6) to select the
corresponding stored station.
Note:
During manual seeking, if the pause between
two operating steps is longer than 5 seconds,
press the
or
buttons, the unit will enter
auto seeking.
Preset Mode
Six numbered preset buttons store and recall
stations for each band. The stored stations
(P1-P6) for the current band can be viewed on
the screen.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Mode
Accessing Disc Mode
If a disc is already in the disc slot but is not
playing, press the SRC button on the front
panel or on the remote control to switch to the
DISC source. To play files from an SD or USB
that is already inserted, choose the CARD
or USB source. The disc playback screen is
indicated below:
1
2
3
1. Source Indicator
2. Current Track/Total Track
3. Name of the Song Display
4. Audio Folder
5. Picture Folder
6. Video Folder
4
5
6
Insert a Disc
2. ERROR will be displayed if error found in
disc operation.
3. For VCD/CD, VCD or CD icon will appear
on the display.
Press
to flip down the panel. Insert the disc
into the slot, and the unit will change to disc
mode automatically.
4. While MP3/WMA files playback, MP3/WMA
icon will appear on the display.
5. For DVD, DVD icon will appear on the
display and TITLE appears. Press ENTER
or to play.
Note:
•
Please confirm whether there is a disc in
the unit before you insert another one.
• The unit will exit current playing source and
enter DVD mode when one disc is inserted.
File Type Supported
Audio file: MP3(*.mp3), WMA(*.wma)
Video file:
MP4 (*.avi, XVID)
Eject the Disc
MPEG 2 (*.vob)
Press
to flip down the panel. Press
to
MPEG 1 (*.dat)
eject the disc.
Picture file: JPEG (*.jpg)
MP3 file:
ISO 9660 or ISO 9660 + Joliet format - Max.
Note:
30 characters.
•
•
After ejecting the disc, the unit reverts to
radio mode.
You can eject a disc with the unit powered
off. The unit remains off after the disc is
ejected.
Max. nested directory is 8 levels.
The max. album number is 99.
The max. length of each track is 99 minutes
59 seconds.
Supported sampling frequency for MP3 disc:
8KHz to 48KHz (44.1KHz preferably).
Supported bit-rates of MP3 disc are: 32 - 320
kbps (128 kbps preferably).
Disc Playback
1. When disc inserted, display shows LOAD.
For MP3 or disc with mixed files, reading
time may exceed 1 minute.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Mode
front panel or ENTER on the remote control
to start play.
5. During the file playing, press to stop and
return to the sub-root.
Disc and File NOT Supported
*.AAC, *.DLF, *.M3U, *.PLS, MP3 PRO files
and files with DRM.
Open session discs.
Note:
Audio/Picture/Video File Playback
1. If the selected folder does not contain
any playable track, the track list is not
displayed.
2. During the folder selecting, press ESC
to the upper folder (parent folder). If the
uppermost folder is listed, ESC cannot be
used.
When AUDIO/PICTURE/VIDEO file is played,
Category/Folder/File list will be displayed on
the screen, and file/folder name being played
will be displayed on top. Current selected item
will be highlighted.
The list lets you see the list of track titles or
folder names on a disc. If you select a folder
on the list, you can view its contents.
MP3/WMA Notes
MP3 and WMA (Windows Media Audio) music
files are digital audio files that are compressed
to allow more files to be stored. This unit
can play MP3/WMA and video directly
from files contained on a CD-R/RW, DVD-
ROM, DVD+RW, DVD-RW, DVD+R, DVD-R
and DVD-VIDEO, or an SD card or USB
Device. Many types of software are available
for converting audio files into MP3/WMA
formats. Nero or Roxio Easy CD Creator
are recommended. This unit can play MP3
(MPEG1, 2, 2.5 Audio Layer 3). However, the
MP3 recording media and accepted formats
are limited.
For Audio Files
1. Press ESC to return to playlist menu.
2. Use
/
to select
AUDIO folders.
3. Press OK,
on the front panel or EN-
TER on the remote control to display all
available audio file folders.
4. Use
/
to enter file list and use
/
to
select desired file, press OK,
front panel or ENTER on the remote control
to start play.
on the
5. During the file playing, press will enter
power on logo, then press
to return.
For Picture files
Entering ID3 Tag
This unit supports ID3 tag version 2.0.
For character codes, refer to the table to the
below.
1. Press ESC to return to playlist menu.
2. Use
/
to select
PICTURE folders.
3. Press OK,
on the front panel or ENTER
on the remote control to display all available
picture file folders.
4. Use
/
to enter file list and use
/
to
select desired file, press OK,
on the
front panel or ENTER on the remote control
to slide show the pictures, and press PROG
to select picture showing style.
5. During the file playing, press to stop and
return to the sub-root.
For Video files
1. Press ESC to return to playlist menu.
2. Use
/
to select
VIDEO folders.
3. Press OK,
on the front panel or ENTER
on the remote control to display all available
video file folders.
4. Use
/
to enter file list and use
/
to
Entering File and Folder Names
Names using the code list characters are the
select desired file, press OK,
on the
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Mode
only file names and folder names that can
be entered and displayed. Using any other
character will cause the file and folder
names to be displayed incorrectly. The unit
recognizes and plays only files with the MP3/
WMA extension.
and 7 since they do not contain since they do
not contain any tracks directly. Folder 5 is not
recognized at all since it is at the fourth level.
Electronic Shock Protection
• 10 seconds for CD-DA (CDA)
• >45 seconds for MP3 recorded at 44.1kHz,
128kbps
Note:
• >90 seconds for WMA recorded at 44.1kHz,
128kbps
A file name entered with characters not on the
code list may not play correctly.
MP3 Playing Order
Stop Playback Temporarily
When selected for play, files and folders
(Folder Search, File Search or Folder Select)
are accessed in the order in which they were
written to the media. As a result, the order in
which they are expected to be played may
not match the order in which they are actually
played. You may be able to set the order in
which MP3/WMA files are to be played by
assigning file names beginning with play
sequence numbers such as "01" to "99". For
example, a medium with the following folder/
file hierarchy is subject to Folder Search, File
Search or Folder Select as shown below.
-
During playback, press
playback.
The sound will be muted.
Display "PAUSE" in the TV screen.
Press again to continue playback.
to pause
-
-
To resume normal play, repeat the operation.
Stop Playback Entirely
During DVD, VCD, CD, MP3 playback:
1. Press key once stopping the playback
and the relevant location on the disc is
saved, press
to resume the playback
from the saved disc location.
0
2. Press twice to cease the playback. Press
to start the playback from the very
beginning the Title page of the DVD or the
first track of VCD / CD.
(� )
1
�
2
�
ᅅ
ᅅ
ķ
ĸ
Select Desired Track
-
-
Press or to skip to the next track.
Use 1-9 and 0, 10+ buttons on the remote
control to select desired track number.
3
�
ᅅ
ᅅ
ᅅ
4
Ĺ
ĺ
Ļ
�
Fast Forward/Backward During
Playback
ᅅļ
5
�
Press
or
for more than 2 seconds once
ᅅ
ᅅ
Ľ
or more to select X2, X4, X8, X20, to fast
backward or forward track during playback.
- During the fast forward or backward
ľ
ƻ
�
ᅅ
Root Folder
Folder
6
�
operation, press
again.
briefly to playback
7
�
File
ᅅ
Ŀ
- During the fast forward or backward
operation, the volume will be muted.
Layer1 Layer 2 Layer 3 Layer 4 Layer5
The player will only recognize three folder
levels and does not display folders containing
only other folders. In the example above, the
unit will display folders 3, 4, 6, and 8, but not 2
Repeat
During playback, press REPEAT once or
more.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Mode
- RPT icon will appear on the display.
chapter number.
-
-
-
For VCD/CD: Display appears RPT ONE
RPT ALL RPT OFF
For DVD: Display appears RPT CHAPTER
RPT TITLE RPT OFF
For File disc: Display appears RPT ONE
For VCD and CD, select track number.
-
-
Press
to play, or move the cursor to
select "PLAY" and press ENTER to play.
If you want to delete the list, move the
cursor to "CLEAR", press ENTER to delete
all the list set before.
RPT DIR
RPT ALL
RPT OFF
-
Press PROG again to exit program play.
Note:
DVD Audio Select
Press AUDIO or R/L to select audio language
to listen if the DVD has multiple audio
languages.
If you do not select RPT on, when the entire
disc or TITLE playback has finished, the
system will stop. If no other control, after 5
minutes the unit will turn into standby mode.
VCD Audio Select
Press R/L to select audio channel to listen.
Repeat A
B
Select desired passage to repeat playback.
Press A
B once to select starting point.
Display shows REPEAT A.
- Press A
B again to select ending point.
L
R
Stereo
-
Display shows REPEAT A
passage start to replay.
B, and selected
DVD Subtitle Select
Press SUB.T to select the subtitle language
to show if the DVD has multiple language
subtitles.
-
Press A
B once again to exit. Display
shows A
B CANCEL.
PBC - Playback Control (for VCD
only)
DVD Title Select
1. If you insert a VCD with PBC, playback
starts from the beginning of the 1st track
automatically.
Press TITLE to display title or chapter list, use
cursor or digit number to select, press ENTER
to play.
2. Press PBC to show menu, use
/
or
digit button to select desired track. Press
to stop. Press PBC again to exit menu.
DVD Angle Select
Press ANGLE to select different angle to view
if the DVD has multiple-angle views.
GOTO
Goto desired track/chapter or time point
directly.
Picture Mirror
When you view a picture, press repeatly
to mirror the picture vertically, and press
repeatly to mirror the picture horizontally.
Press GOTO button on the remote control,
track or DVD Title/Chapter and time display
on top of the screen. Current item is
highlighted. Use
/
to select desired item.
Use digit button to select number. Press
ENTER to confirm.
ZOOM
Press ZOOM button, the picture will be
zoomed accordingly.
Program
-
Press PROG to enter program list. Use
or cursor and digit button to enter
number.
For DVD and File disc, select title and
/
/
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Mode
Accessing Bluetooth Mode
Stop Pairing
Press the SRC button on the front panel or
remote control to switch to the Bluetooth
source.
You can stop pairing or disconnecting in this
following way:
Enter BT Setting menu, switch the PAIR: ON/
OFF options to OFF, then press ESC to return
to Bluetooth main menu. After disconnecting,
“NO DEVICE” will appear on the screen and
the Bluetooth icon will disappear.
Note:
For your safety, avoid talking on the phone as
much as possible while driving.
(if the mobile
Incoming Phone Waiting
Bluetooth is a wireless transmission way
for short distance. The built-in Bluetooth
can connect with the mobile phones having
Bluetooth function.
phone has this function depending on the type
of mobile phone)
In the mode of communication or BT AUDIO
(MUSIC PLAYING), if there is a call coming
in, the TFT screen will appear "PHONE
After connecting, you can control your mobile
phone through the unit.
NUMBER ANSWER?". If you press
key
to stop communication you are making, and
receiving the incoming phone. If you press
key on to reject the incoming call, and resume
the former communication.
Pairing
Use this function to establish a connection
between the unit and your mobile phone.
Press the knob more than 2 seconds to enter
Setting mode, then Use
setting item, and use
the PAIR: ON/OFF options to ON.
key to select BT
key to switch
Voice Transfer
During talking, press
/
,
key to transfer audio
from the unit to your mobile phone, and press
key again to transfer audio from your
mobile phone to the unit.
Press ESC to return to Bluetooth main menu.
“WAITING FOR PAIRING” will appear on the
screen.
Note:
Some mobile phones will transfer audio from
the unit to themselves once the incoming call
is answered.
(if the mobile phone has the
BT Audio
A2DP & AVRCP functions)
After pairing successfully, in the mode of
Bluetooth main menu, open the audio player
of your mobile phone and set the transmit
mode to Bluetooth. At this time, the unit
screen will appear “MUSIC PLAYING”, and
the audio will be transferred from the mobile
phone to the unit. Some mobile phones may
instruct to connect with the unit. After found
the Bluetooth device name on mobile phone,
you should select to connect it, and then input
the pairing code (“1234” by default). When
Turn on Bluetooth function of your mobile
phone, keep phone within 3 meters to the unit
and start to search for Bluetooth devices.
After the name of the Bluetooth module
appears on the pairing list on your mobile
phone, you should select it. At this time, a
pairing code is required. Enter the pairing
code (“1234” by default) and the Bluetooth
pairing will process automatically. Some
mobile phones may instruct you to select
connecting or disconnecting, please select
connecting.
music playback, you can press
remote control to switch to play/pause, and
press the key on the front panel and
on the
/
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Mode
In the mode of the music player working, if
you want to make a phone call, you can press
the number keys on the mobile phone or on
remote control (if the options are available).
LOG
the remote control, then press
to dial. At
the same time the music player will stop. The
TFT screen will appear “DIALLING”, after the
call received, the voice will be transferred
to the unit. When the call ends, the TFT
screen will appear “MUSIC PLAYING”. Some
mobile phone may instruct whether resume to
playback.
After pairing successfully, in the mode of Blue-
tooth main menu, press
ling history.
key to select dial-
If there is an incoming phone call, the music
player will stop, and the TFT screen will
appear “PHONE NUMBER ANSWER?”. When
the call ends, the TFT screen will appear
“MUSIC PLAYER”. Some mobile phone may
instruct whether resume to playback.
1.
Making a phone call using missed call history.
Press button to search for desired record
on the list.
Missed Call
/
2.
Dialed Call
Making a phone call using the dialled number
history.
Press
/
button to search for desired record
on the list.
3.
Received Call
Making a phone call using the received call
history.
Press
/
button to search for desired record
on the list.
Music Mode
A2DP
A2DP is short for Advanced Audio Distribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones not supporting this function can
transmit mono audio only.
AVRCP
AVRCP is short for Audio/Video Remote
Control Profile. The mobile phones supporting
this function can control the playback of a
Bluetooth audio player.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Mode
General Notes for Bluetooth
1. For N7X, N9X, PHILIPS, Sony Ericssion,
SAMSUNG mobile phones, during our test,
after the mobile phones appear connection
successful, the unit still appear waiting for
pairing. At this time you must find the unit’s
Bluetooth module name on the pairing list
of your mobile phone and select it. In the
submenu, select connecting, then the unit
will appear pair OK. Otherwise, there is no
voice coming out when communicating,
though the mobile phone has already
displayed pair OK. Some mobile phones,
such as PHILIPS, when it playbacks
A2DP, you must in its playbacking mode,
find the unit’s Bluetooth module name
and reconnect (check your mobile phone
whether has the A2DP & AVRCP functions).
2. When pairing, some types of mobile
phone can instruct you how to operate,
for example, when you make a phone call
with the unit, but no voice comes out, it is
because the mobile phone voice doesn’t
be transferred to the unit. The SAMSUNG
mobile phone can instruct voice should be
transferred to Bluetooth device.
3. Depending on the mobile phone, if private
mode is selected, when you make a
phone call with the unit, when received,
the voice can be transferred to the mobile
phone. But sometime the Bluetooth maybe
disconnect till the communication ends, and
connects your mobile phone and the unit
automatically. Some mobile phones maybe
require you to perform again the pairing
operation.
4. For mobile phone, the Bluetooth device
name must be primary symbols or
numbers. Otherwise, some unpredictable
issues may occur during the Bluetooth
devices connecting and making phone call.
5. After paired OK, if no sound produced,
please check the Bluetooth stereo audio
whether is switched to ON.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Connections
If a proper fuse is installed and electrical
problems still occur, please contact with
any professional car shops for inquiry.
DO NOT connect other equipments with the
car battery to avoid battery overheating.
Please make sure all the wiring connections
& the cables of the Speakers are well-
insulated. Otherwise, this unit may be
damaged by short circuit.
If there is no ACC available, please connect
ACC lead to the power supply with a switch.
If an external power amplifier is connected,
please don't connect P.CONT lead to the
power lead of the external power amplifier,
otherwise, electric spark or other damage
may be resulted.
Notes of connection
•
To avoid short circuit in the electrical
system, ensure that the negative battery
cable is disconnected before installation.
To prevent short circuit in the wiring and
damaging to this unit, secure all wirings
with cable clamp or adhesive tape. Route
the wirings in a secured, out of heating
place without touching any moving parts
such as gear shift, handbrake, and seat
rails to prevent the wiring insulation being
melted / wore off.
•
•
•
•
•
•
•
Never pass the yellow power cord through
the installation hole into the engine
compartment and connect to the car
battery. Otherwise, a high possibility of
serious short circuit to the electrical system
may be occurred.
Replacing a new fuse with 15A rating
when the old one is broken, using no
fuse or fuse with improper rating may
cause damage to this unit or even fires.
•
•
Never ground the speaker output to prevent
the damage to the built-in power amplifier.
The minimum rating of the speakers
connected to this unit is 50W with 4 to 8Ω
impedance.
Parking Brake Cable Connections
Reverse Driving Cable Connections
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Connections
Wiring Diagram
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Guide
Device Connections
Preparation
Using the ISO Connector
1. If your car is equipped with the ISO
connector, then connect the ISO connectors
as illustrated.
1. Disconnect battery
Before you begin, always disconnect the
battery negative terminal.
2. For connections without the ISO
connectors, check the wiring in the vehicle
carefully before connecting, incorrect
connection may cause serious damage to
this unit.
Cut the connector, connect the colored
leads of the power cord to the car battery,
as shown in the colour code table below for
speaker and power cable connections.
Note:
If the unit is to be installed in a car equipped
with an on-board drive or navigation computer,
do not disconnect the battery cable. If the
cable is disconnected, the computer memory
may be lost. Under these conditions, use extra
caution during installation to avoid causing a
short circuit.
2. Remove transport screws
Function
Location
IMPORTANT:
Remove these two transport screws
before installation. Otherwise, the
DVD player will not work.
Connector A
Connector B
Rear Right (+) - Purple
1
2
3
4
Rear Right (-) - Purple /
Black Stripe
Telephone Mute/Pink
Battery 12V(+)/Yellow
Front Right (+) - Gray
Front Right (-) - Gray /
Black Stripe
3. Remove unit from sleeve
Lift latches on both sides of sleeve to remove
half-sleeve from the unit.
ANT/Amp control
/Blue
Front Left(+) - White
5
6
Front Left(-) - White /
Black Stripe
Mounting Sleeve Installation
1. Slide the mounting sleeve off the chassis.
If it is locked into position, use the removal
tools (supplied) to disengage it.
Rear Left (+) - Green
7
8
ACC+/Red
Rear Left (-) - Green/
Black Stripe
Ground/Black
2. Check the dashboard opening size by
sliding the mounting sleeve into it.
If the opening is too small, carefully cut or
file as necessary until the sleeve easily
slides into the opening. Do not force the
sleeve into the opening or cause it to bend
or bow. Check for sufficient space behind
the dashboard for the unit chassis.
This unit can be installed in any dashboard
with a suitable 183 mm (W) x 52 mm (H)
opening as shown above. The dashboard
should be 4.75 mm - 5.56 mm thick in order
to be able to support the unit.
3. Locate the series of bend tabs along the
top, bottom, and sides of the mounting
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Guide
sleeve. With the sleeve fully inserted into
the dashboard opening, bend as many of
the tabs outward as necessary to firmly
secure the sleeve to the dashboard.
Kit Installation
If your vehicle requires the use of an
installation kit to mount this unit, follow the
instructions included with the installation kit to
attach the unit to the mounting plate supplied
with the kit.
1. Wire and test the unit as outlined in the
Mounting Sleeve Installation instructions.
2. Install the radio/mounting plate assembly
to the sub-dashboard according to the
instructions in the installation kit.
CAUTION:
For proper operation of the DVD player,
the chassis must be mounted within
20 of horizontal. Make sure the unit is
mounted within this limitation.
4. Place the unit in front of the dashboard
opening so the wiring can be brought
through the mounting sleeve. Follow the
wiring diagram carefully and make certain
all connections are secure and insulated
with wire nuts or electrical tape. After
completing the wiring connections, turn the
unit on to confirm operation (vehicle ignition
must be on). If the unit does not operate,
re-check all wiring until the problem is
corrected.
3. Replace the dashboard trim panel.
ISO Installation
This unit has threaded holes in the chassis
side panels which may be used with the
original factory mounting brackets of some
vehicles to mount the radio to the dashboard.
Please consult with your local car stereo shop
for assistance on this type of installation.
1. Remove the existing factory radio from the
dashboard or center console mounting.
Save all hardware and brackets as they will
be used to mount the new radio.
5. Make sure the radio is right-side up, then
carefully slide the radio into the mounting
sleeve until it is fully seated and the spring
clips lock it into place.
2. Carefully unsnap the plastic frame from the
front of the new unit chassis. Remove and
discard the frame.
6. Secure the rear of the unit to the car
body using the mounting bolt and rubber
cushion.
3. Remove the factory mounting brackets and
hardware from the existing unit and attach
them to the new unit. Do not exceed M5 x
9mm maximum screw size. Longer screws
may damage components inside the
chassis.
7. Test the unit using the “Operation”
instructions that follow.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Guide
Anti-Theft System
4. Wire the new unit as outlined in the
Mounting Sleeve Installation instructions.
5. Mount the new unit assembly to the
dashboard or center console using the
reverse procedure of step 1.
This unit is designed with a flip-down
detachable panel.
The panel can be detached and taken with
you, helping to deter theft.
Remove the Panel
1. Press to switch off the power of the unit.
Reset
2. Press
to flip down the panel.
3. Grasp the right side to release the front
panel and then pull it at an angle to remove
the right side from the chassis.
4. Store the front panel in the supplied carrying
case to protect it from dirt and damage, and
take it with you to prevent theft.
The RESET button is located behind the front
panel and can only be accessed with the front
panel opened. Resetting the unit will erase
the time and preset memories. It should only
be activated upon initial installation after all
wiring is complete, or if there is a malfunction
of any of the switches on the unit. In these
circumstances, pressing the RESET button
will clear the system and return the unit to
default operation.
Re-attach the Front Panel
1. With the panel laying flat (in the “open”
position), insert the left side of the panel in
place until correctly engaged.
2. Gently press the right side of the panel until
the mechanism locks it into place.
Fuse
When replacing a fuse, make sure the new
fuse is the correct type and amperage. Using
an incorrect fuse could damage the radio.
3. Lift upward to close the panel.
Reconnect Battery
When wiring is complete, reconnect the
battery negative terminal.
Remove the Unit
1. Remove the panel and the trim plate.
2. Remove the trim ring by firmly grasping one
side and pulling.
3. Insert the removal keys straight back until
they lock, then pull the radio out. If the
removal keys are inserted at an angle, they
will not lock properly and will not release
the unit.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you suspect something is wrong, immediately switch power off. Immediately stop using it and
call the store where you purchased it. Never try to repair the unit yourself because it is dangerous
to do so.
Problem
General
Possible cause
Solution
Car ignition is not on.
The unit will not switch Cable is not properly
Turn your car key in the ignition.
Check cable connection.
on.
connected.
Fuse is burnt.
Replace fuse with a new fuse of the
same capacity.
Volume is set at minimum or Check the volume or switch the mute
the mute function is on. function off.
No sound
The unit or screen does
not function normally.
The unit system is unstable. Press the RESET button.
DVD mode
T h e d i s c i s i n s e r t e d Disc must be inserted with the label
The appliance will not
play discs.
incorrectly.
side facing up. Clean the disc and
The disc is dirty or damaged. check for damage. Try another disc.
Adjust mounting angle to less than 30˚.
Mount the unit securely with the
supplied parts.
Sound skips due to Mounting angle is over 30˚.
vibration.
Mounting is unstable.
TUNER mode
U n a b l e t o r e c e i v e The antenna is not connected
Connect the antenna properly.
stations.
properly.
Poor quality reception of The antenna is not fully Fully extend the antenna and if
radio station.
extended or it is broken.
broken, replace it with a new one.
Connect the permanent live on the
unit to the permanent live on the
vehicle.
The battery cable is not
properly connected.
Preset stations are lost.
USB/SD/MMC mode
The memory card or USB
device has been inserted the Insert it the other way around.
wrong way round.
Unable to insert USB
device or SD/MMC card.
Check that the USB/SD/MMC file
system is in FAT or FAT32 format.
The USB device or SD/
MMC card cannot be NTFS format is not supported. Due to different formats, some models
read.
of USB storage devices or MP3
players may not be read.
Remote control
The remote control is
not working or does not
work properly
The batteries are low or
empty.
Change the batteries.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
DVD Player
The following guidelines will help you extend the life of your DVD player:
1. When cleaning the vehicle interior, do not get water or cleaning fluids on the unit.
2. The DVD player will not operate properly in extreme hot/cold or under damp conditions. In
case of such conditions, wait until the vehicle interior reaches a normal temperature or any
condensation on the disc player lens has evaporated before using the player.
3. Always remove the disc when the player is not in use.
4. The unit is designed with a vibration dampening disc mechanism to minimize interruption of
disc play due to normal vibration in a moving vehicle. However, occasional sound skips may
occur when driving on very rough roads. This will not scratch or damage the disc, and normal
play will resume when the rough conditions cease.
CD-R and CD-RW Capability
Depending on media type and method of "recording/burning", some CD-R/RWs may be
incompatible with this unit. After "recording/burning", the session must be closed. Please refer
to your software's recommended procedures for closing a disc/session. Review your recording
software to familiarize yourself with the correct "recording/burning" procedures. We recommend
using the latest versions of ROXIOTM or NEROTM burning software.
In addition, this unit will only recognize the CDDA (Compact Disc Digital Audio), .MP3 and .WMA
formats "recorded / burned" onto a CD-R/RW. This unit does not support .WAV, .OGG or other
formats.
Disc Care and Handling
Dirt, dust, scratches and warpage can cause skips in the playback and deterioration of sound
quality. Please follow these guidelines to take care of your compact discs.
1. Do not touch the disc surface.
2. Never use chemicals such as record sprays or household cleaners to clean discs, as they can
irreparably damage the disc’s surface.
3. Discs should be kept in their storage cases when not in use.
4. Do not expose discs to direct sunlight, high temperatures or high humidity for long periods.
5. Carefully wipe fingerprints, dust and dirt from the disc’s playing surface with a soft cloth.
Wipe in a straight motion from the inside to the outside of the disc.
6. Do not stick paper, tape or disc labels on disc surfaces, as internal damage may occur.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power supply:
12VDC (11V-16V), Test voltage 14.4V, negative ground
Maximum power output:
Continuous power output:
Suitable speaker impedance:
Pre-Amp output voltage:
Fuse:
45W x 4 channels
20W x 4 channels (4 10% T.H.D.)
4-8ohm
4.0V (CD play mode: 1KHz, 0dB, 10K load)
15A
Dimensions (WxHxD):
Weight:
178 x 50 x 166mm
1.7kg
Aux-in level:
500mV
Sub-out:
4.0V (CD play mode: 61Hz, 0dB, 10K load)
3.5 Inch TFT LCD
Display resolution (dot)
Active area (mm)
Screen size (inch)
Dot pitch (mm)
Contrast ratio
320×(RGB)×234
76.32 (H)×42.822 (V)
3.5 (16:9l)
0.2385 (H) x 0.183 (V)
350
Brightness
350nits
FM Stereo Radio
Frequency range:
87.5-108.0MHz (Europe)
87.5-107.9MHz (America)
8dB μ
30Hz-15KHz
30dB(1KHz)
50dB
Usable sensitivity:
Frequency response:
Stereo separation:
Image response ratio:
IF response ratio:
Signal/noise ratio:
70dB
>55dB
AM(MW) Radio
Frequency range
522-1620KHz (Europe)
530-1710KHz (America)
30dBμ
Usable sensitivity (S/N=20dB)
Disc Player
System:
Disc digital audio system
20Hz - 20KHz
>80dB
Less than 0.20% (1KHz)
>60dB
PAL/NTSC/AUTO
Frequency response:
Signal/noise ratio:
Total harmonic distortion:
Channel separation:
Video signal format system:
Video output:
1
0.2V
Components
Mounting sleeve
1
4
1
1
1
1
2
1
1
1
Machine screws M5x6 mm
Mounting bolt (50 mm)
Wire connector
Removable face plate case
Trim plate
Removal key
Operating Instructions
Rubber cushion
Note:
Specifications and the design are subject to
change without notice due to improvements.
Remote control
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Bravo View Technology warrants this product (including any accessory and/or cable) against
defects in material or workmanship as follows:
1. Labor. For a period of 1 Year from original date of purchase, if the product is determined to
be defective, Bravo View will repair or replace the product at no charge.
2. Parts. For a period of 1 Year from original date of purchase, Bravo View will at no charge,
replace with new or rebuilt parts in exchange for defective parts. The warranty will either continue
from date of original purchase or 90 days from repair (Whichever is longer).
This warranty does not cover customer misuse, improper installation, poor signal (including any
“noise”), cosmetic damage, damage due by accident, abuse, negligence, commercial use, and
improper operation.
Proof of Purchase in the form of a copy of a bill of sale or copy of receipted/invoice, which shows
clearly the sale of the unit, is required.
Repair or Replacement as provided under this warranty is the exclusive remedy of the
consumer. Bravo View Technology shall not be liable for any incidental or consequential
damage for breach of any express or implied warranty on this product. In no event shall
Bravo View Technology be liable for any incidental or consequential damage whatsoever
arising out of the use or inability to use the product. Under no circumstance shall Bravo
View Technology’s liability exceed the purchase price paid for the product. Except to the
extent prohibited by applicable law, any implied warranty or merchantability or fitness for a
particular purpose on this product is limited in duration to the duration of this warranty.
PROCESS:
1. Contact Bravo View and describe the problem with the unit. Please have your model number,
date of purchase and where it was purchased ready. If requesting on-line, please include your
name, address and telephone number.
2. If determined that the item is warrantable, Bravo View will issue a RA# and provide an
address to mail the unit back to.
3. Bravo View is not responsible for articles lost or stolen during shipping. IT IS ADVISABLE TO
SHIP THE UNIT IN A METHOD IN WHICH YOU CAN TRACK THE PACKAGE, AND POSSIBLY
INSURE THE PACKAGE. Bravo View does not cover the expense of mailing the unit back to us.
4. Once Bravo View receives and validates the unit to ensure it is within warranty, Bravo View
will replace the unit, fix the unit, or offer a substitute of the unit if a replacement is not available.
Bravo View may send a refurbished unit back.
5. Bravo View will mail the unit back to you. To obtain warranty service, you must contact Bravo
View Technologies for a Return Authorization Number (RA#). 866-40-BRAVO or visit www.
bravoview.com.
Download from Www.Somanuals.com. All Manuals Search And Download.
CLASS 1
LASER PRODUCT
P.N.: 12707500XXXX
Download from Www.Somanuals.com. All Manuals Search And Download.
|