Bravetti Food Processor EP114H User Manual

QUAD BLADE  
FOOD PROCESSOR  
OWNER’S MANUAL  
Model EP114H  
120V., 60Hz., 800 Watts  
EURO-PRO Operating LLC  
94 Main Mill Street, Door 16  
Plattsburgh, NY 12901  
Tel.: 800-798-7398  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEANING & MAINTENANCE  
Congratulations! As the owner of a new Bravetti Food Processor, you are about to  
use a very versatile and powerful kitchen appliance that will quickly become an  
indispensable item in your kitchen. Bravetti products are engineered to meet the  
highest quality standards and are designed to offer the ultimate in ease of operation  
and convenience.  
Re-settable Thermal Safety  
Using the Storage Compartment  
Device  
Your Bravetti QUAD BLADE Food  
Processor comes with a storage  
compartment. (Fig. 20)  
Your Food Processor has been  
designed with a unique safety system  
which prevents damage to the unit’s  
motor and drive system, should you  
inadvertently overload your appliance.  
The safety system will automatically cut  
the electric power to the appliance  
when the device senses an overload or  
excessive temperature in the motor or  
drive system. Should this occur during  
use and the appliance stops  
IMPORTANT INFORMATION  
Please read all the following instructions carefully.  
IMPORTANT  
For your protection, the Bravetti Food Processor has a been fitted with a safety  
interlock switch. The unit cannot run unless the food processor lid is locked in place.  
Never attempt to defeat the food processor lid interlock.  
functioning, follow the re-setting  
procedure below:  
Fig.20  
1. Lift the lid of the storage compartment.  
2. Place attachments inside as shown  
above.  
1. Turn the “ON/OFF” speed control  
to the “OFF” position  
2. Unplug the unit from the wall  
receptacle.  
3. Remove and empty the processor  
bowl. Ensure that no food is  
jamming the cutting blades or  
attachments.  
Spatula Storage  
Slide the spatula into the slot provided  
on the side of the processor body.  
(Fig. 21)  
4. Allow the appliance to cool down  
for a minimum of 30 minutes.  
5. Re-install the processor bowl and  
re-plug appliance in the wall outlet.  
6. Proceed to use the appliance as  
before. Should the appliance still  
fail to operate, turn the “ON/OFF”  
speed control to the “OFF” position  
and unplug from the wall outlet.  
Allow the appliance to cool down  
for an additional 1 to 2 hours. After  
this time has passed, repeat the  
restart procedure, steps 5 and 6  
above.  
Fig. 21  
Cord Storage  
The power supply cord can be  
stored by feeding it into the opening  
at the back of the food processor  
body. (Fig. 22)  
Fig. 22  
9
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING TO KNOW YOUR FOOD PROCESSOR  
OPERATING INSTRUCTIONS  
Processing Examples  
THIN SLICING  
THICK SLICING  
FINE SHREDDING  
COARSE SHREDDING  
For thin slicing:  
-
-
-
Recommended speed level is High  
(Cucumbers, raw potatoes, lettuce, carrots)  
Recommended speed level is High  
(Cabbage, carrots, onions)  
Recommended speed level is High  
(Carrots, cucumbers, cabbage)  
For coarse slicing:  
For fine shredding:  
For coarse shredding: - Recommended speed level is High  
(Lettuce, carrots, apples)  
CLEANING & MAINTENANCE  
CAUTION:Make sure that the unit is unplugged from power source and speed  
control dial is in the “OFF” position before inserting or removing any  
attachments and before cleaning.  
Never immerse the unit, cord or plug  
in water or any other liquid.  
Hints & Tips:  
The double chopping blade can be  
used for chopping meat, fish,  
Clean the main unit with a damp  
cloth only.  
Only the stainless steel blades can  
be washed in the dishwasher.  
All other parts can be cleaned in  
warm sudsy water using regular  
dishwashing liquid.  
If food has spilled over on to the main  
unit, use the pointy end of the spatula  
to clean the cracks and crevices of the  
base under the food processor bowl.  
(Fig. 19)  
vegetables, cheese, etc. setting the  
speed to maximum.  
1. Main Unit  
11. Spatula  
12. French Fry Disc Assembly  
13. Blade Holder  
14. Fine Slicing Blade  
15. Coarse Shredding Blade  
16. Thick Slicing Blade  
17. Fine Shredding Blade  
18. Whipper  
19. Citrus Juicer Filter  
20. Juice Reamer  
For finer chopping, increase the  
length of time you process.  
2. On/Off Speed Control Dial  
3. Pulse/Turbo Button  
4. Storage Compartment  
5. Processor Bowl  
6. Double Chopping Blade  
7. Processor Cover  
8. Food Pusher  
For coarser chopping, use the pulse  
button for a few seconds and monitor  
food texture.  
Pre-cut larger pieces to make them fit  
into the feed tube. When chopping  
hard foods (e.g. meat, cheese) cut  
into 1 “/2.4 cm cubes.  
For shredding, place food horizontally  
into the feed tube, for slicing place the  
food vertically.  
9. Spindle  
10. Dough Blade  
Technical Specifications  
Fig. 19  
IMPORTANT: Remove  
protective chopping blade  
cover(s) before use.  
Protective blade covers to  
only be used for storage.  
Voltage:  
Power:  
120V., 60Hz.  
800 Watts  
Capacity:  
6 Cups (1.5 Liters)  
Illustrations may differ from actual product  
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
Citrus Juice Filter (cont.)  
4. Insert the juice  
4. Now you are ready to use any of the  
Speed Control Dial  
attachments that come with the unit;  
i.e. the double chopping blade, dough  
blade, etc.  
The food processor speed control dial  
has two speeds settings plus "Pulse" and  
"Turbo".  
reamer into the  
center of the citrus  
juice filter with its  
shaft inside the  
central column of  
the bowl. (Fig. 13)  
1 - Low  
2 - High  
Using The Double Chopping Blade  
Always disconnect unit from power  
source before cleaning or changing  
accessories.  
WARNING: USE EXTREME  
CAUTION WHEN HANDLING THE  
BLADES. THEY ARE EXTREMELY  
SHARP. Always remove protective  
bade cover(s) before using.  
Fig. 14  
Fig. 15  
The speed can be adjusted while the  
food processor is in use.  
Fig. 13  
5. Plug in the appliance.  
6. Place fruit on juice  
reamer and hold with  
a cupped hand.  
Use of the Pulse/Turbo button allows  
greater control over the texture of the  
food being processed. Use "Pulse" when  
the unit is in the "Off" position. Use  
"Turbo" when the unit is in the "On"  
position and you need a burst of power.  
Please note that the "Pulse" and "Turbo"  
is only intended to be used for short  
"bursts" of processing.  
7. Operate at minimum speed.  
WARNING: Always operate the  
juicer at minimum speed only.  
Do not operate the citrus juicer at  
higher speeds.  
Fig. 16  
The double chopping  
blade may be  
used with one  
French Fry Blade Assembly  
Slicing & Shredding Blades  
blade or with  
two blades.  
CAUTION: Make sure that the unit  
is unplugged from the power  
source and the speed control dial is in  
the “OFF” position before inserting or  
removing attachments.  
Note: The French Fry Blade is already  
assembled to the blade holder. Do not  
try to remove it. (Fig. 17)  
1. Fit the processor bowl and spindle  
as detailed previously.  
2. Using the finger holes in the French  
Fry blade holder, fit it over the  
spindle and press firmly into place as  
indicated. (Fig. 18)  
CAUTION: Make sure that the unit  
is unplugged from the power  
source and the speed control dial is in  
the “OFF” position before inserting or  
removing attachments.  
1. Place the blade of your choice on  
the blade holder. Inserting the longer  
tab on the side of the blade first.  
(Fig. 14)  
2. Press the other end of the blade until  
it clicks into place. (Fig. 15)  
3. Fit the processor bowl and spindle  
as detailed on the page 4.  
Fig. 3  
Operating the Food Processor  
1. To use as  
Setting up:  
a double  
blade, carefully  
slip the separate  
blade over the  
shaft of the  
1. CAUTION: Make sure that the unit is  
unplugged from the power source and  
the the Speed control dial is in the  
"Off" position before inserting or  
removing any attachments and before  
cleaning.  
2. Place the food processor bowl onto  
the processor body. There is no need  
to turn the bowl. (Fig. 1)  
3. When fitted correctly, the handle will  
be to the right of the assembly, and  
the ridge on the base of the bowl will  
fit into the slot at the back of the  
processor body. (Fig. 2)  
Double  
Blade  
Main Blade  
main blade.  
(Fig. 3 & Fig. 4)  
Fig. 4  
WARNING: USE EXTREME  
4. Using the finger holes in the blade  
holder, fit it over the spindle and  
press firmly into place as indicated.  
(Fig. 16)  
CAUTION WHEN HANDLING  
BLADES. BLADES ARE SHARP.  
4. Fit the lid and click into place as  
indicated in Setting Up section  
(page 4).  
Two Blades Together  
2. Then insert onto the shaft of the  
processor bowl. Always hold the  
chopping blade by the upper plastic  
part. (Fig. 5)  
WARNING: USE EXTREME  
CAUTION WHEN HANDLING  
BLADES. BLADES ARE SHARP.  
5. Fit the lid and click into place as  
described in the Setting Up section  
(page 4).  
5. Plug in the processor.  
WARNING: USE THE FOOD  
PUSHER TO ADD FOOD INTO THE  
PROCESSOR BOWL THROUGH  
THE FEEDER TUBE.  
Do not overload the bowl. In one  
operation, you can process a  
maximum 6 cups (1500 ml) of food.  
Fig. 1  
6. Plug in the processor.  
WARNING: USE THE FOOD  
PUSHER TO ADD FOOD INTO  
THE PROCESSOR BOWL  
THROUGH THE FEEDER TUBE.  
Do not overload the food processor bowl.  
In one operation, you can process a  
maximum of 6 cups (1500 ml) of food.  
Fig. 18  
Fig. 5  
Fig. 2  
Fig. 17  
4
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
Dough Blade  
Whipping Attachment (cont.)  
Using The Double Chopping Blade  
7. Keep hands and utensils away from  
the cutting blade while chopping  
food to reduce the risk of severe  
injury to persons or damage to the  
food processor. A scraper may be  
used, but ONLY when the food  
processor is NOT running and has  
been unplugged. Never feed food by  
hand. Always use the food pusher.  
(Fig. 8)  
(Cont.)  
CAUTION: Make sure that the unit is  
unplugged from the power source and  
the speed control dial is in the “OFF”  
position before inserting or removing  
attachments.  
1. Fit the processor bowl and spindle as  
described previously on page 4.  
2. Fit the dough blade over the spindle and  
press firmly into place. (Fig. 9)  
3. Place the ingredients into the bowl.  
4. Fit the lid and click into place as  
described in the “Setting Up” section  
(page 4).  
5. Plug in the food processor.  
6. Turn the food processor on selecting  
high speed. Maximum capacity for  
processing dough is based on the  
mixture of 21 oz. (600 g.) of flour and  
14 oz. (400 g.) of water in order to  
obtain 2.2 Lbs. (1 kg.) of dough.  
7. Recommended speed for making dough  
is high.  
8. When it is time to knead the dough,  
place speed control dial in the "Off"  
position and pulse until the dough is  
ready.  
9. Remove the blade from the bowl before  
removing the dough.  
WHEN KNEADING DOUGH, DO NOT  
OPERATE THE MACHINE LONGER THAN  
20 SECONDS. AFTERWARDS WAIT AT  
LEAST 2 MINUTES BEFORE OPERATING  
THE MACHINE AGAIN.  
FOR SAFETY,  
ALWAYS LEAVE  
THE PUSHER IN  
PLACE WHILE  
1. Fit the processor bowl and spindle  
as described previously on page 4.  
2. Fit the whipping attachment over the  
spindle and press firmly into place.  
(Fig. 10)  
3. Place the ingredients  
into the bowl.  
3. Place ingredients to be processed in  
the bowl.  
4. Then holding the processor lid by the  
feeding tube, place the processor lid  
onto the bowl and turn counter  
clockwise to lock the lid in place.  
Ensure that the lid tab has "clicked"  
into place and that the arrow on the  
lid is aligned with the dot on the unit.  
Insert food pusher into feed chute.  
(Fig. 6 & Fig. 7)  
4. Fit the lid and  
click into place as  
described in the  
Fig. 10  
“Setting Up” section (page 4).  
5. Plug in the food processor.  
6. Turn the food processor on  
selecting high speed.  
7. Recommended speed for whipping  
is high.  
8. Remove the whipping attachment  
from the bowl before removing the  
whipped ingredients.  
FOR SAFETY, ALWAYS LEAVE THE  
PUSHER IN PLACE WHILE  
OPERATING THE PROCESSOR.  
Fig. 8  
Fig. 7  
8. When finished processing the  
ingredients, remove the processor lid  
by turning clockwise.  
9. Remove the chopping blade first  
before removing the processed food.  
FOR SAFETY, ALWAYS USE THE  
FOOD PUSHER WHEN PUTTING  
FOOD INTO THE THE FEEDER TUBE.  
NEVER FEED BY HAND.  
10. Do NOT leave the appliance  
unsupervised when it is in the "ON"  
position.  
Fig. 6  
Citrus Juice Filter  
CAUTION: Make sure that the unit is  
unplugged from the power source  
and the speed control dial is in the  
“OFF” position before inserting or  
removing attachments.  
WARNING: Always Operate The  
Juicer At Lowest Speed Only. Do  
Not Operate The Citrus Juicer At  
Higher Speeds.  
5. Plug the processor into a wall outlet.  
6. Turn the speed control dial to the  
desired speed setting.  
PROCESSING EXAMPLES WITH THE DOUBLE CHOPPING BLADE  
The processing times indicated below are approximate and also depend on the  
quantity of the food to be processed and the degree of fineness you require.  
1. Fit the processor bowl  
as detailed previously  
(page 4).  
2. Fit the citrus juice filter  
into the processor  
bowl. (Fig. 11)  
RECOMMENDED  
PRODUCT  
Meat*  
QUANTITY  
OPERATION TIMES  
SPEED  
High/Turbo  
Low  
OPERATING THE  
PROCESSOR.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
21 oz / 600 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
4 slices  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
20 seconds  
Fig. 9  
Onions  
Fig. 11  
3. Rotate counter  
Nuts  
High  
clockwise. Ensure  
that the citrus juice  
filter tab has clicked  
into place. (Fig. 12)  
Fish*  
Pulse  
Cheese  
Liquids (soups)  
Carrots  
Bread  
Pulse  
Whipping Attachment  
CAUTION: Make sure that the  
unit is unplugged from the  
power source and the speed control  
dial is in the “OFF” position before  
inserting or removing attachments.  
Pulse  
pulse  
40-50 seconds  
40 - 50 seconds  
10 - 30 seconds  
10 seconds  
Fig. 12  
Low  
Apples  
24.5 oz / 700 gr.  
Max 4 bunches  
Max 4 cups/1 liter  
High  
Parsley  
Mayonnaise  
High/Turbo  
High  
30 seconds  
* Always allow food to cool before placing in the bowl.  
* Remove all bones before processing.  
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  

Blue Microphones Headphones TIKI User Manual
Bosch Appliances Clothes Dryer WTA 3500 User Manual
Bowers Wilkins Speaker CCM 628 User Manual
Bowflex Home Gym 51370 User Manual
Cadco Convection Oven COL08 User Manual
Campbell Hausfeld Staple Gun CHN10610 User Manual
Carrier Heat Pump 50RLP User Manual
Casablanca Fan Company Fan 6411Z User Manual
Cecilware Coffeemaker GB3P LD User Manual
Century Baby Carrier 10 762 User Manual