TM
BA4800
Powered Speaker System
4-Channel Surround Configuration
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Front Speaker Assembly
1
a) Connect the left front speaker's plug into the jack
on the rear of the right front speaker, (NOTE: satellite
speaker with audio controls should be on the right side
of your video monitor).
b) Making sure speaker cables are free, slide on front
speaker pedestal stands.
c) Attach rubber pads to bottom tips of each pedestal
stand. The rubber pads absorb vibrations between the
speakers and the desktop for a cleaner sound.
b
a
c
2. Input Panel Connections
a) Connect the right front
satellite's control cable (blue) to the
"Control" jack (blue) on the back of
the subwoofer.
2
Right front speaker
b) Connect each of the audio
input cables (2 ea.) to your PC's
sound card. "Front Analog in"
(green) on the back of the sub-
woofer to the front analog output
on the sound card (usually labeled
"front", "1" or green). "Rear Analog
in" (purple) on subwoofer connects
with control pod
a
to the sound card's rear analog
output (usually labeled "rear", "2"
b
or black).
Back of subwoofer
Back of computer
SCALE
0.500
Apply subwoofer's rubber pads to each corner
3. Rear Speaker Assembly
3
a) First, snap on the slide caps to
the top of each tower tube. Then feed
the connection cord from each
speaker down through the tube. Next,
slide each satellite speaker on to top of
tower tube, making sure the cords are
not being pinched. Finally, with the
cord passing through the bottom of
the tower tube, slide on each of the
three stability legs. The cord should
pass freely through the intersection of
the three stability legs.
21
a
b
b) With each of the two tower speaker
Back of subwoofer
cords passing down through the tubes,
SCALE
0.500
connect each plug to the respective
right and left "Rear Speaker" jacks on
the back of the subwoofer (red to red
and white to white).
c
c) Plug in power cable/transformer into
Stability legs
back of subwoofer and available AC outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
For one year from the date of purchase, Boston Acoustics will repair for the original owner any defect in
materials or workmanship that occurs in normal use of the speaker system, without charge for parts and labor.
Your responsibilities are to use the system according to the instructions supplied, to provide safe and
secure transportation to an authorized Boston Acoustics service representative and to present proof of
purchase in the form of your sales slip when requesting service.
Excluded from this warranty is damage that may result from abuse, misuse, accidents, shipping, or repairs
or modifications by anyone other than an authorized Boston Acoustics service representative.
This warranty is void if the serial number has been removed or defaced.
This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.
If Service Seems Necessary
Please contact the retailer from whom you purchased the system. If that is not possible, write to:
Boston Acoustics, Inc., 300 Jubilee Drive, Peabody, MA 01960, or call 1-(978)-538-5000.
We will promptly advise you of what action to take. If it is necessary to return your speaker to the factory,
please ship it prepaid. After it has been repaired, we will return it freight prepaid in the U.S. and Canada.
Notice of FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna
-- Increase the separation between the equipment and receiver
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-- Consult the dealer or an experienced radio/TV technician for help
© Copyright 1999 Boston Acoustics, Inc. All rights
reserved. BA4800 is a trademark and MagnaGuard,
Boston, and Boston Acoustics are registered
trademarks of Boston Acoustics, Inc.
300 Jubilee Drive
Peabody, MA 01960
(978) 538-5000
Specifications subject to change without notice.
Part# 042-001133-0
Download from Www.Somanuals.com. All Manuals Search And Download.
|