Download from Www.Somanuals.com. All Manuals Search And Download.
00
Contents
On Screen Display 35
Program Playing 35
Eject SD Card 35
Eject USB 35
9
AUX
AUX Touch Screen Menu 42
10
IPOD
IPOD Operation 43
7
Tuner
Listening to the Radio
Selecting Tracks
43
36
Playing Track F.F/F.REW 43
Switch 43
Repeat Playing 43
Playing Tracks at Random 43
Pause the Playback 43
Band Selector 36
Manual/Automatic Tuning 36
DX/LOC Selector 36
Selecting The stored Station 36
MO/ST Selector 37
File Selector
Video or Picture Mode 44
Eject IPOD 44
44
AMS 37
Automatically
Number Buttons 37
On Screen Display 37
Goto FREQ 37
37
11
Additional Information
Simple Troubleshooting Guide
45
8
Bluetooth
Bluetooth Operational Interface 39
Using a Bluetooth Wireless connection 39
Pairing Your Unit and Bluetooth Phone 39
Pairing in Handsfree Mode 39
Cellphone Pairing Mode 40
Bluetooth Connection and Disconnection 40
Using the Unit as a Handsfree Devic 40
Last Number Dialing 40
To Dial by Cellphone 40
To Dial by the Unit
41
Using the Unit as Bluetooth Music 41
Audio Transfer between The Unit and
Phone 41
3
Download from Www.Somanuals.com. All Manuals Search And Download.
11
01
Before You Start
Additional Information
IMPORTANT SAFEGUARDS About this manual
Common Symptoms
There is no power.
Cause
Solution
If the power supply is properly connected to
the car accessory, switch the ignition key to
ON or ACC.
The car ignition is
switched off
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
DISC/VCD/CD/MP3/MP4/SD operation
that can only be operated by the remote
control, but there are also functions that
can be operated by the buttons provided
for the main unit.
1
Be sure to connect the color coded wires
according to the diagram. Incorrect con-
nections may cause the unit to malfunct-
ion or damage the vehicle, s electrical sy-
stem.
Replace with same amperatge fuse rate.
Remove the disc from the player
The fuse has blown.
There is another disc inside
the player
The disc cannot
be loaded.
Insert the compact disc with the label facing
upward
2
Be sure to connect the speaker (-) wires
to the speaker (-) terminal. Never conn-
ect the left and right channel speaker c-
ables each other or to the vehicle body.
Inserted disc is upside down
The device does not
work correctly
(EJECT, LOAD,
PLAY)
The surface of disc is extre-
mely dirty,Scrached or
damaged.
Clean the disc or try another disc,if the new
disc works correctly,the first disc is damaged.
3
4
Make sure all the connections are comp-
letely correct before turning on your unit.
Cool off untilthe ambient temperaturereturns
to normal.
Temperatureinside the caris
too high.
When replacing the fuse(s), the replace-
ment must be of the same amperage as
shown on the fuse holder.
The volume controlis set too
low.
Turn up thevolume properly.
There is nosound.
Check the connections according to
the wiring diagram.
The device hasnot been wired
correctly.
Do not block vents or radiator panels.
Blocking them will cause heat to build up
inside and may result in fire.
5
1. The built-inmicroprocessor
is not operating properly.
2. Front panel is not properly
attached into its place
1. Switch the device off andon again or press
the RESET button.
2. Remove and reinstall the front panel.
The operation keys
do not work
6
7
To lessen the driver's distraction, install
the unit in an appropriate place.
Adjust the installation angle to less than 30
degrees
The installation angleis more
than30 degrees
Power the unit on after starting the engine
otherwise it will shut off due to lack of
power.
Wait until theroad becomes smoother before
playing the disc.
The sound ofthe
disc player skips
The surface ofthe road is
uneven.
The surface ofdisc is extremely
dirty,scrached ordamaged.
Clean the discor try anotherdisc, if thenew
disc works correctly, the firstdisc is damaged.
8
9
Do not place the remote control in a place
susceptible to high temperature or direct
sunlight. Doing so will damage the remote.
Insert the antennacable firmly intothe antenna
socket of theunit.
The antenna cableis not
connected.
No radio reception.
Do not use the unit in extremely high or
low temperatures. Also avoid high humidity
and direct sunlight.
In automatic search
mode the radio does
not stop ata trans-
mitting station.
The transmission signals are
too weak.
Tune in toa radio station manually.
10
11
Take care of the magnetism of the unit.
Do no put the credit card, cassette or w-
atch around the unit.
To minimize disturbance of the video
frequency, keep far away from the unit
when using your phone.
4
45
Download from Www.Somanuals.com. All Manuals Search And Download.
01
10
IPOD
Before You Start
File Selector
During IPOD mode, press
Eject IPOD
PRECAUTIONS
MENU
in the monitor
to go back to the previous catalog.
If the iPod is removed during iPod mode, the
unit will automatically switch to radio mode.
This unit can play the following DISCs only:
Type of disc
DISC
Recorded material
Size of disc
Press
5 tracks, press
(show as in the right of the picture).
in the monitor to select the previous
to select the next 5 tracks
Sound and moving pictures
Sound and moving pictures
Sound only
VCD
CD
Playlist
Artist
Album
Genre
Track
Sound only
MP3
Sound and moving pictures
MPEG-4
Note:
This function is operated by using the touch
screen only.
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
*
When driving, do not attempt to
modify the unit. Modifying the
unit may cause an accident.
Video or Picture Mode
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
VIDEO
During IPOD mode, press
to select
video or audio. Video and picture can be
played at this time.
The unit and the remote control can not be
operated in this mode, you can just operate
IPOD to select video and picture.
Do not turn the unit on in extre-
mely high or low temperature.
Be sure the temperature inside
the vehicle is between +60 C
and -10 C before turning on your
unit .
Note:
*
*
This function is operated by using the touch
screen only.
The IPOD TV should be set ON in this
function.
To enjoy optimum sound and
images while playing, handle the
DISCs as follows:
*
Video playback requires Gen 5.5 or earlier
Photo or Video iPod. iPod Touch, iPod Cl-
assic, and iPod Nano with video will only
play music files.
44
5
Download from Www.Somanuals.com. All Manuals Search And Download.
10
01
IPOD
Before You Start
Note:
IPOD Operation
Maintenance
*
Pressing and holding
/
in the monitor
also performs the same function
During IPOD playback, connect the IPOD
wire (5V) to the one in backside of the main
unit. When the iPod is loaded, the unit will
play a track. To go back to the source status,
press iPod to enter into iPod setup:
Switch
Replacing the Fuse
VIDEO
During playback, press
to turn to
Makesuretheamperagematchesthe
specifiedvaluewhenreplacingthefu-
ses.Ifthefuseisblown,replaceitwith
anewone.Besureyouareusingone
withthecorrectrating.Ifthesame
problemoccurs,itwouldbesubjected
tothemalfunction.Insuchcases,
pleaseconsulttothenearestservice
dealer.
IPOD, the screen shows: Play video on your
iPod. Then touch screen to return. Then
VIDEO
Insert the Battery Holder into the Remote
Control.
you can operate your iPod. Press
to return to main unit operation.
again
8/97
Note:
disco-yeye
*
This function is operated by using the touch
screen only.
00:02:47
Repeat Playing
15
During playback, press
RPT to track
!
Warning
MENU
Back to the previous menu
repeat, disc repeat, off. Press it again to
cancel this function.
Neverusethefusewiththerated
amperagemorethanthatsuppliedto
yourunit,otherwiseitwilldamagethe
unit.
PrecautionsonUsingLithium
Battery
Briefly press to play previous track,
press and hold to fast forward.
Note:
*
This function is operated by using the remote
control only.
Briefly press to play next track,
press and hold to fast rewind.
Alwayskeepthelithiumbatterybeyond
children sreach.Incase
swallowed,seeadoctorimmediately.
Play/ pause
Playing Tracks at Random
Replacing the Remote Battery
VIDEO
Mode switch between IPOD and
main unit
Cleaningthebatterywithadrycloth,
toensureitsperfectconnected.
16
During IPOD playback, when pressing
RDM button, Shuffle off, Shuffle Track,
Shuffle Album will be activated.
Whentherangeoftheoperationof
the remotecontrolbecomesshort
orstopsoperating,Replacethebattery.
BesuertousealithiumBatterybutton
CellCr2025.
SRC
Mode switch
Installthebatterywiththeproperpolarity.
Note:
Selecting Tracks
Topreventshortcircuit,donotuse
metaltweezertohandlythebattery.
*
This function is operated by using the remote
control only.
21
DuringIPODplayback,press
returntothebeginningofthecurrenttrack,
to
21
press
previoustrack,press21
againwithin3secondstoplay
toplaynexttrack.
!
Warning!
Improperhandlewiththebatterymay
leadtoexplosion.
Pause the Playback
Gently pull out the Battery Holder while
pressing the Stopper.
27
During IPOD mode, press
button to
Note:
pause the playback, Press it again to return
to normal playback.
Itcannotbecharged,disassembledor
thrownintoafire.
*
Pressing
the same function
/
in the monitor to performs
Note:
Press
in the monitor or briefly press
*
Playing Track F.F/F.REW
SEARCH+/- on the head unit also performs
the same function.
Press and hold
or
to play the track
20
Putthebutton-typebatterywithmark(+)
upwardintotheBatteryHolder.
fast forward or fast rewind . Do it again or
press ENTER to resume to play normally.
6
43
Download from Www.Somanuals.com. All Manuals Search And Download.
01
09
Before You Start
Location of the Controls
Front Panel
AUX
AUX Touch Screen Menu
Press SRC to switch to the AUX mode:
AV SET
VOL-
VOL+
In AUX mode, select AV SET:
AUDIO ADJUST
VIDEO ADJUST
VIDEO FORMAT
EXIT
The Base
AV SET
For more details to adjust AUDIO, VIDEO
and SYSTEM (Auto 1: PAL, NTSC, SECAM),
(Auto 2: P-M, P-N). Please refer to pages 19 to 20.
To decrease the volume
To increase the volume
Mode selector
42
7
Download from Www.Somanuals.com. All Manuals Search And Download.
08
01
Bluetooth
Before You Start
7
REL Button
1
To Dial by the Unit
Audio Transfer between the Unit
and Phone
SRC/PWR
Briefly press it to slidedown the monitor, then
you can insert or eject a disc or a SD card.
If you press and hold, the monitor shows
ANGLE. Then press +/- to adjust angle.
During waiting mode, briefly press it to turn
on the unit; during working status, briefly
press it to select radio mode or playback mode/
press and hold it to turn the unit on or off.
23
When cellphone is connected, press
input the call number, then press
30
to dial. DIAL OK will appear. When the call
is picked up, PICKED UP appears.
to
6
Press
the unit to the cellphone.
to change the conversation from
8
9
RES Button
Note:
2
3
BAND / + (Bands selector / Increase) Button
Note:
Press it to set the unit to initial status.
During radio mode, press it to select bands,
press and hold REL until ANGLE appears to
adjust angle backward.
* The function might cause the bluetooth to be
disconnected for some phones. If this happens,
press the
paired back automatically.
*
*
Press
8
CLEAR on the remote control or
22
in the monitor to delete wrong inputs.
(Eject) Button
6
button while on the call to be
Press it to eject a disc.
Pressing
same function.
in the monitor also performs the
MUTE / - ( Mute / Decrease ) Button
10
Disc Loading Slot
Press REL first before you load the disc.
Briefly press it to mute; press and hold it to
switch to the night mode; press and hold REL
until ANGLE appears to adjust angle forward.
Using the Unit as Bluetooth
Music
11
12
Common SD Card Slot
4
5
REMOTE Infrared Sensor
MIC(microphone of bluetooth mode)
During bluetooth mode, the music on the
cellphone will play through the unit.
To select music fast: press21
the previous track, press
one.
SEL/MENU Button
Briefly press it to select the function; press
and hold it to display the main menu.
to play
to play the next
6
VOL + / VOL -
Pause play: press 17
Stop play: press 18
press the PLAYto return to the beginning
of the current track.
to pause play.
to stop play, and
Press VOL + / VOL - to increase or decrease
the volume, and pressing them will also be
used to adjust Balance, Fade, Bass and Treble.
Note:
*
This function is only valid on the remote control.
8
41
Download from Www.Somanuals.com. All Manuals Search And Download.
01
08
Bluetooth
Before You Start
*
*
Pressing
same function.
5
in the monitor also performs the
Cellphone Pairing Mode
Remote Control
7
1. Browse your cellphone menu and find
the connectivity or Bluetooth connection
section.
Press in the monitor to turn off the
bluetooth function.
26
25
2. Select search for a new handsfree device
function and allow the phone to find the
mobile.
(Different cell phones have different blue-
tooth menus, please refer to your phone
manual.)
3. When CAR A/V DEVICE appears, select
this item.
( if it can not be connected, please refer
to mobile manual, and connect it again.)
4. To input the password, the password is:
1234.
Using the Unit as a Handsfree
Device
24
23
1
2
When the unit is ringing, the display will
show CALL FROM and the phone number
********** .
To accept call: Press
the display will show PICK UP.
to answer a call,
30
3
4
5
31
To reject call: Press
the display will show REJECT.
To end call: Press to end call,
to reject a call,
22
27
the display will show HANG UP.
20
6
5. Press the connect with the Handsfree
option on your cellphone, CONNECT
appears.
Note:
21
19
*
*
Some of cellphones do not support reject
call during bluetooth mode.
7
8
9
Pressing
performs the same function.
and
in the monitor also
Bluetooth Connection and
Disconnection
18
17
16
15
14
10
11
13
When you established a bluetooth connection
between this unit and the cellphone, the blue-
tooth icon on the display appears in red.
Last Number Dialing
30
12
28
Press
apear, press
OK appears on the display during
button, last call number will
29
Press
tion, and
29
Press
PAIR to turn off bluetooth connec-
appears in blue.
, PAIR SUCCESS will appear on
again, and then REDIAL
31
conversation.
the display. When the bluetooth is connected,
the display will show CONNECT. When the
Bluetooth is disconnected, the display will
show PAIRINGTIME OUT.
Note:
29
30
*
Pressing in the monitor also performs
the same function.
Tips:
For more information on replacing battery, please refer to Replacing the Battery
on page 6.
To Dial by Cellphone
Note:
*
*
Make sure the phone battery has good power.
If not, the connection quality may be affected.
To ensure connection succeed
1. When you make a call by cell phone, the
unit will automatically be activated. DIAL
OK will appear on the display.
2. When you receive a call, PICK UP appears
on the display.
----Please selete menus of cellphone with bluetooth.
----Please reset the unit and cellphone.
----Please reset every step of pairing.
* Disconnect after paring
----Please pair the phone manually.
For example: pairing fixture cellphone connect.
40
9
Download from Www.Somanuals.com. All Manuals Search And Download.
08
01
Before You Start
Bluetooth(optional )
(Pause/Play)
17
Bluetooth Operational Interface Using a Bluetooth Wireless
1
2
SOURCE/PWR
Connection
28
Press BT on the remote control or BT on
(Stop Playing)
18
GOTO (playing time/track)
the monitorr to open the bluetooth operational
interface:
Thedevicecanbedialedwirelesslyinbluetooth
status.Beforeusingthebluetoothfunction,
pleaseturnonyourcellphonebluetoothfunc-
tion.
19
20
SETUP
3
4
5
6
7
8
BAND/TITLE
AMS/MENU
LOC/SUB -T
ST/AUDIO
(F.R/F.F)
21
22
23
24
25
26
(Previous/Next Track)
Note:
*
To provide the best sound without or little
distorted sound(Some reverberation or
sidetone is caused by cellphone or network
itself.).
CLEAR
0~9( Number) Buttons
(Eject Button)
*
*
*
Perfect bidirectional conversation.
Bluetooth ver2.0 compliant.
Please well connect microphone to the unit
before connecting bluetooth.
PTY/ANGLE(Program type/DVD play
angle)
TA/LOUD (TrafficAlarm/Loudness)
OSD
1
NumberButtons
To input the phone number.
During DISC mode, briefly pressit to show
the current information, press and holdit
to turn off. During radiomode, press this
button to show the version number.
AF/EQ (Alternative Frequency/Equalizer)
Button
Pairing Your Unit and Bluetooth
Phone
(Left/Right/Up/Down
ENTER
ENTER)
27
2
3
Diallastcall,answeracall
Hangup,refuseacall.
NumberShow
The device supports handsfree profile, head-
set profile, A2DP( Audio Advanced Distri-
bution profile)and AVRCP(Audio Video
Remote Control profile). Follow the pairing
instruction for the first time use, after that
the unit will connect automatically.
BT (bluetooth mode)Button
28
29
9
ZOOM (zoom in or zoom out)
(Slow Forward/Reward)
PAIR
During bluetooth, press to pair.
4
5
6
10
11
12
PAIR
30
31
P/N (SystemAdjusting)
Mute
During bluetooth, press to dial, dial again
or answer a phone.
ACH(audiochange)
Note:
Some phones can switch the audio from the unit
to the phone.
Pairing in Handsfree Mode
*
13
14
PROG(Program playing)
During bluetooth, press to hang up or refuse
a phone.
5
1. Press
PAIR, PAIRING shows on
VOL+/VOL-/SEL
7
POWER
Press it to turn on or turn off the bluetooth
function.
the screen.
2. CELLPHONE CONNECTION to search
fixtures;
15
16
RPT(Repeat Playing)
RDM (Playing Tracks at Random)
3. If the cellphone has connected, PAIR
SUCCESS appears, then CONNECT ,
will change from blue to red.
8
9
C(clear)
BACK
Note:
*
Pressing on the monitor also performs
the same function.
10
39
Download from Www.Somanuals.com. All Manuals Search And Download.
01
08
Tuner
Before You Start
Alternative Frequencies
Specifications
RDS Setup
26
Briefly press AF to activate the auto
3
2
1
searching station function. When AF is on,
the unit will skip to the RDS Frequency
with good signal.
RDS
87.50MHz
General
AM Tuner Section
:
SCH
NONE
OFF
7
Frequency Range
(Optional)
Power Requirement
522-1620(KHz)
14.4V DC
(11-16V allowable)
Note:
OFF
4
5
(Europe)
530-1710(KHz)
(U.S.A.)
1
It is also performed by pressing
monitor.
in the
*
NONE
9
10
OFF
OFF
Load Impedance
Max.Power Output
Tone Controls
IF Range
85W X 4
450KHz
Traffic Alarm
Usable Sensitivity 32dBuV
(-20dB)
7dB
8
6
25
Briefly press
TAto activate the traffic
Bass100Hz
Treble10KHz
alarm function. When AF is on, there is TA
displayed on the LCD. If there is no TP, the
mode will search TP stations automatically.
1
2
3
4
AF(Alternative Frequencies)
Press it to activate AF function.
VCD/CD Player Section
TA (Traffic Alarm)
Press it to activate TAfunction.
Approx.184x178x100
mm (d/w/h)
Dimensions
The TA is green when it is played by a sta-
tion, if not, it is yellow.
VCDSignalSystem
Signal-to-noise Ratio
Separation
AUTO/PAL/NTSC
60dB
Approx.164x183x112
(d/w/h)
mm
Mounting
Dimensions
When TAis playing, the volume will be ad-
justed to a TAlevel automatically When in
other modes (such as DISC,AUX), if a TA
program is played, the mode will skip to the
RDS status automatically. It will resume to
the primary mode after the TAis over.
Press it to select PTY code.
55dB(1KHz)
0.3%
PTY(Program Type)
Press it to activate PTY function.
Distortion
Weight
Approx.3.5kg
During PTY ON, press this button to
search the playing track s type.
BACK
5
6
7
Resolution
1440X234plxels
600NITS
Brightness
FM Section
Press it to turn to return to the radio.
Note:
PS:
To display the current RDS station's
programs information.
DISC Player Section
2
2
It is also performed by pressing
monitor.
in the
*
*
Tuning Range
(Optional)
87.5-108(MHz)
(Europe)
DISCSignalSystem
Channels
AUTO/PAL/NTSC
2
When TA is off, the LCD will not display TA.
87.5-107.9(MHz)
(U.S.A.)
SEEK+/-
Press it to tune automatically.
8
9
Frequency Response
Signal-to-noise Ratio
Separation
40Hz to 16KHz
60dB
Program Type
TP(Traffic Program)
TP OFF: the current station doesn't have
any trafic programs
TP Search Search for stations with traffic
programs
IF Range
10.7MHz
10dBuV
7
Briefly pressing
function.
When PTY is on, PTY ON appears in the
monitor. You can press UP/DOWN
to select the program type, and then press
PTY CODE to search the special program.
The monitor displays PTY SEARCH.
PTY to activate PTY
60dB
Usable Sensitivity
(-30dB)
TP ON: the current staion is broadcasting
trafic program
Note:
Signal-to-noise Ratio
Stereo Separation
60dB
Due to continuous product improve-
ment, specifications and design are
subject to change without notice.
10 EON ON(Enhanced Other Networks
information)
30dB 1KHz
40-12KHz
Frequency Response
If PTY is off, PTY OFF appears in the
monitor and the searching is disabled.
EON OFF: No station has TP;
EON ON: RDS signal finds that another
station is broadcasting trafic program and
reminds the user of searching this station.
Note:
4
It is also performed by pressing
monitor.
in the
*
38
11
Download from Www.Somanuals.com. All Manuals Search And Download.
02
07
Tuner
Installation
MO/ST Selector
Number Buttons
Wiring Connection
(Light Grey line with
yellow head)
Rear Monitor 2
IPOD connection
(Optional)
(Thick White Line
with White Head)
During radio status, press Number Buttons
to receive the stored stations.
(+5V)
During radio status, you can press
button on the remote control to select MO-
NO mode or STEREO mode.
ST
6
(Light Grey line with
red head)
(Light Grey line with
white head)
(Light Grey line with
yellow head)
Rear Zone Out 2/R
(Brown line with
brown head)
SUB-W RCA
Rear Zone Out 2/L
During radio status, Number Buttons
(Brown line with
yellow head)
Rear View
Camera Input
Rear Monitor 1
23
(from 1 to 6)
can help you store yo-
Stereo reception is on when Stereo
appears.
(Black line with
yellow head)
(Light Grey line with
red head)
(Light Grey line with
white head)
(Dark Grey line with
red & white head)
VIDEO IN
Rear Zone Out 1/R
Rear Zone Out 1/L
ur favorite station. You can follow the steps
as below:
(Black line with
red & white head)
AUX IN R/L
It is switched to MONO mode when Mono
appears.
1
2
When turned to a station,press and hold
FRONT RCA Line
OUT R/L
Black
Black
USB
any one of the Number Buttons
REAR RCA Line
OUT R/L
(Light Grey line with
red & white head)
ANTENNA
Note:
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
It is only valid on remote control.
*
Switch to MONO compulsively to improve
the listening quality when week signal.
*
It is only valid in FM.
*
Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number
button.
3
4
AMS
2
During radio status, briefly press 4 AMS
button on the remote control to scan each
stored station 6 seconds respectively which
Note:
5
Pressing
function.
in the monitor performs the same
23
are stored in Number Buttons (from 1
*
1
to 6). When you can press the corresponding
Number Buttons or AMS button when your
desired station is on, it will stop on that
station.
On Screen Display
8
During radio status, briefly press
to display the edition information. The preset
frequency displays as the default setting.
OSD
4
When you press and hold AMS button for
Rear View Camera
Input Trigger
Black
Brown
Orange
Ground
more than 2 seconds, it will automatically
activate the memory storing function. The
radio automatically selects a station and
has it stored in any one of the Number
Buttons (from1 to 6).
Note:
Parking Brake
Red
Ignition Key
Pink
Blue
Front Illumination
Control(+12V)
Yellow
Black
23
Battery +
Ground
Goto FREQ
Antenna
power +
2
Press
GOTO, and the monitor shows FREQ.
Then press the number to input the valid
frequency as 100.00,. The program will then
be played.
Violet/Black
Violet
Rear R
Speaker
-
Green/Black
*
The unit can store up to 6 stations for
Rear L
Speaker
-
+
+
each band.
Green
7
*
Pressing
in the monitor also performs
Note:
Grey/Black
Grey
Front L
Speaker
White/Black
Front R
Speaker
-
the same function.
-
+
+
It is only valid on remote control.
*
*
White
It is only valid when GOTO FREQ is ON in
main menu.
Output Plug(Male)
Output Socket(Female)
1
3
Fan window
2
12
37
Download from Www.Somanuals.com. All Manuals Search And Download.
02
07
Tuner
Installation
Installation Method
DIN Front-Mount
1
Band Selector
Listening to the radio
3
During radio status, repeatedly press
BAND button to select bands in the
following order:
1
2
3
FM1
P . CH:1
87.50MHz
Bend these claws
outward for a tight fit,
if necessary.
FM1
FM2
FM3
4
AM2
AM1
87.50M
87.50M
(For Two Bands)
90.10M
98.10M
107.90M
5
Note:
Pressing
112
106.10M
2
*
in the monitor or BAND on the
main unit also performs the same function.
Manual/Automatic Tuning
6
7
8
9
Manual Tuning: Press
on the remote control continuously to select
a station downward or upward respectively.
(
or ) button
1
Band Indicator
Shows which band the radio is tuned
to.
Fire Wall
Push in the unit
Automatic Tuning: Press and hold
(
or
To support the unit
2
3
Preset Number Indicator
Shows what preset has been selected.
) button for more than 3 seconds, the ra-
dio automatically searches a station down-
ward or upward respectively and plays when
it finds a station.
Frequency Indicator
Shows which frequency the tuner is
tuned.
Note:
4
Pressing
function.
in the monitor performs the same
*
SEEK+/SEEK-
4
5
Briefly press to tune by the presettable
range, press and hold to tune automatically.
DX/LOC Selector
2
Installation Method
The6stationsofthecurrentband.
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
5
During radio status, press
LOC button
to select strong or weak station reception.
LOC appears on the display and only
local station is available. when it disappears
both distance and local stations can be
received.
Installation using the screw holes at
the sides of the unit.
Bracketsupplied
toyourcar
6
7
BAND(AM/FM)
To select the bands.
Select a position where the screw holes of
the mounting bracket supplied with the car and
the screw holes of the main unit become aligned
(are fitted), and tighten the screws (see at 2 pla-
ces on each side). And then fasten them to the car.
Note:
AMS
Briefly press to scan the current station,
hold and press to search the stored station
automatically.
The function is only valid on remote control.
The function is invalid in AM band.
*
*
Selecting the Stored Station
8
9
RDS
Press it to enter the RDS MENU.
27
During radio status, press
button to
SRC
Press this button to select the signal
source.
select the stored station upward, press to
select the stored station downward.
Dashboardor
Console
Note:
The function is only valid on remote control.
*
36
13
Download from Www.Somanuals.com. All Manuals Search And Download.
06
02
CD/MP3/SD/USB
Installation
2.Insert the keys supplied to the unit at
Pause the Playback
Program Playing
Detach the Unit
both sides of the unit (shown as illustrated)
until they click. Pulling the keys makes it
possible to remove the unit from the dashboard.
13
During CD/MP3/SD/USB playback, Press
to switch between play and pause.
During CD mode, press PROG, the TFT
displays the program menu. Press NUMBER
BUTTONS to select the track Number and
Note:
Detach the front panel before disassembl-
ing the unit.
27
then press
to move the cursor to START.
*
Pressing
in the monitor also performs the
Press ENTER to start program playing.
Move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
same function.
1.Take out the Outer Trim Frame.
to
move the cursor to
the next page. During this process, press
to cancel the program playing.
and press ENTER to the previous page;
Skip backward/forward/F.F
/F.REW the playback
and press ENTER to
18
Press
perform fast rewind or fast forward.
(
or ) on remote control to
20
Note:
The function is only valid on remote control.
*
*
2 X
4 X
8 X
16X
22
Press
CLEAR to clear the mistake input.
Note:
Eject SD Card
*
This function is operated by using the remote
control.
Push SD card to eject it.
During SD Mode:,ejecting the SD card will
switch the unit to DISC mode. If there is
no disc, the unit will switch to USB Mode.
If no USB, the unit will switch to Radio mode.
On Screen Display
During CD status, press OSD button the
display shows:
Eject USB
Single elapsed
Single remain
Pull out the USB to eject it.
Total
elapsed
Total
remain
During USB Mode, removing the USB will
switch the unit to Disc. If there is no DISC,
it will switch to Radio mode.
MainPartsList
Note:
*
This function is operated by using the remote
control.
M 5 x 5
4 Screws
M 5 x 20
5 Screws
Mounting Sleeve x1
Rear Mounting Bolt x1
Harness Rubber x1
9
Keys x 2
Steel Bar x 1
USB Connecting Wire
(optional)
Connecting Wire x1
Outer Trim Frame x 1
14
35
Download from Www.Somanuals.com. All Manuals Search And Download.
03
06
Common Operations
CD/MP3/SD/USB
Note:
To Select Source by Menu
Selecting Tracks
Selecting Track
*
Pressing PWR button on the main unit also
performs the same function.
In any mode, press SRC in the monitor, the
following menu will appear:
21
DuringMP3/SD/USBplayback,press
21
2
During CD playback, first press GOTO,
toplayprevioustrack,press
nexttrack.
DuringCDplayback,firstpress
toplay
and TFT shows : DISC go to:--:--,press your
desired time of the playback by using num-
ber buttons.
Then press GOTO button, track go to:--:--
appears on TFT, now input your desired
numbers to play the current time of your
selection.
Volume Control
21
to
returntothebeginningofthecurrenttrack,
press 21 againwithin3secondstoplay
21
previoustrack,press
Press 14 VOL+ button to increase the
sound level and press VOL- button to
decrease the sound level.
FM
14
toplaynexttrack.
Note:
Note:
2
During MP3/SD/USB mode, first press
*
*
Pressing
the same function.
In CD/MP3/SD/USB mode, you can press
track's Number or name to play.
and
on the monitor perform
* Pressing VOL+/- on the main unit or VOL+/-
in the monitor performs the same function.
GOTO and the TFT shows:---. Then press
NUMBER BUTTONS to input the MP3/SD
track's Number to play it; then press GOTO
button, and the TFT shows : --:--, now input
the desired time to play the current track at
this point.
Setting the Sound Characteristics
Press it to select your desired item: FM,
DISC, IPOD ,SD Card, USB, BT,AUX, and
press SET to enter into the main menu. If
you want to enter into bluetooth, press
BT; if it does not enter into, that means the
unit does not include the function. In any
mode, press SRC to return to the previous
mode. Press BACK to return to previous
mode.
Repeatedly press 14 SEL button to select
the desired mode in the following order:
Repeat Playing
Note:
During CD/MP3/SD/USB playback , press
15
RPT to replay the current track, press
it again to cancel this function.
*
This function is operated by using the remote
control.
22
CLEAR to clear the mistake input.
*
Press
After selecting the desired mode, you can
adjust the current level by pressing VOL
14
buttons.
Notes:
Note:
*
*
This function is operated by using the remote
control.
The default setting is Disc Repeat.
Note:
* If the font display in cyan, that means this does
not have this function.
Stop Play
* Pressing VOL+/- and SEL on the main unit
also performs the same function.
During CD/MP3/SD/USB playback, Press
to stop the playback.
18
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
Number Buttons
Note:
Pressing
function.
EQ Setting
*
in the monitor performs the same
23
Press one of Number Buttons(0~9) to
select a track to play automatically.
While listening to the popular music, classic
music or rock music, you can select the co-
rresponding preset modes to adjust the sou-
nd quality perfectly by using 26 EQ button.
8
Remove the front panel, then press
RES
Note:
button in the panel with a pointed object,
(such as a ballpoint pen) to set the unit to
initial status.
Playing Tracks at Random
*
*
Press track region and the screen shows the
number keys, touch the number to select tracks.
During CD/MP3/SD/USB playback, press
22
Press
CLEAR to clear the mistake input.
26
Repeatedly pressing 3 EQ button to choose
the following modes in turn:
Notes:
16
RDM button on the remote control to
* When some errors occur on the display, you can
also press RES button to resume to normal.
It will erase the clock setting and some me-
morized functions.
play any track at random under the directory
which you select. Press it again to return to
normal playing.
POP
CLAS
ROCK
OFF
*
This function can only be operated by the
main unit.
Note:
The default setting is OFF.
*
This function is operated by using the remote
control.
Note:
Turning the Unit On/Off
*
This function is operated by using the remote
control only.
1
Briefly press PWR button to turn on the
unit, during working status, press and hold
it to turn off or turn on the unit.
34
15
Download from Www.Somanuals.com. All Manuals Search And Download.
06
03
Common Operations
CD/MP3/SD/USB
Track Region:
Press this region and the screen
shows the following menu:
number keys appears, touch the
number to select tracks.
Turning Loudness On/Off
Mute Function
CD/MP3/SD/USB Setup
12
Press
output, and
During CD playback, touching the screen
shows the following menu:
25
button to shut off the sound
appears on the LCD.
Press and hold
LOUD button to activate
the loud function. Pressing the button will
increase the low frequency. Press it again
to quit this function.
Track region
Touch the " X " to exit this menu.
Press it again to resume to previous volume
level.
CD
00:00 00:00
001/105
01:18
Track 03/16
MP3
Note:
Note:
CD
CD
CD
CD
CD
CD
01 Track
02 Track
03 Track
04 Track
05 Track
06 Track
MP3
MP3
MP3
MP3
MP3
MP3
Demo
amour
Briefly pressing MUTE on the main unit also
*
performs the same function.
1
4
2
5
8
0
3
6
9
X
This function is operated by using the remote
control only.
*
Automatic
Be natural_s_e
Can you celebr
clon_bing bing
7
--
Night Mode
Eject a DISC
3
Press and hold
MUTE button to enter
Briefly press while the TFT is slanted to
eject a disc or the TFT will return to the
initial status.
the night mode, press it again to switch to
the normal mode.
During MP3/SD/USB playback, touching
the screen shows the following menu:
Track region
Note:
Note:
CD/MP3/SD/USB Operation
*
Pressing on the remote control also performs
the same function.
00:00 00:00
001/105
* This function is operated by the main unit only.
Insert a CD/MP3 disc into the slot, the unit
will play automatically.
Press REL after turning the unit on, then
insert a SD card when the TFT is slanted and
the programs in the card will be played.
From the back of the main unit insert the
USB and programs in the USB will be pl-
ayed.
MP3
MP3
MP3
MP3
MP3
MP3
MP3
Demo
amour
Mode Selector
Insert a SD Card
Automatic
Be natural_s_e
Can you celebr
clon_bing bing
1
Repeatedly briefly press SOURCE button
to select the different modes available.
Briefly press REL after turning the unit on,
then insert a common SD card into SD slot
when the TFT slanted.
Note:
If you have loaded a disc, USB and SD Card,
press source to toggle thru and choose which
media source you would like to choose.
*
Briefly Pressing SRC on the main unit also
performs the same function.
Angle Setting
Scan the tracks
Note:
7
Press and hold
in the monitor, the press
REL till ANGLE appears
2
Infrared Sensor:
CARD
SEL
CARD appears in the SD mode and USB
appears in the USB mode.
*
Press SRC on the main unit to switch to DISC
mode. With SD and USB inserted, press this key
repeatedly to switch between USB, SD and disc.
+ to adjust
monitor backward by definite angle, press
4
Receptor
on the main unit for the wireless
Sound characteristics
3
- to adjust it forward.
remote control.
MODE
*
*
*
Press
to turn to mode switch.
Decrease volume level, adjust some items
Bit rate not more than 320kbps.
Supports ID3V1.
Notes:
Increase volume level, adjust some items
* When adjusting the monitor angle, use this
method! Otherwise the unit will be damaged.
Play/pause
Stop
* This function is operated by the main unit only.
Previous track
Next track
DISC setup menu
MODE
Mode selector
16
33
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
DISC/VCD/MP4
Main Menu
---Preferencespage--
Main Menu Setup
1.Video Adjustment
After selecting VIDEO, the sub menu will
appear as follows:
Default
Exampleshowinghowtosetloadfactorysetting:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
FM
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
EXIT
Reset
Press and hold SETUP on the remote control
or MENU on the main unit, or press SET in
the monitor to enter the menu as follows:
In this menu you can adjust CONTRAST,
COLOR, TINT, BRIGHT, PICTURE.
GoToPreferencePage
LoadFactorySetting
Picture Adjustment
Press PICTURE in this menu, it will appear
as follows:
VIDEO
AUDIO
SOURCE
SYSTEM
EXIT
This menu includes VIDEO, AUDIO,
SOURCE, SYSTEM, EXIT. Press them in
the monitor to set the desired status.
SHARP
EXIT
Note:
* Press and hold SETUP or press MENU on
the main unit to set up this menu; press them
in the monitor to select the option.
Press
and
to adjust the size, then
press SAVE to save the setup, press EXIT
to exit this menu.
Note:
* Adjusting the other options perform the same
operation.
32
17
Download from Www.Somanuals.com. All Manuals Search And Download.
05
04
Main Menu
DISC/VCD/MP4
2.Audio Adjustment
3.Source Adjustment
---Preferencespage--
After selecting AUDIO, the sub menu will
appear as follows:
In the main menu, press SOURCE in the
monitor, the sub menu will appear as follows:
DiscMenu
ExampleshowinghowtosetDiscMenuLanguage:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
VOLUME
SUBWOOF
FAD
--PreferencePage--
BALANCE
TVType
Audio
Auto
Eng
Eng
Eng
English
AUX ON
IPOD ON
SD ON
USB ON
TVType
Audio
Auto
Eng
TREBLE
BASS
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
EXIT
You can adjustVOLUME, SUBWOOF,
BALANCE, FAD, BASS, TREBLE, For
example, press FAD, the setting menu
will appear as follow:
GoToPreferencePage
You can switch all of the items to ON or
OFF, press the corresponding button to set.
PreferredMenuLanguage
If one of them was set OFF, that function
is null.
Parental
Exampleshowinghowtosetparentalcontrol:
(Press
Note:
,
or ,thenpressENTER)
--PreferencePage--
(Press
*
If the font display is in red, this model does
not contain this function.
--PreferencePage--
SUBWOOF
2
3
4
5
6
7
8
Off
G
PG
PG 13
PGR
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
4.System Adjustment
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
After selecting SYSTEM, the sub menu
will appear as follows:
R
NC 17
Adult
FADE F4
EXIT
GoToPreferencePage
SetParentalControl
CLOCK SYS
Press
level, press EXIT to exit this menu.
and
to adjust the desired FAD
KEY BEEP
MONI FLEX
Password
Exampleshowinghowtosetpassword,and thedefaultpasswordis8888.
Note:
* Adjusting the other options perform the same
operation.
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
EXIT
EXIT
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
In this menu you can adjust CLOCK SYS,
KEY BEEP and so on.
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
Note:
* If the item display in sky-blue, then it can not be
set up.
Change
GoToPreferencePage
ChangePassword
18
31
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
DISC/VCD/MP4
Main Menu
Clock System
Reverse Pola
Subtitle
(Press
Exampleshowinghowtosetsubtitlelanguage:
(Press
,
or ,thenpressENTER)
--PreferencePage--
CLOCK SYS
--PreferencePage--
KEY BEEP
LAMPSEL
TVType
Audio
Subtitle
DiscMenu
Parental
Password
Default
Auto
Eng
Eng
Eng
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
MONI FLEX
TVType
Audio
Auto
Eng
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
EXIT
EXIT
Press CLOCK SYSTEM in the monitor to
set 12 HOUR or 24 HOUR in this menu.
Setting REVERSE POLA in this menu.
If the signal is +12V , please press
BATTERY in the monitor. If the signal is
0V, please press GROUND.
GoToPreferencePage
PreferredsubtitleLanguage
Key Beep
Lamp SEL
CLOCK SYS
KEY BEEP
MONI FLEX
LAMPSEL
EXIT
In this menu you can adjust KEY BEEP,
press it in the monitor and select ON or OFF,
the default setting is ON, it means when you
press the keys, they sounded.
EXIT
In this menu you can adjust LAMP SEL,
press it in the monitor and select ON or OFF,
the default setting is ON.
MONI FLEX
AMS Fullup
CLOCK SYS
KEY BEEP
MANUAL
AUTO
MONI FLEX
LAMPSEL
EXIT
EXIT
In this menu you can adjust MONI FLEX,
The display screen is flexed automatically
when set AUTO, automatics closes when
set MANUAL.
In this menu you can adjust AMS FULLUP.
If the setup is ON, when the presettable
stations are full, no new station is allowed to
store.When you select OFF, it will search
continually.
30
19
Download from Www.Somanuals.com. All Manuals Search And Download.
05
04
Main Menu
DISC/VCD/MP4
---Preferencepage---
RT Scroll
Local Area
TVType
ExampleshowinghowtosetTVtype:
(Press
LOCAL AREA
LOCAL
EUROPE
U.S.A
SLOW
,
or ,thenpressENTER)
--PreferencePage--
(Press
NORMAL
FAST
GOTO FREQ
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
PAL
Auto
NTSC
EXIT
EXIT
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
You can select EUROPE or USAor ORIENT
to search the stations quickly by your
current area.
To select your desired speed, SLOW,
NORMAL, FAST. The default settingis
NORMAL.
GoToPreferencePage
SetTVStandard
Local
TA Volume
Audio
ExampleshowinghowtosetAudiolanguage:
(Press
LOCAL AREA
LOCAL
LOW
,
or ,thenpressENTER)
--PreferencePage--
(Press
NORMAL
HIGH
--PreferencePage--
GOTO FREQ
TVType
Audio
Auto
Eng
Eng
Eng
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
TVType
Audio
Auto
Eng
EXIT
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
EXIT
In this menu, you may choose to search Local
Stations. When ON is selected, only strong
signaled local stations may be received. When
this is OFF, weak signal out-of-town stations
may be received.
To select your desired volume, LOW,
NORMAL, HIGH. The default setting is
NORMAL.
GoToPreferencePage
PreferredAudioLanguage
Regional Switch
Goto FREQ
REG OFF
REG ON
LOCAL AREA
LOCAL
GOTO FREQ
EXIT
To set theAF searching region, the default
setting is ON.
EXIT
To select ON, you can use the GOTO button
on the remote control to select a station's
frequency directly by using the numbers.
20
29
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
DISC/VCD/MP4
Main Menu
--GeneralSetupPage--
Adjust Screen
CLOCK SYS
KEY BEEP
Captions
Exampleshowinghowtosetcaptionson/off:
(Press
MONI FLEX
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
--GeneralSetupPage--
EXIT
TVDisplay
TVDisplay
AngleMark
Wide
On
Eng
Wide
On
Eng
SAVE
AngleMark
OSDLang
Captions
(Picture 1)
OSDLang
Captions
Off
On
Off
On
On
Off
ScreenSaver
ScreenSaver
Press ADJ SCREEN to display the above
menu. Press the square button at the top left
GoToGeneralSetupPage
ClosedCaptions
,then the button will move to place
press it at place , it will move to place
then place , press SAVE.
,
RT SCROLL
TA VOLUME
REGION
,
ScreenSaver
ExampleshowinghowtosetScreenSaveron/off:
Clock Adjustment
EXIT
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
(Picture 2)
--GeneralSetupPage--
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
CLOCK
Press in picture 1 or press in picture 2
to enter the following menu:
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
00:00:00
ScreenSaver
ScreenSaver
On
Off
GoToGeneralSetupPage
ScreenSaver
EXIT
CLOCK
Press CLOCK ADJ in the monitor to
adjust the clock.
EXIT
28
21
Download from Www.Somanuals.com. All Manuals Search And Download.
05
05
DISC/VCD/MP4
DISC/VCD/MP4
--GeneralSetupPage--
Number Buttons
DISC/VCD/MP4 Setup
23
Press one of Number Buttons(0~9)
to select a track, it will be played auto-
matically.
During DISC/VCD/MP4 playback, touch
the screen. The bottom will display the
following menu:
TVDisplay
ExampleshowinghowtosetTVDisplaymode:
Note:
Press this region and the screen shows the
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
*
(Press
following menu: number keys appears, touch
the number to select tracks.
Touch the " X " to exit this menu.
Play/pause
Stop
--GeneralSetupPage--
TVDisplay
Wide
AngleMark
On
TVDisplay
AngleMark
Normal/PS
Normal/LB
Wide
On
Decrease volume level
Increase volume level
DISC setup menu
Track region
Eng
Off
On
Eng
Off
On
OSDLang
Captions
OSDLang
Captions
Wide
ScreenSaver
ScreenSaver
Mode selector
GoToGeneralSetupPage
SetTVDisplaymode
1
4
2
5
8
0
3
6
9
X
Note:
*
Press the right corner repeatedly to play the
next track( shows), press the left corner to
play the previous track( shows).
7
--
DISC/VCD/MP4 Operation
AngleMark
Exampleshowinghowtosetpicturemode:
(Press
22
*
Press
CLEAR to clear the input.
10
Insert a disc into the slot , the unit will
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
automatically switch on. If a disc is loaded,
press SOURCE on the remote control to start
the playback. If the unit is in other menu,
press DISC in the monitor to switch to disc
play.
Pause the Playback
--GeneralSetupPage--
During DISC/VCD/MP4 playback, press
17
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
to switch between play and pause;
During stop mode, press this button to
resume playback mode.
On
Off
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
Note:
ScreenSaver
ScreenSaver
Press SRC on the main unit to switch to DISC
mode. If an SD card and USB is plugged into
the unit, press this key over again to toggle
between USB, SD and disc.
*
*
Note:
GoToGeneralSetupPage
SetAngleMark
*
Pressing
same function.
in the monitor also performs the
Pressing
function.
in the monitor performs the same
Stop the playback
During DISC/VCD playback, first press,
, then press or on the remote
Selecting Tracks
OSDLang
Exampleshowinghowtosetlanguagemode:
21
DuringDISC/MP4playback,press
21
control to replay. Press
twice to stop
toplayprevioustrack,press
nexttrack.
DuringVCDplayback,press
toplay
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
playing completely, then press to return
to the beginning of the current track.
During MP4 playback, press first, then
press to return to the beginning of the
current track.
(Press
--GeneralSetupPage--
21
English
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
toreturntothebeginningofthecurrent
21
French
track,press
toplayprevioustrack,press
againwithin3seconds
21
German
Spanish
Italian
Eng
Off
On
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
toplay
Note:
Pressing
function.
ScreenSaver
ScreenSaver
nexttrack.
Note:
*
in the monitor performs the same
Dutch
GoToGeneralSetupPage
SetOSDLanguage
Portuguese
*
Pressing left/right twice continuously in the
monitor also performs the same function.
22
27
Download from Www.Somanuals.com. All Manuals Search And Download.
05
05
DISC/VCD/MP4
DISC/VCD/MP4
DISC SETUP MENU
Selecting MENU
Playing Tracks at Random
Note:
The function can be operated by selecting the
DISC MENU SETUP.
*
Press
in the monitor, main menu and sub-menu
SETUP on remote control or
16
During DISC/VCD/MP4 playback, press
1
Selecting Menu: During DISC status,
press MENU to return to the root
4
menu, all of the chapters will appear on
RDM button on the remote control to play
any track at random under the directory
which you select. Press it again to return to
normal playing.
7
2
will appear on the TFT. Press
][ ] on the remote control to select
your desired item, then press ENTER.
[
][
]
[
23
monitor. You can press 27 or button to
select your desired chapter.
Slow motion playback
During DISC mode, press
play. There are speeds as follow:
to slow
Press to the pervious one, press SETUP
or press [ ][ ][ ][ ] to move the cursor
on , then press ENTER to exit the
menu setup.
Note:
2 Selecting Title: During DISC status,
3
press TITLE to return the title menu,
*
This function is operated by using the remote
control.
all of the titles will appear on monitor.
You also can press 27 or 23 button to
select your desired chapter.
Notes:
Repeat Playing
*
The selections are the preferred options that
During VCD mode, press
play. There are speeds as follow:
to slow
15
will be chosen if they are available on a disc.
If the disc that is inserted does not have the
preferred option then the discs own prefer-
ence will be used.
During DISC playback, press
RPT on
Note:
the remote control to perform replaying
function as followings:
Under DISC menu, touch the screen to select
items.
*
*
Title
Chapter
If the touch menu options are invalid or the
*
*
*
Regarding SETUP MENU, please refer to
the following pages for more details.
Off
disc does not support touch-TITLE,
27
that is
Note:
Some functions vary depending on the types
of models or formats of the disc.
Touch the screen to select menu, touch it
again to select the item.
the same as bottons on the remote control
During VCD/MP4 playback , press RPT
on the remote control to TRACK REPEAT.
The function is only valid on remote control.
*
will display on the screen. Press
to left,
press to right, press to up, press to
Note:
down and press to ENTER.
Increase the size of picture
*
This function is only valid on remote control.
9
During DISC/VCD/MP4 mode, Press
Skip backward/forward/F.F
/F.REW the playback
ZOOM to increase the picture in size. There
are sizes as follow, Each pressing increases
the size until the maximum size is reached.
20
Press
(
or ) on remote control to
perform fast rewind or fast forward.
Each pressing will change as follow:
2X
3X
4X
No Change
2X
4X
8 X
16X
Note:
The function is only valid on remote control.
*
*
Note:
To remove the image by pressing
button.
27
*
This function is only valid on remote control.
System Switch
On Screen Display
During DISC/VCD mode, Press
remote control to set the TV standard to PAL
or NTSC or AUTO system.
P/N on
8
During DISC status, press
the display shows:
OSD button
Title elapsed
Display off
Title remaining
AUTO
NTSC
Chapter
remaining
Chapter
elapsed
PAL
26
23
Download from Www.Somanuals.com. All Manuals Search And Download.
05
05
DISC/VCD/MP4
DISC/VCD/MP4
Program Playing
During VCD status, press OSD button the
display shows:
Changing the viewing angle
(Multi-angle)
Changing audio language
(Multi-audio)
During VCD mode, press 13 PROG, the
TFT displays the program menu. Press
NUMBER BUTTONS to select the track
Number and then press
to START, press ENTER to start program
With DISCs featuring multi-angle (scenes
shot from multiple angles) recordings, you
can press 7 ANGLE to switch among vie-
wing angles during playback.
Single elapsed
Display off
Single remain
DISCs can provide audio playback with
different language. With DISCs featuring
6
multi-audio recordings, you can press
AUDIO to switch between language and
audio systems during playback.
Total
elapsed
Total
remain
27
to move the cursor
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
During MP4 status, press OSD button the
display shows:
Selection options switch as follows:
the cursor to
previous page; move the cursor to
and press ENTER to the
and
ANGLE 1
ANGLE 2
ANGLE 3......
Selection options switch as follows:
Single
Single
elapsed
remain
Notes:
AUDIO 1
AUDIO 2
AUDIO 3......
press ENTER to the next page.
During this process, press
the program playing.
Display off
to cancel
18
*
This function is operated by using the remote
control.
Note:
Note:
*
*
This function is operated by using the remote
control.
This function only operates with DISCs fea-
*
This function is operated by using the remote
control.
*
*
This function only operates with DISCs featu-
ring multi-angle recordings.
Note:
This function is only valid on the remote control.
*
*
The
ates it features multi-angle scenes.
The number in the mark indicates the
mark on a DISC's package indic-
3
turing multi-audio recordings.
22
Press
CLEAR to clear the input.
2
*
The number in the
mark on a DISC's
Setting the Playback Time
3
package indicates the number of recorded
languages/audio systems.
number of angles from which scenes were shot.
It is invalid to press ANGLE during fast
forward/fast reverse or pause.
2
During DISC mode, press GOTO button
*
to set the playing time, when the TFT dis-
play : Title/Chapter/Audio/Subtitle/Angle
/TT time/CH time/Repeat/Time Disp.
Playing PBC (Menu)
3
During VCD status, press
TITLE, PCB.
Changing the subtitle language
(Multi-subtitle)
Playback starts and the menu of entire
disc appears on the monitor. Then you
can select your favorite track by using 23
Number Buttons. When a track is playing,
Press
ENTER to set the status. Then press NU-
7
2
[
][ ] to select the options, press
Selecting Audio Output
6
To change audio output, press
button to select the following channel:
AUDIO
MBER BUTTONS or
the current status.
7
2
[
][ ] to set
With DISCs featuring multi-subtitle recor-
dings. You can press SUB-T to switch
5
4
you can press
MENU to return to the
2
between subtitle languages during playback.
Selection options switch as follows:
During VCD mode, press
GOTO button
to set the playing time, when the TFT dis-
Stereo
Mono Right
Mono Left
menu if you would like to end the track and
select others. To cancel PBC playing, press
play : track/disc time/track time/repeat
3
TITLE button again.
......
Subtitles 1
Subtitles 2
Subtitles OFF
/time disp. Press
options, press ENTER to set the status.
23
[
][ ] to select the
Selecting the corresponding output to set
the different sound characters.
Note:
This function is operated by using the remote
control.
Note:
Then press
NUMBER BUTTONS or
*
*
*
This function is operated by using the remote
control.
[
][ ] to set the current status.
Note:
2
PBC playing confirms to version 2.0 of VCD
During MP4 playback, first press
GOTO,
This function is operated by using the remote
control only.
*
*
*
This function only operates with DISCs fea-
turing multi-subtitle recordings.
disc and SVVD disc only.
and monitor shows : ---, press your desired
track by using number buttons and press EN-
TER to set the status. Second press GOTO
button, and the monitor shows: -:--:--, input
your desired time, then press ENTER.
2
The number in the
mark on a DISC's
package indicates the number of recorded
subtitle languages.
Note:
*
*
This function is operated by using the remote
control.
22
Press
CLEAR to clear the mistake input.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|
BenQ Projector MX520 User Manual
BenQ Projector W20000 User Manual
Black Box Server EME1DC16 User Manual
Black Decker Cordless Drill 611306 00 User Manual
Black Decker Cordless Drill 90524801 User Manual
Black Decker Fryer SKG110C User Manual
Bradley Smoker Plumbing Product SS 3 AST JUV User Manual
Braun Blender MR 6550 V User Manual
BRK electronic Smoke Alarm 4010YR User Manual
Casio Projector MA1003 B User Manual