HIR70BL
HIR70GR
HIR70TA
7"(178mm)
UNIVERSAL HEADREST WITH
PRE-INSTALLED WIDESCREEN
TFT VIDEO MONITOR
WITH BUILT-IN DUAL
CHANNEL INFRARED AUTO
TRANSMITTER
HIR70BL
HIR70GR
HIR70TA
7"(178mm) UNIVERSAL HEADREST
WITH PRE-INSTALLED WIDESCREEN
TFT VIDEO MONITOR WITH BUILT-IN DUAL
CHANNEL INFRARED AUTO TRANSMITTER
09.2011
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
PRECAUTIONS
Please read and observe all warning and instructions in this owner’s manual
and those marked on the unit. Retain this booklet for future reference.
DC 12V
There are two kinds of alarm symbols as follows:
Power Requirements
Power Consumption
Screen Size
6W
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to presence of
7 inch LED Backlit TFT LCD
16:9 Wide
“dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
Screen Format
WARNING
people.
800xRGBx480
Resolution Pixel
Two video & one audio inputs
(W)13.5x(D)10.59x(H)5.5inch
DC 12V
A/V Inputs
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
Dimensions
accompanying the product.
CAUTION
IR Power Requirements
IR Power Consumption
IR Transmitter Frequency A
IR Transmitter Frequency B
LCD Panel Type
3W
A: Right 2.8MHz Left 2.3MHz
B: Right 3.8MHz Left 3.2Mhz
Active Matrix TFT
NTSC/PAL auto select
WARNING
Compatible video standard
Do not try and service these
Use extra caution with any liquids
in your car. If you or your child
spills any liquid on these products,
pull your vehicle to the roadside
and turn the key off to disconnect
products yourself. Seek only
a qualified service center or
factory service center.
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his
own expense.
or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you have had the monitor
inspected at a service center by a qualified
technician, Severe harm or danger can occur.
Be careful not to drop or apply
pressure to the front panel of
your video monitor. If the screen
cracks due to misuse, your
warranty will be void!
Use only a damp cloth to clean
the screen and use only purified
water on the cloth. Wring out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!
Be careful not to overload your
cigarette lighter plug by adding
more than one device at a time.
9
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
A/V AND POWER CONNECTIONS
On a towel or soft cloth, gently place the monitor assembly “face down” on a stable
work surface.
CAUTION
Using the wires provided, complete the audio, video and power connections in
your vehicle as shown in the diagram below.
Watching the monitor for an
extended period of time
with the engine turned off
may deplete the vehicle’s
battery.
Quality installations are best
performed by qualified and
certified installers.
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
Do not cover heater ducts or vents.
This may cause a fire or an electric
shock.
Check Point
1.The operating temperature of this product is limited to 14°F~140°F
(-10℃~60℃）
2.When your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle and for operating temperatures
to return to normal operating ranges. Your monitor will return to its normal
functions when operating ranges are achieved.
(Yellow) Video 1 input
(Yellow) Video 2 input
(Red) Audio right input
(White) Audio left input
(Black) chassis ground
3.Optimum picture quality is achieved when you are directly in front of the monitor
(+/-45 degrees).
(Red) +12V DC battery
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES AND CONTROLS
OSD
BRIGHT
ROTATE
ZOOM
LANGUAGE
RESET
IR
CONTRAST
COLOR
TINT
9
1.Power switch
1
SOURCE
2.V1 switch
3.V2 switch
8
7
6
2
5
4
3
4.Decrease
5.Menu
6.Increase
7.Mode switch
8.Sys switch
9.Remote sensor
POWER
Press to turn unit ON or OFF.
1
2
A/V SELECT
Use this button to switch between
Video source1 and Video source 2.
ZOOM
1
3
2
MENU
3
This button enables the on-screen
display menu system. Once enabled,
this button is used as an ENTER button.
4
5
ROTATE Adjustment
4
5
UP/DOWN BUTTONS
This buttons are used to increase
or decrease parameters in the on-
screen display menu system.
MODE SELECT
This button switch display
ratio between 4:3 and 16:9.
7
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
INSTALLATION
1
2
1.Tubes could be adjusted from left and right.
2.Tubes could be adjusted from front and back.
50
50
50
50
ROTATE
ZOOM
B
105mm
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|