D623 Series/D625 Series
User's Guide
EN Keypads
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Contents
.
Contents
About this User Guide...................................................5 View Alarm Memory (Cmd 40) ................................ 21
Introduction.......................................................................5 View System Trouble (Cmd 42)................................ 21
Security System Basics...................................................6 View Point Trouble (Cmd 48) ................................... 22
What is a Point? ................................................................6
What is a Faulted Point? ..................................................6
Are All Points the Same? .................................................6
Controlled Points ..............................................................6
24-Hour Points ..................................................................6
All On ..............................................................................6
Part On ..............................................................................6
Keypad Keys....................................................................7
Keypad Tones..................................................................7
Keypad LED Descriptions............................................8
Commands.........................................................................8
System Events....................................................................8
Fire Alarms ........................................................................8
Burglary Alarms................................................................8
Fire Trouble Events ..........................................................8
Non-Fire Trouble Events .................................................8
How Your System Reports Alarms.............................8
Check System Status ......................................................9
Log Out of the System ...................................................9
Silence Alarms ................................................................9
Keypad Adjust (Cmd 49).............................................10
Turn the System Off.....................................................10
Turn the System All On (All On or Cmd 1) ...........10
Turn the System Part On (Part On or Cmd 2) .......11
Turn the System Part 2 On (Cmd 3) .........................12
Set Part 2 Points (Cmd 65) ..........................................12
Turn the System On with No Delay.........................12
System Test (Cmd 41).................................................. 22
Walk Test (Cmd 44) ..................................................... 23
Reset the System (Cmd 47)......................................... 23
Turn Watch On/Off (Cmd 61)................................... 23
Select Watch Tone (Cmd 62)..................................... 24
Select Watch Points (Cmd 63) ................................... 24
Extend Auto On Time (Cmd 51)............................... 24
Change Skeds (Cmd 52).............................................. 25
Sked All Days Feature ................................................... 25
All On Skeds................................................................... 25
Part On Skeds................................................................. 25
Part 2 On Skeds.............................................................. 26
Off Skeds ......................................................................... 27
Output On Skeds............................................................ 27
Output Off Skeds............................................................ 27
Change Outputs (Cmd 54).......................................... 28
Remote Program (Cmd 43) ........................................ 28
All Areas Off (Cmd 81) ............................................... 28
All Areas On (Cmd 80) ............................................... 28
Move to Area (Cmd 50) .............................................. 29
Auto-Forward On Setup (Cmd 83)........................... 29
Auto-Forward Off Setup (Cmd 84)........................... 30
Auto-Forward On/Off (Cmd 82)............................... 30
Remote Arming with Telephone, Area 1............... 31
View Log (Cmd 85)...................................................... 31
Basic Pager Reports..................................................... 32
Control Panel Event Descriptions............................ 33
Security System Limitations ...................................... 38
Fire Safety and Evacuation........................................ 38
Maintenance and Service........................................... 40
Power Failure................................................................ 40
How to clean the keypad............................................ 40
Glossary.......................................................................... 41
Index ............................................................................ 42
Turn the System On with No Exit Tone (Delay
Silent) ............................................................................13
Turn the System On with Points Faulted (Force
Arm) ............................................................................14
View Faulted Points .....................................................15
Bypass Points .................................................................15
Date and Time (Cmd 45).............................................16
Change Passcode (Cmd 55) ........................................16
Change Others’ Passcodes (Cmd 56)........................17
Change Others’ Passcode Authority Levels (Cmd
56)
............................................................................17
Add a Passcode (Cmd 56)............................................18
Delete Passcodes (Cmd 58).........................................19
Renew One-time Passcodes (Cmd 53)......................20
Check System Troubles (Cmd 4)...............................20
Bosch Security Systems | 9/04 | 46841E
3
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Contents
Figures
Figure 1:
Figure 2:
Figure 3:
Figure 4:
Figure 5:
Figure 6:
Figure 7:
Figure 8:
Information Box ..........................................2
D623 Series and D625 Series Features .....5
Controlled Points are All On.....................6
Controlled Points are Part On...................6
Date and Time format ..............................16
Display layout............................................31
Pager Display format ................................32
Smoke Detector locations.........................39
Tables
Table 1:
Table 2:
Table 3:
Table 4:
Table 5:
Table 6:
Table 7:
Table 8:
Keypad Keys................................................7
Keypad Tones..............................................7
Keypad LED Descriptions .........................8
System Status Messages..............................9
Silencing Exit Tone...................................14
Watch Tone Selection...............................24
Character Code Information....................32
Control Panel Event Descriptions...........33
4
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | About this User Guide
.
About this User Guide
This User’s Guide shows you how to use and maintain
your security system. It covers basic functions, such as
turning the system on and off.
Control of your security system is achieved through the
keypad, which offers a variety of basic and advanced
features. Its function, versatility, and ease of operation
make it ideal for home or office use. The keypad is
tailored to meet your individual needs. Moreover, it
has been designed with you, the user, in mind.
The functions described in this guide are programmed
by your security company. Some of them may not be
enabled in your system. Certain functions covered may
require you to enter your personal passcode.
Introduction
Your system helps to secure life, property, and
investments against fire, theft, and bodily harm. It
consists of one or more keypads, motion sensors (such
as detectors or devices located on doors and windows),
and sensing devices designed to detect the presence of
smoke or combustion. Each device is connected to a
sophisticated control panel with a microprocessor that
processes all events registered by the system.
Figure 2: D623 Series and D625 Series Features
1
2
1
2
Status
On
Check
Change
Area
Watch
3
Test System Weekly
A
B
C
D623/D623W/D625/D625W
D623B/D625B
3
1 - Text display
2- System status indicators
3 - Sounder
Bosch Security Systems | 9/04 | 46841E
5
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Security System Basics
Security System Basics
What is a Point?
All On
A Point is a detection device or group of devices
connected to your security system. Points are identified
by the area they monitor, such as a front door,
bedroom window, or hallway.
When you turn your system All On you are turning on
all controlled points, both interior (motion detectors)
and perimeter (doors and windows of the building).
Figure 3: Controlled Points are All On
What is a Faulted Point?
When a point (such as a door or window) is closed, it is
said to be normal. When the door or window is open,
the point is said to be faulted, or not normal. When
you turn your system on, you usually want all of the
points in your system to be normal. However, you can
turn your system on with faulted points by using the
Bypass Points command.
2
3
1
3
3
4
You can see if there are any faulted points by pressing
the [*] key when the system is off.
Are All Points the Same?
Not all points are the same. In fact, there are two basic
types of points: Controlled and 24-hour.
1 - Dining room
2 - Kitchen
3 - Bedroom
4 - Living room
Controlled Points
Controlled points respond to alarm conditions
Part On
depending upon whether the system is turned on or off.
They are programmed to either respond instantly to
alarm conditions, or to provide a delay for you to reach
the keypad and turn the system off. Various controlled
points may be located throughout your house.
When you turn your system Part On you are turning
on only a portion of the controlled points. The
particular points included in this portion are
determined by your alarm company. Part points may
include only the perimeter (doors and windows) of
your system, or the points on the first floor of a two-
story house. Check with your security company to
learn which points are Part points.
When you turn your system on, you have the option of
turning on all controlled points (All On) or just some of
the controlled points (Part On). See All On and Part
On for more information.
24-Hour Points
Figure 4: Controlled Points are Part On
24-hour points are always on, even when the system is
turned off. There are two types of 24-hour points: Fire
and Non-Fire. See Reset the System on page 30 for
more information.
2
3
1
3
•
Fire Points: Only monitor fire detection devices
such as smoke detectors. They are always on and
cannot be turned off.
3
4
•
Non-Fire Points: Always on and cannot be turned
off.
1 - Dining room
2 - Kitchen
3 - Bedroom
4 - Living room
6
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Keypad Keys
.
Keypad Keys
Your Text keypad has nineteen keys for performing
the various functions described below:
Keypad Tones
The keypad emits several distinct tones and illuminates
lights to alert you to system events.
Table 1: Keypad Keys
Table 2: Keypad Tones
Key
Function
Tone
Description
[1], [2], [3],
[4], [5], [6],
[7], [8], [9],
[0]
Numeric keys used to enter passcodes
and issue commands.
Fire Alarm
When fire point activates, the keypad emits
a repeated warble tone (on for 2 sec., then
briefly off).
When a burglary point activates while your
system is turned on, the keypad emits a
continuous warble tone. The sounder
remains on for the duration of the time set
by your security company.
When a system component is not
functioning properly, your keypad emits a
repeated warble tone (on briefly, followed
by a pause, followed by the warble tone).
Press [4] to view the trouble. If problem is
point-related, the keypad display indicates
the faulted point.
Pressing any key on the keypad sounds a
short pip to indicate the pressed key is
accepted.
When you enter the premises through a
point programmed for Entry Delay, the
keypad emits an intermittent beep to
remind you to turn your system off. If the
system is not turned off before the Entry
Delay expires, an alarm condition occurs
and a report may be sent to your alarm
company.
After you turn your system on, the keypad
emits an intermittent beep and counts
down the Exit Delay time. If you do not exit
before the Exit Delay time expires and an
Exit Delay point is faulted, an alarm event
begins.
Burglary Alarm
Trouble
[CMD]
Used in conjunction with numeric keys to
enter commands. Also displays system
status.
Turns your system All On (refer to Turn
the System All On (All On or Cmd 1) on
page 10).
Turns your system Part On (refer to Turn
the System Part On (Part On or Cmd 2)
on page 11).
Turns your system All On or Part On
without entry or exit delay (refer to Turn
the System On with No Delay on
page 12).
[ALL ON]
[PART ON]
[NO DELAY]
Key Press
[BYPASS]
[*]
Bypasses one or more points (refer to
Bypass Points on page 15).
Entry Delay
When available, advances to the next
display.
Emergency functions (Fire, Panic, or
Emergency Alarms) may be assigned to
these keys by your security company.
To activate the special function, press the
key twice (consecutively) within 2 sec.
Your security company labels each key
with its assigned function.
[A], [B], [C]
Exit Delay
Error
If you press an incorrect key, your keypad
emits an error tone to indicate an invalid
entry. The Error Tone is the same warble
tone as the Trouble Tone, but is not
repeated.
OK
Indicates a keypad entry is accepted, such
as a correctly entered passcode. The
Keypad emits a single, high-pitched beep
for 1 sec.
Watch
If any watched point is faulted, the keypad
emits a tone to alert. The tone varies in
duration, depending on the selected
Watched Tone (refer to Select Watch
Tone (Cmd 62) on page 24).
Bosch Security Systems | 9/04 | 46841E
7
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Keypad Tones
Fire Trouble Events
When a fire trouble (such as a loose wire) occurs, your
keypad emits a Trouble tone.
Keypad LED Descriptions
The keypad LEDs are described below.
The keypad displays the System Trouble message.
Refer to Check System Troubles (Cmd 4) on page 20 for
more information on determining the nature of the
trouble.
Table 3: Keypad LED Descriptions
LED
State
Description
Status
On
No system troubles present.
Non-Fire Trouble Events
When a trouble event such as a power failure occurs,
your keypad emits a trouble tone.
Slow Flash
AC failure, system trouble, or
keypad was moved away from
its assigned area.
Fast Flash
Command center in Command
Mode.
Panel is disarmed.
The keypad displays the System Trouble message.
Refer to Check System Troubles (Cmd 4) on page 20 for
more information on determining the nature of the
trouble.
On
Off
Slow Flash
On
Panel is armed with No Delay.
Exit Delay timer is active or
control panel is armed with
Entry/Exit Delay.
How Your System Reports
Alarms
Commands
Commands allow you to carry out various tasks such as
add/delete passcodes, set the date/time, or test the
system. Each command is detailed in this user guide.
Your security system may be programmed to
automatically disconnect your telephone when sending
reports to your security company. Once the report is
complete, the system returns the telephone to normal
operation (check with your security company).
Commands are written as: [CMD] [6] [3]. To enter this
command, first press the [CMD] key, followed by the
[6] key, and then the [3] key.
Your system makes repeated attempts to send reports
to your security company. If your system fails to report,
the keypad signals a system trouble. Refer to Check
System Troubles (Cmd 4) on page 20 to determine the
nature of the trouble.
System Events
Your system responds to four types of alarm events. If
more than one event occurs, your system sorts them
into one of four groups: Fire Alarms (highest priority),
Burglary Alarms, Fire Troubles, and Non-Fire Troubles
(lowest priority). Events grouped as highest priority are
always sent to the central station first.
If your telephone service is interrupted,
your security system cannot send reports
to your security company unless it has an
alternate means of transmitting them.
Fire Alarms
Fire alarms are the highest priority events. When a fire
point activates, your keypad emits a Fire Alarm tone.
The tone sounds for the length of time programmed by
your installation company. Evacuate all occupants and
investigate for smoke or fire. Ensure all occupants
know the difference between the Burglary Alarm tone
and the Fire Alarm tone.
Burglary Alarms
Burglary alarms are the second priority. When a
burglary point activates, your keypad emits a Burglary
Alarm tone. The tone sounds for the alarm set by your
security company. Ensure all occupants know the
difference between the Burglary Alarm tone and the
Fire Alarm tone.
The keypad scrolls through each point alarm, or you
can press the [*] key to manually advance the list.
8
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Check System Status
.
3. Press and hold [CMD] to remove the alarm
messages from the keypad display. Refer to
Section View Alarm Memory (Cmd 40) on page 21 to
see which points caused the alarm.
Check System Status
When the system is Off, press [CMD] to show the
current system status. The following message may
appear:
Table 4: System Status Messages
System Status
Message
Description
System OK
Indicates there are no system
troubles.
System Trouble!
Press [4] to view
Indicates there is a system trouble.
Refer to Check System Troubles
(Cmd 4) on page 20 to determine
the nature of the trouble.
Points faulted
Press [0] to view
Indicates the system has faulted
points. Refer to View Faulted
Points on page 15 for more
information.
Log Out of the System
The system remembers passcodes entered for
approximately 10 sec. after you stop pressing keys. To
log out of the system, press the [CMD] key twice.
Logged Out appears on the keypad display.
Silence Alarms
When an alarm occurs, the alarm tone sounds and the
display shows the point(s) in alarm. If you enter your
passcode before the system dials your security
company, the alarm report is aborted.
1. The keypad displays the point(s) in alarm.
Alarm Pt4
Living Room
Enter code to
silence alarm
2. Enter your passcode to silence the alarm and turn
the system off (if it was turned on). An alarm
report is sent to your security company if the
alarm is not acknowledged in time.
The display continues to show the point (or
points) that caused the alarm.
Silenced alarms
listed below
Alarm Pt8
Motion Detector
To remove
silenced alarms
from display,
hold Cmd
Bosch Security Systems | 9/04 | 46841E
9
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Keypad Adjust (Cmd 49)
2. Enter your passcode to turn the system off. Once
Keypad Adjust (Cmd 49)
the system is off and there are no faulted points,
the keypad displays the idle text (second line) as
shown below:
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
Smiths Residence
OK for All On
Use Command 49 to adjust the keypad sounder
volume and the display brightness.
1. Press [CMD] [4] [9]. Enter a valid passcode if
prompted.
2. To adjust the keypad sounder volume, press and
hold the [*] key and then press [1] to increase the
volume or [4] to decrease the volume.
Turn the System All On (All On
or Cmd 1)
Exit Delay Time (to be filled in by your security
company).
3. To adjust the keypad display brightness, press and
hold the [*] key and then press [3] to increase the
brightness or [6] to decrease the brightness.
4. Press [CMD] to exit this command function when
all adjustments are made.
You have __________ sec. to exit premises before
system turns on.
Use this command to turn on the entire system. Once
you press the [ALL ON] key or enter Cmd 1, the Exit
Delay timer starts its countdown. The length of exit
delay is programmed by your security company.
Turn the System Off
Entry Delay Time (to be filled in by your security
company).
When your system is ready to turn All On, it displays
OK for All On, indicating all points are normal,
such as no open doors or windows and no one standing
in front of a motion detector.
You have __________ sec. to enter premises and turn
system off.
Smiths Residence
Ok for All On
Enter your passcode to turn the security system off.
When the system is on, you must enter through a
designated entry door to prevent an alarm. Opening a
designated door, such as the Front Door, starts the
entry delay. During entry delay time, the keypad emits
a double tone to remind you to turn the system off.
Enter your passcode before the entry delay time
expires to turn the system off.
If your keypad displays a message indicating the
system is not ready to arm (such as Not Ready to
Arm), check all doors and windows to see if any are
open or if someone or something is in front of a motion
detector. If all protected doors and windows are closed
and no motion detectors are blocked and the keypad
still displays Not Ready to Arm, contact your
security company for assistance.
If you enter through the wrong door or fail to turn the
system off before the entry delay time expires, you may
cause an alarm. If an alarm occurs, silence the alarm by
entering your passcode and call your security company
to let them know that there is no emergency situation.
1. When the system is on, the On indicator
illuminates. If the system is All On, the keypad
display shows:
In the example below, the exit delay is 60 sec. Leave
before the exit time expires. Leaving after exit delay
expires causes an alarm event.
1. Make sure all points are normal (not faulted). If
your system has a faulted point (door/window
open), you can either close it or bypass it (see
Bypass Points 1 on page 18).
2. Press [ALL ON] or [CMD] [1]. The keypad may
prompt you to enter a valid passcode.
Smiths Residence
All On
If the system is Part On, the keypad display
shows (Part 2 On shows if the system is Part 2
On):
Smiths Residence
Part On
10
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Turn the System Part On (Part On or Cmd 2)
.
3. Enter your passcode if necessary. Exit delay time
begins. The On indicator turns on. Exit the
building now.
Turn the System Part On (Part
On or Cmd 2)
60 seconds to
All On.
Exit Delay Time (to be filled in by your security
company).
Enter your passcode to stop the system from
turning on during the exit delay.
You have __________ sec. to exit premises before
system turns on.
Press [BYPASS] to bypass points (see Bypass
Points on page 18). You can turn the system All
On with No Delay by pressing [NO DELAY]. You
can also turn the system Part On by pressing
[PART ON]. The system prompts you through this
procedure.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
Part On turns on only part of your system, leaving the
rest of the system turned off.
If your keypad shows OK for Part On or OK for All
On, this means all of the points that turn on for Part
On operation are normal (such as all protected doors
and windows bing closed).
To bypass points
Press Bypass
For no delay
press No Delay
Smiths Residence
Ok for Part On
For Part On
press Part On
Once you press the [PART ON] key, exit delay begins.
Use Part On when you want part of your system turned
on. For example, use Part On if you plan to stay inside
the premises and you only want to protect the
perimeter doors, or you are leaving and you want a pet
to move freely about inside without causing an alarm.
4. During the last 10 sec. of Exit Delay, the keypad
displays Do not exit! and emits a double tone
every second to warn you not to exit and to turn
the system off. The system turns All On. The On
indicator remains on steady.
Smiths Residence
All On
1. Make sure that Part points are normal (not faulted).
If your system has faulted points, return them to
normal, or bypass them.
5. To turn the system off, enter your passcode.
2. Press [PART ON]. The keypad may prompt you to
enter a valid passcode.
3. Enter your passcode if necessary. The On indicator
turns on and Exit delay time begins. The keypad
display scrolls the following:
60 seconds to
Part On.
To bypass points
Press Bypass.
For no delay
Press No Delay.
For All On
press All On
48 seconds to
Part On.
Enter your passcode to stop the system from
turning on during the exit delay. You can turn the
system Part On with No Delay by pressing [NO
DELAY]. Or you can bypass points by pressing
[BYPASS].
Bosch Security Systems | 9/04 | 46841E
11
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Turn the System Part 2 On (Cmd 3)
4. During the last 10 sec. of Exit Delay, the keypad
displays Do not exit!and emits a double tone
every second to warn you not to exit and to turn
the system off. The system turns Part On. The On
indicator remains on steady.
4. During the last 10 sec. of Exit Delay, the keypad
displays Do not exit!and emits a double tone
every second to warn you not to exit and to turn
the system off. The system turns Part 2 On. The
On indicator remains on steady.
Smiths Residence
Part 2 On
Smiths Residence
Part On
5. Enter your passcode to turn the system off.
5. To turn the system off, enter your passcode.
Turn the System Part 2 On
(Cmd 3)
Set Part 2 Points (Cmd 65)
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
Exit Delay Time (to be filled in by your security
company).
Use this command to program which points are armed
each time you turn the system Part 2 On. This lets you
turn part of the system on to detect intrusion, while the
remaining part of the system lets you move freely
without sounding an alarm.
1. Make sure the system is turned off (On indicator is
off).
2. Press [CMD] [6] [5]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
display scrolls the following:
You have __________ sec. to exit premises before
system turns on.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
Part 2 On turns on the portion of your system
designated as Part 2, leaving the rest of the system
turned off. You can select the points that turn on for
Part 2 On, whereas Part On points are determined by
your security company (refer to Set Part 2 Points (Cmd
65) on page 12). Once you press [CMD] [3], the exit
delay timer countdown begins.
Pt2 Part 2 No
Front Door
Press 2* for
Pt2 Part 2 Yes
Smiths Residence
Ok for Part On
Pt3 Part 2 Yes
Hallway
In the following example, 60 sec, is used as the Exit
Delay. Exit Delay is set by your security company and
may vary from the example shown below.
Press 3* for
Pt3 Part 2 No
1. Make sure that points are normal (not faulted).
2. Press [CMD] [3] to turn the system Part 2 On. The
keypad may prompt you to enter a valid passcode.
3. Enter your passcode if necessary. The On indicator
turns on. The keypad display scrolls the following:
To exit
Press Cmd.
4. Enter the Point Number followed by the [*] key to
toggle between Yes or No for Part 2 On. Repeat
until all points are programmed Yes or No for Part
2 Mode (Yes = Active, ready to detect intrusion;
No = Non-Active, you can move freely without
sounding an alarm).
60 seconds to
Part 2 On.
To bypass points
Press Bypass.
5. Press [CMD] to exit this command.
For no delay
Press No Delay.
Turn the System On with No
Delay
For All On
press All On
This command turns the system All On or Part On
without entry or exit delays. Remember that turning
the system on with no delay allows no exit or entry
delay time through the designated delay point, like the
Front Door.
48 seconds to
Part 2 On.
Enter your passcode to stop the system from
turning on during the exit delay. You can turn the
system Part 2 On with No Delay by pressing [NO
DELAY], or you may bypass points by pressing
the [BYPASS] key.
1. Make sure all points are normal (not faulted).
12
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Turn the System On with No Exit Tone (Delay Silent)
.
2. Press [ALL ON] if you want to turn the system All
On, or press [PART ON] if you want to turn the
system Part On. Press [CMD] [3] if you want to
turn the system Part 2 On. The keypad may
prompt you to enter a valid passcode.
The keypad scrolls the following for Part On (the
display shows Part 2 On if the system is Part 2
On):
No exit time!
System arming.
3. Enter your passcode if necessary. The keypad
display shows the following for turning the system
All On:
Do not exit!
Enter code to
turn system off
60 seconds to
All On.
Smiths Residence
Part On
To bypass points
Press Bypass.
On with No Delay
For no delay
Press No Delay.
5. When the system is All On with No Delay, the
keypad displays the following:
Pressing [NO DELAY] begins a 10-sec. “last
chance” window in which you have 10 sec. to
decide if you want to allow the system to arm.
During this window, the display scrolls through the
following messages: No exit time! System
arming. Do not exit!If you decide not to
allow the system to arm, enter your user passcode.
Smiths Residence
All On
On with No Delay
If the system is Part On or Part 2 On with No
Delay, the keypad displays the following (the
display shows Part 2 On if the system is Part 2
On):
If all points are normal, the display shows the
following for Part On (the display shows Part 2 On
if the system is Part 2 On):
Smiths Residence
Part On
On with No Delay
60 seconds to
Part On.
The On indicator turns on and blinks, indicating
the system is on with no delay.
To bypass points
press Bypass.
For no delay
Press No Delay.
6. To turn the system off, enter your passcode.
4. To turn the system on (All On, Part On, or Part 2
On) with no delay, press [NO DELAY].
Turn the System On with No Exit
Tone (Delay Silent)
Use this command to turn the entire system All On,
Part On, or Part 2 On without any exit tones.
The keypad scrolls the following for All On:
No exit time!
System arming.
Remember that turning the system on with no exit tone
eliminates the tone emitted by the keypad intended to
alert occupants that the system is about to arm.
Do not exit!
Enter code to
turn system off
This command is useful when you wish to arm the
system, but not disturb the occupants while the system
counts down prior to arming.
Smiths Residence
All On
On with No Delay
1. Make sure all points are normal (not faulted).
2. Press and hold the appropriate key to silence the
exit tone. The keypad may prompt you to enter a
valid passcode.
Bosch Security Systems | 9/04 | 46841E
13
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide |
Table 5: Silencing Exit Tone
Turn the System On with Points
Faulted (Force Arm)
Arming With
To Silence Exit Tone
All On
Press and hold [ALL ON]
OR
Force-arming is not permitted for UL
applications.
Press [CMD], then press and hold [1].
Press and hold [PART ON]
OR
Press [CMD], then press and hold [2].
Press [CMD], then press and hold [3].
Part On
ꢀ
ꢀ
I can perform this command.
I cannot perform this command.
1. Press [ALL ON] or [PART ON] to turn the system
All On or Part On.
Part 2 On
2. The keypad displays the faulted points as follows:
Silencing the Exit Delay Tone doubles the
Exit Delay period.
Pt5 faulted,
Point Text
3. Enter your passcode if necessary. The keypad
display shows the following for turning the system
All On:
To Bypass Pt5
Press 5 + *
Then the system identifies the faulted point (in this
example Point 5), followed by instructions for
bypassing the point.
120 seconds to
All On.
To bypass points
press Bypass.
3. To force arm the system All On or Part On with
normal Exit Delay and exit tone, press [ALL ON]
or [PART ON] again. Enter your passcode when
prompted. The following scrolls across the display:
For no delay
Press No Delay.
If all points are normal, the display shows the
following for Part On or Part 2 On. If the system is
turned Part 2 On, the second line of the display
shows Part 2 On:
Forced on!
60 seconds to
All On.
1 points are
forced on.
120 seconds to
Part On.
To bypass points
press Bypass.
The display above uses an Exit Delay time
of 60 sec. and only one point is force-
armed. Exit Delay time and the number of
points forced on may vary.
For no delay
Press No Delay.
4. To turn the system on (All On, Part On, or Part 2
On) with no delay, press [NO DELAY]. See Turn
the System On with No Delay on page 14 for
more information.
4. To force arm the system All On or Part On with
Exit Delay doubled and no exit tone, press and
hold [ALL ON] or [PART ON] until the “point
faulted” message appears (see figure in Step 2).
Then press [ALL ON] or [PART ON] again. Enter
your passcode if prompted. The system then scrolls
the Forced on!message and the doubled Exit
Delay Time countdown. The exit tone is silenced.
The system ‘forces’ the faulted points on. As long
as they remain faulted they do not provide
protection. If the faulted points return to normal
before the system is turned off, they provide
protection and are capable of starting alarm events.
If a point becomes faulted after the exit delay
begins, the keypad displays the faulted point. If the
point remains faulted at the end of exit delay, it
starts an alarm event.
14
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | View Faulted Points
.
View Faulted Points
To correctly turn your system on, all doors and
windows must be in the normal (not faulted) condition.
Use this command to locate faulted points.
Bypass Points
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
1. Ensure the system is turned off (On indicator off).
2. Press [*]. If points are faulted the keypad displays
the following:
Use this command to bypass one or more points before
turning the system All On, Part On, or Part 2 On. You
can access a bypassed point when the system is armed
without activating an alarm.
System OK
Point faulted,
Press 0 to view
or
Example: Your kitchen was just painted and you want
to leave the windows open but still turn the system on.
Bypassing points allows the system to be on, but
prevents it from monitoring undesired areas.
1. Ensure that the system is turned off (On indicator
is off).
2. Press the [BYPASS] key. The keypad may prompt
you to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
scrolls all zones that can be bypassed:
3. If there are faulted points, press [0] to view. The
keypad scrolls through all faulted points:
Pt2 faulted,
Front Door
To bypass Pt2
Press 2 + *
Pt7 faulted,
Back Door
To bypass Pt7
Press 7 + *
Pt1,
Front Door
4. Return the faulted points to the normal condition
(like close the front door), or you may choose to
bypass the points by following the displayed
instructions (such as Press [2] [*]).
5. Once the points return to normal or are bypassed,
the system is ready to turn on.
To bypass Pt1
Press 1 + *.
Pt2,
Back Door
To bypass Pt2
Press 2 + *.
4. Enter the Point Number that you want to bypass
followed by [*] (for example, if you want to bypass
Point 10, enter [1] [0] [*]). Repeat this step to
bypass all desired points.
If a point is already bypassed, the keypad displays:
Pt3
Hallway
To unbypass 3
Press 3 + *
If a point is faulted, the keypad displays the point
number. If the point is bypassable, the keypad
prompts you to press the point number followed
by the [*] key. If the point is unbypassable, the
display tells you the point cannot be bypassed.
5. Press [CMD] to exit this command function.
Press [CMD] to exit this command function.
Bosch Security Systems | 9/04 | 46841E
15
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Date and Time (Cmd 45)
Date and Time (Cmd 45)
Change Passcode (Cmd 55)
ꢀ
I can perform this command.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
ꢀ
I cannot perform this command.
Use this command to program the system date and
time.
1. Ensure that the system is turned off (On indicator
is off).
Use this command to change your passcode at any
time. However, only use this feature under the
direction of your security company. The system
must be off in order to use this command.
2. Press [CMD] [4] [5]. The keypad may prompt you
to enter a valid passcode.
Write down your new and old passcode before you
begin.
3. Enter your passcode if necessary. The keypad
displays.
1. Ensure that the system is turned off (On indicator
is off).
2. Press [CMD] [5] [5]. The OK tone sounds and the
keypad displays:
Please Enter
Date and Time
MM/DD/YY HH:MM
01/01/01 00:01
Please enter
old code
4. Enter the date and time using the numeric keys in
MM/DD/YY, HH:MM format.
3. Enter your current passcode. As you enter your
passcode, the keypad displays:
Entering Code
***
Figure 5: Date and Time format
4. If the passcode you have entered is valid, you are
prompted to enter your new passcode:
___ ___ / ___ ___ / ___ ___
___ ___ : ___ ___
M
M
D
D
Y
Y
H
H
M
M
1
2
3
4
5
Please enter
new code
1 - Month of the year
2 - Day of the month
3 - Current year
4 - Hour of the day
5 - Minute of the hour
5. Enter a new passcode with the same number of
digits as your old passcode. If the error tone
sounds, try a different new passcode. As you enter
your new passcode, the keypad displays:
Entering Code
***
5. The keypad displays both the date and time you
entered before returning the keypad to the normal
display. In this example, the keypad displays.
6. If you have entered a valid new passcode, the
keypad prompts you to enter the new passcode
again:
Current Date
04/16/01
Please enter
new code again
Current Time
13:35
7. Enter your new passcode again. As you enter your
new passcode, the keypad displays:
The keypad returns to the normal display.
Entering Code
***
In the event of a power cycle (power is
lost to the system and then restored), the
control panel takes the last event in the
log and uses that as a starting point for
the time and date. It then alerts you to
enter the current time and date.
8. The keypad displays the following to confirm you
have successfully changed your passcode:
Code changed
The keypad returns to the normal display.
16
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Change Others’ Passcodes (Cmd 56)
.
8. Enter the new passcode again.
Change Others’ Passcodes
(Cmd 56)
9. The keypad displays the following to confirm the
passcode change.
Code 2 changed.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
10. Repeat Steps 4 through 9 to change another
passcode or press [CMD] to exit this feature.
Pressing [CMD] again returns to the normal
display.
Use this command to change passcodes for each user
in the system. This command requires the appropriate
authority level to change passcodes. Only use this
feature under the direction of your security
company.
Change Others’ Passcode
Authority Levels (Cmd 56)
Cmd 56 is only for changing passcodes
other than the one used to access Cmd
56. For example, if User 1 performs Cmd
56, he/she cannot modify his/her own
passcode. Use Cmd 55 instead.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
Use this command to change passcode authority levels
for each user in the system. This command requires the
appropriate authority level to change passcodes. You
cannot change your own passcode authority level.
Only use this feature under the direction of your
security company. The following is filled in by your
security company.
1. Ensure that the system is turned off (On indicator
is off).
2. Press [CMD] [5] [6]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
scrolls through the available options. If an option is
not selected after the list cycles once, the keypad
automatically exits this command.
4. Press [1] to change passcodes. The keypad scrolls
through all passcodes that are available for
changing.
•
•
•
•
Authority Level 1 includes these commands:
____________________________________________
__________________________________________
Authority Level 2 includes these commands:
____________________________________________
__________________________________________
To change code 2
press 2*.
Authority Level 3 includes these commands:
____________________________________________
__________________________________________
To change code 3
press 3*.
Authority Level 4 includes these commands:
____________________________________________
__________________________________________
Push Cmd to exit
5. Enter the passcode number (1 to 32) you want to
change followed by [*]. For example, press [2] [*]
to change Passcode 2. The keypad prompts you to
enter the new passcode.
1. Ensure that the system is turned off (On indicator
is off).
2. Press [CMD] [5] [6]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
scrolls the following:
Please enter new
code 2.
If the user does not exist in the system,
the keypad emits an error tone.
Push 1 to change
codes.
Push 2 to change
authority level.
6. Enter the new passcode with the same number of
digits as the old passcode. If the error tone sounds,
try a different new passcode.
7. If you have entered a valid new passcode, the
keypad prompts you to enter the new passcode
again.
Please enter new
code 2 again.
Bosch Security Systems | 9/04 | 46841E
17
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Add a Passcode (Cmd 56)
4. Press [2] to change passcode authority levels. The
keypad display scrolls:
Add a Passcode (Cmd 56)
To change level
for code 3,
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
Press 3*.
Use this command to add new passcodes to the system.
This command requires the appropriate authority level
to add passcodes. To add a new passcode to the
system, you must assign an area(s) to the new user in
addition to using the other Cmd 56 features (changing
a passcode and changing a passcode authority level) as
outlined below. Only use this feature under the
direction of your security company.
1. Ensure that the system is turned off (On indicator
is off).
2. Press [CMD] [5] [6]. The keypad may prompt you
to enter a valid passcode.
To change level
for code 4,
Press 4*.
Push Cmd to exit
5. Enter the passcode number (1 to 32) that you want
to change the authority level for, followed by [*]
(for example, press [3] [*] to change the authority
level for Passcode 3). The keypad display scrolls
the following:
3. Enter your passcode. The keypad scrolls through
the following selections:
Code 3 level 2
Enter new level.
Push 1 to change
codes.
Level choices
are 1 to 4.
Push 2 to change
authority level.
Push Cmd to exit
Push 3 to change
areas assigned.
If the user does not exist in the system,
the keypad emits an error tone.
4. Press [3] to assign an area(s) to the new user.
5. Enter the user number you wish to assign area(s) to
followed by the [*] key. For example, for User 4,
press [4] [*]). The keypad toggles between the
following displays:
6. Enter the new authority level (1 to 4) for the
passcode that you want to change. The authority
levels are determined by the installing company.
7. Press [CMD] to exit this feature. Press [CMD]
again to return to the normal display.
Code 4 Areas:
----
Press 1 to 4 to
toggle areas.
6. Enter the area(s) you want to assign to the new
user by pressing the appropriate numeric key(s).
For example, if the user is to be assigned to Areas
1 and 2, press the [1] and [2] keys. The keypad
displays:
Code 4 Areas:
12--
To remove a currently assigned area(s), press the
corresponding numeric key(s). For example, if
User 4 is assigned to Areas 1 and 2, but should
only be assigned to Area 1, press [2] to remove
Area 2 from User 4’s area assignment.
7. Press [CMD] twice to return to the three Cmd 56
selections. Then, press [1] to create a passcode for
the new user.
8. Enter the user number followed by [*]. For
example, press [4] [*] to create the passcode for
User 4.
18
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Delete Passcodes (Cmd 58)
.
9. When the display prompts, Please enter new code,
enter a new passcode. If the error tone sounds, try Delete Passcodes (Cmd 58)
a different new passcode. Enter the new passcode
again for verification.
ꢀ
ꢀ
I can perform this command.
I cannot perform this command.
10. Press [CMD] twice to return to the three Cmd 56
selections. Then press [2] to assign a passcode
authority level to the new user.
11. Enter the user number and press [*]. For example,
press [4] [*] to assign an authority level for User 4.
12. Enter an authority level (1 to 4) by pressing the
appropriate numeric key. keypad displays:
Use this command to delete passcodes. This command
requires the appropriate authority level to delete
passcodes. You cannot delete your own passcode using
this command. Only use this feature under the
direction of your security company.
1. Make sure the system is turned off (On indicator is
off).
2. Press [CMD] [5] [8]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
prompts you to delete a code.
Code 4 level 0.
Enter new level.
The number following the word “level” on the first
line indicates the authority level the user passcode
is currently assigned to.
Delete code 1?
Press 1*.
13. Use Steps 1 through 12 to add more new users or
press [CMD] until the keypad emits a single beep
tone and the display returns to the normal display.
Delete code 2?
Press 2*.
The new user passcode, area assignment
and authority level automatically logs into
the system’s programming memory. Make
sure that your security company’s
programming records are properly
updated.
Push Cmd to exit
4. Enter the passcode number (1 to 32) you want to
delete. For example, press [2] [*] to delete
Passcode 2.
Code 2
deleted.
Press * to
continue.
If the user does not exist in the system,
the keypad emits an error tone.
5. Press [CMD] to exit this command. If no keys are
pressed, the keypad automatically returns to the
normal display.
Bosch Security Systems | 9/04 | 46841E
19
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Renew One-time Passcodes (Cmd 53)
Renew One-time Passcodes
(Cmd 53)
Check System Troubles (Cmd 4)
Your system emits a trouble tone and displays the
System Trouble message to alert you to a system
trouble event, like low batteries. Use this command to
learn what is causing the trouble and the steps to take
to correct it.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
One-time passcodes can only be used once to turn the
system off. This command allows those with the
applicable authority level to renew previous One-Time
passcodes. Once renewed, the One-Time passcode is
again able to turn the system off only once.
1. Make sure the system is turned off (On indicator is
off).
2. Press [CMD] [5] [6]. The keypad may prompt you
to enter your passcode.
3. Enter your passcode if necessary. The keypad
scrolls through the available one-time passcodes.
1. The system may be on or off when a system
trouble occurs. If the system is on, you must turn it
off to check the trouble. The keypad displays:
Trouble! Press
Cmd 4 to view.
2. Press [CMD] [4]. The trouble tone silences and the
keypad scrolls through the list of troubles. Follow
the keypad display instructions to view the trouble
events.
Point Trouble!
Press 8 to view.
To renew all
One-time codes
Alarm Memory!
Press 0 to view.
Press 0*.
Date/time lost!
Press 5 to set.
To renew code 5
Press 5*.
System Trouble!
Press 2 to view.
4. Press [0] [*] if you want to renew all one-time
passcodes or press the passcode number followed
by [*]. For example, if you want to renew Passcode
5, press [5] [*].
5. If you press [0] to renew all one-time passcodes,
the keypad displays:
To Test System,
press 1.
To Walk Test,
press 4.
To reset,
Press 7.
All one-time
codes renewed.
System OK!
Press Cmd.
6. If you select a single passcode to renew, like
Passcode 5, the keypad displays:
3. Press [CMD] to return the keypad to the normal
display.
One-Time Code 5
renewed.
The trouble tone continues until the situation is
acknowledged.
7. The system returns to the normal display.
The trouble tone for AC Failure events
sounds at all keypads in all areas.
However, the trouble tone must be
silenced in each area (silencing it in one
area does not silence it in the other
areas).
20
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | View Alarm Memory (Cmd 40)
.
View Alarm Memory (Cmd 40)
View System Trouble (Cmd 42)
After an alarm is silenced and cleared from the display, Use this command to view system troubles. For
you can still review the points in alarm.
1. Ensure the system is turned off (On indicator is
off).
2. Press [CMD] [4] [0]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
shows all points in alarm memory. In this example,
the keypad displays that Point 5 alarmed.
example, a system trouble occurs when the system is
running only on the backup battery, there is
communications trouble, or it is time for the system to
be serviced by your security company.
1. Ensure the system is turned off (On indicator is
off).
2. Press [CMD] [4] [0]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
shows all points in alarm memory. In this example,
the keypad displays that Point 5 alarmed.
Alarm Pt5
Bedroom 1 Window
If you enter your passcode before the system
reports to your alarm company, the keypad
displays:
If the system has no AC main supply and is
operating off the backup battery, the keypad
displays:
Abort Pt8
Bedroom 1 Window
System running
on battery only.
When the last alarm is shown, the keypad displays:
If the system detects the telephone line is missing
or there is no dial tone, the following appears on
the keypad.
To clear memory,
Turn system On.
If no alarm memory is present, the keypad
displays:
Line 1 trouble.
Check Dial tone.
No alarms in
If the system fails to communicate with the security
company, the keypad displays:
system memory.
4. The keypad returns to the normal display. Turn
the system on again to clear alarm memory.
Comm Fail
Destination 1
If the system was programmed to be serviced by
your security company at the service interval, the
keypad displays the following:
Call for service
If there are no system troubles, the keypad
displays:
There are no
system troubles!
4. Press [CMD] to return to the normal display.
Bosch Security Systems | 9/04 | 46841E
21
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | View Point Trouble (Cmd 48)
4. Listen for bell activation.
View Point Trouble (Cmd 48)
The strobe output is tested next. This test resets
after approximately 20 min or when [*] is pressed.
Use this command to view any points (if any) that are
in trouble.
Testing Strobe.
Press * to End
1. Ensure the system is turned off (On indicator is
off).
5. Check for strobe activation.
2. Press [CMD] [4] [8]. The keypad may prompt you
to enter a valid passcode.
The next component to be tested is the back-up
battery. This test may take up to 4 min.
3. Enter your passcode if necessary. The keypad
scrolls through all points in trouble.
Testing Battery
May take 4 min.
Be sure to investigate the source of the trouble
condition. Correct the condition if possible. For
example, remove objects blocking a sensor point
or respond appropriately to the trouble indicated.
The keypad displays the result of the battery test:
Battery Test
failed!
Battery Test
or
passed.
Please call for
service.
If there are no points in trouble, the keypad
displays:
Finally, the phone connection is tested. This test
may take up to 10 min.
There are no
point troubles.
Testing Phone.
May take 10 min.
4. Press [CMD] to return to the normal display.
The keypad displays the result of the phone line
test:
System Test (Cmd 41)
ꢀ
I can perform this command.
Phone Test
failed.
ꢀ
I cannot perform this command.
Phone Test
or
passed.
Please check for
dial tone.
The System Test ensures your system is operating
correctly by testing the system’s bell, strobe, battery,
and phone line. Only those programmed by your
installing security company will be tested. For example,
the system may only be programmed to test the back-
up battery and the bell output.
6. When the test is complete, the system returns to
the normal display.
7. To stop the test currently in progress and skip to
the next test, press [*] . To abort all system tests
and return to the normal display, press [CMD].
I can test:
ꢀ
ꢀ
ꢀ
ꢀ
System Bell
Battery
System Strobe
Phone Line
If any of these components fail to test, contact your
security company for assistance. Be sure to contact
your security company before you begin the system
test.
1. Ensure the system is turned off (On indicator is
off).
2. Press [CMD] [4] [1]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The system starts
the test. The bell output is tested first and should
sound for approximately 2 sec to 3 sec The display
shows:
Testing Bell.
22
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Walk Test (Cmd 44)
.
Walk Test (Cmd 44)
Reset the System (Cmd 47)
ꢀ
I can perform this command.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
ꢀ
I cannot perform this command.
Use this command to walk-test detection devices
connected to your system. Perform the Walk Test on a
weekly basis. The types of devices that can be walk-
tested are configured by your security company.
1. Ensure the system is turned off (On indicator is off).
2. Press [CMD] [4] [4]. The keypad may prompt you
to enter a valid passcode.
Use this command to reset the system (including fire
points) after an alarm. Detection devices, such as
smoke detectors and shock sensors, must be reset after
being activated. Resetting the system takes about 20
sec.
If points do not reset, contact your installing company
for help.
3. Enter your passcode if necessary. The system starts
the walk test.
1. Ensure the system is turned off (On indicator is off).
2. Press [CMD] [4] [7]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The system resets
and the keypad displays:
The keypad display scrolls all points one at a time
that need to be tested. To successfully test each
point, you must trigger the corresponding detection
device, such as reed switch or PIR).
Resetting...
Pt2 Un-Tested
Front Door.
After the system has reset, the keypad display
automatically returns to the normal display.
Pt3 Un-Tested
Hallway.
Pt4 Un-Tested
Living Room.
Turn Watch On/Off (Cmd 61)
ꢀ
I can perform this command.
To stop test
Press Cmd.
ꢀ
I cannot perform this command.
As each point is tested, the keypad display scrolls:
Use the Watch feature to “watch” points when the
system is off. For example, parents with small children
may want a tone to sound whenever a door or window
is opened as a way of monitoring the location of the
children.
Pt2 Tested OK
Front Door
Pt3 Tested OK
Hallway
4. To stop testing, press [CMD].
Use this command to turn the watch feature on and off.
Once you have programmed the system with points to
watch and the responses (refer to Select Watch Tone
(Cmd 62) on page 24), you need to turn the watch
function on and off.
Test fire detection devices (smoke/heat
detectors) weekly as instructed by your
security company and in accordance with
the devices’ instructions.
1. Ensure the system is turned off (On indicator is off).
2. Press [CMD] [6] [1]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
displays the current Watch status (On or Off).
4. Press [1] to turn Watch On or press [2] to turn
Watch Off.
5. Press [CMD] to exit this feature.
Bosch Security Systems | 9/04 | 46841E
23
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Select Watch Tone (Cmd 62)
Select Watch Tone (Cmd 62)
Select Watch Points (Cmd 63)
ꢀ
I can perform this command.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
ꢀ
I cannot perform this command.
The Watch feature gives you the ability to watch points
when the system is turned off. The system can be
programmed to alert you to opened doors and
windows. For example, parents with small children
may want a tone to sound whenever a door is opened
to monitor the children.
Once you decide how your system responds to
watched points (refer to Select Watch Tone (Cmd 62)),
you need to decide which of the points in your system
are “watched”.
Use this command to tell your system which points to
watch. You cannot watch 24-hour and 24-hour fire
points.
Use this command to set the type of response your
system produces when a watch point is faulted. If you
wish, you may tell your system to display the identity
of the point and sound a short tone whenever certain
doors or windows are opened. Refer to Select Watch
Points (Cmd 63) to program which points in your
system are to be watched.
1. Ensure the system is turned off (On indicator is off).
2. Press [CMD] [6] [2]. The keypad may prompt you
to enter a valid passcode.
Choosing which points to watch depends upon your
security objective. If you have small children, you may
choose to watch points of entry and exit. Each time a
watch point is faulted (door or window is opened), the
keypad responds as programmed.
1. Ensure the system is turned off (On indicator is off).
2. Press [CMD] [6] [3]. Enter your passcode if
necessary. The keypad displays all points that are
currently being watched (Watch On) and those that
are not (Watch Off), followed by instructions for
changing the current setting.
3. Enter your passcode if necessary. The keypad
displays the current watch tone.
4. Select the type of watch tone (1 to 4) you want by
pressing the appropriate number key.
3. Press [0] [*] to turn Off all points. Press the
appropriate number key (non-24-hour points)
followed by [*] for individual points.
Table 6: Watch Tone Selection
The display continues to scroll the remaining
points. You may continue to program as many
Watch Points as are available.
Watch Tone
Key
Description
4. When you are finished, press [CMD] to return exit
this command.
Off
[1]
Displays point identity, but
sounds no tone when points are
faulted.
Short Beep
[2]
Displays point identity and
sounds a short tone when point
are faulted.
Extend Auto On Time (Cmd 51)
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
Beep Till Key [3]
Displays point identity and
sounds a tone until the [CMD]
key is pressed.
Displays point identity and
sounds a tone until the point is
returned to normal (door or
Your security company can program your system to
turn on automatically. Use this command to delay the
auto-on time by one hour during the auto-on pre-alert
time.
Beep Till
Closed
[4]
1. Ensure the system is turned off (On indicator is off).
2. Press [CMD] [5] [1]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
scrolls:
window is closed). Pressing the
[CMD] key also silences the tone.
If you just want to review (not change) the current
watch tone setting, press [CMD] to exit this
function.
Auto-On Time
moved to:
5. After making your selection, the display confirms
the choice you made.
6. Press [CMD] to exit this feature.
hh:mm
mm/dd/yy
To exit,
Press Cmd.
4. Press [CMD] to exit.
24
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Change Skeds (Cmd 52)
.
5. The keypad scrolls all skeds that turn the system
All On. Press the number key of the sked you want
to change followed by [*].
Change Skeds (Cmd 52)
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
Sk# A# All On
Time ##:##
Sk# A# 12345678
Days
SMTWRFSA
Use this command to change the time or date that the
sked automatically turns the system All On, Part On,
Part 2 On, off, or operates an output programmed by
your security company. An output can be
programmed by your security company to turn on
lighting, a pool pump, etc.
6. Enter the time you want the system to
automatically turn All On (HH:MM). In this
example, program Sked 1 in Area 1 for 10:35 p.m.
Sk1 A1 Auto On
Time 22:35
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
1. Make sure the system is turned off (On indicator is
off).
2. Press [CMD] [5] [2]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
scrolls all available options.
4. Push the appropriate key for the option you want.
Sk1 A1 12345678
•
•
•
•
•
•
Push [1] to change All On Skeds.
Push [2] to change Part On Skeds.
Push [3] to change Part 2 On Skeds.
Push [4] to change Off Skeds.
Push [5] to change Output On Skeds.
Push [6] to change Output Off Skeds.
Days
-MTWRF--
8. You want to add Saturday. To add Saturday, press
[7].
Sk1 A1 12345678
Days
-MTWRFS-
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
Sked All Days Feature
If your security company has programmed
Sk1 A1 12345678
all days of the week for the sked you wish
to change, you must press the [8] key to
remove all days first (A), and then press
the corresponding number key(s) to add
or remove the desired days.
Days
--TWRFS-
10. Press [CMD] when you are done changing the
sked.
Part On Skeds
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to
4.
Sk1 A1 12345678
Days
SMTWRFSA
5. The keypad scrolls all skeds that turn the system
Part On. Press the number key of the sked you
want to change followed by [*].
The figure above shows an “A” below “8.” This
indicates the Sked All Days feature is on, which means
the sked is now active every day of the week. If you do
not want to use this feature, press the [8] key once to
clear the “A”, and then press the corresponding
number key(s) to activate or deactivate the sked for the
desired day(s).
Sk# A# Part On
Time ##:##
Sk# A# 12345678
Days
SMTWRFSA
6. Enter the time for the system to automatically turn
Part On (HH:MM). In this example, program Sked
2 in Area 1 for 5:00 p.m.
For example, if you do not want your sked to operate
on Mondays and Wednesdays, first press the [8] key to
turn the All Days feature off. Then press the
corresponding number keys to clear Monday and
Wednesday from the sked.
Sk2 A1 Part On
Time 17:00
All On Skeds
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to
4.
Bosch Security Systems | 9/04 | 46841E
25
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Change Skeds (Cmd 52)
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
10. Press [CMD] when you are done changing the
sked.
Sk2 A1 12345678
Days
-MTWRF--
8. You want to add Saturday. To add Saturday, press
[7] .
Sk2 A1 12345678
Days
-MTWRFS-
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
Sk2 A1 12345678
Days
--TWRFS-
10. Press [CMD] when you are done changing the
sked.
Part 2 On Skeds
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to
4.
5. The keypad scrolls all skeds that turn the system
Part 2 On. Press the number key of the sked you
want to change followed by [*].
Sk# A# Part On
Time ##:##
Sk# A# 12345678
Days
SMTWRFSA
6. Enter the time for the system to automatically turn
Part 2 On (HH:MM). In this example, program
Sked 3 in Area 2 for 7:30 p.m.
Sk3 A2 Part On
Time 19:30
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
Sk3 A2 12345678
Days
-MTWRF--
8. You want to add Saturday. To add Saturday, press
[7].
Sk3 A2 12345678
Days
-MTWRFS-
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
Sk3 A2 12345678
Days
--TWRFS-
26
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Change Skeds (Cmd 52)
.
7. The second line displays the days as programmed
by your security company. Enter the days for the
Off Skeds
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to
4.
5. The keypad scrolls all skeds that turn the system
off. Press the number key of the sked you want to
change followed by [*].
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
Sk# A# Off
Time ##:##
Sk# A# 12345678
Days
Sk5
Days
12345678
-MTWRF--
SMTWRFSA
6. Enter the time for the system to automatically turn
off (HH:MM). In this example, program Sked 4 in
Area 3 to turn off at 7:00 a.m.
8. You want to add Saturday. To add Saturday, press
[7].
Sk5
Days
12345678
-MTWRFS-
Sk4 A3 Off
Time 07:00
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
Sk5
Days
12345678
--TWRFS-
10. Press [CMD] if you are done changing the sked.
Output Off Skeds
Sk4 A3 12345678
This section is intended for turning
outputs off.
Days
-MTWRF--
8. You want to add Saturday. To add Saturday, press
[7].
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1 to
4.
5. The keypad scrolls all skeds that turn the outputs
off. Press the number key of the sked you want to
change followed by [*].
Sk4 A3 12345678
Days
-MTWRFS-
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
Sk# Output ## Off
Time ##:##
Sk#
Days
12345678
SMTWRFSA
Sk4 A3 12345678
Days
--TWRFS-
6. Enter the time for the system to automatically
operate Output 01 (HH:MM). In this example,
Sked 5 is set for 1:00 a.m.
10. Press [CMD] when you are done changing the
sked.
Output On Skeds
Sk6 Output 1 Off
Time 24:00
This section is intended for turning
outputs on.
7. The second line displays the days as programmed
by your security company. Enter the days for the
system to automatically turn All On (Sunday = 1,
Saturday = 7, and all days = 8). In this example,
suppose your security company programmed the
sked for Monday, Tuesday, Wednesday, Thursday,
and Friday.
Refer to Change Skeds (Cmd 52) on page 25 for Steps 1
to 4.
5. The keypad scrolls all skeds that turn the outputs
on. Press the number key of the sked you want to
change followed by [*].
Sk6
Days
12345678
-MTWRF--
Sk# Output ## On
Time ##:##
Sk#
Days
12345678
SMTWRFSA
8. You want to add Saturday. To add Saturday, press
[7].
6. Enter the time for the system to automatically
operate Output 01 (HH:MM). In this example,
Sked 5 is set for 12:00 a.m.
Sk6
Days
12345678
-MTWRFS-
Sk5 Output 1 On
Time 24:00
Bosch Security Systems | 9/04 | 46841E
27
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Change Outputs (Cmd 54)
9. You now decide that you do not want this sked to
activate on Monday. To remove Monday, press
[2].
3. Enter your passcode if necessary. The keypad
displays:
Remote Program
in progress.
Sk6
Days
12345678
--TWRFS-
If your system is busy and cannot call your
security company’s remote PC computer, the
keypad displays:
10. Press [CMD] when you are done changing the
sked.
System Busy.
Change Outputs (Cmd 54)
Try again later.
4. The keypad automatically returns to the normal
display when programming is complete.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
Use this command to turn on and off the outputs
programmed by your security company. These outputs
can control outside lighting, pool pumps, watering
systems, etc.
All Areas Off (Cmd 81)
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
1. Ensure the system is turned off (On indicator is
Depending on the areas assigned to your authority
level, this command turns off all areas at the same time
when the system is split into more than one area.
1. Press [CMD] [8] [1]. The keypad may prompt you
to enter a valid code.
off).
2. Press [CMD] [5] [4]. The keypad may prompt you
to enter a valid passcode.
3. Enter your passcode if necessary. The keypad
scrolls:
2. Enter your passcode if necessary. The keypad
indicates that all areas are off.
Turn all Outputs
Off? Press 0*
Output 1 is On
To turn Off
All Areas On (Cmd 80)
ꢀ
I can perform this command.
Press 1*
ꢀ
I cannot perform this command.
4. Press [0] [*] if you want to turn all outputs off, or
press the output number you want to turn off
followed by [*]. For example, if you want to turn
Output 1 off, you press [1] [*]. The keypad
displays:
Depending on the areas assigned to your authority
level, this command turns on all areas at the same time
when the system is split into more than one area.
1. Press [CMD] [8] [0]. The keypad may prompt you
to enter a valid passcode.
Output 1 is Off
To Turn On
2. Enter your passcode if necessary. The keypad
displays:
5. Press [CMD] to return the keypad to the normal
display.
All Areas All On
Exit Now!
If an area has a faulted point(s) when you try to
turn all areas All On, the keypad scrolls:
Remote Program (Cmd 43)
ꢀ
I can perform this command.
Area 2 not ready
Smiths Residence
ꢀ
I cannot perform this command.
Area 4 not ready
Smiths Residence
Use this command to connect to your security
company’s remote PC computer for programming
alterations via the telephone line.
To force area on
hold All On key.
Only use this command when your
security company instructs you to.
To stop,
press Cmd.
3. If you hold down the All On key for 2 sec., it
forces all areas to All On.
1. Ensure the system is turned off (On indicator is
off).
2. Press [CMD] [4] [3]. The keypad may prompt you
to enter a valid passcode.
All Areas All On
Exit Now!
28
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Move to Area (Cmd 50)
.
4. The keypad now displays all areas that have been
forced on, one at a time.
Auto-Forward On Setup
(Cmd 83)
A-2 Forced On
Smiths Residence
To utilize this command you must have “call
forwarding” service from your local telephone
company. Using that service, your security system
allows you to program the auto-forward on sequence
that forwards all incoming calls to the telephone
number of your choice when you turn the system All
On.
A-4 Forced On
Smiths Residence
Move to Area (Cmd 50)
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
1. Press [CMD] [8] [3]. The keypad may prompt you
to enter a valid passcode.
2. Enter your passcode if necessary. The keypad
display scrolls:
Use this command to operate multiple areas from the
same keypad when the system is split into more than
one area. Before operating another area, move the
keypad to the area that you want to operate.
1. Press [CMD] [5] [0]. The keypad may prompt you
to enter a valid passcode.
Auto-Forward On
setup mode.
Enter digits for
Auto-Forward On
2. Enter your passcode if necessary. The keypad
scrolls through all available areas you can move to.
In this example, you are at Area 1 keypad, which
prompts you to press 2 to go to Area 2 or to press
3 to go to Area 3:
For ‘pause’ (P),
press All On.
For ‘flash’ (F)
press Part On.
To go to Area 2
Smiths Residence
A and C keys
move cursor.
Press 2.
To delete digit,
Press B key.
To go to Area 3
Smiths Residence
To view and edit
press Bypass.
Press 3.
To stop edit,
Press Bypass.
To exit
Press Cmd.
To exit,
Hold Cmd.
3. Press [CMD] to exit this feature.
4. To return your keypad to its “home” area, press
and hold [CMD].
3. Enter the auto-forward off sequence to redirect all
incoming calls.
4. Press and hold [Cmd] to exit this command.
A typical dialing sequence might be:
•
•
•
•
•
two-digit telephone company feature code (72)
pause
phone number to forward to (315-555-1212)
flash (on-hook, pause, off-hook)
terminate (t)
For this sequence, the entry would look like:
7 2 p 3 1 5 5 5 5 1 2 1 2 f t
Bosch Security Systems | 9/04 | 46841E
29
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Auto-Forward Off Setup (Cmd 84)
Auto-Forward Off Setup
(Cmd 84)
Auto-Forward On/Off (Cmd 82)
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
ꢀ
I can perform this command.
Use this command to turn the auto-forward feature on
or off as necessary.
1. Press [CMD] [8] [2]. The keypad may prompt you
to enter a valid passcode.
2. Enter your passcode if necessary. The keypad
displays the current status and the available
options.
ꢀ
I cannot perform this command.
Use this command to program the auto-forward off
sequence that cancels the redirecting of all incoming
calls to another telephone number when you turn the
system off.
1. Press [CMD] [8] [4]. The keypad may prompt you
to enter a valid passcode.
Program the Auto-Forward feature by pressing [1]
to turn Auto-Forward On, or [2] to turn Auto-
Forward Off. For example, if Auto-Forward is On,
press [2] to turn it Off.
2. Enter your passcode if necessary. The keypad
display scrolls:
Auto-Forward Off
setup mode.
3. To exit this function, press [CMD].
Enter digits for
Auto-Forward Off
For ‘pause’ (P),
press All On.
For ‘flash’ (F)
press Part On.
A and C keys
move cursor.
To delete digit,
Press B key.
To view and edit
press Bypass.
To stop edit,
Press Bypass.
To exit,
Hold Cmd.
3. Enter the auto-forward off sequence to redirect all
incoming calls.
4. Press and hold [CMD] to exit this command.
30
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Remote Arming with Telephone, Area 1
.
Remote Arming with Telephone,
Area 1
View Log (Cmd 85)
ꢀ
I can perform this command.
ꢀ
I can perform this command.
ꢀ
I cannot perform this command.
ꢀ
I cannot perform this command.
Use this command to display system events, such as
alarm events, turning the system All On, Part On, and
Part 2 On, and turning the system off. Events are
displayed in reverse chronological order.
This function controls the built-in telephone arming
feature for Area 1. When enabled, the control panel
answers the phone on the programmed ring count.
1. Press [CMD] [8] [5]. The keypad may prompt you
to enter a valid passcode.
2. Enter your passcode if necessary. The keypad
displays the event and user information and the
date and time of the event.
3. Press [*] to view to the next event.
4. Press [CMD] to exit this function and return to the
normal display.
When the control panel answers the phone, it
•
Sounds three beeps and starts the handshake tone
for remote programming if the control panel is All
or Part On.
•
Sounds one short beep, waits approximately 3 sec.,
and then sounds one long beep if the control panel
is Off. Press and hold the [5] key* for 2 sec.
immediately after the first short arming beep and
before the long beep begins.
Figure 6 shows a sample log event entry as
displayed on the Text keypad:
•
Arms if it detects a [5] key press from the
telephone (All On with Delay, faulted points are
force-armed). The control panel sounds three
beeps (new armed state) and then hangs up.
Figure 6: Display layout
1
1
*
If arming from a cell phone, quickly press the [5] key three times. If
pressing and holding the [5] key for 2 sec. from a house (land line)
phone does not produce a tone long enough to arm Area 1, retry
by quickly pressing the [5] key three times.
Sensor Mon Rstl
Sensor Mon Rstl
08:29
06/13/01
A1 Pt3
SL
Remotely disarming the control panel
cannot be done with a telephone.
4
2
6
5
3
1 - Event
2 - Event specific
information
4 - Destination 2
5 - Time of event
6 - Date of event
3 - Destination 1
The first line of the log shows the event
description. The second line of the log display
alternates between the time and date of the event
and the area, point (device), user and
communication information for the event. The
keypad displays time in a 24-hour format and the
date in a MM/DD/YY format.
The log displays the following characters to
communicate certain information:
Bosch Security Systems | 9/04 | 46841E
31
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Basic Pager Reports
Table 7: Character Code Information
Basic Pager Reports
A pager’s display can show up to four fields of
information in the following order:
Display
A#
Description
Area number
Pt##
Dv###
Ln##
Mn#
Cd##
Op##
Ks##
U##
Point number
Device number
Figure 7: Pager Display format
(Account Number) - (Event Number) - (Area Number) - (Point/User Number)
Phone line number
Minutes until Auto Arm Sked
User Code number
Output number
Keyswitch number
User number
Communication status for Routing Destinations
1 and 2
Destination disabled
Aborted
Deleted from pending buffer by control panel
reset
Faulted
Local
Pending
Sent
•
•
Account Number: 4-digit account number. If the
account number is greater than four digits, the first
four digits are sent.
Event Number: Panel event numbers. See Panel
Event Descriptions on page 43 for information on
control panel events.
Area Number: Area number the faulted point is
assigned to.
Point/User Number: Point number assigned to
the faulted point. This field can also show a User
ID number.
##
•
•
- (dash)
A
D
F
L
P
S
Depending on its configuration, your pager can display
any combination of the four fields shown in the order
above with or without field separators. For example:
•
•
•
•
Account Number: 1234
Event Number: 08
Area Number: 02
Point Faulted: 21
A pager display configured to show all four fields with
separators using the sample information from above
would look like:
1234-08-02-21
A pager display configured to show all four fields
without separators using the sample information from
above would look like:
1234080221.
Contact your security company to modify pager
display configuration.
•
•
•
User IDs 1 to 32 are reserved for system user.
User ID 252 is reserved for sked operation.
User ID 253 is reserved for remote telephone
communication.
•
•
User ID 254 is reserved for remote programming
communication.
User ID 255 is reserved for keyswitch operation.
32
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Control Panel Event Descriptions
.
Control Panel Event Descriptions
The following table lists the events generated by the control panel. These events appear in the control panel log by
name and in the pager display by event number.
Table 8: Control Panel Event Descriptions
Event #
Event
Description
Event #
Event
Description
01
AC Fail
AC power to control panel
interrupted.
24
Rstrl Batt Low Battery restoral from low battery.
02
03
04
AC Restore
AC power to control panel
restored.
Alarm from detection device
tampered with.
Alarm from emergency detection
device or ABC key programmed
for emergency response.
25
26
27
Rstrl Batt
Missing
Bypass, Fire,
User
Bypass, Fire,
RAM IV
Battery restoral from missing
battery.
Selective bypass by user of fire
detection device.
Selective bypass of fire detection
device by RAM IV.
Alarm,
Tamper
Alarm,
Emergency
05
06
Alarm, Panic
Alarm from panic/emergency
detection device.
Alarm from detection device that
does not appear at keypad during
alarm or trouble conditions.
28
29
Bypass, Ctrl,
User
Bypass, Ctrl,
RAM IV
Selective bypass by user of
controlled detection device.
Selective bypass by RAM IV of
controlled detection device.
Alarm,
Invisible
07
Alarm,
24-hr. Burg
Alarm from burglary detection
device on 24 hours per day.
30
Bypass, 24-hr, Selective bypass by user of 24-hr.
User
non-fire detection device.
08
09
Alarm, Cntrl,
Dly
Alarm,
Cntrl
Alarm from detection device with
entry/exit delays.
31
32
Bypass, 24-
hr., RAM IV
Bypass,
Selective bypass by RAM IV of 24-
hr. non-fire detection device.
Alarm from detection device such
as keyswitches, motion detectors
(followers), or devices that initiate
an alarm immediately (do not follow
any entry/exit delays).
Tamper alarm from detection
device with Cross Point option
selected.
Emergency alarm from detection
device with Cross Point option
selected.
Panic alarm from detection device
with Cross Point option selected.
Detection device force-armed
Point swinger bypassed.
Forced Pt
10
11
Cross,
Tamper
33
34
35
Bypass,
Swinger
Cross,
Emergency
UnBypass,
Fire, Usr
User cleared bypass (unbypass) of
fire detection device.
12
13
Cross, Panic
UnBypass,
Ctrl, Usr
UnBypass,
24-hr., Usr
User cleared bypass (unbypass) of
controlled detection device.
User cleared bypass (unbypass) of
24-hr. detection device.
Cross,
Invisible
Panic alarm from invisible detection 36
device with Cross Point option
selected.
14
15
16
17
Cross,
24-hr. Burg
Burglary alarm from detection
device with Cross Point option
selected.
Alarm from entry/exit detection
device with Cross Point option
selected.
Alarm from keyswitch, follower, or
instant detection device with Cross
Point option selected.
Fault on one non-fire point type
with Cross Point option selected.
This is not an alarm event.
37
38
39
40
Call For
Service
Report sent automatically at Call
For Service interval. Does not
indicate a trouble condition.
User acknowledged active alarm
before bell time expired for non-fire
detection device.
User acknowledged active alarm
before bell time expired for fire
detection device.
Checksum on control panel
parameters failed. Contact security
company to verify control panel
program.
Cross, Cntrl,
Dly
Cancel Alarm
Cancel Fire
Cross,
Cntrl
Cross,
Unverified
CheckSum
Fail
18
Alarm Exit
Error
Detection device faulted at end of
exit delay.
41
CheckSum
Fail, SDI
Checksum on SDI device
parameters failed. Contact security
company.
Bosch Security Systems | 9/04 | 46841E
33
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Control Panel Event Descriptions
Table 8: Control Panel Event Descriptions (continued)
Event #
Event
Description
Event #
Event
Description
42
Cls, All, +Dly,
Skd
System turned All On with
entry/exit delay by sked.
63
Frc, Prt,
+Dly, KS
System forced Part On with
exit/entry delay by keyswitch.
43
44
Cls, All, +Dly,
KS
Cls, All, +Dly,
RAM IV
System turned All On with
entry/exit delay by keyswitch.
System turned All On with
entry/exit delay by
RAM IV.
64
65
Frc, Prt,
+Dly, RAM IV
Frc, Prt,
+Dly, Usr
System forced Part On with
exit/entry delay by RAM IV.
System forced Part On with
exit/entry delay by user.
45
Cls, All, +Dly,
Tel
System turned All On with
entry/exit delay by telephone.
66
Frc, Prt,
-Dly,
System forced Part On with no
delay (instant) by RAM IV.
RAM IV
46
47
Cls, All,
-Dly, Usrl
Cls, All,
-Dly,
RAM IV
System turned All On with no delay 67
(instant) by user.
System turned All On with no delay 70
(instant) by RAM IV.
Frc, Prt,
-Dly, Usr
Comm Fail,
AltComm
System forced Part On with no
delay (instant) by user.
Report failed to reach routing
destination configured for Alternate
Communication.
48
49
Cls, All,
-Dly, Usr
System turned All On with no delay 71
(instant) by user.
Comm,
Restoral
After communication fail, report
successfully sent to routing
destination.
After communication fail, report
successfully sent to routing
destination configured for Alternate
Communication.
Cls, Prt,
+Dly, Skd
System turned Part On with
entry/exit delay by sked.
72
Comm Rstl,
AltComm
50
51
Cls, Prt, +Dly, System turned Part On with
KS entry/exit delay by keyswitch.
Cls, Prt, +Dly, System turned Part On with
RAM IV entry/exit delay by RAM IV.
73
74
Date/Time
Change
Duress
Date/Time in control panel
changed.
User entered Duress passcode or
pressed Panic key sequence on RF
Keyfob.
52
53
Cls, Prt, +Dly, System turned Part On with
75
76
Fire, Alarm
Fire, Cross
Alarm event on fire detection
device.
Verified alarm event on fire
detection device with Cross Point
option.
Usr
entry/exit delay by user.
Cls, Prt,
-Dly,
System turned Part On with no
delay (instant) by RAM IV.
RAM IV
54
55
Cls, Prt,
-Dly, Usr
System turned Part On with no
delay (instant) by user.
77
78
Fire,
Unverified
Unverified alarm event on fire
detection device with Cross Point
option.
Fire detection device assigned to
point expander (wired or RF) not
responding to control panel status
poll.
Frc, All, +Dly,
Skd
System forced All On with
entry/exit delay by sked.
Fire, Missing
56
57
58
59
60
Frc, All, +Dly,
KS
Frc, All, +Dly,
RAM IV
Frc, All, +Dly,
Tel
Frc, All, +Dly,
Usr
System forced All On with
entry/exit delay by keyswitch.
System forced All On with
entry/exit delay by RAM IV.
System forced All On with
entry/exit delay by telephone.
System forced All On with
entry/exit delay by user.
System forced All On with no delay 83
(instant) by RAM IV.
79
80
81
82
Fire, Alarm,
Rstl
Fire, Trouble
Restoral from alarm, fire detection
device.
Trouble condition on fire detection
device.
Restoral from trouble, fire detection
device.
Installer passcode entered. Installer
Mode accessed.
Fire, Trbl, Rstl
Instl Mode,
Start
Instl Mode,
End
Frc, All,
-Dly,
Installer Mode exited.
RAM IV
61
62
Frc, All,
-Dly, Usr
Frc, Prt,
+Dly, Skd
System forced All On with no delay 84
(instant) by user.
Log Overflow
Panel log overflow condition.
Oldest events being overwritten.
System forced Part On with
exit/entry delay by sked.
85
Log Threshold Panel log reached threshold.
Contact your security company.
34
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Control Panel Event Descriptions
.
Table 8: Control Panel Event Descriptions (continued)
Event #
Event
Description
Event #
Event
Description
86
AllCom Low
Signl
Low signal strength detected on
alternate communication device.
110
Output Set,
Skd
Relay set by sked.
87
88
Missing,
Alarm
Point assigned to point expander
(wired or RF) not responding to
control panel status poll while
system is armed.
Point assigned to point expander
(wired or RF) not responding to
control panel status poll while
system is armed.
111
112
Output Set,
RAM IV
Relay set by RAM IV.
Missing,
Trouble
Rstrl, Tamper
Restoral from alarm, Tamper point
type.
89
90
91
92
93
94
95
96
97
98
99
100
Open, Skd
Opening by sked.
113
114
Rstrl,
Emergency
Rstrl, Panic
Restoral from alarm, Emergency
point type.
Restoral from alarm, Panic point
type.
Restoral from alarm, Invisible point
type.
Restoral from alarm, 24-hour burglary
point types.
Open, RAM
IV
Open, Usr
Opening by RAM IV.
Opening by user, by ID reported.
Opening by keyswitch.
115
116
117
Rstrl, Invisible
Rstrl,
24-hr Burg
Open, KS
Rstrl, Cntrl, Dly
Rstrl, Cntrl
Restoral from alarm, controlled point
types.
Open, Skd,
Alarm
Open, RAM
IV, Alarm
Open, Usr,
Alarm
Open, KS,
Alarm
Point
Opening
Params
Changed
Opening after alarm event by sked.
118
119
120
121
122
Restoral from alarm, controlled point
types.
Opening after alarm event by
RAM IV.
Opening after alarm event, ID
reported.
Opening after alarm event by
keyswitch.
Point opened by Independent
Point Control device.
Rcvr Jam
Jammed condition detected on
premises RF receiver.
Rcvr Jam Rstl
Jammed condition detected on
premises RF received cleared.
RF Battery
Low
RF Battery
Rstl
RF Tamper
Trbl
RF Tamper
Rstl
Low battery detected on premises
RF transmitter.
Low battery condition detected on
premises RF transmitter cleared.
Premises RF Transmitter Tamper
Trouble.
Premises RF Transmitter Tamper
Restoral.
Panel parameters changed.
Phone Line
Fail
Phone Line
Rstl
Phone the voltage less than 3 V for 123
40 sec.
After Phone Line Fail event, phone
line voltage detected at greater
than
124
3 V for 40 sec.
101
102
Bad Call to
RAM IV
RAM IV
Panel attempted to call RAM IV but 125
was unsuccessful.
SDI Missing
SDI device not responding to
polling.
SDI device declared as missing
now responding to polling.
RAM IV attempted to connect to
control panel but was
unsuccessful.
126
SDI Missing,
Rstl
Access Fail
103
RAM IV
Access OK
RAM IV successfully connected
and disconnected from control
panel.
127
SDI Tamper
Tamper open on SDI Device
Tamper.
104
105
106
107
Re-Boot,
Panel
Re-Boot SDI
Normal start-up or reset with
installer switch.
Unexpected reset (reboot) from
SDI device.
128
129
130
131
SDI Tamper,
Rstl
SDI Trouble
SDI Device Tamper restored.
Trouble detected on SDI device.
Output Reset, Relay reset by user.
Usr
Output Reset, Relay reset by sked.
Skd
SDI Trouble,
Rstl
SDI Over
Current
SDI (option bus) device trouble
condition cleared.
Over current condition detected on
SDI device.
Bosch Security Systems | 9/04 | 46841E
35
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Control Panel Event Descriptions
Table 8: Control Panel Event Descriptions (continued)
Event #
Event
Description
Event #
Event
Description
108
Output Reset, Relay reset by RAM IV.
RAM IV
132
SDI OverCur,
Rstl
Over current condition on SDI
device restored.
109
134
135
Output Set,
Usr
Relay set by user.
133
155
156
Sensor Mon
Trbl
Sensor trouble detected.
Sensor Mon
Rstl
Sensor trouble condition restored.
User pressed Cmd 47.
User Code
Delete
User Code deleted.
Sensor Reset
User Code
Tamper
Invalid User Codes entered at
keypad exceeded User Tamper
retry count.
136
System
Inactive
System was not armed in inactive
interval. Cmd 47 or arming system
resets this trouble.
157
User Level
Set
User Level set.
137
138
139
Test, OK
No system troubles at automatic
test report time.
System trouble present at test
time.
Trouble condition on Tamper or
Voice Active detection device(s).
158
159
160
Walk Test
Start
Walk Test
End
Walk Test started with Cmd 44.
Test, Off-
normal
Trbl, Tamper
Walk Test ended by user or timed
out.
Trouble condition detected on
Programmable Output 2
configured as supervised siren
output.
Siren Trouble
140
141
Trbl,
Emergency
Trbl, Panic
Trouble condition o Emergency
detection device(s).
Trouble condition on Panic
detection device(s).
161
162
Siren Restoral Trouble condition on supervised
siren output cleared.
Grnd Fault
Ground fault detected on control
panel is sensor loops, SDI bus, or
Aux power outputs.
142
143
Trbl, Invisible
Trouble condition on Invisible
detection device(s).
Trouble condition on Burglary or
Independent Point Control
detection device(s).
163
164
Grnd Fault,
Rstl
First Open
Ground fault condition cleared.
Trbl,
24-hr. Burg
Panel is configured for multiple
area functions: first to open, last to
close. Last area has closed.
144
145
146
147
Trbl, Cntrl, Dly Trouble condition on Delay
detection device(s).
165
166
167
168
Last Close
Panel is configured for multiple
area functions: first to open, last to
close. Last area has closed.
Trouble detected on alternate
communication network.
Trbl, Cntrl
Trouble condition on Keyswitch
Follower and Instant detection
device(s).
AltComm
Cond
Rstrl, Trbl,
Tmpr
Restoral from trouble condition on
Tamper or Voice Active detection
device(s).
AltComm Fail
AltComm Rstl
Network failure detected on
alternate communication network.
Rstrl, Trbl,
Emerg
Restoral from trouble condition on
Emergency detection device(s).
Network communications resumed
on alternate communications
network.
148
149
150
Rstrl, Trbl,
Panic
Rstrl, Trbl,
Invis
Restoral from trouble condition on
Panic detection device(s).
Restoral from trouble condition on
Invisible detection device(s).
169
170
171
Reserved
Reserved
Reserved
Rstrl, Trbl, 24- Restoral form trouble condition on
hr.
Burglary Independent Point
Control detection device(s).
151
152
Rstrl, Trbl, Dly Restoral form trouble condition on
Delay detection device(s).
172
173
Reserved
Rstrl, Trbl,
Cntrl
Restoral from trouble condition on
Keyswitch, Follower, and Instant
detection device(s).
Rstrl, Swinger Restoral from Swinger Bypass.
36
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Control Panel Event Descriptions
.
Table 8: Control Panel Event Descriptions (continued)
Event #
Event
Description
Event #
Event
Description
153
User Code
Area Set
User Code “added” by assigning
area.
173
Rstrl, Swinger Restoral from Swinger Bypass.
154
175
User Code
Change
Rstrl, Alarm,
Miss
User Code changed.
174
Rstrl, Fire,
Miss
UnBypass,
24-hr.,
Restoral from Fire Missing. Local
event, no report.
Bypass on 24-hr detection
device(s) cleared using RAM IV
(unbypass).
Restoral from Missing. Local event, 180
no report.
RAM IV
176
177
Rstrl, Trble,
Miss
Rstl, Low
Signl
Local event. No report.
181
182
RF Battery
Low
RF Battery
Rstl
Low battery condition on RF
keyfob.
Low battery condition on RF keyfob
cleared.
Restoral from alternate
communication low signal strength
event.
178
179
UnBypass,
Fire,
RAM IV
UnBypass,
Ctrl,
RAM IV
Bypass on Fire detection device(s)
cleared using RAM IV (unbypass).
183
184
Default PINS
Installer or User PINs are not
changed from default. Local event
only.
Installer or User default PINs are
changed. Local event only.
Bypass on Controlled detection
devices(s) cleared using RAM IV
(unbypass).
Default PINS
Rstl
Bosch Security Systems | 9/04 | 46841E
37
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Security System Limitations
Security System Limitations
Fire Safety and Evacuation
Not even the most advanced security system can
guarantee protection against burglary, fire, or
environmental threats. All security systems are subject
to possible compromise or failure-to-warn for a variety
of reasons including, but not limited to:
Residential fire is a leading cause of accidental death.
Most fire related deaths occur at night when occupants
suffocate in their sleep from smoke and toxic gases,
rather than from burns. To help reduce this risk, the
following program should be implemented.
1. Minimize fire hazards. Smoking in bed, cleaning
with flammable liquids such as gasoline, leaving
children home alone, and using unsafe holiday
decorations are some of the common causes of
household fire.
2. Install a fire alarm system. The primary purpose of
this system is to protect lives by giving the earliest
possible warning of danger.
3. A smoke detector should be provided to protect
each sleeping area in a home.
4. Practice an escape plan. Because there may be
very little time between detection of a fire and the
time it becomes deadly, it is important that every
family member understands how to quickly
evacuate according to the plan.
5. Plan both primary and alternate escape routes.
Since stairwells and hallways may be blocked
during a fire, exiting through a bedroom window
must be a part of the escape plan. If the sleeping
area is above the ground floor, install a means of
safely descending outside the building if one does
not already exist.
6. As a part of this plan, all family members should
arrange to meet at a location away from the house
(such as a neighbor’s house) so you will know that
everyone is accounted for.
•
If sirens or horns are placed outside the hearing
range of people in remote areas of the building or
in areas that are frequently closed off, they do not
provide the intended protection.
If intruders gain access through unprotected points
of entry, the system does not detect their entrance.
If intruders have the technical means of bypassing,
jamming, or disconnecting all or part of the system,
they are not be detected.
•
•
•
•
If the AC power supply is OFF and the back up
battery is either missing or dead, sensors do not
detect intrusion.
Smoke detectors cannot detect smoke in chimneys,
walls, or roofs, or smoke blocked by a closed door.
They may not detect smoke or fire on a level of the
building different from the one on which they are
located. Smoke detectors may not be able to warn
in time about fires started by explosions, improper
storage of flammables, overloaded electrical
circuits, or other types of hazardous conditions.
If phone lines are out of service, reports from the
security system to the security company cannot be
sent. Telephone lines are vulnerable to
•
compromise by several means.
Inadequate maintenance and failure to test are the most
common causes of alarm failure. It is strongly
7. If it is determined that the alarm was accidentally
sounded, the bell should be silenced, the detectors
reset, and your security company notified
immediately that there is no emergency situation.
recommended that you test your system once a week to
be sure that all system components are working
properly. Although having a security system may make
you eligible for reduced insurance premiums, the
system is no substitute for insurance. Warning devices
cannot compensate you for loss of life or property.
38
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Fire Safety and Evacuation
.
Figure 8: Smoke Detector locations
3
1
7
1
1
*
2
6
2
1
*
*
*
3
4
*
5
1
1 - Bedroom
2 - Hall
3 - Living room
4 - Dining room
5 - Basement
6 - Recreation room
7 - Kitchen
* - Smoke detector
A smoke detector should be located on each story including basements, but excluding crawl spaces
and unfinished attics. Locate smoke detectors between sleeping areas and family living areas.
Bosch Security Systems | 9/04 | 46841E
39
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Maintenance and Service
Maintenance and Service
This security system requires very little maintenance;
however, you should test the system weekly to ensure it
is working properly. A test schedule and maintenance
program can be arranged. If you notice a change in
operation during normal use or testing, call for service
as soon as possible. Do not attempt to repair the
control panel, keypads, or detectors yourself.
Refer to Figure 1 on page 2 for security company,
contact, and installation information.
Power Failure
If the keypad indicates a power failure and you have
power in the rest of your premises, there may be a
problem with the electrical transformer or circuit
breaker supplying power to your security control panel.
First, check to be sure that the transformer is securely
plugged into the electrical outlet. If it appears to be
damaged in any way, do not attempt to repair it. Call
your security company for service.
Refer to Figure 1 on page 2 for transformer information.
If the transformer is plugged in, check the circuit
breaker supplying power to the outlet. If the breaker is
tripped, check the appliances on the circuit for signs of
electrical problems. Make sure someone has not
intentionally turned the breaker off. When all is clear,
reset the breaker.
Refer to Figure 1 on page 2 for the circuit breaker
number.
How to clean the keypad
If your keypad gets dirty, apply a household glass
cleaner to a clean cloth or paper towel and wipe the
surface. Do not spray any liquid directly onto the
keypad. It could run inside the case and damage
electrical circuits.
40
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Glossary
.
Glossary
24-Hour Point: Points that are always on even when
the system is turned off. There are two types of 24-hour
Points: Fire Points and Non-Fire Points.
Part 2 On: User-defined subset of the controlled points.
Part 2 On with No Delay (Instant) is an option. No Exit or
Entry Delay is provided with No Delay option.
Point: Detection device or group of devices connected to
your security system.
All On: All controlled points are armed. All On with No
Delay (Instant) is an option. No Exit or Entry Delay is
provided with the No Delay option.
RAM IV: Remote Account Manager IV; a Windows® –
based account management and control panel
programming utility designed to remotely set up and
program specific control panels.
Burglary Alarm Tone: Constant warble tone.
Central Station: Facility where trained personnel
monitor a security system 24 hours a day. The security
system may be programmed to contact the central station
during alarm conditions, enabling central station
personnel to dispatch the proper authorities.
Restoral Report: Signal transmitted upon the removal of
a trouble or alarm condition from an alarm circuit.
SDI: Serial Device Interface.
Controlled Point: Point that responds to alarm
conditions depending upon whether the system is turned
on or off.
Sked: Scheduling parameter that allows a selected event
to happen at a specific time.
Trouble: Service condition that needs to be corrected,
such as a broken wire.
Entry Delay: Programmed delay of the system alarm
responses that allows a person to enter the building
through the entry door to turn the system off. An alarm
response begins if the area is not disarmed before Entry
Delay expires.
Trouble Tone: Repeating warble tone that is on briefly,
followed by a pause, and then followed by the warble
tone.
Warble Tone: Tone that is on for 1 sec., then briefly off.
Error Tone: Same warble tone as Trouble Tone, but not
repeated.
Exit Delay: Programmed delay of the system alarm
responses that allow a person to exit the area before the
system turns on. An alarm response begins if a point is
faulted after Exit Delay expires.
Faulted Point: Point that is not normal, such as an open
door or window.
Fire Alarm Tone: Warble tone that is on for 1 sec. and
then briefly off (repeatedly).
Force Arming: Method of overriding the safety feature
that prevents arming with a faulted circuit on a control
panel.
Instant Alarm: Point type that initiates an alarm
immediately when faulted. This point type does not follow
any Entry/Exit Delay time.
No Delay: Turning the system on without Entry or Exit
Delay.
Non-Fire Point: Type of 24-hour point that is always on
and cannot be turned off.
Off: Controlled points that are not armed (system is off).
Off Display: Display that appears when the system is
turned off and no keys are pressed (normal display).
On: System is turned on (armed). Controlled points are
armed and begin an alarm response if faulted.
Part On: Installer-defined subset of the controlled points.
Part On with No Delay (Instant) is an option. No Exit or
Entry Delay is provided with the No Delay option.
Bosch Security Systems | 9/04 | 46841E
41
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Index
Index
System Trouble ................................................................20
Command
2
1 - Turn System All On...................................................10
2 - Turn System Part On.................................................11
3 - Turn System Part 2 On..............................................12
4 - Check System Troubles.............................................20
40 - View Alarm Memory...............................................21
41 - System Test...............................................................22
42 - View System Trouble ..............................................21
43 - Remote Program ......................................................28
44 - Walk Test..................................................................23
45 - Date and Time..........................................................16
47 - Reset System.............................................................23
48 - View Point Trouble..................................................22
49 - Keypad Adjust..........................................................10
50 - Move to Area............................................................29
51 - Extend Auto On Time.............................................24
52 - Change Skeds ...........................................................25
53 - Renew One-time Passcode......................................20
54 - Change Outputs .......................................................28
55 - Change Passcode......................................................16
56 - (Select 1) Change Others’ Passcodes......................17
56 - (Select 2) Change Others’ Passcode Authority
Levels............................................................................17
56 - (Select 3) Add a Passcode........................................18
58 - Delete Passcode........................................................19
61 - Turn Watch On/Off.................................................23
62 - Select Watch Tone...................................................24
63 - Select Watch Points..................................................24
65 - Set Part 2 Points........................................................12
80 - All Areas On.............................................................28
81 - All Areas Off.............................................................28
82 - Auto-Forward On/Off .............................................30
83 - Auto-Forward On Setup..........................................29
84 - Auto-Forward Off Setup..........................................30
85 - View Log...................................................................31
Commands..............................................................................8
Control Panel
24-Hour Point......................................................................... 6
Fire...................................................................................... 6
Non Fire ............................................................................. 6
A
Add a Passcode.................................................................... 18
Alarm Memory
View.................................................................................. 21
Alarms
Burglary.............................................................................. 8
Fire...................................................................................... 8
Reporting............................................................................ 8
Silence................................................................................. 9
All Areas Off ........................................................................ 28
All Areas On ........................................................................ 28
All Day Skeds....................................................................... 25
All On Skeds........................................................................ 25
Area
Move to ............................................................................ 29
Areas
All Off............................................................................... 28
All On............................................................................... 28
Arming
Area 1
Remotely with telephone ........................................... 31
Authority Levels
Others’ Passcode
Change......................................................................... 17
Auto On Time
Extend .............................................................................. 24
Auto-Forward
Off Setup .......................................................................... 30
On Setup .......................................................................... 29
On/Off.............................................................................. 30
Event Descriptions...........................................................33
Controlled Point.....................................................................6
B
Basic Pager Reports............................................................. 32
Burglary Alarm ...................................................................... 8
Keypad Tone ..................................................................... 7
Bypass Points........................................................................ 15
D
Date........................................................................................16
Delay Silent...........................................................................13
Delete Passcode....................................................................19
Descriptions
C
Control Panel Events.......................................................33
Change
Others’ Passcode.............................................................. 17
Authority Levels.......................................................... 17
Outputs............................................................................. 28
Passcode ........................................................................... 16
Skeds................................................................................. 25
Check
E
Entry Delay
Keypad Tone......................................................................7
Error
Keypad Tone......................................................................7
Evacuation.............................................................................38
System Status ..................................................................... 9
42
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Index
.
Event Descriptions
Limitations
Security System................................................................38
Log
Control Panel................................................................... 33
Exit Delay
Keypad Tone ..................................................................... 7
View..................................................................................31
Log Out of the System...........................................................9
F
M
Failure
Power................................................................................ 40
Faulted Point .......................................................................... 6
View.................................................................................. 15
Fire Alarm
Keypad Tone ..................................................................... 7
Fire Alarms............................................................................. 8
Fire Point ................................................................................ 6
Fire Safety and Evacuation ................................................. 38
Fire Trouble Events............................................................... 8
Force Arm............................................................................. 14
Maintence..............................................................................40
Move to Area........................................................................29
N
No Delay
Turn System On with......................................................12
Non Fire
24-Hour Point.....................................................................6
Trouble Events...................................................................8
H
O
How to clean the keypad.................................................... 40
Off Skeds...............................................................................27
OK
Keypad Tone......................................................................7
Output
I
information
Off Skeds ..........................................................................27
On Skeds...........................................................................27
Outputs
security system
circuit breaker number................................................. 2
telephone
Change..............................................................................28
jack location................................................................ 2
number........................................................................ 2
call to test ............................................................... 2
transformer location...................................................... 2
P
Pager Reports
Basic ..................................................................................32
Part 2
K
On Skeds...........................................................................26
Points
Key Press
Keypad Tone ..................................................................... 7
Keypad
Set..................................................................................12
Turn System On...............................................................12
Part On
Skeds .................................................................................25
Passcode
Add....................................................................................18
Change..............................................................................16
Change Other’s................................................................17
Authority Levels ..........................................................17
Delete................................................................................19
Renew One-Time ............................................................20
Point
Adjust (Cmd 49) .............................................................. 10
Cleaning
How to ......................................................................... 40
Commands......................................................................... 8
LED Descriptions.............................................................. 8
Tones .................................................................................. 7
Burglary Alarm.............................................................. 7
Entry Delay.................................................................... 7
Error............................................................................... 7
Exit Delay...................................................................... 7
Fire Alarm...................................................................... 7
Key Press........................................................................ 7
OK.................................................................................. 7
Trouble........................................................................... 7
Watch............................................................................. 7
Keys......................................................................................... 7
24-Hour...............................................................................6
Fire..................................................................................6
Non-Fire .........................................................................6
Controlled...........................................................................6
Faulted.................................................................................6
View..............................................................................15
Part 2
Set..................................................................................12
View Trouble ...................................................................22
Points
Bypass ...............................................................................15
Power
L
LED
Descriptions
Keypad........................................................................... 8
Bosch Security Systems | 9/04 | 46841E
43
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide | Index
Failure............................................................................... 40
Program
T
Time.......................................................................................16
Tones
Remote ............................................................................. 28
Keypad................................................................................7
Burglary Alarm..............................................................7
Entry Delay....................................................................7
Error................................................................................7
Exit Delay.......................................................................7
Fire Alarm......................................................................7
Key Press........................................................................7
OK ..................................................................................7
Trouble...........................................................................7
Watch..............................................................................7
Trouble
R
Remote Arming
Area 1
with telephone............................................................. 31
Remote Program.................................................................. 28
Renew One-Time Passcode................................................ 20
Reporting
Alarm.................................................................................. 8
Reset the System.................................................................. 23
Keypad Tone......................................................................7
Trouble Events
S
Fire.......................................................................................8
Non Fire..............................................................................8
Turn System Off...................................................................10
Turn System On
Safety
Fire.................................................................................... 38
Security System Limitations................................................ 38
Select
All......................................................................................10
No Delay...........................................................................12
No Exit Tone....................................................................13
Part ....................................................................................11
Part 2.................................................................................12
Points Faulted...................................................................14
Turn Watch On/Off.............................................................23
Watch
Points............................................................................ 24
Tone ............................................................................. 24
Service................................................................................... 40
Set Part 2 Points................................................................... 12
Silence Alarms ....................................................................... 9
Skeds
All Day ............................................................................. 25
All On............................................................................... 25
Change ............................................................................. 25
Off..................................................................................... 27
Output
Off................................................................................. 27
On................................................................................. 27
Part 2
V
View
Alarm Memory ................................................................21
Faulted Points...................................................................15
Log.....................................................................................31
Trouble
Point..............................................................................22
System...........................................................................21
On................................................................................. 26
Part On............................................................................. 25
Status
Check System .................................................................... 9
System
W
Walk Test..............................................................................23
Limitations........................................................................ 38
Log out of........................................................................... 9
Reset ................................................................................. 23
Test.................................................................................... 22
Trouble
Watch
Keypad Tone......................................................................7
Points
Select.............................................................................24
Tone
Select.............................................................................24
Turn On/Off.....................................................................23
Check ........................................................................... 20
View ............................................................................. 21
System Status
Check.................................................................................. 9
44
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide
.
Notes
Bosch Security Systems | 9/04 | 46841E
45
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide
Notes
46
Bosch Security Systems | 9/04 | 46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
D623 Series/D625 Series | User's Guide
.
Bosch Security Systems | 9/04 | 46841E
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Bosch Security Systems
130 Perinton Parkway
Fairport, NY 14450-9199
Customer Service: (800) 289-0096
Technical Support: (888) 886-6189
© 2004 Bosch Security Systems
46841E
Download from Www.Somanuals.com. All Manuals Search And Download.
|