INSTRUCTION MANUAL
LEG PRESS OPTION FOR GALENA STRENGTH
TRAINING SYSTEM
Questions?
As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or
find missing or damaged parts, we will guarantee your complete satisfaction through our authorized
dealer service centers or our home office customer service department. Please call your local dealer for
assistance or RSI at 800-990-5556 (9:00 AM - 5:00 PM). Our trained techanicians will provide immediate
assistance to you, free of charge.
We stand behind our products. Every piece, every part of this BODYCRAFT strength training system is
guranteed for as long as you own it. We will repair or replace anything that goes wrong.
Bodycraft is a division of Recreation Supply Inc.
P. O. Box 181
Sunbury, OH 43074
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
NO DESCRIPTION
QTY
201
202
203
204
205
206
207
208
CONNECT TUBE
MAIN FRAME
FRONT STABILIZER
LEG PRESS SUPPORT
SLIDING TUBE
FOOT REST
1
1
1
1
1
1
1
1
(201)
(203)
(204)
(206)
HANDLE BAR
AXLE
(202)
(207)
(205)
(208)
NO DESCRIPTION
QTY
211
212
213
214
215
216
217
218
219
220
221
222
223
RECT 45 X 75 END PLUG
6
1
2
1
2
2
2
1
1
5
2
2
1
50 SQ SPACER
50 END PLUG
45 END PLUG
RECT 1" X 2" END PLUG
3/4" BUSHING
3/8" BUSHING
RUBBER STOPPER
KNOB
PULLEY
HAND GRIP
NON-SLIP PAD
LEG PRESS CABLE
(211)
(212)
(216)
(213)
(217)
(214)
(215)
(219)
(218)
(222)
(220)
(221)
(223)
NO DESCRIPTION
QTY
231
232
233
234
235
236
237
238
239
240
241
1/2" X 3" HEX HEAD BOLT
6
1
1
4
1
3
2
12
17
8
3/8" X 3" HEX HEAD BOLT
3/8" X 2-3/4" HEX HEAD BOLT
3/8" X 1-3/4" HEX HEAD BOLT
3/8" X 1-1/2" HEX HEAD BOLT
3/8" X 1/2" HEX HEAD BOLT
1/2" WASHER(LARGER)
1/2" WASHER
3/8" WASHER
1/2" NYLON NUT
3/8" NYLON NUT
(231)
(233)
(232)
(234)
(236)
(235)
(239)
(237)
(240)
(238)
(241)
7
0 1/4 1/2 3/4 1"
1/2
2"
1/2
3"
(inch)
Download from Www.Somanuals.2com. All Manuals Search And Download.
ASSEMBLE LEG PRESS STATION
Remove the 50 MM END PLUG(32) from BASE FRAME(1).
Remove PEC DEC SEAT PAD(54) from PEC DEC SEAT(19).
Attach CONNECT TUBE(201) to BASE FRAME(1) using three 3/8" X 1/2" HEX HEAD BOLT(236)
and three 3/8" WASHER(239).
Attach MAIN FRAME(202) to CONNECT TUBE(201) using two 1/2" x 3" HEX HEAD BOLT, four 1/2"
WASHER(238) and two 1/2" NYLON NUT(240). Attach MAIN FRAME to PEC DEC SEAT(19) using
3/8" x 3" HEX HEAD BOLT(232), two 3/8" WASHER(239) and 3/8" NYLON NUT(241).
Attach FRONT STABILIZER(203) to MAIN FRAME(202) using two 1/2" x 3" HEX HEAD BOLT, four 1/2"
WASHER(238) and two 1/2" NYLON NUT(240).
Insert two 3/4" BUSHING(216) to MAIN FRAME(202), then attach LEG PRESS SUPPORT(204)
to MAIN FRAME(202) using AXLE(208), two 1/2" WASHER(237) and two 1/2"
NYLON NUT(240).
Attach FOOT REST(206) to SLIDING TUBE(205) using two 1/2" x 3" HEX HEAD
BOLT, four 1/2" WASHER(238) and two 1/2" NYLON NUT(240).
Then insert SLIDING TUBE(205) into LEG PRESS SUPPORT(204)
and lock with KNOB(219).
Reinstall PEC DEC SEAT PAD(54) as shown.
222
211
240
238
231
205
238
54
231
211
214
206
207
219
221
213
212
213
221
240
239
19 90
232
204
90
77
1
231
201238
239
236
231
215
218
220
238
240
211
240
237
234
239
32
202
211
208
240
203
237
240
238
211
238
231
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL LEG PRESS CABLE
If previously installed, completely remove AB CABLE(94a) by unscrewing HEX HEAD BOLT(80) as
shown(fig uA7).
Assemble LEG PRESS CABLE(223)(from leg press box) and pulleys simultaneously. Insert eyelet end
of LEG PRESS CABLE(223) into slot in front of PRESS UPRIGHT(3), over pulley A1, A2, down and
around pulley A3, up and around A4, down and around pulley A5, up and around A6, under pulley A7, under
and around pulley A8, down and around A9, down and around A10, down and around A11. Then insert the
eyelet end into the bracket of LEG PRESS SUPPORT(204) and fix using 3/8" x 1-1/2 HEX HEAD BOLT(235),
two 3/8" WASHER(239) and 3/8" NYLON NUT(241) as shown(fig A12).
(94a)
(223)
uA7
94a
T8
2
A1
A4
80
90
A2
A3
A12
A10
A8
90
87
A11
A9
L3
C2
A6
A7
A5
A4
A5
A3
A1, A2, A7
87
90
90
29
T8
49
49
68
87
87
90
80
87
82
1
27a
68
90
82
49
49
82
79
A8, A9, A10, A11
A12
C2
A6
241
220
204
240
A12
A10
A11
87
29
239
239
A9
A8
239
235
239
234
223
82
49
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly is complete! Please take the following steps before using the gym:
1. Make certain all bolts are tightened securely.
2. Make certain all cables are seated into all pulley grooves. A cable rubbing
against steel will peel the nylon coating, voiding warranty and resulting in
a need for replacement.
3. Pre-stretch the cables. Put the Weight Selector Pin(42) in the bottom hole on the
weight stack. Pull on the cables with great force, helping remove any kinks and
providing any initial cable stretch.
4. Be aware the cables can loosen and slightly stretch upon initial use.
5. The cables should be adjusted as tight as possible, but no so tight as to lift the
Top Plate(8) above the weight stack. Be certain to secure the jam nuts after
adjustments are made.
6. For better performance, apply a household lubricant (such as silicone) to
any adjustable areas and to the Guide Rods(5).
7. Enjoy many years of a Fit Lifestyle.
Thank you for purchasing the Bodycraft Galena Home Gym. If You
have any questions, please call your local BodyCraft dealer or call
our customer service department at 800-990-5556.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|