Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
GETTING STARTED ..................................................................................... 4
VEHICLE PLACEMENT............................................................................................. 4
HANDSFREE pairing: (Example)............................................................................... 9
Voice dialing............................................................................................................. 12
Redialing (Handsfree profile only)............................................................................ 13
Rejecting a call (Handsfree Profile only).................................................................. 13
Setting the Volume of the Mobile Phone.................................................................. 13
Specifications.............................................................................................. 70
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
VEHICLE PLACEMENT
The optimum place to position the Supertooth II in the vehicle is on the sun visor. The
Supertooth II sun visor clip is designed to be reversible to easily transfer the Handsfree
Kit in case you change the position of the sun visor.
Fix the metal clip of SuperTooth II to the sun visor.
Sun Visor
Fixing the Clip
Attach the magnetic back of SuperTooth II to the fixed metal clip. The Supertooth
II must be placed wherein its microphone is directed to the mouth of the user.
Sun Visor Up
Mic at 55º
The position of the Supertooth II can vary according to the position of the sun
visor. The Swivel Arm can be adjusted to 0º, 55º and 210º orientations.
Sun Visor Down
Mic at 210º
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CHARGING THE SUPERTOOTH II
SuperTooth II can be charged in a car using the SuperTooth II Car Charger or at home
using the Wall charger.
1. Connect the charger’s plug into the
Charger Input of SUPERTOOTH II.
Charge Indicator Status:
•
•
•
Red = Low battery
Steady Green = Fully charged
Alternate Red/Green = indicates charging
2. When fully charged, disconnect the charger.
Bluetooth Indicator Status:
•
Blinking Blue = standby (when Swivel Arm is open to 55º to 210º
positions).
TURNING ON/OFF THE SUPERTOOTH II
1. To turn SuperTooth II on, just flip up the Swivel Arm at 55º to 210º positions.
The Bluetooth indicator will glow (blue blink). This indicates that the kit is
ready (standby mode).
Note: Before using this car kit, the user must pair the SuperTooth II with
his phone (refer to PROCEDURE OF PAIRING TO THE MOBILE PHONE).
2. To turn SuperTooth II off, just flip down the Swivel Arm to 0º position. The
Bluetooth Indicator will become red then will turn off after a second.
ADDITIONAL ACCESSORIES go to www.blueant.com.au
1. Extra SunVisor clips
2. Wall Charger
3. Car Charger
4. Earpiece Headset
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BLUETOOTH PAIRING PROFILES
IMPORTANT NOTICE!!!
You must establish the correct Bluetooth Pairing
Mode for your mobile phone before connecting. If
your handset is not listed on the next page, look in
your phones manual to find the right Bluetooth
Profile to use.
Alternatively, call the Blueant Customer Support
information.
Note: Most newly released phones use the Bluetooth Handsfree Profile.
Does your phone use
HEADSET or HANDSFREE
Bluetooth Profile?
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPERTOOTH II COMPATIBILITY
Required Profile
Phone models
Headset
Hands free
BlackBerry 7100v / 7100g / 7290 / 7250
I-Mate PDA2K / PDA2K EV-DO / SP3 / SP3i
I-Mate Jam / Pocket Pc / Smartphone 2 /
HP IPAQ 6315 / 6365 / 6385
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
MOTOROLA A1000 / E1000 / A925 / A835 / E398 /
MPX220 / MPX / V3 / V80 / V600 / V620 / V525 / V535
Nokia 810 / 3230 / 3650 / 3660 / 6230 / 6255 / 6260 / 6260
/ 6310 / 6310i / 6600 / 6630 / 6650 / 6670 / 6820 / 7280 /
7600 / 7610 / 8910 / 8910i / 9300 / 9500 / N'GAGE
ꢀ
Nokia AD-5B Wireless Bluetooth Adapter 3100 / 3120 /
3200 / 3220 / 5100 / 5140 / 6100 / 6170 / 6220 / 6610 /
6610i, 6800 / 7200 / 7250 / 7250i / 7260 / 7270
ꢀ
ꢀ
O2 XDA 11s / Xphone 2
O2 XDA Mini / XDA 11 / Xphone
PalmOne Treo 650
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Panasonic X70 / X700 / P342i
Sagem MY X8
Samsung SGH D500
Sharp GX 15 / GX 25 / GX 30 / GX32
Siemens S55 / SX1 / S65 / SK65
Sony Ericsson K700i / S700i / T610 / T628 / T630 / Z600 /
Z1010
ꢀ
Sony Ericsson P800 / P900 / P910i / T39m / T68
Sony Ericsson T68i (Version R6 and below)
Sony Ericsson T68i (Version R7)
SPV C500
ꢀ
ꢀ
ꢀ
ꢀ
Qtek 2020
ꢀ
7
Download from Www.Somanuals.com. All Manuals Search And Download.
EXAMPLE PROCEDURE FOR
PAIRING TO A MOBILE PHONE
•
•
Pairing to your phone is not possible while charging the Supertooth.
First, refer to the Compatibility Table above for suggested pairing
modes to determine what pairing mode is best for your phone.
•
Pairing will create a link or connection between the two Bluetooth devices,
SuperTooth II and your phone.
•
•
This kit supports either Handsfree or Headset pairing.
The Handsfree and Headset pairing procedures are different.
•
When you are certain of what pairing mode to use, proceed with the
instructions on the following pages.
Please also see the index for each
individual phone on page 16.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDSFREE pairing: (Example)
1. Bring the mobile phone to about 20cm from SuperTooth II.
2.
The Supertooth II is initially off. Turn it on by
flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow
(blue blink).
3.
Simultaneously press the Reject Button and
the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and
the Bluetooth Indicator LED will change from
blinking blue to alternate blinking red and
blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
While the kit is in pairing mode, access the Bluetooth menu of your phone.
(Kindly refer to your phone’s manual.) Turn on its Bluetooth function then
execute a Bluetooth search so that it will be able to search and find your
Supertooth II. When the phone displays the list of the Bluetooth devices it has
found, select the name of this kit (Supertooth II).
5.
6.
When the phone asks for a passcode, enter “0000”.
Pairing is successful if the alternating red/blue lights of Bluetooth Indicator
will stop and then change to plain blinking blue. Normally, the phone would
also show briefly on its display if it’s already paired and connected to
SuperTooth II or if pairing has failed.
Note: If pairing has failed, repeat the procedure. If pairing has succeeded,
then your SuperTooth II kit is now ready to use. You can now make or
answer a call using your kit instead of your phone.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HEADSET Pairing: (Example)
1. Bring the mobile phone to about 20cm from the Supertooth II.
2.
SuperTooth II is initially off. Turn it on by flipping up
the Swivel Arm to 55º position. The Bluetooth
Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and Pick-
Up/Hang-Up Button for about 10seconds.
A
distinctive tone will be heard and The Bluetooth
indicator LED will change from blinking blue to
alternate blinking red and blue.
4.
Press the Pick-Up/Hang-Up Button again. Press
shortly (release immediately). Bluetooth indicator
blinking will be faster. The Supertooth II is now in
Headset Pairing Mode.
5.
While the kit is in pairing mode, access the Bluetooth menu of your phone.
(Kindly refer to your phone’s manual.) Turn on its Bluetooth function then
execute a Bluetooth search so that it will be able to search and find your
Supertooth II. When the phone displays the list of the Bluetooth devices it
found, select the name of this kit (Supertooth II).
6.
7.
When the phone asks for a passcode, enter “0000”.
Pairing is successful if the alternating red/blue lights of Bluetooth Indicator
will stop and then change to plain blinking blue. Normally, the phone would
also show briefly on its display if it’s already paired and connected to
SuperTooth II or if pairing with it failed.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If pairing has failed, repeat the procedure. If pairing succeeded, then your
SuperTooth II kit is now ready to use. You can now make or answer a
call using your kit instead of your phone.
Important Remarks:
•
On some versions of Nokia, Motorola, Sony Ericsson and Sharp phone software, the kit
will not connect automatically to the cell phone until you do One press on the Pick-
Up/Hang-Up Button of the Supertooth II to connect to the cell phone.
If disconnection problem are encountered on some Nokia cell phones, kindly turn off the
keypad tones of your cell phone.
•
MULTI-PAIRING
ꢁ
You can pair 2 devices to the Supertooth II (Multi-Pairing). That is, the
Supertooth II can remember connection information for two different
devices and will connect with either when requested depending on
which is in range and which was connected last.
ꢁ
ꢁ
When Pairing a second mobile phone, make sure the first is off or out of
range.
You will overwrite the first paired device by pairing a third device to the
Supertooth II. The pairing rule is… first in first out.
ꢁ
If you cannot connect to a previously paired and connected phone, go to
the Bluetooth menu in the phone and select the Supertooth II and Press
Connect.. Some phones may require this if it is the second phone used.
You do not have to repair the devices just manually connect..
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING/RECEIVING CALLS
ANSWERING A CALL
When the phone receives a call, a ring tone is heard on SuperTooth II and at the
same time on the telephone (depending on your phone model).
1. Shortly press the Pick-Up/Hang-Up Button to answer the call.
2. When communication is over, press the Pick-Up/Hang-Up Button to
terminate the call.
MAKING A CALL USING THE SUPERTOOTH II
Normal dialing
1. Enter the contact number and press send on the phone. Normally, audio
will be on the kit.
Note: With some phones like Siemens S55; Panasonic X70, audio is
always on the phone during an outgoing call. You will need to
press Pick-Up/Hang-Up Button to transfer the audio to your kit.
2. When communication is over, press the Pick-Up/Hang-Up Button to
terminate the call.
Voice dialing
1. First, you have to access the voice dialing function of your phone, turn it
on and record for a voice name or voice tag. (Kindly refer to this
procedure in your phone’s manual.)
Note: Voice dialing entries must be stored in the phone’s memory,
not on the SIM card!
When done, execute voice dialing on your kit by proceeding with these
instructions.
2. Shortly press Pick-Up/Hang-Up Button.
3. A beep will then be heard on the Supertooth II prompting the user to say
a voice name or voice tag of a person to call.
4. Say the name. The name will be played back to you (audio on kit). The
phone will then place the call automatically.
5. When communication is over, press the Pick-Up/Hang-Up Button to
terminate the call.
Note: Voice Recognition and Car Kit performance is dependent on microphone
positioning. Noisy environments can also affect voice recognition.
Record your voice commands in a quiet environment.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Redialing (Handsfree profile only)
Make a long press on the Pick-Up/Hang-Up Button. Audio will be on the
Supertooth II.
Audio Transfer
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
For Nokia Phones:
Flip up the Swivel Arm from 0º to 55º or 210º positions. This will automatically
transfer the audio from phone to kit.
For Other Phone Models:
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
shortly press the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
Note: for some phones in Headset mode, Kit to Phone transfer must be done from
the phones menu.
Rejecting a call (Handsfree Profile only)
Press Reject Button to reject an incoming call.
Note : For Headset profile, Call Reject must be done from the phone.
Setting the Volume of the Supertooth II
Set the volume using the Volume Control.
1. Turn it clockwise to increase the volume.
2. Turn it counterclockwise to decrease.
Note: If the volume knob on the Supertooth II is too high, it can cause feedback
(Whistling sound), echo, or background noise during calls on some cell
phones.
Setting the Volume of the Mobile Phone
Volume levels on most phones are set automatically to optimum levels when
you connect your Supertooth II.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VOLUME LEVELS – Finding The Right Balance
1) The Supertooth II has a very powerful speaker that is designed to boost low level
voice signals if required. Use the Volume Control Knob to turn down levels if too much
signal is present and distortion or echo occurs. The Supertooth II sounds best when it is
loud enough to cut through to be heard without becoming too loud and distorting.
2) In your phone, set up a Sounds Profile with lower ringing volumes and keypad
tones and activate when using with Supertooth II. Some phones can automatically
activate a desired profile when connecting to Car Kit and Headset Accessories (see
your phone’s user manual for instructions on using and activating Profiles).
3) Altering the position of the SuperTooth II so that the microphone is directly in front of
your mouth increases the microphone signal level.
ADDITIONAL INFORMATION
Phone Profiles (different to Bluetooth Profiles)
In your phone, set up a Sounds Profile with appropriate ringing volumes and keypad
tones and activate when using with the Supertooth II. Some phones can automatically
activate a desired profile when connecting to Car Kit or Headset Accessory (see your
phone’s user manual for instructions on using and activating Phone Profiles). Typical
phone Profiles are General, Outdoor, Meeting, Silent.
Phone Software
Please make sure you have the latest firmware upgrade for your Phone especially if
you are using a PDA Phone. Go to the support section of the relevant site to check you
have the latest version. Many new pda phones require a Bluetooth patch to improve
Bluetooth functionality from the original version.
Resetting Your Phone
As new phones become more like computers they become prone to software and
memory issues which may cause bluetooth reconnection problems. This can be fixed
simply by turning the phone off and back on again. The phone will be reset and the
working memory cleared.
Leaving your phone on continually for weeks at a time can cause this to happen so we
recommend you switch your phone off at least once a fortnight to avoid any problems.
lf you experience this problem regularly call your phone's manufacturer for a software
upgrade at a service center. You may be able to do this online.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUALS FOR INDIVIDUAL MOBILE
If your phone does not appear below, please use a manual for a similar
phone or use the Example Pairing procedure above. Also check the website
for newly updated models and also for older outdated models.
PHONES
02 XPHONE.................................................................................................. 49
PALM TREO 650.......................................................................................... 51
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BLACKBERRY 7100v / 7100g / 7290 / 7250
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You may need to
register your device to download updates.
For Blackberry go to www.blackberry.com
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your device to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Using the Jog wheel, scroll to Options, Press the Jog wheel button.
2.
3.
Scroll to Bluetooth, Press Jog. Press Jog again and again to select Enable Bluetooth
Press Jog and select Close
PAIRING TO THE CELLULAR PHONE (not possible while charging)
1.
2.
Bring your Phone to within about 20 cm from the Supertooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
5.
6.
Using the Jog wheel, scroll to Options, Press the Jog wheel button.
Select Bluetooth
Press Jog, Select Add Device
Your device now searches for Bluetooth devices and displays them in the list.
Select the name of the device Supertooth, and then press Jog.
Enter “0000” as the PassKey and then press Jog.
7.
8.
9.
Make sure Supertooth is selected and press Jog. Scroll to Device Properties. Press Jog.
10. Scroll to Trusted, press Jog, select Change Option, scroll to Yes and press Jog.
11. Press Jog again and select Save.
12. Now Press Jog again and select Connect.
13. Tap ok, and then 9 to exit.
The Supertooth is paired with your Phone. An enabled Bluetooth icon will be seen on screen
indicating that the Supertooth is linked with the Phone..
c.
d.
RECONNECTING TO THE SUPERTOOTH
After turning the Supertooth off, or going out of range, to reconnect just press the Pick-
Up/Hang-Up button on the Supertooth Once.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Supertooth.
1.
When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up
once), audio will be heard on it.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth). But if you wish to hear and transfer the audio to the
Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth.
To terminate the call, press down the Pick-Up/Hang-Up Button.
e.
MAKING A CALL with the Supertooth on
Normal dialing
With your Device you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Press a keypad to bring up the dialer screen.
2.
Press the number on the keypad, and then press the green call key.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
Redial
Calls the last number dialed from the phone.
1. Press and hold the Pick-Up/Hang-Up key on the Supertooth for 3 seconds.
f.
AUDIO TRANSFER DURING A CALL
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.”
Audio Transfer back to the Supertooth is done by pressing the Jog wheel and selecting
Activate Supertooth
g.
h.
REJECTING A CALL
Rejecting a call can be done by selecting IGNORE on the phone or pressing the
Reject button on the Supertooth II.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
3.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Volume can also be adjusted using the phone’s volume control.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
IMATE POCKET PC / JAM
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You will need to
register your device to download updates.
For Imate go to www.clubimate.com
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your Imate to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Tap . Scroll down to Settings. Tap Connections. Tap Bluetooth.
2.
Select On and tap ok.
3. Tap 9 to exit.
PAIRING TO THE CELLULAR PHONE
1.
2.
Bring your Imate to within about 20 cm from the Handsfree Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
4.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
Press the Pick-Up/Hang-Up Button once again for a short time to access Headset
Pairing Mode. The Supertooth is now in the correct pairing mode for the Imate .
(most important)
5.
6.
Tap . Scroll down to Settings. Tap Connections tab. Tap Bluetooth.
Tap Bonded Devices tab. Tap New.
Your device now searches for Bluetooth devices and displays them in the list.
Tap the name of the device that you want to bond with your PC phone, and then tap
Next.
7.
8.
9.
Enter “0000” as the Device PIN and then tap Next.
Tap Finish. (Note: In Name, you may or may not edit the name of your bonded device).
10. For the question, “This Bluetooth device supports headset profile, would you like to set it
as your Blue tooth headset?”, tap Yes.
11. Tap ok, and then 9 to exit.
The Handsfree Kit is paired with your Imate. An enabled Bluetooth icon will be seen on screen
indicating that the Handsfree Kit is linked with the Imate.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Handsfree Kit.
1.
When answering is done on the Handsfree Kit (that is, pressing Send once), audio will
be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone (not on
the Handsfree Kit). But if you wish to hear and transfer the audio to the Handsfree Kit,
just press the Send button once on the Supertooth.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL with the Handsfree Kit on
Normal dialing
With your Imate you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Press button to bring up the dialer screen.
2.
Tap the number on the keypad, and then tap Talk key.
Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing,
audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the
case you have to press once on the Send Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer back to the Imate can be done by accessing the phone’s
Bluetooth Headset
icon.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button.
f.
REJECTING A CALL
Rejecting a call must be done by selecting IGNORE on the phone or by pressing the Reject
Button on the Supertooth II
g.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
Useful Information for Imate Pocket Pc
After pairing the Supertooth please make sure headphones are enabled on your Imate.
Tap Start....Settings... Today....Items and tick Profile. (make sure profile is ticked).
This creates a link so you can enable or disable the Supertooth. You will see a small headphone
symbol on the main screen allowing you to connect or disconnect from the Supertooth quickly...
Note: The Imate Pocket Pc can only use one audio device, set as the default.
To use a second paired device with this phone, rename it and set it as the default.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
IMATE PDA2k / PDA2K EV-DO
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You will need to
register your device to download updates.
For Imate go to www.clubimate.com
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your device to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Tap the Bluetooth icon in the bottom right of your today screen.
2.
Tap Turn Bluetooth ON
b.
PAIRING TO THE CELLULAR PHONE (cannot pair while charging)
1.
2.
Bring your Phone to within about 20 cm from the Supertooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
3.
4.
5.
6.
7.
Tap the Bluetooth icon in the bottom right of your today screen.
Tap Bluetooth Manager
Tap New.
Tap Handsfree/Headset Setup…Tap Next
Your device now searches for Bluetooth devices and displays them in the list.
Select display ‘All Devices’
Tap the name of the device, Supertooth, and then tap Next.
8.
9.
10. Enter “0000” as the Device PIN and then tap OK.
11. Tap Finish.
12. For the question, “Do you want to set this device as the default Handsfree device”, tap
Yes.
13. Tap ok, and then 9 to exit.
The Supertooth is now paired with your Phone. An icon will be seen on screen indicating that
the Supertooth is linked with the Phone..
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Supertooth.
1.
When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up
once), audio will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth). But if you wish to hear and transfer the audio to the
Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth.
To terminate the call, press down the Pick-Up/Hang-Up Button.
3.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL with the Supertooth on
Normal dialing
With your Device you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Press button to bring up the dialer screen.
2.
Tap the number on the keypad, and then tap Talk key on your phone.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
Redial
Calls the last number previously dialed from the phone.
Redialing must be done while in the Today screen.
1.
Press and hold the Pick-Up/Hang-Up button on the Supertooth for 3 seconds.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer back to the Phone can be done by accessing the phone’s
Bluetooth Headset ꢀ icon at the top of the screen.
2. Audio Transfer to the Supertooth is done by…
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.”
f.
REJECTING A CALL
Rejecting a call can be done by selecting IGNORE on the phone or pressing the
Reject button on the Supertooth.
g.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
3.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Volume can also be adjusted using the phone’s volume control.
h.
RECONNECTING
The latest Rom from I-mate does not support auto reconnect. To reconnect after turning the
Supertooth back on or coming into range…
1.
Press the Pick-Up/Hang-Up button on the supertooth. Wait for the connection to happen.
Then press Pick-Up/Hang-Up . OR
2.
Go to the Bluetooth Manager Tap and Hold the Supertooth, select connect.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
IMATE SP3/SP3i
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You will need to
register your device to download updates.
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Select Start . Select Settings. Select Bluetooth. Select Bluetooth
2. Select On and tap ok.
PAIRING TO THE CELLULAR PHONE (not possible while charging)
1.
2.
Bring your phone to within about 20 cm from the Supertooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
5.
On your phone Select Start . Select Settings. Select Bluetooth. Select Bluetooth.
Select Menu…Select Devices… Select Menu…Select New.
Your phone now searches for Bluetooth devices and will display them in the list.
Scroll to the name of the device, Supertooth, and then press Select.
Enter “0000” as the PassKey and then tap Done.
6.
7.
8.
Enter a Display Name and Press Done. Note: In Name, you may or may not edit the
name of your bonded device).
9.
For the question, “Would you like to designate Supertooth as a handsfree device?”,
Select Yes.
The Supertooth is paired with your SP3. An enabled Bluetooth icon will be seen on screen
indicating that the Supertooth is linked.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Supertooth.
1.
When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up
once), audio will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth). But if you wish to hear and transfer the audio to the
Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth.
To terminate the call, press down the Pick-Up/Hang-Up Button.
3.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL
Normal dialing
With your Phone you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Tap the number on the phone’s keypad, and then press the Talk key on the
phone.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit.
2.
To terminate the call, press down the Pick-Up/Hang-Up Button on either device.
Voice Dialing
Set up voice commands for each contact as per the Phone’s user manual.
To activate voice dialing…
1. Press the Pick-Up/Hang-Up button once on the Supertooth
2. When prompted by a beep, say the name you wish to call.
Redial
Calls the last number dialed from the phone.
1. Press and hold for 3 seconds the Pick-Up/Hang-Up key on the Supertooth.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer to the phone during a call can be done by accessing the phone’s
Menu and selecting Turn Handsfree ON/OFF.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.”
f.
REJECTING A CALL
Rejecting a call can be done from the Phone by selecting IGNORE or from the Supertooth
by pressing the Reject button.
Note: It is recommended to create a phone profile to use with the Supertooth. Configure phone
volume and ring settings to suit your cars environment.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
I-MATE SMARTPHONE 2
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You will need to
register your device to download updates.
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your Smartphone2 to establish a Bluetooth
connection between your device and other Bluetooth devices.
1. Tap . Scroll down and Tap Settings. Tap Bluetooth.
2. Scroll to On and Tap Done.
PAIRING TO THE CELLULAR PHONE
1.
2.
Bring your Smartphone2 to within about 20 cm from the SuperTooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
Press the Pick-Up/Hang-Up Button again. Press shortly (release immediately).
Bluetooth indicator blinking will be faster. The Supertooth II is now in Headset
Pairing Mode.
5.
6.
Tap . Scroll down and Tap Settings. Tap Bluetooth and then Menu.
Tap Bonded Devices tab. Tap Menu and then New. (Smartphone2 will now search for
devices)
7.
8.
9.
Scroll to SuperTooth and select Add.
Enter “0000” as the Device PIN and then tap Done.
(Note: In Name, you may or may not edit the name of your bonded device).
10. For the question, “This Bluetooth device supports headset profile, would you like to set it
as your Bluetooth headset?”, tap Yes.
11. Tap ok, and then exit.
The Handsfree Kit is paired with your Smartphone2.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the SuperTooth.
1.
When answering is done on the SuperTooth (that is, pressing Pick-Up/Hang-Up once),
audio will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone (not on
the SuperTooth). But if you wish to hear and transfer the audio to the Handsfree Kit, just
press the Send button once on the SuperTooth.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL with the Handsfree Kit on
Normal dialing
With your Smartphone2 you can make a call using different methods. Please refer to
your PC Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Press button to bring up the dialer screen.
2.
Tap the number into the keypad, and then tap Talk key.
Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing,
audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the
case you have to press once on the Send Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer back to the Smartphone2 can be done by accessing the
phone’s Bluetooth Headset ꢀ icon.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.”
f.
REJECTING A CALL
Rejecting a call must be done by selecting IGNORE or pressing the Reject button on the
Smartphone2.
g.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
HP IPAQ 6315 / 6365 / 6385
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You may need to
register your device to download updates.
For Hp 6365 go to www.hp.com.au
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your device to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Tap the Bluetooth icon in the bottom right of your today screen.
2. Tap Turn Bluetooth ON
PAIRING TO THE CELLULAR PHONE (not possible while charging)
1.
2.
Bring your Phone to within about 20 cm from the Supertooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
3.
4.
5.
6.
7.
Tap the Bluetooth icon in the bottom right of your today screen.
Tap Bluetooth Manager
Tap New.
Tap Handsfree/Headset Setup…Tap Next
Your device now searches for Bluetooth devices and displays them in the list.
Select display ‘All Devices’
Tap the name of the device, Supertooth, and then tap Next.
8.
9.
10. Enter “0000” as the Device PIN and then tap OK.
11. Tap Finish.
12. For the question, “Do you want to set this device as the default Handsfree device”, tap
Yes.
13. Tap ok, and then 9 to exit.
The Supertooth is now paired with your Phone. An enabled Bluetooth icon will be seen on
screen indicating that the Supertooth is linked with the Phone..
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Supertooth.
1.
When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up
once), audio will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone not
on the Supertooth). But if you wish to hear and transfer the audio to the
Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth.
To terminate the call, press down the Pick-Up/Hang-Up Button.
3.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL with the Supertooth on
Normal dialing
With your Device you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
3.
Press button to bring up the dialer screen.
4.
Tap the number on the keypad, and then tap Talk key on the phone.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit.
5.
To terminate the call, press down the Pick-Up/Hang-Up Button.
Redial
Calls the last number dialed from the phone.
Redialing must be done while in the Today screen.
1. Press and hold the Pick-Up/Hang-Up key on the Supertooth for 3 seconds.
e.
AUDIO TRANSFER DURING A CALL
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.”
Audio Transfer back to the Phone can also be done by accessing the phone’s
Bluetooth Headset ꢀ icon at the top of the screen.
f.
REJECTING A CALL
Rejecting a call must be done by selecting IGNORE on the phone or pressing the
Reject button on the Supertooth.
g.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
3.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Volume can also be adjusted using the phone’s volume control.
h.
RECONNECTING
The latest Rom from HP does not support auto-reconnect on the Supertooth. To reconnect
after turning the Supertooth back on or coming into range…
1.
Press the Pick-Up/Hang-Up button on the supertooth. Wait for the connection to happen.
Then press Pick-Up/Hang-Up . OR
2.
Go to the Bluetooth Manager Tap and Hold the Supertooth, select Connect.
Note: If the volume is too high, it can cause feedback (whistling sound)
, echo or background noise during calls on some cell phones.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
MOTOROLA A1000 / A925 / A835
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1.
Tap Menu icon at top right of screen. Tap Control Panel, Tap Connections, Tap
Bluetooth. Tap Settings. For Operation Mode select Bluetooth On.
Tap Done.
2.
b.
PAIRING TO THE CELLULAR PHONE (not possible during charging)
1.
2.
Bring the cellular phone at about 20 cm from the Supertooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
3.
4.
Tap Menu icon at top right of screen. Tap Control Panel, Tap Connections, Tap
Bluetooth, Tap Devices
5.
6.
7.
Tap Add.
On the scan results, Tap the Supertooth device you want to bond with your cell phone.
Tap your keyboard, Enter Bluetooth passkey “0000” then Tap Done. If pairing is
successful Supertooth will be listed.
8.
9.
Tap the Supertooth to view options. Tick “Allowed to connect without confirmation”
Tap Done.
The Handsfree Kit is paired and ready to use.
c.
d.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Supertooth.
1.
2.
Just press once on the Pick-Up/Hang-Up Button to answer the call.
If you wish to answer the call on your cellular phone, just Tap Pick-Up/Hang-Up on the
phone.
3.
To terminate the call, press the Pick-Up/Hang-Up Button.
MAKING A CALL with the Handsfree Kit on
Normal dialing
1.
Enter the contact number and press SEND/ANS key. Audio can be heard on the
Handsfree Kit.
2.
To terminate a call, press the Pick-Up/Hang-Up Button.
Redialing
Pressing the Pick-Up/Hang-Up button on the Supertooth once will bring up call history,
and again will call the last number dialed.
e.
AUDIO TRANSFER
Kit to Phone
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer
the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.”
f.
REJECTING A CALL
Tap Busy on your phone.
g.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1. Turn it clockwise to increase the volume.
2. Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound),
echo or background noise during calls on some cell phones.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
MOTOROLA V3 / V80 / V525 / V535 / V600 / V620 / E398
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1.
Press Menu key featured as
or press on the center button of the 5-Way
NavigationKey featured as
to access Menu. Scroll to Settings, SELECT. Choose
Connection, SELECT. Bluetooth Link, SELECT.
Scroll to Setup, Select. Scrool to Power, Select. Choose ON
Continue pressing Back, to exit.
2.
3.
b.
PAIRING TO THE CELLULAR PHONE (not possible during charging)
1.
2.
Bring the cellular phone at about 20 cm from the Handsfree Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
4.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
Press Menu key
or press the center button of the 5-Way Navigation key
to
access Menu. Scroll to Settings, SELECT. Choose Connection, SELECT. Bluetooth
Link, SELECT.
5.
6.
7.
Choose Handsfree, SELECT. [Look for devices], SELECT. The phone will then scan the
device to be added.
On the scan results, choose the Supertooth, SELECT.
A question “Bond with … (device name)?” appears. Press YES.
Enter Bluetooth passkey “0000” then press ok. If pairing is successful, a remark
“Connected to…” appears. The phone exits automatically.
The Handsfree Kit is paired and ready to use.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit.
1.
2.
Just press once on the Pick-Up/Hang-Up Button to answer the call.
If you wish to answer the call on your cellular phone, just press the Menu key
of the phone. On the Call Menu, scroll down to Use Handset, SELECT. Audio will
be heard on the phone. Pressing back on the Pick-Up/Hang-Up Button of your
Supertooth will transfer the audio back to it.
3.
To terminate the call, press the Pick-Up/Hang-Up Button.
d.
MAKING A CALL with the Handsfree Kit on
Normal dialing
1.
2.
Enter the contact number and press SEND/ANS key. Audio can be heard on the
Supertooth.
To terminate a call, press the Pick-Up/Hang-Up Button.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice dialing
Refer to step h and i for the procedure when activating and recording for voice dialing.
1.
2.
Press the Pick-Up/Hang-Up Button once to activate the voice dialing.
A beep will then be heard on the Handsfree Kit prompting the user to say the name
of the person to call.
3.
4.
Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cell phone does not recognize the name spoken, the
steps above may be repeated.
Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
e.
AUDIO TRANSFER
Audio Transfer can be done by accessing the cell phone’s menu during ongoing calls.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the
audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
f.
REJECTING A CALL
Press the Reject Button to reject an incoming call.
g.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1. Turn it clockwise to increase the volume.
2. Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
h. ACTIVATING THE VOICE DIALING
Use your phone when recording for the voice dialing. Before voice dialing, you must first turn
on the Voice Dial function and record your voice. To turn voice dialing on:
1. Go to Menu by pressing the feature
SELECT.
. Scroll to Settings, SELECT. Scroll to Headset,
2. Choose Voice Dial, CHANGE. Choose ON, SELECT.
3. Continue pressing Back to exit.
i.
RECORDING FOR VOICE DIALING
Note: (Make sure the number is stored in Phone memory).
1. Press Menu key featured as
or press the center button on the
31
Download from Www.Somanuals.com. All Manuals Search And Download.
5-Way Navigation Key featured as
to access Menu. Scroll to Phonebook, SELECT.
2. Choose a contact that you want to make a voice dial to, then press
then press SELECT.
. Choose Edit,
3. On the Entry Details, choose “…MORE…” and press SELECT.
4. On the Add New, choose Phone Number, SELECT. This is highlighted, “No.:_______”.
Press CHANGE. Enter the corresponding contact number and then press Ok. (Do not
press DONE yet).
5. Press RECORD button on side of phone.
Follow instructions on the screen.
Note: If recording is successful, an icon will appear next to Voice Name.
6. Press DONE.
Notes: 1. The recorded voice will be played back to you.
2. In the listed names of your Phonebook, an icon appears next to a name
which has a “Voice Name”. This indicates that you can contact this person via
“voice dial”.
j. RECONNECTING SUPERTOOTH
After coming into range or turning Supertooth back on, Press the Pick-Up/Hang-Up key on
the Supertooth once.
Additional Information
Some Motorola phones have a Power-Off Delay setting that is set to 15 minutes by default.
To check if your phone has this setting
1. Press… Menu…Settings…Car Settings…
2. For Power-off delay set to 0 minutes…
3. For Charger Time set to Off…
32
Download from Www.Somanuals.com. All Manuals Search And Download.
NOKIA 6255/6230/6820/6650/6310/6310i
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1.
Press Menu and select Settings, Connectivity and Bluetooth. (For 6310 Press Menu
and select Bluetooth)
2.
3.
Select Blue tooth on and On.
Continue pressing Back then finally Exit.
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)
1.
2.
Bring the cellular phone at about 20 cm from the Handsfree Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
Press Menu and select Settings, Connectivity and Bluetooth.
5.
Select Search for audio enhancements.
The phone now searches for Bluetooth devices to be paired. When the search is
complete, it displays the names of the devices found.
6.
7.
8.
Choose the device you want to pair with your phone, Select.
Enter “0000” as the passcode then press ok.
Continue pressing Back then finally Exit.
The Handsfree Kit is paired and ready to use. An icon will be displayed during the standby
mode indicating that the Handsfree Kit is linked with the phone.
•
•
Once paired, keypad tones can be heard on the Handsfree Kit.
Pairing is done only once. When the Handsfree Kit is turned off, then turned back on, it
automatically connects to the cell phone. That is, when you have already activated the
cell phone’s Auto Accept Mode. (Kindly refer to “section c. AUTO ACCEPT MODE”).
When the paired device is deleted, it can still be viewed as an active device and not yet
completely disconnected. Thus, there will still be simultaneous connection between your
Handsfree Kit and cell phone even after deleting was done. But when you delete the
pairing and at the same time, turn off your Handsfree Kit, you automatically disconnect
the bond.
•
•
When the paired device was deleted and the Handsfree Kit was turned off, no need to
undergo the same pairing procedure. When you turn back on the Handsfree Kit, the
phone displays a question, “Pair with?…” Press Accept, enter “0000” as the passcode
and press ok.
c.
AUTO ACCEPT MODE
The auto accept mode allows the Bluetooth function to be turned on automatically whenever
the user starts sending information such as answering or making a call via the Handsfree Kit.
1.
2.
3.
4.
5.
Press Menu and select Settings, Connectivity and Bluetooth.
Select Paired devices. Choose Supertooth and press Options.
Select Request conn. authorisation.
Select No.
Continue pressing Back then finally Exit.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
e.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, same ring tone will be heard simultaneously on the
Handsfree Kit as well as on the phone.
1.
2.
Press once on the Pick-Up/Hang-Up Button to answer the call.
End the call by pressing the Pick-Up/Hang-Up Button.
Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the
Handsfree Kit.
MAKING A CALL with the Handsfree Kit on
Normal dialing
1.
Using your phone, enter the contact number and press call key.
As you dial, keypad tones can be heard on the
Handsfree Kit, not on the phone.
2.
Press the Pick-Up/Hang-Up Button to terminate the call.
Voice dialing
Refer to step i for the procedure when recording for voice dialing.
1.
2.
Press once on the Pick-Up/Hang-Up Button to activate the voice dialing.
A beep will then be heard on the Handsfree Kit prompting
the user to say the name of the person to call.
3.
4.
Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cellular phone does not recognize the name spoken,
the steps above may be repeated.
Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
f.
AUDIO TRANSFER
Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the
audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
g.
h.
REJECTING A CALL
Press the Reject Button to reject the incoming call.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones. It is also possible to use the volume keys of your cell
phone to adjust the volume.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
i.
RECORDING FOR VOICE DIALING
Use your phone when recording voice dialing.
1.
2.
3.
Press Menu and select Contacts and Search.
Choose the name which you want to make a voice dial then press Details.
Press Options and select Add voice tag. Follow the instructions that are displayed.
Your voice will then be saved on the phone after it is played back to you.
4. Continue pressing Back then finally Exit.
Note: Record your voice command in a quiet place so that only your voice will be recorded on
the phone.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
NOKIA 3230/6260/6600/6670/7610/3650
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1.
Press the Menu key. Using the joystick, scroll to Connect, press
options will be displayed. Choose Bluetooth, press to select.
Bluetooth will be displayed. Press to switch Bluetooth On.
Continue pressing Exit key to get out of Menu.
to select. A list of
2.
3.
OFF
b.
PAIRING TO THE CELLULAR PHONE
1.
2.
Bring the cellular phone at about 20 cm from the Handsfree Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for
about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will
change from blinking blue to alternate blinking red and blue. SuperTooth II is now in
Handsfree Pairing Mode.
4.
Press Menu
options will be displayed. Choose Bluetooth, press
Sway button to right side . “Paired devices” will be displayed as title. Press
button. Using the joystick, scroll to Connect, press
to select. A list of
to select. Bluetooth
ON
.
OPTIONS. New paired device, SELECT. “Searching for devices…” will be displayed.
Select the Handsfree Kit and press SELECT. “Waiting for…” and “Passcode for…” will
be displayed successively.
5.
6.
Enter “0000” as the passcode then press OK. “Waiting for…” and “Pairing
with…complete” will be displayed successively.
Continue pressing Exit to get out of Menu.
The Handsfree Kit is paired and ready to use. An icon will be displayed during the standby
mode indicating that the Handsfree Kit is linked with the phone.
Note: Once paired, press the Pick-Up/Hang-Up Button once to establish simultaneous
connection between the Handsfree Kit and the phone. (Keypad tones can be heard on the
Handsfree Kit every time the keypad is pressed). If ever the paired device was
deleted and turned off, once it is turned on, there is no need to undergo the same pairing
procedure. Press the Pick-Up/Hang-Up Button once. “Passcode for…” will be displayed. Enter
the passcode then press OK. “Accept connection request from…” press YES to reconnect.
c.
AUTO ACCEPT MODE
The auto accept mode allows the Bluetooth function to be turned on automatically whenever
the user starts sending information such as answering or making a call via the Bluetooth
Handsfree Kit.
1.
Press Menu
button. Scroll to Connect and press
. Bluetooth, press
Sway
button to right side
. “Paired devices” will be displayed as title.
2.
Select the name of the Handsfree Kit and press
. Scroll to Set as authorised, and
press
to SELECT. “Connections will take place without confirmation. Continue?”
press YES.
3.
Continue pressing Exit key to get out of Menu. An icon will then appear on the upper
right corner.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit as well as on
the phone.
1.
2.
Press the Pick-Up/Hang-Up Button once to answer the call.
End the call by pressing the Pick-Up/Hang-Up Button.
Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the
Handsfree Kit.
e.
MAKING A CALL with the Handsfree Kit on
Normal dialing
1.
Enter the contact number and send. As you dial, audio and the keypad tones can
be heard on the Handsfree Kit simultaneously but not on the phone.
Press the Pick-Up/Hang-Up Button to terminate the call.
2.
Note: If the call is terminated using the cellular phone, a tone will be heard on the
Handsfree Kit indicating that the call has been terminated.
Voice dialing
Refer to step j for the procedure when recording for voice dialing.
1.
2.
Press the Pick-Up/Hang-Up Button once to activate the voice dialing.
A beep will then be heard on the Handsfree Kit prompting the user to say the name
of the person to call.
3.
4.
Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cellular phone does not recognize the name spoken,
the steps above may be repeated.
Press the button again to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
f.
AUDIO TRANSFER
Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer
the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
g.
h.
REJECTING A CALL
Press the Reject Button to reject the incoming call
RECONNECTING SUPERTOOTH (only for some Nokia phones, others auto-connect)
After coming into range or turning SuperTooth back on, Press the Pick-Up/Hang-Up key on
the SuperTooth once to Reconnect.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
i.
j.
SETTING THE VOLUME
Setting the volume can be done during calls or every time a key is pressed on your cell phone.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls. It is also possible to use the volume keys of the cellular phone to set the
volume.
RECORDING FOR VOICE DIALING
Use your phone when recording voice dialing.
1.
2.
3.
Press the Menu
Find a contact name. Press
Press Options button. Scroll to Add Voice tag, SELECT. Instructions appear. Your voice
is automatically saved on the phone after being played back to you.
In case you wish to change your recorded voice, press Options button. Voice tag,
SELECT. Change, SELECT. Instructions appear.
button. Scroll to Contacts and press
.
button. (The contact number is the one being displayed.)
4.
5.
Continue pressing Exit key to get out of Menu.
Note: Record your voice command in a quiet place so that only your voice will be recorded on
the phone.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
NOKIA 9500 / 9300
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You may need to
register your device to download updates.
For Nokia 9500 go to www.nokia.com.au
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Select Desk…Tools…Control Panel…Connections…Bluetooth…
2. Select the Settings page…Select Bluetooth Active…Select Yes
PAIRING TO THE CELLULAR PHONE (not possible while charging)
1.
2.
Bring your phone to within about 20 cm from the Supertooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
5.
Select Desk…Tools…Control Panel…Connections…Bluetooth…
Select Paired Devices…Press New… then Start to search for devices
Your phone now searches for Bluetooth devices and will display them in the list.
Scroll to the name of the device, Supertooth, and then press Pair.
Enter “0000” as the Passcode and then press OK.
6.
7.
8.
9.
In Paired Devices select Supertooth and Press Edit.
Move to the Device Authorized field and select Yes.
10. In Paired Devices select Supertooth…Press Edit…Press Connect.
The Supertooth is paired with your Nokia 9500. An enabled Bluetooth icon will be seen on
screen indicating that the Supertooth is linked.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from
the phone and then from the Supertooth.
1.
When answering is done on the Supertooth (that is, pressing Answer once), audio
will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth). But if you wish to hear and transfer the audio to the
Supertooth, just press the Answer button once on the Supertooth.
To terminate the call, press down the Pick-Up/Hang-Up Button.
3.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL
Normal dialing
With your Phone you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Tap the number on the phone’s keypad, and then press the Talk key on the
phone.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Answer Button to transfer the audio to the Kit.
2.
To terminate the call, press down the Pick-Up/Hang-Up Button on either device.
Voice Dialing
Set up voice commands for each contact as per the Phone’s user manual.
To activate voice dialing…
1. Press the Answer button once on the Supertooth
2. When prompted by a beep, say the name you wish to call.
Redial
Calls the last number dialed from the phone.
1. Press and hold for 3 seconds the Answer key on the Supertooth.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer to the phone by accessing the phone’s Menu and selecting Transfer Call
to Handset.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit).
This will automatically transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.”
f.
REJECTING A CALL
Rejecting a call can be done from the Phone by selecting IGNORE or from the Supertooth
by pressing the Reject button.
Note: It is recommended to create a phone profile to use with the Supertooth. Configure phone
volume and ring settings to suit your cars environment.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
NOKIA WIRELESS AUDIO ADAPTER AD-5B
The Nokia Bluetooth adapter supports Bluetooth Headset Profile only,
Therefore the Supertooth needs to be placed into Headset Pairing Mode first.
a.
PAIRING TO THE CELLULAR PHONE
1.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
2.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
3.
Press the Pick-Up/Hang-Up Button once again for a short time to access Headset
Pairing Mode. The SuperTooth is now in the correct pairing mode for the AD-5B (most
important).
4.
5.
6.
Bring your AD-5B and phone to within about 20 cm from the SuperTooth.
Insert the Nokia adaptor into the pop port connector of the 7250 etc
Reset the Adapter. Press and hold the Control button on the AD-5B for 10 seconds until
the LED flashes alternately red and green.
7.
8.
9.
Next, press Once the Control button on the AD-5B to begin the search. LED will flash
Green and will turn Continuously Green after it finds the Supertooth
At this point enter the PIN KEY 0000 followed by the # key. Wait a few seconds and a
Car icon will appear on your screen.
When keys are pressed or when calls made or received audio will transfer to the
Supertooth.
The Supertooth is now connected to the Nokia pop-port phone and Bluetooth adaptor.
An enabled Bluetooth icon will be seen on screen indicating that the Handsfree Kit is
linked with the AD-5B.
If you cannot see this symbol, you will need to hit the Control Button to wake the
Bluetooth adaptor up as it goes into a sleep mode.
b.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two different ring tones may be heard from the
phone and then from the Handsfree Kit.
1.
When answering is done on the Handsfree Kit (that is, pressing Send once on the
Supertooth), audio will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone (not on
the Handsfree Kit). But if you wish to hear and transfer the audio to the Handsfree Kit,
just press the Send button once on the SuperTooth.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
c.
MAKING A CALL with the Handsfree Kit on
Normal dialing
With your AD-5B you can make a call using different methods. Please refer to your
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Dial a number on the keypad, and then press Call on the phone.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing,
audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the
case you have to press once on the Send Button to transfer the audio to the Kit.
2.
To terminate the call, press down the Pick-Up/Hang-Up Button.
d.
AUDIO TRANSFER DURING A CALL
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
e.
f.
REJECTING A CALL
Rejecting a call must be done on the phone.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
02 XDA11s
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You will need to
register your device to download updates.
For Xda11s go to www.seeo2.com
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your device to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Tap the Bluetooth icon in the bottom right of your today screen.
2. Tap Turn Bluetooth ON
PAIRING TO THE CELLULAR PHONE (not possible while charging)
1.
2.
Bring your Phone to within about 20 cm from the Supertooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
3.
4.
5.
6.
7.
Tap the Bluetooth icon in the bottom right of your today screen.
Tap Bluetooth Manager
Tap New.
Tap Handsfree/Headset Setup…Tap Next
Your device now searches for Bluetooth devices and displays them in the list.
Select display ‘All Devices’
Tap the name of the device, Supertooth, and then tap Next.
8.
9.
10. Enter “0000” as the Device PIN and then tap OK.
11. Tap Finish.
12. For the question, “Do you want to set this device as the default Handsfree device”, tap
Yes.
13. Tap ok, and then 9 to exit.
The Supertooth is now paired with your Phone. An enabled Bluetooth icon will be seen on
screen indicating that the Supertooth is linked with the Phone..
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Supertooth.
1.
When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up
once), audio will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth). But if you wish to hear and transfer the audio to the
Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth.
To terminate the call, press down the Pick-Up/Hang-Up Button.
3.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL with the Supertooth on
Normal dialing
With your Device you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Press button to bring up the dialer screen.
2.
Tap the number on the keypad, and then tap Talk key on the phone.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
Redial
Calls the last number dialed from the phone.
Redialing must be done while in the Today screen.
1. Press and hold the Pick-Up/Hang-Up key for 3 seconds.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer back to the Phone can be done by accessing the phone’s
Bluetooth Headset ꢀ icon at the top of the screen.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the
audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
f.
REJECTING A CALL
Rejecting a call must be done by selecting IGNORE on the phone or pressing the
Reject button on the Supertooth.
g.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
4.
5.
6.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Volume can also be adjusted using the phone’s volume control.
h.
RECONNECTING
The latest Rom from 02 does not support auto-reconnect on the Supertooth. To reconnect
after turning the Supertooth back on or coming into range…
3.
Press the Pick-Up/Hang-Up button on the supertooth. Wait for the connection to happen.
Then press Pick-Up/Hang-Up. OR
4.
Go to the Bluetooth Manager Tap and Hold the Supertooth, select Connect.
Note: If the volume is too high, it can cause feedback (whistling sound),
echo or background noise during calls on some cell phones.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
O2 XPHONE2
Note: Please make sure you have the latest firmware upgrade for your phone. Go to the
support section of the following website to check you have the latest version.
You will need to register your device to download updates.
For Xphone2 go to www.seeo2.com
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Select Start . Select Settings. Select Bluetooth. Select Bluetooth
2. Select On and tap ok.
PAIRING TO THE CELLULAR PHONE (not possible while charging)
1.
2.
Bring your phone to within about 20 cm from the Supertooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
5.
On your phone Select Start . Select Settings. Select Bluetooth. Select Bluetooth.
Select Menu…Select Devices… Select Menu…Select New.
Your phone now searches for Bluetooth devices and will display them in the list.
Scroll to the name of the device, Supertooth, and then press Select.
Enter “0000” as the PassKey and then tap Done.
6.
7.
8.
Enter a Display Name and Press Done. Note: In Name, you may or may not edit the
name of your bonded device).
9.
For the question, “Would you like to designate Supertooth as a handsfree device?”,
Select Yes.
The Handsfree Kit is paired with your Xphone2. An enabled Bluetooth icon will be seen on
screen indicating that the Supertooth is linked.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Handsfree Kit.
1.
When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up
once), audio will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth). But if you wish to hear and transfer the audio to the
Handsfree Kit, just press the Pick-Up/Hang-Up button once on the Supertooth.
To terminate the call, press down the Pick-Up/Hang-Up Button.
3.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL
Normal dialing
With your Phone you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Tap the number on the phone’s keypad, and then press the Talk key on the
phone.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit.
2.
To terminate the call, press down the Pick-Up/Hang-Up Button on the Supertooth
or press End on the phone
Voice Dialing
Set up voice commands for each contact as per the Phone’s manual.
To activate voice dialing…
1. Press the Pick-Up/Hang-Up button once on the Supertooth.
2. When prompted by a beep, say the name you wish to call.
Redial
Calls the last number dialed from the phone.
1. Press and hold for 3 seconds the Pick-Up/Hang-Up key on the Supertooth.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer to the phone and back during a call can be done by accessing the
phone’s Menu and selecting Turn Handsfree ON/OFF.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
f.
REJECTING A CALL
Rejecting a call can be done from the Phone by selecting IGNORE or from the Supertooth
by pressing the Reject Button
Note: It is recommended to create a phone profile to use with the Supertooth. Configure phone
volume and ring settings to suit your cars environment.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
O2 XDA11 / XDA MINI
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support
section of the relevant site to check you have the latest version. You will need to register your device
to download updates. For XDAII go to www.seeo2.com
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your XDAII to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Tap . Scroll down to Settings. Tap Connections. Tap Bluetooth.
2.
Select On and tap ok.
3.Tap 9 to exit.
b.
PAIRING TO THE CELLULAR PHONE
1.
2.
Bring your XDAII to within about 20 cm from the Handsfree Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
4.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now
in Handsfree Pairing Mode.
Press the Pick-Up/Hang-Up Button once again for a short time to access Headset
Pairing Mode. The Supertooth is now in the correct pairing mode for the XDAII .
(most important)
5.
6.
Tap . Scroll down to Settings. Tap Connections tab. Tap Bluetooth.
Tap Bonded Devices tab. Tap New.
Your device now searches for Bluetooth devices and displays them in the list.
Tap the name of the device, that you want to bond with your PC phone, and then tap
Next.
7.
8.
9.
Enter “0000” as the Device PIN and then tap Next.
Tap Finish. (Note: In Name, you may or may not edit the name of your bonded device).
10. For the question, “This Bluetooth device supports headset profile, would you like to set it
as your Blue tooth headset?”, tap Yes.
11. Tap ok, and then 9 to exit.
The Handsfree Kit is paired with your XDAII. An enabled Bluetooth icon will be seen on screen
indicating that the Handsfree Kit is linked with the XDAII.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Handsfree Kit.
1.
When answering is done on the Handsfree Kit (that is, pressing Send once), audio
will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Handsfree Kit). But if you wish to hear and transfer the audio to the
Handsfree Kit, just press the Send button once on the Supertooth.
To terminate the call, press down the Pick-Up/Hang-Up Button.
3.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL with the Handsfree Kit on
Normal dialing
With your XDAII you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.
Press button to bring up the dialer screen.
2.
Tap the number on the keypad, and then tap Talk key.
Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing,
audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the
case you have to press once on the Send Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up
Button.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer back to the XDAII can be done by accessing the phone’s
Bluetooth Headset ꢀ icon.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button.
f.
REJECTING A CALL
Rejecting a call must be done by selecting IGNORE on the phone or by pressing the Reject
Button on the Supertooth II
g.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
Useful Information for XDA11
After pairing the Supertooth please make sure headphones are enabled on your XDAII.
Tap Start....Settings... Today....Items and tick Profile. (Make sure profile is ticked).
This allows you to enable or disable the Supertooth. You will see a small headphones symbol on
the main screen allowing you to connect or disconnect from the Supertooth quickly...
Note: The XDAII can only use one audio device set as the default. To use a second paired device
as the default, a workaround is to rename the device.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
02 XPHONE
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You will need to
register your device to download updates.
For Xphone go to www.seeo2.com
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your Xphone to establish a Bluetooth connection
between your device and other Bluetooth devices.
1. Tap . Scroll down and Tap Settings. Tap Bluetooth.
2. Scroll to On and Tap Done.
PAIRING TO THE CELLULAR PHONE
1.
2.
Bring your Xphone to within about 20 cm from the SuperTooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A tone will be heard and the Bluetooth Indicator LED
will change from blinking blue to alternate blinking red and blue.
SuperTooth II is now in Handsfree Pairing Mode.
4.
Press the Pick-Up/Hang-Up Button once again for a short time to access Headset
Pairing Mode. The SuperTooth is now in pairing mode for Xphone (most
important)
5.
6.
7.
8.
9.
Tap . Scroll down and Tap Settings. Tap Bluetooth and then Menu.
Tap Bonded Devices tab. Tap Menu and then New. (Xphone will now search for devices)
Scroll to SuperTooth and select Add.
Enter “0000” as the Device PIN and then tap Done.
For the question, “This Bluetooth device supports headset profile, would you like to set it
as your Bluetooth headset?”, tap Yes.
10. Tap ok, and then exit.
The Handsfree Kit is paired with your Xphone.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the SuperTooth.
1.
When answering is done on the SuperTooth (that is, pressing Send once), audio will be
heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone (not on
the SuperTooth). But if you wish to hear and transfer the audio to the Handsfree Kit, just
press the Send button once on the SuperTooth.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
d.
MAKING A CALL with the Handsfree Kit on
Normal dialing
With your Xphone you can make a call using different methods. Please refer to your PC
Phone’s User Guide.
The most direct method is by using the Phone keypad.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
Press button to bring up the dialer screen.
2.
Tap the number into the keypad, and then tap Talk key.
Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing,
audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the
case you have to press once on the Send Button to transfer the audio to the Kit.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
e.
AUDIO TRANSFER DURING A CALL
1. Audio Transfer back to the Xphone can be done by accessing the
phone’s Bluetooth Headset ꢀ icon.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button. The audio will be transferred
from the phone to the kit.
f.
REJECTING A CALL
Rejecting a call must be done by selecting IGNORE or pressing the Reject button on the
Xphone.
g.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
3.
4.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (Whistling
sound), echo or background noise during calls on some cell phones.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
PALM TREO 650
Note: Please make sure you have the latest firmware upgrade for your phone. Go to the
support section of the following website to check you have the latest version. You will need to
register your device to download updates.
For Treo 650 go to www.palmone.com/au
a.
b.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Press the Home Button to bring up the main menu.
2. Tap the Bluetooth icon
2. Tap On.
PAIRING TO THE CELLULAR PHONE (not possible while charging)
14. Bring your phone to within about 20 cm from the Supertooth.
15. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm(1) to the 55º
position. The Bluetooth Indicator(9) will glow (blue blink).
16. Simultaneously press the Reject Button(2) and the Pick-Up/Hang-Up Button(7) for
about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will
change from blinking blue to alternate blinking red and blue. SuperTooth II is now in
Handsfree Pairing Mode.
17. On your phone Tap the Bluetooth icon at the top of the screen.
18. Tap Setup Devices. Tap Hands-free Setup. Tap Next.
19. For Show Devices, Select All known devices
20. Your phone now searches for Bluetooth devices and will display them in the list.
21. Tap the name of the device, Supertooth, and then Tap OK.
22. Enter “0000” as the PassKey and then tap Done.
23. Tap Done to complete the process.
The Supertooth is paired with your Treo 650. An enabled Bluetooth icon will be seen on screen
indicating that the Supertooth is linked.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Supertooth.
4.
When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up
once), audio will be heard on it.
5.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth). But if you wish to hear and transfer the audio to the
Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth.
To terminate the call, press down the Hang-Up Button.
6.
d.
MAKING A CALL
Normal dialing
With your Phone you can make a call using different methods.
Please refer to your PC Phone’s User Guide.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
The most direct method is by using the Phone keypad.
4.
Tap the number on the phone’s keypad, and then press the DIAL key on the
phone.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio
will be heard on the phone and not immediately on the Supertooth. If this is the case you
have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit.
5.
To terminate the call, press down the Hang-Up Button on the Supertooth or press
End on the phone
Voice Dialing
Voice Dialling is not included in the Treo but is available as a software add-on.
Set up voice commands for contact’s as per the Palm Voice Dial user manual.
To activate voice dialing…
1. Press the Pick-Up/Hang-Up button once on the Supertooth, or press the Multi-Function
button on the phone.
2. When prompted by a beep, say the name you wish to call.
Redial
Calls the last number dialed from the phone.
1. Press and hold for 3 seconds the Pick-Up/Hang-Up key on the Supertooth.
e.
AUDIO TRANSFER DURING A CALL
Kit to Phone
Flip down the Swivel Arm (1) to 0º position (or turn-off the unit). This will automatically
transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button(7). The audio will be transferred
from the phone to the kit.”
f.
REJECTING A CALL
Rejecting a call can be done from the Phone by selecting IGNORE or from the Supertooth by
pressing the Reject Button
Note: It is recommended to create a phone profile to use with the Supertooth. Configure phone
volume and ring settings to suit your cars environment.
g.
RECONNECTING SUPERTOOTH
After turning the SuperTooth back on, Press the Pick-Up/Hang-Up key on
the SuperTooth once to Reconnect.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
PANASONIC P342i / X700 / X70
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1. Go to Menu by pressing the center button of the 5-way navigation key featured as
2. (For X70 scroll to Organizer then) Scroll to Connect, Select. Bluetooth, Select.
3. On/Off, Select. Choose On, Select.
.
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging the Supertooth)
1.
2.
Bring the cellular phone at about 20 cm from the Supertooth.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
5.
Go to Menu by pressing center button of
then) Scroll to Connect, Select. Bluetooth, Select.
Choose Discover & Pair, Select.
key. Select. (For X70 scroll to Organizer
The phone is now searching for pairable devices to be added.
6. To finish the search press Stop Scroll to the Supertooth you want to pair with your cell
phone, and then press Pair.
7. Enter “0000” as the passkey then press Ok. If the pairing is successful, the alternating
Red/blue lights will stop.
8. Continue pressing to exit.
The Supertooth is paired and ready to use. An icon appears during the standby mode
indicating that the Kit is linked with the phone.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, the ring tone will be heard on the phone and on the
Supertooth.
1.
When answering is done on the Supertooth (that is, pressing the Pick-Up/Hang-Up
Button once), ongoing will be heard from it.
2.
When answering is done on the phone, ongoing call will be heard from it (not on the
Supertooth). But if you wish to hear and transfer the call to the Kit, just press once on the
Kit’s Pick-Up/Hang-Up Button.
3.
To terminate the call, press once on the Pick-Up/Hang-Up Button.
d.
MAKING A CALL with the Supertooth on
Normal dialing
1.
Using your phone, enter the contact number and press the Call key on the phone. Audio
is heard on the phone and no immediate audio heard on the Supertooth yet. You have
to press the Pick-Up/Hang-Up Button once to transfer the audio to the Supertooth.
Press once on the Pick-Up/Hang-Up Button to terminate the call.
2.
Voice dialing
Refer to step i and j for activating and recording voice dialing.
1.
Press the Pick-Up/Hang-Up Button once to activate
53
Download from Www.Somanuals.com. All Manuals Search And Download.
the voice dialing.
2.
3.
Beep will then be heard on the Supertooth prompting the
user to say the name of the person to call.
Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cell phone does not recognize the name spoken, the
steps above may be repeated.
4.
Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
e.
AUDIO TRANSFER
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer
the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then press shortly the
Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit.”
f.
REJECTING A CALL
Press the Reject Button to reject an incoming call.
g.
RECONNECTING SUPERTOOTH
After coming into range or turning SuperTooth back on, Press the Pick-Up/Hang-Up key on the
SuperTooth once to Reconnect.
h.
SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume set is too high, it can cause feedback (whistling sound), echo or
background noise during calls on some cell phones.
i.
ACTIVATING THE VOICE DIALING
Use your phone when recording for the voice dialing. Before voice dialing, you must first turn
on the Voice Dial function and record your voice. To turn voice dial on:
1.
2.
3.
Go to the Menu by pressing
On the Contacts List, choose Settings, Select.
Choose Voice Dial, Select. Choose On and press Ok.
key. Scroll to Contacts List, Select.
4. Continue pressing
to exit.
j.
RECORDING FOR VOICE DIALING
1.
2.
3.
4.
Go to Menu by pressing
On the Contacts List, scroll down to Voice Dial, Select.
Press Menu. Choose Add, Select.
key. Scroll to Contacts List, Select.
On the contact names listed, choose the name which you want to make a voice dial.
5.
After choosing a contact, press again center button of
key. Choose Recall, Select.
“Please Record Your Voice!”, press Ok.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
7.
Follow the instructions on the screen. Voice is then saved on the phone. Under Voice
Dial list, the name which already has a voice command appears.
Continue pressing
to exit.
Note: Noisy environment may affect voice recognition.
Record your voice in a quiet environment.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP GX30/GX32/GX15/GX25
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1.
2.
3.
4.
Press
to display Main Menu.
Highlight Settings, and then press
Select Connectivity, Bluetooth, Bluetooth On/Off and Select On.
Continue pressing Back then finally Exit.
to select.
The Bluetooth setting is activated. Bluetooth icon is displayed on standby mode screen.
b. PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)
1.
2.
Bring the cellular phone at about 20 cm from the Handsfree Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for
about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will
change from blinking blue to alternate blinking red and blue. SuperTooth II is now in
Handsfree Pairing Mode.
3.
4.
5.
Press Joystick to display Main Menu.
Highlight Settings, and then press
to select.
Select Connectivity, Bluetooth and Search for Devices.
Note: The phone displays three categories: “Headset”, “Car kit”, and “All”. If you select
“All”, the phone lists devices from all categories.
The phone now searches for Bluetooth devices to be paired. When the search is
complete, devices found in the selected category are listed.
6.
7.
8.
Highlight the desired device for pairing, and then press
Enter “0000” as the passcode then press ok.
Continue pressing Back then finally Exit.
to select.
The Handsfree Kit is paired and ready to use.
c.
d.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a tone will be heard on the Handsfree Kit.
1.
2.
Press once on the Pick-Up/Hang-Up Button to answer a call.
End the call by pressing the Pick-Up/Hang-Up Button.
Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the
Handsfree Kit.
MAKING A CALL with the Handsfree Kit on
Normal dialing
1.
2.
Using your phone, enter the contact number and press Send key on the phone.
Audio will be heard on the Handsfree Kit.
Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
e.
AUDIO TRANSFER
Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This
will automatically transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then
press shortly the Pick-Up/Hang-Up Button.
The audio will be transferred from the phone to the kit.
f.
REJECTING A CALL
Press the Reject Button to reject the incoming call.
g.
RECONNECTING
After coming into range or turning SuperTooth back on, Press the Pick-Up/Hang-Up key on the
SuperTooth once to Reconnect.
h. SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume set is too high, it can cause feedback (whistling sound), echo or
background noise during calls on some cell phones.
f.
BlUETOOTH TIME OUT
To conserve battery power you can set Bluetooth to switch off after a certain time period.
1.
Press
to display Main Menu.
2.
3.
Highlight Settings, and then press
Select Connectivity, Bluetooth, Bluetooth Settings, Bluetooth Time Out and select
desired setting. The default is No Time Out
to select.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
SIEMENS S65 / S55
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1.
2.
Press Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT.
Scroll to Bluetooth, CHANGE. The phone is now connecting to the Bluetooth device. An
icon will appear on the upper left corner when connected. Note: OPTIONS button may
also be pressed. Choose Activate BT, then SELECT.
3. Continue pressing the On/Off/End Key to exit Menu.
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)
1.
2.
Bring the cellular phone at about 20 cm from the Handsfree Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
4.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
Press Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT. Scroll to
Bluetooth, OPTIONS. Scroll to Search for…, press ACCESS button. The phone is now
searching for devices. When the search is complete, Devices disc. is displayed as title.
If the device you are looking for is not on the list, repeat the procedure by pressing the
OPTIONS and REPEAT buttons. Then press SELECT to add the device. The phone will
initiate connection with the Handsfree Kit.
5.
Pls. enter BT pin for… , OK. Enter “0000” as the BT pin then press OK. Handsfree
trusted will be displayed afterwards indicating that the pairing is completed.
6. Continue pressing the On/Off/End Key to exit Menu.
The Handsfree Kit is paired and ready to use. An icon will be displayed during the standby
mode indicating that the Handsfree Kit is linked with the phone.
c.
d.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard from the phone.
1.
2.
Press the Pick-Up/Hang-Up Button once to answer the call.
End the call by pressing the Pick-Up/Hang-Up Button.
Note: Cell phone buttons can also be used to answer a call. To transfer the call to the
Handsfree Kit, press the Pick-Up/Hang-Up Button once.
MAKING A CALL with the Handsfree Kit on
Normal dialing
1.
Enter the contact number and send. This phone does not transfer calls to the
Supertooth II automatically when making a call. After dialing, to transfer audio to
the Supertooth II, press the Pick-Up/Hang-Up Button once.
2.
Press the Pick-Up/Hang-Up Button to terminate the call.
Voice dialing
Refer to step h for the procedure when recording for voice dialing.
1.
Press the Pick-Up/Hang-Up Button once to activate the voice dialing.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
A beep will then be heard on the Handsfree Kit prompting the user to say the name
of the person to call.
Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cellular phone does not recognize the name spoken,
the steps above may be repeated.
4.
Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button. It will trigger the cell phone to redial
the last number. Audio will be heard on the Handsfree Kit.
e.
AUDIO TRANSFER
Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit).
This will automatically transfer the audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit).
Then press shortly the Pick-Up/Hang-Up Button. The audio will be
transferred from the phone to the kit.
f.
REJECTING A CALL
Press the Reject Button to reject an incoming call.
g.
SETTING THE VOLUME
Setting the volume can be done during calls only.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls.
h.
RECORDING FOR VOICE DIALING
Use your phone when recording for voice dialing. Record your contact names and numbers in
the “Address book” (phone memory).
1.
From standby mode, open the Address book by pressing the arrow down key
.
(If Phonebook is the one displayed, press
key to switch to Address book.)
2.
3.
Select a contact name then press Options.
Scroll to Voice dialing, SELECT. New, SELECT. Recording for: contact name,YES.
Follow the instructions. Your voice will automatically be saved on the phone after being
played back to you.
4.
5.
In case you wish to change your recorded voice, press Options button. Voice tags,
SELECT. Change, SELECT. Instructions appear.
Press On/Off/End key to exit.
Note: Noisy environment may affect voice recognition.
Record your voice in a quiet place.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
SIEMENS SX1
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your mobile phone to establish Bluetooth
connection between it and other Bluetooth devices.
1.
Press Menu key
Setup
is highlighted. Press Options
Choose On and press Ok.
Continue pressing until you finally Exit.
Bluetooth.
2.
3.
4.
Change.
b.
PAIRING TO THE CELLULAR PHONE (not possible charging the Handsfree Kit)
1.
2.
Bring the cellular phone at about 20 cm from the Hands-free Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for
about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will
change from blinking blue to alternate blinking red and blue. SuperTooth II is now in
Handsfree Pairing Mode.
3.
4.
Press Menu key
Setup
will be displayed.
Sway the joystick to the left to open Paired devices window.
Press succeedingly button for Options New paired device.
Bluetooth.
5.
6.
The phone will then start to search for other Bluetooth devices until it displays them in
the list.
7.
8.
9.
Select the device you want to connect with your phone.
Enter “0000” as the passcode and press OK.
Highlight the paired device, press Options and choose Connect.
The statement “Connected to… “appears.
10. Continue pressing
until you finally Exit.
The Hands-free Kit is paired and ready to use.
Notes:
You only have to do the pairing process once for a particular phone. You will only redo
the process if you want to pair it with another mobile phone.
If you turn-off your Hands-free kit, it will disconnect with your phone. If you turn it back
on, just shortly press the Pick-Up/Hang-Up Button. A question, “Accept connection
request from….? “will be displayed. Press Yes to reconnect.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
c.
AUTO ACCEPT MODE
1. Press Menu key
2.
Setup
Bluetooth.
is highlighted.
3.
4.
5.
Sway the joystick to the right to view Paired devices window.
Choose the name of this hands-free kit and press Options
statement “Connections will take place without confirmation. Continue?”
Set as authorised.
A
appears. Press Yes.
6.
Continue pressing
until you finally Exit.
d.
e.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, ring tone will be heard on the phone and on the Hands-free Kit.
1.
2.
Shortly press the Pick-Up/Hang-Up Button to answer the call.
Shortly press the Pick-Up/Hang-Up Button to end the call.
Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the Handsfree Kit.
MAKING A CALL with the Hands-free Kit on
Normal dialing
1.
Enter the contact number and shortly press Call key (Audio will be on the Handsfree Kit).
2.
Shortly press the Pick-Up/Hang-Up Button to terminate a call.
Voice Dialing
You can dial a phone number by simply saying a word. First, you have to refer to section i for
procedure in recording for voice dialing.
1.
2.
Shortly press the Pick-Up/Hang-Up Button to activate voice dialing.
A beep will then be heard on the Handsfree kit prompting the user to say a voice name/
voice tag of the person to call.
3.
Say a voice name. The name will be played back to you. The phone will then place the
call automatically. In case the cell phone does not recognize the name spoken, the steps
above maybe repeated.
4.
Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
f.
AUDIO TRANSFER
Audio Transfer can be done during an ongoing call.
1.
Press Options Activate Handset or BT Handsfree on.
g.
h.
REJECTING A CALL
Shortly press the Reject Button to reject an incoming call.
SETTING THE VOLUME
Adjust the Volume Control of the Handsfree kit during an ongoing call.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume set is too high, it can cause feedback (whistling sound), echo or
background noise during calls.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
i.
RECORDING FOR VOICE DIALING
Note:Voice dialing entries must be stored in the phone’s memory (not on the SIM card!).
1.
2.
3.
Press Menu Key
Choose and Open an entry you want to make a voice dial.
Under the selected entry, highlight the phone number and press Options
Contacts.
Add voice
tag.
4.
Follow the instructions displayed on screen. Note: You may use any word(s) or just use
the person’s name for a voice tag.
5.
6.
Wait until the word(s) is repeated and automatically saved by the phone.
Continue pressing
until you finally Exit.
Note: Record a voice in quiet environment.
Voice tags are sensitive to loud background noise.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
SONY ERICSSON K700i / S700i / Z1010 / Z600 / T610 / T628 / T630
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your cell phone and other Bluetooth devices.
1.
2.
3.
Press
Scroll to Connectivity, Select. Bluetooth, Select. Turn On, Select.
Continue pressing to exit.
to access Main Menu.
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)
1.
2.
Bring the cellular phone at about 20 cm from the Handsfree Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode..
4.
5.
6.
7.
8.
Press
Select.
to access Main Menu. Scroll to Connectivity, Select. Choose Bluetooth,
Scroll to My devices, Select. New device, Add. The phone will then search
for pairable devices to be added.
The searched devices will then be displayed. Choose the device name you want to pair
with this phone, then press Select.
Enter “0000” as the passcode then press Ok. If pairing is successful, the alternating
red/blue lights (Bluetooth Indicator) will stop and will change to plain blinking blue.
Your device name is now added under My devices tab. Highlight the newly paired
device and then press Connect to completely establish connection between your cell
phone and your hands free kit.
9.
When a statement appeared indicating that your device is connected, continue pressing
to exit.
The Handsfree Kit is paired and ready to use.
Notes: You only have to do the pairing process once for a particular phone. You will only redo
the process if you want to pair it with another mobile phone. If you turn off your Hands-free kit,
it will disconnect with your phone. If you turn it back on, you can reconnect by shortly pressing
the Pick-Up/Hang-Up Button on the Supertooth once for T610/T628/T630. For
K700i/S700i/Z1010/Z600 press the Pick-Up/Hang-Up button twice (Once will connect and then
activate voice dialing on some versions).
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit.
1.
2.
Just shortly press the Pick-Up/Hang-Up Button to answer the call.
In your cell phone, a question will be displayed “…Answer?” If you press YES button
on your phone as reply, audio will still be heard on the SuperTooth.
To terminate the call, press the Pick-Up/Hang-Up Button.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
d.
MAKING A CALL with the Handsfree Kit on
Normal dialing
1.
Enter the contact number and press Call key.
Audio will be heard on the Handsfree Kit.
2.
Shortly press the Pick-Up/Hang-Up Button to terminate the call.
Voice dialing
Make a call by saying a voice name/voice tag.
But first, refer to step i and j for the procedure when activating and recording for voice
dialing.
1.
2.
Shortly press the Pick-Up/Hang-Up Button to activate voice dialing.
A beep will then be heard on the Handsfree Kit prompting the user to say a voice
name/voice tag of the person to call.
3.
Say a voice name. The name will be played back to you. The phone will then place
the call automatically. In case the phone does not recognize the name spoken, the
steps above may be repeated.
4.
Shortly press the Pick-Up/Hang-Up Button to terminate the call.
Redialing
Make a long press on the Pick-Up/Hang-Up Button to redial the last number.
e.
AUDIO TRANSFER
Audio Transfer can be done by accessing the phone’s Menu during an ongoing call.
Kit to Phone
Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the
audio from the kit to the phone.
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then press shortly the
Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit.
f.
REJECTING A CALL
Shortly press the Reject Button to reject an incoming call.
g.
RECONNECTING TO THE SUPERTOOTH
When turning the Supertooth back on, shortly press the Pick-Up/Hang-Up button once for
T610/T628/T630. For K700i/S700i/Z1010/Z600 press the Pick-Up/Hang-Up button twice (Once
will connect and then activate voice dialing on some versions).
h.
SETTING THE VOLUME
Adjust the Volume Control of the Handsfree kit during an ongoing call.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume set is too high, it can cause feedback (whistling sound), echo or
background noise during calls on some phones.
i.
ACTIVATING THE VOICE DIALING
Before voice dialing, you must first activate the voice dialing function of your phone and record
a voice command for a particular contact.
1.
Press
Voice dialing, Select. Activate, Select.
Continue pressing to exit.
to access Main Menu. Scroll to Settings, Select. Voice control, Select.
2.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
j.
RECORDING FOR VOICE DIALING
Note:Voice dialing entries must be stored in the phone’s memory (not on the SIM card!).
1.
Press
to access Main Menu. Scroll to Settings and press Select. Choose Voice
control, Select. Voice dialing, Select. Edit names, Select. New voice, Add. (Contacts
list will appear).
2.
3.
4.
5.
Choose among the contacts whichever you want to have a voice name/voice tag. When
it’s highlighted, press Select.
Follow the instructions that will be displayed on screen.
Note: You may use any word(s) or just say the person’s name for a voice tag.
When your spoken word(s) is caught up by the phone, it will ask you to listen to your
recording and will ask the question “Is it ok?”
As soon as you press Yes as reply, your voice command will be saved. Under Voice
Commands tab, a callout icon
command.
will appear next to a contact name which has a voice
6.
Continue pressing
to exit.
SETTING TO LOW POWER MODE (optional settings on some models)
1.
2.
3.
4.
Press Menu key . Scroll to Connectivity, SELECT. Bluetooth, SELECT.
Scroll to Handsfree, SELECT. Choose Car handsfree, SELECT.
Choose Power Save, SELECT.
Continue pressing
to exit.
Note: Voice Answer is not supported by the Supertooth.
Note: Please see the Additional information on Resetting phones on Page15.
Note: Noisy environment affects voice recognition. Record voice dial in a quiet environment.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
SONY ERICSSON P800 / P900 / P910
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection
between your mobile phone and other Bluetooth devices.
1. Flip to open mode. On the phone’s Applications window, scroll to Control Panel and tap it
using the “stylus”. On the lower portion, tap Connections index. Tap Bluetooth. Tap
Settings index. On the Operation mode, tap On.
2. Tap
to exit and return to the Applications window.
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit)
1.
2.
Bring the cellular phone at about 20 cm from the Handsfree Kit.
The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow (blue blink).
3.
Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree
Pairing Mode.
4.
5.
Press the Pick-Up/Hang-Up Button once again for a short time, to access Headset
Pairing Mode.
Flip to open mode. On the phone’s Applications window, scroll to Control Panel and tap
it. On the lower portion, tap Connections index. Tap Bluetooth. Tap Devices index.
Bluetooth devices are displayed as a sub-title. Tap Add. The phone is now searching
for pairable devices.
6.
On the lower left corner of the screen, tap
. Enter “0000” as the passkey then tap
Done. Also tap Done under the sub-title, “Secure Connection.” If pairing is successful,
the alternating red/blue lights will stop.
7.
8.
Tap
to exit and return to the Applications window. If the pairing is unsuccessful, the
steps above may be repeated.
Tap on Phone Symbol on main screen. Tap edit. Tap Preferences. Tap Handsfree. For
Bluetooth – Preferred Sound Device, select Headset. Press Done to exit.
The Handsfree Kit is paired and ready to use. An icon will appear during the standby mode
indicating that the Handsfree Kit is linked with the phone.
Note: Make sure your device has the latest firmware from Sony Ericsson.
c.
d.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit.
1.
2.
Just press the Pick-Up/Hang-Up Button once to answer the call.
If you wish to answer a call on the cellular phone, just press YES and the
audio will be on the phone. Pressing the Pick-Up/Hang-Up Button
will transfer the audio to the Handsfree Kit.
3.
To terminate the call, press the Pick-Up/Hang-Up Button.
MAKING A CALL with the Handsfree Kit on
Normal dialing
1.
2.
Enter the contact number and press OK. Audio will automatically be heard on the
Handsfree Kit.
Press the Pick-Up/Hang-Up Button to terminate the call.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice dialing
Refer to step g and h for the procedure when activating and recording for voice dialing.
1.
2.
Press the Pick-Up/Hang-Up Button once to activate the voice dialing.
A beep will then be heard on the Handsfree Kit prompting the user to say the name
of the person to call.
3.
4.
Say the name. The name will be played back to you. The phone will then place the
call automatically. In case the cell phone does not recognize the name spoken, the
steps above may be repeated.
Press the Pick-Up/Hang-Up Button to terminate the call.
e.
f.
AUDIO TRANSFER
Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.
SETTING THE VOLUME
Setting the volume can be done using the volume control.
1.
2.
Turn it clockwise to increase the volume.
Decrease the volume by turning it counter-clockwise.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background
noise during calls on some cell phones.
g.
ACTIVATING THE VOICE DIALING
Use your phone when recording for the voice dialing. Before voice dialing, you must first turn
on the name dialing function and record your voice. To turn voice dialing on:
1.
2.
3.
Flip to open mode. On the phone’s Applications window, tap Phone.
Tap Edit then Preferences. A list of features will appear.
Tap Voice Control then tap the box aligned to Voice dialing to check and activate the
voice dialing feature. Tap the box aligned to Play caller name to check so that the name
will be played back to you.
4.
5.
6.
Tap Done on the on screen button when finished.
On the Preferences mode, tap Done again.
Tap
to exit and return to the Applications window.
h.
RECORDING FOR VOICE DIALING
The voice dialing feature is only applicable to contacts saved to phone memory.
1.
2.
Flip to open mode. On the phone’s Applications window, tap Contacts.
Tap the contact where you want to add a voice dialing feature. Tap Edit. Scroll to Edit
Contact. Tap
on the on-screen buttons.
3.
4.
Tap Record. “Speak after tone” will be displayed on the screen.
Record your voice. To check if your recording is of good quality, tap Play. If not, tap
Record again. Tap Done when finished.
5.
Tap
to make another record and repeat the steps above.
To return to the Applications window, tap
Noisy environment may affect voice recognition. Record your voice in a quiet environment.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
FREQUENTLY ASKED QUESTIONS
(FAQ)
1. Am I using the correct pairing Mode according to my phone?
2. Why won’t my Supertooth II won’t go into Pairing mode?
3. Is my Supertooth II Charged?
4. Why will my Supertooth II not connect when turned on or comes into
range (10m)?
5. Why can’t I hear any sound from the Speaker?
6. Why is the Supertooth II noisy and distorted?
7. Is it safe to use Bluetooth devices, I have heard they can allow
unauthorized connections?
1. Am I using the correct pairing Mode according to my phone?
•
It is of most importance to establish whether your mobile phone uses
Handsfree or Headset Modes for Pairing, and to use the appropriate
mode when pairing the Supertooth II. If both are available, use
Handsfree. (To find out refer to the table in this User Manual, or in the
Bluetooth section of your phones manual.)
2. Why won’t my Supertooth II won’t go into Pairing mode?
•
Follow through the Pairing Guide according to your phone in the
Supertooth II Manual or below.
•
•
Be clear about the extra step required to enter Headset Mode
The Supertooth II sometimes requires a few seconds to establish a
connection. Advise user to be patient while devices are searching.
3. Is my Supertooth II Charged?
•
•
Blue Flashing Light = Battery Charged
Red Flashing Light = Battery Low needs recharging
68
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Why will my Supertooth II not connect when turned on or comes into
range (10m)?
•
•
Make sure you are using the correct profile for your phone, Headset or
Handsfree.
Some phones will not connect to Supertooth II immediately when in range
and require the user to press the Pick-Up/Hang-Up key on the
Supertooth II once, to establish connection.
5. Why can’t I hear any sound from the Speaker?
•
Make sure the Volume control knob is turned up when making the
connection or making a call. This is the simplest solution but often is the
most correct.
6. Why is the Supertooth II noisy and distorted?
•
Turn Supertooth II Volume knob down to a level that does not give echo or
feedback.
•
•
Turn the volume down on your phone and up on the Supertooth II.
You may have low antenna strength from your phone network.
Also, some people like to have their phone ring loudly, but this may cause distortion
when transferred to the Supertooth II speaker. In your phone, set up a Profile with
lower ringing volumes and keypad tones and activate when using with Supertooth II.
(see your phones user manual for instructions).
7. Is it safe to use Bluetooth devices, I have heard they can allow
unauthorized connections?
•
For Bluetooth security reasons, once you have set up your bluetooth devices
we recommend turning OFF the visibility option in the Bluetooth Menu of
your phone so that other Bluetooth users cannot see the contents of your
phone. (This only applies to a few mainly older Bluetooth enabled phones as
most new phones have better security.)
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications:
Bluetooth Standard............................... Bluetooth V1.1, Class II
Frequency............................................. 2.4GHz
Maximum communication distance....... Approx. 10m
Operating Talk Time ............................. 20 hours
Operating Standby Time....................... 800 hours
Charging Time ...................................... About 3 hours
Bluetooth Profiles supported................. Handsfree, Headset
Battery Type ......................................... Rechargeable Lithium Ion
Speaker ................................................ 50mm, High Power Neodyne type
Microphone........................................... With built-in noise canceller
Weight................................................... 133.3 g (without clip)
Dimension............................................. lwh: 138x60x25 mm
Other Comments ..........................•
A Full-Duplex device
•
•
•
Compact size
Compatible to all Bluetooth Cell phones
With a Smart Digital Signal Processor (DSP)
for Noise Cancellation and Echo Suppression
Supports Voice Dialing (if phone supports)
Supports Redialing (for Handsfree profile only)
Supports Multi-pairing to 2 Devices
Single Pick-Up/Hang-Up Button
•
•
•
•
•
•
•
With Call Reject Button
Adjustable Volume Control
0º, 55º, 210º Swivel Arm orientations for easy
access of the microphone even when the sun
visor is up or down
72
Download from Www.Somanuals.com. All Manuals Search And Download.
|
BenQ Thermometer SP920P User Manual
Black Decker Sander 6127 67 User Manual
Blue Rhino Lawn Mower 48 inch User Manual
Braun Coffeemaker KF 177 User Manual
Brother Sewing Machine 885 V11 User Manual
Brother Wireless Office Headset BAS 300G User Manual
Bush Hog Lawn Mower MBX User Manual
Cary Audio Design Stereo Amplifier CAD 211 FE User Manual
Chauvet Baby Accessories 3P User Manual
Cisco Systems Computer Drive OL 7822 06 User Manual