Blaupunkt MP3 Player MP54 User Manual

Radio / CD / MP3  
Acapulco MP54 US  
7 644 275 310  
Casablanca MP54 US 7 644 295 310  
Operating instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
3
4
5
6
7
8
16  
15  
14  
13  
12  
11  
10  
9
17  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
1
Button to switch the device on/  
off and operate the volume mute  
feature  
:
OK button to confirm menu en-  
tries and activate the scan func-  
tion.  
2
3
button to open the flip-release  
control panel  
;
<
=
Keys 4 - 6  
Display  
RDS button to switch the RDS  
function on/off (Radio Data Sys-  
tem).  
AM button to select AM radio  
mode as the source and select  
the AM memory banks.  
4
FM button to select FM radio  
mode as the source and select  
the FM memory banks.  
TS to start the Travelstore func-  
tion  
>
?
@
AUDIO button to adjust the  
bass, treble, balance and fader.  
DEQ button to activate/deacti-  
vate and set up the equalizer.  
SRC button to switch between  
the CD/MP3, CD changer (if  
connected) and AUX sources.  
5
6
7
8
Volume control  
Keys 1 - 3  
Arrow buttons  
A
button to eject the CD from  
the device  
DIS•ESC button to change the  
display content and close men-  
us.  
9
MENU button to open the basic  
settings menu.  
Long press: Deactivate / activate  
demo mode.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Switching bandwidth during  
Notes and accessories ............ 7  
Road safety ..................................... 7  
Installation ....................................... 7  
Accessories .................................... 7  
Activating /  
interference (SHARX).................... 16  
Configuring the display .................. 16  
Naming radio stations (only FM) .... 17  
Activating/deactivating the radio  
text display .................................... 17  
deactivating demo mode.................. 8  
CD mode ................................ 18  
Switching to CD mode .................. 18  
Selecting tracks ............................ 18  
Fast track selection ....................... 18  
Fast searching (audible) ................ 18  
Random track play (MIX) ............... 18  
Scanning tracks (SCAN) ............... 19  
Repeating tracks (REPEAT) ........... 19  
Pausing playback (PAUSE)............ 19  
Changing the display ..................... 19  
Displaying CD text/CD name ......... 20  
Naming CDs ................................. 20  
Ejecting a CD ................................ 22  
Detachable control panel......... 8  
Theft protection ............................... 8  
Detaching the control panel ............. 8  
Attaching the control panel .............. 9  
Switching on/off ...................... 9  
Adjusting the volume ............. 10  
Setting the power-on volume ......... 10  
Instantaneously decreasing the  
volume (mute)................................ 10  
Telephone audio / navigation audio .. 10  
Setting the volume of the  
confirmation beep.......................... 11  
Automatic sound ........................... 11  
MP3 mode .............................. 22  
Preparing an MP3-CD ................... 22  
Switching to MP3 mode ................ 24  
Configuring the display .................. 24  
Selecting a directory...................... 24  
Selecting tracks ............................ 25  
Fast searching  
(not in MP3 browse mode) ............ 25  
Random track play – MIX  
(not in MP3 browse mode) ............ 25  
Scanning tracks – SCAN  
Radio mode............................ 12  
Switching to radio mode ................ 12  
RDS function (only FM) ................. 12  
Selecting the waveband /  
memory bank................................. 13  
Tuning into a station....................... 13  
Setting the sensitivity of station  
seek tuning.................................... 13  
Storing stations ............................. 14  
Storing stations automatically  
(Travelstore) .................................. 14  
Listening to stored stations ............ 14  
Scanning receivable stations  
(not in MP3 browse mode) ............ 26  
Repeating individual tracks or  
whole directories – REPEAT  
(SCAN) ......................................... 14  
Setting the scanning time .............. 14  
Programme type (PTY) .................. 15  
Optimising radio reception............. 16  
(not in MP3 browse mode) ............ 26  
Pausing playback (PAUSE)............ 26  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
CD-changer mode ................. 27 Equalizer ................................ 34  
Switching to CD-changer mode..... 27 Switching the equalizer on/off ........ 34  
Selecting CDs............................... 27 Selecting sound presets ................ 34  
Selecting tracks ............................ 27 Selecting vehicle presets ............... 34  
Fast searching (audible) ................ 27 Automatic equalizer calibration  
Changing the display ..................... 28 (only Acapulco MP54) ................... 35  
Repeating individual tracks or  
Manually adjusting the equalizer..... 36  
whole CDs (REPEAT).................... 28 Help adjusting the equalizer ........... 37  
Random track play (MIX) ............... 28  
Scanning all tracks on all CDs  
Adjusting the display settings 38  
Switching the bar graph on/off....... 38  
(SCAN) ......................................... 29  
Switching the power meter on/off .. 38  
Pausing playback (PAUSE)............ 29  
Adjusting the display brightness..... 38  
Naming CDs ................................. 29  
Adjusting the viewing angle ........... 39  
CLOCK time ........................... 31  
Setting the display illumination  
Displaying the time ........................ 31 colour (only Acapulco MP54)......... 39  
Setting the clock automatically....... 31  
Setting the clock manually ............. 31  
Selecting 12/24-hour clock mode .. 31  
External audio sources .......... 41  
Switching the AUX input on/off ...... 41  
Specifications ........................ 42  
Displaying the time continuously  
Amplifier........................................ 42  
when the device is off and the  
Tuner............................................. 42  
ignition is on .................................. 32  
CD ................................................ 42  
Pre-amp out .................................. 42  
Sound..................................... 32  
Adjusting the bass ......................... 32  
Input sensitivity .............................. 42  
Adjusting the treble ....................... 32  
Setting the left/right volume  
distribution (balance) ..................... 33  
Adjusting the front/rear volume  
distribution (fader) ......................... 33  
X-BASS .................................. 33  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES AND ACCESSORIES  
Road safety  
Notes and accessories  
Thank you for choosing a Blaupunkt  
product. We hope you enjoy using this  
new piece of equipment.  
Road safety has absolute prior-  
ity. Only operate your car sound sys-  
tem if the road and traffic conditions  
allow you to do so. Familiarise your-  
self with the device before setting off  
on your journey.  
Please read these operating instruc-  
tions before using the equipment for  
the first time.  
You should always be able to hear  
police, fire and ambulance sirens in  
good time from inside your vehicle.  
For this reason, listen to your car  
sound system at a suitable volume  
level during your journey.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the device,  
please contact your dealer or the tele-  
phone hotline for your country. You will  
find the telephone number printed at the  
back of this booklet.  
Installation  
If you want to install your car sound sys-  
tem yourself, please read the installa-  
tion and connection instructions that  
follow these operating instructions.  
We provide a manufacturer guarantee  
for our products bought within the Eu-  
ropean Union. You can view the guar-  
or ask for them directly at:  
Accessories  
Only use accessories approved by Blau-  
punkt.  
Blaupunkt GmbH  
Hotline  
Robert Bosch Str. 200  
Remote control  
The optional RC08 or RC10 remote  
control allows you to access the most  
important functions of your car sound  
system safely and conveniently from  
your steering wheel.  
31139 Hildesheim  
Germany  
You cannot switch the device on/off us-  
ing the remote control.  
Amplifiers  
You can use all Blaupunkt and Velocity  
amplifiers.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES AND ACCESSORIES  
CONTROL PANEL  
Detachable control panel  
Theft protection  
CD changers  
You can connect the following Blaupunkt  
CD changers:  
The device is equipped with a detacha-  
ble control panel (flip-release panel) as  
a way of protecting your equipment  
CDC A 08, IDC A 09 and CDC A 03.  
Compact Drive MP3  
You can connect the Compact Drive against theft. The device is worthless  
MP3 instead of a CD-changer in order to a thief without this control panel.  
to play MP3 music tracks. If you decide  
Protect your device against theft by tak-  
to connect a Compact Drive MP3, you  
ing the control panel with you whenev-  
will first need to use a computer to store  
er you leave your vehicle. Do not leave  
the MP3 music tracks on the Micro-  
the control panel inside your vehicle -  
drive™ hard disk that is inside the Com-  
not even in a hiding place.  
pact Drive MP3. Then, when the Com-  
The control panel has been designed  
pact Drive MP3 is connected to the car  
to be easy to use.  
sound system, you can play the tracks  
like normal CD music tracks.  
Note:  
The Compact Drive MP3 is operated in  
a similar way to a CD-changer. Most of  
the CD-changer functions can also be  
used with the Compact Drive MP3.  
Never drop the control panel.  
Never expose the control panel to  
direct sunlight or other heat sourc-  
es.  
Activating / deactivating demo  
mode  
Avoid direct skin contact with the  
control panel’s electrical contacts. If  
necessary, clean the contacts with  
a lint-free cloth and some alcohol.  
The device is supplied from the factory  
with demo mode activated. The various  
functions of the device are displayed  
graphically as animations in the display  
during demo mode. You can also deac-  
tivate demo mode.  
Detaching the control panel  
Press button  
2.  
The control panel opens out towards  
you.  
Press and hold down the MENU  
button 9 for longer than four sec-  
onds to activate/deactivate demo  
mode.  
Hold the control panel by its right  
side and then pull the control panel  
straight out of the bracket.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROL PANEL  
SWITCHING ON/OFF  
Note:  
Switching on/off  
There are various ways of switching the  
device on/off:  
All the current settings are saved.  
Any CD already inserted in the de-  
vice remains there.  
Switching on/off using the vehicle  
ignition  
The device switches off automati-  
cally after approx. one minute.  
The device will switch on/off simultane-  
ously with the ignition if the device is  
correctly connected to the vehicle’s ig-  
nition and you did not switch the device  
off by pressing button 1.  
Attaching the control panel  
Hold the control panel at approxi-  
mately right angles to the device.  
Slide the control panel into the de-  
vice’s guides that are positioned on  
the left and right at the lower edge  
of the housing. Push the control  
panel carefully into the bracket until  
it clicks into place.  
Switching the device on/off using  
the detachable control panel  
Detach the control panel.  
The device switches off automatically  
after approx. one minute.  
Flip up the control panel and care-  
fully press it into the device until it  
clicks into place.  
Attach the control panel again.  
The device switches on. The last set-  
ting (radio, CD, CD changer orAUX) will  
be reactivated.  
Switching on/off using button 1  
To switch on the device, press but-  
ton 1.  
2.  
1.  
To switch off the device, press and  
hold down button 1 for longer  
than two seconds.  
Note:  
When attaching the control panel,  
make sure you do not press the  
display.  
The device switches off.  
Note:  
To protect the vehicle battery, the  
device will switch off automatically  
after one hour if the ignition is off.  
If the device was still switched on when  
you removed the control panel, it will  
automatically switch on with the last  
setting activated (radio, CD/MP3, CD  
changer or AUX) when the panel is re-  
placed.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE VOLUME  
Adjusting the volume  
You can adjust the volume in steps from  
0 (off) to 50 (maximum).  
Risk of injury! If the power-on vol-  
ume is set to maximum, the volume  
level can be very high when the de-  
vice is switched on.  
If the volume was set to maximum  
before the device was switched off  
and the power-on volume is set to  
“LAST VOLUME”, the volume level  
can be very high when the device is  
switched on again.  
To increase the volume,  
turn the volume control 5 clock-  
wise.  
To decrease the volume,  
turn the volume control 5 anti-  
clockwise.  
Severe damage to your hearing can  
be caused in both cases!  
Setting the power-on volume  
You can set the default volume level at  
which the device plays when it is  
switched on.  
When you have finished making your  
changes,  
press the MENU button 9.  
Press the MENU button 9.  
Instantaneously decreasing the  
volume (mute)  
You can instantaneously decrease the  
volume (mute) to a level preset by you.  
Press the or button 7 repeat-  
edly until “VOLUME MENU” ap-  
pears in the display.  
Press the OK button : to display  
Briefly press button 1.  
“MUTE” appears in the display.  
Cancelling mute  
the volume menu.  
“ON VOLUME” and the currently set val-  
ue are displayed or “LAST VOLUME”  
is displayed.  
To return to your previously set volume  
level,  
Adjust the power-on volume using  
the  
buttons 7.  
briefly press button 1 again.  
To help you adjust the setting more eas-  
ily, the device will increase or decrease  
the volume as you make your changes.  
Telephone audio / navigation  
audio  
If you change the setting to “LAST VOL-  
UME”, the volume when the device  
switches on will be the same as the vol-  
ume level that was set the last time you  
switched the device off.  
If your car sound system is connected  
to a mobile telephone or a navigation  
system, the sound system’s volume will  
be muted as soon as you “pick up” the  
phone or as soon as a navigation an-  
nouncement is made. You will then hear  
the caller or navigation announcement  
over the car sound system’s loudspeak-  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE VOLUME  
ers. In order for this feature to work, the  
mobile telephone or navigation system  
must be connected to the car sound  
system as described in the installation  
instructions.  
Setting the volume of the  
confirmation beep  
The system will output a confirmation  
beep for some functions if you keep a  
button pressed down for longer than two  
seconds, for instance, when assigning  
a radio station to a station preset but-  
ton. You can adjust the volume of this  
beep.  
You will need a cable for this with the  
following Blaupunkt number: 7 607 001  
503.  
You can find out from your Blaupunkt  
dealer which navigation systems can be  
used with your car sound system.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “VOLUME MENU” ap-  
pears in the display.  
You can set the volume level at which  
telephone calls and navigation an-  
nouncements will initially be heard.  
Press the OK button : to display  
Press the MENU button 9.  
the volume menu.  
Press the or button 7 repeat-  
edly until “VOLUME MENU” ap-  
pears in the display.  
Press the or button 7 repeat-  
edly until “BEEP VOL” appears in  
the display.  
Press the OK button : to display  
Adjust the volume using the  
buttons 7. “0” means that the  
beep is deactivated, “6” means that  
the maximum beep volume is set.  
the volume menu.  
Press the or button 7 repeat-  
edly until “PHONE/NAVI” appears  
in the display.  
When you have finished making your  
changes,  
Set your preferred volume level us-  
ing the  
buttons 7.  
press the MENU button 9.  
When you have finished making your  
changes,  
Automatic sound  
press the MENU button 9.  
This feature automatically adjusts the  
volume of the car sound system to suit  
the speed at which the vehicle is travel-  
ling. In order for this to work, your car  
sound system must be connected as  
described in the installation instructions.  
Note:  
You can use the volume control 5  
to adjust the volume of telephone  
calls and navigation announce-  
ments whilst you are listening to  
them.  
You can adjust the automatic volume  
boost feature in six steps from (0 to 5).  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
ADJUSTING THE VOLUME  
Press the MENU button 9.  
Radio mode  
Press the button 7 repeatedly  
until “VOLUME MENU” appears in  
the display.  
This device is equipped with an RDS  
radio receiver. Many of the receivable  
FM stations broadcast a signal that not  
only carries the programme but also  
additional information such as the sta-  
tion name and programme type (PTY).  
Press the OK button : to display  
the volume menu.  
Press the or button 7 repeat-  
edly until “AUTO SOUND” appears  
in the display.  
The station name appears in the dis-  
play as soon as the tuner receives it.  
Set the volume adjustment level  
Switching to radio mode  
If you are in CD/MP3, CD-changer or  
AUX mode,  
(0 - 5) using the  
buttons 7.  
When you have finished making your  
changes,  
press the FMTS button 4 for FM  
press the MENU button 9.  
radio mode.  
Or  
Note:  
The optimum setting (0 - 5) for the  
speed-dependent volume adjust-  
ment feature depends on how  
noise levels develop in your partic-  
ular vehicle. You will need to test  
various settings in order to find out  
which is best suited to your vehicle.  
press the AM button = for AM ra-  
dio mode.  
RDS function (only FM)  
The RDS function extends your radio’s  
range of functions. If the RDS function  
is activated, the device automatically  
tunes into the best receivable frequen-  
cy for the station that is currently set.  
Switching the RDS function on/off  
To use the RDS function,  
press the RDS button 3.  
The RDS function is active when RDS  
lights up in the display.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Selecting the waveband /  
memory bank  
Setting the sensitivity of station  
seek tuning  
Selecting the waveband / memory bank You can choose whether the radio  
You can use this device to receive pro- should only tune into stations providing  
grammes broadcast over the FM and good reception or whether it can also  
AM wavebands. There are three mem- tune into those with a weak reception.  
ory banks (FM1, FM2 and FMT) for the  
Press the MENU button 9.  
FM waveband and two memory banks  
“TUNER MENU” appears in the display.  
(AM and AMT) for the AM waveband.  
Press the OK button : to display  
Six stations can be stored in each mem-  
ory bank.  
the tuner menu.  
Press the or button 7 repeat-  
edly until “SENS” appears in the  
display.  
To switch between the FM1, FM2 and  
FMT memory banks,  
briefly press the FMTS button 4.  
The display shows the currently set sen-  
sitivity level. “SENS HI3” means that the  
tuner is set to the highest sensitivity  
setting. “SENS LO1” means it is set to  
the lowest sensitivity setting.  
To switch between the AM and AMT  
memory banks,  
briefly press the AM button =.  
Tuning into a station  
There are various ways of tuning into a  
station.  
Set the sensitivity level that you  
want using the  
buttons 7.  
When you have finished making your  
changes,  
Automatic station seek tuning  
Press the or button 7.  
press the MENU button 9.  
The radio tunes into the next receiva-  
ble station.  
Note:  
You can set different sensitivity lev-  
els for FM and AM.  
Tuning into stations manually  
You can also tune into stations manual-  
ly.  
Note:  
You can only tune into stations  
manually if the RDS function is de-  
activated.  
Press the or button 7.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Storing stations  
Scanning receivable stations  
(SCAN)  
Storing stations manually  
You can use the scan function to play  
all the receivable stations briefly. You  
can set the scanning time in the menu  
to between 5 and 30 seconds.  
Select the memory bank that you  
want: FM1, FM2, FMT or AM, AMT.  
Tune into the station that you want.  
Press and hold down one of the  
station buttons 1 - 3 6 or 4 - 6 ;  
for longer than two seconds to as-  
sign the station to that button.  
Starting SCAN  
Press and hold down the OK but-  
ton : for longer than two sec-  
onds.  
Storing stations automatically  
(Travelstore)  
You can automatically store the six sta-  
tions offering the best reception in the  
region. The stations are stored in the  
FMT or AMT memory bank.  
Scanning begins. “SCAN” appears  
briefly in the display followed by a flash-  
ing display of the current station name  
or frequency.  
Cancelling SCAN and continuing  
listening to a station  
Note:  
Press the OK button :.  
Scanning stops and the radio continues  
playing the station that it tuned into last.  
Any stations that were previously  
stored in this memory bank are de-  
leted in the process.  
Setting the scanning time  
Press the MENU button 9.  
“TUNER MENU” appears in the display.  
Press and hold down the FM•TS  
button 4 or AM button = for  
longer than two seconds.  
The storing procedure begins. “TRAV-  
EL STORE” appears in the display. Af-  
ter the process is completed, the sta-  
tion stored in location 1 of the FMT or  
AMT memory bank will be played.  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
Press the OK button : to display  
the menu.  
Listening to stored stations  
“SCAN TIME” and the currently set time  
are displayed.  
Select the memory bank.  
Press the station button 1 - 3 6 or  
4 - 6 ; that the station you want  
to listen to is assigned to.  
Set the scanning time that you  
want using the  
buttons 7.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
When you have finished making your  
changes,  
Selecting a programme type and  
starting seek tuning  
press the MENU button 9.  
Press the or button 7.  
The programme type that you selected  
last appears in the display.  
Note:  
The scanning time that you set is  
also applied by the system to scan-  
ning carried out in CD/MP3 mode  
and CD-changer mode.  
If you want to select another pro-  
gramme type, you can do so by  
pressing the or button 7  
whilst this display is visible.  
Programme type (PTY)  
Or  
Besides transmitting the station name,  
some FM stations also provide informa-  
tion on the type of programme that they  
are broadcasting. Your car radio can  
receive and display this information.  
Press one of the buttons 1 - 3 6  
or 4 - 6 ; to select a programme  
type that is assigned to one of  
these buttons.  
The selected programme type appears  
briefly in the display.  
For example, the programme types can  
be:  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
Press the or button 7 to start  
seek tuning.  
The radio will then tune into the next  
station that it finds that corresponds to  
your selected programme type.  
CLASSICS  
You can use the PTY function to select  
stations of a particular programme type.  
Note:  
Switching PTY on/off  
If the tuner does not find a station  
that corresponds to the selected  
programme type, you will hear a  
beep and “NO PTY” appears briefly  
in the display. The radio will then  
retune to the station that it received  
last.  
Press the MENU button 9.  
“TUNER MENU” appears in the display.  
Press the OK button : to display  
the tuner menu.  
“PTY” and the current setting appear in  
the display.  
Press the or button 7 to  
switch PTY ON or OFF.  
Press the OK button :.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Assigning a programme type to a  
station button  
Switching bandwidth during  
interference (SHARX)  
Select a programme type using the  
or button 7.  
The SHARX function allows you to  
largely avoid interference caused by  
neighbouring radio stations (FM only).  
Switch on the SHARX function if the  
density of radio stations in your area is  
very high.  
Press and hold down the station  
button 1 - 3 6 or 4 - 6 ; that you  
want for longer than two seconds.  
The programme type will then be as-  
signed to the selected button 1 - 3 6  
or 4 - 6 ;.  
Switching SHARX on/off  
Press the MENU button 9.  
“TUNER MENU” appears in the display.  
Optimising radio reception  
Press the OK button : to display  
Treble reduction feature during  
interference (HICUT)  
the tuner menu.  
Press the or button 7 repeat-  
edly until “SHARX” appears in the  
display.  
The HICUT function improves reception  
during poor radio reception (only FM).  
If interference occurs, the system auto-  
matically reduces the treble thus reduc-  
ing the interference level.  
Press the or button 7 to  
switch SHARX on/off.  
“SHARX OFF” means automatic band-  
width switching is deactivated, “SHARX  
ON” means it is activated.  
Switching HICUT on/off  
Press the MENU button 9.  
“TUNER MENU” appears in the display.  
Press the MENU button 9.  
Press the OK button : to display  
Configuring the display  
the tuner menu.  
You have the option in radio mode of  
displaying the frequency / radio text or  
the frequency / radio text and the time  
in the lower display area. You can also  
make the system show just the station  
name (if receivable) in the entire display.  
Press the or button 7 repeat-  
edly until “HICUT” appears in the  
display.  
Press the or button 7 to ad-  
just the HICUT setting.  
“HICUT 0” means that no automatic re-  
duction of the interference level will be  
made; “HICUT 2” means that a maxi-  
mum reduction will be made.  
Briefly press the DIS•ESC button  
8 to switch between the options.  
Press the MENU button 9.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Naming radio stations (only FM) Activating/deactivating the radio  
text display  
This device allows you to give stored  
radio stations their own name. The  
name can be up to eight characters  
long. This name is displayed in the sec-  
ond line of the display beneath the fre-  
quency. You can only give stations a  
name that you have stored together with  
their frequency and which do not already  
have their own RDS name.  
Some stations use the RDS signal to  
broadcast scrolling texts known as ra-  
dio texts. You can allow radio texts to  
be displayed or you can block them.  
Press the MENU button 9.  
“TUNER MENU” appears in the display.  
Press the OK button : to display  
the tuner menu.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “R-TEXT” appears in the  
display.  
“TUNER MENU” appears in the display.  
Press the OK button : to display  
the tuner menu.  
Press the or button 7 to  
Press the or button 7 repeat-  
edly until “STATION NAME” ap-  
pears in the display.  
switch radio text on/off.  
“R-TEXT OFF” means that no radio  
texts will be displayed and “R-TEXT ON”  
means they will be displayed.  
Press the button 7.  
You will now enter editing mode. The  
currently set name is displayed and the  
first text input position flashes.  
Press the MENU button 9.  
Use the  
/
buttons 7 to select  
the character that you want. If you  
want an empty space, simply se-  
lect the underscore.  
Use the or button 7 to move  
from one text input position to an-  
other.  
Press the MENU button 9.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
CD mode  
You can use this device to play stand-  
ard audio CDs, CD-Rs and CD-RWs  
with a diameter of 12 cm. To avoid prob-  
lems when playing CDs, you should not  
burn CDs at speeds greater than 16-  
speed.  
Note:  
If the device was switched off be-  
fore you inserted the CD, you will  
first have to switch on the device  
by pressing button 1 in order to  
start playing the CD.  
If a CD is already inserted in the  
drive,  
Besides being able to play audio CDs  
on this device, you can also play CDs  
containing MP3 music files. For further  
information, please read the chapter  
entitled “MP3 mode”.  
press the SRC button @ repeated-  
ly until “CD” appears in the display.  
Playback begins from the point at which  
it was last interrupted.  
Risk of severe damage to the  
CD drive!  
Selecting tracks  
Press one of the arrow buttons 7  
CD singles with a diameter of 8 cm  
and non-circular contoured CDs  
(shape CDs) must not be used.  
We accept no responsibility for any  
damage to the CD drive that may  
occur as a result of the use of un-  
suitable CDs.  
to select the next or previous track.  
If you press the or button 7 once,  
the player will play the current track  
again from the beginning.  
Fast track selection  
To quickly select tracks backwards or  
forwards,  
Switching to CD mode  
press and hold down one of the  
buttons 7 until fast-reverse /  
/
If there is no CD inserted in the  
drive,  
fast-forward track selection begins.  
press the  
button 2.  
The flip-release panel opens.  
Fast searching (audible)  
Gently insert the CD with its printed  
side uppermost into the drive until  
you feel some resistance.  
To fast search backwards or forwards,  
press and hold down one of the  
buttons 7 until fast searching  
backwards / forwards begins.  
The drive draws in the CD automatical-  
ly.  
Random track play (MIX)  
You must not hinder or assist the drive  
as it draws in the CD.  
Press the 4 MIX button ;.  
Gently close the control panel  
whilst exerting a little pressure until  
you feel it click into place.  
“MIX CD ON” appears briefly in the dis-  
play and the MIX symbol lights up. The  
next randomly selected track will then  
be played.  
The CD starts playing.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
Cancelling MIX  
Cancelling REPEAT  
If you want to cancel the repeat func-  
tion,  
Press the 4 MIX button ; again.  
“MIX CD OFF” appears briefly in the  
display and the MIX symbol disappears.  
press the 5 RPT button ; again.  
“RPT TRK OFF” appears briefly in the  
display and the RPT symbol disappears.  
Normal playback is then resumed.  
Scanning tracks (SCAN)  
You can scan (briefly play) all the tracks  
on the CD.  
Pausing playback (PAUSE)  
Press the 6 button ;.  
“PAUSE” appears in the display.  
Press and hold down the OK but-  
ton : for longer than two sec-  
onds.  
The next track will then be scanned.  
Cancelling pause  
Note:  
Press the 6 button ; while in  
You can set the scanning time. For  
further information, please read the  
section entitled “Setting the scan-  
ning time” in the “Radio mode”  
chapter.  
pause mode.  
Playback is resumed.  
Changing the display  
You can choose from various display  
options in CD mode:  
Cancelling SCAN and continuing  
listening to a track  
“NORMAL MODE”:  
First line: Track number  
Second line: Playing time  
To stop scanning, press the OK  
button :.  
“INFO MODE”:  
The currently scanned track will then  
continue to be played normally.  
First line: Track number and play-  
ing time.  
Second line: CD text or CD name  
Repeating tracks (REPEAT)  
If you want to repeat a track,  
press the 5 RPT button ;.  
“RPT TRK ON” appears briefly in the  
display and the RPT symbol lights up.  
The track is repeated continuously until  
you deactivate RPT.  
“CLOCK TIME”:  
First line: Track number and play-  
ing time.  
Second line: CD text or CD name  
and clock time  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
Note:  
Press the OK button :.  
In the menu you can configure  
whether you want to display the  
CD text or the CD name. For fur-  
ther information, please read the  
following section entitled “Display-  
ing CD text”.  
Press the or button 7 repeat-  
edly until “CD TEXT” or “CD  
NAME” appears in the display.  
Use the  
buttons 7 to switch  
between the “CD TEXT” and “CD  
NAME” options.  
CD text can only be displayed if the  
appropriate information is con-  
tained on the CD. The CD name  
can only be displayed if you have  
already named the CD. For further  
information, please read the sec-  
tion entitled “Naming CDs”.  
When you have finished making your  
changes,  
press the MENU button 9.  
Scrolling CD text  
If the CD that is inserted in the drive  
contains CD text, you can make the  
system display the text as scrolling text  
during playback.  
To switch between the display options,  
press the DIS•ESC button 8 once  
or several times until the display  
that you want appears.  
Briefly press the 1 SCL button 6.  
Naming CDs  
Displaying CD text/CD name  
The car sound system allows you to  
assign names for up to 30 CDs so that  
you can recognise them more easily.  
The names can be up to eight charac-  
ters long. “CD NAME FULL” will appear  
in the display if you try assigning more  
than 30 names.  
Some CDs include CD text. The CD text  
might contain the names of the artist,  
album and tracks.  
The CD text is displayed in the second  
line of the display instead of the CD  
name. You can allow the CD text to be  
displayed as scrolling text every time  
you switch to another track. The default  
display will appear again after the whole  
CD text has been shown once. For fur-  
ther information, please read the sec-  
tion entitled “Changing the display”.  
Entering/editing CD names  
Listen to the CD that you want.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
Switching CD text on/off  
Press the MENU button 9.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
Press the or button 7 repeat-  
edly until “CD NAME EDIT” ap-  
pears in the display.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
Press the OK button :.  
You can return to the menu by  
pressing the MENU button 9.  
You will now enter editing mode. If your  
CD does not have a name yet, “ABC-  
DEFGH” appears in the display.  
Deleting all CD names  
You can delete all the CD names stored  
in the car sound system.  
The first text input position flashes.  
Use the  
/
buttons 7 to select  
Listen to a CD.  
the character that you want. If you  
want an empty space, simply se-  
lect the underscore.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
Use the or button 7 to move  
from one text input position to an-  
other.  
Press the OK button :.  
When you have finished making your  
changes,  
Press the or button 7 repeat-  
edly until “CD NAME EDIT” ap-  
pears in the display.  
press the OK button :.  
Press the OK button :.  
Deleting a CD name  
Press and hold down the MENU  
button 9. After four seconds you  
will hear a beep and “DELETE  
NAME” appears in the display.  
Continue holding the button  
Listen to the CD whose name you  
want to delete.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
pressed down until you hear a sec-  
ond beep and “DELETE ALL” ap-  
pears in the display.  
Press the OK button :.  
Let go of the MENU button 9.  
The CD names will be deleted.  
Press the or button 7 repeat-  
edly until “CD NAME EDIT” ap-  
pears in the display.  
You can return to the menu by  
pressing the MENU button 9.  
Press the OK button :.  
Press and hold down the MENU  
button 9. After four seconds you  
will hear a beep and “DELETE  
NAME” appears in the display.  
Let go of the MENU button 9.  
The CD name will be deleted.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
MP3 MODE  
Ejecting a CD  
MP3 mode  
Press the  
The flip-release panel opens out to-  
wards you.  
button 2.  
You can also use this car sound sys-  
tem to play CD-Rs and CD-RWs that  
contain MP3 music files.  
MP3 is a process developed by the  
Fraunhofer Institute for compressing CD  
audio data. Compression allows data to  
be reduced to around 10% of their orig-  
inal size without a noticeable loss in  
quality (at a bit rate of 128 kbit/s). If a  
lower bit rate is used to convert CD au-  
dio data to MP3, you will be able to cre-  
ate smaller files but this will be accom-  
panied by a loss in audio quality.  
Press the eject button A next to  
the CD compartment.  
The CD is ejected.  
Remove the CD and close the con-  
trol panel.  
Note:  
If a CD is ejected, the drive will au-  
tomatically draw it back in again af-  
ter 10 seconds.  
Preparing an MP3-CD  
You can also eject CDs whilst the  
device is switched off or whilst an-  
other audio source is activated.  
The various combinations of CD burn-  
ers, CD burning software and CD blanks  
may lead to problems arising with the  
device’s ability to play certain CDs. If  
problems occur with your own burned  
CDs, you should try another brand of  
CD blank or choose another colour of  
CD blank. To avoid problems when play-  
ing CDs, you should not burn CDs at  
speeds greater than 16-speed.  
The format of the CD must be ISO 9660  
Level 1 / Level 2 or Joliet. Other formats  
cannot be played reliably.  
You can create a maximum of 253 di-  
rectories on a CD. You can use this de-  
vice to access each of these directo-  
ries.  
Regardless of the number of directories  
on the CD, the device can handle up to  
65,535 MP3 files on a single CD - even  
if they are all stored in one directory.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 MODE  
This device supports as many subdirec- Note:  
tories as your burner software can cre- When naming directories and  
ate despite the fact that the maximum  
directory depth defined by the ISO 9660  
standard is only 8.  
tracks/files you should avoid using  
accents and special characters.  
You can use a maximum of 32  
characters (including the “.MP3” file  
extension) for track names and di-  
rectory names.  
D
i
r
D01  
If you like your files to be in the correct  
order, you should use burner software  
that places files in alphanumerical or-  
der. If your software does not provide  
this feature you also have the option of  
sorting the files manually. To do so, you  
should place a number (e.g. “001”,  
“002”, etc.) at the beginning of each file  
name - you must include the leading  
zeros.  
e
c
t
D02  
D03  
o
r
i
e
s
D04  
T001  
T001  
T002  
T003  
T004  
T005  
T002  
T003  
T004  
T005  
T006  
T007  
T008  
T009  
T010  
T011  
T
r
a
c
k
s
¥
F
i
MP3 tracks can contain additional in-  
formation such as the artist, album and  
track names (ID3 tags). This device can  
display ID3 tags (version 1). When cre-  
ating (encoding) MP3 files from audio  
files, you should use bit rates up to a  
maximum of 256 kbits/sec.  
T001  
T002  
T003  
T004  
T005  
T006  
l
e
s
This device can only play MP3 files that  
have the “.MP3” file extension.  
You can name each directory using a  
PC. The device is capable of displaying  
the directory name. Name the directo-  
ries and tracks/files using your CD burn-  
er software. The software’s instruction  
manual will provide details on how to  
do this.  
Notes:  
To ensure uninterrupted playback,  
do not try changing the file exten-  
sion to “.MP3” of any files other  
than MP3 files and then attempt to  
play them! The device will ignore  
these invalid files during playback.  
Do not use “mixed” CDs containing  
both non-MP3 data and MP3  
tracks (the device only reads MP3  
files during MP3 playback).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 MODE  
Do not use mix-mode CDs contain- Note:  
ing both CD-audio tracks and MP3  
tracks. If you try playing a mix-  
mode CD, the device will only play  
the CD-audio tracks.  
You can use MP3 browse mode to  
find MP3 files on your CD quickly  
and conveniently. You cannot use  
the fast search, MIX, SCAN or  
REPEAT functions whilst in MP3  
browse mode.  
Switching to MP3 mode  
MP3 mode is activated in the same way  
as normal CD mode. For further infor-  
mation, please read the section entitled  
“Switching to CD mode” in the “CD  
mode” chapter.  
4. “TRACK AND DIR MODE”:  
First line: Track number and play-  
ing time.  
Second line: Directory number  
5. “CLOCK MODE”:  
Configuring the display  
First line: Directory number and  
track number.  
Second line: CD text or CD name  
and clock time  
Configuring the default display  
You can display various types of infor-  
mation on the current track:  
To switch between the different display  
options,  
1. “NORMAL MODE”:  
First line: Track name  
press the DIS•ESC button 8.  
Second line: Directory name  
Selecting a directory  
2. “INFO MODE”:  
First line: Track name.  
Second line: MP3-ID TAG (if avail-  
able and activated, see “Selecting  
MP3 info”).  
Selecting a directory using the  
arrow buttons (Normal, info, track  
and dir and clock mode)  
To move up or down to another directory,  
Note:  
press the or button 7 once or  
The system can display MP3-ID  
tags (version 1) if they have been  
saved with the MP3 files (for further  
information, please read the in-  
structions that came with your PC’s  
MP3 software or burner software).  
several times.  
Note:  
The device will automatically skip  
any directories that do not contain  
MP3 files. The device will automati-  
cally correct the number of directo-  
ries for the display. This number  
might therefore no longer be identi-  
cal to the number of directories that  
you actually created.  
3. “MP3 BROWSE MODE”:  
First line: Directory name  
Second line: Track name.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 MODE  
Selecting the directory in browse  
mode  
Selecting tracks in browse mode  
Browse mode conveniently allows you  
to view the tracks contained in a direc-  
tory and then select a particular track.  
You can display the current and subse-  
quent directory in both lines of the dis-  
play. The directories are displayed with  
the names that you created when burn-  
ing the CD. Whilst the directories are  
being displayed, you can use the arrow  
buttons to display and select all the  
available directories.  
During MP3 playback, repeatedly  
press the DIS•ESC button 8 until  
“MP3 BROWSE MODE” is dis-  
played.  
Press the or button 7 to dis-  
play all the tracks contained in the  
directory one after another.  
During MP3 playback, press the  
DIS•ESC button 8 repeatedly un-  
til “MP3 BROWSE MODE” appears  
in the display.  
If you want to select the currently  
displayed track, press the OK but-  
ton :.  
Press the or button 7 to dis-  
play the directories on the CD.  
Fast searching  
(not in MP3 browse mode)  
To fast search backwards or forwards,  
If you want to select a directory,  
press one of the  
/
buttons 7  
repeatedly until the directory is  
shown in the top line of the display  
and then press the OK button ;.  
press and hold down the or  
button 7 until fast searching back-  
wards / forwards begins.  
The selected directory opens and the  
first track starts playing. The tracks con-  
tained in the directory are displayed in  
browse mode.  
Random track play – MIX  
(not in MP3 browse mode)  
To play the tracks in the current directo-  
ry in random order,  
Selecting tracks  
briefly press the 4 MIX button ;.  
“MIX DIR” appears in the display and  
the MIX symbol lights up.  
Selecting tracks/files using the  
arrow buttons (Normal, info, track  
and dir and clock mode)  
To play the tracks contained in all the  
directories on the inserted MP3-CD in  
random order,  
To move up or down to another track/  
file in the current directory,  
press the or button 7 once or  
press the 4 MIX button ; again.  
several times.  
“MIX CD” appears in the display and the  
MIX symbol lights up.  
If you press the button 7 once, the  
current track will be played again from  
the beginning.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 MODE  
Cancelling MIX  
Repeating individual tracks or  
whole directories – REPEAT  
(not in MP3 browse mode)  
To cancel MIX,  
briefly and repeatedly press the 4  
MIX button ; until “MIX OFF” ap-  
pears in the display.  
To play the current track repeatedly,  
briefly press the 5 RPT button ;.  
“REPEATTRACK” appears briefly in the  
display and RPT lights up.  
The MIX symbol disappears.  
Scanning tracks – SCAN  
(not in MP3 browse mode)  
To repeat the whole directory,  
press the 5 RPT button ; again.  
“REPEAT DIR” appears briefly in the  
display.  
You can scan (briefly play) all the tracks  
on the CD.  
Press and hold down the OK but-  
ton : for longer than two sec-  
onds. The next track will then be  
scanned.  
Cancelling REPEAT  
To stop the current track or current di-  
rectory from being repeated,  
“SCAN” and the selected display mode  
appear alternately in the display (see  
“Configuring the display”).  
briefly and repeatedly press the 5  
RPT button ; until “REPEAT  
OFF” appears in the display.  
Note:  
RPT disappears from the display.  
You can set the scanning time. For  
further information on setting the  
scanning time, please read the  
section entitled “Setting the scan-  
ning time” in the “Radio mode”  
chapter.  
Pausing playback (PAUSE)  
Press the 6 button ;.  
“PAUSE” appears in the display.  
Cancelling pause  
Cancelling SCAN and continuing  
listening to a track  
Press the 6 button ; while in  
pause mode.  
Briefly press the OK button :.  
Playback is resumed.  
The currently scanned track will then  
continue to be played normally.  
Selecting MP3 info  
If you want to select the “MP3 INFO”  
display mode, you first have to activate  
this function in the menu.  
In order for the system to be able to dis-  
play MP3 information, the information  
must be stored on the CD in the form of  
ID tags together with the MP3 files.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 MODE  
CD CHANGER MODE  
Press the MENU button 9.  
CD-changer mode  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
Note:  
Information on handling CDs, in-  
serting CDs and operating the CD  
changer can be found in the oper-  
ating instructions supplied with  
your CD changer.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “MP3 INFO” appears in  
the display.  
Switching to CD-changer mode  
Use the  
buttons 7 to switch  
between the “ON” and “OFF” op-  
Press the SRC button @ repeat-  
edly until “CDC” appears in the dis-  
play.  
tions.  
When you have finished making your  
changes,  
The device starts playing the first CD  
that the CD changer detects.  
press the MENU button 9.  
Selecting CDs  
Displaying scrolling text  
To move up or down to another CD,  
The selected information (track, album  
or file name and directory name) is dis-  
played once as scrolling text when the  
track changes. To display the informa-  
tion again as scrolling text,  
press the or button 7 once or  
several times.  
Note:  
The device will ignore empty CD  
slots in the changer and slots con-  
taining invalid CDs.  
briefly press the 1 SCL button 6.  
Selecting tracks  
To move up or down to another track  
on the current CD,  
press the or button 7 once or  
several times.  
Fast searching (audible)  
To fast search backwards or forwards,  
press and hold down one of the  
buttons 7 until fast searching  
backwards / forwards begins.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD CHANGER MODE  
Changing the display  
You can choose from various display  
options in CD-changer mode:  
Repeating individual tracks or  
whole CDs (REPEAT)  
To repeat the current track,  
“NORMAL MODE”:  
briefly press the 5 RPT button ;.  
“REPEAT TRACK” appears briefly and  
RPT lights up in the display.  
First line: Track number  
Second line: CD number / CD  
name and playing time  
To repeat the current CD,  
“CLOCK MODE”:  
press the 5 RPT button ; again.  
“REPEAT CD” appears briefly and RPT  
lights up in the display.  
First line: Track number.  
Second line: CD number / CD  
name and clock time  
“MINIMAL MODE”:  
First and second line: Track  
number.  
Cancelling REPEAT  
To stop the current track or current CD  
from being repeated,  
To switch between the display options,  
repeatedly press button 5 RPT ;  
until “REPEAT OFF” appears in the  
display and RPT disappears.  
press the DIS•ESC button 8.  
In the menu you can choose to display  
the CD name (if available) instead of  
the CD number. (For further information,  
please read the “Naming CDs” section):  
Random track play (MIX)  
To play the tracks on the current CD in  
random order,  
Press the MENU button 9.  
briefly press the 4 MIX button ;.  
“MIX CD” appears briefly and MIX lights  
up in the display.  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
Press the OK button :.  
To play the tracks on all inserted CDs in  
random order,  
Press the or button 7 repeat-  
edly until “CD NAME” or “DISC  
press the 4 MIX button ; again.  
NUMBER” appears in the display.  
“MIXALL” appears briefly and MIX lights  
up in the display.  
Use the  
buttons 7 to switch  
between the “CD NAME” and  
Cancelling MIX  
“DISC NUMBER” options.  
Briefly and repeatedly press the 4  
MIX button ; until “MIX OFF” ap-  
pears in the display and MIX disap-  
pears.  
When you have finished making your  
changes,  
press the MENU button 9.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD CHANGER MODE  
Scanning all tracks on all CDs  
(SCAN)  
To scan (briefly play) all the tracks on  
all the inserted CDs in ascending order,  
Naming CDs  
The car sound system allows you to  
assign names for up to 30 CDs so that  
you can recognise them more easily.  
The names can be a maximum of sev-  
en characters long.  
press and hold down the OK but-  
ton : for longer than two sec-  
onds.  
“CD NAME FULL” will appear in the dis-  
play if you try assigning more than 30  
names.  
“SCAN” and the selected display mode  
appear alternately in the display.  
Entering/editing CD names  
Listen to the CD that you want.  
Press the MENU button 9.  
Stopping SCAN  
To stop scanning,  
briefly press the OK button :.  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
The currently scanned track will then  
continue to be played normally.  
Note:  
Press the OK button :.  
You can set the scanning time. For  
further information, please read the  
section entitled “Setting the scan-  
ning time” in the “Radio mode”  
chapter.  
Press the or button 7 repeat-  
edly until “CD NAME EDIT” ap-  
pears in the display.  
Press the OK button :.  
Pausing playback (PAUSE)  
Press the 6 button ;.  
“PAUSE” appears in the display.  
You will now enter editing mode. If your  
CD does not have a name yet, “ABC-  
DEFG” appears in the display.  
The currently active text input position  
flashes.  
Cancelling pause  
Press the 6 button ; while in  
Use the  
/
buttons 7 to select  
pause mode.  
the character that you want. If you  
want an empty space, simply se-  
lect the underscore.  
Playback is resumed.  
Use the or button 7 to move  
from one text input position to an-  
other.  
When you have finished making your  
changes,  
press the MENU button 9.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD CHANGER MODE  
Deleting a CD name  
Press and hold down the MENU  
button 9. After four seconds you  
will hear a beep and “DELETE  
NAME” appears in the display.  
Continue holding the button  
Listen to the CD whose name you  
want to delete.  
Press the MENU button 9.  
pressed down until you hear a sec-  
ond beep and “DELETE ALL” ap-  
pears in the display.  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
Let go of the MENU button 9.  
All CD names will be deleted.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “CD NAME EDIT” ap-  
pears in the display.  
Press the OK button : to return to  
the menu.  
Press and hold down the MENU  
button 9. After four seconds you  
will hear a beep and “DELETE  
NAME” appears in the display.  
Let go of the MENU button 9.  
The CD name will be deleted.  
You can return to the menu by  
pressing the MENU button 9.  
Deleting all CD names  
You can delete all the CD names stored  
in the car sound system.  
Listen to a CD.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “CD NAME EDIT” ap-  
pears in the display.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK TIME  
Press the or button 7 repeat-  
edly until “CLOCK SET” appears in  
the display.  
CLOCK time  
Displaying the time  
You can make the clock time appear  
continuously in the bottom part of the  
display while any audio source is acti-  
vated. For further information, please  
Press the OK button :.  
The time appears in the display.  
The hours flash and can be adjusted.  
read the “Configuring the display” sec- Set the hours using the  
/
but-  
tions in the relevant chapters.  
tons 7.  
Once the hours are set,  
press the button 7.  
The minutes flash.  
Setting the clock automatically  
You can configure the system to set the  
clock time automatically using the RDS  
signal.  
Set the minutes using the  
buttons 7.  
/
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “CLOCK MENU” appears  
in the display.  
Press the OK button : and then  
the MENU button 9.  
Selecting 12/24-hour clock  
mode  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “CLOCK AUTO” or  
“CLOCK MANUAL” appears in the  
display.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “CLOCK MENU” appears  
in the display.  
Select the “CLOCK AUTO” setting  
using the or button 7.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “24 HOUR MODE” or  
“12 HOUR MODE” appears in the  
display.  
Press the MENU button 9.  
The menu appears again.  
Setting the clock manually  
To set the clock time manually,  
press the MENU button 9.  
Press the or button 7 to  
switch between the modes.  
When you have finished making your  
changes,  
Press the or button 7 repeat-  
edly until “CLOCK MENU” appears  
in the display.  
press the MENU button 9.  
Press the OK button :.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK TIME  
SOUND  
Displaying the time continuously  
when the device is off and the  
ignition is on  
To display the time when the device is  
off and the vehicle ignition is on,  
Sound  
You can adjust the sound settings (bass  
and treble) separately for each source  
(radio, CD/MP3, CD changer, AUX, tel-  
ephone/navigation). The volume distri-  
bution settings (balance and fader) ap-  
ply to all the audio sources.  
press the MENU button 9.  
Press the or button 7 repeat-  
edly until “CLOCK MENU” appears  
in the display.  
Note:  
You can only adjust the audio set-  
tings for traffic announcements and  
the navigation system whilst a traf-  
fic announcement or navigation an-  
nouncement is actually playing.  
Likewise, you can only adjust the  
telephone audio settings during a  
telephone call.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “OFF CLOCK OFF” or  
“OFF CLOCK ON” appears in the  
display.  
Press the or button 7 to  
switch between the ON/OFF set-  
tings.  
Adjusting the bass  
Press the AUDIO button >.  
“BASS” appears in the display.  
When you have finished making your  
changes,  
Press the or button 7 to ad-  
press the MENU button 9.  
just the bass.  
Press the AUDIO button > to  
close the menu or press the  
/
button 7 to make further changes  
to the settings.  
Adjusting the treble  
Press the AUDIO button >.  
Press the or button 7 repeat-  
edly until “TREBLE” appears in the  
display.  
Press the or button 7 to ad-  
just the treble.  
Press the AUDIO button > to  
close the menu or press the  
/
button 7 to make further changes  
to the settings.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND  
X-BASS  
Setting the left/right volume  
distribution (balance)  
To adjust the left/right volume distribu-  
tion (balance),  
X-BASS  
The X-BASS feature can be used to  
boost the bass at low volume levels.  
Adjusting the X-BASS boost  
press the AUDIO button >.  
“BASS” appears in the display.  
The X-BASS boost can be set in steps  
ranging from 1 to 6 for one of the fol-  
lowing frequencies: 32 Hz, 40 Hz,  
50 Hz, 63 Hz or 80 Hz.  
Press the or button 7 repeat-  
edly until “BALANCE” appears in  
the display.  
“LEVEL 0” means that no X-BASS boost  
will be applied, and “LEVEL 6” means  
that X-BASS will be boosted by the  
maximum amount.  
Press the or button 7 to ad-  
just the balance (right/left).  
Press the AUDIO button > to  
Press the AUDIO button >.  
“BASS” appears in the display.  
close the menu or press the  
/
button 7 to make further changes  
to the settings.  
Press the or button 7 repeat-  
edly until “X-BASS” appears in the  
display.  
Adjusting the front/rear volume  
distribution (fader)  
To adjust the front/rear volume distribu-  
tion (fader),  
Press the OK button :.  
The X-Bass menu is displayed. The fre-  
quency flashes.  
press the AUDIO button >.  
“BASS” appears in the display.  
Press the or button 7 to set  
the frequency that you want.  
Press the or button 7 repeat-  
edly until “FADER” appears in the  
display.  
Press the button 7.  
The boost level flashes.  
Press the or button 7 to set  
Press the or button 7 to ad-  
the boost level that you want.  
just the fader (front/rear).  
When you have finished making your  
changes,  
Press the AUDIO button > to  
close the menu or press the  
/
button 7 to make further changes  
to the settings.  
press the AUDIO button >.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Equalizer  
The Casablanca MP54 is fitted with a  
digital DEQ Max equalizer. TheAcapul-  
co has a DEQ Max EX equalizer.  
Press the OK : button and then  
the DEQ button ?.  
Selecting sound presets  
You can select sound presets for the  
following music types.  
This means you have three 5-band  
equalizers, six sound presets and sev-  
en vehicle presets at your disposal.  
POP  
ROCK  
You can also configure the EQ1 - EQ3  
equalizers manually.  
TECHNO  
JAZZ  
TheAcapulco MP54 additionally allows  
you to calibrate an equalizer automati-  
cally. You can obtain the calibration mi-  
crophone necessary for this from acces-  
sory retailers.  
CLASSIC  
SPEECH  
The settings for these music styles have  
already been programmed.  
The following bands are available:  
Press the DEQ button ?.  
LOW 1  
LOW 2  
HIGH 1  
HIGH 2  
HIGH 3  
20 - 250 Hz  
Press the or button 7 repeat-  
edly until “SOUND PRESETS” ap-  
pears in the display.  
20 - 250 Hz  
315 - 20 000 Hz  
315 - 20 000 Hz  
315 - 20 000 Hz  
Press the OK button :.  
Repeatedly press the or button  
7 until the sound preset that you  
want is displayed.  
Switching the equalizer on/off  
To switch the equalizer on/off,  
press the DEQ button ?.  
Press the DEQ button ?.  
The equalizer menu appears in the dis-  
play.  
The settings are saved.  
Selecting vehicle presets  
To activate the equalizer,  
You can choose from optimised equal-  
izer settings for the following vehicle  
types.  
select one of the sound presets or  
adjust the equalizer manually. For  
further information, please read the  
sections that follow in this chapter.  
COMPACT  
4DOOR  
CONVERT  
VAN  
ROADSTER  
MINI  
To deactivate the equalizer,  
press the or button 7 repeat-  
edly until “EQ OFF” appears in the  
display.  
TRUCK  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
The settings for these vehicle types Really quiet surroundings are required  
have already been programmed.  
for the calibration.Any extraneous noise  
will distort the measured values.  
Press the DEQ button ?.  
The windows, doors and sunroof must  
remain closed during the calibration  
process. You should be seated in the  
driving seat throughout this procedure.  
Press the or button 7 repeat-  
edly until “CAR PRESETS” ap-  
pears in the display.  
Press the OK button :.  
Note:  
Repeatedly press the or button  
7 until the vehicle type that you  
want is displayed.  
You can obtain the calibration micro-  
phone necessary for this from acces-  
sory retailers.  
Press the DEQ button ?.  
The settings are saved.  
During calibration, the temperature in-  
side the vehicle must not exceed 55 °C  
since this could lead to falsified meas-  
urements.  
Automatic equalizer calibration  
(only Acapulco MP54)  
The sound radiating from the loud-  
speakers must not be obstructed by any  
objects. All the loudspeakers must be  
connected. The microphone must be  
connected to the device.  
You can electronically calibrate and  
store values for three different situations,  
e.g.:  
EQ 1 for the driver only  
EQ 2 for the driver and front passen-  
ger  
To calibrate the automatic equalizer,  
EQ 3 for the front and rear occupants press the DEQ button ?.  
Hold the calibration microphone in the  
appropriate position whilst calibration is  
taking place.  
Press the or button 7 repeat-  
edly until “MANUAL EQ” appears in  
the display.  
The position of the calibration micro-  
phone for Situation 1 (e.g. for the driver  
alone) is at the height of the driver’s  
head, approx. 10 cm next to the right  
ear.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until the equalizer that you  
want to calibrate (“USER EQ1”,  
“USER EQ2” or “USER EQ3”) ap-  
pears in the display.  
For Situation 2, the calibration micro-  
phone should be positioned at head  
height between the driver and the front  
passenger.  
Press the OK button : twice.  
Press the ESC button 8.  
For Situation 3, you should position the  
calibration microphone at head height  
in the centre of the vehicle interior (left/  
right, front/rear).  
Press the or button 7 repeat-  
edly until “AUTO EQ” appears in  
the display.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Press the or button 7 repeat-  
edly until the equalizer that you  
want to configure (“USER EQ1”,  
“USER EQ2” or “USER EQ3”) ap-  
pears in the display.  
Press the OK button :.  
A countdown is shown in the display.  
Afterwards you will hear a test sound  
and calibration begins.  
Note:  
Press the OK button :.  
Follow the instructions shown in the dis-  
play during calibration!  
Press the or button 7 repeat-  
edly until the equalizer band that  
you want to configure (“LOW EQ1”,  
“LOW EQ2”, “HIGH EQ1”, “HIGH  
EQ2” or “HIGH EQ3”) appears in  
the display.  
Manually adjusting the equalizer  
Notes on adjusting the settings  
We recommend you use a CD that you  
are familiar with for making changes to  
the settings.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until the frequency that you  
want is displayed.  
Before adjusting the equalizer, set the  
sound and volume distribution settings  
to zero and deactivate X-BASS. For fur-  
ther information, please read the  
“Sound” chapter.  
Press the OK button :.  
The top line displays the GAIN and the  
quality factor “Q”. The gain setting flash-  
es. You can use the quality factor to set  
the width of the filter. The higher you  
set the value for the quality factor the  
more directly the filter will be applied to  
the selected frequency.  
Listen to a CD.  
What kind of impression does the  
sound make?  
Now refer to the “Sound impres-  
sion” column in the table entitled  
“Help adjusting the equalizer”.  
To adjust the gain,  
press the or button 7.  
To adjust the quality factor,  
press the button 7.  
The quality factor setting flashes.  
Adjust the equalizer values as de-  
scribed in the “Measures” column.  
Making adjustments  
Press the DEQ button ?.  
Press the or button 7 repeat-  
edly until the setting that you want  
is displayed.  
Press the or button 7 repeat-  
edly until “MANUAL EQ” appears in  
the display.  
Press the OK button :.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Note:  
Please note that you can boost or  
reduce one frequency in each  
equalizer band. Proceed in the way  
described above with all the equal-  
izer bands that you want to adjust.  
Press the OK button : or the  
DEQ button ? to close the menu.  
The settings are saved.  
Help adjusting the equalizer  
Sound Impression / problem  
Measures  
Bass sound is too weak  
Increase bass with  
Frequency: 32 to 160 Hz  
Gain: +4 to +6 dB  
Dirty bass  
Booming sound  
Unpleasant pressure  
Reduce the lower mid level with  
Frequency: 400 Hz  
Gain: approx. -4 dB  
Sound very much in the foreground,  
aggressive, no stereo effect.  
Reduce the mid level with  
Frequency: 1,000 to 2,500 Hz  
Gain: -4 to -6 dB  
Dull sound  
Little clarity  
No brilliance to the instruments  
Boost the treble range with  
Frequency: 6,300 to 10,000 Hz  
Gain: +2 to +4 dB  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE DISPLAY SETTINGS  
Press the or button 7 repeat-  
Adjusting the display  
settings  
edly until “PWR METER” appears  
in the display alongside the current  
setting (“ON” or “OFF”).  
Switching the bar graph on/off  
You also have the option of switching  
off the bar graph in the bottom line of  
the display.  
Press the or button 7 to  
switch between the settings.  
Press the MENU button 9.  
Press the MENU button 9.  
Adjusting the display brightness  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
The display brightness will change when  
the headlights are turned on/off if your  
car sound system is connected as de-  
scribed in the installation instructions  
and your vehicle is equipped with the  
appropriate connection. You can adjust  
the display brightness separately for  
night and day in steps ranging from  
1 - 16.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “BARGRAPH” appears in  
the display alongside the current  
setting (“ON” or “OFF”).  
Press the or button 7 to  
switch between the ON and OFF  
settings.  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “DISPLAY MENU” ap-  
pears in the display.  
Press the MENU button 9.  
Switching the power meter on/  
off  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “DAY” or “NIGHT” ap-  
pears in the display with the current  
setting.  
The power meter (level display) in the  
bottom line of the display can be used  
indicate the relative output power of the  
car sound system (PWR METER ON)  
or the volume level (PWR METER  
OFF).  
Press the or button 7 to  
switch between the brightness lev-  
els.  
Press the MENU button 9.  
When you have finished making your  
changes,  
Press the or button 7 repeat-  
edly until “VARIOUS MENU” ap-  
pears in the display.  
press the MENU button 9.  
Press the OK button :.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE DISPLAY SETTINGS  
Adjusting the viewing angle  
Press the OK button :.  
You can adjust the display’s viewing  
angle to suit the installation position of  
the device in your vehicle.  
Press the or button 7 repeat-  
edly until “DISPLAY COLOR” ap-  
pears in the display.  
Press the MENU button 9.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “DISPLAY MENU” ap-  
pears in the display.  
Press the or button 7 repeat-  
edly until the colour that you want  
is displayed.  
Press the OK button :.  
When you have finished making your  
changes,  
Press the or button 7 repeat-  
edly until “ANGLE” appears in the  
display with the current setting.  
press the OK : button and then  
the MENU button 9.  
The settings are saved.  
Press the or button 7 to ad-  
just the viewing angle.  
Mixing a colour for the display  
illumination  
When you have finished making your  
changes,  
To customise the display illumination to  
suit your tastes you can mix a colour  
yourself using the three primary colours  
red, blue and green.  
press the MENU button 9.  
Setting the display illumination  
colour (only Acapulco MP54)  
Press the or button 7 repeat-  
edly until “DISPLAY MENU” ap-  
pears in the display.  
When setting the display illumination,  
you can choose one of four preset col-  
ours or you can mix a colour yourself  
from the RGB spectrum (red-green-  
blue) or you can select a colour during  
a colour scan.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “DISPLAY COLOR” ap-  
pears in the display.  
Selecting a preset colour  
Press the OK button :.  
Four different colours are already stored  
in the device. “Ocean” (blue), “Amber”,  
“Sunset” (red-orange) and “Nature”  
(green) are available. Select a colour  
that best suits your vehicle interior.  
Press the or button 7 repeat-  
edly until “USER COLOR” appears  
in the display.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “DISPLAY MENU” ap-  
pears in the display.  
The menu for mixing your own colour is  
displayed. The top line displays “R”, “G”  
and “B” with the current values. The “R”  
setting flashes.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE DISPLAY SETTINGS  
Mixing the button illumination  
colour (only Acapulco MP54)  
Press the or button 7 repeat-  
edly until the setting that you want  
is displayed.  
You can mix your own button/key illu-  
mination colour using the two primary  
colours red and green.  
Press the or button 7 to  
move the selection marker to the  
position after the other colours.  
Press the or button 7 repeat-  
edly until “DISPLAY MENU” ap-  
pears in the display.  
Adjust the other colour compo-  
nents to suit your preferences.  
Press the OK button :.  
When you have finished making your  
changes,  
Press the or button 7 repeat-  
edly until “KEY COLOR” appears in  
the display.  
press the OK : button and then  
the MENU button 9.  
The settings are saved.  
Press the OK button :.  
The menu for mixing your own colour is  
displayed. The top line displays “R” for  
red and “G” for green with the current  
values. The “R” setting (red) flashes.  
Selecting a display illumination  
colour during a colour scan  
Press the or button 7 repeat-  
edly until “DISPLAY MENU” ap-  
pears in the display.  
Press the or button 7 repeat-  
edly until the value that you want is  
displayed.  
Press the OK button :.  
Press the or button 7 repeat-  
edly until “DISPLAY COLOR” ap-  
pears in the display.  
Press the button 7 to move the  
selection marker to the position af-  
ter “G”.  
Press the OK button :.  
Adjust the green colour component  
to suit your preferences.  
Press the or button 7 repeat-  
edly until “COLOR SCAN” appears  
in the display.  
When you have finished making your  
changes,  
The device starts changing the display  
illumination colour.  
press the MENU button 9.  
The settings are saved.  
If you want to select one of the colours,  
press the OK : button and then  
the MENU button 9.  
The settings are saved.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL AUDIO SOURCES  
When you have finished making your  
changes,  
External audio sources  
In addition to the CD changer, you can  
also connect another external audio  
source equipped with a line output. If  
no CD changer is connected to the de-  
vice, you can connect two external au-  
dio sources. Audio sources can, for ex-  
ample, be portable CD players, MiniDisc  
players or MP3 players.  
press the MENU button 9.  
Note:  
If the AUX input is switched on, you  
can select it by pressing the SRC  
button @.  
The AUX input must be activated in the  
menu.  
If you want to connect an external au-  
dio source, you will need an adapter  
cable.  
You can obtain this cable (Blaupunkt  
no.: 7 607 897 093) from your author-  
ised Blaupunkt dealer.  
Switching the AUX input on/off  
Press the MENU button 9.  
Press the or button 7 repeat-  
edly until “AUX MENU” appears in  
the display.  
Press the OK button :.  
Repeatedly press the or but-  
ton 7 until “AUX2” or “AUX1” ap-  
pears in the display.  
If a CD changer is connected, “AUX1”  
is not available.  
Use the  
buttons 7 to switch  
between the “ON” and “OFF” op-  
tions.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Specifications  
Amplifier  
Output power: 4 x 18 watts sine at  
14.4 V and 1% dis-  
tortion factor at  
4 ohms.  
4 x 26 watts sine in  
accordance with DIN  
45324 at 14.4 V at  
4 ohms.  
4 x 50 watts max.  
power  
Tuner  
Wavebands:  
FM :  
MW :  
LW :  
87.5 - 108 MHz  
531 - 1 602 kHz  
153 - 279 kHz  
FM frequency response:  
35 - 16,000 Hz  
CD  
Frequency response:  
20 - 20,000 Hz  
Pre-amp out  
4 channels:  
4 V  
Input sensitivity  
AUX input:  
2 V / 6 k  
Tel./Navi input: 10 V / 1 kΩ  
Subject to changes!  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service numbers / Numéros du service après-vente /  
Números de servicio / Número de serviço  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
(D)  
0180-5000225  
05121-49 4002  
Austria  
(A)  
(B)  
01-610 390  
02-525 5454  
01-610 393 91  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
Belgium  
Denmark  
Finland  
France  
(DK) 44 898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 0030-210 94 27 337 0030-210 94 12 711  
(IRL) 01-4149400  
01-4598830  
02-369 62464  
40 2085  
(I)  
02-369 62331  
40 4078  
Luxembourg (L)  
Netherlands (NL) 023-565 6348  
023-565 6331  
66-817 157  
01-2185 11111  
916-467952  
08-7501810  
01-8471650  
Norway  
Portugal  
Spain  
(N)  
(P)  
(E)  
(S)  
66-817 000  
01-2185 00144  
902-120234  
08-7501500  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ) 02-6130 0441  
02-6130 0514  
01-324 8756  
022-8771260  
Hungary  
Poland  
(H)  
01-333 9575  
(PL) 0800-118922  
(TR) 0212-3350677  
(USA) 800-2662528  
Turkey  
USA  
0212-3460040  
708-6817188  
Brasil  
(Mercosur)  
(BR) +55-19 3745 2769 +55-19 3745 2773  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
+604-6413 640  
Blaupunkt GmbH  
03/04 TRO  
CM/PSS 8 622 403 890  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Blackberry Cell Phone Blackberry User Manual
Blue Rhino Outdoor Fireplace WAF501C User Manual
Bolens Lawn Mower TMO 33920A User Manual
Braun Electric Shaver 5015 User Manual
Braun Iron 4661 User Manual
Bush Hog Lawn Mower RFM 60 User Guide page
Canon Photo Printer CP220 User Manual
Carrier Smoke Alarm 48 50HG014 028 User Manual
Casio Watch ANA6HST B User Manual
Casio Watch AQF100WD 9BV User Manual