Blaupunkt Car Stereo System RCM 82 User Manual

Operating instructions  
Frankfurt RCM 82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Description  
1 ON/OFF  
5 DSC button (Direct Software Control)  
This button is used for programming  
special functions of your car stereo.  
9 MTL button (metal)  
Switch on the set by turning the knob.  
Volume control:  
by turning the knob  
Press this button when chromium dioxi-  
de (CrO2) or metal cassettes are play-  
ed. Switch off this function by  
pressing the MTL button once again.  
SCAN (search operation):  
Pressing the knob for approx. 1 sec. will  
eithersampletheprogrammestoberecei-  
ved during radio operation or the follow-  
ing CD songs during CD operation (CD  
changer only).  
6 AF button  
When AF is on and RDS activated, the  
radio will automatically tune to a fre-  
quency offering better reception of the  
same programme.  
:
button (Autoreverse)  
Automatic change from one side of the  
tape to the other  
7 lo button  
; Cassette compartment  
2 GEO button (broader interior sound  
impression)  
This button is used for altering the sen-  
sitivity of the automatic station seek  
operation  
lo - normal sensitivity (loG e is indi-  
cated)  
< FR button  
Balance (left/right volume):  
Adjust with rocker switch <</>> I.  
Fader (front/rear volume):  
Fast rewinding of the tape.  
Stop with FF button.  
Adjust with rocker switch  
/
J.  
dx - high sensitivity (loG e disap-  
pears)  
= Cassette eject  
Press both buttons.  
3 AUD button  
Additional function of the lo button:  
Switching from stereo to mono: Press  
for longer than 2 seconds.  
Treble - Reproduction of the high fre-  
quencies  
Adjust with rocker switch <</>> I.  
BASS - Reproduction of the low fre-  
quencies  
> FF button  
Fast forwarding of the tape.  
Stop with FR button.  
8
button (Dolby-NR)  
Use this button to activate noise  
suppression during tape playback.  
Adjust with rocker switch  
/
J.  
? RM button (Radio Monitor)  
Use this button to listen to the radio  
while advancing or rewinding the tape.  
4 LD button (Loudness)  
Press this button to boost the bass fre-  
quencies at low volumes. This will lead to  
a more natural sound impression.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
@ CPS button  
E ARI button  
J
/
rocker switch  
To repeat or skip music tracks on the  
cassette. CPSilluminates on the dis-  
play G o.  
Use this button to reproduce traffic sta-  
tions only.  
Your radio only plays stations which  
broadcast traffic announcements.  
Radio:  
Automatic selection of  
a station  
CD changer (option):  
Pressing rocker switch shortly:  
Skip to next title  
Skip to previous title  
Pressing rocker switch longer:  
A SRC button (Source)  
This button is used for shifting from one F FM•T button (Frequency Modulation)  
audio source to another  
(cassette radio CD cassette).  
FM button  
Cue  
Review  
This button is used for shifting between  
the different FM storage levels I, II, III  
and T (Travelstore).  
B PS button (Preset Station Scan )  
Pressing this button briefly samples all  
memorized stations of the selected  
waveband (FM, MW, LW).  
K Code LED  
G Display  
H KeyCard slot  
C Preset buttons 1, 2, 3, 4, 5, 6  
Store station - Keep button depressed  
during radio operation until the station  
becomes audible again.  
To switch on the set insert KeyCard in  
the direction of the arrow.  
Remove KeyCard: Press on the card.  
Recall station - Briefly press the re-  
spective button.  
I << / >> rocker switch  
Radio:  
Fine tuning of stations  
CD changer (option):  
Selecting a CD >> upwards  
<< downwards  
D M•L button (Medium wave - Long  
wave)  
This button is used for selecting either  
the medium wave (MW) or long wave  
(LW) frequencies.  
Press button again for shifting between  
MW and LW.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Reception of Traffic Programmes with  
RDS-EON ............................................. 26 Connection of e.g. a Cassette or DAT  
Switching Traffic Messages (ARI)  
On and Off ......................................... 27  
Acoustic Alarm................................... 27  
Automatic Start of the Station Seek  
Operation ........................................... 27  
Changing the Audio Source with SRC .. 30  
Important Notes............................ 22  
What You Should Read By All Means! . 22  
Safety Notes ......................................... 22  
KeyCard ................................................ 22  
Wrong KeyCard ................................. 22  
KeyCard Lost ..................................... 22  
Telephone Connection ...................... 22  
Player .................................................... 30  
Programming with DSC ............... 30  
Adjusting the Volume of Traffic Messages  
(ARI) ...................................................... 30  
Acoustic Signal after the Actuation of a  
Key (BEEP) ........................................... 31  
Choosing the Display Colour ................ 31  
Theft Protection by Code LED .............. 31  
Loudness .............................................. 31  
Preset Naming ...................................... 31  
Sensitivity of the Automatic Station Seek  
Operation .............................................. 32  
Survey of DSC Settings Adjusted Ex  
Tape Section................................. 27  
Amplifier Section.......................... 23  
Inserting the Tape ................................. 27  
Removing the Tape............................... 27  
Fast Forwarding and Rewinding the Tape  
(FF/FR) ................................................. 27  
Radio Reception during FF or FR  
ON/OFF ................................................ 23  
Balance and Fader................................ 23  
Controlling Treble and Bass.................. 23  
Switching from Stereo to Mono ............. 24  
Loudness .............................................. 24  
Operation .............................................. 28  
Autoreverse  
Radio Section ............................... 24  
(Changing the Tape Side) ..................... 28  
Dolby-NR .............................................. 28  
Tape Selection ...................................... 28  
Changing the Audio Source with SRC .. 28  
Skipping/Repeating Tracks with CPS ... 28  
Care Notes ............................................ 29  
Factory .................................................. 32  
AF - alternative frequency ..................... 24  
Selecting the Desired Waveband.......... 24  
Tuning in a Station Automatically.......... 24  
Manual Tuning ...................................... 25  
Reception of regional stations (FM) ...... 25  
Adjusting the Station Seek Sensitivity... 25  
Memorizing a Station ............................ 25  
Automatically Storing the Strongest  
Stations ................................................. 25  
Activating a Stored Station.................... 26  
Briefly Sampling a Station ..................... 26  
Sampling Memorized Stations with PS . 26  
Appendix ....................................... 33  
Technical Data ...................................... 33  
What To Do If Your Car Stereo Needs  
Service? ................................................ 33  
CD Changer (Option) ................... 29  
Playing a CD ......................................... 29  
Changing the CD .................................. 29  
Skipping/Repeating a Track  
(Cue/Review) ........................................ 30  
Briefly Sampling a Track ....................... 30  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Notes  
Due to the high output power of the output Switchingthecarstereooffduringthewaiting  
stage, the metal housing of the set may heat period will set the waiting time to zeroafter  
up considerably. Therefore never touch this the unit has been activated again.  
What You Should Read By All  
Means!  
Beforestartingtouseyournewcarradio, you metal enclosure when removing the unit.  
should carefully read through the safety no-  
KeyCard Lost  
tes and the information about the KeyCard.  
KeyCard  
If you have lost your KeyCard or if it was  
damaged, oneofourauthorizedservicepart-  
ners will help you against presentation of  
your car radio passport.  
Your car radio is theft-protected and cannot  
Safety Notes  
beoperatedwithouttheKeyCard. Therefore,  
Beingthedriverofamotorvehicleyoushould other people cannot make use of your set.  
dedicateyourfullattentiontothetrafficaround Since it is not possible to utilize the car radio  
you. Therefore always use your car stereo with another KeyCard, it will be of no worth at  
such that you are able to cope with the all for a thief - in case the KeyCard was  
These service partners are designated by  
(
) intheradiosserviceregister. Ifrequired,  
call the service centre of your country for  
detailed information about your local Key-  
Card service facility.  
present traffic situation in any moment.  
In difficult driving situations you should turn  
your set off. Please take into account that at  
a speed of 50 km/h you are almost covering  
a distance of 14 m per second!  
When adjusting the volume, always make  
sure that acoustic signals from the outside  
can still be heard in order to be able to react  
to alert signals just as it is required by the  
present situation.  
If you would like to mount or expand the unit  
by yourself, you should by all means read  
through the enclosed mounting and con-  
nection instructions before.  
Do not connect the loudspeaker outputs to  
ground!  
removed before.  
Wrong KeyCard  
Telephone Connection  
If a wrong KeyCard is inserted, four dashes  
are first represented on the display (----)  
beforetheindicationchangestoCARDERR.  
Duringthisperiodthesetcannotbeoperated  
even with the right KeyCard.  
Whenoperatingacartelephoneinyourvehic-  
le, radio, CD or cassette reproduction can be  
muted automatically.  
For this, however, the car telephone must be  
connected to the unit just as it is described in  
the connection instructions.  
Remove the false card. Now the correct  
card has to be inserted by all  
means.  
After the third false try it will take one hour  
before the set can be operated with the  
correct card. In the meantime, ----is indica-  
ted on the display.  
After another 7 wrong attempts, the car ste-  
reo can only be put in operation by one of our  
authorized service partners. For this, the car  
radio passport has to be presented.  
Only use the accessory and replacement  
parts approved by Blaupunkt.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Amplifier Section  
Press the rocker switch <</>> I left/  
right. The sound of the left and right  
channel is balanced; the number on the  
display changes between -9 and +9.  
The display indication automatically  
stops at 0(= sound of the left and right  
channel is balanced).  
Controlling Treble and Bass  
ON/OFF  
Treble Control  
For controlling the high frequencies:  
For switching the set on,  
turn button 1 clockwise and  
Press the TREB button 3.  
insert the KeyCard completely.  
The display G a gives you TRE or  
BAS and a number between -6 and +6.  
Your stereo is now ready for operation.  
For switching the set off,  
Press the upper part of the rocker  
switch <</>> I for boosting the treble  
or the lower part for treble reduction.  
The number on the display changes  
between -6 and +6. It will automatically  
stop at the 0position (normal).  
turn button 1 counterclockwise or  
Fader  
For balancing the sound level front/rear (Fa-  
der):  
remove the KeyCard H.  
First press on the KeyCard (to release  
it) and then take it out of the slot.  
Press the GEO button 2.  
The display G a gives you BAL (Ba-  
lance) or FAD (Fader) plus a number  
between -9 and +9.  
Balance and Fader  
Bass Control  
With two loudspeakers installed, you can  
balance the sound impression left/right; with  
four speakers available, you can also adjust  
the sound pattern of the front and rear level  
(fader).  
The balance and fader function is activated  
by pressing the GEO button 2.  
For controlling the low frequencies:  
Press the rocker switch  
/
J up/  
down. The sound of the front and rear  
channel is balanced; the number on the  
display changes between -9 and +9.  
The display indication automatically  
stops at 0(= sound of the front and  
rear channel is balanced).  
Press the BASS button 3.  
The display G a gives you BAS or  
TRE and a number between -7 and +7.  
Press rocker switch <</>> I to the  
right for boosting the basses or to the  
left for bass reduction.  
Theadjustmentisterminatedbypressingthe  
GEO button 2 once again; otherwise, the  
display will automatically return to indication  
of radio or cassette functions approx. eight  
seconds after the last setting has been car-  
ried out.  
The number on the display changes  
between -7 and +7. It will automatically  
stop at the 0position (normal).  
Balance  
For balancing the sound level left/right:  
Press the GEO button 2.  
The display G a gives you BAL (Balan-  
ce) or FAD (Fader) plus a number bet-  
ween -9 and +9.  
Thetrebleandbassadjustmentisterminated  
bypressingtheBASSorTEBbutton3 once  
again; otherwise, the display will automati-  
cally return to indication of radio or cassette-  
functions approx. eight seconds after the last  
setting has been carried out.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Section  
Switching from Stereo to Mono  
Selecting FM  
In the FM mode, we generally recommend to  
make use of the RDS service.  
Briefly press the FMT button F.  
FMlights up on the display G b.  
For switching from stereo to mono:  
As soon as a programme can be identified,  
the station logo and possibly the regional  
identification, e.g. the German NDR1 NDS  
(for Lower Saxony) appear on the display.  
Withe RDS, the preset buttons become pro-  
gramme buttons. Now you know exactly  
which programme your set has currently tu-  
nedin,makingit thusveryeasytochoosethe  
desired station.  
Press the lo button 7 for more than  
two seconds.  
For stereo reproduction, the stereo sign  
will light up on the display G f.  
When switching the unit on, stereo sound  
reproduction is adjusted.  
Selecting MW or LW  
Briefly press the ML button D.  
Mfor MW or Lfor LW lights up on the  
display G b.  
For changing between MW and LW:  
When the signal strength gets poor, the set  
will automatically switch to mono.  
Press ML D once again.  
If nothing else is indicated, the following  
operating notes hold for all wavebands.  
Loudness  
AF - Alternative Frequency  
TheAFfunction(AlternativeFrequency)pro-  
vides that the car stereo automatically tunes  
in to the programme frequency which offers  
the best reception quality.  
This function is on, if AF lights up on the  
display G h.  
At low volumes, the human ear shows redu-  
ced sensitivity to low frequencies, while me-  
dium and high frequencies can be perceived  
better.  
Theloudnessfunctioncompensatesthisphe-  
nomenon by boosting the low frequencies.  
For activating or deactivating it:  
Tuning in a Station Automatical-  
ly  
Tuning in the Following Station  
Press the upper part of the rocker  
switch  
/
J.  
Switch AF on/off by  
The car stereo automatically starts  
searching for the next station.  
pressing the AF button 6.  
Press the LD button 4.  
If the loudness is on, LDis shown on  
the display G i.  
You can individually programme at which  
level you want the set to start boosting the  
basses (see chapter Programming).  
The radio reproduction is muted for a mo-  
ment while searching for the frequency offe-  
ring the best reception quality of a program-  
me.  
Tuning in the Previous Station  
Press the lower part of the rocker  
switch  
/
J.  
The car radio automatically starts sear-  
ching for the previous station.  
Selecting the Desired Waveband  
Withyourcarradioyouhavefreechoicefrom  
the following wavebands:  
FM(ultra-shortwave;frequency-modulated),  
MW (medium wave), and LW (long wave).  
If the rocker switch  
/
J up/down is  
kept depressed, the station seek opera-  
tion continues to be carried out quickly  
in the corresponding direction.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For memorizing a station:  
Manual Tuning  
Adjusting the Station Seek  
Sensitivity  
Choose the storage level (only FM); for  
this, press FMT F until I, II, III, or T is  
lit on the display G c.  
All stations can also be tuned in manually:  
Press the rocker switch <</>> I on  
the left or the right. The frequency band  
is scanned in small steps.  
You can change the seek tuning sensitivity in  
.
the FM and M L range.  
Tune in the station (see chapter Auto-  
For receiving only powerful nearby stations  
(low sensitivity),  
matic/Manual Tuning of Stations).  
Press the desired preset button C until  
the radio resumes play (approx. 2 se-  
conds) or BEEP is audible.  
press the lo button 7 until loillumi-  
nates on the display G e.  
If you would also like to search for weaker  
stations (higher sensitivity):  
Reception of Regional Programs  
(FM)  
From the display G d you can see  
which button is currently pressed.  
Many of the programs of the broadcasting  
corporarations are split up into regional pro-  
grams at certain times. For example, the first  
program of NDR (Northern German Broad-  
casting) provides the northern Federal Ger-  
man States of Schleswig-Holstein, Hamburg  
and Lower Saxony with differing regional  
programs at times.  
Press button lo 7 once again.  
The loindication goes out in the dis-  
play G e.  
The sensitivity level can be further varied in  
both modes (see chapter Programming).  
Now the station is stored.  
Note:  
When tuning in an already stored station, the  
display G c will show the corresponding  
preset button for approx. three seconds. In  
addition, for FM, the display G d will also  
give you the storage level.  
Memorizing a Station  
If you receive a regional station and would  
like to continue listening so that station:  
You can memorize a station with each of the  
preset buttons C.  
Keep the AF button 6 depressed for  
longer than 2 seconds, until the display  
G j briefly shows REG. The regional  
function is activated.  
ForFM, eachpreset buttonC canbealloca-  
ted four times, i.e. four stations can be stored  
on one button. The display G c shows you  
thecorrespondingassignments(I,II,IIIstand  
for first,second,andthirdallocation;Tstands  
for Travelstore (for Travelstore information  
see the following chapter)).  
Automatically Storing the Stron-  
gest Stations  
This function is deactivated by pressing  
the AF button for longer than 2 seconds  
again. The REGindication disap-  
pears.  
(Travelstore)  
WithTravelstore, youhavetheopportunityto  
automatically store the six strongest FM sta-  
tions of your respective region and have  
themsorted accordingtotheirsignalstrength.  
This feature is of special use while travelling.  
For jumping from one stored station to ano-  
ther:  
Press the FMT button F.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the FMT button F for at least  
two seconds.  
Press the Scan button 1 for approx.  
1 sec.  
If you want to cancel this function:  
Press the PS button B once again.  
The radio keeps playing the sampled  
station.  
The set searches for the strongest FM  
stations and sorts them on the Tstora-  
ge level (Travelstore). Once the pro-  
cess is finished, the car radio automati-  
cally tunes in to the strongest  
station.  
The display G a gives you SCAN. If  
the following station is found, it is repro-  
duced for approximately eight seconds.  
The stations frequency starts blinking  
on the display G a; if it has already  
been memorized, the corresponding  
preset button starts blinking on the dis-  
play G d. In addition, for FM stations,  
the storage level indicator lights up on  
the display G c. Then the set starts  
searching for the next station.  
Reception of Traffic Program-  
mes with RDS-EON  
If required, it is also possible to manually  
storeastationontheTravelstorelevel. Ifless  
than six stations can be received, the free  
buttons are represented by dashes for a  
short moment.  
Various FM broadcasters transmit traffic an-  
nouncements at some time of the day. Your  
radio identifies these traffic programme sta-  
tions and gives the TP indication - Traffic  
Programme - on the display G l. Other radio  
networksdonotairtrafficmessagesbythem-  
selves, but transmit the TP code of another  
radio network with traffic information service  
(e.g. BBC2).  
If the ARI function is activated (ARI illumina-  
tes on the display G n), your radio will auto-  
matically switch to the traffic programme  
station (e.g. GLR) for the duration of the  
traffic announcement and will switch back  
againtothepreviousstation(BBC2)afterthe  
end of the message. Traffic messages are  
put throughwith a preset volume, the level  
of which can be programmed (see chapter  
Programming). The set automatically inter-  
rupts cassette or CD playback and resumes  
play as soon as the message is over.  
For selecting a sampled station:  
Activating a Stored Station  
Press the Scan button 1 once again.  
The Scan function is off.  
If required, the memorized stations can be  
activated at a keystroke.  
After the search operation has been con-  
cluded, and no station has been chosen, the  
radio starts playing the station from which  
Radio Scan was started before.  
Choose the storage level (only FM).  
For this, press FMT F until I, II, III, or  
T lights up on the display G c.  
Briefly press the corresponding preset  
button C.  
Sampling Memorized Stations  
with PS  
Allmemorizedstationsofawavebandcanbe  
briefly sampled.  
Briefly Sampling a Station  
(Radio Scan)  
Press the PS button B.  
Starting with the currently tuned in station,  
you can have the following ones briefly sam-  
pled for approx. eight seconds each.  
The car radio will then start introducing  
all memorized stations of the selected  
waveband one after another.  
If no station is stored on a preset but-  
ton, this button is skipped.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape Section  
Switching Traffic Messages (ARI) On  
Acoustic Alarm  
Inserting a Tape  
When leaving the coverage area of the tuned  
in traffic station, your car radio automatically  
sendsoutanacousticalarmafterapproxima-  
tely 30 seconds.  
This alarm tone can also be heard when  
pressing a preset button with no ARI station  
allocated to it.  
and Off  
If you want to listen to a tape:  
This function allows you to mute all the stati-  
onswhichdonotbroadcasttrafficannounce-  
ments.  
Switch on the set.  
Insert the cassette halfway into the slot  
with side 1 up and without applying  
force; the cassette will be loaded auto-  
matically.  
For switching ARI on and off  
Press the ARI button E.  
If traffic radio is on, ARIlights up on  
the display G n.  
If you press the ARI button when listening to  
atrafficmessage,theARIpriorityisdeactiva-  
tedforthismessage.Theradioswitchesover  
to the operating mode which was activated  
before the traffic message. But ARI priority  
remains activated for the further traffic mes-  
sages.  
For switching off the acoustic alarm,  
The cassette side which was played last will  
be reproduced.  
From the display G a you can see which  
search for a new station (see chapter  
Tuning in a Station Automatically). The  
set will then start searching for the next side is currently played. (TR1 = side 1)  
traffic station.  
Removing the Tape  
Automatic Start of the Station Seek  
To stop tape play:  
Operation  
(cassette playback)  
Press the  
buttons = simulta-  
If your radio is tuned to a station without ARI  
code, the acoustic alarm will be produced  
after approx. 4 seconds.  
neously.  
The cassette is ejected.  
When leaving the coverage area of the tuned  
in traffic station, your car radio will automati-  
cally start searching for a new traffic station  
while you are listening to your cassette.  
During the seek operation, an alarm tone is  
sent out.  
Tune to another station.  
Fast Forwarding and Rewinding  
the Tape (FF/FR)  
When pressing the ARI button while listening  
to an MW or LW station, the unit automatical-  
ly switches to the FM traffic station tuned in  
last.  
Fast Forward Operation  
Press button FF >.  
On the display G a e.g. the << >>’  
symbols illuminates to indicate fast tape  
operation. Once fast forwarding is finis-  
hed, the reversed side will start to play  
automatically.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stopping Fast Forward Operation  
from (TR1-PLAY  
TR2-PLAY).  
Changing the Audio Source with  
SRC  
Press button FR.  
Once the end of the cassette is reached, the  
set automatically switches to the other side.  
You can shift between the connected audio  
sources in the following order:  
Cassette radio cassette  
For switching to another audio source with  
the cassette being inserted:  
Fast Rewind Operation  
Note:  
Press button FR <.  
When using stiff-going cassettes, the set  
may switch over to the other side although  
thisisnotdesired. Whenthishappens, check  
the tape wound up so far; in these cases, fast  
forwarding or rewinding it often helps.  
On the display G a e.g. the << >>’  
symbols illuminates to indicate fast tape  
operation. Once fast rewinding is finis-  
hed, the same side will start to play  
automatically.  
Press the SRC button A.  
The car radio shifts to radio operation.  
Tape play is stopped; the audio head and the  
pinch roller are released. By this, both the  
cassette and the cassette mechanism are  
protected (standby operation).  
Stopping Fast Rewind Operation  
Dolby-NR*  
Press button FF.  
This set allows it to play cassettes which  
have been recorded with Dolby-NR.  
These cassettes distinguish by their reduced  
background noise and improved dynamic  
characteristics.  
Radio Reception during FF or FR  
Operation  
Skipping/Repeating Tracks with  
CPS  
During cassette operation, the radio section  
is off. However, you are free to choose if you  
want to listen to the radio while the tape is  
forwarded or rewound:  
Your car stereo is equipped with a Cassette  
ProgramSearchfeature(CPS).Thisfunction  
detects the beginning of the taped songs,  
and it can be used to fast forward to the  
beginning of the next one or to rewind to the  
beginning of the current song.  
For switching Dolby-NR on or off:  
Press the  
button 8.  
If Dolby NR is on, Billuminates on the  
display G g.  
* Noise reduction system manufactured under license  
from Dolby Laboratories. DOLBYand the double-D sym-  
bol are trademarks of Dolby Laboratories.  
Press the RM button ?.  
When the function is on, RMlights up  
on the display G m.  
Skipping a Track  
For skipping a track,  
Autoreverse  
(Changing the Tape Side)  
Tape Selection  
To play METAL or CrO2 cassettes  
activate CPS using button @, so that  
CPSlights up on the display G.  
If you want to change to the other side of the  
cassette while listening to it:  
press the MTL button 9, MTLlights  
up on the display G k.  
Press this button once again to switch off this  
Press button FF >. On the display  
G a TR1 (or 2) - << >>lights up; the  
tape is fast forwarded.  
Press button  
:.  
The display indication G a) changes  
function. MTLgoes off in the display.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD Changer (Option)  
Having reached the beginning of the next  
song, FF stops and the song is played.  
For normal contamination, use a head- This car radio gives you the opportunity to  
cleaning cassette to remove the dust; for remote control a Blaupunkt CD changer (e.g.  
more intensive contamination, use a cotton- CDC-M1, -M3, -A03*, -F03*).  
Repeating a Track  
If you want to listen to the current song once  
again,  
wool tip soaked with alcohol. Never use hard  
tools!  
For detailed information about how to  
operate the CD Changer, please refer to  
the operating instructions of your changer.  
press button FR <.  
*) Available end 1992  
On the display G a TR1 (or 2) - <<  
>>lights up and the tape is rewound.  
Playing a CD  
Once the beginning of the current song is  
reached, the latter is played again. You can  
still repeat the previous track up to eight  
seconds after the new one has started.  
For listening to a CD, you will have to switch  
to the CD changer:  
Press the SRC button A until either  
the Disc/Track (i.e. CD number/title  
number) or Track/Time (i.e. title num-  
ber/playing time) indication lights up on  
the display G a (see also chapter Pro-  
gramming with DSC).  
Note:  
Itisonlypossibletoskiporrepeatsongsifthe  
in-between blanks are at least three seconds  
long.  
The CD is played.  
Care Notes  
Changing the CD  
We recommend C-60 and C-90 type tapes  
for use in any automobile tape player; to  
protect your tapes, store them in a cool place  
awayfromdirt, dust, orexcessivetemperatu-  
res above 50° Celsius. In order to ensure  
smooth tape operation, cold tapes should be  
allowed to heat up a bit before they are  
played. If dust collects on the audio head or  
the rubber roller, problems related to rough  
tape operation or poor sound quality may  
occur after approx. 100 hours of operation.  
For playing the next CD, proceed as follows:  
Press the rocker switch <</>> I on  
the right.  
For playing the previous CD:  
Press the rocker switch <</>> I on  
the left.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming with DSC  
If you want to keep on listening to the sam-  
pled track:  
Skipping/Repeating a Track  
(Cue/Review)  
The car radios DSC function (Direct Soft-  
ware Control) allows it to adapt several ad-  
justments and functions according to your  
personal preference and to store these indi-  
vidual settings.  
Briefly press the Scan button 1 once  
again for approx. 1 sec.  
For playing the next title  
briefly press the upper part of the ro-  
The Scan function is deactivated and  
the song is continued to play.  
cker switch  
/
J.  
For playing the previous title  
Adjusting the Volume of Traffic  
Messages (ARI)  
briefly press the lower part of the ro-  
Changing the Audio Source with  
SRC  
cker switch  
/
J.  
You can preselect the volume of ARI traffic  
messages (see chapter Traffic Messages).  
For changing the volume,  
You can shift between the connected audio  
sources in the following order:  
Changer cassette radio changer  
For switching to another audio source:  
Cue (Fast Forward)  
Press the upper part of the rocker  
press the DSC button 5.  
The display G a shows BEEP ONor  
BEEP OFF.  
switch  
cond.  
/
J for longer than one se-  
Press the SRC button A.  
The car radio switches over to the next audio Press the rocker switch  
/
J until  
Review (Fast Backward)  
source.  
the display G a gives you ARIand a  
number between 1 and 9 as a volume  
indication.  
Press the lower part of the rocker  
switch  
cond.  
/
J for longer than one se-  
Connection e.g. of a Cassette or  
DAT Player  
The car radios volume is identical to  
the volume of the traffic messages.  
Having connected an external sound system  
(viatheAUXsocket)youcanswitchbetween  
the audio sources using the SRC button A  
(cassette radio externalunit cassette).  
The display G a will give you AUX.  
Briefly Sampling a Track  
For altering the setting,  
press the rocker switch << / >> I  
(left - lower; right - higher).  
CD Scan  
Starting from the track currently played you  
can briefly sample the following tracks of the  
CD for approx. ten seconds each:  
The number on the display is changing  
correspondingly.  
For memorizing your personal adjustment,  
Press the Scan knob 1 approx. 1 sec.  
The display G a will give you SCAN.  
The next track is played.  
press the DSC button 5 once again.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For changing the colour,  
Acoustic Signal after the Actuati-  
on of a Key (BEEP)  
Loudness  
press << / >> I,  
Since your in-car sound quality is influenced  
by the type of the installation (amplifier), the  
type and arrangement of the loudspeakers,  
and the vehicle itself, you may individually  
programme at which level you want the set to  
start boosting the basses (loudness).  
and the display colour will change.  
All functions which require for a keystroke  
longer than two seconds (e.g. memorizing a  
station) are confirmed by an acoustic signal  
(BEEP).  
For storing this adjustment,  
press the DSC button 5 once again.  
Theft Protection by Code LED  
For switching the BEEP tone on or off,  
For changing this loudness level,  
press the DSC button 5.  
The display G a gives you BEEP ON”  
or BEEP OFF.  
As a preventive measure, you can let a light-  
emitting diode (LED) K blink in the cars  
interior when it is parked.  
press the DSC button 5.  
The display G a gives you BEEP ON”  
or BEEP OFF.  
Using the rocker switch << / >> I you  
can select between BEEP ON(acou-  
stic signal on) and BEEP OFF(acou-  
stic signal off).  
For modifying the setting,  
Now press the rocker switch  
/
J
press the DSC button 5.  
The display G a gives you BEEP ON”  
or BEEP OFF.  
until LOUDand a number between 1  
and 6 illuminate on the display G a.  
For memorizing your adjustment,  
With the rocker switch << / >> I you  
can match the above mentioned loud-  
ness level to your personal require-  
ments.  
Press the rocker switch  
/
J until  
press the DSC button 5 once again.  
LEDand a number light up on the dis-  
play G a.  
Choosing the Display Colour  
Via the rocker switch << / >> I, you  
can adjust the following:  
For memorizing this adjustment,  
Withthissetyoucanmatchthedisplaycolour  
to the colour of your vehicles dashboard  
lighting. You can choose between green and  
orange.  
press the DSC button 5 once again.  
LED 0 - Blinking is off.  
LED 1 - LED only blinks if the car  
radio is connected via the  
ignition.  
LED 2 - LED blinks, if the car radio is  
switched off (using the ON/  
OFF-button, KeyCard or  
ignition).  
Preset Naming  
For changing the display colour,  
When you select a station, the display G a  
will give you the frequency and for RDS  
stations also the station name later on, e.g.  
press the DSC button 5.  
The display G a gives you BEEP ON”  
or BEEP OFF.  
91.3  
BBC3. You can replace the frequen-  
cy indication of all preset stations without  
RDS code by entering an 8-digit name.  
Note the following:  
Press the rocker switch << / >> I until  
COLOURlights up on the display  
G a.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The stations must be stored on the storage For modifying the previous character:  
Press the  
/
rocker switch J until  
levels I-III.  
LOCALand a number between 1 and  
3 appear on the display G a.  
LOCAL stands for local reception.  
Press the ON/OFF button 1 for longer  
For entering a station name, proceed as  
follows:  
than two seconds.  
Once you have finished your entry, press the  
Press the DSC button 5.  
The display G a gives you BEEP ON”  
or BEEP OFF.  
corresponding preset button of the next sta- Adjust the sensitivity with the << / >>  
tion, which you would like to be named. The  
entered name for the previous station is then  
automatically stored.  
rocker switch I:  
01 corresponds to high sensitivity  
Press the rocker switch  
/
J until  
03 corresponds to low sensitivity  
For storing the adjustment:  
PRESETis illuminated on the display  
If required, use the rocker switch  
/
J to  
G a.  
Press the DSC button 5 once again.  
Every time the station is selected, the speci-  
fied name will be represented on the display.  
select DIS(distant reception) and change  
the sensitivity.  
For memorizing the setting:  
Choose the desired station (via the  
preset buttons), for which the name is  
to be entered.  
The zone identification for traffic messages Press the DSC button 5 once again.  
(ARI) is no longer indicated.  
Amemorizedstationnamecanbedeletedby  
storing a new station on this button (i.e.  
keepingtherespectivepresetbuttondepres-  
The station frequency, e.g.  
_ _ 92.1_ _  
Survey of DSC settings adjusted  
ex factory  
is indicated on the display G a. The remai-  
ning fields are marked with _. When en-  
tering the first character, the frequency dis-  
appears and is replaced by further dashes.  
The first dash is blinking. For changing it and  
entering the desired character:  
BEEP  
:
ON  
sed for a longer period).  
COLOUR : orange  
Sensitivity of the Automatic  
Station Seek Operation  
LED  
:
:
:
:
:
:
2
LOUD  
PRESET  
LOCAL  
DIS  
3
Press the rocker switch << / >> I on  
---  
1
In areas with an extremely high or very low  
station densitity it might be useful to alter the  
sensitivity of the automatic station seek (lo or  
dx button).  
the right continuously.  
The display will give you one after the other  
the capital letters (A-Z), the umlauts, the  
special characters and the numbers 0-9.  
For selecting a character:  
1
ARI  
5
For changing the sensitivity:  
Press the DSC button 5.  
The display G a gives youBEEP ON”  
or BEEP OFF.  
Press the ON/OFF button 1.  
The selected character stops blinking  
while the next character starts to flash.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
What to Do If Your Car Stereo  
Needs Service?  
Technical Data  
Amplifier  
Whenever your car radio fails to operate  
properly, and therefore needs to be repaired  
by an authorized service centre, please do  
not forget to bring the car radio passport and  
the KeyCard along with you.  
Output power:  
4 x 25 watts RMS acc.  
to DIN 45324/3.1 at 2 Ω  
FM:  
Sensitivity:  
0.9 µV at 26 dB  
signal-to-noise ratio  
Frequency  
response:  
Selectivity:  
35-16 000 Hz (-3 dB)  
> 80 dB at ±300 kHz  
> 40 dB at ±200 kHz  
Crosstalk  
attenuation:  
> 30 dB at 1kHz  
Tape Section:  
Frequency  
response:  
30 - 18 000 Hz (-3 dB)  
Wow-and-flutter: 0.25% typ.  
Signal-to-noise  
ratio:  
64 dB typ. with Dolby B  
56 dB typ. without Dolby  
AUX-IN:  
Preamp-Out:  
Input impedance 10 kΩ  
Output impedance  
150 Ω  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blaupunkt-Werke GmbH  
Bosch Telecom  
6/93 RBMA  
MC/VKD-Hi 3 D92 162 007  
PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Box Network Hardware IC108A User Manual
Black Decker Air Compressor 641915 00 User Manual
Bradford White Corp Water Heater 238 44219 00 User Manual
Cadco Convection Oven XAF User Manual
Canon Camcorder 105 User Manual
Carrier Heating System 48DJD User Manual
Carrier Refrigerator HS070 160 User Manual
Casio Electric Grill XJ S36 User Manual
Casio Electric Heater HR 212 User Manual
Cisco Systems IP Phone 6901 User Manual