Radio / Cassette
Freiburg RCM 148
Siena RCM 148
Louisiana RCM 148
Kingston DJ
St. Louis DJ
Operating instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
The display consists of three fields and changes according to the operating mode and function.
Display field 1:
Display field 2:
Display field 3:
Radio mode
Radio mode
Displays active functions.
Memory banks and wavebands
Brief indication of preset station (e.g. P1)
Radio frequency or station name
PTY programme type
- Stereo
- Cassette inserted
- CD changer connected
LD - Loudness
Cassette mode
Cassette mode
CAS - cassette inserted
TAPE1/TAPE2 - side of tape being played.
Displays active function.
Radio mode
Changer mode
Current track
AF - RDS alternative frequency
PTY - RDS programme type
TA - Priority for traffic information
TP - Traffic programme station
Changer mode
CD number being played by changer.
CD time (elapsed time)
Brief indication of functional changes
Audio
lo
- Seek tuning sensitivity
Numeric and graphic representation of the
volume and audio settings.
CD changer mode
DSC
RPT - Repeat function
MIX - Titles played at random
DSC
Serves as display and entry field during DSC
programming
Clock display
Permanent display for DSC programming.
Graphic representation of the adjusted vol-
ume level.
Miscellaneous
Indicates new source (e.g. when changing
from radio to cassette)
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Contents
Display .......................................... 23
Quick reference ............................ 25
Important notes ............................ 28
Automatically storing the strongest
Cassette deck operation ............. 37
stations with Travelstore....................... 32
Recalling stored stations ...................... 33
Scanning stations with Radio Scan ...... 33
Changing the scan time........................ 33
Selecting the automatic tuning
sensitivity .............................................. 33
PTY - Programme Type........................ 33
Programme types .............................. 33
Switching PTY ON/OFF .................... 34
Checking the programme type of the
station ................................................ 34
Displaying the selected programme
type .................................................... 34
Selecting a programme type ............. 34
Storing programme types.................. 35
Scanning stations with PTY SCAN ... 35
PTY priority........................................ 35
Cassette playback ................................ 37
Cassette eject ....................................... 37
Fast winding.......................................... 37
Reversing the tape ............................... 37
Traffic information during
What you need to know ........................ 28
Traffic safety ......................................... 28
Installation............................................. 28
Warning note ........................................ 28
cassette playback ................................. 37
CD changer operation.................. 38
Switching to the CD changer mode...... 38
Inserting a CD ....................................... 38
Ejecting a CD ........................................ 38
CD playback ......................................... 38
Selecting a CD ...................................... 38
Selecting a title ..................................... 39
SCAN .................................................... 39
RPT ....................................................... 39
MIX....................................................... 39
Clock ............................................. 29
Setting the clock ................................... 29
Release panel ....................................... 29
Theft protection..................................... 29
Fixing the release panel ....................... 30
Selecting the audio mode ........... 30
Radio operation with RDS ........... 31
AF - Alternative frequency .................... 31
REG - regional programme .................. 31
Selecting a waveband .......................... 31
DSC programming ....................... 40
Traffic programme station
reception with RDS-EON ............. 36
Overview of the DSC factory
settings.................................................. 41
Station tuning ........................................ 31 Traffic announcement priority on/off .... 36
Automatic seek tuning .............. 31 Warning beep ....................................... 36
/
Appendix ....................................... 42
Manual tuning with << >>.................. 32
Scrolling through the broadcasting
Switching the warning beep off ......... 36
Automatic seek tuning start
Specifications........................................ 42
networks (FM only) ............................... 32 (Cassette and CD changer operation) . 36
Switching between the memory banks
Adjusting the volume for traffic
(FM) ...................................................... 32 announcements and the warning beep .. 37
Storing stations ..................................... 32
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick reference
3 Volume knob
9 Rocker switch
1 REL
Turn the knob to set the volume.
To release the detachable panel (theft
protection).
Press this knob and remove the
release panel.
4
Eject
Press this button to eject the cassette.
5 Cassette slot
2 ON - Power up/down
Insert the tape into the slot with the
open side showing to the right. The
tape will be played in the direction pre-
viously selected.
Press this button to turn the equipment
on. It will play at the preset volume. If
you press this button briefly during ra-
dio reception, the volume will turn
down instantly (MUTE).
This function is cancelled by pressing
the ON button again. You can pro-
gramme the mute volume (refer to
“DSC programming”).
Radio mode
/
Seek tuning
Up
Down
<</>> Up/down in short intervals
(on FM only if „AF“ is off)
6 Display
Displays all settings, operating modes
and functions.
For FM only:
<</>> Scrolling through the broadcasting
networks, if AF is on. Example:
NDR 1, 2, 4, N-Joy, FFN ...
7 FR Fast Rewind
Press the button for about 2 seconds
to turn the unit off.
To fast rewind the tape.
8 FF Fast Forward
Switching on/off via the ignition:
If the set has been connected corre-
spondingly, it can also be turned on
and off with the vehicle ignition.
Press the ON button to keep on oper-
ating the set when the ignition is
switched off.
Changer mode
To fast forward the tape.
Optional:
Freiburg RCM 148, Siena RCM 148,
Louisiana RCM 148
7 + 8 Reversing the tape (PROG)
Press both buttons simultaneously.
Included:
Kingston DJ, St. Louis DJ
The set will switch on. To avoid that
the battery goes flat, the system will be
turned off automatically after one hour
of playback.
Select CD
Up
Down
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Select title
Up: press briefly
Radio mode
Press AF·TA briefly: TA off.
“TP” will be displayed when a traffic
programme is played.
Press SRC/SC longer.
CUE - fast forward (audible): hold
button down.
The radio will scan all receivable FM
stations. “SCAN” and the station name
appear on the display one after anoth-
er.
AF on/off:
Press AF·TA longer: a beep will be
emitted; “AF” appears.
Press AF·TA longer: a beep will be
emitted; “AF” disappears.
Down: press two or more times
briefly
Repeat title: press briefly.
REVIEW - fast reverse (audible):
hold button down.
PTY Scan
PTY Scan can be started if PTY is on
(“PTY” will be displayed).
The radio will scan all stations broad-
casting the selected programme type.
< PTY (Programme Type)
Extra function of rocker switch:
For additional settings use
You can select among various pro-
gramme types. Using the rocker switch
<< >> it is possible to recall all PTY
programme types, if PTY is activated
(“PTY” lights up in the display).
AUD
DSC-MODE
PTY
F
E
<
Changer mode
Press SRC/SC longer.
“SCAN” will be displayed.
To stop CD Scan: Press SRC/SC
again.
Requirement: The respective function
is activated.
= BA/TS
Switches between the wavebands/
memory banks FM1, FM2, FMT
(Travelstore), MW and LW (Freiburg
RCM 148, Kingston DJ without MW,
LW).
: SRC/SC
(SRC = audio source, SC = scan)
Press button briefly to select the oper-
ating mode (tuner, cassette, changer).
The active mode appears in the dis-
play.
Press SRC/SC longer to select the
SCAN function (samples radio stations
and titles).
; AF·TA
Alternative Frequency in RDS mode:
TA (Traffic Announcement = priority
for traffic programs)
If “AF” is displayed, the radio will auto-
matically search for a radio frequency
offering the same programme in a bet-
ter quality (using RDS).
Extra function: Travelstore
To store the six most powerful radio
stations in the Travelstore bank:
Press BA/TS until a beep sounds and
“T-STORE” appears.
Use DSC programming to set the scan
time.
TA on/off:
Press AF·TA briefly: “TA” will be dis-
played, priority for traffic programs ac-
tivated.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
>...C - Preset buttons 1 to 6
5/MIX
E DSC Direct Software Control
Adjusts programmable basic settings.
Refer to “DSC programming”.
“MIX CD” plays the titles of one CD in
random order.
Radio mode
You can store six stations in each
memory bank (1, 2, and “T”).
On MW and LW you can store six sta-
tions each (except for Freiburg RCM
148, Kingston DJ).
Store station - hold down a preset
button in radio mode until a beep is
emitted.
Recall station - select a waveband
and also the memory bank on FM;
press the relevant preset button briefly.
The selected preset button will briefly
appear in display field 1 (e.g. P1).
“MIX ALL” plays the titles of all CDs of
one changer magazine in random or-
der.
To turn MIX on/off:
Press 5/MIX briefly.
The current setting is briefly indicated
in the display: “MIX-CD”.
Switch MIX-ALL on:
F AUD
Default settings for treble and bass
You can store different settings for the
FM, MW, LW, cassette and CD mode
(Freiburg RCM 148, Kingston DJ with-
out MW, LW).
Setting the tone:
•
Hold 5/MIX down until a beep is
Select the audio mode. Press AUD
once and set the tone using the rocker
switch.
emitted.
D
DIS - clock display
Treble:
Treble +
Treble –
Radio mode
Press this button briefly and the time
will be displayed for a while.
Changer mode
Bass:
Bass –
Bass +
3/ - Pause
Interrupts CD play. “PAUSE” appears.
Press button again to restart CD play.
Changer mode
Press this button to switch the display
between CD number and CD time indi-
cation.
Press AUD twice and set the fader
using the rocker switch.
4/RPT
Repeat title: press 4/RPT. “REPEAT-T”
appears briefly. The title will be repeat-
ed until 4/RPT is pressed again.
Repeat CD: select “REPEAT-D”.
Switch REPEAT-D on:
Fader front
Fader rear
Balance left
Balance right
Cassette mode
Press this button to switch the display
between the cassette direction and
clock indication.
The selected values will appear in the
display. The last setting is stored auto-
matically.
•
Hold 4/RPT down until a beep is
emitted.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Important notes
Switching AUD off
Press button briefly.
If you do not change the tone within
8 sec., the AUD mode will quit auto-
matically.
Installation
What you need to know
If you would like to install your new car ster-
eo yourself or add other audio components
to existing ones, then please read the en-
closed instructions on installation and con-
nection carefully.
In order to ensure that the set operates prop-
erly the positive power supply line must be
connected via the ignition and the perma-
nent +12 V lead.
Before using your new car radio, please read
through the following information carefully.
Traffic safety
Extra function: LD
Loudness boosts the bass frequency
at low volume.
Press AUD longer than 2 seconds to
change the Loudness setting. “LD” will
appear.
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times.
Never use your car radio in a way that could
distract you.
Please keep in mind that you travel a dis-
tance of 14 m per second at a speed of only
50 km/h.
Do not ground the loudspeaker outputs!
Should the traffic situation become particu-
larly demanding, we advise you not to use
the radio.
Always make sure that you are still able to
hear any warning signals coming from out-
side the vehicle, such as police or fire en-
gine sirens, so that you can react accord-
ingly.
Warning note
Danger of damaging the automatic
power antenna in a car wash
Before you drive into a car wash
•
switch the radio off by pressing the ON
button.
The power antenna will retract, if it
doesn’t, press ON again.
Consequently, you should always select a
moderate volume for playing your car radio
while you are driving.
Do not drive into the car wash unless the
power antenna has retracted!
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock
Release panel
If the set was still in operation, it will turn off
now. All current settings remain stored. If a
cassette is inserted, it will be kept in the set.
The radio will turn on automatically when
you attach the release panel again.
This car radio is equipped with a built-in
clock.
Theft protection
This unit is equipped with a detachable con-
trol panel. A car radio without control panel
is worthless for thieves.
Display priority:
To switch the display priority, press the
button until you hear a beep. Press as many
times until the desired display mode is ac-
tive (not during radio reception).
Protect your car radio and detach the con-
trol panel when you leave your car. It is very
easy to attach and detach the release pan-
el thanks to its specific design.
Attaching the release panel
Slide the panel (B) from the left to the guide
of the chassis (A). Gently push the left side
of the panel against the front of the chassis
until it snaps into place.
Radio mode
Press the
clock.
button briefly to display the
Note:
Cassette mode
Do not pull the release panel straight out
from the chassis, but detach it as illustrated
below. Be sure not to drop the panel.
Do not expose the release panel to direct
sunlight or other heat sources.
Do not leave it in a humid place.
Press this button to switch the display be-
tween the cassette direction and clock indi-
cation.
Changer mode
Press the button briefly to switch the dis-
play between the CD number, playback time
and clock indication.
Detaching the release panel
Press the REL button to release the control
panel. Then pull it off gently as illustrated.
Setting the clock
•
•
Press DSC briefly.
Press to selection the “CLOCK-
/
SET” function.
•
Press << >> to set the hours or min-
utes. The adjustable option will flash in
the display.
•
•
Press
/
to adjust the flashing value.
After you have set the clock, press
DSC briefly to store the new setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Selecting the audio mode
Fixing the release panel
Use the SRC/SC (source) button to select
between radio, cassette and CD mode.
If you wish to fix the release panel perma-
nently to the chassis, screw down the en-
closed bolt at the left hand side of the chas-
sis into the hole (C), see Fig.
The CD mode is not available unless a CD
changer is connected.
To select the operating mode:
•
Press SRC/SC.
C
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation with RDS (Radio Data System)
The Radio Data System will enhance your If “SEARCH” appears in the display when
enjoyment when you listen to FM radio sta- the radio is switched on or one of the stored
Selecting a waveband
With this car radio you can select between
the following wavebands:
tions.
frequencies recalled, the unit is already au-
More and more radio stations broadcast tomatically searching for an alternative fre-
RDS information along with their regular quency.
FM87,5 - 108 MHz
MW 531 - 1602 kHz
LW153 - 279 kHz
(Freiburg RCM 148, Kingston DJ without
MW, LW).
programming.
“SEARCH” will disappear from the display
As soon as a programme has been identi- when the alternative frequency has been
fied, the station name including a regional found or after the frequency band has run
identifier, if applicable, will appear in the dis- through completely.
•
Select the desired waveband by press-
ing the BA/TS button.
play, for example, NDR1 NDS (regional pro-
gramme in Lower Saxony, Germany).
When RDS is activated, the preset buttons
become programme buttons. You now know
exactly which programme you have tuned
into, making it easy to find the desired sta-
tion quickly.
If the reception quality of the selected pro-
gramme deteriorates beyond a certain point:
•
Tune into another station.
Station tuning
Automatic seek tuning
/
REG - regional programme
•
Press
cally search for the next station.
If you hold pressed up or down on the
/
; the car radio will automati-
Certain radio programmes are split up at
times into regional programmes offering lo-
cal information. The 1st programme broad-
cast by NDR, for example, offers pro-
grammes with different contents in the north-
ern German states of Schleswig-Holstein,
Hamburg and Lower Saxony at certain times
of the day.
But RDS offers you further advantages:
/
rocker switch, seek tuning will speed up in
the upwards or downwards direction.
AF - Alternative frequency
The AF (Alternative Frequency) function
makes sure that the radio always tunes into
the strongest frequency of the currently se-
lected programme automatically.
If you are listening to a particular regional
programme and wish to continue doing so,
select “REG ON” in the DSC mode.
This function is activated when “AF” appears
in the display.
In order to switch this function on or off,
Automatic seek tuning
If you leave the service area of the regional
programme you are tuned into, or if you
would like to take advantage of full RDS
service, switch to “REG OFF” in the DSC
mode.
•
press the AF·TA button until a beep is
emitted.
Up
Down
<< / >> Up/down in short intervals
(on FM only if “AF” is switched off)
While searching for the strongest reception
signal, the radio may switch to mute briefly.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
To do this, you can start the Travelstore seek
operation:
•
•
Select the appropriate waveband by
pressing BA/TS.
Manual tuning with << >>
You can also tune into a station manually.
•
Press BA/TS for 2 seconds; the sys-
tem will start to run through the fre-
quency band.
Tune in a station with the rocker switch
Requirement:
AF and PTY must be switched off (i.e. the
symbols do not light up in the display).
(either automatically
<< >>).
/
or manually
If “AF” is not lit up,
•
Press the desired preset button until
the radio resumes play after the mut-
ing (takes approximately 2 seconds,
confirmed by a beep).
If necessary, deactivate these functions:
•
Hold AF·TA down. A beep sounds and
•
Press AF·TA or PTY.
“AF” appears.
Manual tuning:
This fulfils the requirements for selecting
stations with << >>.
Now the station has been stored.
The display will indicate which preset but-
ton is currently activated.
•
Press << >>; the frequency will change
in short intervals in the downwards or
upwards direction.
Switching between the memory
If you hold << >> pressed to the left or the
right on the rocker switch, the frequency
scan will speed up.
banks (FM)
You can switch between the memory banks
1, 2 and T in order to store stations and re-
call them later.
The currently selected memory bank ap-
pears in the display.
Automatically storing the
strongest stations with Travel-
store
Scrolling through the broadcast-
ing networks (FM only)
You can automatically store the six most
powerful FM stations in your current recep-
tion area sorted according to their signal
strength. This function is particularly conven-
ient on longer trips.
•
Press the BA/TS button as many times
as necessary until the desired memory
bank lights up in the display.
You can use the << >> buttons to tune into
stations in your reception area.
If it is possible to receive several pro-
grammes in the same broadcasting network,
you can scroll through them in the forwards
direction by pressing >>, or backwards
using the << button, e.g. NDR 1, 2, 3, 4,
N-JOY, ...
For this to work properly you must have al-
ready tuned into the stations at least once
and “AF” must be active (lights up in the dis-
play).
•
Press the BA/TS button for 2 seconds.
Storing stations
“T-STORE” will appear in the display.
On FM, you can store six stations on the
preset buttons 1, 2, 3, 4, 5, 6 for each of the
memory banks (1, 2, T).
On MW/LW, you can also store six stations
each (Freiburg RCM 148, Kingston DJ with-
out MW, LW).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
The six strongest FM stations will be auto- During the actual scanning process “SCAN”
matically stored on the memory bank “T” will appear in the display.
PTY - Programme Type
PTY is an RDS service offered by an in-
creasing number of broadcasting stations.
This feature allows you to select FM stations
according to their programme type.
After you have chosen the PTY of your pref-
erence, the corresponding stations can be
selected either by seek tuning or using the
scan function.
(Travelstore). When this process has been
completed, the radio will play the strongest
station.
If desired, stations can also be stored man-
ually in the Travelstore bank (see “Storing
stations”).
To select a scanned station and switch
off the Scan function:
•
Press SRC/SC briefly.
If no station is selected, scan will start again.
Changing the scan time
Recalling stored stations
The scan time can be selected from between
5 to a maximum of 20 seconds.
If you would like to alter the scan time,
please refer to the section on “DSC program-
ming - SCANTIME”.
Programme types
You can recall any stored station at the touch
of a button.
Turn PTY on.
•
Select the waveband by pressing
BA/TS. For FM, also choose the corre-
sponding memory bank by pressing
the BA/TS button as many times as
necessary until the desired bank ap-
pears in the display.
Use << >> to have the last selected pro-
gramme type displayed and to choose a new
one.
You can select any one of the stored types
with the preset buttons 1-6.
Selecting the automatic tuning
sensitivity
The following list indicates some of the pro-
gramme types which are available.
You can alter the automatic tuning sensitiv-
ity.
•
Press the corresponding preset button
briefly to recall the station.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also
pick up weaker, more distant stations (high
sensitivity).
WEATHER
FINANCE
TRAVEL
HOBBIES
JAZZ
Scanning stations with
Radio Scan
You can scan through all of the stations in If you would like to alter the sensitivity level
your reception area.
To start the Scan function:
please refer to the section on “DSC program-
ming – SENS”.
COUNTRY
NEWS
•
Press SRC/SC longer.
INFO
The scanned frequency or the station name
will start flashing in the display.
SPORT
Download from Www.Somanuals.com. All Manuals Search And Download.
33
CULTURE
SCIENCE
b) Using the << >> buttons on the rocker
switch
Displaying the selected programme
type
When PTY is switched on, you can
select a programme type using buttons
<< >>.
VARIED
•
Press << or >>.
The programme type selected last will be
displayed briefly.
POP MUSIC
ROCK MUSIC
CLASSICS
•
•
•
Press << or >>; the programme
type selected last will be displayed
for 3 seconds.
Selecting a programme type
a) Using the preset buttons
Switching PTY ON/OFF
During this period press >> (for-
wards) or << (backwards) to select
the desired type.
When PTY is switched on, you can use
the preset buttons 1-6 to select the
programme types stored at the factory.
•
Press PTY.
When the function is active, the programme
type selected last will briefly appear in the
display. “PTY” will appear permanently.
Press << or >> as many times as
required.
•
Press one of the presets 1-6.
The selected programme type will be
displayed for 2 seconds.
If you would like to listen to a station
with the selected PTY,
Checking the programme type of the
station
If you would like to listen to a station
with this PTY,
•
press
/
to start the seek tuning
function.
•
Press PTY for approximately 2 sec-
•
press
/
to start the seek tuning
If the radio is unable to find a station offer-
ing the selected programme type, the dis-
play will show “NO PTY” and a beep tone
will be emitted. The radio will select the sta-
tion which was tuned into before seek tun-
ing was activated.
onds.
function.
After the beep tone the display will show the
programme type offered by the tuned in sta-
tion. If “NONE” appears in the display, the
current station has no PTY code.
If the radio is unable to find a station offer-
ing the selected programme type, the dis-
play will show “NO PTY” and a beep tone
will be emitted. The radio will select the sta-
tion which was tuned into before seek tun-
ing was activated.
You can assign different programme types
to each preset position. Please refer to the
next section on “Storing programme types”.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
During cassette or CD operation, the set will
also switch to the programme offering the
selected PTY within the broadcasting net-
work.
After the PTY programme has ended the
system will switch back to the previous mode
(radio, cassette or CD).
Storing programme types
PTY priority
Each of the preset buttons 1-6 has been Situation:
assigned one programme type at the facto-
PTY is switched on and lights up in the dis-
ry.
play.
If desired, you can also replace these with
other available programme types.
To do so, make sure that “PTY” lights up in
the display.
No station offering the selected programme
type can be found currently in your recep-
tion range (with seek tuning or scan).
The set will switch back to the station previ-
ously tuned into.
As soon as it is possible to receive a pro-
gramme in the broadcasting network with
the PTY selected, the radio will switch over
to the corresponding station for the dura-
tion of the programme.
Note:
•
•
•
If necessary, press the PTY button to
switch on the function.
As already mentioned, these functions are
only supported by a limited number of RDS
stations at the present time.
Select a programme type using but-
tons << >> and
hold down the desired preset button
(1-6) until you hear a beep.
Example:
German broadcasting network NDR:
Now the selected programme type can be
recalled by pressing this preset, if “PTY”
lights up in the display.
-
-
-
-
-
Station playing: NDR3.
“PTY” lights up in the display.
Programme type “POP” selected.
Seek tuning is started.
Scanning stations with PTY SCAN
Requirement: “PTY” must appear in the dis-
play.
No station with “PTY-POP” can be
found.
•
Press the SRC/SC button until you
hear a beep.
-
-
-
-
The display shows “NO PTY” and
automatically switches back to NDR3.
NDR2 airs a “PTY-POP” programme.
All of the stations in your current re-
ception area offering the selected pro-
gramme type will be scanned.
To switch off PTY-SCAN:
The radio will switch to the linked sta-
tion NDR2 for the duration of the
“POP” programme.
•
Press SRC/SC or the seek-tuning
rocker switch once again.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Traffic programme station reception with RDS-EON
The abbreviation “EON” stands for En-
hanced Other Networks, which means that
information is exchanged within a radio net-
work.
Many FM radio stations provide their serv-
ice area with traffic messages at regular in-
tervals.
Along with their programmes, all traffic pro-
gramme stations transmit a special carrier
signal, which is decoded by your car radio.
If this signal is identified, “TP” will appear in
the display (Traffic Programme).
In addition to these, there are also stations
which do not actually transmit traffic infor-
mation themselves, but by using RDS-EON
it is possible for them to forward the traffic
messages broadcast by another traffic
programme station in the same radio net-
work.
If you want to have the priority for traffic
announcements activated while listening to
one of these stations (e.g. NDR4), “TA” must
appear on the display panel.
If a traffic announcement is broadcast, the
radio will automatically switch to the linked
traffic programme station (in this case,
NDR2) for the duration of the message and
return to the original programme (NDR4)
afterwards.
Traffic announcement priority
on/off
Switching the warning beep off
a) Tune into another station offering traf-
fic information:
If the priority for traffic announcement pro-
grammes is activated, “TA” will light up in
the display.
•
•
Press the rocker switch or
press a preset button which has a
traffic programme station allocated
to it.
To switch the priority on or off:
•
Press the AF·TA button. “TA” appears.
Alternatively:
If you press AF·TA while a message is be-
ing broadcast, this message will be inter-
rupted. The unit will then switch back to the
previous mode. The priority for other traffic
messages remains active.
Please note that several buttons have no
function while a traffic announcement is
broadcast.
b) Switch off the priority for traffic an-
nouncements:
•
Press TA.
“TA” will disappear from the dis-
play.
Automatic seek tuning start
(Cassette and CD changer operation)
Warning beep
If you leave the reception area for the traffic
programme station you have tuned into
while you are listening to a cassette or CD,
the system will automatically start search-
ing for a new traffic programme.
If no such station is found within approxi-
mately 30 seconds, a warning beep will
sound every 30 seconds. To switch the
warning beep off, proceed as described
above.
If you leave the reception area of the traffic
programme station currently tuned into, you
will hear a warning beep after approximate-
ly 30 seconds.
This alarm tone will also be emitted if you
press a preset button for a station which
does not send the traffic programme signal
(TP).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette deck operation
Adjusting the volume for traffic
announcements and the warning
beep
Reversing the tape
Cassette playback
To change the tape direction during cassette
playback:
Insert the tape into the slot with the open
side showing to the right.
Press SRC/SC to select the tape deck mode.
“TAPE 1” or “TAPE 2” will appear. The tape
will be played in the direction previously
selected.
•
Press FR/FF simultaneously.
Although this volume was preset at the fac-
tory, you can use the DSC function to alter
the setting (see “DSC programming - TA
VOL”).
The display shows “TAPE 1” or “TAPE 2”
for the selected tape side.
Traffic information during
cassette playback
Cassette eject
Press to eject the cassette.
The Traffic Announcement function (priori-
ty for traffic programmes) makes it possible
to receive traffic information during cassette
playback. If a traffic message is broadcast,
cassette playback will stop and the message
reproduced.
Fast winding
Press the FF or FR button to fast forward
(FF) or fast rewind (FR) the tape during cas-
sette operation: “FORWARD” or “REWIND”
lights up in the display.
This function is active, if “TA” lights up in
the display.
When the end of the tape is reached with
fast winding, the tape direction will change
and the other side of the tape will be played.
With “Radio Monitor ON” during fast wind-
ing you can listen to the radio programme
previously selected. It is possible to change
the Radio Monitor setting in the DSC mode.
(Refer to “DSC programming - RM”).
•
Press the AF·TA button briefly to acti-
vate TA.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
CD changer operation
Optional:
Switching to the CD changer
mode
Selecting a CD
Freiburg RCM 148, Siena RCM 148,
Louisiana RCM 148
When CD playback starts, all active CD func-
tions and the CD number light up in the dis-
play.
To change the display between CD number
and elapsed time indication, press
ing CD playback.
Make sure that at least one CD has been
inserted into the magazine.
Included in delivery:
Kingston DJ, St. Louis DJ
Press SRC/SC to change the audio source:
This piece of equipment offers you
convenient control of a Blaupunkt CD
changer CDC-A 08/CDC-A 072.
dur-
•
Press SRC/SC repeatedly until the CD
functions appear in the display.
Inserting a CD
sym-
If the CD changer is connected, the
bol lights up in the display.
Insert one or several CDs into the maga-
zine (printed surface facing up).
Slide the magazine into the CD changer in
the direction of the arrow.
The changer is equipped with a magazine
for 10 discs.
/
CD selection
Up
Note:
Down
The CDs are counted from bottom to top.
Use only perfectly circular CDs with a diam-
eter of 12 cm.
CDs with a diameter of 8 cm or CDs manu-
factured in the shape of a mug, for exam-
ple, are not suitable for use with this equip-
ment.
The CD number being played appears
in the display.
Ejecting a CD
Open the door of the CD changer and press
the eject button.
Using such CDs can very likely result in the
destruction of the CD and the CD drive.
We assume no responsibility for damages
caused by using unsuitable CDs.
After you have inserted the magazine, keep
the door of the magazine closed to prevent
contamination.
CD playback
Press SRC/SC to select the CD changer.
•
Press SRC/SC repeatedly until
“CHANGER” appears in the display.
CD playback starts with the first CD identi-
fied by the changer.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop the Scan function:
Press SRC/SC briefly.
Selecting a title
MIX
•
You can have the CD titles played in ran-
dom order.
The track currently scanned will continue to
play.
The following options are possible:
The SCAN function will also be cancelled
by pressing any other button, except for the
volume controls and the AUD and ON but-
tons.
-
-
Mix all titles of one CD (“MIX-CD”) or
Mix all titles of all CDs (“MIX-ALL”).
“MIX” appears in display field 3 as long as
the MIX function is active.
“MIX-CD” or “MIX-ALL” lights up briefly in
display field 2 when you activate this func-
tion and each time the title changes.
Up: Press briefly.
CUE - fast advance (audible):
Hold button down.
RPT
Down: Press two or more times briefly.
To re-start a title: Press briefly.
REVIEW - fast reverse (audible):
Hold button down.
CD titles can be played repeatedly.
The following options are possible:
Switch MIX-CD on:
•
Press 5/MIX briefly.
-
-
Repeat the current title (“REPEAT-T”) or
Repeat the CD, i.e. all titles of the cur-
rent disc (“REPEAT-D”).
Press the button repeatedly to skip several
titles.
The number of the selected title appears
beside “T” (track).
Switch MIX-ALL on:
•
Hold 5/MIX down until a beep is emit-
“RPT” appears in display field 3 as long as
RPT is active.
ted.
“REPEAT-T” or “REPEAT-D” lights up briefly
in display field 2 when you activate this func-
tion and each time the title changes.
SCAN
Use this function to scan all of the CD tracks.
Switch REPEAT-T on:
To start the Scan function:
•
Press 4/RPT briefly.
•
Hold down SRC/SC until “SCAN” ap-
pears.
Switch REPEAT-D on:
All titles of the CD will be scanned one after
the other in ascending order.
•
Hold 4/RPT down until a beep is emit-
ted.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
DSC programming
The car radio has been equipped with DSC LOUDNESS Loudness boosts the bass
CLOCK 24 To switch between 12-h and
(Direct Software Control) to allow you to
customise certain programmable, basic set-
tings to suit your personal needs and pref-
erences and then store them.
frequencies at low volume.
LOUD 1 - Low boost
LOUD 6 - Max. boost
24-h clock display.
CLOCKSET To set the clock manually.
Press << >> to select hours/
The basic settings for this audio equipment TA VOL
were made at the factory.
The traffic announcement
and warning beep volume
can be set between 0 to 66.
The message will then come
through at this volume, if the
standard volume is lower.
If the standard volume is set
higher than the TA VOL lev-
el, then the traffic report will
be played at the standard
volume.
minutes. Press
the flashing value.
/
to adjust
In the following you can find an overview of
these settings, so that you can always reset
to them if desired.
ON VOL
To set the turn-on volume.
Press << >> to adjust the
turn-on volume as desired.
If you wish to alter any of the programming,
•
press DSC.
“MENU
Use the
/
” will light up in the display.
buttons of the rocker switch to
MUTE
To change the mute volume.
/
select the function you wish to change. The
display will show you the setting you have
selected. Press the << >> buttons of the
rocker switch to change the values. Confirm
the setting you have selected by pressing
the DSC button.
BEEP X
To change the volume of the
acknowledgement tone
(beep) between 0 and 9.
(0 = off)
REG
Regional function on/off.
SENS DX1 To adjust the seek tuning
sensitivity.
RM OFF
Radio Monitor
“LO” stands for local recep-
tion.
“DX” stands for distant re-
ception.
Select “LO 3” if you want to
receive strong stations in
the local area, select “DX 1”
if you want to tune into
weaker stations which are
further away.
If the Radio Monitor function
is active during fast winding
of the tape, the set will
switch to the radio and play
the station previously re-
ceived.
/
Select function
<< >>
Adjust/recall value
40
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANTIME Use this function to set the
scan time for the radio or
CD player from 5 to 20 sec-
onds.
Overview of the DSC factory
settings
LOUDNESS
TA VOL
REG
3
40
OFF
AUX
Select AUX ON if you wish
to connect a Discman or
Walkman instead of the CD
changer. Contact your deal-
er for more information.
SENS
DX1
CLOCKTYPE
CLOCKSET
ON VOL
MUTE
CLOCK 24
20
10
BEEP
RM
3
DISPLAY
ON/OFF
OFF
10 sec.
OFF
OFF
SCANTIME
AUX
DIS
Display indications on or off
with the car radio turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Appendix
CD player
Specifications
Optional:
Amplifier
Freiburg RCM 148, Siena RCM 148,
Louisiana RCM 148
Output power:
4 x 23 W RMS power
acc. to DIN 45324 at
14.4 V
Included:
Kingston DJ, St. Louis DJ
4 x 35 W max. power
Tuner
Frequency response:
20 - 20 000 Hz
Wavebands:
FM
MW
LW
87.5 – 108 MHz
531 – 1602 kHz
153 – 279 kHz
(Freiburg RCM 148, Kingston DJ without
ML, LW).
FM frequency response:
35 - 16 000 Hz
Cassette
Frequency response:
35 - 16 000 Hz
Subject to modifications!
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Blaupunkt-Werke GmbH
Bosch Gruppe
3/98 Mg
K7/VKD 8 622 401 520
Download from Www.Somanuals.com. All Manuals Search And Download.
|