Blaupunkt Car Stereo System 2000 DJ User Manual

Radio / Cassette

Chicago RCM 169

Hannover 2000 DJ

Kansas DJ

Montreal RCM 169

Paris RCM 169

Operating instructions

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of contents

Quick Reference........................... 45 Storing stations ..................................... 61 Changer operation ....................... 70

Selecting the seek tuning sensitivity .... 62

Switching from stereo to mono (FM) .... 63

Automatic bandwidth adjustment

(SHARX) ............................................... 63

PTY - Program Type............................. 63

Program type ........................................ 63

Switching on CD changer operation..... 70

Selecting the display mode .................. 70

Selecting CDs and tracks ..................... 70

Repeat tracks/CDs with RPT................ 71

TPM (Track Program Memory)............. 71

MIX........................................................ 72

SCAN .................................................... 72

Entering CD names .............................. 72

Deleting CD names/TPM with DSC

RC 08 remote control unit ........... 53

Important notes ............................ 54

What you need to know ........................ 54

Traffic safety ......................................... 54

Installation............................................. 54

Telephone mute .................................... 54

Accessories .......................................... 54

Guarantee ............................................. 54

International telephone information ...... 54

Traffic information station

reception with RDS-EON ............. 66

Traffic announcement priority on/off .... 66

Warning beep ....................................... 66

Switching the warning beep off ............ 66

Automatic search function .................... 66

Adjusting the volume for traffic

UPDATE ............................................... 73

KeyCard theft protection system 55

Clock - Time.................................. 74

Putting the unit into operation .............. 55

Removing the KeyCard ........................ 55

“Training” a second KeyCard/

Correcting the clock after the power

has been disconnected......................... 74

Deactivating the hour correction

announcements and the warning beep .. 66

Replacing a KeyCard............................ 55

Displaying the radio pass data ............. 56

Short Additional Memory (S.A.M.)........ 56

Turn On Message (T.O.M.) .................. 56

Optical display as theft protection ........ 56

Care of your KeyCard ........................... 57

Lost or damaged KeyCard ................... 57

Training the new KeyCard .................... 57

function ................................................. 74

Cassette operation....................... 67

Setting the equaliser.................... 75

Notes on making the settings ............... 75

Setting recommendations on the

Internet .................................................. 75

Assistance in setting your equaliser..... 76

Dolby B NR*.......................................... 67

Selecting the display mode .................. 67

Track reverse ........................................ 68

Scanning cassette titles with SCAN ..... 68

Selecting titles with S-CPS ................... 68

Repeating titles with RPT ..................... 69 DSC programming ....................... 77

Fast tape forward/rewind ...................... 69

Listening to the radio while fast forwarding

or rewinding the tape with Radio Monitor 69

Automatically skipping over blank portions

of the tape with Blank Skip (BLS) ........... 69

Care instructions................................... 69

Overview of the DSC factory settings .. 80

Selecting the operating mode..... 58

Optimising display legibility ....... 58

Radio operation with RDS ........... 59

AF - Alternative frequency .................... 59

REG - regional program ....................... 59

Selecting a waveband .......................... 60

Station tuning ........................................ 60

Specifications............................... 80

Glossary -

Technical Terminology ................ 81

Index.............................................. 83

Installation and

connection instructions ............ 333

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

2 ON

Switching the unit on:

Switching the unit on/off with the

KeyCard:

1 Unlocking the fold-down operating

panel

With the KeyCard inserted, press ON

briefly.

The unit will begin to play in the oper-

ating mode selected last at the pre-set

volume.

The unit switches on or off when the

KeyCard is inserted or removed.

Refer to section @ in the Quick Refer-

ence on the KeyCard theft protection

system.

It is possible to insert or remove the

KeyCard and the cassette when the

operating panel is unlocked.

To unlock the panel press 1, the op-

erating panel will fold down. The oper-

ating panel cannot be removed. Do not

use the panel as a rest or shelf.

To lock the panel, push it back into its

starting position (arrow 3).

Switching the unit on/off with the

ignition:

If the unit has been connected accord-

ingly, it can be switched on and off

with the car ignition.

After you switch off the ignition, a dou-

ble beep will sound to remind you to

remove the KeyCard and take it with

you.

To switch off the unit:

Press ON for approx. 1 second.

The viewing angle of the display can

be adjusted individually to ensure opti-

mum legibility. If necessary, refer to

the section on “Optimising the display

legibility”.

Switching the unit on with the igni-

tion switched off:

After you have switched off the ignition

(KeyCard is inserted in the unit), you

can continue to operate the unit as fol-

lows:

For safety’s sake, the operating

panel must remain locked when

the vehicle is in motion.

Switching the sound on/off:

Press ON briefly. When the sound has

been switched off, “MUTE” will appear

in the display.

When you leave the vehicle, un-

lock the panel and remove the

KeyCard to protect the equipment

against theft.

After the double beep press ON.

The unit will switch on.

After the unit has played for an hour it

will switch off automatically to prevent

the car battery from running down.

The sound can be switched on again

by turning the volume knob 3.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

3 Adjusting the volume

Turn the knob to adjust the volume as

desired.

Menu level 1

Station keys and memory levels

Menu level 2

Adjusting the radio functions

The volume level selected will appear

in the display. When the unit is

switched on, it will automatically play

at the pre-set volume (ON VOL).

It is possible to adjust the ON VOL (re-

fer to “DSC programming - ON VOL”).

NEXT - FM

Switches between the memory levels

for FM I, FM II, FM T.

NEXT - AM (MW, LW)

Switches between the MW and LW

wavebands.

Switches between the memory levels

for FM I, FM II, FM T.

NEXT - AM (MW, LW)

Switches between the MW and LW

wavebands.

ST1 - ST6

BND

4 Softkeys / Display

On this memory level it is possible to

store radio stations on the FM levels I, II

and “T” on the keys marked ST1 to ST6.

6 stations each can be stored for the

MW and LW wavebands.

Selects the waveband and memory

level (FM I, FM II, FM T, MW, LW).

Softkey = key with different functions

The functions which appear in the dis-

play can be selected.

SCA - Scan

a) PTY is switched off

Radio operation

Storing a radio station - Press one of

the station keys from ST1 to ST6 until

it is possible to hear the program again

(beep).

Recalling a radio station - Select the

desired waveband. For FM press

NEXT to select the memory level re-

quired and press the corresponding

station key briefly.

(lettering is lit normally, not highlighted

in the display)

While listening to the radio you can

press TU to switch between menu lev-

el 1 and menu level 2.

The unit will return to menu level 1 au-

tomatically 8 seconds after the last key

is pressed.

Press SCA briefly (Radio Scan) -

“SCAN” will flash in the display alter-

nately with the abbreviation for the sta-

tion being scanned. All of the radio

stations within reception range will be

scanned.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

Press SCA for approx. 1 second

(Preset Scan) -

Press << >> to activate the PTY pro-

gram types and press the station keys

to store them (press the key for ap-

prox. 2 seconds, until you hear a

beep).

frequency with better reception for the

station you are tuned into.

AF on/off: Press TU to select menu

level 2 and press AF briefly.

You will hear a beep and “SCAN” will

flash in the display alternately with the

abbreviation for the station being

scanned. The radio stations which

have been stored on the station keys

and which are currently within recep-

tion range will be scanned.

EXIT

REG (Regional function)

This function is active when “REG” is

highlighted in the display.

Press this key briefly to end or cancel

an adjustment.

REG on/off: Press TU to select menu

level 2 and press REG briefly.

If necessary, refer to the section on

REG - Regional in the more detailed

instructions.

ENT (Enter)

Press this key briefly to accept or store

an adjustment.

Stopping Radio Scan / Preset Scan:

Press SCA or the rocker switch once

again.

TS (Travelstore)

b) PTY is switched on

If you press TS, the radio will switch to

FMT from any other waveband. The

six stations with the strongest recep-

tion will be stored automatically. After

the stations have been stored, the ra-

dio will tune into the station with the

best reception and begin to play.

(lettering is highlighted in the display)

Cassette operation

PTY

(Program Type)

With PTY the station keys become pro-

gram type keys.

“PTY” must be highlighted in the dis-

play (press PTY if necessary).

Now it is possible to select a program

type such as NEWS, SPORT, POP,

and store it on one of the station keys.

Press SCA -

the stations broadcasting the pro-

grams for the PTY program type se-

lected will be scanned.

In the cassette mode, the softkeys can

be used to select the corresponding

cassette functions.

REVerse

AF (Alternative Frequency for RDS

operation)

If “AF” is highlighted in the display, the

radio will automatically search for a

Switches to the opposite track (side).

The display indicates which track is

currently playing (Side A/B).

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

SCA (Scan)

RM (Radio Monitor)

Changer operation

Briefly scans the cassette titles.

Starting/ending Scan: Press SCA.

When the function is active, “SCAN”

will appear in the display.

To listen to the radio while fast for-

warding or rewinding the tape. When

“RM” appears highlighted in the dis-

play, it is possible to listen to the radio

while the tape is rewinding or forward-

ing.

RPT (Repeat)

To repeat the scanned or the next title.

The title will repeat until RPT is

switched off.

The Repeat function will end automati-

cally when the cassette is removed or

the set is switched off.

Switching Radio Monitor on/off: Press

RM, the activated function will appear

briefly in the display to indicate wheth-

er it is switched on or off.

In the changer mode, the softkeys can

be used to select the corresponding

changer functions.

BLS (Blank Skip)

MIX

Switching Repeat on/off: Press RPT,

the activated function will appear brief-

ly in the display to indicate whether it is

switched on or off.

The set skips over blank portions of

the tape when “BLS” appears highlight-

ed in the display. As soon as there is a

break of more than 10 sec. during cas-

sette playback, the fast forward func-

tion will be activated to move to the

next title.

Switching Blank Skip on/off: Press

BLS, the activated function will appear

briefly in the display to indicate wheth-

er it is switched on or off.

CD tracks will be played in random or-

der.

Press the MIX key to select the follow-

ing functions:

- MIX CD = the tracks on the CD will

be played in random order.

If you are using a CD changer, the

CDs will be selected in numerical or-

der and the tracks in random order.

- MIX MAG = all of the tracks on all of

the CDs in the magazine will be

played in random order.

Dolby B NR*

Cassettes recorded using Dolby B NR

will playback in the best quality when

the

symbol appears on a highlighted

background.

The noise reduction system is manufactured

under licence by the Dolby Laboratories Licens-

ing Corporation. The word DOLBY and the dou-

ble-D symbol are trademarks of the DOLBY Lab-

oratories.

- MIX OFF = switches the function off.

SCA - Scan

Scans all of the tracks on a CD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

5 TA (Traffic Announcement = priority

for traffic information)

For FM only:

<< / >> Pages through the station chain

with AF on and PTY off

Start Scan:

Press SCA. The tracks will be scanned

in ascending order one after the other.

The scan time can be adjusted (see

“DSC programming - SCANTIME”).

“TP” will appear in the display when

the radio is tuned into a traffic informa-

tion station.

e.g.: NDR 1, 2, 3, 4, N-JOY, ...

Cassette operation

“TA” will appear in the display when

the priority for traffic information has

been activated.

The radio will then play traffic informa-

tion radio stations only.

Stop Scan:

Press SCA. The track scanned last will

begin to play.

RPT - Repeat

Priority on/off: Press TA.

CD tracks or CDs in the CD changer

can be repeated as often as desired.

Press the RPT key to select one of the

following functions:

- REP TRCK = Repeat track

- REP CD = Repeat CD

Interrupt an announcement: Press TA

or EXIT.

Select title (S-CPS)

forwards

back

6 Rocker switch

Radio operation

fast forward

fast rewind

If you press the rocker switch when the

unit is on menu level 2, it will automati-

cally return to menu level 1.

- RPT OFF = switches the function off

TPM - Track Program Memory

Changer operation

Stores and plays your favourite tracks.

It is possible to manage up to 99 CDs

with up to 40 tracks. (Refer to the sec-

tion on “TPM programming”.)

CLR

To clear the TPM memory. (See the

section on “TPM - Deleting the memo-

ry”)

Station seek tuning

down

<< / >> Select CD

up: Press briefly

down: Press briefly

<< / >> down/up in short intervals

(for FM only when AF and PTY are

switched off)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

Select track

up: Press briefly

CUE - fast forward (audible):

Hold pressed down

down: Press twice or repeatedly

briefly

To restart the track: Press briefly

REVIEW - fast reverse (audible):

Hold pressed down

8 AUD

Adjusts treble, bass, balance (left/

Special Loudness feature:

Press to select the setting from

LOUD 6 to LOUD OFF.

right), fader (front/rear) and Loudness.

Loudness = Boosts low frequency for

more bass and a better adjustment to

the human ear.

Switching off AUD:

Press EXIT.

If you do not alter any of the settings,

AUD will switch off automatically after

8 seconds.

Kansas DJ, Chicago RCM 169:

For FM, AM, CD, AUX and TA it is

possible to store different treble, bass

and loudness settings.

Additional functions for the rocker

switch:

Additional feature

Switching the equaliser on/off (DPE

ON/OFF):

Press AUD for approx. 2 seconds.

“DPE ON” or “DPE OFF” will appear

briefly in the display.

Other adjustments are possible with

How to make the settings:

Select the operating mode.

Press AUD once, “BASS” and the level

currently selected will appear in the

display.

AUD

DSC-MODE

PTY

as long as the corresponding function

is activated.

For more information on the equaliser:

Refer to “Setting the equaliser”.

7 DSC (Direct Software Control)

Using DSC it is possible to adjust the

programmable basic settings.

Further information: “DSC program-

ming”.

9 DIS

Selects different display modes.

Radio operation

Press DIS briefly:

Use << / >> to select the different

- Name of the current radio station

- Current frequency

- PTY code

modes.

Use

to make the corresponding

settings.

This will not work properly unless the

radio is able to receive an RDS station

in adequate reception quality.

The settings selected will appear in the

display. The setting selected last will

be stored automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

SCA

RPT

- Scans cassette titles briefly

- Title repeat function for cas-

sette operation

: Display

- Dolby B NR is active

- Radio listening during fast

tape forwarding or rewind

- Blank tape portions will be

skipped automatically

BLS

Press DIS for approx. 2 seconds:

Display will alternate between the

clock and the waveband (incl. the

memory level for FM).

NDR2

I, II, T

- station name

- waveband

- memory level I, II or Travel-

store

TP, TA

- TP = Traffic Program

- TA = Priority for traffic infor-

mation is activated

Cassette operation

Press DIS briefly:

PTY

- Program type is activated

- Alternative frequency for

RDS

- Seek tuning sensitivity ad-

justable with DSC

The display mode selected will appear

briefly in the display.

CD 10 T3 - CD number and track number

VIVALDI - CD name

“COUNTER” - tape counter

“CLOCK”

- time

MIX

- CD tracks can be played in

random order

“ELAPSED” - elapsed playing time for

the tape side

“REMAIN” - remaining playing time

on the tape side

CC-IN

- Equaliser is switched on

- Cassette is inserted

SCA

RPT

- CD tracks are being scanned

- Repeat function for changer

operation

TPM

CLR

- Store and play favourite CD

tracks

- Delete TPM memory

Changer operation

Press DIS briefly:

- CD number, track number, clock

- CD number, track number, time

played

SIDE A

REV

- Side (track) A is playing

- Reverse (tape side reverse)

- CD name, track number

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

? Visual theft protection

Perform these steps in the reverse or-

der to remove the KeyCard.

Make sure to read the information in

the section on “KeyCard theft protec-

tion system”.

The following conditions must be ful-

filled before the light diode will flash as

a visual indication of theft protection:

The unit is switched off;

FM I, II, T - FM memory level

MW, LW - Waveband

The operating panel is folded down;

The KeyCard has been removed;

The DSC menu settings is switched to

LED ON (factory setting).

For more information, refer to “DSC

programming, LED ON/OFF”.

A Eject

Press the Eject button briefly to eject

the cassette.

00:20

- Time played

12:50

- Clock

@ KeyCard theft protection system

The KeyCard must be inserted before

the unit can be operated.

; CDC

Switches to changer operation (only if

a changer is connected).

If there is no changer, the system will

switch to AUX as long as AUX ON is

switched on in the DSC menu.

KeyCard

< CC

For safety’s sake, the operating

panel must remain locked when

the vehicle is in motion.

When you leave the vehicle, un-

lock the panel and remove the

KeyCard to protect the equipment

against theft.

Switches to cassette operation

Inserting the KeyCard

Press 1 to unlock the operating pan-

el; it will fold down forwards.

Insert the KeyCard with the contact

points facing down (see illustration).

Lock the operating panel.

= TU (TUNER)

Switches to radio operation. Switches

to the memory levels/wavebands FM I,

FM II, TS (Travelstore), MW and LW.

> Cassette slot

Insert cassette (Side A or 1 facing up;

opening to the right).

Download from Www.Somanuals.com. All Manuals Search And Download.

RC 08 remote control unit

D << / >>,

Select track

Included with package: Chicago RCM 169

up: Press briefly

Radio operation

Optional:

Hannover 2000 DJ

Kansas DJ

Montreal RCM 169

Paris RCM 169

CUE - fast forward (audible):

Hold pressed down

down: Press twice or repeat-

edly briefly

Station seek tuning

down

To restart the track: Press

briefly

REVIEW - fast reverse (audi-

ble): Hold pressed down

<< / >> down/up in short intervals

(for FM only when AF and

PTY are switched off)

For FM only:

<< / >> Pages through the station

chain with AF on and PTY off

e.g.: NDR 1, 2, 3, 4, N-JOY, ...

Sound mute on/off:

Press

briefly. When the sound has

been switched off “MUTE” will appear

in the display.

Cassette operation

Select title (S-CPS)

forwards

Cassette operation

back

Switching sound on/off:

Press

Track switch:

Press for approx. 1 sec.

briefly.

fast forward

fast rewind

B V- / V+

Volume control

Changer operation

C SRC (Source)

Switches operating modes

- Radio

- CC (Cassette)

<< / >> Select CD

up: Press briefly

down: Press briefly

- Changer (if a changer is connected)

Download from Www.Somanuals.com. All Manuals Search And Download.

Important notes

What you need to know

Telephone mute

Amplifiers

All Blaupunkt amplifiers

Before using your new car audio system, If a car phone has been installed, it is possi-

please read through the following informa-

tion carefully.

ble to mute radio, cassette and CD playback

automatically during a telephone call (tele-

phone mute). “PHONE” will then appear in

the display.

CD changers

The following CD changers can be connect-

ed directly: CDC A 06, A 072, A 08.

The A 05 and the A 071 can be connected

with the adapter cable 7 607 889 093.

The CDC-A 08 is included with the Hanno-

ver 2000 DJ / Kansas DJ.

Traffic safety

Traffic announcements continue to have

priority if you have activated TA. You can

interrupt traffic messages by pressing TA.

As the driver of a motor vehicle, it is your

responsibility to pay attention to the traffic

situation at all times. Never use your car au-

dio system in a way that could distract you.

Guarantee

Accessories

Please keep in mind that you travel a dis-

tance of 14 m per second at a speed of only

50 km/h.

The scope of the guarantee is determined

by the laws in the country where the unit

was purchased.

Regardless of the legal guarantee regula-

tions, Blaupunkt affords a 12-month guar-

antee.

If you have any questions about the guar-

antee, please contact your dealer. Your cash

Use only Blaupunkt-approved accessories

and spare parts.

You can use the following Blaupunkt prod-

ucts with this unit:

Should the traffic situation become particu-

larly demanding, we advise you not to use

the audio system.

RC 08 remote control unit

Always make sure that you are still able to

hear any warning signals coming from out-

side the vehicle, such as police or fire engine

sirens, so that you can react accordingly.

The RC 08 infrared remote

control unit allows you to

conveniently operate the

most important functions

from the steering wheel.

This remote control unit is

included with the Chicago

RCM 169 and can be or-

dered optionally for the oth-

er units.

Consequently, you should always select a

moderate volume for playing your car audio

system while you are driving.

International telephone informa-

tion

Have you got any questions on the opera-

tion of this equipment or do you require more

information?

Give us a call!

You will find the international telephone and

fax number on the last page of this manual.

Installation

If you would like to install your new car ster-

eo yourself or add other audio components

to existing ones, then please read the en-

closed instructions on installation and con-

nection carefully.

Download from Www.Somanuals.com. All Manuals Search And Download.

KeyCard theft protection system

This car radio comes equipped with one

KeyCard, but it can also be operated with a

second card.

•

Insert the KeyCard with the contacts

facing down as shown in the illustra-

tion (arrow 1).

Removing the KeyCard

To unlock the operating panel:

•

Press 1, the operating panel will fold

down forwards.

If you have lost your KeyCard or if it was

damaged, you can buy a new one from your

specialised dealer.

Push the card in to the right as far as

possible and remove it to the front.

If you use two KeyCards, the settings stored

on the first card will be transmitted to the

second. However, you can individually store

the following functions:

Push the operating panel back into po-

sition.

For safety’s sake, the operating

panel must remain locked when

the vehicle is in motion.

When you leave the vehicle, un-

lock the panel and remove the

KeyCard to protect the equipment

against theft.

Preset button assignments, bass, treble,

balance and fader settings, Loudness, TA

(traffic announcement volume), beep vol-

ume, LOW-EQ, HIGH-EQ.

•

Push the card in the direction of the ar-

row (2) and lock the operating panel

back into position (arrow 3).

In addition, the settings activated before the

radio is switched off, such as the waveband,

station, TA priority, AF, REG ON/OFF,

SCANTIME, seek tuning sensitivity, ON VOL

and SHARX will also remained stored.

The car radio is now ready for operation.

If a wrong KeyCard is inserted, then “CARD

ERR” will appear in the display.

The system will switch off after approximate-

ly ten seconds.

“Training” a second KeyCard/

Replacing a KeyCard

This ensures that you will find your basic

settings re-adjusted automatically as soon

as you have inserted your KeyCard.

If another card type is inserted (e.g. phone

or credit card), the display will show

“WRONG KC” for approximately two sec-

onds.

When the unit is in operation with the first

KeyCard, you can “train” a second one to

be also used with the set.

If you want to “train” a second KeyCard:

Putting the unit into operation

Remove the wrong card and insert the cor-

rect KeyCard.

•

Insert the first KeyCard and turn on the

set.

•

Turn on the set with ON.

To insert the KeyCard, unlock the operating

panel by

•

Press ON to turn on the set.

Press the DSC button and press

to select “LEARN KC”.

•

pressing 1, the operating panel will

Press << or >>.

fold down.

The display will switch to “CHANGE”.

Download from Www.Somanuals.com. All Manuals Search And Download.

KeyCard theft protection system

•

Remove the first KeyCard and insert

the new one while “CHANGE” still ap-

pears in the display.

Short Additional Memory

(S.A.M.)

Optical display as theft protec-

tion

The second KeyCard available from your Flashing light diode ?

specialised dealer allows you to read out

After the display indicates “READY” or

“LEARN KC”,

When the vehicle is stationary and the Key-

short information, which will run through the

display, such as, for example, the phone

number of your car dealer or the emergen-

cy call number of your automobile associa-

tion.

Card has been removed, the light diode can

be switched to flash for extra anti-theft se-

curity.

•

press DSC.

Now you can also use the new KeyCard for

operating your unit.

For this it is necessary that the positive pow-

er supply line and the permanent +12 V lead

are connected such as described in the in-

stallation instructions.

Make sure that the unit is switched off; the

operating panel is unlocked; the KeyCard

has been removed; “LED ON” has been

selected in the DSC mode (factory setting).

If necessary, please refer to the section on

“DSC programming - LED”.

A maximum of two cards can be used with

the set.

The freely selectable text with a maximum

of 162 characters can be programmed by

any dealer who has the required equipment

available.

If you attempt “train” a third one, the access

authorisation for the KeyCard not used for

the “training” process will be deleted auto-

matically.

Turn On Message (T.O.M.)

Displaying the radio pass data

The second KeyCard available from your

specialised dealer also allows you to dis-

play a special turn-on message each time

the radio is switched on.

You can use the KeyCard supplied with your

set to display the radio pass data such as

the model name, product number (7 6 ...)

and serial number.

Switching off the flashing light

The flashing light can be switched off by

selecting “LED OFF” in the DSC menu.

The freely selectable text with a maximum

of 48 characters can be programmed by any

dealer who has the required equipment

available.

Please refer to the section on “DSC pro-

gramming - READ KC”.

Each time you turn on your system with the

second KeyCard, the programmed text will

appear in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

KeyCard theft protection system

Care of your KeyCard

Training the new KeyCard

To ensure that the KeyCard will function

properly it is important that the contacts are

free from any foreign particles. Avoid direct

skin contact.

•

Insert the new KeyCard into the unit

and lock the operating panel into posi-

tion.

•

Press ON.

If necessary, clean the KeyCard contacts

using a cotton swab soaked in rubbing al-

cohol.

Within the next 5 seconds, press TU

and ST1. “0000” will appear in the dis-

play.

•

Now use the rocker switch to enter the

four-digit master code in the radio

pass:

Lost or damaged KeyCard

If the KeyCard for your unit is lost or dam-

aged you can train a new KeyCard.

You can purchase the new KeyCard from

any authorised dealer. You will also require

the master code for the unit, which you will

find in the radio pass.

- Enter digits (press as often

as required)

<< / >> - Select the entry position.

•

Press ENT after you have entered the

correct master code.

The new KeyCard has been accepted when

the unit switches to play.

Always keep the radio pass in a safe

place. Do not leave it in your vehicle.

Making mistakes in the entry

If you enter the wrong code, “CODE-ERR”

will appear in the display. If you enter the

wrong code three times, “WAIT 1h” will ap-

pear in the display. The unit will switch to a

standby mode for one hour.

•

Switch the unit off and on again.

Repeat the steps to train the new KeyCard,

but be sure to enter the correct master code.

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the operating

mode

Optimising display

legibility

You can select the following operating The viewing angle of the display can be al-

modes: Radio (TU), Cassette (CC) and CD tered to allow optimum legibility.

changer (CDC).

•

Press DSC.

CC cannot be selected unless a cassette

has been inserted.

Press the lower part of the rocker

switch until “ANGLE” appears in the

display.

CDC cannot be selected unless one of the

Blaupunkt changers, the A 06, the A 072,

the A 08, the A 05, or the A 071 has been

connected and there is at least one CD in

the magazine.

To switch the operating mode:

•

press TU, CC or CDC.

If you press TU again, the unit will switch to

menu level 2. On this level it is possible to

adjust the functions for radio operation. The

unit will switch back to menu level 1 auto-

matically approx. eight seconds after the last

adjustment was made.

•

Press << / >> to set the best viewing

angle for your position.

When you have completed the setting

press DSC.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

The Radio Data System offers you more

convenience when you listen to FM radio

stations.

REG - regional program

Certain radio programs are split up at times

into regional programs offering local infor-

mation. The 1st program broadcast by NDR,

for example, offers programs with different

contents in the northern states of Germany

Schleswig-Holstein, Hamburg and Lower

Saxony at certain times of the day.

If you are listening to a program and want

to continue to listen to that program, it is ad-

visable to switch to REG ON.

More and more radio stations have begun

to broadcast RDS information alongside

their programs.

As soon as a program has been identified,

“AF” is highlighted for the corresponding

softkey.

the station name including a regional identi-

fier, if available, will appear in the display,

for example, NDR1 NDS (regional program

in Lower Saxony, Germany).

If you leave the service area of the regional

program you are tuned into, or if you would

like to take advantage of the full RDS serv-

ice, switch to “REG OFF”.

When RDS is activated, the preset buttons

become program buttons. You now know

exactly which program you have tuned into,

making it easy to find the desired station

quickly.

While searching for the strongest reception

signal, the radio may switch to mute briefly.

To switch REG on/off:

•

Press TU, menu level 2 will appear.

But RDS offers you further advantages:

If “SEARCH” appears in the display when

you switch on the radio or recall one of the

stored frequencies, this indicates that the

unit is automatically searching for an alter-

native frequency.

AF - Alternative frequency

The AF (Alternative Frequency) function

makes sure that the strongest frequency of

the currently selected program is always

tuned in automatically.

“SEARCH” will disappear from the display

when the alternative frequency has been

found or after the frequency band has been

run through completely.

Menu level 2

Switching AF on/off:

For radio operation

If the reception quality of the selected pro-

gram deteriorates beyond a certain point:

•

Press the key marked REG, you can

switch to “REG ON” or “REG OFF”.

•

Press TU, menu level 2 will appear.

Press the AF button briefly.

•

Tune into another station.

The function is activated when “AF” lights

up in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

The setting selected will appear briefly in the Station tuning

If necessary, deactivate these functions in

menu level 2.

display. When the regional function has

Automatic tuning

Press / ; the car radio will automati-

cally search for the next station.

If you hold on the rocker switch pressed

up or down, seek tuning will speed up in up-

wards or downwards direction.

been activated, the corresponding key will

be highlighted in the display.

•

Manual tuning:

•

Press << >>; the frequency will change

in short intervals downwards or up-

wards.

Selecting a waveband

With this car radio you can select between

the following wavebands:

If you hold the right or left part of the rocker

switch pressed down, the frequency scan

will accelerate.

FM 87.5 - 108 MHz

MW 531 - 1602 kHz

LW 153 - 279 kHz

Scrolling through the broadcast-

ing networks (FM only)

•

Select the desired waveband by press-

ing TU, menu level 2 will appear in the

display.

Seek tuning

You can use the << >> buttons to tune into

Down

stations in your reception area.

If it is possible to receive several programs

in the same broadcasting network, you can

scroll through them forwards by pressing >>,

or backwards by pressing <<, e.g. NDR 1,

2, 3, 4, ... . Start Travelstore:

<< Down in short intervals

(for FM only; “AF” must be switched off)

>> Up in short intervals

(for FM only; “AF” must be switched off)

Manual tuning with << >>

•

Press TU; menu level 2 will appear in

Menu level 2

the display.

You can also tune into a station manually.

If “AF” does not light up,

press AF in menu level 2.

In this case:

AF and PTY must be switched off (i.e. the

symbols do not light up in the display).

•

Press BND (as often as required) to

select the waveband.

•

The radio will switch through the wavebands

as follows: FM I, FM II, FMT, MW, LW.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

Changing the memory bank (FM)

•

Press the desired preset button until

the radio resumes play after the muting station with the strongest reception (ST 1).

(takes approximately 2 seconds, con-

firmed by a beep).

has been completed, the radio will play the

You can shift between the memory banks I,

II and T in order to store stations and recall

them later. The currently selected memory

bank is indicated in the display.

If desired, stations can also be stored man-

ually on the Travelstore bank (see “Storing

stations”).

Now the station has been stored.

•

Press NEXT as often as necessary un-

til the desired memory bank lights up

in the display.

Note:

Recalling stored stations

Should you tune into a station which has

already been stored before on another mem-

ory bank, the corresponding preset button

and the memory bank will flash briefly in the

display.

You can recall any stored station at the touch

of a button.

Recall the stations on the waveband select-

ed directly:

Automatically storing the

strongest stations with Travel-

store

•

by pressing ST1 - ST6.

To select a station on a different waveband:

•

Press NEXT as often as necessary un-

til the desired memory bank appears

and then select the station by pressing

ST1 - ST6.

You can automatically store the six most

powerful FM stations in your current recep-

tion area sorted according to their signal

strength. This function is particularly con-

venient on longer trips.

Storing stations

On FM, you can store six stations on the

preset buttons ST1 - ST6 for each of the

memory banks I, II and T.

•

Press TU, menu level 2 will appear in

the display.

On MW/LW, you can also store six stations

each.

•

Press TS briefly.

•

Press TU, menu level 2 will appear in

“T-STORE” will flash in the display.

the display.

The six strongest FM stations will be auto-

matically stored on the memory bank T

(Travelstore). If it is not possible to receive

six stations, the remaining presets will be

marked by four dashes. When this process

•

Press BND to select the waveband.

Use the rocker switch to tune into a

MW, LW

station (either automatically

You can select the stations stored for the

selected waveband directly:

manually << >>).

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

•

by pressing ST1 - ST6.

To select a scanned station and switch To select a scanned station and switch

off Preset Scan: off the Radio Scan function:

Press SCA or the rocker switch briefly. Press SCA or the rocker switch briefly.

To select a station on a different waveband:

•

Press NEXT as often as necessary un-

til the desired memory bank appears

and then select the station by pressing

ST1 - ST6.

If you do not select a station, the scan func-

tion will automatically switch off after the fre-

quency band has been run through com-

pletely. The unit will tune into the station you

were listening to before you started the scan

function.

Scanning stored stations with

Preset Scan

You can have all of the stored stations briefly

scanned on all wavebands and in the se-

lected FM memory bank.

Changing the scan time

Scanning stations with Radio

Scan

The scan time can be set from between five

to a maximum of 30 seconds.

You can also scan all of the stations within

reception range.

Preset Scan cannot be started unless PTY

is switched off (“PTY” is not highlighted in

the display).

Please refer to the section on “DSC pro-

gramming - SCANTIME”.

Radio Scan cannot be started unless PTY

is switched off (“PTY” is not highlighted in

the display).

If necessary, switch off PTY on menu level

2. To do so

Selecting the seek tuning sensi-

tivity

•

press TU and switch off the function by

If necessary, switch off PTY on menu level

2. To do so

pressing the corresponding key.

You can alter the automatic seek tuning

sensitivity.

•

press TU and switch off the function by

To start Preset Scan:

Press SCA for approx. 1 second.

pressing the corresponding key.

•

If “lo” is displayed, the radio will only pick up

strong, local stations (low sensitivity).

To start the Scan function:

Press SCA briefly.

All of the stored stations on the waveband

selected and within reception range will be

scanned one after the other. “SCAN” and

the station name or frequency will flash al-

ternately in the display.

•

If “lo” does not light up, the radio will also

pick up weaker, more distant stations (high

sensitivity).

All of the stations on the waveband select-

ed and within reception range will be

scanned one after the other. “SCAN” and

the station name or frequency will flash al-

ternately in the display.

If you want to alter the sensitivity level,

please refer to the section on “DSC program-

ming - LO/DX”).

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

Switching from stereo to mono

(FM)

PTY - Program Type

with the preset buttons 1-6.

Requirement: PTY must be active.

PTY is an RDS service which an increasing

If reception is poor, you may get better number of broadcasting stations have be-

sound quality by switching from stereo to gun to offer. This feature allows you to se-

mono in the DSC menu. Each time the ra- lect FM stations according to their program

dio is switched on, stereo playback is acti- type. After you have chosen the PTY of your

You can use DSC to select German, Eng-

lish or French as the language used in the

display (refer to the section on “DSC pro-

gramming – PTY LANG”).

vated automatically.

preference, the corresponding stations can

be selected either by seek tuning or using

the scan function.

The following list indicates all of the program

types which are currently available.

The unit will automatically switch to mono if

the signal received is not strong enough for

stereo playback.

The letters printed in bold are identical to

the abbreviation which appears briefly in the

display.

Switching PTY on/off

If you would like to switch to mono, refer to

“DSC programming - STEREO/MONO”.

•

Press PTY.

NEWS

When the function is active, the program

type selected last will briefly appear in the

display, e.g. “SPORT”. As long as PTY is

active, “PTY” will appear permanently in the

display.

The mode selected is indicated briefly in the

display.

CURRENT AFFAIRS

INFORMATION

SPORT

EDUCATE

DRAMA

Automatic bandwidth adjust-

ment (SHARX)

CULTURE

In the DSC menu, you can use the SHARX

function to adjust the bandwidth in the FM

frequency range. This can be a great ad-

vantage when there are a large number of

stations within your current reception range.

SCIENCE

VARIED

POP MUSIC

ROCK MUSIC

EASY MUSIC

LIGHT MUSIC

CLASSICS

OTHER MUSIC

WEATHER

FINANCE

Interference with strong adjacent stations

can be reduced to an absolute minimum if

you activate SHARX ON (factory setting).

Program type

If necessary, refer to the section on “DSC

programming – SHARX”.

Use << >> to have the last selected program

type displayed and to choose a new one.

CHILDREN’S PROGRAMS

SOCIAL AFFAIRS

You can select any one of the stored types

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

a) Using the preset buttons

• During this period press >> (for-

wards) or << (backwards) to select

the desired type.

RELIGION

PHONE IN

TRAVEL

LEISURE

JAZZ MUSIC

COUNTRY MUSIC

NATIONAL MUSIC

OLDIES MUSIC

FOLK MUSIC

DOCUMENT

When PTY is switched on, you can use

the preset buttons ST1 - ST6 to select

the program types stored at the facto-

ry.

• Press << or >> as many times as re-

quired.

• Press one of the presets 1-6.

If you would like to listen to a station

with the selected PTY,

The selected program type will be dis-

played for 2 seconds.

• press

to start the seek tuning

function.

If you would like to listen to a station

with this PTY,

If the radio is unable to find a station offer-

ing the selected program type, the display

will show “NO PTY” and a beep tone will be

emitted. The radio will select the station

which was tuned into before seek tuning was

activated.

Checking the program type of the sta-

tion

• press

to start the seek tuning

function.

On menu level 2

If the radio is unable to find a station offer-

ing the selected program type, the display

will show “NO PTY” and a beep tone will be

emitted. The radio will select the station

which was tuned into before seek tuning was

activated.

•

Press PTY for approx. 2 seconds.

After the beep tone the display will show the

program type offered by the station current-

ly playing.

Storing program types

Each of the preset buttons ST1 - ST6 has

been assigned one program type at the fac-

tory.

If “NONE” appears in the display, the cur-

rent station has no PTY code.

You can assign different program types to

each preset position. Please refer to the next

section on “Storing program types”.

If desired, you can also replace these with

other available program types.

Displaying the selected program type

•

Press << or >>.

To do so, make sure that “PTY” lights up in

the display.

b) Using the << >> buttons on the rocker

The program type selected last will be dis-

played briefly.

switch

•

If necessary, press the PTY button to

switch on the function.

When PTY is switched on, you can se-

lect a program type using buttons

<< >>.

Selecting a program type

Select a program type using buttons

<< >> and

• Press << or >>; the program type se-

lected last will be displayed for 3

seconds.

hold down the desired preset button

(ST1-ST6) until you hear a beep.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operation with RDS (Radio Data System)

Now the selected program type can be re- As soon as it is possible to receive a pro- Note:

called by pressing this preset when PTY has gram in the broadcasting network with the As already mentioned, these functions are

been activated. (“PTY” appears in the dis- PTY selected, the radio will switch over to not supported by all of the RDS stations at

play.)

the corresponding station for the duration the present time.

of the program.

Scanning stations with PTY SCAN

Example: German broadcasting network

NDR:

Requirement: “PTY” must appear in the dis-

play.

•

Press the SCA button.

Station playing: NDR3.

All of the stations in your current reception

area offering the selected program type will

be scanned.

“PTY” lights up in the display.

Program type “POP” selected.

Seek tuning is started.

To switch off PTY-SCAN:

No station with “PTY-POP” can be

found.

•

Press SCA or the seek-tuning rocker

switch once again.

The display shows “NO PTY” and

automatically switches back to NDR3.

NDR2 airs a “PTY-POP” program.

After the entire waveband has been

scanned, the PTY-SCAN function will be

turned off automatically.

The radio will switch to the linked sta-

tion NDR2 for the duration of the

“POP” program.

PTY priority

Situation:

PTY is switched on and lights up in the dis-

play.

During CD operation, the set will also switch

to the program offering the selected PTY

within the broadcasting network.

No station offering the selected program

type can be found currently in your recep-

tion range (with seek tuning or scan).

After the PTY program has ended the sys-

tem will switch back to the previous mode

(radio or CD).

The set will switch back to the station previ-

ously tuned into.

Download from Www.Somanuals.com. All Manuals Search And Download.

Traffic information station reception with RDS-EON

• press a preset button which has a

traffic information station allocated to

it.

The abbreviation “EON” stands for En- Traffic announcement priority

hanced Other Networks, which means that on/off

information is exchanged within a radio net-

If the priority for traffic announcement pro-

work.

Or:

grammes is activated, “TA” will light up in

b) Switch off the priority for traffic an-

nouncements:

Many FM radio stations provide their serv-

the display.

ice area with traffic messages at regular in-

To switch the priority on or off:

• Press TA.

“TA” will disappear from the display.

tervals.

•

Press the TA button.

Along with their programs, all traffic infor-

mation stations transmit a special carrier

signal, which is decoded by your car radio.

If this signal is identified, “TP” will appear in

the display (Traffic program).

If you press TA while a message is being

broadcast, this message will be interrupted.

The unit will then switch back to the previ-

ous mode. The priority for other traffic mes-

sages remains active.

Automatic search function

(Cassette operation)

If you are listening to a cassette and you

leave the reception area for the traffic infor-

mation station you have selected, then the

car radio will automatically search for a new

traffic information station.

If the radio is unable to find a traffic infor-

mation station within 30 sec. after the sta-

tion search has started you will hear a beep

every 30 sec. to alert you to this situation.

Proceed as described above to switch off

the beep.

In addition to these, there are also stations

which do not actually transmit traffic infor-

mation themselves, but by using RDS-EON

it is possible for them to forward the traffic

messages broadcast by another traffic in-

formation station in the same radio network.

Please note that several buttons have no

function while a traffic announcement is

broadcast.

Warning beep

If you leave the reception area of the traffic

information station you are currently tuned

into, you will hear a warning beep at inter-

vals of approx. 30 seconds.

If you want to have the priority for traffic an-

nouncements activated while listening to

one of these stations (e.g. NDR3), “TA” must

appear on the display panel.

This warning beep will also be emitted if you

press a preset button for a station which

does not send the traffic information signal.

Adjusting the volume for traffic

announcements and the warning

beep

If a traffic announcement is broadcast, the

radio will automatically switch to the linked

traffic program station (in this case, NDR2)

for the duration of the message and return

to the original program (NDR3) afterwards.

This volume was preset at the factory, but

you can use the DSC function to alter the

setting as desired (see “DSC programming

- TA VOL”).

Switching the warning beep off

a) Tune into another station offering traf-

fic information:

• Press the rocker switch or

Download from Www.Somanuals.com. All Manuals Search And Download.

Cassette operation

For safety’s sake, the operating Switching Dolby B NR on/off:

Inserting a cassette

panel must always be returned to

the locked position while you are

driving.

•

press

•

Switch on the car radio and release the

operating panel by pressing 1.

The operating panel will fold down forwards.

The noise reduction system manufactured under li-

cence by the Dolby Laboratories Licensing Corpora-

tion. The word DOLBY and the double-D symbol are

trademarks of the DOLBY Laboratories.

•

Insert the cassette with Side A or 1

facing up without the use of force.

Switching on cassette operation

A cassette is inserted, “CC-IN” appears in

the display.

Selecting the display mode

The cassette will automatically be transport-

ed to its playing position. Cassette playback

will begin.

You can switch the display mode during

cassette operation.

•

Press CC, the cassette functions will

appear in the display.

•

Grasp the left-hand side of the operat-

ing panel to fold it back up and lock it

into place.

•

Press DIS briefly.

The display mode selected will appear

briefly in the top line of the display.

Dolby B NR*

This unit can play cassettes which have

been recorded with Dolby B NR or without

the use of noise suppression.

Press DIS as often as necessary until

the desired display mode appears.

Removing a cassette

“COUNTER” – tape counter

“CLOCK” – time

Cassettes which have been recorded with

Dolby B NR* exhibit significantly less tape

noise as well as much greater sound dynam-

ics.

•

With the operating panel in the fold-

down position, press the Eject button

(arrow) briefly.

“ELAPSED” – elapsed playing time for

the tape side

The cassette will eject.

Dolby B NR is active when

in the display.

is highlighted

“REMAIN” – remaining playing time on

the tape side

To prevent damage to the mechanism, do

not attempt to stop or force a cassette while

it is being inserted or ejected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cassette operation

This unit is equipped with a real-time

counter which calculates the current

playing time.

After a new cassette has been insert-

ed, the real-time counter will switch to

a synchronisation phase briefly. During

this time, SYNC will appear in the dis-

play. The synchronisation phase may

vary in length for ELAPSED or

REMAIN.

Scanning cassette titles with

SCAN

Selecting titles with S-CPS

(Super Cassette Program Search)

It is possible to scan the titles on a cassette. To repeat and skip cassette titles.

As soon as you find a title you like, you can

end SCAN. This title will then continue to

play.

SCAN is active when “SCA” is highlighted

in the display. “SCAN” will also appear in

the top line of the display.

Select title

Forwards (CPS-FF ..)

Back (CPS-FR ..)

Track reverse

To change the track during playback:

It is possible to skip up to 9 titles. To do so,

press on the rocker switch as of-

ten as required.

•

Press REV.

•

When the tape reaches the end of a side it

will automatically switch to the other side

(autoreverse). “SIDE A” will appear in the

display for track 1 and “SIDE B” for track 2.

The number of titles to be skipped will ap-

pear in the display.

Starting/ending SCAN:

Press SCA briefly.

•

Make any corrections by pressing the op-

posite key ( / ).

To ensure that this function works properly,

there must be a pause of at least 3 seconds

between titles.

Note:

If there is too much tension on the tape while

it is playing, it may switch to the opposite

track before it has reached the end. Check

to see if the tape is wound correctly. It often

helps to rewind the cassette completely.

Press REV to stop this function immediately.

To ensure that this function works properly,

there must be a pause of at least 3 seconds

between titles.

The scan time is set to 10 seconds at the

factory and can be altered from 5 to 30 sec-

onds. If necessary, refer to the section on

“DSC programming - SCANTIME”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cassette operation

Repeating titles with RPT

Listening to the radio while fast

forwarding or rewinding the tape

with Radio Monitor (RM)

Care instructions

RPT = Repeat

You should use only C60/C90 tape cas-

settes in your car. Protect your cassettes

Repeats the title currently playing. This title

will repeat until RPT is switched off. The You can listen to the radio while fast for- against dirt, dust and temperatures over

Repeat function will end automatically when warding or rewinding the tape (for CPS as 50 °C. Allow cold cassettes to warm up

the cassette is removed or the unit is well) instead of switching the sound to mute. somewhat before playing them to ensure

switched off.

The Radio Monitor function is active when that the tape plays smoothly. Malfunctions

“RM” appears highlighted in the display.

in playback or sound may be caused by dirt

build-up on the pinch roller and the audio

head after approx. 100 hours of operation.

To remove normal dirt build-up clean the

equipment with a cleaning cassette. In more

stubborn cases, use a cotton swab dipped

in rubbing alcohol. Never insert hard instru-

ments into the tape deck.

The Repeat function is active when “RPT”

is highlighted in the display.

Switching Radio Monitor on/off:

•

Press RM, the activated function will

appear briefly in the top line of the dis-

play (RM ON/OFF).

Switching Repeat on/off:

•

Press RPT, the active function will ap-

pear briefly in the top line of the dis-

play (RPT ON/OFF).

Automatically skipping over

blank portions of the tape with

Blank Skip (BLS)

To ensure that this function works properly,

there must be a pause of at least 3 seconds

between titles.

As soon as there is a break of more than 10

sec. during cassette playback, the fast for-

ward function will be activated automatical-

ly to move to the next title.

Fast tape forward/rewind

The Blank Skip function is active when “BLS”

appears highlighted in the display.

Switching Blank Skip on/off:

•

Press BLS, the activated function will

appear briefly in the top line of the dis-

play (BLS ON/OFF).

>> Fast forward

<< Fast rewind

Press REV to end fast forward or rewind.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changer operation

You can use this car radio to conveniently

control CD playback on a Blaupunkt CD

changer.

The following CD changers can be connect-

ed directly: CDC A 06, A 072, A 08.

The CD changers A 05 and A 071 can be

connected with the adapter cable 7 607 889

093.

Also refer to the section on “Enter CD

names”.

Switching on CD changer opera-

tion

Make sure that at least one CD has been

inserted into the magazine.

Selecting CDs and tracks

•

Press CDC, the CDC functions will ap-

pear in the display (track number,

name/playback time).

You can use the rocker switch to conven-

iently select other CDs, tracks or passages.

The CDC A 08 is included with the Hanno-

ver 2000 DJ / Kansas DJ.

Use only standard circular CDs meas-

uring 12 cm in diameter!

CDs measuring 8 cm in diameter or

CDs in different shapes such as a but-

terfly or beer mug are not suitable for

playback using this equipment.

This is very likely to result in the de-

struction of the CD or the CD drive.

We assume no liability for damage to

the equipment caused by playing un-

suitable CDs.

Selecting the CD

down

The numbers of the available CDs will ap-

pear in the display.

Selecting the display mode

During CD changer operation you can switch

the display mode.

Selecting the track

down

•

Press DIS repeatedly until the desired

If you press only once, the track currently

playing will start again.

display mode appears.

“CD10 T3” – CD and track number;

“00:20” Elapsed playing time

“VIVALDI” – CD name

Fast forward, audible (CUE).

Hold >> pressed down for as long as nec-

essary.

“T3”

Track number

“CD10 T3” – CD and track number;

Fast rewind, audible (REVIEW).

Hold << pressed down for as long as nec-

essary.

“14:34”

Clock

The CD name can only be displayed if you

have actually entered one before.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changer operation

Repeat tracks/CDs with RPT

Switching TPM playback on/off

Deleting the TPM memory

RPT = Repeat

You can use TPM to delete stored tracks. If

you want to delete the CD names at the

same time, please refer to “Deleting CD

names/TPM with DSC UPDATE”.

TPM tracks can only be deleted during play-

back.

•

Press TPM briefly. The mode selected

will appear briefly in the display (TPM

ON/OFF).

You can repeat a track or a CD as often as

desired. Use the RPT key to select the fol-

lowing functions:

- REP TRCK = Repeat track

- REP CD = Repeat CD

•

Switch on TPM.

- RPT OFF = Repeat function off

“TPM” will be highlighted in the dis-

play.

•

Press RPT as many times as neces-

sary until you have selected the de-

sired setting.

In this case, “CLR” will appear below

TPM.

If “TPM” is highlighted in the display, this

means that TPM playback is active. All of

the tracks on the CD stored in this operat-

ing mode will be played. If you activate SCA

(scan) as well, these tracks will be scanned.

If you would like to delete the track playing

The CD or the track will repeat until you

press RPT to switch off the function with

“RPT OFF”.

•

press CLR for approx. 2 seconds,

“TRCK CLR” will flash briefly in the dis-

play.

If you would like to delete all of the tracks

on the CD playing

TPM

TPM playback cannot be activated unless

you have already stored tracks with the TPM

function.

(Track Program Memory)

•

press CLR for approx. 5 seconds,

“DISC CLR” will flash briefly in the dis-

play.

Stores and plays your favourite tracks. It is

possible to manage up to 99 CDs with up to

40 tracks.

If you would like to delete all of the tracks

on all of the CDs in the magazine in chang-

er operation

Storing tracks with TPM

A track can only be stored while it is play-

ing.

•

press CLR for approx. 8 seconds,

“ALL CLR” will flash briefly in the dis-

play.

To store a track

•

press TPM for approx. 1 second, “TPM

PROG” will appear in the display.

aomPgrumnegri

mit

DSC

This track has been stored.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changer operation

MIX

SCAN

•

Use the rocker switch

first character.

to select the

You can have the CD tracks played in ran- Use this function to scan all of the CD tracks.

dom order. The MIX function is active when

“MIX” is highlighted in the display.

The capital letters A to Z, the numbers 0 to

9 and special characters will be listed one

after the other.

To start the Scan function:

•

Press SCA briefly, the display will indi-

You can choose the following MIX functions:

MIX CD

cate “SCAN”.

•

Use the rocker switch << >> to move

to the next position and select a char-

acter.

The titles will be scanned one after the oth-

er in ascending order.

The tracks on the selected CD will be played

in random order. The next disc will be se- To stop the Scan function:

You can select up to 7 characters in this way.

lected in numerical order. MIX (random or-

der) applies to the playback of the tracks.

•

Press SCA once again briefly.

Once you have completed the name as de-

sired:

The track currently scanned will continue to

play.

MIX MAG

•

Press ENT in order to store it.

If you would like to name another CD,

press <</>> and use to select the

CDC A 08: All tracks on the CDs in the mag-

azine will be played in random order.

SCAN will also stop if you press the

rocker switch, MIX, RPT, DSC, AUD,

TU or CC.

•

next CD you want to name in the mag-

azine.

CDC A 06 / 072: The CDs in the magazine

are selected at random and then the tracks

on the CD selected are played in random Entering CD names

You can change a name by entering and

storing a different one (overwrite).

order.

In the changer mode you can give up to 99

MIX OFF

If you would like to finish your entry,

CDs an individual name.

•

press DSC to quit the DSC menu.

The Mix function is deactivated. Discs and

titles will be selected in numerical order.

The specified name (e.g. VIVALDI) will ap-

pear in the display if you have selected the

corresponding display mode with DIS.

To alter the setting:

To start the entry:

•

Press MIX briefly, the function selected

will appear briefly in the display.

•

Press the DSC button and press

as often as necessary until “CD-

NAME” appears in the display.

•

Press << >>.

The position for the first character will begin

to flash.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changer operation

Deleting CD names/TPM with

DSC UPDATE

To return to “CD UPDATE” in the DSC menu

without deleting the CD names and TPM:

•

Press ENT.

Use the DSC UPD (update) feature to de-

lete the CD names and the TPM at the same

time.

You can delete the name stored for the CD

in the CD drive and its TPM with “CLR

DISC”.

Use “CLR ALL” to delete the names and

TPM for all of the CDs.

•

Insert a CD whose data you would like

to delete (name and TPM).

•

Press DSC.

Press

as many times as required

until “CD UPDATE” appears in the dis-

play.

•

Press >> to select “CLR DISC” if you

want to delete the name and TPM of

that CD,

•

Press << to select “CLR ALL” to delete

the names and TPM stored for all of

the CDs.

•

Press ENT for approx. 1 second.

“DELETING” will appear briefly in the

display.

The deletion process is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock - Time

Displaying the clock

The time will be set automatically by RDS-

CT, but can also be adjusted manually if

desired.

This car stereo is equipped with a built-in

clock which automatically takes advantage

of RDS to ensure highly accurate time-keep-

ing (hours, minutes).

You can set the clock to permanent display

in both the radio and CD modes.

You need only set the time manually if it is

not possible to receive an RDS station with

CT (clock time).

Radio mode:

For the clock to function properly with RDS,

an RDS station with the CT function (CT –

clock time) must be received.

You can switch between clock display and

waveband (incl. memory bank for FM). To

do so

If you want to set the time manually, refer to

the section on “DSC programming - CLOCK-

SET”.

The automatic correction of the time can be

switched off.

•

press DIS for approx. 2 seconds.

Cassette operation:

Deactivating the hour correction

function

Setting the clock

You can select from four different display

modes.

a) automatically

In the DSC menu it is possible to switch off

the hour correction function with “CLK MAN/

CLK AUTO”. An automatic correction for

minutes will continue to take place.

The clock is set automatically when the To switch to the clock

radio is tuned into an RDS station

which has the “CT” function (clock

time).

•

press DIS repeatedly until CLOCK ap-

pears in the top line of the display.

Changer operation:

This is useful if you would like to display the

time for a different time zone, for example.

You can select from three different display

modes.

b) manually with DSC-CLOCKSET

If necessary,

• Press DSC briefly, “CLOCKSET” will

appear in the display.

•

Press DSC briefly and

To switch to the clock

•

press DIS as often as necessary.

Press as often as required until

• Press << >> to set the hours/min-

utes. You can move to a different po-

sition by pressing / .

“CLK MAN/CLK AUTO” appears in the

display.

Correcting the clock after the

power has been disconnected

To deactivate the hour correction function

press << >> to select “CLK MAN”.

• After you have set the clock, press

ENT briefly to store the new setting.

If the radio has been disconnected from its

power source for a longer period of time,

“0:00” will appear in the display when it is

re-connected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the equaliser

The individual steps you have to take to select HIGH EQ for treble and mid-range

make these settings are described in the tones.

The acoustic characteristics of the car inte-

rior affect the quality of the sound repro-

duced in your vehicle to a much greater ex-

tent than the speakers.

table.

The “HIGH EQ” and “LOW EQ” filters can

be set in the DSC menu:

Notes on making the settings

Position, installation and the rear volumes

of, for example, the door or rear window

shelf all play an important role.

•

Press DSC.

Press as often as necessary until

“HIGH EQ” or “LOW EQ” appears in

the display.

The following notes are intended as recom-

mendations only. They do not necessarily

reflect your own personal sound preferenc-

es.

Even the sound produced by well selected

and installed speakers can be affected neg-

atively by resonance frequencies in the ve-

hicle interior.

•

Press << or >> once and

We recommend that you use a music cas-

sette/CD which you are familiar with to ad-

just the filters. The cassette/CD should in-

clude different types of musical instruments

and vocals. Purely electronic music is not

well suited to serve as a basis for making

the settings because the original sounds

cannot be determined.

Set the level in the following table by

pressing / .

As a result, the bass sounds may be lost or

reverberate, the mid-range tones sound too

overpowering and music instruments or

voices may be distorted or the total sound

quality may be completely lifeless.

•

Press << >> to switch the frequency

range.

Press ENT to store your settings.

You can switch the equaliser on and off by

pressing AUD for approx. 2 seconds.

The overall sound quality can be greatly

enhanced if certain frequencies are sup-

pressed or boosted.

Before you set the equaliser, set bass, tre-

ble, balance and fader to “0”.

Now you can compare the sound produced

by your car stereo with and without the

equaliser.

This car stereo is equipped with 2 paramet-

This setting is described in the Quick Refer-

ric filters. The first filter “LOW EQ” can be ence under 8 AUD.

set from 32 to 500 Hz, the second filter

Setting recommendations on the

Internet

Now listen to the cassette/CD you have se-

lected.

“HIGH EQ” from 630 to 10000 Hz. In this

context, parametric means that it is possi-

ble to set the frequency and either boost or

reduce it (+10 to –20 dB) individually for

each of these filters.

Evaluate the sound according to your own

personal preferences.

Refer to our home page on the Internet

http://www.blaupunkt.de

Now refer to “Sound impression/problem” in

the table and you will find suggestions to

eliminate any problems under “What to do”.

to find setting recommendations for new

vehicles on the market.

These parametric filters can be adjusted to

very exact settings even without the help of

measuring instruments.

Make the settings for bass and the lower

mid-range tones with the LOW EQ filter,

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the equaliser

Assistance in setting your equaliser

Start to make your settings in the mid-range/treble and end it with the bass range.

Frequency range

Sound impression/problem

What to do

Notes

Bass

30 – 100 Hz

Bass reproduction too weak

Boost the bass with the

“LOW EQ” filter

Frequency: 50 to 100 Hz

Level: +4 to +6 dB

Avoid distortion.

Boost the level carefully if the

speaker diameter is too small.

Lower mid-range

100 – 400 Hz

Unclear bass

Playback reverberates

Unpleasant pressure on the ears

Reduce the lower mid-range

with the “LOW EQ” filter

Frequency: 125 to 400 Hz

Level: approx. –4 dB

The tone may become too lean

and aggressive.

Pay attention to the underlying

tone of the music.

Mid-range sound

400 – 4000 Hz

Sound appears to be too much in Reduce the mid-range with

Playback should not be too

quiet.

Tone too powerless.

the foreground, very aggressive,

no stereo effect

“HIGH EQ” filter

Frequency: 1000 to 2500 Hz

Level: -4 to –6 dB

Treble

4000 to 20000 Hz

Lifeless reproduction

Lack of transparency

Instruments do not sparkle

Boost treble range with

“HIGH EQ” filter

Frequency: approx. 10 kHz

Level: +2 to +4 dB

Avoid a piercing type of tone.

Strong hissing sound unpleas-

ant.

Download from Www.Somanuals.com. All Manuals Search And Download.

DSC programming

CD NAME

SHARX

Appears during changer op-

eration only.

Use this function to name

your CDs. (See “Entering

CD names”)

LOW EQ

HIGH EQ

TA VOL

Equaliser setting:

The car stereo has been equipped with DSC

(Direct Software Control) to allow you to

customise certain programmable, basic set-

tings to suit your personal needs and pref-

erences and then store them.

The basic settings for this audio equipment

were made at the factory.

In the following you can find an overview of

these settings, so that you can always reset

to them if desired.

To activate the frequencies

and set the level for the low-

er frequency range.

Refer to the detailed instruc-

tions in the section on

“Equaliser setting”.

Switches the bandwidth in

the FM frequency range.

When there are a large

number of stations within

your current reception

range, use << >> to switch

to SHARX ON which will

prevent most interference

from adjacent radio stations.

This function has been set

to “SHARX ON” at the facto-

ry.

Equaliser setting:

To activate the frequencies

and set the level for the up-

per frequency range.

Refer to the detailed instruc-

tions in the section on

“Equaliser setting”.

If you wish to alter any of the programming,

•

press DSC.

Use the rocker switch and the ENT button

to select and adjust the functions de-scribed

in the following. The display will show you

the setting you have selected.

To adjust the traffic an-

nouncement and warning

beep volume from between

0 to 66.

The message will then come

through at this volume, if the

standard volume is lower.

If the standard volume is set

higher than the TA VOL lev-

el, then the traffic report will

be played at the standard

volume.

HICUT

Interference-related cut in

the treble sound. Cuts the

treble when interference oc-

curs. Can be adjusted from

NO HICUT (OFF) to HICUT

3 (highest setting). Which

setting is the most pleasant

is a matter of personal pref-

erence.

Select function

<< / >> Adjust/recall value

Download from Www.Somanuals.com. All Manuals Search And Download.

DSC programming

LO/DX

To adjust the seek tuning

sensitivity.

CLK AUTO/MAN

Switches the hour correction

The volume can be adjusted

from between 0 to 9.

(0 = off)

function on/off. Read the in-

formation in the section on

“Clock, Deactivating the

hour correction function”.

“LO” stands for local recep-

tion.

“DX” stands for distant re-

ception.

Select “LO 3” if you want to

receive strong stations in

the local area, select “DX 1”

if you want to tune into

weaker stations which are

further away.

DIM DAY

Use this function to select

the display brightness for

the daytime (from 1 to 9).

12/24H MODE

Select the clock display

(12 or 24-hour display)

DIM NIGHT Use this function to select

the display brightness for

the night-time (from 1 to 9).

CLK ON/OFF The clock display will ap-

pear when the ignition is

The brightness changes ac-

cordingly when the car

headlights are switched

on/off.

switched on, but the car

stereo is switched off. In this

case, set CLK ON.

STEREO/MONO

Switch modes by pressing

<< >>.

ANGLE

Adjusts the display to the in-

dividual viewing angle.

The mode selected will ap-

pear briefly in the display.

The radio will begin with

STEREO playback each

time it is switched on.

ON VOL

Use this function to select

the volume at which the ra-

dio is set when it is switched

on.

Adjust the desired volume

level with << >>.

When adjusted to “LAST

VOL”, the system will come

on at the volume selected

before it was switched off.

SCANTIME Use this function to set the

scan time for the radio or

CD player from 5 to 30 sec-

onds.

CLOCKSET To set the clock manually.

Press << >> to set the

hours/minutes. Move to the

next flashing position by

pressing / . To store the

setting selected, press ENT

briefly.

PTY LANG Select the language used

for program type identifica-

tion:

German, English or French.

BEEP

Acknowledgement tone for

all functions which require a

button to be pressed for

more than one second.

Also refer to the section on

“CLOCK”.

Download from Www.Somanuals.com. All Manuals Search And Download.

DSC programming

AUX ON/OFF(for Kansas DJ, Chicago

RCM 169)

(See the section on “Short

Additional Memory S.A.M.”).

If you remove the KeyCard

during the reading process,

“READ KC” will appear on

the display panel.

UPDATE

Allows you to delete CD

names during changer oper-

ation to make room for new

CDs. (Refer to “Deleting CD

names with DSC-UP-

DATE”.)

This menu item will not ap-

pear unless a CD changer

has been connected to the

system. The factory setting

is “OFF”.

If another system compo-

nent is connected to AUX,

this setting must be altered

to “AUX ON”.

LED ON/OFF Here you can choose be-

tween LED ON or LED OFF.

With LED ON, the “ON”

To quit the DSC programming mode and

store the adjustment:

•

Press DSC.

knob will flash for extra anti-

theft protection when the

LEARN KC To “train” a second Key-

Card.

unit has been switched off

and the KeyCard removed.

Please read the information

in the section on “KeyCard

theft protection system” -

“Training a second Key-

Card”.

PEAK ON/OFF

Switches the dynamic level

display for the volume on/

off.

TOM ON/OFFIf you have a second Key-

Card with a Turn-On Mes-

sage, you can switch off this

information with “TOM

READ KC

To read out the KeyCard

data.

The card supplied with the

radio is used to display the

model name, type number

(7 6 …) and the serial

number.

With the extra card it is pos-

sible to display data entered

by your specialised dealer.

OFF”. The factory setting is

“TOM ON”.

For more information refer

to “ KeyCard theft protection

system” - “Turn ON Mes-

sage (T.O.M.)”.

Download from Www.Somanuals.com. All Manuals Search And Download.

DSC programming

Specifications

Overview of the DSC factory set-

tings

Amplifier

Output power:

4 x 25 W RMS power

acc. to DIN 45324 at

14.4 V

LOW EQ

HIGH EQ

TA VOL

0 dB/40 Hz

0 dB/630 Hz

4 x 40 W max. power

CD NAME

SHARX

HICUT

LO / DX

STEREO/MONO

CLOCKSET

Tuner

SHARX ON

HICUT 2

DIST 1

STEREO

0:00

Wavebands:

87.5 - 108 MHz

531 - 1602 kHz

153 - 279 kHz

CLK AUTO / MAN CLK AUTO

FM sensitivity:

0.7 µV at 26 dB

signal-to-noise ratio

12/24H MODE

CLK ON/OFF

ON VOL

24H MODE

CLK OFF

LAST VOL

FM frequency response:

20 - 16000 Hz

BEEP

DIM DAY

DIM NIGHT

ANGLE

SCANTIME

PTY LANG

AUX

LEARN KC

READ KC

LED

PEAK ON/OFF

TOM ON/OFF

UPDATE

Tape

10 sec.

DEUTSCH

OFF

Frequency

response:

30 - 19000 Hz

Subject to modifications!

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary - Technical Terminology

AF - Alternative Frequency

CPS – Cassette Program Search

EON – Enhanced Other Network

In RDS, EON makes it possible to exchange

station information within a station network.

Traffic information, for example, can be for-

warded automatically from a traffic informa-

tion station to a station which does not

broadcast traffic information in the same

network. After the traffic announcement has

been put through, the radio switches back

to the original station.

In RDS this function ensures that the radio Repeats and skips cassette titles. Use S-

always tunes into the frequency with the best CPS to select specific cassette titles.

reception for the station.

Dolby B NR

Amplifier

The noise reduction system manufactured

Amplifies the output power.

under licence by the Dolby Laboratories Li-

censing Corporation.

The word DOLBY and the double-D symbol

AUD – Audio

Sound settings for bass and treble, balance

(left/right) and fader (front/rear).

(

) are trademarks of the DOLBY Labora-

tories.

Equalizer

Cassettes which have been recorded with

Dolby B NR* exhibit significantly less tape

noise as well as much greater sound dynam-

ics.

Autoreverse

Adjusts the frequencies to the acoustic con-

ditions and personal tastes.

See Reverse.

EXIT

BLS – Blank Skip

DSC – Direct Software Control

Press to end/cancel a setting.

Automatically skips longer portions of blank

tape during cassette operation, e.g. at the

end of the tape.

With the help of DSC it is possible to adjust

the basic factory settings to your own per-

sonal preferences.

KeyCard

Theft protection system from Blaupunkt. The

car stereo cannot be operated without the

correct KeyCard.

BND (Band)

Switches between wavebands and memo-

ry banks.

Real-time counter

Provides a precise calculation of the current

playing time.

MIX

Changer

CDs/CD tracks are played in random order.

CD changer

ENT (Enter)

MUTE

Press briefly to accept/store settings.

CL – Clear

Switches audio off

Returns to the previous menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary - Technical Terminology

Preset Scan

Reverse

TA - Traffic Announcement (priority for traf-

fic information)

See Scan

Switches the tape running direction during

cassette playback.

“TA” in the display indicates that the priority

Autoreverse automatically switches to the for traffic announcements has been

PTY

Designed for the selection of a specific type other side at the end of the tape.

of program in FM (e.g. sports, news). Also

see RDS.

switched on. Also see RDS.

RM – Radio Monitor

TP - Traffic Program

Automatically switches to radio playback “TP” in the display indicates that the radio is

while the tape is fast forwarding or rewind- tuned into a station which broadcasts traffic

RDS – Radio Data System

Service provided by radio stations to en- ing.

hance radio listening pleasure.

information. Also see RDS.

RPT (Repeat)

TPM – Track Program Memory

The station name, for example, is displayed

instead of the frequency.

Repeats CD tracks. In changer operation Stores and plays your favourite tracks in CD

you can repeat single tracks or complete or changer mode.

CDs.

Other RDS functions include:

AF – Alternative Frequency

EON – Enhanced Other Networks

Radio text

REG – Regional program

PTY – Program type

TS – Travelstore

SCAN

Automatically stores the stations with the

Briefly plays the radio stations in your cur- best reception on the station preset buttons.

rent reception range or the tracks on a CD Very useful during trips.

in CD mode. Using Preset Scan you can

TA – Traffic Announcement

TP – Traffic Program

scan the radio stations stored on the preset

buttons.

REG

S-CPS – Super Cassette Program Search

Regional programs have priority. REG ON

stops the radio from automatically switch-

ing to a different regional program broad-

cast by the same station because it has

better reception. Also see RDS.

See CPS.

Softkey (Software key)

Key with varying functions

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Display 46, 51

Display brightness daytime/night-time 78

Displaying the radio pass data 56

Dolby B NR 67

Accessories 54

Adjusting the volume for traffic

announcements 66

LO/DX 62

Lost KeyCard 57

Loudness 50

Adjusts the display 78

Alternative frequency 59

Assistance in setting your equaliser 76

Automatic bandwidth adjustment 63

Automatic tuning 60

ENT 47

Entering CD names 72

EON 66

Equaliser 75, 76

EXIT 47

Manual tuning 60

Menu level 46

MIX 72

Mono 63

MUTE 45

Bandwidth adjustment 63

Blank Skip (BLS) 69

BND 46

Factory settings 80

Fast tape forward/rewind 69

Operating mode 58

Operating panel is unlocked 45

Optimising display 58

Care instructions (Cassette) 69

Care of your KeyCard 57

Cassette operation 67

Changer operation 70

Changing the memory bank 61

Clock 74

Glossary 81

Guarantee 54

Preset Scan 62

Program type 63

PTY 63

PTY priority 65

PTY SCAN 65

HICUT 77

CODE-ERR 57

CPS 68

Installation 54

International telephone information 54

Radio Data System 59

Radio Monitor (RM) 69

Radio operation with RDS 59

Radio Scan 62

Damaged KeyCard 57

Deleting CD names 73

Deleting TPM 73

DIS 50

KeyCard 55

RDS-EON 66

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Regional programs 59

Remote control unit 53

Repeat (Cassette) 69

Repeat (Changer) 49

Repeating CDs 71

Switching the unit on with the ignition

switched o 45

Technical Terminology 81

Telephone information 54

Telephone mute 54

Theft protection 56

Theft protection system 55

Time 74

Repeating titles (Cassette) 69

Repeating tracks 71

S-CPS 68

SCAN 72

TPM 71

Scan time 62

Track reverse 68

Scanning cassette titles with SCAN 68

Scrolling through the broadcasting net-

works 60

Seek tuning sensitivity 62

Selecting CDs 70

Traffic information station reception 66

Traffic safety 54

Training the new KeyCard 57

Travelstore 61

Turn On Message (T.O.M.) 56

Selecting the display mode (Cassette) 67

Selecting the display mode (Changer) 70

Selecting titles (Cassette) 68

Selecting tracks (Changer) 70

Setting recommendations on the

Internet 75

SHARX 63

Short Additional Memory (S.A.M.) 56

Softkeys 46

UPDATE 73

Visual theft protection 52

Volume 46

Station tuning 60

WAIT 1h 57

Stereo 63

Warning beep 66

Waveband 60

Storing stations 61

Switching the sound on/off 45

Download from Www.Somanuals.com. All Manuals Search And Download.

Service-Nummern / Service numbers / Numéros du service après-vente / Numeri del servizio di assi-

stenza / Servicenummers / Telefonnummer för service / Números de servicio / Número de serviçco

Tel.:

Fax:

Deutschland

Belgique

France

Nederland

Great Britain

Denmark

Sverige

018 050 002 25

025 255 444

014 010 70 07

023 565 63 48

018 958 383 66

44 89 83 60

051 214 940 02

025 255 448

014 010 73 20

023 565 63 31

018 958 383 94

44 89 86 44

08 750 15 00

66 81 70 00

08 750 18 10

66 81 71 57

Norway

Suomi

Österreich

Greece

094 359 91

045 989 90 28

015 762 241

094 359 92 36

016 103 93 91

015 769 473

âeská republika

USA

Singapore

Slovensko

026 130 04 41

800-266 25 28

006 535 054 47

042 175 873 212

026 130 05 14

708-681 71 88

006 535 053 12

042 175 873 229

Blaupunkt-Werke GmbH

Bosch Gruppe

11/99

K7/VKD 8 622 402 227

Download from Www.Somanuals.com. All Manuals Search And Download.

BenQ Projection Television PB6240 User Manual
Best Ventilation Hood WC26E Series User Manual
Black Box Computer Hardware ACS20001A R3 User Manual
Bosch Appliances Cooktop PCL 785 FAU User Manual
Bostitch Air Compressor CWC100 User Manual
Breville Mixer ABN77000085549 User Manual
Brinkmann Charcoal Grill PROFESSIONAL STAINLESS STEEL Charcoal Grill User Manual
Campbell Hausfeld Air Compressor IN718303AV User Manual
Casio Digital Camera ex zs6 User Manual
Chicago Electric Grinder 98107 User Manual