KS890E
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Page 4 Safety instructions
Double insulation
Page 5 Electrical safety
Mains plugreplacement
Extensioncables
Unwantedtools andthe environment
The Black&Deckerguarantee
Page 6 Accessories
Technical data
Features
Removal&refittingthe blade
Page7 Removingthe blade
Fittinga blade
OperatingyourScorpionSaw
RecommendedMaterials
Page8 Cleaning
ECdeclarationofconformity
Page9 Service Sheet
Page10 Black&Deckerphone numbers andaddresses
Page11 Guarantee card
Download from Www.Somanuals.com. All Manuals Search And Download.
Scorpion Saw user manual
SAFETYINSTRUCTIONS
Follow the instructions for lubricating and changing
Warning!Whenusingelectric tools,the following
basic safetyprecautions shouldalways be takento
reduce the riskoffire,electric shockandpersonal
injury.Readallthese instructions before attemptingto
operate the productandsave this booklet.
accessories. Inspect the tools cord periodically
and, if damaged, have repaired by an authorised
service facility. Inspect the extension cord
periodically and replace if damaged. Keep the
handles dry, clean and free from oil and grease.
Disconnect the tool when not in use, before
servicingandwhenchangingaccessories suchas
blades,bits andcutters.
Avoidunintentionalstarting.Donotcarrya
plugged-intoolwitha fingeronthe switch.
Ensure the switchis offwhenpluggingin.
Use an outdoor extension cord.When a toolis used
outdoors,onlyuse anextensioncordintendedfor
outdooruse andsomarked.
Stayalert.Watchwhatyouare doing, use common
sense and do not operate the toolwhen tired.
Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should
be carefully checked to determine whether it will
operate properly and perform its intended
function. Check for alignment of moving parts,
free running of moving parts, breakage of parts,
mounting and any other conditions that may affect
its operation. A guard or other part that is
damaged should be properly repaired or replaced
by an authorised service centre unless otherwise
indicated in the product booklet. Have defective
switches replaced by an authorised service
centre. Do not use the tool if the switch does not
turn it on and off.
•
•
•
For safe operation:
•
Keepthe workarea clean.Clutteredareas and
benches invite injuries.
•
Considerthe workarea environment.Donotexpose
the power tool to rain and do not use in damp or wet
locations. Keep the workarea welllit. Do not use
the power tool where there is a risk to cause fire
orexplosion.
•
•
•
Guardagainstelectric shock.Avoidbodycontact,
where possible,withearthedorgroundedsurfaces
(e.g.pipes,radiators,ranges andrefrigerators).
Keepchildrenaway. Donotletvisitors touchthe
toolorextensioncord.Allvisitors shouldbe kept
awayfromthe workarea.
Store idle tools. When not in use, tools should be
stored in a dry, high or locked place, out of reach
ofchildren.
•
•
•
•
Do not force the tool. It will do the job better and
more safelyat the rate for which it was intended.
Use the right tool. Do not force small tools or
attachments to do the job of a heavy duty tool.
Do not use the toolfor purposes not intended;for
example, do not use a circular saw or Scorpion Saw
to cut tree limbs or logs.
•
Dress properly.Donotwearloose clothingor
jewelleryas theycanbe caughtinmovingparts.
Rubbergloves andnon-skidfootwearare
recommended when working outdoors.
Wear protective hair covering to contain long hair.
Use safety glasses. Use a face or dust mask as
well, if the operation is dusty or if the tool is being
used in enclosed spaces.
Do not abuse the cord. Never carry the tool by its
cord or yank it to disconnect it from the socket.
Keep the cord away from heat, oil and sharp edges.
Secure the work. Use clamps or a vice to hold the
work. It is safer than using a hand and it frees both
hands tooperate the tool.
•
•
Warning!The use ofanyaccessoryorattachment,
otherthanrecommendedinthe productbooklet,
maypresenta riskofpersonalinjury.
Have the tool repaired by a qualified person.
The electrical tool is in accordance with the
relevant safety requirements. Repairs should only
be carried out by qualified persons using original
spare parts, otherwise, this may result in
considerable danger to the user.
•
•
•
Save these instructions!
DOUBLE INSULATION
The toolis double insulated.This means thatall
the externalmetalparts are electricallyinsulated
fromthe mains power supply. This is done by
placinginsulationbarriers betweenthe
electricalandmechanicalcomponents makingit
unnecessaryforthe tooltobe earthed.
•
•
Donotoverreach.Keepproperfootingandbalance at
alltimes.
Maintainthe toolwithcare.Keepa cuttingtool
sharp and clean for better and safer performance.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Note: Double insulation does not take the place
of normal safety precautions when operating the
tool. The insulation system is for added protection
against injury resulting from a possible electrical
insulation failure within the tool.
Warning! Never connect live or neutral wires to the
earth pin marked E or
.
MAINS PLUG REPLACEMENT
(AUSTRALIAANDNEWZEALANDONLY)
Should the mains plug or cordset ofthe product be
damaged,itmustonlybe replacedbyanauthorised
Black&Deckerservice agentbecause special
purpose tools are required.
ELECTRICAL SAFETY
Be sure the supply is the same as the voltage given on
the rating plate. The toolis fitted with a two-core cable
andplug.
EXTENSIONCABLES
Up to 30m(100ft)of3-core extension cable can be used
withoutundue loss ofpower.
Note:Anextensioncable shouldnotbe usedunless
absolutelynecessary.Use ofanimproperextension
cable could result in a riskoffire and electric shock.
If an extension cable must be used, make sure it is
properlywired,contains the correctratedfuse as
recommendedinits literature andis ingood
electrical condition.
MAINSPLUGREPLACEMENT(UKONLY)
Shouldthe mains plugneedreplacingandyouare
competenttodothis,proceedas instructedbelow.
Ifyou are in doubt, contact a Black&Decker service
centre ora qualifiedelectrician.
•
•
Disconnectthe plugfromthe powersupply.
Cut off the plug and dispose of safely. A plug with
baredcopperconductors is verydangerous if
engagedina live socketoutlet.
•
•
OnlyfitBS1363Aapprovedplugs fittedwiththe
correctlyratedfuse.
Note:Fuses donotgive personalprotectionagainst
electric shock.
The cable wire colours, or a letter, willbe marked at
the connectionpointofmostgoodqualityplugs.
Attachthe wires totheirrespective points inthe
plug (see diagram). Brown is L (live) and blue is N
(neutral).
PROTECTING THE ENVIRONMENT
Black & Decker provides a facility for recycling
Black & Decker products once they have
reached the end of their working life.
This service is provided free of charge. To take
advantage of this service please return your
product to any authorised repair agent who
will collect them on our behalf.
Fit a 5 amp fuse
approved
Fit a BS1363A
approved
E
L
to BS1362
resilient plug
You can check the location of your nearest authorised
repair agent by contacting your local Black & Decker
office at the address indicated in this manual.
Alternatively, a list of authorised Black & Decker
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
N
Connect
blue to
N (neutral)
Connect
brown to
L (live)
Make sure that the
outer sheath of the
cable is held firmly
by the clamp
230 volts AC only
Never use a light
socket
GUARANTEE
Black & Decker is confident of the quality of its
products and offers an outstanding guarantee.
This guarantee statement is in addition to and in no
way prejudices your statutory rights. The guarantee
is valid within the territories of the Member States of
the European Union and the European Free Trade Area.
•
Before replacingthe topcoverofthe plugensure
thatthe cable restraintis holdingthe outersheathof
the cable firmlyandthatthe twoleads are correctly
fixed at the terminalscrews. Ifthe fuse cover is
missing or damaged do not use the plug.
Forreplacementordetachable fuse covers,contact
a Black & Decker service centre.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
If a Black & Decker product becomes defective due
to faulty materials, workmanship or lack of conformity,
within 24 months from the date of purchase,
Black & Decker guarantees to replace defective
parts, repair products subjected to fair wear and tear
or replace such products to ensure minimum
inconvenience to the customer unless:
FEATURES
1.
2.
3.
4.
5.
6.
7.
8.
9.
Variable speed switch
Lock-off button
Shoe plate
Dust blow
Blade release
Soft grip
Second hand position
Large capacity blade
Curve cutting blade
•
The product has been used for trade, professional
or hire purposes;
•
•
The product has been subjected to misuse or neglect;
The product has sustained damage through
foreign objects, substances or accidents;
Repairs have been attempted by persons other
than authorised repair agents or Black & Decker
service staff.
10. Metal cutting blade
Your Scorpion Saw includes some or all of these
features.
•
To claim on the guarantee, you will need to submit
proof of purchase to the seller or an authorised repair
agent. You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker office at the address indicated in
this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on the
7
2
6
1
4
ACCESSORIES
3
2
5
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get
the very best from your Black & Decker product.
8
9
10
Note: This user manual also covers catalogue
numbers with a letter suffix. Refer to your carton for
details of your product.
TECHNICAL DATA
The level of sound pressure of the tool is in accordance
with EEC legislation. It is recommended that you take
appropriate measures for the protection of your hearing
if the sound level seems uncomfortable. This normally
equates to a sound pressure in excess of 85dB (A).
BEFORE USING YOUR SAW THINK!
Before you start cutting make sure that the area you
are going to cut is clear of all obstacles particularly
on the reverse side of the cut.
If you use the saw with one hand always ensure your
free hand is away from the cutting area.
KS890E
Volts (V)
Watts
Current(A)
SPM (/min)
Stroke (mm)
230
400
1.8
0-5500
10
REMOVAL & REFITTING THE BLADE
Your Scorpion Saw has a new blade clamping
mechanism. Before using the saw familiarize
yourself with the removal of the blade and refitting
the blade securely in the saw.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Always ensure the unit is unplugged from the power
supply when changing blades.
Always ensure the tooth protector is fitted when
changing blades.
OPERATING YOUR SCORPION SAW
Variable speed trigger switch
Your Scorpion Saw is equipped with a variable speed
trigger switch that allows you greater control over
start of cut, rate of cut and breakthrough of cut.
To switch your Scorpion
REMOVING THE BLADE
Ensure blade has cooled
after use. Press and hold
the rear of the blade
release button fully, hold
the back of the blade
and rotate the blade
through 90° as shown in
the diagram. Slide the
blade sideways off the
retaining pin and
Saw on, push lock-off
button (2) and squeeze
the on/off variable
speed trigger switch (1).
To switch off, release
the trigger, the unit will
automatically lock-off.
Standard Mode
To obtain the best results
from your Scorpion Saw,
use the same backward
and forward movement
you would employ with
a traditional hand saw.
This will enable a quicker cleaner cut.
remove from the saw.
FITTING A BLADE
Place the blade with the
tooth protector fitted
over the location pin. The
blade teeth should be
facing the handle.
Rotate the blade through
90° until it is fully located
in the slot and the
Operating in Jigsaw Mode
Disconnect unit from
power supply. Remove
blade, rotate shoe
through 270˚ and secure
in position. Fit curve
cutting blade.
location pin is in the
locked position.
To ensure the blade is
securely fitted try to
remove without pressing
the blade release button.
Remove the tooth
Remove tooth protector
and your Scorpion Saw
is now ready for use.
Cutting Metal
Your Scorpion Saw can be used for cutting light
gauge ferrous and non-ferrous metals such as
copper, brass, aluminium, etc. See recommended
materials.
protector, your saw is
now ready for use.
Note: If you are unable to fit the blade, check if the
location pin is in the correct position as shown
below. If it is not, keep the blade release button
depressed and use a screwdriver to turn the location
pin into the correct position.
It is advisable when cutting thin sheet to clamp a
backing sheet of soft wood or plywood to the work
as this will enable you to obtain a cleaner cut. Both
metal and wood backing are sawn together. Do not
force the cutting blade into the metal as this will
reduce the life of the blade and possibly damage the
motor. Cutting thin metal will take longer than cutting
even a relatively thick piece of wood, so do not be
tempted to speed up the operation by forcing the
saw. Spread a thin film of oil along the proposed
cutting line before cutting.
Only use the metal cutting blade for this purpose.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
RECOMMENDED MATERIALS
Recommended materials
Capacity
Large capacity blade
Soft wood
Up to 100mm x 100mm
Plastic soil pipe
Up to 125mm Ø
Curve cutting blade
Worktop
Up to 50mm
Metal cutting blade
Ferrous/non-ferrous metals Up to 3mm thick
CLEANING
Disconnect your Scorpion Saw from the power
supply. Use only mild soap and a slightly damp cloth
to clean your Scorpion Saw. Many household
cleaners contain chemicals which could seriously
damage the plastic. Also, do not use petrol,
turpentine, lacquer or paint thinners or similar
products. Never let any liquid get inside the tool and
never immerse any part of your Scorpion Saw into
liquid.
EC DECLARATION OF CONFORMITY
We declare thatunit:KS890Econforms to
98/37/EC,89/336/EEC,EN55014,
73/23/EEC, EN50144, EN61000
A weighted sound pressure 87dB (A)
A weighted sound power 100dB (A)
Hand/arm weighted vibration 3.4m/s2
Kevin Hewitt
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
United Kingdom
The Black & Decker policy is one of continuous
improvement to our product and as such we reserve
the right to change the product specification without
prior notice.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TYP.
KS890E
1
139
131
130
140
129
144
143
103
134
131
125
126
127
128
120
141
121
122
142
123
124
102
132
133
101
101
138
104
105
106
107
108
110
118
111
112
108
109
113
117
116
114
115
E12904.FH5
14-02-00 CW
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Australia
DEWALT Industrial Power Tool Company
7 Clarice Road
Tel. 03 9895 9200
Fax 03 9899 7465
Box Hill, Victoria 3128
New Zealand
South Africa
Black & Decker
81 Hugo Johnson Drive
Penrose, Auckland, New Zealand
Tel. 09 579 7600
Fax 09 579 8200
Black & Decker South Africa (Pty) Ltd
Physical address:
Tel. (011) 653-1400
Fax (011) 653-1499
39 Commerce Crescent
Eastgate, ext. 12, Sandton, Kramerville 2148
Postal address:
Postnet Suite 107, Private Bag X65
Halfway House 1685
United Kingdom
Black & Decker
210 Bath Road
Slough, Berkshire SL1 3YD
Tel. 01753 511234
Fax 01753 551155
Helpline 01753 574277
Part No: 571143-01
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Part No: 571143-01
Download from Www.Somanuals.com. All Manuals Search And Download.
|