June 2010
FMT700
Shielded Category 6A Jack
Use these instructions to terminate your shielded
Category 6A jacks.
What’s Included
Your package should contain the following items. If anything is missing or damaged,
contact Black Box Technical Support at 724-746-5500 or [email protected].
• Shielded Category 6A Jack
• Stuffer cap
• Cable tie
• This instruction sheet
Terminating the CAT 6A Jack
1. Strip and prepare your CAT 6A shielded bulk cable. Peel back the shielding foil and
drain wire. Wrap it around the cable jacket.
2. Remove excess Mylar® wrapping around the twisted pairs.
3. Slide the stuffer cap over the stripped cable just until the stuffer cap touches the
beginning of the cable jacket.
To Continue with These Instructions, Turn This Page Over…
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
call 724-746-5500) • FREE technical support 24 hours a day, 7 days a
week: Call 724-746-5500 or fax 724-746-0746 Mailing address:
Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Customer
Support
Information
•
E-mail: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|