ECGK
Elite™ Cabinets Grounding Kit
Ensure safety and uptime with this grounding kit
that works with Elite Cabinets.
Each cable assembly:
NOTE: Additional grounding wires may be needed depending
on cabinet configuration. Recommended use is with a
grounding bar.
• (2) ring terminals
• (1) male quick-connect terminal
• (1) female quick-connect terminal
Grounding wire:
What's included
• (5) 24" quick-disconnect jumper wires
• (1) 48" quick-disconnect jumper wire (used in 48" deep
cabinets)
12 AWG, ground wire (green)
Wire legend:
• (12) M6 Keps® nuts
• (24) 10-32 Keps nuts
• (12) flat steel washers
CSA TEW 105°C 600V LL85687 12AWG FT1 -F- ROHS REACH
© Copyright 2013. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks, and Elite is a trademark, of BB
Technologies, Inc. Keps is a registered trademark of Illinois Tool Works, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective
owners.
ECGK, rev. 1
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Customer
Support
Information
Download from Www.Somanuals.com. All Manuals Search And Download.
|