Earn BISSELL Rewards!
Register your
product today!
See details on
back page
USER'S GUIDE
24A4, 30K7, 66E1, 80X9 SERIES
2
3
Thank You
Safety Instructions
Product View
Assembly
4-5
6
7-12
Operations
13-15
16
Maintenance and Care
Troubleshooting
Accessories
17
18
Replacement Parts
Warranty
19
20
20
Product Registration
Consumer Care
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions
should be observed, including the following:
■ Be extra careful when cleaning stairs.
■ Close attention is necessary when used by or near children.
Read all instRuctions befoRe using
youR deeP cleaneR.
SAVE THESE
INSTRUCTIONS.
this model is foR household use
only.
WARNING:
To reduce the risk of fire,
electric shock, or injury:
GROUNDING
■ Do not immerse.
■ Use only on surfaces moistened by the cleaning process.
■ Always connect to a properly grounded outlet.
■ See Grounding Instructions.
■ Unplug from outlet when not in use and before conducting
maintenance or troubleshooting.
■ Do not leave machine when it is plugged in.
■ Do not service machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, have it repaired at
an authorized Service Center.
INSTRUCTIONS
this appliance must be connected to
a grounded wiring system. if it should
malfunction or break down, grounding
provides a safe path of least resistance
for electrical current, reducing the risk of
electrical shock. the cord for this appli-
ance has an equipment-grounding con-
ductor and a grounding plug. it must only
be plugged into an outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
■ Do not expose to rain, store indoors.
■ Do not pull or carry by cord, use cord as a handle, close door on
cord, pull cord around sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
Grounded
Outlets
■ Unplug by grasping the plug, not the cord.
■ Do not handle plug or appliance with wet hands.
■ Do not put any object into appliance openings, use with blocked
opening, or restrict air flow.
Grounding Pin
■ Do not expose hair, loose clothing, fingers or body parts to
openings or moving parts.
■ Do not pick up hot or burning objects.
■ Do not pick up flammable or combustible materials (lighter fluid, gaso-
line, kerosene, etc.) or use in the presence of explosive liquids or vapor.
■ Do not use appliance in an enclosed space filled with vapors
given off by oil base paint, paint thinner, some moth proofing
substances, flammable dust, or other explosive or toxic vapors.
■ Do not pick up toxic material (chlorine bleach, ammonia, drain
cleaner, gasoline, etc.).
■ Do not modify the 3-prong grounded plug.
■ Do not allow to be used as a toy.
■ Do not use for any purpose other than described in this User’s Guide.
■ Do not unplug by pulling on the cord.
■ Use only manufacturer’s recommended attachments.
■ Use only cleaning products formulated by BISSELL for use in
this appliance to prevent internal component damage. See
the cleaning fluid section of this guide.
■ Keep openings free of dust, lint, hair, etc.
■ Do not point attachment nozzle at people or animals
■ Keep appliance on a level surface.
WARNING:
improper connection of the equipment-
grounding conductor can result in a risk
of electrical shock. check with a qualified
electrician or service person if you aren’t
sure if the outlet is properly grounded.
do not modify the Plug. if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician. this
appliance is designed for use on a nomi-
nal 120-volt circuit, and has a grounding
attachment plug that looks like the plug
in the drawing above. make certain that
the appliance is connected to an outlet
having the same configuration as the
plug. no plug adapter should be used
with this appliance.
■ Turn off all controls before unplugging.
■ Unplug before attaching the TurboBrush® Tool.
3
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Product view
Upper Handle
Carry Handle
Heat
Indicator Light
Specialty Tool
(tools vary by model)
Formula &
Water Tank
Power Button
Flex Hose
Power Cord
Quick Release™
Cord Wrap
Dirty Tank
Portable Spot
Cleaning Release
Pedal
EdgeSweep®
Brushes
Removeable
Nozzle
4
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Product view
Spray Trigger
Cord Clip
Tool Storage
Support Handle
Tool Storage
(some models)
Hose Secure
Latch
WARNING:
to reduce the risk of fire and
electric shock due to internal
component damage, use only
bissell cleaning fluids intended
for use with the deep cleaner.
Recline Pedal
Cleaning fluid
Keep plenty of genuine bissell 2X formula on hand so you can clean and protect whenever
it fits your schedule. always use genuine bissell deep cleaning formulas. non-bissell
cleaning solutions may harm the machine and will void the warranty.
Professional
Deep Cleaning
Deep Clean
& Protect
Pet Stain & Odor
Allergen Cleansing
Pet Stain PreTreat
Stain PreTreat
Removes tough pet Deep cleans carpets
Pretreat to
penetrate
and loosen
tough stains
Out cleans
all other
formulas
Pretreat to help
remove tough pet
stains and odors
stains and contains
patented odor
and protects from Helps remove pet &
Best for
future stains with
removal technology Scotchgard™ Protector
pollen allergens
2X Concentrated
X
X
X
X
X
X
X
®
Scotchgard™ Protection
5
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Your deep cleaner comes in two
easy to assemble components:
1.
2.
1. upper handle
2. Portable spot cleaner/base
The only tool you will need to
assemble your cleaner is a Phillips
screwdriver.
1. slide the upper handle onto the body
of the machine by guiding the 2 posts
on the body into the opening on the
upper handle.
1.
3.
2.
2. firmly holding the upper handle in
place, screw 2 screws into the marked
holes at an upward angle above the
support handle.
3. at an upward angle, screw the remaining
2 screws into the marked outermost holes
under the support handle.
4.
CORD
SIDE
HOSE
SIDE
4. Wrap power cord around Quick
Release cord Wrap.
5. Wrap flex hose around the hose wrap
and secure with hose secure latch.
5.
6. align the product as image 4 shows
and firmly push down the portable spot
cleaner until it is secured on both sides.
7. check latches on both sides to confirm
it is secured (5).
to further check if the portable spot
cleaner is secure, plug in and turn on
to verify that the heat indicator light is
illuminated. if the heat indicator light
does not illuminate, release the pod
and re-secure by pushing firmly until
both sides snap into place.
WARNING:
do not plug in your cleaner
until you have completely
assembled it per the above
instructions and are familiar
with all instructions and
8. snap attachment(s) into the back of unit.
NOTE: Portable spot cleaner must
be fully secure to operate in the
upright mode.
operating procedures.
6
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Special features
Innovative cleaning technology
this innovative deep cleaner offers two
machines in one. the upright deep cleaner
uses brushes and cleaning formula to
maximize cleaning. the portable spot
cleaner detaches to clean tough spots and
stains and hard to reach areas.
Heatwave Technology™
this deep cleaner features heatwave
technology to help maintain the temperature
of the hot tap water you put in it to provide
constant heat as you clean. Water in the clean
tank is heated by heat from the vacuum motor.
the heatwave technology automatically turns
on when you turn the machine on. heatwave
technology operates in both upright and
portable cleaning modes.
Pedal Graphic
Tip:
for easy carrying, grab the carry
handle on the portable spot cleaner
and balance with the handle on the
back of the machine.
Scotchgard™ Protector
carpet protection applied at the mill typically
wears down over time from heavy foot traffic
and everyday cleaning, including deep
cleaning. to help restore this important
protection, only bissell offers deep cleaning
formulas with scotchgard protector. this offers
extra protection against dirt and tough stains
to keep your carpets looking good longer.
to maintain your carpet's scotchgard 5-year
limited stain warranty, you do not need to hire
a professional. by using your bissell deep
cleaner with bissell 2X formulas containing
scotchgard protector every 12 months, your
carpet warranty from 3m remains in effect.
no other home deep cleaning system can do
this for you. Refer to the scotchgard Protector
warranty for details.
7
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Before you clean
1. move furniture to another area if cleaning
ATTENTION:
some berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition.
an entire room (optional).
2. for best results, vacuum area with a
dry vacuum cleaner thoroughly before
deep cleaning.
3. Pretreating (optional):
3a. Pretreating is recommended to
improve cleaning effectiveness
for heavily soiled carpet in high
traffic areas such as entryway
and hallways.
3b.
3b. BISSELL Stain PreTreat
spray the bissell stain Pretreat
formula onto heavy traffic areas,
soiled areas or stains.
allow to penetrate for at least 3 minutes.
clean as normal, using the deep
cleaner in upright mode, following
the instructions below.
1.
2.
Upright cleaning mode
Filling formula & water tank
1. Remove tank from the base of the machine
by lifting up tank carry handle.
NOTE: This tank was designed
with a flat bottom so it can be
easily filled.
2. unscrew the black cap and remove
bottle insert.
3. fill tank with hot tap water to the water
fill line. add two ounces of bissell 2X
formula to the tank.
4. Replace the bottle insert in the tank and
tighten the black cap. Replace the tank
on the deep cleaner.
Cleaning
1. Plug into a proper outlet and press the
power button.
2. While pressing the trigger, make one slow
forward wet pass and another one back.
8
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Upright cleaning mode continued
Cleaning continued
3. Release the trigger and make one slow
forward and backward pass over the
same area. Repeated passes will help
aid in dry time.
CAUTION:
do not overwet. take care not
to run over loose objects or
edges of area rugs. stalling
brush may result in premature
belt failure.
4. continue passes until cleaning area
is complete.
NOTE: Your machine may be
equipped with a circuit breaker that
will automatically shut off the brush
if a large or loose object is caught
in the brush roll. If that happens,
be sure to unplug your machine,
remove the foreign object and then
plug the machine back in to reset the
circuit breaker.
Tip:
make only one trip to the sink by
removing the entire portable cleaner.
fill and empty in the same trip.
Empty dirty tank
1. When the dirty tank reaches the “FULL”
line on the tank, it is time to empty.
3.
2.
2. Remove the dirty tank and carry it to
a utility sink, toilet or outside (where
you will dispose of the dirty water).
3. to unlock the dirty tank lid, rotate the
handle over the back of the tank. Remove
lid and pour out dirty water. Rinse out the
dirty tank to remove any debris.
4. Replace the top of the tank and rotate
the handle forward to lock in place on
front of tank.
5.
4.
5. before replacing the tank on the
machine, wipe debris from red filter
Cleaning your machine
1. flush out machine of any remaining
residual solution.
1a. fill the formula & water tank with
hot tap water and turn on your
machine.
WARNING:
to reduce the risk of fire, electric
shock, or injury, turn power
1b.Recline handle and press the spray
trigger for about 15 seconds while
making forward and backward
off and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
passes on carpet. continue without
pressing the trigger until there is no
more water being suctioned up.
1c. turn off the machine and wrap the
powercord. make sure the dirty tank
and the formula & water tank are
emptied, rinsed, and dried before
the next use.
Tip:
for best results, empty,
rinse, and dry both tanks
before storing.
1d. before you replace tank, clean
all debris from red filter screen.
9
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Upright cleaning mode continued
Cleaning your machine continued
2. Rinse the front nozzle of any dirt and
debris.
WARNING:
2a. Remove the portable spot cleaner
to reduce the risk of fire,
from the base of the machine.
electric shock or injury unplug
from outlet before servicing.
2b. unscrew three screws with Phillips
screw driver and remove nozzle.
2c. Rinse the nozzle out at the faucet.
2b.
2d. Place the nozzle back onto the
machine by hooking the tabs into
the holes on the bottom sides of the
machine. secure with screws.
3. the inside of the end caps can be
wiped out with a clean paper towel,
or, for a more thorough clean, the end
caps can be taken off and rinsed clean.
4. any loose hair or debris can be pulled
from the brush rolls and thrown away. for
a more thorough clean, follow directions
on page 15 for removal of brush rolls.
your machine is now ready to be stored.
Tip:
let all parts dry completely
and replace onto machine.
NOTE: Store cleaner in a protected,
dry area. Since this product uses
water, it must not be stored where
there is a danger of freezing.
Freezing will damage internal
components and void the warranty.
10
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Portable spot cleaning mode
Preparing the machine
1. step on the portable spot cleaning pedal
to release the portable spot cleaner.
2. Release flex hose by twisting the hose
secure latch clockwise. unwrap flex
hose completely.
3. attach the desired tool to the hose grip
until it snaps together. make certain the
tool is securely attached.
4. twist the Quick Release cord wrap clock-
wise to unwrap the power cord completely
and plug into grounded outlet.
Filling tank
1. follow the instructions for filling the tank
in the upright cleaning mode section on
page 8.
Cleaning with Tools:
ImPORTANT! If using to clean uphol-
stery, check upholstery tags. Check
manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you
can use your Lift off Deep Cleaner if
the tag is coded with an “X” or an
“S”(with a diagonal stripe through it),
or says “Dry Clean Only”, do not pro-
ceed with any deep cleaning machine.
Do not use on velvet or silk. If manu-
facturer’s tag is missing or not coded,
check with your furniture dealer.”)
NOTE: If your deep cleaner came
with a Deep Reach Tool, do not follow
cleaning instructions below. Instead,
follow instructions in next section.
1. hold the tool approximately 1" above
the soiled surface. Press the spray
trigger to apply the cleaning solution
to the soiled area.
Manufacturer’s tag
Check for colorfastness in an
NOTE: Hold end of hose below the
tank water level to help prime the
portable spot cleaner.
inconspicuous place. If possible,
check upholstery stuffing. Colored
stuffing may bleed through fabric.
2. using the brush on the tool, gently scrub
the area to be cleaned.
3. apply downward pressure on the tool and
pull it toward you. the suction will remove
the dirt and cleaning solution. continue until
no more dirt can be removed.
11
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Portable spot cleaning mode continued
Cleaning with Deep Reach™ Tool
1. set tool on soiled surfaces and press the
trigger to spray solution onto the soiled
area to be cleaned.
1.
2. slowly move the tool back and forth
over the soiled surface, keeping the tool
in contact with the carpet.
3.
Release trigger and move tool slowly
over the soiled area to suction up
water and dirt.
4. continue to clean the area, working
in small sections, until no more dirt
can be removed.
Empty dirty tank
follow the instructions under empty dirty
tank section on page 9 of the upright
cleaning mode section.
1.
Replacing portable machine on base
CORD
SIDE
HOSE
SIDE
1. align the product with the cord side on
the left and hose side on the right.
2. Push down the portable spot cleaner
until both sides click securely into place.
test the fit by pulling up on the carry
handle to make sure it is secure. to
further check if the portable spot cleaner
is secure, plug in and turn on to verify
that the heat indicator light is illuminat-
ed. if the heat indicator light does not
illuminate, release the pod and re-secure
by pushing firmly until both sides snap
into place.
Cleaning portable machine
1. Remove and rinse the tools in clean,
running water. dry and replace in the
tool storage provided.
2. it is recommended that you suction clean
water from a bowl to rinse out the hose.
then lift end of hose and stretch out to
ensure all water is cleared from hose.
3. coil flex hose around the hose wrap
and secure with latch.
4. check suction gate and if it appears
dirty, follow steps 1-4 under cleaning
suction gate on page 13.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
machine care (check regularly)
WARNING:
Cleaning suction gate
to reduce the risk of fire,
electric shock, or injury, turn
power off and disconnect
plug from electrical outlet
before performing maintenance
or troubleshooting.
the suction gate automatically diverts air
when the portable deep cleaner is detached.
this should be checked and cleaned
regularly for any dirt and debris.
1. step on the pedal and remove
the portable spot cleaner. Remove
dirty tank.
2.
2. Remove two screws and pull off
suction gate door.
3. Wipe suction gate clean and rinse
suction gate door.
4. Replace suction gate door and
Suction
Gate
two screws.
Cleaning spray tips
1. step on the pedal and remove the
portable spot cleaner. to remove each
spray tip, push tab in and pull it out.
Spray
Tips
2. clean by rinsing under hot water.
3. Replace by snapping back in.
1.
13
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Small belt removal and replacement (as needed)
occasional replacement of one or both belts
may become necessary. if that is needed,
WARNING:
please follow the instructions below.
to reduce the risk of fire,
1. turn off the machine and unplug it from
electric shock or injury, unplug
from the outlet before servicing.
the outlet. Remove portable spot cleaner.
2. Remove the nozzle by unscrewing three
screws on the nozzle cover.
2.
4.
3. turn the machine on its side.
ImPORTANT: with portable spot
cleaning pedal facing down.
4. Remove end cap by unscrewing the
3 screws. take care not to drop the
screws into the unit.
5.
5. Remove 1 silver screw from the
pivot arm.
6. Remove pivot arm by gently lifting up.
7. Remove small brush belt.
8. Replace small brush belt, and reverse
steps above.
9. manually rotate brushes by hand to
make sure they move freely. you may
notice a slight resistance from the motor.
6.
8.
7.
14
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Brush removal and large belt replacement (as needed)
brushes can be removed for cleaning or
replacement as needed.
WARNING:
1. follow small belt removal instructions on
to reduce the risk of fire,
page 14 items 1-7.
electric shock or injury, unplug
from the outlet before servicing.
2. Remove brush rolls by pulling them off
of the metal rods. Be careful not to
lose the small washer at each
end of the brush rolls.
2.
4.
3.
3. Re-attach the large belt to the grooves
on the end of the new brush rolls. if
the belt is damaged, replace with a
new belt.
4. Place cleaned or new brush rolls back
onto the rods. make sure one washer is
on each end of the rollers prior to sliding
onto the rod. be sure the brush is seated
completely on the rod.
5.
5. Replace small belt over grooves in
back roller and metal cog.
6. Replace pivot arm and secure with
silver screw.
7. Re-attach end cap by tightening with
the (3) black screws.
6.
8.
7.
8. Return front nozzle to front of unit, by
latching from underneath and then
securing with 3 screws.
9. follow step number 8 & 9 on page 14.
if you have any questions or are having
trouble installing or replacing your
belt(s) or brushes, please call
BISSELL Consumer Care.
15
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
WARNING:
to reduce the risk of fire,
electric shock or injury, unplug
from the outlet before servicing.
Heater indicator light
does not illuminate
Possible causes
Remedies
1. The power is not turned ON
1. The power must be ON to activate the heater indicator light
2. The portable spot cleaner is not attached completely
2. Make sure the portable spot cleaner is attached
Push down firmly to check (see pages 6 or 12 for
detailed instructions)
Reduced Spray or No Spray
Possible causes
Remedies
1. Formula & water tank may be empty
1. Refill tank
2. Formula & water tank may not be seated completely
3. Pump may have lost prime in portable spot cleaning mode
4. The portable spot cleaner is not attached completely
2. Turn power OFF. Remove and reseat tank
3. Hold end of hose below water level in tank to prime
4. Push down firmly to check connection
®
DirtLifter PowerBrush does not turn
Possible causes
Remedies
1. The portable spot cleaner is not attached completely
1. Make sure the portable spot cleaner is attached.
Push down firmly to check (see pages 6 or 12 for
detailed instructions)
2. The unit is in the upright position
2. Brushes only rotate when unit is reclined using the
recline pedal
3.
3. Turn the machine OFF and unplug from outlet. Check
to see if foreign object is caught in brush roll. Remove
object. Plug machine in to reset circuit breaker
Circuit breaker on machine (if equipped) may have tripped
4. The belt is off or broken
4. Turn power OFF and unplug unit from outlet. Follow
instructions on pages 14 and 15
Loss of suction power
Possible causes
Remedies
1. Tanks may not be seated properly
1. Pick up both tanks and reseat them so it they fit snugly
on the unit
2. Nozzles may not be assembled properly
2. Unplug the unit. Check to make sure the "lip" of the
nozzle cover is securely hooked into the groove on the
top of nozzle (see page 10)
3. The portable spot cleaner is not attached completely
3. Make sure the portable spot cleaner is attached.
Push down firmly to check (see pages 6 or 12 for
detailed instructions)
4. Dirty tank has picked up maximum amount of
dirty water and has reached full line
4. Empty dirty tank
5. Formula & water tank is empty
6. Suction Gate is open.
5. Check fluid levels in formula & water tank
6. Check to make sure the suction gate is closed. Follow
“Cleaning Suction Gate” instructions on page 13.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
16
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories - BISSELL deep cleaner
These items are available for purchase as accessories for your BISSELL deep
Item Part No. Part Name
1
2
3
4
5
203-6651
203-6652
203-6653
203-6654
203-7885
3” tough stain tool
Powered turbobrush® hand tool
4” upholstery tool
6” stair tool
spraying crevice tool
6
203-7412
deep Reach Pet tool
7
8
9
10
11
62e5-2
2X deep clean & Protect formula with scotchgard™ Protection 60 oz.
99K5-2
89Q5-2
78h6-3
0790
2X Pet stain and odor formula with scotchgard™ Protection 60 oz.
2X allergen cleansing formula 60 oz.
2X Professional deep cleaning formula with scotchgard™ Protection 48 oz.
Pet stain Pretreat 22 oz.
12
13
4001
210-3040
stain Pretreat 22 oz.
mesh bag
*not all parts are included with every model.
1
2
3
4
9
5
6
7
8
10
11
12
13
17
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement parts – BISSELL deep cleaner
Below please find a list of common replacement parts. While not all of these
parts may have come with your specific machine, all are available to you for
purchase, if desired.
Item Part No. Part Name
1
160-0813
203-6675
203-7894
203-7904
203-7896
203-7897
203-7906
203-7907
203-6686
203-6688
203-6804
203-6689
203-7918
203-7917
formula & Water tank assembly (includes cap and insert)
cap and insert for formula & Water tank
collection tank bottom
2
3
4
5
6
7
8
9
10
11
12
13
14
cord Wrap
end caps with edge brushes (2 pack, includes screws)
spray tips assembly (includes two spray tips)
nozzle cover top w/gasket
nozzle cover lower and front w/gasket
brush single Pack (includes 1 brush roll, and 1 axle)
small brush belt
large brush belt
hose secure latch
dirty tank gasket assembly (include both gaskets)
diverter cover assembly (includes cover and screws)
*not all parts are included with every model.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
18
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty – BISSELL Deep Cleaner
this warranty gives you specific legal rights, and you may also have other rights which may vary
from state to state. if you need additional instruction regarding this warranty or have questions
regarding what it may cover, please contact bissell consumer care by e-mail, telephone, or
regular mail as described below.
Limited Three-Year Warranty
subject to the *eXcePtions and eXclusions identified below, upon receipt of the
product bissell will repair or replace (with new or remanufactured components or products),
at bissell’s option, free of charge from the date of purchase by the original purchaser, for
three years any defective or malfunctioning part.
see information below on "if your bissell product should require service".
this warranty applies to product used for personal, and not commercial or rental service. this
warranty does not apply to fans or routine maintenance components such as filters, belts, or
brushes. damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or
any other use not in accordance with the user's guide is not covered.
If your BISSELL product should require service:
contact bissell consumer care to locate a bissell authorized service center in your area.
if you need information about repairs or replacement parts, or if you have questions about
your warranty, contact bissell consumer care.
Website or E-mail:
Or Call:
bissell consumer care
1-800-237-7691
monday – friday 8 am - 10 pm et
saturday 9 am - 8 pm et
sunday 10am - 7pm et
Or Write:
bissell homecare, inc.
Po box 3606
grand Rapids, mi 49501
attn: consumer care
bissell is not liable foR incidental oR conseQuential damages of any natuRe
associated With the use of this PRoduct. bissell’s liability Will not eXceed the
PuRchase PRice of the PRoduct.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROm THE TERmS OF THE LImITED WARRANTY
this WaRRanty is eXclusiVe and in lieu of any otheR WaRRanties eitheR oRal oR
WRitten. any imPlied WaRRanties Which may aRise by oPeRation of laW, including
the imPlied WaRRanties of meRchantability and fitness foR a PaRticulaR PuRPose, aRe
limited to the thRee yeaR duRation fRom the date of PuRchase as descRibed aboVe.
some states do not allow limitations on how long an implied warranty last so the above limitation
may not apply to you.
19
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Don't forget to register your product!
Registering is quick, easy and offers you benefits over the lifetime of your product.
you’ll receive:
BISSELL Rewards Points
automatically earn points for discounts and free shipping on future purchases.
Faster Service
supplying your information now saves you time should you need to contact us with
questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions
optional: Register your email to receive notice of offers, contests, cleaning tips and more!
Visit www.bissell.com/registration now!
BISSELL Consumer Care
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Care
1-800-237-7691
Monday – Friday 8 am - 10 pm ET
Saturday
9 am - 8 pm ET
10 am - 7 pm ET
Sunday
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Care
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It
provides proof of purchase date in the event of a
warranty claim. See Warranty on page 19 for details.
©2013 bissell homecare, inc
grand Rapids, michigan
all rights reserved. Printed in china
Part number 160-3183
Rev 10/13
Visit our website at:
scotchgard is a trademark of 3m
20
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|