Belkin Network Router F5L049 User Manual

Home Base

User Manual

8820-00256 F5L049

Download from Www.Somanuals.com. All Manuals Search And Download.

InTroDUCTIon

table of contents

sections

Thank you for purchasing the Belkin Home Base. By following these simple setup instructions, your Belkin Home Base will allow you

to share your USB printer and hard drives, with any computer or laptop on your home network. The Control Center software offers a

convenient central location to configure the Home Base and the USB devices you attach to it.

Home Base Capabilities

•

Share and control printers and scanners among all

the networked computers in your home

Share external drives with all the networked computers

in your home

Back up critical and precious content from all your networked

computers to an external drive for safekeeping

Schedule automatic backups to regularly archive new content

and changes

•

Automatically share pictures on Flickr^®and Picasa^®

Set up an external drive to act as a DLNA server for

your media content

(a) (B) (C) (D)

(a) Wireless security – Indicates wireless security is enabled when lit

•

Media files served through Home Base’s drive can be

accessed directly from Xbox 360™, PlayStation^®3, and

other DLNA client devices

(B) WPs Connect Button – Automatically establishes secure wireless

connection to routers with similar WPS connect button feature

(D) Power – On/Off

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

InTroDUCTIon

table of contents

sections

Package Contents

Benefits of Home Base

•

Belkin Home Base

Quick Installation Guide

•

Share – Easily pass files back and forth across the network. Share

music, photos, video, documents, or any content you want by

placing it on the external drive attached to Home Base.

Belkin Setup Assistant Software CD

RJ45 Ethernet Networking Cable

Power Supply

Peace of Mind – All your critical content can be backed up to the

drive(s) attached to Home Base. All your family photos and critical

documents will be safe from computer crashes.

User Manual on the Setup Assistant CD

Mobility – Print and scan from anywhere in the home. You are no

longer tethered to the computer, nor do you need to email print

jobs to a computer physically connected to the printer.

Freedom – Hide your printers, scanners, and external drives

out of sight.

system requirements

•

Windows^®, XP, or Vista^®32- or 64-bit

Mac OS^®X v10.4 or v10.5

•

Minimum 1GHz processor and 128MB RAM

Flexibility – Any USB peripheral can be shared among all your

networked computers simply by attaching it to Home Base.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

GeTTInG sTarTeD

table of contents

sections

Connect Home Base to your network

First, connect Home Base to

your router with a network

cable. Next, plug the included

power supply into Home Base

and into a power outlet.

If you’d like to use Home Base wire-

lessly, plug it into your router for now.

The setup software will help you

make Home Base operate on your

wireless network. You can

also use WPS to wirelessly set up

Home Base. See the help ﬁle on the

CD for details.

Run the setup software

Setup CD

Run the setup software to make Home Base a member of your network.

Insert the CD, and the setup software will run*. Choose “Set Up Home

Base”. If you don’t already have it installed, the setup software will also

install Control Center on your machine.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

GeTTInG sTarTeD

table of contents

sections

Install Control Center on other computers

You will need to install Control Center on each additional

computer that will use Home Base. Insert the CD and the

setup software will run*. Choose “Install Control Center”.

*If the setup software does

not run automatically, browse

the CD and run “Setup”.

Connect USB devices

You can manage these devices via the Control

Center, the icon of which appears in your system

tray (Windows^®) or menu bar (Mac OS^®X). It is

also accessible via the Start menu (Windows) or

Applications folder (Mac OS X).

Once Home Base is a member of your network, you’re

ready to plug in printers, hard drives, and other USB

devices to share among your computers. Simply plug each

device into an open USB port on the back of Home Base.

Note: If you plug a printer into Home Base, each

computer will ask you to install the printer’s driver if it

hasn’t been done already. You’ll only have to do this once.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

WIreless seTUP

table of contents

sections

There are three ways to attach your Home Base to your

wireless network:

Wired setup of Wireless Mode

note: If Home Base is powered on while plugged into a router, it

will operate as a wired device. To enable Wireless mode, follow

instructions below.

•

Wired Setup of Wireless Mode

WPS Push Button Configuration

WPS PIN Configuration

The setup software will help you make Home Base operate as a member

of your wireless network.

Start by connecting your Home Base to your router.

(You’ll unplug it later.)

Connect the AC adapter.

Run the setup software and follow the software’s instructions

to set up the Home Base.

When offered wireless setup, select a wireless network.

The setup software will tell Home Base what network you chose.

Follow the software’s instructions to unplug your Home Base from

the router and turn it off and on.

Your Home Base will then operate as a member of your

wireless network.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

WIreless seTUP

table of contents

sections

WPs Push Button Configuration

If your router supports WPS, the WPS Push Button Configuration (PBC) is the quickest way to get Home Base onto your

wireless network.

Make sure Home Base is NOT plugged into your router.

Connect the AC adapter.

status of WPs Wireless security:

off

Wireless security is off

Push the WPS button on your router. (Refer to your router’s

instruction manual.)

Blinking Blue

solid Blue

WPS handshaking in process

Wireless security is on

Push and hold the WPS button on Home Base. Release the WPS

button when the blue security LED on the Home Base and the LED

start blinking. Once the LED starts blinking in longer intervals for

approximately three seconds, release the button.

If a connection is established, Home Base’s security LED will come on

in solid blue.

If a connection is not established after more than two minutes, the

security LED will flash quickly and continuously for 10 seconds, then

stop, and you’ll need to try again.

Home Base and your router will negotiate a connection.

If Home Base couldn’t determine to which router to connect, the

security LED will flash in bursts of five for 10 seconds, then stop, and

you’ll need to try again.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

WIreless seTUP

table of contents

sections

WPs PIn Configuration

If your router does not support the WPS Push Button Configuration, the alternative is to apply the WPS security using the PIN

Configuration. Locate the 8-digit PIN code on the bottom of Home Base and enter this pin into your router to manually initiate a

WPS connection.

Read the PIN code from the bottom of Home Base.

Make sure Home Base is NOT plugged into your router.

Connect the AC adapter.

If a connection is established, Home Base’s security LED will come on

in solid blue.

If a connection is not established after more than two minutes, the

security LED will flash quickly and continuously for 10 seconds, then

stop, and you’ll need to try again.

Push and hold the WPS button on Home Base. Release the WPS

button when the security LED on Home Base starts blinking short

blinks after about 10 seconds.

For more information on wireless setup, see the “Troubleshooting” and

“FAQs” sections in this manual.

Enter the PIN code into your router’s interface. (Refer to your

router’s instruction manual.)

Home Base and your router will negotiate a connection.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

aVaIlaBle DeVICes lIsT

table of contents

sections

The “Available Devices” tab displays a list of USB devices connected to Home Base and allows you to select devices and specify

connection settings for them. For more information, see the “Device Properties” section below.

The “Available Devices” tab displays a list of USB devices connected

to Home Base and allows you to select devices and specify connection

settings for them. For more information, see the “Device Properties”

section on the next page.

To connect to a USB device, select it and click “Connect”. alternatively,

you can double-click on a device to connect to it. If you double-click

on a disk drive, you can access the contents of the disk drive.

By default, disks attached to Home Base are shared with all computers

on the network. A disk can be unmounted safely by selecting it and

clicking “Disconnect”. A disk that is not mounted can be mounted again

by unplugging and plugging its USB cable back into Home Base.

If someone is using a device you’d like to use, select the device and

click “Request Use”. A message will appear on the user’s computer

notifying him or her that you wish to use this device. They can elect to

make the device available to you, or not.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

DeVICe ProPerTIes

table of contents

sections

To access the properties sheet for an individual device, select the device in Control Center and click “Properties”. The properties

sheet allows you to specify general settings such as the name that the device will appear as in the Control Center, whether the

device should automatically connect with a computer via the Home Base as soon as the computer starts, and more.

The “General” tab of the “Device Properties” screen enables you to

change the name the device appears as in the Control Center and

displays various reference information about the device.

General Properties

In the “Display Name” field, enter the name of the device as you want

it to appear in the Control Center. The default name is gathered by the

Control Center from the device itself. This default name will always

appear as the USB device name, even if you change the “Display

Name”.

“Device speed” is shown as reported by the particular device. Actual

performance is also affected by other factors such as your network

configuration.

Hi-speed: USB products that carry the “Hi-Speed USB” logo and

support a speed of 480Mbps.

full speed: USB products that carry the basic “Certified USB” logo

and support a speed of up to 12Mbps.

low speed: Supports up to 1.5Mbps.

The “General” tab also contains reference information about the device.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

DeVICe ProPerTIes

table of contents

sections

The “Connection” tab of the “Device Properties” screen enables you

to specify if the device should connect automatically to this computer

when the computer is started, and if any software should start

automatically when the device connects. The information in this topic

applies to all devices except printers and disks that are shared via NAS

mode. To learn about connection properties for printers, see the “Printer

Connection Properties” section.

Device Connection Properties

Check the “Automatically connect this device when the Home Base

Control Center starts” check box if you want to this computer to

automatically connect to this device each time Control Center starts. If

you mark this check box along with the box that specifies if the Control

Center should start, the device will automatically connect each time you

start the computer.

Connections to devices may occasionally be lost due to network

failures or other factors. If you want the Control Center to automatically

reconnect with the device should this occur, check “Attempt to

reconnect the device if the connection is lost”. The Control Center will

try to reconnect with the device until the connection is reestablished or

the computer is shut down.

Use the “Launch Program” field to specify settings for any software

associated with this device. For example, a webcam probably has

software that captures video. By checking “Launch a program when this

device connects”, you can specify that the software starts automatically

when the webcam is available. You can also check “Disconnect device

when the program is closed” if you want to free up the device for use by

other computers when you close the software.

In the “Program” field, browse to find the software you want to associate

with the device. You can also enter the path to the program directly into

the field. Once your settings are saved, only the name of the program

appears in the “Program” field.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

DeVICe ProPerTIes

table of contents

sections

If the printer is being shared among multiple computers, we recommend

selecting “This is a shared printer, automatically connect and disconnect

only when printing”. With this option, the printer is automatically

Printer Connection Properties

connected when a print job is sent to it, then is disconnected as soon as

the job completes so the printer is then available for other computers.

Check “Automatically connect this device when the Home Base Control

Center starts” if you want this computer to automatically connect to

this printer each time the computer starts, preventing other users from

connecting to the printer automatically.

You can force users to manually connect to the printer with the “Never

automatically connect, I will always connect manually” option.

The “Printer” field is enabled if you select one of the automatic

connection options. From the drop-down list, select the printer driver

associated with this printer.

Connections to devices may occasionally be lost due to network

failures or other factors. If you want the Control Center to automatically

reconnect with the device should this occur, check “Attempt to

reconnect the device if a connection is lost”. The Control Center will try

to reconnect with the device until the connection is reestablished or the

computer is shut down.

Use the “Program” field to specify settings for any software associated

with this printer. You can also check “Disconnect this device when the

program is closed” if you want to free up the device for use by other

computers when you close the software.

In the “Program” field, browse to find the software you want to associate

with the printer. You can also enter the path to the software directly into

the field. Once your settings are saved, only the name of the program

appears in the “Program” field.

When a printer is selected, the “Connection” tab of the “Device

Properties” screen offers additional functionality specific to printers.

In particular, you can select one of three options for automatically

connecting the device.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

loCal BaCKUP

table of contents

sections

The Belkin Home Base Control Center Local Backup tab enables you to easily back up the files from your computer to USB drives

connected to Home Base.

To set up a backup from your computer, select the volume to which you

want to back up and click “Choose Disk”.

If you want to change the disk volume used for backup, click

“Change Disk”.

Your backup will begin when indicated by “Next Backup”, or you can

start backing up immediately by clicking “Backup Now”. The status of

your backup will be shown via a progress bar. The first backup can take

a while as it copies all of the files on your computer. Once the initial

backup is complete, the Control Center will monitor your computer and

only back up new and changed files.

The backup job screen will appear. The name of the disk, and its free

space, will be shown, as well as the date and time of the next backup.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

loCal BaCKUP

table of contents

sections

Click “Options” to exclude files from the backup. This can help your

backup happen faster. You can choose to exclude “Log files and

caches”, “Operating system files”, and “Applications”, and elect to

exclude one or more “Specific folders”. To exclude specific folders, click

“Set Folders” and choose which ones you don’t need to back up.

To restore files back to your computer, you can right-click on a file or

folder you wish to restore and choose “History” to bring up the history

browser, which will list all versions of the file/folder existing in the backup.

Select an item from the list and click the “Restore” button, which will allow

you to choose a restore destination. You may also drag an item from the

history browser to a location of your choice. You can also browse to the

“Local Backup” folder on the backup disk to find a version of the file.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

loCal BaCKUP

table of contents

sections

If you want to perform a full restore of your computer, launch the

“Restore Utility” found in the “Local Backup” folder of the drive that

received the backup.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTUre sHarInG

table of contents

sections

The “Picture Sharing” tab enables you to automatically upload pictures from USB disks connected to the Home Base to

picture-sharing sites like Flickr and Picasa.

If you want to change the time that Home Base performs the picture

uploads to the online services, click “Options”.

To enable this feature, click “Add a share” and select a folder from the

disk(s) connected to the Home Base. Home Base will monitor this folder

for pictures.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTUre sHarInG

table of contents

sections

Now select the photo-sharing site you want to use and follow the

prompts. If you don’t have a Flickr or Picasa account, you will need to

The “Picture Sharing” configuration wizard will ask you for your online

photo-sharing account information; you will need to authorize your

Home Base product so it can access your account and automatically

upload your pictures. The wizard will also ask you how often you want to

check for pictures to upload them.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTUre sHarInG

table of contents

sections

flickr account selection

A Flickr account is selected here. Next to “User Name”, the user names

stored in Home Base are displayed in a combo box.

If a new user name is entered, Flickr tool authorization is necessary. In

this case, clicking “Next” will bring up the following message.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTUre sHarInG

table of contents

sections

If “OK” is clicked, the default web browser will launch and the Flickr

authorization page will be displayed. Control Center will display a

message telling the user to dismiss it when authorization is complete.

After authorization is complete, the user clicks the message box’s “OK”

button. The new user account information is stored to Home Base and

the wizard continues.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTUre sHarInG

table of contents

sections

flickr optional settings

Begin Upload

Optional settings are configured here.

After adding a picture job, the user will choose whether to perform the

upload immediately, or wait until the configured time. When “Finish” is

clicked, the upload will be performed according to the user’s selection.

If an upload time was not already configured for Home Base, it can be

configured before clicking “Finish” (see bottom right image). If a time is

configured for one folder, it will be used for all other folders as well.

Item

Description

Sets tag information. Up to 64

tags can be entered, with each

tag separated by a space.

Tags

Anyone (Public)

All users can view the pictures.

Friends can also view the

pictures.

And Your

Friends

Only You (Private)

And Your

Family

Family members can also view

the pictures.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTUre sHarInG

table of contents

sections

If “Sign up for Web Albums” is clicked, the sign-up page for Picasa

Web Albums will open in a web browser. The user can create a Google

Account there if he or she does not already have one.

Picasa account selection

A Picasa account is selected here. Next to “User Name”, the user names

stored in Home Base are displayed in a combo box. If a new user name

is entered, Home Base will automatically store the account information.

A login error will be displayed if user authentication failed. If the

user forgot his or her password, he or she can click the “Forget your

Password?” link to open the Google Account password confirmation

page in a web browser.

If user authentication fails several times, the user may have to enter a

CAPTCHA (see bottom right image).

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTUre sHarInG

table of contents

sections

album Configuration

Begin Upload

The album to upload pictures is selected here. An existing album can

be selected, or a new album can be created. If there are no albums for

the Picasa account, a new album must be created, and “Select album”

cannot be chosen.

After adding a picture folder, the user will choose whether to perform the

upload immediately, or wait until the configured time. When “Finish” is

clicked, the upload will be performed according to the user’s selection.

If an upload time was not already configured for Home Base, it can be

configured before clicking “Finish” (see bottom right image). If a time is

configured for one folder, it will be used for all other folders as well.

Item

Description

Choose album to upload

pictures to.

Select Album

Create new Album

Title of the new album.

Album Title

Public

Allow all users to view the

pictures in this album.

Allow only users with authority

to view the pictures.

Private

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTUre sHarInG

table of contents

sections

In the folder list, an

error status message

will be displayed for

items where an error

occurred. When the

message is clicked,

the Error Information

Dialog will pop up.

error notification

If an error occurs while Picture Sharing is in progress, the user will be

notified via an icon (or balloon help) in the task tray on Windows, or an

icon on the system status bar on Mac OS X.

The Error Information

Dialog displays

detailed information

about the error. Also,

the user can configure

whether he or she

When the icon is clicked, the Picture Sharing screen in Control Center

will open.

wants newer pictures

uploaded first, or older

pictures uploaded first.

If “View Error Log” is

clicked, a log of errors

for the selected folder

will be displayed.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTUre sHarInG

table of contents

sections

Once you have configured Home Base to upload pictures to a photo-sharing

site, a list of folders and their associated sites will be shown on the “Picture

Sharing” tab. Each list item will show its status and the time of last upload. If

you want to share additional folders, click “Add a share”.

If you want to change the time that Home Base performs the picture uploads

to the online services, click “Options”.

To disable a share, uncheck its check box. To delete a sharing job

permanently, click “Remove”.

To access your pictures, log in to your account at www.flickr.com or

www.picasa.com to view your pictures online.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

ConTrol CenTer oPTIons

table of contents

sections

You can specify general settings such as whether you want the Control Center software to start when you start your computer, how

you want to update Control Center software, and more.

To access “Control Center Settings” properties, click “Tools > General” or “Tools > Connected Home Bases” in Control Center.

General settings

On the “General” tab, you can specify when you want Control Center

to start and the types of notifications you want to see.

If you check “Start Home Base Control Center when Windows Starts”,

any devices to which you choose to automatically connect will be ready

for use when you start your computer. For more information, see the

“Device Properties” section.

The “Show the Home Base Control Center” check box makes Control

Center appear each time you start the computer.

Under “Notification” you can specify which notifications you want to

see. Mark check boxes to:

notify me when the device connection is lost – to inform you when

the connection to a USB device is lost. This is enabled by default.

remind me that devices should not be in use whenever I

disconnect a device – to remind you that you should ensure

a device is not in use before disconnecting. For example,

disconnecting a storage device while files are open could result in

data loss. This is disabled by default.

You may also specify how often you want the device list to be refreshed.

This rate determines how often Control Center updates the status of

attached devices.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

ConTrol CenTer oPTIons

table of contents

sections

Connected Home Bases

On the “Connected Home Bases” tab you can view all Home Bases

available on your network and set properties for them.

Network administrators who are administering a network containing

subnetworks can click “Refresh options” to specify broadcast IP

addresses to be used when the Control Center searches the network for

Home Base.

All connected Home Bases are listed in the box. Select one and click

“Properties” to view its settings. This will open the web browser

configuration of Home Base. It consists of status, configuration,

maintenance, and help pages.

For more information on Home Base web browser interface, you can

click on “Help” on any of the web pages.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

MeDIa serVer

table of contents

sections

In addition, the following files may be showed on file lists that the media

player displays:

overview

Home Base can distribute pictures, movies, and music (called media

files) to UPnP media players by using UPnP.

Table 1 file formats

Media Type

Image

File Extension

.bmp .ico .gih .jpe .pnm .ppm .qti .qtf .qtif .tif .tiff

function features

Movie

asf .avc .avi .dv .divx .wmv .mjpg .mjpeg .mpe .mp2p .vob .mp2t .m1v .m2v

.mpg2 .mpeg2 .mp4ps .ts .ogm .mkv .rmvb .mov .hdmov .qt .bin .iso .asx

This Media Server distributes media files in USB storage to media

players. It makes virtual directories, “Image,” “Music,” and “Movie.”

These virtual directories consist of sub-directories and each kind of

media file.

Music

3gp .aac .aif .aiff .at3p .au .snd .dts .rmi .mid .mp1 .mp2 .ogg .pcm

.lpcm .l16 .wma .mka .ra .rm .ram .flac .pls .m3u

supported Media Players

supported Media formats

•

Sony^®PlayStation^®

This Media Server supports the following file types:

Microsoft® Xbox 360™

Media Type Format (File Extension)

Image

Movie

Music

JPEG (.jpg) PNG (.png)

about

MPEG-1 (.mpg) MPEG-2 (.mpg .mpeg) MPEG-4 (.m4v .m4p .mp4)

AC3 (.ac3) LPCM (.wav) MP3 (.mp3) MPEG-4 (.m4a) WMA (.wma)

The “About” tab shows which version of Control Center you are running

and software support contact information. Should you need to send an

email support request, please include the software version number in

your description.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

UPGraDInG HoMe Base fIrMWare

table of contents

sections

firmware Update Instructions

From the Home Base Control Center software, click on “Tools”,

then “Connected Home Bases”.

Choose your Home Base from the list (check the MAC address on the

label of the bottom of Home Base with the MAC address in the list) and

select “Properties”.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

UPGraDInG HoMe Base fIrMWare

table of contents

sections

Your web browser should open to the Home Base configuration page.

Click on “Upgrade Firmware”.

Type in your Home Base password (there is no password by default),

and click “Login”.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

UPGraDInG HoMe Base fIrMWare

table of contents

sections

Browse to the firmware file you downloaded from the Belkin website and

click “Open”.

Click “Upload”.

Click “OK” when the verification screen comes up.

Your firmware upgrade will take a few

minutes to complete after confirmation.

The firmware should now be upgraded.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

TroUBlesHooTInG

table of contents

sections

Is the network cable connected properly? The network (LAN)

cable may be unplugged or have bad contacts. Verify the cable

connections.

General Troubleshooting

If you are having issues, be sure to try these general tips first:

Is your computer on the network? If your computer is networked,

try to see if you can connect to other network computers or if

you can browse the Internet. Verify that the network is working

properly.

Make sure the Home Base Control Center Software is the latest

version, and the Home Base Firmware is the latest version.

Software and Firmware updates are available on Belkin’s website at

http://www.belkin.com.

Control Center can’t find a Home Base

Disks not appearing in Windows Explorer or Mac OS X Finder,

other devices not appearing in Control Center

Is the product turned on? The AC adapter may be unplugged.

Check that the Power LED is lit.

Is the USB cable connected properly? The USB cable may be

unplugged or have bad contacts. Verify the cable connections.

Is the Link LED lit? If the Link LED is not turned on, it may not be

connected properly. Try rerunning the Home Base Setup Wizard

and configuring the wireless settings again (or try another network

cable if you are using a wired connection).

Is the USB disk-drive format supported? Home Base supports

FAT16-, FAT32-, and NTFS-formatted disk drives only. If you have

a disk you want to connect that has a different file format, you can

still connect to it in Network USB Mode, or you can reformat the

disk to FAT32 or NTFS and use it in Network Storage Mode.

Make sure your computer’s wireless adapter and/or access point

is configured properly and note the configuration settings, paying

special attention to the wireless mode, SSID or network name, and

WEP/WPA/WPA2 security, so you can configure your Home Base

product to the same wireless settings.

note: Refer to the FAQ page of this manual for more information.

Make sure you have a good wireless signal from the wireless

access point or router to your computer and to Home Base, that

Home Base is within range, and that it is away from metal objects

and devices that generate radio interference (like Bluetooth^®

devices, cordless phones, and microwave ovens).

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

TroUBlesHooTInG

table of contents

sections

Unable to select a disk for backup

Device Troubleshooting

If a device is visible in Control Center, but you cannot connect to it, your

firewall may be blocking the connection. During installation, Control

Center configures the Windows firewall to enable Home Base to operate

properly. But if you are running a third-party firewall, you may need to

specify settings to open a port and enable operation of the Home Base

and Control Center. For information on how to do this with several types

of popular firewalls, see the “Firewalls” section.

The backup function of Home Base supports FAT16-, FAT32-, and

NTFS-formatted disk drives only.

Detection problems on machine with multiple active network interfaces

When multiple network interfaces are on a computer, sometimes

Windows operating systems have issues with discovery over the

network properly. In this case, from the Home Base Control Center, click

on “Tools > Options”, “Refresh Options”, and then enter a broadcast

address compatible with each network interface (for example, enter

255.255.255.0 for 172.16.XXX.XXX, etc.). By doing this, the Windows

problem can be avoided.

Printer Troubleshooting

When sharing a printer, the correct driver must be selected in the Device

Properties’ “Connections” tab. For more information, see the “Printer

Connection Properties” section.

Unreliable operation

Did you install any software just before your trouble occurred? The

software may be causing a problem. Remove the software you

installed and reinstall it.

VPn Troubleshooting

Home Base may not work with VPN (Virtual Private Network) as VPN

filters the connection between the computer and other network devices.

If you have VPN enabled and Home Base does not work, please turn off

the VPN connection.

Does the same problem occur after rebooting your PC? Rebooting

the PC may solve the problem.

resetting Home Base to factory Defaults

You can often resolve issues by resetting Home Base to factory-default

settings and running the setup software again. To reset Home Base to

factory defaults, unplug the power, and push and hold the reset button

down (you will need to use a paper clip or something small to hold it

down) on the bottom side of Home Base. Plug the power back into

Home Base while you are still holding down the reset button. When all of

the LEDs light up on Home Base (after about 4–5 seconds), let go of the

button. Home Base is reset to factory defaults.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

This topic shows you how to create an exception for Control Center in several popular firewall programs. Because firewalls are

designed to block unwanted intrusions into your network, you must specify settings that tell the firewall that Control Center should

be allowed to communicate with the Home Base on your network.

The instructions are for the versions of the firewall programs that appear below. If you have a different version of a given firewall, the

locations of some options may differ from those provided here.

•

Windows Live™ OneCare™

McAfee^®Security Center 2007

Norton™ Internet Security 2007

Trend Micro^®PC-cillin Internet Security 2007

ZoneAlarm^®

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Select “Firewall” and click “Advanced settings”.

Windows live oneCare

Right-click on the Windows Live OneCare icon in the task bar.

Click “Change OneCare settings”.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Select “Programs” and click “Add”.

Select “connect.exe” from the folder where Control Center is

installed. The default path is: C:\Program Files\BELKIN\Home Base

Control Center\Connect.exe.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Check that the software is set to “Allow”. Click “Apply”.

Now go to “Ports and protocols” and click “Add”.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

8. Add a new exception, one for outgoing data.

9. Add another new exception, one for incoming data.

Name

Home Base (Out)

TCP or UDP

TCP

Home Base (In)

TCP or UDP

UDP

Port Range

19540 to 19540

For Connections

Outbound [remote ports]

Scope

Port Range

19540 to 19540

For Connections

Inbound [local ports]

Scope

Internet

10. Check the new exceptions you just created. Make sure that both

exceptions are enabled.

11. Finish the configuration. You must reboot your computer for the

changes to take effect.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Mcafee security Center 2007

Click “Start > All Programs > McAfee”. Select “McAfee

Security Center”.

Expand the “Firewall Protection is enabled” list by clicking on the

arrows (A). Then click “Advanced” (B).

Select “Internet & Network” (A) and then click on the option to

“Configure” (B).

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Ensure that “Program Permissions” on the left is highlighted (A).

Click “Add Allowed Program” (B).

Browse to the folder where Control Center is installed.

The default path is C:\Program Files\BELKIN\Home Base Control

Center\Connect.exe. Select the program (highlighted below) and

click “Open”.

Click “OK”. You may need to reboot your computer for the new

settings to take effect.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

norton Internet security 2007

Go to “Start > All Programs > Norton Internet Security”. Select

“Norton Internet Security”. Expand “Settings” (A), scroll down to

“Internet Security and Firewall Options” (B) and click it.

Select “Program Control”.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Click “Add”.

Browse to the folder where Control Center is installed.

The default path is C:\Program Files\BELKIN\Home Base Control

Center\Connect.exe. Select the program (highlighted below) and

click “Open”.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Program control will then ask you for the appropriate action for this

program. Choose “Allow” and click “OK”.

Click “Apply”. This confirms and applies the exception for Control

Center. Click “OK” to exit. You may need to reboot your computer

for the changes to take effect.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Trend Micro PC-cillin Internet security 2007

Go to “Start > All Programs > Trend Micro PC-cillin Internet

Security 2007”. Select “Trend Micro PC-cillin Internet

Security 2007”.

Click “Settings”.

Click “Personal Network & Firewall Controls” on the left.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Ensure that the option “Direct Internet connection” is highlighted

(A), and then click “Add” (B).

On the next screen ensure that the security level is set to “Low” (A).

Click the “Program Control” tab (B).

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Click “Add”.

Browse to the folder where Control Center is installed.

The default path is C:\Program Files\BELKIN\Home Base Control

Center\Connect.exe.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Select the program “Connect” and click “Open”.

Ensure that the program setting is set on “Simple Mode”

and that the “Allow” option is selected. Click “OK”, and

then “OK” once more.

You may need to reboot your computer for the changes to take effect.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Zonealarm

In Control Center, click “Configure General Hub Settings” under

“Tasks” in Control Center. The “Home Base Settings Properties”

tabs appear. Select the “Connected Home Bases” tab.

4. Select “Firewall”. Select “Zones” and click “Add”.

Write down the IP address of your Home Base.

Right-click on the ZoneAlarm icon in the task bar and open the

ZoneAlarm Control Center.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

fIreWalls

table of contents

sections

Select “IP Address”.

Make sure that the IP address of Home Base is listed in the

“Trusted” zone and click “Firewall”. The connection in Control

Center should now be enabled.

Enter the IP address that you wrote down earlier. Click “OK”.

Verify your settings.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

faQs

table of contents

sections

Q: Why would I want to automatically start a specific piece of

software when I connect to a device?

Control Center and UsB devices

(“available Devices” tab)

a: Many USB items use specific software to carry out their functions.

For example, a webcam will need software to capture video. The

Belkin Control Center enables you to specify that the software

automatically start when a device is connected to the Home Base.

For more information, see Device Properties’ “Connection” tab.

Q: I can see a USB device in Control Center, but I can’t connect to

it. What should I do?

a: Check your firewall settings. During installation, the Control

Center configures the Windows firewall to enable connection,

but third-party firewalls may require additional settings. For more

information about how to configure several specific firewalls, see

the “Firewalls” section.

Q: Do I have to shut down Control Center completely before

installing an update? Do I need to reboot my computer

after installing?

a: No, you can install updates while Control Center is running and

devices are connected. You do not need to reboot your computer

after installing an update.

Q: Does this product work with any-speed USB device?

a: Yes. The Home Base supports Hi-, full-, and low-speed devices.

Information about the type of speed supported by a device is

gathered by Control Center from the device and displayed in the

Device Properties’ “General” tab.

UsB disk drives and other storage devices

Q: Why does the Windows AutoPlay screen appear every time I

connect to a device?

Q: What is a NAS (Network Attached Storage)?

a: By default, Windows automatically plays many types of USB

devices. You can turn off this feature in Windows XP by clicking

“Start” and “Run”. In the “Run” field, type in “gpedit.msc” (without

the quotes). On the “Group Policy” screen, select “Computer

Configuration > Administrative Templates”. Click “System”. Double-

click “Turn off Autoplay”. On the “Setting” tab, select “Disabled”

and click “OK”.

a: A NAS device is a server specifically designed for handling files.

Network Attached Storage is accessible directly on the local area

network (LAN) from multiple users.

Q: What file systems can be used with Home Base in NAS mode?

a: Home Base will automatically mount FAT12, FAT16, FAT32, and

NTFS volumes in NAS mode. Disks using other file systems will be

available to one user at a time in Network USB mode.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

faQs

table of contents

sections

Q: How do I access USB disk drives connected to Home Base?

Q: What is the difference between Network USB mode and

NAS mode?

a: In Windows, Control Center automatically maps a new drive letter

for your computer for each supported USB disk drive connected to

Home Base. You can access the drive by going to “Computer” (or

“My Computer” if you are using Windows XP).

a: In Network USB mode, it is as if the USB device is connected

directly to your computer by a USB cable. If one person is using

a device, no one else will be able to connect to it. Many different

kinds of devices can be used. In NAS mode, a USB device can

be accessed from multiple computers at the same time; this only

works with USB storage devices and file sharing.

You can go to Windows Internet Explorer and type

“\\BK-HBxxxxxx” (where “xxxxxx” is the last six digits of Home

Base’s MAC address, printed on the bottom of Home Base)

into the address bar. Alternatively, you can browse the Windows

network and look for “\\BK-HBxxxxxx” in the list of available

network devices.

Q: Are there any limitations to how much data can be shared?

a: No, the amount of data that can be shared depends on the size

of the connected disk.

For Macintosh^®computers, Control Center automatically mounts

discs connected to Home Base to the desktop. Alternatively, click

“Go > Connect to server” to connect to the disk.

Q: Can files be shared between Windows and Mac OS?

a: Yes, files can be shared between Windows and Mac

Q: How are drive letters mapped on Windows?

OS X computers.

a: When Control Center is running, disk volumes will be mapped to

drive letters starting with Z to avoid collision with commonly used

drive letters.

Q: Can filters be applied to prevent certain people from

accessing files?

a: Files are made public to all computers on the network.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

faQs

table of contents

sections

Q: Can a password be set for a file?

a: Passwords cannot be set. If security is necessary, use

Q: What is the password to log in to the FTP server?

a: The user ID is root, and the password is the password you

file-compression software to create a password-protected archive.

configured on the web page, if any. By default, there is no

password. In this case, log in by pressing the “Enter” key without

entering a password.

Q: Can files be encrypted when used with the Home Base

NAS feature?

Q: Is it safe to unplug a connected USB device at any time?

a: No, files are all saved as they are. This applies to disks formatted

as NTFS, too.

a: The device you are unplugging may be in use by another PC

or accessed by picture sharing, etc. Data may be destroyed if

unplugged suddenly. Always follow the “Safe Removal” procedure

to remove devices.

Q: Can compressed disk drives be used?

a: No, compressed drives cannot be shared via Home Base’s

NAS feature.

Q: Can I log in to a network domain environment using the

NAS mode?

Q: What protocol is used for sharing?

a: A domain environment cannot be logged in to.

a: The Windows file-sharing protocol is used. It is commonly referred

to as SMB or CIFS.

Q: When multiple USB disk drives are connected, can they be set

up to use RAID?

a: A RAID cannot be established using multiple disks attached to

Home Base, but Home Base can access a USB RAID device as a

single disk.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

TeCHnICal sUPPorT

table of contents

sections

You can find technical support information at http://www.belkin.com/networking or www.belkin.com through the tech support

area. If you want to contact technical support by phone, please call:

Belkin Tech support

US: 877-736-5771

800-223-5546 ext.2263

310-898-1100 ext.2263

UK: 0845 607 77 87

Belkin ltd.

Express Business Park, Shipton Way

Rushden, NN10 6GL, United Kingdom

+44 (0) 1933 35 2000

+44 (0) 1933 31 2000 fax

Australia: 1800 235 546

New Zealand: 0800 235 546

Singapore: 65 64857620

Europe: www.belkin.com/support

Belkin B.V.

Boeing Avenue 333

1119 PH Schiphol-Rijk, The Netherlands

+31 (0) 20 654 7300

Belkin International, Inc.

501 West Walnut Street

Los Angeles, CA 90220, USA

310-898-1100

+31 (0) 20 654 7349 fax

Belkin ltd.

4 Pioneer Avenue

310-898-1111 fax

Tuggerah Business Park

Tuggerah, NSW 2259, Australia

+61 (0) 2 4350 4600

+61 (0) 2 4350 4700 fax

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

InforMaTIon

table of contents

sections

This equipment generates, uses, and can radiate radio frequency energy, and if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try and correct the

interference by one or more of the following measures:

fCC statement

DeClaraTIon of ConforMITY WITH fCC rUles for

eleCTroMaGneTIC CoMPaTIBIlITY

We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220,

declare under our sole responsibility that the device,

F5L049

•

Reorient or relocate the receiving antenna.

complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause

undesired operation.

Increase the distance between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Caution: Exposure to Radio Frequency Radiation.

For IEEE 802.11b/g/n products in the USA market, only channels 1 through 11 can

be operated. Selection of other channels is not possible.

The device shall be used in such a manner that the potential for human contact

normal operation is minimized.

This device and its antenna(s) must not be co-located or operating in conjunction

with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with a

minimum distance of 20cm between the radiator and your body.

Modifications

federal Communications Commission notice

The FCC requires the user to be notified that any changes or modifications to this

device that are not expressly approved by Belkin International, Inc., may void the

user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

Industry Canada statement

This device complies with RSS-210 of the Industry Canada Rules. Operation is

subject to the following two conditions:

This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

InforMaTIon

table of contents

sections

EN 301 489-1 V1.8.1: 2008: Electromagnetic compatibility and radio spectrum

matters (ERM); electromagnetic compatibility (EMC) standard for radio equipment

and services; Part 1: Common technical requirements

IMPORTANT NOTE: Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

a minimum distance of 20cm between the radiator and your body. This device has

been designed to operate with an antenna having a maximum gain of 2 dB. An

antenna with a higher gain is strictly prohibited per regulations of Industry Canada.

The required antenna impedance is 50 Ohms.

EN 301 489-17 V1.3.2: 2008: Electromagnetic compatibility and radio spectrum

matters (ERM); electromagnetic compatibility (EMC) standard for radio equipment

and services; Part 17: Specific conditions for 2.4GHz wideband transmission

systems and 5GHz high-performance RLAN equipment

This device is a 2.4GHz wideband transmission system (transceiver), intended for

use in all EU member states and EFTA countries, except in France and Italy where

restrictive use applies.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.

For product available in the USA/Canada market, only channel 1~11 can be

operated. Selection of other channels is not possible.

In Italy the end user should apply for a license at the national spectrum authorities

in order to obtain authorization to use the device for setting up outdoor radio links

and/or for supplying public access to telecommunications and/or network services.

This device and its antenna(s) must not be co-located or operating in conjunction

with any other antenna or transmitter.

This device may not be used for setting up outdoor radio links in France and, in

some areas, the RF output power may be limited to 10mW EIRP in the frequency

range of 2454–2483.5MHz. For detailed information, the end user should contact

the national spectrum authority in France.

To reduce potential radio interference to other users, the antenna type and its gain

should be so chosen that the equivalent isotropically radiated power (EIRP) is not

more than that permitted for successful communication.

open source software

europe – eU Declaration of Conformity

This product contains software that is licensed under the GNU General Public

License (GPL). The corresponding source code is available on the Belkin Open

Source website, http://www.belkin.com/support/opensource /. You can also obtain a

physical copy of the source code upon request at http://www.belkin.com/support/

opensource/. There may be a small charge applied for the physical copy.

This device complies with the essential requirements of the R&TTE Directive 1999/5/

EC.The following test methods have been applied in order to prove presumption of

conformity with the essential requirements of the R&TTE Directive 1999/5/EC:

EN60950-1: 2006: Safety of Information Technology Equipment

The source code that can be found at the website and that is physically distributed

is complete to the best of Belkin’s knowledge. If you believe any additional (or

different) source code should be provided under the GPL, please contact Belkin

at http://www.belkin.com/support/opensource/ and provide in detail the product

part number, version number, firmware version number, and the name of the code

module in question. Belkin is committed to meeting the requirements of the GPL

and of any open source licenses and will make all required source code available.

EN50385: 2002-08: Product standard to demonstrate the compliance of radio base

stations and fixed terminal stations for wireless telecommunication systems with

the basic restrictions or the reference levels related to human exposure to radio

frequency electromagnetic fields (110MHz–40GHz) - General public

EN 300 328 V1.7.1: 2006-10: Electromagnetic compatibility and radio spectrum

matters (ERM); wideband transmission systems; data transmission equipment

operating in the 2.4GHz ISM band and using spread spectrum modulation

techniques; harmonized EN covering essential requirements under article 3.2 of the

R&TTE Directive

For more information on the GPL, please go to http://www.gnu.org/licenses/

licenses.html. A copy of the full GPL License is included on the setup CD. (Open

My Computer, right-click on your CD/DVD drive, and select “Explore”, e.g., D:\GPL

License.txt.)

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

InforMaTIon

table of contents

sections

Belkin International, Inc., limited 1-Year Product Warranty

What this warranty covers.

What is not covered by this warranty?

All above warranties are null and void if the Belkin product is not

provided to Belkin for inspection upon Belkin’s request at the sole

expense of the purchaser, or if Belkin determines that the Belkin product

has been improperly installed, altered in any way, or tampered with.

The Belkin Product Warranty does not protect against acts of God such

as flood, lightning, earthquake, war, vandalism, theft, normal-use wear

and tear, erosion, depletion, obsolescence, abuse, damage due to low

voltage disturbances (i.e. brownouts or sags), non-authorized program,

or system equipment modification or alteration.

Belkin International, Inc. (“Belkin”) warrants to the original purchaser of

this Belkin product that the product shall be free of defects in design,

assembly, material, or workmanship.

What the period of coverage is.

Belkin warrants the Belkin product for one year.

What will we do to correct problems?

Product Warranty.

Belkin will repair or replace, at its option, any defective product free of

charge (except for shipping charges for the product). Belkin reserves the

right to discontinue any of its products without notice, and disclaims any

limited warranty to repair or replace any such discontinued products.

In the event that Belkin is unable to repair or replace the product (for

example, because it has been discontinued), Belkin will offer either a

refund or a credit toward the purchase of another product from Belkin.

com in an amount equal to the purchase price of the product as

evidenced on the original purchase receipt as discounted by its

natural use.

How to get service.

To get service for your Belkin product you must take the following steps:

1. Contact Belkin International, Inc., at 501 W. Walnut St.,

Compton, CA 90220, Attn: Customer Service, or call (800)-223-5546,

within 15 days of the Occurrence. Be prepared to provide the

following information:

a. The part number of the Belkin product.

b. Where you purchased the product.

c. When you purchased the product.

d. Copy of original receipt.

2. Your Belkin Customer Service Representative will then instruct you

on how to forward your receipt and Belkin product and how to

proceed with your claim.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

InforMaTIon

table of contents

sections

Belkin reserves the right to review the damaged Belkin product. All

IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL,

DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH

AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING

OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

costs of shipping the Belkin product to Belkin for inspection shall be

borne solely by the purchaser. If Belkin determines, in its sole discretion,

that it is impractical to ship the damaged equipment to Belkin, Belkin

may designate, in its sole discretion, an equipment repair facility to

inspect and estimate the cost to repair such equipment. The cost, if any,

of shipping the equipment to and from such repair facility and of such

estimate shall be borne solely by the purchaser. Damaged equipment

must remain available for inspection until the claim is finalized.

Whenever claims are settled, Belkin reserves the right to be subrogated

under any existing insurance policies the purchaser may have.

This warranty gives you specific legal rights, and you may also have

other rights, which may vary from state to state. Some states do not

allow the exclusion or limitation of incidental, consequential, or other

damages, so the above limitations may not apply to you.

How state law relates to the warranty.

THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN.

THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS

REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY

OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY,

ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty

lasts, so the above limitations may not apply to you.

Home Base

Download from Www.Somanuals.com. All Manuals Search And Download.

Belkin Tech support

US: 877-736-5771

800-223-5546 ext.2263

310-898-1100 ext.2263

UK: 0845 607 77 87

Belkin International, Inc.

501 West Walnut Street

Los Angeles, CA 90220, USA

310-898-1100

Belkin B.V.

Boeing Avenue 333

1119 PH Schiphol-Rijk, The Netherlands

+31 (0) 20 654 7300

+31 (0) 20 654 7349 fax

310-898-1111 fax

Australia: 1800 235 546

New Zealand: 0800 235 546

Singapore: 65 64857620

Europe: www.belkin.com/support

Belkin ltd.

4 Pioneer Avenue

Tuggerah Business Park

Tuggerah, NSW 2259, Australia

+61 (0) 2 4350 4600

+61 (0) 2 4350 4700 fax

Express Business Park, Shipton Way

Rushden, NN10 6GL

United Kingdom

+44 (0) 1933 35 2000

+44 (0) 1933 31 2000 fax

manufacturers listed. Mac OS and Macintosh are trademarks of Apple Inc., registered in the U.S. and other

countries. Windows, Windows Live, OneCare, Internet Explorer, and Windows Vista are either registered

trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Download from Www.Somanuals.com. All Manuals Search And Download.

Blackberry Cell Phone 8300 Series User Manual
Black Box Network Card VGA USB Adapter User Manual
Bogen Speaker System FH 1 User Manual
Bradley Smoker Smoker BTDS108CE EU User Manual
Briggs Stratton Automobile Parts 19D User Manual
Bryan Boilers Boiler Forced Draft Steam Boilers User Manual
Cadco Food Warmer CDR 1T User Manual
Califone Headphones 2924AVP 12 User Manual
Chamberlain Door EL MODELS User Manual
Chariot Carriers Car Seat 51100913 User Manual