Hi-Speed USB 2.0 Media
Reader & Writer with
3-Port Hub
Transfer data and connect USB
peripherals with one device
DoUwnsloeadrfrMomaWnwuwa.SlomFa5nUu2a7ls1.ceoam. All Manuals Search And Download.
Introduction
Congratulations
Thank you for purchasing the Belkin Hi-Speed USB 2.0 Media Reader &
Writer with 3-Port Hub (the Reader). This innovative product reads the
following popular flash-memory formats.
1
2
___
3
___
• CompactFlash® Type I and Type II / CompactFlash® Extreme Card
• IBM® Microdrive™
4
___
• SmartMedia™
• SmartMedia™ RAM Card
• Secure Digital / Mini SD*
• MultiMediaCard / RSMMC (Reduced Size MultiMediaCard)* / High Speed
MultiMedia Card
• XD Picture Card
• Memory Stick® / Memory Stick Duo™*,
• Memory Stick Pro™ / Memory Stick Pro Duo™*,
• Memory Stick MagicGate™ / Memory Stick MagicGate Duo™*
(non-secure mode only)
• MultiMedia Card 4.0
• Memory Stick MagicGate Pro™*
• Memory Stick Select Function card
• High Speed Memory Stick
• Memory Stick Ultra II
*Requires use of adapter included with media card
compatibility list.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
1
2
___
3
___
4
___
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The Reader features a built-in Hi-Speed USB 2.0 3-Port Hub. It enables
you to connect USB devices with a critical advantage over traditional USB
2.0 hubs. That is its implementation of the new “Quad TT” architecture,
which enables each of the Hub’s three downstream ports to deliver a full
12Mbps of USB bandwidth for low- and full-speed devices, while providing
total support for Hi-Speed USB 2.0 devices. This is especially important
when connecting multiple, bandwidth-intensive, full-speed devices such as
USB webcams, speakers, scanners, and external storage devices.
1
2
___
3
___
4
___
In addition to Readers, Belkin manufactures an entire line of USB and PC
accessories. Please visit belkin.com for details.
Reader Features
• Easy transfer of data between slots
• Quick and easy access to digital photos, MP3s, and other digital files
• Functionality as a removable media storage device
• Bus- or self-powered; no power supply required in most circumstances
• Plug-and-Play, hot swap capability
• Drag-and-drop file transfer
• Custom drive icon support using the included driver
• Belkin Lifetime Warranty
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Introduction
Hub Features
• Compliant with Universal Serial Bus Specification 2.0
(data rate 1.5/12/480Mbps)
1
2
___
• Backward-compatible with Universal Serial Bus Specification 1.1
(data rate 1.5/12Mbps)
3
___
• Compatible with Windows® 98 SE, Me, 2000, and XP
• Approved by USB Implementers Forum (USB-IF)
• Plug-and-Play support
4
___
• Support for hot swapping of USB devices
• Overcurrent detection and protection
• Individual port-status indicator LEDs
• Three 480Mbps downstream ports
• Bus- or self-powered
• Compatibility with USB 1.1 and USB 2.0 devices
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Hub Specifications
Upstream Ports
1
(1)
2
Downstream Ports
Per-Port Voltage
Per-Port Current
Power Mode
(3)
___
DC +5V
3
500mA (max)
___
Self-powered/bus-powered
5ºC ~ 40º C
4
___
Operating Temperature
Storage Temperature
Enclosure
-20º C ~ 60º C
ABS plastic
Power Supply
Output: DC 5V 2.0A
Plug Size: 3.5mm (outer)
1mm (center)
Plug Polarity: Center positive
USB Hub Port-Status LED Color Definitions:
Off
No USB device present
USB device installed and initialized
Red
Reader Status LED Color Definitions
Off
Normal state
Data being transferred
Flashing Red
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Introduction
System Requirements
• Computer with available USB port (USB 2.0 port for Hi-Speed mode)
1
2
• Windows 98 SE, Me, 2000, or XP
___
• Mac OS® 9.x or Mac OS X v10.1.2* or higher (custom icons not
supported in OS X)
3
___
4
___
*Hi-Speed USB 2.0 is supported in OS X v10.2.8 and above.
Package Contents
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
• Belkin Hi-Speed USB 2.0 Media Reader & Writer with 3-Port Hub
• USB Device Cable
• Power Supply
• User Manual
1
___
2
• Installation CD
3
___
4
___
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Installation Procedure for Windows
Media Insertion
To prevent damage to your Reader and/or media card, be sure to insert
the media card correctly into the Reader. See the drawings below that
illustrate the proper orientation for insertion of your media card.
1
___
2
3
___
Important Note: The Reader uses a combination slot designed to
accommodate both XD Picture Card and SmartMedia card formats.
Only a single card may be plugged into the combination slot at any time.
4
___
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Procedure for Windows
1
___
Installation Procedure for Windows
IMPORTANT NOTE: DO NOT PLUG READER INTO COMPUTER
UNTIL INSTRUCTED TO DO SO
2
3
Windows 98 SE, Me, 2000, XP
___
4
Driver Installation
___
1.
Insert the Belkin Driver Installation CD.
a)
After a few moments, the setup application will appear on
your computer screen.
b)
If the setup application does not appear, double-click “My
Computer”, and then click on your CD-ROM drive icon. This
will load the setup application’s main page.
2.
Click the “Install Driver” button.
3.
The “InstallShield Wizard” will now start. Click “Next” on each of the
screens that are displayed, and then click “Finish”. Now, restart your
computer to complete the driver installation process.
Important Operating System Notes:
a)
Windows Me and XP offer native support for mass-storage devices.
It is not necessary to install the Belkin driver in order to use the
Reader. However, if you wish to take advantage of the custom drive
icons, the driver must be installed.
b)
Windows 2000 also offers native support for mass-storage devices,
but in versions prior to Service Pack 3, does not support “multi-
LUN” devices. If the Belkin driver is not installed in Windows 2000
versions prior to Service Pack 3, only the CompactFlash slot will be
available. Furthermore, if you wish to take advantage of the custom
drive icons, the driver must be installed.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Installation Procedure for Windows
c)
Windows 98 SE does not support mass-storage devices; therefore,
the Belkin driver must always be installed.
1
___
Hardware Installation
2
3
Important Note: Please do not connect any USB devices to the Hub’s
ports until the installation process has been completed.
___
4
___
1.
Plug the AC adapter into a wall outlet or surge suppressor. Plug
the DC connector into the DC power jack found on the rear of the
Reader.
Note: The hub may be used without the power supply with
most USB devices.
2.
Plug the flat end (USB-A connector) of the provided USB device
cable into the downstream port of your computer, or downstream
port of another hub. Plug the small end (USB-B mini-B connector)
into the USB-B mini-B connector on the back of the Reader.
Important Note: The Reader must be connected to a USB 2.0-compliant
host in order to function in Hi-Speed mode (480Mbps data rate). If the Hub
is connected to a USB 1.1-compliant host, it will operate only in low-speed
or full-speed mode (1.5Mbps/12Mbps).
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Procedure for Windows
3.
Windows will now detect your Hub and the “Hardware Installation
Wizard” will start. Please use all of the default settings provided
by the “Hardware Installation Wizard” to complete the hardware
installation procedure. Simply click “Next” at the bottom of each of
the installation screens, and then click “Finish” to complete the Hub
installation process. Under windows XP the drivers will be installed
automatically.
1
___
2
3
___
4
___
Note: The Windows “Install New Hardware Wizard” may prompt you to
provide your Windows Installation CD to complete the driver installation
process.
Important Note: Hi-Speed hub drivers are included with most USB 2.0
PCI upgrade cards, and are pre-installed along with the PCI card drivers.
Please check with your PCI card manufacturer for the most recent USB 2.0
driver.
4.
5.
After installation of the Hub is completed, the Reader’s ports will be
installed. No further user input is required.
The Reader will be recognized as four individual removable disk
drives. To access the new drive(s), click the “My Computer”
icon found on your Windows desktop display. When the “My
Computer” window opens, you will see a customized disk drive icon
representing each of the four slots. (See the “Operating System
Notes” section regarding custom icon support.)
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting USB Devices to the Hub
1
___
1.
2.
Plug the USB-A connector of the USB device(s) you wish to connect
into any of the Hub’s available downstream ports.
2
___
Follow the installation instructions provided by the manufacturer of
the device.
3
4
___
Important Note: When moving a device from one port on the Hub to
another, it may be necessary to reinstall the USB drivers for that device.
Safe Removal of Media Cards and Readers
All versions of Windows
1.
Do not remove your media card from the Reader while data is being
read or written to the card. Doing so could corrupt the media card
resulting in a loss of data. The correct way to remove the card
is to double-click on “My Computer”, and then right-click on the
drive and select “Eject” from the list. Depending on your operating
system, this feature may not prompt you that the “Eject” was done.
However, after clicking on “Eject”, you can remove the card without
corrupting the files on the card.
2.
To safely remove a Reader from your computer, click on the “Unplug
or Eject Hardware” icon found in the right-hand corner of the
Windows task bar. Failure to follow this step could result in the loss
or corruption of data stored on your media card.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Procedure for Mac OS
Uninstalling your Reader
1
___
2
All versions of Windows
___
3
1.
To uninstall the Reader’s driver, click the “Start” button, select
“Settings”, select “Control Panel”, and then select “Add/Remove
Programs”. Choose “Belkin Media Reader Driver and Icon”, and then
click “Remove”.
4
___
Note: This procedure is only necessary if the Belkin
driver has been installed.
2.
You may also perform the uninstall from Windows Device Manager.
(To uninstall from Windows Device Manager, the Reader must be
plugged into your computer.) Right-click on “My Computer”, then
select “Properties”, then “Device Manager”. Click on the (+) sign
next to “Disk Drives”. Select the Reader from the list of drives, and
then click on “Remove”. Now unplug the Reader from the USB port
on your computer or hub.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Procedure for Mac OS
1
Installation Procedure for Mac OS
___
Mac OS 9.0–9.x
2
___
Driver Installation
3
1.
2.
Insert the Belkin Reader’s Installer CD.
Double-click the “F5U271 Installer CD” CD-ROM drive icon that
appears on your desktop. Then, click on “Belkin installer 1.7”.
4
___
3.
4.
Follow the on-screen instructions to complete driver installation.
Connect the Reader’s USB plug to an available USB port on your
Mac® computer, or USB hub, and insert your media card.
5.
Once a media card is inserted, it will appear on your desktop as
a standard Mac OS disk drive. A custom drive icon will appear for
each slot according to the media type. The drive icon will appear
only when a media card is inserted into its slot.
Mac OS X v10.1.2 and above
Important Note: Please do not connect any USB devices to the Hub’s
1.
Mac OS X v10.1.2 and above offers native support for mass-storage
devices. To install the Reader, simply plug it into an available USB
port on your Mac computer or USB hub. No further user intervention
is required.
Note: Support for Hi-Speed 2.0 mode (480Mbps) is limited to Mac OS X
v10.2.8 and above. If the Reader is used with a version of Mac OS X prior
to X v10.2.8, it will be fully functional, but will operate only in full-speed
mode (12Mbps).
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Procedure for Mac OS
1
___
2
___
3
4
___
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Custom icon support is currently unavailable for any
version of OS X.
1
___
2.
Once a media card is inserted, it will appear on your desktop as a
standard Mac OS disk drive. A drive icon will appear for each slot,
but only when a media card is resident in the slot.
2
___
3
___
Hardware Installation
4
Important Note: Please do not connect any USB devices to the Hub’s
ports until the installation process has been fully completed.
1.
Plug the AC adapter into a wall outlet or surge suppressor. Plug
the DC connector into the DC power jack found on the rear of the
Reader.
Note: The Hub may be used without the power supply with most USB
devices.
2.
Plug the flat end (USB-A connector) of the provided USB device
cable into the downstream port of your computer, or downstream
port of another hub. Plug the small end (USB-B mini-B connector)
into the USB-B mini-B connector on the back of the Reader.
3.
4.
The Reader is now fully functional and ready to use.
The Reader will be recognized as four individual removable disk
drives. To access the new drive(s), click the “My Computer”
icon found on your Windows desktop display. When the “My
Computer” window opens, you will see a customized disk drive icon
representing each of the four slots. (See the “Operating System
Notes” section regarding custom icon support.)
Connecting USB Devices to the Hub
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Plug the USB-A connector of the USB device(s) you wish to connect
Belkin Ltd.
Express Business Park, Shipton Way,
Rushden NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, Netherlands
+31 (0) 20 654 73 00
+31 (0) 20 654 73 49 fax
Belkin GmbH
Hanebergstrasse 2
80637 Munich, Germany
+49 (0) 89 14 34 05 0
+49 (0) 89 14 34 05 100 fax
Belkin SAS
130, rue de Silly
92100 Boulogne-Billancourt, France
+33 (0) 1 41 03 14 40
+33 (0) 1 41 31 01 72 fax
Belkin Iberia
Avda. Cerro del Aguila 3
28700 San Sebastián de los Reyes, Spain
+34 (0) 9 16 25 80 00
Please visit our website www.belkin.com
for technical support or further information.
+34 (0) 9 02 02 00 34 fax
Belkin Nordic
Disposal of Waste Equipment by Users in
Private Households in the European Union:
For more information, go to
Knarrarnäsgatan 7
164 40 Kista, Sweden
+46 (0) 8 5229 1870
+46 (0) 8 5229 1874 fax
© 2006 Belkin Corporation.
All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
Mac OS and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
Download from Www.Somanuals.com. All Manuals Search And Download.
|