BOXLIGHT Projector MP 36t User Manual

USER’S GUIDE  
BOXLIGHT MP-37t  
BOXLIGHT MP-36t  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Unplug this projector from wall outlet and refer servicing to  
All the safety and operating instructions should be read  
qualified service personnel under the following conditions:  
before the product is operated.  
a. When the power cord or plug is damaged or frayed.  
b. If liquid has been spilled into the projector.  
c. If the projector has been exposed to rain or water.  
d. If the projector does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as improper  
adjustment of other controls may result in damage and  
will often require extensive work by a qualified technician  
to restore the projector to normal operation.  
e. If the projector has been dropped or the cabinet has been  
damaged.  
f. When the projector exhibits a distinct change in  
performance-this indicates a need for service.  
Read all of the instructions given here and retain them for  
later use. Unplug this projector from AC power supply  
before cleaning. Do not use liquid or aerosol cleaners. Use  
a damp cloth for cleaning.  
Do not use attachments not recommended by the  
manufacturer as they may cause hazards.  
Do not place this projector on an unstable cart, stand, or  
table. The projector may fall, causing serious injury to a  
child or adult, and serious damage to the projector. Use  
only with a cart or stand recommended by the  
manufacturer, or sold with the projector. Wall or shelf  
mounting should follow the manufacturer's instructions,  
and should use a mounting kit approved by the  
manufacturer.  
When replacement parts are required, be sure the service  
technician has used replacement parts specified by the  
manufacturer that have the same characteristics as the  
original part. Unauthorized substitutions may result in fire,  
electric shock, or injury to persons.  
Do not expose this unit to rain or use near water... for  
example, in a wet basement, near a swimming pool, etc...  
Slots and openings in the back and bottom of the cabinet  
are provided for ventilation, to insure reliable operation of  
the equipment and to protect it from overheating.  
Upon completion of any service or repairs to this projector,  
ask the service technician to perform routine safety checks  
to determine that the projector is in safe operating condition.  
This projector is equipped with a  
grounding type AC line plug.  
Should you be unable to insert the  
plug into the outlet, contact your  
electrician. Do not defeat the safety  
The openings should never be covered with cloth or other  
material, and the bottom opening should not be blocked by  
placing the projector on a bed, sofa, rug, or other similar  
surface. This projector should never be placed near or  
over a radiator or heat register.  
purpose of this grounding type plug.  
GROUND  
This projector should not be placed in a built-in installation  
such as a bookcase unless proper ventilation is provided.  
Follow all warnings and instructions marked on the  
projectors.  
This projector should be operated only from the type of  
power source indicated on the marking label. If you are not  
sure of the type of power supplied, consult your authorized  
dealer or local power company.  
For added protection to the projector during a lightning  
storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet. This will  
prevent damage due to lightning and powerline surges.  
Do not overload wall outlets and extension cords as this  
can result in fire or electric shock. Do not allow anything to  
rest on the power cord. Do not locate this projector where  
the cord may be damaged by persons walking on it.  
An appliance and cart combination  
should be moved with care. Quick  
stops, excessive force, and uneven  
surfaces may cause the appliance  
and cart combination to overturn.  
Never push objects of any kind into this projector through  
cabinet slots as they may touch dangerous voltage points  
or short out parts that could result in a fire or electric  
shock. Never spill liquid of any kind on the projector.  
If the projector is to be built into a compartment or similarly  
enclosed, the minimum distances must be maintained.  
Do not cover the ventilation slot on the projector.  
Heat build-up can reduce the service life of your projector,  
and can also be dangerous.  
Do not attempt to service this projector yourself as opening  
or removing covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to qualified service  
personnel.  
WALL  
PROJECTOR  
(SIDE)  
PROJECTOR  
(FRONT)  
50cm  
50cm  
50cm  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
PAGE  
PAGE  
MENU OPERATION  
30-31  
30  
FEATURES AND DESIGN  
COMPATIBILITY  
5
5
MODE SELECT  
SOUND ADJUSTMENT  
31  
IMAGE RESOLUTION  
5
LANGUAGE ADJUSTMENT  
31  
AUTOMATIC MULTISCANNING SYSTEM  
MULTILANGUAGE MENU DISPLAY  
LASER POINTER FUNCTION  
OTHER FEATURES  
5
5
5
5
5
5
VIDEO MODE  
COLOR SYSTEM SELECT  
32-35  
32  
33  
34  
35  
VIDEO SOURCE SELECT  
UNPACKING THE PROJECTOR  
TRADEMARKS  
PICTURE IMAGE ADJUSTMENT  
PICTURE SCREEN ADJUSTMENT  
INSTALLATION  
6-9  
COMPUTER MODE  
36-48  
36  
NAME OF EACH PART OF THE PROJECTOR  
SETTING-UP THE PROJECTOR  
MOVING THE PROJECTOR  
6
7
8
9
COMPUTER SYSTEM SELECT  
COMPATIBLE COMPUTER SPECIFICATIONS  
AUTO IMAGE FUNCTION  
37  
38  
POWER REQUIREMENTS  
PICTURE IMAGE ADJUSTMENT  
PICTURE POSITION ADJUSTMENT  
PC ADJUSTMENT  
39  
40  
CONNECTING THE PROJECTOR 10-18  
41-44  
45  
TERMINAL OF THE PROJECTOR  
CONNECTING THE COMPUTER  
CONNECTING THE VIDEO EQUIPMENT  
10  
PICTURE SCREEN ADJUSTMENT  
11-15  
16-18  
OTHER FUNCTION SETTING  
46-48  
BLUE BACK  
46-47  
46-47  
46-47  
46-47  
46-47  
46-47  
46-47  
48  
BEFORE OPERATION  
19-26  
DISPLAY  
CONTROLS AND INDICATORS  
OPERATION OF THE REMOTE CONTROL  
CONTROL THE PROJECTOR  
DIRECT OPERATION  
19-20  
21-23  
24-26  
24  
CEILING  
REAR  
SPLIT WIPE  
POWER MANAGEMENT  
REMOTE CONTROL (Mode 1 or Mode 2)  
LAMP AGE  
MENU OPERATION  
25-26  
BASIC OPERATION  
27-31  
TURNING ON/OFF THE PROJECTOR  
27  
27-29  
27  
28  
28  
28  
28  
28  
28  
29  
29  
29  
29  
29  
APPENDIX  
MAINTENANCE  
49-53  
49-51  
DIRECT OPERATION  
MODE SELECT  
TEMPERATURE WARNING INDICATOR  
AIR FILTER CARE AND CLEANING  
LAMP REPLACEMENT  
49  
SOUND VOLUME ADJUSTMENT  
SOUND MUTE FUNCTION  
ZOOM ADJUSTMENT  
49  
50  
CLEANING THE LENS  
51  
FOCUS ADJUSTMENT  
TROUBLESHOOTING  
51-52  
53  
DIGITAL ZOOM FUNCTION  
KEYSTONE FUNCTION  
NO SHOW FUNCTION  
TECHNICAL SPECIFICATIONS  
FREEZE PICTURE FUNCTION  
AUTO IMAGE FUNCTION  
NORMAL PICTURE FUNCTION  
P-TIMER FUNCTION  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES AND DESIGN  
This Boxlight MP-37t/MP-36t that combines powerful and sophisticated features with easy-to-use, intuitive controls.  
Built-in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD)  
technology. The projector is ideal for high-performance business, training and imaging applications that demand  
exceptional color quality.  
COMPATIBILITY  
OTHER FEATURES  
The projector is compatible with many different types of  
personal computers and video devices, including:  
This projector has Motor Zoom/Focus, No Show, Picture  
Freeze, Keystone, Mute Functions.  
G IBM-compatible computers, including laptops, up to  
1280 x 1024 resolution.  
G Apple Macintosh and PowerBook computers up to  
1280 x 1024 resolution.  
G Various VCRs, video disc players, video cameras,  
DVD players, satellite TV tuners or other AV  
equipment using any of the worldwide video  
standards, including NTSC, NTSC4.43, PAL, PAL-M,  
PAL-N and SECAM.  
UNPACKING THE PROJECTOR  
The projector comes with the parts listed below. Verify  
that all the parts are included. If any parts are missing,  
contact Boxlight Corporation.  
G Owner's Manual.  
G AC Power Cord.  
G Remote Control Unit.  
G Batteries for Remote Control Units.  
G VGA Cable.  
G Mouse Cable for PS/2 port.  
G Mouse Cable for serial port.  
G Mouse Cable for ADB port.  
G VGA/MAC Adapter.  
G Protective Dust Cover.  
G Lens Cover.  
IMAGE RESOLUTION  
The resolution of the projector's projected image is 1024  
x 768. The projector displays computer images just as  
they appear on your computer's monitor. Screen  
resolutions between 1024 x 768 and 1280 x 1024 are  
compressed to 1024 x 768. The projector cannot display  
screen resolutions above 1280 x 1024. If your computer's  
screen resolution is higher than 1280 x 1024, reset it to a  
lower resolution before you connect the projector.  
TRADEMARKS  
G Apple, Macintosh, and PowerBook are trademarks or  
registered trademarks of Apple Computer, Inc.  
G IBM and PS/2 are trademarks or registered trademarks  
of International Business Machines, Inc.  
G Windows is a trademarks or registered trademarks of  
Microsoft Corporation.  
AUTOMATIC MULTISCANNING SYSTEM  
This projector can detect display signals from most  
personal computers currently distributed. It is free from  
complicated adjustments to project picture images from  
PC.  
G Other trademarks are the property of their respective  
owners  
MULTILANGUAGE MENU DISPLAY  
MENU DISPLAY is displayed with ; English, German,  
French, Italian, Spanish and Japanese.  
LASER POINTER FUNCTION  
The Remote Control Unit of this projector includes the  
Laser Pointer function providing the ability to point and  
highlight during presentations.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
NAME OF EACH PART OF THE PROJECTOR  
FRONT OF THE PROJECTOR  
PROJECTION LENS  
INFRARED  
REMOTE  
RECEIVER  
FEET LOCK  
LATCH  
AIR INTAKE VENT  
REMOVABLE  
LENS COVER  
FEET LOCK  
LATCH  
SPEAKERS  
REAR OF THE PROJECTOR  
EXHAUST VENT  
INFRARED  
REMOTE  
RECEIVER  
CAUTION HOT AIR!  
Air blown from the exhaust vent is hot.  
Observe the following when handling your  
projector or choosing a location to install it.  
G Keep heat-sensitive objects away from the  
exhaust port.  
G If you set the projector on top of a metallic  
surface, the surface will become hot because of  
the hot air exhaust. Be careful when handling.  
G Do not touch the cabinet near to the exhaust  
vent area, and especially screws and metallic  
parts. These parts will become hot while the  
projector is used.  
CARRYING  
HANDLE  
POWER CORD  
CONNECTOR  
MAIN ON/OFF  
SWITCH  
BOTTOM OF THE PROJECTOR  
ADJUSTABLE  
FEET  
LAMP  
COVER  
AIR INTAKE VENT  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
SETTING-UP THE PROJECTOR  
G This projector is basically designed to project on a flat projection surface.  
G This projector can be focused from 4.6' (1.4 m) ~ 47.3' (14.4 m).  
G Refer to the figure below as an example when positioning the projector to the screen.  
POSITIONING:  
ROOM LIGHT  
400"  
Maximum Zoom  
Minimum Zoom  
300"  
The level of brightness in a room has a great  
influence on picture quality. It is recommended  
to limit ambient lighting in order to provide the  
best image.  
250"  
308"  
200"  
231"  
H1  
H2  
150"  
100"  
192"  
154"  
60"  
115"  
40"  
77"  
46"  
31"  
DISTANCE  
60"  
46"  
100"  
77"  
150"  
115"  
200"  
154"  
300"  
231"  
40"  
31"  
250"  
400"  
Max. Zoom  
Min. Zoom  
Screen  
Size  
192"  
308"  
7.2' (2.2m) 11.8' (3.6m) 17.7' (5.4m) 23.6' (7.2m)  
35.4' (10.8m)  
4.6' (1.4m)  
29.5' (9.0m)  
47.3' (14.4m)  
Distance  
150"  
200"  
250"  
300"  
400"  
40"  
60"  
100"  
Screen Size  
(W x H) inch  
120 x 90  
85.7 inch  
4.3 inch  
160 x 120  
114.3 inch  
5.7 inch  
200 x 150  
142.8 inch  
7.2 inch  
240 x 180  
171.4 inch  
8.6 inch  
320 x 240  
228.6 inch  
11.4 inch  
32 x 24  
22.8 inch  
1.2 inch  
48 x 36  
34.2 inch  
1.8 inch  
80 x 60  
57.1 inch  
2.9 inch  
Height (H1)  
Height (H2)  
VENTILATION  
This projector is equipped with cooling fan to protect it from  
overheating. Pay attention to the following to ensure proper  
ventilation and avoid a possible risk of fire and malfunction.  
G Do not cover the vents with papers or other materials.  
G Keep the rear grill at least 3 feet (1 m) away from any  
object.  
G Make sure that there are no objects under the projector.  
An object under the projector may prevent the projector  
from taking the cooling air through the bottom vent.  
EXHAUST VENT  
(REAR SIDE)  
AIR INTAKE VENT  
(BOTTOM SIDE)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
ADJUSTABLE FEET  
FEET LOCK LATCHES  
Picture tilt and projection angle can be adjusted by rotating the  
ADJUSTABLE FEET. Projection angle can be adjusted 0 to 6°.  
1. Lift the front of the projector and press the FEET LOCK  
LATCHES on both sides of the projector.  
Release the FEET LOCK LATCHES to lock the ADJUSTABLE  
FEET and rotate the ADJUSTABLE FEET to fine tune the  
position and the tilt.  
2.  
3. To shorten the ADJUSTABLE FEET, lift the front of the  
projector and press and undo the FEET LOCK LATCHES.  
DOWN  
DOWN  
UP  
NOTE: The position and the keystone distortion of the image can  
also be adjusted using the KEYSTONE function.  
(See pages 28, 35 and 45).  
UP  
ADJUSTABLE  
FEET  
MOVING THE PROJECTOR  
Use the carrying handle when moving the projector.  
Replace the lens cover and retract the adjustable feet when  
moving the projector to prevent damage to the projector.  
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR  
G Do not drop or bump the projector, otherwise damages or malfunctions may result.  
G When transporting the projector, use a Boxlight recommended Carrying Case.  
G Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause  
damage to the projector. To transport the projector through a courier or transport service, use a Boxlight  
recommended Case.  
G For a carrying or transportation cases, contact a Boxlight at 1-800-762-5757 or 360-779-7901.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
POWER REQUIREMENTS  
Your projector uses nominal input voltages of 100-120 VAC or 200-240 VAC. The  
projector automatically selects the correct input voltage. The projector is designed  
to work with single-phase power systems having a grounded neutral conductor. To  
reduce the risk of electrical shock, do not plug into any other type of power system.  
Consult your authorized dealer or service station if you are not sure what type of  
power is supplied to your building.  
AC outlet side (Male)  
Projector side (Female)  
Connect the AC power supply cord  
(supplied) to the projector.  
The socket-outlet must be near this  
equipment and must be easily  
accessible.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE PROJECTOR  
TERMINAL OF THE PROJECTOR  
REAR OF THE PROJECTOR  
2
1
3
MONITR OUT  
COMPUTER IN 1  
COMPUER IN 2  
6
7
CONTROL PORT 1  
CONTROL PORT 2  
EXT. SP (8Ω)  
AUDIO 1  
AUDIO 2  
(STEREO)  
(STEREO)  
(STEREO)  
4
5
12  
R
AUDIO  
L
(MONO)  
Y
Cb/Pb  
Cr/Pr  
VIDEO  
SIDEO  
8
9
10  
11  
AUDIO INPUT JACKS  
Used to connect an audio input to the projector.  
COMPUTER INPUT-1 TERMINAL  
Used to connect a computer to the projector.  
8
9
1
2
VIDEO INPUT JACK  
Used to connect a video source to the projector.  
COMPUTER INPUT-2 TERMINAL  
Used to connect a computer to the projector.  
S-VIDEO INPUT JACK  
Used to connect a S-VHS video source to the  
projector.  
3 MONITOR OUTPUT TERMINAL  
10  
Used to connect a monitor to the projector.  
4
COMPUTER AUDIO INPUT-1 JACK  
mini stereo type  
COMPONENT VIDEO INPUT JACKS  
Used to connect a component video source to the  
projector.  
11  
12  
Used to connect a computer audio input to the projector.  
5 CONTROL PORT-1 CONNECTOR  
EXT. SP. JACK (3.5 mm mini stereo type)  
Used to connect an external speaker system.  
Used to connect a mouse cable to the projector.  
6
COMPUTER AUDIO INPUT-2 JACK  
mini stereo type  
Used to connect a computer audio input to the projector.  
7
CONTROL PORT-2 CONNECTOR  
Used to connect a mouse cable to the projector.  
NOTE: Control port-2 connector can be also used as  
serial port (RS-232C).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE PROJECTOR  
CONNECTING THE COMPUTER  
CONNECTING TO THE COMPUTER INPUT TERMINALS (1 and 2)  
Personal computers can be connected to the HDB15-pin (VGA) terminal on the projector.  
G Connect the computer to these terminals using the VGA cable and VGA/Macintosh adapter (provided).  
CAUTION: For projectors, the VGA cable provided is designed to reduce RFI (Radio Frequency Interference) emissions.  
For regulatory compliance reasons, this cable must be used and must not be replaced by any other cable.  
CONNECTING TO THE MONITOR OUTPUT TERMINAL  
This terminal output the information of the selected computer source being viewed on the screen (Computer 1 or Computer 2).  
When video source is selected, this terminal outputs Computer 1 input information.  
An external monitor can be connected to the HDB15-pin (VGA) terminal on the projector.  
G Connect the monitor to this terminal using the VGA cable (not provided).  
Pin No./Signal  
1 Red input  
2 Green input  
3 Blue input  
Pin No./Signal  
9 Non Connect  
10 Ground (Vert. sync.)  
11 Sense 0  
5
4
3
2
1
HDB 15-PIN  
TERMINAL  
10  
9
8
7
6
4 Sense 2  
12 Sense 1  
5 Ground (Horiz.sync.)  
6 Ground (Red)  
7 Ground (Green)  
8 Ground (Blue)  
13 Horiz. sync  
14 Vert. sync  
15 Reserved  
15 14 13 12 11  
CONNECTING TO THE COMPUTER AUDIO INPUT JACKS (1 and 2)  
G Connect audio outputs from your computer to these jacks using the audio cable (not provided).  
CONNECTING TO THE CONTROL PORT (DIN 8 PIN) CONNECTORS (1 and 2)  
G If you wish to control the computer with projector's remote control unit, you must connect control port (PS/2, Serial or  
ADB port) on your computer to projector's control port with cable. (three type cables supplied; for PS/2 Port, Serial Port  
and ADB Port).  
GGCONTROL PORT  
PS/2 Port  
Serial Port  
ADB Port  
6
8 7  
RXD  
––––––––  
––––––––  
GND  
RTS/CTS  
TXD  
––––––––  
ADB  
––––––––  
GND  
––––––––  
––––––––  
––––––––  
GND  
–––––––-  
CLK  
DATA  
1
2
3
4
5
6
7
8
GND  
––––––––  
––––––––  
GND  
GND  
GND  
3
5
4
2
1
––––––––  
NOTE: The RXD port (1 pin on the Serial Port) is provided on control port 2 connector only. If you control the projector by  
computer, you must connect control port 2 connector.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE PROJECTOR  
CONNECTING AN IBM-COMPATIBLE DESKTOP COMPUTER  
COMPUTER  
MONITOR CABLE  
(NOT PROVIDED)  
COMPUTER  
OUTPUT  
VGA CABLE  
(PROVIDED)  
PS/2 PORT  
INPUT  
AUDIO  
OUTPUT  
SERIAL PORT  
INPUT  
COMPUTER  
INPUT 1 or 2  
MONITOR  
OUTPUT  
MOUSE CABLE FOR  
PS/2 PORT  
(PROVIDED)  
MONITOR OUT  
COMPUTER IN 1  
COMPUTER IN 2  
CONTROL PORT  
OUTPUT 1 or 2  
CONTROL PORT 1  
CONTROL PORT 2  
EXT. SP (8Ω)  
(STEREO)  
AUDIO 1  
(STEREO)  
AUDIO 2  
(STEREO)  
MOUSE CABLE FOR  
SERIAL PORT  
(PROVIDED)  
COMPUTER  
AUDIO INPUT  
1 or 2  
R
AUDIO  
L
(MONO)  
Y
Cb/Pb  
Cr/Pr  
VIDEO  
S-VIDEO  
AUDIO CABLE  
(NOT PROVIDED)  
EXTERNAL AUDIO  
EQUIPMENT  
(Refer to page 18)  
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be  
disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE PROJECTOR  
CONNECTING AN IBM-COMPATIBLE LAPTOP COMPUTER  
COMPUTER  
COMPUTER  
OUTPUT  
VGA CABLE  
(PROVIDED)  
AUDIO  
OUTPUT  
PS/2 PORT  
INPUT  
SERIAL PORT  
INPUT  
COMPUTER  
INPUT 1 or 2  
MOUSE CABLE FOR  
PS/2 PORT  
(PROVIDED)  
MONITOR OUT  
CONTROL PORT  
OUTPUT 1 or 2  
COMPUTER IN 1  
COMPUTER IN 2  
CONTROL PORT 1  
CONTROL PORT 2  
EXT. SP (8Ω)  
(STEREO)  
AUDIO 1  
(STEREO)  
AUDIO 2  
(STEREO)  
MOUSE CABLE FOR  
SERIAL PORT  
(PROVIDED)  
R
AUDIO  
L
(MONO)  
Y
Cb/Pb  
Cr/Pr  
VIDEO  
S-VIDEO  
AUDIO CABLE  
(NOT PROVIDED)  
COMPUTER  
AUDIO INPUT  
1 or 2  
EXTERNAL AUDIO  
EQUIPMENT  
(Refer to page 18)  
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be  
disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE PROJECTOR  
CONNECTING A MACINTOSH DESKTOP COMPUTER  
COMPUTER  
MONITOR CABLE  
(NOT PROVIDED)  
COMPUTER  
OUTPUT  
VGA CABLE  
(PROVIDED)  
VGA/MAC ADAPTER  
(PROVIDED)  
AUDIO  
OUTPUT  
ADB PORT  
INPUT  
MONITOR  
OUTPUT  
COMPUTER  
INPUT 1 or 2  
MOUSE CABLE FOR  
ADB PORT  
(PROVIDED)  
MONITOR OUT  
COMPUTER IN 1  
COMPUTER IN 2  
CONTROL PORT 1  
CONTROL PORT 2  
EXT. SP (8Ω)  
(STEREO)  
AUDIO 1  
(STEREO)  
AUDIO 2  
(STEREO)  
CONTROL PORT  
OUTPUT 1 or 2  
R
AUDIO  
L
(MONO)  
Y
Cb/Pb  
Cr/Pr  
VIDEO  
S-VIDEO  
AUDIO CABLE  
(NOT PROVIDED)  
COMPUTER  
AUDIO INPUT  
1 or 2  
EXTERNAL AUDIO  
EQUIPMENT  
(Refer to page 18)  
Set the dip switches as shown in the table below depending on  
the RESOLUTION MODE that you want to use before you turn  
on the projector and computer.  
VGA/MAC ADAPTER  
SW1 ~ SW6  
ON  
RESOLUTION MODE  
SW3 SW4  
OFF OFF  
SW1 SW2  
SW5 SW6  
OFF OFF  
OFF OFF  
OFF OFF  
OFF OFF  
ON  
13" MODE (640  
16" MODE (832  
x
x
480)  
624)  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
1
2
3
4
5
6
OFF  
OFF  
ON  
ON  
OFF  
ON  
19" MODE (1024  
21" MODE (1152  
x
768)  
870)  
x
ON  
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be  
disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE PROJECTOR  
CONNECTING A MACINTOSH POWERBOOK COMPUTER  
NOTE: The Macintosh PowerBook requires the use of the PowerBook Video  
COMPUTER  
Adapter shipped with the PowerBook.  
TO POWERBOOK  
VIDEO ADAPTER  
VGA CABLE  
(PROVIDED)  
VGA/MAC ADAPTER  
(PROVIDED)  
COMPUTER  
INPUT 1 or 2  
AUDIO  
OUTPUT  
ADB PORT  
INPUT  
MOUSE CABLE FOR  
ADB PORT  
(PROVIDED)  
MONITOR OUT  
COMPUTER IN 1  
COMPUTER IN 2  
CONTROL PORT 1  
CONTROL PORT 2  
EXT. SP (8Ω)  
(STEREO)  
AUDIO 1  
(STEREO)  
AUDIO 2  
(STEREO)  
CONTROL PORT  
OUTPUT 1 or 2  
R
AUDIO  
L
(MONO)  
Y
Cb/Pb  
Cr/Pr  
VIDEO  
S-VIDEO  
AUDIO CABLE  
(NOT PROVIDED)  
COMPUTER  
AUDIO INPUT 1 or 2  
EXTERNAL AUDIO  
EQUIPMENT  
(Refer to page 18)  
Set the dip switches as shown in the table below depending on  
the RESOLUTION MODE that you want to use before you turn  
on the projector and computer.  
VGA/MAC ADAPTER  
SW1 ~ SW6  
ON  
RESOLUTION MODE  
SW3 SW4  
OFF OFF  
SW1 SW2  
SW5 SW6  
OFF OFF  
OFF OFF  
OFF OFF  
OFF OFF  
ON  
13" MODE (640  
16" MODE (832  
x
x
480)  
624)  
ON  
OFF  
OFF  
ON  
ON  
ON  
ON  
ON  
1
2
3
4
5
6
OFF  
OFF  
ON  
ON  
OFF  
ON  
19" MODE (1024  
21" MODE (1152  
x
768)  
870)  
x
ON  
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be  
disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE PROJECTOR  
CONNECTING THE VIDEO EQUIPMENT  
Connect to the video and audio outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other  
AV equipment.  
CONNECTING TO THE VIDEO INPUT JACK  
Connect the video output from the video equipment to this jack using the video cable.  
CONNECTING S-VHS VIDEO INPUT JACK  
Connect the S-VIDEO output from the video equipment to this jack using the S-video cable.  
The S-VIDEO jack has priority over the VIDEO (composite) jack.  
CONNECTING TO THE COMPONENT VIDEO INPUT JACKS  
Connect the component video outputs (Y, Cb/Pb, Cr/Pr) from the DVD player or other video equipment to these jacks  
using the video cable.  
The COMPONENT VIDEO jack has priority over the S-VIDEO and VIDEO (composite) jacks.  
CONNECTING TO THE AUDIO INPUT JACKS  
Connect the audio outputs from the video equipment to these jacks using the audio cable.  
When the audio output is monaural, connect it to the L (mono) jack.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE PROJECTOR  
CONNECTING THE VIDEO EQUIPMENT  
VIDEO EQUIPMENT  
Satellite  
TV Tuner  
Video Camera  
DVD Player  
Video Disc Player  
Video Cassette Recorder  
L
R
VIDEO  
OUTPUT  
AUDIO  
OUTPUT  
VIDEO INPUT  
MONITOR OUT  
COMPUTER IN 1  
COMPUTER IN 2  
CONTROL PORT 1  
CONTROL PORT 2  
S-VIDEO  
INPUT  
EXT. SP (8Ω)  
(STEREO)  
AUDIO 1  
(STEREO)  
AUDIO 2  
(STEREO)  
AUDIO INPUT  
R
AUDIO  
L
(MONO)  
Y
Cb/Pb  
Cr/Pr  
VIDEO  
S-VIDEO  
AUDIO  
INPUT  
AUDIO  
INPUT  
COMPONENT  
VIDEO INPUT  
R
L
Y, Cb/Pb, Cr/Pr  
COMPONENT  
VIDEO OUTPUT  
AUDIO  
OUTPUT  
S-VIDEO  
OUTPUT  
AUDIO  
OUTPUT  
DVD Player  
VCR Etc...  
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be  
disconnected from AC outlet. Turn the projector on before the peripheral equipment is switched on.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE PROJECTOR  
CONNECTING TO THE EXT. SP. JACK (3.5 mm mini stereo type)  
This jack outputs stereo speaker sound which viewing on screen. If you use external speaker system, connect stereo type  
external speaker jack. Internal speaker sound is disconnected when speaker jack is connected.  
MONITOR OUT  
COMPUTER IN 1  
COMPUTER IN 2  
CONTROL PORT 1  
CONTROL PORT 2  
EXT. SP (8Ω)  
(STEREO)  
AUDIO 1  
(STEREO)  
AUDIO 2  
(STEREO)  
R
AUDIO  
L
(MONO)  
Y
Cb/Pb  
Cr/Pr  
VIDEO  
S-VIDEO  
EXTERNAL  
SPEAKER SYSTEM  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
BEFORE OPERATION  
CONTROLS AND INDICATORS  
FRONT INDICATORS  
TOP CONTROLS  
FRONT INDICATORS  
LAMP  
LAMP  
WARNING  
READY  
REPLACE TEMP.  
1
2
3
4
TOP CONTROLS  
10  
5
ON-OFF  
MENU  
MODE  
9
ZOOM  
FOCUS  
VOLUME  
SELECT  
13  
AUTO IMAGE  
NORMAL  
11  
6
14  
12  
8
7
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
LAMP REPLACEMENT INDICATOR  
Light is orange when the Lamp life draws to an end.  
1
2
3
4
TEMPERATURE WARNING INDICATOR  
Flashes red when internal projector temperature is too high.  
READY INDICATOR  
Light is green when projector lamp is ready to be turned on.  
LAMP POWER INDICATOR  
Light is dim when the projector is on.  
Light is brightened when the projector is in stand-by mode.  
POWER ON/OFF BUTTON  
Used to turn the projector on or off.  
5
6
VOLUME BUTTONS  
Used to adjust volume.  
7 FOCUS BUTTONS  
Used to operate power focus system.  
ZOOM BUTTONS  
Used to operate power zoom lens.  
8
MODE BUTTON  
Used to select source.  
9
(Computer 1, Computer 2 or Video).  
MENU BUTTON  
This button will activate the MENU operation.  
10  
Use this button, the POINT UP/DOWN/LEFT/RIGHT buttons and the SELECT button to make adjustments to the  
projector's setting in MENU operation.  
11 AUTO IMAGE BUTTON  
Used to operate the AUTO IMAGE function.  
12  
NORMAL BUTTON  
Use to reset to normal picture adjustment preset by factory.  
13  
POINT UP/DOWN/LEFT/RIGHT BUTTONS  
To select an item on the MENU that you want to adjust. To select an item, move the arrow by pressing these buttons  
(UP, DOWN, LEFT or RIGHT).  
14  
SELECT BUTTON  
This button has different functions depending on when used. This button is used to execute the item selected, to  
increase or decrease the values in certain items such as CONTRAST or BRIGHTNESS.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
OPERATION OF THE REMOTE CONTROL  
This remote control unit is not only able to operate the projector but also usable  
INFRARED  
SIGNAL  
WINDOW  
as a wireless mouse for a PC. One pointing pad and two click buttons are used  
for wireless mouse operation.  
Wireless mouse is usable when PC mouse pointer is displayed on the screen.  
When the menu or indicator of the projector is displayed on the screen instead  
of the PC mouse pointer, the wireless mouse cannot be used.  
NOTE: To use the unit as a PC wireless mouse, connect the projector to the  
PC with the attached cable. Signals from the projector are transmitted  
to the PC, enabling the remote control unit of the projector to be used  
as a PC wireless mouse. (Refer to "CONNECTING THE PROJECTOR"  
in pages 11 to 15 for the connection).  
LASER LIGHT WINDOW  
LASER POINTER button  
This remote control emits a laser beam as the Laser Pointer  
from the Laser Light Window. When the LASER button is  
pressed, the laser light goes on. When the button is pressed  
more than 1 minute or the button is released, light goes off.  
Laser light is emitted with the RED light which tells the laser  
beam being emitted. The laser emitted is a class laser;  
therefore, do not look into the Laser Light Window or shine the  
laser beam on yourself or other people. The three marks to the  
right are the caution labels for the laser beam.  
CAUTION: Use of controls or adjustments or performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
2
FRONT  
ON-OFF  
COMPUTER VIDEO  
ZOOM FOCUS  
SIDE  
3
6
1
VOLUME  
20  
4
5
D.ZOOM  
MUTE  
MENU  
8
7
9
12  
10  
LASER  
11  
KEY STONE  
16  
18  
NO SHOW  
FREEZE  
LASER POINTER  
button  
13  
14  
15  
AUTO IMAGE  
NORMAL  
P-TIMER  
19  
17  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
COMPUTER SELECT BUTTON  
Used to select computer mode. (Computer 1 or Computer 2 Input)  
1
2
3
4
5
6
7
8
VIDEO SELECT BUTTON  
Used to select video mode.  
POWER ON/OFF BUTTON  
Used to turn the projector on or off.  
ZOOM BUTTONS  
Used to operate power zoom lens.  
FOCUS BUTTONS  
Used to operate power focus system.  
VOLUME BUTTONS  
Used to adjust volume.  
SOUND MUTE BUTTON  
Used to mute sound.  
DIGITAL ZOOM BUTTONS  
Used to operate digital zoom function.  
MENU BUTTON  
9
This button will activate the MENU operation. Use this button, the POINT UP/DOWN/LEFT/RIGHT button and the  
SELECT button to make adjustments to the projector's setting in MENU operation.  
POINTING PAD (POINT UP/DOWN/LEFT/RIGHT BUTTON)  
10  
When in use as a remote for the projector  
To select an item on the MENU that you want to adjust. To select an item, move the arrow by pressing the pad  
upward, downward, leftward or rightward. When pressing the center of this button, it works as the SELECT button.  
When in use as a wireless mouse  
Used to move the pointer. The pointer is moved according to the direction you are pressing.  
SELECT BUTTON  
11  
When in use as a remote for the projector.  
This button has different functions depending on when used. This button is used to execute the item selected, to  
increase or decrease the values in certain items such as CONTRAST or BRIGHTNESS.  
When in use as a wireless mouse  
This button has the same function as the left button in a PC mouse.  
12 FRONT CLICK BUTTON  
When in use as a remote for the projector  
Used to compress the image in D.ZOOM mode.  
When in use as a wireless mouse  
This button has the same function as the right button in a PC mouse.  
LASER BUTTON  
13  
Used to operate laser pointer function. The laser beam is emitted while pressing this button within 1 minute. When  
using the laser pointer for more than 1 minute, release the button and press it again.  
NO SHOW BUTTON  
Used to change the screen into black image.  
14  
KEYSTONE BUTTONS  
Used to revise the keystone distortion.  
15  
FREEZE BUTTON  
Used this button to freeze on-screen image.  
16  
AUTO IMAGE BUTTON  
Used to operate the AUTO IMAGE function.  
17  
NORMAL BUTTON  
Used to reset to normal picture adjustment preset by factory.  
18  
P-TIMER BUTTON  
Used to operate the P-TIMER function.  
19  
ALL-OFF SWITCH  
20  
Turn this switch to "ALL OFF" when the Remote Control is not used for extended period.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
Remote Control Battery Installation  
Remove the battery  
Slide the batteries into the  
compartment.  
Replace the compartment lid.  
1compartment lid.  
2
3
Note : For correct polarity (+ and -  
terminal), be sure the battery  
terminals are in contact with the  
pins in the compartment.  
Using the Remote Control Unit  
Point the remote control toward the projector (Receiver window) when pressing the buttons. Maximum operating range for  
the remote control is about 16.4' (5 m) and 60° front and rear of the projector.  
16.4'  
(5 m)  
16.4'  
(5 m)  
60°  
60°  
To insure safe operation, please observe the following precautions :  
G Use (2) AA, UM3 or R06 type alkaline batteries.  
G Change two batteries at the same time.  
G Do not use a new battery with a used battery.  
G Avoid contact with water.  
G Do not drop the remote control unit.  
G If batteries have leaked on the remote control, carefully wipe the case clean and load new  
batteries.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
CONTROL THE PROJECTOR  
The projector has two types of operation: DIRECT OPERATION and MENU OPERATION.  
DIRECT OPERATION allows you to operate the projector by using one button without showing the MENU.  
In MENU OPERATION mode, you display menus where you can adjust the projector's settings. Follow the instruction for  
each control.  
DIRECT OPERATION  
TOP CONTROL OF  
THE PROJECTOR  
ADJUST ITEM  
REMOTE CONTROL  
POWER ON-OFF  
POWER ON-OFF  
LAMP POWER ON/OFF  
MODE SELECT  
MODE  
COMPUTER  
VIDEO  
VOLUME (+) and ()  
SOUND VOLUME  
SOUND MUTE  
ZOOM  
VOLUME (+) and ()  
MUTE  
ZOOM (G) and (G)  
ZOOM (G) and (G)  
FOCUS (G) and (G)  
FOCUS (G) and (G)  
FOCUS  
D. ZOOM (G) and (G)  
KEYSTONE (G) and (G)  
NO SHOW  
DIGITAL ZOOM  
KEYSTONE  
NO SHOW  
FREEZE  
FREEZE PICTURE  
AUTO IMAGE  
NORMAL PICTURE  
P-TIMER  
AUTO IMAGE  
NORMAL  
AUTO IMAGE  
NORMAL  
P-TIMER  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
MENU OPERATION  
TOP CONTROL OF  
THE PROJECTOR  
ADJUST ITEM  
MODE SELECT  
REMOTE CONTROL  
MENU  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
POINT UP/DOWN  
SELECT  
1. COMPUTER/VIDEO MODE  
TOP CONTROL OF  
THE PROJECTOR  
ADJUST ITEM  
REMOTE CONTROL  
SOUND  
MENU  
MENU  
SOUND VOLUME  
SOUND MUTE  
POINT LEFT/RIGHT  
SELECT  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
POINT UP/DOWN  
SELECT  
LANGUAGE  
SETTING  
BLUE BACK  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
DISPLAY  
CEILING  
REAR  
SPLIT WIPE  
POWER MANAGEMENT  
REMOTE CONTROL  
LAMP AGE  
2. VIDEO MODE  
TOP CONTROL OF  
THE PROJECTOR  
REMOTE CONTROL  
ADJUST ITEM  
COLOR SYSTEM  
MENU  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
VIDEO SOURCE  
PICTURE IMAGE  
COLOR  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
TINT  
WHITE BALANCE  
CONTRAST  
BRIGHTNESS  
SHARPNESS  
PICTURE SCREEN  
WIDE  
REGULAR  
KEYSTONE  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
3. COMPUTER MODE  
ADJUST ITEM  
TOP CONTROL OF  
THE PROJECTOR  
REMOTE CONTROL  
MENU  
MENU  
COMPUTER SYSTEM  
POINT LEFT/RIGHT  
SELECT  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
POINT UP/DOWN  
SELECT  
AUTO IMAGE  
FINE SYNC  
TOTAL DOTS  
POSITION  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
PICTURE IMAGE  
FINE SYNC  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
TOTAL DOTS  
WHITE BALANCE  
CONTRAST  
BRIGHTNESS  
PICTURE POSITION  
PC ADJUSTMENT  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT LEFT/RIGHT/UP/DOWN  
SELECT  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT LEFT/RIGHT/UP/DOWN  
SELECT  
MENU  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
POINT UP/DOWN  
SELECT  
PICTURE SCREEN  
TRUE  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
MENU  
POINT LEFT/RIGHT  
SELECT  
POINT UP/DOWN  
SELECT  
DIGITAL ZOOM  
KEYSTONE  
POINT LEFT/RIGHT/UP/DOWN  
SELECT  
FRONT CLICK  
POINT LEFT/RIGHT/UP/DOWN  
NOTES :  
1. If you switch to DIRECT operation by pressing a DIRECT operation button while in MENU mode, the menus will  
disappear and the MENU operation will end.  
2. You can use the REMOTE CONTROL UNIT or the TOP CONTROL OF THE PROJECTOR to operate the MENU  
operation.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
TURNING ON/OFF THE PROJECTOR  
TO TURN ON THE PROJECTOR  
Connect the projector to a source (Computer, VCR, Video Camera, Video Disc Player, etc.) using the appropriate  
terminals on the rear of the projector. (See "CONNECTING THE PROJECTOR" section on pages 11-18).  
Connect the projector's AC power cord into a wall outlet and turn the MAIN ON/OFF switch (located on the rear of the  
projector) to the ON position. The LAMP POWER indicator will light RED, the READY indicator will light GREEN.  
Press the POWER ON/OFF button on the remote control unit or on the projector to  
ON. The LAMP POWER indicator light will dim and the cooling fans will operate. The  
wait display appears on the screen and the count-down starts (30-29-28-...1). The  
signal from the source appears after 30 seconds.  
30  
CAUTION:  
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU HAVE TURNED IT ON, WAIT AT LEAST 5 MINUTES  
BEFORE TURNING IT OFF.  
NOTE: TEMPERATURE WARNING INDICATOR flashes red, the projector will automatically turn off.  
Wait at least 5 minutes before turning the projector on.  
If the TEMPERATURE WARNING INDICATOR continued to flash, follow the procedures below:  
(1). Press POWER ON/OFF button to OFF.  
(2). Check the air filter for dust accumulation.  
(3). Remove dust with vacuum cleaner. (See "AIR FILTER CARE AND CLEANING" section on page 49).  
(4). Press POWER ON/OFF button to ON.  
If the TEMPERATURE WARNING INDICATOR still continues to flash, call Boxlight Corporation at 1-800-762-5757  
or 360-779-7901.  
TO TURN OFF THE PROJECTOR  
Press the POWER ON/OFF button on the remote control unit or on the projector.  
The "Power off ?'' appears on the screen. Press again the POWER ON/OFF button  
to turn OFF the projector. The LAMP POWER indicator will light bright and READY  
indicator will turn off. The cooling fans will operate for approximate 2 minutes after  
the projector is turned off. (During this "cooling down" period, the projector cannot be  
turned on). The READY indicator will light green again and the projector may be  
turned on by pressing the POWER ON/OFF button. To power down completely, turn  
the MAIN ON/OFF switch (located on the rear of the projector) to the OFF position.  
DIRECT OPERATION  
MODE button  
COMPUTER button  
Computer 1  
MODE SELECT  
Computer 1  
Press the MODE button on the projector or the COMPUTER and  
VIDEO button on the remote control unit to select Computer 1,  
Computer 2, Video Input. The "Computer 1", "Computer 2" or "Video"  
display will appear on the screen for a few seconds.  
Computer 2  
VIDEO button  
Video  
Computer 2  
Video  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
SOUND VOLUME ADJUSTMENT  
Press the VOLUME buttons on the remote control unit or on the projector to adjust  
the volume. The volume display will be displayed on the screen for a few seconds.  
Pressing volume (+) will increase volume and increase the number on the screen.  
Pressing volume (-) will decrease volume and decrease the number on the screen.  
SOUND MUTE FUNCTION  
Pressing the MUTE button on the remote control unit will mute audio. Press the  
MUTE button again to restore audio to its previous level. The mute display will be  
displayed on the screen for a few seconds.  
ZOOM ADJUSTMENT  
Press the ZOOM (G) or (G) button on the remote control unit or on the projector to  
obtain your desired picture size. For a larger picture, press (G) and for a smaller  
picture, press (G).  
FOCUS ADJUSTMENT  
Press the FOCUS (G) or (G) button on the remote control unit or on the projector for  
a sharper, crisper picture.  
DIGITAL ZOOM FUNCTION  
Press the D. ZOOM (G) or (G) button on the remote control unit. The "D. Zoom" and  
the magnifying-glass icon is displayed to indicate Digital zoom mode. Digital zoom  
mode can be adjust the image size or pan the image.  
To expand the image size, press D. ZOOM (G). The image is magnified by degrees  
(Expand function).  
D. Zoom  
To compress the image size, press D. ZOOM (G) button. The size of image is  
reduced by degrees (Compress function).  
To pan the image, press POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) button.  
The image move to the direction indicated (Panning function).  
See page 45 for more detail.  
KEYSTONE FUNCTION  
If the picture have keystone distortion, correct screen with KEYSTONE adjustment.  
Press the KEYSTONE (G) or (G) button on the remote control unit or select the  
Keystone on the SCREEN menu. (See pages 35 and 45). The "Keystone" is  
displayed to indicate Keystone mode.  
Press the KEYSTONE (G) button or the POINT UP button to reduce the upper part  
of the image, and the KEYSTONE (G) button or the POINT DOWN button to  
reduce the lower part.  
Press the NORMAL button in keystone mode, the image changed to the original  
image (not correct keystone distortion).  
Keystone  
The message disappears  
after 4 seconds.  
Reduce the upper width with the KEYSTONE  
(G) button or the POINT UP button.  
Reduce the lower width with the KEYSTONE  
(G) button or the POINT DOWN button.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
NO SHOW FUNCTION  
Press the NO SHOW button on the remote control unit. The screen will change into  
black image and the "NO SHOW" is displayed on the screen for a few seconds.  
This function is cancelled when the NO SHOW button is pressed again or any other  
function button is pressed.  
FREEZE PICTURE FUNCTION  
Press the FREEZE button on the remote control unit to freeze the picture on screen. This function is cancelled when the  
FREEZE button is pressed again or any other button is pressed.  
NOTE: Your computer or video equipment is not affected by this function, and will continue to run.  
AUTO IMAGE FUNCTION  
Press the AUTO IMAGE button on the remote control unit or on the projector. The item(s) indicated "ON" in the AUTO  
IMAGE FUNCTION are adjusted automatically.  
If all the items in AUTO IMAGE FUNCTION are "OFF", AUTO IMAGE SETTING display appears. If you wish to operate  
the AUTO IMAGE FUNCTION, perform the steps 3 - 9 of "AUTO IMAGE FUNCTION" section on page 38.  
NORMAL PICTURE FUNCTION  
The normal picture image level is factory preset on the projector and can be  
restored anytime by pressing the NORMAL button on the remote control unit or on  
the projector. The "Normal" display will be displayed on the screen for a few  
seconds.  
P-TIMER FUNCTION  
Press the P-TIMER button on the remote control unit. The timer display "00:00" appears on  
the screen and the timer starts to count the time (00:00 to 59:59).  
Press again the P-TIMER button to stop the timer. Then press the P-TIMER button to  
cancel the P-TIMER function.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
MENU OPERATION  
In MENU OPERATION mode, you display menus where you can adjust the projector's settings. You can use the TOP  
CONTROL OF THE PROJECTOR or the REMOTE CONTROL UNIT.  
REMOTE CONTROL UNIT  
TOP CONTROL OF  
THE PROJECTOR  
POINT UP  
BUTTON  
ON-OFF  
COMPUTER VIDEO  
ZOOM FOCUS  
VOLUME  
MENU  
BUTTON  
MENU  
MODE  
D.ZOOM  
MUTE  
MENU  
POINT LEFT  
BUTTON  
POINT RIGHT  
BUTTON  
SELECT  
MENU  
BUTTON  
LASER  
KEY STONE  
NO SHOW  
FREEZE  
AUTO IMAGE  
NORMAL  
AUTO IMAGE  
NORMAL  
SELECT  
BUTTON  
P-TIMER  
POINT DOWN  
BUTTON  
SELECT  
BUTTON  
POINT (UP/DOWN/LEFT/RIGHT) BUTTON  
Pressing the button upward, downward,  
leftward or rightward.  
MODE SELECT  
You can select a mode from MAIN MENU display among computer 1, computer 2 and video.  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select Computer or Video and press the SELECT BUTTON. Another  
dialog box MODE DISPLAY will appear.  
3. Press the POINT DOWN BUTTON and a red arrow will appear.  
4. Move the arrow to the mode you want (computer 1, computer 2 or video) to use by pressing the POINT UP/DOWN  
BUTTON(s) and then press the SELECT BUTTON.  
MAIN MENU DISPLAY  
Auto  
MODE DISPLAY  
MAIN MENU DISPLAY  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
SOUND ADJUSTMENT  
You can adjust the sound volume and sound mute ON/OFF switch in the MENU display.  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select SOUND and press the SELECT BUTTON. Another dialog box  
SOUND ADJUST DISPLAY will appear.  
3. Press the POINT DOWN BUTTON and a red arrow will appear.  
4. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).  
5. To increase the sound volume, point the arrow to G and then press the SELECT BUTTON. To decrease the sound  
volume, point the arrow to G and then press the SELECT BUTTON.  
6. To mute the sound, point the arrow to Mute and then press the SELECT BUTTON. The display is changed On and  
mute the sound.  
7. To quit the MENU, point to Quit and then press the SELECT BUTTON.  
MAIN MENU DISPLAY  
Auto  
SOUND ADJUST  
DISPLAY  
LANGUAGE ADJUSTMENT  
A language in the MENU display can be selected among English, German, French, Italian, Spanish and Japanese.  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select LANGUAGE and press the SELECT BUTTON. Another dialog  
box LANGUAGE SETTING DISPLAY will appear.  
3. Press the POINT DOWN BUTTON and a red arrow will appear.  
4. Move the arrow to the language you want to use by pressing the POINT UP/DOWN BUTTON(s) and then press the  
SELECT BUTTON .  
MAIN MENU DISPLAY  
Auto  
LANGUAGE  
SETTING DISPLAY  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO MODE  
COLOR SYSTEM SELECT  
This projector is compatible with the six major broadcast video standards: PAL, SECAM, NTSC, NTSC 4.43, PAL-M  
and PAL-N (COLOR SYSTEMs). When the color system is set to "Auto position", this projector can detect one of 4  
systems (PAL, SECAM, NTSC or NTSC 4.43) automatically. However, if the video signal is not strong enough to detect  
the video format, the projector may not reproduce the proper video image. In case this happens, this projector allows  
you to choose a specific broadcast signal format.  
1. Connect the video equipment to the PROJECTOR and turn the projector on first.  
2. Set MODE SELECT to "VIDEO MODE".  
3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
4. Press the POINT LEFT/RIGHT BUTTON(s) to select SYSTEM and press the SELECT BUTTON. Another dialog box  
COLOR SYSTEM DISPLAY will appear. The current COLOR SYSTEM is displayed in the system window.  
5. Press the POINT DOWN BUTTON and a red arrow will appear.  
6. To change the current COLOR SYSTEM, press the POINT UP/DOWN BUTTON(s) to move the arrow to a desirable  
system and then press the SELECT BUTTON.  
MAIN MENU DISPLAY  
Auto  
COLOR SYSTEM  
DISPLAY  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO MODE  
VIDEO SOURCE SELECT  
This projector is compatible with 4 types video source input: Composite Video, S-Video, Component Video (Y, Cb, Cr)  
and Component Video (Y, Pb, Pr).  
When the video source is set to "Auto" position this projector can detect one of 3 types Composite Video, S-Video and  
Component Video (Y, Cb,Cr) automatically. However, if the input video source is Component Video (Y, Pb, Pr), the  
projector may not detect the video source.  
1. Connect the video equipment to the PROJECTOR and turn the projector on first.  
2. Set MODE SELECT to "VIDEO MODE".  
3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
4. Press the POINT LEFT/RIGHT BUTTON(s) to select VIDEO SOURCE and press the SELECT BUTTON. Another  
dialog box VIDEO SOURCE DISPLAY will appear. The current VIDEO SOURCE is displayed in the window.  
5. Press the POINT DOWN BUTTON and a red arrow will appear.  
6. To change the current VIDEO SOURCE, press the POINT UP/DOWN BUTTON(s) to move the arrow to a desirable  
video source and then press the SELECT BUTTON.  
MAIN MENU DISPLAY  
VIDEO SOURCE  
DISPLAY  
COMPONENT VIDEO SYSTEM SELECT  
When you select the "Y, Pb, Pr" by video source select. You must select the component video system (1080i, 1035i,  
720p, 575p, 480p).  
1. Press the POINT LEFT/RIGHT BUTTON(s) to select SYSTEM and press the SELECT BUTTON. Another dialog box  
COMPONENT VIDEO SYSTEM DISPLAY will appear. The current SYSTEM is displayed in the system window.  
2. Press the POINT DOWN BUTTON and a red arrow will appear.  
3. To change the current SYSTEM, press the POINT UP/DOWN BUTTON(s) to move the arrow to a desirable system  
and then press the SELECT BUTTON.  
MAIN MENU DISPLAY  
COMPONENT VIDEO  
SYSTEM DISPLAY  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO MODE  
PICTURE IMAGE ADJUSTMENT  
Picture adjustments have been preset at the factory. If you want to change the setting, operate the projector as follows.  
1. Press MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and press the SELECT BUTTON. Another dialog box  
IMAGE ADJUST DISPLAY will appear. This shows the current picture settings.  
3. In this dialog box, you can adjust the settings by increasing or decreasing the levels shown as numbers. The items and  
the range of the levels that you can adjust are summarized in the table below.  
4. Press the POINT DOWN BUTTON and a red arrow will appear.  
5. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).  
6. To increase the level, point the arrow to G and then press the SELECT BUTTON. To decrease the level, point the  
arrow to G and then press the SELECT BUTTON.  
7. You may want to store the settings in the memory so that you can recall them later. To store the settings, move the  
arrow to Stored and then press the SELECT BUTTON. When you have stored the settings, "OK ?" is displayed for  
confirmation.  
8. Move the arrow to Yes and then press the SELECT BUTTON. The stored settings are memorized even if the MAIN  
ON/OFF is switched off.  
9. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.  
10.If you do not want to store the settings, move the arrow to Quit and then press the SELECT BUTTON. The settings  
changed remains effective until the MAIN ON/OFF switch is turned off.  
11.To recall the settings from the memory that you have stored, move the arrow to Reset and then press the SELECT  
BUTTON. When you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then  
press the SELECT BUTTON. You can adjust the settings again if needed.  
NOTE : "TINT" will be skipped in the PAL, SECAM, PAL-M and PAL-N mode.  
MAIN MENU DISPLAY  
Auto  
IMAGE  
ADJUST DISPLAY  
TABLE OF PICTURE IMAGE ADJUSTMENT  
INCREASES  
MORE GREEN  
INCREASES  
DEEPER  
DECREASES  
MORE PURPLE  
DECREASES  
LIGHTER  
63  
63  
63  
63  
63  
31  
COLOR  
0
0
0
0
0
0
TINT  
WHITE BALANCE (R/G/B)  
CONTRAST  
BRIGHTNESS  
SHARPNESS  
DARKER  
BRIGHTER  
SOFTER  
SHARPER  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO MODE  
PICTURE SCREEN ADJUSTMENT  
This projector has a picture screen resize function, which enables you to display the image in desirable size.  
WIDE function  
This projector is able to project not only a normal video image (with 4 x 3 aspect ratio), but also a wider video image by  
compressing 4 x 3 image. This feature enable you to enjoy watching pictures like cinema images. You can switch either  
to WIDE or to REGULAR screen mode.  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select SCREEN and press the SELECT BUTTON.  
Another dialog box SCREEN ADJUST DISPLAY will appear.  
3. Press the POINT DOWN BUTTON and a red arrow will appear.  
4. To switch to "Wide" mode, move the arrow to Wide by pressing the POINT UP/DOWN BUTTON(s) and then press the  
SELECT BUTTON.  
5. To switch to "Regular" mode, move the arrow to Regular by pressing the POINT UP/DOWN BUTTON(s) and then  
press the SELECT BUTTON.  
6. When the image is distorted vertically, move the arrow to Keystone by pressing POINT UP/DOWN BUTTON(s) and  
then press SELECT BUTTON. The "Keystone" is displayed to indicate Keystone mode.  
7. Press the POINT UP BUTTON to reduce the upper part of the image, and the POINT DOWN BUTTON to reduce the  
lower part. (See "KEYSTONE FUNCTION" section on page 28).  
8. Press the NORMAL BUTTON in keystone mode, the image changed to original image (not correct keystone  
distortion).  
NOTE: The "WIDE" function cannot be operated when "Y, Pb, Pr" is selected on the VIDEO SOURCE SELECT menu.  
(See page 33).  
MAIN MENU DISPLAY  
Auto  
SCREEN ADJUST  
DISPLAY  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
COMPUTER SYSTEM SELECT  
This projector is adjustable to different types of computer display signals based on VGA, SVGA, XGA or SXGA (See  
"COMPATIBLE COMPUTER SPECIFICATIONS" on the next page). If you set MODE SELECT to "COMPUTER", the  
projector will automatically process the incoming signal and projects the proper image without any special setting.  
Although this will work in most cases, you may be required to manually set the projector for some computer signals. If the  
computer image is not reproduced properly, try the following procedure and switch to the computer display mode that you  
want to use.  
1. Connect the COMPUTER to the PROJECTOR and turn the projector on first.  
2. Set MODE SELECT to "COMPUTER MODE (1 or 2)". This shows the current display mode initially detected by the  
projector in the system window. And "Current mode" display appears.  
NOTE : 1. If the projector cannot discriminate or detect the input signal from the computer, the "Go PC adj." display  
appears.  
NOTE : 2. If no input signal from the computer, the "No signal" display appears.  
3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
4. Press the POINT LEFT/RIGHT BUTTON(s) to select SYSTEM and press the SELECT BUTTON. Another dialog box  
COMPUTER SYSTEM DISPLAY will appear.  
5. Press the POINT DOWN BUTTON and a red arrow will appear.  
6. If you want to change the current display mode, move the arrow by pressing the POINT UP/DOWN BUTTON(s) to  
select one of the modes.  
7. Press the SELECT BUTTON to change the display mode.  
8. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.  
MAIN MENU DISPLAY  
XGA 1  
X
COMPUTER  
SYSTEM  
DISPLAY  
X
X
X
X
X
X
X
X
X
X
CURRENT MODE  
DISPLAY  
When the mark ( ) is displayed as BLACK, computer  
system mode will be available on the next page. Move  
an arrow to the mark (  
) and press the SELECT  
BUTTON to show computer system mode described on  
the next page.  
PC ADJUSTMENT  
This is a special function that may be used when a computer image is not reproduced properly. (See pages 41 ~ 44 for  
more detail).  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
COMPATIBLE COMPUTER SPECIFICATIONS  
ON-SCREEN  
DISPLAY  
H-Freq.  
(kHz)  
V-Freq.  
(Hz)  
ON-SCREEN  
DISPLAY  
H-Freq.  
(kHz)  
V-Freq.  
(Hz)  
RESOLUTION  
RESOLUTION  
1024 x 768  
640 x 480  
720 x 400  
640 x 400  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
31.47  
31.47  
31.47  
37.86  
37.86  
37.50  
43.269  
34.97  
35.00  
15.625  
XGA12  
86.96  
(Interlace)  
59.88  
70.09  
70.09  
74.38  
72.81  
75.00  
85.00  
66.60  
66.67  
VGA1  
VGA2  
VGA3  
VGA4  
VGA5  
VGA6  
VGA7  
Mac LC13  
Mac13  
RGB  
35.522  
XGA13  
XGA14  
XGA15  
Mac19  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 960  
1152 x 900  
1152 x 900  
1280 x 1024  
58.20  
58.30  
72.00  
75.08  
70.40  
58.60  
60.00  
59.98  
60.01  
67.19  
76.107  
60.02  
75.025  
60.00  
65.20  
75.60  
46.90  
47.00  
58.03  
60.24  
64.20  
62.50  
63.90  
63.34  
63.74  
71.69  
81.13  
63.98  
79.976  
60.00  
61.20  
71.40  
50.00  
SXGA1  
SXGA2  
SXGA3  
SXGA4  
SXGA5  
SXGA6  
SXGA7  
SXGA8  
SXGA9  
SXGA10  
SXGA11  
SXGA12  
SXGA13  
50.00  
(Interlace)  
15.734  
RGB  
60.00  
(Interlace)  
56.25  
60.32  
75.00  
85.06  
72.19  
61.03  
55.38  
60.51  
60.31  
51.09  
60.51  
74.55  
60.00  
84.997  
75.03  
70.07  
74.92  
60.02  
54.58  
79.35  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
832 x 624  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
35.156  
37.88  
46.875  
53.674  
48.08  
37.90  
34.50  
38.00  
38.60  
32.70  
38.00  
49.72  
48.36  
68.677  
60.023  
56.47  
60.31  
48.50  
44.00  
63.48  
36.00  
SVGA1  
SVGA2  
SVGA3  
SVGA4  
SVGA5  
SVGA6  
SVGA7  
SVGA8  
SVGA9  
SVGA10  
SVGA11  
Mac16  
XGA1  
86.00  
(Interlace)  
SXGA14  
1280 x 1024  
94.00  
(Interlace)  
50.00  
SXGA15  
SXGA16  
SXGA17  
SXGA18  
1280 x 1024  
1280 x 1024  
1152 x 900  
1280 x 1024  
60.01  
72.00  
66.00  
63.37  
76.97  
61.85  
46.43  
86.70  
(Interlace)  
XGA2  
SXGA19  
SXGA20  
Mac21  
1280 x 1024  
1280 x 1024  
1152 x 870  
1280 x 960  
1280 x 1024  
60.18  
85.024  
75.06  
75.08  
75.08  
60.00  
63.79  
91.146  
68.68  
75.00  
80.00  
45.00  
33.75  
XGA3  
XGA4  
XGA5  
Mac  
XGA6  
Mac  
XGA7  
HDTV720p  
HDTV1035i  
XGA8  
60.00  
87.17  
(Interlace)  
(Interlace)  
XGA9  
HDTV1080i  
33.75  
60.00  
77.07  
75.70  
1024 x 768  
1024 x 768  
62.04  
61.00  
(Interlace)  
XGA10  
XGA11  
Specifications are subject to change without notice.  
NOTE: Basically this projector can accept the signal from all computers with the above mentioned V, H-Frequency and  
less than 165 MHz of Dot Clock.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
AUTO IMAGE FUNCTION  
The Auto image function is provided to automatically adjust Fine sync., Total dots and Screen position for most  
computers.  
NOTE: This AUTO IMAGE function cannot be operated when "RGB", "HDTV1035i" or "HDTV1080i" is selected on the  
COMPUTER SYSTEM SELECT menu. (See pages 36 ~ 37).  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select AUTO IMAGE and press the SELECT BUTTON. Another dialog  
box AUTO IMAGE SETTING DISPLAY will appear.  
3. Press the POINT DOWN BUTTON and a red arrow will appear.  
4. Move the arrow to an item(s) you want to adjust by pressing the POINT UP/DOWN BUTTON(s).  
5. Change the setting "On" , press the SELECT BUTTON.  
6. Move the arrow by pressing the POINT UP/DOWN BUTTON(s) to select "Go!" and then press the SELECT BUTTON.  
The auto image function is started now. It will take about 10 seconds.  
7. To store the settings, move the arrow to Stored and then press the SELECT BUTTON. When you have stored the  
settings, "OK?" is displayed for confirmation.  
8. Move the arrow to "Yes" and then press the SELECT BUTTON. The stored settings are memorized even if the MAIN  
ON/OFF is switched off.  
9. To quit the MENU, point to Quit and then press the SELECT BUTTON.  
10.This setting is temporarily effective until you turn off the projector or change the input signal.  
NOTE: The fine sync., total dots and screen position of some computers may not be fully adjusted with the "Auto Image  
Function." In that case, use the "Picture Image" and/or "Picture Position" adjustments (see pages 39 ~ 40) to  
make fine-adjust them after the "Auto Image Function" is executed.  
MAIN MENU DISPLAY  
AUTO IMAGE SETTING  
DISPLAY  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
PICTURE IMAGE ADJUSTMENT  
Picture adjustments have been preset at the factory. If you want to change the setting, operate the projector as follows.  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and press the SELECT BUTTON. Another dialog box  
IMAGE ADJUST DISPLAY will appear. This shows the current picture settings.  
3. In this dialog box, you can adjust the settings by increasing or decreasing the levels shown as numbers. The items  
and the range of the levels that you can adjust are summarized in the table below.  
4. Press the POINT DOWN BUTTON and a red arrow will appear.  
5. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).  
6. To increase the level, point the arrow to G and then press the SELECT BUTTON. To decrease the level, point the  
arrow to G and then press the SELECT BUTTON.  
7. You may want to store the settings in the memory so that you can recall them later. To store the settings, move the  
arrow to Stored and then press the SELECT BUTTON. When you have stored the settings, "OK ?" is displayed for  
confirmation.  
8. Move the arrow to Yes and then press the SELECT BUTTON. The stored settings are memorized even if the MAIN  
ON/OFF is switched off.  
9. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.  
10.If you do not want to store the settings, move the arrow to Quit and then press the SELECT BUTTON. The settings  
changed remains effective until the MAIN ON/OFF switch is turned off.  
11.To recall the settings from the memory that you have stored, move the arrow to Reset and then press the SELECT  
BUTTON. When you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then  
press the SELECT BUTTON. You can adjust the settings again if needed.  
NOTE: The "Fine sync." and "Total dots" cannot be fully adjusted when "RGB", "HDTV1035i" or "HDTV1080i" is  
selected on the COMPUTER SYSTEM SELECT menu. (See pages 36 ~ 37).  
MAIN MENU DISPLAY  
IMAGE ADJUST  
DISPLAY  
NOTE:  
The projector may not reproduce a proper  
image for some SXGA signals.  
Since SXGA (1280 x 1024) image is  
converted to 960 x 768 image by partial scan,  
some lines and dots of the image do not  
appear.  
Some video noise of flicker on this  
compressed SXGA image cannot be  
eliminated even though you try to make a  
Fine sync adjustment.  
TABLE OF PICTURE IMAGE ADJUSTMENT  
Adjust the picture as necessary to eliminate  
FINE SYNC  
127  
0
flicker from the display.  
The number of the total dots in one horizontal period. Adjust the  
number to match your PC image.  
TOTAL DOTS  
INCREASE  
DEEPER  
WHITE BALANCE (R/G/B)  
CONTRAST  
DECREASE  
LIGHTER  
63  
63  
63  
0
0
0
BRIGHTNESS  
BRIGHTER  
DARKER  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
PICTURE POSITION ADJUSTMENT  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select POSITION and press the SELECT BUTTON. Another dialog box  
POSITION SETTING DISPLAY will appear.  
3. Press the POINT DOWN BUTTON and a red arrow will appear.  
4. Move the arrow to a desirable direction (  
,
,
or  
) by pressing the POINT LEFT/RIGHT/UP/DOWN  
BUTTON(s) and press the SELECT BUTTON to a desirable picture position.  
5. You may want to store the settings to the memory so that you can recall them later. To store the settings, move the  
arrow to Stored and then press the SELECT BUTTON. When you have stored the settings, "OK ?" is displayed for  
confirmation.  
6. Move the arrow to Yes and then press the SELECT BUTTON. The stored settings are memorized even if the MAIN  
ON/OFF is switched off.  
7. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.  
8. If you do not want to store the settings, move the arrow to Quit and then press the SELECT BUTTON. The settings  
changed remains effective until the MAIN ON/OFF switch is turned off.  
9. To recall the settings from the memory that you have stored, move the arrow to Reset and then press the SELECT  
BUTTON. When you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then  
press the SELECT BUTTON. You can adjust the settings again if needed.  
MAIN MENU DISPLAY  
POSITION SETTING  
DISPLAY  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
PC ADJUSTMENT  
This projector can automatically detect display signals from most personal computers currently distributed. However,  
some computers employ a special signal format which is different from the standard one and the projector cannot detect  
it. If this happens, the projector cannot reproduce a proper image. And a flickering picture, a non-synchronized picture, a  
non-centered picture or a skewed picture may be projected instead.  
For those non-standard formats, this projector is provided with PC ADJUST, enabling you to precisely adjust several  
parameters to match with the input signal format. The projector has eight independent memory areas where you can  
store the parameter you have set. This enables you to recall the setting for a specific computer when you need it.  
NOTE: This PC ADJUSTMENT function cannot be operated when "RGB", "HDTV1035i" or "HDTV1080i" is selected on  
the COMPUTER SYSTEM SELECT menu. (See pages 36 ~ 37).  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select PC ADJUST and press the SELECT BUTTON. Another dialog  
box "Where to reserve" will appear.  
3. In this dialog box, you will select one of the memory areas from among "Mode 1" to "Mode 8". If parameters have  
been previously set and stored in the memory, the status "Stored" will appear on the corresponding row. If not, "Free"  
will appear.  
4. Press the POINT DOWN BUTTON and a red arrow will appear.  
5. Move the arrow to one of the "Modes" (Free position) where you want to store the parameters by pressing the POINT  
UP/DOWN BUTTON(s). Press the SELECT BUTTON to select it.  
NOTE : If "Stored" appears in all Modes, no new PC parameter data can be stored. In this case, clear the PC parameter  
data using Mode free Function. (See page 44).  
Continued to the next page.  
MAIN MENU DISPLAY  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
6. Another dialog box "PC ADJUSTMENT DISPLAY 1" will appear and the parameter data for the Mode you have  
selected is shown in this dialog box.  
7. The parameters will be filled with the data determined by the projector according to the present signal input.  
8. The function of the parameters and their values are summarized in the table as below.  
9. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).  
10.To increase the level, point the arrow to G and then press the SELECT BUTTON. To decrease the level, point the  
arrow to G and then press the SELECT BUTTON.  
11.If you want to store the settings in the memory, move the arrow to Stored and press the SELECT BUTTON. When you  
have stored the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press the SELECT  
BUTTON.  
12.To recall the parameter data before setting, move the arrow to Reset and then press the SELECT BUTTON. When  
you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press the SELECT  
BUTTON. You can adjust the settings again if needed.  
13.To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.  
14.If you quit the MENU without storing the settings in the memory, the parameter data you changed will not be kept.  
15.The stored settings are memorized even if the MAIN ON/OFF is switched off.  
16.Adjust the data such as a "Clamp", "Fine sync", "Display area", "Horiz. scale" and "Vert. scale" if needed, move the  
arrow by pressing the POINT UP/DOWN BUTTON(s) to select (G). Press the SELECT BUTTON.  
Continued to the next page.  
MAIN MENU DISPLAY  
1
PC ADJUSTMENT  
630  
DISPLAY 1  
1056  
47  
4
OK ?  
Yes  
No  
ITEM  
FUNCTION  
The number of the total vertical lines. Adjust the number to match your PC image.  
The number of the total dots in one horizontal period. Adjust the number to match your PC image.  
Adjustment of the horizontal picture position. When the image is not centered on the screen, adjust this.  
Adjustment of the vertical picture position. When the image is not centered on the screen, adjust this.  
TOTAL LINES  
TOTAL DOTS  
HORIZONTAL  
VERTICAL  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
17. Another dialog box "PC ADJUSTMENT DISPLAY 2" will appear and the parameter data for the Mode you have selected  
is shown in this dialog box.  
18. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).  
19. To increase the level, point the arrow to G and then press the SELECT BUTTON. To decrease the level, point the  
arrow to G and then press the SELECT BUTTON.  
20. If you want to store the settings in the memory, move the arrow to Stored and press the SELECT BUTTON. When you  
have stored the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press the SELECT  
BUTTON.  
21. To recall the parameter data before setting, move the arrow to Reset and then press the SELECT BUTTON. When you  
have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press the SELECT  
BUTTON. You can adjust the settings again if needed.  
22. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.  
23. If you quit the MENU without storing the settings in the memory, the parameter data you changed will not be kept.  
24. The stored settings are memorized even if the MAIN ON/OFF is switched off.  
MAIN MENU DISPLAY  
1
630  
NOTE: The "Display area", "Horiz. scale" and " Vert. scale"  
1056  
cannot be adjusted when "HDTV1035i" or  
"HDTV1080i" is selected on the COMPUTER  
SYSTEM SELECT menu. (See pages 36 ~ 37).  
47  
4
1. To adjust the display area, move the  
300  
0
640 X 480  
arrow by pressing the POINT  
720 X 400  
UP/DOWN BUTTON(s) to select (  
and press the SELECT BUTTON.  
)
PC ADJUSTMENT  
DISPLAY 2  
800 X 600  
2. Another dialog box "DISPLAY AREA  
DISPLAY" will appear.  
1024 X 768  
1152 X 864  
1280 X 1024  
3. Move the arrow to an item that you  
want to select display area by pressing  
the POINT UP/DOWN BUTTON(s)  
and press the SELECT BUTTON.  
Selected mode data will be displayed  
in H, V box.  
4. To close dialog, move the arrow to  
"Quit" and press the SELECT  
BUTTON.  
FUNCTION  
ITEM  
Adjustment of the clamp level. When the image has a dark bar, try this adjustment.  
Adjust the picture as necessary to eliminate flicker from the display.  
Adjustment the display area to match your PC.  
CLAMP  
FINE SYNC  
DISPLAY AREA  
HORIZ. SCALE  
VERT. SCALE  
Expanding or compressing level for the horizontal direction.  
Expanding or compressing level for the vertical direction.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
MODE FREE  
The Mode free function is provided to confirm or clear the parameter data produced by PC ADJUST.  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select PC ADJUST and press the SELECT BUTTON. Another dialog  
box "Where to reserve" will appear.  
3. Press the POINT DOWN BUTTON and a red arrow will appear.  
4. Move the arrow to one of the "Modes" (Stored position) that you want to confirm by pressing the POINT UP/DOWN  
BUTTON(s). Press the SELECT BUTTON. Another dialog box "PC ADJUSTMENT DISPLAY" will appear.  
5. To quit the MENU, point to Quit and then press the SELECT BUTTON.  
6. To modify the parameter data, perform the steps 9 ~ 24 of PC ADJUSTMENT SECTION.  
7. To clear the parameter data, move the arrow by pressing the POINT UP/DOWN BUTTON(s) to select Mode free.  
Press the SELECT BUTTON. "OK?" is displayed for confirmation.  
8. Move the arrow to Yes and then press the SELECT BUTTON to clear the parameter data.  
9. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.  
MAIN MENU DISPLAY  
Stored  
Stored  
1
PC ADJUSTMENT  
630  
DISPLAY  
1056  
47  
4
OK ?  
Yes  
No  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER MODE  
PICTURE SCREEN ADJUSTMENT  
This projector has a picture screen resize function, which enables you to display the image in desirable size.  
1. Press MENU BUTTON and MAIN MENU DISPLAY dialog box will appear.  
2. Press POINT LEFT/RIGHT BUTTON(s) to select SCREEN and press the SELECT BUTTON. Another dialog box  
SCREEN ADJUST DISPLAY will appear.  
3. Press POINT DOWN BUTTON and a red arrow will appear.  
4. Move the arrow to the function that you want to adjust.  
MAIN MENU DISPLAY  
SCREEN ADJUST  
DISPLAY  
True  
1. To turn the image size to true size (1280 x 1024 in SXGA, 1024 x 768 in XGA, 800 x 600 in  
True  
SVGA and 640 x 480 in VGA), move the arrow to True by pressing POINT UP/DOWN  
BUTTON(s) and then press SELECT BUTTON. The image size is turned to the true size. The  
"True" is displayed to indicate True mode (except for XGA input).  
2. When the input image data resolution is more than the screen size (1024 x 768), the image can  
be panned by pressing the POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) BUTTON(s).  
Digital zoom  
D. Zoom  
1. To adjust the image size or pan the image, move the arrow to Digital zoom by pressing POINT  
UP/DOWN BUTTON(s) and then press SELECT BUTTON. MAIN MENU DISPLAY and  
SCREEN ADJUST DISPLAY will disappeared and "D. Zoom" and the magnifying-glass icon is  
displayed.  
2. Move the magnifying-glass icon by pressing the POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) BUTTON(s).  
3. To expand the image, press the D.ZOOM (G) button or the SELECT button on the remote control unit. The image is  
magnified by degrees (Expand function).  
4. To compress the image size, press the D.ZOOM (G) button or the FRONT CLICK button on the remote control unit. The  
size of image is reduced by degrees (Compress function).  
5. To pan the image, press POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) BUTTON(s) and move the magnifying-glass  
icon.  
NOTE:  
1. To cancel the True and Digital Zoom mode, press other buttons (Except NORMAL BUTTON).  
2. Press the NORMAL BUTTON in True and Digital Zoom mode, the image size changed to the screen size (1024 x 768).  
3. The "True" and "Digital zoom" cannot be operated when "RGB", "HDTV1035i" or "HDTV1080i" is selected on the  
COMPUTER SYSTEM SELECT menu. (See pages 36 ~ 37).  
G This projector cannot display in the resolution more than 1280 x 1024. If your computer's screen resolution is higher than  
1280 x 1024, reset the resolution to the lower.  
G The image data of VGA (640 x 480), SVGA (800 x 600), or SXGA (1280 x 1024) is modified to fit the screen size in the  
initial mode.  
GGThe maximum size in expand mode is 7 times as large as the original screen size.  
GGThe minimum size in compress mode is the screen size (1024 x 768) in XGA or SXGA mode, 800 x 600 in SVGA mode  
or 640 x 480 in VGA mode.  
GGPanning function can work only when the image is expanded.  
GGThe normal "Panning Operation" may not function properly if the computer system prepared with the "PC Adjust" is used.  
Keystone  
1. When the image is distorted vertically, move the arrow to Keystone by pressing POINT UP/DOWN BUTTON(s) and then  
press SELECT BUTTON. The "Keystone" is displayed to indicate Keystone mode.  
2. Press the POINT UP BUTTON to reduce the upper part of the image, and the POINT DOWN BUTTON to reduce the  
lower part. (See "KEYSTONE FUNCTION" section on page 28).  
3. Press the NORMAL BUTTON in keystone mode, the image changed to original image (not correct keystone distortion).  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER FUNCTION SETTING  
This projector has other functions settings: Blue back, Display, Ceiling, Rear, Split wipe, Power management, Remote  
control and Lamp age.  
See the next page menus figure and settings.  
BLUE BACK (On or Off)  
When this function is in the "On" position, the projector will project a blue image without video noise on the screen when  
the video source is unplugged or turned off.  
DISPLAY (On or Off)  
When this function is in the "On" position, on-screen displays always appears when adjustments are made. Although  
these on-screen displays are very helpful, these may spoil the view if adjustments are made during presentations. To  
avoid this, you can keep back certain displays by switching this function "Off". The followings are the displays that you  
can hide.  
GGWait Display  
GGMode Display  
GGVolume Display  
GGTrue Display  
GGMute Display  
GGD.Zoom Display  
GGNormal Display  
GGZoom/Focus Display  
GGKeystone Display  
GGNo show Display  
CEILING (On or Off)  
When this function is in the "On" position, the top/bottom and the left/right  
picture reverse capability lets you project from a ceiling-mounted projector.  
T
L
T B  
L R  
REAR (On or Off)  
When this function is in the "On" position, the left/right picture reverse capability  
lets you project onto a rear projection screen.  
SPLIT WIPE (On or Off)  
Turn SPLIT WIPE function On in the SETTING menu. The picture will change into the next one by sliding black image  
side ways when the input source is changed.  
Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and the  
next one appears from the center to side ways like drawing the black curtains.  
POWER MANAGEMENT (On or Off)  
Power management will be turn the projector Lamp off when the input signal is interrupted (Picture is not displayed) over  
5 minutes. This aims at saving power and Lamp life. The Lamp is automatically turned on when the signal is input.  
To activate this function, turn the "Power management" in the SETTING menu "On".  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER FUNCTION SETTING  
REMOTE CONTROL CODE CHANGE (Mode 1 or Mode 2)  
This projector can be operated with two different code, one is factory-set normal code (MODE 1) and the other one is  
extended code (MODE 2).  
This is used to prevent the remote control operation mixture (jam) when two projector and several remote control video  
equipments are system-up and used together.  
When you change the code MODE 2, you must change both projector and Remote Control Unit.  
To change Projector code;  
Set REMOTE CONTROL in SETTING menu (below figure) to "MODE 2".  
Mode 1  
To change Remote Control Unit code;  
Press both "MENU" and "NORMAL" button on the Remote Control Unit for over 10  
seconds.  
After code changed, make sure the Remote Control operation is functioning properly. To  
go back to normal code (MODE 1), take same operation above.  
Mode 2  
Setting the Blue back, Display, Ceiling, Rear, Split wipe, Power management  
and Remote control  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT BUTTON. Another dialog box  
SETTING DISPLAY will appear.  
3. Press the POINT DOWN BUTTON and a red arrow will appear.  
4. Move the arrow to an item you want to set by pressing the POINT UP/DOWN BUTTON(s).  
5. If you want to change the setting, press the SELECT BUTTON.  
6. To quit the MENU, point to Quit and then press the SELECT BUTTON.  
7. The settings are memorized even if the MAIN ON/OFF is switched off.  
MAIN MENU DISPLAY  
Auto  
SETTING  
DISPLAY  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER FUNCTION SETTING  
LAMP AGE  
The Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lamp  
replacement monitor timer by using this function.  
NOTE: Do not reset the LAMP REPLACEMENT MONITOR TIMER, except after the lamp is replaced.  
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.  
2. Press the POINT LEFT/RIGHT BUTTON(s) to select SETTING and press the SELECT BUTTON.  
Another dialog box SETTING DISPLAY will appear.  
3. Press the POINT DOWN BUTTON and a red arrow will appear.  
4. Move the arrow by pressing the POINT UP/DOWN BUTTON(s) to select Lamp age and then press the SELECT  
BUTTON. When you reset the lamp replace monitor, "lamp replace monitor reset?" is displayed for confirmation.  
5. Move the arrow to Yes and then press the SELECT BUTTON, "OK?"is displayed for confirmation.  
Move the arrow to Yes and then press the SELECT BUTTON, the lamp replace monitor is reset.  
6. Move the arrow to No and then press the SELECT BUTTON. The lamp replace monitor is not reset.  
7. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.  
MAIN MENU DISPLAY  
Auto  
SETTING  
DISPLAY  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
MAINTENANCE  
TEMPERATURE WARNING INDICATOR  
The TEMPERATURE WARNING INDICATOR flashes red when the internal  
temperature of the projector exceeds the normal temperature.  
Possible causes for the temperature warning may be:  
1. Ventilation slots of the projector are blocked. In such an event, reposition  
the projector so that ventilation slots are not obstructed.  
2. Air filter is clogged with dust particles. Remove dust from the air filter by  
following instructions in the Air Filter Care and Cleaning section below.  
3. If temperature warning indicator remains on after performing the checks  
listed above, cooling fan/internal circuits may be malfunctioning. Request  
service from an authorized dealer or service station.  
TEMPERATURE  
WARNING  
INDICATOR  
AIR FILTER CARE AND CLEANING  
The removable air filter prevents dust from accumulating on the surface of the projection lens and projection mirror.  
Should the air filter become clogged with dust particles, it will reduce the cooling fan's effectiveness and may result in  
internal heat build up and reduce the life of the projector.  
AIR FILTER  
COVER  
To clean the air filter, follow the cleaning procedures below:  
1. Turn the POWER ON/OFF button OFF.  
2. Remove the air filter cover.  
3. Remove the air filter from the filter cover.  
4. Clean the air filter with a vacuum cleaner.  
5. Replace the air filter. Make sure that air filter cover is fully inserted.  
Do not clean with water. Doing so may damage the air filter.  
AIR FILTER  
Do not operate the projector with air filter removed.  
AIR FILTER  
COVER  
RECOMMENDATION  
TO ENJOY PICTURE IMAGE, USE THE PROJECTOR IN THE CLEAN  
ENVIRONMENT. USAGE IN THE CLEAN ENVIRONMENT IS RECOMMENDED.  
When used under the dusty or smoky conditions, dust may accumulate on the liquid  
crystal panel and lens inside it, and may resultantly be projected on the screen together  
with the picture.  
When the above symptoms are noticed, contact a Boxlight Corporation at 1-800-762-  
5757 or 360-779-7901 for cleaning.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
LAMP REPLACEMENT  
If the lamp fails to come on and the lamp monitor on the projector light is orange, you must replace the lamp.  
G For continued safety, replace with a lamp assembly of the same type.  
G Allow the projector to cool for at least 45 minutes before you open the lamp cover. The inside of the  
projector can become very hot.  
G Do not drop the lamp module or touch the glass bulb ! The glass can shatter and cause injury.  
Follow these steps to replace the lamp assembly.  
1. Turn off the projector and allow the projector to cool thoroughly.  
2. Disconnect the AC cord from the projector.  
3. Remove screw with a screwdriver and remove the lamp cover.  
4. Remove 2 screws with a screwdriver and pull out the lamp assembly by  
grasping the handle.  
5. Replace the lamp assembly.  
6. Tighten 3 screws to secure the lamp cover and the lamp assembly.  
7. Connect the detachable AC cord to the projector.  
LAMP  
8. Reset the lamp replacement monitor timer.  
REPLACEMENT  
(See "LAMP AGE" section on page 48.)  
INDICATOR  
NOTE: Do not reset the LAMP REPLACEMENT MONITOR TIMER, except  
after the lamp is replaced.  
LAMP  
ASSEMBLY  
HANDLE  
LAMP  
COVER  
ORDER REPLACEMENT LAMP  
Replacement Lamp can be ordered through Boxlight Corporation at 1-800-762-5757 or 360-779-7901.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
CLEANING THE LENS  
Follow these steps to clean the projection lens:  
1. Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth.  
Avoid using an excessive amount of cleaner.  
Abrasive cleaners, solvents or other harsh chemicals might scratch the lens.  
2. Lightly wipe the cleaning cloth over the lens.  
3. When you are not using the projector, replace the lens cover.  
TROUBLESHOOTING  
Before calling Boxlight Corporation for assistance, check the matters below once again.  
1. Make sure you have connected the projector to your equipment as described in section "CONNECTING THE  
PROJECTOR" on pages 11 ~ 18.  
2. Check cable connections. Verify that all computer, video and power cords are properly connected.  
3. Verify that power is switched on.  
4. If the projector still does not display an image, re-start the computer.  
5. If the image still does not display, unplug the projector from the computer and check the computer monitor's display.  
The problem may be with your graphics controller rather than with the projector. (When you reconnect the projector,  
remember to turn the computer and monitor off before you power up the projector. Power the equipment back up in  
order of: Projector and computer)  
6. If the problem still exists, check the following chart.  
Problem:  
Try these Solutions:  
No power.  
G Plug the projector into an AC outlet.  
G Turn the MAIN ON/OFF switch to ON.  
G Press the POWER ON/OFF switch to ON.  
G Be sure the READY INDICATOR light is ON.  
G Wait approximate 2 minutes after the projector is turned OFF before turning the  
projector back on.  
NOTE: After pressing the POWER ON/OFF button to OFF. The projector functions  
as indicated.  
1. The LAMP POWER indicator will light and the READY indicator will turn off.  
2. After approximate 2 minutes, the READY indicator will light green again and the  
projector may be turned on by pressing the POWER ON/OFF button.  
G Check temperature warning indicator. If the indicator flashes red, the projector  
cannot be turned on.  
(See "BASIC OPERATION" section on page 27).  
G Check the projection lamp.  
G Replace the lamp cover. (Check the interlock switch inside of the lamp cover.)  
G Adjust the focus.  
Image is out of focus.  
G Make sure the projection screen is at least 4.6' (1.4 m) from the projector.  
G Check the projection lens to see if it needs cleaning.  
NOTE: Moving the projector from a cool temperature location to a warm  
temperature location may result in moisture condensation on the lens. In  
such an event, leave the projector OFF and wait until condensation  
disappears.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Problem:  
Try these Solutions:  
Check Ceiling/Rear feature.  
(See "OTHER FUNCTION SETTING" section on pages 46 ~ 47).  
Picture is L/R Reversed.  
Picture is T/B inverted.  
Check Ceiling feature.  
(See "OTHER FUNCTION SETTING" section on pages 46 ~ 47).  
Check Display feature.  
(See "OTHER FUNCTION SETTING" section on pages 46 ~ 47).  
Some displays are not seen  
during the operation.  
G Check audio cable connection from audio input source.  
G Adjust audio source.  
No sound.  
G Press the VOLUME (+) button.  
G Press the MUTE button.  
G Check the batteries.  
Remote control unit does not  
work.  
G Make sure nothing is blocking between the remote control sensor and  
remote control unit.  
G Make sure you are not too far from the projector when using the remote  
control unit. Maximum operate range 16.4 ' (5 m).  
G Check the ALL-OFF switch on the Remote Control Unit is set to "ON".  
G Check the transmitted signal mode from the remote control unit.  
(See "OTHER FUNCTION SETTING" section on pages 46 ~ 47).  
G Check the cable connection between the projector and the computer.  
G Check the mouse setting on your computer.  
Wireless mouse function  
does not work.  
G Turn on the projector before you turn on the computer.  
SERVICE  
WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet.  
Boxlight Service is easily obtained. If after following instructions above, you find that service is necessary, contact Boxlight for  
assistance at 1-800-762-5757 or 360-779-7901.  
Give the model number and explain the difficulty. We will advise you how to obtain service.  
Please have the following information available:  
GGSerial Number of Projector.  
GGResolution of Computer.  
GGRefresh rate of Computer.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
TECHNICAL SPECIFICATIONS  
Projector Type  
Multi-media Projector  
10.7" (272 mm) x 5.7" (145.5 mm) x 16.2" (412.5 mm)  
15.2 Ibs (6.9 kg)  
Dimensions (W x H x D)  
Net Weight  
1.3" TFT Active Matrix type x 3 panels  
2,359,296 {786,432 (1,024 x 768) x 3}  
LCD Panel System  
Number of Pixels  
Color System  
6 color system (PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N)  
H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz  
Scanning Frequency  
Projection Image Size (Diagonal)  
Projection Lens  
Adjustable from 31" to 400"  
F1.8 ~ 2.1 lens with f=48.4 mm ~ 62.8 mm Motor zoom and focus  
800 TV lines  
Horizontal Resolution  
Throw Distance  
4.6' (1.4 m) ~ 47.3' (14.4 m)  
200 watt type  
Projection Lamp  
AV Input Jacks  
RCA Type 3 x 2 sets (Video, Audio R and L), (Y, Cb/Pb, Cr/Pr)  
and DIN 4 pin (S-Video) x 1  
(VGA) HDB 15 Terminal x 2, DIN 8 pin (Control port) x 2  
(VGA) HDB 15 Terminal  
Computer Input Jacks  
Computer Output Jack  
Computer Audio Input Jacks  
Mini Stereo Type x 2  
EXT. Speaker Jack (Stereo) x 1  
Other Jack  
INT. SP. Stereo (R and L), 2 watt RMS (T.H.D.10%)  
Built-in Speaker  
Image Elevation Adjustment  
Voltage  
Up to 6 °  
100 ~ 120V, 200 ~ 240V AC, 50/60 Hz  
Power Consumption  
3.6/1.8A (Max. Ampere)  
41°F ~ 95°F ( 5°C ~ 35°C)  
14°F ~ 140°F (-10°C ~ 60°C)  
Operating Temperature  
Storage Temperature  
Wireless Remote Control with Laser Beam (Class  
Max. Output 1mW/Wave Length 650 ± 20nm, batteries (2) AA, UM3 or R06 type.  
Laser)  
Remote Control Transmitters  
This symbol on the nameplate means the product is Listed by Underwriters  
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety  
standards against risk of fire, casualty and electrical hazards.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
BOXLIGHT CORPORATION ("BOXLIGHT") warrants that each Boxlight MP-37t/MP-36t ("the Product") sold hereunder  
will conform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall apply  
only to the first person or entity that purchases the Product for personal or business use and not for the purpose of  
distribution or resale. Said warranty shall continue for a period of two (2) years from the date of such purchase.  
BOXLIGHT does not warrant that the Product will meet the specific requirements of the first person or entity that  
purchases the Product for personal or business use. Lamp is warrantied for 120 days.  
BOXLIGHT CORPORATION's liability for the breach of the foregoing limited warranty is limited to the repair or  
replacement of the Product or refund of the purchase price of the Product, at BOXLIGHT's sole option. To exercise the  
Purchaser's rights under the foregoing warranty, the Product must be returned at the Purchaser's sole cost and expense,  
to BOXLIGHT or any authorized service center provided, however, that the Product must be accompanied by a written  
letter explaining the problem and which includes (i) proof of purchase; (ii) the dealer's name; and (iii) the model and serial  
number of the Product. A return authorization number, issued by the BOXLIGHT customer service department, must also  
be clearly displayed on the outside of the shipping carton containing the Product.  
WARRANTY LIMITATION AND EXCLUSION  
BOXLIGHT CORPORATION shall have no further obligation under the foregoing limited warranty if the Product has been  
damaged due to abuse, misuse, neglect, accident, unusual physical or electrical stress, unauthorized modification,  
tampering, alterations, or service other than by BOXLIGHT or its authorized agents, causes other than from ordinary use  
or failure to properly use the Product in the application for which said Product is intended.  
DISCLAIMER OR UNSTATED WARRANTIES  
The warranty printed above is the only warranty applicable to this purchase.  
All other warranties express or implied, including, but not limited to, the implied warranties or merchantability and fitness  
for a particular purpose are disclaimed. There are no warranties that extend beyond the face of hereof and the foregoing  
warranty shall not be extended, altered or varied except by written instrument signed by BOXLIGHT CORPORATION  
LIMITATION OR LIABILITY  
It is understood and agreed that BOXLIGHT's liability whether in contract, in tort, under any warranty, in negligence or  
otherwise shall not exceed the return of the amount of the purchase price paid by purchaser and under no circumstances  
shall BOXLIGHT be liable for special, indirect or consequential damages. The price stated for the Product is a  
consideration in limiting BOXLIGHT's liability. No action regardless of form, arising out of the agreement to purchase the  
product may be brought by purchaser more than one year after the cause of action has accrued.  
Boxlight  
19332 Powder Hill Place  
Poulsbo, WA 98370-7407 USA  
U.S. and Canada 800-762-5757  
International 360-779-7901  
Printed in Japan  
Part No. 610 282 3080 (1AA6P1P2089-- MH6E)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

BenQ MP3 Player Joybee 200 User Manual
Bissell Hot Beverage Maker 29H3 User Manual
Blanco Indoor Furnishings 157 131 User Manual
Blanco Indoor Furnishings 501 204 User Manual
BMW Car Stereo System K1200 LT User Manual
Bolens Lawn Mower Series 544 User Manual
Brother All in One Printer FAX 775 User Manual
Cadco Oven LKR 220 User Manual
Cannon Cooktop C50GCIK User Manual
Canon Calculator AS 8 User Manual