BOXLIGHT Projector CP 322i CP 634i User Manual

BOXLIGHT  
Liquid Crystal Projector  
CP-322i/CP-634i  
ENGLISH  
USER'S MANUAL Vol.1 Basic  
Please read this user's manual thoroughly to ensure correct usage through understanding.  
R E S E T  
E N O T S Y E K  
P O W E R  
T E N P  
L A N P  
U T  
I N P  
N
/ O Y B D N A T S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This liquid crystal projector is used to project  
various computer signals as well as NTSC / PAL /  
SECAM video signals onto a screen. Little space  
is required for installation and large images can  
easily be realized.  
PROJECTOR  
FEATURES  
Ultra High Brightness  
Keystone Distortion Correction  
G
G
Crisp, ultra-bright presentations is achieved  
by using a UHB (ultra high brightness) lamp  
and a highly efficient optical system  
Quick correction of distorted images electrically  
Partial Magnification Function  
Whisper Mode Equipped  
G
G
Interesting parts of images can be magnified  
for closer viewing  
Special mode is available for reducing  
projector noise to achieve quieter operation  
Your projector should come with the items  
shown below. Check to make sure that all the  
items are included. Contact your dealer if  
anything is missing.  
PREPARATIONS  
NOTE Keep the original packing material for future reshipment.  
R E S E T  
E N O T S Y E K  
P O W E R  
T
U
I N P  
T E N P  
N O  
/
Y B D N A T S  
P
N
L
A
Power cord  
(UK Type)  
Power cord  
(Europe Type)  
Power cord  
(US Type)  
Projector  
(with Lens Cap)  
Liquid Crystal Projector  
CP-S317/CP-X327  
(CP-S317W/CP-X327W)  
USER'S MANUAL Vol.1 Basic  
Please read this user's manual thoroughly to ensure correct usage through understanding.  
BEDIENUNGSANLEITUNG Teil  
1
Grundlagen  
Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.  
MANUEL D'UTILISATION Vol.1 Fondements  
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.  
MANUALE D'ISTRUZIONI Vol.1 Informazioni di base  
Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere quanto riportato  
ai fini di un corretto utilizzo del proiettore.  
MANUAL DE USUARIO Vol.1 Básico  
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.  
GEBRUIKSAANWIJZING Vol.1 Basis  
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de  
uitgebreide mogelijkheden.  
BRUKERHÅNDBOK Vol.1 Grunnleggende  
være garantert driftssikker bruk.  
Vennligst les denne bruksanvisningen grundig for  
å
NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico  
Para assegurar uso correto do equipamento, por favor leia atentamente este manual do utilizador.  
o
RGB cable  
Video/Audio cable  
USB mouse  
cable  
R
E
W
O
P
T
E
S
E
R
E
N
O
T
S
Y
E
K
T
U
P
N
N
O
P
N
A
L
N
E
Y
B
D
N
User's Manual  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
OFF  
FREEZE  
KEYSTONE  
POSITION  
MENU  
Two AA batteries  
(for the remote  
control)  
ENTER  
ESC  
RESET  
Remote control  
Soft carrying case  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING Precautions to observe in regards to the power cord: Please use extra  
caution when connecting the projector's power cord as incorrect or faulty  
connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the  
following safety guidelines to insure safe operation of the projector:  
Only plug the power cord into outlets rated for use with the power cord's specified voltage range.  
Only use the power cord that came with the projector.  
NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-  
PRONGED PLUG!  
Make sure that you firmly connect the power cord to the projector and wall outlet.  
Connect your devices to the projector  
Connect your computer, VCR and/or other  
devices you will be using to the projector.  
8
12  
1
Insert the batteries into the remote  
control  
13  
2
3
Connect the power cord  
(1) Connect the connector of the electrical power cord to the AC inlet of the main unit.  
(2) Firmly plug the power cord's plug into the outlet  
Power outlet  
(1)  
(2)  
AC inlet  
Power cord  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE PROJECTOR  
PART NAMES  
Indicates the corresponding  
reference page  
RESET button  
MENU button  
24  
23  
POWER indicator  
KEYSTONE button  
14  
20  
TEMP indicator  
27  
INPUT button  
15  
LAMP indicator  
26  
STANDBY/ON button  
14  
R E S E T  
E N O T S Y E K  
T U  
P O W E R  
I N P  
N
T E N P  
/ O Y B D N A T S  
P
N
L A  
Zoom ring  
Focus ring  
15  
15  
Air filter  
27  
Elevator button  
6
Remote sensor  
13  
Lens cap  
14  
S-VIDEO IN port  
11  
AUDIO IN R and L ports  
10  
RGB IN 1 and 2 ports  
10  
VIDEO IN port  
11  
AC power inlet  
3
S
T
A
N
D
B
Y
/O  
N
IN  
P
U
LANP  
TENP  
POWER  
T
K
E
Y
S
T
O
N
E
R
E
S
E
T
Elevator button  
6
CONTROL port  
Power switch  
10  
14  
RGB OUT port  
12  
USB port  
10  
COMPONENT VIDEO port  
11  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE REMOTE CONTROL  
SEARCH button  
22  
14  
STANDBY/ON button  
RGB button  
15  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
VIDEO button  
AUTO button  
BLANK button  
15  
22  
19  
22  
ASPECT  
BLANK  
VOLUME  
ASPECT button  
HOME  
END  
PAGE UP  
MAGNIFY  
ON  
VOLUME button  
MUTE button  
17  
17  
20  
MAGNIFY buttons  
21  
PAGE DOWN  
MUTE  
OFF  
FREEZE  
KEYSTONE  
FREEZE button  
KEYBOARD buttons  
POSITION button  
KEYSTONE button  
21  
24  
18  
POSITION  
MENU  
MENU button  
23  
ENTER  
,
,
,
23  
23  
Cursor buttons  
ESC  
RESET  
RESET button  
ENTER button  
24  
23  
ESC button  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING UP THE PROJECTOR  
CAUTION Install the projector in a suitable environment according to instructions  
of the accompanying manual SAFETY INSTRUCTIONSand this manual.  
If you press the elevator buttons without holding the projector, the projector might  
crash down, overturn, smash your fingers and possibly result in malfunction. To  
prevent damaging the projector and injuring yourself, ALWAYS HOLD THE  
PROJECTOR whenever using the elevator buttons to adjust the elevator feet.  
Adjusting the Projector's Elevator Feet  
You can use the elevator feet to make adjustments if the surface on which you  
need to set the projector is uneven or if you otherwise need to adjust the angle of  
projection. The adjustment range of the elevator feet is 0 to 9 degrees.  
Press and hold in the elevator  
buttons  
1
Raise or lower the projector to the  
2
desired height and then release the  
elevator buttons  
When you release the elevator buttons, the elevator  
feet will lock into position.  
As necessary, you can also finely  
3
adjust the height of the projector by  
twisting the elevator feet by hand  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Screen Size and Projection Distance  
Refer to the illustrations and tables below to determine the screen size and  
projection distance.  
The values shown in the table are calculated for a full size screen  
(CP-S318: 800x600 pixels/CP-X328: 1024x768 pixels).  
a:Distance from the projector to the screen (±10%)  
b:Distance from the lens center to the bottom of the screen (±10%)  
c:Distance from the lens center to the top of the screen (±10%)  
The screen  
Top view  
If 4:3 aspect ratio  
4
3
a [inch (m)]  
Min. Max.  
b
c
Screen Size [inch (m)]  
[inch (cm)] [inch (cm)]  
30 (0.8)  
40 (1.0)  
50 (1.3)  
60 (1.5)  
70 (1.8)  
80 (2.0)  
90 (2.3)  
100 (2.5)  
120 (3.0)  
150 (3.8)  
200 (5.0)  
250 (6.3)  
300 (7.5)  
35 (0.9) 42 (1.1) 1 (2) 17 (44)  
47 (1.2) 56 (1.4) 1 (3) 23 (58)  
59 (1.5) 71 (1.8) 1 (4) 29 (73)  
71 (1.8) 85 (2.2) 2 (4) 34 (87)  
83 (2.1) 100 (2.5) 2 (5) 40 (102)  
95 (2.4) 114 (2.9) 2 (6) 46 (116)  
107 (2.7) 129 (3.3) 3 (7) 51 (131)  
119 (3.0) 143 (3.6) 3 (7) 57 (145)  
143 (3.6) 172 (4.4) 3 (9) 69 (174)  
180 (4.6) 216 (5.5) 4 (11) 86 (218)  
240 (6.1) 288 (7.3) 6 (15) 114 (290)  
300 (7.6) 361 (9.2) 7 (18) 143 (363)  
360 (9.2) 433 (11.0) 9 (22) 171 (435)  
Lens center  
c
Side view  
Top view  
b
a
The screen  
If 16:9 aspect ratio  
16  
9
a [inch (m)]  
Min. Max.  
b
c
Screen Size [inch (m)]  
[inch (cm)] [inch (cm)]  
30 (0.8)  
40 (1.0)  
50 (1.3)  
60 (1.5)  
70 (1.8)  
80 (2.0)  
90 (2.3)  
100 (2.5)  
120 (3.0)  
150 (3.8)  
200 (5.0)  
250 (6.3)  
300 (7.5)  
38 (1.0) 46 (1.2) 2 (4)  
51 (1.3) 61 (1.6) 2 (5)  
64 (1.6) 77 (2.0) 3 (6)  
77 (2.0) 93 (2.4) 3 (8)  
90 (2.3) 109 (2.8) 4 (9)  
104 (2.6) 125 (3.2) 4 (10) 43 (110)  
117 (3.0) 140 (3.6) 5 (12) 49 (124)  
130 (3.3) 156 (4.0) 5 (13) 54 (137)  
156 (4.0) 188 (4.8) 6 (15) 65 (165)  
196 (5.0) 235 (6.0) 8 (19) 81 (206)  
261 (6.6) 314 (8.0) 10 (26) 108 (275)  
327 (8.3) 393 (10.0) 13 (32) 135 (343)  
393 (10.0) 472 (12.0) 15 (39) 162 (412)  
16 (41)  
22 (55)  
27 (69)  
32 (82)  
38 (96)  
c
Lens center  
Side view  
b
a
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING YOUR DEVICES  
Devices You Can Connect to the Projector  
(Refer to this section for planning your device  
configuration to use for your presentation.)  
CAUTION Incorrect connecting could result in fire or electrical shock. Please  
read this manual and the separate SAFETY INSTRUCTIONS.  
ATTENTION Precautions to observe when connecting other devices to the projector  
Whenever attempting to connect other devices to the projector, please thoroughly  
read the manual of each device to be connected.  
TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to  
connect a live device to the projector may generate extremely loud noises or other  
abnormalities that may result in malfunction and/or damage to the device and/or  
projector. Refer to the TECHNICALof the USERS MANUAL (Vol.2) for the pin  
assignment of connectors and RS-232C communication data.  
Make sure that you connect devices to the correct port. Incorrect connection may  
result in malfunction and/or damage to the device and/or projector.  
A component cable and some other cables have to be used with core set. Use the  
accessory cable or a designated-type cable for the connection. For cables that have  
a core only at one end, connect the core to the projector.  
Secure the screws on the connectors and tighten.  
Indicates the  
corresponding  
reference page  
Display monitors  
12  
DVD players  
11  
10 Laptop computers  
VCRs  
11  
Desktop computers  
10  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ports and Cables  
Refer to the table below to find out which projector port and cable to use for connecting a  
given device. Use this table for determining which cables to prepare.  
Function  
Projector Port  
Connection Cables  
RGB IN 1  
Accessory RGB cable or optional RGB  
cable with D-sub 15-pin shrink jack and  
inch thread screws  
RGB input  
RGB IN 2  
RGB OUT  
USB  
RGB output  
USB mouse control  
PS/2 mouse control  
ADB mouse control  
Serial mouse control  
RS-232C communication  
Accessory USB cable  
Optional PS/2 mouse cable  
Optional ADB mouse cable  
Optional serial mouse cable  
Optional RS-232C cable  
CONTROL  
S-VIDEO IN  
Optional S-video cable with mini DIN 4-pin  
jack  
S-video input  
Video input  
VIDEO IN  
Accessory audio/video cable  
COMPONENT VIDEO Y  
COMPONENT VIDEO CB/PB  
COMPONENT VIDEO CR/PR  
AUDIO IN L  
Component video input  
Audio input  
Optional component video cable  
Accessory audio/video cable or optional  
audio cable with RCA jack  
AUDIO IN R  
NOTE  
About Plug-and-Play Capability  
This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by  
connecting this projector to computers that are VESA DDC (display data channel)  
compatible. Please take advantage of this function by connecting the accessory RGB  
cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-and-Play may not work  
properly if any other type of connection is attempted.  
Plug-and-Play is a system composed of the computer, its operating system and  
peripheral equipment (i.e. display devices).  
Please use the standard drivers as this projector is a Plug-and-Play monitor.  
Plug-and-Play may not function properly with some type of computers. Use the RGB  
IN 2 port if Plug-and-Play does not function correctly.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING YOUR DEVICES (continued)  
Connecting to a Computer  
ATTENTION Whenever attempting to connect a laptop computer to the projector,  
be sure to activate the laptop's RGB external image output (set the laptop to CRT  
display or to simultaneous LCD and CRT display). For details on how this is done,  
please refer to the instruction manual of the corresponding laptop computer.  
1
RGB IN  
2
1
RGB IN  
2
K
K
AUDIO IN  
AUDIO IN  
S-VIDEO IN  
S-VIDEO IN  
R
L
/
(MONO) VIDEO IN  
A
R
L
/
(MONO) VIDEO IN  
A
C
C
B
B
CR  
/ RR  
CB  
/
PB  
Y
CR  
/ RR  
CB  
/
PB  
Y
B
D
COMPONENT VIIDEO  
RGB OUT  
CONTROL  
COMPONENT VIIDEO  
RGB OUT  
CONTROL  
USB  
USB  
A
B
A
C
D
B
USB cable  
If connecting to a  
USB port equipped  
computer  
Laptop computer  
Desktop computer  
NOTE  
Some computers may have multiple display screen modes. Use of some of these  
modes will not be possible with this projector.  
For some RGB input modes, the optional Mac adapter is necessary.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a DVD Player  
1
RGB IN  
2
K
AUDIO IN  
(MONO) VIDEO IN  
S-VIDEO IN  
R
L
/
B
B
B
C
CR  
/ RR  
CB  
/
PB  
Y
A
A
A
COMPONENT VIIDEO  
RGB OUT  
CONTROL  
USB  
A
B
C
S-VIDEO cable  
If using a S-video  
connection  
If using an audio/video  
connection  
If using a component  
video connection  
DVD player  
Connecting to a VCR  
1
RGB IN  
2
K
AUDIO IN  
(MONO) VIDEO IN  
S-VIDEO IN  
R
L
/
A
A
A
B
CR  
/ RR  
CB  
/
PB  
Y
COMPONENT VIIDEO  
RGB OUT  
CONTROL  
USB  
A
B
S-VIDEO cable  
If using a S-video  
connection  
VCR  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING YOUR DEVICES (continued)  
Connecting to a Display Monitor  
1
RGB IN  
2
K
AUDIO IN  
L / (MONO) VIDEO IN  
S-VIDEO IN  
R
CR  
/ RR  
CB  
/ PB  
Y
A
COMPONENT VIIDEO  
RGB OUT  
CONTROL  
USB  
A
Display monitor  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL  
Putting batteries into the remote control unit  
CAUTION Precautions to observe in regards to the batteries  
Always handle the batteries with care and use them only as directed. Improper use may result in  
battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.  
Keep the battery away from children and pets.  
Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with used ones.  
When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the remote control).  
When you dispose the battery, you should obey the law in the relative area or country.  
Remove the battery  
cover  
Close the battery  
cover  
Insert the batteries  
Align and insert the two AA  
batteries (that came with the  
projector) according to their plus  
and minus terminals (as indicated  
in the remote control).  
1
2
3
Slide back and remove  
the battery cover in the  
direction of the arrow.  
Replace the battery cover  
in the direction of the arrow  
and snap it back into place.  
Operating the remote control  
The remote control works with both the  
projector's front and rear remote sensors.  
The range of the remote sensor on the front and  
back is 3 meters with a 60-degree range (30  
degrees to the left and right of the remote sensor).  
Since the remote control uses infrared light to send  
signals to the projector (Class 1 LED), be sure to  
approximately  
3 meters  
approximately  
3 meters  
use the remote control in an area free from  
obstacles that could block the remote control's  
output signal to the projector.  
ATTENTION  
Precautions to observe when using the remote control  
Do not drop or otherwise expose the remote control to physical impact.  
Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.  
Remove the batteries from the remote control and store them in a safe place if you  
won't be using the remote control for an extended period.  
Replace the batteries whenever the remote control starts to malfunction.  
When strong light, such as direct sunlight or light from an extremely close range (such as from an  
inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function.  
Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TURNING ON THE POWER  
Precautions  
8
12  
Connect all devices to be used to the projector prior to turning on the power.  
WARNING When the power is ON, a strong light is emitted. Do not look into the  
lens.  
Make sure that the power cord is firmly and  
correctly connected to the projector and outlet  
1
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
3
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
Turn on the projector's power  
PAGE DOWN  
MUTE  
2
Set the power switch to [ | ] (ON). The projector will go  
to STANDBY mode and the POWER indicator will light to  
OFF  
FREEZE  
KEYSTONE  
solid orange.  
power switch  
Control panel  
LANP  
TENP  
POWER  
POWER indicator  
STANDBY/ON INPUT KEYSTONE RESET  
A
LA  
N
P
P
TE  
N
ER  
E  
P
O
W
RE  
SE  
T
LAN  
P
E
TE  
ER  
YSTONE  
NP  
PO  
W
RESET  
T E S E R  
E N O T S Y E K  
R
E
W
O
P
T
U
P N  
I
P N  
P N A  
N O  
/
Y B D N A T S  
E
T
L
Press the STANDBY/ON button (control  
panel or remote control)  
3
4
The projector begins warming up and the POWER  
indicator blinks green.  
STANDBY/ON  
The POWER indicator stops blinking  
and lights to solid green once the  
projector's power is completely on.  
NOTE  
Turn the  
power on/off in  
right order.  
Power on the  
projector before the  
computer or video  
tape recorder.  
Remove the lens cap  
The picture is projected.  
Power off the  
projector after the  
computer or video  
tape recorder.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting an Input Signal  
Using the remote control  
Using the projector's control panel  
5
If selecting RGB input  
Press the RGB button  
Press the INPUT button  
As illustrated below, each time you  
press the INPUT button, the projector  
switches between its input signal  
ports. Select the signal you wish to  
project.  
Press this button to toggle between the  
devices connected to RGB IN 1 and 2.  
As illustrated below, each time you  
press the RGB button, the projector  
switches between RGB IN 1 and 2.  
Select the signal you wish to project.  
INPUT  
RGB  
RGB IN 1  
RGB IN 2  
RGB IN 1  
RGB IN 2  
VIDEO IN  
If selecting video input  
Press the VIDEO button  
COMPONENT VIDEO  
S-VIDEO IN  
Press this button to toggle between the  
devices connected to VIDEO IN, S-  
VIDEO IN and COMPONENT VIDEO. As  
illustrated below, each time you press  
the VIDEO button, the projector  
switches between VIDEO IN, S-VIDEO  
IN and COMPONENT VIDEO. Select the  
signal you wish to project.  
VIDEO IN  
S-VIDEO IN  
VIDEO  
COMPONENT VIDEO  
Use the zoom ring to adjust the  
screen size  
6
7
Use the focus ring to focus the  
picture  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TURNING OFF THE POWER  
Press the STANDBY/ON button (control  
1
panel or remote control)  
The message "Power off?" will appear on the screen for approximately 5 seconds.  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
STANDBY/ON  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
OFF  
FREEZE  
KEYSTONE  
Press the STANDBY/ON button again  
(control panel or remote control)  
Press the STANDBY/ON button again while the "Power off?"  
message is visible. The projector lamp goes off and starts cooling  
down. The POWER indicator blinks orange while the lamp cools  
down. (Pressing the STANDBY/ON button while the POWER  
indicator is blinking orange has no effect.)  
2
POSITION  
MENU  
ENTER  
ESC  
RESET  
The system goes into the STANDBY mode after cooling  
down and the POWER indicator stops blinking orange and  
then lights to solid orange.  
STANDBY/ON  
Control panel  
LANP  
TENP  
Check that the POWER indicator stops  
3
4
POWER  
blinking and lights to solid  
power switch  
orange.  
Switch the power switch to  
[O] (OFF).  
STANDBY/ON INPUT KEYSTONE RESET  
POWER indicator  
P
LA  
N
P
P
S  
TE  
N
ER  
P
O
W
RE  
SE  
T
LANP  
TENP  
ER  
EYSTONE  
PO  
W
RESET  
T E S E R  
E N O T S Y E K  
R
E
W
O
P
T
U
P N  
I
P N  
P N A  
N O  
/
Y B D N A T S  
E
T
L
Confirm that the POWER indicator has  
gone off and then attach the lens cap.  
When the projector has completed powering down, the  
POWER indicator will go off.  
NOTE  
Except in  
emergencies, follow  
the above-  
mentioned  
procedure for  
turning power off.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE VOLUME  
VOLUME  
Press the VOLUME button  
1
As illustrated on the right, a dialog will  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
appear on the screen to aid you in adjusting  
the volume.  
ASPECT  
BLANK  
VOLUME  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
16  
OFF  
FREEZE  
KEYSTONE  
Press the  
,
buttons to adjust  
2
POSITION  
MENU  
the volume  
Press the VOLUME button again to close the dialog and  
complete this operation. (Even if you don't do anything, the  
dialog will automatically disappear after a few seconds.)  
ENTER  
ESC  
RESET  
VOLUME  
Press this to increase the volume  
Press this to decrease the volume  
16  
TEMPORARILY MUTING THE SOUND  
Press the MUTE button  
1
STANDBY/ON  
As illustrated on the right, a dialog will appear on the  
screen indicating that you have muted the sound. Press  
the VOLUME button to close the dialog. (Even if you don't  
do anything, the dialog will automatically disappear after  
a few seconds.)  
VIDEO  
RGB  
SEARCH  
AUTO  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
OFF  
Press the MUTE button again to restore the sound.  
FREEZE  
KEYSTONE  
VOLUME  
MUTE  
POSITION  
MENU  
ENTER  
ESC  
RESET  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE POSITION  
Press the POSITION button  
1
As illustrated on the right, a dialog will appear on the screen  
to aid you in adjusting the position.  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
POSITION  
OFF  
FREEZE  
KEYSTONE  
POSITION  
POSITION  
MENU  
ENTER  
Use the  
,
,
,
buttons to adjust  
2
ESC  
RESET  
the position  
When you want to initialize the position, press the RESET  
button during adjustment.  
Press the POSITION button again to close the dialog and  
complete this operation. (Even if you don't do anything, the  
dialog will automatically disappear after a few seconds.)  
This function is only available for RGB IN 1/2 input.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE AUTOMATIC ADJUSTMENT FEATURE  
Press the AUTO button  
1
AUTO  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
Automatic Adjustment for RGB Input  
Horizontal position (H. POSIT), vertical position (V.  
POSIT), clock phase (H. PHASE) and horizontal size (H.  
SIZE) are automatically adjusted.  
PAGE DOWN  
MUTE  
OFF  
FREEZE  
KEYSTONE  
Make sure that the application window is set to its  
maximum size prior to attempting to use this feature.  
Dark pictures may still be incorrectly adjusted. Use a  
bright screen when adjusting.  
POSITION  
MENU  
ENTER  
ESC  
RESET  
Automatic Adjustment for Video Input  
The signal type best suited for the respective input  
signal is selected automatically.  
This feature is available only if VIDEO is set to AUTO in  
the INPUT menu.  
NOTE  
The automatic adjustment operation requires approximately 10 seconds. Also, please  
note that it may not function correctly with some input signals.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CORRECTING KEYSTONE DISTORTIONS  
Press the KEYSTONE button  
KEYSTONE  
1
As illustrated on the right, a dialog will appear  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
on the screen to aid you in correcting the  
distortion.  
ASPECT  
BLANK  
VOLUME  
KEYSTONE  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
OFF  
16  
FREEZE  
KEYSTONE  
POSITION  
MENU  
Use the  
,
buttons to select the  
2
3
direction of distortion to correct (  
/
)
ENTER  
ESC  
RESET  
Use the  
distortion  
,
buttons to correct the  
Press the KEYSTONE button again to close the dialog and  
complete this operation. (Even if you don't do anything, the  
dialog will automatically disappear after a few seconds.)  
NOTE  
This function may not be work well with some types of input signals.  
The adjustable range for correcting keystone distortions will vary with the type of  
input signal.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MAGNIFY FEATURE  
Press the MAGNIFY (ON) button  
MAGNIFY  
1
The projector enters MAGNIFY mode.  
ON  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
Press the POSITION button, then use the  
,
,
2
PAGE DOWN  
MUTE  
,
buttons to select the area to enlarge and then  
OFF  
press the POSITION button again to confirm your  
selection  
FREEZE  
KEYSTONE  
POSITION  
POSITION  
POSITION  
MENU  
ENTER  
ESC  
RESET  
Press the  
,
buttons to zoom in and  
3
out of the selected area.  
Press the MAGNIFY (OFF) button to exit MAGNIFY mode  
and restore the screen to normal. (The projector will also  
automatically exit MAGNIFY mode if there is a change in the  
input signal's state.)  
NOTE  
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT,  
AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.  
FREEZING THE SCREEN  
Press the FREEZE button  
MAGNIFY  
ON  
HOME  
PAGE UP  
VOLUME  
1
FREEZE  
The [II] icon appears and the screen will freeze at  
the current image. Press the FREEZE button again  
and the [ ] appears as the projector exits FREEZE  
mode.  
END  
PAGE DOWN  
MUTE  
OFF  
FREEZE  
KEYSTONE  
POSITION  
MENU  
NOTE  
The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO,  
BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.  
If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),  
the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SIGNAL SEARCHING  
Press the SEARCH button  
1
When you press the SEARCH button, the projector begins  
searching for input signals. If it detects an input signal, the  
search will cease and the projector will project the detected  
signal. If the projector is unable to find an input signal at any of  
its ports, it will return to the state it was in prior to the search.  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
OFF  
SEARCH  
RGB IN 1  
RGB IN 2  
VIDEO IN  
FREEZE  
KEYSTONE  
S-VIDEO IN  
COMPONENT VIDEO  
SELECTING THE ASPECT RATIO  
Press the ASPECT button  
1
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
ASPECT  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
RGB IN 1, RGB IN 2, COMPONENT VIDEO  
(HDTV signals : 1125i (1035i/1080i), 750p)  
OFF  
FREEZE  
KEYSTONE  
4:3  
16:9  
VIDEO IN, S-VIDEO IN, COMPONENT VIDEO  
POSITION  
MENU  
(Non-HDTV signals : 525i, 525p,625i)  
ENTER  
4:3  
16:9  
SMALL  
ESC  
RESET  
TEMPORARILY BLANKING THE SCREEN  
Press the BLANK button  
1
The input signal screen is shut off, and a blank screen  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
appears. You can set the blank screen using the menu  
(from the SCREEN menu, select BLANK). Press the BLANK  
button again to remove the blank screen, and return to the  
input signal screen.  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
OFF  
FREEZE  
KEYSTONE  
BLANK  
POSITION  
MENU  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MENU FUNCTIONS  
MENU  
Press the MENU button  
1
The menu display appears on the screen. The  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
projector has the following menus: MAIN,  
PICTURE-1, PICTURE-2, INPUT, SCREEN, and  
ASPECT  
BLANK  
VOLUME  
OPTION. Select a menu using the  
/
buttons. The  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
current settings of the items that can be manipulated via the  
selected menu appear.  
PAGE DOWN  
MUTE  
OFF  
FREEZE  
KEYSTONE  
/
Select a menu using the  
buttons,  
2
then press the  
or ENTER button.  
POSITION  
MENU  
The display of the selected menu appears.  
ENTER  
[ex. Adjusting SHARPNESS]  
Use the  
the  
/
buttons to select PICTURE-1, then press  
ESC  
RESET  
or ENTER button.  
MENU  
MAIN  
COLOR BAL R  
COLOR BAL B  
SHARPNESS  
COLOR  
1  
+1  
1  
+1  
1  
PICTURE-1  
PICTURE-2  
INPUT  
SCREEN  
OPTION  
TINT  
ENTER  
: SELECT  
/
Select an item using the  
or ENTER button.  
buttons, then press the  
3
The operation display of the selected item appears. To adjust a numerical value,  
press the  
or ENTER button again to switch to the single menu (small display  
showing only the operation display area).  
[ex. Adjusting SHARPNESS]  
Use the  
press the  
/
buttons to select SHARPNESS, then  
or ENTER button.  
MENU  
MAIN  
COLOR BAL R  
COLOR BAL B  
SHARPNESS  
COLOR  
PICTURE-1  
PICTURE-2  
INPUT  
SCREEN  
OPTION  
TINT  
ENTER  
0
: SELECT  
/
Press the  
buttons to adjust the level.  
4
Press the MENU button to hide the menu and finish your operation. Alternatively,  
press the  
[ex. Adjusting SHARPNESS]  
Use the buttons to adjust the SHARPNESS.  
or ESC button to return to the previous display.  
/
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING THE PC SCREEN  
You can use the remote control as a simplified mouse or keyboard.  
CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.  
Only connect to a PC.  
Before connecting, read the manuals of the device you will connect.  
Do not unplug the connector cables while the computer is operating.  
PS/2, ADB, Serial Mouse Control  
STANDBY/ON  
VIDEO  
RGB  
SEARCH  
AUTO  
1. Turn off the projector and PC power, and connect the projectors  
CONTROL terminal to the computer via the mouse cable.  
2. If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control  
function is given priority, and mouse control from the CONTROL terminal will not function.  
3. Turn on the projector power, then the computer.  
ASPECT  
BLANK  
VOLUME  
MAGNIFY  
ON  
HOME  
END  
PAGE UP  
PAGE DOWN  
MUTE  
The functions in the table below can be controlled. If you have difficulty with control,  
restart the computer (either from the software or by pressing the restart button).  
OFF  
FREEZE  
KEYSTONE  
Available Functions  
Remote Control Operation  
Move Pointer  
Use  
buttons  
POSITION  
MENU  
Left click with mouse  
Right click with mouse  
Press ENTER button  
Press RESET button  
ENTER  
ESC  
RESET  
USB Mouse/Keyboard Control  
1. Connect the projectors USB terminal to the computer using a USB cable.  
The functions in the table below can be controlled.  
Available Functions  
Remote Control Operation  
Move Pointer  
Use  
buttons  
Left click with mouse  
Press ENTER button  
Press RESET button  
Press HOME button  
Press END button  
Right click with mouse  
Press keyboards HOME key  
Press keyboards END key  
Press keyboards PAGE UP key  
Press keyboards PAGE DOWN key  
Press keyboards ESC key  
Press PAGE UP button  
Press PAGE DOWN button  
Press ESC button  
NOTES  
It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g.  
track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and  
select external mouse, and disable the pointing devices. In addition, the mouse may not function if the  
computer does not have the needed utility program. See your computers hardware manual for details.  
The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to  
use the remote control, depending on the computers configurations and mouse drivers.  
The USB control can only be used for the functions listed above. You cannot do things like press two buttons  
at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).  
This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and  
display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE LAMP  
HIGH VOLTAGE  
HIGH TEMPERATURE  
HIGH PRESSURE  
Before replacing the lamp, check the serial number of the replacement lamp bulb (sold separately)  
then contact your local dealer. Before replacing the lamp, turn off the power, and unplug the power  
cord, then wait at least 45 minutes, in order to ensure that the lamp is properly cooled.  
Removing the lamp bulb while it is still hot could cause burns, or cause the lamp bulb to burst.  
The LCD projector uses a glass lamp bulb. It is a mercury lamp with high  
WARNING  
internal pressure. High-pressure mercury lamps can break with a loud  
bang, or burn out, if jolted or scratched, or through wear over time. Each lamp has a  
different lifetime, and some may burst or burn out soon after you start using them. In  
addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing,  
and for gas containing mercury to escape from the projectors vent holes.  
Handle with care: jolting or scratching could cause the lamp bulb to burst during use.  
7
If the replace lamp indicator (see "Related Messages" (Vol.2  
) and "Regarding the  
8
indicator Lamps" (Vol.2  
)) comes on, replace the lamp as soon as possible. Using the  
lamp for long periods of time, or past the replacement date, could cause it to burst. Do  
not use old (used) lamps; this is a cause of breakage.  
If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems  
elsewhere besides the lamp. If this happens, contact your local dealer.  
If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make  
sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth.  
If the lamp should break (it will make a loud bang when it does), unplug the power cord from  
the outlet, and make sure to request a replacement lamp from your local dealer. Note that  
shards of glass could damage the projectors internals, or cause injury during handling, so  
please do not try to clean the projector or replace the lamp yourself.  
Obey local ordinances when disposing of used lamps. In most cases, it is possible to dispose of used  
bulbs in the same manner as used glass bottles, but in some cases, bulbs are sorted separately.  
Do not use the projector with the lamp cover removed.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE LAMP (continued)  
Replacing the lamp  
All projector lamps will wear out eventually. If used for long periods of time, the image could become  
darkened, and the color contrast could be impacted as well. We recommend that you replace your lamps  
early. If the LAMP indicator turns red, or a message prompts you to replace the lamp when you power up  
the projector, the lamp needs to be replaced. (See "Related Messages" (Vol.2  
Indicator Lamps" (Vol.2 ) for details.)  
7
) and "Regarding the  
8
Turn off the projector, and unplug the  
power cord. Allow the lamp bulb to cool  
for at least 45 minutes, and prepare a  
new lamp.  
Insert the new lamp, and tighten the 1  
screw firmly to lock it in place  
1
5
Also steadily push the opposite side of the  
screwed side of the  
lamp into the unit.  
After making sure that the projector has  
cooled adequately, slowly flip over the  
projector, so that the bottom is facing up  
2
3
Replace the lamp cover, and tighten  
the 2 screws firmly to lock it in  
place  
Unscrew the 2  
screws, and  
remove the  
lamp cover  
6
Unscrew the 1 screw, and slowly pull  
out the lamp by the handle  
4
Slowly turn the projector so that  
the top is facing up  
Be careful not to touch the inside of the lamp case.  
7
8
Turn on the projector power, and using  
the menu, reset the lamp timer  
To reset the lamp timer, from the OPTION  
menu, select LAMP TIME.  
ATTENTION Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.  
Do not use with lamp cover removed.  
Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing  
the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.  
When the lamp has been replaced after the message of "CHANGE THE LAMP ...THE POWER  
WILL TURN OFF AFTER 0 hr." is displayed, or the LAMP indicator is red, complete the following  
operation within 10 minutes of switching power ON.  
NOTE  
The LAMP indicator is also red when the lamp unit reaches high temperature.  
Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power  
ON again. If the LAMP indicator is still red, replace the lamp.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE AIR FILTER  
Caring for the air filter  
The air filter should be cleaned about every 100 hours. If the LAMP indicator and  
TEMP indicator blink red simultaneously, or a message prompts you to clean the air  
filter when you turn on the unit, the filter needs to be cleaned. (See "Related  
7
8
Messages" (Vol.2  
) and "Regarding the Indicator Lamps" (Vol.2  
) for details.)  
Turn off the projector, and unplug the power cord  
1
2
Apply a vacuum cleaner to  
the top of the air filter cover  
to clean the air filter  
Air Filter Cover  
Turn on the projector, and use the menu to reset the filter  
timer  
3
To reset the air filter timer, from the OPTION menu, select FILTER TIME.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE AIR FILTER (continued)  
Replacing the air filter  
If the soiling will not come off the air filter, or it becomes damaged, then it needs to be  
replaced. Please contact your local dealer, after confirming the model of your  
10  
separately sold replacement air filter. (See "Optional Parts" on Vol.2  
.)  
Turn off the projector, and unplug the power cord. Prepare a  
new air filter (one specified for your projector)  
1
2
Remove the air filter cover and air filter  
Insert the new filter, and replace the  
filter cover  
3
4
Turn on the projector power, and using the menu, reset the  
filter timer  
To reset the lamp timer, from the OPTION menu, select FILTER TIME.  
ATTENTION Make sure to turn off the power and unplug the power cord before caring for  
the unit. Please carefully read "Safety Instructions", in order to care for your projector correctly.  
Do not use with air filter cover removed.  
If the air filter becomes clogged by dust or the like, internal temperature rises and could cause  
malfunction. The power is automatically turned off in order to prevent the unit from overheating  
internally.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER CARE  
Caring for the inside of the projector :  
In order to ensure the safe use of your projector, please have it cleaned and inspected by  
your local dealer about once every 2 years. Never try to care for the inside of the unit  
yourself. Doing so is dangerous.  
Caring for the lens :  
Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the  
lens directly with your hand.  
Caring for the cabinet and remote control transmitter :  
Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a  
neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly  
with a soft, dry cloth.  
ATTENTION Make sure to turn off the power and unplug the power cord before caring for  
the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector  
correctly.  
Do not use cleaners or chemicals other than those listed above, including benzene and paint  
thinner.  
Do not use aerosols or sprays.  
Do not polish or wipe with hard objects.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD Projector CP-322i  
USER'S MANUAL Vol.2 (Extended)  
Thank you for purchasing this projector.  
WARNING • Please read the accompanying manual “SAFETY  
INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct  
usage through understanding. After reading, store this instruction manual in a  
safe place for future reference.  
NOTE  
• The information in this manual is subject to change without notice.  
• The manufacturer assumes no responsibility for any errors that may appear in this manual  
• The reproduction, transmission or use of this document or contents is not permitted without express  
written authority.  
TRADEMARK ACKNOWLEDGEMENT :  
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.  
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.  
• VESA and SVGA are trademarks of the Video Electronics Standard Association.  
• Windows is a registered trademark of Microsoft Corporation.  
• All other trademarks are the property of their respective owners.  
CONTENTS  
Page  
MULTIFUNCTIONAL SETTINGS ........................................................................2  
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED ......7  
SPECIFICATIONS .............................................................................................10  
WARRANTY AND AFTER-SERVICE................................................................11  
.......................................................................................  
For "TECHNICAL" see the end of this manual.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
MULTIFUNCTIONAL SETTINGS  
This device has 6 separate menus: MAIN, PICTURE 1, PICTURE 2, INPUT,  
SCREEN, OPTION. Each of these menus is operated using the same methods.  
The basic operations of these menus are as follows.  
Menu screen display : Press the "MENU" button.  
Menu selection  
: Choose a menu name using the  
/
button, and press the  
button or the ENTER button.  
Item selection  
: Choose an item using the  
button or the ENTER button.  
/
button, and press the  
Return menu to last previous screen: Press the  
button or the ESC button.  
Execution of settings and/or adjustments Operate by using the  
:
/
button. (For further  
details, read the explanation for each separate menu.)  
I
nitialization of settings and/or adjustments: During operation, press the RESET button.  
(Note that items whose functions are  
performed simultaneously with the operation  
of clock phase, language selection, automatic  
adjustment, etc., cannot be initialized.)  
End menu operations: Press the MENU button, or do not perform any operation for  
several seconds.  
MENU  
MAIN  
BRIGHT  
CONTRAST  
ASPECT  
PICT. POSIT.  
GAMMA  
MIRROR  
MAIN Menu  
PICTURE-1  
PICTURE-2  
INPUT  
SCREEN  
OPTION  
With the MAIN menu, the seven items shown in the Table below can be  
performed.  
LANGUAGE  
12  
Perform each operation in accordance with the instructions in the Table.  
: SELECT  
Example : MAIN Menu  
(BRIGHT)  
MAIN Menu  
Item  
Description  
BRIGHT  
Adjust Brightness: Light  
Dark  
CONTRAST  
Adjust Contrast: Strong  
Weak  
Select Aspect Ratio:  
At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO  
Input:  
ASPECT  
4:3  
At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:  
4:3 16:9 SMALL  
16:9  
• The SMALL picture may not be displayed correctly with certain input signals.  
Select Picture Position (for 16:9/SMALL Picture):  
PICT.POSIT.  
GAMMA  
TOP  
CENTER  
BOTTOM  
DYNAMIC  
V:INVERT  
Select Gamma Mode:  
NORMAL CINEMA  
Select Mirror Status:  
NORMAL H:INVERT  
MIRROR  
H&V:INVERT  
Select Menu Language:  
ENGLISH  
FRANÇAIS  
DEUTSCH  
ESPAÑOL  
LANGUAGE  
ITALIANO  
NORSK  
NEDERLANDS  
日本語  
POTUGUÊS  
中文  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU  
MAIN  
COLOR BAL R  
COLOR BAL B  
SHARPNESS  
COLOR  
PICTURE 1 Menu  
PICTURE-1  
PICTURE-2  
INPUT  
SCREEN  
OPTION  
TINT  
With the PICTURE 1 menu, the five items shown in the Table  
below can be performed.  
Perform each operation in accordance with the instructions in the  
Table.  
12  
: SELECT  
Example : PICTURE1 Menu  
(COLOR BAL R)  
PICTURE1 Menu  
Item  
Description  
Adjust Red Color Balance: Dark  
Adjust Blue Color Balance: Dark  
Adjust Sharpness (for VIDEO/S-VIDEO): Clear  
Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):  
COLOR BAL R  
Light  
Light  
COLOR BAL B  
SHARPNESS  
Soft  
COLOR  
TINT  
Dark Light  
Adjust Tint (for VIDEO/S-VIDEO): Green  
Red  
MENU  
MAIN  
V POSITION  
PICTURE 2 Menu  
PICTURE-1  
PICTURE-2  
INPUT  
H POSITION  
H PHASE  
H SIZE  
SCREEN  
OPTION  
OVER SCAN  
With the PICTURE 2 menu, the five items shown in the Table  
below can be performed.  
Perform each operation in accordance with the instructions in the  
Table.  
12  
: SELECT  
Example : PICTURE2 Menu  
(V POSITION)  
PICTURE2 Menu  
Item  
Description  
Adjust Vertical Position (for RGB): Up  
Adjust Horizontal Position (for RGB): Left  
Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):  
V POSITION  
H POSITION  
Down  
Right  
H PHASE  
H SIZE  
Right Left  
• Adjust to eliminate flicker.  
Adjust Horizontal Size (for RGB): Large  
• If the horizontal size adjustment is excessive, the image may not be displayed  
correctly. In such a case, initialize H SIZE with the RESET button.  
Small  
Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):  
LARGE  
MIDDLE  
SMALL  
OVER SCAN  
• It is recommended to select SMALL to avoid flicker at the lower part of the  
picture.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
MULTIFUNCTIONAL SETTINGS (continued)  
MENU  
MAIN  
PICTURE-1  
PICTURE-2  
INPUT  
AUTO  
VIDEO  
HDTV  
SYNC ON G  
EXECUTE  
INPUT Menu  
SCREEN  
OPTION  
With the INPUT menu, the four items shown in the Table below can be  
performed. With inputting of RGB IN 1 and RGB IN 2 signals, the  
horizontal and vertical frequencies of the signals will be displayed on the  
: SELECT  
Example : INPUT Menu  
(AUTO)  
initial screen of the INPUT menu.  
Perform each operation in accordance with the instructions in the Table.  
INPUT Menu  
Item  
Description  
Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H  
PHASE, and H SIZE. Use this function with the maximum window size.  
Auto Adjust (for VIDEO/S-VIDEO): Automatically selects the proper VIDEO  
mode for the current input signal. This function is active only when the AUTO  
mode is selected for the item VIDEO. Refer to the description for the item  
VIDEO below.  
AUTO  
• This function may not be available with a PAL60 signal and certain other  
signals.  
• The AUTO mode operation requires approximately 10 seconds.  
• For COMPONENT VIDEO, the signal type is identified automatically even if  
this function is inactive. For a HDTV signal, refer to the item HDTV below.  
Select Mode of Signal Type (for VIDEO/S-VIDEO):  
AUTO  
NTSC  
M-PAL  
PAL  
SECAM  
NTSC4.43  
N-PAL  
Selecting AUTO mode activates and performs the AUTO function for VIDEO/S-  
VIDEO. It automatically selects the proper mode from among those above.  
Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g.  
The image becomes irregular, or lacks color.)  
VIDEO  
• AUTO mode may not function correctly with a PAL60 signal and certain other  
signals.  
• The AUTO mode operation requires approximately 10 seconds.  
• For COMPONENT VIDEO, the signal type is identified automatically even if  
this function is inactive. For a HDTV signal, refer to the item HDTV below.  
Select HDTV Signal Mode:  
1080i  
1035i  
HDTV  
• If the selected HDTV mode is incompatible with the input signal, the picture  
may be distorted.  
On/Off SYNC ON G Mode:  
TURN ON  
TURN OFF  
Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode  
allows reception of SYNC on G.  
SYNC ON G  
• In the SYNC ON G mode, the picture may be distorted with certain input  
signals. In such a case, remove the signal connector so that no signal is  
received and turn SYNC ON G off, and then reconnect the signal.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU  
MAIN  
BLANK  
START UP  
MyScreen  
MyScreen Size  
MyScreen Lock  
MyScreen  
ORIGNAL  
SCREEN Menu  
PICTURE-1  
PICTURE-2  
INPUT  
SCREEN  
OPTION  
With the SCREEN menu, the five items shown in the Table below can be performed.  
Please perform each operation in accordance with the instructions in the Table.  
: SELECT  
Example : SCREEN Menu  
(BLANK)  
SCREEN Menu  
Item  
Description  
Selection of BLANK Screen:  
MyScreen  
ORIGINAL  
.
.
.
.
.
.
The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen  
has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the  
Temporarily Blanking the Screen” section of the separate booklet, Vol. 1 (Basic)).  
MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen  
(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.  
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).  
Option screens: Various colored non-patterned (plain) screens displayed within the Menus.  
• The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color  
screen several minutes after being displayed.  
BLANK  
Selection of START UP Screen:  
MyScreen  
ORIGINAL  
TURN OFF  
The START UP Screen may be voluntarily selected. The START UP Screen is displayed when  
no signal has been inputted, or when spec signals are being inputted.  
MyScreen: Using the MyScreen category (see this Table, below), one can register a  
desired screen (or screens). At the time of factory shipment, this is set as a non-patterned  
(plain) blue color screen.  
START UP  
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).  
TURN OFF: A non-patterned (plain) blue color screen.  
The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen several  
minutes after being displayed.  
Registration of MyScreen:  
When this item is executed, the MyScreen Menu for registration of MyScreen for the BLANK Screen  
and the START UP Screen is displayed. When operations are performed in accordance with this Menu,  
one can “cut” and register desired screens from among the received images within the display.  
1. After the “Do you start capturing this picture?” message has been displayed, pressing the ESC (or  
RESET) button interrupts execution of the MyScreen. When the ENTER button is pressed, the  
picture becomes static (no longer moves), and a frame for picture cutting, as well as the message  
that follows below, appear. Please press the button when the screen you want to register is  
currently being displayed.  
MyScreen  
2. When the “Move the capture area as you want.” message has been displayed, pressing the ESC (or RESET)  
button will eliminate the static state of the picture, and operations can be performed again from operation 1.  
The frame can be moved using the  
,
,
,
buttons. After designating the screen  
you want to register, pressing the ENTER button will initiate screen registration. The registration  
process takes approximately 1 minute to complete.  
3. When the registration has been completed, the screen of the registered MyScreen, plus the  
message, “MyScreen registration is finished,” will be displayed for several seconds, after which  
the operation is terminated.  
Selection of MyScreen display size:  
MyScreen Size  
MyScreen Lock  
x1  
FULL  
Invalidation of MyScreen registration function:  
TURN ON  
TURN OFF  
When TURN ON is selected, the MyScreen category (see this Table, above) cannot be executed; in  
this way, one can prohibit rewrites (“writeovers”) of the MyScreen.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
MULTIFUNCTIONAL SETTINGS (continued)  
MENU  
MAIN  
PICTURE-1  
PICTURE-2  
INPUT  
SCREEN  
OPTION  
VOLUME  
OPTION Menu  
AUTO OFF  
WHISPER  
LAMP TIME  
FILTER TIME  
With the OPTION menu, the five items shown in the Table below  
can be performed.  
Please perform each operation in accordance with the instructions  
in the Table.  
12  
: SELECT  
Example : OPTION Menu  
(VOLUME)  
OPTION Menu  
Item  
Description  
VOLUME  
Adjust Volume: High  
Low  
Adjust AUTO OFF Time:  
Long (MAX. 99 min.)  
Short (Min. 1 min.)  
(DISABLE: 0 min.)  
AUTO OFF  
WHISPER  
The system automatically enters the standby mode if no signal is received  
within the set time. This function is inactive when DISABLE (0 min.) is selected.  
Select WHISPER Mode:  
NORMAL  
WHISPER  
When WHISPER is selected the WHISPER mode is activated. In the WHISPER  
mode, acoustic noise and screen brightness are reduced.  
Refer to LAMP TIME: When set, this function displays the total time the  
projector lamp has been used since new.  
Reset LAMP TIME [Use this function only when the lamp has been replaced!]:  
Depress the RESET button for at least 3 seconds while lamp time is being  
displayed. The reset menu will then appear. After you replace the lamp with a  
LAMP TIME  
new lamp, select RESET on the menu with the  
button.  
• Do not reset the lamp time unless you have replaced the lamp. And, always  
reset the lamp time when replacing the lamp. The message functions will not  
operate properly if the lamp time is not reset correctly.  
• Before replacing the lamp, carefully read the descriptions headed "THE  
LAMP".  
Refer to FILTER TIME: This function displays the total time the air-filter has  
been used since new.  
Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:  
Depress the RESET button for at least 3 seconds while lamp time is being  
displayed. The reset menu will then appear. After you replace the filter, select  
FILTER TIME  
RESET on the menu with the  
DEFAULT CANCEL  
button.  
• Do not reset the filter time unless you have cleaned or replaced the filter. And,  
always reset the filter time when cleaning or replacing the filter. The message  
functions will not operate properly if the filter time is not reset correctly.  
Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED  
Related Messages  
When the unit's power is ON, messages such as those shown below may be displayed. When  
any such message is displayed on the screen, please respond as described below.  
Message  
Description  
CHANGE THE LAMP  
Lamp usage time is approaching 2,000 hours. (Note 2)  
Preparation of a new lamp, and an early lamp change, is  
recommended. After you have changed the lamp, please be  
sure to reset the lamp timer.  
AFTER REPLACING LAMP,  
RESET THE LAMP TIMER.  
(Note 1)  
Lamp usage time is approaching 2,000 hours. A lamp change  
within ** hours is recommended. (Note 2)  
When lamp usage reaches 2,000 hours, the power will  
automatically be turned OFF. Please change the lamp by  
referring to “THE LAMP” in Vol.1 (Basic). After you have  
changed the lamp, please be sure to reset the lamp  
timer.  
CHANGE THE LAMP  
AFTER REPLACING LAMP,  
RESET THE LAMP TIMER.  
THE POWER WILL TURN OFF  
AFTER ** hr.  
(Note 1)  
As lamp use has reached 2,000 hours, the power will soon be  
automatically turned OFF. (Note 2)  
CHANGE THE LAMP  
Please immediately turn the power OFF, and follow the  
instructions in the “THE LAMP” section of the separate booklet,  
Vol.1 (Basic).  
After you have changed the lamp, please be sure to reset the  
lamp timer.  
AFTER REPLACING LAMP,  
RESET THE LAMP TIMER.  
THE POWER WILL TURN OFF  
AFTER 0 hr.  
A note of precaution when cleaning the air filter.  
After cleaning the filter, operate FILTER TIME of the OPTION  
Menu, and perform reset of the filter timer.  
CLEAN THE AIR FILTER  
AFTER CLEANING AIR FILTER,  
RESET THE FILTER TIMER.  
There is no input signal.  
Please confirm the signal input connection, and the status of the  
signal source.  
NO INPUT IS DETECTED  
ON ***  
The horizontal or vertical wavelength of the inputted signal is  
outside of the response parameters of this unit. Please confirm  
the specs for this unit or the signal source specs.  
SYNC IS OUT OF RANGE  
fH  
fV  
ON **  
***** kHz  
***** Hz  
The internal portion temperature is rising. Please turn the power  
OFF, and allow the unit to cool down for approximately 20  
minutes. After having confirmed the following items, then please  
resent the power to ON.  
CHECK THE AIR FLOW  
Is there blockage of the air passage aperture?  
Is the air filter dirty?  
Does the peripheral temperature exceed 35°C?  
NOTES  
Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be  
reappeared every time the power is turned ON.  
Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of  
usage, a lamp will no longer light up, or the lamp will break or burst, etc. This unit is equipped  
with an automatic shut-down function, such that the power will automatically be turned OFF  
when lamp usage time has reached 2,000 hours. Please be aware, however, that among lamp  
types, there are major differences in product lifetimes; a lamp may thus fail to light even prior  
to the functioning of the automatic shut-down function of this unit.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Regarding the Indicator Lamps  
Lighting and flashing of the POWER indicator, the LAMP indicator, and the  
TEMP indicator have the meanings as described in the Table below.  
Please respond in accordance with the instructions within the Table.  
POWER  
LAMP  
TEMP  
Description  
indicator indicator indicator  
The orange  
Turned OFF Turned OFF  
The STANDBY mode is set  
lamp is lighted (Not lighted) (Not lighted)  
Flashing of the green lamp  
The green lamp is lighted  
Flashing of the orange lamp  
Turned OFF  
Turned OFF  
Turned OFF  
Turned OFF  
Turned OFF  
Turned OFF  
The unit is warming up. Please wait.  
The unit is in an ON state. Ordinary operations may be performed.  
The unit is cooling down. Please wait.  
The unit is cooling down. Please wait.  
Blinking of the  
red lamp  
A certain error has been detected. Wait until the POWER indicator lamp has finished  
flashing, and then perform the proper response measure using the item descriptions  
below as reference.  
-
-
The lamp does not light.  
There is a possibility that the interior portion has become heated. Turn the power OFF and wait  
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not  
there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or  
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,  
turn the power ON again; if the same display is displayed, then please change the lamp.  
The red lamp  
is lighted, or  
blinks  
The red lamp  
is lighted  
Turned  
OFF  
Either there is no lamp and/or lamp cover, or either of these has not been properly fixed  
(attached). Turn the power OFF and wait approximately 45 minutes. After the main unit has  
sufficiently cooled down, please make confirmation of the attachment state of the lamp and  
lamp cover. After performing any needed maintenance, turn the power ON again; if the same  
display is displayed, then please contact a sales store or a service company.  
The red lamp  
is lighted, or  
blinks  
Blinking of the  
red lamp  
Turned  
OFF  
The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the  
main unit has cooled down, please make confirmation that no foreign matter has become caught in  
the fan, etc. After performing any needed maintenance, turn the power ON again; if the same display  
is displayed, then please contact a sales store or a service company.  
The red lamp  
is lighted, or  
blinks  
Blinking of the  
red lamp  
Turned  
OFF  
There is a possibility that the interior portion has become heated. Turn the power OFF and wait  
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not  
there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or  
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,  
turn the power ON again; if the same display is displayed, then please contact a sales store or a  
service company.  
The red lamp is  
lighted, or  
blinks  
The red lamp is  
lighted  
Turned  
OFF  
There is a possibility that the interior portion has become overcooled. Please use the unit within  
the usage temperature parameters (0°C to 35°C). After performing any needed maintenance,  
turn the power ON again; if the same display is displayed, then please contact a sales store or a  
service company.  
The green lamp  
is lighted  
Alternative blinking  
with the red lamp  
This is a notification that it is time to clean the filter.  
After cleaning the filter, operate the FILTER TIME portion of the OPTION Menu, and perform  
reset of the FILTER TIME.  
The green  
Simultaneous blinking  
with the red lamp  
lamp is lighted  
NOTE  
When the interior portion has become overheated, for safety purposes, the power source is automatically turned OFF,  
and the indicator lamps may also be turned OFF. Press the ” (power OFF) side of the main power switch, and wait  
for approximately 20 minutes. Please then use the unit only after having first confirmed that the unit has sufficiently  
cooled down.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued)  
Phenomena That May Easily Be Mistaken for Machine Defects  
Before requesting repair, check in accordance with the following chart.  
If the situation cannot be corrected, then contact your dealer.  
Reference  
Page(s)  
Phenomenon  
Cases not involving a machine defect  
Items to be confirmed  
The main power source is not ON.  
Turn on the main power.  
Vol.1-3, 14  
The electrical power cord is not plugged in.  
Correctly connect the power cord.  
Be sure to press the “  
of the main power switch, and leave this OFF  
interrupted during operation, such as by for approximately 20 minutes. After the unit  
O” (power OFF) side  
Power does not  
come ON  
The main power source has been  
Vol.1-14  
a power outage (blackout), etc.  
has sufficiently cooled down, turn ON the  
power source.  
The input changeover settings  
are mismatched.  
Select the input signal, and  
correct the settings.  
Vol.1-15  
Vol.1-10, 11  
Vol.1-10, 11  
Vol.1-17  
Vol.1-17  
Vol.1-10, 11  
Vol.2-2  
No sound or  
pictures are  
outputted  
No signal is being inputted.  
Correctly connect the connection cord.  
Correctly connect the connection cord.  
Adjust the VOLUME setting to a higher level.  
The electrical wiring to this unit  
is not correctly connected.  
Pictures are  
displayed, but no  
sounds are heard  
The volume setting has been set at (or  
adjusted to) an extremely low level.  
Press the MUTE button to release  
(change) the MUTE mode setting.  
The MUTE mode is the current setting.  
The electrical wiring to this unit  
is not correctly connected.  
Correctly connect the connection cord.  
Sounds are  
heard, but no  
pictures are  
displayed  
The brightness setting has been set at Adjust the BRIGHT setting to a  
(or adjusted to) an extremely low level.  
brighter level.  
The lens cap has not been removed.  
Remove the lens cap.  
Vol.1-14  
Colors have a faded-  
out appearance  
Color tone is poor  
Perform picture adjustments by changing the  
COLOR BAL R, the COLOR BAL B, and/or the  
TINT settings, etc.  
Color depth setting or color tone setting  
Vol.2-3  
The brightness setting and/or contrast  
setting has not been properly adjusted.  
Perform picture adjustments by changing the  
BRIGHT and/or CONTRAST settings, etc.  
Vol.2-2  
Vol.2-6  
The WHISPER mode is the current Change (by releasing) from the  
setting. WHISPER mode.  
Pictures appear  
dark  
Lamp is approaching the end of its Exchange the old lamp with a new  
Vol.1-25, 26  
product lifetime.  
Pictures appear Either the FOCUS setting or the H  
PHASE is not properly adjusted.  
lamp.  
Vol.1-15  
Vol.2-3  
Adjust the FOCUS and H PHASE settings.  
blurry  
NOTE  
Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and  
such do not constitute or imply a machine defect.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
TECHNICAL  
SIGNAL CONNECTOR PIN ASSIGNMENT  
RGB IN [1]/[2]  
RGB OUT  
S-VIDEO  
D-sub 15-pin Shrink  
Mini Din 4-pin  
Mini Din 4-pin  
Pin No  
Signal  
Video input Red  
Video input Green  
Video input Blue  
-
Pin No  
9
Signal  
-
Pin No Signal  
Color:  
1
2
3
4
5
6
7
8
10  
Ground  
0.286Vp-p (NTSC, burst signal),  
75terminator  
0.3Vp-p (PAL/SECAM, burst signal),  
75terminator  
Brightness:  
1.0Vp-p, 75terminator  
11  
-
1
RGB IN [1]: SDA (DDC)  
Ground  
12  
RGB IN [2]:  
RGB OUT :  
-
-
Ground Red  
Ground Green  
Ground Blue  
2
13  
14  
H. sync./ Composite sync.  
Vertical sync  
3
4
Ground  
Ground  
RGB IN [1]: SCL (DDC)  
RGB IN [2]:  
RGB OUT :  
-
-
15  
signal  
Terminal  
Specification  
Video: Analog 0.7Vp-p, 75terminator (positive)  
H/V. sync.: TTL level (positive/negative)  
Composite sync.: TTL level  
RGB signal  
input  
RGB IN12)  
D-sub 15-pin shrink jack  
VIDEO IN  
1.0Vp-p, 75terminator, RCA jack  
Brightness signal: 1.0Vp-p, 75terminator  
Color signal: 0.286Vp-p (NTSC, burst signal),75terminator  
0.300Vp-p (PAL/SECAM, burst signal),75terminator  
Mini DIN 4-pin jack  
S-VIDEO IN  
Video signal  
input  
Y
1.0 Vp-p, 75 Terminator (Positive)  
COMPONENT  
VIDEO  
CB/PB 0.7 Vp-p, 75 Terminator (Positive)  
CR/PR 0.7 Vp-p, 75 Terminator (Positive)  
Audio  
signal input  
200mVrms, 50 k(max. 3.0Vp-p)  
RCA jack  
AUDIO INRL)  
Video: Analog 0.7Vp-p, 75output impedance (positive)  
H/V. sync.: TTL level (positive/negative)  
Composite sync.: TTL level  
Signal output  
RGB OUT  
D-sub 15-pin shrink jack  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXAMPLE OF COMPUTER SIGNAL  
Display mode  
CP-S318  
Resolution  
fH (kHz)  
fV (Hz)  
Rating  
Signal mode  
H × V  
CP-X328  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
720 × 400  
640 × 480  
640 × 480  
640 × 480  
640 × 480  
640 × 480  
800 × 600  
800 × 600  
800 × 600  
800 × 600  
800 × 600  
832 × 624  
1024 × 768  
1024 × 768  
1024 × 768  
1024 × 768  
1152 × 864  
1280 × 960  
1280 × 1024  
1280 × 1024  
37.9  
31.5  
35.0  
37.9  
37.5  
43.3  
35.2  
37.9  
48.1  
46.9  
53.7  
49.7  
48.4  
56.5  
60.0  
68.7  
67.5  
60.0  
64.0  
80.0  
85.0  
59.9  
66.7  
72.8  
75.0  
85.0  
56.3  
60.3  
72.2  
75.0  
85.1  
74.5  
60.0  
70.1  
75.0  
85.0  
75.0  
60.0  
60.0  
75.0  
VESA  
VESA  
TEXT  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
Zoom in  
VGA (60Hz)  
Mac13"mode  
VGA (72Hz)  
VGA (75Hz)  
VGA (85Hz)  
SVGA (56Hz)  
SVGA (60Hz)  
SVGA (72Hz)  
SVGA (75Hz)  
SVGA (85Hz)  
Mac16"mode  
XGA (60Hz)  
XGA (70Hz)  
XGA (75Hz)  
XGA (85Hz)  
SXGA (75Hz)  
SXGA (60Hz)  
SXGA (60Hz)  
SXGA (75Hz)  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
Zoom out  
1280 × 1024  
1600 × 1200  
91.2  
75.0  
85.0  
60.0  
VESA  
VESA  
SXGA (85Hz)  
UXGA (60Hz)  
Zoom out  
Zoom out  
Zoom out  
NOTE Some computers may have multiple display screen modes. Use of some  
of these modes will not be possible with this projector.  
• Be sure to check jack type, signal level, timing and resolution before connecting this  
projector to a computer.  
• Depending on the input signal, full-size display may not be possible in some cases.  
Refer to the number of display pixels above.  
• This projector will display up to UXGA (1600X1200) resolution signals but the image  
will be rescaled to the native resolution of the projector. Best display performance is  
achieved when the signal input resolution is the same as the native resolution of the  
projector.  
• The image may not be displayed correctly when the input sync. signal is “Composite  
Sync.” or “Sync. on G”.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SET SIGNALS  
The following signals are used for the initial settings.  
The signal timing of some computer models may be different. In such case, refer to  
adjust the V.POSIT and H.POSIT of the menu.  
Back porch b  
Front porch d  
Back porch b  
Display interval c  
Front porch d  
Display interval c  
Sync a  
Sync a  
Computer /  
Signal  
Horizontal signal timing (µs)  
Computer /  
Signal  
Vertical signal timimg (lines)  
a
b
c
d
a
3
b
42  
c
400  
d
1
TEXT  
2.0  
3.0  
20.3  
1.0  
TEXT  
VGA (60Hz)  
Mac 13"mode  
VGA (72Hz)  
VGA (75Hz)  
VGA (85Hz)  
SVGA (56Hz)  
SVGA (60Hz)  
SVGA (72Hz)  
SVGA (75Hz)  
SVGA (85Hz)  
Mac 16"mode  
XGA (60Hz)  
XGA (70Hz)  
XGA (75Hz)  
XGA (85Hz)  
1152×864 (75Hz)  
1280×960 (60Hz)  
1280×1024 (60Hz)  
1280×1024 (75Hz)  
1280×1024 (85Hz)  
1600×1200 (60Hz)  
3.8  
2.1  
1.3  
2.0  
1.6  
2.0  
3.2  
2.4  
1.6  
1.1  
1.1  
2.1  
1.8  
1.2  
1.0  
1.2  
1.0  
1.0  
1.1  
1.0  
1.2  
1.9  
3.2  
3.8  
3.8  
2.2  
3.6  
2.2  
1.3  
3.2  
2.7  
3.9  
2.5  
1.9  
2.2  
2.2  
2.4  
2.9  
2.3  
1.8  
1.4  
1.9  
25.4  
21.2  
20.3  
20.3  
17.8  
22.2  
20.0  
16.0  
16.2  
14.2  
14.5  
15.8  
13.7  
13.0  
10.8  
10.7  
11.9  
11.9  
9.5  
0.6  
2.1  
1.0  
0.5  
1.6  
0.7  
1.0  
1.1  
0.3  
0.6  
0.6  
0.4  
0.3  
0.2  
0.5  
0.6  
0.9  
0.4  
0.2  
0.4  
0.4  
VGA (60Hz)  
2
3
3
3
3
2
4
6
3
3
3
6
6
3
3
3
3
3
3
3
3
33  
39  
28  
16  
25  
22  
23  
23  
21  
27  
39  
29  
29  
28  
36  
32  
36  
38  
37  
44  
46  
480  
480  
480  
480  
480  
600  
600  
600  
600  
600  
624  
768  
768  
768  
768  
864  
960  
1024  
1024  
1024  
1200  
10  
3
9
1
1
1
1
37  
1
1
1
3
3
1
1
1
1
1
2
1
1
Mac 13"mode  
VGA (72Hz)  
VGA (75Hz)  
VGA (85Hz)  
SVGA (56Hz)  
SVGA (60Hz)  
SVGA (72Hz)  
SVGA (75Hz)  
SVGA (85Hz)  
Mac 16"mode  
XGA (60Hz)  
XGA (70Hz)  
XGA (75Hz)  
XGA (85Hz)  
1152×864 (75Hz)  
1280×960 (60Hz)  
1280×1024 (60Hz)  
1280×1024 (75Hz)  
1280×1024 (85Hz)  
1600×1200 (60Hz)  
8.1  
9.9  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION TO THE MOUSE CONTROL  
Projector  
Computer  
ADB Mouse  
1
2
1
ADB  
(
)
2
3
4
POWER ON  
DATA  
RTS  
3
4
5
6
7
+5V  
GND  
Mouse jack  
Mini DIN 4-pin  
CONTROL Terminal  
D-sub 15-pin shrink jack  
8
4
3
9
+5V  
GND  
1
2
10  
11  
12  
13  
14  
15  
Serial Mouse  
Projector  
Computer  
1
2
3
4
5
1
2
3
4
5
6
7
8
9
CD  
RD  
TD  
CONTROL Terminal  
DTR  
GND  
DSR  
RTS  
CTS  
RI  
Mouse jack  
D-sub 9-pin  
SEL0  
RTS  
6
7
D-sub 15-pin shrink jack  
8
9
1
2
3
4
5
10  
11  
12  
13  
14  
15  
GND  
TD  
8
9
6
7
USB Mouse  
USB jack  
(B type)  
Projector  
Computer  
USB jack  
(A type)  
+
5V  
1
1 +5V  
2
1
DATA 2  
DATA  
2
3
4
+
+
DATA  
DATA  
3
4
1
2
3
4
GND  
GND  
3
4
USB cable  
Projector  
Computer  
PS/2 Mouse  
1
2
3
4
5
1
2
3
4
5
6
DATA  
CLK  
DATA  
GND  
+5V  
CLK  
Mouse jack  
Mini DIN 6-pin  
CONTROL Terminal  
D-sub 15-pin shrink jack  
SEL0  
RTS  
6
7
8
6
5
+5V  
9
4
3
10  
11  
12  
13  
14  
15  
GND  
2
1
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS-232C COMMUNICATION  
(1) Turn off the projector and computer power supplies and connect with the RS-232C cable.  
(2) Turn on the computer power supply and after the computer has started up, turn on the  
projector power supply.  
RS-232C jack  
D-sub 9-pin  
Projector  
Computer  
Control jack  
D-sub 15-pin shrink jack  
Communications setting  
19200bps, 8N1  
1 Protocol  
Consist of header (7 bytes) + command data (6 bytes).  
2 Header  
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high  
CRC_low : Lower byte of CRC flag for command data.  
CRC_high : Upper byte of CRC flag for command data.  
3 Command data  
Command data chart  
byte_0  
byte_1  
high  
byte_2  
byte_3  
byte_4  
low  
byte_5  
Action  
Type  
Setting code  
low  
low  
high  
high  
Action (byte_0 - 1)  
Action  
Classification  
Content  
1
2
4
5
6
SET  
GET  
Change setting to desired value.  
Read projector internal setup value.  
Increment setup value by 1.  
Decrement setup value by 1.  
Run a command.  
INCREMENT  
DECREMENT  
EXECUTE  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS-232C COMMUNICATION (continued)  
Requesting projector status (Get command)  
(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)  
+‘00H’+‘00H’) from the computer to the projector.  
(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.  
Changing the projector settings (Set command)  
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) +  
setting code (2 bytes)) from the computer to the projector.  
(2) The projector changes the setting based on the above setting code.  
(3) The projector returns the response code ‘06H’ to the computer.  
Using the projector default settings (Reset Command)  
(1) The computer sends the default setting code Header + Command data (‘06H’+‘00H’+  
type (2 bytes) +‘00H’+‘00H’) to the projector.  
(2) The projector changes the specified setting to the default value.  
(3) The projector returns the response code ‘06H’ to the computer.  
Increasing the projector setting value (Increment command)  
(1) The computer sends the increment code Header + Command data (‘04H’+‘00H’+  
type (2 bytes) +‘00H’+‘00H’) to the projector.  
(2) The projector in creases the setting value on the above setting code.  
(3) The projector returns the response code ‘06H’ to the computer.  
Decreasing the projector setting value (Decrement command)  
(1) The computer sends the decrement code Header + Command data (‘05H’+‘00H’+  
type (2 bytes) +‘00H’ + ‘00H’) to the projector.  
(2) The projector decreases the setting value on the above setting code.  
(3) The projector returns the response code ‘06H’ to the computer.  
When a command sent by the projector cannot be understood by the computer  
When the command sent by the projector cannot be understood, the error command ‘15H’ is  
returned by the computer. Some times, the projector ignores RS-232C commands during  
other works. If the error command ‘15H’ is returned, please send the same command again.  
When data sent by the projector cannot be practice  
When the command sent by the projector cannot be practiced, the the error code ‘1cH’  
+‘xxxxH’ is returned.  
When the data length is greater than indicated by the data length code, the projector will  
ignore the excess data code.  
Conversely, when the data length is shorter than indicated by the data length code, an  
error code will be returned to the projector.  
NOTE Operation cannot be guaranteed when the projector receives an  
undefined command or data.  
Provide an interval of at least 40ms between the response code and any other code.  
• The projector outputs test data when the power supply is switched ON, and when the  
lamp is lit. Ignore this data.  
• Commands are not accepted during warm-up.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command data chart  
Command data  
Type Setting code  
Names  
Operation type  
Header  
CRC  
Action  
Blue  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 CB D3 01 00 00 30  
06 00 6B D0 01 00 00 30  
06 00 9B D0 01 00 00 30  
06 00 FB CA 01 00 00 30  
06 00 FB E2 01 00 00 30  
03 00  
05 00  
06 00  
20 00  
40 00  
00 00  
00 00  
01 00  
02 00  
03 00  
00 00  
00 00  
01 00  
00 00  
00 00  
01 00  
20 00  
00 00  
00 00  
01 00  
02 00  
03 00  
04 00  
05 00  
06 00  
07 00  
08 00  
White  
Black  
MyScreen  
ORIGNAL  
Get  
Set  
Set  
Blank Color  
06 00  
06 00 C7 D2 01 00 01 30  
06 00 57 D3 01 00 01 30  
06 00 A7 D3 01 00 01 30  
08 D3  
02 00 00 30  
Normal  
H Inverse  
V lnverse  
H&V Inverse  
Get  
Mirror  
06 00  
06 00  
06 00  
06 00  
37 D2  
F4 D2  
83 D2  
13 D3  
01 00 01 30  
02 00 01 30  
01 00 02 30  
01 00 02 30  
Normal  
Freeze  
Set  
Set  
Freeze  
Startup  
Get  
06 00 B0 D2 02 00 02 30  
06 00 0B D2 01 00 04 30  
06 00 9B D3 01 00 04 30  
06 00 CB CB 01 00 04 30  
ORIGNAL  
OFF  
MyScreen  
Get  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
38 D2  
F7 D3  
67 D2  
97 D2  
07 D3  
37 D1  
02 00 04 30  
01 00 05 30  
01 00 05 30  
01 00 05 30  
01 00 05 30  
01 00 05 30  
English  
Français  
Deutsch  
Español  
Italiano  
Norsk  
06 00 A7 D0 01 00 05 30  
06 00 57 D0 01 00 05 30  
06 00 C7 D1 01 00 05 30  
06 00 37 D4 01 00 05 30  
06 00 A7 D5 01 00 05 30  
06 00 57 D5 01 00 05 30  
Set  
Language  
Nederlands  
Português  
日本語  
BE EF  
03  
09 00  
中文  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
0A 00  
00 00  
00 00  
00 00  
00 00  
00 00  
Get  
Get  
06 00 C4 D3 02 00 05 30  
06 00 7C D2 02 00 07 30  
06 00 1A D2 04 00 07 30  
06 00 CB D3 05 00 07 30  
Magnify  
Auto off  
Increment  
Decrement  
Get  
06 00  
06 00  
06 00  
08 86  
6E 86  
BF 87  
02 00 10 31  
04 00 10 31  
05 00 10 31  
Increment  
Decrement  
BE EF  
BE EF  
03  
03  
00 00  
00 00  
Brightness  
Reset  
Execute  
Execute  
Execute  
BE EF  
BE EF  
BE EF  
03  
03  
03  
06 00  
58 D3  
06 00 00 70  
00 00  
00 00  
00 00  
Contrast Reset  
06 00 A4 D2 06 00 01 70  
06 00 E0 D2 06 00 02 70  
V.Position  
Reset  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command data chart (continued)  
Command data  
Action Type Setting code  
Names  
Operation type  
Header  
CRC  
IC D3  
68 D2  
H.Position Reset  
H.Size Reset  
Execute  
Execute  
BE EF  
BE EF  
03  
03  
06 00  
06 00  
06 00 03 70  
06 00 04 70  
00 00  
00 00  
Color Balance  
R Reset  
Execute  
Execute  
BE EF  
BE EF  
03  
03  
06 00  
94 D3  
06 00 05 70  
00 00  
00 00  
Color Balance  
B Reset  
06 00 D0 D3 06 00 06 70  
06 00 C4 D0 06 00 09 70  
Sharpness Reset  
Color Reset  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
Execute  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
06 00  
80 D0  
06 00 0A 70  
Tint Reset  
06 00 7C D1 06 00 0B 70  
Keystone_V Reset  
Keystone_H Reset  
Auto Adjust  
06 00  
06 00  
06 00  
08 D0  
98 D8  
91 D0  
06 00 0C 70  
06 00 20 70  
06 00 0A 20  
Lamp Time Reset  
06 00 58 DC 06 00 30 70  
06 00 98 C6 06 00 40 70  
Filter Time Reset  
Execute  
off  
BE EF  
03  
00 00  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
06 00 FB D8 01 00 20 30  
06 00 6B D9 01 00 20 30  
06 00 C8 D8 02 00 20 30  
06 00 D9 D8 02 00 20 60  
00 00  
01 00  
00 00  
00 00  
Set  
Blank on/off  
on  
Get  
Get  
(Example of Return)  
00 00 01 00  
(Normal) (Cover-error)  
02 00  
(Fan-error)  
03 00  
(Lamp-error)  
Error Status  
Power  
04 00 05 00  
(Temp-error) (Air flow-error) (Lamp-Time-over) (Cool-error) (Filter-Error)  
06 00  
07 00  
0800  
OFF  
ON  
BE EF  
BE EF  
BE EF  
03  
03  
03  
06 00 2A D3 01 00 00 60  
06 00 BA D2 01 00 00 60  
00 00  
01 00  
00 00  
Set  
Set  
Get  
06 00  
19 D3  
02 00 00 60  
RGB1  
RGB2  
Video  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 FE D2 01 00 00 20  
06 00 3E D0 01 00 00 20  
06 00 6E D3 01 00 00 20  
06 00 9E D3 01 00 00 20  
06 00 AE D1 01 00 00 20  
06 00 CD D2 02 00 00 20  
00 00  
04 00  
01 00  
02 00  
05 00  
00 00  
00 00  
00 00  
Input Source  
SVideo  
Component  
Get  
Get  
06 00  
06 00  
06 00  
31 D3  
57 D3  
86 D2  
02 00 01 20  
04 00 01 20  
05 00 01 20  
Increment  
Volume  
Mute  
Decrement  
Normal  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
00 00  
00 00  
01 00  
00 00  
00 00  
00 00  
00 00  
06 00  
46 D3  
01 00 02 20  
Set  
Mute  
Get  
06 00 D6 D2 01 00 02 20  
06 00  
06 00  
75 D3  
89 D2  
02 00 02 20  
02 00 03 20  
Get  
Increment  
Decrement  
06 00 EF D2 04 00 03 20  
06 00 3E D3 05 00 03 20  
Brightness  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command data  
Type Setting code  
Names  
Operation type  
Header  
CRC  
Action  
Get  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
06 00 FD D3 02 00 04 20  
06 00 9B D3 04 00 04 20  
06 00 4A D2 05 00 04 20  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
Contrast  
Increment  
Decrement  
Get  
06 00  
06 00  
01 D2  
67 D2  
02 00 05 20  
04 00 05 20  
Color Balance R  
Increment  
Decrement  
06 00 B6 D3 05 00 05 20  
Get  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
06 00  
06 00  
06 00  
45 D2  
23 D2  
F2 D3  
02 00 06 20  
04 00 06 20  
05 00 06 20  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
Color Balance B  
Keystone_V  
Increment  
Decrement  
Get  
06 00 B9 D3 02 00 07 20  
06 00 DF D3 04 00 07 20  
06 00 0E D2 05 00 07 20  
Increment  
Decrement  
Get  
Increment  
Decrement  
4:3  
BE EF  
BE EF  
BE EF  
03  
03  
03  
06 00 E9 D0 02 00 0B 20  
00 00  
00 00  
00 00  
06 00  
8F D0  
04 00 0B 20  
Keystone_H  
Aspect  
06 00 5E D1 05 00 0B 20  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00 9E D0 01 00 08 20  
06 00 0E D1 01 00 08 20  
06 00 FE D1 01 00 08 20  
06 00 AD D0 02 00 08 20  
00 00  
01 00  
02 00  
00 00  
00 00  
01 00  
02 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
Set  
16:9  
Small  
Get  
Default  
Bottom  
Top  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
62 D1  
F2 D0  
02 D0  
51 D1  
0D 83  
6B 83  
BA 82  
F1 82  
97 82  
46 83  
01 00 09 20  
01 00 09 20  
01 00 09 20  
02 00 09 20  
02 00 00 21  
04 00 00 21  
05 00 00 21  
02 00 01 21  
04 00 01 21  
05 00 01 21  
Picture  
Position at  
16 : 9 or Small  
Set  
Get  
Get  
V.Position  
H.Position  
Increment  
Decrement  
Get  
Increment  
Decrement  
Get  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
B5 82  
D3 82  
02 83  
49 83  
2F 83  
FE 82  
02 00 02 21  
04 00 02 21  
05 00 02 21  
02 00 03 21  
04 00 03 21  
05 00 03 21  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
H.Size  
Increment  
Decrement  
Get  
H.Phase  
Increment  
Decrement  
Get  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
F1 72  
97 72  
46 73  
B5 72  
D3 72  
02 73  
02 00 01 22  
04 00 01 22  
05 00 01 22  
02 00 02 22  
04 00 02 22  
05 00 02 22  
00 00  
00 00  
00 00  
00 00  
00 00  
00 00  
Sharpness  
Color  
Increment  
Decrement  
Get  
Increment  
Decrement  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command data chart (continued)  
Command data  
Action Type Setting code  
Names  
Operation type  
Header  
CRC  
Get  
Increment  
Decrement  
Auto  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
BE EF  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
03  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
49 73  
2F 73  
FE 72  
9E 75  
FE 71  
6E 70  
6E 75  
5E 72  
FE 74  
0E 71  
0D 73  
F2 73  
62 72  
C1 73  
02 00 03 22  
04 00 03 22  
05 00 03 22  
01 00 00 22  
01 00 00 22  
01 00 00 22  
01 00 00 22  
01 00 00 22  
01 00 00 22  
01 00 00 22  
02 00 00 22  
01 00 05 22  
01 00 05 22  
02 00 05 22  
00 00  
00 00  
00 00  
0A 00  
04 00  
05 00  
09 00  
02 00  
08 00  
07 00  
00 00  
00 00  
01 00  
00 00  
01 00  
00 00  
00 00  
00 00  
01 00  
00 00  
00 00  
01 00  
02 00  
00 00  
02 00  
01 00  
00 00  
00 00  
00 00  
01 00  
03 00  
00 00  
01 00  
00 00  
00 00  
Tint  
NTSC  
PAL  
Set  
SECAM  
NTSC 4.43  
M-PAL  
N-PAL  
Get  
Video Format  
1080i  
1035i  
Get  
Set  
Set  
Set  
HDTV  
off  
06 00 CB D0 01 00 08 30  
06 00 5B D1 01 00 08 30  
Sync on G  
WHISPER  
on  
Get  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
06 00  
68 D1  
3B 23  
AB 22  
08 23  
C7 F0  
57 F1  
A7 F1  
F4 F0  
C2 71  
32 71  
A2 70  
91 70  
02 00 08 30  
01 00 00 33  
01 00 00 33  
02 00 00 33  
01 00 A1 30  
01 00 A1 30  
01 00 A1 30  
02 00 A1 30  
01 00 09 22  
01 00 09 22  
01 00 09 22  
02 00 09 22  
01 00 12 30  
NORMAL  
WHISPER  
Get  
NORMAL  
CINEMA  
DYNAMIC  
Get  
Set  
Set  
GAMMA  
Large  
Middle  
Small  
Get  
Over Scan  
Full  
43 D6  
Set  
Set  
MyScreen Size  
MyScreen Lock  
X1  
06 00 D3 D7 01 00 12 30  
06 00 70 D6 02 00 12 30  
Get  
off  
06 00 3B EF 01 00 C0 30  
06 00 AB EE 01 00 C0 30  
on  
Get  
06 00  
06 00 C2 FF 02 00 90 10  
06 00 C2 F0 02 00 A0 10  
08 EF  
02 00 C0 30  
Lamp Time  
Filter Time  
Get  
Get  
BE EF  
03  
00 00  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REGULATORY NOTICES  
FCC Statement Warning  
WARNING: This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
INSTRUCTIONS TO USERS: This equipment complies with the requirements  
of FCC (Federal Communication Commission) equipment provided that the  
following conditions are met.  
The cables may have to be used with the core set to the projector side. Use  
the cables which are included with the projector or specified.  
ST  
AND  
BY/ON  
INPU  
LA  
N
T
P
KEYSTO  
NE  
TENP  
R
PO  
W
E
RESET  
Core  
CAUTION: Changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate the  
equipment.  
For the Customers in CANADA  
NOTICE: This Class B digital apparatus complies with Canadian ICES-003.  
Pour les utilisateurs au Canada  
AVIS: Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du  
Canada.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
Boxlight (“Boxlight”) warrants that each Boxlight CP-322i & CP-634i (“the Product”) sold hereunder will conform to and  
function in accordance with the written specifications of Boxlight. Said limited warranty shall apply only to the first per-  
son or entity that purchases the Product for personal or business use and not for the purpose of distribution or resale. Said  
warranty shall continue for a period of two (2) years from the date of such purchase. The standard limited warranty  
excludes the lamps in projectors after 120 days or 500 hours (whichever comes first) and the accessories after one year.  
Boxlight does not warrant that the Product will meet the specific requirements of the first person or entity that purchases  
the Product for personal or business use. Boxlight’s liability for the breach of the foregoing limited warranty is limited to  
the repair or replacement of the Product or refund of the purchase price of the Product, at Boxlight’s sole option.  
Replacement Product may be re-furbished in “like-new” condition, at Boxlight’s sole discretion. To exercise the  
Purchaser’s rights under the foregoing warranty, the Product must be returned at the Purchaser’s sole cost and expense, to  
Boxlight or to any authorized Boxlight service center, and the Product must be accompanied by a written letter explaining  
the problem and which includes (i) proof of date of purchase; (ii) the dealer’s name; and (iii) the model and serial number  
of the Product. When sending your unit in for repair, please ship your unit in its original packing material or a Boxlight  
approved ATA Shipping Case, or have a professional packaging company pack the unit. Please insure your shipment for  
its full value. A return authorization number, issued by the Boxlight Customer Service department, must also be  
clearly displayed on the outside of the shipping carton containing the Product.  
WARRANTY LIMITATION AND EXCLUSION  
Boxlight shall have no further obligation under the foregoing limited warranty if the Product has been damaged due to  
abuse, misuse, neglect, accident, unusual physical or electrical stress (unusual physical and electrical stress includes  
unusually long operation, exposure to smoke and other airborne contaminants), unauthorized modifications, tampering,  
alterations, or service other than by Boxlight or its authorized agents, causes other than from ordinary use or failure to  
properly use the Product in the application for which said Product is intended.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISCLAIMER OF UNSTATED WARRANTIES  
THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE FACE HEREOF AND THE FOREGOING  
WARRANTY SHALL NOT BE EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT  
SIGNED BY BOXLIGHT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU.  
LIMITATION OF LIABILITY  
IT IS UNDERSTOOD AND AGREED THAT BOXLIGHT’S LIABILITY WHETHER IN CONTRACT, IN TORT,  
UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF THE  
AMOUNT OF THE PURCHASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES SHALL  
BOXLIGHT BE LIABLE  
FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS, LOST  
REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PRODUCT IS A CONSIDERATION IN  
LIMITING BOXLIGHT’S LIABILITY. NO ACTION, REGARDLESS OF FORM, ARISING OUT OF THE  
AGREEMENT TO PURCHASE THE PRODUCT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR  
AFTER THE CAUSE OF ACTION HAS ACCRUED. SOME STATES DO NOT ALLOW THE EXCLUSION OR  
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR  
EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,  
AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.  
Boxlight Corporation  
19332 Powder Hill Place  
Poulsbo, WA 98370-7407 USA  
USA and Canada 800.762.5757  
International +1.360.779.7901  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Box Computer Hardware IC1000A User Manual
Black Decker Oven CTO649C User Manual
Blue Rhino Charcoal Grill CBC830L C User Manual
Bosch Appliances Network Router ATM POS Bridge User Manual
BOXLIGHT Projection Television Pro6500DP User Manual
Brinkmann Fan Personal Fan User Manual
Brother Wireless Office Headset BAS 300G User Manual
Brunton Stove 81 100727 User Manual
Bushnell Binoculars 118328 User Manual
Charnwood Gas Heater DX20i MkII User Manual