TV. VIDEO. AUDIO. MECABLITZ
Elba
63 TD 61 – 100 MT
70 TD 64 – 100 MT
72 TD 66 – 100 MT
–SF 72 TD 67 – 100 MT
82 TE 93 – 100 MT
70 TE 65 – 100 MT
Hawaii
Linea–SF
Linea
de luxe
Gemini–SF
Morea–S
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control handset RB 11
The remote control sends commands to the TV set with the aid of infrared light. For this reason, you should always point the remote control at
the TV set for reliable operation. Use of the remote control may interfere with the operation of other devices or systems controlled which use
infrared light (such as infrared headphones).
If the TV set is exposed to direct sunlight, it may sometimes not function correctly because it cannot recognise the commands transmitted by
remote control.
The television must be switched on or in standby mode (ON/OFF key depressed) when it is to be operated by remote control. Always point the
remote control in the direction of the TV for operation. A pilot lamp starts to flash as soon as a key on the remote control handset is pressed.
Nota:
• ON - Set switches to last viewed pro-
For explanation of the video level for
gramme
the remote control of video recorders,
please refer to Section 16, page 54.
• OFF (standby setting)
RB 11
100 Hz
Do not point the remote con-
trol unit into your eyes and
press a key on it !
VTR
1
4
7
2
5
8
0
3
6
9
Do not use rechargeable bat-
teries in the remote control
unit.
• Numeric keys
• Mute
• Preselect with entry of two digits
• Cursor page selection in Megatext mode
-/--
TIMER
P
+
• Changing the setting
ľľ
ıı
-
• Next programme
OK
• Partial page selection with multiple
pages in Megatext
• Basic picture and sound settings
P
-
• Call Megatext
• Return from menu and
Megatext to TV picture
•
Select picture function
ı
TV
• Megatext - select subject
MENU
ı
• Call TV menu
• Operator Help
•
Select sound function
• Megatext - select chapter
ľľ
ıı
?
•
Call station table
• Megatext - next page
A
•
AV recording
AV
•
Function keys, depending upon
programming
• Megatext - skip to next mark
B
REC
Ȅ
ɚ
•
Logo display (display of time, program-
me, and sound mode
• Megatext - set or delete mark
• IInfotext (select marks)
INFO
ķ
• Return to last programme
PRG.
Batteries:
• Changeover from spoken to
music broadcasts
ɮ
Insert the enclosed batteries in the remote
control, observing the symbols on the
cover of the battery compartment.
Remove exhausted batteries from the
remote control and return them to your
dealer or to an authorised battery collection
point.
IJ
• Change of format (variable zoom)
• Still picture
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Setting up and connecting
Setting up
When selecting a suitable place for the TV, be sure that no bright
light or sunlight falls on the screen. Light may cause reflections
and impair the brilliance of the image.
The best viewing distance is five times the picture tube diagonal,
e.g. about 3.5 m for TV sets with a 70 cm screen.
5x cm
y
y
Connecting the aerial
TV sets require adequate ventilation. The ventilation
slots at the rear of the set should therefore never be
covered by curtains, doilies, newspapers or similar
objects. Likewise, all slots at the bottom of the set
must be freely accessible so that the intake of air is
not impaired in any way
Standard SAT and terrestrial station aerial sockets are fitted at
the rear of the TV.
Thunderstorms represent a danger for all electrical appliances! If
lightning strikes the power line or the aerial, the TV may be
damaged even if it is switched off. Therefore, always unplug the
mains lead AND aerial during thunderstorms. If the TV is not
going to be used for an extended period of time, for instance
when on holiday, then disconnect the set both from the mains
and the aerial.
Aerial connection
Do not set up the TV near a radiator as this would
impair adequate cooling.
Do not place
-
burning candles or
- flower vases filled with water
on top of the TV set.
Hot wax and liquids destroy the electrical components
and jeopardize the electrical safety of the set
5 cm
20 cm
10 cm
698-3EURO
10 cm
Mains voltage
y
Plug the mains lead into a wall
outlet. The TV set is equipped for
230 V ac.
If you place the set in a wall unit, leave sufficient space
on all sides so that the air can circulate freely.
Your TV set is intended for use in dry rooms. If you wish
to use it occasionally outdoors, be sure to protect it
against any kind of moisture (rain, splashes, dew, etc.).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Turning the TV on and off
Turning on with the ON/OFF key
Turning on with the remote control
Before turning on a cold TV in a warm room, first
allow any condensation mist that may have formed
on the screen to evaporate.
The programmes can be directly selected with the 0-9 keys
when the television is in standby mode.
Select single-digit programme numbers by pressing the corre-
Press the ON/OFF key.
sponding numeric key.
-/--
Two-digit programme numbers are entered with the
ect key:
presel-
Programme position 1 is then selected. Depending on the assign
ments made, the following information will appear in the screen
box:
-
• The television is switched to the last watched programme.
• The preselect box is displayed on the screen.
SAT programme position
(only with built-in
Terrestrial
programme position
SAT upgrade module)
Pr - -
• The 2-digit programme number can now be entered with the
numeric keys.
Pr 1
MONO
PS 1
MONO
ARD
ARD
18:15:33
18:15:33
The last programme watched before the television was switched
off can be set with the
key.
Turning off with the ON/OFF key
The television is automatically set to standby mode ten minutes
after station closedown. However, this is not the case if the station
starts to transmit a test card within these ten minutes.
Press the ON/OFF key. The television is now disconnected from
the mains.
Turning off with the remote control
You are advised to turn off the TV with the ON/OFF key after station
closedown and when it is not going to be used for an extended
period of time.
Press the
key to switch the TV to standby mode.
The standby status is indicated by the red lamp.
2. Language selection in the TV menu
Press this key on the remote
control....
The screen displays
Explanation
MENU
?
TV
return
TV picture
Help The desired language for the entire TV menu is adju-
1. Call the Equipm.
Configuration menu
sted in the „Equipm.Configuration“ menu.
Equipm. configuration
-
Select the desired language with the
keys when
MENU
Function keys
blue
red
green
the submenu for the language is displayed on a green
background.
1
2
5
8
0
3
6
9
4
7
yellow Device connection
--/-
OK
Press the
key to confirm and store the selection
2. Adjust the language
P
+
-
OK
made. The complete text in the TV menu is then dis-
played in the selected language.
white
SAT settings
P
-
-
TV
MENU
green
Language:
further
English
?
A
B
AV
REC
Ȅ
red
3. Store the selected language
store?
6 9 8 - 0 6 N - G B
OK
OK
4. Return to TV picture
TV
TV picture
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 TV menu and operator help
Menu control of the TV, and the versatility of the system, ensure that supposed complicated settings and entries are made easily and
?
clearly comprehensible for everyone. Operator Help can be called with the
functions of the individual keys.
key when in TV mode. Operator Help indicates the
?
All settings are entered by way of different submenus. Simply call Operator Help with the
key should you encounter difficulties in
entering the different equipment configurations or if problems arise in operating the TV. Operator Help is specifically matched to the
corresponding menu and functions as a reminder when settings are entered or programmed.
Press this key on the remote
The screen displays
Explanation
control....
?
return
Operator Help shows the functions of the individual
keys when in TV mode.
Operator Help: Call/exit
Operator help
Switch set on/off
-/--
0
9
P
-
Prog select
(2 dig.)
P
+
Next programme
The A and B function keys can be programmed by the
user. Consequently their functions can differ to those
shown in the adjoining picture.
OK
1
2
5
8
0
3
6
9
Basic video/audio settings
Sound interrupt
Change vol./adj. function
Sel.video/audio funct.
4
7
-
/
--/-
Station table
AV recording
P
+
AV
Ȅ
TV
-
OK
Program/time of day
Teletext/TV picture
TV-menu
P
-
?
TV
MENU
MENU
?
MUTING - 12DB
Zoom 2:1
Infotext
A
B
A
B
AV
Ȅ
REC
Ȅ
PRG
last program.
Var. format
Spch/mus.
Still
ɮ
I I
IJ
6 9 8 - H E L P 1 - G B
The individual menu lines are selected with the colou-
red keys of the remote control, to open the correspon-
ding submenu. Keys not enhanced in white or colour
on the displayed menu have no function in the current
operating state.
MENU
TV
?
return
picture
Help
TV menu: Call/exit
TV-menu
blue
Video standard values
Audio standard values
Station settings
1
2
5
8
0
3
6
9
4
7
yellow
--/-
Settings in the submenus can be changed
-
P
+
with the
keys.
-
OK
white
green
P
-
OK
TV
Press the
key to confirm and store the
MENU
MENU
new setting.
?
Timer/childlock
A
B
AV
MENU
Press the
key to move back by one
REC
Ȅ
red
Equipm. configuration
step within the TV menu.
6 9 8 - 0 1 - G B
MENU
TV
?
return
picture
return
Operator Help can be called for each menu displayed
on the screen (Example: Operator Help with displayed
TV menu).
Operator Help in TV menu:
Call/exit
TV-menu
Operator help
Change/store lumi-
1
2
5
8
0
3
6
9
nance, contrast, etc.
4
7
Change/store volume
treble, etc.
--/-
P
+
-
Define program
assignments
OK
?
P
-
TV
MENU
Timer settings/
childlock
?
AV
A
B
AV
TV/SAT-configuration,
settings function
keys, menu language
REC
Ȅ
R E C
Ȅ
6 9 8 - H E L P 2 - G B
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Programme selection
Press this key on the remote
control....
The screen displays
Explanation
1. Select the programme
position (e.g. Prog
number 10)
-/--
Press the
key when the TV is in standby mode.
The TV then switches to the programme viewed before
the receiver was turned off to standby.
Now enter the programme number with the numeric
keys. The TV is changed over to the selected programme
position as soon as the last digit has been entered.
-/--
1
0
With single-digit programme numbers it is only neces-
sary to press the corresponding key, e.g. key 4 for pro-
gramme position 4.
Pr - -
After the programme position has been selected an
information box appears indicating the programme
position number, the time, and the currently valid
sound mode, e.g. stereo.
2. Next programme
P
-
P
+
Press the
mes. Keeping the
keys to run through the program-
P
-
P
+
or
key depressed for more
ZDF
BR3
than 2 seconds will cause a programme box to be dis-
played on the screen for selection of the programme
position. Release the
desired logo is highlighted in white. The corresponding
programme position will then be selected.
RTL
SAT1
RTL2
PRO7
EUSPO
NTV
P
-
P
+
or
key as soon as the
P
+
NORD3
MDR3
SWF3
Pr 13 MONO
RTL
18:15:33
P
-
3. Last programme
With this key, you can switch back and forth between
the last two programme positions you selected.
Example:
You are watching a programme on ITN; during the
commercials, you switch to BBC with the aid of the
ꢀ . .ᕩ
numeric keys
PRG.
You can now switch back and forth between ITN and
PRG.
BBC by pressing the
key.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct channel entry/
station search
3. Presetting TV stations
The TV is supplied with factory preprogrammed TV stations. However, if you can receive TV stations in your area that are not listed in the
station table, then these transmitters can be entered and programmed at any time.
You can choose one of the following three programming possibilities:
a) Direct channel entry
b) Station search
c) Autostore function
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
With direct channel entry it is necessary to know the
1. Call the station table and
channel type survey
type of channel and the channel number.
Station table
If type and number of channel are not known, you can
scan through the entire reception range with the
search function to locate stations.
Prog
LM
Logo
Channel
Signal
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
00 Video Rec.1
06
34
40
Aerial
Aerial
Aerial
The station table lists all the preset stations.
These stations can be changed at any time.
SAT 1
blue
Std channel
06
ARD
yellow
Spec. channel
SAT-TV
yellow
SAT-RADIO
Fine tuning
The cursor always highlights the type of channel cur-
rently preset in the given programme position.
red
Std., Pict., Sound
For the search function it is advisable to switch to a
6 9 8 - 0 3 A - G B
vacant programme position.
MENU
TV
?
return
picture
Help
The yellow framed field offers four types of channels.
Select the channel type with the assigned coloured
key.
2. Select the type of channel
(e.g. standard channel)
Station table
Prog
LM
Logo
Channel
Signal
After the channel type has been selected, a channel
number is displayed in the bar when a station is stored
in this programme position. Two lines are shown if this
position is still vacant.
0
1
2
3
4
5
6
7
8
9
VTR1
00 Video Rec.1
ARD
06
34
40
Aerial
Aerial
Aerial
ZDF
SAT 1
blue
blue
Std channel
06
ARD
yellow
Spec. channel
„SAT channel“ and „SAT radio channel“ can only be
selected if a SAT upgrade module has been installed in
the TV receiver.
SAT-TV
SAT-RADIO
Fine tuning
red
Std., Pict., Sound
6 9 8 - 0 3 A - G B
3. Enter the channel number
(Example: Standard channel
06) or start station search
MENU
TV
?
return
picture
Help
With direct channel entry, the station table is briefly
faded out when the channel number is entered, and
the selected station is displayed.
Station table
Prog
LM
Logo
Channel
Signal
The station search proceeds from the displayed
channel number in a forward sequence with the
0
1
2
3
4
5
6
7
8
9
VTR1
00 Video Rec.1
-
ARD
06
34
40
Aerial
Aerial
Aerial
key, and in a reverse sequence with the
key.
0
6
ZDF
SAT 1
Search proceeds from the lower channel area
upwards or downwards when two lines are displayed.
The search stops when a station has been found.
blue
Std channel
06
ARD
or
yellow
Spec. channel
SAT-TV
-
SAT-RADIO
Fine tuning
Proceed as described in step 4 if the located station is
to be stored.
Press the or - key if the located station is not to be
stored so that the search can be continued.
red
Std., Pict., Sound
6 9 8 - 0 3 A - S T - G B
store?
OK
4. Store the setting and return
to TV picture
Complete fine tuning if station reception is not clear
(see Section 3.2).
OK
TV
TV picture
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Autostore function,
sorted to countries
3. Presetting TV stations
The autostore function automatically scans through the entire reception range to locate stations. The located stations are presented in the
OK
station table and can then be stored by way of the
key.
If you do not like the order in which the stations appear in the station table, you can sort the stations to match your own requirements as
described on the next page.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
1. Call the menu
„Station settings“
MENU
Station settings
blue
Station table
1
2
5
8
0
3
6
9
4
7
yellow Autostore
--/-
P
+
-
OK
SAT programming
P
-
TV
MENU
?
A
B
AV
REC
Ȅ
6 9 8 - 0 3 B - G B
MENU
TV
?
return
picture
Help
Press the yellow key to call the autostore function. Use
the numeric keys to enter the two-digit programme
number (e.g. 01) at which the station is to be stored.
2. Call the autostore function
and enter a programme
number (e.g. 01)
Autostore
Prog
Logo
Channel
Signal
After entry of this number, a red box with the text
„Start ?“ is displayed.
yellow
sort for
blue
Germany
yellow
white
green
Austria
Switzerland
others
1
4
7
2
5
8
0
3
6
9
from nr. of progr. 01
6 9 8 - 0 3 C - S P - G B
start ?
OK
MENU
TV
return
picture
The TV now scans through the entire reception range.
3. Start the autostore function
The first „standard-channel“ station to be found is
shown on the screen after all stations have been loca-
ted. The channel number and an automatic logo are
displayed. The auto logo only appears for stations
which transmit a VPS signal.
Autostore
Prog
Logo
Channel
Signal
Aerial
ARD
06
OK
Now proceed as described in Section 3.1 Sorting
stations.
Searching for stations
Ch06
6 9 8 - 0 3 D - G B
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 Sorting stations
IIn the „Sort“ submenu you can move, exchange, copy, or delete the stationss stored in the programme positions. The „Sort“ submenu is
displayed automatically after the autostore function has found all available stations.
This menu can also be called at any time from the station table display for subsequent modification of the station programming.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
When the „Sort“ submenu is displayed, the function
„Move“ is preset.
1. Call the „Sort“ submenu
and move the station
Station table
Logo
P
-
P
+
Use the
and
keys to select the programme
Prog
LM
Channel
Signal
position to be modified.
either automatically after autostore
or
0
1
2
3
4
5
6
7
8
9
VTR2
ARD
02 Video Rec.2
06
34
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Select one of the functions „move“, „exchange“,
„copy“ or „delete“ with the related coloured key.
ZDF
SAT 1
RTL
40
36
59
BR 3
N 3
If you inadvertently delete a programme position, you
can restore it by pressing the B key.
S23
12
MDR 3
SWF 3
MDR 3
45
S05
sort
blue
move
yellow change
A
white
copy Pr 1 ➔ Pr - -
Pr 1 delete
green
MENU
TV
?
return
picture
Help
When moving, exchanging or copying a programme
position, the new programme position must be selected
by entering two digits on the numeric keys.
2. Exchanging two programme
positions
Station table
Prog
LM
Logo
Channel
Signal
yellow
0
1
2
3
4
5
6
7
8
9
VTR2
ARD
02 Video Rec.2
The blinking hyphen on the right of the sub-menu now
prompts you for input of a programme position number.
06
34
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
ZDF
1
4
7
2
5
8
0
3
6
9
SAT 1
RTL
40
36
BR 3
N 3
59
S23
12
The selected function is executed as soon as you
enter the new number.
MDR 3
SWF 3
MDR 3
45
S05
sort
blue
yellow
white
green
move
exchange
Pr1 ➔ Pr - -
Pr1 ➔ Pr - -
copy Pr 1 ➔ Pr - -
Pr 1 delete
MENU
TV
?
return
picture
Help
After the contents of a programme position have been
moved, exchanged, copied or deleted, a red store box is
displayed to ask if you want to store the new settings.
3. Store the settings
Station table
Prog
LM
Logo
Channel
Signal
0
1
2
3
4
5
6
7
8
9
VTR2
ARD
02 Video Rec.2
OK
Press the
key to store the new settings or press
06
34
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
ZDF
TV
SAT 1
RTL
40
the
key to abort the operation.
OK
36
BR 3
N 3
59
S23
12
MDR 3
SWF 3
MDR 3
45
S05
sort
blue
yellow
white
green
move
exchange
copy Pr 1 ➔ Pr -
Pr 1 delete
Pr1 ➔ Pr - -
Pr1 ➔ sPtro- -re?
OK
4. Return to TV picture
TV
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Fine tuning
The individual channels are automatically tuned to channel centre for station tuning. As a rule, this automatic tuning will be sufficient.
Apply manual fine tuning if automatic tuning does not produce satisfactory results.
Select the programme number at which fine tuning is to be completed.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
The „Fine tuning“ function is only activated when the
red bar is displayed.
1. Select the fine tuning
function
Station table
Prog
LM
Logo
Channel
Signal
0
1
2
3
4
5
6
7
8
9
VTR1
00 Video Rec.1
ARD
ZDF
06
34
40
Aerial
Aerial
Aerial
SAT 1
blue
Std channel
Spec. channel
06
ARD
yellow
yellow
SAT-TV
SAT-RADIO
Fine tuning
red
red
Std, Pict., Sound
6 9 8 - 0 3 G - G B
2. Adjust the fine tuning
Adjus- t fine tuning within the range of -99 to +99 with
the
keys.
The station table is blanked out for better picture
assessment.
blue
Std channel
Spec. channel
SAT-TV
06
ARD
yellow
-
SAT-RADIO
Fine tuning
red
store?
OK
OK
Once the station is correctly tuned, press the
to store the new setting.
key
3. Store the fine tuning and
return to TV picture
OK
TV
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Allocating a station logo
A logical logo consisting of up to 5 characters can be allocated to each station. The station RTL 2, for example, can be allocated the logo
RTL 2.
Manual logo allocation is not necessary with most stations. The corresponding station logo appears a few seconds after the picture when
a station is selected by direct channel entry. However, an automatic logo only appears for stations which transmit a VPS signal.
Press this key on the remote
The screen displays
Explanation
control....
MENU
?
TV
return
TV picture
Help
The logo is automatically displayed if the selected pro-
gramme position already has a logo. The field remains
blank if a logo has not yet been allocated.
1. Call the logo menu
TV station table
Prog
LM
Logo
Channel
Signal
0
1
2
3
4
5
6
7
8
9
AS
ne
ne
Logo:
Any existing logo will be overwritten.
white
blue
ABCDEFGHIJKLMNOPQRSTUVW
ne
ne
ne
XYZ
0123456789
!+-
ne
ne
ne
ne
P
+
-
select
P
-
next number
6 9 8 + 0 3 H - G B
MENU
?
TV
return
TV picture
Help
Select the desired- character (in our example the letter
2. Select the first character
P
-
P
+
R) with the keys
,
,
.
TV station table
This will overwrite any existing logo.
Prog
LM
Logo
Channel
Signal
0
AS
ne
ne
Logo:
P
R
+
1
2
3
4
5
6
7
8
9
-
ABCDEFGHIJKLMNOPQRSTUVW
ne
ne
ne
XYZ
0123456789
!+-
ne
ne
ne
ne
P
+
-
select
P
-
P
-
next number
store?
6 9 8 + 0 3 I - G B
OK
MENU
?
TV
return
TV picture
Help
3. Move the cursor to the
second position and select
the second character
The cursor is moved within the logo field with the blue
key.
TV station table
Select the desired- character (in our example the letter
Prog
LM
Logo
Channel
Signal
P
-
P
+
T) with the keys
,
,
.
blue
0
1
2
3
4
5
6
7
8
9
AS
ne
ne
Logo:
R T
Repeat this procedure to enter the entire logo.
ABCDEFGHIJKLMNOPQRSTUVW
ne
ne
P
+
ne
XYZ
0123456789
!+-
ne
ne
ne
ne
-
P
+
-
select
P
-
next number
P
-
6 9 8 + 0 3 J - G B
OK
4. Store the setting and return
to TV picture
After input of the desired logo, press the
store it.
key to
The programmed logo automatically appears in the
station table.
TV
OK
TV picture
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Changing individual picture settings
Press this key on the remote
control....
The screen displays
Explanation
Luminance
Press the
tion.
key to display the last adjusted func-
1. Adjusting the luminance
-
OK
40 change:
Continue pressing the
ting value to be changed is displayed.
key until the picture set-
Contrast
40 change
-
OK
OK
OK
-
Adjust the required value with the
keys.
-
Chrominance
+
-
-
40 change
Sharpness
2. Adjusting the contrast
Press the
key a number of times until the con-
R
02 change
trast field is displayed on the screen.
6 9 4 - 0 0 E - G B
-
Adjust the required value with the
keys.
Chrominance and sharpness are adjusted in the
same manner.
-
4.1 Changing individual sound settings
Press this key on the remote
control....
The screen displays
Explanation
Volume
Press the
tion.
key to display the last adjusted func-
1. Adjusting the volume
-
OK
30 change:
Continue pressing the
is displayed on the screen.
key until the volume field
Treble
+
-
-
-
L
OK
OK
OK
25 change
25 change
00 change
-
Adjust the required value with the
keys.
-
Bass
+
-
Press the
key a number of times until the treble
2. Adjusting the treble setting
field is displayed on the screen.
Balance
-
-
-
-
R
Adjust the required value with the
keys.
Bass, balance, sound effects and speaker sound-
mode settings are adjusted in the same manner.
Sound effects
Spatial sound On/Off
-
change
Sound-mode speaker
Mono/Stereo/Chann.1/Chann.2
change
6 9 5 - D - G B
V o l u m e
Press the
key to mute the sound.
3. Sound mute
-
OK
change
Renewed depression of the
to the previously adjusted volume.
key resets the sound
6 9 5 - D X - G B
Note: All settings modified in this menu can be stored by calling the „Video standard values“ or „Audio standard values“ menu respec-
OK
OK
tively and pressing the
key. The stored values can be recalled at any time with the
key.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Adjusting the video and audio standard values
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
Press any coloured key to step through the submenus.
Pressing the blue key selects the „Video standard
values“ submenu, pressing the yellow key selects the
„Audio standard values“ submenu
1. Call the TV menu
TV-menu
blue
Video standard values
1
2
5
8
0
3
6
9
4
7
yellow
Audio standard values
--/-
MENU
P
+
-
OK
white
green
Station settings
P
-
TV
MENU
?
Timer/childlock
A
B
AV
REC
Ȅ
red
Equipm. configuration
6 9 8 - 0 1 - G B
MENU
TV
?
return
picture
Help
Luminance, contrast, chrominance and tint* can be
2. Example 1: Call the „Video
standard values“ sub-
menu. Adjust and store
the luminance.
adjusted in the „Video standard values“ submenu.
Video standard values
Select the menu line with the value to be changed by
pressing the assigned colour keys.
blue
Luminance
Contrast
Chrominance
Tint
1
2
5
8
0
3
6
9
40
50
36
00
02
* (only if a multi-standard upgrademodule has been
installed)
4
7
yellow
white
--/-
P
+
The volume, treble, bass and balance settings, as well
as the headphones volume, can be adjusted in a simi-
-
-
OK
P
-
TV
lar manner in the „Audio standard values“ submenu.
MENU
?
-
A
B
-
+
store?
?
Adjust the desired value with the
keys.
AV
OK
REC
Ȅ
red
Sharpnes
6 9 8 - 0 4 A - G B
MENU
TV
return
picture
Help
3. Example 2: Call the „Audio
standard values“ sub-
menu. Adjust and store
the volume.
If no other video standard values or audio standard
OK
values are to be changed, then press the
store the new setting.
key to
Audio standard values
blue
Volume
1
2
5
8
0
3
6
9
48
4
7
OK
The red store box disappears when the
pressed.
key is
yellow
white
green
Treble
--/-
-
-
-
+
+
+
23
42
00
65
P
+
-
-
OK
Bass
P
-
TV
MENU
Balance
?
A
B
AV
OK
REC
Ȅ
red
Volume headphones
6 9 8 - 0 4 B - G B
store ?
OK
4. Return to TV picture
TV
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning the
function keys
5. Equipment configuration
?
The remote control handset has two factory programmed function keys A and B. Press the
key in normal television mode to reveal the
factory programming. The displayed Operator Help text describes the current programming in the last-but-one paragraph. This programming
can be changed according to your requirements in conformity with the displayed selection. This choice is described in the „Glossary“ chapter.
Example of programming function key B:
In TV mode, the B key is to activate the „subtitles“ function; in Megatext mode, you can use it for the „page stop“ function.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
1. Call the „Equipment
configuration“ menu
Equipm. configuration
blue
Function keys
1
2
5
8
0
3
6
9
4
7
yellow
Device connection
MENU
--/-
P
+
-
OK
SAT settings
P
-
TV
red
MENU
green
Language:
further
English
?
A
B
AV
REC
Ȅ
red
6 9 8 - 0 5 A - G B
MENU
TV
?
return
picture
Help
The left-hand side of this menu shows the currently
valid programming of the function keys.
2. Call the „Function keys“
menu
L
M
Functions
Television
Function keys
The window on the right-hand side indicates the
selection that can be programmed.
TV Muting -12dB
Reveal text
1
2
5
8
0
3
6
9
A
B
no function
Subtitles
Large subt.
Pict. format
Comb filter
Zoom 2:1
Sound-effects
Stereo/ch. 1-2
Muting -12dB
4
7
TV
Pict. format
Large letters
--/-
blue
P
+
-
OK
The individual functions are explained in detail in
the „Glossary“ on page 53.
P
-
TV
MENU
?
A
B
AV
REC
Ȅ
6 9 8 - 0 5 M - G B
MENU
TV
?
return
picture
Help
Two functions can be programmed for function key B.
The upper line indicates the function programmed for
TV mode, the lower line the function programmed for
Megatext mode.
3. Press the function key to be
programmed (in this exam-
ple: B key)
L
M
Functions
Television
Function keys
TV
Muting -12dB
Reveal text
1
2
5
8
0
3
6
9
A
B
no function
Subtitles
Large subt.
Pict. format
Comb filter
Zoom 2:1
Sound-effects
Stereo/ch. 1-2
Muting -12dB
VTR operation
4
7
TV
TV
Press the
key to switch between the two lines.
Pict. format
Large letters
--/-
Press the B key to display the currently programmed
function.
B
P
+
-
OK
P
-
TV
MENU
?
A
B
AV
REC
Ȅ
6 9 8 - 0 5 N - G B
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning the
function keys
5. Equipment configuration
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
P
+
4. Select the function for TV
mode (in this example
„Subtitles“)
Select the function in the right-hand field with the
or
soon as the cursor (a white bar) is moved.
P
-
key. The text on the left-hand side changes as
L
M
Functions
Television
Function keys
TV Muting -12dB
Reveal text
1
2
5
8
0
3
6
9
A
B
If the function „Subtitles“ has been programmed for
key B, the subtitles will be displayed when the TV set
is switched, if subtitles are actually transmitted with
the programme.
no function
Subtitles
Large subt.
Logo
Pict. format
Zoom 2:1
Sound-effects
Stereo/ch. 1-2
Muting -12dB
4
7
TV
Subtitles
Large letters
--/-
P
+
-
OK
P
-
P
-
P
+
TV
MENU
?
A
B
AV
REC
Ȅ
store ?
OK
6 9 6 - 0 5 O - G B
MENU
TV
?
return
picture
Help
The cursor (a white bar) is now located in the second
line, on the currently programmed function.
5. Switch to Megatext mode
and program the function
keys
L
M
Functions
Videotext
no function
Reveal text
Large letters
Stop page
Function keys
The desired Megatext functions can now be programmed
in the sequence described in steps 3 and 4, above.
TV Muting -12dB
Reveal text
1
2
5
8
0
3
6
9
A
4
7
TV
Subtit.
Stop page
--/-
B
P
+
-
TV
OK
P
-
TV
MENU
?
A
B
AV
REC
P
-
Ȅ
P
+
store ?
OK
6 9 8 - 0 5 P - G B
MENU
TV
?
return
picture
Help
6. Store the assignments and
return to the „Equipment
Configuration“ menu
Equipm. configuration
blue
Function keys
1
2
5
8
0
3
6
9
4
7
yellow
OK
Device connection
--/-
P
+
-
OK
SAT settings
P
-
MENU
TV
MENU
green
Language:
further
English
?
A
B
AV
REC
Ȅ
red
6 9 8 - 0 5 A - G B
7. Return to TV picture
TV
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for
programme change
5. Equipment configuration
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
In this menu you can define the sound functions for a
programme change.
1. Call the settings for
programme change
Prog. change settings
-
blue
No sound on PC :
Yes
Off
Off
In the first line of the menu, use the
keys to select
1
2
5
8
0
3
6
9
4
7
whether the mute function is to be retained („Yes“) or
to be cancelled („No“) when you change programmes.
yellow Spat. sound on PC :
MENU
--/-
P
+
-
OK
white
Stereo wide on PC :
P
-
TV
2x
OK
red
The new settings can be stored by pressing the
key.
MENU
?
A
B
AV
REC
Ȅ
2x
blue
store ?
OK
6 9 8 - 0 5 C - G B
MENU
-
TV
?
return
picture
Help
Use the
keys in this menu line to define whether
the spatial sound is to be switched on or off when the
programme is changed to a monaural station.
2. Set spatial sound when
changing programmes
Prog. change settings
blue
No sound on PC :
Yes
Off
Off
1
2
5
8
0
3
6
9
When in mono mode, you can change over to spatial
sound by pressing a self-defined function key (sound
effects).
4
7
yellow Spat. sound on PC :
--/-
yellow
P
+
-
OK
white
Stereo wide on PC :
P
-
TV
If no other values are to be changed, then press the
MENU
?
OK
key to store the new setting.
A
B
-
AV
REC
Ȅ
The term „spatial sound“ is explained in the section
„Glossary“ on page 53.
store ?
OK
6 9 8 - 0 5 D - G B
-
MENU
TV
?
return
picture
Help
Use the
keys in this menu line to select whether
3. Select stereo wide when
changing program
stereo wide is to be switched on or off when the pro-
gramme is changed to a stereo station.
Prog. change settings
blue
No sound on PC :
Yes
Off
Off
1
2
5
8
0
3
6
9
4
7
When in stereo mode you can change over to stereo
wide by pressing a self-defined function key (sound
effects).
yellow Spat. sound on PC :
white
--/-
P
+
-
OK
white
Stereo wide on PC :
P
-
-
TV
MENU
If no other values are to be changed, then press the
?
A
B
OK
key to store the new setting.
AV
REC
Ȅ
The term „stereo wide“ is explained in the Section
„Glossary“ on page 53.
store ?
OK
6 9 8 - 0 5 E - G B
4. Store the settings and
return to TV picture
OK
TV
17
Download from Www.Somanuals.com. All Manuals Search And Download.
RGB priority
Volume adaptation
5. Equipment configuration
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
1. Call the „Equipment
configuration“ menu
Equipm. configuration
blue
Prog. change settings
MENU
1
2
5
8
0
3
6
9
4
7
yellow
RGB priority:
Yes
--/-
P
+
2x
-
red
OK
white
Sound settings: Yes
P
-
TV
MENU
?
A
B
AV
REC
Ȅ
store ?
OK
6 9 8 - 0 5 B - G B
MENU
TV
?
return
picture
Help
The RGB priority must be set to Yes if a Pay-TV deco-
der (Premiere) is to be connected to the TV.
2. Set the RGB priority
Equipm. configuration
-
Select the setting Yes or No with the
keys.
blue
Prog. change settings
1
2
5
8
0
3
6
9
yellow
4
7
OK
Store the new settings with the
key
yellow
RGB priority:
Yes
--/-
P
+
-
OK
white
Sound settings: Yes
P
-
-
TV
MENU
?
A
B
AV
REC
Ȅ
store ?
OK
6 9 8 - 0 5 F - G B
MENU
TV
?
return
picture
Help
Some stations transmit commercials at a higher volu-
me than the normal programme. You can activate an
automatic volume adaptation function so that you do
not have to adjust the volume with the remote control
each time.
3. Activate and deactivate the
volume adaptation
Equipm. configuration
blue
Prog. change settings
1
2
5
8
0
3
6
9
white
4
7
When this function is active, differences in the volume
are automatically equalised.
yellow
RGB priority:
Yes
--/-
-
P
+
-
OK
white
Sound settings: Yes
P
-
The setting you select here applies to all programme
positions.
TV
MENU
?
A
B
AV
REC
Ȅ
store ?
OK
6 9 8 - 0 5 G - G B
4. Store the settings and
return to TV picture
TV
OK
18
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Volume adjustment and forced mono
It is possible for TV stations to be received at different volume levels although the volume level settings on the individual programme
positions are identical. To overcome this problem, you can set a volume correction factor for each programme position.
Example:
Programme 1 is soft: volume value 40. Programme 3 is loud: volume value 40. Programme 1 is to be adjusted to the same volume as
Programme 3. Switch over to programme position 1.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
In this submenu, you can assign a volume correction
factor to a programme position and, if necessary,
1. Call the sound submenu
and adjust the volume
Station table
activate forced mono sound mode.
Programme
LM
Std
Pict. Sound
-
A volume correction factor can be set with the
when the text is displayed on a blue background.
keys
white
0
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
Press the key to enter a positive correction factor
which is added to the standard volume value (increa-
sing the volume). Press the - key to enter a negative
correction factor which is subtracted from the
standard volume value (decreasing the volume).
SAT 1
red
blue
Volume adjustment
+00
Off
yellow Forced mono
white
Logo, Channel, Signal
-
698-06A-GB
In our example:
store ?
OK
Press the
key and increase the volume until it is the
same as the volume on Programme 3. The resulting
correction factor could , for example, be displayed as 05.
MENU
TV
?
return
picture
Help
It may happen that the TV set inadvertently switches
from mono to stereo during a transmission,
although no stereo programme is being received.
This usually depends upon the prevailing reception
conditions.
2. Set forced mono
Station table
Programme
LM
Std
Pict. Sound
0
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
yellow
-
SAT 1
Use the
keys to select forced mono.
blue
Volume adjustment
Forced mono
+00
Off
-
yellow
If this setting is stored, all transmissions received in
this programme position will always be reproduced in
mono.
Logo, Channel, Signal
698-06B-GB
store ?
OK
All changed settings are stored.
3. Store the setting and return
to TV picture
OK
TV
19
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1 Correcting picture deviations
It is possible for stations to be received with differing levels of chrominance, picture sharpness and contrast, even though the settings on
the individual programme positions are identical. For this reason, your TV set enables you to correct the value for each programme
position and/or to select a picture correction function (CTI, noise reduction).
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help The picture menu contains all settings which can
1. Call the first picture menu in
the station table and correct
the picture sharpness
change the picture.
Station table
Programme
LM
If the pictures received from a station are unsharp, this
Std
Pict. Sound
function permits you to correct the picture sharpness
for an individual programme position and to store this
adjustment.
0
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
SAT 1
red
The picture sharpness can be changed with the
blue
Sharpness
Noise reduction
CTI
1
A2
On
On
yellow
white
green
yellow
Comb filter
further
red
-
store ?
Logo, Channe
6 9 8 - 0 6 C - G B
OK
MENU
TV
?
return
picture
Help
This noise reduction function can be switched on if the
picture contains snow or noise.
2. Switch on the noise
reduction
Station table
Programme
LM
Std
Pict. Sound
The noise reduction function can be switched OFF or
A1, A2, or A3.
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
yellow
SAT 1
blue
-
Sharpness
Noise reduction
CTI
Comb filter
further
1
A2
On
On
yellow
white
green
red
store ?
Logo, Channe
6 9 8 - 0 6 D - G B
OK
MENU
TV
?
return
picture
Help
CTI stands for Colour Transient Improvement and
improves the transitions between different coloured
areas of the picture, making the picture appear much
sharper. The CTI function is effective for both transmis-
sions received by way of the aerial input and for signals
received via the AV sockets. CTI also provides a visible
improvement when playing back from a video recorder.
3. Switch on the CTI function
Station table
Programme
LM
Std
Pict. Sound
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
white
SAT 1
blue
Sharpness
Noise reduction
CTI
1
A2
On
On
However, in certain applications (such as playing back
from an S-VHS video recorder), the CTI function may
just have the opposite effect.
yellow
white
green
-
Comb filter
further
red
When playing back from such recorders, CTI can result
in a lower-quality picture. For this reason, this menu
permits you to switch off the CTI function for specific
programme positions.
store ?
Logo, Channe
6 9 8 - 0 6 E - G B
OK
MENU
TV
?
return
picture
Help
4. Switch on the comb filter
The comb filter removes so-called „cross-interference“
which appears as coloured moiré fringes on striped or
checked patterns in the picture.
,
Station table
Programme
LM
Std
Pict. Sound
The comb filter can be switched on or off for each pro-
gramme position in the station table.
You can also programme the comb filter on one of the
functions keys in the „Function keys“ menu. You can
then switch the comb filter on and off as desired with
this key.
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
green
SAT 1
yellow
blue
white
green
Sharpness
Noise reduction
CTI
Comb filter
further
1
A2
On
On
-
red
Use of this function for AV programme positions is not
advisable.
store ?
Logo, Channe
6 9 8 - 0 6 F - G B
OK
20
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1 Correcting picture deviations
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
In this second picture menu, the chrominance, colour
offset and contrast can be corrected individually for
each programme position.
5. Call the second picture
menu and adjust
Station table
the chrominance
Programme
LM
Std
Pict. Sound
In our example, the chrominance of Programme 1 is to
be diminished. Hold down the - key until the colour
intensity is the same as in programme position 3.
red
0
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
SAT 1
blue
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
00
0
The chrominance adjustment range is -15 to +15.
If no other values are to be changed, then press the
yellow
white
green
red
-
00
4:3
Off
OK
key to store the new setting.
Logo, Channel, Sisgntaol re ?
6 9 8 - 0 6 G - G B
OK
MENU
Normally, it is not necessary to adjust the colour offset.
TV
?
return
picture
Help
6. Adjust the colour offset
or contrast
However, if external units are connected it is possible
that colour and black-and-white pictures are not accu-
rately superimposed. A similar effect is sometimes
encountered in journals when the black-and-white
and colour impressions do not register, with the result
that the contours are blurred.
Station table
Programme
LM
Std
Pict. Sound
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
u
—
—
—
—
—
—
—
—
yellow
or
ST
blue
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
00
0
00
4:3
Off
yellow
white
green
red
The colour offset range is between -3 and +3.
The contrast adjustment range is -15 to +15.
If no other values are to be changed, then press the
white
-
Logo, Channel, Sisgntaol re ?
OK
key to store the new settings.
6 9 8 - 0 6 H - G B
OK
The picture format of each TV programme position
must be set to 4:3.
MENU
TV
?
return
picture
Help
7. Chage the picture format
Station table
Programme
LM
If a video recorder with 16:9 format detection is
connected, the picture format of the related programme
position must be set to 16:9.
Std
Pict. Sound
0
1
2
3
4
5
6
7
8
9
VTR1
ARD
ZDF
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
If a 16:9 input signal is applied to the phono sockets or
the mini-DIN (YC) socket, the picture format must be
changed manually.
green
blue
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
00
0
00
4:3
Off
yellow
white
green
red
An external switching voltage of 4-7 V at the EURO
socket automatically switches the TV to 16:9 format,
provided that the signal type was stored under the
heading „...controls AV operation“ in the menu
„Equipm. configuration, device connection“.
-
Logo, Channel, Sisgntaol re ?
6 9 8 - 0 6 I - G B
OK
8. Store all settings and return
to TV picture
OK
TV
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Camcorder ➜ video recorder
7. AV recording
In the „AV recording“ menu, you can define which of the connected peripheral AV devices are to be used for copying a recording.
AV device is a generic term for all external video units, such as video recorders, camcorders,video disk players, photo CD players, etc
which can be connected to a TV.
Example: You wish to copy a film recorded with an S-VHS/Hi8 camcorder to an S-VHS/Hi8 video recorder which is also connected to the
TV set.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
In the „AV recording“ menu , you can select how the
AV devices connected to your TV set (see Section 13,
„Equipment configuration/Connecting external devices“)
are to be used for copying a recording.
1. Call the AV menu
AV-recording
Input
Output
The left side of the menu (Input) shows the devices
which supply picture and sound for the copy operation.
blue Video Rec.2
Video Rec.2
Video Rec.1
Camcorder
yellow
Video Rec.1
AV
white
Camcorder
Selection of an input for a programme is meaningful
only for SAT or decorder operation.
red
Pr. 1: ARD
The right side of the menu (Output) shows the devices
capable of recording the picture and sound.
no recording
6 9 8 - 0 7 A - G B
A Device connection
MENU
TV
?
return
picture
Help
After calling this menu, you must first select the input
device, i.e. the device which is to supply the picture.
Once you have done this, the cursor moves to the out-
put side of the menu and the keys are displayed in
colour. If there is more than one AV device shown on
the output side, you must select the desired device
manually. If you make a mistake, you can switch
2. Select the desired AV devi-
ces (in this example: Cam-
corder and Video Rec. 1)
AV-recording
-
Input
Output
blue
Video Rec.2
Video Rec.1
Camcorder
Video Rec.2
Video Rec.1
Camcorder
white
yellow
white
between the input and output sides of the menu with
-
yellow
the
keys.
red
Pr. 1: ARD
Back to the example:
EURO3:
Video
EURO2:
Video
You want to copy the film from the camcorder to video
recorder 1.
Camcorder ➜ Video Rec.1
record ?
6 9 8 - 0 7 B - G B
OK
Press the white key to display the signal from the
camcorder on the screen. Then press the yellow key to
select the output device.
A Device connection
The copy operation with the selected devices is now
active.
3. Store the settings and clear
the menu
If any subsequent switching operations could interfere
with copying, a warning box with the text „AV recor-
ding“ will be displayed and the requested switching
operation will not be executed.
OK
TV
AV
To check the progress of the operation, press the
key to display the picture from the input device on the
screen.
4. Terminate or abort the
copy operation
If you wish to execute the copy operation in standby
mode, you can switch the TV set to this mode by pres-
sing the
key.
AV
OK
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Video recorder ➜ video recorder
7. AV recording
Example: You wish to copy a film from video recorder 1 to video recorder 2.
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
1. Call the AV menu
AV-recording
Input
Output
blue Video Rec.2
Video Rec.2
Video Rec.1
Camcorder
AV
yellow
Video Rec.1
white
Camcorder
red
Pr. 1: ARD
no recording
6 9 8 - 0 7 A - G B
A Device connection
MENU
TV
?
return
picture
Help
After calling the menu, you must first select the input
device which is to supply the picture. In our example,
you select video rec. 1 by pressing the yellow key.
2. Select the desired AV device
(in this example:
video rec. 1)
AV-recording
-
Input
Once you have done this, the cursor moves to the out-
put side of the menu and video rec. 2 is selected auto-
matically, since there is no other choice.
Output
blue
Video Rec.2
Video Rec.1
Camcorder
Video Rec.2
Video Rec.1
Camcorder
yellow
white
yellow
If, however, there were a further video recorder
connected to the EURO 3 socket, you would have to
select the desired device with the related key.
red
Pr. 6: RTL2
EURO2:
Video
EURO1:
Video
Video Rec.1 ➜ Video Rec.2
record ?
6 9 8 - 0 7 C - G B
OK
A Device connection
The copy operation with the selected devices is now
active.
3. Store the settings and
clear the menu
If any subsequent switching operation could interfere
with copying, a warning box with the text „AV recor-
ding“ will be displayed and the requested switching
operation will not be executed.
OK
TV
AV
To check the progress of the operation, press the
key to display the picture from the input device on the
screen.
If you wish to execute the copy operation in standby
mode, you can switch the TV set to this mode by pres-
sing the
key.
4. Terminate or abort the
copy operation
AV
OK
TV picture
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch-on/off and
reminder time
8. Time settings
In the „Time settings“ menu, you can enter settings which will instruct the TV to switch itself on or off, and to display a reminder at a given time.
Switching from summer time to winter time and vice versa is carried out automatically by the teletext clock.
The switch-on time function will automatically turn on the TV at the preset time if the television is in standby mode. The switch-off time
function will automatically switch it off as desired. The reminder service is intended to help you remember things which you have to do
later on, for instance a telephone call. All three settings can be jointly programmed.
Example: The TV is to switch itself on at 20:00 hr, remind you of something at 21:45 hr, and switch itself off at 23.30 hr.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
The adjoining picture shows the appearance of the
„Time settings“ menu when no times have been pro-
grammed.
1. Call the „Time settings“
menu
Time settings
blue
Switch-on time:
Switch-off time:
Reminder time
Time of day:
Off
1
2
5
8
0
3
6
9
4
7
MENU
yellow
white
green
Off
--/-
P
+
-
OK
-- : --
P
-
green
TV
MENU
08 : 22
?
A
B
AV
blue
REC
Ȅ
6 9 8 - 0 8 A - G B
MENU
TV
?
return
picture
Help
If you press the blue key, the text in the first line is dis-
played on a blue background.
2. Enter the switch-on time
(Example: 20.00 hr)
-
Time settings
Now press the or the key to switch on the function.
blue
yellow
white
green
Switch-on time:
Switch-off time:
Reminder time
Time of day:
20:00
Enter the desired switch-on time with the numeric
keys. The function is activated after input of the last
digit. Henceforth the TV set will switch itself on every
day at the preprogrammed time.
1
2
5
8
0
3
6
9
4
7
blue
Off
--/-
P
+
-
OK
-- : --
P
-
-
TV
MENU
08 : 22
?
When the set has switched itself on automatically,
you must press any key you choose on the remote
control, otherwise the set will return to standby
mode after about 10 min. This is a safety precaution
to ensure that the television does not stay on if
you are not at home.
A
B
AV
REC
Ȅ
6 9 8 - 0 8 B - G B
2
0
0
0
MENU
TV
?
return
picture
Help If you press the yellow key, the text in the second line
3. Enter the switch-off time
(Example: 23.30 hr)
is displayed on a yellow background.
Time settings
-
Now press the or the key to switch on the function.
blue
yellow
white
green
Switch-on time:
20:00
1
2
5
8
0
3
6
9
Enter the desired switch-off time with the numeric
keys. The function is activated after input of the last
digit.
4
7
Switch-off time: 23:30
yellow
--/-
P
+
-
OK
Reminder time
Time of day:
-- : --
P
-
The switch-on/switch-off times can be deleted with
TV
-
MENU
-
the
keys (function OFF).
08 : 22
?
A
B
AV
REC
Ȅ
6 9 8 - 0 8 C - G B
3
2 3
0
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch-on/off and
reminder time
8. Time settings
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
If you press the white key, the text in the third line is
displayed on a white background.
4. Enter the reminder time
(Example: 21.45 hr)
Time settings
nter the desired reminder time with the numeric keys.
The function is activated after input of the last digit.
blue
yellow
white
green
Switch-on time:
20:00
1
2
5
8
0
3
6
9
4
7
-/--
Switch-off time: 23:30
The reminder time can be deleted with the
key.
white
--/-
P
+
-
OK
Reminder time
Time of day:
21:45
P
-
TV
MENU
08 : 22
?
2
1
4
5
A
B
AV
REC
Ȅ
6 9 8 - 0 8 D - G B
At the programmed time, a box with the text „Hallo“ is
displayed on the screen if the TV set is switched on.
OK
OK
TV
This box disappears if you press the
or
key or
switch to a different programme position.
or
TV
Hallo
MENU
TV
?
return
picture
Help
If you switch to a programme position in which teletext
has been stored, the current time automatically
5. Enter the time manually
(Example: 14.24 hr)
Time settings
appears in this menu and the green key is not displayed
.
In such a case the time setting cannot be changed.
blue
yellow
white
green
Switch-on time:
Switch-off time:
Reminder time
Time of day:
Off
1
2
5
8
0
3
6
9
4
7
If, for the reason stated above, the clock is to be set
manually, simply enter the time with four digits.
Off
green
--/-
P
+
-
OK
--:--
--:--
P
-
TV
MENU
?
1 4
2
4
A
B
AV
REC
Ȅ
6 9 8 - 0 8 E - G B
From the standby mode, the TV set will switch itself on
at 20.00 hr, remind you of the telephone call you wish
to make at 21.45 hr, and switch back to standby mode
at 23.30 hours.
6. Switch to standby mode
TV picture
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on
8.1 Childlock
Your TV set can be protected against unauthorized use. It is possible to prevent any use of the television at all or to permit viewing of up to
five specific programmes. Consequently, the childlock can be set to prevent a child from seeing violent films, yet still provide access to
children’s programmess on selected channels. Access to such permitted programmes can be provided in general or within a specified
period of time.
Example: The children shall only be allowed to watch programmes on the programme positions 01, 02 and 05 from 14.00 to 18.00 hr.
Access to all other programme positions shall be excluded.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
1. Call the „Timer/childlock“
menu
Timer/childlock
blue
Time settings
1
2
5
8
0
3
6
9
4
7
MENU
yellow
white
Childlock
--/-
P
+
-
OK
Timer recording
Basic setting of MVS
P
-
green
TV
MENU
?
A
B
AV
REC
Ȅ
6 9 8 - 0 8 F - G B
-
MENU
TV
?
return
picture
Help
The childlock can be switched on and off with the
2. Call the „Childlock“
submenu and switch on
the childlock
keys. If you set the childlock to „ON“, you must also ent-
er a 4-digit personal code number.
Childlock
blue
Childlock. . . . .
Off
If the childlock has been set previously, this setting
will be used and the television switches to standby
mode.
1
2
5
8
0
3
6
9
4
7
yellow
white
P-e-rmi-tt-ed-p-rog-r-am-m-es:
--/-
yellow
blue
P
+
-
The TV set can now still be switched on, but programmes
will not be shown on the screen. Instead the „Childlock“
menu will be displayed with the cursor on the „Enter
code“ line.
OK
- - - -
Enter code . . . . :
Begin viewing . :
End viewing . . . :
P
-
TV
MENU
- -
:
:
-
-
?
green
red
A
B
AV
REC
Ȅ
-
- -
-
The childlock can be turned off again by entering the
4-digit personal code number. The TV is automatically
switched to standby mode after approx. 10 minutes if it
has not been switched off manually in the meantime.
6 9 8 - 0 8 G - G B
-
MENU
TV
?
return
picture
Help
A maximum of 5 programme positions can be entered
to which access is permitted.
3. Select and store permitted
programmes
Childlock
These programme positions are entered with the
numeric keys; all entries can be erased with the
key.
-/--
yellow
blue
Off
Childlock. . . . .
1
2
5
8
0
3
6
9
4
7
yellow
white
Permitted programmes:
01 02 05 -- --
Back to the example:
1
4
7
2
5
8
3
6
9
--/-
P
+
Enter two digits for each programme position that may
be watched. In our example the child has access to the
programme positions 01, 02 and 05.
-
OK
- - - -
Enter code . . . . :
Begin viewing . :
End viewing . . . :
P
-
TV
MENU
- -
:
-
?
green
red
A
B
Before continuing with the next programming steps,
the permitted programme positions entered above
must be stored; otherwise the entries will be lost.
AV
REC
Ȅ
-
- -
:
-
store?
6 9 8 - 0 8 H - G B
0
OK
OK
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on
8.1 Childlock
Press this key on the remote
control....
The screen displays
Explanation
MENU
TV
?
return
picture
Help
Enter your personal 4-digit code at this point.
4. Enter your personal code
The digits are entered with the numeric keys. The
entered code number is NOT displayed!
Childlock
blue
Off
Childlock. . . . .
1
2
5
8
0
3
6
9
Ask your local dealer for help if you have forgotten
your personal code number.
white
4
7
yellow
white
green
Permitted programmes:
01 02 05 -- --
--/-
P
+
-
OK
- - - -
--:--
1
4
7
2
5
8
0
3
6
9
Enter code :
P
-
TV
MENU
--
--
:
--
--
?
Begin viewing . :
End viewing . . . :
A
B
AV
REC
Ȅ
red
:
6 9 8 - 0 8 I - G B
MENU
TV
?
return
picture
Help
Here you can enter the times between which viewing
of the permitted programmes is allowed.
5. Enter the beginning and
end of the viewing period
Childlock
The TV is not automatically switched on at the begin-
ning of this period; it is, however, automatically swit-
ched off at the end of it.
blue
Off
Childlock. . . . .
1
2
5
8
0
3
6
9
4
7
yellow
white
green
Permitted programmes:
01 02 05 -- --
green
--/-
1 4 0 0
If no permitted programmes have been entered all TV
transmissions within this period can be viewed.
P
+
-
OK
- - - -
Enter code :
P
-
TV
MENU
14:00
18:00
?
Begin viewing . :
End viewing . . . :
red
A
B
1 8 0 0
AV
REC
Ȅ
red
6 9 8 - 0 8 J - G B
The childlock is activated when the set is switched off
with the
key or with the ON/OFF key.
6. Activate the childlock
Switching off
8.1 Childlock
MENU
TV
?
return
picture
Help
Entry of the personal code number switches off the
childlock and the selected programme is displayed on
the screen.
Call the TV menu and enter
your personal code
Childlock
blue
Off
Childlock. . . . .
1
2
5
8
0
3
6
9
4
7
1
4
7
2
5
8
0
3
6
9
Ask your local dealer for help if you have forgotten
your personal code number.
yellow
white
green
Permitted programmes:
01 02 05 -- --
--/-
P
+
-
OK
- - - -
--:--
Enter code :
P
-
TV
MENU
--
--
:
--
--
?
Begin viewing . :
End viewing . . . :
A
B
AV
REC
Ȅ
red
:
6 9 8 - 0 8 I - G B
27
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2 Recording with the timer
The menu „Timer recording“ is intended primarily for recording Pay-TV programmes (e.g. Premiere) in cases where the decoder is
connected to a EURO socket of the TV set.
8 timers can be programmed up to 2 months in advance.
Example: A VHS video recorder which has only one EURO socket is connected to the EURO 1 socket of the TV, while a Pay-TV decoder is
connected to the EURO 3 socket. You now wish to record a film running on the Pay TV channel.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
If no timers have been programmed before, the table
in the menu is empty. If you have previously program-
med timer recordings, these will be displayed in the
table.
1. Call the „Timer recording“
menu
Timer recording
Prog.
Time of day
VPS
Date
The current time of day and the current date are nee-
ded for programming in the timer menu. The time is
normally obtained from the Megatext function and the
date from the VPS signal. Note that some stations do
not transmit VPS signals and/or Megatext.
- -
—
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
MENU
green
If the time and/or date are not detected automati-
cally, you must enter them manually.
white
enter date
19.03.
14:20
6 9 8 - 0 8 K - G B
MENU
TV
?
return
picture
Help
The month, the day, the hours and the minutes must
each be entered in the form of two digits, e.g. 01.09
for September 1 and 09:00 for 9 AM.
2. Enter the date and time of
the film to be recorded
(see example)
Timer recording
Prog.
Time of day VPS
Date
If you make a mistake when entering the date and
—
—
—
—
—
—
—
—
—
—
25 PREMI
09.03
20:15
—
—
—
—
—
—
—
—
—
—
22:10
time, you can delete the entry in the current column or
1
4
7
2
5
8
0
3
6
9
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
-/--
the entire line by pressing the
key. The entire line
can be deleted only if the key symbols at the top of the
menu are displayed in colour.
Timer recordings are not possible if the childlock
is switched on.
enter date
6 9 8 - 0 8 L - G B
19.03.
14:20
MENU
TV
?
return
picture
Help
At the moment, PAY TV stations do not transmit a VPS
signal.
3. Store the programmed data
and return to the TV picture
or standby mode
Timer recording
The recording can be aborted at any time by pres-
Date
Time of day
Prog.
VPS
AV
OK
TV
sing the keys
,
and
sequentially, in
—
—
—
—
—
—
—
—
—
—
25 PREMI
09.03
20:15
—
—
—
—
—
—
—
—
—
—
22:10
--
—
—
—
—
—
—
—
—
—
.
.
.
.
.
.
.
.
.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
-/--
this order, or by pressing the
timer menu displayed.
key with the
OK
The same data must must also be entered on the
AV programme position of the video recorder or
on a programme position where the video recorder
does not receive a station.
or
TV
enter date
6 9 8 - 0 8 M - G B
19.03
.
14:20
28
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Connecting headphones
Headphones can be connected to the TV by way of the connecting socket underneath the fascia cover at the front. The socket will only
accept headphones with a 3,5 mm jack plug ( Elba 6,35 mm ).
We recommend the use of headphones with an impedance of at least 32 Ohms. Headphones of a lower impedance (down to approx.
8 Ohms) will impair the sound quality.
The headphones volume can be stored as a standard value. The headphones and the TV speakers can be used together.
In the event of 2-channel sound transmissions it is possible to listen to either channel 1 or 2 on the headphones, irrespective of the
channel set for the TV speakers.
Volume
9. Headphones
Press this key on the remote
The screen displays
Explanation
control....
It is advisable to switch off the TV speakers with the
key when adjusting the volume for the headphones.
1. Switch off the TV speakers
and adjust the headphones
volume
Press the yellow key to display the bar for the head-
phones volume.
-
Adjust the volume with the
keys.
Volume headphones
65
-
OK
change
6 9 5 - D X X - G B
-
MENU
TV
?
return
picture
Help
The standard value for the headphones volume can
only be stored by way of the TV menu.
2. Store the headphones volu-
me as a standard value
Audio standard values
All standard values can be stored in the „Audio stan-
dard values“ submenu.
blue
Volume
1
2
5
8
0
3
6
9
48
MENU
4
7
The volume has already been adjusted (see step 1).
yellow
white
green
Treble
--/-
-
-
-
+
+
+
23
42
00
65
OK
P
+
It is now only necessary to press the
the headphones volume.
key to store
-
OK
Bass
P
-
TV
MENU
Balance
?
A
B
AV
OK
REC
Ȅ
red
Volume headphones
6 9 8 - 0 9 A - G B
store ?
OK
3. Return to TV picture
TV
TV picture
With 2-channel sound transmissions it is possible to
select either channel 1 or channel 2.
Sound mode selection for
headphones
If headphones are connected, it is possible to listen,
for example, to the English sound track on the spea-
kers (channel 1) and to the other language on the
headphones (channel 2).
Sound-mode headphones
-
OK
change
Stereo / Chann.1 / Chann.2
2 x
6 9 8 - B 1 5 - G B
This setting can also be called by pressing repeatedly
the yellow key.
The desired channel can then be selected with the
-
keys..
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic functions
10. Megatext
Press this key on the remote
control....
The screen displays
Explanation
MENU
OK
?
Help
TV-picture
View page
The Megatext file displays all the subjects available on
a specific programme position and the chapters belonging
to the currently selected subject.
1. Call Megatext
TOP
MEGATEXT
Börse
Wetter
ARD-Programm
The range of subjects and chapters depend on the
transmitting station and can therefore be completely
different in each programme position.
Football
Bundesligen
Fußball
Hinweise
VT-Redaktion
VT-Zentrale
TV
Sport
Aktuelles
Index
For some stations, for example, only numbers, rather
than the header lines, appear in the Megatext file.
Übersicht
Inhalt
Subj.
Chapter
on subject
Each time the blue key is pressed, the next subject is
selected and the corresponding file card is raised. Pro-
longed depression of the blue key raises all of the sub-
jects sequentially.
2. Select a subject
MENU
OK
?
Help
TV-picture
View page
TOP
MEGATEXT
Börse
Wetter
ARD-Programm
Football
Bundesligen
Fußball
Press the right side of the key to step backwards
through the subjects, or the left side of the key to step
forwards.
übermorgen
jetzt im TV
morgen
blue
Sport
Aktuelles
heute
The displayed choice of chapters is adapted to the
currently selected subject.
Inhalt
Übersicht
Subj.
Chapter
on subject
Each time the yellow key is pressed, the next chapter
is selected and the corresponding file card is raised.
3. Select a chapter
MENU
OK
?
Help
TV-picture
View page
TOP
MEGATEXT
Börse
Wetter
Press the right side of the key to step backwards, or
the left side of the key to step forwards.
ARD-Programm
Football
Bundesligen
Fußball
Prolonged depression of the yellow key raises all the
chapters sequentially.
übermorgen
jetzt im TV
morgen
yellow
Sport
Aktuelles
heute
Inhalt
Chapter
on subject
Übersicht
Subj.
6 9 5 - M T 1 - 3 - G B
MENU
The first page of the selected subject and chapter is
displayed.
AV
Ȅ new
?
next
Mark:
Card index
Help
4. Open the first page
of the chapter
300 ARD/ZDF Mi. 29.09.93 13:49:00
ARD
File symbols with arrows in the bottom line indicate
that the corresponding coloured keys will activate sub-
ject-by-subject, chapter-by-chapter or page-by-page
leafing.
HEUTE
vormittag
301
JETZT IM
nachmittag 302
abend 303/304
PROGRAMM . . . 333
OK
WOCHEN-
MORGEN
ÜBERSICHT . . .
EINS PLUS . . .
360
370
vormittag
321
nachmittag 322
abend 323/324
The blue text window shows the name of the currently
selected subject, while the yellow shows the name of
the currently selected chapter.
PROGRAMM-
BEGLEITUNG . .
ÜBERMORGEN
390
vormittag
341
nachmittag 342
abend 343/344
UT-VORSCHAU . 398
ARD-Programm
heute
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic functions
10. Megatext
Press this key on the remote
control....
The screen displays
Explanation
This function enables you to run through the individual
pages. Just as in a book, you can leaf forwards or
backwards from the displayed page.
MENU
AV
Ȅ
new
301 ARD/ZDF Mi. 5.10.93 10:52:00
Dienstag,
?
next
Mark:
Card index
Help
5. Page-by-page leafing
5. Oktober 1993
ARD
Press the right side of the key to step backwards, and
the left side of the key to step forwards.
05.55
06.00
09.00
09.03
09.45
10.00
10.03
10.45
11.00
11.03
Käpt'n Blaubär
ARD-Morgenmagazin
Tagesschau
Dallas
Tele-Gym
Tagesschau
auslandsjournal
ZDF-Info Gesundheit
Tagesschau
white
Cappuccino Melange
Fernsehfilm, 1993 . . . . . . .
Umschau
307
313
12.35
12.55
13.00
13.05
Presseschau
Tagesschau
ARD-Mittagsmagazin . . . .
bis 13.45 Uhr
Nachmittagsprogramm auf 302
ARD-Programm
heute
MENU
AV
Ȅ
new
?
next
This function enables you to run through the individual
chapters.
Mark:
Card index
Help
6. Chapter-by-chapter leafing
321 ARD/ZDF Di. 12.10.93 10:54:00
Mittwoch,
Each time you press the yellow key, the first page of
the next or previous chapter is opened.
13. Oktober 1993
ARD
05.55
06.00
09.00
09.03
09.45
10.00
10.03
10.35
JOYrobic
ZDF-Morgenmagazin
heute
Press the right side of the key to step backwards, and
the left side of the key to step forwards.
Dallas
Tele-Gym
heute
. . . . . . .
Gott und die Welt
ZDF-Info
326
327
Arbeit und Beruf
heute
11.00
11.03
Männer im gefährlichen
Alter
. . . . . . . .
Spielfilm, D 1953
Umschau
Presseschau
bis 13.00 Uhr
yellow
12.30
12.55
Nachmittagsprogramm auf 322
ARD-Programm morgen
MENU
Each time you press the blue key, the first page of the
next or previous subject is opened. In most cases, this
will be an index page.
AV
Ȅ
new
?
next
Mark:
Card index
Help
7. Subject-by-subject leafing
400 ARD/ZDF Di. 12.10.93 10:52:00
W E T T E R
Press the right side of the key to step backwards, and
press the left side of the key to step forwards.
Ü B E R S I C H T
Deutschland
Wettervorhersage . . . . . . . . . . . . 401
. . . . .
. . . . .
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
402
403
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
404
405
406
407
. . . . . . . .
blue
. . . . . . . . .
. . . . . . . . .
Wassertemperaturen
. . . . . . . . . . .
Temperaturen international . . . . . . . . 408
Quelle: METEO CONSULT / DWD
Wetter
Inhalt
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Multiple pages
10. Megatext
Press this key on the remote
control....
The screen displays
Explanation
MENU
AV
Multiple pages are indicated by a dark bar with the
subpage numbers on the left-hand side of the display-
ed page.
Ȅ
new
?
next
Mark:
Card index
Help
1. Recognizing multiple pages
422 ARD/ZDF Di. 12.10.93
börse fran1k3:0f8:u00 rt
/1
/2
Fortlaufende Notierungen
12.10.93
1/4
Vortag
The bright numbers indicate the number of subpages
contained in this multiple page. The number of sub-
pages is transmitted by the stations at intervals of 20
seconds. Consequently, it may take some time until all
subpage numbers are displayed.
Kassa
/3
/4
AEG
164,8
1270,0
532,0
2709,0
578,0
891,0
263,0
312,0
470,0
493,0
589,0
518,0
164,8
1270,0
529,0
2710,0
578,0
894,0
263,8
312,7
470,5
491,0
591,0
518,0
165,0
1270,0
528,0
2730,0
578,0
875,0
267,0
316,5
472,0
496,5
596,0
524,0
/5
AMB
/6
AGIV
/7
Allianz
Altana
Asko
/8
/9
/10
/11
/12
/13
/14
BSAF
Bayer
Bay. Hypo
BHF-Bank
BMW
If there are more than 15 subpages, the cursor (white
P
-
bar) can be moved downwards with the
key to dis-
/15 Bay. Verbank
>>
play the next group of subpage numbers (for example
/16 to /30).
ohne Gewähr
Börse
Kurse Ffm.
Some stations do not provide multiple page identifica-
tion; in this case, the subpages are displayed sequen-
tially. To stop a page for reading, one of the A or B fun-
ction keys must be programmed with the „Stop page“
function in Megatext mode. Renewed depression of
the „Stop page“ function key advances to another
subpage (the one the station is currently transmitting).
P
-
MENU
AV
Ȅ
new
?
next
P
+
Mark:
Card index
Help
Use the
keys to move the cursor (white bar)
2. Selecting subpages
422 ARD/ZDF Di. 12.10.93
börse fran1k3:0f8:u00 rt
up or down. The subpage selected with the cursor is
displayed on the screen.
/1
/2
Fortlaufende Notierungen
12.10.93
2/4
Kassa
Vortag
The numbers in the top right corner of the displayed
page (in this example 2/4) indicate the currently dis-
played subpage and the total number of subpages (in
the example: subpage 2 of a total of 4 pages).
/3
/4
Commerzbank 325,0
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
/5
Continental
Daimler
225,6
741,5
384,5
206,5
808,4
579,0
430,5
123,5
580,0
1125,0
285,5
935,0
/6
/7
P
-
Degussa
Dt. Babcock
Dt. Bank
Douglas
P
+
/8
/9
/10
/11
/12
/13
/14
/15
>>
Dresdn. Bk.
FAG
Henkel Vz.
Hochtief
Hoechst
Holzmann
ohne Gewähr
Börse
Kurse Ffm.
Page selection by cursor
10. Megatext
MENU
-/--
AV
Ȅ
new
?
next
Mark:
Card index
Help
Use the
key to move the cursor (coloured bar)
downwards through the page numbers. The page
300 ARD/ZDF Mi. 29.09.93 13:49:00
number highlighted by the cursor can be directly called
-/--
OK
ARD
with the
key.
HEUTE
vormittag
301
JETZT IM
nachmittag 302
abend 303/304
PROGRAMM . . . 333
WOCHEN-
MORGEN
ÜBERSICHT . . .
EINS PLUS . . .
360
370
vormittag
321
nachmittag 322
abend 323/324
OK
PROGRAMM-
ÜBERMORGEN
BEGLEITUNG . .
390
vormittag
341
nachmittag 342
abend 343/344
UT-VORSCHAU . 398
ARD-Programm
heute
6 9 4 - 0 0 G - D
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct page selection
10. Megatext
Press this key on the remote
control....
The screen displays
Explanation
Select a file card for any desired subject.
MENU
OK
?
Help
TV-picture
View page
1. Select the subject
TOP
MEGATEXT
Continue pressing the blue key to run through the file-
card box.
Börse
Wetter
ARD-Programm
The displayed choice of chapters is adapted to the
selected subject.
Football
Bundesligen
Fußball
übermorgen
jetzt im TV
morgen
Sport
blue
Aktuelles
heute
Inhalt
Übersicht
Subj.
Chapter
on subject
6 9 5 - M T 2 - G B
MENU
OK
?
Help
TV-picture
View page
Select a file card for any desired chapter.
TOP
MEGATEXT
2. Select the chapter
Börse
Wetter
Continue pressing the yellow key to run through the
file-card box.
ARD-Programm
Football
Bundesligen
Fußball
Sport
übermorgen
jetzt im TV
morgen
Aktuelles
heute
yellow
Inhalt
Übersicht
Subj.
Chapter
on subject
6 9 5 - M T 3 - G B
The first page of the selected subject and chapter is
displayed.
MENU
AV
Ȅ
new
?
next
Mark:
Card index
Help
3. Open the first page
of the chapter
301 ARD/ZDF Mi. 5.10.93 10:52:00
Dienstag,
5. Oktober 1993
ARD
05.55
06.00
09.00
09.03
09.45
10.00
10.03
10.45
11.00
11.03
Käpt'n Blaubär
ARD-Morgenmagazin
Tagesschau
Dallas
Tele-Gym
OK
Tagesschau
auslandsjournal
ZDF-Info Gesundheit
Tagesschau
Cappuccino Melange
Fernsehfilm, 1993 . . . . . . .
Umschau
307
313
12.35
12.55
13.00
13.05
Presseschau
Tagesschau
ARD-Mittagsmagazin . . . .
bis 13.45 Uhr
Nachmittagsprogramm auf 302
ARD-Programm
heute
After depression of the first numeric key, the num-
ber of this key, followed by two hyphens, appears at
the top left of the screen. Enter the complete 3-digit
number. A green line with the text „Wait for page ...“
is displayed at the top of the screen after the last
digit has been entered. A red line with the message
„Page is not transmitted“ is displayed if the entered
page number does not exist. Otherwise the TV searches
for the specified page and displays it as soon as it is
located.
MENU
AV
Ȅ
new
?
next
Mark:
Card index
Help
4. Enter the page number
e.g. page 422
422 ARD/ZDF Di. 12.10.93
börse fran1k3:0f8:u00 rt
/1
/2
Fortlaufende Notierungen
12.10.93
1/4
Kassa
Vortag
/3
/4
AEG
164,8
1270,0
532,0
2709,0
578,0
891,0
263,0
312,0
470,0
493,0
589,0
518,0
164,8
1270,0
529,0
2710,0
578,0
894,0
263,8
312,7
470,5
491,0
591,0
518,0
165,0
1270,0
528,0
2730,0
578,0
875,0
267,0
316,5
472,0
496,5
596,0
524,0
/5
AMB
/6
AGIV
/7
4 2 2
Allianz
Altana
Asko
/8
/9
/10
/11
/12
/13
/14
BSAF
Bayer
Bay. Hypo
BHF-Bank
BMW
/15 Bay. Verbank
>>
ohne Gewähr
Börse
Kurse Ffm.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct page selection
10. Megatext
Press this key on the remote
control....
The screen displays
Explanation
5. Return to TV picture
TV
Return to last index page
10. Megatext
MENU
AV
Ȅ new
?
Press the 0 key to return to the previous numerically
called page or, if not numerically called, to the index
page of the displayed choice.
next
Mark:
Card index
Help
Return to last index page
300 ARD/ZDF Mi. 29.09.93 13:49:00
ARD
HEUTE
vormittag
301
JETZT IM
The adjoining picture shows the index page of the ARD
channel as an example.
nachmittag 302
abend 303/304
PROGRAMM . . . 333
WOCHEN-
MORGEN
0
ÜBERSICHT . . .
EINS PLUS . . .
360
370
vormittag
321
nachmittag 322
abend 323/324
PROGRAMM-
ÜBERMORGEN
BEGLEITUNG . .
390
vormittag
341
nachmittag 342
abend 343/344
UT-VORSCHAU . 398
ARD-Programm
heute
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Doubling the font size
10. Megatext
Press this key on the remote
control....
The screen displays
Explanation
When the B* key is pressed for the first time, the upper
part of the selected page is displayed with the font size
doubled.
300 ARD/ZDF Mi. 29.09.93 13:49:00
1. Select double font size,
e.g. press the B* key
You can scroll slowly through the page by holding
down the key.
ARD
HEUTE
*
* The B key was programmed in the factory for this
function, but this programming can be changed (see
Section „Equipment configuration - Assigning the
function keys“).
A
B
vormittag
301
JETZT IM
nachmittag 302
abend 303/304
PROGRAMM . . . 333
WOCHEN-
MORGEN
HEUTE
When the B* key is pressed for the second time, the
displayed page is scrolled upwards.
vormittag
301
2. Scroll the page upwards,
e.g. press the B* key
JETZT IM
nachmittag 302
abend 303/304
PROGRAMM . . . 333
WOCHEN-
MORGEN
ÜBERSICHT . . .
360
370
*
A
B
vormittag
321
nachmittag 322
abend 323/324
EINS PLUS . . .
PROGRAMM-
ÜBERMORGEN
BEGLEITUNG . .
390
HEUTE
When the B* key is pressed for the third time, the dis-
played page is scrolled further, and so on.
3. Scroll the page further,
e.g. press the B* key
vormittag
301
JETZT IM
nachmittag 302
abend 303/304
PROGRAMM . . . 333
WOCHEN-
MORGEN
ÜBERSICHT . . .
EINS PLUS . . .
360
370
*
A
B
vormittag
321
nachmittag 322
abend 323/324
PROGRAMM-
ÜBERMORGEN
BEGLEITUNG . .
390
Press the B* key for a fifth time to return to normal font
size.
300 ARD/ZDF Mi. 29.09.93 13:49:00
4. Return to normal font size
ARD
HEUTE
vormittag
301
JETZT IM
PROGRAMM . . . 333
nachmittag 302
abend 303/304
WOCHEN-
MORGEN
ÜBERSICHT . . .
360
370
vormittag
321
*
A
B
nachmittag 322
abend 323/324
EINS PLUS . . .
PROGRAMM-
ÜBERMORGEN
BEGLEITUNG . .
390
vormittag
341
nachmittag 342
abend 343/344
UT-VORSCHAU . 398
ARD-Programm
heute
* Depending on the assignment of the
function keys. The factory setting is B.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Infotext - Setting marks
10. Megatext
There will be certain Megatext pages, e.g. stock market, news, weather forecast, etc., that you will want to read repeatedly. We have pro-
grammed a way of making it easier to read such pages.
10 marks per position can be set on each of the first ten programme positions. These marks can be set on any desired text page of your
choice, and they can be erased at any time. After marks have been assigned to a programme position it will be possible to step sequentially
INFO
through the marked pages with the
key. Marks can also be set on all programme positions above Pr 10, but these marks are
ķ
erased when you switch to another programme position.
Press this key on the remote
The screen displays
Explanation
control....
MENU
AV
Ȅ new
?
next
Mark:
Card index
Help
1. Call the desired page
e.g. page 400
400 ARD/ZDF Di. 12.10.93 10:52:00
W E T T E R
Ü B E R S I C H T
4
0 0
Deutschland
Wettervorhersage . . . . . . . . . . . . 401
. . . . .
. . . . .
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
402
403
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
404
405
406
407
. . . . . . . .
. . . . . . . . .
. . . . . . . . .
Wassertemperaturen
. . . . . . . . . . .
Temperaturen international . . . . . . . . 408
Quelle: METEO CONSULT / DWD
Wetter
Inhalt
MENU
AV
Ȅ new
?
next
Mark:
If marks have not yet been set in this programme
position, then press the red key to set the 1st mark.
Card index
Help
2. Set the first mark
MARKE 1 400 ARD/ZDF Di. 12.10.93 10:52:00
„MARK 1“ is displayed in green lettering in the top left-
hand corner of the screen.
W E T T E R
Ü B E R S I C H T
red
Deutschland
Wettervorhersage . . . . . . . . . . . . 401
. . . . .
. . . . .
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
402
403
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
404
405
406
407
. . . . . . . .
. . . . . . . . .
. . . . . . . . .
Wassertemperaturen
. . . . . . . . . . .
Temperaturen international . . . . . . . . 408
Quelle: METEO CONSULT / DWD
Wetter
Inhalt
MENU
AV
Ȅ new
?
next
Mark:
Card index
Help
In the ARD channel, for example, page 422 is a multiple
page.
3. Select the next page
e.g. 422
422 ARD/ZDF Di. 12.10.93
börse fran1k3:0f8:u00 rt
With multiple pages, marks can be set on any subpage
.
/1
/2
Fortlaufende Notierungen
12.10.93
2/4
Kassa
Vortag
/3
/4
Commerzbank 325,0
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
/5
Continental
Daimler
225,6
741,5
384,5
206,5
808,4
579,0
430,5
123,5
580,0
1125,0
285,5
935,0
/6
/7
Degussa
Dt. Babcock
Dt. Bank
Douglas
/8
white
/9
/10
/11
/12
/13
/14
/15
>>
Dresdn. Bk.
FAG
Henkel Vz.
Hochtief
Hoechst
Holzmann
ohne Gewähr
Börse
Kurse Ffm.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Infotext - Setting marks
10. Megatext
Press this key on the remote
control....
The screen displays
Explanation
MENU
AV
Ȅ new
?
next
Mark:
When the required page is displayed (in our example
subpage 422/2), press the red key again.
Card index
Help
4. Set the second mark
MARKE 2 422
12.10.93 13:08:00
böArRsD/ZeDF Dfi.rankfurt
„MARK 2“ is now displayed in green lettering in the
top left-hand corner of the screen.
/1
/2
Fortlaufende Notierungen
12.10.93
2/4
Kassa
Vortag
/3
/4
Commerzbank 325,0
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
/5
Continental
Daimler
225,6
741,5
384,5
206,5
808,4
579,0
430,5
123,5
580,0
1125,0
285,5
935,0
/6
/7
Degussa
Dt. Babcock
Dt. Bank
Douglas
red
/8
/9
/10
/11
/12
/13
/14
Dresdn. Bk.
FAG
Henkel Vz.
Hochtief
/15 Hoechst
>>
Holzmann
ohne Gewähr
Börse
Kurse Ffm.
MENU
AV
Ȅ new
?
next
Mark:
10 marks can be set as described in steps 1 - 4 in
each of the first 10 programme positions.
Card index
Help
5. Set further marks
e.g. page 110
MARKE 3 110 ARD/ZDF Do. 14.10.93 08:11:00
AKTUELLES
Nachrichten . . . . . . . . . . 112-115
Politik, Wirtschaft, Kultur
Letzte Meldung . . . . . . . . . . 111
1
1
0
Umwelt, Ratgeber, Aus aller Welt
Wetter . . . . . . . . . . . . . . . 400
Börsenkurse . . . . . . . . . . . 420
red
. . . . . . . . . . . . .
Kirche
155/156
Am Wochenende (Freitag - Sonntag):
Reise . . . . . . . . . . . . . . . 560
. . . . . . . . . . . .
Gesundheit
580
Sport
200
. . . . . . . . . .
***
***
Aktuelles
Inhalt
6. Return to TV picture
TV
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Infotext - Mark-by-mark advance
10. Megatext
Press this key on the remote
control....
The screen displays
Explanation
MENU
AV
Ȅ new
?
next
Mark:
Card index
Help
1. From TV picture to
the first mark
INFO
ķ
After the
key has been pressed, a panel with
MARKE 1 400 ARD/ZDF Di. 12.10.93 10:52:00
„Mark 1“ will be displayed.
W E T T E R
On programme positions without a mark, a white field
will be displayed with the text „No mark“.
Ü B E R S I C H T
Deutschland
INFO
Wettervorhersage . . . . . . . . . . . . 401
ķ
. . . . .
. . . . .
Früh- bzw. Mittagstemperaturen
Aussichten für die nächsten Tage
402
403
Europäisches Reisewetter
Nord- und Nordwesteuropa
Mittel- und Südosteuropa
Süd- und Südwesteuropa
404
405
406
407
. . . . . . . .
. . . . . . . . .
. . . . . . . . .
Wassertemperaturen
. . . . . . . . . . .
Temperaturen international . . . . . . . . 408
Quelle: METEO CONSULT / DWD
Wetter
Inhalt
MENU
AV
Ȅ new
?
next
Mark:
Card index
Help
2. Step forward to the
next mark
INFO
Each time the
key is pressed, you advance to
ķ
MARKE 2 422
12.10.93 13:08:00
böArRsD/ZeDF Dfi.rankfurt
the next mark. In this manner you can run through all
pages on which marks are set.
/1
/2
Fortlaufende Notierungen
12.10.93
2/4
Kassa
Vortag
/3
/4
Commerzbank 325,0
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
/5
INFO
Continental
Daimler
225,6
741,5
384,5
206,5
808,4
579,0
430,5
123,5
580,0
1125,0
285,5
935,0
ķ
/6
/7
Degussa
Dt. Babcock
Dt. Bank
Douglas
/8
/9
/10
/11
/12
/13
/14
Dresdn. Bk.
FAG
or
Henkel Vz.
Hochtief
/15 Hoechst
>>
Holzmann
green
ohne Gewähr
Börse
Kurse Ffm.
INFO
The
key will return you to the TV picture after
ķ
3. Return to TV picture
having run through all marks.
TV
Press the
key to return directly to the TV picture
without having to run through all the marks.
INFO
ķ
or
TV
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Infotext - Erasing marks
Explanation
10. Megatext
The screen displays
Press this key on the remote
control....
MENU
AV
Ȅ new
?
next
Mark:
Card index
Help
1. Call the desired page
e.g. page 422/2
INFO
Press the
key to call the page where the mark
ķ
MARKE 2 422
12.10.93 13:08:00
böArRsD/ZeDF Dfi.rankfurt
is to be erased.
/1
/2
Fortlaufende Notierungen
12.10.93
2/4
Kassa
Vortag
/3
/4
Commerzbank 325,0
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
/5
Continental
Daimler
225,6
741,5
384,5
206,5
808,4
579,0
430,5
123,5
580,0
1125,0
285,5
935,0
/6
INFO
ķ
/7
Degussa
Dt. Babcock
Dt. Bank
Douglas
/8
/9
/10
/11
/12
/13
/14
or
Dresdn. Bk.
FAG
Henkel Vz.
Hochtief
/15 Hoechst
>>
green
Holzmann
ohne Gewähr
Börse
Kurse Ffm.
MENU
AV
Ȅ new
?
next
Mark:
Erasure of the mark on the current text page changes
the sequence of the remaining marks.
Card index
Help
2. Erase the mark
422 ARD/ZDF Di. 12.10.93
börse fran1k3:0f8:u00 rt
/1
/2
Example:
Fortlaufende Notierungen
12.10.93
2/4
Kassa
Vortag
/3
3 marks have been set in the current programme position:
- Mark 1 on text page 400
/4
Commerzbank 325,0
324,7
227,5
740,5
384,0
206,0
808,0
576,0
431,5
125,0
580,0
1122,0
286,5
930,0
326,5
232,0
741,0
383,0
206,5
809,0
580,0
435,0
125,0
588,0
1140,0
291,5
962,0
red
/5
Continental
Daimler
225,6
741,5
384,5
206,5
808,4
579,0
430,5
123,5
580,0
1125,0
285,5
935,0
/6
/7
Degussa
Dt. Babcock
Dt. Bank
Douglas
/8
/9
- Mark 2 on text page 422/2
- Mark 3 on text page 503
/10
/11
/12
/13
/14
/15
>>
Dresdn. Bk.
FAG
Henkel Vz.
Hochtief
Hoechst
You now erase the mark 2 on text page 422/2.
Holzmann
ohne Gewähr
The sequence of the remaining marks is immediately
re-arranged and is now::
Börse
Kurse Ffm.
- Mark 1 on text page 400
- Mark 2 on text page 503
3. Return to TV picture
TV
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Subtitles
10. Megatext
This TV enables you to display programme subtitles automatically.
For this purpose one of the two A or B function keys must be programmed on the remote control handset. Please refer to Section „Equipment
configuration - Assigning the function keys“ for programming. The subtitles will only be displayed automatically after a function key
has been programmed accordingly.
Example: You wish to watch the news with its subtitles. Program a function key with the „Subtitle“ function.
Press this key on the remote
The screen displays
Explanation
control....
The teletext transmitted by the station is superimpo-
sed on the picture at the bottom of the screen.
1. Display of subtitles in the
current programme
The subtitle function can be activated or deactivated
with the A or B function key.
automatically
In Ballungsgebieten sind solche Bilder selten
2. Blank out the subtitles*
The subtitle function can be switched off and on again
with the correspondingly programmed function key.
A
Note: If the subtitle function is programmed for
one of the function keys, it will automati-
cally be activated when the TV set is
switched on.
or
B
* Depending on the assignment of the function keys
Riddle solutions key
10. Megatext
Megatext contains riddles with hidden answers.
Access to riddle solutions
The solutions to these riddles can be displayed with
the A* or B function key.
*
A
or
B
* Depending on the assignment of the function
keys. The factory setting is A.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Variable Zoom
11. Special picture effects
(not for Gemini)
All programmes that are not transmitted in the traditional 4:3 screen format, such as cinema films in Cinemascope or Super-Cinemascope or
16:9 format, have black bars at the top and bottom of the screen.
With the zoom function, you can increase the size of the picture and make the black bars disappear. Although this also causes part of the
picture to move off the screen at each side, the resulting loss of information is slight and less disturbing than the black bars.
Press this key on the remote
The screen displays
Explanation
control....
P
+
Press the
button until the black bars at the top
1. Switch on the zoom function
and enlarge the picture
and bottom of the screen have disappeared. The
entire picture is enlarged uniformly.
The selected enlargement factor is automatically
stored for this programme position as long as the
TV set is not switched off. Switching to another
station will restore the picture to its normal size.
If you return to the station for which you activa-
ted the zoom function, the picture will be auto-
matically enlarged if the same programme is still
running.
IJ
P
+
Zoom IJ
If you wish to use the selected enlargement also
2. Call the zoom function for the
current programme position
for other programmes, press the
key again
IJ
after setting the zoom factor with the
P
key.
+
This returns the picture to its normal size, but
stores the current enlargement factor for subse-
quent use.
IJ
Zoom
IJ
If the TV set has been switched off with the
remote control or the main switch, the stored
enlargement factor can be recalled by pressing
3. Switch off the zoom function
the
key twice.
IJ
2x
IJ
Zoom IJ
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame freeze
11. Special picture effects
Press this key on the remote
control....
The screen displays
Explanation
When you press this key, the current frame is
„frozen“ on the screen. The TV programme (or
the video film) continues to run in the backgro-
und.
1. Activating frame freeze
Pressing the key again switches back to the cur-
rent programme (or video film).
2. Deactivating frame freeze
11. Special picture effects
Picture format
The „picture format“ function is used primarily for displaying the picture format of external devices (such as a 16:9 video recorder) in the
correct proportions.
It can, however, also be used to make the picture of a 4:3 programme wider. This function can be stored on one of the function keys.
Press this key on the remote
The screen displays
Explanation
control ...
Press the function key you have programmed for
this function.
1. Call the „picture format“
function
R
T
L
The width of the picture is increased proportio-
nally to fill the entire width of the screen.
*
*
A
B
R
T
L
*) depending on the function key
assignments
42
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Special picture effects (only Gemini)
4:3 / 16:9
All programmes that are not transmitted in the traditional 4:3 format, such as cinema films in Cinemascope or Super-Cinemascope or 16:9
format, have black bars at the top and bottom of the screen.
With the 4:3 / 16:9 function, you can increase the size of the picture and make the black bars disappear.
Press this key on the remote
The screen displays
Explanation
control....
1. Call the 16:9 function
R
T
L
R
T
L
2 x
IJ
16:9
Zoom
11. Special picture effects (only Gemini)
All programmes transmitted in 4:3 format are displayed on the screen with black stripes on the left and right. Cinemascope, 16:9 films
and other wide-screen formats are displayed with black stripes at the top and bottom.
The zoom function permits you to increase the picture size, thus moving the black stripes off the visible part of the screen.
Press this key on the remote
The screen displays
Explanation
control....
You can magnify the picture uniformly in five
steps by pressing the . The size of the magni-
fied picture can be reduced again by pressing
the - key.
1. Call the zoom function and
magnify the picture
L
RT
3 x
IJ
-
-
Zoom
R
T
L
You can move the magnified picture upwards by
2. Move the zoomed picture up
and down
P
+
pressing the
key or downwards by pressing
P
-
the
key.
These modified picture settings are automatical-
ly stored for this programme position as long as
the TV set is not switched off.
IJ
If you return to the station for which you activa-
ted the zoom function, the picture will be auto-
matically enlarged if the same programme is still
running.
-
P
-
Zoom
P
+
43
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Supplement to Equipment Configuration
Grey value of side bars
(only Gemini)
Grey value of side bars: When "normal" 4:3 format programmes are being received, grey bars appear at the left and right sides of the
screen. The tonal value of these side bars can be adjusted in steps from 0 to 6, where 0 is black and 6 is light grey.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
The grey value of the side bars on the screen
1. Ajustar el valor gris del
margen
(during reception of a programme in 4:3 format)
-
can be adjusted with the
keys.
Equipm. configuration
MENU
This setting applies to all programme positions.
blue
Prog. change settings
1
2
5
8
0
3
6
9
4
7
3 x
red
yellow
yes
RGB priority:
--/-
P
+
-
-
OK
white
red
yes
Sound settings:
P
-
TV
MENU
?
A
B
AV
OK
TV
REC
Ȅ
3
Side bar value:
store ?
OK
6 9 8 - 0 5 S - G B
12. Operation without remote control
This mode is only intended for an emergency when the battery in
the remote control handset is flat, or if the remote control is not
available.
Programme selection:
Press the - P + keys.
Volume:
The TV controls are underneath a cover at the front of the set.
Hold down the preselect key until the bar display for the volume
appears on the screen. Now press the - P + keys to adjust the
volume.
You can control the following functions on the TV without the
remote control handset. The preselection of the function is valid
for 10 seconds, only 5 of which are shown in the permanent dis-
play.
Contrast:
Hold down the preselect key until the bar display for contrast
appears on the screen. Then press the - P + keys to adjust the
contrast.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Camcorders
Videorecorders
13. Connecting peripheral equipment
Video recorders can be connected to the TV set via the antenna socket or a EURO socket.
We recommend connection via a EURO (Scart) socket, since only such sockets have separate inputs and outputs for the picture
and sound signals.
Camcorders can be connected to the TV set with special cables (available from your dealer).
The following connection diagram applies in principle to all of our products, although the various sockets may be located in different positions
on different units.
TV set (rear view)
Euro 1
Euro 1 for S-VHS
Euro 2
Euro 3 for VHS
Phono-Scart cable for VHS-Scart or S-VHS-Scart connection
e.g. hama Item No. 42387 or hama Item No. 42394
Euro or Scart cable
Video recorder (rear view)
Camcorder (video camera)
Metz-cable 087928010
only for copying S-VHS/Hi-8 films from EURO 2 to AV 3
In (phono input)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external
devices
13. Equipment configuration
In the menu „Device connection“, you can define which AV devices are connected to the various sockets on the TV set. The box „Devices“
contains a list of common AV devices. Only certain devices can be connected to the FRONT sockets.
Wherever possible, the AV devices should be connected to specific EURO sockets, namely:
EURO 1: VHS or S-VHS video recorder + Pay-TV decoder, video recorder with data transfer to/from TV set, PC, games console ( e.g.
Nintendo), laser disk, photo CD, SAT receiver, Pay-TV decoder, SAT/Set Top unit, S-VHS playback unit.
EURO 2: S-VHS/Hi8 video recorder, S-VHS/Hi8 video recorder + Pay-TV decoder, VHS video recorder, SAT receiver.
EURO 3: VHS video recorder, VHS video recorder + Pay-TV decoder, games console (e.g. Nintendo), laser disk, photo CD, SAT receiver, Pay-TV decoder.
The connections are pre-programmed in the factory as shown in the picture for step 2.
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
In the „Device connection“ menu, you can assign one
of the defined AV devices to each of the EURO sockets.
The abbreviations in the box on the right have the
following meanings:
Video rec. = video recorder (up to 3 may be connected).
Video rec. 1 is the video recorder which is always
connected; Video rec. 2 and 3 are used for copying
from one recorder to another.
VTR+Dec. = video recorder and Pay-TV decoder (e.g.
Premiere), where the decoder is connected only to the
video recorder.
1. Call the „Device
connection“ menu
L
M
Devices
no device
Device connection
blue
EURO1: Video
Video Rec. 2
Video Rec. 1
Video Rec. 2
Video Rec. 3
VTR+DEC(1)
VTR+DEC(2)
VTR+DEC(3)
Camcorder
Mixer
1
2
5
8
0
3
6
9
4
7
MENU
yellow
EURO2: Video
Video Rec. 1
--/-
P
+
-
OK
white EURO3: Video
Camcorder
P
-
red
TV
PC
MENU
Decoder A
Decoder B
Laser Disk
Photo CD
SAT/SetTop
Games
?
A
B
yellow
AV
REC
Ȅ
red
Camcorder = video camera
Signal type
selection
Decoder = Pay-TV decoder (e-g- Premiere)
SAT = external satellite receiver
Game = games console
6 9 8 - 0 5 Q - G B
MENU
The default settings can be modified to meet your own
requirements. You should, however, note the following
input and output signal allocations when doing this.
TV
?
return
picture
Help
2. Change the device
connections
L
M
Devices
Device connection
no device
Video Rec. 1
Video Rec. 2
Video Rec. 3
VTR+DEC(1)
VTR+DEC(2)
VTR+DEC(3)
Camcorder
Mixer
blue
EURO1: Video
S-VHS / Hi8
(= Y/C =S-Video)
VHS
(= Video)
1
2
5
8
0
3
6
9
RGB
Video Rec. 2
blue
yellow
white
4
7
yellow
EURO2: Video
Video Rec. 1
--/-
Input
Yes
Yes
No
Output
No
Input
Output
Yes
Input
Yes
No
P
+
-
OK
white EURO3: Video
Camcorder
Yes
Yes
Yes
EURO 1
EURO 2
EURO 3
P
-
TV
PC
Yes
No
Yes
MENU
Decoder A
Decoder B
Laser Disk
Photo CD
SAT/SetTop
Games
?
A
B
Yes
Yes
AV
REC
Ȅ
red
Signal type
selection
To change the settings, select the appropriate EURO
socket with the coloured keys and then select the
device to be connected with the
6 9 8 - 0 5 Q - G B
P
-
P
+
P
-
P
+
and
keys.
MENU
TV
?
return
picture
Help
When the devices are selected, the signal type is
always set to „video“. Pressing the red key displays a
box for selection of the signal type.
3. Change the signal type
L
M
Sign. type
Video Rec. 2
controls AV
operation
Device connection
blue
EURO1: Video
Video Rec. 2
Differences between the signal types:
1
2
5
8
0
3
6
9
4
7
• continuous AV operation: the screen displays the
picture provided by the AV device. The channel setting
of the TV set has no effect.
red
yellow
white
Video
RGB
EURO2: Video
Video Rec. 1
--/-
P
+
-
OK
EURO3: Video
Camcorder
YC in
P
-
TV
continuous
• . . . controls AV operation: if the AV device is set to
„play“, the screen displays the picture provided by the
AV device; if the AV device is set to „stop“, the screen
displays the picture of the selected TV programme
position.
MENU
P
-
AV operation
?
P
+
A
B
AV
Video
RGB
REC
Ȅ
red
Signal type
selection
YC in
6 9 8 - 0 5 R - G B
4. Store the settings and
return to TV picture
TV picture
OK
TV
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Video recorder
13. Connecting peripheral equipment
A video recorder can be connected to the TV set via the aerial socket or via one of the EURO sockets.
We recommend connecting the video recorder via a EURO (Scart) socket, since only these sockets have separate inputs and out-
puts for the video and audio signals.
A VHS video recorder can be connected to any of the three EURO sockets. An S-VHS/Hi8 video recorder must be connected to the EURO
socket 2 if you wish to take advantage of the full picture quality provided by such a recorder (see the table on page 44). A second
S-VHS/Hi8 video recorder can be connected to EURO socket 1 to play back films recorded on the S-VHS/Hi8 video recorder connected to
the EURO socket 2.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Video recorders
Video signal
13. Connecting peripheral equipment
In the following example, video recorder 2 is to be connected to the EURO 1 socket.
ꢀ
Video recorder 1 is programmed in the factory on programme position 0. For this reason, connect the video recorder via a EURO cable to
the EURO 2 socket, insert a recorded cassette, press the ı key and select programme position 0 on the TV set.
Example: Connect Video recorder 2 to the EURO 1 socket, as shown on page 43.
Press this key on the remote
The screen displays
control....
Explanation
MENU
TV
?
return
picture
Help
Select any desired programme position (in this
example: position 25).
1.Select any desired program-
me position and call the
station table
Station table
Channel
Signal
Prog.
LM
Logo
20
21
22
23
24
25
26
27
28
29
PRO7
RTL2
VOX
41
24
29
52
28
46
12
42
53
61
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
1
4
7
2
5
3
6
9
DSF
EUSPO
PREMI
DISCO
MTV
MDR
CNN
8
red
>> further settings
Std., Pict., Sound
0
6 9 8 - 1 1 A - G B
white
MENU
TV
?
return
picture
Help
The video signal is normally supplied directly by the
aerial.
2. Call the submenu
„Video signal“
Station table
Prog.
LM
Logo
Channel
Signal
20
21
22
23
24
PRO7
RTL2
VOX
41
24
29
52
28
Aerial
Aerial
Aerial
Aerial
Aerial
white
DSF
EUSPO
blue
Aerial
PREMI
yellow
EURO1: Video Rec. 2
white
EURO2: Video Rec. 1
green
EURO3: Decoder A
Std., Pict., Sound
6 9 8 - 1 1 B - G B
MENU
TV
?
return
picture
Help
In order to display the picture from the video cassette
on the screen, the video signal must be set to
„EURO1“.
3. Select the video signal
EURO 1: „LogicVTR+D“
Station table
Prog.
LM
Logo
Channel
Signal
20
21
22
23
24
PRO7
41
24
29
52
28
Aerial
Aerial
RTL2
VOX
Aerial
DSF
Aerial
yellow
EUSPO
Aerial
blue
Aerial direct
yellow
EURO1: Video Rec. 2
EURO2: Video Rec. 1
white
green
EURO3: Decoder A
Std., Pict., Sound
6 9 8 - 1 1 C - G B
4. Store the setting and return
to the TV picture
OK
TV
TV picture
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Video recorders
13. Connecting peripheral equipment
Connecting a video recorder via the aerial socket
• Connect the aerial output (RF-out) of the video recorder to the aerial socket of your TV by means of the aerial cable.
• Load a recorded video cassette in the video recorder.
• Start playback or switch on the test pattern of the video recorder. The test pattern of most video recorders is located within the standard
channels Ch 30 to Ch 40 (see operating instructions of the video recorder).
• Execute a station search, beginning with standard channel 25. See Section 3. Presetting TV stations, station search.
• If the playback picture or the test pattern of the video recorder is displayed on the screen, then this channel can be stored. See Section
3. Presetting TV stations.
• In order to ensure optimum picture quality at all times, select the option „VCR On“. To do so, proceed as described below.
Press this key on the remote
The screen displays
Explanation
control....
The picture quality of a video film can be impro-
ved in a terrestrial programme position with a
standard channel.
MENU
TV
?
1. Select the station table and
call the picture submenu
return
picture
Help
Station table
Programme
LM
Std
Pict. Sound
The video signal for this programme position
must be set to „Aerial“.
0
EURO1
ARD
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
1
2
3
4
5
6
7
8
9
red
ZDF
SAT 1
yellow
Sharpness
Noise reduction
CTI
Comb filter
further
1
A2
On
yellow
blue
white
green
red
store ?
Logo, Channe
6 9 8 - 1 1 D - G B
OK
MENU
TV
?
To ensure optimum picture quality the „VCR“
function must be switched on.
return
picture
Help
2. Call the second picture sub-
menu and adjust VCR
Station table
-
Set the „VCR“ function to „On“ with the
keys and press the
Programme
LM
Std
Pict. Sound
red
OK
key to store the setting in
the programme position.
0
1
2
3
4
5
6
7
8
9
EURO1
ARD
Auto.
Auto.
Auto.
Auto.
—
—
—
—
—
—
—
—
green
ZDF
TV
Press the
key to return to the TV picture.
SAT 1
blue
0
0
0
4:3
On
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
-
yellow
white
green
red
OK
Logo, Channel, Sisgntaol re ?
6 9 8 - 1 1 E - G B
OK
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Pay-TV decoder
13. Connecting peripheral equipment
This Pay-TV decoder decodes the scrambled signals of a Pay-TV station (e.g. Premiere) so that they can be displayed on the screen of the
TV set. For connection of a Pay-TV decoder, you need a EURO (=Scart) cable in which all 21 pins are assigned.
If you want to record Pay-TV programmes with a video recorder, we recommend that you connect the Pay-TV decoder directly to the video
recorder. If this is not possible, the Pay-TV decoder can be connected to the EURO 1 or EURO 3 socket (see also „Connecting external
devices“ on page 44).
The following diagram shows the connection of a Premiere decoder Typ G2.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Pay-TV decoder
13. Connecting peripheral equipment
For the following explanation it is assumed that the Pay-TV decoder A (Premiere) is connected to the EURO 3 socket.
The following settings must be made on the TV set:
Press this key on the remote
The screen displays
Explanation
control....
MENU
TV
?
return
picture
Help
1. Select the Pay-TV program-
me position and call the
station table
Station table
Channel
Signal
Prog.
LM
Logo
20
21
22
23
24
25
26
27
28
29
PRO7
RTL2
VOX
41
24
29
52
28
46
12
42
53
61
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
Aerial
DSF
EUSPO
PREMI
DISCO
MTV
MDR
CNN
red
>> further settings
Std., Pict., Sound
6 9 8 - 1 1 A - G B
MENU
TV
?
return
picture
Help
The video signal is normally supplied directly from the
aerial.
2. Call the submenu „Signal“
Station table
Prog.
LM
Logo
Channel
Signal
20
21
22
23
24
PRO7
RTL2
VOX
41
24
29
52
28
Aerial
Aerial
Aerial
Aerial
Aerial
white
DSF
EUSPO
blue
Aerial
PREMI
yellow
EURO1: Video Rec. 2
white
EURO2: Video Rec. 1
green
EURO3: Decoder A
Std., Pict., Sound
6 9 8 - 1 1 B - G B
MENU
TV
?
return
picture
Help
A Pay-TV signal must always be unscrambled in a
decoder before it can be displayed on the screen.
3. Select video signal „via
decoder“
Station table
You can switch between „Aerial direct“ and „Aerial via
Prog.
LM
Logo
Channel
Signal
-
decoder“ with the aid of the
keys.
20
21
22
23
24
PRO7
41
24
29
52
28
Aerial
Aerial
Aerial
Aerial
Aerial
RTL2
VOX
DSF
-
EUSPO
blue
Aerial via Decoder A
yellow
EURO1: Video Rec. 2
EURO2: Video Rec. 1
white
green
EURO3: Decoder A
store?
OK
Std., Pict., Sou
6 9 8 - 1 1 F - G B
Note:
4. Store the setting and return
to TV picture
You can call the Premiere Info-Service only if the
RBG priority is set to „Yes“ in the menu „Equip-
ment configuration“. See Section 5. Equipment
configuration, RGB priority.
TV
OK
51
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Technical data
14.1 Upgrade kits
Mains voltage: 230 V ac, 50/60 Hz
• Multi-standard upgrade kit 031 NB 1038
For reception of „Standard M“ and „Standard L“ stations.
Power consumption:
• NICAM upgrade kit 041 NB 1048
Music power output to DIN 45324
Power consumption
(to CENELEC/TC 59 X):
at 4 Ohms and 1 kHz
(sine output)
• SAT upgrade kit 081 NB 1010
For satellite reception without an additional receiver.
2 x 12 W
(2 x 8 W)
Hawaii
Linea
Elba
ca. 106 W
ca. 125 W
ca. 105 W
ca. 130 W
ca. 106 W
• SAT upgrade kit 082 NB 1014
SAT receiver to replace the terrestrial receiver.
2 x 12 W
(2 x 8 W)
• SAT upgrade kit 083 NB 1018
A SAT receiver. Can also receive uncoded ADR (Astra Digital
Radio) transmissions.
2 x 12 W
(2 x 8 W)
• MVS - Video recorder control 013 ZC 1048
For transfer of programmed TV timer data to video recorder.
2 x 12 W (2 x 8 W)
1 x 24 W
Gemini
Morea
Contact your dealer for further upgrade kits.
2 x 12 W
(2 x 8 W)
Consumption of energy per hour:
Elba
105 Wh
106 Wh
125 Wh
130 Wh
106 Wh
Hawai
Linea
Gemini
Morea
Standby (all sets):
ca. 2.8 W
Aerial input:
Channel coverage:
75 Ohms, asymmetric DIN 45325
Standard channels 2...12, 21...69
Special channels S1...S20, S21...S41
S42...S46 (Belgian OIR channels)
14.2 Maintenance and care
Guarantee
Repairs
When you purchase the television, ensure that your dealer inclu-
des the completed TV „passport“. It must specify the date, the
dealer’s stamp and signature. Keep this document in a safe place,
together with the invoice. Any claims under the warranty will only
be accepted if these documents are submitted. Keep your TV
clean and handle it with care.
The TV should only be opened and repaired by quali-
fied service personnel!
CAUTION! DANGER!
Consult your dealer when repairs are necessary.
Cleaning the set
Any unauthorized attempts to open or repair the TV may result in
the guarantee becoming null and void.
Always switch off the TV with the ON/OFF key before
you clean it!
Adequate shielding is provided against X-ray radiation (see
approval certificate on the rear panel of the TV).
Use a soft, dry or slightly moist cloth to clean the cabinet. Do not
use any strong detergents as they may damage the finish and
labels. Use a damp chamois leather to clean the screen.
Changing the high voltage or fitting a different type of picture tube
may cause an increased amount of X-ray radiation. Televisions
modified in such a manner are no longer in keeping with this
approval certificate and must not be used!
52
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Glossary
2-channel sound transmission:
• Sound effects
Spatial sound or stereo wide can be activated or deactivated.
• Muting - 12 dB
Separate reproduction of 2 sound channels, e.g. 2 different lan-
guages.
Audio
The sound can be muted by 12 dB.
Latin for „I hear“ - The sound frequency range audible to the
human ear is between 60 to 20,000 Hz approx.
Function keys - Teletext
• No function
Camcorder
No function has been assigned to this key.
• Riddle solutions
Display of the hidden answers to riddles
A video camera with integrated video recorder.
Cinch (phono)
Single-pole plug connector for separate audio and/or video
copying.
• Large font
Doubles the font size in teletext.
• Stop page
Running through multiple pages consisting of more than 15
subpages is automatic. This can be stopped at any page with
the „Stop page“ key so that „leafing“ can be continued
manually.
Decoder
An electronic circuit that decodes TV signals; required to receive
coded TV transmissions, such as Premiere.
Dual-Band LNC
An LNC that can simultaneously process two transponder fre-
quency ranges (11 GHz and 12 Ghz)
Noise reduction
EURO socket assignments:
Can be switched on to enhance the picture quality.
S-VHS / Hi8
(= Y/C =S-Video)
VHS
(= Video)
RGB
OSD (On Screen Display)
Convenient display of all functions to adjust the television. They
are superimposed on the current programme.
Input
Yes
Yes
No
Output
No
Input
Output
Yes
Input
Yes
No
Yes
Yes
Yes
EURO 1
EURO 2
EURO 3
Phono (cinch)
Yes
No
Yes
Yes
Yes
Single-pole plug connector for separate audio and/or video
copying.
RGB control
FBAS = CVBS
R = red, G = green, B = blue. Indicates separate colour signal
processing.
C = composite, V = video, B = blanking, S = signal
Spatial sound
Function keys - Television:
Mono transmissions can be reproduced with an artificial stereo effect.
• No function
No function has been assigned to this key.
Standard channels
• Subtitles
02-12 and 21-69 can be received by way of the aerial and cable
system.
Displays the subtitle with corresponding transmissions.
• Large subtitles
50% enlarged subtitles are displayed with corresponding pro-
grammes.
Standby mode
The TV has been switched off with the remote control, or it has
switched itself off.
• Logo
The display of the station logo is meaningful only if a PIP upg-
rade kit has been installed.
Stereo wide
For stereo broadcasts, the distance between the speakers can
be increased artifically to achieve a wider stereo effect.
• Picture format (variable zoom)
Changes from 4:3 to 16:9 in the presence of a switching voltage.
Timer
• Zoom 2:1
Used to program automatic recording, or to switch a video recor-
der or TV automatically on and off at a preset time.
The picture can be zoomed to double its size and then back
again to 1:1
53
Download from Www.Somanuals.com. All Manuals Search And Download.
16. Remote control handset for video recorders
The remote controls RB11 are capable of controlling the basic functions of the current series of Metz video recorders. Remember to point
the remote control at the video recorder !
In order to permit control of a video recorder, function key B for the TV level must be programmed to „VTR operation“ in
the menu „Equipment configuration/Assigning the function keys“ on the TV set.
Whenever a key is pressed, an indicator on the remote control unit blinks.
RB 11
100 Hz
VTR
• Video recorder On/OFF
• Programme position selection
• Next programme
1
4
7
2
5
8
0
3
6
9
• Video recorder timer ON/OFF
•
REW (rewind)
From STOP: fast rewind
From PLAY: picture search reverse
-/--
TIMER
•
FF (fast forward)
From STOP: fast forward
From PLAY: picture search forward
P
+
ľľ
ıı
-
OK
•
•
AV link: switches the TV set between
TV and video rec. modes
• Stop
P
-
• Next programme
ı
TV
Terminates playback or recording
•
Play - Start playback
MENU
ı
•
•
Slow-motion playback
• Still - Pause
ľľ
ıı
?
Operator help for video rec. operation
•
•
Index - Video index search forward
A
B
• Index - Video index search reverse
AV
Switch to AV mode AV 1, AV 2, ...
REC - Start recording
.
REC
Ȅ
ɚ
•
To switch the remote control to video
recorder mode:
•
Press and hold this key and press
the desired function key.
INFO
ķ
In order to permit control of a video
recorder, function key B for the TV level
must be programmed to „VTR operation“
in the menu „Equipment configu-
ration/Assigning the function keys“
on the TV set.
PRG.
ɮ
IJ
54
Download from Www.Somanuals.com. All Manuals Search And Download.
17. Index
Moving stations . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Access to riddle solution . . . . . . . . . . . . . . . . . . .40
Aerial connection . . . . . . . . . . . . . . . . . . . . . . . . . .4
Allocating a station logo . . . . . . . . . . . . . . . . . . . .12
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Audio standard values . . . . . . . . . . . . . . . . . . . . .14
Autostore function . . . . . . . . . . . . . . . . . . . . . . . . .9
AV equipment, connecting . . . . . . . . . . . . . . . . . 45
AV recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Multiple pages . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Noise reduction . . . . . . . . . . . . . . . . . . . . . . .20, 53
Operator help . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Page selection by cursor . . . . . . . . . . . . . . . . . . .33
Peripheral equipment . . . . . . . . . . . . . . . . . . .44, 45
Picture format . . . . . . . . . . . . . . . . . . . . . . . . .21, 53
Picture settings . . . . . . . . . . . . . . . . . . . . . . . .13, 22
Picture sharpness . . . . . . . . . . . . . . . . . . . . .13, 20
Premiere decoder . . . . . . . . . . . . . . . . . . . . . .49, 50
Presetting stations . . . . . . . . . . . . . . . . . . . . . . . . .8
Programme selection . . . . . . . . . . . . . . . . . . . . . . .7
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
Bass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
Brightness, luminance . . . . . . . . . . . . . . . . . .13, 14
Channel entry . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Childlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Chrominance, colour intensity . . . . . . . . . . . .13, 14
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Connecting peripheral equipment . . . . . . . . .44, 45
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Copying (programme positions) . . . . . . . . . . . . . .10
CTI function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
CVBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Reminder time . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
RGB priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Riddle solutions key . . . . . . . . . . . . . . . . . . . . . . .40
Setting marks . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Sorting stations . . . . . . . . . . . . . . . . . . . . . . . . . .10
Sound channels1/2 . . . . . . . . . . . . . . . . . . . . . . .29
Sound effects . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Sound mute . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 13
Spatial sound . . . . . . . . . . . . . . . . . . . . . . . . .17, 53
Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Station closedown . . . . . . . . . . . . . . . . . . . . . . . . .5
Station search . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Stereo wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Stop page . . . . . . . . . . . . . . . . . . . . . . . . . . . .32, 53
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Switch ON/OFF time . . . . . . . . . . . . . . . . . . . . . .25
Direct page selection . . . . . . . . . . . . . . . . . . . . . .33
Double font size . . . . . . . . . . . . . . . . . . . . . . . . . .35
Entering the time manually . . . . . . . . . . . . . . . . .24
Equipment configuration . . . . . . . . . . . . . . . . . . .15
Erasing marks . . . . . . . . . . . . . . . . . . . . . . . . . . .39
FBAS (CVBS) . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Forced mono . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Frame freeze . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Function keys . . . . . . . . . . . . . . . . . . . . . . . . .15, 53
Thunderstorms . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
TV menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5, 6
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Infotext . . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 36-39
Variable zoom . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Video recorder, connecting . . . . . . . . . . . . . . .44-48
Video signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Video standard values . . . . . . . . . . . . . . . . . . . . .13
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 14
Volume adjustment . . . . . . . . . . . . . . . . . . . . . . .18
Language selection . . . . . . . . . . . . . . . . . . . . . . . .5
Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Mains connection . . . . . . . . . . . . . . . . . . . . . . . . . .4
Mark-by-mark advance . . . . . . . . . . . . . . . . . . . .38
Megatext (Teletext) . . . . . . . . . . . . . . . . . . . . . . .30
Subject to technical changes. Errors and omissions excepted.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Quality – A matter of principle.
With the trend-setting Metz technology you will allways
make the correct choice. See your Metz dealer.
He will be happy to demonstrate the current Metz range.
Televisions sets
Video recorders
mecablitz electronic
flashguns
Metz-Werke GmbH & Co KG
Postfach 1267, D-90506 Zirndorf
Internet: http://www.metz.de
E-Mail: [email protected]
Tel.: (0911) 9706-0
Fax: (0911) 9706-340
Availability and technical
details subject to change
without notice
DVD players
Printed in Germany
698 47 2018.A3
ķ
Always first class!
Download from Www.Somanuals.com. All Manuals Search And Download.
|