COLOUR TELEVISIONS
IDTV
28C723IDW
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features of your integrated digital television
This television can receive and process all analogue and all digital
stations. This television set has an integrated digital and analogue receiver.
The digital receiver unit converts the signals from digital stations to provide
outstanding audio and picture quality.
The TV guide (only for digital stations) tells you of any schedule changes at short
notice, and provides an overview of all the stations’ schedules for the next few days.
If the broadcaster provides it, you can call up detailed information on each programme
at the touch of a button.
This television has a very comprehensive, user-friendly menu system.
Receiving digital stations
2
You need a digital outdoor or indoor aerial (passive or active indoor aerial with
its own power supply) to receive digital stations.
Unlike analogue broadcasting, not every station has its own transmission frequency.
Instead, several stations are grouped into what are known as bouquets on a regional or
national level.
You can find the current transmission information on teletext from various broadcasters,
or look in a TV guide or on the Internet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety is Important
Your safety and the safety of others is important. Please, therefore, ensure you read
the Safety
instructions before you operate this television.
Safety instructions
Read all the safety instructions before first use of your TV.
!
• Position the television so that direct light does not fall on
the screen. Excessive light will cause a washed out effect.
•
Position the power supply lead and other leads so that
they are not likely to be walked on or pinched by things
placed on or against them.
3
•
Do not use the appliance in humid or damp conditions.
Do not allow the appliance to get wet, i.e. dripping or
splashing, as this may be dangerous. Do not place water
filled objects, such as vases and flower pots on top of the
appliance.
•
Make sure that no naked flame sources, such as lighted
candles, are placed on top of the appliance.
• Do not place the television near heat sources such as
radiators, ovens, stoves, etc.
• Do not use the television near any apparatus that produces
a magnetic field such as HI-FI speakers or electric motors
otherwise colourpurity may be affected.
• The heat built up in the set escapes through ventilation
holes, so do not cover the set by drapes, clothes etc. that may
block air circulation. Do not place the television on carpet
or soft furnishings.
• NEVER let children push anything into the holes or slots
on the case.
• Clean the TV Screen using a slightly damp cloth or chamois
leather. Never use abrasive cleaning agents like liquid or
aerosol cleaners.
• Remove the mains plug from the socket outlet while cleaning.
• If you wish to place the television on a shelf or in a wall
unit always ensure there is a minimum air gap of 8 cm
around the top, sides and rear of the television, to assist
ventilation.
• Your TV set is designed to operate with mains voltages
230VAC; 50Hz. Do not connect your TV set to power sources
other than the mains supply.
• To fully disconnect the TV, the mains plug is used as a
disconnecting device and therefore shall be readily accesible.
Download from Www.Somanuals.com. All Manuals Search And Download.
Television
Thank you for buying this television which is designed to give you many years of
satisfactory service.
You may already be familiar with using a television but do please take time to read these
instructions. They are designed to familiarise you with the unit’s many new features and
to ensure you get the very best out of your purchase.
Special features
• Automatic tuning system with country selection
• 899 Digital, 100 Analog programme memory
• Available for cable channels (A decoder maybe required)
• Manual fine tuning for analogue channels
• S-Video connection (Model dependant)
• Audio/Video PHONO sockets (Model dependant)
• Back audio out (Model dependant)
• CI slot (Model dependant)
4
• Component input via PHONO (Model dependant)
• Component input via scart (Model dependant)
• SPDIF coaxial output (Model dependant)
• Stereo headphone socket (Model dependant)
• 2 Scart Socket: Video cassette recorder, satellite receiver, video disc player,DVD, TV
games or a home computer can be connected to this AV socket with an appropriate
connecting cable.
• Third scart socket (Model dependant)
• Stereo sound system (Nicam) (Model dependant)
• Spatial sound effect
• Equalizer sound setup
• Automatic Volume Leveling
• Virtual Dolby Surround (Model dependant)
• Subwoofer (Model dependant)
• Picture adjustment using one button (Smart control)
• Sound adjustment using one button (Smart control)
• User friendly on screen display system
• Infrared remote control
• Multilanguage menu system
• On timer
• Off timer
• Child lock-Adult lock
• Return to the last channel viewed (SWAP)
• Alarm timer (Model dependant)
• 4:3, 16:9, Zoom, Letterbox, Subtitle, Panaroma (optional), picture formats ( for Widescreen
TV sets)
• Naming the channels
• Teletext reception
• Digital teletext
• Auto recognition of the broadcasting format (4:3, 16-9 or Letterbox) via WSS feature
• Digital Colour Transition Improvement (DCTI).
• Digital Comb Filter (DCF)
• Digital Luminance Transition Improvement (DLTI)
• Dynamic Digital Video Adaption (Model dependant)
• TILT function (Model dependant)
• MHEG-5
• Favorite channel listing
• DVB subtitling
• OAD (Over air download)
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connections
1.SECTION: INSTALLATION AND
PRECAUTIONS
IMPORTANT
The wires in this mains lead are coloured
in accordance with the following code:
Blue - Neutral
ELECTRICAL CONNECTIONS
For your own safety read the following
instructions carefully before attempting
to connect this unit to the mains supply.
For your convenience a mains plug with a
fuse has been fitted to this appliance. For
your safety please observe the following
information.
The moulded plug on this appliance
incorporates a 5Afuse. Should the fuse need
to be replaced an ASTA approved BS 1362
fuse of the same rating must be used. Do
not forget to refit the fuse cover. In the event
of losing the fuse cover the plug must not
be used until a replacement fuse cover
which must be the same colour as that visible
on the pin face of the plug has been fitted.
Fuse covers are available from any good
electrical store.
Brown - Live
As the colours in the mains lead may
not correspond with the coloured markings
identifying the terminals in your plug
proceed as follows:
The wire coloured BLUE must be connected
to the terminal marked with the letter N or
coloured
BLACK.
5
The wire coloured BROWN must be
connected to the terminal marked with the
letter L or coloured
RED.
Do not make any connection to the
terminal marked E or
GREEN,
GREEN /YELLOW.
The television receiver must be protected by
a 5A fuse if a fused plug is fitted.
For any other plug fit a 5A fuse at the
distribution board.
OR COLOURED
If the fitted moulded plug is not suitable
for your socket, then the plug should be cut
off and an appropriate plug fitted.
IMPORTANT! FITTING A
DIFFERENT PLUG.
If the mains plug is cut off from the mains
cable rewire the replacement plug in
accordance with these instructions.
5 A fuse
Caution: - Under no circumstances should the discarded plug be inserted into a mains socket.
To prevent shock hazard carefully dispose of the discarded plug into your dustbin, do not leave
the plug lying around where children might see it.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION/PREPARATION
In the box
Inside this package you should have:
Television,Remote control,User guide, AAA batteries x 2
Read these instructions before use.
Connecting the aerial and the mains cable
Plug the cable of the outdoor or indoor aerial
(passive or active indoor aerial with its own power
supply) into the aerial socket » « of the television set.
Please note:
When connecting an indoor aerial, you may have
to try it out at different positions until you get the best
reception.
6
Connect the TV mains plug into your domestic mains socket
outlet. (230V 50Hz A.C.)
Please note:
Only plug the TV into the mains socket after you have
connected the external equipment and the aerial.
Inserting batteries into the remote control
Open the battery compartment by removing the lid.
Insert the batteries (Mignon type, for example UM-3 or AAA, 2x1,5V).
Observe the polarity (marked on the base of the battery compartment).
Close the battery compartment.
Note:
If the television no longer reacts properly to
remote control commands, the batteries may
be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage
resulting from used batteries.
-
+
+
-
Environmental note
Batteries, including those which contain no heavy metal, may not be disposed of with
household waste. Please dispose of used batteries in an environmentally sound manner.
Find out about the legal regulations which apply in your area.
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Unit
Front Panel
Program Down/Up button
Volume Down/Up button.
P-
P+
V-
V+
7
General
ON/OFF switch
Stand by (Model dependant)
Stand by indicator
External Connections: (Front or side) (External connections: (Rear)
AV1 scart
R
Right audio PHONO (Red)
AUDIO
AV2 scart
L
MONO
Left audio PHONO/Mono PHONO (White)
Video PHONO (Yellow)
AV3 scart (Model dependant)
COAX
VIDEO
Coaxial output (Model dependant)
S-Video connection
Headphone socket
S-VIDEO
CI slot (Model dependant)
This common interface (C.I) slot
works with an external module,
and for use with top up TV
conditional access moduele and
smart card.
(Model Dependant)
SUBWOOFER
You may wish to connect
an audio amplifier or any
R
similar devices to audio
out. The output is always
AUDIO
OUT
Aerial socket
L
the current channel you
are watching.
It is used for external
subwoofer in 33” televisions
Please note
• See the external connections table on next page for available connections depending the
size and model of your TV set.
• Do not use Video PHONO and S-Video connections at the same time, otherwise they will
effect the picture each other.
Download from Www.Somanuals.com. All Manuals Search And Download.
External connections table
Picture tube
size/type
28”
16:9
29”
4:3
AV1 Scart
STD.
STD.
X
STD.
STD.
X
AV2 Scart
AV3 Scart
Headphone
socket
X
X
Audio/Video
PHONO
X
X
X
X
S-Video
socket
Back Audio
Out
X
X
X
X
X
X
8
Coaxial
Out
CI
Slot
STD : Standard
X
: Model Dependant
Please note:
The Audio/Video PHONO, S-Video and Headphone socket can be placed on the front panel or on
the right-hand side of the cabinet depending to the model of your TV.
Remote control
Calls up the TV guide
Mute
Stand-by
Numeric
Info
AV
Exit
Back
Favorites list
Menu
Move the cursor up
OK
Move cursor to the right
Move the cursor down
Volume up
Volume down
Move cursor to the left
Program up
Program down
Red teletext button
Blue teletext button
Green teletext button
Teletext
Yellow teletext button
Picture format
Reveal info
Audio language
Teletext mode button
Subtitle On/Off
Index page (Text)
Swap
Double height (Text)
Sound smart control
TV mode button (Text)
Sub page hold (Text)
Picture smart control
Sub page button (Text)
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEVISION OPERATIONS
Basic functions
Switching on and off
Switch on the television by pressing the » « button on the
television set.The device switches to standby mode, and the stand-by
indicator will illuminate.
Switch the television on with any »Numeric button« or
»
«, »
«.
Press the » « button to switch the television to standby mode.
Completely switch the television off by pressing » « on the
television set. This saves electricity.
Selecting channels
Enter single-digit or multi-digit preset channel numbers by
pressing »1 ... 0« on the remote control.
– Channels with no stations assigned are ignored.
9
Press
»
«, »
«
to move up and down channels.
Selecting AV channel positions
Use »AV« to select AV channels directly.
Adjusting the volume
Adjust the volume with
»
«
or
»
«.
Muting
Use »
again.
« to switch the sound off (mute) and to switch it on
Selecting stations from lists
You can select stations from various lists (e.g. all stations, favourites).
LIST
Press » « to open the station list. The station list »All programmes« appears.
Press
»
«,
»
« to select the station and press » « to call it up.
LIST
- You can switch between the station list and your favourites by pressing
EXIT
Press » « to finish the settings.
Picture settings
Select the desired picture setting from »USER«, »SOFT«, »NATURAL« or »RICH«
with » «.
SUB
– You can alter the »User« picture setting, see the ”PICTURE SETTINGS” chapter
on page 19.
Sound settings
Press »UPDATE « to select the audio setting »USER«, »MUSIC«, »SPORTS«, »CINEMA«
or »SPEECH«.
– You can alter the »USER« audio setting – see the “EQUALIZER” chapter on page 18.
Swap function
Allows you to swap between the program you are watching and the last selected program. i.e.
If you were watching Program 1 and change to Program 11, press the »
« button to go
back to Program 1. Press it again to return to Program 11.DOUB
PR 11
PR 01
PR 01
DOUB
DownloaDdOfUrBom Www.Somanuals.com. All Manuals Search And Download.
SETTINGS
Searching for television stations
The television is equipped with an automatic station search system. You can start the
search and can then sort the television stations into your order of preference.
There are 899 preset positions for digital stations and 100 for analogue stations, to
which you can assign television stations from the aerial or from the cable connection
(analogue programmes).
Switch on the television with » « on the television set, then press »PR+«, »PR-« on
the remote control or the TV, or by using any numeric button on the remote control.
LANGUAGE
– The »LANGUAGE« menu appears when the television
is first switched on.
Hint:
If the »LANGUAGE« menu does not appear on the
screen, follow the instructions on pages 10 and 16 to
retune all television channels using the automatic search.
10
OK
SELECT
Select language with
press » « to confirm.
»
«, »
« » « or »
«
and
The country menu will now appear. Using »
«, »
«
COUNTRY SELECTION
HUNGARY
BELGIUM
PORTUGAL
SCHWEIZ
SUOMI
»
« or » «, select the appropriate country in which the television
CZECH REP. IRELAND
DANMARK
ITALIA
will be used. Press » « to confirm selection. Search and storing
of analogue channels will begin.
DEUTSCLAND NETHERLANDS SVERIGE
NORGE
TÜRKİYE
U.K.
ESPANA
FRANCE
ÖSTERREICH
POLSKA
................
Digital channels will be searched.The search is finished when
the message DONE appears. Press » « (Green) to quit the
station search.
OK
START AUTOPROGRAMMING
BACK
BACK
EXIT
Tuning digital television stations
Select a program between 1 and 899.
Automatic search
MENU
DVB MENU
Press »
– The »MAIN MENU« menu appears.
« to open the »MAIN MENU« menu.
MANUAL SEARCH
AUTOMATIC SEARCH
RESET RECEIVER
Select »DIGITAL SETUP« with »
» « to confirm.
– The »DVB MENU« appears.
«, »
« and press
INSTALLATION
ACCESS CONTROL
SIGNAL INFORMATION
SELECT
BACK
BACK
Select »AUTOMATIC SEARCH« with
and press » « to confirm.
»
«, »
«
EXIT
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
– The »CHANNEL SEARCH - DIGITAL« menu appears and the search begins. The
automatic search may last several minutes depending on the number of television
channels received. The search is finished when the message »DONE« appears.
– At the end of the search, new TV or radio stations are automatically added to the
end of the station list.
BACK
Press » « or » « (Green) to quit the station search. The »DVB MENU« appears.
EXIT
Press » « to finish the setting.
Manual search
MENU
DVB MENU
Press »
– The »MAIN MENU« menu appears.
« to open the »MAIN MENU« menu.
MANUAL SEARCH
AUTOMATIC SEARCH
RESET RECEIVER
11
Select »DIGITAL SETUP« with »
«, »
« and press
INSTALLATION
ACCESS CONTROL
SIGNAL INFORMATION
» « to confirm.
– The »DVB MENU« appears.
SELECT
BACK
BACK
Select »MANUAL SEARCH« using »
press » « to confirm. - The »MANUAL SEARCH«
menu appears.
«, »
« and
EXIT
EXIT
Press » « or » « to select the channel number and press » « to confirm.
The search begins.
– The search is finished when the message »DONE« appears.
– At the end of the search, new TV or radio stations are automatically added
to the end of the station list.
BACK
Press » « or » « (Green) to quit the station search. The »DVB MENU« appears.
Press »EXIT « to finish the setting.
Resetting the TV
This function enables you to delete the station lists and all custom settings.
MENU
DVB MENU
Press »
– The »MAIN MENU« menu appears.
« to open the »MAIN MENU« menu.
MANUAL SEARCH
AUTOMATIC SEARCH
RESET RECEIVER
INSTALLATION
Select »DIGITAL SETUP« with »
» « to confirm.
– The »DVB MENU« appears.
«, »
« and press
ACCESS CONTROL
SIGNAL INFORMATION
SELECT
BACK
BACK
Select »RESET RECEIVER« with
press » « to confirm.
»
«, »
« and
EXIT
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Use »0«
– The »DVB MENU« appears.
–
»9« to enter the password 1234 and confirm with » « (Green).
Select »AUTOMATIC SEARCH« with »
«, »
« and press » « to confirm.
– The »CHANNEL SEARCH - DIGITAL« menu appears and the search begins. The automatic
search may last several minutes depending on the number of television channels received.
– The search is finished when the message »DONE« appears.
BACK
Press » « or » « (Green) to quit the station search. The »DVB MENU« appears.
Press »EXIT « to finish the setting.
Installation
Selecting the audio language
You can set a preferred language for all digital channels. This function activates only if the
SERVICE PREFERENCE is selected as “SUBTITLE”.
In some areas you may be able to select a preferred audio language if it is available in the
transmission. Yoüu can select from english, gaelic or welsh. If not avilable english will be
automatically selected as the default language.
12
MENU
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
INSTALLATION
AUDIO
SUBTITLE
SERVICE PREFERE.
DATA SERVICE
ENGLISH
Select »DIGITAL SETUP« with »
« to confirm.
– The »DVB MENU« appears.
«, »
«and press
ENGLISH
DATA SERVICE
ENGLISH
»
Select »INSTALLATION« by pressing »
«, »
« and
SELECT
BACK
EXIT
press » « to confirm.
– The »INSTALLATION« menu appears.
BACK
EXIT
Select the »AUDIO« line with »
«, »
«. Press » « or
»
« to select the language. Press »EXIT « to finish the setting.
Note: Scene-descriptions may be available for some programmes. You can skip between
different audio modes by pressing » MIX «.
Selecting the subtitle language
You can select the prefered subtitle language for digital channels. This function activates only
if the SERVICE PREFERENCE is selected as “SUBTITLE”.
In some areas you may be able to select a prefered subtitle language if it is available in the
transmission. You can select from english, gaelic or welsh. To activate subtitle press subtitle
(SUBT) button on remote control. If program does not have a subtitle in selected language, no
subtitle is displayed even if subtitle display is activated by subtitle button on remote control.
MENU
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
INSTALLATION
AUDIO
SUBTITLE
SERVICE PREFERE.
DATA SERVICE
ENGLISH
ENGLISH
Select »DIGITAL SETUP« with »
« to confirm.
– The »DVB MENU« appears.
«, »
« and press
DATA SERVICE
ENGLISH
»
Select »INSTALLATION« by pressing
»
«, »
«
SELECT
BACK
BACK
and press » « to confirm.
– The »INSTALLATION« menu appears.
EXIT
EXIT
Select »SUBTITLE« with »
« or » « to select the language. Press »EXIT « to finish the
setting.
«, »
«. Press
»
Note: Subtitle mode may be selected as on or off via »P100 «button. If is not working, check
with »
« that the preset position is on.
Download from Www.Somanuals.com. All Manuals Search And Download.
P100
Service Preference
You can select the service preference as »DATA SERVICE« or »SUBTITLE«
when data service is selected, MHEG (Interactive text) is available if transmission programme
has this data. if data service is not selected this function will not operate even if transmission
programme, is carrying this data. When subtitles is selected subtitles are displayed in the
preferred language selected, if not selected subtitle (SUBT) button on remote control will not
work.
MENU
INSTALLATION
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
AUDIO
SUBTITLE
SERVICE PREFERE.
DATA SERVICE
ENGLISH
ENGLISH
Select »DIGITAL SETUP« with »
« to confirm.
– The »DVB MENU« appears.
«, »
« and press
DATA SERVICE
ENGLISH
»
SELECT
BACK
Select »INSTALLATION« by pressing
»
«, »
«
BACK
EXIT
EXIT
and press » « to confirm.
– The »INSTALLATION« menu appears.
13
Select »SERVICE PREFERE.« with »
«, »
«. Press
»
« or » « to make the preference.
Press »EXIT « to finish the setting.
Data Service
You can select the language for the data service.
In some areas you may be able to select a preferred language for the data service if it is available
in the transmission. Therefore the MHEG (Interactive text) data can be displayed in either
english, gaelic or welsh. If not available english will be automatically selected as the default
MENU
language.
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
INSTALLATION
AUDIO
ENGLISH
Select »DIGITAL SETUP« with »
«, »
« and press
SUBTITLE
ENGLISH
SERVICE PREFERE.
DATA SERVICE
DATA SERVICE
ENGLISH
» « to confirm.
– The »DVB MENU« appears.
Select »INSTALLATION« by pressing
»
«, »
«
SELECT
BACK
and press » « to confirm.
– The »INSTALLATION« menu appears.
BACK
EXIT
EXIT
Select »DATA SERVICE« with »
« or » « to select the language.
Press »EXIT « to finish the setting.
«, »
«. Press
»
Access control (optional)
You can use the DVB card menu via »ACCESS CONTROL«. After inserting the card to
CI slot (Model dependant);
In this menu you can access information on the module and smart card.
MENU
DVB MENU
Press »
– The »MAIN MENU« menu appears.
« to open the »MAIN MENU« menu.
MANUAL SEARCH
AUTOMATIC SEARCH
RESET RECEIVER
INSTALLATION
Select »DIGITAL SETUP« with »
» « to confirm.
– The »DVB MENU« appears.
«, »
« and press
ACCESS CONTROL
SIGNAL INFORMATION
SELECT
BACK
EXIT
BACK
EXIT
Select »ACCESS CONTROL« with
and press » « to confirm the card.
»
«, »
«
Download from Www.Somanuals.com. All Manuals Search And Download.
Signal information
MENU
DVB MENU
Press
– The »MAIN MENU« menu appears.
»
«
to open the »MAIN MENU« menu.
MANUAL SEARCH
AUTOMATIC SEARCH
RESET RECEIVER
INSTALLATION
Select »DIGITAL SETUP« with »
« to confirm.
– The »DVB MENU« appears.
«, »
« and press
ACCESS CONTROL
SIGNAL INFORMATION
»
SELECT
BACK
BACK
EXIT
EXIT
Select »SIGNAL INFORMATION« with »
«, »
« and
press » « to confirm.
Notes:
The lower section of the menu shows the signal properties. The further the bar for
»Quality« and »Signal Strength« extends to the right, the better the reception signal.
The signal level not only depends on the settings of your receiver unit, but also
on the channel which is currently active. Remember this when aligning your aerial
using the signal level display.
14
Other items in this menu are for service information.
Press »EXIT « to quit the menu.
Special features for digital stations
You can block
channel
positions
(adult lock) and create favourite lists.
MENU
MAIN MENU
SOUND
Press » « to open the »MAIN MENU«.
The »MAIN MENU« appears.
PICTURE
–
PROGRAM TABLE
DIGITAL SETUP
FEATURES
Select »PROGRAM TABLE« with »
« to confirm.
«, »
« and press
»
OK
SELECT
EXIT
EDIT CHANNELS - TV
NAME
ZDF
SAT1
BBG
– The menu »EDIT CHANNELS - TV« appears.
#
LIST
1 2 3 4 SELECT FAVOURITE
RADIO
TV
SELECT
EXIT
EXIT
Adult lock (block channel positions)
You can block channels which are unsuitable for children.
Select the desired television channel with »
program table.
«, »
« and confirm with » « on the
Select »Adult Lock« with »
«, »
« and activate it with » « or » «.
Press » « (green) to confirm the setting. The blocked TV station is marked with a key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a list of favourites
MENU
EDIT CHANNELS - TV
Press » « to open the »MAIN MENU«. The »MAIN MENU
« appears.
#
ZDF
SAT1
BBG
NAME
LIST
Select »PROGRAM TABLE« with»
«, »
« and
press » « to confirm.
1 2 3 4 SELECT FAVOURITE
RADIO
TV
– The menu »EDIT CHANNELS - TV« appears.
SELECT
EXIT
EXIT
You can select your favourite stations and save them in up to four lists.
Select the station with »
favourites 1 – 4.
«, »
« and press »1« – »4« to enter it into lists of
– To remove, press the corresponding number button again.
– You can enter the selected station in more than one favourite list.
15
EXIT
Displaying television and radio channel lists.
MENU
EDIT CHANNELS - TV
NAME
ZDF
SAT1
BBG
Press » « to open the »MAIN MENU«.
The »MAIN MENU« appears.
–
#
LIST
Select »PROGRAM TABLE« with »
« to confirm.
You can skip between favourite channel lists,radio list (if available)
and program table by pressing (green).
«, »
« and press
»
1 2 3 4 SELECT FAVOURITE
RADIO
SELECT
EXIT
»
«
EXIT
Radio channels, may be available with digital broadcast. You can
skip between radio and televisin channel list by pressing
(red). Television channels are not display in radio mode.
»
«
Selecting and moving channel functions operate similary to
television mode.
Note:
Favourite lists are available if favourite channels are selected.
Moving channels (Favourite channels only)
You can change the order of the preset digital channels in favourite channel list.
MENU
Press » « to open the »MAIN MENU«.
EDIT CHANNELS - TV
–
The »MAIN MENU« appears.
Select »PROGRAM TABLE« with »
« to confirm.
– The menu »EDIT CHANNELS - TV« appears. (If you wish to
move radio channels press (RED). Now press
#
NAME
LIST
«, »
« and press
ZDF
SAT1
BBG
1 2
2
2
»
1 2 3 4 SELECT FAVOURITE
TV 2
MOVE
»
«
»
« (Green)
twice. The yellow “MOVE” option will now appear in
DELETE
SELECT
EXIT
EXIT
the menu.
Select the channel you wish to move with »
Press » « (yellow) to move the channel.
«, »
« .
Now, the channel is selected. Choose the new position for the
selected channel and press (yellow) again to confirm. Press
»
to finish the setting.
«
EXIT
»
The channel is moved to the previous position of the selected one.
«
Note:
Download from Www.Somanuals.com. All Manuals Search And Download.
TV guide
The electronic TV guide offers an overview of all programmes that will be broadcast
in the next week (only for digital stations).
Press » « to view the station information.
– Information about the current and following programme appears.
Please note:
Not all stations supply a detailed TV guide.
Many broadcasters supply the daily programme but no detailed descriptions.
Some broadcasters do not supply any information.
Scroll through the station information with »
«, »
«. Select the next programme
with » « or » «. Press »EXIT « to quit the TV guide.
16
Tuning analogue television stations
When digital channels are present, the analogue television channels will be assigned to channel
positions 900-999 during automatic search and when no digital channels are present the analogue
channels are present the analogue channels will be assigned to channel positions 1-100.
Autoprograming
Use »0« – »9« to select station position 900.
MENU
SETUP
CHANNEL
C 06
0
FINE TUNE
SEARCH
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Select »SETUP« with »
< >
AUTOPROGRAM
PROGRAM NO
STORE
900
«, »
« and confirm with
DIGITAL SETUP
»
– The »SETUP« menu appears.
«.
BACK
Select »PROGRAM NO« with »
«, »
« and using
» « or » « enter the channel numbers from the point they
should be saved.
Select »AUTOPROGRAM« with »
«, »
« and confirm
COUNTRY SELECTION
HUNGARY
BELGIUM
PORTUGAL
SCHWEIZ
SUOMI
with » «.
– The »COUNTRY SELECTION« menu appears.
CZECH REP. IRELAND
DANMARK
ITALIA
DEUTSCLAND NETHERLANDS SVERIGE
NORGE
TÜRKİYE
U.K.
ESPANA
FRANCE
ÖSTERREICH
POLSKA
................
Select the country using »
«, »
« » « or » « and confirm
OK
START AUTOPROGRAMMING
BACK
with » «.
BACK
– The automatic search may last a few minutes, depending
on the number of television channels received.
Note:
You can interrupt the search by pressing »EXIT «.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning channels using the search
Use »0« – »9« to select station position 900.
MAIN MENU
SOUND
MENU
PICTURE
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
PROGRAM TABLE
SETUP
FEATURES
Select »SETUP« with »
«.
– The »SETUP« menu appears.
«, »
« and confirm with
OK
SELECT
EXIT
»
Select »Program No« with »
channel with » « or » «.
«, »
« and set the preset
SETUP
CHANNEL
C 06
FINE TUNE
SEARCH
0
< >
AUTOPROGRAM
PROGRAM NO
STORE
Select »Search« with »
with » « or » «.
«, »
« and start the search
900
DIGITAL SETUP
17
– If a strong station signal is received, the search is
interrupted and the picture appears. Repeat the search until
the channel you want appears on the screen.
BACK
Select »STORE« with »
appears.
«, »
« and confirm with » «. The »STORED« message
Press » EXIT « to finish the setting.
Fine tuning analogue television stations
The television automatically tunes itself to the best possible reception. You may need
to carry out manual fine tuning in areas where there is poor reception.
MENU
SETUP
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
CHANNEL
C 06
0
FINE TUNE
SEARCH
< >
AUTOPROGRAM
PROGRAM NO
STORE
900
Select »SETUP« with
»
»
«, »
«. The »SETUP« menu appears.
« and confirm with
DIGITAL SETUP
Select »FINE TUNE« with
»
«, »
« and set it
BACK
with » « or » «.
Select »STORE« with »
appears.
«, »
« and confirm with » «. The »STORED« message
Press » EXIT « to finish the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning the analogue television channels by entering the channel numbers
Use »0« – »9« to select station position 900.
SETUP
MENU
CHANNEL
FINE TUNE
SEARCH
C 06
0
Press »
– The »MAIN MENU« appears.
Select »SETUP« with
«. – The »SETUP« menu appears.
« to open the »MAIN MENU«.
< >
AUTOPROGRAM
PROGRAM NO
STORE
900
»
«, »
«
and confirm with
DIGITAL SETUP
»
Select »PROGRAM NO« with »
the channel with » « or » «.
«, »
« and set
BACK
Select »Channel« with »
«, »
« and confirm with » «. Press » « to choose
between »S« (cable channel) and »C« (terrestrial channel). Press » « or » « to switch
up and down channels or use »1…0« to enter the channel number directly.
Select »STORE« with »
«, »
« and confirm with » «.
EXIT
18
Press » « to finish the setting.
Moving to digital setup menu
MENU
SETUP
Press »
– The »MAIN MENU« appears.
Select »SETUP« with
«. – The »SETUP« menu appears.
« to open the »MAIN MENU«.
CHANNEL
C 06
0
FINE TUNE
SEARCH
< >
AUTOPROGRAM
PROGRAM NO
STORE
»
«, »
«
and confirm with
900
»
DIGITAL SETUP
Select »DIGITAL SETUP« with »
«, »
«.
BACK
The »DVB MENU« with appears.
Special features for analogue stations
You can delete stations that have been stored more than once during the
automatic search. You can also store stations in a different preset position,
change or enter the name of
a
stations as well as skip channels.
Deleting stations
MENU
PROGRAM TABLE
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
900 ARD
901 ZDF
902 RTL
Select »PROGRAM TABLE« with »
press » « to confirm.
– The »PROGRAM TABLE« menu appears.
«, »
« and
903 SAT1
904 PRO7
905
906
FAVOURITE SELECTION
NAME
1
2S3KIP
4
Select the channel you wish to delete with » «.
«, »
LOCK
DELETE
Press » « (blue) to prepare the channel for deletion
and press » « to delete.
OK
MOVE
BACK
Sorting television analog stations
In the »PROGRAM TABLE« menu, select the station to be moved by pressing
»
«, »
«. Highlight the channel with » «.
new station with «, » « and then press
All of the stations that follow move up one position.
Select
a
»
»
« to confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering station names (maximum of 5 characters)
In the »PROGRAM TABLE« menu, select the station with »
«, »
«.
Highlight the channel with » « (yellow).
Select letters or numbers with »
«, »
«, move to the next position with » « or
»
« and repeat. Store the channel name with » « (yellow).
Skipping television stations
You can mark television channels to be skipped on the program table with
»
«, »
«. You can still select the station using the numerical buttons.
After selecting the channel, highlight the channel with » « (red).
- The station is now displayed on a red background. You can deselect the station by
pressing the red button again.
19
Parental lock (block channel positions)
You can block channels which are unsuitable for children. Select the desired television
channel with » «, » «.
PROGRAM TABLE
To block the channel, press » « (green). The blocked
TV station is marked with a key.
900 ARD
901 ZDF
902 RTL
903 SAT1
904 PRO7
905
Notes:
You can unlock the station by pressing the red button
again.
906
FAVOURITE SELECTION
NAME
1
2S3KIP
4
LOCK
DELETE
OK
MOVE
BACK
Creating a list of favourites
You can select your favourite stations and save them in up to four lists.
«, »
Select the station with »
favourites 1 – 4.
« and press »1« – »4« to enter it into lists of
- To remove, press the corresponding number button again.
- You can enter the selected station in more than one favourite list.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound settings
MAIN MENU
MENU
SOUND
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
PICTURE
PROGRAM TABLE
DIGITAL SETUP
FEATURES
Select »SOUND« with »
«.
– The »SOUND« menu appears.
«, »
« and confirm with
»
OK
SELECT
EXIT
Volume
SOUND
The standard volume is set here. This is the volume of
the television after switching on.
VOLUME
BALANCE
SOUND TYPE
SOUND MODE
AVL
STEREO
NORMAL
ON
20
Select »VOLUME« with »
setting with » « or » «.
«, »
« and adjust the
DYNAMIC BASS ON
EQUALIZER
USER
BACK BACK
Balance
Select »BALANCE« with »
with » « or » «.
«, »
« and adjust the setting
Sound type
SOUND
VOLUME
If the device receives two channel programmes, e.g. a
film with the original sound on sound channel B (display:
»Dual II «) and the dubbed version on sound channel
A (display: »Dual I«), you can select the sound channel
you desire.
BALANCE
SOUND TYPE
STEREO
NORMAL
ON
SOUND MODE
AVL
DYNAMIC BASS ON
EQUALIZER
USER
If the device receives stereo or Nicam programmes,
it switches automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo
reception quality is poor.
BACK BACK
Select »SOUND TYPE« with »
«, »
« and adjust the setting with » « or » «.
Sound mode
You can select NORMAL, SPATIAL or DOLBY VIRTUAL (optional) with » « or » «.
SPATIAL sound is an ‘expanded stereo’. It gives the impression that the two speakers in the
TV are further apart than they really are.
DOLBY VIRTUAL is based on Dolby Pro Logic decoding for production of the Left, Right,
Centre and Virtual Surround Sound channels using two loudspeaker.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby Laboratories.
Please Note
To get the surround effects in Dolby Virtual mode, you must apply a Dolby Surround encoded
input to the TV. You can’t adjust the AVL and EQUALIZER in DOLBY VIRTUAL mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic volume levelling
The television channels broadcast at different volumes. The automatic volume levelling
(AVL) function means the volume is kept the same when you switch between channels.
Select »AVL« with
»
«, »
«
and then select »On« with » « or » «.
Dynamic bass (Model dependant)
You can amplify the bass-effect using this setting.
SOUND
Select »DYNAMIC BASS« with »
select »ON« with » « or » «.
«, »
« and then
VOLUME
BALANCE
SOUND TYPE
SOUND MODE
AVL
STEREO
NORMAL
ON
DYNAMIC BASS ON
EQUALIZER
USER
BACK BACK
21
Subwoofer (Model dependantl)
A sub woofer speaker can be fitted within the TV case as an option depending to the model.
For 33”(84cm) TV sets there is an external subwoofer (optional) to be fixed as shown
below.
R
AUDIO OUT
L
AV3
AV1
AV2
Select Sound menu and press »
to switch the Subwoofer on or off.
« button to access subwoofer. Press the » « button
Please Note
If you move the loudspeaker switch, on the rear of the TV, to the external position, the internal
speakers in the TV will be switched off but the Subwoofer will remain on if switched on.
Equalizer
The equalizer offers you four preset sound settings (Music, Sports, Cinema and Speech)
and one which you can create yourself (User ). Select »EQUALIZER« by pressing
»
«, »
« and use » « or » « buttons to change the equalizer mode.
For changing user settings;
Select »EQUALIZER« by pressing »
«, »
«, »
« and
« and
EQUALIZER
press » « to confirm.
– The »EQUALIZER« menu appears.
MUSIC
SPORTS
CINEMA
SPEECH
USER
0.1 0.5 1.5 5 10
Select the »User« audio setting using »
press » « to confirm.
– The »0.1« frequency band is activated.
STORE
OK
BACK
BACK
Set the value using
. Press » « to save the setting.
Press »EXIT « to finish the settings.
»
«, »
«
and select the next frequency band by pressing
»
« or
»
«
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture settings
MENU
PICTURE
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
BRIGHTNESS
CONTRAST
COLOUR
Select »PICTURE« with »
«.
– The »PICTURE« menu appears.
Select »BRIGHTNESS«, »CONTRAST«, »COLOUR« or
»SHARPNESS« with » « and adjust them with
Press »EXIT « to finish the settings.
«, »
« and confirm with
SHARPNESS
CTI
ON
»
DDVa
ON
COLOUR TEMPERATURE
NORMAL
«, »
BACK
BACK
»
« or » « .
Note:
After a short while the »PICTURE« menu reappears. The settings are saved as the »USER«
picture default setting.
Setting the picture features
22
You can set the noise suppression of the picture.
You can set the noise suppression to one of three settings:
»NORMAL«, »WARM« and »COOL«.
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
MENU
SHARPNESS
CTI
ON
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
DDVa
ON
COLOUR TEMPERATURE
NORMAL
Select »PICTURE« with »
«.
– The »PICTURE« menu appears.
«, »
« and confirm with
BACK
BACK
»
Select »COLOUR TEMPERATURE« with »
« or » «. Press »EXIT « to finish the settings.
«, »
« and set the desired value with
»
CTI (Colour Transient Improvement):
You can improve the colour transitions in the picture by selecting ON or OFF.
DDVa (Model dependant) (Dynamic Digital Video Adaption):
You can increase the picture sharpness byselecting DDVa as ON.
IMPORTANT NOTE: Your TV has Digital Comb Filter, DLTI (Digital Luminance
Transient Improvement) features to improve picture quality. These features are set ON
and they can not be changed by the end user.
TILT (Model dependant):
Because of the structure of the picture tubes, your picture can be lost on the corners of the
screen depending on the position of your TV, north-south-east-west.
To clear this effect, you can adjust the TILT setting and prevent the picture loss (Model
dependant).
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
MENU
MAIN MENU
Press » « to open the »MAIN MENU«.
– The »MAIN MENU« appears.
SOUND
PICTURE
PROGRAM TABLE
DIGITAL SETUP
FEATURES
Select »FEATURES« with »
with » «.
– The »FEATURES« menu appears.
«, »
« and confirm
OK
SELECT
EXIT
Changing the menu language
You can change the language of the OSD menu.
LANGUAGE
Select »LANGUAGE« with
confirm with » «.
– The »LANGUAGE« menu appears.
»
«, »
« and
23
Select the language with »
« and press » « to confirm.
«, »
« or » «,
»
OK
SELECT
EXIT
Press » « to finish the setting.
Entering the switch-on and off times
A switch-on and off timer can be set in the »Date&Time
settings menu«. After this time has elapsed, the
television switches to standby mode or switches
on from standby mode. You can enter the channel
with which the television should switch on in
»Program«.
DATE & TIME SETTINGS
DATE
--/--/20--
CLOCK
--:--
--:--
--:--
ON TIME
OFF TIME
ALARM TIME --:--
PROGRAM No P1
Select »DATE & TIME SETTINGS« with »
« and confirm with » «.
«,
BACK
BACK
»
Select »DATE«, »CLOCK«, »ON TIME«, »OFF TIME«, »ALARM TIME« or
»PROGRAM NO« with » «.
«, »
Enter the switch-on or off time and the channel with »1...0 «.
EXIT
Press » « to finish the setting.
Date: Use the numeric buttons to set the real date.
Clock: Use the numeric buttons to set the real time.
On Time: Use the numeric buttons to set the time that you want your TV to be turned
on (TV should be on stand-by mode).
Off Time: Use the numeric buttons to set the time that you want your TV to be turned
off (Stand-by mode).
Alarm Time (Model dependant): Use the numeric buttons to set the alarm time that
you want your TV to alarm.
Program No: Use the numeric buttons to set the programme number that will be shown
when you set the On Time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture format
This allows you to select the picture size on corresponding to the scren type
of your TV: Availoble formats for widesereen TV sets are 16:9, 4:3, Zoom, Letterbox,
Subtitle and Panaroma. Availoble formats of 4:3 TV sets are 4:3 and 16:9.
The formats of the broadcasts (4:3 or 16:9) you watch by means of aerial input are chosen
automatically. (4:3, 16:9 and Letterbox for 16:9 TV) This feature is active if the channel
you are watching sends WSS (Wide Screen Signalling) information.
Note: The feature mentioned above is relevant for TV sets having teletext.
Widescreen TV sets:
16:9, this is the screen format of widescreen TV sets ( 28” SF/PF, 32” SF/PF).
The TV will automatically switch to this format if it detects 16:9 format from the SCART
inputs.
24
16:9
4:3
4:3, conventional TV picture format.
Zoom
LetterBox
L Box (Letter box), Useful for watching
video, some film formats and Pal-Plus
format.
Zoom, an enlarged 4:3 format
retaining the same aspect ratio.
4:3 Sets:
4:3, is the screen format of 28”, 29” and 33” TV sets But you can change the picture
format to 16:9 to able to watch the inputs in 16:9 format, i.e. some broadcasts and DVD’s.
REV
Press the » « button to page through the different picture formats and select the one you
want. The selected format will appear on the lower center of the screen for a short while.
Once you have switched the TV off the picture format will revert to the stored setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT MODE
Teletext is an information system that displays
text on your TV screen. Using the teletext
control buttons you can view pages of
information that are listed in the teletext
index.
TV/text mix
To view a page of text whilst watching a TV
programme press the » « button. The text
will be superimposedMIX over the TV
programme.
Please Note
No on screen display is available in text mode.
The contrast, brightness and colour cannot
be changed but the volume control is still
available.
MIX
Press the »
to the text page.
«
button again to return
Page search whilst watching TV
To enter Text mode
25
In Text mode press the Update button.
The TV will return to TV mode with the text
page number in the top left hand corner of
the screen.
Please Note
Make sure the TV channel you are watching
transmits teletext.
Press the » « button. The text page will
appear, normally the index page.
Enter the page number you want
using the »1...0« buttons.
To exit Text mode
The top line of the text page will
appear whilst the text searches for
your page. When the page is found
the number will remain in the top
left hand corner of the screen.
Press the
to the channel you were watching.
»
« button. The TV will return
To select a page of text
UPDATE
Press the »
page of text.
« button to viewyour selected
Find the number of the page in the
index and enter it using the »1...0« buttons.
The number of the page will appear in the
top left hand corner of the screen.
Double height text
If you have difficulty reading the
text on the TV you can double the
height of the text.
The page counter will search for your
page. When it finds it, the page will
be displayed.
To move to the next page of text press the
»
DOUB
Press the » « button. The top half of the
page will be displayed in double height text.
« button.
To move to the previous page press
the » « button.
DOUB
Press the » « button again.
P100
To return to the index page press the »
button.
«
The bottom half of the page will be displayed
in double height text.
DOUB
Press the » « button again to return to the
full page.
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT MODE
Page hold
To reveal information
If the page of text you have selected
contains sub pages, these sub pages
will automatically be displayed in
order with a delay to allow you to
read the page.
REV
Press the » « button to reveal concealed
information (quiz answers etc.).
REV
Press the » « button again to conceal the
information again.
To stop the move to the next sub
page press the » « button. STOP
will appear in theHOLD top left hand corner.
Fastext
At the bottom of the teletext screen is a row
of subject headings in red, green yellow and
blue.
To continue moving through the sub
pages press the
»
«button again.
HOLD
26
To select a sub page
The remote control has a row of coloured
buttons corresponding to the row of
coloured subjects on the screen.
Pressing one of the coloured buttons will
take you directly to the page corresponding to
the subject heading.
If the page of text you are viewing
contains sub pages, the number of
the sub page you are on and the total
number of sub pages is displayed on
the right of the screen i.e. 1/7.
Toptext (Model Dependant)
SUB
To select a sub page press the »
«
At the bottom of the teletext screen is a row
of subject headings in yellow and blue.
Pressing yellow or blue buttons on the
remote control, selects the related Subject.
Next page can be selected by pressing the red
button and previous page can be selected
by pressing the green button.
button. The page numer will and subpage
number will display at the bottom of the
screen.
Enter the number of the sub page,
using the »1...0« buttons in the
format 0001 for sub page 1.
Note: Fastext and Toptext features are not
available in every program.
The teletext will search for the sub
page. This may take some time. To
return to the TV whilst the teletext
is searching press the »
« button.
UPDATE
When the page number is found it
will appear in the top left hand corner of
the screen.
Press the »
« button again to view the
text page.UPDATE
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external equipment
Headphones (Model Dependant)
The headphones must have an impedance of between 8 and 32 ohms and have a 3.5 mm
stereo jack plug.
Plug the headphone jack into the headphone socket of the TV.
To activate headphone sound, press the mute “ ” button on the remote control (a mute
symbol will appear on the screen) and adjust headphone volume by using the VOL+ on
VOL- buttons on the remote control or front panel of the television.
Connecting a video recorder
Via SCART
Make sure the TV and video recorder are both switched off.
27
Plug one end of the SCART lead (not supplied) into the back of the video recorder and the
other end into one of the SCART sockets on the back of the TV. Switch on the video recorder
and the TV.
AV
Press the »
« button on the remote control to select AV1, AV2 or AV3 (Model dependant)
to correspond with SCART socket you are using on the back of the TV.
Please note:
You can connect a RGB external equipment via Scart 1. It is necessary to you use full
Scart cable for this purpose.
Select the video outputs of external device by using its menu to RGB if it’s available.
Via PHONO lead (Not supplied)
Make sure the TV and video recorder are both switched off.
Plug one end of the PHONO lead into the video and audio out sockets on the back of the
video recorder and plug the other end into the video and audio in sockets of the TV.
If the sound is in mono use the Audio Input L. In the SOUND menu select MONO.
AV
Press the » « button repetitively and select the AV3 mode for two scart models or select
AV4 mode for three scart models.
Download from Www.Somanuals.com. All Manuals Search And Download.
Via aerial socket
Make sure the TV and video recorder are both switched off.
Unplug the aerial lead from the TV and plug it into the aerial socket on the video recorder
(if fitted). Plug a coaxial plug into the RF out socket on the rear of the video recorder and
plug the other end into the aerial socket of the TV. Switch on the video recorder and the
TV. If your video recorder has a test signal, switch it on. (Refer to the video recorder user
guide). See ‘Tuning the TV’ and carry out the tuning procedure for the video recorder test
signal. Select a programme number 0 or between 55 and 99.
S-Video Player
If you have an S-Video player you can connect it to SCART socket 2 via an adaptor from
« button three times to select
AV
scart to S-Video/PHONO audio (not supplied). Press the »
AV2S (available for two scart models).
Via PHONO lead and S-Video socket
28
You can also connect it through the S-Video socket of the TV (Model dependant).
Plug the S-Video plug into the S-Video socket and the audio leads into the audio sockets.
Press the » AV « button repetitively to select AV3S for two scart models or AV4S for three
scart models.
R
L
MONO
VIDEO
COAX
R
AUDIO OUT
L
AV3
AV1
AV2
VIDEO OUT
ANTENNA IN
R
110-240 V~
50/60 Hz 35
W
L
DIGITAL AUDIO AUDIO OUT S-VIDOUT
TV
OUT
OUT
EURO AV
2
DECODER
VIDEO
R
L
MONO
VIDEO OUT
ANTENNA IN
R
L
EURO AV
1
TV
110-240 V~
50/60 Hz 35
W
VIDEO
DIGITAL AUDIO AUDIO OUT S-VIDEO OUT
TV
OUT
OUT
EURO AV
2
DECODER
S-Video In
VIDEO
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player
Via SCART
Make sure the TV and DVD player are both switched off. Plug one end of the SCART
lead (not supplied) into the back of the DVD player and the other end into one of the
SCART sockets on the back of the TV. Switch on the DVD and the TV.
AV
Press the »
to correspond with SCART socket you are using on the back of the TV.
« button on the remote control to select AV1, AV2 or AV3 (Model dependant)
Via PHONO lead (Model Dependant)
Make sure the TV and DVD player are both switched off. Plug one end of the PHONO
lead into the video and audio out sockets on the back of the DVD player and plug the
AV
end into the video and audio in sockets of the TV. Press the »
select the AV3 mode for two scart models or select AV4 mode for three scart models.
« button repetitively
other
and
29
Via PHONO lead and S-Video socket
You can also connect it through the S-Video socket of the TV (optional).
Plug the S-Video plug into the S-Video socket and the audio leads into the audio sockets.
AV
Press the »
scart models.
« button repetitively to select AV3S for two scart models or AV4S for three
R
L
MONO
VIDEO
COAX
R
AUDIO OUT
L
AV3
AV1
AV2
VIDEO OUT
ANTENNA IN
R
110-240 V~
50/60 Hz 35
W
L
DIGITAL AUDIO AUDIO OUT S-VIDO OUT
TV
OUT
OUT
EURO AV
2
DECODER
DVD
R
L
MONO
VIDEO OUT
ANTENNA IN
R
L
EURO AV
1
TV
110-240 V~
50/60 Hz 35
W
VIDEO
DIGITAL AUDIO AUDIO OUT S-VIDEO OUT
TV
OUT
OUT
EURO AV
2
DECODER
S-Video In
DVD
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a decoder
Via SCART
Make sure the TV and decoder are both switched off. Plug one end of the SCART lead
(not supplied) into the back of the decoder and the other end into the SCART1 on the
AV
back of the TV. Switch on the decoder and the TV. Press the »
control to select AV1.
« button on the remote
Via PHONO lead (Model Dependant)
Make sure the TV and decoder are both switched off. Plug one end of the PHONO lead
into the video and audio out sockets on the back of the decoder and plug the other end
into the video and audio in sockets on the TV.
AV
Press the » « button repetitively and select the AV3 mode for two scart models or select
AV4 mode for three scart models.
30
Please Note
You can record from one external piece of equipment to another via the TV by connecting
the playback to SCART 1 and the recorder to SCART 2 or SCART 3 and selecting AV1.
You cannot watch the TV.
You can connect NTSC supported equipment to the TV via the SCART sockets and
adjusting the colour via the PICTURE menu.
Select TINT by using »
« button and use the adjust the colour to » « or » « buttons.
R
L
MONO
VIDEO
COAX
R
AUDIO OUT
L
AV3
AV1
AV2
VIDEO OUT
ANTENNA IN
R
110-240 V~
50/60 Hz 35
W
L
DIGITAL AUDIO AUDIO OUT S-VIDOUT
TV
OUT
OUT
EURO AV
2
DECODER
DECODER
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting TV with video and satellite/digital
receiver
Satellite/digital receiver
Video
Aerial out
Rear of TV
Scart 1
Aerial out
TV Video
Scart socket Scart socket
Scart socket
Aerial
socket
Aerial in
Aerial in
31
Connecting TV with camcorder
AV1/AV2/AV3
AV3
(3 scart models only)
R
L
VIDEO
S-Video In
S-Video camcorder
Camcorder
Connecting TV games and computer
AV1
R
L
VIDEO
S-Video In
S-Video TV Game Player
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Possible cause
Solution
32
Enter the main menu followed by
digital setup option and select
installation. Set service prefere to
“data service”
No Subtitles
Enter the main menu followed by
digital setup option and select
installation. Set service prefere to
“subtitles”
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical specifications table
Picture tube 28”
29”
4:3
size/type
16:9
Screen size
70 cm 72 cm
66 cm 68 cm
2x10 W 2x10 W
100 W 105 W
Visible
screen size
Sound Output
(%10 THD)
Power
consumption
Stand by
Power
4 W
X
4 W
X
consumption
Subwoofer
33
Dolby
Virtual
X
X
X
: Model Dependant
16:9: Widescreen TV
4:3 : Conventional TV
Please note:
Using a subwoofer (Model dependant) causes 20 W extra power consumption and
supplies maximum 20 W extra sound output.
General technical specifications
Power Supply
AC: ................................................... 230Va.c 50Hz
Number of preset programmes ......... 100 analog 899 digital
RFAerial input .................................... 75 ohm (unbalanced)
Speaker impedance ........................... 8 ohm
Audio output ...................................... Stereo/NICAM (Model dependant)
Batteries ............................................ 2x AAA
Receiving channels ............................... VHF (Band I Channels 2-4)
............................................................. VHF (Band III Channels 5-12)
............................................................... UHF(Channels 21-69)
.............................................................. Cable TV (S1-S20/S21-S41)
Environmental note
This product has been made from high-quality parts and materials which can be re-used and recycled.
Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a
collection point for devices. This is indicated by this symbol on the product, in the operating manual and
on the packaging.
Please find out about collection points operated by your local authority.
Help protect the environment by recycling used products.
Download from Www.Somanuals.com. All Manuals Search And Download.
Plc
Guarantee - Television
Your new television is guaranteed against the cost of breakdown repairs for twelve
months from the date of the original purchase. (* see note below for small screen
sets)
What is covered?
• All repairs necessary as a result of faulty materials, defective components or
manufacturing defect.
• The cost of all functional replacement parts, excluding remote control batteries
• The labour costs of a Beko approved repairer to carry out the repair.
• (*) For TV's with screen sizes of 21 inches or less (measured diagonally corner
to corner) you may be offered a replacement instead of repair under guarantee.
Your dealer will advise you.
What is not covered?
• Transit or delivery damage
• Accidental damage
• Misuse, or abuse.
• Cabinet or appearance parts, including knobs and flaps
• Remote control batteries.
• Repairs or replacements required as a result of unauthorised repairs or inexpert
installation that fails to meet the requirements contained in the user instruction
book.
• Repairs or replacements to product installed or used on commercial or non-
household premises.
Important notes.
• The product is guaranteed for domestic household use only.
• The guarantee will be void if the product is installed or used in commercial or
non-household premises.
• The product must be correctly installed and operated in accordance with the
instructions contained within the Operating Instructions Booklet provided with
the product
• The guarantee is given only within the boundaries of the United Kingdom and
the Republic of Ireland.
• The guarantee is not transferable if the product is resold.
• Beko Plc disclaims any liability for incidental or consequential damages.
• The guarantee does not in anyway diminish your statutory or legal rights.
Beko House, Caxton Way, Watford, Herts, WD18 8UF, Tel: 0870 241 0128
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Plc
HOW TO OBTAIN SERVICE
Congratulations on your choice of a Beko colour television. Your new television has been
designed and manufactured to the highest quality standards to give you many years of
use. To get the best out of it, please take a few moments to read the instruction book.
Your television is supplied with a full 12 months guarantee, covering parts and labour.
Should you require service under guarantee, simply call the number below (***see note
for small screen sets)
0870 241 0128
Our service receptionist will ask you for your product model number, your retailer's name,
and the date of purchase when you call. It will assist you if you complete the box at the
bottom of this page when you take delivery of your television so that the information is
readily available should you need it. If it is necessary for an engineer to visit your home
he will normally be there within 48hrs of receipt of your call (excluding Bank Holidays)
or at your earliest convenience.
Before telephoning for service please check the trouble shooting guide in the instruction
book as often minor problems are easily identified and resolved by following the instructions
contained therein. Service visits where there is no fault with the product could incur a
charge even though the product is under guarantee.
Service is also available on the above number after the guarantee period has expired.
The cost of any repairs outside of the guarantee period is payable to the engineer at the
time of visit .
Please complete the box below for ease of reference later.
Model Number
Serial Number
Date of Purchase
Place of Purchase
Please keep your purchase receipt. The engineer will need to see it should
you require service under the 12-month Guarantee.
*** Special Note:
In home repair service is not available on models with a screen size of 21" or under. You
should contact your retailer for advice and assistance on these models.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
ADW.801
Download from Www.Somanuals.com. All Manuals Search And Download.
|