Beko Flat Panel Television 32WLU550FHID User Manual

INTEGRATED DIGITAL FULL HD COLOURTELEVISIONS  
32WLU550FHID  
Operation Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
1
LCD panels are produced with state-of-the-art technology. However, there may be missing or  
lit spots on the screen under certain circumstances. That does not mean that the product is  
faulty.  
1.1-Cleaning the screen and cabinet...  
After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We  
recommend that you do not use patented polishes or solvents on the screen or cabinet since  
they may cause damage.  
1.2-Disposing of your TV at the end of service life...  
The cold cathode fluorescent lamp found in your LCD screen contains a very small amount of  
mercury. Once your TV reaches the end of its useful life, please dispose of it in accordance  
with local government regulations or leave it at a recycling centre.  
1.3-Superior features of your integrated digital television  
This television can receive and process all analogue and digital broadcasts. This television set  
has an integrated digital and analogue receiver. The digital receiver unit processes the signals  
coming from digital transmitters and converts them into superior sound and image quality. TV  
Guide (valid for digital broadcasts only) informs you about changes in the program list briefly  
and provides program lists of all digital broadcasts for a number of forthcoming days. You  
can display detailed information about each program by pressing a single button if this feature  
is supported by the broadcaster. This television has a comprehensive and user friendly menu  
configuration.  
1.4-Receiving digital broadcasting channels  
You will need an outdoor aerial to receive digital broadcasts. Contrary to the analogue  
broadcasts, all digital broadcasts may not have their own transmission frequency. Instead,  
various digital broadcasts channels are gathered in regional or national groups called  
bouquets. You can find current transmission data from teletexts of various broadcasters or  
from TV guide or from the internet.  
NOTE:  
• HD signals must be connected to the HDMI input or component (YPbPr) inputs. See  
page 8 for external connections.  
• You should check your postcode to make sure that you are in freeview coverage area  
(www.freewiew.co.uk).  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.5-Changing the plug  
The supplied mains cable already has a mains plug fitted, however should you need to  
replace it at any time please refer to the appropriate wiring information below for your  
particular cable.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Features of your new television  
We would like this product, which has been manufactured in modern facilities in accordance  
with total quality principles, to offer you the best performance. Therefore, please read this  
entire manual carefully before you use your TV and keep it in a safe place for future reference.  
2.1-Special Features  
Full HD  
HDCP feature  
MHEG 1.06  
CI Slot input  
8-day EPG (Electronic Program Guide)  
Favourite channel list in digital mode (maximum 6 lists)  
Compatible with cable broadcasts  
Wide angle of vision  
PIP (Picture in Picture) from AV  
Scart socket, AV Socket and external sound system connection  
S-VHS and v inputs for S-Video connection  
PC connection, 2-HDMI 1.3 input  
Low energy consumption  
AVL  
SRS TruSurround sound  
DNR and MPEG NR  
Programmable power on  
Programmable power off  
250 pages Teletext  
Fastext  
Graphic equalizer  
Sharpness feature in Colour Transitions (CTI)  
Sharpness feature and picture resolution (LTI) in black-white transitions  
A clearer Picture made possible with a Digital Comb Filter  
Active Contrast  
On-screen viewing of all settings, program numbers and all the processes  
Manual Fine Tuning  
100 Analog Program memory  
1000 Digital channel memory  
Infrared remote control equipped with all functions  
Parental Control  
Ability to watch NTSC broadcast via Scart input  
User friendly on-screen menu system  
4:3, 16:9, 14:9 Letterbox, Subtitle and Panorama picture formats  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks  
or registered trademarks of HDMI Licensing LLC.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Important Safety Instructions  
This symbol is used to warn the user about the “dangerous voltage” contained  
inside the housing of the product that may create a risk of electrical shock.  
This symbol is used to remind the user important usage and service instructions  
supplied with the TV.  
1) Please READ the operating  
Never install the TV into closed places  
such as bookcases or cabinets unless  
adequate ventilation is provided.  
instructions before using  
the TV for the first time.  
2) Please observe the  
instructions contained in  
the Operating Instructions.  
3) Please consider all warnings.  
4) MAKE SURE that all  
power connections  
(extension cables and the  
connections between the  
8) DO NOT COVER the  
ventilation openings  
TV components) have  
been made properly and  
of the TV with items  
in accordance with the manufacturer’s  
instructions. Before making or changing  
the connections, power off the TV and  
unplug the mains connection plug.  
such as newspapers,  
table-clothes, curtains,  
etc. Overheating causes damage and  
shortens the service life of the TV.  
5) If you have any doubts regarding the  
installation, operation or safety of the TV,  
please REFER to the retailer.  
9) Your TV may be damaged  
if you place it under  
direct sunshine or close  
to a heater. Please  
6) BE CAREFUL with glass panels and  
covers on the TV. The screen glass  
may break and cause serious injuries if  
something hits it.  
abstain from using the  
product in very hot or  
humid locations or in places where the  
temperature is likely to decrease below  
5°C (41°F). DO NOT PLACE on or near  
the TV any hot objects or items with  
open flame such as candles or any night  
lamps. The high temperature can melt  
plastic parts and cause a fire.  
7) To ensure adequate ventilation, please  
leave a clearance area of at least 10 cm  
around the television. This clearance  
prevents the TV from overheating and  
consequently causing damage.  
Using the TV in dusty environments  
should also be avoided.  
Never block the slots and openings by  
placing the TV on a bed, sofa, pillow or  
other similar surfaces.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
10) Never operate your  
TV close to water.  
13) Make sure that the power  
cable is not stepped on and  
that there is no bending  
Operating your TV,  
for example, near a  
bathtub, washbasin,  
at the plug sections, plug  
heads and TV output point.  
kitchen washbasin, washing basin, wet  
basement and swimming pool can cause  
fire or electric shock.  
14) Use only the add-ons/accessories  
specified by the manufacturer.  
Do not allow your TV to get wet. Never  
pour any liquids onto  
15) Use only brackets or  
stands specified by the  
the TV. Do not operate  
manufacturer or sold along  
with the product. Place your  
device on a level surface.  
your TV if any solid  
or liquid substance  
enters into it. This can  
cause electric shock and your TV may be  
damaged. Have it checked immediately  
by qualified personnel.  
Keep open flame sources (such as  
candles) away from TV  
in order to avoid risk of  
fire.  
16) Unplug the power cable  
during thunderstorms or  
when you will not use your  
TV for a long period of time.  
11) DO NOT USE  
17) Consult authorised  
headphones at extremely high volume  
levels since this may  
cause permanent loss of  
hearing.  
service personnel for  
service requirements.  
Never attempt to  
repair the TV yourself.  
Opening the cabinet  
12) Operate your TV only in  
the 230 V 50Hz voltage  
range. Use the AC power  
cable supplied with the  
product. If your TV is  
can expose you to dangerous voltages  
or other hazardous situations. Service is  
required in situations such as damage  
to the power cable of the TV or its plug,  
water spills or substances falling into  
the TV, the TV is subjected to rain or  
moisture, it does not operate normally or  
it is dropped.  
a grounded (Class I)  
product, then it must  
certainly be connected to  
a grounded socket.  
The socket into which you plug in the  
AC power cable must be within easy  
reach.  
Unplug the TV in order to disconnect  
it from mains power.  
Note: Do not use defective sockets. Make  
sure that the plug is firmly inserted into  
the socket. If the plug remains loose,  
then it can cause fire due to arcing. Refer  
to an electrician to have your socket  
replaced.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
18) Wipe the TV cabinet  
20) Disposing of the exhausted  
clean with a soft and dry  
batteries:  
cloth. Wipe dust from the  
Dispose of the exhausted  
screen gently with a soft  
batteries in accordance with  
the local laws and regulations in order to  
protect our environment.  
cloth. Stubborn stains  
can be cleaned with a  
cloth slightly moistened  
with soap and lukewarm water. Never  
use solvents such as thinner or gasoline  
for cleaning. Unplug the AC power cable  
from the socket when cleaning the TV.  
Otherwise, there is the risk of electric  
shock.  
21) Do not dispose of your TV  
with regular household waste.  
Observe local laws and  
regulations for disposal.  
22) For stand fitting and removal please refer  
to loose leaf sheet inside TV carton.  
19) Do not dispose of the  
batteries in fire.  
Note 1: This is a Class A product. During  
operation, the device can cause radio  
interference. In this case the user may  
have to remedy this. Please contact your  
specialist dealer.  
Do not short circuit,  
dismantle or overheat  
the batteries. There is  
the risk of explosion  
if the batteries are not replaced  
correctly. Replace only with the  
same or equivalent type batteries.  
Note 2: Electromagnetic fields can cause  
temporary performance degradation. This  
can be distinguished as noise in the image.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start  
4
Remove your television carefully from its  
box. You can keep the packaging of your  
television to use in future.  
Not 1: Your TV will switch to the STANDBY  
mode in five minutes if there is no broadcast  
signal from the aerial.  
Note 2: Your TV is equipped to operate with  
TV buttons in case your remote is broken or  
the batteries are exhausted.  
Contents of the box  
Power cable  
Remote control  
3. To power on your television,  
press any numerical key or PR+ or  
PR- keys on the remote control.  
For this process, you can also use  
the buttons on your TV. The picture  
will appear on the screen after a  
short while.  
2 batteries  
Note: Scart, HDMI, VGA and PHONO  
cables are not supplied with the device.  
4.1-Aerial connection  
Note: If you are not going to use your  
television for a long time, unplug its power  
cable from the socket.  
Initial power on and performing  
settings  
To set up your television, read the sections  
on the TV controls and making the channel  
settings.  
4.2-Powering on your TV and  
the initial use  
4.3-Batteries  
1. Insert the power cable into the power  
supply input located on the back panel of  
the LCD TV.  
2. Insert the power cable plug supplied with  
the device into the mains socket.  
Open the lid of the battery compartment  
and make sure that you have placed the  
batteries in the correct direction. For this  
remote control, UM-4, IEC R03 or AAA 1.5 V  
batteries are suitable.  
Do not throw your old batteries into the fire,  
discard them in a dedicated waste area for  
this purpose.  
OR  
Do not mix used batteries with new ones or  
different types of batteries together.  
The performance of the remote control will  
be reduced at a distance of 8 meters from or  
at an angle of 30 degrees beyond the centre  
of the TV.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Your new television  
5.1-TV Control Panel  
Volume Level Down/Up  
button  
Program Down/Up button  
or  
or  
or  
Menu button / Source selection button  
or  
On-Off / Standby button  
or  
or  
Stand by indicator  
Bright light: TV is in Stand-by  
Dimmed light: TV is On  
No light: Power Cable is not connected.  
or  
5.2-Rear and Side External Connections  
1-Component video input (Y)  
2-Component audio input (L)  
3-Component video input (Pb)  
4-Component audio input (R)  
5-SPDIF Digital audio output  
6-Component video input (Pr))  
7-VGA (PC connection input))  
8-AV1 scart  
9-AV2 scart)  
10-Antenna input  
11-PC audio input  
12-Power input  
13-Stereo Headphone socket  
14-S-VHS input  
15- Video input PHONO connector  
16-Sound input PHONO connector (Left/L)  
17-Sound input PHONO connector (Right/R)  
18-CI slot input  
19-HDMI 1 input  
20-HDMI 2 input  
Please see Technical Specifications Table on page 31 for the available external connections  
on your television.  
• Please do not use the video PHONO and S-Video connection simultaneously, otherwise  
these two devices might influence the picture quality of one another.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.3-Remote Control  
Stand-by mode On/Off button  
Temporary sound mute (Mute) button  
AV modes selection menu button  
Picture Format selection button  
PAT (Picture and Teletext) Mode  
ZOOM mode selection button  
Subtitle selection button (D)  
Not used on this model (D)  
Numeric buttons  
TV, Radio, Data, Favorite channel selection button (D)  
Page Stop button in Txt mode (Hold)  
EPG selection button (D)  
Question/Answer button in Txt mode (Reveal)  
Information button  
Index page button in Txt mode  
MENU button  
Exit menu button  
Return to previous menu button  
Up movement button (Menu)  
Next page selection button in Txt mode  
Down movement button (Menu)  
Previous page selection button in Txt mode  
Left movement button (Menu)  
Change source in PIP mode button  
Right movement button (Menu)  
Change source in PIP mode button  
Menu selection confirm  
Program table selection button  
Volume down button  
Volume up button  
Program forward selection button  
Program backward selection button  
Red teletext button  
Start Digital Teletext  
Green teletext button  
Yellow teletext button  
Blue teletext button  
Teletext/Mix selection button  
Equalizer selection button  
Teletext page enlarge button (Double)  
Picture Mode selection button  
Page update button in Txt mode (Update)  
Note: In the analog mode  
when no menu is open on the  
screen, Up/Down movement  
buttons function as program  
forward/backward button and  
Left/Right movement buttons  
function as Volume up/down  
button.  
Last viewed program selection button  
Sub page button in Txt mode (Sub Page)  
Freeze Picture button  
Time Display button  
Change PIP size button  
PIP selection button  
(D) : Digital Mode Only  
Change PIP position button  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Performing the initial power-on settings  
6
6.1.5-Temporary sound mute  
6.1-TV controls  
6.1.1-Temporary on/off (STAND-BY)  
(MUTE)  
To temporarily mute the sound of  
your television, press the MUTE  
button on your remote control.  
In that case, MUTE symbol will  
appear on the screen. When you  
press the same button a second  
When you press the red STAND-  
BY button located on the upper left  
hand side of your remote control  
while your television is switched  
on, the sound and the picture will  
go off. In the stand-by mode, the  
power indicator of your television  
will glow brighter. To switch your  
television back on, either press  
any numeric button or PR+/PR-  
buttons.  
time, the sound will be restored. If you press  
the VOL+ button while in the Mute mode,  
the sound level is increased and the Mute  
function is aborted.  
6.1.6-Returning to Selected Program  
(SWAP)  
Caution! If you are not going to use your  
television for a long time, unplug its power  
cable from the socket.  
Allows you to switch between the  
current program you watch and  
the last selected program. For  
6.1.2-Channel Selection  
example, if you change the channel  
to Program 11 while you were watching  
Program 1, press SWAP button to switch  
back to Program 1. Press SWAP button to  
switch back to Program 11 again.  
You may select whichever program  
number you would like by pressing  
the PR+/PR- buttons located on  
your television and your remote  
control. To select the programs  
that are above 9, you can use  
the Numerical buttons. You may  
enter the number of the program  
you would like to select using the  
numerical buttons. For example,  
to switch to the program number  
12, press respectively the numeric  
buttons 1 and 2 on your remote  
control. You can perform the program  
selection also from the Program Table.  
6.1.7-Main Menu  
Press the MENU button. The Menu  
including all the setting menus will  
appear on the screen. Navigate  
through the Menu titles with the  
Up/Down movement buttons and  
press the OK button to select the  
desired menu. If you want to exit  
the menu in any step, just press the EXIT  
button. Press BACK or MENU buttons to  
return to the previous Menu while you are in  
a sub menu.  
6.1.3-Digital TV, Analog TV and AV  
Mode Selection  
Press the AV button on your remote  
control. SOURCE menu will be  
displayed. Select DIGITAL TV,  
ANALOG TV or desired AV mode  
from the Source menu with Up/  
Down movement buttons and  
confirm with OK button so that your  
television will switch to the source  
you have selected.  
MAIN MENU  
SOUND  
PICTURE  
PROGRAM TABLE  
SETUP  
FEATURES  
6.1.4-Performing the Volume setting  
You can adjust the volume of your  
television by using the VOL+/VOL-  
buttons on your remote control.  
SELECT  
EXIT  
Download from Www.Somanuals.c1om0. All Manuals Search And Download.  
SETUP  
6.2-Turning on the TV and  
Setting the Channels  
AUTO TUNING  
MANUAL TUNING  
FIRST TIME INSTALLATION  
When you turn on your television for the  
first time, FIRST TIME INSTALLATION  
CHECK AERIAL CABLE IS CONNECTED.  
PRESS OK KEY TO CONTINUE message  
is displayed. If the antenna connections  
are correct, press OK button to continue.  
COUNTRY SELECTION menu will be  
displayed. Select the country by using Up/  
Down, Left/Rightmovement buttons  
and press OK button to start the auto  
programming. Channel Searchmenu will be  
displayed and digital channels are scanned  
and stored in the memory.  
After completion of the searching process  
Channel Search Results menu will  
be displayed. Number of TV and Radio  
channels already detected and stored in the  
memory at the end of the search process will  
be displayed in this menu. Finish the Digital  
channel searching process by pressing the  
OK button.  
BACK  
SELECT  
Select AUTO TUNING tab and  
confirm by pressing the OK button.  
COUNTRY SELECTION menu will  
be displayed.  
COUNTRY SELECTION  
BELGIUM  
CZECH REP.  
DANMARK  
DEUTSCHLAND  
ELLADA  
NORGE  
ÖSTERREICH  
POLSKA  
PORTUGAL  
SCHWEIZ  
SUOMI  
ESPANA  
FRANCE  
SVERIGE  
TÜRKİYE  
U.K.  
HUNGARY  
IRELAND  
..........................  
ITALIA  
NETHERLANDS  
PRESS OK KEY TO START ANALOG  
SEARCH PRESS MENU KEY TO EXIT  
message will be displayed. You can make  
Analog channel tuning with OK button  
or finish the searching process by pressing  
the MENU button.  
START AUTOPROGRAMMING  
Select the country by using Up/  
Down, Left/Rightmovement  
buttons and press OK button  
to start the auto programming.  
Channel Searchmenu will be  
displayed and digital channels are  
scanned and stored in the memory.  
6.3-Performing Digital Tunings  
You can either tune the Digital programs  
automatically or manually and store them in  
your television.  
6.3.1-Automatic Tuning of Channels  
and Storing in the Memory  
Channel Search  
Waiting for signal...  
Press AV button on your remote  
control, select DIGITAL TV tab  
from the SOURCE menu by using  
Up/Down movement buttons and  
confirm by pressing the OK button.  
Your TV will switch to Digital mode.  
Press MENU button, MAIN MENU  
will be displayed. Select SETUP tab  
with Down movement button and  
confirm with the OK button. SETUP  
menu will be displayed.  
Service found:  
TV:  
0
Radio:  
0
Other:  
0
Stop Search  
Note: You can also access Auto Tuning  
menu from the System Menu submenu  
under Digital Features menu.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Highlight the Channel tab by  
means of Up/Down buttons and  
directly enter the frequency number  
of the channel you want to search,  
if you know, by using the numeric  
keys on the remote control. If you  
don’t know the frequency number,  
you can scan frequencies by using  
the Left/Right movement buttons.  
After entering the frequency you  
ADDITIONAL INFORMATION  
Please note that Encrypted channels  
may not be stored after scanning in  
the Digital TV channels. If this is the  
case then you will need to rescan the  
channels again but this time change the  
LIST SCRAMBLED CHANNELS from  
AUTO to ON:  
want to search, highlight Update of  
Channel List tab with Up/Down movement  
buttons and select either one of Add  
channels, Replace channels or Erase  
channel list items, then press OK button to  
start searching. Channels will be searched  
or changed according to the search method  
you have chosen.  
1
2
3
4
5
Press Menu.  
Select Features.  
Select Digital Features.  
Select User Interface Options.  
List Scrambled Channels will show.  
Change “Auto” setting to “ON”  
Press Exit button to exit the Menu.  
6
You will need to rescan the digital TV  
channels:  
Channel Search  
Waiting for signal...  
1
2
3
Press Menu.  
Select Setup.  
Service found:  
Select Auto Tuning and press the OK  
button to start the channel scan and this  
time store the Scrambled channels.  
TV:  
0
Radio:  
0
Other:  
0
Stop Search  
6.3.2-Manual tuning of channels and  
storing in the memory  
Add Channels : With this option, the new  
channels in the frequency which is desired to  
be manually searched will be scanned and  
added to the existing channel list.  
Press MENU button in digital mode  
and MAIN MENU will be displayed.  
Select SETUP tab with Down  
Replace Channels : With this option, you  
can update the existing channel list with the  
modifications made by the broadcasting  
enterprise.  
movement button and confirm with  
the OK button. SETUP menu will  
be displayed. Select MANUAL  
TUNING tab and confirm by  
Erase Channel List : With this option,  
you can delete all channels in the existing  
channel list to store only the new channels in  
the desired frequency into the memory.  
pressing the OK button. Manual Search  
Parameters menu will be displayed.  
Manual Search Parameters  
Channel  
21  
474000  
Add channels  
Note: You can also access Manuel Tuning  
menu from the System Menu submenu  
under Digital Features menu.  
Frequency  
Update of Channel List  
6.3.3-First Time Installation  
If you select this function, all channel  
information in the memory will be deleted.  
The OSD where country selection shall be  
made is displayed and channel search is  
made automatically. First, digital channels  
are searched. You can start Analog channel  
search by pressing the OK button after the  
digital channel search is completed.  
Change  
Back  
Start  
Download from Www.Somanuals.c1om2. All Manuals Search And Download.  
6.3.4-Program Table  
6.3.4.2-Creating favorite channels  
list  
With the program table, you can see the  
stored channels in a list, switch between  
TV channels and Radio channels or create  
your favorite channels list for 6 TV and Radio  
channels according to your preference.  
You can create 6 favorite channel  
lists according to your personal  
preferences. To do this press  
the RED button when you are in  
Program table. Favorite Lists will  
Select the PROGRAM TABLE item  
from the main menu by means of  
Up/Down movement buttons to  
access program table and press OK  
button to confirm. Program Table will  
be displayed. You can also access  
be displayed. All TV channels can  
be seen on the Left hand side and  
favorite channels on the Right hand  
side. In All TV Channels list select  
the channel you want to add to the  
favorites list by using Up/Down  
the program table menu directly by pressing  
the OK button on your remote control when  
there is not any open menu on the screen.  
movement buttons and press OK button  
to confirm; name of the channel you have  
selected will be displayed on the favorite  
channels list. Repeat the same steps fore  
every channel you want to add. To create  
a different favorites list, you can change the  
favorite channels list by pressing FAV button  
on your remote control and add channels  
to these lists as described above. To select  
directly the favorite channels lists you have  
created, you can use the FAV button on  
your remote control.  
All  
1 Channel  
2 Channel  
3
4
5
Back  
Select  
Change List  
Edit List  
Note: You can also access the Favourite  
Lists menu from the Digital Features  
menu.  
6.3.4.1-Displaying Television and  
Radio channel lists and selecting  
the channels  
6.3.5-Electronic TV Guide (EPG)  
If it is supported by the broadcasting  
enterprise, the electronic TV guide gives  
entire general information about the  
programs of the next 7 days (for digital  
channels only).  
When the program table menu is  
opened, all TV channels stored  
in the list are displayed. You can  
navigate between the TV and radio  
channels with Up/Down, Left/  
Right movement buttons or you  
can select any channel you wish  
to watch or listen to by pressing  
the OK button. Press the RED  
button on the remote control when  
your are in the program menu to  
switch to the Favorite Channels list.  
Favorite Lists will be displayed. You  
can also select the TV and Radio  
channels directly by means of the  
FAV button on your remote control.  
To display the Electronic TV Guide,  
press EPG button on your remote  
control. Electronic TV Guide will be  
displayed.  
Program  
13:15  
15:10  
Reality Show  
All  
Monday 18/8/2007  
13:45  
1 BBC ONE  
2 BBC TWO  
3 ITV1  
4 CHANNEL 4  
5 FIVE  
13:15  
15:10  
17:20  
20:45  
21:50  
22:50  
Program  
News  
Film  
TV Series  
Film  
Program  
6 ITV2  
Change List  
Exit  
Next Day  
Select  
Previous Day  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You can select the channel by using  
the Up/Down movement buttons  
and navigate through the program  
data with Right movement button.  
To get further information about  
the program press INFO button  
and detailed information about the  
selected program will be displayed.  
Press the GREEN button to display  
next day’s program information,  
press the RED button to display  
previous day’s program information  
and press OK button to add  
To perform language selection,  
select Subtitling Language 1,  
Subtitling Language 2, Audio  
Language 1, Audio Language 2  
tab from the Language Settings  
menu by using Up/Down  
movement buttons and make your  
language selection with Left/Right  
movement buttons. You can also  
select subtitles directly by SUBT  
button on your remote control or  
make sound selection by AUDIO button.  
6.3.6.2-Access Control  
Reminder to any program. You can  
use the FAV button on your remote  
control to switch between TV, Radio  
and Favorites lists in the EPG menu.  
With this feature you can restrict channels  
that are not appropriate for children and  
set age restriction for programs being  
broadcasted.  
6.3.6-Digital Features  
Access Control  
Lock/Unlock Channels  
Change PIN  
To enter digital features menu,  
select FEATURES tab from the  
main menu by using Up/Down  
movement buttons. Select DIGITAL  
FEATURES tab from FEATURES  
menu by using Up/Down  
movement buttons and press OK  
button to confirm. DIGITAL FEATURES  
menu will be displayed.  
Select  
Back  
Digital Features  
Language Settings  
Access Control  
User Interface Options  
Timers  
Favourite List  
No Common Interface Module Present  
System Menu  
Lock/Unlock Channels: Select Lock/  
Unlock Channels tabs from Access Control  
menu and press OK button to confirm. All  
TV Channels list will be displayed; select the  
channel you want to restrict with Up/Down  
movement buttons and press OK button  
to confirm. x mark will be displayed at the  
beginning of the channel name indicating  
that the channel is restricted. To remove  
the restriction, repeat the same steps. To  
view the restricted channel enter the correct  
password into the displayed password  
screen. The channel will not be displayed  
unless the correct password is entered.  
Select  
Back  
You can select the menu headings with Up/  
Down movement buttons to make settings.  
6.3.6.1-Language Settings  
You can select subtitle and sound language  
provided that the broadcast is supported  
for all digital broadcasting channels. Unless  
you make any selection, the language  
supported by the broadcaster will be selected  
automatically.  
Note 1: To re-prevent access after entering  
the correct password and displaying the  
restricted channel, your television has to be  
switched to Standby mode and turned on  
again.  
Download from Www.Somanuals.c1om4. All Manuals Search And Download.  
Note 2: The password for both of these  
features has been set as 0000 at the factory.  
You can change the password as you wish  
under Change PIN item in the Access  
Control menu.  
desire by means of the Program Table. Press  
AV button on your remote control, select  
ANALOG TV tab from the SOURCE menu  
by using Up/Down movement buttons  
and confirm by pressing the OK button.  
Your TV will switch to Analog mode. Press  
the MENU button on your remote control.  
Select SETUP tab with Down movement  
button and confirm with OK button. Setup  
menu is displayed.  
6.3.6.3-User Interface Options  
From this menu, you can decide whether  
to display the scrambled channels in the  
program table or not. If List Scrambled  
Channels is set to ON, all channels will  
be displayed, if it is set to OFF, scrambled  
channels will not be displayed and if it is set  
to AUTO and a CI card is installed to your  
television, then the scrambled channels  
supported by the card will be displayed.  
SETUP  
SYSTEM  
I
CHANNEL  
FINE TUNE  
SEARCH  
S06  
0
P13  
PROGRAM NO  
STORE  
AUTOPROGRAM  
6.3.6.4-Timers  
SELECT  
BACK  
In this menu you can view Reminders you  
had entered from the EPG or change or  
delete the entered Reminders.  
Select PROGRAM NO tab by pressing  
the Up/Down movement buttons in Setup  
menu, enter the channel number to be  
searched and stored automatically, then  
select AUTOPROGRAM tab by using the  
Up/Down movement buttons and press  
OK button; Country Selection menu will be  
displayed.  
6.3.6.5-Favourite Lists  
Please see 6.3.3.2-Creating favorite channel  
list for detailed explanation of this feature.  
6.3.6.6-Common Interface Module  
In this menu, you can make the CI Module  
settings that you can attach to your  
television.  
COUNTRY SELECTION  
BELGIUM  
CZECH REP.  
DANMARK  
DEUTSCHLAND  
ELLADA  
ESPANA  
FRANCE  
HUNGARY  
IRELAND  
NORGE  
ÖSTERREICH  
POLSKA  
PORTUGAL  
SCHWEIZ  
SUOMI  
6.3.6.7-System Menu  
You can display your television’s hardware  
and software data under this menu.  
SVERIGE  
TÜRKİYE  
U.K.  
..........................  
6.4-Performing Analog  
Tunings  
ITALIA  
NETHERLANDS  
START AUTOPROGRAMMING  
You can either tune the Analog channels  
automatically or manually and store them in  
your television.  
In the Country Selection menu, select  
the country, whose broadcast you would  
like to watch in priority, by pressing the  
right/left movement buttons and start  
autoprogramming by pressing the OK  
button. The channels will be automatically  
searched and those found will be stored in  
memory starting from the program selected  
in the Setup menu. At the same moment,  
the Autoprogram menu will be displayed  
and a marker indicating the progress of the  
autoprogramming will appear as shown  
below.  
6.4.1-Automatic tuning of channels  
and storing in the memory  
Note: If your television does not receive any  
antenna broadcast for a period of 5 minutes,  
it automatically switches to the stand-by  
position. The countdown OSD is displayed  
on the screen during the last 1 minute  
(applicable for Analog mode only)  
You can tune the programs automatically  
with the Autoprogram function of your  
television and then sort the channels as you  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTOPROGRAM  
SEARCHING  
STOP  
6.4.2.2-If you do not know the  
channel number  
% 20  
Press the MENU button. Move  
to the SETUP menu by pressing  
To stop the process at any given time,  
please press the MENU button. The  
Program Table, which will allow you to sort  
the channels as you wish, will be displayed  
after the automatic search is complete.  
the Down movement button in  
the Main Menu and confirm your  
selection with the OK button.  
Setup menu will be displayed.  
Select the system in which you  
6.4.2-Manual tuning of channels and  
storing in the memory  
would like to make the search  
from the SYSTEM tab. Move into  
CHANNEL tab by pressing the  
6.4.2.1-If you already know the  
channel number  
Down movement button. Press OK  
on your remote control to select  
Press the MENU button. Move to the  
SETUP menu by pressing the Down  
movement button in the Main Menu and  
confirm your selection with the OK button.  
Setup menu will be displayed.  
S” for cable channels and “C” for  
channels received via the antenna.  
Select SEARCH tab using the Up/Down  
movement buttons, and scan the channels  
in ascending order with Right movement  
button and in descending order with Left  
movement button. If the channel that is  
found is of your liking, select the STORE tab.  
Then store it in the memory by pressing the  
Right or Left movement buttons. Repeat  
the same procedure for other channels by  
selecting the program number of your choice  
from the PROGRAM NO tab. If the channel  
you found is not of the desired quality and  
requires Fine Tuning or if you would like to  
rename the channel, refer to the relevant  
sections.  
SETUP  
SYSTEM  
I
CHANNEL  
FINE TUNE  
SEARCH  
S06  
0
P13  
PROGRAM NO  
STORE  
AUTOPROGRAM  
BACK  
CHANGE  
Select the system in which you  
would like to make the search  
from the SYSTEM tab. Move into  
CHANNEL tab by pressing the  
6.4.3-Fine Tuning  
Down movement button. Press OK  
on your remote control to select  
If the channel you found is not of  
the desired quality and requires  
S” for cable channels and “C” for  
Fine Tuning, then select the FINE  
channels received via the antenna.  
TUNE tab by pressing the Down  
Move onto the PROGRAM NO tab  
and using the number buttons enter  
the channel number in which you  
movement button in the Setup  
menu. Using the Left/Right  
movement buttons on your remote  
control, adjust the broadcast  
would like to have the channel stored. If the  
broadcast viewed on the screen is of your  
desired quality, first move onto the STORE  
tab with the down movement button to  
store in the memory the selection you have  
made and store the channel by pressing  
the Left or Right movement buttons. The  
prompt STORED will be displayed briefly.  
The channel will be stored according to the  
program number of your choice. You can  
tune and store in memory other channels the  
same way. In the event that you wish to exit  
the channel settings menu for any reason,  
simply press the EXIT button.  
displayed on the screen to your  
desired quality. Under normal circumstances,  
you will not require to use the Fine Tune  
function. The AFC values of your television  
will automatically adjust and lock themselves  
to the channel. However, you might need  
it in case the television transmitters do not  
operate according to the standards. To store  
in the memory the settings you have made,  
select the Store tab and press the Right or  
Left movement button.  
Download from Www.Somanuals.c1om6. All Manuals Search And Download.  
6.4.4-Program Table  
After setting is complete, press the EXIT  
button to exit the menu.  
Press the MENU button. Move to the  
PROGRAM TABLE tab by pressing the  
Down movement button in Main Menu and  
confirm your selection with the OK button.  
Program Table menu will be displayed.  
6.4.4.3-Skipping a stored channel  
In the event that you do not wish  
to see certain programs while  
navigating through the channels  
using the PR+/PR- buttons,  
PROGRAM TABLE  
then you can use this function. Select the  
program that will be hidden by pressing the  
up/down or right/left movement buttons.  
“Press the “RED” button. The name of the  
program to be skipped shall appear in red.  
You may perform this procedure for more  
than one program. To view the skipped  
program, directly enter the program number  
using the numeric buttons. To cancel the  
program skipping process, press again the  
RED” button. After setting is complete,  
press the EXIT button to exit the menu.  
00  
05  
10  
11  
12  
13  
14  
01 CHANNEL 06  
02 CHANNEL 07  
03  
04  
08  
09  
SKIP  
NAME  
DELETE  
MOVE  
SELECT  
BACK  
6.4.4.1-Switching the locations of the  
stored channels  
Select the program you would like  
to relocate by pressing the Up/  
Down or Left/Right movement  
buttons. “Press the “GREEN”  
button. Green will blink. Move to  
the other program you would like to  
relocate by pressing the up/down  
or right/left movement buttons.  
“Finish the relocation process by  
pressing the “GREEN” button.  
6.4.4.4-To name the channels  
You can assign your program or  
programs of choice the names that  
have a maximum of five characters.  
Select the program you would like  
to name from the Program Table by  
pressing the up/down or right/left  
movement buttons. “Press the “YELLOW”  
button. An empty space appears beside  
the channel for which you would like to  
specify name information. Here, choose the  
desired letter, number or sign using the up/  
down movement buttons. For the second  
character, press the right movement  
button and then select the desired letter,  
number or sign again with the up/down  
movement buttons. After entering all the  
characters, store the name you have written  
in the memory by pressing the “YELLOW”  
button. To write names for any of the  
other programs, simply repeat the above  
procedure. If you want to exit the menu,  
simply press the EXIT button. If the program  
is not named, then the channel number of  
that program will be displayed automatically.  
The channel in the first program  
number you selected has been  
moved to your second selected  
program number and the channels between  
both program numbers have been shifted to  
the initially selected program number. After  
setting is complete, press the EXIT button to  
exit the menu.  
6.4.4.2-Deleting a stored channel  
Select the program you would like  
to delete by pressing the up/down  
or right/left movement buttons.  
“Press the “BLUE” button. The  
blue button on the menu will blink  
for approval. “You may perform the deletion  
process by pressing the “BLUE” button  
or you may abort the deletion process by  
pressing the MENU button. “Once you pres  
the BLUE button, the selected program  
is deleted and the following channels are  
transferred to after this program number.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Settings of Your New Television  
7.1- Sound Menu Settings  
7.1.4-AVL (Automatic Volume Limiting)  
You may perform volume settings by  
using the VOL+ or VOL- buttons on  
your television or the VOL+/VOL-  
buttons on your remote control. You  
can perform other Sound settings by  
entering the Sound menu. For this,  
press the MENU button on your  
remote control. Select SOUND by  
pressing the Up/Down movement  
buttons from the main menu and press the  
OK button. The Sound menu is displayed.  
SOUND  
Television transmitters have different sound  
levels. This can be noticed as high and low  
volume levels in different channels while  
switching from one program to another. Using  
the Left/Right movement buttons, select ON.  
The AVL (Automatic Volume Limiting) function  
maintains the same sound level as you switch  
from program to program. Select OFF to  
cancel it.  
7.1.5-Headphones  
By connecting headphones to your television  
you can listen to the program sounds  
VOLUME  
independently from your television. To turn up  
and down the headphone volume level, select  
HEADPHONE tab from the Sound menu and  
adjust the volume level by using the Left/Right  
movement buttons. When you want to hear the  
sound from the headphone only, just press the  
MUTE button on your remote control.  
BALANCE  
SOUND TYPE  
STEREO  
SOUND MODE  
AVL  
EQUALIZER  
HEADPHONE  
NORMAL  
OFF  
CHANGE  
BACK  
7.1.6-SRS TruSurround Sound  
You can select the tab which you  
want to process with the Down  
movement button and set its level  
with Left/Right movement buttons.  
This is the virtual sound technology. With  
TruSurround, 6 different channels of the  
digital sound are processed in two channels  
and conveyed to the audience through two  
speakers. TruSurround system is used to  
create a virtual surround sound effect in  
environments where there is no 4.1 or 5.1  
speaker systems exist.  
7.1.1-Balance  
To adjust the sound balance between the  
right and left loudspeakers to the desired  
level, select the BALANCE tab in the sound  
menu by using the Down movement button.  
Using the Left/Right movement buttons  
adjust this option to the desired level.  
TruSurround is a registered  
trademark of the SRS Labs. Inc.  
TruSurround XT technology is covered  
under the license of SRS Labs. Inc.  
SRS  
7.1.2-Sound Type  
TruBass  
ON  
ON  
The program you watch may be broadcast  
in stereo or in two different languages.  
Using the Right/Left movement buttons in  
this menu, you can select Mono/Stereo or  
Dual-I/Dual-II languages. Note this is only  
when using Analogue TV. This feature is not  
normally used in UK.  
Dialog Clarity  
BACK  
CHANGE  
7.1.3-Sound Mode  
7.1.6.1-TruBass  
Sound mode can be set as NORMAL or  
SPATIAL by means of direction buttons.  
Spatial option gives depth to the sound of  
the program.  
TruBass system is a signal processing  
technology that reinforces the bass sounds.  
Download from Www.Somanuals.c1om8. All Manuals Search And Download.  
PICTURE  
7.1.6.2-Dialog Clarity  
BRIGHTNESS  
CONTRAST  
COLOUR  
SHARPNESS  
DNR  
COLOUR TEMP.  
MPEG NR  
ACTIVE CONTRAST  
BACKLIGHT  
This feature enhances the understandability  
of the speeches in dialogues.  
Note:When the SRS is set to ON, AVL and  
EQUALIZER functions will automatically be  
set to Off.  
HIGH  
NORMAL  
LOW  
OFF  
7.1.7-Equalizer  
CHANGE  
BACK  
Select the EQUALIZER tab in the Sound  
menu and confirm with the OK button. The  
Equalizer menu is displayed.  
You can select the desired setting by  
pressing the Up/Down movement  
EQUALIZER  
buttons and adjust their levels with Right/  
Left movement buttons. You can adjust  
BRIGHTNESS, CONTRAST, COLOUR  
and SHARPNESS levels as you desire.  
The changes you have made in the picture  
settings will be stored in the memory without  
requiring any other operations.  
MUSIC  
SPORTS  
CINEMA  
SPEECH  
USER  
BACK  
CHANGE  
7.2.2-DNR (Noise reduction)  
You may reduce interference and noise  
formed in the picture by using this feature.  
Select DNR tab in the Picture menu with the  
Up/Down movement buttons to activate  
this feature and select one of the OFF,  
LOW, MID or HIGH options with Left/Right  
movement buttons.  
Using the Left/Right, Up/Down movement  
buttons, you may select either one of the  
preset MUSIC, SPORTS, CINEMA and  
SPEECH options which enhance the sound  
effect depending on the feature of the  
program you are watching or the USER  
option which you can adjust as you desire.  
To adjust the User option, select USER  
and press the Right movement button. You  
can adjust the frequency levels with the Up/  
Down movement buttons. You can select one  
of the 120Hz, 500Hz, 1.5KHz, 5KHz and  
10KHz frequency bands with Right and Left  
movement buttons. Press the MENU button  
to store the settings and exit the user option.  
You may exit the equalizer menu by pressing  
the MENU button again.  
7.2.3-Colour Temperature  
You can adjust the colour temperature with  
this feature. Move to the Colour Temperature  
tab in the Picture menu by pressing the  
up/down movement buttons and select  
WARM, COOL or NORMAL by pressing  
the right/left movement buttons.  
7.2.4-Tint  
When NTSC video is input via Scart, you  
may make Hue settings. The tint option is  
not seen in the menu when you have not  
input this type of a video. When a NTSC  
video is connected via the Scart, this option  
becomes active and it is available in the  
menu.  
Note: You can select the equalizer options  
directly by pressing the ( ) button on your  
remote control.  
7.2-Picture Menu Settings  
7.2.1-Picture Menu  
7.2.5-Active Contrast  
You can perform other picture  
settings by entering the Picture  
menu. For this, press the MENU  
button on your remote control. Select  
PICTURE by pressing the Up/Down  
movement buttons from the main  
menu and press the OK button. The  
Picture menu will be displayed.  
This feature allows making brightness  
settings according to the picture. A brighter  
or dimmer picture can be sent to the screen  
according to the brightness level of the  
picture. Thus, a wider effect is obtained in  
terms of contrast.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.2.6-Backlight  
7.2.9.1-Auto  
With this feature, you can adjust the intensity  
of light reflected to the LCD Panel. Select  
Backlight by pressing the Up/Down  
movement buttons and adjust the desired  
level by pressing the right/left movement  
buttons.  
Some movie channels may broadcast in  
the 16:9 format. If you would like to see this  
format automatically, then select AUTO.  
In that case, AUTO 16:9 appears on your  
screen.  
Note: If your TV is equipped with Active  
Contrast feature and this feature is set to On,  
then Backlight tab is not displayed in the  
menu.  
7.2.9.2-16:9  
7.2.7-MPEG NR  
Please use this setting for watching wide  
screen DVDs, wide screen video cassette  
or 16:9 formatted broadcasts. Since various  
screen formats such as 16:9, 14:9 and etc.  
are used, black stripes might be formed on  
the lower and upper parts of the screen.  
You may remove the artifacts that  
appear in the picture as square shaped  
blocks by using this feature except in  
the Tuner mode.Select Mpeg NR tab  
from the Picture menu with the up/down  
movement buttons to activate this feature  
and select one of the OFF, LOW, MID or  
HIGH options with right/left movement  
buttons.  
Note:MPEG NR feature appears in the menu  
for all sources except the Tuner mode.  
7.2.9.3-14:9  
7.2.8-Picture Smart  
This is a movie format.  
You can select either one of the  
three non-adjustable settings in the  
memory or one of the user options  
by pressing the “( )“ button on  
your remote control. SOFT, NATURAL,  
RICH are default values; USER represents  
the values you stored in the memory.  
7.2.9.4-4:3  
7.2.9-Picture Format  
Use this setting to watch the broadcasts in  
the 4:3 format.  
With this option, you can view the  
broadcast you watch in a format  
of your choice. You may view  
broadcastings in either AUTO,  
16:9, 14:9, 4:3, LETTERBOX, SUBTITLE  
or PANORAMA formats. 16:9, 14:9 or 4:3  
formats can be selected in PC modes. In  
that case, the name of the selected picture  
format will be displayed in the centre of the  
screen.  
7.2.9.5-Letterbox  
While watching a “16:9 or Cinemascope  
formatted” film or video cassette, this setting  
will eliminate or minimize the black stripes on  
the background by zooming in the picture  
without diffusing it.  
Note: In PC Mode, 4:3, 16:9 and 14:9  
picture formats are supported in 16:9  
panels. Only 4:3 picture format is supported  
in 4:3 panels.  
Download from Www.Somanuals.c2om0. All Manuals Search And Download.  
7.2.9.6-Subtitle  
7.3.1-Timer  
If the subtitles are transmitted in the “16:9  
formatted” broadcast, then this setting will  
push the picture upwards in order to ensure  
the entire written text to be seen.  
Your television is equipped with the feature  
of being able to be turned off and on at  
periods that you specify. Select TIMER by  
pressing the Up/Down movement buttons  
and press the OK button in order to have  
your TV turned off at the end of a desired  
period. The Timer menu will be displayed.  
TIMER  
CLOCK  
ON TIME  
OFF TIME  
ON TIMER LİST  
SOURCE  
13 : 04  
- - : - -  
- - : - -  
DIGITAL  
P001  
7.2.9.7-Panorama  
This setting will enlarge the image to fit the  
screen by stretching the image horizontally  
while holding the correct proportions at the  
centre of the image. Some distortion may  
occur.  
BACK  
CHANGE  
Time data is obtained from Teletext; if no time  
data is available then select TIME with the  
up/down movement buttons and enter the  
current time with numeric buttons. Select the  
ON TIME and OFF TIME for television in the  
same manner and specify the time. Enter the  
program number you desire or the external  
source with the AV button into SOURCE  
tab to specify the channel or source from  
which you would like the TV to be turned-on  
to. At the end of the time you specified, your  
television will automatically switch to stand-by.  
If the on time for TV is specified in the Menu,  
the TV will switch to the selected program or  
to the external source at that time; if the TV is  
in standby mode, then it will be turned on with  
the selected channel or external source.  
Note: Since the use of certain functions  
in order to change the picture sizes for  
collective projection or commercial purposes  
(modifying the height and width etc.) will  
be deemed an infringement of the picture’s  
copyright, legal proceedings can be carried  
out as required under relevant laws.  
7.3-Features Menu Settings  
Press the MENU button on your  
remote control. Select FEATURES  
tab by pressing the Up/Down  
movement buttons and press the  
OK button. The Features menu will  
be displayed.  
7.3.2-Child Lock  
If this feature is turned On, the program  
FEATURES  
currently being watched becomes locked,  
the image and sound goes off and the locked  
symbol appears on the upper left corner of the  
screen. The locked channel is skipped when  
you channel search with PR+, PR- buttons.  
TIMER  
CHILD LOCK  
ACTIVE ANTENNA  
AUTO SCART  
DIGITAL FEATURES  
OFF  
OFF  
ON  
Note: Child lock feature is for Analog mode  
only. Child lock tab does not appear in the  
menu in Digital mode.  
BACK  
SELECT  
7.3.3-Active Antenna  
You can select the titles for which you would  
like to perform an operation in Features  
menu by using the Up/Down movement  
buttons.  
When switched ON in the menu it will provide  
5V DC via the aerial socket and can be used  
to supply aerials with mast head amplifiers  
included that require a DC supply.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIP screen when HDMI1 is displayed on the  
main screen.  
Note 3: Right and left movement buttons do  
not control the volume in PIP, PAP and PAT  
modes. They can only be used to change  
the source.  
7.3.4-Auto Scart  
When this feature is set to On and when you  
operate an external device that is connected  
to your LCD television via scart, TV will  
automatically switch to AV mode where  
the device is connected. When it is set to  
Off, your TV does not switch to the external  
device automatically.  
7.4.3.1-PIP Position  
With this option, you can change the display  
position of the PIP screen. You can change  
the position of the PIP screen in clockwise  
by pressing the Pos button when there is a  
PIP picture on the screen.  
7.4-Other Picture Features  
7.4.1-Zoom  
Press the ZOOM button on your  
remote control while watching a  
channel to activate this feature.  
During the zooming process, the  
image is zoomed in in three stages  
oriented to the centre. To move the  
picture in this mode, you can use  
Up/Down or Right/Left movement  
buttons on your remote control.  
Note: Zoom mode does not function  
with COMP/HDMI/PC inputs. Zoom  
mode is aborted when the channel is  
changed or Teletext is activated.  
7.4.3.2-PIP Size  
With this option, you can increase and decrease  
the size of the PIP window. You can change the  
PIP size by pressing the Size button when there  
is a PIP picture on the screen.  
7.4.2-Freeze (Freeze picture)  
You may freeze the program  
picture you are watching with this  
feature. For this, press the FREEZE  
button on your remote control. The  
program picture will freeze until the same  
button is pressed a second time.  
7.4.3.3-Switching the locations of the  
Main screen and PIP screen  
When a sub window is open in front of the  
main window, you can switch the locations of  
the main window and sub window by pressing  
the SWAP button on your remote control.  
7.4.3-Using PIP Feature (Picture in  
Picture)  
Press the PIP button on your remote control.  
PIP screen is displayed. Depending on the  
selected source, a window will be opened  
in the main picture and a sub screen will be  
displayed. You can switch to PAP mode  
by pressing the PIP button again. You can  
return to the TV mode by pressing the PIP  
button when you are in the PAP (Picture and  
Picture) mode. You can use Right/Left  
buttons to change the source in the PIP  
screen when you are in the PIP or PAP  
mode. You can use Up/Down buttons to  
change the channels.  
7.4.4-PAT Mode  
With this feature, you can follow the  
teletext broadcasts simultaneously with the  
current program, provided that the current  
program contains teletext broadcast. For  
this purpose, when you press TXT and  
then 16:9 buttons in a channel with teletext  
broadcasting, the screen will be split into  
two with the left pane showing the currently  
watched program and the right pane will  
show the Teletext at the same time. In the  
event that you wish to exit the PAT mode for  
any reason, simply press the 16:9 button.  
Note 1: Two different channels from the  
Tuner can not be viewed in the PIP screen.  
Only inputs from an external source can be  
viewed in the PIP screen.  
Note 2: HDMI2 can not be selected in the  
Download from Www.Somanuals.c2om2. All Manuals Search And Download.  
Teletext  
8
To be able to receive a quality teletext  
broadcast, a good aerial system and a  
broadcast signal that is not weak, with  
no reflections and interference from other  
channels are required. Even in a very clear  
reception, it is normal for some characters  
or tabs to be lost. Such conditions will  
automatically be improved in a short time  
under normal circumstances.  
8.3-Teletext image in the TV picture  
(MIX)  
With this feature, you can watch  
the teletext information and the TV  
broadcast together. Thus, you can  
follow the teletext broadcast of the  
channel while you watch the TV  
broadcast. To do this, press TXT  
button in a channel with Teletext broadcast.  
8.1-Entering the Teletext Mode  
8.4-Page enlarge button (DOUBLE)  
In a channel that does not have the  
Teletext feature, “NO TEXT” will  
Using this button, you can watch  
the top half of the teletext page in  
an enlarged format. To be able to  
view the bottom half of the enlarged  
page, press the same button for the second  
time. Once you press the same button the  
third time, the page will be restored to its  
normal size.  
be displayed when you press the  
TXT button. In order to switch your  
television to the teletext broadcast,  
please press the TXT button in a program  
that has a teletext broadcast. To switch back  
to the television broadcast, press the same  
button for a second time. Once you have  
switched to the teletext broadcast, the initial  
page that appears will be the index page.  
P100 In this page, the titles of the topics in  
the teletext broadcast and the initial page  
numbers will appear.  
8.5-Page Stop (HOLD)  
Some information is laid out  
by the broadcasting agency in  
multiple pages and it is broadcast  
in an automatic cycle mode. For  
8.2-Page Selection  
example, on a text of four pages, the pages  
are indicated with the figures 01, 02, 03  
and 04 on the bottom of the page. To view  
one of these pages for a longer time, press  
the FAV button. When you press the same  
button again, the cycle continues.  
To be able to view the page you  
would like on the screen, type in  
the number of that page using the  
numerical keys. You can see the  
number you have entered on the left  
side of the upper title tab. When you  
would like to turn the pages one by  
one, you can go to the next page  
pressing the up button and to the  
previous page pressing the down  
button. Press the INFO button to  
return to the Index page.  
8.6-Subpage selection (SUB)  
If the page of text you are viewing  
contains sub pages the page  
numbers starting from 01 appear on  
the screen. You can switch to the  
sub pages with the SWAP button.  
In that case, the sub page tab is  
displayed on the bottom line within  
“Red -” and “Green +” frames.  
“You can select the sub pages by  
pressing the “RED” and “GREEN”  
buttons. You can exit the subpage  
by pressing the SWAP button again.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.7-Temporary TV Picture (UPDATE)  
8.9-Clock  
This button allows you to switch  
to the television picture while the  
page you want is being searched  
in the teletext broadcast eliminating  
the need to wait during the search.  
You may switch to the television  
picture by pressing the ( ) button  
while Teletext is searching for your  
desired page. Once the page you want is  
found, the number of that page appears on  
the screen.  
The Clock function of the SIZE  
button; press the SIZE button when  
you want to check the time while  
watching any television channel. In  
that case, a clock will appear for  
a few seconds on the lower right  
corner of the screen.  
8.10-Fastext  
The coloured buttons on the remote control  
are for the fastext feature. When you select  
any page, the titles on various subjects may  
appear on the screen in four different colours  
or inside coloured frames (red, green, yellow  
and blue). By pressing the button pertaining  
to the relevant colour on the remote control,  
you can access the subject of your choice  
without waiting.  
8.8-Question - Answer Button  
(REVEAL)  
Sometimes, a teletext page  
contains a hidden answer such  
as a game or a riddle. Press the  
EPG button to disclose the hidden  
answer.  
Download from Www.Somanuals.c2om4. All Manuals Search And Download.  
9
External Equipment Connections:  
Your TV is equipped with 10 inputs including aerial input, which allows for the  
external device connection. These inputs are:  
1-Aerial input  
2-SCART1 input  
3-SCART2 input  
4-AV input  
5-S-Video input  
6-PC input  
7-HDMI1 input  
8-HDMI2 input  
9-YPbPr Component input  
10-CI input  
You can connect your external device to your TV via these inputs. By pressing the  
AV button on your remote control, select the external source input to which you  
connected your device.  
9.1-Headphone Connection  
Side view of TV  
The headphones must have  
impedance between 8 and  
32 ohms and have a 3.5  
mm stereo jack plug. Plug  
the headphone jack into the  
headphone socket of the TV.  
9.2-Connecting an external equipment via Scart connection  
VCR  
or  
or  
DECODER  
DVD  
SCART : To watch the picture of the  
broadcast device connected to SCART,  
select Scart from the Source menu and  
press OK button. (You can watch via  
this Scart if the connected device has a  
RGB output).  
SATELLITE RECEIVER  
GAME CONSOLE  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.3-Connecting external equipment via AV connection  
Side view of TV  
CAMERA  
DECODER  
DVD  
AV : To watch the picture of the broadcast  
device connected using the Phono input, select  
AV option from the Source menu and press  
OK button. Your TV will switch to the selected  
source.  
SATELLITE RECEIVER  
GAME CONSOLE  
9.4-Connecting external equipment via S-Video connection  
Side view of TV  
CAMERA  
DECODER  
DVD  
S-Video: To watch the picture of the broadcast device  
connected using the SVHS input, select S-Video option  
from the Source menu and press OK button. Your TV  
will switch to the selected source.  
SATELLITE RECEIVER  
GAME CONSOLE  
9.5-Connecting external equipment via YPBPR connection  
Rear view of TV  
Picture connection  
DVD  
Sound connection  
YPBPR (Component Input): When a connection is made via YPBPR socket,  
select YPBPR option from the Source menu and press the OK button to display  
the picture. Your TV will switch to the selected source.  
Download from Www.Somanuals.c2om6. All Manuals Search And Download.  
9.6-Connecting an external equipment via HDMI connection  
DVD  
Side view of TV  
SATELLITE RECEIVER  
GAME CONSOLE  
HDMI: When a connection is made via HDMI socket, select the HDMI input you  
connected through from the Source menu and press the OK button to be able to  
display these pictures. Your TV will switch to the selected source.  
Connect to the HDMI input at the back of your TV by using the connector located on  
your PC or your digital video-transmission device with a suitable cable (not supplied  
with the TV).  
Note: To be able to watch an image in the HDMI mode, your computer must be  
equipped with a HDMI graphic card.  
You may display the resolution information by pressing the INFO button.  
9.6.1-HDCP (HD Copy Protection)  
Your TV supports HDCP feature. If the HDMI source (HD DVD) is not compatible  
with HDCP standards it may result in no picture or sound.  
NOTE:In HDMI mode; some resolutions are supported when a DVI to HDMI  
converter cable from a PC is used. Only 16:9, 4:3, 14:9 (some definitions) are  
supported as picture format.  
Full HD  
This TV is Full HD. This means that you can view high quality Full HD pictures via the  
HDMI socket or component input when using an HD source such as an HD DVD or SKY  
HD BOX.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.7-PC VGA connection  
Picture connection  
Sound connection  
Rear view of TV  
9.7.1-PC Connection:  
Connect the D-Sub15 connector to the PC-IN socket at the back of your television  
by using an appropriate cable (not supplied with your television). Again, by using  
an appropriate cable, connect the audio output of your PC to the PC AUDIO-IN at  
the back of your television to listen to sounds from your PC and you can adjust the  
volume level of your source by using VOL+/VOL- buttons.  
9.7.2-Switching to the PC mode  
For your LCD-TV to switch to the monitor (PC) mode, press the AV button on your  
remote control. SOURCE menu will be displayed. Select PC option by pressing the  
Up/down movement buttons and press the OK button.  
9.7.3-PC Setting  
Enter into the Setup menu from the main menu by pressing the MENU button in  
the PC mode. In order to make the necessary settings in this menu, you can select  
the tabs with the up/down buttons on your remote control to make the following  
relevant settings.  
9.7.4-AUTOCONFIGURATION  
The most suitable geometric settings in accordance with the entry mode are  
configured by this function. For this operation, just select the Autoconfiguration  
tab and press OK button.  
9.7.5-HORIZONTAL POSITION: Horizontal position setting.  
9.7.6-VERTICAL POSITION: Vertical position setting.  
9.7.7-CLOCK FREQUENCY: This is the pixel clock frequency. User can narrow  
down or enlarge the display by selecting a desired value.  
9.7.8-PHASE: Using the right/left movement buttons, you can ensure that the  
colours and shapes are exactly consolidated on the PC image.  
9.7.9-PICTURE FORMAT  
You can select the PC image to be displayed in 16:9 or 4:3 formats.  
Download from Www.Somanuals.c2om8. All Manuals Search And Download.  
9.8- How To Connect CI (Common Interface) Card  
1- To wiew the scrambled (pay) services in digital TV mode.  
TO INSERT A CI CARD  
(NOTE: The card on its own cannot be used on this TV. A CAM (Conditional Access  
Module) must be purchased and the card inserted into the CAM. The CAM / card  
holder is then inserted into the CI slot on the TV.)  
Insert the CAM / holder card into the slot in the direction of the arrow until it is fully  
located.  
TO REMOVE A CI CARD  
When removing the CI card, make sure you pull out the CAM complete with the  
card fitted.  
This function enables you to watch the scrambled services (pay services) in some  
channels. If you remove the CI Module, you can only watch the available non  
scrambled digital programmes.  
2- Press the Standby button on the remote to turn on the TV.  
3- Press the INPUT button on the remote to display the Source List. Use the Up/  
Down buttons to select DTV, and press the OK button.  
4- If the CI card is inserted properly, the CI MODULE will briefly be displayed on  
screen, The contents are dependent on the CAM provider in you country.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Help and tips  
Failure  
Possible cause  
Solution  
Is the power cord connected to the  
mains supply?  
Check the power cord.  
The television does not function  
Is the On/Off button on?  
Check if the On/Off button is on.  
Is the aerial cable connected?  
Check the aerial cable.  
Aerial may be affected by two  
connected external devices.  
Try disconnecting one of the devices.  
Perform fine tuning.  
Poor picture quality (analogue TV)  
It may need fine tuning.  
Picture settings are not correct.  
Channel setting  
Adjust Brightness, Contrast and  
Colour.  
Perform automatic, manual channel  
setting or fine tuning.  
Shadow and reflection in the  
picture.(analogue TV)  
Aerial misaligned  
Check aerial direction  
Is there any damage to the aerial or  
cable?  
Check and replace the aerial and or  
cable.  
No picture  
No colour.  
Are you sure you pressed the correct  
button on your remote control?  
Press PR+ or PR- button to turn on  
the TV.  
Colour intensity level is at the lowest  
setting.  
Lighten the colour.  
Problem in channel broadcasting.  
Television channel (no teletext) or  
Very weak signal  
Test with another channel.  
Test another channel for fine tuning  
and shadowy pictures  
No or defective teletext  
No sound  
Check the aerial system.  
Temporary sound mute may be on  
Is the sound turned down?  
Are the batteries correctly placed?  
Are batteries exhausted?  
Try pressing the mute button  
Turn on the volume with Vol + button.  
Place the batteries correctly.  
Replace the batteries with new ones.  
If yes, remove it.  
Remote control does not work  
Is there any obstacle between the  
remote control and television?  
Picture is not visible after turning  
on the TV  
Child lock is active.  
Disable the child lock.  
If your television does not work properly even though you tried the above mentioned  
solutions, try turning it on and off again. If you cannot start your television even though you  
have applied all noted methods, refer to the dealer from where you purchased the product.  
Never attempt to repair a faulty device yourself.  
Download from Www.Somanuals.c3om0. All Manuals Search And Download.  
11 Technical specifications chart  
SCREEN SIZE  
32”  
32”, 16:9 Active  
matrix TFT  
Panel type  
Sound output  
2 x 10 W  
140 W  
<1 W  
250  
Power consumption  
Stand by power value  
Teletext page  
Loudspeaker impedance:  
Scart 1  
8 Ohm  
STD  
Scart 2  
STD  
Audio/Video PHONO(Input)  
S-Video socket  
STD  
STD  
YUV (Video/Sound)  
Component Input  
STD  
HDMI 1  
STD  
STD  
HDMI 2  
VGA Input  
STD  
PC Audio Input  
SPDIF Digital sound output  
Headphone socket  
Dimensions (WxDxH)  
Weight (Kg)  
STD  
STD  
STD  
800x200x594  
11,9  
STD: Standard  
General technical specifications  
Power supply AC:  
Program memory Analog:  
RF Aerial input:  
230V 50 Hz  
100  
75 Ohm (Co-axial)  
Mono/Stereo/Nicam  
2xUM - 4, IEC R03 or AAA 1.5V  
VHF (Band I Channel 2-4)  
VHF (Band III Channel 5-12)  
UHF (Channel 21-69)  
Cable TV (S1-S20/S21-S41)  
PAL BG  
Sound systems:  
Batteries:  
Channels received:  
Broadcasting systems received  
PAL SECAM BG  
PAL SECAM BG DK  
PAL SECAM BG LL’  
PAL I  
Note: Your television has been manufactured in accordance with the system available in  
your country and this system cannot be changed by the user except as described below:  
In countries where BG/DK and BG/LL’ broadcasts are made (BG or DK / BG and LL’). For  
further information, see the settings section for your television.  
Design and specifications may be changed without prior notification.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 MAIN UK TRANSMITTER STATIONS  
UHF CHANNELS  
BBCI BBC2 ITV CH4 CH5  
STATIONS CT D  
BBCI BBC2 ITV CH4 CH5 Map  
Regional Main stations  
North West  
Caldbeck  
Map  
30  
55  
68  
34  
62  
66  
28  
59  
48  
32  
65  
56  
56  
48  
56  
12  
15  
45  
Bluebell Hill  
Crystal Palace  
Dover  
Oxford  
East  
Sandy Heath  
Sudbury  
Tacolneston  
Scotland  
Angus  
40  
26  
50  
49  
46  
33  
56  
52  
43  
23  
66  
64  
65  
30  
53  
67  
29  
28  
30  
31  
Winter Hill  
37  
Douglas (IOM)  
North  
Belmont  
Emley Moor  
North East  
Bilsdale West Moor  
Chalton  
Pontop Pike  
Midlands (West)  
Ridge Hill  
Sutton Coldfield  
The Wreckin  
Mindlands (East)  
Waltham  
South West  
Beacon Hill  
Caradon Hill  
Huntshaw Cross  
Redruth  
Stockland Hill  
Channel Islands  
Fremont Point  
West  
Mendip  
South  
Hannington  
Midhurst  
Rowbridge  
22  
44  
28  
51  
25  
47  
32  
41  
56  
37  
17  
16  
31  
51  
62  
27  
44  
55  
24  
41  
59  
21  
47  
65  
39  
35  
52  
25  
26  
24  
33  
39  
58  
26  
45  
64  
29  
49  
61  
23  
42  
54  
35  
14  
11  
13  
56/58  
57  
40  
31  
33  
22  
33  
40  
33  
39  
31  
55  
63  
46  
27  
26  
28  
26  
46  
26  
45  
27  
62  
60  
43  
24  
23  
25  
23  
43  
23  
49  
24  
59  
53  
50  
21  
29  
32  
29  
50  
29  
42  
21  
65  
37  
37  
48  
35  
67  
6
8
7
9
5
49  
1
4
3
2
10  
Black Hill  
Cragkelly  
Darvel  
22  
46  
26  
28  
40  
33  
25  
43  
23  
32  
50  
29  
35  
37  
25  
23  
22  
20  
Durris  
Eitshal (Lewis)  
Keeylang Hill  
Knock More  
Rosemarkie  
Rumster Forest  
Selkirk  
Wales  
Blaenplwyf  
Carmel  
58  
64  
61  
54  
35  
21  
57  
22  
55  
51  
33  
63  
28  
62  
44  
26  
60  
25  
59  
41  
23  
53  
32  
65  
47  
29  
37  
38  
40  
39  
36  
67  
37  
52  
56  
31  
57  
57  
52  
46  
44  
27  
63  
63  
45  
40  
51  
24  
60  
60  
49  
43  
41  
21  
53  
53  
42  
50  
47  
44  
42  
19  
18  
43  
41  
51  
58  
44  
64  
41  
61  
47  
54  
Uanddona  
Moel-y-Parc  
Presely  
37  
35  
35  
37  
Wenvoe  
39  
61  
31  
45  
55  
24  
42  
58  
27  
66  
68  
21  
34  
32  
33  
N.IRELAND  
Brougher Mountain  
Divis  
22  
31  
55  
28  
27  
62  
25  
24  
59  
32  
21  
65  
37  
31  
47  
46  
48  
Limavady  
Download from Www.Somanuals.c3om2. All Manuals Search And Download.  
13 Guarantee - Television  
Your new television is guaranteed against the cost of breakdown repairs for twelve  
months from the date of the original purchase.  
What is covered?  
• All repairs necessary as a result of faulty materials,defective components or  
manufacturing detect.  
• The cost of all functional replacement parts,excluding remote control batteries  
• The labour costs of a Beko approved repairer to carry out the repair  
• You may be offered a replacement instead of repair under guarantee.  
You dealer will advise you.  
What is not covered?  
• Transit or delivery damage  
• Accidental damage  
• Misuse, or abuse.  
• Cabinet or appearance parts,including knobs and flaps  
• Remote control batteries.  
• Repairs or replacements required a a result of unauthorised repairs or inexpert  
installation that fails to meet the requirements contained in the user instruction book.  
• Repairs or replacements to product installed or used on commercial or non-  
household premises.  
Important notes.  
• The product is guaranteed for domestic household use only.  
• The guarantee will be void if the product is installed or used in commercial or non-  
household premises.  
• The product must be correctly installed and operated in accordance with the  
instructions contained within the Operating Instructions Booklet provided with the  
product.  
• The guarantee is given only within the boundaries of the United Kingdom and the  
Republic of Ireland.  
• The guarantee is not transferable if the product is resold.  
• Beko Plc disclaims any liability for incidental or consequential damages.  
• The guarantee does not in anyway diminish your statutory or legal rights.  
Beko House,Caxton Way,Watford,Herts,WD18 8UF,Tel: 0845 600 4911  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13 HOW TO OBTAIN SERVICE  
Congratulations on your choice of a Beko colour television.Your new television has been  
designed and manufactured to the highest quality stadards to give you many years of  
use.To get the best out of it,please take a few moments to read the instruction book.  
Your television is supplied with a full 12 months guarantee,covering parts and labour.  
Should you require service under guarantee,simply call the number below (**see note for  
small screen sets)  
0845 600 4911  
Our service receptionist will ask you for your product model number,your retailer’s  
name,and the date of purchase when you call.It will assist you if you complete the box at  
the bottom of this page when you take delivery of your television so that the information  
is readily available should you need it. If it is necessary for an engineer to visit your home  
he will normally be there within 48hrs of receipt of your call (excluding Bank Holidays) or  
at your earliest convenience.  
Before telephoning for service please check the trouble shooting guide in the instruction  
book as often minor problems are easily identified and resolved by following the  
instructions contained there in.Service visits where there is no fault with the product  
could incur a charge even through the product is under guarantee.  
Service is also available on the above number after the guarantee period has expired.The  
cost of any repairs outside of the guarantee period is payable to the engineer at the time  
of visit.  
Please complete the box below for ease of reference later.  
Model Number  
Serial Number  
Date of Purchase  
Place of Purchase  
Please keep your purchase receipt.The engineer will need to see it should you require service under  
the 12-month Guarantee.  
***Special Note:  
In home repair servicie is not available on models with a screen size of 21” or under.You  
should contact your retailer for advice and assistance on these models..  
Download from Www.Somanuals.c3om4. All Manuals Search And Download.  
V9Z.801  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Modem MIC 3365 User Manual
3M Projector 9000PD User Manual
ADC Stereo Amplifier Tower Mounted Amplifiers User Manual
ADTRAN Server 619510003 1A User Manual
Aiwa CD Player XP V732 User Manual
AKG Acoustics Microphone WMS 300 User Manual
Allied Telesis Switch AT 8500 Series User Manual
Alpine Car Amplifier MRX M100 User Manual
American DJ DJ Equipment 150 RG User Manual
Axis Communications Car Video System M7001 User Manual